TABLE OF CONTENTS
INTRODUCTION ................................................................. 3 LEED RATING SYSTEM OVERVIEW .............................. 4 LEED FOR NEW CONSTRUCTION................................... 4,5 ENERGY & ATMOSPHERE (EA)....................................... 6
EA Prerequisite 2 – Minimum Energy Performance EA Prerequisite 3 – Fundamental Refrigerant Management
EA Credit 1 – Optimize Energy Performance EA Credit 4 – Enhanced Refrigerant Management EA Credit 5 – Measurement & Verification
INDOOR ENVIRONMENTAL QUALITY (EQ)................. 7
EQ Prerequisite 1 – Minimum IAQ Performance EQ Credit 1 – Outdoor Air Delivery Monitoring EQ Credit 2 – Increased Ventilation
EQ Credit 5 – Indoor Chemical & Pollutant Source Control EQ Credit 6.2 – Controllability of Systems: Thermal Comfort EQ Credit 7.1 – Thermal Comfort: Design
CARRIER COMMERCIAL PRODUCTS AND LEED CERTIFICATION ................................................................. 7-9 SYSTEM SCHEMATICS...................................................... 10-15 Packaged Large Rooftop VAV (Variable Air Volume).. 10 Packaged Small Rooftop VVT® (Variable Volume and Temperature) ........................................................... 11 WSHP (Water Source Heat Pump) Tower Loop ............ 12
Chilled Water VAV (Variable Air Volume) .................. 13 Chilled Water Fan Coil ................................................... 14
Underfloor Air Distribution (UFAD).............................. 15
INTRODUCTION There is a nationwide trend toward constructing green buildings that meet sustainable design construction standards. To help identify and promote standards for environmentally responsible construction and high- performance operation, the U.S. Green Building Council (USGBC) developed the LEED® (Leadership in Energy and Environmental Design) rating system.
The LEED rating system is a widely recognized third-party certification standard that offers voluntary certification for buildings and accreditation of professionals. Although certification is voluntary, many federal, state, and local governments now require that the design architects or engineers on official projects demonstrate that they have performed the data collection and analysis necessary to meet the requirements of the LEED standard. (See Fig. 1.)
Fig 1. State and Local Governments with LEED Requirements
3
LEED® RATING SYSTEM OVERVIEW The LEED rating system includes several specific standards covering all aspects of the design, operation, and construction of buildings. The LEED for New Construction (LEED-NC) standard covers new commercial construction and major renovation projects and issues points for achieving credits in six categories of building design: Sustainable Site (SS), Water Efficiency (WE), Energy & Atmosphere (EA), Materials & Resources (MR), Indoor Environmental Quality (EQ), and Innovation & Design Process (ID). The LEED for Existing Buildings (LEED-EB) standard includes guidelines for sustainable efficiency and maintenance and for upgrades to meet current performance requirements. The LEED-EB system can be used to certify existing non-LEED buildings as well as buildings that had received certification under LEED-NC and are seeking re-certification. The USGBC encourages building owners to enroll in LEED-EB at the time of LEED-NC certfication in order to achieve sustainable building performance. Carrier Commercial Service product and service offerings can contribute to meeting the goals of the LEED-EB standard through sustainable preventive maintenance solutions and planned upgrades to equipment and systems. Preventive Maintenance Service Agreements are available for all brands of rooftops, chillers, boilers, compressors, air-handlers, cooling towers, pumps, variable speed drives, controls and accessories. Carrier Commercial Services can also install and service building automation and control systems and energy saving solutions including microturbines and variable speed drives. These products can contribute to sustainable, efficient operation of a building and should be considered by owners seeking LEED-EB certification. The following two LEED standards are designed to address situations in which responsibility for sustainable choices is split between building developers/owners and tenants. The LEED for Commercial Interiors (LEED-CI) standard includes categories that are similar to those found in the LEED-NC standard, but with a focus on categories that may be under the control of the building owners or tenants. For instance, energy performance optimization addresses lighting and lighting controls, while resource utilization addresses interior building systems and furnishings.
