CONSERVATORYSOLID TILED ROOF
CONVERSIONSThe Complete Guide
0800 0280 675www.twsleeds.co.uk
SO WHY SHOULD YOU CONVERTYOUR EXISTING CONSERVATORY?
...This handy, step bystep guide is designedto help explain themany benefits oflightweight solid tileroof conversions.
2. Introduction
3. Building Regulations explained
5. Key Considerations when carrying outa tiled roof conversion
6. Why it is essential to ensure a solid tiledroof conversion is carried out correctly
7. The many ECO benefits
9. Why you need an experienced installer
SOLID TILED ROOF CONVERSIONSTHE COMPLETE GUIDE01
However, what many of them have found is that some conservatories with poorly performingglass units or polycarbonate roofs are too cold in winter and too hot in summer, making themusable for only a few months a year.
Homeowners, understandably, want a conservatory they can use all-year round, enabling itto fulfil its purpose as an extension of their living space.
Solid tiled conservatory roof systems have been developed to lock in heat during the winterand prevent overheating in the summer. As a result, homeowners are now choosing toupgrade their existing polycarbonate or glass conservatory roofs to lightweight tiled roofs,because they offer better thermal performance, improved energy efficiency and a morecomfortable, useable living space.
This guide aims to give you all the information you need to make an informed decisionregarding your tiled roof conversion.
Not all solid tiled roof conversions are the same!
It is important not to fall into the trap of thinking that all tiled roof conversions are thesame and there are important structural, safety and energy efficiency considerations.There are also certain Building Regulation approvals to be met so it is thereforeessential that your conversion company are credible, reputable and experienced andthat your roof conversion product is both structurally and thermally proven.
SOLID TILED ROOF CONVERSIONSTHE COMPLETE GUIDE 02
INTRODUCTION
Many homeowners have, over the years, takenthe decision to add a conservatory to their home inorder to expand their living space.
BUILDING REGULATIONSEXPLAINED
The Building Regulations in 2010 removed guidance on thedefinition of a ‘conservatory’ so that it was no longer requiredto have an external translucent wall area of at least 50 percent and a minimum of 75 per cent for the roof area.
SOLID TILED ROOF CONVERSIONSTHE COMPLETE GUIDE03
This meant that homeowners were now able to
install a solid tiled roof on their existing structure
without any of the proper safeguards needed to
ensure the job was carried out safely, efficiently
and without risk.
The result was that there were many unregulated
roof conversions, the worst cases being
inexperienced companies simply covering the
existing roof outside with lightweight or even
standard roof tiles and inside with plasterboard.
These existing roofs and frames were simply not
designed to carry the additional load of a tiled
roof, causing major safety issues for homeowners.
Other problems this caused included increased
condensation and little to no increase in energy
efficiency.
Many unregulated roof conversions were carried
out by opportunistic startups looking to cash in
on what seemed like an easy way to make a “fast
buck”. Many of these companies are no longer
around to clean up the mess that they caused.
It's worth noting that reputable, experienced
conservatory installers knew that these types of
conversion were unsuitable and steered well
clear of this type of work.
Even where full lightweight roof conversion
products were correctly specified, many installers
still skipped the important survey and structural
inspections of the existing foundations, walls and
frames for their suitability to carry the additional
load.
• The Building Regulations in 2010removed guidance on the definitionof a ‘conservatory’.
• Unscrupulous companies used thisopportunity to performsub-standard unregulated tiled roofconversions.
• August 2013 – conservatory roofconversions were brought underBuilding Regulation control.
Current Building Regulations
August 2013 saw the introduction of new
guidelines that brought tiled roofed conservatories
under the control of Building Regulations using
the additional guidelines contained within the
“LABC's guidance on solid roofs to conservatories
or porches attached to dwellings”. See LABC
website www.labc.co.uk.
This document brought clarity into a marketplace
that was highly confused not only from the
perspective of the homeowner but also from the
often contradictory viewpoints of different local
authorities, building control offices and installation
companies. We recommend that anyone
undertaking this type of work should read this
document in full.
This offered better protection for customers while
enabling conservatory roofs to be upgraded in a
way that is legally compliant. It is this additional
guidance that a conservatory installation company
needs to adhere to when upgrading to a solid
tiled roof conversion.
Key points:
• If the amount of glazing to the walls or roof was
significantly reduced, the conservatory could no
longer be regarded as exempt from Building
Regulations.
• A replacement or new tiled conservatory roof
system also has to comply with Building
Regulations Part L (Conservation of Fuel and
Power).
• Under the 2013 legislation, Building Regulations
approval should be sought before work is carried
out to convert a translucent to a tiled roof.
It's also important to note that any new structure
must also adhere to the existing 2010 requirements
to be exempt from full Building Regulation control:
Key points for a new build conservatory:
• Must be at ground level and have a floor area less
than 30m2
• Must be thermally separated from the dwelling
by walls, windows or doors that meet energy
efficiency requirements
• The dwellings’ heating system must not be
extended into the conservatory or porch
SOLID TILED ROOF CONVERSIONSTHE COMPLETE GUIDE 04
View PDF View PDF
View PDF View PDF
SOLID TILED ROOF CONVERSIONSTHE COMPLETE GUIDE05
This over and under cladding can presentdifficulties with excess load and alsocondensation damaging the plasterboardand issues with watertightness, issues thatcan only be avoided if the entire roof isreplaced properly.
A properly specified and installed tiled roofsystem will ensure compliance with BuildingRegulations Part L, making the conservatoryhabitable all year round and saving on heatingbills.
