Complete machining between centers
TurningHard Turning
GrindingMilling
Machine the entire workpiece in one setup.
With spring loaded center.
● Mechanical clamping system with compensating drive pins● Minimal center runout due to extended guide length on center● Clamping force is transmitted by the tailstock● The center point is mechanically locked when in the clamped position● Accurate within 0.0004” to 0.0008” TIR● High driving torque ● Extended service life of the center and drive pins due to its rigid construction ● Driving diameters from .24” to 6.7”● Work pieces up to 20” in diameter and over 6000 lbs in weight● User friendly and maintenance free operations
FACE DRIVER
Mounting flange with dead true position.
● Safe, reliable and fast mounting options for face drivers● For machine spindles type A2-5; A2-6; A2-8; A2-11; A2-15 and for special spindles ● For all chuck manufacturers● Also available hardened
Type SB with morse taper or straight shank.
Type FSB with flange mount.
Illustration shows driver FSB with mounting flange.
Type ZFMOUNTING ADAPTERS
FACE DRIVER Type FFB
Power operated with fixed center.
● Mechanical clamping system and zero runout center for maximum workpiece support● Fixed center point● Accurate within .00008” to .0002” TIR● High driving torque● Clamping force via actuating cylinder and tailstock ● Extended service life of the center and drive pins due to its rigid construction ● Driving diameters from .24” to 6.7”● Work pieces up to 20” in diameter and over 6000 lbs in weight
Type FFP with driving disk
● For continuously high driving torque● And small driving diameters● Quick change and interchange- able drive disk diameters
Type FFB for hard turning
● Longer life of the drive pins due to the design and coating● Hard turn parts from HRC 58-62
Type FFBR for grinding
● Retractable drive pins● Maximum performance for automated production● Diamond coated drive pins for hard workpieces● Dead zero to the driver flange● Run out accuracy within .00008” to .0002” TIR
Type FBS for grinding
● Simple assembly via morse taper mount● Dead zero to driver head● Run out accuracy within .00008” to .0002” TIR ● Diamond coated drive pins for hard workpieces
Type FFBH
● With hydraulically compen- sated drive pins (no side loads to the center pin)● For highest TIR – demands● Constant datum point ● Drive pins compensate inde- pendently for irregular work- pieces
ULTRA LIVE CENTER Type RN
For best performance with face drivers and high trust operations.
● High rigidity of the center cone● For turning and grinding operations● Designed to withstand high axial and radial loads● Accuracy to within .00008” TIR● Multiple roller bearing design within a sealed housing● Maintenance free● Longer life due to continual improvements and knowledge of live centers
Type RNC extended (or tracer) center point
Type RN-SCH for grinding applications
Type RNW with interchangeable inserts
Type RNA with interchangeable center cones
Form B
Form C
DEAD CENTERS
Type FN Type DIN 806 E (910 11)
Type FNA
Type FNW
Type DIN 806 HE (911 06)Type FNC
Type DIN 807 E (912 11)
Type DIN 807 HE (913 09)
For tubular workpieces.
● Through hardened driving head● Edges re- grindable● Replaceable driving head● With mounting flange for spindle flange or morse taper mount● Large clamping ranges.
PIPE DRIVER Type NDG
● With full carbide point
● With half carbide
● With full carbide point and extraction nut
● With half carbide and extraction nut
Headstock Tailstock
SPECIAL APPLICATIONS Type SFFB
Type FDNC
Pipe driver NDG and tail-stock center support with large cone form.
● Flange mounting morse taper● Spindle mounting flange type ZF with micro adjustment
SFFB Face driver.
● With counter balance weight● Specific workpiece position● Workpiece driven by power actuated drive pins ● For ”Crankshaft” Style parts
FDNC face driver for milling/hobbing.
● With spring loaded center pin● With optional coolant flush
TURN WITH NEIDLEIN
Logansport Matsumoto Company
P.O. Box 7006, 1200 W. Linden Ave., Logansport, IN 46947-7006Phone 574-735-0225 . Fax 574-722-6559www.logan-mmk.com . E-mail [email protected]
LMC Your Workholding Solution!