400gsm Artboard+
Gloss Laminated 2 Sides
For sizes smaller than our standard BC size (90x54mm), we charge a trimming fee of $10+GST per 1000 cards per design. However, sizes that are smaller than 30x30mm may require diecutting andthis would incur diecut knife and diecutting fee,
If the artwork contains PMS colours, all the PMS colours will be converted to CMYK setting automatically (unless the print is using PMS ink). Please note that we do not provide colour matching warranty service for CMYK prints, as the prints are processed via gang-up printing.
Please clearly indicate the specific side that is to be gloss/matt laminated or applied with spot UV.
Please note that colours on the matt laminated side may appear duller, or not as bright,due to the matt lamination film tint.
For spot UV finish, all lines/strokes must be at least 0.25mm, otherwise the spot UV effect may not be as clear/sharp. All Spot UV finishes should be kept at least 5mm away from the trimming edges to reduce the chance of “splits” in the spot UV section.
Spot UV finishes are to be saved in a separate file using K100 as the colour setting to indicate the spot UV section(s).
Frosted cards can be printed on one side only. If white ink is required, extra charges apply.
A.Business Cards_Proof_Sample
Back of Card Front of card
+2mm bleed is required each side (94x58mm)
Trimmed/Finished size (90x54mm)
All important text and images should be within the Safety Margins (86x50mm)
1
2
3
4
5
6
7
Business Cards Artwork Specifications
CMY K x 1 side, Spot UV x 1 side.
CMYK x 2 sides, Spot UV x 2 sides.
Spot UV K100 file
Spot UV K100 file Spot UV K100 file
Please use K - 100%for the spot UV area
B.Business Cards_Spot UV_Sample
300gsm Artboard+
Matt Laminated 2 Sides+
Spot UV 2 Sides
300gsm Artboard+
Matt Laminated 2 Sides+
Spot UV 1 Sides
ARTWORK SPECIFICATION
Every foil colour needs a plate/block to be made.
Indicate the different foil colours in your artwork
either by separate layers or different colour
values.
Artwork for foil needs to be created in vector, not
image based (eg. bitmap or jpg).
Foi l artwork kept within 80x44mm
Our standard pricing only applies to loose type fonts and artwork.
It does NOT apply to foil to the edge or large area foiling such as below images.
Keep foiling area 5mm away from the edge.
To extend artwork to the bleed/edges, we can do
this at extra charge as bigger plate needs to be
created as well as more papers will be consumed.
The smallest font size we can foil is
8pt for most fonts.
If we use line stroke as benchmark,
keep it at least 1pt (0.35mm) thick
for metallic foils, and 2pt (0.7mm)
thick for pigment foils. Example
CMYK: 0, 0, 0, 100 - K100 BLACK
Standard business card size 90x54mm
≧8pt
5mm Away from edges
Artwork Set Up
Font Size