![Page 1: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/1.jpg)
1
Chemical Enhanced Oil Recovery What is New, What Works, and Where Use It
Dr. Gary Pope Professor Texaco Centennial Chair in Petroleum Engineering, The University of Texas at Aus;n
Dr. Mojdeh Delshad Research Professor Center for Petroleum and Geosystems Engineering, The University of Texas at Aus;n
Dr. Ma;hew Balhoff Associate Professor Frank W. Jessen Centennial Fellowship in Petroleum Engineering, The University of Texas at Aus;n
![Page 2: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/2.jpg)
2
For more informa<on about Chemical EOR research at CPGE, please visit:
hGp://cpge.utexas.edu/?q=IAP_ChemicalEOR Research sponsors include:
![Page 3: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/3.jpg)
3
Gary Pope Center for Petroleum and Geosystems
Engineering University of Texas at Aus<n
3
![Page 4: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/4.jpg)
4
Chemical EOR
• Polymer flooding (PF) • Surfactant-‐polymer (SP) flooding • Alkali-‐surfactant-‐polymer (ASP) flooding • Alkali-‐co-‐solvent-‐polymer (ACP) flooding • Low tension gas flooding (LTG) • Chemicals combined with hea<ng • Surfactant enhanced imbibi<on • Polymer gels for blocking or diver<ng flow • Polymers combined with low salinity
![Page 5: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/5.jpg)
5
Why Chemical EOR? • Chemical EOR is evolving and ge[ng beGer with <me due to innova<ons and experience
• The cost of chemicals has decreased by a factor of two rela<ve to the price of crude oil while at the same <me the quality of the chemicals has improved
• Hybrid processes have been developed and con<nue to improve: – Low tension gas flooding – Surfactants combined with heat – Polymers combined with smart water – Gravity stable surfactant floods
![Page 6: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/6.jpg)
6
Where to Use It • Favorable geology as indicated by good water flood performance, interwell tracers, single well tracers,….
• High porosity and permeability • Oil viscosity
– Up to 10,000 cp for PF/ACP – Up to 200 cp for SP/ASP – Even higher oil viscosity when combined with hea<ng (hot water, electrical hea<ng)
• Reservoir temperatures up to 250 °F • Reservoir salini<es up to 250,000 ppm TDS
![Page 7: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/7.jpg)
7
EOR Screening Criteria Property
CO2/ NGL/WAG
N2 WAG
Steam Drive SAGD Polymer SP/ASP ACP
Low Tension Gas
Oil API >22 >40 >8 >6 >12 >12 12-25 >20
Oil Visc., cp <10 <10 100-10,000 1000-106 <10,000 <200 20-1000 <20
Reservoir Depth, ft
>2000 >6000 300-2000 400-2000 >500 >500 >500 >500
Perm. (k), md >1 >1 >250 >5000 >10 >10 >10 >1
Porosity >10 >10 >30 >30 >10 >15 >15 >10
φhSo, ft >1 >1 >10 >10 >1 >5 >1 >1
Pressure, psia >MMP >MMP <1000 <1000 -- -- -- --
kh, md-ft >100 >100 >50000 >105 >1000 >1000 >1000
ROS, % >20 >20 >40 >40 >30 >20 >20 >20
Net pay, ft >10 >10 >50 >100 >10 >10 >10 >10
Salinity, ppm -- -- -- -- <250000 <250000 <250000 <250000
Temp., °F -- -- -- -- < 250 <250 <250 --
![Page 8: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/8.jpg)
8
Polymer Flooding The primary objec;ve of polymer
flooding is to provide beHer displacement and volumetric sweep efficiencies during a waterflood
![Page 9: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/9.jpg)
9
Example of Lower Remaining Oil SaturaKon of Polymerflood Compared to Waterflood
Polymer flood
vi = 1.0 ft/day µp = 17 cp Soi = 0.85 Sor = 0.26 ΔSor = -0.12
Waterflood
vi = 13 ft/day µw = 0.48 cp µo = 80 cp Soi = 0.87 Sor = 0.38
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00
Oil
Satu
ratio
n (%
)
Pore Volumes
So - Polymer
So - Water
![Page 10: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/10.jpg)
10
Polymer Flooding Advances • Quality of commercial hydrolyzed polyacrylamide (HPAM)
polymers is much beGer resul<ng in high injec<vity in both ver<cal and horizontal wells
• HPAM polymers are available with molecular weights up to at least 20 million
