Cone-ring flexible couplings
Heavy and Medium duty
Driving half Driven half
Selection of Coupling
kW capacity required = kW to be transmitted x service factor.
Nature of Load from Driven Machine withElectric Motor Prime Mover
Uniform Moderate Shock Heavy Shock
Service Factor 1,00 1,25 2,00
For applications in ambient temperatures above 121°C consultDavid Brown.
Max. kW at 100 r/min x 9550Max. Torque Capacity (N.m) = —
Each size is capable of 100% momentary overload. Where adrive is subject to a cyclic variation of torque, the coupling sizeshould be referred to us for verification.
Conversion FactorsMillimetresto inchesIb. ins. to N.mkgtolb.
Divide by 25,4Divide by 8,85Divide by 0,45
The NYLICON Coupling range covers bore sizes below those shown here. Details in publication E.304.11.The GEAR TYPE Coupling range covers load capacities greater than those shown here. Details in publication E.304.24.
Size
01020304050607080910111213141R
1617181920
Max.Bore(mm)
38424860708090100120140150170180200230255280305330355
Load CapacityMax. kW per 100 r.
Rough Medium HeavyBore(mm)
1520252525252540404050506565KB•0
,S2DCT13
<
DutyType
0,75
1,11,93,04,310,314,1521,2535,448,5—-—-—-—-——
DutyType
1,52,23,86,08,620,628,342,570,8971261962743566007941059129715661976
p.m.
Max.r.p.m.
yl^OQXV40003400302027002300209017601570139012901090975880790705630590550500
Approx. TotalWeight
Medium HeavyDimensions (mm)A
64708397117127147180206230256296330366406 ̂458508533572610
B
33333333666666666666
C
485661687688100117132147165188210236264292311324330366
D
134147171193215254279330371419457533597660737 X82692799010671155
E
141417,517,517,5303030464646636363767676767676
F
2828414141565657767676919191122122122122122122
H
28202825185156285346285123105618_———
Duty(kg)
67
111619394976
119153_
—_
__
_———
Duty(kg)
67
11162040517712415819434543053581011061445166019702440
NumberofPins
Med.Dty.
3434545656————_
—_-——
Hvy.Dty.
68681081012101214 —101214121416182022
Sizes 01 to 05 have three Cone-rings on each pin. Sizes 06 to 20 have four Cone-rings on each pin.
As improvements in design are continually being made, this specification is not to be regarded as binding in detail and dimensions are subject toalteration without notice.
Publication SA 120 Magnaprint 09103(10)
