Download - BJ Bearings February Issue
Kincrome Measuring Wheel 300mm (12”)• Collapsible Shaft: Folds in
half from 1120mm to 600mm• Measures up to 10,000m• 10cm Increments
• Zero Reset Button• Comfortable rubber pistol
handle with remote counter reset • Button & brake functionK11211
$129ON SALE NOW UNTIL THE END OF APRIL 2015.
WHILE STOCK LAST.
125mm, Angle Grinder• Anti-vibration handle• Slide switch angle grinder
with carry case • 1200WG13SW(H6)
$1940
P17P Petrol Compressor• Free Air Delivery @ 100PSI: 350LPM• 2 cylinder, slow revving, cast iron pump• Warranty: 5yr pump, 3yr Honda• 6.5HP Honda engine• Pump RPM: 1061• 68 litre air receiver• Max PSI: 14500128
BONUS
20M Air HoseWith every Belt Driven Compressor!00348
$1940
Visit our site to join our club and get access to special offers, advanced notice of new products... www.bjbearings.com.au
New Entry Level Domestic Cleaner• Powerful 2400 Psi• 8.3 l/m water flow• Powerease 5hp Vertical
OHV petrol engine• Italian Pump• Folds for easy storage,
ready to use120 BEVR2455-R
$499NEW!
$199
CATEGORY TITLE2
Large Imperial S/Steel Pin Kit - 144 PieceContents:• 50Pce 1/8” x 2”• 30Pce 5/32” x 2½”• 20Pce 3/16” x 3”• 20Pce 1/4” x 2”• 16Pce 1/4” x 3”• 8Pce 5/16 x 2½”HP101SS
Part No Description Pieces Price
HP103 Large Imperial Split Pin 144 $18.00HP104 Imperial Internal/External Circlips 300 $15.00 HP105 External Inch. Circlip Kit 300 $15.00HP106 Metric Internal/External Circlips 300 $15.00HP109 Imperial E-Clip 300 $15.00HP110 Metric E-Clip 300 $9.00HP114 Imperial O-Ring 225 $15.00HP116 R-Clip Kit 150 $15.00HP117 Imperial Roll Pin 315 $22.00HP118 Metric Roll Pin 315 $22.00
Part No Description Pieces Price
HP120 Imperial Grub Screw 240 $17.00HP124 Extention & Compression Springs 200 $13.00HP125 Metric Copper Washer 220 $38.00HP126 Metric Grub Screw 240 $17.00HP128 Clevis Pin 60 $17.00HP135 Imperial Socket Head Screws 120 $17.00HP136 Metric O-Ring 225 $17.00HP139 Auto Blade Fuse & Tester 92 $17.00HP144 Shrinkable Tube 127 $10.00
Part No Description Pieces Price
HP146 Hose Clamp Kit 29 $13.00HP153 Aluminum Rivet Kit 500 $13.00HP171 Metric Socket Screw Kit 120 $17.00HP172 Imperial Grease Nipple 100 $29.00HP173 Metric Woodruff Keys Kit 110 $17.00HP174 Metric Grease Nipple Kit 100 $29.00HP175 Metric Parallel Key 60 $15.00HP176 Metric Fibre Washer Kit 600 $29.00HP177 Rubber Grommets O&C 125 $17.00HP178 Parallel Machine Key 60 $15.00HP179 Dowty Sealing Washer 90 $25.00HP188 Home Handy Assortment 508 $15.00
ALSO AVAILABLE
$15
$38
$15
Imperial Split Pin Kit - 555 PieceContents:• 150Pce 1/16” x 1”• 150Pce 3/32” x 1”• 150Pce 3/32” x 1½”• 100Pce 1/8” x 1¼”• 75Pce 1/8” x 2”• 30Pce 5/32 x 2½”HP101
Star & Spring Washers Kit - 720 PieceLocking Washer:50Pce #6 50Pce #8 50Pce #1040Pce 1/4” 30Pce 5/16” 20Pce 3/8”
Internal/External:50Pce #6 50Pce #8 50Pce #1040Pce 1/4” 30Pce 5/16” 20Pce 3/8”
HP112
Lynch Assotment Kit - 50 PieceContents:• 16Pce 3/16 x 17/16”• 6Pce 5/16 x 1¾”• 18Pce 1/4 x 1¾”• 10Pce 7/16” x 1¾”HP185
$22
ASSORTMENT KITS2
Gasket Removal Kit• Assorted 2” Conditioning discs• 25000 RPM• ¼” Right angle
die grinderARX-114HRK
1/2” Impact Gun Kit• 650 Ft/Lbs (880Nm)• Assorted Metric &
Imperial SocketsARX-650K
$275
3/4” Impact Gun Kit• 725Ft/Lbs
(980Nm)• Assorted Metric
Impact SocketsARX-27AK
3 Piece Irwin Snips SetStraight, Left and Right SnipsARX-AV3SNIPS
• 1.5mm to 10mm• 1.5mm is 90mm
long and 10mm is 175mm long
ARX-66099
• 1/16” to 3/8”• 1/16” is 90mm
long and 3/8” 175mm long
ARX-66199
Extra-long B/end Allen Keys Metric & Imperial
$1950
$148
$1950
$395
$69
3/16” Aluminium Riveter Kit• 4 Nose tips • 3/32, 1/8, 5/32
& 3/16)ARX-200NK
$148
TOOLS & ACCESSORIES 3
$88
$148
$98
$12From
3/8” Reversible Angle Head Drill1650RPMARX-510H
3/8” Reversible Drill1800RPMARX-212
BAHCO 3 Piece Adjustable Wrench Set6” 8” & 10”ADJUST3
3 Leg PullersDurable & affordable pullers:
3” ARX-3MP3 $12.004” ARX-3MP4 $16.006” ARX-3MP6 $19.808” ARX-3MP8 $45.00
4
Nut Splitter• Splitting of
Seized Bolts and/or Over Tightened Bolts without Damaging the Thread
• Chrome Molybdenum Steel Blades with Forged High Carbon Steel Grips
• Hardened, Tempered & Chrome Plated for Rust Resistance
9-12mm SP31211 $1412-16mm SP31212 $1716-22mm SP31213 $2122-27mm SP31214 $25
$14From
12pt Socket Sets• Chrome vanadium steel for high durability• Flat drive technology to maximize grip
23pc 1/4”Dr (4-13mm) 3/16-1/2” SP20100 $6932pc 3/8”Dr (6-22mm) 1/4-7/8” SP20200 $9941pc 1/2”Dr (10-32mm) 3/8 - 1-1/4” SP20300 $179
$69From
3hp Triple Cast Iron Compressors
• Steel valve plate with stainless steel valves• Triple cylinder compressor pump
with cast iron crankshaft and cylinder• Overload protection of electric
motor with thermal relay• On/off pressure switch
• Filter/Regulator• 309 L/min FAD
• 240V/15amp• Drain cock
www.sptools.com
$110060L
$1389100L
134 Piece Metric/SAE Concept Series Tool Kit• ROE combination spanners• 1/4”, 3/8” & 1/2”Dr sockets
& accessories• Combination pliers & diagonal cutters• 7 drawer tool box• Hammer, hex keys, adjustable wrench• Screwdrivers, wobble extension barsBlack SP50097 $799Red/Black SP50192 $799Orange/Black SP50197 $799
286 Piece Metric/SAE Custom Series Tool Kit
• All sockets, socket accessories & ROE spanner
come in hi-density foam storage system
• Maxi drawers featuring 405mm depth
• ROE & flare spanners• 1/4", 3/8" and 1/2"
dr sockets & accessories• Screwdrivers
• Pliers & cutters• Hex & TORX keys
• Adjustable wrenches• Hammer, hacksaw & tape measure, punch & chisel set
• 6x tool storage trays• 8 drawer steel box
• 7 drawer steel roller cabinet
SP50105
3.2hp Inverter Generator• Max 2000W, rated 1600W• From 52dB(A)• 4.1Lt tank capacity• Pull start• Parallel connection
capable• Parallel connection
cable included• Meets EPA &
CARP standardsTI2000
5 Drawer Custom Roller Cabinet• Size (680w x 460d x 812h)• Full drawer extension capabilities• Internal locking system for extra
security• Heavy duty 28 ball bearing
drawer slides• Robust wall construction• Double powder coating resists
scratchingSP40111
Mini Infared Thermometer• LCD display with
backlight• Single dot laser• Targeting• Low battery
Indication• Auto power offSP62022
Bearing PackerSelf Contained Bearing Packer Saves time & Can Be Used Anywhere No Air Line or Grease Gun Required• Packs 50 to 60 Bearings
Without Refilling• Transparent, impact
resistant cup allows grease level check
• Works on Bearings up to 90mm (3-½") O.DSP30888
$57 $89
Industrial Angle Grinders
• 12,000rpm, 566L/min max air con.
100mm SP-1254 125mm SP-1257
$385
Digital Calipers• Graduation 0.01mm/0.005”
• Stainless Hardened • power On/Off
• Meets or Exceeds DIN862 Standard
150mm SP35631 $79300mm SP35633 $149
$1995
$998
$499
1300W Electric pressure washerwith compressorSPW112
BONUS
ea
$79From
$799ea
XRS1800
XRS18
INDUSTRIAL TOOLS & EQUIPMENT4
FILTRATION
Clean Oil Vital to Engine PerformanceImproved high-performance engines and new emission standards have had a significant impact on the development of oils and oil filters. As manufacturers continue to develop more sophisticated engines, new classifications of oils will continue to be developed.
These new oils play a vital part in protecting engines by reducing friction and wear, cooling engine parts, sealing combustion chambers, cleaning engine components and inhibiting corrosion. Lube filters also play a critical role in protecting engines by removing damaging contaminants from the oil.
Lube filters trap oil contaminants in two ways:
• Some particles adhere to the filter media as the oil flows through the filter. These particles attach themselves to the media surface without plugging the media pores.
• Other particles are trapped in the filter media by the pressure of the oil as it flows through the filter.
The Baldwin DesignBaldwin Filters’ High Velocity Dual-Flow line includes dual-flow lube filters to be used on Cummins ISM, ISX and Series 600 engines as replacements for the Fleetguard Venturi™ filter line.
There are differences between standard dual-flow lube spin-on filters and the High Velocity Dual-Flow filters.
High Velocity Dual-Flow spin-ons have one inlet and one outlet. Oil flowing through the filter is sent directly to the engine to protect vital engine components, rather than a portion being returned to the sump as with conventional dual-flow filters.
The High Velocity Dual-Flow spin-on design is also superior to standard full-flow/by-pass designs in that a larger portion of the flow travels through the high efficiency element, removing more small contaminants. In traditional full-flow/by-pass designs, only a small percentage of flow, 10% or less, travels through the high efficiency element.
