CitectSCADA 2015 Service Pack 1 1
CitectSCADA 2015
Release Notes for Service Pack 1
The CitectSCADA 2015 Service Pack 1 includes several product updates and
enhancements, providing improvements in stability, performance and
functionality.
Important:
As per recommended practice, all projects should be backed up prior to
commencing the Service Pack installation.
Upgrade and recompile all projects after installing this Service Pack, otherwise a
‘conflicting database size’ message will display at runtime.
By default, the Project Editor will prompt you to perform the upgrade after the
configuration tools are launched. However, if you cancel the upgrade, you can
select another upgrade to occur at startup by editing the Citect.ini file, setting the
[CTEDIT]Upgrade = 1, and restarting the Project Explorer.
In some instances a full compile may be required after an upgrade. If using
incremental compile (which is the default) re-run a compile, and select to
continue when prompted to perform a full compile.
For projects using Library_Equipment templates, run Update Pages (in Graphics Builder→Tools→Update Pages).
Hot Fixes
Customers who have hot fixes installed should check the release notes to ensure
the applicable fix is included in this Service Pack - please contact SCADA & MES
Global Support if in any doubt.
SCADA & MES Global Support recommends CitectSCADA 2015 users apply the
Service Pack as soon as practically possible.
Note For general information about service packs, see Knowledge Base article
Q2181.
This service pack applies to two of the products shipped with CitectSCADA 2015:
a) CitectSCADA
b) CitectSCADA Web Server
Separate service pack installers have been created for these components,
allowing you to choose which components to upgrade to Service Pack 1.
CitectSCADA 2015 Service Pack 1 2
Table of Contents
Release Notes for Service Pack 1 ................................................................... 1
What’s New in CitectSCADA 2015 SP1 ......................................................... 3
Service Pack Installation............................................................................ 5
Service Pack Uninstall ............................................................................... 9
Files changed in this Service Pack ............................................................. 12
Known Issues ........................................................................................ 26
Issues resolved in this Service Pack .......................................................... 29
CitectSCADA 2015 Service Pack 1 3
What’s New in CitectSCADA 2015 SP1
CitectSCADA 2015 SP1 incorporates the following new or modified features.
Scheduler integration for Bacnet
The time scheduler now has inbuilt support for Bacnet schedules. Weekly and
exceptions schedules from Bacnet compatible devices can now be displayed,
created and edited within the scheduler ActiveX control.
Tag Import improvements for Bacnet
Variable tags for Bacnet schedules can now be imported directly from Bacnet
compatible devices into CitectSCADA using the Tag Import feature.
Equipment can automatically be created Bacnet schedules and Bacnet calendar
objects which allows integration into the time scheduler.
Generate Project Summary
The project summary is an xml based file that contains information about the
current project and user-created include projects. The project summary contains
statistics on:
Variable Tags
Alarms
Trends
I/O Devices
Internal Cicode functions used
A project summary can be generated by selecting “Generate Project Summary”
from the tools menu in project editor.
All information in the project summary is anonymous.
Scheduler ActiveX Control properties
New properties have been added to the Scheduler ActiveX control to allow you to
control:
The selected cluster
The selected equipment
The selected tab
The selected special day category
To remove the configuration view.
Cicode Profiler
The performance of user created Cicode functions can now be measured using the
Cicode Profiler. This feature will create a report showing the amount of time each
Cicode function has taken to execute. This is useful for debugging large projects
with complex Cicode.
For more information on the Cicode Profiler, please refer to the help topic “The
Cicode Profiler”.
CitectSCADA 2015 Service Pack 1 4
Exclusive Redundancy
I/O Devices now support exclusive redundancy. This can be enabled by setting
the “Exclusive” setting to “true” for an I/O Device and all of its redundant devices.
When Exclusive redundancy is enabled, only one redundant device will send
requests to the field device at any one time. All I/O Devices will still create a
channel to the field device.
New Cicode functions
Three new Cicode functions have introduced in CitectSCADA 2015 Service pack 1.
PageExists – Determines if a page exists or not
TagWriteArrayInt – Writes an array of integer values to a tag
TagWriteArrayReal – Writes an array of real values to a tag
For more information on these functions, please refer to the help.
Windows 10 Support
CitectSCADA 2015 Service Pack 1 can now be installed on Windows 10.
CitectSCADA 2015 Service Pack 1 5
Service Pack Installation
Select the relevant install procedure below:
Existing CitectSCADA 2015 Users
1. Run patch file “CitectSCADA 2015 SP 1.exe” to extract installation
package.
Figure 1: CitectSCADA 2015 Service Pack 1 Installation
2. Click ‘Next’ and follow on-screen instructions to install “CitectSCADA 2015
Service Pack 1”.
Figure 2: Service Pack Installation Complete
CitectSCADA 2015 Service Pack 1 6
3. In step shown in Figure 3, make sure that CitectSCADA 2015 Service Pack
1 Checkbox is ticked. Please note Web Server upgrade will be explained
later in this section.
Figure 3: CitectSCADA 2015 Service Pack 1 Installation
4. In step shown in Figure 4, select the documentation to update. Please note
that the help shipped with CitectSCADA 2015 Service Pack 1 has not been
localized. To keep your existing localized help, uncheck the option
“CitectSCADA 2015 PC-based Help”.
Figure 4: CitectSCADA 2015 Service Pack 1 Documentation Update
CitectSCADA 2015 Service Pack 1 7
5. Wait for the installation wizard to install “CitectSCADA 2015 Service Pack
1”. When dialog in Figure 5 is prompted click ‘Finish’ button to exit the
installer.
Figure 5: Installation Complete
6. Open Citect Explorer, wait until the upgrade has completed.
7. For any project using Library_Equipment templates:
a. Select the project in Citect Explorer.
b. In Citect Graphics Builder, select Tools→Update Pages, then click
Yes to continue.
8. Perform a full compile. When using Incremental Compile (which is the
default), re-run the compile and select to continue when prompted.
9. For any webclient projects whose graphics pages were updated in step 5,
redeploy:
a. Run Citect Explorer→Tools→Web Deployment Preparation.
b. Follow the steps below for “Upgrading CitectSCADA 2015 Web
Server to Service Pack 1” and re-save the project deployment.