The LEED for Core and Shell (LEED-CS) standard is complementary to the LEED for Commercial Interiors and establishes standards for basic building elements, such as structure and building level systems, which are under the control of the building developer. Other LEED standards specifically address green building requirements for Homes, Schools, Multiple Building Campuses, and Retail Operations. A pilot program is currently underway to establish a LEED rating system for Neighborhood Development. LEED FOR NEW CONSTRUCTION This paper will focus on the LEED rating system for New Construction. As noted earlier, LEED-NC 2.2 issues points for achieving credits in the following categories: Sustainable Site, Water Efficiency, Energy & Atmosphere, Materials & Resources, Indoor Environmental Quality, and Innovation & Design Process. Buildings and systems can achieve basic certification or reach the silver, gold, or platinum level of certification, depending on the number of points awarded. (See Fig. 2.) The LEED system does not certify products, however, the selection of products is critical to obtaining LEED certification for a building, because the right products can help meet the goals of green construction and contribute to earning LEED points. The choice of HVAC products, in particular, can have a significant impact on LEED certification, as the HVAC system directly impacts two categories that together contribute to 40% of the available points. (See Fig. 3.)
Fig. 2. 69 Possible LEED Points
Certified (26-32)Silver (33-38)
Gold (39-51)
Platinum (52-69)
4
The achievement of points in any particular credit area depends on the combination of products selected and the specific application of those products. Therefore, no products or programs can claim that their use will guarantee that LEED® points will be awarded. Carrier HVAC products, which are built to high standards of energy efficiency and indoor air quality, can help building owners earn LEED points by contributing to the achievement of credits in the important categories of Energy & Atmosphere (EA) and Indoor Environmental Quality (EQ). Success in the category of Energy & Atmosphere recently became essential to LEED certification when the USGBC decided to institute a new requirement. The mandate requires that all newly registered LEED projects achieve at least two points in the Optimize Energy Performance area. These points are awarded under the EA category. Another LEED-NC category to which Carrier products may make a contribution is the category of Innovation & Design Process. In this category, Credits 1.1
through 1.4 allow points for exceeding requirements in one of the other 5 categories of the LEED-NC rating system (i.e., Sustainable Site, Water Efficiency, Energy & Atmosphere, Materials & Resources, Indoor Environmental Quality). Points in the ID category may also be earned by demonstrating innovative performance in other Green Building categories. One innovative Carrier product that may contribute to a credit in the ID category is the Carrier Microsteam® turbine generator. The Carrier Microsteam turbine provides sustainable energy recovery by using existing steam sources to generate usable electric energy. The following outline lists the sections in which the application of HVAC equipment can contribute to EA and EQ credits and identifies the LEED points available if the credit standard is met. Contact your Carrier Sales engineer to discuss an innovative HVAC system that may contribute to earning ID Credits.
Energy & Atmosphere (17 points) HVAC Contribution 12 of 17 points
Material & Resources (13 points)
Innovation & Design Process (5 points)
Sustainable Site (14 points)
Water Efficiency (5 points)
Indoor Environmental Quality (15 points) HVAC Contribution 5 of 15 points
Fig. 3. LEED-NC Overview
5
ENERGY & ATMOSPHERE (EA) 12 HVAC-RELATED LEED® POINTS POSSIBLE NOTE: Two of the three prerequisites in the EA category relate to HVAC equipment. Carrier products can meet the applicable requirements of each of these relevant prerequisites. EA Prerequisite 2 – Minimum Energy Performance Establish the minimum level of energy efficiency for the building or system by specifying Carrier equipment that meets the energy efficiency and control requirements of ASHRAE 90.1-2004. EA Prerequisite 3 – Fundamental Refrigerant Management Reduce ozone depletion by specifying units that do not use CFC refrigerants. All new Carrier equipment uses non-CFC refrigerants. EA Credit 1 – Optimize Energy Performance 1 to 10 Points Reduce energy cost of proposed building compared to ASHRAE 90.1-2004 minimum tables. Carrier units that are designed for good part-load performance, heat reclaim, or system energy saving features such as demand control ventilation (DCV) can contribute to earning points. In addition, the Carrier HAP (Hourly Analysis Program) is an approved program for determining compliance with these requirements.