High Velocity Dual-Flow®
Baldwin Filters’ High Velocity Dual-Flow lube filters provide improved engine protection during extended oil drain intervals, high idle time and harsh operating conditions. The patented design of the High Velocity Dual-Flow filters provides maximum filtration, while the heavy-duty construction ensures dependable operation.
FILTRATION.
Full-flow, Lube Spin On Filterto suit Ford Falcon (1966 ~ 2002) B2
Dual Flow Lube Spin Onto suit Cummins Engines BD103
High Efficiency Lube Spin On to suit Catepillar Engines B7299
Outer Air Elementto suit John Deere, Allis Chalmers, Bobcat PA1667-FN
$495 $3870 $2790 $1750
Dual Flow Lube Spin Onto suit Cummins EnginesBD103
5
6
Wall mount Professional CleanerThe ideal workshop unit…• 2175 Max pressure • – 9 l/m Max Flow• Compact design• Made in Italy by Comet• Optional wall mount hose reel
available – ask your store today• Supplied ready to workK250 9/120 Static
$1999NEW!
Tradies 4000 psi Petrol Cleaner• Genuine Honda GX390
engine• Comet ZWD plunger
pump with external unloader
• Supplied ready to work with 15m hose/gun/lance kit
• Detergent injection as standard
• Cleans the toughest jobs!
BAR4013-H
$2399
Honda Domestic Petrol Cleaner• Two wheel scoop frame
for easy movement• Ready to work with
gun/lance/hose kit • Honda GC OHV
Petrol Engine• 2500 Psi @ 9.5 l/m
flow• Comet Italian
pumpBAR2550B-H $899
PRESSURE CLEANERS
Home 240V Electric Cleaner• Max Pressure 2175 psi• Max flow 8 l/m• 1.6 kW 240V 10amp motor• Made in Italy By Comet• Comes with Turbo Nozzle,
Low pressure det inj• Hose caddy & 8m hose KL1600A EXTRA
$899
$1799
Budget 4000 psi Petrol Cleaner• Powerful 4000 psi
@ 15 l/m• Powerease 15hp
Petrol engine• Comet ZWD plunger pump• 15m hose c/w quick connects• Gun/Lance/Quick change nozzles• Ideal for the serious DIY user BAR4015-R
Great around the home!Great around the
home or workshop!
Semi Professional 240V 10amp Pressure Cleaner• Max pressure 2300 psi• Max flow 10 l/m• 2.2 kW 240V 10amp motor• Made in Italy by Comet• 12m Hose c/w reel• Easy storage of all
accessories suppliedKT1800 EXTRA
Semi professional 240v 15amp Hot Water Pressure Cleaner• Hot water to Max 90°C• Max 2175 PSI @ 9 l/m• 240V 15amp• 2800 rpm Comet
Italian Pump• Brass headSCOUT 150 EXTRA
Ideal DIY hot water pressure cleaner!
$2599
$25
Air Comp Hose Kit 10m Yellow Air Comp hose kit 10mCOA 42.0000.25 JRP1017 10m
$499
12V 56L Spot Sprayers• 4.5m Spray hose• 12v DC pump made in USA• 450mm spray gun
comes with adjustable nozzle
• Drain plug in tank125 90.700.150
$299
Honda Domestic Petrol Cleaner• Honda OHV Petrol Engine• 2400 Psi @ 9 l/m flow• Italian Pump• Supplied c/w hose
gun/lance Assy• Folds for easy storage
– ready to useBEVR2455-HWX
Professional 240V 10amp Pressure Cleaner• Max pressure 1600 psi• Max flow 9 l/m• Industrial quality guns/lances• Brass head plunger pump by
Comet Italy• Auto stop protection• 15m hose and reelK250 9/120 EXTRA
New Entry Level Domestic Cleaner• Powerful 2400 Psi• 8.3 l/m water flow • Powerease 5hp Vertical OHV
petrol engine• Italian Pump• Folds for easy storage
– ready to useBEVR2455-R
$1849
$729
NEW!
Free Turbo
Great around the factory or
workshop!
NEW!
5 Piece Air Comp Kit 5 Piece air tool kit, comes with:• Air paint gun• Tyre inflator• Air blower gun• Air wash gunCOA 42.0090.21 JAT-01
Mobile Engine Drive Air Compressor• 623 FAD / 22 CFM• Genuine Honda GX200
engine• Heavy Duty Cast iron/
slow revving pump• Pressure tanks rated to
10bar – built to AS1210-2010
• 70liter tankCOM P7065-H
$499
$1499
1½ Fire Pump - 7hp Engine • 330 l/m max flow• 55m max head / 7m
suction lift• 7hp Powerease OHV
petrol engine• 1½ Suction / 2 x 1 inch &
1 x 1½ discharge• Supplied in roll frameHP15701-R
Fire Pump Hose Kit for 1½ Pump
• Don’t get caught this summer• 1 x 5m 1½ Grey suction
hose with strainer• 1 x 10m ¾ yellow fire hose
c/w 25mm red fire nozzle• Extra yellow discharge hose
available – ask your store today125 50.100.115
$113
$399
$45
7PRESSURE CLEANERS & FIRE PUMP
8 DRILLING & PAINT
Rust Not• 400 gram Aerosol• Single Pack High Quality Epoxy Enamel
for Interior and Exterior Applications.• Suitable for Metal, Timber, Concrete.• No Primer required for new or lightly
rusted surfaces.White RNW400Black RNB400Satin Black RNSB400Silver RNS400Golden Yellow RNY14400Brunswick Green RNG12400Indian Red RNR64400Signal Red RNR13400Saphire Blue RNB14400Harbour Blue RNB24400Pewter RNN63400
Comfort Grip• High performance Comfort Grip
turns an Aerosol can into a spray gun feel.
• Makes Spray painting fast and efficient.
• Ergonomic quality plastic design provides maximum control when using.
• Finish your job faster and easier.RO241526
Premium quality fully ground M2 HSS Jobber Drill Sets. General purpose drills for use in a wide variety of materials including ferrous and non-ferrous metals, timber and plastic.• Bright finish• 118º split point
M2 HSS Jobber Metric & Imperial Drill Sets.
25 Piece Metric Set1.0 – 13.0 X
0.5mm Rises 2007-M3
$62 $135$28
13 Piece Imperial Set1/16” – 1/4” X
1/64” Rises 2006-F1
21 Piece Imperial Set1/16” – 3/8” X
1/64” Rises 2006-F2
29 Piece Imperial Set1/16” – 1/2” x
1/64” Rises 2006-F3
19 Piece Metric Set1.0 – 10.0 X
0.5mm Rises 2007-M2
12 Piece Metric Set
1.0 – 6.5 X 0.5mm Rises
2007-M1
$125 $62 $28
$28From
Black Gal• 400 gram Aerosol• Anti-Corrosive high quality
Black Zinc Paint. • High Zinc solids protection
with Black finish. • Ideal for touch up coating
for weld areas of steel and galvanised surfaces and Black iron, anodised surfaces.
• Silva Gal also availableBlack BGAL400Silva SGAL400
Super Etch Primer Grey
• 400 gram Aerosol• One Pack Epoxy
Etch Primer with excellent adhesion and anti-corrosion
properties.• For use over Non-
Ferrous materials EP400
Cold Gal• 400 gram
Aerosol• High Quality
Zinc Rich single pack Epoxy
coating for long term protection.
• Replaces corroded or
damaged galvanising
CG 400
$1290$12
Hammercoat• 400 gram Aerosol• Extremely tough & durable
Quick Drying spray finish for camouflaging slightly imperfect surfaces and as a decorative or effects finish.
Silver Grey HCSG400Charcoal HCC400Blue HCB400Dark Blue HCDB400Green HCG400Red HCR400Gold HCGO400Black HCBLK400
$12ea
$1280
$1320ea
$990ea
3 Piece 18V Slide Combination Pack:• DV18DSDL impact
(hammer) driver drill• WH18DSDL impact driver• G18DSL 125mm angle grinder • 2 x 5.0Ah slide Li-ion batteries• Cooling charger• Large site bagKC18DGDL(HJ)
41 Piece Bit & Impact Socket Set
797500
Pedestal Drill Press• 750W (1hp)• 16mm keyed• 210-2580rpm• Laser guide• Belt DriveB16RM
Metal Cut-Off Saw • Including 6 cut-off wheels• 2400W• 14” (355mm)CC14SF-6W
Reciprocating Saw with Tool-Less Blade Change• 1010W• Dust & water resistant • Variable speedCR13V
690W Impact Drill• 13mm keyless• Variable speed• 18mm
concrete capacity
DV18V
125mm Angle Grinder• Anti-vibration handle• Slide switch angle grinder
with carry case • 1200WG13SW(H6)
$749
$660$4990
$359
$199
25mm Die Grinder• 760W• Soft start• Variable speedGP3V(H1)
$369
3.6V Pencil Driver Drill• 6.35mm hex drive• 2 x 1.5Ah Li-ion batteries DB3DL2(HL)
$169
$279
$219
2 Piece 18V Slide Combination Pack:
• DV18DSDL impact (hammer) driver drill
• WH18DSDL impact driver• 2 x 5.0Ah slide Li-ion
batteries• Cooling charger
• Twin tool carry caseKC18DML(HJ)
$599
POWER TOOLS 9
Machine (Drill Press) Vice, Super Grade – 100mm• Accurately machined slide• Corrosion resistant screw and forged handle• Case hardened, replaceable, ‘V’ notched jaws• Vice Jaw Width: 100mm Jaw Height: 37mm,
Max Jaw Opening: 120mm, • Bed Width: 190mm Height: 82mm,
Overall Height: 82mm• ACME thread screw• Weight: 11.6kg60220
$260
3 Pce Dominator Pry Bar Set• All new steel capped end with composite
ergonomically designed handle designed to allow the user to strike the pry bar with a hammer without damaging the head.
• Made from the highest quality alloy and carbon steel, hardened and tempered the full length of the bar,
• Curved blade for extra leverage with corrosion resistant finish
61355 ( 3 piece set: 40140, 40144, 40146 )
$149
Power Bite Heavy Duty Concrete Mesh & Bolt Cutter• Specially designed DAWN Concrete Mesh & Bolt
Cutter has the cutting jaws open on the side of the very flat head, giving better access to cut concrete mesh.
