-
C O M B I V E R T
GB INSTRUCTION MANUAL Portable Operator
Mat.No. Rev.
PL58NEB-0000 1B
-
GB - 3
Table of contents
1. Introduction ...................................................................................................51.1 General information ........................................................................................51.2 Validity ............................................................................................................51.3 Qualification ....................................................................................................61.4 Order data .......................................................................................................71.5 Productdescription .........................................................................................7
2. Hardware .......................................................................................................82.1 Descriptionoftheoperator .............................................................................82.2 Internalflashmemory ...................................................................................102.3 Externalmemorycard(notatBASICversion) ..............................................102.4 Systemfiles ..................................................................................................102.5 Accumulatoroperation ..................................................................................112.6 Wirelessoperation ........................................................................................112.7 Real-timeclock .............................................................................................122.8 Technicaldata ...............................................................................................12
3. Software .......................................................................................................133.1 Main menu ....................................................................................................133.2 Operationofthefunctionkeys ......................................................................13
4 Inverter Parameter ......................................................................................154.1 Non-changeableparameters ........................................................................154.2 Changeableparameters ...............................................................................164.2.1 Changingwith„Up“and„Down“ ..................................................................................... 164.2.2 Setselection ...................................................................................................................174.2.3 Numericinput .................................................................................................................18
5. CP Mode ......................................................................................................19
6. Up/Download ...............................................................................................20
7. Work List .....................................................................................................21
8. Operator Parameter ....................................................................................22
9 Parameter Saving .......................................................................................23
10. File Operations ............................................................................................24
11. Settings ........................................................................................................2511.1 Language ......................................................................................................2511.2 Startup mode ................................................................................................2511.3 Fontsize .......................................................................................................2511.4 Fontsize2 ....................................................................................................25
-
GB - 4
Table of contents
11.5 Contrast ........................................................................................................2511.6 Backlight .......................................................................................................2611.7 Fileaccess ....................................................................................................2611.8 Switchofftime ..............................................................................................2611.9 Date ..............................................................................................................2611.10 Time ..............................................................................................................2611.11 Softwareinformation .....................................................................................2611.12 Peakmemory ................................................................................................2611.13 Starttestmode .............................................................................................26
12. Flash Functions ..........................................................................................27
13. Communication ...........................................................................................2813.1 DIN66019II ....................................................................................................2813.2 HSP5 ............................................................................................................2813.3 Wireless(notatBASICversion) ...................................................................2813.4 USB ..............................................................................................................28
14. Applications ................................................................................................29
15. Password Protection of the KEB COMBIVERT ........................................30
16. Error .............................................................................................................31
-
GB - 5
Portable Operator
1. Introduction
1.1 General informationBeforeworkingwiththeunittheusermustbecomefamiliarwithit.Thisincludesespeciallytheknowledgeandobservanceofthesafetyandwarningdirections.Thepictographsusedinthisinstructionmanualhavefollowingmeaning:
Danger Indicatesdangertolifebyelectriccurrent.
Warning Indicatespossibledangertolifeordangerofinjury.
Note Indicatestipsandadditionalinformation.
1.2 ValidityThismanualaswellasthespecifiedhardwareandsoftwarearedevelopmentsoftheKarlE.BrinkmannGmbH.Errorsandomissionsexcepted!TheKarlE.BrinkmannGmbHhavepreparedthedocumentation,hardwareandsoftwaretothebestoftheirknowledge,however,noguaranteeisgiventhatthespecificationswillprovidetheefficiencyaimedatbytheuser.TheKarlE.BrinkmannGmbHreservestherighttochangethespecificationswithoutpriornotificationorfurtherobligation.Allrightsreserved.
Theinformationcontainedinthetechnicaldocumentation,aswellasanyuser-specificadviceinspokenandwrittenandthroughtests,aremadetobestofourknowledgeandinformationabouttheapplication.However,theyareconsideredforinformationonlywithoutresponsibi-lity.Thisalsoappliestoanyviolationofindustrialpropertyrightsofathird-party.
Inspectionofourunitsinviewoftheirsuitabilityfortheintendedusemustbedonegenerallybytheuser.Inspectionsareparticularlynecessary,ifchangesareexecuted,whichserveforthefurtherdevelopmentoradaptionofourproductstotheapplications(hardware,softwareordownloadlists).Inspectionsmustberepeatedcompletely,evenifonlypartsofhardware,softwareordownloadlistsaremodified.
-
GB - 6
Portable Operator
Inspection by theuser
Applicationanduseofourunits inthetargetproductsisoutsideofourcontrolandthereforeexclusivelyintheareaofresponsibilityoftheuser.
