Download - CortexTools™ - Code Corporation
www.codecorp.com C007857_02_CortexTools_UserManual
User Manual
CortexTools™Manual Version 02 / CortexTools™ Version 1.3.2
Release Date: December 2013
CortexTools™
www.codecorp.com
CortexTools™ User Manual
Copyright © 2014 Code Corporation.
All Rights Reserved.
The software described in this manual may only be used in accordance with the terms of its license agreement.
No part of this publication may be reproduced in any form or by any means without written permission from Code Corporation. This includes electronic or mechanical means such as photocopying or recording in information storage and retrieval systems.
NO WARRANTY. This technical documentation is provided AS-IS. Further, the documentation does not represent a commitment on the part of Code Corporation. Code Corporation does not warrant that it is accurate, complete or error free. Any use of the technical documentation is at the risk of the user. Code Corporation reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Code Corporation to determine whether any such changes have been made. Code Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. Code Corporation does not assume any product liability arising out of or in connection with the application or use of any product or application described herein.
NO LICENSE. No license is granted, either by implication, estoppel, or otherwise under any intellectual property rights of Code Corporation. Any use of hardware, software and/or technology of Code Corporation is governed by its own agreement.
The following are trademarks or registered trademarks of Code Corporation:
CodeXML®, Maker, QuickMaker, CodeXML® Maker, CodeXML® Maker Pro, CodeXML® Router, CodeXML® Client SDK, CodeXML® Filter, HyperPage, CodeTrack, GoCard, GoWeb, ShortCode, GoCode®, Code Router, QuickConnect Codes, Rule Runner®, Cortex®, CortexRM, CortexMobile, Code, CortexAG, CortexStudio, CortexTools, Affinity®, CortexDecoder.
All other product names mentioned in this manual may be trademarks of their respective companies and are hereby acknowledged.
The software and/or products of Code Corporation include inventions that are patented or that are the subject of patents pending. U.S. Patents: 7072974, 7185824, 6758391, 7392933, 7070091, 7621453. Patents Pending.
The software includes DataMatrix.Net and libusb Libraries. See license.txt in install directory for more information.
Code Corporation, 12393 South Gateway Park Place, Suite 600, Draper, UT 84020
www.codecorp.com
iC007857_02_CortexTools_UserManual
www.codecorp.com
Table of Contents
1.0 - Installing CortexTools™ ........................................................................................................................................... 1
2.0 - Connecting a Reader to CortexTools™ ..................................................................................................................... 3
3.0 - Connecting/Configuring Multiple Readers............................................................................................................... 5
4.0 - Downloading Files from a PC to a Reader ................................................................................................................ 6
5.0 - Capturing an Image ................................................................................................................................................. 7
6.0 - Generating a Data Matrix Barcode .......................................................................................................................... 8
7.0 - Advanced Options................................................................................................................................................... 9
iiC007857_02_CortexTools_UserManual
www.codecorp.com
1.0 - Installing CortexTools™
1. Download CortexTools™ from www.codecorp.com/downloads.php to your PC, open the CortexTools™ software utility folder, and click the Setup icon. (Figure 1)
2. Select Next to start the setup wizard. (Figure 2)
3. Check the ‘I accept the terms in the License Agreement’ box, and click the Next button to continue. (Figure 3)
4. Choose the destination folder you wish to save CortexTools™ to, and click the Next button. (Figure 4)
Figure 1
Figure 2
Figure 3
1
Figure 4
C007857_02_CortexTools_UserManual
www.codecorp.com
5. Click the Install button, and then the Finish button to complete the installation. (Figure 6)
Figure 5
Figure 6
4. By default both CortexTools™ and CodeXML® Device Drivers are selected. (Figure 5) CortexTools™: Select this option if you want to install the CortexTools™ utility. CortexRM™: Select this option if you will be using the CortexRM™ Remote
Manager to maintain firmware versions and custom configurations on your readers.
CortexRM™ requires an additional license. Please contact Application
Engineering at [email protected] for more information and installation support.
CortexWedge™: Select this option to translate serial communication data to
USB Keyboard communication data. Please contact Application Engineering at [email protected] for more information and installation support.
CodeXML® Device Drivers: Select this option to upgrade CodeXML® modems
(Charging Station with embedded CodeXML® modem or the CodeXML® M3 Modem), or to upgrade reader firmware through a CodeXML® modem.
2C007857_02_CortexTools_UserManual
www.codecorp.com
2.0 - Connecting a Reader to CortexTools™
1. Open up the CortexTools™ software utility.
2. For tethered barcode readers, plug the reader into the USB or RS232 port on your PC (Figure 6 ). For wireless readers, plug the Charging Station with embedded modem (or CodeXML® M3 Modem) into the USB or RS232 port on your PC and scan the QuickConnect barcode (Figure 7) to establish a Bluetooth connection.