• High quality, heavy duty and durable bolt cutters with induction hardened cutting edges
• Quick, clean cuts for materials that are too tough for standard bolt cutters
• Double cam precision bolt blade adjustment if required
$169 $179Part No Dominator Body Size O.A. Length Weight
40140 7C 10 mm 305 mm 27.50 Kg 40144 12C 10 mm 432 mm 35.00 Kg 40146 18C 13 mm 635 mm 42.00 Kg
Part No. 52790 52900
Length 790 mm 900 mm
HRC 19 9 mm 11 mm
HRC40 8 mm 9 mm
Cutting capacity for material hardness
52790 52900
11kVA Honda Powered Petrol Generator• 11kVA single phase 2 x 15A
outlets • Honda GX630 V Twin engine with
electric start • Long range 27L fuel tank • Popular choice for farmers and
buildersEP11000HSRE
$3999
7kVA Honda Powered Petrol Generator• 7kVA single phase 2 x 15A outlets • Honda GX390 engine with recoil start • Less than 6% harmonic distortion • Popular choice for buildersEP7000HSR
$1699
3.4kVA Honda Powered Petrol Generator• 3.4kVA single phase 2 x 15A outlets • Honda GX200 engine with recoil start • Lightweight, quiet, smooth running• Ideal for small power tools.• 3.6Lt fuel tank EP3400HSR
$990
$549
2.4kVA Honda Powered Petrol Generator• Less than 6% harmonic distortion • Ideal for small appliances and
small hand tools• Lightweight and portable • 2 x 15 Amp outlets EP2400HCR
Water Master 1.5” Honda Powered High Pressure Fire Fighting Pump• Honda GX160 engine• 1” (x2), 1.5” (x1) discharge size • Max. head 74.5m • Max. flow rate 390L/min • Sturdy roll over frameMH15SHP
$1899
2.4kVA Yamaha Inverter Petrol Generator• Will run all
electronic equipment • Perfect for camping,
caravanning & other recreational activities
• 4 year factory warranty
• Extremely quiet • Pure sine wave
EF2400iS
$699
10 GENERATORS, VICE & BOLT CUTTERS
00299
135 piece 6 drawer• 1/4 & 1/2"" Metric & Imperial
Sockets & Accessories• Mirror Polish Imperial & Metric
Combination Spanners,• Soft Grip Pliers, TorqueMaster
Screwdrivers & moreK1604
11INDUSTRIAL TOOLS & EQUIPMENT
Evolve Tool Kits
2 in 1 Magnetic Light & Pick Up Tool • 3 x Bright White LED’s: 18 Lumen /1 LED• Telescopic Length: 175 - 550mm • Flexible Head• 4.1kg of magnetic adhesion
at the base. 2.3kg at the headK8062
$1795
Wrecking Bars• Heat Treated Carbon Steel with Polished Ends • Claw and Chisel End for Lifting and Prying
300mm (12") K9130 $13.95450mm (18") K9145 $18.95600mm (24") K9160 $28.95900mm (36") K9190 $38.95
$1395From
Magnetic Drain Plug Set 15 Pce• 6 x 3/8" Dr Bit Socket Hex: 8 -17
$9995
• 2 x 3/8" Dr Impact Bit Socket Sq: 8 -10
• 6 x 3/8" Dr Socket 13 - 21mm
• 1 x 3/8" Dr Impact Bit Socket Torx: T45
K8157
Tool Trolley 5 Drawer• Ball bearing slides• Aluminium drawer
grips• Reinforced steel
frame• 672mm x 466mm
x 801mm• Weight: 41.5KgK7625
$419
Contour 3 Tier Tool Cart• Size: 755mm x 476mm x 950mm• Ideal for transporting & Storing Tools,
Spare parts, Tool boxes, and more• Suits Contour Chests, Blue Steel Chests,
Evolve Chests and most standard tool chests
K7743
$229
Cargo Case 900mm• External: L 900 x W 470 x H 370mm• Internal: L 820 x W 440 x H 295mm • Will not rust or dent
$249• Steel Kincrome
embossed hasp & Staple (lockable)
• Steel carry handles & hinge
• Resists dust, chemicals & oil
• Weight: 11Kg K7190
Black Chrome Single Way Gear Spanner Set 7Pce Metric • Sizes: 8, 10, 12, 13, 14,
17, 19mmP3100
$89
Measuring Wheels
$129
$115
Fibreglass Tape Reel 50m• 13mm Fibreglass Tape• Double Sided Tape: • Imperial & Metric• High Impact ABS Case• 3x Rapid Rewind K11201
$3995
114 piece Metric only• 1/4”, 3/8”, 1/2” Drive Metric
Sockets & Accessories • Mirror Polish Metric Combination
Spanners• Soft Grip Pliers, Torquemaster
Screwdrivers & more K1606
Extra Long Double Ring Metric Spanner Set• Flex head with
reversible gear• 7 PieceK3077
$279
$799
$999
K11210
K11211
150mm (6")• Zero Point Indicator• 3 Way collapsible from
1m - 42cm• Measures up to 10,000m• Carry Bag included • Zero Reset Button
300mm (12”)• Collapsible Shaft: Folds
in half from 1120mm to 600mm
• Measures up to 10,000m• 10cm Increments • Zero Reset Button• Comfortable rubber
pistol handle with remote counter reset
• Button & brake function
12
Fluorolok Tape Measure • Extended tape mouth, Hi-Viz case• Yellow blade graduated in mm on
both edges• Bright coloured case that stands
out in the tool box
BONUS
By Redemption
TOOLS LATCHES & LASER LEVELLING
Adjustable Over Centre Latch• Adjustable large Over Centre Latch.
Zinc plated • Many applications including trucks,
bonnets, tradesman vehicles, toolboxes & outdoor metal cabinets.
OL414ZP
$490
Flexible Draw Latch • EPDM rubber large draw latch• Dimensions: 130.0mm x 79.4mm• Many applications including trucks,
bonnets, tradesman vehicles, toolboxes
37-10-131-10 $22
Compression Latch• Compression Trigger Latch
110mm x 50mm. Grip 14-29mm• Stylish, high quality original
Southco part. Suitable for many applications including toolboxes, tradesman vehicles, trailers.
C5-31-25
Positive Lock Pin• ½” diameter;
3” effective length• Many applications
requiring quick release for easy fastening including trucks; tradesman vehicles; motor homes
PL8-3000
$39
$46
Auto Levelling Dot & Line Laser• Switch between Lines or Dots• Levelling, Alignment and Plumb• Includes Magnetic Base• Also includes Laser Target & Glasses
Laser Distance Measure• 40m indoor range• Area and Volume
Calculation• Indirect Height• Min Max
Measurement• Carry case
LI-40
Electronic Levelling Rotating Laser package• Electronic Auto Levelling• Also includes Ni-mh rechargeable batteries• Horizontal Rotation for Levelling• Vibration and TILT settings• Includes LR715 electronic receiver
• Hard Shell Carry CaseEL614P
$299
40pce Ratcheting Tap & Die Set Metric• Ratcheting drive tool
with reversible action• Auto locking feature
allows for safe removal of tap adapter works on round and hex shaped dies
40pce, Metric 3886 $7940pce, SAE 3885 $7975pce, Metric/SAE 3887 $149
$79From
Auto Levelling Rotating Laser Package• Includes LR710 electronic receiver• Horizontal Rotation for Levelling• Vertical Rotation for Alignment• Package include Heavy
Duty Tripod and 2.4m Staff• Auto LevellingAUTO1P
$399• Auto Levelling• Hard Shell
Carry CaseDLD3
$999
Indexing Extendable Pry Bar• 14 Locking Head Positions for Unmatched Access• Grooved Head Profile Provides Additional Traction• Head Indexible Through 180°
for Greater Leverage18”- 29” 82220 $59.00 29”- 48” 82248 $139.00 $59
From8m 100192 $22.008m/26’ x 25mm FL48ME10 $22.00
$176
12 Pce Open Ended Ratcheting
Wrench Set• Allows ratcheting of
nuts and bolts without removing wrench from
fastener• Ratcheting speed with
the access of an open end wrench 5° Swing Arc
85597 $22ea
ADHESIVES
Loctite 620Recommended for high temperature retaining of parts with a clearance or interference fit, e.g. retaining bushes, bearings, seals, fans and liners.
10ml 62015 $14.5050ml 62050 $37.00250ml 62070 $159.00
Loctite 648 - 50ml
A retaining compound recommended for
continuous working temperatures up to
180 degrees. Fills gaps up to 0.006 in
diametral clearance. Fixtures in 10 minutes
45431
$37
Loctite 635 Recommended for high
strength retaining of parts with a clearance
or interference fit, e.g. retaining bushes,
bearings, seals, fans and liners
50ml 63531 $38.50250ml 63541 $159.00
Loctite 680 Gives best resistance to dynamic, axial and radial loads. Recommended for retaining shafts, gears, pulleys, and similar cylindrical parts. Approvals: Plumbing Safety Licence: 4020:2002 Cert No. 8687 (Potable Water)
50ml 1878433 $34.50 250ml 1878498 $145.00
Loctite 609Recommended as a general purpose, low viscosity retaining compound. Use to bond rotors to shafts, secure bushings and sleeves and augment press fits.
10ml 30013 $11.0050ml 30015 $34.50250ml 30014 $145.00
$3850From
$3450From
$11From
$1450From
Loctite 641A controlled strength retaining compound ideal for cylindrical parts that require disassembly; e.g. retention of bearings onto shafts & into housings.
10ml 21314 $12.00 50ml 45079 $37.00 250ml 45081 $145.00
$12From
Loctite 660 Used for repairing work coaxial parts without re-machining. Enables reuse of work bearing seats, keys, splines, tapers, or for retaining shirns.
