Download - CMS Miscellaneous Products v2
1
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
2
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
RETRACTABLE SUPPLY POST
Flexibility at its best:
Flush retracted home position or extended for the
temporary connection of supply services such as:
electricity, compressed air, and industrial water.
For Outdoor use:
These universal sources of supply are readily
extendible when the need arises. Being freely passable
in the retracted home position, they are unrivaled in
security and safety.
The design and make of the surface on top of the supply
post can be adapted to that of the surrounding area, thus
providing a uniform harmonious aspect.
The retractable supply posts, which can be fitted into any
architectural surroundings, have proven their value on
many occasions.
Retractable supply posts for public places are in fact an
ideal solution for all kinds of events or installations, such
as: market-days, festivals, concerts news stands and the
like.
Retractable supply posts for sports halls and multipurpose ven-
ues.
Changing events requires maximum flexibility. Therefore
this connecting system has been designed to adapt to
any event, sports events of all kinds, concerts, and
festivals.
3
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
Retractable Supply Posts Special Designs
For example in aircraft maintenance hangars where the
connecting units for the various supply lines are
expected to be at hand whenever the need arises, but at
the same time, the maneuvering areas must remain free
of obstacles, hence readily and freely passable.
The range of Retractable Supply Posts
The column can be extended, and retracted, using a
crank handle acting on a vertical screw passed through
the cover plate.
- Connecting unit for the supply of electricity,
compressed air, and industrial air, water, gas and
dust.
- The top coverings are passable under the
provisions of DIN 1072 C 250
- A concrete pit serving as a foundation. The pit is
split into a chamber holding the cable terminal box
and a discharge for drainage
- A pit insert serving as a journal bearing for the
column; it also holds the cover bearing strip (with
gasket), the frame work for the paving, as well as a
surface water discharging open groove
- A column that can be equipped on two sides.
With its cover, it represents the extendable
connecting unit proper
- Two types of cover plates are available
- One for outdoor installation, made of aluminum
casting, receives paving (depth: 50 mm)
- Another for indoor installation, made of steel
(thickness: 20 mm)
- The column can be extended, and retracted, using
a crank handle acting on a vertical screw passed
through the cover plate
Detailed technical information is contained in our technical data
sheet. Please phone for further information.
4
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
RACK RAIL POWER UNIT
SOME OF THE FEATURES INCLUDE:
- Compact and convenient solution for providing power to
your server rack/cabinet where it is easily accessible
- Supplied with ‘Neon Thermal Overload’ switch
- Customized to any length and specification you require,
with a short turn around
- Available with 10amp , 15amp or round earth outlets
- Available in vertical or horizontal
- Adjustable fixing kit for vertical rails
- PDU available in Black or White
- Circuit breaker protection available
CMS Electracom are proud to introduce our
new cost effective range of Rack rail power
units.
These 1 Rack units are the perfect power
solution for your server rack/cabinet to provide
maximum protection within your IT
environment. Each rail comes with an
integrated neon thermal overload switch to
prevent your power supply from overloading.
Units are available in horizontal and vertical
(refer to images) and can be custom made for
specific applications.
ORDERING INFORMATION
PART NO. DESCRIPTION
Q06AAE** 6 x 10amp outlets c/w 3mtr lead and 10amp plug
Q06ABE** 6 x 10amp Outlets c/w 3mtr lead and 15amp plug
Q12AAE** 12 x 10amp Outlets c/w 3mtr lead and 10amp plug
Q12ABE** 12 x 10amp Outlets c/w 3mtr lead and 15amp plug
For alternate configurations/specification contact your CMS representative.