EA Credit 4 – Enhanced Refrigerant Management 1 Point Minimize the Ozone Depletion Potential (ODP) and Global Warming Potential (GWP) of the system. Carrier units that use reduced refrigerant charges and environmentally sound refrigerants, such as Puron® R-410A refrigerant, can meet the requirements for this credit. ODP/GWP calculation for acceptable charge of R-134a
• packaged unit—2.8 lb/ton • scroll or reciprocating chillers—3.30 lb/ton • centrifugal or screw chillers— 3.03 lb/ton
ODP/GWP calculation for acceptable charge of R-410A
• packaged unit—1.98 lb/ton • scroll or reciprocating chillers—2.11 lb/ton • centrifugal or screw chillers—2.17 lb/ton
EA Credit 5 – Measurement & Verification 1 Point Develop and implement a plan to account for building energy consumption over time. Carrier equipment control systems, such as the Carrier Comfort Network® (CCN) controls, can be configured to track energy usage and monitor the performance of fans, compressors, or heating devices. Data can be collected and used to develop trend logs.
6
INDOOR ENVIRONMENTAL QUALITY (EQ) 5 HVAC-RELATED LEED® POINTS POSSIBLE NOTE: There are two prerequisites in the EQ category, but only one relates to HVAC equipment. Carrier products can meet the applicable requirements of this prerequisite. EQ Prerequisite 1 – Minimum IAQ Performance Establish minimum indoor air quality (IAQ) performance by specifying units that meet the ventilation rates described in ASHRAE 62.1-2004. (applies to all airside equipment). Carrier units covered by this standard can meet the applicable construction and performance requirements. EQ Credit 1 – Outdoor Air Delivery Monitoring 1 Point Provide capacity for ventilation system monitoring. This credit requires monitoring of CO2 in densely occupied spaces and monitoring of outdoor airflow in other spaces. Carrier units that use DCV (when output can be monitored) or air-handling units with airflow stations can help qualify for this point. EQ Credit 2 – Increased Ventilation 1 Point Improve IAQ by increasing the outdoor air ventilation to 30% above that required by ASHRAE 62.1-2004. Carrier offers system options, such as energy recovery and outdoor humidity control, that can contribute to meeting this requirement while maintaining energy efficiency. EQ Credit 5 – Indoor Chemical & Pollutant Source Control 1 Point Minimize and control pollutant entry into building systems. Carrier air-handling units can be provided with a MERV (Minimum Efficiency Reporting Value) 13 filter system.
EQ Credit 6.2 – Controllability of Systems: Thermal Comfort 1 Point Provide individual comfort control for 50% of the building’s occupants. Carrier systems that may meet this requirement include VVT systems designed for small zones; underfloor air distribution systems; and individual room terminal units. EQ Credit 7.1 – Thermal Comfort: Design 1 Point Control and maintain humidity as well as temperature and comply with the requirements of ASHRAE 55-2004. Carrier rooftop units and air handlers coupled with Carrier controls can help to meet this requirement. CARRIER COMMERCIAL PRODUCTS AND LEED CERTIFICATION The chart on pages 8 and 9 lists the key components of the major types of HVAC systems and shows how Carrier products can contribute to points required for LEED certification. The achievement of points in any particular credit area depends on the combination of products selected and the specific application of those products. Therefore, no products or programs can claim that their use will guarantee that LEED points will be awarded.
