Download - brochure_powder_09
Powder colour change possible in less than 5 minutes!
SuperCube plastic booth
M INIMUM SPACE REQUIRED
SUPERFAST
F ULLY AUTOMATIC AND MANUAL
SuperCube
Manual coating stand also available with reversible stop (opening left or right)Each manual coating area has additional illuminationGun holder integrated into the booth wall
The �oor of the booth can be walked on, facilitating cleaning and maintenance workExcellent illumination of the booth and manual coa-ting stands thanks to boothlighting integrated into the roofExtraction of over-spray on both sides throughout the length of the booth. This creates a uniform air speed and good coatingHigh application e�ective-ness due to low booth �oorand vertical air�owNo powder deposits thanks to optimisation of the air �ows in the extraction channels (Twister e�ect)
When planning the powderbooth, the hand coating standsshould also be taken intoaccount. This makes the boothversatile in use.
Manual coating stands possible at either end as an optionThe manual coating stand at the end has a hinged wall, which at the same time is used to shut o� the �ow line opening when changing the colour
The ideal structural shape for powder coating
Compact, with no supportingframes and no pit excavation.Rectangular booth shape –also suited for horizontal gunarrangement. No powder de-posits on the �oor – super fastbooth cleaning. Economicaluse of material. SuperCubecombines these bene�ts, and:
The option of pre- and aftercoating standsBlow-out device for theintegral booth �oor. This keeps the �oor clean and blows the powder into the extraction slot
Whether fully automatic powder coating, or combined with pre- and/or after coating, SuperCube provides all the options.The optimal physics of the plastic sandwich construction ensuresminimal powder adhesion to the walls and supports the bestpowder application onto the work piece.
Manual coating stands eliminate the need for an additional manual booth
Plastic booth
Electrode (-)
Work piece
Ground
Passivating electrode e�ect due to the sandwich construction
Fixed integral booth �oor with blow-out device
From black to white in 4-5 minutes with 2 personnel – depending on equipment!
Blower strip
Suction ductSuction duct
Everything compact – the quickest cleaning times
Optimises the production run by avoiding gradients and minimising work-piece spacingSpace-saving pipe installa-tion for powder recovery
Less space required with higher performance and �exi-bility. The new SuperCubeachieves the best utilisation of space so far in the �eld ofplastic booths. The result is agreater production capacity on a smaller area, and with ita distinctly higher return oninvestment.
Compact construction:No pit requiredBottom edge of work piece from 900 mm Integral conveyor guard panels prevent contamina-tion of the conveyor and allow short hook lengthsLow conveyor level
The minimum becomes the maximum
Key1 Very good booth illumination2 To the after-�lter3 Cyclone4 Powder recovery5 Self-cleaning suction system6 Control cabinet7 Reversible working direction
8 External manual coating stand9 Parking location for manual gun10 Powder spray guns and blow-out
device11 Reciprocator12 Powder centre
32
1
4
5
7
6
98
10
11
12
SuperCube plastic booth
Key1 Fixed �oor with blow-out device2 External manual coating stand
3 Extraction for the cyclone4 Automatic reciprocators with
automatic powder guns
5 Powder centre6 Control cabinet7 Click-clack door (optional)
6
3
4
5
1
7
4
22
7
Note:In practice, reciprocators are made safe with a barrier.
SuperCube – the fastest colour change times – the shortest belt stoppage times
Modular construction of the peripheral systemsThe Wagner plastic boothsallow all current system com-ponents to be combined. Allcomponents are replaceableand can be integrated 100 %into the Wagner module con-cept.
�oor manual coaters gun slots
SuperCube (2,500 mm)
outside inside
or and/or and/or or
belt �xed before after before after 1 2 3 4 5 6
The practical powder supply for multi-colour operation
Powder circulation operation2 vibration tables for light/dark operation, optionalSimple operation through a control panelOption of integral powder extraction,4,000 m 3/h air�owAutomatic fresh powder dosing with level monitoring
Complementary system components for the powder circuit■ Mono cyclone■ After-�lter systems■ Sieving machines■ Powder centres■ Cleaning accessories
Complementary system components for the powder application■ Control cabinets■ Automatic XL powder guns■ Manual powder units■ Movement technology■ Sensing and recording systems
Optimising productionThe decision on which booth is ideal for which requirement depends of course on thevarious individual requirements and processes. Thanks to the high level of �exibility andvariability of the Wagner systems, it is possible to adapt them to suit all customer require-ments.
SuperCube plastic booth
Air extraction rate 12,000 m 3/h - 20,000 m 3/h
Work piece widths 600 mm, 800 mm, 1,000 mm
Work piece heights 1,400 mm - 2,200 mm
Bottom edge of work piece from 900 mm
Internal length 2,500 mm
Manual coating Before, after, before+after
Automatic slots 1-3 per side
Mono cyclone and after-�lter 12,000 - 20,000 m3/h
Technical data
Carrera 50 FF No. 7 Sur - 13 PBX: 444 [email protected] Medellín - Colombia
ww
w.a
irep
.com
.co
Agro & Industrial Representations
The super fast colour-changing concept