6ml 66010 $8.0050ml 66040 $43.50
$8From
Loctite 232 - 250mlHas lubricating properties to faciliate smooth assembly of heavy interference or high torque fits. Prevents galling and metal pick-up during assembly. 44324
$185
13
14 CLEANING, BRUSHES & GAS TORCHESScrubber Hand Cleaner• Removes grease, diesel, oil, tar,
adhesives in a flash• Contains fine Italian pumice• Contains lanolin• Aussie Made & Owned
Orange Pumice Hand Cleaner• Pure citrus base• Contains fine Italian pumice• Ideal to remove grease, oil,
adhesives, paints in a flash• Aussie Made & Owned
4kg Scrubber 390I $2520kg Scrubber 390J $99
500ml Orange Pumice 899c $6.504L Orange Pumice 899i $3520L Orange Pumice 899J $105$650
From
$25From
Euca Laundry Powder• Commercial quality ideal
for work and hi vis clothes• Ideal in top, front loading
machines, hot or cold wash• No fillers, synthetic
perfumes or petrochemical surfactants
• Excellent cost per wash106VFFT
$55
Josco Premium Cup Brushes• Twist knot steel
wire ideal for hard aggressive brushing and contaminant removal
• Great for scale, rust and paint removal
Josco Carbide BurrsPrecision cut & ideal for cutting stainless and carbon steel or other hard metalsJBS4
Brushwork Hearth BrushJava filled, heat resistant & ideal for brushing away hot embers and sparks711010
Superboss BroomHeavy duty broom with plastic back and java fill602124
$4990
$650$95
75mm 30g 166BMCARD $25.0075mm 26g 166MCARD $25.00
$25ea
Gas Power Torch w/ bonus Pocket Torch• Auto Ignition• Refillable with Butane Gas• Adjustable Flame• Torch Temp 1300CPB6050B
Micro Gas Torch• Auto Ignition• Refillable with
Butane Gas• Extended Burner Head• Safety Lock• Includes bonus 20ml
Butane Gas Refill Cartridge
HD3100
Map/Pro Torch Kit with Pistol Grip Head• Auto Ignition• Stainless Steel
Burner Tube• Tough ABS
Plastic Handle• Lightweight /
Easy to useHD8921B
$2495
$75
$1295
Compact 2500 Electric Direct Drive• Free Air Delivery
@ 100PSI: 154LPM 2.5HP, single phase – 10Amp motor
• Designed for handyman use• Warranty: 1yr total unit• Pump RPM: 2850• 30 litre air receiver• Amps Draw: 8• Max PSI: 14500332
P17 Electric Belt Driven Compressor• Free Air Delivery @ 100PSI 320LPM• Filter Regulator c/w Automatic Drain• Warranty: 5yr pump, 1yr motor• 3.2HP, single phase • 15Amp motor• Pump RPM: 963• Amps Draw: 13• Max PSI: 145• 55 litre air receiver00087
PV25 Industrial 3 Phase Compressor• Free Air Delivery @ 100PSI: 545LPM• 2 cylinder, slow revving, cast iron pump• Warranty: 3 yr pump, 1yr Motor• 5.5HP 3 phase motor• Pump RPM: 1154,• Amps Draw: 6.6• 110 litre air receiver• Max PSI: 14500555
PHP15FB Fatboy Compressor• Free Air Delivery @ 150PSI: 300LPM• 3.2HP, single phase – 15Amp motor• Warranty: 5 Year Pump, 1yr Motor• Pump RPM: 1132• Maximum PSI: 175PSI• Amps Draw: 13• 110 litre air receiver00105
P14 Electric Belt Driven Compressor• Free Air Delivery @ 100PSI 275LPM• 2.75HP, single phase – 10Amp motor• Warranty: 5 year pump, 1yr motor• Pump RPM: 852• Amps Draw: 9.4• Max PSI: 125• 55 litre air receiver00257
$1169
$1050
$1450
$1975
Compact 5000 Electric Belt Drive Compressor• Free Air Delivery @ 100PSI: 235LPM• Filter Regulator c/w Automatic Drain
2.5HP, single phase• Warranty: 3yr pump, 1yr motor • 10Amp motor• 40 litre air receiver• Amps Draw: 9• Max PSI: 145• Pump RPM: 116000334
$250
$95
$745
with 180 degree mounting bracket, complete with carry handle, 1.5M connection hose, 1M click lock system
00147
8” Bench Grinder • Complete with light
• Ideal for the home handy man
• 3/4HP Motor• Warranty: 1yr total unit • 550 Watt
00271
20 Metre Retractable Hose Reel• 20 Metre 3/8” High Pressure Air Hose,• With ¼” BSP Fittings. • Self-levelling device to prevent jamming
upon rewind. • UV stabilized plastic moulding, complete
BONUS$1940
P17P Petrol Compressor• Free Air Delivery @ 100PSI: 350LPM• 2 cylinder, slow revving, cast iron pump• Warranty: 5yr pump, 3yr Honda• 6.5HP Honda engine• Pump RPM: 1061• 68 litre air receiver• Max PSI: 14500128
BONUS
BONUS
BONUS
BONUS
20M Air HoseWith every Belt Driven Compressor!00348
$175
15COMPRESSORS
$499
1516B Bench Drill• 3/4HP motor• 16mm Chuck• 16 Speed• 2 Morse Taper• Min RPM: 160
Max RPM: 3100• 381mm swing• hole size
3 -16mm• Warranty:
3yr00298
1316P Pedestal Drill• 3/4HP motor• 16mm Chuck• 12 Speed• Hole size 3 -16mm• Min RPM: 180
Max RPM: 2740• 2 Morse Taper• 330mm swing• Warranty: 3yr00299
$499
BONUS
16 GREASE, METAL PROTECTION & INDUSTRIAL
DEVCON Plastic Steel Putty (A)• Applies easily - no special tools required• Bonds to steel and many other metals,
as well as concrete• Patching of castings, making jigs
& fixtures• Repair of worn or
fatigued metals• Rebuilding bearing
journals and raceD10110
GALMET Cold GALMET Duragal®• 400g Aerosol• Organic zinc-rich protective
coating• Designed for long term
protection of iron and steel against rust and corrosion
• Provides a long lasting barrier similar in action to galvanizing
• 92% zinc in dry filmGGDSA
Galvanizing• 400g Aerosol• Organic zinc-rich protective
coating• Designed for long term
protection of iron and steel against rust and corrosion
• Easily applied to difficult areas
• Prolongs tool & die life
• Improves thread & surface finish
• Excellent penetration into deep holes and slots
• Prevents welding – ideal for difficult metals
• NZFSA Approved C14 (All animal product except dairy)
• 500mlRY550171
ROCOL RTD® Metal Cutting Liquid
• Semi-fluid grease spray containing molybdenum disulphide
• Penetrates to the wire rope core
ROCOL Wire Rope Spray
• Protects against wear and corrosion
• Suitable for all environments including marine and mining
• 300g aerosolRY452412
• Fast penetration to the pins and bushes.
• High water resistance.• Thin residual film ,which
will not drip or throw off.• Minimum pickup of
surface dirt and fibres.
ROCOL Chain & Drive Spray
• Jet spray for easy application.
• Ideal for drive, steering, conveyor, hoist and forklift chains.
RY442352
• Food grade ingredients• Excellent water
resistance• Good adhesive properties• High corrosion resistance• Jet spray for easy
application
ROCOL White Chain & Drive Spray
• NZFSA Approved C12 (All animal product except dairy)
• NZ AsureQuality Approved
• FDA Group 21 CFR 178.3570
RY442330
• Extends lubrication periods
• Good adhesive properties
• High load carrying capacity
• Temperature range up to 180°C continuous and +200°C intermittently
• NZ MAF Approved C12 (fish, game, meat)
• 400gmRY424851
ROCOL Sapphire Ultraplex
$1660
• Provides a long lasting barrier similar in action to galvanizing
• 92% zinc in dry filmGGCGA
$27$2850$2150$2950
$1675$1450
Holemaker PRO35 Magnetic Base Drill• Quality compact & robust
European made machine• Comes complete in metal
carry case• Magnetically attached
through cutter coolant system
• Lightweight, Only 10kg! • 35mm Diameter, 52mm
Depth Cutter CapacityHMPRO35
Cutter Set14, 18, 22mm cutters & pin ASSET-A
Holemaker Industrial Arbor• Adapt your drill press or lathe
to use Holemaker annular cutters• Time savings in excess of 40%
$250
Drill Doctor 360X Drill Bit SharpenerSharpen drill bits as easily as you sharpen pencils• 2.5mm - 13mm Drill Bit Capacity• Diamond Sharpening Wheel• 118º Sharpening Angle • 240V MotorDD360X
Ehoma C Clamps – General Purpose• Tempered and hot forged steel for rigidity• Nickel and chrome plating for high corrosion resistance
Part No Span x Depth Clamping Force (KGP) Price
EC-BC4 100 x 50mm 900 $36.50 EC-BC6 150 x 75mm 1000 $45.50 EC-BC8 200 x 100mm 1000 $57.00EC-BC10 250 x 115mm 1200 $72.50EC-BC12 300 x 125mm 1500 $89.90
$195
BONUS
$995
LED Flashlight Alluminium Body
with Magnetic Telescopic Pick-Up
BONUS
• Economical compared with conventional methods
• Large cutting capacity up to 150mm diameter
• Morse Taper: #2MT• Max Depth of Cut: 50mm• To Suit Shank Size: 3/4”SAIA2S
$3650From
$105
Press Vice150mm
BONUS
16mm 16 Speed Bench Drill
$395
20mm 12 Speed Floor Drill
• Motor Power 450W• 16 Speed 180-2770• Height(mm) 1000• N.W./G.W. (kgs) 60/ 63• Drilling Capacity
16mm (5/8”)• Chuck 3-16mm #2MTTD1416
BONUSPress Vice150mm
$590
• Drilling Capacity 20mm (3/4”)
• Chuck 5-20mm #2MT• Motor Power 750W• 12 Speed 280-2380• Height(mm) 1600• N.W./G.W. (kgs) 80/84 TD1420F
17DRILLING & FILE
The blue finish reduces chip build up on the cutting edge and is a better choice when drilling ferrous materials.
$145Imperial 29 Pce
$69Imperial 21 Pce
Metric and Imperial Drill Sets
$69Metric 19 Pce
$135Metric 25 Pce
General Engineering:• Holesaws: 19, 22, 25,
32, 35, 38, 44, 51, 57, 63 & 76mm
• Arbors: 1 x QF1 arbor, 3 x QF4 adaptor
• Pilot Drill: BD26 (1/4” x 105mm long)
#14 Set 11pc Cobalt H105S14
Holesaw H105 SetsGeneral Engineering:• Holesaws: 16, 19, 22,
25, 29, 32, 35, 38, 44 & 51mm
• Arbors: 1 x QF1 arbor, 5 x QF4 adaptor
• Pilot Drill: BD26 (1/4” x 105mm long)
#5 Set 10pc Cobalt H105S5
Electrician Set :• Holesaws:16, 20, 25,
32, 40 & 51mm• Arbors: 1 x QF1 arbor,
3 x QF4 adaptor• Pilot Drill: BD26
(1/4” x 105mm long)#9 Set 6pc Cobalt Elect H105S9
• Reduces torque and friction• Extends tool life• Improves surface finish• Accurate thread quality• Environmentally friendly
mineral oil base with 10% organic coconut oil. Free from Trichloroethane - low odour.
• Available in 250ml or 4L
Cutting & Lubricating Fluid M800
• Right Angle Attachment• 25mm insert bit Torsion
Phillips #2• 25mm insert bit Hex
5mm 50mm Torsion Phillips #2• 50mm Square Recess R2107RAD001
Right Angle Drill ATT HD
• Compact storage ideal for your tool box or workshop.
• Flat, half round, round, square x200mm.