New CitectSCADA 2015 Users
1. Install CitectSCADA 2015.
2. Open Citect Explorer for the first time and then close.
3. Run patch file “CitectSCADA 2015 SP 1.exe”.
4. Open Citect Explorer and wait until the upgrade is complete.
5. For any project using Library_Equipment templates:
a. Select the project in Citect Explorer.
b. In Citect Graphics Builder, select Tools→Update Pages, then click
Yes to continue.
CitectSCADA 2015 Service Pack 1 8
6. Ensure the Incremental Compile menu option (in Project Editor→Tools→Options) is turned OFF before recompiling each project.
Upgrading CitectSCADA 2015 Web Server to Service Pack 1
To upgrade CitectSCADA 2015 Web Server:
1. On your web server(s) (machines running IIS), run patch file
“CitectSCADA 2015 SP 1.exe”. When dialog in Figure 6 is prompted, make
sure that CitectSCADA Web Server Service Pack 1 is ticked. This will install
an updated CAB file: “CitectSCADAWebClient_7_50_1_xxx.cab” which will
become available to all your web clients.
Figure 6: CitectSCADA Web Server Service Pack 1 Installation
2. On all your web client machines, take the following actions:
a. Open Programs and Features by choosing Start→Settings→Control
Panel→Programs→Programs and Features.
b. Locate the entry ‘CitectSCADA 2015 Web Client’ and click ‘Remove’.
If this item is not listed in Program and Features, you should delete
the %windir%\system32\citect\webclient\750 directory. (NB:
%windir% indicates the default windows installation directory.)
c. In the CitectSCADA Web Deployment Configuration (in Internet
Explorer):
i. Select ‘CitectSCADAWebClient_7_50_1_xxx.cab’ from the
Client Control drop down menu.
ii. Save the deployment by selecting the action to save
deployment.
CitectSCADA 2015 Service Pack 1 9
Service Pack Uninstall
The procedure for removing (rolling back) Service Pack 1 varies according to the
Operating System you are running.
Supported Windows Versions
Before following one of the procedures below, backup your citect.ini file to a
temporary location. Use the Computer Setup Editor (via Tools menu) to
determine the location of this file. This step is required as the uninstall procedure
may revert some settings back to their default. Additionally, unless you are
restoring your projects to the backups made prior to Service Pack upgrade, you
will need to backup the citect.frm file from the Bin directory. Restore the citect.ini
file (and possibly citect.frm) to their original location upon completion of the
uninstall procedure.
During the uninstallation process the user will be prompted to specify the
CitectSCADA 2015 installer location if it is no longer accessible. The following
message is shown if CitectSCADA 2015 has been installed from a DVD:
"The feature you are trying to use is on a CD-ROM or other removable disk that is
not available".
Hence when uninstalling Service Pack 1 the user will have to specify the
CitectSCADA 2015 installer location. Locate the MSI installer for the CitectSCADA
2015 product via the Browse button and then click OK. The SCADA installer is
located in the "Citect" folder under the main installation directory (e.g. your DVD
drive).
To uninstall products other than the Web Server:
1. Open “Programs and Features” from the Control Panel:
Figure 7: Programs and Features
2. Select “View installed updates” from the side panel that is presented:
CitectSCADA 2015 Service Pack 1 10
Figure 8: View installed updates
3. Select “Service Pack 1” for the appropriate product then click Uninstall:
Figure 9: Uninstall an update
Note If you have User Access Control switched on, the UAC dialog will be
displayed before the uninstaller is launched. Select allow and proceed
with the uninstallation. This is a limitation imposed by the User Access
Control and cannot be avoided.
4. On a 64-bit operating system, select “Service Pack 1 (x64)” for the
appropriate product then click Uninstall:
5. Open Citect Explorer, wait until upgrade has completed.
6. For any project using Library_Equipment templates:
a. Select the project in Citect Explorer.
b. In Citect Graphics Builder, select Tools→Update Pages, then click
Yes to continue.
7. The Incremental Compile option (in Project Editor→Tools→Options) should
be turned OFF before recompiling each project.
CitectSCADA 2015 Service Pack 1 11
Uninstallation of Web Server and Web Client(s)
The CitectSCADA servers and web client(s) need to be running the same service
pack. This means that to uninstall CitectSCADA 2015 Service Pack 1, it is also
necessary to modify the deployments on the web server, and uninstall any web
clients that connect to the downgraded servers. This will allow the web server to
install the correct web client version when next used.
Note CitectSCADA 2015 Service Pack 1 web client cabinet
(CitectSCADAWebClient_7_50_1_xxx.cab) will update the Microsoft Rich
Text control (RichTx32.ocx) on your web client machines. As per Microsoft
best practices, this control will not be downgraded to the original version
after uninstalling the web client.
CitectSCADA 2015 Service Pack 1 12
Files changed in this Service Pack
Listed below are the files updated or added to the CitectSCADA product after
installing CitectSCADA 2015 Service Pack 1.