• Equipment and procedures for field prepara<on of high quality polymer solu<ons are now rou<ne
• Water sojening is now inexpensive (as low as US$ 0.15 per Bbl of seawater when done on a large scale) and enables the use of HPAM even at high temperature
• New polymers can be used in hard brine at high temperature
![Page 11: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/11.jpg)
11
Polymer Flooding
• Increasing water viscosity by adding polymer to the water helps minimize the adverse effects of reservoir heterogeneity and will benefit almost all water floods even if the oil viscosity is low
• The benefits are greatest when polymer is injected at high concentra<on for a long <me e.g. more than one pore volume
• Under favorable condi<ons, the polymer cost is in the range of $1 to $5 per Bbl of addi<onal oil
![Page 12: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/12.jpg)
12
Surfactant Methods • The main objec<ve of SP/ASP/ACP flooding is to recover the oil remaining ajer water flooding by mobilizing oil trapped in pores due to capillary forces (residual oil satura<on)
• The interfacial tension between the oil and water must be reduced by about 10,000 fold to mobilize all of the trapped oil in the swept zone
• Adding a high molecular weight polymer to the surfactant solu<on to increase its viscosity vastly improves the oil recovery
![Page 13: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/13.jpg)
13
0%
20%
40%
60%
80%
100%
0.0 0.5 1.0 1.5 2.0Pore Volumes
Oil
Cut
or C
umul
ativ
e O
il R
ecov
ered
Example Oil Recovery of 100 cp Oil from Core 30% PV ASP Slug (0.3% surfactant); Surfactant reten<on=0.02 mg/g
Oil Cut
Cumulative Oil Recovered Curves: UTCHEM Points: Experiment
ASP slug diluted with polymer drive
![Page 14: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/14.jpg)
14
New Surfactants and Co-‐solvents • Several new classes of high-‐performance surfactants and co-‐solvents have been developed in recent years
• Wide range of molecular weights up to 4000 • Include inexpensive ethylene oxide and propylene oxide to improve salinity and hardness tolerance
• Carboxylates and sulfonates stable up to 250 °F • Made from commercial feedstocks • Use synergis<c mixtures • Cost about $2.50/lb of ac<ve surfactant
![Page 15: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/15.jpg)
15
Low Surfactant RetenKon • The amount of surfactant needed to recover oil is directly propor<onal to surfactant reten<on so lowering the surfactant reten<on is the key to low chemical cost per Bbl of addi<onal oil
• Surfactant reten<on is caused by adsorp<on on the rock and phase trapping of viscous emulsions
• Phase trapping is ojen the largest contribu<on to surfactant reten<on
• Lower emulsion viscosity results in lower surfactant reten<on
![Page 16: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/16.jpg)
16
Low Surfactant RetenKon • Surfactant reten<on has been reduced by a factor of about 3 in recent years
• Alkali reduces surfactant reten<on a factor of about 2
• Surfactant reten<on in sandstones with high clay content has been reduced to values in the range of 0.02 to 0.11 mg/g rock and similar values have been measured in carbonate cores
• Good mobility control is essen<al to get such low reten<on
![Page 17: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/17.jpg)
17
ConvenKonal Co-‐solvent • 30% oil; µo=~5.5 cP @ 25°C • 0.5% TDA-‐13PO-‐SO4-‐, 0.5% C20-‐24 IOS • 0% & 2% IBA
![Page 18: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/18.jpg)
18
New Co-‐solvent • 50% oil; µo=2.9 cP @ 55°C • 0.6%OA-‐45PO-‐10EO-‐SO4-‐, 0.4% C15-‐17 ABS • 1% phenol-‐4EO
![Page 19: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/19.jpg)
19
Surfactant Reten<on = 0.075 mg/g rock Sandstone with 11.9 wt% clay, µME/µo = 1.9
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
0%
20%
40%
60%
80%
100%
0.00 0.50 1.00 1.50 2.00
Surf
acta
nt/C
o-so
lven
t Con
. (pp
m)
Cum
ulat
ive
Oil
Rec
over
ed /O
il C
ut/S
orc
(%)
Pore Volumes
Cumulative Oil Oil Cut So Surfactant Conc. Co-solvent conc.
