![Page 1: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/1.jpg)
Cooper-Bessemer LSVreconditioning guidelines
![Page 2: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/2.jpg)
Restoring the block, liners and cylinder heads to factory
relational dimensions
![Page 3: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/3.jpg)
Understanding the dimensional relationship of the wear surfaces of the head, to the liner, to the
block
![Page 4: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/4.jpg)
The Relationship• In order to function properly, the block, liners and heads
need to be restored to factory dimensions.• If any one of the three is out of spec. there is a high
potential for a serious coolant leak that can end up in the combustion chamber with serious consequences.
• After years of service all of the contact surfaces wear, and the relationships becomes sloppy.
• Close inspection can reveal serious problems that require attention.
• Factory specs. dictate that all dimensions be within +/- .002”
![Page 5: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/5.jpg)
Head Gaskets
• Its all about the head gaskets ability to seal.• The three head gaskets contact the block,
the liner and the head at the same time.• All three wear and all three need to be
inspected and reconditioned when necessary.
![Page 6: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/6.jpg)
Cylinder Block
• The block usually wears in two serious spots.• 1. The liner height registration step that sits six inches
down from the fire deck wears after years of operation and allows the liners to sink below the deck surface.
• 2. The corner of the liner bore that is inside the head stud circle where the outer head gasket sits.
![Page 7: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/7.jpg)
Outer head gasket seal surfaceLiner height registration step
This wear pattern where the cylinder head has been contacting the deck surface indicates that the liner was sitting below the fire deck surface.
![Page 8: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/8.jpg)
Liners
• The liners wear on all surfaces.• The height registration step that is six inches down
from the top wears and allows the liner to sink.• The top surfaces where the inner and intermediate
gaskets sit wear and cause gasket leakage.• The bottom where the bellows gasket seal
becomes pitted and requires machining.• The lower outside diameter wears allowing the
liner to be loose in the block.
![Page 9: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/9.jpg)
Inner head gasket seal surface
Intermediate head gasket seal surface
![Page 10: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/10.jpg)
Liner height registration step
![Page 11: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/11.jpg)
Cylinder heads
• Heads have three gasket wear surfaces that relate to the liner and cylinder block.
• 1. The outer head gasket groove that contains the gasket that sits on the edge of the fire deck of the block
• 2. The intermediate head gasket groove that contains the gasket that sits on the upper surface of the liner.
• 3. The inner head gasket seal surface that sits n the lower inner step of the liner.
![Page 12: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/12.jpg)
Outer gasket groove Intermediate gasket groove
Inner head gasket surface
![Page 13: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/13.jpg)
• All of these important surfaces will wear over time and will require various methods to build up and machine back to the factory dimensions.
• If any one of them is not reconditioned, the others won’t be able to seal properly.
![Page 14: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/14.jpg)
LNS recommended reconditioning procedures
• 1. Engine block fire deck repairs.• 2. Engine block liner registration step
repairs.• 3. Liner reconditioning.• 4. Cylinder head reconditioning
![Page 15: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/15.jpg)
Fire deck repairs
• Resurfacing the deck surface is costly and unnecessary. The only area that is important is the small .300” wide gasket seal surface inside the head stud circle.
• Our recommended process involves the installation of a replaceable, simple repair sleeve.
• The sleeve can be machined and installed without even removing the head studs.
![Page 16: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/16.jpg)
Boring machines are setup to bore out the damaged edge of thefire deck to accept the repair sleeve
![Page 17: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/17.jpg)
Repair sleeve bore ready to receive the sleeve
![Page 18: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/18.jpg)
The repair sleeve is made oversized to the bore and frozen in liquid nitrogen
![Page 19: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/19.jpg)
The repair sleeve is installed in the bore and expands with a .005” press fit. The top of the insert registers flush to .002” above the fire deck surface
![Page 20: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/20.jpg)
The sleeve produces a new gasket seal surface that can be replacedin the future if necessary without need of machine work.
![Page 21: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/21.jpg)
All cylinders are brought back to standard height with steelrepair sleeves that will wear better than the original cast iron
![Page 22: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/22.jpg)
Liner height registration step repair
• Installing lower liner height registration step repair bushings is expensive and unnecessary.
• The lower steps can simply be machined lower to create a new flat seat surface.
• The new depth should be approximately 6.025”. This is .025” deeper than factory spec.
• The difference is easily made up in the reconditioning of the liners that will require that this step be built up anyway. Adding .025” more is easy and very cost effective.
• This can cut $100,000.00 from the overall cost
![Page 23: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/23.jpg)
The liner height registration step is machined in the same setup as as the upper repair sleeve boring operation to a new depth of 6.025”
![Page 24: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/24.jpg)
Liner reconditioning• The liners are inspected on all critical wear, seal and
registration surfaces.• The cylinder bores are re-chromed back to standard inside
diameter.• Both ends are machined to provide flat seal surfaces.• The height registration step and o-ring steps are metal
sprayed and machined.• .025” is added to the registration step to match the
dimensions of the newly machined engine block.• If necessary, the lower outer diameter can be metal sprayed
and machined back to original diameter.
![Page 25: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/25.jpg)
Liner registration steps are built up with metal spray
![Page 26: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/26.jpg)
Liners are machined on all critical surfaces
![Page 27: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/27.jpg)
Cylinder head reconditioning
• Heads require the gasket seal surfaces be built up and remachined to factory dimensions.
• All valve seats need to be replaced• All valve guides need to be inspected and
replaced if necessary.• Any cracks need to be repaired as well.
![Page 28: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/28.jpg)
The gasket grooves and seal surfaces are roughed out in preparationFor metal spraying
![Page 29: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/29.jpg)
Metco wire spray system is used to buildup the gasket area to bring it back to factory dimensions
![Page 30: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/30.jpg)
Both gasket grooves are brought back to the proper depth and widthand inner gasket step is brought back to the factory height.
![Page 31: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/31.jpg)
If the liner sits low, the step on the block or liner is worn
beyond the acceptable limit
• The outer gasket holds the head up and prevents the two gaskets on the liner from crushing properly.
• Coolant can leak into the combustion chamber
![Page 32: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/32.jpg)
If the liner is worn on any of the head gasket surfaces,
• Coolant can leak into the combustion chamber.
• Compression can leak into the coolant jacket.
![Page 33: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/33.jpg)
If the cylinder head gasket grooves are worn too deep,
• Coolant can leak into the combustion chamber
• Compression can leak into the coolant jacket
• Coolant can leak externally on the fire deck and down to outside of the engine.
![Page 34: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/34.jpg)
They are all dependant upon each other to seal
![Page 35: Cooper-Bessemer LSV - LOCK-N · PDF fileThe Relationship • In order to function properly, the block, liners and heads need to be restored to factory dimensions. • If any one of](https://reader033.vdocuments.us/reader033/viewer/2022052708/5a733f6e7f8b9a98538e6443/html5/thumbnails/35.jpg)
Presented by
LOCK-N-STITCH Inc.
1015 S. Soderquist RdTurlock, CA 95380800-736-8261Fax 209-632-1740locknstitch.com