Notes:
- **Denotes White (WT) or Black (BK)
- For vertical mount rack rails, add ‘V’ to the end of part number
- Refer to the catalogue for more information and alternative configurations
9.9.14
5
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
10A, 10A Plug /
Thermal, 3 m
10A, 15A Plug /
Thermal, 3 m
10A, 20A
Plug, 3 m
10A Round Earth, 10A
Plug / Thermal, 3 m
10A Round Earth, 15A
Plug / Thermal, 3 m
15A, 15A Plug / Ther-
mal, 3 m
10A Round Earth,
20A Plug, 3 m
15A, 20A Plug, 3 m
Q06AAEV
Q06ABEV
Q06ACEV
Q06CAEV
Q06CBEV
Q06EBEV
Q06CCEV
Q06ECEV
Q12AAEV
Q12ABEV
Q12ACEV
Q12CAEV
Q12CBEV
Q12EBEV
Q12CCEV
Q12ECEV
Q06AAE
Q06ABE
Q06ACE
Q06CAE
Q06CBE
Q06EBE
Q06CCE
Q06ECE
Q09AAE
Q09ABE
Q09ACE
Q09CAE
Q09CBE
Q09EBE
Q09CCE
Q09ECE
Q12AAE
Q12ABE
Q12ACE
Q12CAE
Q12CBE
Q12EBE
Q12CCE
Q12ECE
Q15AAE
Q15ABE
Q15ACE
Q15CAE
Q15CBE
Q15EBE
Q15CCE
Q15ECE
Q18AAE
Q18ABE
Q18ACE
Q18CAE
Q18CBE
Q18EBE
Q18CCE
Q18ECE
Q21AAE
Q21ABE
Q21ACE
Q21CAE
Q21CBE
Q21EBE
Q21CCE
Q21ECE
Q24AAE
Q24ABE
Q24ACE
Q24CAE
Q24CBE
Q24EBE
Q24CCE
Q24ECE
Q27AAE
Q27ABE
Q27ACE
Q27CAE
Q27CBE
Q27EBE
Q27CCE
Q27ECE
Q30AAE
Q30ABE
Q30ACE
Q30CAE
Q30CBE
Q30EBE
Q30CCE
Q30ECE
Rack Rail Pricing
6
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
Q = Equipment
Rack Power
Strip
00= no. of
Sockets
A= Style of socket A= plug Size &
Type
A = Length
of supply
lead
WT=
Colour
V=Vertical
H=Horizontal
no alpha
required for
Horizontal
1 RU Vertical Rack
Rail, 6 x 10amp
sockets, 3m 10amp
Plug, White
Q 0.6 A A D WT V
1 RU Horizontal
Rack Rail, 48 x
10amp Round
earth sockets, 3m
20amp Plug, Black
Q 48 C G E BK
A: 10amp Auto
Switch
A: 10amp Plug A: 1.0m
B: 10amp Non
Switch
B: 15amp Plug B: 1.5m
C: 10amp Round
earth auto switch
C: 20amp Plug C: 2.0m
D: 10amp Round
Earth Non Switch
E: 10amp Plug
C/W locking ring
D: 2.5m
E: 15amp Auto
Switch
F: 15amp Plug C/
W locking ring
E: 3.0m
F: 15amp Non
Switch
G: 20amp Plug
C/W locking ring
F: 3.5m
G: 10amp Auto
switch, 100mm
between sockets
H:10amp 3 pin
Industrial Plug
G: 4.0m
H: 10amp Non
Switch, 100mm
between sockets
I: 15amp 3 pin
Industrial Plug
H: 4.5m
I: 10amp Round
earth auto switch,
100mm between
sockets
J: 10amp 4 pin
Industrial Plug
I: 5.0m
J: 10amp Round
earth non switch,
100mm between
sockets
K: 20amp 4 pin
Industrial Plug
J: 6.0m
K: 15amp auto
switch, 100mm
between sockets
L: 32amp 4 pin
Industrial Plug
K: 7.0m
RACK RAIL PDU - PART NUMBER CONIFIGURATION
F: 15amp non
switch, 100 mm
between sockets
M: 10amp 5 pin
Industrial Plug
L: 8.0m
IEC M: 20amp 5 pin
Industrial Plug
N: 32amp 5 pin
Industrial Plug
7
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
ORDERING INFORMATION
PART NO. DESCRIPTION
WB001 CMS Acoustic rated Rw59 in wall bracket c/w 4 x GPOs, 4 x provision for data and 20amp rewireable
connector
The In-Wall bracket simplifies the process of mounting
LED, LCD or Plasma displays with their associated
media equipment in commercial fit outs.
The In-Wall bracket recesses into the wall, providing
storage for media peripherals and allowing the display
to be mounted flat against the wall.
To achieve an exceptional fit and finish while achieving
significant installation and cost efficiencies, specify the
CMS In-Wall bracket.
Specifications include:
- Integrated soft wired power rail with four power
outlets
- Acoustic rated - Rw59
- Integrated data and AV cable rail with four
data outlets
- Adjustable internal mounting brackets to
accommodate a range of media equipment
- Powder coated gloss black. Colour can be
specified for large orders
- Accommodates up to 80inch LED, LCD or Plasma
displays
- Designed to fit in-between studs that are spaced
600mm apart
- Load rated to 60kg when installed correctly
- Dimensions: (h) 497mm x (w) 800mm x (d) 83mm
a
8
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
9
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
10
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
11
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
Mark the centre point for all screens on plan. For each screen, note that studs should be placed 300mm from each side of the centre point.