300SET004
File Set 4Pce• Flat, square, round, half round x160mm• File handle warding-flat, three square 386911607
Needle File Set 7Pce
$29 $49
M8004000
$1204L
$12250ml
M8000250
$4990
$230$260$160
1/16-3/8 x 1/64ths D102S2
1/16-1/2 x 1/64ths D102S3
1.0 - 10.0 x 0.5mm D102SM2
1.0 - 13.0 x 0.5mm D102SM3
18 LUBRICATIONMX3-300• The original and the best.• Displaces, Penetrates,
Lubricates & Protects• Non-conductive,
non-static, non-toxic, non-corrosive and non-staining
MX3-300
MX3FG-300• Holds the NSF H1 food
grade certification• Can come in full
contact with food• No odour, non-toxic,
non-static, non-corrosive non-conductive and non-staining
MX3FG-300
MX4-300• Anti-corrosive Lanolin
lubricant.• Made using double
screened Lanolin, giving you superior quality.
• Excellent on all marine equipment.
MX4-300
MX6-250• Perfect for use as a rubber grease• Holds the NSF H1 food grade approval• High temp no meltMX6-250
$990
$1090
$980MX3-750Your favourite lubricant in a new 750ml sized handy pump pack!MX3-750
$1190
$1490
$1680ea
Molykote CU7439 High Performance Anti-Seize Spray
Molykote® MKLN High Performance Chain GreasePenetrates, protects & lubricates.Delivers excellent internal lubrication,good adhesion, and wash-outresistance. Temp. -25 to +160°C.Application Solutions:• High speed high load chain drives.• Excellent adhesion penetrates
with low viscosity carrier delivering adhesive grease and lubricating solids.
• Reduces wear and corrosion.• Extends chain life.• Provides top grade chain lubrication
in a can.400MLMKLN
$2395 $1520
Molykote® PTFE-N SprayA translucent dry film anti friction coating (AFC), with extremely low coefficient of friction. Air drying lubricant, non staining, providing excellent adhesion, long term lubrication
and reduced friction and wear. Temp. -180 to +240°C.
Application Solutions:
• Suitable for rubber guides, sliding, doors, sunroofs, hinges, windows,
• Small mechanisms in office equipment, electrical & homeappliance industries.
400MLPTFE-NUsed for components subjected to high temperatures high pressures & corrosive influences
• Excellent temperature range (-30ºC to +300ºC ) to +650ºC as a solid lubricant
• Low evaporation• No drop point• High performance lubricating
paste with synthetic combined oil, powdered copper, additives plus superior corrosion inhibitors
• Well suited for all components which need to be protected against water, steam and corrosion
• Flange seals, exhaust bolts, brake mechanisms
• Extremely adhesive paste performs in the most severe adverse environmentally exposed
400MLCU7439
MX4-750• New handy sized
pump pack.• Perfect for all marine
applications• Won’t affect rubberMX4-750
$1790
18
19
Sandblasting Cabinet• Heavy duty foot valve assembly with steel housing and high
production brass flow valve• Internal working cabinet: 1200(W) x 600(H) x 570(D)mm• Abrasive large particle separating screen and clean out door• Heavy Duty 14 gauge steel legs & 16 gauge panels• Pistol grip blasting gun• Window Size: 570 x 270mm• Working pressure: 60-125psi• Air regulator & gauge panel• Natural rubber / vinyl blaster gloves• Perforated steel flooring• Powder coated inside and out• External fluorescent lighting
system (2 x 18w)• Overall Dims: 1700(H) x 1300(W)
x 900(D)mm• Net weight: 140kg3031
Industrial Wall Mounted Fan • Fan Blade: 3 Blade Solid
Steel 750mm Diameter
Industrial Pedestal Fan• 240/50Hz 380 Watt• 3 Speed Motor• 750mm Solid Steel 3
Blade Fan• Cast Iron Base for
Stability• Airflow: 300m³/min• 0º to 90º Oscillating
Angle or Fixed• Adjustable Height
– 1235 to 1760mm (Blade Centre)
• Metal Oscillating Gears• Nett Weight: 27.5kg1015
Industrial Pedestal Misting Fan – 650mm
• 90º Oscillation • 3 Speed, 270 Watt
• Adjust. Mist – Exit Vol: 0 – 16Kg/Hour
• Water shortage protection• Suited to cooling people,
stockbreeding or greenhouse applications
1182
Sandblasting Tank• 37.85 Litre (10 Gallon) Capacity• Includes Safety Mask, Thread Tape &
Sand Funnel• Working Pressure: 60-125psi• CFM: 6 to 25 @ 125psi (Dependent on
Nozzle Size)• Sand Use: 27-90kg/hr (Dependant on
Nozzle Size)• Hose Length: 3m• Dimensions Tank: (H)508 x (Ø)305mm• Net Weight: 18kg• Comes with a Regulator
Porta Power Kit• Overall Carry Case
Dimensions: 750 (L) x 390 (W) x 170 (H) mm
• 14 Piece Kit containing Pump, Hose & Fittings
• 10,000kg Safe Working Capacity
• Contained in Sturdy Plastic Carry Case
12v/24v Dual Voltage Jump Starter• Cranking Amp: 900A 12V / 400A 24V• Peak Amp: 3000A 12 / 1500A 24V• Battery Type: 2 x 18AH sealed lead acid
• Internal battery status display: Color code voltmeter
• Power Outlet: 1 x 12V• Built in LED work light5054
3 Tier Service Trolley • Tray Dimensions: 735(L) x
410(W) x 915(H)mm• 100Kg Capacity• 75mm Soft Castors• Net Weight 14.6Kg6004
Air Hydraulic Bottle Jack • Safe Working Capacity 20,000kg• Minimum Height: 265mm• Maximum Height: 510mm• Hydraulic Lift: 160mm• Adjustable Height: 85mm• Air Pressure: 90-120psi• Air Fitting: 1/4” NPT• Nett Weight: 16.3kg2026
• Maximum Lifting Height: 150 mm• Cylinder Minimum Height: 367 mm• Net Weight: 37 kg2005
$89
$349
$249
$199
$169 $169
• Heavy Duty Wall Fixing Plate
• Oscillating: 0-90°• 240v / 380w /
½ HP• Weight: 18kg• 300 m3/min• Speeds: 31026
• 4x Ceramic Nozzle Tips 2.5, 3.2, 3.8 & 4.5mm
• Replacement Ceramic Tip Set Available (4pkt)
3008
$1795$275
WORKSHOP EQUIPMENT & FANS
$595
POLIFAN® Flap Discs (Zirconia)• High stock removal
and long product life• Suitable for
more demanding applications
• Performs well in edge grinding high load applications
40G 67764125 $5.9560G 67766125 $5.9580G 67768125 $5.95
5 & 10 Piece Tungsten Carbide Burr Sets• Allows the operator to work more safely• Reduces tool drive wear• Increases stock removal• Prevents chatter marks• Provides smooth
operation action
$24510Pce Set
26005694
$1255Pce Set
26005693
$595125mm
Ultra-Thin Cutting Wheel – INOX• Manufactured without addition of ferrous,
sulphurous & chlorinated fillers• Suitable for cutting of metal, sheet profiles
& solid materials• For use on stainless steel
EHT 105 69120933 $2.00EHT 115 61340412 $2.20EHT 125 61341112 $2.30
$2From
$690
General Purpose Chop Saw Cutting Wheel• Excellent cutting results on machines, up to 3KW output
• Suitable for cutting of solid material, sections & pipes• INOX also available for stainless steel
• 350mm x 2.8mm66323574
Portable LED Floodlight / Mains Lead720Lm FL10WFL $391440Lm FL20WFL $592100Lm FL30WFL $85
Rechargeable LED Floodlight
720Lm RCT10WLi $58
1300Lm RCT20WLi $125
Wall Mount LED Sensor Light/Mains Lead720Lm FL10WPIR $421440Lm FL20WPIR $68
Twin LED Tripod Floodlight / Mains Lead1440Lm FL2X10WTRI $902880Lm FL2X20WTRI $140
Wall Mount LEDFloodlight/Mains Lead720Lm FL10WWM $291440Lm FL20WWM $542100Lm FL30WWM $75
$39From
$58From
$42From
$29From$90
From
20 LIGHTING & ABRASIVES
$4450
Pistol Grease Gun• Heavy duty aluminium die cast head with
non-slip textured powder coated finish and plated pistol handle
• 1/8” BSPT• With 100mm (4”) steel extension, 300mm
(12”) flexible hose & 4 jaw coupler• Cartridge capacity 450g305221
Pneumatic Grease Gun• Intermittent operation with a single
shot of grease discharged with every squeeze of the trigger
• Complete with flexible hose 300mm (12”) and 4 jaw coupler
• Cartridge capacity 450g305223
Suction Gun• Designed to transfer gear oils in and
out of gear boxes, transfer cases and differentials
• Lip seal provides maximum suction• Powder coated, textured steel barrel for
firm grip• No priming required• Suitable for use with non
corrosive liquids• Capacity 500ml305227
Lever Action Grease Gun• Designed for continuous and demanding
industrial applications• Textured powder coated finish for non-
slip grip• Output: Delivers 1g per stroke (1oz per
28 strokes)• Pressure: 69,000 kPa (10,000 PSI, 690
Bar)• Cartridge Capacity 450g• Bulk Capacity 650cm³305219
$8595
$3950
$1995
Drum Pump Rotary• Suitable for transfer of diesel, kerosene,
heating oils, motor oils, lubricating oils (up to SAE 90) and non-corrosive fluids of light to medium viscosity
• With telescopic suction tube• Hi Nitrile rubber seals• Fits 50 litre to 205 litre drums• Output: 5 Litres per 20 turns 305251
Bucket Greaser Lever Action• Designed for high volume, high pressure
applications where rapid volume greasing is required
• Pump constructed from heavy-duty cast iron
• Includes spring loaded steel follower plate for removing air pockets from grease
• Complete with 10kg (22lb) in built steel grease bucket
• Output 4g per stroke305220
Lever Action Drum Pump• For use with oil based fluids,
heating oils, motor oils, heavy and light oils
• Fits 50 to 205 litre drums• Not recommended for use with
water based fluids,solvents, acids & anti freeze
• Output: 300ml (10oz) per stroke
• Complete with a curved spout and telescopic suction tube, 38mm (1 1/2”) and 50.8mm (2”)bung adaptor
305252
$8995
$19995
$5995
Ezee Flo Pump 20L• A versatile hand lift pump for trouble
free use on 20L• (5 gallon) containers with Rieke or
regular opening• Complete with rigid and flexible hose
and spout• Heavy duty steel suction tube with
the pump head made from high density polyethylene
• Pump Length 325mm• Output: 1 litre (1 quart) per 15 strokes305255
$4450
GREASE GUNS & DRUM PUMPS 21
22
Maxigear Twin Pack Deal• 16pc METRIC Ratcheting
Combination Wrench Set• 13pc SAE Ratcheting
