DCNS PROJECT Laser Scanner FARO LS 420 & Model with
InovX PlantX software
Summary :
1. Point Cloud capture : 8 positions
2. Cleaning and assembling point cloud
3. Direct measurements on the point cloud & Colorised scans
4. Model with InovX PlantX software
5. Datas exported to AutoCAD
6. Scan ARM use.
Par Christophe Bénard – Responsable Laser Scanner France
1. Point Cloud capture : 8 positions
2. Cleaning and assembling point cloud
3. Direct measurements on the point cloud & Colorised scans
4. Model with InovX PlantX software
5. Datas exported to AutoCAD
6. Scan ARM use on the no accessible zones with laser scanner LS & points cloud in Geomagic software
Vue de dessus
Comments:
• In the project, it is important to catch a maximum of points cloud to get a maximum of information in the area before to model.
• The ScanARM use is not a big advantage in this case because the area is very small. To grow the scan positions seems to be more profitable (use the LS without tripod).
• InovX PlantX software is used to model and AutoCAD software to work on the model to calculate and create the maintenance on the Marine Boats.
• Demonstration FARO à Brest
• Equipment used: Laser Scanner FARO LS420 + Digital Camera + FARO Scene software+ FARO Scan ARM
• Software used: InovX PlantX
• Contact Faro: Christophe Bénard
• 06.70.21.49.60 [email protected]