Why you need a structural assessmentA structural assessment is required to ensurethat the existing conservatory foundations, wallsand frames are strong enough to withstand theload of a replacement tiled roof.
A tiled conservatory roof cannot simply beplaced over an existing conservatory.
• Local Authority Building Control (LABC)recommends that installers check thestrength of the structure by drilling pilotholes into the vertical supports, or by usinga magnet to see whether there is a steel corein place.
• LABC proposes that conservatoryfoundations comprise a 150mm thickconcrete strip or reinforced concrete slab.
• Foundations passing over drains, close totree roots or on filled ground may requirefurther consideration.
KEY CONSIDERATIONS WHENCARRYING OUT A TILED ROOFCONVERSION
Some installers will still advise simply fitting tiles on topof an existing roof and fitting plasterboard internally.
• In some instances, the conservatory mightneed new window frames to support the weightof a new tiled roof. It may also be possible tomake existing frames more rigid, dependingon the strength of the existing conservatory.
• The structural integrity of a conservatory isvitally important. The roof has to withstandchanges in weather, ranging from being loadedwith snow to pressure from high winds.
Problems can be avoided by undertaking athorough inspection of the conservatory. If thisis not carried out correctly and any remedialactions are not taken at this stage of the process,it could lead to a wide range of avoidable problemsfor homeowners further down the line.
Key points
• Any conservatory needs to be assessedto see whether it can carry a new tiledroof
• Foundations, walls and frames mustbe strong enough to support the weight
• Cutting corners when it comes to
conservatory roof conversions could lead to
issues later on.
• Mortgage lenders are now more rigorous in
their assessments of customers and the
properties they intend to purchase, which
means that they may send a surveyor to
assess a property. Buyers may also choose
to commission their own building survey.
• Any regulations that have been bypassed
may cause problems and in extreme
situations, the conservatory may need to be
removed before a sale can go ahead.
• Buyers could be deterred from purchase of
a property if a conservatory has not been
built to the required standard.
WHY IT IS ESSENTIAL TO ENSURE ASOLID TILED ROOF CONVERSION ISCARRIED OUT CORRECTLY
A much better approach is to ensure right from
the start that your solid tiled roof conversion has
been carried out to meet Building Regulation
guidelines. This ensures that you are protected
from sub-standard work and you benefit from a
comfortable, all-year round living space that is
energy efficient to meet Part L regulations.
Key points
• Selling a property with a conservatory
that fails to meet regulations can be
difficult
• Some conservatories may need to be
removed if they fail to meet standards
SOLID TILED ROOF CONVERSIONSTHE COMPLETE GUIDE 06
THE MANY ECOBENEFITS
Why replace your glass or polycarbonate roof
with a lightweight tiled roof system?
There are many benefits of converting yourexisting conservatory roof to a new lightweighttiled alternative, one of the main reasons beingthe improved energy efficiency offered by a solidtiled roof conversion.
If your conservatory has a glass roof that is morethan a few years old, or a roof made frompolycarbonate panels, then replacing it with amodern, lightweight tiled roof system is the bestway to making the your conservatory more eco-friendly. See the comparison on page 9.
“Almost half the CO2 emissionsin the UK are produced bylighting, heating or cooling ourhomes and offices”
SAVE ENERGY AND REDUCEYOUR HEATING BILLS!
25 per cent of heat in a home typically escapes
through the roof
The u-value of a lightweight tiled roof conservatoryis around 0.17w/m2K, which is far better than it wouldbe with a traditional, glazed or polycarbonateconservatory roof - and meets Building Regulations'requirements. This is because lightweight tiled roofshave high performance insulation integrated into thestructure to lock heat inside your conservatory.
Being fully insulated means that your conservatoryno longer needs as much heat in winter or coolingin summer therefore making the space moreenjoyable and saving you money all year round.
You’ll also be doing your bit for the environment too,by conserving energy and so reducing your home'scarbon footprint.
SOLID TILED ROOF CONVERSIONSTHE COMPLETE GUIDE07
SOLID TILED ROOF CONVERSIONSTHE COMPLETE GUIDE 08
A conservatory with acorrectly specified and
installed lightweight tiled roofconversion can be up to
10xmore thermally efficient than
a conservatory with astandard polycarbonate roof.
Typical standard conservatory heat map
Typical Lightweight tiled roof heat map
Thermal image for illustration purposes only.
WHY YOU NEED ANEXPERIENCED INSTALLER
One who works with Qualified Chartered Surveyorsand your local building control authority to provideyou with a Building Regulations certificate ofcompletion ensurring:
• full structural integrity• thermal efficiency
It is essential to find aninstaller that is highlyexperienced in this typeof work.
SOLID TILED ROOF CONVERSIONSTHE COMPLETE GUIDE09
Key points
• Any legitimate roof installer should givelocal authorities the opportunity toinspect the project to ensure it fullyconforms to all the necessary guidelines.
• A reputable, experienced installer willdeal with all of the Building Regulationrequirements and with the local authorityon your behalf.
• Be aware that a reputable installershould carry out a comprehensivestructural survey before replacing apolycarbonate or glass roof with a tiledroof system.
BEFORECONVERSION
JUST 3 - 4DAYS LATER
SOLID TILED ROOF CONVERSIONSTHE COMPLETE GUIDE 10
0800 0280 675CALL FREE
LINES OPEN 9AM-9PM 7 DAYS A WEEK
Copyright 2015 © TWS (Selby) Ltd.
www.twsleeds.co.ukEmpress House, Newhold Industrial Estate, Garforth, Leeds LS25 2LD