0.3 PV ASP Polymer Drive
![Page 20: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/20.jpg)
20
Surfactant Reten<on=0.11 mg/g rock Sandstone with 11.9 wt% clay, µME/µo=2.2
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
20%
40%
60%
80%
100%
0.00 0.50 1.00 1.50 2.00
Surf
acta
nt C
once
ntra
tion
(Nor
mal
ized
to In
ject
ion
Con
cent
ratio
n)
Cum
ulat
ive
Oil
Rec
over
ed /O
il C
ut/S
orc
(%)
Pore Volumes
Cumulative Oil Oil Cut So Total Surfactants 2EHS-7PO-SO4
0.4 PV
ASP Slug
Polymer Drive
![Page 21: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/21.jpg)
21
Economic Significance of Reduced RetenKon
References • Wang (1993), Flaaten (2008) Assump<ons • Porosity: 20% • Recovery Factor: 25% OOIP • Size of Chemical Slug: 0.3 PV • Surfactant to Co-‐solvent Ra<o: 1 • Surfactant: $2.00 / lb
Surfactant Retention (mg/g rock)
Surfactant Concentration (wt%)
Surfactant Cost ($/BBL Produced Oil)
0.40 (1993) 1.78% 18.21 0.20 (2008) 0.88% 9.11 0.08 (2015) 0.36% 3.64
![Page 22: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/22.jpg)
22
Live Oil Coreflood using new TSP Surfactant (Oil Cut in ASP Field Pilot Nearly the Same as Coreflood)
0%
5%
10%
15%
20%
25%
30%
35%
40%
45%
0%
20%
40%
60%
80%
100%
0.00 0.50 1.00 1.50 2.00
Oil
Satu
ratio
n (%
)
Cum
Oil
Rec
over
ed (%
), O
il cu
t (%
)
Pore Volumes
Cum Oil Recovery Oil Cut
So
PD I ASP Slug Emulsion
Breakthrough
PD II
97.4%
1.01%
![Page 23: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/23.jpg)
23
Take Home • The combined impact of all of the new Chemical EOR and oilfield technology is a game changer – New and beGer chemicals at lower real cost – Increased performance at lower cost per Bbl oil – New hybrid methods for both light and heavy oil – BeGer models are available to design and predict field performance
– BeGer enabling technologies e.g. horizontal wells • But it’s s<ll complex technology and geology s<ll maGers, and so do people
![Page 24: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/24.jpg)
24
Mojdeh Delshad Research Professor, Center for Petroleum
and Geosystems Engineering, The University of Texas at Aus<n
![Page 25: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/25.jpg)
25
Modeling Chemical EOR Methods Our Mission Since 1977
• Mechanis<c modeling of CEOR processes from bench to pilot to field scales
• Modeling geochemical reac<ons for more challenging fluid and reservoir condi<ons – Hard brine with EDTA, soj brine with sodium carbonate – Carbonate reservoirs – Low salinity waterflood
• Modeling hybrid methods – WeGability modifica<on (surf. in fractured carbonates) – Low salinity or smart water (low salinity/ polymer) – Hot water (hot SP) – Foam (surf/foam) – Gas (low tension gas)
25
![Page 26: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/26.jpg)
26
UTCHEM ApplicaKons § Tracer tests (single well, interwell) § Polymer flooding
§ Viscoelas<c polymer § Polymer degrada<on mechanisms § Injec<vity correc<on
§ Surfactant/polymer flooding
§ Alkaline/surfactant/polymer flooding § Geochemical reac<ve simula<ons
§ Polymer/crosslinker (gel) for profile modifica<on
§ WeGability altera<on with surfactants
26
§ Low salinity waterflood
§ Microbial EOR § Biological reac<ve simula<ons