Use under specialconditions
TheusedsemiconductorsandcomponentsofKEBarede-velopedanddimensionedfortheuseinindustrialproducts.IftheKEBCOMBIVERTisusedinmachines,whichworkunderexceptionalconditionsorifessentialfunctions,life-supportingmeasuresoranextraordinarysafetystepmustbefulfilled,thenecessaryreliabilityandsecuritymustbeensuredbythemachinebuilder.
1.3 QualificationAllworkfromthetransport,toinstallationandstart-upaswellasmaintenancemayonlybedonebyqualifiedpersonnel(IEC364and/orCENELECHD384orDINVDE0100andnotenationalsafetyregulations).Accordingtothismanualqualifiedstaffmeansthosewhoareabletorecogniseandjudgethepossibledangersbasedontheirtechnicaltrainingandexperienceandthosewithknowledgeoftherelevantstandardsandwhoarefamiliarwiththefieldofpowertransmisssion(VDE0100,VDE0160(EN50178),VDE0113(EN60204)aswellasthosewhonotethevalidlocalregulations).
Danger by highvoltage
KEBelectroniccomponentscontaindangerousvoltages,whichcancausedeathorseriousinjury.Dependingontheprotectivesystemtheycanhave liveparts,brightparts,ifnecessaryalsomovingparts,aswellashotsurfacesduringoperation.Careshouldbetakentoensurecorrectandsafeoperationtominimiserisktopersonnelandequipment.
Firerisk
UnitcontainsLi-Ionaccumulator.Accumulatormaynotbe:• mechanicallydamaged• shortcircuited• throwninthefire/water• loaded externally or at temperature above +45°C
Accumulator/unit iswithdrawnbyKEBafter the endoflifetime.Accumulatormanufacturer in the senseof theGermanbatterylaw:FeyElektronikGmbH,D-21217Seevetal
-
GB - 7
1.4 Order dataPortableOperatorSetWIRELESSwithUSB,HSP5,RS485cables 00.58.060-0010
PortableOperatorSetBASICwithoutaccumulator/radiomodulewithRS485/USBcombicable(suppliedviaDIN66019interface)
00.58.060-0110
Inverterradiomodule,connectionHSP5andDIN66019 00.58.060-0030
TransformercableRJ45/RS485DSUB9,2.5mfortheconnectionto aF5-HSP5interfaceinverter(includedintheWIRELESSset)
00.F5.0C0-4025
AdaptercableRJ45/RS485DSUB9,2.5mfortheconnectiontoaRS485interfaceinverter/operator(includedintheWIRELESSset)
00.F5.0C0-0021
AdapterHSP5DSub/RJ45fortheconnectiontoaHSP5diagnosticinterfaceF5operator(includedintheWIRELESSset)
00.F5.0C0-0020
USBcableconnectorA-B,connectiontoanUSBslot(PCorpowersupply)(includedintheWIRELESSandBASICset)
00.F5.0C4-1010
CombicableRS485withUSB(includedintheBASICset) 00.F5.0C0-0022
1.5 Product descriptionThePortableOperatorhasadisplaywithatextindicator,whichenablesaclearlyrepre-sentationofcomprehensiveinformations,forexampleaparameternamewithitsvalue.Severallanguagesareavailable.Thefour functionkeysareoccupiedvariable. Internalandexternalpossibilityofsavingenablesthetransmissionandstorageofparameterlistsandtherebyafasterprogrammingof inverter.
Thistransmissioncanbemadewire-connectedandwireless(WIRELESSversion).
TheBASICversion issuppliedviatheenclosedcombicablebytheD-Sub9connector.AlternativelyitcanalsobesuppliedwithastandardUSBconnectioncable(typeA->Btype)fromaPC/Laptop.
Thisinstructionmanualdescribesthesoftwarestatusstartingfrom2010-07.
-
GB - 8
F1 F2 F3 F4
ENTER ESC
Hardware
2. Hardware
2.1 Description of the operator
(1) X6A(RJ45)
(2) X6B(USB-B)
(3) LCDdisplay160x160pixel,32grayscalevalue
(4) Functionbar
(5) FunctionkeysF1toF4
(6) Up
(7) ESC
(8) Down
(9) CardslotforSD/MMC
(10) ENTER
(1) CommunicationinterfaceRS485,seealsochapter„Communication“
(5) The function keysF1 toF4are variable as-signed.The assignment is displayed by thefunctionbar.
(2) USB-B(socket),voltagesupply/filetransfer
(6)(8)
With "Up" and "Down" it canbemovedbet-weenthemenuitemsorchangingparametervalues.
(3) The LCD display offers a detailedrepresentationoftheinformationwithaplaintextdisplay.
(7) WithESCa jump to thenextsuperiormenuisdone.
(4) Aflashing functionbar indicatesaninverter error.
(9) CardslotforSD/MMC(notforBASICversion)
(10) WithENTERitcanbejumpedintotheselectedmenuitemoraselectioncanbeconfir-med.