Added Files - CitectSCADA
Add Install Path and File – CitectSCADA
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\SecurityCredentials.dll
Updated Files - CitectSCADA
Update Install Path and File – CitectSCADA Notes
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\DBObjCitect.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\ERRSTR.DBF
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\FUNC0.DBF
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\SEQUIP.DBF
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\SUNITS.DBF
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\ERRSTR.NDX
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\CSV_Include\equip.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\CSV_Include\units.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\chinese.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\ENGLISH.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\equip.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\french.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\german.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\italian.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\japanese.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\korean.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\portuguese.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\russian.dbf
CitectSCADA 2015 Service Pack 1 13
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\spanish.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\UNITS.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\citect.ci
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\CTUTIL.CI
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\chinese.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\equip.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\french.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\german.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\italian.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\japanese.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\korean.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\portuguese.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\russian.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\spanish.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\units.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\_Internal_AlmTable.ci
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\_Internal_Library.ci
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\_Internal_Scrollbar.ci
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\_Internal_Table.ci
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\_Internal_Tree.ci
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Controls\lib_controls.ctm
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Library_Equipment\equip.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
CitectSCADA 2015 Service Pack 1 14
7.50\User\Library_Equipment\units.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\SxW_Style_Include\chinese.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\SxW_Style_Include\equip.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\SxW_Style_Include\french.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\SxW_Style_Include\german.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\SxW_Style_Include\italian.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\SxW_Style_Include\japanese.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\SxW_Style_Include\korean.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\SxW_Style_Include\portuguese.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\SxW_Style_Include\russian.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\SxW_Style_Include\spanish.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\SxW_Style_Include\units.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\SxW_Style_Include\variable.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\System\equip.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\System\UNITS.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\System\VARIABLE.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\chinese.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\equip.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\french.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\german.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\italian.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\japanese.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\korean.dbf
CitectSCADA 2015 Service Pack 1 15
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\portuguese.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\russian.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\spanish.dbf
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\units.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\variable.DBF
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\TabAlarm_Utility.ci
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\TabAlarmEqTree.ci
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\TabAlmTable.ci
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Tab_Style_Include\TabBrowseTable.ci
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\AlarmServer.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.SCADA.Alarm.LegacyUtility.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.Alarm.Client.Adaptor.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.Alarm.Server.Adaptor.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtRegion.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Ctg32.dll
_CommonFilesFolder_\Citect\CtUtilManagedHelper.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CtUtilManagedHelper.dll
Common\Citect\Scheduler 7.40\CtUtilManagedHelper.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Dlg32.dll
_CommonFilesFolder_\Citect\CtUtil32.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtUtil32.dll
Common\Citect\Scheduler 7.40\CtUtil32.dll
_CommonFilesFolder_\Citect\CtApi.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtApi.dll
Common\Citect\Scheduler 7.40\CtApi.dll
_CommonFilesFolder_\Citect\Ct_ipc.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Ct_ipc.dll
Common\Citect\Scheduler 7.40\Ct_ipc.dll
CitectSCADA 2015 Service Pack 1 16
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\Citect.CitectSCADA.Kernel.KernelTaskQueue.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtKC.dll
_CommonFilesFolder_\Citect\CtKC.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtMenu32.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\RuntimeConfiguration.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\RuntimeConfigurationDatabaseAccess.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\Citect.CitectSCADA.RuntimeConfiguration.dll
_CommonFilesFolder_\Citect\CiASCDrv.dll
_CommonFilesFolder_\Citect\CiDBFDrv.dll
_CommonFilesFolder_\Citect\Cimitsubishidrv.dll
_CommonFilesFolder_\Citect\CiOPCDrv.dll English
_CommonFilesFolder_\Citect\CiOPCDrv.dll German
_CommonFilesFolder_\Citect\CiOPCDrv.dll Spanish
_CommonFilesFolder_\Citect\CiOPCDrv.dll French
_CommonFilesFolder_\Citect\CiOPCDrv.dll Italian
_CommonFilesFolder_\Citect\CiOPCDrv.dll Japanese
_CommonFilesFolder_\Citect\CiOPCDrv.dll Korean
_CommonFilesFolder_\Citect\CiOPCDrv.dll Portuguese
_CommonFilesFolder_\Citect\CiOPCDrv.dll Russian
_CommonFilesFolder_\Citect\CiOPCDrv.dll Chinese
_CommonFilesFolder_\Citect\CiSchneiderDrv.dll English
_CommonFilesFolder_\Citect\CiSchneiderDrv.dll German
_CommonFilesFolder_\Citect\CiSchneiderDrv.dll Spanish
_CommonFilesFolder_\Citect\CiSchneiderDrv.dll French
_CommonFilesFolder_\Citect\CiSchneiderDrv.dll Italian
_CommonFilesFolder_\Citect\CiSchneiderDrv.dll Japanese
_CommonFilesFolder_\Citect\CiSchneiderDrv.dll Korean
_CommonFilesFolder_\Citect\CiSchneiderDrv.dll Portuguese
_CommonFilesFolder_\Citect\CiSchneiderDrv.dll Russian
_CommonFilesFolder_\Citect\CiSchneiderDrv.dll Chinese
_CommonFilesFolder_\Citect\CiTrans.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CTTAGDB.dll
_CommonFilesFolder_\Citect\CiTagBrowse.dll
_CommonFilesFolder_\Citect\CiMitsubishiTagBrowse.dll
CitectSCADA 2015 Service Pack 1 17
_CommonFilesFolder_\Citect\CiOPCTagBrowse.dll English
_CommonFilesFolder_\Citect\CiOPCTagBrowse.dll German
_CommonFilesFolder_\Citect\CiOPCTagBrowse.dll Spanish
_CommonFilesFolder_\Citect\CiOPCTagBrowse.dll French
_CommonFilesFolder_\Citect\CiOPCTagBrowse.dll Italian
_CommonFilesFolder_\Citect\CiOPCTagBrowse.dll Japanese
_CommonFilesFolder_\Citect\CiOPCTagBrowse.dll Korean
_CommonFilesFolder_\Citect\CiOPCTagBrowse.dll Portuguese
_CommonFilesFolder_\Citect\CiOPCTagBrowse.dll Russian
_CommonFilesFolder_\Citect\CiOPCTagBrowse.dll Chinese
_CommonFilesFolder_\Citect\CiSchneiderTagBrowse.dll English
_CommonFilesFolder_\Citect\CiSchneiderTagBrowse.dll German
_CommonFilesFolder_\Citect\CiSchneiderTagBrowse.dll Spanish
_CommonFilesFolder_\Citect\CiSchneiderTagBrowse.dll French
_CommonFilesFolder_\Citect\CiSchneiderTagBrowse.dll Italian
_CommonFilesFolder_\Citect\CiSchneiderTagBrowse.dll Japanese
_CommonFilesFolder_\Citect\CiSchneiderTagBrowse.dll Korean
_CommonFilesFolder_\Citect\CiSchneiderTagBrowse.dll Portuguese
_CommonFilesFolder_\Citect\CiSchneiderTagBrowse.dll Russian
_CommonFilesFolder_\Citect\CiSchneiderTagBrowse.dll Chinese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\EquipGen.exe English
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\EquipGen.exe German
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\EquipGen.exe Spanish
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\EquipGen.exe French
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\EquipGen.exe Italian
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\EquipGen.exe Japanese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\EquipGen.exe Korean