For RS232 readers, from the COM port tab, select which COM port your RS232 reader is plugged into. (Figure 8)
Refer to either the CodeXML® M3 Modem or wireless reader Quickstart Guide located at www.codecorp.com for more information on establishing a Bluetooth connection.
For RS232 readers, select the COM Port the reader is connected to.
Figure 6 Figure 7
Figure 8
QuickConnect code
3C007857_02_CortexTools_UserManual
www.codecorp.com 4
3. The reader will enumerate to the PC in approximately 10 seconds. Two beeps will occur to indicate a successful enumeration.
For RS232 readers, click the refresh button to enumerate the reader to the PC. (Figure 9)
4. For USB readers, switch the reader from USB Keyboard Mode to Download Mode by clicking the icon (Figure 9). Once the reader is in Download Mode, the reader information will be displayed on the CortexTools™ screen, under Reader Information. (Figure 10)
Switch the reader from USB Keyboard Mode into Download Mode by clicking this icon.
Reader information will be displayed here.
Serial numbers of readers connected to CortexTools™ are displayed in the drop down list.
Figure 10
Figure 9
Refresh button.
C007857_02_CortexTools_UserManual
www.codecorp.com
3.0 - Connecting/Configuring Multiple ReadersMultiple readers can be connected to CortexTools™ simultaneously. To download files or capture an image to/from a single device, select the
reader’s serial number from the drop down list (Figure 10), and follow section 4.0 or 5.0.
1. To begin, follow the steps in Section 2.0 Connecting a Reader to CortexTools™.
2. To download a single file to all readers connected to CortexTools™, click the multiple reader icon (Figure 11), be sure all readers are selected
(Figure 12) and follow Section 4.0, steps 2-3.
Reader serial number drop down list.
Multiple reader Icon.
Select all the readers you wish to manage.
Figure 11
Figure 12
5C007857_02_CortexTools_UserManual
www.codecorp.com
4.0 - Downloading Files from a PC to a Barcode Reader1. To begin, follow the steps in Section 2.0 Connecting a Reader to CortexTools™.
2. Use Open File tab to search the computer for the firmware, or other file type. Click the Download File button to copy the file from the PC to the reader. (Figure 13)
3. The Download File status bar will display the transfer status, and return a Download Complete message once the file has successfully been copied to the reader. (Figure 14)
Click Open File to locate a file on the PC.
File name displayed here.
Click the Download File button to begin file transfer.
Download File Status Bar.
Figure 13
Figure 14
6C007857_02_CortexTools_UserManual
www.codecorp.com
5.0 - Capturing an Image1. To begin, follow the steps in Section 2.0 Connecting a Reader to CortexTools™.
2. Click the Image Upload tab. (Figure 15)
3. Select which image file type you wish to save your image as: PGM or JPEG. If selecting JPEG, select also the image quality value you prefer. (Figure 15)
4. Position your reader, like you are reading a barcode, to capture the image.
5. Choose which field of view you wish to use for your image capture: High Density Field, Wide Field, or the entire image (both high and wide fields) and click on the corresponding button to capture the image. (Figure 15)
Image quality, including distance, brightness, and more, will depend on the positioning of the reader from the image source. Repeat steps 3-5 until the optimal image is captured.
7
Select PGM or JPEG as the file type.
If JPEG, select the image quality.
Select field of view: entire image, high density or wide field.
Figure 15
C007857_02_CortexTools_UserManual
www.codecorp.com
6.0 - Generating a Data Matrix Barcode
1. Click the Barcode tab. (Figure 17), select the Checkbox, and enter the data for your barcode. Select the desired mils size, and click the generate button. (Figure 17)
Barcode Tab
Checkbox
Enter barcode data here.
Click the Generate buttonto create the barcode.
Figure 17
Save the image.
Figure 16
6. Once the image captured is displayed, three tabs will appear: Image Properties, Rotate Image and Clear Image. (Figure 16)
7. Click the Save button, and choose a destination to save your image to your PC. (Figure 16)
8C007857_02_CortexTools_UserManual
www.codecorp.com 9
Save barcode.
2. The created barcode will be displayed. To save the barcode, click the save button, select the destination folder on your PC, and click save. (Figure 18)
3. To copy the barcode to your reader, follow the steps outlined in Section 4.0 - Downloading Files from a PC to a Reader.
7.0 - Advanced Options
To use the Advanced tab options, please refer to the CortexTools™ ICD manual, available upon request from Application Engineering at [email protected].
Barcode displayed.
Figure 18
C007857_02_CortexTools_UserManual