7
Refrigeration Air Handler Terminal Control SystemPackaged Large Rooftop VAV
Carrier Product 35/45 Boxes ComfortLink™/Carrier Comfort Network®
LEED Categories EQ Credit 6.2 EA Credit 5EQ Credit 1EQ Credit 2
Packaged Large Rooftop CV
Carrier Product None ComfortLink/Carrier Comfort Network
LEED Categories NA EA Credit 5EQ Credit 1EQ Credit 2
Packaged Small Rooftop VVT®
Carrier Product 33ZCD 3V™ with ComfortLinkor PremierLink™
LEED Categories EQ Credit 6.2 EA Credit 5EQ Credit 2
Packaged Small Rooftop CV3V with ComfortLink
Carrier Product None or PremierLink/Carrier Comfort Network
LEED Categories EA Credit 5
Indoor Packaged VAV
Carrier Product 35/45 Boxes Carrier Comfort Network
LEED Categories EQ Credit 6.2 EA Credit 5 EQ Credit 1EQ Credit 2
Indoor Packaged CV
Carrier Product None Carrier Comfort Network
LEED Categories NA EA Credit 5 EQ Credit 1 EQ Credit 2
Water Source Heat Pump (Tower Loop)
Carrier Product None Carrier Comfort Network
LEED Categories NA EA Credit 5EQ Credit 1
Water Source Heat Pump (Ground Loop)
Carrier Product None Carrier Comfort NetworkLEED Categories NA EA Credit 5
EQ Credit 1
Split System VAV
Carrier Product 38A 40R or 39M, R 35 / 45 boxes PremierLink/Carrier Comfort Network
LEED Categories EA Credit 1 EA Credit 1 EQ Credit 6.2 EA Credit 5 EQ Credit 1 EQ Credit 1EQ Credit 2 EQ Credit 2EQ Credit 5
EQ Credit 7.1Split System CV
Carrier Product 38A 40R or 39M, R None PremierLink/Carrier Comfort Network
LEED Categories EA Credit 1 EA Credit 1 NA EA Credit 5 EQ Credit 1 EQ Credit 1EQ Credit 2 EQ Credit 2EQ Credit 5
EQ Credit 7.1
48/50HE,HJ,PG,TJ,TM
EA Credit 1 EA Credit 4 (PG only)
EQ Credit 2EQ Credit 5 (PG Only)
EQ Credit 7.1
EQ Credit 1
EA Credit 4
EQ Credit 6.2EQ Credit 7.1
SYSTEM TYPE
EQ Credit 1EQ Credit 2
EA Credit 1
EQ Credit 2
EA Credit 4
48/50HE,HJ,PG,TJ,TM
CARRIER COMMERCIAL PRODUCTS CONTRIBUTE TO LEED ® CERTIFICATION
EA Credit 1
48/50A or Z
EQ Credit 1
EQ Credit 5EQ Credit 7.1
EQ Credit 7.1
50B or 50X
50R, P, H, V
EA Credit 1,
50BR, BV, BY, BZ
EA Credit 1
EQ Credit 7.1
EA Credit 1
EQ Credit 7.1
EQ Credit 6.2
50R, P, H, V
EQ Credit 2
SYSTEM COMPONENTS
48/50A or Z
EQ Credit 2
EQ Credit 5
EA Credit 1
EQ Credit 7.1
EQ Credit 7.1
EQ Credit 2EQ Credit 5 (PG Only)
EA Credit 1 EA Credit 4 (PG only)
EQ Credit 1
8
Refrigeration Air Handler Terminal Control SystemChilled Water VAV
Carrier Product 30RA, 30RB, 30XA (Air-Cooled) 39M,R,S 35 / 45 boxesor
30H (Water-Cooled) 39M,R,S 35 / 45 boxes ComfortLink™/or Carrier Comfort Network®
19XR, XRV/23XRV (Water-Cooled) 39M,R,S 35 / 45 boxes
LEED Categories EA Credit 1 EA Credit 1 EQ Credit 6.2 EA Credit 5 EA Credit 4 EQ Credit 1 EQ Credit 1
EQ Credit 2 EQ Credit 2EQ Credit 5
EQ Credit 7.1Chilled Water CV
Carrier Product 30RA, 30RB, 30XA (Air-Cooled) 39M,R,S 35 / 45 boxesor
30H (Water-Cooled) 39M,R,S 35 / 45 boxes ComfortLink/or Carrier Comfort Network
19XR, XRV/23XRV (Water-Cooled) 39M,R,S 35 / 45 boxes
LEED Categories EA Credit 1 EA Credit 1 EQ Credit 6.2 EA Credit 5 EA Credit 4 EQ Credit 1 EQ Credit 1
EQ Credit 2 EQ Credit 2EQ Credit 5
EQ Credit 7.1Chilled Water Fan Coil
Carrier Product 30RA, 30RB, 30XA (Air-Cooled)or
30H (Water-Cooled) ComfortLink/or Carrier Comfort Network
19XR, XRV/23XRV (Water-Cooled)
LEED Categories EA Credit 1 EA Credit 5EA Credit 4
Chilled Water Unit Ventilator