Combination Wrench Set• 1/4’’ – 1’’ Supplied in a
rugged wrench rack• 8-24mm Supplied in a
Canvas Roll• 5° Ratchet ANSI &
DIN StandardMGC4090P
$259ea
30 LED Light• 12v & 240V
Chargers• Run time up
to 5 hoursPST-75520
$99ea
Verniers De-Burring Set & Engineers Square• Digital verniers• Triple Read• 150mm Engineers square• 10 x Noga de-burring blades• 1 x Noga de-burring tool handleMAXIPACK1025
$99
Electronic Digital Caliper 799 series
$62Dial
Indicator• Long life jewel
bearings• Tolerance hands
and bevel lock• Lug on centre back
• Range 0 – 10mm• Graduation 0.01mm
3025-481
Magnetic Base• Fine adjustment
indicator holder• Positive On/Off switch• Suits all Starrett test,
dial & AGD indicators• Holds 8mm, 9.5mm or
3/8” stem indicators or dovetail mount
3657AA
$135From
• Instant inch/mm conversion• Zero reading at any position• Fine adjustment thumb wheel• Light weight, ergonomic design• Large easy to read LCD screen• Hardened stainless steel
measuring jaws• Auto off after 5 minutes• Graduation 0.0005” 0.02mm• 24”/600mm and 40”/1000mm
also available0 – 6”, 0 – 150mm 799-6/150 $135.000 – 8”, 0 – 200mm 799-8/200 $178.500 – 12”, 0 – 300mm 799-12/300 $245.00
$7950
Western Red, Premium Welders Glove • Selected Premium Grade
Split leather • Sewn with Heat
Resistant Kevlar® thread
5X8 Premium Safety Glasses• AS/NZS 1337.1.2010 Certified• Sporty wrap-around design with
Patented Softpad Technology• Adjustable inclination for arms –
ratchet technology• Soft Silicone nose pads• Hard coated lens for Anti Scratch.• High quality Anti Fog coating for
long lasting protection.• 99.9% UV protection • Made in Italy EUV326
EUV327
Professional Respiratory KitsWelders Respiratory Kit RRS01WK-L $60.00Painters Respiratory Kit RRS01PK-L $71.00Chemical Respiratory Kit RRS01CK-L $75.00
• Reinforced Palm and Thumb
• Full Flame Resistant Jersey Lining
• Wear Seams Welted for extra strength
• Length 406mm longGWR162
$1190
$675 $60From
TOOLS, MEASURING & SAFETY EQUIPMENT
23
Razorsheild Auto Goggles• Reaction Time: 0.05ms• Sensors: 2 x Independent• Shade: 5-7-9-11-13• Sensitivity Setting: Adjustable• Delay Control: Adjustable• Power Supply: Battery, Solar Cells• Operating Temperature:
-10°C to 55°C• Standards:
ANSI Z87.1 / DIN / CE / TUV
• Warranty: 2 Year Date of Purchase
KUMRS
Unitig 170 DC Inverter C/W Leads & Case• Latest IGBT inverter technology• MMA
- Hot start (improves electrode starting) - Arc Force (boosts current to prevent electrode extinguishing) - Excellent arc stability with all electrodes
• DC TIG - Lift Arc ignition (prevents tungsten sticking during arc ignition) - Ultra smooth DC TIG welding current
KUMJR170CA
15
Razor weld •
3 Years Warranty
UNIMIG WARRANTY (Power Source only
)
MACHINE PACKAGE: KUMJR170CA MMA option includes: ARC170 Machine, Earth Lead & Arc Lead 16mm x 4m, PVC Carry Case
MACHINE PACKAGE: KUMJR170CT TIG option includes: ARC170 Machine, Earth Lead & Arc Lead 16mm x 4m, 17V x 4m TIG Torch, UNI-FLAME Argon Flowmeter Regulator and PVC Carry Case
Technical DataPower Supply / Phases (V-Ph) 240V - 1 ±15%Rated Input Power (KVA) 7.7Ie� (Amps) 15ARated Output 170A/26.8VWelding Current Range 10~170ANo-Load Voltage (V) 80Duty Cycle @ 40ºC as per AS/NZ60974-1 25%@170Amps MMA 35%@170Amps TIG E�ciency (%) 85Power Factor 0.70Protection Class IP21SInsulation Class FSize (mm) 320 x 120 x 210Weight (kg) 5.2Warranty 3 years on power source
ARC170CTTIG Option
ARC170CAStandard Package
Overview The ARC170 is an inverter-based welding machine produced using the latest in IGBT technology. This machine is portable, reliable, robust and stacked with features that you can expect from a quality welder. The DC MMA welding capability delivers a smooth and incredibly stable arc allowing easy welding with electrodes producing high quality welds including cast Iron, stainless and low hydrogen. The ARC170 is equipped with DC Lift Arc function, connection of the 17V TIG torch allows quality DC TIG welding of steel, stainless steel, bronze and copper. The Lift Arc function is superb and delivers perfect arc ignition every time without any sticking of the tungsten electrode to the work piece, a remarkably smooth stable arc produces high quality TIG welds. The ARC170 is an exceptional machine that is suitable for a wide range of applications including industrial use, site welding, farming, along with repair and maintenance applications. The Arc170 is packaged in a tough PVC carry case with your choice of MMA option accessories or MMA/TIG option accessories. The ARC170 gives you the best of both worlds great portability, with the power to get the job done.Built to our speci�cation and manufactured in compliance to AS/NZ60974-1
UNIMIG ARC 170MMA/TIG - 170 Amp DC Inverter WelderWelds: Steels, Stainless, Cast Iron, Bronze, Copper
Features• Latest IGBT inverter technology• MMA - Hot start (improves electrode starting) - Arc Force (boosts current to prevent electrode extinguishing) - Excellent arc stability with all electrodes • DC TIG - Lift Arc ignition (prevents tungsten sticking during arc ignition) - Ultra smooth DC TIG welding current• Thermal overload protection• IP21S rating for environmental/safety protection• Generator compatible (recommend 8.0 KVA minimum)• Tolerant to variable power supplies
Industrial Rated 240V Single Phase 170 Amp DC Welder Small, Lightweight and Portable
15
15 AMPRazor Weld 165 Invertera• Euro style MIG
torch connection• Internal wire feeder• 1Kg to 5Kg Spools• Adjustable Burn Back• Spool Gun Connection• Latest IGBT inverter technology• Stepless voltage & wire feed control• MIG/MAG with Gas and Gasless wire function• Excellent MIG welding with CO2 gas & mixed gasKUMJRRW165MIG
Razor Weld 205 Inverter• Euro style MIG & TIG
torch connection• Internal wire feeder,
gear driven• 1Kg to 5Kg Spools• Spool Gun Connection• Wire Inch• DC TIG with lift ARC
ignition• Latest IGBT inverter
technology• MIG/MAG with Gas and
Gasless wire function• Excellent Mig welding
with CO2 gas & mixed gases
KUMJRRW205MIG
Anti Spatter Spray• 280 Gram Can UNIMIG Anti-Spatter Spray is
engineered to protect parts, tooling, and fixtures from spatter build-up. A convenient solventbased, quick-drying aerosol that allows for pre-heat, higher duty cycles, and higher temperature applications. Excellent for fixture and tooling protection.
• Product is for industrial and professionaluse only. Use only in a well-ventilated areas
AS400
Razor Weld 200 CA Inverter• Single PCB construction• PFC ( Power Factor Correction)
for maximum electrical efficiency• VRD (Voltage Reduction Device)
- Arc Force (boosts current to prevent electrode extinguishing) - Excellent arc stability with all electrodes - Hot start (improves electrode starting)
• Thermal overload protection• IP21S rating for environmental/safety protection• Generator compatible (recommend 7.0 KVA minimum)KUMJRRW200CA
Razor Weld 200 DC Inverter• Latest IGBT Inverter Technology• Digital Weld Program Sequence Control• DC TIG (DC tungsten inert gas welding)
- HF Arc Ignition (prevents tungsten inclusion & tungsten damage) - Adjustable Pulse Frequency 0.5 - 200Hz - Peak Current, Base Current and Pulse
• Width Adjustment - 2/4T Trigger + Spot Time Adjustment - Start & Final Current Adjustment - Pre and Post Gas Flow Adjustment - Up and Down Slope Adjustment - Remote Torch Amp Control
KUMJRRW200DC
Welding BlanketLightweight, soft and flexible welding blanket material, providing incredible ease of use, while withstanding high heat. 31666
Straight Line Cutter
Automatic single blowpipe straight
line gas cutting machine
CG-30Razorweld Auto Helmet
• Grind Mode: Yes• Light Mode: Shade 4• Weld Mode: Variable
Shade: 9 -13• Viewing Field: 100mm x 60mm
• Sensors: 4 x Independent Photo Sensors
• Warranty 2 Year Date of PurchaseUMRWWH
$275
$5
$185
$299
$675
$995
$725
$1180
$195
$520
Uniflame Professional OXY/ACET Kit• 1 x Heavy Duty Tool Box, 1
x Heating Tip, 1 x Oxygen Regulator, 1 x Welding / Cutting Goggles
• 1 x Acetylene Regulator, 1 x Tip Cleaner Set
• 1 x Blow Pipe Handle, 2 x Oxygen Regulator Flash Back Arrestor
• 1 x Cutting Attachment, 2 x Fuel Gas Regulator Flash Back Arrestor
• 1 x Mixer, 1 x Combination Spanner
• 3 x Welding Tips Type 41 No’s 8/12/15, 1 x Radius Bar and Pivot
• 3 x Cutting Nozzles Type 41 No’s 8/12/15, 1 x Roller Guide
KKOXY1
$425
WELDING & ACCESSORIES
5 Piece SetSB-3, SC-3, SC-5, SF-3, SF-5 Double Cut
Carbide Burr Sets -Made in USA¼” Shank Premium Industrial Quality
Hi-Tensile Black Panther Industrial Snip• 85mm, high tensile Stainless Steel
serrated edged blades for superb durability• Most suited to heavy duty cutting• Comfort grip ergonomically
designed handles
Black Panther Industrial Snip • Ideal for multiple applications• Comfort grip ergonomically
designed handles• Stainless Steel serrated
edged blades• Ideal knife replacement tool
BURRSET1
$1255Piece
BURRSET3
$2658Piece
Retractable Utility Knife115-1Y
Stealth Pocket Knife c/w 5 free blades3038
Zebra 18mm Large Screw-Lock CutterComfortable, Secure Grip 580-1
$1995200mm
$950
$1895
$98 Piece Set SA-5, SC-5, SD-5, SF-5, SG-5, SH-5, SL-4, SM-5 Double Cut
$1655185mm
29-701
29-700
Sandblast Cabinet • Heavy-duty steel cabinet• 835 x 510 x 360-550mm blast area• Includes light,
tempered glass screen, gloves gun, ceramic nozzle, stand & hopper.