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\EquipGen.exe Portuguese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\EquipGen.exe Russian
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\EquipGen.exe Chinese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\TagGen.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Tools32.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtBack32.exe
_CommonFilesFolder_\Citect\CiDebugHelp.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CiDebugHelp.dll
Common\Citect\Scheduler 7.40\CiDebugHelp.dll
CitectSCADA 2015 Service Pack 1 18
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CiExceptionMailer.dll
English
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CiExceptionMailer.dll
German
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CiExceptionMailer.dll
Spanish
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CiExceptionMailer.dll
French
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CiExceptionMailer.dll
Italian
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CiExceptionMailer.dll
Japanese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CiExceptionMailer.dll
Korean
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CiExceptionMailer.dll
Portuguese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CiExceptionMailer.dll
Russian
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CiExceptionMailer.dll
Chinese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Citect32.exe
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Client.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtCmp32.exe
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CSAPSI.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtCicode.exe
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Ctcomdlg.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtEdit32.exe
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtDraw32.exe
_CommonFilesFolder_\Citect\CtEng32.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtEng32.dll
Common\Citect\Scheduler 7.40\CtEng32.dll
_CommonFilesFolder_\Citect\CtRes32.DLL English
_CommonFilesFolder_\Citect\CtRes32.dll German
_CommonFilesFolder_\Citect\CtRes32.dll Spanish
_CommonFilesFolder_\Citect\CtRes32.dll French
_CommonFilesFolder_\Citect\CtRes32.dll Italian
_CommonFilesFolder_\Citect\CtRes32.dll Japanese
_CommonFilesFolder_\Citect\CtRes32.dll Korean
_CommonFilesFolder_\Citect\CtRes32.dll Portuguese
_CommonFilesFolder_\Citect\CtRes32.dll Russian
CitectSCADA 2015 Service Pack 1 19
_CommonFilesFolder_\Citect\CtRes32.dll Chinese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtRes32.DLL English
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtRes32.dll German
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtRes32.dll Spanish
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtRes32.dll French
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtRes32.dll Italian
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtRes32.dll Japanese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtRes32.dll Korean
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtRes32.dll Portuguese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtRes32.dll Russian
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtRes32.dll Chinese
Common\Citect\Scheduler 7.40\CtRes32.DLL
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtIndex.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtProj.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtRender.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtSetup.exe
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtUtil.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtVersion.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\DriverDebug.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\DriverDebugWrapper.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\DriverRuntimeInterface.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\Citect.CitectSCADA.DSServers.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\EWSClient.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\EWSClientWrapper.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.SCADA.EWS.ServiceHost.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\ExprWiz.exe
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Techdo32.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\IoServer.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Diskdrv.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\ManagedUtil.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.SCADA.OPC.DaServer.Host.exe
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtExplor.exe
CitectSCADA 2015 Service Pack 1 20
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\PlatformHost.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\PolledDataSource.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\DBFAccess.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ReportServer.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Rscite32.exe
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SchneiderIdentity.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CiUSAFE.exe English
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CiUSAFE.exe German
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CiUSAFE.exe Spanish
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CiUSAFE.exe French
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CiUSAFE.exe Italian
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CiUSAFE.exe Japanese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CiUSAFE.exe Korean
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CiUSAFE.exe Portuguese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CiUSAFE.exe Russian
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CiUSAFE.exe Chinese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ComputerSetupEditor.exe
English
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ComputerSetupEditor.exe
German
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ComputerSetupEditor.exe
Spanish
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ComputerSetupEditor.exe
French
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ComputerSetupEditor.exe
Italian
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ComputerSetupEditor.exe
Japanese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ComputerSetupEditor.exe
Korean
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ComputerSetupEditor.exe
Portuguese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ComputerSetupEditor.exe
Russian
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ComputerSetupEditor.exe
Chinese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\TrendServer.dll
_CommonFilesFolder_\Citect\CiTrendArchiveFileOffset.dll
CitectSCADA 2015 Service Pack 1 21
_CommonFilesFolder_\Citect\CiTrendArchiveFileOffset8Byte.dll
_CommonFilesFolder_\Citect\CiTrendArchiveInterpolator.dll
_CommonFilesFolder_\Citect\CiTrendManager.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\ReIndex.exe
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.Alarm.Client.Connection.Manager.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.Alarm.Client.Model.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.Alarm.Client.Model.Interfaces.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.Alarm.Common.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.Alarm.Server.Connection.Manager.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.Alarm.Server.Model.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.Alarm.Server.Model.Interfaces.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\Citect.CitectSCADA.TagGen.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.Scada.EquipmentEditor.Model.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.Scada.EquipmentEditor.exe
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.SCADA.OPC.DaServer.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\RuntimeManager.exe
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\SE.SCADA.RuntimeManager.BackEnd.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\CiExceptionmailer.exe
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ManagedDep.dll
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\Data\Example.ctz
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\CtVersion.xml
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\ParameterLUT.xml
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\citect.frm Chinese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\citect.frm English
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\citect.frm German
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\citect.frm Spanish
CitectSCADA 2015 Service Pack 1 22
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\citect.frm French
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\citect.frm Italian
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\citect.frm Japanese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\citect.frm Korean
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\citect.frm Portuguese
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\citect.frm Russian
Common\Citect\Scheduler 7.40\TimeSchedulerActiveXContainer.dll
Common\Citect\Scheduler 7.40\Win32Ctrl.dll
Common\Citect\Scheduler 7.40\SE.TimeSchedulerControls.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\Citect.Platform.Data.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\Citect.Platform.PSI.Client.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\Citect.Platform.PSI.Interfaces.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\Citect.Platform.PSI.Server.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\Citect.Platform.Scheduling.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\Citect.Platform.Tasks.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\Citect.Platform.Transport.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\Citect.Platform.XmlUtils.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA
7.50\Bin\LMBrickProvider.dll
_CommonFilesFolder_\Citect\Analyst.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\ENABLE40.DLL
_CommonAppDataFolder_\Schneider Electric\CitectSCADA
7.50\User\Include\AlarmFilter.chm
Common\Citect\Scheduler 7.40\SE.TimeSchedulerControls.resources.de.dll
Common\Citect\Scheduler 7.40\SE.TimeSchedulerControls.resources.es.dll
Common\Citect\Scheduler 7.40\SE.TimeSchedulerControls.resources.fr.dll
Common\Citect\Scheduler 7.40\SE.TimeSchedulerControls.resources.it.dll
Common\Citect\Scheduler 7.40\SE.TimeSchedulerControls.resources.ja.dll
Common\Citect\Scheduler 7.40\SE.TimeSchedulerControls.resources.ko.dll
Common\Citect\Scheduler 7.40\SE.TimeSchedulerControls.resources.pt.dll
Common\Citect\Scheduler 7.40\SE.TimeSchedulerControls.resources.ru.dll
Common\Citect\Scheduler 7.40\SE.TimeSchedulerControls.resources.zh-
CHS.dll
CitectSCADA 2015 Service Pack 1 23
Common\Citect\Scheduler 7.40\SE.TimeSchedulerControls.resources.no.dll
Common\Citect\Scheduler 7.40\SE.TimeSchedulerControls.resources.sv.dll
Common\Citect\Scheduler 7.40\SchedOp.chm
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\DBObjCitect.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\AlarmServer.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\SE.SCADA.Alarm.LegacyUtility.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\SE.Alarm.Client.Adaptor.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\SE.Alarm.Server.Adaptor.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CtRegion.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Ctg32.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CtUtilManagedHelper.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Dlg32.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CtUtil32.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Ct_ipc.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Citect.CitectSCADA.Kernel.KernelTaskQueue.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CtKC.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\RuntimeConfiguration.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\RuntimeConfigurationDataBaseAccess.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Citect.CitectSCADA.RuntimeConfiguration.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CiDebugHelp.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CiExceptionMailer.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Client.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CSAPSI.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
CitectSCADA 2015 Service Pack 1 24
(x64)\Ctcomdlg.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CtEng32.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CtRes32.DLL
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CtRender.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CtUtil.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CtVersion.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Citect.CitectSCADA.DSServers.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Techdo32.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\ManagedUtil.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\PlatformHost.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\PolledDataSource.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\SchneiderIdentity.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\SE.Alarm.Client.Connection.Manager.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\SE.Alarm.Client.Model.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\SE.Alarm.Client.Model.Interfaces.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\SE.Alarm.Common.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\SE.Alarm.Server.Connection.Manager.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\SE.Alarm.Server.Model.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\SE.Alarm.Server.Model.Interfaces.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\CtVersion.xml
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Citect.Platform.Data.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Citect.Platform.PSI.Client.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Citect.Platform.PSI.Interfaces.dll
CitectSCADA 2015 Service Pack 1 25
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Citect.Platform.PSI.Server.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Citect.Platform.Scheduling.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Citect.Platform.Tasks.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Citect.Platform.Transport.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Citect.Platform.XmlUtils.dll
_ProgramFilesFolder_\Schneider Electric\CitectSCADA 7.50\Bin\Bin
(x64)\Citect.exe
Added Files - CitectSCADA Web Server
Listed below are the files added to the CitectSCADA WebServer product after
installing CitectSCADA 2015 Service Pack1.
Add Install Path and File – CitectSCADA WebServer
Citect\client\750\CitectSCADAWebClient_7_50_1_180.cab
Updated Files - CitectSCADA Web Server
None.
CitectSCADA 2015 Service Pack 1 26
Known Issues
This Service Pack also contains the known issues described below.
Data Browse field not found error
CitectSCADA 2015 Service pack 1 Display clients may display Error code 413,
“Data Browse Field Not Found” when communicating to CitectSCADA 2015
servers.
New help is not localized
The help that is shipped with CitectSCADA 2015 Service Pack 1 has not been
localized.
Chinese installer
CitectSCADA 2015 Service Pack 1 27
Korean installer
In case of Chinese and Korean when “CitectSCADA 2015 PC-based Help” is
selected the installer provides sub-options to allow users to make a selection, like
the following:
- Simplified Chinese / Korean (Existing localized documents will not change and
only existing English documents will be updated)
- English (Existing localized documents will be replaced with the updated English
documents as well)
This option is defaulted to 'English' to provide updated help. If you want to keep
the original translated help files rather than getting updates in English, please
select the first option (Simplified Chinese or Korean). Or, you may re-install help
files later by starting the service pack installer again whenever you want to
change the language of PC-based help files.
Scheduler Common Files Path
Scheduler folder in Common Files: It had to be "Scheduler 7.50" but unfortunately CitectSCADA 2015 already installed files under "Scheduler 7.40". The Time Scheduler operator manual (SchedOp.chm) in the Common Files\....\Scheduler 7.40 is not localised whist the counterpart in [BIN] folder is localised.
Scheduler Help documentation at runtime
When you click on the "?" button of scheduler control, English help will be displayed.
BACnet exception schedules linked to calendar object may be
duplicated in Time Scheduler
For BACnet exception schedules that are linked to calendar object, there is a small chance that they will be shown as duplicated entries in Time Scheduler. The problem may be
CitectSCADA 2015 Service Pack 1 28
resolved if the report server is restarted or when the affected schedules are modified in the device
CitectSCADA 2015 Service Pack 1 29
Issues resolved in this Service Pack
This Service Pack resolves the issues described below. If you have any hotfixes
installed on your current version, please check if they are included in this service
pack. If the hotfix is not included in the list below, or you have any concerns
regarding the issues covered, please contact Support before installing this Service Pack.
Bug Fixes
Licensing
63810 - A client running with /x flag consumes all available Flexera
licenses
A client running with /x flag consumed all available local FLEXERA licenses
bypassing the floating license mechanism. This behavior has now been changed.
A client running with /x flag will use a license from the remote connection only via
the floating license mechanism.
64116 - Equipment Tag and Variable Tags are counted twice (Related
references 62806)
Single cluster systems using both cluster.tag and cluster.equip.item referencing
would double count points. In single-cluster systems, the cluster was being
omitted when resolving tags to avoid mismatch between cluster.tag vs. tag
referencing. This convention was not being followed where cluster.equip.item or equip.item was used. This has been resolved by not omitting cluster name.
Project Development Utilities
63791 - Compiler incorrectly identifying Genie when using array index
The compiler was incorrectly identifying Genies when using an array index, which
generated a Cicode compilation error message. This has now been addressed by
adjusting the way the compiler handles a sequence of "[...]" attached to a Genie.
63948 - DspPopupMenu is not showing bitmap icons
DspPopupMenu was not showing icons.
This was due to a utility in the include project being run from the [BIN] directory,
and not from the [RUN] project directory as it used to. The runtime directory is now passed to the utility as the icon directory path.
64126 - Table genie only supports 50 rows (Related references 63605)
The table genie in library_controls was only originally designed to support up to 50 rows. This has now been increased to a maximum 100 rows.
Compiler
63956 - Reports will not compile after upgrading to Version 2015
CitectSCADA 2015 Service Pack 1 30
After upgrading to version 2015, some reports would not compile. The error
message given was 'END expected'. This occurred when the last line of the auto-
generated Cicode began with a call to DevClose. Some optimizations were
introduced in 2015 to handle large reports. The associated code has now been modified so that reports compile successfully.