Carrier Product 30RA, 30RB, 30XA (Air-Cooled)or
30H (Water-Cooled) ComfortLink/or Carrier Comfort Network
19XR, XRV/23XRV (Water-Cooled)
LEED Categories EA Credit 1 EA Credit 5EA Credit 4
Underfloor Air Distribution (UFAD)
Carrier Product 30RA, 30RB, 30XA (Air-Cooled) 39M,R,S 42KC, 45X, 35Bor
30H (Water-Cooled) 39M,R,S 42KC, 45X, 35B ComfortLink/or Carrier Comfort Network
19XR, XRV/23XRV (Water-Cooled) 39M,R,S 42KC, 45X, 35B
LEED Categories EA Credit 1 EA Credit 1 EA Credit 1 EA Credit 5 EA Credit 4 EQ Credit 1 EQ Credit 2 EQ Credit 1
EQ Credit 2 EQ Credit 6.2 EQ Credit 2EQ Credit 5 EQ Credit 7.1
EQ Credit 7.1
Examples of specific product arrangements for highlighted systems are shown on pages 10-15. CV - Constant VolumeEA - Energy & Atmosphere
NOTE: System schematics are provided as examples and for reference purposes only. Please refer to EQ - Indoor Environmental QualityLEED criteria available from the U.S. Green Building Council and to Product Data catalogs for unit NA - Not Applicableperformance data and available options and accessories to help determine if a particular size or VAV - Variable Air Volumeconfiguration of equipment will contribute to LEED certification. VVT - Variable Volume and Temperature
40UV,UH
42C,D,S,V
42C,D,S,V
42C,D,S,V
EA Credit 1
EA Credit 1EQ Credit 2
EQ Credit 7.1
CARRIER COMMERCIAL PRODUCTS CONTRIBUTE TO LEED ® CERTIFICATION (CONT)
SYSTEM TYPE SYSTEM COMPONENTS
EQ Credit 6.2
40UV,UH
40UV,UH
9
SYSTEM SCHEMATICS
Packaged Large Rooftop VAV System
50Z Single-Package Rooftop Unit EA Credit 1 – Optimize Energy Performance • Up to nine steps of cooling capacity control for low
energy consumption during part load operation • Optional unit-mounted variable frequency drive • Economizer with outdoor air hoods, ultra low-leakage
dampers and integrated compressor operation • Premium efficiency fan motors EQ Credit 1 – Outdoor Air Delivery Monitoring • Outdoor air quantity (cfm) control package EQ Credit 2 – Increased Ventilation • Optional economizer damper section with CCN
controls and heat recovery capability EQ Credit 5 – Indoor Chemical & Pollutant Source Control • Filter section with MERV 13 filter EQ Credit 7.1 – Thermal Comfort: Design • Intertwined evaporator coils for full-face active
operation at part-load conditions 35/45 Series VAV Boxes EQ Credit 6.2 – Controllability of Systems: Thermal Comfort • Wide range of sizes provides comfort control in small
zones
Carrier Comfort Network® Control System EA Credit 5 – Measurement & Verification • General purpose controllers, data collection, and trend
logging capability allow for monitoring and analysis of energy performance of all building energy consuming devices
EQ Credit 1 – Outdoor Air Delivery Monitoring • CCN system can precisely control the amount of
outside air • Room-mounted CO2 sensors EQ Credit 2 – Increased Ventilation • Demand control ventilation can significantly reduce
energy needed to condition outdoor air while meeting minimum ventilation requirements
NOTE: These system schematics illustrate how each individual product in a system may contribute to meeting the requirements of a credit. The points available are not determined by the number of products that contribute to the credit but are limited to the total number of points allowed for a particular credit under the LEED® standard.