-
GB - 9
X6AcommunicationinterfaceRS485
1 TxD+ Transmissionsignal(A)
2 TxD- Transmissionsignal(B)
3 GND Referenceforsignals
4 RxD+ Receivesignal(A)
5 RxD- Receivesignal(B)
6 PGM ConnectwithGNDforoperation
7 E_TxD+ Handshakesignal(A)
8 E_TxD- Handshakesignal(B)
X6Bvoltagesupply/filetransferUSB-B2.0,5.0Vmaximum,currentinput0.5Amax.
1 +5 V In
2 USB-
3 USB+
4 GND
Hardware
81
12
3 4
AninstalledcardshaftattherightsideservesforinputofSDorMMCmemorycards
-
GB - 10
Hardware
2.2 Internalflashmemory AccesstothismemoryispossibleviadeviceC:. Systemfiles,workandparameterlistsarestoredhere.Observethefollowingparticularities:
● Longfilenamesupto32charactersarepossible.
● Dataarenotphysicallydeleted.Atfirsttheyareinternalmarkedasdeleted.Thustheavailablememorycapacitydecreases.Thecompletememoryisformattednewwiththecommand"format".Alldataareirrevocabledeleted.
● With thecommand"clear" thedeletedmemorycapacitycanbemadeavailableagainwithoutreformatting.
IftheFlashmemoryisformattedduringafirmwareupdate,sothefilesLANGU-AGE.DATandPARAS.BLBmustbecopiedfromtheSDcard.
2.3 External memory card (not at BASIC version) ASDorMMCmemorycardofanycapacitycanbeinsertintotheslotoftheoperating
unit.AccesstothismemoryispossibleviadeviceA:.Anyfilescanbestoredalsohere.Observethefollowingparticularities:
● ThefilesystemisFAT16orFAT32andthuscompatiblytoexternalreadersandWindowsoperatingsystems.
● Itcanbeaccessedonlytofilesinthemaindirectory.
● Longfilenames(upto32characters)arepossible.
● Thewriteprotectionswitch (atSDcards) isconsidered,writingon thecardonlypossibleafterrelease.
2.4 SystemfilesNecessarysystemfiles:
● LANGUAGE.DAT: Textsinalllanguagesfortheoperationoftheoperator
● PARAS.BLB: Parameterfunctionsandnamesforallinverterandoperatorparameters
-
GB - 11
2.5 Accumulator operationOnlyforunitvariantwithWIRELESS:ThePortableOperator contains an integrated Li-Ion accumulator,which supplies theoperatorwhentheUSBcableisremoved.Thisenablesrealmobileoperationatwirelesscommunication.
PressthegreenENTERkeyfor2secondstoswitchontheunit.TheaccumulatorischargedviatheUSBportX6B.Aloadcontrollerpreventsoverloading.Theaccumulatorindicatorinthemainmenuinthefunctionstripleftdisplaysthecapacity(voltagemeasurement)andcharging(runningbar)orlowlevel(flashing).ChargingcanbedonebyPC,laptoporUSBpowersupply.Max.5Varepermissiblehere.Theaccumulatordisplayisnolongervisibleaftercompletecharging.
In order to prevent theaccumulator, several functionsare available in themenu „Set-tings“:• Thebacklightcanbeswitchedofftimecontrolled.• ThecompletePortableOperatorcanbeswitchedofftimecontrolled.• IneithercasethePortableOperatorswitchesoffafterashortnoteatlowaccumulator
load.
TheoptimumtemperatureforoperationandstorageoftheLi-ionaccumulatoris+15°C.Thisenablesthelongestaccumulatorrun-time.
ThePortableOperatorispermanentlyswitchedonduringvoltagesupplyviaUSBsocket,otherwisetheunitcanbeswitchedoffinthemainmenuviafunctionkeyF4,thenF1.
Incaseoffailure,especiallyatrunningcustom-specificapplication,theunitcanbeswitchedoffbysoftwareformorethan10secondsbypressingF1andF4simultaneously.If these software switchoff failure then themain switch in theunit canbe reachedbyopeningthelowerflap(removethescrewforthis).Therebytheaccumulatoriscompletelydisconnected,alsothereal-timeclocklosesitsdata.
2.6 Wireless operationOnlyforunitvariantwithWIRELESS:Theintegratedwirelessmoduleallowssending/receivingofDIN66019IItelegrams.Awirelessconnectiontoone/severalinverterscanbedoneherebyusingoneormorewirelessinvertermodules0058060-0030.Theoperatingmodeisdeterminedviamenu"Communication".Assoonasno"wireless"operatingmodeisadjusted,thewirelessmoduleiscompletelyswitchedoffandthereisnosignificantcurrentsupply.
