FURNITUREFITTINGS SYSTEM
CONTENTS
TEL: 9455 2122 FAX: 9455 3680
PAGE
BBiemel’sCabinet Hardware
Suppliers of Quality Products
Concealed hinge parts Drilling patterns for hinge cup Hinge and the mounting plate assemblyHow many dinges per door?Side adjustmentHeight adjustmentDepth adjustment
ST Plus 110 ST 110/45ST170
O
O
ST for Pie-cut corner cabinet
Mounting plates
1122334
7-891011
14
Hinge attached Soft CloseStand alone Soft Close
56
ST110/15ST110/90
O
O
1213
O
Concealed Hinges
7 Holes for Fixing Screws
1 Hinge Cup
2 Hinge Arm
3 Closing Mechanism
4 Inner Link
5 Outer Link
6 Axis
8 Side Adjustment Screw
9 Height Cam Adjuster
12 Mounting Plate
11 ST Time-saving Mounting System
Depth Cam Adjuster10Note: The drawing showsthe ST plus hinge on a cam-adjustable mounting plate.
Concealed HingesConcealed Hinge Parts
Drilling Patterns for Hinge Cup
Type ofCup
Interaxis45mm
45
9.5
35
Drilling Pattern
48mm
48
6
35
Interaxis
Drilling Pattern
52mm
52
5.5
35
Interaxis
Drilling Pattern
Screw-on-ready
MachineInsertionReady
Easy FixSystem
Interaxis is the distance between two holes for fixing screws on the hinge cup.
INTERAXIS48mm, 45mm & 52mm
• ST plus series• ST series
Hinge and the mounting plate assembly
ST Time Saving System
• ST plus series• ST series
The door is assembled on the cabinetside simply by fixing the two hooksunder the hinge arm on the outer part ofthe mounting plate and pressing gentlyon the rear part of the hinge.
For disassembly press the button onthe rear of the hinge arm.
Assembly:
Disassembly:
How many hinges per door?
Check the enclosed specifications forthe number of the required hinges per doorby considering both door height and weight. In case od doubt please contact Biemel’s Cabinet Hardware.
Concealed Hinges with35mm Hinge Cup Diameter
• ST plus series• ST series
1 2
Adjustmentrange
Concealed Hinges Concealed HingesSide Adjustment Depth Adjustment
The side adjustment is made byrotating the appropriate screw on the hinge arm.
By rotating the appropriatescrew
• ST plus series• ST series
Height Adjustment
By rotating the cam adjuster
• ST plus series and ST series withcam adjustable mounting plates.
The height adjustment is made byrotating the cam adjuster on the mounting plate.
By releasing the fixingscrews on the slottedmounting plate
• ST plus series without cam-adjustable cruciform mounting plates
For height adjustment the twomounting plate fixing screws have tobe temporarily released while makingthe manual adjustment.
The system enables easy adjustmentof the door depth to assure that thedoor fits well on the side of the cabinet.
By rotating the cam adjuster
• ST plus series
The adjustment is made by rotating thecam adjuster on the hinge arm.
By releasing the fixing oradjustment screw
• ST series
The depth adjustment is made bytemporarily releasing the adjustmentscrew (ST series) or by fixing screw(Basic Series). After the adjustment ismade the screw has to be re-tightened.
Adjustmentrange
3 4
849421
.3
18.3
Hinge AttachedSoft Closing System
Soft Close TL• ST plus 110, 125• ST 110 • Basic 110
• Same item can be used on all crankings and angled hinges• Designed to fit the concealed hinge cup and requires no extra space inside the cabinet• Adjustable damping force• Toolless mounting
48mm
48
6
35
Interaxis
5
Made of steel and plastic
LH1OZ90
Mounting details
Toolless assembly
Insert Soft Close attachment into the holes on the hinge
Press down
Adjusable damping zone and force Turn upwards ‘+’ to increase and ‘-’ to decrease the damping force
Recommended number per door and positioning
2 3 4 5
Soft Close attachment
Stand Alone DoorSoft Closing System
• Soft and gentle door closing• Stand alone damper• Place and fix mounting• Multiple applications• Optimal closing speed of any door dimension and weight• Discreet design
6
Made of zinc and plastic
LH1OZ50
Mounting details
Adjusable damping zone and force Turn upwards ‘+’ to increase and ‘-’ to decrease the damping force
Recommended number per door and positioning
2 3 4 5
170
Soft Close 170• ST 170• Basic 170
For 170 hinges, face-frameapplications and universalstand-alone solution
Item Number
Soft Close 170 is mounted on the cabinetside by using chipboard screws at least15mm long
For perfect door closing it is necessary tomake 1mm gap between door and sidepanel through hinge depth adjustment
Soft Close attachment
2 3 4 5
Item Number
Toolless
PU = 100
PU = 100
ST plus 110
0mm Cranking
• Opening angle 110 deg.• Drilling diam. for hinge cup 35mm• Drilling depth 11.5mm• Hinge on plate mounting system ST
SideAdjusment+3/-1mm
HeightAdjusment+2/-2mm
DepthAdjusment+1.5/-1.5mm
Mounting details Mounting platedrilling distance
Mounting plate thickness table
D
X
K3
13 14 15 16 17 18
345
2 1 0
3 2 1 0
3 2 1 0
ST plus 110
FULL COVER
9mm CrankingHALF COVER
• Quick, confortable and precise depth adjustment.