10
Packaged Small Rooftop VVT System
50PG Centurion Packaged Rooftop Unit EA Credit 1 – Optimize Energy Performance • Efficiencies up to 15.0 SEER and 12.7 EER • Part load performance with IPLV to 13.3 EER • Heat recovery option • Economizer with outdoor air hoods, ultra low leak
dampers and integrated compressor operation • Optimum air path design for reduced static pressure
losses • High-efficiency fan motors EA Credit 4 – Enhanced Refrigerant Management • Chlorine-free Puron® R-410A refrigerant EQ Credit 1 – Outdoor Air Delivery Monitoring • DCV compatible • Heat recovery EQ Credit 2 – Increased Ventilation • Economizer options EQ Credit 5 – Indoor Chemical & Pollutant Source Control • Filter section with MERV 13 filter EQ Credit 7.1 – Thermal Comfort: Design • Dehumidifying capability with optional Humid-MiZer™ adaptive humidity control
33ZCDR 3V VVT Control System EA Credit 5 – Measurement & Verification • General purpose controllers, data collection, and trend
logging capability allow for monitoring and analysis of energy performance of all building energy consuming devices
EQ Credit 2 – Increased Ventilation • Demand control ventilation can significantly reduce
energy needed to condition outdoor air while meeting minimum ventilation requirements
EQ Credit 6.2 – Controllability of Systems: Thermal Comfort • Cost-effective way of providing comfort in small zones
VVT® 3V™ 33ZCDR
50PG
NOTE: These system schematics illustrate how each individual product in a system may contribute to meeting the requirements of a credit. The points available are not determined by the number of products that contribute to the credit but are limited to the total number of points allowed for a particular credit under the LEED® standard.
11
Water Source Heat Pump (Tower Loop) System
50PTH Aquazone™ Water Source Heat Pump EA Credit 1 – Optimize Energy Performance • Part-load efficiencies up to 31.5 EER • Individual zone heating and cooling control without
excess energy consumption • System moves energy from zone with excess heat to
zones requiring heat • Optional factory-installed premium fan motors • Optional factory-installed hot water generator EA Credit 4 – Enhanced Refrigerant Management • Chlorine-free Puron® R-410A refrigerant EQ Credit 6.2 – Controllability of Systems: Thermal Comfort • Wide range of sizes provides comfort control in small
zones EQ Credit 7.1 – Thermal Comfort: Design • Dehumidifying capability with optional Deluxe D
control board • Modulating hot water reheat for part load humidity
control
Carrier Comfort Network® (CCN) Control System EA Credit 5 – Measurement & Verification • General purpose controllers, data collection, and trend
logging capability allow for monitoring and analysis of energy performance of all building energy consuming devices
EQ Credit 1 – Outdoor Air Delivery Monitoring • CCN system can precisely control the amount of
outside air • Room-mounted CO2 sensors
NOTE: These system schematics illustrate how each individual product in a system may contribute to meeting the requirements of a credit. The points available are not determined by the number of products that contribute to the credit but are limited to the total number of points allowed for a particular credit under the LEED® standard.
12
Chilled Water VAV System
23XRV Evergreen™ Variable Speed Screw Chiller EA Credit 1 – Optimize Energy Performance • Full load kW/ton to 0.53 and IPLV to 0.33 kW/ton, low
energy consumption during part and full load operation • Unit-mounted variable frequency drive EA Credit 4 – Enhanced Refrigerant Management • Chlorine-free R-134a refrigerant
39M Aero™ Air Handler EA Credit 1 – Optimize Energy Performance • Optional factory-mounted controls and variable
frequency drives • Optional high-efficiency fan motors EQ Credit 1 – Outdoor Air Delivery Monitoring • Outdoor air monitoring station EQ Credit 2 – Increased Ventilation • Optional economizer damper section with CCN
controls and heat recovery capability EQ Credit 5 – Indoor Chemical & Pollutant Source Control • Filter section with MERV 13 filter EQ Credit 7.1 – Thermal Comfort: Design • Multiple coil options allow matching design
temperature and humidity requirements • Factory-installed humidifiers for precise indoor climate
conditioning
35/45 Series VAV Boxes EQ Credit 6.2 – Controllability of Systems: Thermal Comfort • Wide range of sizes provides comfort control in small
zones Carrier Comfort Network® (CCN) Control System EA Credit 5 – Measurement & Verification • General purpose controllers, data collection, and trend
logging capability allow for monitoring and analysis of energy performance of all building energy consuming devices
EQ Credit 1 – Outdoor Air Delivery Monitoring • CCN system can precisely control the amount of
outside air • Room-mounted CO2 sensors EQ Credit 2 – Increased Ventilation • Demand control ventilation can significantly reduce
energy needed to condition outdoor air while meeting minimum ventilation requirements
NOTE: These system schematics illustrate how each individual product in a system may contribute to meeting the requirements of a credit. The points available are not determined by the number of products that contribute to the credit but are limited to the total number of points allowed for a particular credit under the LEED® standard.
