DD-Trunnion rotary table for thehighest demands
Aus
gabe
08/
2018
CyTec, the system supplier for machine tools, continious the expansion of his portfolio of products. With the new direct drive rotary table series, the world market leader for milling heads expandes its solution competence for equipping highly productive machining centers. Do to the identical part concept and the in-house production at the company headquaters in Jülich, the workpiece carriers can be adapted to the individual requirements of the machine manufacturers. In case of service a comprehensive service concept ensures a rapid exchange of the systems.
The new rotary tables are available in two series, HT torque for high torques and HS speed for for high speeds. Both are directly driven by torque motors and can also achieve rotary joints. The rotary joint can supply up to ten channels with media such as hydraulic, coolant or air. A media interface can be integrated into the top of the table via plug and play to activate chucks or clamping fixtures. This eliminate special technical and wasteful solutions,
as they are often needed for mechanical rotary tables. High clamping torques allow a stiff and precise positioning of the workpiece for demanding machining operations.In addition, the entire series is available with both a hydraulic or mechanical -air boost clamping system. In the new development of the HT torque and HS speed rotary tables we have consistently oriented ourself to the requirements that are common in the processing of large quantities in the automotive industry, explains CyTec managing director Georg Conzelmann, who has been a long term experience in the rotary table industry.
The user friendly design of the torque motors enable a quickly exchange in case of services, possible. The rotary table is designed in a cartridge system and can be installed as a compact unit by trained mechanics.This means that the exchange takes only a few hours. Costly downtimes are reduced to a minimum.
Neu im Portfolio: die HT Torque und HS Speed Rundtische (Werkbild: CyTec, Jülich)
CyTec Zylindertechnik GmbH Steffensrott 1 • D-52428 Jülich Tel.: (+49) 2461 / 6808-0 Fax:
(+49) 2461 / 6808-758E-mail: [email protected]
http:// www.cytec.de Ausgabe 09/2018
Model Series CRT 630/HVØ Table [mm]: 630 (800)
Turning Torque Speed [Nm]: 1.000
Workpiece load [kg]: 1.000
Speed max. [min-1]: 1.000
Pivot torque [Nm]: 3.000
Total weight [kg]: 1.200
Positioning accuracy ± 5“
Model Series CRT/630/HV
Table (C-Axis)
Ø Face plate [mm]: 630- 800
Motor type: RMHS 360-100 HighSpeed
[Rated/Max. TorqueNm]:Speed 920 / 1.615
Rated/Max. TorqueNm]:Torque 1615
Clamping torque [Nm]: 2800 (6 bar)
Rate Speed [min-1]: 340
Max.Speed [min-1]: 1000
Encoder POS.-Accuracy: Heidenhain RCN 2380 / +/-5"
Plane- Run Out: 0,01°
Trunnion Axis (A-Axis)
Motor Type: 2x RMHT 360-125 HighTorque
Rated / Max. Torque [Nm]: 2980/4780
Clamping Torque [Nm]: 5640 (6bar)
Power consumption [100%]: 6 kW
Max. Speed [min-1]: 80
Encoder POS-Accuracy: Heidenhain RCN 2380 / +/-5"
Swivel Range: +/-120°
Power consumption [kW]: 5kW
Total Weight [kg]: 1280
Power supply: 400V (2x30A+1x70A)