-
GB - 12
2.7 Real-time clockThePortableOperatorcontainsareal-timeclockwhichissuppliedbytheaccumulator.Atfilegenerationdateandtimeareusedastime-stamp.Custom-specificapplicationshavealsoaccesstothisinformatione.g.fordocumentation.Leapyearsto2099areautomaticallyconsidered.
TheversionBASICwithoutaccumulatorlosesthetimedatawithoutexternalvoltagesupply!
2.8 Technical dataGeneralDimension(HxBxT) 230 x 120 x 50Weight 0.4kgProtectivesystem(EN60529) IP20Operation temperature -10°…45°C,chargeaccumulator:0…45°CStoragetemperature -25°…70°C,accumulator:-25…+50°Coptimum:+15°CClimaticcategory(EN60721-3-3) 3K3
Environment(IEC664-1) Pollutiondegree2Flashmemory 4/8MBytes
External memory SDorMMCmemorycardsofanycapacity
Wirelessmodule2.4GHzISMBand,worldwideusableinaccordancewithEN300440,EN301489,EN60950,EN50371100mfreefielddistance,500kHzbandwidth
Accumulator Li-ion,3.6V,2250mAh,8Wh
Accumulatorrun-time
withbacklightandwirelessoperationapprox.24hwithbacklightwithoutwirelessoperationapprox.40hwithout backlight without wireless operation approx.72h
Accumulatorrechargetime approx.6hoursforemptyaccumulator(0.43Achargingcurrent)
Voltagesupply(viaX6B-USB)
Variantwithoutaccumulator(BASIC):3.0…5.0V,max.100 mA Variant with accumulator (WIRELESS): 5.0 V,max.500 mA
-
GB - 13
Software
3. Software
3.1 Main menu
ENTERJumpintothesubmenu
→
←Returntothemainmenu
F1
The function keysF1 toF4 can be assigned as follows depending on the respectivesubmenu.
3.2 Operation of the function keysDisplay Function
Flash/Card Changebetweeninternalflashmemoryandexternalmemorycard
DecHex Changebetweendecimalandhexadecimaldisplay
Num Numericinput:manualinputofnumbers
Set Changingthesets[Ι],[A]or[0-7]
Select Selectionofaconfigurationfile
Last Selectthelastusedconfigurationfile
Top/Bottom Changebetweenfirstandlastlistitem
Formt 1)
Thecompletememoryincludingthesystemfileisformattedagain.→Dataareirrevocabledeleted
CinUp 1) Makedeletedmemoryspacewithoutnewformattingavailableagain
Delete 1) Deletetheselectedfileofmemorycardorflashmemory
Upload Loadcompletedownloadlistfromcurrentinverter
furtheronnextside
inverter parameterCP modeUp/DownloadWorklistOperator parameterParametersavingFileoperationsSetupFlashfunctionsCommunicationApplications
Off
F1 F2 F3 F4
-
GB - 14
Software
Display Function
Download Storedownloadlistintheinverter
Copy Copyoffilesbetweenflashmemoryandmemorycard
←→ Movetotheleftandright(e.g.atnumericinputorinputoffilenames)
CList Acompleteparameterlistisgenerated
Menu Returntothemainmenu
Yes Processconfirm
+- Thesignischanged
, Apointandafurtherdigitareinserted.
1) Fileaccessispossibledependingonthepasswordlevel,reducedorswitchedoff
-
GB - 15
4 Inverter Parameter
4.1 Non-changeable parameters
Inverter Parameter
Theparametergroupsaredependingontheinverter
F4F2 F3
MenuCListTopBottom
ru run parameteroP operational parameterPnprotectionparametercScontrolspeedparameterdSdrivespec.controlparauFu/fparameterdr drive parametercncontrolparameterEcencoderparameterUduserdefinitionpara.Frfreeprogrammablepara. ▼
F2 F3 F4
Top Bottom
ru00inverterstate[]66forwardconstantru01setvaluedisplay[]153.0001/minru02rampoutputdisplay[]153.0001/minru03actualfrequencydisplay[]15.3000Hzru09encoder1speed[]0.0001/minru10encoder2speed ▼
ENTER
→
←
ESC
ENTER
ESC
F2 F3 F4
DecHex
ru000200hinverterstate
66
inverterstateforwardconstant
Withnon-changeableparameters:
OnlyESCpossible!→Parameternon-changeable!