S289
Bag Garnet
Portable Video Palm Inspection
Camera• Includes magnetic pick up, mirror tool &
carry case• 9mm camera with
600mm cable• LED lighting,
53 x 40mm screenM696
Shelving Flexi Rack 4 x Wood Shelving• 455kg Shelf Load Capacity• 1040 x 430 x 1830mm• 4 shelves made from
16mm thick particle board• Can be configured as a
work bench styleS013
Industrial Shelving 4 Shelves 364kg / shelf• 364kg Shelf Load Capacity• 1955 x 610 x 1830mm• Industrial 4 shelf rack with
reinforced wire mesh• Adjustable grid pattern wire
shelvingS014
BONUS
Band Saw Blade• 10TPI Carbon• SUITS BS-7LB214
BONUS
Horizontal Metalcutting Bandsaw 7x12” Capacity• Mitre cuts to 45º• Built-in coolant system• 1hp, 240V motorB006
$198$275$297
$1045
Mobile Girder Rail Package• 1 tonne load capacity• 2500-3600mm adjust. height• 2300mm width inside frame• Swivel wheels with brakeK088Includes:Mobile Girder Rail C188 $6951 T Girder Trolley C147 $991 T Chain Block C143 $99
$120
$850
24
Please Note: We reserve the right not to sell a knife to a person under the age of 18 years.
$2850185mm
29-702
WORKSHOP & CUTTING TOOLS
25
Straight Air Die Grinder• Includes:• 6mm & ¼” collets• 2 year warranty73001
$59
27 Pce ¾ Drive Socket Set• 22-50mm & 7/8” – 2”• Includes ratchet• Sliding “T” & 2
extensions70015
42 Pce Bit SetTorx, Hex & spline includes:
• 3/8” & ½” adaptors, • spline & hex upto 12mm
• Torx T20 – T6070300
33Pce Screwdriver
& Bit Set• 20 assorted bits.
• 6 x blade• 6 x PH
70200
5 Pce Plier SetIncludes:• Combination Plier• Diagonal Cutters• Long Nose• Multigrips• Locking plier70750
15Pce Metric Combination Spanner Set7–21mm in tool roll70023
$7950
$129
$39
$32
$50
Extension Leads Industrial Quality• Insulated pins apply to Australian standards• Indoor/outdoor use• Neon light for both Pin & Plug• 15 amp lead, 10 amp plug (15 amp plug
available)
5m 70119 $16.5010m 70120 $23.0015m 70121 $32.0020m 70122 $41.0025m 70123 $50.0030m 70124 $60.00
$1650From
$899 $899
WD-40 Multi-Use Product 350g Smart Straw• Protects metal from rust
and corrosion• Cleans and lubricates• Drives out moisture• Permanently attached
Smart Straw – Never lose the straw again
61109
Solvol 4.5L Liquid• Natural citrus oils and
fine granules remove ingrained dirt
• Contains no petroleum solvents
• Suitable for removing inks, paints, silicone, glue and more from skin
71126
WD-40 Specialist White Lithium Grease• Thicker solution
which provides long term lubrication that won’t drip or run
• Can work in extreme temperatures of -30°C to +150°C.
• Water and heat resistant lubricant
• Ideal for bearings, hinges, winches, water pumps as well as gear and brake mechanisms
21102
$40
TOOLS, LUBRICATION & CLEANING
Heavy Duty 20L Gear Oil Drum Pump
• Heavy duty Zinc alloy (Zamak) drum pump and bung adapter• Sliding bung adapter
suitable for different height drums
• Delivers 170mL per stroke - on the down stroke
• Nozzle crimped to 1.8m rubber hose
• Ideal for the transfer & top ups of engine, hydraulic, gear, diff and synthetic oils where vehicle through put and owner expectations are high
10028
Cordless LED Workshop Light • 30 high intensity LEDs
emit 7-8 hours of light before recharge
• Shatterproof polycarbonate lens
• Resistant to water, grease and oil
• 240V and 12V rechargeable
20044N
20L Gear Oil Drum Pump • Capable of delivering up to
110mL on the downstroke• Downtube extension and
extra Reike adaptor make the pump suitable for use with a variety of 20L drums available on the market
• Ideal pump for the transfer of engine, gear, diff and hydraulic oils in busy vehicle servicing workshops
• Drainback nozzle holster ensures that excess oil ends up back in the drum
8828N2
Multi Purpose Top Up Kit• Ideal for topping up
difficult to access oiling points in the workshop and at home
• Suitable for all oils, automatic transmission fluids, brake fluids and some hand cleaners
• Container capacity of 1L7701A
$145
$22
AdBlue® Rotary hand Operated Drum Pump• Suitable for the
transfer of AdBlue®• Flow rates of up to
18 L/min• Suits 60L and 205L drums• Supplied complete with 3 metre
delivery hose, stainless steel spout,AB80055
$125
$4190
$125
El Series 12V Diesel Refuelling Tank Kit• 12 month warranty
Flow rates of up to 38 L/min• Self priming rotary vane pump• Suction capacity of up to 2m• Duty cycle of 30 minutes on, 30 minutes off• Equipped with a 12V DC motor and supplied
with suction & delivery hoses, battery cable with clamps, inlet filter & a manual plastic nozzle
F20020N
$330
EL Series Mini Pistol Grease Gun• Develops grease
pressures of up to 3,500psi (241bar)
• Suits bulk grease and 85g grease cartridges
• Heavy duty four jaw coupler
• 12 month warrantyG10050N
$2250
LUBRICATION & PUMPS
$1100ea
AdBlue® 205L 240V Drum Dispensing Kit• Polypropylene pump housing,
EPDM diaphragm, Viton seals• Flow rates of up to 23L/min• Manual shut of nozzle• 1.5m x ¾” ID PVC suction hose• 6m x ¾” ID PVC delivery hose • Also available in 12V 240V AB80020 $110012V AB80015 $1100
26
Piusi 1" BSPF Diesel Filter with Clear Plastic Bowl- 100 L/min• Max. pressure 50psi (3.5bar)• Removes water & particles• Filtration down to 30 micron611200
$145
$110 450g Trigger Action Grease Gun• Grease pressures of up to
8,500psi (586bar)• Delivers up to 1.1g of
grease per stroke• Coarse thread on barrel
assembly eliminates cross threading during cartridge changeover
• Twin Lock System seals the piston and eliminates the possibility of dummy lubrication
• Manufactured in Germany• 4 year warranty660AN
$98
• Aluminium body with oil resistant rubber casing
• 5-150psi (0.3-10bar) measuring range, accurate to ±1%
• Two position lever for inflation and deflation
51114
Automatic Digital Tyre
Inflator
27
Metabo 5.2 Ah 18v BatteryGreat freedom: Drive in screws, drill holes, saw, cut, grind, polish and illuminate with 5.2 Ah for even longer - completely without cable321000350
Impact DriverAU68901020
Impact WrenchAU68901030
18v Brushless Hammer Drill• Battery overload & single cell protection
90 Nm Hammer Drill • Drills Steel/Wood/Concrete• Max Speed: 2,050rpm• 2 x 5.2 Amp Hour batteries• ASC 30 Air Cooled Charger• Plus one tool of your choice
Angle GrinderAU68901010
Choose Your Bonus Skin
Or Or
$679ea
$290
BONUS
$179
125mm Angle Grinder, 1250 or 1700w• TC electronics• Autobalancer• Soft Start• Marathon Motor• Safety clutch• Restart protection• Quick Nut - easy disc change, no
tools required• Auto Stop Carbon Brushes• Anti Vibration handle600534000
$3791700w
Tin of 10 Cutting Discs
125mm x 1.0mm 61635900
BONUS
40 Pc 1/2” Sq. Dr. Impact Socket Set Metric • Manufactured from drop forged Chrome
Molybdenum steel with phosphate finish for greater corrosion resistance.
• High visibility laser etched markings for easier socket selection.
• Standard socket sizes - 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 23, 24, 26, 27 & 30mm.
• Deep socket sizes - 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 23, 24, 26, 27 & 30mm.
• Universal Joint.• 125mm extension bar.• Supplied in blow molded
storage case. A84617
Sq. Dr. Composite Body Impact Wrench• Forward and reverse shift
with 3 positions • Air inlet – 1/4” • Air pressure – 90 PSI
Sq. Dr. Impact Ball End Hex Bit Socket Set Metric or SAE• Manufactured from drop forged
Chrome Molybdenum steel. • Hardened and tempered for strength.
Supplied in metal case
$99
$199
34 Pc 1/2” Sq. Dr. Impact Socket Set SAE• Manufactured from drop forged Chrome
Molybdenum steel with phosphate finish for greater corrosion resistance
• High visibility laser etched markings for easier socket selection
• Standard socket sizes - 5/16”, 3/8”, 7/16”,
9 Pc 1/2” metric Sizes - 6, 7, 8, 10, 12, 14, 15, 17 & 19mmA84605 $99
9 Pc 1/2” SAE Sizes - 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” & 3/4”A84606 $99
3/4” 2100Nm• Maximum torque –
1550 Ft-lbs/2100Nm• Free speed – 5000 rpm• Length – 235mm A14035 $629
1/2” 1750Nm• Maximum torque –
1290 Ft-lbs/1750Nm• Free speed – 1750 rpm• Length – 196mm A14015 $329
3/8” 600Nm• Maximum torque – 450
Ft-lbs/600Nm• Free speed – 10000
rpm• Length – 171mm A13905 $249
$249From
1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”.