13
Chilled Water Fan Coil System
30RB AquaSnap® Air-Cooled Chiller EA Credit 1 – Optimize Energy Performance • IPLV to 14.2 EER for low energy consumption during
part and full load operation • Multiple scroll compressors and 3600-step electronic
expansion valve provide excellent part load control • AeroAcoustic™ fan system provides quiet fan
operation with low condenser fan horsepower EA Credit 4 – Enhanced Refrigerant Management • Chlorine-free Puron® R-410A refrigerant 42V Room Fan Coil EA Credit 1 – Optimize Energy Performance • Valve and control packages allow matching to room
load conditions without increased energy consumption EQ Credit 6.2 – Controllability of Systems: Thermal Comfort • Wide range of sizes provides comfort control in small
zones
Carrier Comfort Network® (CCN) Control System EA Credit 5 – Measurement & Verification • General purpose controllers, data collection, and trend
logging capability allow for monitoring and analysis of energy performance of all building energy consuming devices
NOTE: These system schematics illustrate how each individual product in a system may contribute to meeting the requirements of a credit. The points available are not determined by the number of products that contribute to the credit but are limited to the total number of points allowed for a particular credit under the LEED® standard.
14
Underfloor Air Distribution (UFAD) System
19XRV Evergreen™ Centrifugal Chiller EA Credit 1 – Optimize Energy Performance • IPLV to 0.35 for low energy consumption during part
and full load operation • Unit-mounted variable frequency drive EA Credit 4 – Enhanced Refrigerant Management • Chlorine-free R-134a refrigerant 39R Aero™ Air Handler EA Credit 1 – Optimize Energy Performance • Optional factory-mounted controls and variable
frequency drives • Optional high-efficiency fan motors EQ Credit 1– Outdoor Air Delivery Monitoring • Optional outdoor air monitoring station EQ Credit 2 – Increased Ventilation • Optional economizer damper section with CCN
controls and heat recovery capability EQ Credit 5 – Indoor Chemical & Pollutant Source Control • Filter section with MERV 13 filter EQ Credit 7.1 – Thermal Comfort: Design • Multiple coil options allow matching design
temperature and humidity requirements • Factory-installed humidifiers for precise indoor climate
conditioning
45X/35B Axis™ Floor Terminal Units EA Credit 1 – Optimize Energy Performance • Higher supply air temperature increases economizer
hours of operation EQ Credit 2 – Increased Ventilation • Higher supply air temperature increases economizer
hours of operation EQ Credit 6.2 – Controllability of Systems: Thermal Comfort • Manually adjustable air volume regulation allows for
individual control EQ Credit 7.1 – Thermal Comfort: Design • Colder supply air temperature to mixing box allows
better humidity control Carrier Comfort Network® (CCN) Control System EA Credit 5 – Measurement & Verification • General purpose controllers, data collection, and trend
logging capability allow for monitoring and analysis of energy performance of all building energy consuming devices
EQ Credit 1 – Outdoor Air Delivery Monitoring • CCN system can precisely control the amount of
outside air • Room-mounted CO2 sensors EQ Credit 2 – Increased Ventilation • Demand control ventilation can significantly reduce
energy needed to condition outdoor air while meeting minimum ventilation requirements
NOTE: These system schematics illustrate how each individual product in a system may contribute to meeting the requirements of a credit. The points available are not determined by the number of products that contribute to the credit but are limited to the total number of points allowed for a particular credit under the LEED® standard.
15