→
↓ ENTER
Changeableparameterssee4.2
-
GB - 16
Inverter Parameter
4.2 Changeable parameters
4.2.1 Changing with „Up“ and „Down“
F2 F3 F4
Set Top Bottom
oP02rotationsetting[I]0:lowspeedoP03referencesetting[I]0.0001/minoP05referencesetting%[I]0.0%oP06min.referenceforward[I]0.0001/minoP07min.referencereverse[I]-1:=forwardparameteroP10max.referenceforward▼
Set selectionsee4.2.2
F2
←
ESC ↑↓ ENTER
F2 F3 F4
DecHex
oP060306hSet:Imin.referenceforward
0.000 1/min
storeparametervalue
ESC ↑↓ ENTER↑ ENTER
F2 F3 F4
DecHexNum
oP060306hSet:Imin.referenceforward
0.0001/minNumericinputsee4.2.3 Increaseordecreaseparametervaluewith
„Up“and„Down“
F4→←
▲
-
GB - 17
Inverter Parameter
4.2.2 Set selection
Indirectset-programming
F2 F3 F4
Set Top Bottom
oP02rotationsetting [I]0:lowspeedoP03referencesetting[I]0.0001/minoP05referencesetting%[I]0.0%oP06min.referenceforward[I]0.0001/minoP07min.referencereverse[I]-1:=forwardparameteroP10max.referenceforward▼
↓ F2
Directset-programming
F2 F3 F4
Set Top Bottom
oP06min.referenceforward▲[0]0.0001/min[1]233.0001/min[2]233.0001/min[3]233.0001/min[4]233.0001/min[5]233.0001/min[6]0.0001/min[7]0.0001/minoP07min.referencereverse[I]-1:=forwardparameter
F2
↓ F2
Currentset
F2 F3 F4
Set Top Bottom
oP06min.referenceforward▲[A]0.0001/minoP07min.referencereverse[I]-1:=forwardparameteroP10max.referenceforward[I]700.0001/minoP11max.referencereverse[I]-1:=forwardparameteroP14abs.max.referencefor[I]4000.0001/minoP15abs.max.referencerev▼
▲
▲
-
GB - 18
Inverter Parameter
4.2.3 Numeric input
F2 F3 F4
DecHexNum
oP060306hSet:Imin.referenceforward
0.0001/min
F4
F2 F3 F4
+-<-,>>
oP060306hSet:Imin.referenceforward
01/min
→
←
ESC
←
ENTER
Rounduptothenext valid value andwritetotheunit
F2 F3 F4
Thesignischan-ged
Adigitisremoved A point and afurtherdigitareinserted.Thedigitcanbechangedwith"UP"and„Down“.
Withseveralpointsonlythefirstisconsidered!
Thedisplayisextendedbyadigit.Thedigitcanbechangedwith"UP"and„Down“.
-
GB - 19
CP Mode
5. CP Mode
F2 F3 F4
CP00password[0] application passwordCP01LDvoltage[0-7] 375 VCP02softwareversion[0] 2.60CP03softwaredate[0] 501.3
▼
Menu Top Bottom
CP mode
Thedefinedcustomerparametersintheinverteraredisplayed.Operationtakesplaceliketheinverterparameters.
The representationsizeof theparametervaluescanbeadjustedsepa-rately!→see“menu“→“adjustments“→“typesize2“
-
GB - 20
F2 F3 F4
DWN1541.DW5 F5C.dw5F5CAA.DW5 F5C_.DW5 F5G_.DW5
MenuFlashUploadDownload
F2
Back to themain menu
CardThefilepathisonmemorycardandchangestoflash
FlashThefilepathisonflashandchangestomemorycard
F3 Generate-correctionisrequired
F4
Adownload list is loaded fromthecurrent inverterandstoredundernewname
A download list is stored in theinverter
↓ENTER ↓ESC ↓ENTER ↓ESC
F2 F3 F4
F5C.dw5F5C_.DW5
>
Newfilename:F5C_
ENTER:okESC:Cancel
Cancel processconfirmed Cancel
↓ ↓
A digit isremoved
Adigitisadded.Thedigitcanbechangedwith"UP"and„Down“:0-9; _ ; A-Z
↓ENTER ↓ESCAcompleteparameter list canbegeneratedwith"CList"inthemenuitem"inverterparameter".
Procedure confir-med/if necessary"overwrite“inquiry
Cancel
ENTER
Displayoffilename/size/date/time.Sincethereisnoreal-timeclockintegratedintheLCDoperator,newcreatedfileshavethedate01.01.2003.
Up/Download
6. Up/Download
-
GB - 21
Work List
7. Work List
F1 F2 F3 F4
F5.wr5
MenuFlash
ENTER
Displaysof thework listF5.wr5
→
←
ESC
Theselectionofaworklistofthememorycardortheflashmemory(functionkeyF2)occursinthismenuitem.
ThecompilationoftheworklistmustbedonewithCOMBIVIS.
-
GB - 22
Operator Parameter
8. Operator Parameter
TheLCDoperatormustbeconnectedtotheHSP5diagnosticinterfaceoftheappropriateoperatorforrepresentationofoperatorparameters.
Theoperatorcan load theappropriateparameters ifavalidconfigurationnumber isrecognized.Operationtakesplaceliketheinverterparameters.
