Download - Coverpage_Tech.seminar 2013 (1)
-
7/29/2019 Coverpage_Tech.seminar 2013 (1)
1/4
MAHARAJA INSTITUTE OF TECHNOLOGYBehind K R Mills, Belawadi Village, MYSORE.
Affiliated to Visvesvaraya Technological University)
Belgaum, Karnataka 590 014
A Technical Seminar Report
on
OPTIMAL PWM TECHNIQUES
Submitted by Under the Guidance of
Mr/Miss XYZ Chandrashekar Y. L
(4MH07EC001) Prof. & HOD
Department of Electronics & Communication Engineering
MIT, MYSORE
2012-2013
-
7/29/2019 Coverpage_Tech.seminar 2013 (1)
2/4
MAHARAJA INSTITUTE OF TECHNOLOGYBehind K R Mills, Belawadi Village, MYSORE.
(Affiliated to Visvesvaraya Technological University)
Belgaum, Karnataka 590 014
Department of Electronics & Communication Engineering
CERTIFICATE
This is to certify that Mr/Miss. Bearing University Seat Number 4MH07EC001
has successfully completed his/her seminar on the topic OPTIMAL PWM
TECHNIQUES in VIII semester for B.E in Electronics & Communication Engineering
as prescribed by the Visvesvaraya Technological University during the year 2012-2013.
Guide H O D
Mr/Mrs/Miss XYZ Chandrashekar Y.L
Assistant Professor Professor
-
7/29/2019 Coverpage_Tech.seminar 2013 (1)
3/4
MAHARAJA INSTITUTE OF TECHNOLOGYBEHIND K R MILLS, BELAWADI VILLAGE, S R TALUK, MANDYA.
DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING
Date: 14/2/2013
Format for Technical Seminar Report
1 The report should be A4 size, Executive BOND sheets and spiral bound in theprescribed colour of purple for (E&C) department. Report should be one sided
(not back to back), and text must have 1.5 spacing.
2. Borders: Left:1.25 inches, Right:1.0 inch, Top:0.75 inch, Bottom:0.75 inch
3. The prologue (everything before the First Chapter begins.) should contain:
The cover page with necessary details about the report.
Certificates, Abstract.
Table of Contents,
List of Figures,
List of Tables
if required relevant List of Algorithms, List of Acronyms, List ofSymbols etc.
4. Reports should be divided into Chapters, which in turn into sections,
subsections etc.
Chapters have to be numbered 1, 2 ... ,Sections will be numbered 1.1, 1.2.....
Subsections will be 1.1.1, 1.1.2..... .A chapter can contain any number offigures/tables/equations etc. The first figure in chapter 2 will be numbered 2.1.
-
7/29/2019 Coverpage_Tech.seminar 2013 (1)
4/4
5. The "Chapter 1" text should be either left justified. The chapter title shouldbe centred. And they have to be of certain sizes:
Chapter number text: 16pt , Chapter title: 18pt, Section title: 16pt
Subsection title: 14pt, Report text: 12pt
6. The last chapter has to be Conclusions and Future work.
Conclusions. Should contain summary of the work and scope for further work.
In the Future work emphasis should be made on new approach that can bemade to the present work
7. References should be serially numbered in order of their occurrence in the text
and their numbers should be indicated in square brackets. for eg. [3].
8. The report should be Spiral bound with purple colour cover page.
9. The front page should contain important details like
Certificates, Technical seminar report cover page as displayed in the noticeboard
Technical seminar HODCoordinators