64013 - Upper limit of [CtEdit]MaxCicodeFunctions needs to be increased
(Related references 63620)
There was a limit of 10000 Cicode functions for a top
level project. This is controlled by [CtEdit]MaxCicodeFunctions parameter. The
maximum allowable value of [CtEdit]MaxCicodeFunctions has been increased to 32767.
64125 - Compile unsuccessful due to IFDEF Macro quotation marks
(Related references 63425)
The IFDEF macro would not support string arguments properly, requiring twice as
many quotation marks as expected. The compiler now strips all sets of quotes, and then puts one set back.
64129 - [CtEdit]CompileUnsuccessfulCommand and
[CtEdit]CompileSuccessfulCommand limited to 255 characters (Related
references 63953)
The compiler did not run [CtEdit]CompileUnsuccessfulCommand and
[CtEdit]CompileSuccessfulCommand parameters after compiling a project
(regardless of the result) if the given command was longer than 255 characters. The Citect compiler now accepts commands of up to 1023 characters.
Process Analyst
63925 - Process Analyst could not read a .PAV file in the Web Client
When Process Analyst was running in the Web Client, it could not read a .PAV file
created in a normal display client. This was due to the Web Client using an earlier
version of a DLL file. The new DLL would write icon images using a format that
the old version could not read. Process Analyst now uses a suitable format for
icon images.
If the Web Client shuts down unexpectedly while reading an existing .PAV file, the
file needs to be opened and saved by the normal client, and the new .PAV file needs to be redeployed to the webclient.
Alarms
62950 - Timestamped digital alarm logging returning unexpected result
(Related references 59399, 64019)
There was an issue in timestamped digital alarms on Process Analyst where the
alarm stayed ON and ACK even after the OFF event occurred. To fix this issue,
new functionality has been added to add an "Off, Ack" event immediately
following the "On, Ack" event. After the fix, CitectSCADA now processes correctly
the OFF and ACK events so the Process Analyst chart is drawn properly.
63687 - CTAPI SOEQuery missing records in query result
CitectSCADA 2015 Service Pack 1 31
A CTAPI SOEQuery was missing records in the query result when the amount of
SOE records in a single cluster was more than 5K. SOEQuery has now been fixed
to return the correct number of records.
63713 - Alarm server shutdown unsuccessful when running Extended
Memory mode
In some cases, the alarm server would not shutdown successfully when running
in Extended Memory mode. This was due to the alarm server not handling case insensitivity of domain user names correctly. This issue has been resolved.
63783 - Alarm server unable to operate with multiple users logged in
The alarm server would shutdown unexpectedly when multiple users were logged
in with the same user name but using different case, for example, "Admin" and
"admin". This was due to case sensitive comparison of CitectUser. This issue has now been fixed.
63836 - Client unable to display alarm properties data after restarting
alarm server (Related references 62816)
The alarm properties on a page displayed #BAD after the alarm server was
restarted, and remained #BAD until the display client was restarted. This only
occurred when multiple clusters were defined in project with unique alarm tags
without cluster prefix. If an alarm tag is referenced on a page without cluster
prefix, the system will automatically associate the cluster name to the tag
reference such that it can be resolved correctly. During a session
connect/disconnect event, the tag references need to be re-established with the
associating cluster. Tag references now correctly identify the cluster that had a state transition.
63844 - Unsuccessful alarm server shutdown
During shutdown of the Alarm server, there may have been pending client
commands with the alarm server via Cicode. These commands were not handled
correctly during shutdown and caused unsuccessful alarm server shutdown. The
system now detects a shutdown of the alarm server and properly handles the in-process alarm commands.
63906 - SOE and Alarm Summary displaying incorrect Windows user
name
If a Windows user was logged in and the name of the user contained "." (period),
any actions performed by the user were logged under "System" in the SOE and
Alarm Summary. This has now been resolved by replacing the period with "_" (underscore) when looking up a user object ID.
63909 - Cicode expression in alarm description impacted by alarm server
restart
If an alarm's description field contained a Cicode expression, it may have reverted
to "not evaluated" status if the alarm server was restarted. This has now been
resolved by recovering the description field from database when the alarm server is restarted, in the same way as other properties.
CitectSCADA 2015 Service Pack 1 32
63965 - CTAPI SOEQuery only returns records within the last 24 hours
A CTAPI SOEQuery only returned records within the previous 24 hours when
TIMEDATE filtering was not provided. SOEQuery has now been adjusted to handle this case and return more data than previous 24 hours.
63966 - AlarmSetInfo does not result in correct alarm display
In version 2015, an alarm view window no longer supported dynamic switching of
alarm types between summary and non-summary alarms views (e.g. SOE and
Active Alarms) through alarm filter updates. The alarm view window is now recreated each time a switch to a different alarm type occurs.
64002 - SOE comments display the alarm server IP address instead of the
user IP address
SOE Comments displayed the alarm server IP address instead of the user IP
address in UserLocation field when a user added an event to the SOE page. The
client machine address is now displayed in the UserLocation field of the SOE Comment.
64115 - AlarmEnable not working on alarm pages of type 4 (all configured
alarms) (Related references 62003)
Calling AlarmEnable on alarm lists showing "all configured alarms" returned error
code 274. This has now been fixed.
64121 - Alarm server process shutdown unsuccessful (Related references
63292)
During shutdown, the client infrastructure is torn down before the server
infrastructure. Thus, alarm processing (including advanced alarms) continues
beyond where AlarmCount can be called. This may cause a shut down to be
unsuccessful. This has been resolved by AlarmCount functions returning -1 (an error notification) if shutdown has already commenced.
64128 - Multiple digital time stamp alarms triggered simultaneously
display previous time stamp (Related references 61993)
If multiple digital time stamped alarms were triggered simultaneously, the
previous time stamp would display. In this case, the customer has subscribed to
the timer tags other than just via the alarm tags. The additional subscription
meant that the I/O server was reading the timer tags from the device and had a
good value for a previous (old) timer value ready to go then the alarm was
triggered and the alarm system subscribed to the timer tag. In addition to this,
the customer did not have much delay (if any) between setting the timer register
in the device and setting the alarm trigger register in the device. The mechanism
of getting data from the device cause the alarm trigger register to be read before
the timer register. If the device had a delay of at least one polltime between
setting the timer register and setting the alarm trigger register, this situation
would not have have happened. However there was no such delay. With this
precise scenario, and within very tight timing constraints (<100 ms), it was
possible that the alarm would be triggered and the timer value used would be the
previous timer value. This was fixed by changing the task that gets the timer
value to be executed one alarm scan time (500ms by default) later and increasing
CitectSCADA 2015 Service Pack 1 33
the poll rate for the subscription of the timer value. This means the appropriate timer value is used for processing the alarm.