F2 F3 F4
Parameters for the ope-rator
Top Bottom
EitheraconfigurationfilecanbeselectedviafunctionkeyF2orthelastusedconfigurationfilecanbetakenviafunctionkeyF4ifnoconfigurationnumberisrecognized.
F2 F3 F4
Estimatedeviceconfiguration…
SelectLast
Operator parameternotpresent
-
GB - 23
Parameter Saving
9 Parameter Saving
F1 F2 F3 F4
Saveparameters(Upload)=F3
Writeparameters(Download)=F4
ChangeDrive(Flash/Card)=F2
MenuCardUploadDownload
F3 F4
All inverter and operator parameters (if anoperatorisavailable)arereadoutandsavedin the flashmemory ormemory card.Everynewuploadprocessoverwritesthepre-savedparameterlists.
A download is not possible withoutsaved inverter parameters→ errormessage!
Operator parameters areonlywritteniftheyaresavedintheflashmemoryormemory card and if an operatorison thenew inverter,which is tobewritten.
Fixedfilenamesforsavedparameterlists:
Inverterparameters: %%SAVEFU.DW5
Operatorparameters: %%SAVEOP.DW5
-
GB - 24
File Operations
10. File Operations
F1 F2 F3 F4
File lists on the Flashmemory
MenuFlashCopyDelete
F2 F3 F4 ENTER
Changebetweenthefiles of thememorycardand thefilesoftheflashmemory.
The selected fi leis copied betweenflashmemory andmemory card. Thegenerate-correctionisrequired.Ifthetargetfileisal-readyavailable,alsothedelete-authoriza-tionisnecessary.
Theselectedfileofthe memory cardor theflashmemo-ry is deleted. Thedelete-authorizationisnecessary.
Displayoffilename/size/date/time.
Anautomatic "clearing" isdone ifnotenoughmemory isavailableduringcopyingfilestotheflashmemory(seechapt.2.2).
-
GB - 25
Settings
11. Settings
F1 F2 F3 F4
Language EnglishStartup mode MenuFontsize 13Fontsize2 24Contrast 24Backlight OnFileaccess Off0SF5AK01000 Jan92008PeakMemory 67%59%StarttestmodeMenu
Tostorechangesnon-volatile,a return to themainmenu is requiredwiththeF1key.
11.1 LanguageAlanguageisselectedforthemenuandtheparameters.IftheselectedlanguageisnotavailabletheparametersaredisplayedinEnglish.
11.2 Startup modeThestartupmodedeterminesthemenuitemafterinitializationoftheoperator.
11.3 Font sizeItcanbeselectedbetweenfontsizes8.10.13.16and24inthedisplay.Exception:see„fontsize2“
11.4 Font size 2ThefontsizeforthedisplayofparametervaluesisspecifiedintheCPmodeandintheworklist.
11.5 ContrastThecontrastadjustmentsoftheLCDdisplaycanbechangedwithintherangeof0to50.
-
GB - 26
Settings
11.6 BacklightIfthebacklightdisplays„on"itisgenerallyswitchedon.Ifthebacklightisadjustedto"out"it isgenerallyswitchedoff.Ifthebacklight isadjustedto"auto", it isswitchedonduringpressingakeyandswitchedoffagainafter10secondsifnokeyispressed.
11.7 File accessThefollowingpossibilitiesareavailabletodeterminethefileaccess:
Display Function Password
Off Filescannotbegeneratedordeleted 0
Create Filescanbegenerated 55
Create/Delete Existing files can be generated, deleted or over-written 345
11.8 Switch off timeAdjuststhedisconnectingtimeoftheunitwithoutpressingakey.Thisfunctioncanalsobesetto0(off).Thentheunitisonlyswitchedoffwithemptyaccumulator.NOswitchingofftakesplacewhenconnectingavoltagesupplyviaUSBport.
11.9 DateEnablesthedisplayandinputoftheactualdate.ThekeysUp/Downchangefirsttheday.Switchingtomonth yearandreturntodaywithfunctionkeyF4.
11.10 TimeEnablesthedisplayandinputoftheactualtime.ThekeysUp/Downchangefirstthehour.Switchingtominute secondandreturntohourwithfunctionkeyF4.
11.11 Software informationThedisplayindicatesthematerialnumberandtheoutputdataoftheoperatorsoftware.
11.12 Peak memoryThepeakloadofthetextmemoryisdisplayedfirst.Thepeakloadvalueofthecommuni-cationbufferisdisplayedbehind(thisdisplayisonlyforinformation).
11.13 Start test modeThismodeteststhekeyboardandthedisplay.Followtheinstructionsofthedisplay.
-
GB - 27
Flash Functions
12. Flash Functions
F1 F2 F3 F4
Informations about theinternalflashmemory
Menu Formt ClnUp
F3 Generate-/delete-authorizationisrequired
F4
Thecompletememoryincludingthe system files is formattedagain.→Dataareirrevocabledeleted!