• Hot surfactant/polymer flood for
heavy oil • Steam • Electrical hea<ng • Hot water
• Low tension gas flooding (SAG, ASG) • Foam op<ons • Black oil op<on
![Page 27: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/27.jpg)
27
Chemical EOR Methods for Heavy Oils
27
![Page 28: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/28.jpg)
28
Polymer Flooding of Offshore Viscous Oil with Strong Aquifer Support
Model size 3805 ^ x 3608 ^ x 256.66 ^
No. of gridblocks 58 x 55 x 52
Reservoir temperature, C 40
Oil viscosity, cp 1500
Average porosity 0.31612
Average reservoir perm. (md)
Kx = 18242, ky = 18242, kz = 10945
Reservoir brine TDS, ppm 52000
28
![Page 29: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/29.jpg)
29
InjecKon Well LocaKon OpKmizaKon
Water viscosity at 635 d
WOC
Inj. well Producer
29
![Page 30: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/30.jpg)
30
Oil Viscosity and Injector LocaKon
300 cp oil
1520 cp oil
30
![Page 31: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/31.jpg)
31
Alkaline -‐ CoSolvent -‐ Polymer (ACP) New Technology
q Addition of co-solvent to AP leads to ACP q Low IFT & mobility control without synthetic surfactant q Breaks viscous and unstable emulsions q Effective only with oils that form soaps (active oil)
q Robust and less expensive than ASP q Co-solvents insensitive to geochemistry and temperature q Low adsorption q Lower microemulsion viscosity compared to ASP
31
![Page 32: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/32.jpg)
32
ACP Lab Coreflood Recoveries • Oil viscosity from 70 to 4800 cp • TerKary oil recoveries from 80 to 95% OOIP
32
![Page 33: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/33.jpg)
33
ACP Pilot Project
IniKal Oil SaturaKon Final Oil SaturaKon
ü 0.5 PV polymer preflush ü 0.11 PV ACP slug ü 1 PV polymer
33
![Page 34: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/34.jpg)
34
Improve Displacement Efficiency using ViscoelasKc Polymers
34
![Page 35: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/35.jpg)
35
Residual Oil SaturaKon vs. Deborah Number
( )1
−= +
+ ×
l hh or or
or orDe
S SS STPP N
• : residual oil satura<on at high NDe
• : residual oil satura<on at low NDe
• TPP : fi[ng parameter
0
0.1
0.2
0.3
0.4
0.0001 0.001 0.01 0.1 1 10 100 1000
S or
NDe
horSlorS
35
![Page 36: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/36.jpg)
36
Sandpack Experiment with 250 cp Oil
Water Flood
Polymer Flood
24% reduction in Sor
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
0% 10% 20% 30% 40% 50% 60% 70% 80% 90%
100%
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
Cum
Oil
Rec
over
ed (%
)
Pore Volumes
Oil saturation
Cum. Oil Oil Cut
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90%
100%
0.00 0.50 1.00 1.50 2.00
Oil
Satu
ratio
n (%
)
Cum
Oil
Rec
over
ed (%
)
Pore Volumes
36
![Page 37: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/37.jpg)
37
Accurate Polymer InjecKvity Models • Radial model with fine-‐grid (1 j in r-‐direc<on) as true solu<on
• Coarse grid Cartesian model (77 j x 77 j)
37
![Page 38: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/38.jpg)
38
InjecKvity CorrecKon Models • Results are very close to radial simula<ons.