64131 - Citect user with no privileges is not able to view all system events
on SOE page (Related references 63641)
There was some inconsistency with Sequence Of Events visibility for guest users
and configured users with no privileges. This is now resolved by adjusting the internal query.
64275 - 64-bit alarm server shutdowns unexpectedly when calling
ServerBrowseOpen()
An alarm server running as a 64-bit process would shut down unexpectedly when
the ServerBrowseOpen() Cicode function was called. The ServerBrowseOpen()
function has been extended to work on 64-bit processes.
Trends
63163 - Client will not resolve a page trend that trends particular SPC
tags
A client was unable to resolve a page trend for certain SPC tags, this was due to
an array that wasn't allocated before it was used. This is resolved by allocating
memory when it is needed.
63816 - Period (.) in a trend tag generates a compile error message
In German locale, a particular day of the month is specified using a full stop (.),
for example, "1." instead of "1st" (as it is in English). This was not recognized by the compiler. The compiler now handles this time format.
64124 - [Trend]DeleteIfIncompatible does not work when changing the
trend type (Related references 63622)
The parameter [Trend]DeleteIfIncompatible did not work when changing the
trend type from periodic to event. This was caused due to ArchiveInit ignoring an
error code pertaining to differing trend type of trend history file to configured
trend tag type. This has been fixed by updating ArchiveInit to take into account
the error condition from ITrendEngine_Open and handle it by recreating the trend
history file.
IO System
63236 - TagSubscribe() calls callback function twice
When a Cicode subscribes to a tag using TagSubscribe, there will be two updates
generated for the tag for the same value; one when the local cache is updated
locally and one when the write completes the round trip to the device. A new
optional parameter (NoUpdateForDuplicateValue) was added to TagSubscribe to allow a subscription to only generate one update.
64132 - IOServer unexpected shutdown interruption (Related references
63659)
CitectSCADA 2015 Service Pack 1 34
IOServers using peer redundancy may occasionally shutdown unexpectedly. This
has now been resolved with additional checks during shutdown process.
64133 - I/O server unexpectedly shuts down after writing to a memory
I/O device tag array (Related references 60143)
The I/O server would shut down unexpectedly after writing to a memory I/O
device tag array when the tag was previously not an array. The cached value was
not converted into an array on an I/O server restart. This has now been fixed as a correct conversion to an array now occurs on an I/O server restart.
64135 - I/O server unexpectedly shuts down at startup (Related references
63874)
An unexpected shutdown occurred if a temp file could not be created in the temp
directory for the user under which the Citect process was running. In this case,
cache persistence within the I/O server was not successful, resulting in an
unexpected shutdown. Now the I/O server logs an error message if no temp file
can be created, and an unexpected shutdown is avoided.
Cicode
59935 - The LoginForm Cicode function caused a client to stop working
Under some circumstances, after a successful login using the LoginForm Cicode
function from a popup, the created form would not be cleaned up correctly. The form will now close without disrupting the operation of the client.
63693 - Unable to attach Cicode debugger to x64 alarm process
Attaching Cicode debugger to x64 alarm process caused an unexpected system
shutdown. This was due to the truncation of 64-bit pointer values to 32-bit
values. This has now been fixed.
63748 - Constant association and page values may be lost after login
Constant associations created using Ass function, and page values created using
PageSetInt/PageSetStr could be lost if login was attempted by a different user.
The first instance was caused by the incorrect behavior of Ass function when the
page was reopened, and the second instance happened because string and
integer values of a page were not saved when reopening the page. This has now been fixed.
63772 - Enabling CodeTrace stopped operation
Enabling CodeTrace caused stopping operation when a built-in function returned a
long string (max length 255 characters) due to CodeTrace not having a suitably
sized buffer for formatting. Now a larger buffer is allocated for formatting the
CodeTrace output.
63998 - Tool tip in Genie Scrollbar_Vert in Library_Controls is not updated
correctly (Related references 63170)
CitectSCADA 2015 Service Pack 1 35
Tool tip in the Scrollbar_Vert from Library Controls was not updated with the
correct position. It appears the tool tip was one step behind the actual position
movement. The position is now updated correctly.
64113 - Error notification returned when reading a line from a file (Related
references 63140)
While using some file operations, reading a line from a file with some corruption
was not possible. An internal buffer with appropriate size has been implemented to support this case.
64117 - FormOpenFile function does not open to the default path (Related
references 63690)
When the FormOpenFile function is called, the specified default path is only used
the first time. Subsequent calls use the most recently used path. To address this,
the function has been modified to include an additional boolean parameter: FormOpenFile(sTitle, sFileName, sFilter [, bResetToDefault = FALSE])
64120 - StrToPeriod Cicode function does not work if value is greater than
32767(Related references 63445)
Seconds were being cast to a SHORT, which is not a valid cast if only seconds are
specified. This resulted in an overflow. This has been resolved by storing seconds in a LONG.
Display System
64014 - Using ServerInfo function causes high CPU usage (Related
references 63562)
Setting the Cicode function ServerInfo("Client",0) resulted in expensive tasks that
attempted to resolve network names internally, which caused high CPU usage. This behavior is resolved now by caching the data.
64118 - Intermittent shut down on startup (Related references 63461,
61770)
Use of page metadata Cicode functions in startup Cicode may result in an
unexpected shutdown. This has now been fixed by applying additional checks on
relevant functions.
Runtime Issues
64122 - Unnecessary memory usage when launching help from Kernel
(Related references 63230)
Repeatedly launching the help from the Kernel may have resulted in unnecessary
memory usage in the corresponding runtime process. Each time the help was
opened, a new window was created with its own thread and stack allocation.
However, the window handle was not tracked, and the window was not closed.
This has been resolved by keeping track of the window handle, and closing it before opening a new help window.
CitectSCADA 2015 Service Pack 1 36
64193 - Unable to run a server when DNS Server or Hostname is
configured as a Network Address
Runtime would not launch a server if the Address field in Network Addresses form
did not match the hostname, even if the IP was the same. Runtime Manager now
also compares the IP addresses returned from DNS for a network point with local machine's IP addresses to decide whether a server should be launched.