The deletedmemory capacity can bemade available again without refor-matting.
-
GB - 28
Communication
13. CommunicationThePortableOperatorenablesseveralconnectionsandprotocolsforexternalcommuni-cation.TheinterfaceX6Aisprotectedupto24Vagainstoverload/destruction.IfawrongadaptercableisusedremainswithoutconsequencesforthePortableOperator.However,sometransformercablescanbedamagedincaseofmisapplication.
TheHSP5transformercable00F50C0-4025maybeusedonlywithHSP5interfaces!
Thenodeaddressandoneofthefollowingconnectiontypesmustbeadjustedforuse.
13.1 DIN66019IISelectsthewirelineDIN66019IIprotocol.Thenodeaddressselectstherequestedunit.Itmustbeadjustedalsointhetargetdevice.TheconnectionismadeviaX6Aandadaptercable00F50C0-0021,whichusestheRS485interfaceoftheKEBunits.
Alsonetworkingupto30otherunitsispossible.Itisswitchedtoothernodesbychangingthenodeaddress.Thebaudrateisself-detectedandadjustedintherangeof9600-55500baud.
13.2 HSP5SelectsthewirelineHSP5protocol.Thenodeaddresshasnofunctionwiththisprotocol.TheconnectionoccursviaX6AandtransformercableX6A00F50C0-4025whichusestheHSP5interfaceoftheKEBunits.TheconnectiontoaHSP5diagnosticinterfaceofanF5operatorcanalsooccurwithadaptercable00F50C0-0020.Thebaudrateisself-detectedandadjustedintherangeof38400-250000baud.
13.3 Wireless (not at BASIC version)SelectsthewirelessDIN66019IIprotocol.Thenodeaddressselectstherequestedunit.Itmustbeadjustedalsointhetargetdevice.Theconnectionoccursviatheintegratedwire-lessmodule.Additionallyone(orseveral)inverterwirelessmodule0058060-0030mustbeinstalledwithinaradiusofrange.
TheinverterwirelessmodulecanbepluggedtoaDIN66019IIorHSP5interfaceanddetectsprotocolandbaudrateindependently.Alsonetworkingupto30otherunitsispossiblehere.Itisswitchedtoothernodesbychangingthenodeaddress.Thebaudrateisuniversallyadjustedto38400baud.
13.4 USBAvirtualCOMportappearswhenconnectingtheunitviaUSBinterfaceX6BtoaPC.AccesstothefilesystemofthePortableOperatorcanbedonewiththeprogram"kebFtpAppli-cation"afterinstallationoftherequireddriver(ifnecessary).Driverandprogramscanbedownloadedatwww.keb.de.
-
GB - 29
Applications
14. Applications
Loadable,user-specificapplicationscanbeselectedhere.Thisexecutableprogramsarecreatedbytheuserinprogramminglanguage"C"andloadedtothememorycardortotheinternalFlash.TheyarestartedviafunctionkeyF4andthentheyhaveaccesstoallsystemfunctions,likegraphicdisplay,keyboard,communication,real-timeclockandfilesystem.Thefileextensionfortheseapplicationsis„.app“.
Theseparatelyavailableportableoperatortoolkitcontainstheupto64kBcodesizefreedevelopmentenvironmentHEWandexampleprogramstodevelopownapplications.
-
GB - 30
Start-Up
15. Password Protection of the KEB COMBIVERT
TheKEBCOMBIVERTisequippedwithanextensivepasswordprotection.Thisaffectstheportableoperatorasfollows:
Passwordlevel Meaning Portable Operator
CP read Reading isonlypossible in thefinalcustomermenu(CP-Parameter).