Cup Type
Item Number
Item Number
Item Number
Mounting plate thickness table
X
K3
4 5 6 7 8 9
D
345
2 1 0
3 2 1 0
3 2 1 0
Drawings show application on D=0mmthick mounting plate
Mounting details Mounting platedrilling distance
Drawings show application on D=0mmthick mounting plate
Cup Type
Item Number
Item Number
Item Number
15mm CrankingINSET HINGE
( Inset Hinge is available in ST Verson only )
Cup Type
Item Number
Item Number
Item Number Mounting details Mounting plate
drilling distance
Drawings show application on D=3mmthick mounting plate
Mounting plate thickness tablev
K2
16 17 18 19 20 21
345
2 2 3
3 33
3 D
3 3
Interaxis
45mm
45
9.5
35
48mm
48
6
35
Interaxis
52mm
52
5.5
35
Interaxis
7 8
o o
Legend:Screw-on ready
Machine insertion ready
Easy-fix system
Legend:Screw-on ready
Machine insertion ready
Legend:
Machine insertion ready
LH6OT70
LH3OT71
LH4OT72
LH1OT13 *
LH2OT69 *
LH6OV71
LH3OV72 LH1OV70 *
LH30328
LH5OT94 *
LH50401 *
LH5OT95 *
* - Not available with Soft Close option.
* - Not available with Soft Close option.
Door Clearance Table
Fmin
v
K0.3
16 17 18 19 20 21
345
22
0.3
0.3
0.5
0.5
0.5
0.7
0.7
0.7
1.0
0.9
0.9
1.3
1.2
1.2
1.7
1.6
1.5
2.5
2.1
2.0
Door Clearance Table
Fmin
v
K0.3
16 17 18 19 20 21
345
22
0.3
0.3
0.5
0.5
0.5
0.7
0.7
0.7
1.0
0.9
0.9
1.3
1.2
1.2
1.7
1.6
1.5
2.5
2.1
2.0
Door Clearance Table
Fmin
v
K0.3
16 17 18 19 20 21
345
22
0.3
0.3
0.5
0.5
0.5
0.7
0.7
0.7
1.0
0.9
0.9
1.3
1.2
1.2
1.7
1.6
1.5
2.5
2.1
2.0
110 o
110 o
110 o
PU = 200
PU = 200
PU = 200
ST 110/45
9mm Cranking
• Opening angle 110 deg.• Drilling diam. for hinge cup 35mm• Drilling depth 11.5mm• Hinge on plate mounting system ST Side
Adjusment+3/-1mm
HeightAdjusment+2/-2mm
DepthAdjusment+5/-1.5mm
Mounting details Mounting platedrilling distance
ST 170
HALF COVER Cup Type
Item Number
52mm
52
5.5
35
Interaxis
Item Number
Item Number
Drawings show application on D=3mm thick mounting plate
L=36 for thickness D=0L=35 for thickness D=1L=34 for thickness D=2L=33 for thickness D=3
Drawings show application on D=3mm thick mounting plate
Mounting plate thickness table
D
X
K3
11.5
345
2 1 0
3 2 1 0
3 2 1 0
12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 18
D
P
K3
9
345
2 1 0
3 2 1 0
3 2 1 0
9.5 10 10.5 11 11.5 12 12.5 13.5
0mm Cranking
• Opening angle 135-165 deg.• Drilling diam. for hinge cup 35mm• Drilling depth 12mm• Hinge on plate mounting system ST
SideAdjusment+3/-1mm
HeightAdjusment+2/-2mm
DepthAdjusment+5/-1.5mm
Mounting detailsMounting platedrilling distance
FULL COVER Cup Type
Item Number
Item Number
Item Number
Drawings show application on D=0mm thick mounting plate
In 90 degree position the door isonly 1.4mm distant from sidepanel.
Mounting plate thickness table
D
X
K6
10
345
5 2 0
11
67
12 13 14 15 16 17 18 19 20
4 3 1
6 5 2 04 3 1
6 5 2 04 3 1
6 5 2 04 3 1
6 5 2 04 3 1
3KC
4 75 6
-9.0
C value with D=0 mounting plates
-8.1 -7.1 -6.1 -5.2
Interaxis
45mm
45
9.5
35
48mm
48
6
35
Interaxis Interaxis
45mm
45
9.5
35
48mm
48
6
35
Interaxis
52mm
52
5.5
35
Interaxis
9 10
o o
Legend:Screw-on ready
Machine insertion ready
LH30431
LH3ON17 LH1ON16 * LH3OR13 LH1OM73
LH6OR17
LH5OM74 LH5ON18 *
* - Not available with Soft Close option.