General
63661 - Citect Explorer stops working following an unsuccessful license
check during startup
In some cases, Citect Explorer would stop working if a license check was
unsuccessful during startup of the configuration environment. When Project Editor
and Graphics Builder are launched, they look for "Development License" by using
common protection library. The protection library goes through the protection
providers (SentinelProvider, OOSAProvider, etc.) to check the license. Since there
is no such Development License, the default license is returned in the end and the
flag indicating if it is a valid Development License is 'true'. Development License
checking has been removed from the code as it is legacy and not required
anymore.
63691 - 64-bit alarm server raises exception when running the cicode
MsgOpen with an invalid value
A 64-bit alarm server would raise an exception when running Cicode. This
occurred when MsgOpen was given a value of 0 for the 'fn' argument, which
indicated that there was no message callback function. An empty string is now
placed on the stack for this argument instead of a long with a value of 0, no exception will be raised in this case.
63717 - Files included in CustFiles.zip are not extracted at runtime
If files were deleted that were supposed to be extracted from CustFiles.zip, the
files would not get extracted on a client at runtime. This was due to a change in
behavior in [CtEdit]Copy and [CtEdit]Run for an earlier bug fix. The behavior now
is as follows: if [CtEdit]Copy is not specified, CustFiles.zip will unzip at client
process startup; if [CtEdit]Copy is specified, the behavior is the same as it
currently is; if [CtEdit]Copy is specified and its value is equal to [CtEdit]Run, then
custFiles.zip is not uncompressed at client process startup. This is because the
timestamps are the same.
63789 - Dynamic associations not updating window titles
Dynamic associations used to define a window title were not working correctly
following the implementation of partial associations for Super Genies. This was
resolved through changes to GenieAssToStr() function. The dynamic association for the window title is considered a string. This has now been fixed.
63877 - Menu items not appearing on "lib_controls" tree Genie (Related
references 63584)
Menu items on the 'lib_controls' Tree Genie were randomly displayed as a blank
line upon page entry. This persisted until the user clicked on the tree to force it to
CitectSCADA 2015 Service Pack 1 37
refresh. This was due to the Cicode task that renders the tree node cancelling the
rendering prematurely if another tree reload was requested. This has now been
fixed.
63905 - Process Analyst graphics resources causing client shutdown
If Process Analyst graphics resources were constructed but not initialized, they
would not be properly destructed and cause client shutdown. This has now been
modified to delete objects in the owner's destructor if they have not been initialized.
Remaining Modules
62861 - Kernel window position sometimes is out of viewable area
On shutdown, the Kernel window position stored in the Citect.ini parameter
[Kernel]WindowPosition would occasionally contain invalid co-ordinates,
particularly in the case where the kernel window was minimized. This would make
the Kernel window position is out of viewable area. Now after the fix, the Kernel will no longer save the window co-ordinates in this case.
63704 - Citect Runtime would not launch on a computer with more than
32 CPUs
Citect Runtime was unable to launch on a machine with more than 32 CPUs. After
the fix, this no longer occurs. Runtime Manager will start up correctly on a machine with more than 32 CPUs.
63768 - Space between equipment fields was removed
A space between two equipment fields for a tag/alarm comment was truncated
due to incorrect parsing, making it difficult to decipher the information that was
displayed. The removal of a space no longer occurs.
63834 - AccControl Cicode function blocks a Cicode task (Related references
62989)
Calls to the AccControl() Cicode function could cause the Cicode task to become
blocked when running a redundant pair of report servers. This has now been fixed
by specifying the original instance identity when sending the functional message
from server to server, so that the server reply message sent to the client can be identified.
63843 - Visual Basic user function named "Visible" not working
User-created function named "Visible" in CitectVBA was not working when called.
This was due to another function with the same name being called instead of the
user-created function. The function lookup procedure has now been changed to
redirect the function called to the first seen, which is the user-created function.
63868 - Equipment Editor removing calculators manually added to
equipment template
CitectSCADA 2015 Service Pack 1 38
Calculators in the output sections of the XML file were being incorrectly removed.
This was because the entire XML file was rewritten when Equipment Editor saved
a template. This has been resolved and calculators are persisted in both the input and output sections.
63916 - Citect VBA can not access tags
When a VBS function was called via VbCallOpen the Citect tags used in the VB
scripts were not subscribed. The VB script engine would return a runtime error
message when it tried to read the tag values. These tags are now subscribed to
when the VBS function is opened.
63924 - Cancelling update equipment process produces misleading
message of 'Equipment update successful'
Cancelling update equipment process produced misleading message of
'Equipment update successful'. Cancelling the process now produces the message 'Cancelled'.
64020 - Multiple client processes started while Citect is running as a
service
While Citect was running as a service, a new client process would start every time
a customer clicked on the Citect32.exe or the RuntimeManager.exe shortcut.
Protection has been added into Runtime Manager so that it will not launch more than one service display client at a time.
64024 - Character not processed correctly in localized strings (Related
references 61254)
The escape character '^' was not being processed correctly in localized strings.
This functionality now works as described in the Help documentation.
64114 - Privilege on menu configuration does not take effect (Related
references 63028)
Execution of the menu command for a menu configuration was not restricted for a
logged on user who did not have the required privileges. To solve this, the behavior of the MenuNodeRunCommand() Cicode function was changed.
64119 - French Translation of Historize is incorrect on Alarm forms
(Related references 63640)
French word Chronique is corrected to Historiser on alarm forms.
64123 - Report server subscribes to the standby I/O server causing stale
data in reports (Related references 63391)
Report server resolves tags at start up, so it will get data from the primary I/O
device if it is available. However Report server sometimes resolves and subscribes
to the tags from standby IODevice instead of the primary, which causes stale
values to be received by the report server. This has been resolved by checking that the tags are resolved to the primary device if available.
CitectSCADA 2015 Service Pack 1 39
64127 - Equipment Editor does not show some multi digital state fields
(Related references 63665)
The multi digital alarm state fields were not being displayed in the Equipment
Editor types forms. This has now been resolved by using the DBF field name
instead, If no display name is found.
64134 - Unexpected shutdown in ADO Cicode function (Related references
63747)
An unexpected shutdown would sometimes occur on the first read of a connected
ADO record set if the read was not successful. CitectSCADA now returns an error message if the read is not successful.