Analytical
No correction
Radial
Skin = -2.86
38
![Page 39: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/39.jpg)
39
Modeling Unstable Polymer Floods
µo = 100 cp µo = 1000 cp (base case)
µo = 10000 cp
So t = 0.30 PV
39
![Page 40: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/40.jpg)
40
Low-‐Tension Surfactant-‐Gas • Similar to SP/ASP but Gas is used instead of Polymer
Ø Reservoirs with high-salinity/high-temperature Ø No injectivity limitation with tight formation/NFR/viscous oil
Ø Foam is an alternative mobility control Ø Foam can divert surfactants to matrix or low permeability zones Ø Mobilization of trapped oil
• Favorable for both secondary & tertiary floods
• IFT reduction • Wettability alteration Surfactant-1
Foaming to control mobility, increase sweep efficiency, divert surfactants Surfactant-2
19
![Page 41: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/41.jpg)
41 41
Parameters Maximum resistance factor, 75 Critical oil saturation, 0.3 (vol/vol) Critical surfactant concentration, 0.00085 (vol/vol) Gas shear thinning exponent, 1.0 Water saturation tolerance, 0.01 Reference gas velocity, 1.65 (ft/Day)
Water saturation at critical capillary pressure, 0.25 (vol/vol)
maxRF*oS
sC
σε
g ,Refu*wS
SimulaKon of SAG Coreflood
Low trapping rel. perm properties are
dominated
High trapping rel. perm properties are
dominated
Foam properties are dominated
![Page 42: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/42.jpg)
42
Gravity-‐Stable Surfactant (SGS) Floods • No need for mobility control with either polymers or
high pressure gas to reduce cost, complexity and uncertainty
• Using horizontal wells gives higher volumetric sweep efficiency and maximum critical velocity compared to vertical wells.
• Practical if there are no barriers to vertical flow and the vertical permeability is high.
• Some of the world’s largest oil reservoirs are high-temperature, moderate-permeability, light-oil reservoirs and thus good candidates.
42
![Page 43: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/43.jpg)
43
SGS Coreflood in Fractured Carbonates
0
10
20
30
40
50
60
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8
Recovery (%OOIP)
PV
Water floodSurfactant floodWater floodSurfactant flood
Model
LAB
SGS Experiment
43
![Page 44: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/44.jpg)
44
SimulaKon of SGS Experiment Oil Saturation at 1.75 PV Surfactant Conc. at 1.75 PV Permeability Distribution
Injection
Production
Nx = 5, Ny = 5, Nz = 10 CorrelaKon length = 0.01 ^ Mean value for permeability = 1000 md Dykstra-‐Parsons coefficient = 0.975 44
![Page 45: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/45.jpg)
45
SimulaKon of SGS Experiment Effect of Grid Size
45
![Page 46: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/46.jpg)
46
Recent Chemical EOR Field Projects
46
![Page 47: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/47.jpg)
47
ASP Pilot in Mangala Field in India
• 27 API oil (19 cp) • Excellent perm-‐por sand • 62 C temperature ASP formula<on developed at UT
• 0.3% surfactant (TSP, IOS) • 3% Na2CO3 • 3000 ppm FP3630 polymer
• 80% oil cut with performance similar to the corefloods • No produced fluid issues (no emulsion etc.) • Commercial polymer flood in progress • Plan for larger ASP pilot in progress
![Page 48: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/48.jpg)
48
ASP Single Well Tests in Challenging Carbonate Reservoir in Kuwait
48
• Thick, heterogeneous Sabriyah Mauddud with 1-‐100 mD and 80°C
• ASP Formula<on • Sodium carbonate, 1.5 % surfactants (Carboxylate, 2xIOS)
• SWTT #2 being diverted around ASP (top image)
• Perform SWTT #2 in polymer to stably displace ASP • Sorw = 0.39, Sorc = 0.05 • 34 satura<on units recovered • 89% recovery of waterflood residual oil saturaKon
![Page 49: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/49.jpg)
49
Chemical Enhanced Oil Recovery What is New, What Works, and Where Use It
Q&A Please enter your ques<ons in the chat box on the lej.
Dr. Gary Pope Professor Texaco Centennial Chair in Petroleum Engineering, The University of Texas at Aus;n
Dr. Mojdeh Delshad Research Professor Center for Petroleum and Geosystems Engineering, The University of Texas at Aus;n
Dr. Ma;hew Balhoff Associate Professor Frank W. Jessen Centennial Fellowship in Petroleum Engineering, The University of Texas at Aus;n
![Page 50: Chemical Enhanced Oil Recovery What is New, What Works, and](https://reader033.vdocuments.us/reader033/viewer/2022051302/5878b1041a28ab0b198bd96d/html5/thumbnails/50.jpg)
50
Thank you!
Ques<on? Comments? Please contact us!
Dr. Gary Pope: [email protected]
Dr. Mojdeh Delshad: [email protected]
Dr. MaGhew Balhoff: [email protected]
Comments? [email protected]
*CEU verifica;on is no longer available for this webinar.