Legend:Screw-on ready
Machine insertion ready
Door Clearance Table
Fmin
v
K0.3
16 17 18 19 20 21
345
22
0.3
0.3
0.5
0.5
0.5
0.7
0.7
0.7
1.0
0.9
0.9
1.3
1.2
1.2
1.7
1.6
1.5
2.5
2.1
2.0
Door Clearance Table
Fmin
v
K0.0
16 17 18 19 20 21
345
22
67
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
2.6
5.1
23 24
45 o
PU = 200 PU = 50
170 o
Door Clearance Table
Fmin
v
K0.3
16 17 18 19 20 21
345
22
0.3
0.3
0.5
0.5
0.5
0.7
0.7
0.7
1.0
0.9
0.9
1.3
1.2
1.2
1.7
1.6
1.5
2.5
2.1
2.0
ST FOR pIE-CUTCORNER CAbINET
• Opening angle 110 deg.• Drilling diam. for hinge cup 35mm• Drilling depth 11.5mm• Hinge on plate mounting system ST
SideAdjusment+3/-1mm
HeightAdjusment+2/-2mm
DepthAdjusment+5/-1.5mm
Mounting details Drilling Details
CORNERCABINETBYFOLD (Piecut)
Cup Type
Item Number
Item Number
Item Number
V = 16 - 22 mmK = 3 - 5 mm
Any ST mountingplate of thicknessD=0 can be used
The diagonal adjustment is madeby rotating the appropriate screw asshown on the drawing
Adjustments
Interaxis
45mm
45
9.5
35
48mm
48
6
35
Interaxis
52mm
52
5.5
35
Interaxis
11
ST 110/15
9mm Cranking
• Opening angle 110 deg.• Drilling diam. for hinge cup 35mm• Drilling depth 11.5mm• Hinge on plate mounting system ST Side
Adjusment+3/-1mm
HeightAdjusment+2/-2mm
DepthAdjusment+5/-1.5mm
Mounting details Mounting platedrilling distance
HALF COVER ANGLE Cup Type
Item Number
Item Number
Item Number
Drawings show application on D=0mm and K=4mm thick mounting
L=37 for thickness D=0L=36 for thickness D=1L=36 for thickness D=2L=35 for thickness D=3L=33 for thickness D=9
Mounting plate thickness table
Interaxis
45mm
45
9.5
35
48mm
48
6
35
Interaxis
52mm
52
5.5
35
Interaxis
12
o
D
x,P
K9
1
345
3 1 0
9
9
2 3 7 8 9 10 11 12
2
3 1 02
3 1 02
Drawings show application on D=0mm and K=4mm thick mounting
Legend:
LH3OU16
LH3OV15
LH3OV62
PU = 100
15 o
PU = 100
Machine insertion ready
MOUNTING pLATES
Steel Mounting plates with Cam Adjustable Height
Drilling pattern Dimensions
Mounting plateThickness
Mounting plate Type 10.5
Mounting plate
Thickness(D) Item
NumberItemNumber
0mm
2mm
3mm
LP1OR22
LP1OR23
LP1OR24
LP2OS43
5.8 Ø 5
min
10.5
LP2OS44
LP2OS45
0mm
2mm
3mm
LP31136
LP31138
LP31139
LP3OP26
LP3OV19
LP3OP27
9mm LP33651
Steel Mounting plates
Zinc Diecast Mounting plates
Legend of Mounting plate Type Symbols
Cam AdjustableMounting plate +/-2mm
Height Adjustment +/-2mm
Screw-on or readyfor Euro screws
10.5Pre-mounted 10.5mmexpanding dowels
14
ST 110/90
18mm Cranking
• Opening angle 110 deg.• Drilling diam. for hinge cup 35mm• Drilling depth 11.5mm• Hinge on plate mounting system ST Side
Adjusment+3/-1mm
HeightAdjusment+2/-2mm
DepthAdjusment+5/-1.5mm
Mounting details
Cup Type
Item Number
Item Number
Item Number
Interaxis
45mm
45
9.5
35
48mm
48
6
35
Interaxis
52mm
52
5.5
35
Interaxis
13
o
Drawings show application on D=0mm thick mounting
LH3ON25
Drawings show application on D=3mm thick mounting
Mounting platedrilling distance
Legend: Machine insertion ready
Door Clearance Table
Fmin
v
K0.3
16 17 18 19 20 21
345
22
0.3
0.3
0.5
0.5
0.5
0.7
0.7
0.7
1.0
0.9
0.9
1.3
1.2
1.2
1.7
1.6
1.5
2.5
2.1
2.0
BLIND CORNER HINGE
PU = 100 PU = 200
PU = 200
PU = 200
BBiemel’sCabinet Hardware
5-2 Wittenberg Drive Canning Vale WATel 94552122 Fax 94553680
Suppliers of Quality Products
Showrooms5-2 Wittenberg Drive, Canningvale
Home Base Salvado Road, Subiaco Display- Colour Coordination Centre Level 1
Vinyl Doors
Lacquered Doors
DuropalLaminate
CernitaHandles
UltraglazeHi Gloss Doors
Timber Doors
OTHER DECORATIVE PRODUCTS
XtremeAluminium
Doors