No inverter para-metersNo operator para-meters
CP-read/ write
Readingandwritingispossibleinthefinalcu-stomermenu(CP-Parameter)
Applicationmode
All parameter groups and parameters arevisible
Norestriction
Thechangebetweenthepasswordinputs:
Currentpasswordlevel Passwordinputinparameter
CP mode CP.00
Applicationmode Ud.01
-
GB - 31
Error
16. Error
● Error: Passwordsettinginsufficient
Cause: Selectionofparametersatlowpasswordlevel
Solution: AdjustanotherpasswordintheCPmode
● Error: Thefollowingmessageisdisplayedwhenswitchingon:
F1
Configuration320not availableSELECTIONadjuststheunit type manuallyLASTuseslasttype1572ESCaborts
SelectLast
Solution: ● SelectthelastusedparameterconfigurationwiththefunctionLAST
● SelectanewparameterconfigurationwiththefunctionSELECTION
● Loadthecurrentsystemfile"PARAS.BLB"fromtheinternettothememorycardanddownloadittotheoperatorflashmemoryinthemenuitem"filemanagement"
● Error: Theparametersarenotdisplayedintheselectedlanguage
Solution: Loadthecurrentsystemfile„PARAS.BLB“fromtheinternettothememorycardanddownloadittotheoperatorflashmemoryinthemenuitem"filemanagement"→eventuallynotallparametersareavailablehereinthedesiredlanguage
-
KEB Antriebstechnik Austria GmbHRitzstraße8•A-4614Marchtrenk
fon:+43724353586-0•fax:+43724353586-21net:www.keb.at•mail:[email protected]
KEB AntriebstechnikHerenveld2•B-9500Geraadsbergen
fon:+3254437860•fax:+3254437898mail:[email protected]
KEB Power Transmission Technology (Shanghai) Co.,Ltd.No.435QianPuRoad,SongjiangEastIndustrialZone,
CHN-201611Shanghai,P.R.Chinafon:+862137746688•fax:+862137746600
net:www.keb.cn•mail:[email protected]
KEB Antriebstechnik Austria GmbHOrganizačnísložka
K.Weise1675/5•CZ-37004ČeskéBudějovicefon:+420387699111•fax:+420387699119net:www.keb.cz•mail:[email protected]
KEB Antriebstechnik GmbHWildbacherStr.5•D–08289Schneebergfon:+49377267-0•fax:+49377267-281
mail:[email protected]
KEB EspañaC/Mitjer,Nave8-Pol.Ind.LAMASIA
E-08798SantCugatSesgarrigues(Barcelona)fon:+34938970268•fax:+34938992035
mail:[email protected]
Société Française KEBZ.I.delaCroixSt.Nicolas•14,rueGustaveEiffel
F-94510 LA QUEUE EN BRIEfon:+33149620101•fax:+33145767495
net:www.keb.fr•mail:[email protected]
KEB (UK) Ltd.6ChieftainBuisinessPark,MorrisClose
ParkFarm,WellingboroughGB-Northants,NN86XFfon:+441933402220•fax:+441933400724
net:www.keb-uk.co.uk•mail:[email protected]
KEB Italia S.r.l.ViaNewton,2•I-20019SettimoMilanese(Milano)fon:+390233535311•fax:+390233500790
net:www.keb.it•mail:[email protected]
KEB Japan Ltd.15–16,2–Chome,TakanawaMinato-ku
J–Tokyo108-0074fon:+8133445-8515•fax:+8133445-8215
mail:[email protected]
KEB Korea SeoulRoom1709,415Missy2000
725SuSeoDong,GangNamGuROK-135-757Seoul/SouthKorea
fon:+82262536771•fax:+82262536770mail:[email protected]
KEB RUS Ltd.LesnayaStr.House30,Dzerzhinsky(MO)
RUS-140091Moscowregionfon:+74955508367•fax:+74956320217
net:www.keb.ru •mail:[email protected]
KEB SverigeBox265(Bergavägen19)
S-43093Hälsöfon:+4631961520•fax:+4631961124
mail:[email protected]
KEB America, Inc.5100ValleyIndustrialBlvd.South
USA-Shakopee,MN55379fon:+1952224-1400•fax:+1952224-1499
net:www.kebamerica.com•mail:[email protected]
©KEBMat.No. PL58NEB-0000
Rev. 1BDate 10/2016
More and newest addresses at http://www.keb.de
KEB Automation KGSüdstraße 38•D-32683Barntrup
fon:+495263401-0•fax:+495263401-116 net:www.keb.de•mail:[email protected]
KEB worldwide…
http://www.keb.athttp://www.keb.cz/http://www.keb.frmailto:[email protected]://www.keb-uk.co.ukhttp://www.keb.ithttp://www.keb.http://www.kebamerica.commailto:[email protected]://www.keb.de/
1.Introduction1.1General information1.2Validity1.3Qualification1.4Order data1.5Product description2.Hardware2.1Description of the operator2.2Internal flash memory2.3External memory card (not at BASIC version)2.4System files2.5Accumulator operation2.6Wireless operation2.7Real-time clock2.8Technical data3.Software3.1Main menu3.2Operation of the function keys4Inverter Parameter4.1Non-changeable parameters4.2Changeable parameters4.2.1Changing with „Up“ and „Down“4.2.2Set selection4.2.3Numeric input5.CP Mode6.Up/Download7.Work List8.Operator Parameter9Parameter Saving10.File Operations11.Settings11.1Language11.2Startup mode11.3Font size11.4Font size 211.5Contrast11.6Backlight11.7File access11.8Switch off time11.9Date11.10Time11.11Software information11.12Peak memory11.13Start test mode12.Flash Functions13.Communication13.1 DIN66019II13.2HSP513.3Wireless (not at BASIC version)13.4USB14.Applications15.Password Protection of the KEB COMBIVERT16.Error