• Deep socket sizes - 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”
• Universal Joint• 125mm extension bar• Supplied in blow molded storage
caseA84618
$199
KHA 18 LTX Rotary Hammer Skin• Skin Only - Battery not included• Hammer stop for drilling in rotary
only mode and for screw driving• Rotation stop for chiselling• Idle revolution – /min• Max. impact rate - 4.000 /min• Impact power - 164 J/s• Bit retainer – SDS-plus• Clockwise and anti-clockwise rotation• Drill diameter in: Concrete – 24mm,
Steel – 13mm, Soft Wood – 25mm• Vario (V)-electronics for working with
customised speeds for the materials used
• Max. single blow energy (EPTA) - 2,2 J• Weight (incl. Battery pack) - 2,9 kg600210890
13pc SDS Set Assorted sizes
AU69001600
Metabo 18v LED Torch• Skin Only• Compact & handy for
versatile use• Lamp head can be
tilted and locked in 12 positions
• Robust die cast aluminium case
• Includes swivelling hook for suspending the torch
600368000$59
TOOLS & POWER TOOLS
28
248Pce AF & Metric Wall Cabinet• Wall Cabinet (TCW1) • 1/4, 3/8 & 1/2” DR Socket Sets – Metric
& AF• Combination, Open End & Ring
Spanners Set – Metric & AF• Adjustable Wrenches• 28pc Hex & Star Bits Set• 30pc Hex Key Set – Metric & AF• Precision Screwdriver Set• Assorted Pliers• Punch & Chisel Set• Podger Bar• Hammer, Hacksaw & much more...ATK50
5PC File Set
• 8” Round, Half Round & Flat
• 6 & 10” MillA15002
8Pce Combination Spanner Set – AF• 1 – 1-1/2” • Carbon Steel• Raised Panel19828
1 Watt LED Aluminium Torch • Tough Anodized Aluminium
Water Resistant Body• Shatter Resistant
PVC Lens• Brightness: 130lm, 100,00
hours• 3 x AAA Batteries Included137408
$40
$22
$1450
$175262Pce AF & Metric Ute Box Kit• 3 Drawer Utebox with BBS • 3 High Density Foam Inserts • 1/4, 3/8 &1/2’’ DR Socket Sets • Combination, Open End &
Ring Spanners Set • Assorted Pliers • Anti-Slip & Precision
Screwdriver Sets • Adjustable Wrenches • Hex Key Set • Punch & Chisel Set • Hacksaw & Hammer • Plus Much More...ATK703U
$1895
6Pce Combination Spanner Set – Metric or AF• Carbon Steel• Extra Large • Raised Panel35 – 51mm 19830 $2651-3/8 – 2” 19829 $265
$265
WORKSHOP & HAND TOOLS
CATEGORY TITLE
41Pce 1/2” Dr Metric & AF Socket Set • 10 - 32mm • 3/8 - 1-1/4” • 5/8 & 13/16” Spark Plug Sockets• Ratchet, Sliding T Bar & Extensions10120
$150$90
39Pce 1/4 & 3/8” Dr Socket Set• 1/4” DR Metric: 4 - 12mm • 1/4”AF DR: 3/16 -1/2” • 3/8” DR Metric: 9 - 19mm • 3/8” DR AF: 3/8 - 3/4” • 5/8”Spark Plug Socket 10100
4 Tonne Bottle Jack• Lifting Range:
200-325mm• Adjusting
Height: 80mm• Weight: 4kgBJ4000
8 Tonne Bottle Jack• Capacity: 6t• Minimum
Height: 240mm• Maximum
Height: 400mmBJ8000
12 Tonne Bottle Jack • Lifting Range:
245-405mm• Adjusting
Height: 80mm• Weight: 15kgBJ12000
$69$60$45
262Pce Toolkit Metric & AFHDFI Tray: Offset Screwdriver, Screwdrivers, Ring Spanner Set, Comb Spanner Set, XS Comb SpannersHDFI Tray: Screw Extractor Set, Ring Spanner Set, Open End Spanner Set, Combination Spanner SetHDFI Tray: 1/4, 3/8 & 1/2’’ Dr Skt SetsHDFI Tray: Diag. Cutters, Comb, Locking & Longnose PliersHDFI Tray: 32 Blade End Feeler GaugeHDFI Tray: Various Screwdrivers (Including Stubbies)• 6 Drw Toolbox With Ball
Bearing Slides• 6 High Density Foam
Insert TraysATK70BB-7
7Drw Rollaway• 680 x 458 x 995mm• Fully Lockable• Heavy Duty Casters• Ball Bearing SlidesA12112
BONUS
$1750
24Pce Combination Spanner Set• 6 – 21mm• ¼” – 15/16”• Carbon Steel15860
$105
WORKSHOP & HAND TOOLS 29
30
TLWN06
$40 Truck Load Winches & StrapsMini truck l/winch & 6mt strap MTLW6 $24.00Mini truck load winch strap 6m MTLW STRAP X 6M $12.00Truck gate winch (narrow) - 6m TLWN06 $40.00Truck load winch clip-on ratchet type 9m TLWRC09 $60.00Truck load winch clip-on ratchet type 11m TLWRC11 $66.00Truck load winch slide on ratchet type 9m TLWRS09 $55.00Truck load winch slide on ratchet type 11m TLWRS11 $60.00Truck load winch strap x 6 metre TLW STRAP X 6M $12.00Truck load winch strap 9 metre TLW STRAP X 9M $13.00Truck l/winch strap 11 metre 2500kg LC TLW STRAP X 11M $16.50Truck l/winch strap 13 metre 2500kg LC TLW STRAP X 13M $20.00
$396
Straddle Manual Stacker 1500Kg
MSS1500
Pallet Truck 2500KG Single WheelPT685
$1500
Fork Lift Extensions1524 x 127 FLEXT1524 $300 1830 X 152 FLEXT1830 $330
$300From
MATERIAL HANDLING EQUIPMENT
$690
Scissor Lift Table350KgLT350
$380 $580
Scissor Lift Table300KgLT300
Scissor Lift Table150KgLT150
CATEGORY TITLE
Forklift Safety Work Platform FLSWP001
Round Slings
1T X 1 Metres RS11 $4.401T X 2 Metres RS12 $6.601T X 3 Metres RS13 $9.901T X 4 Metres RS14 $17.002T X 1 Metres RS21 $6.602T X 2 Metres RS22 $11.002T X 3 Metres RS23 $17.002T X 4 Metres RS24 $19.803T X 1 Metres RS31 $12.003T X 2 Metres RS32 $16.003T X 3 Metres RS33 $24.003T X 4 Metres RS34 $36.00
$440From
Webbing Slings
1T X 1 Metres WS11 $5.501T X 2 Metres WS12 $7.701T X 3 Metres WS13 $11.001T X 4 Metres WS14 $16.002T X 1 Metres WS21 $7.702T X 2 Metres WS22 $15.602T X 3 Metres WS23 $19.802T X 4 Metres WS24 $24.003T X 1 Metres WS31 $11.003T X 2 Metres WS32 $19.803T X 3 Metres WS33 $28.003T X 4 Metres WS34 $39.00
$550From
Riggers Fall Arrest HarnessTRR01
$160
Webbing Lanyard 1.5m w/ Shock AbsorbWL01
Stainless Steel Castors - Nylon Fixed, Swivel or Braked3” Fixed SSLDF3NY $20.004” Fixed SSLDF4NY $22.005” Fixed SSLDF5NY $28.003” Swivel SSLDS3NY $39.004” Swivel SSLDS4NY $40.005” Swivel SSLDS5NY $48.003” Swivel Total Brake SSLDS3NY/TB $40.004” Swivel Total Brake SSLDS4NY/TB $48.005” Swivel Total Brake SSLDS5NY/TB $55.00
Puncture Proof Non-Marking Grey Pu Wheels2.50 X 4” PU250419351G $18.00
3.00 X 4” PU300419351G $26.003.50/4.10 X 4” PU350419351G $30.004.00 X 8” PU40081X21G $40.003.50/4.10 X 4” 5/8 BRG PU350416351G $30.003.50/4.10 X 4” 5/8 BRG Off Set Rim PU350416353G $30.003.50/4.10 X 4” 3/4 BRG Off Set Rim PU350619353G $30.00
$18From
Heavy Duty Castors - Cast Iron Wheel w/PU Tyre4” 320kg Fixed HIF4CIPU $16.505” 400kg Fixed HIF5CIPU $20.006” 450kg Fixed HIF6CIPU $22.008” 450kg Fixed HIF8CIPU $28.004” 320kg Swivel HIS4CIPU $24.005” 400kg Swivel HIS5CIPU $25.006” 450kg Swivel HIS6CIPU $30.008” 450kg Swivel HIS8CIPU $36.004” 320kg Total Brake HIS4CIPU/TB $30.005” 400kg Total Brake HIS5CIPU/TB $36.00
6” 450kg Total Brake HIS6CIPU/TB $36.008” 450kg Total Brake HIS8CIPU/TB $40.00
$18From
$18From
$120
$1600
WHEELS, SLINGS & SAFETY EQUIPMENT 31
Weldmatic Workshop™ Trolley• Gas bottle tray & chains to
secure bottle.• Mobile Welding Trolley• Customised support plate
for Weldmatic 190.• Heavy duty wheels & castors.• Powder coated panels.• Cable hangers.• Two storage drawers. AM353
Weldmatic 190• 190 Amp MIG Welding Package• Ideal for home, rural, light
manufacturing and hire fleets.• Fillet weld up to 8mm steel,
stainless steel and aluminium.• Easy set-up and adjustment, with
9 voltage settings.• Suits gas shielded or gasless flux-
cored wires.• 1kg & 5kg spool capacity.• 3 year Gold Shield warranty,
including parts & labour.CP131-0
$189 $1099
Miller Digital Elite™ SeriesAuto-Darkening Welding Helmets:
• Complies with Australian Standards AS/NZS 1338.1 (Auto-Darkening) and
AS/NZS 1337.1 B (High Impact).• Digital controls to adjust modes,
shade, delay and sensitivity• Includes: 5 outside cover lenses, 2
inside cover lenses and helmet bag• 3 year warranty (auto-darkening lens only)
• Battery powered with solar assist
Bairnsdale Branch 521 Main Street (03) 5153 1555 [email protected] Branch 1930 Hume Highway, VIC (03) 9357 6166 [email protected] Branch 38 Yarragon Rd (03) 5662 4300 [email protected] Branch 61 Chickerell Street (03) 5134 3777 [email protected] Branch 1/8 Purton Road (03) 5940 1111 [email protected] Branch 135 Raglan Street (03) 5144 5111 [email protected] Branch 1055 Princes Highway (03) 5175 0500 [email protected] Branch - Head Office 13 Endeavour Street (03) 5623 5444 [email protected] Branch 28 Inverloch Road (03) 5672 1200 [email protected]
All prices include GST and prices in this catalogue may vary from store to store or be subject to plus freight where applicable. Some products may not be available at all stores and are subject to availability. BJ Bearings reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may vary to actual items.
YOUR LOCAL BJ BEARINGS STORES QUALITY ENGINEERING SUPPLIES
Inferno 257217 Joker 257218Lucky 257214
Black 257213
WIA Blue Helmet• Magnifying lens holder & Grind Mode• Complies with Australian Standards: AS/NZS 1338.1
(Auto-Darkening) & AS/NZS 1337.1 B (High Impact).• 1 year warranty (auto-darkening lens only)• Variable Shade (9-13)• Battery powered with solar assist235620
$129
$398ea