Page 1 of 3
BHARAT PETROLEUM CORPORATION LIMITED MUMBAI REFINERY, MAHUL
MUMBAI – 400 074, INDIA
Central Procurement Organisation (Refineries)
SUBJECT : RATE CONTRACT FOR SUPPLY OF GATE, GLOBE & CHECK VALVES FOR BPCL -
MUMBAI REFINERY, BPCL - KOCHI REFINERY and NRL-NUMALIGARH
REFINERY.
REF : CRFQ NO. 1000246245; E-tender no.9009
DUE ON
04.01.2016 at 13:00 Hrs. (IST)
Page 2 of 3
1.0 INTRODUCTION :
Bharat Petroleum Corporation Limited (BPCL) – Central Procurement Organization
(Refineries) invites quotations for the “Rate Cont ract for supply of Gate, Globe & Check
Valves BPCL-Mumbai Refinery (MR), BPCL-Kochi Refinery (KR) and NRL-Numaligarh
Refinery Ltd (NRL)” through e-tendering platform under 3 (Three) part system
(i.e. Part 1 - Pre-Qualification Criteria, Part 2 - Techno-commercial/Un priced Bid & Part
3 - Priced Bid) for a period of Two years. Tender can be downloaded from any of the
following websites :
• E-procurement platform : https://bpcleproc.in
• BPCL Web : https://www.bharatpetroleum.in/tender/view-tenders.aspx → Select
Department → CPO (Refineries)
• Central Procurement Portal : http://eprocure.gov.in/cppp
2.0 INDEX :
The complete set of tender documents consist of the following:
Part No. Sr. No. Description Annexure
Part-1
1 PRE-QUALIFICATION CRITERIA (PQC) 1
2 PROFORMA FOR DECLARATION REGARDING HOLIDAY LISTING 2
3 INTEGRITY PACT AGREEMENT FORMAT - BPCL & NRL 3
4 PROFORMA FOR BANK GUARANTEE FOR EARNEST MONEY
DEPOSIT (EMD) 4
5 UN-PRICED BID
(To be selected ” QUOTED” OR “NOT-QUOTED” in e-proc urement portal) 5
Bidder to note that the Annexures 1 to 4 shall be uploaded scan copy duly filled in/duly
signed and stamped along with supporting documents and Annexures 5 shall be filled in
e-procurement portal in Part-1 (Pre-Qualification Criteria) section.
Part-2
6 SPECIAL PURCHASE CONDITIONS (SPC) 6
7 INSTRUCTIONS TO BIDDERS (ITB) 7
8 GENERAL PURCHASE CONDITIONS (GPC) - BPCL & NRL 8
9 COMMERCIAL QUESTIONNAIRE 9
10 APPLICABLE CHARGES, TAXES, DUTIES, FREIGHT ETC.
(To be filled in e-procurement portal) 10
11 TECHNICAL DEVIATION FORM 11
12 COMMENCIAL DEVIATION FORM 12
13 CEIL (TPI AGENCY) LIST OF OFFICES 13
14 BUSINESS RULES DOCUMENT FOR REVERSE AUCTION 14
15 LIST OF ITEMS WITH DESCRIPTION, BPCL-AES & EIL STANDARDS 15
16 BPCL SUPPLIER/ VENDOR ADVISORY ON ENVIRONMENTAL
CRITERIA 16
Bidder to note that the above Annexures duly filled in/duly signed and stamped along
with supporting documents shall be uploaded in Part -2 (Techno-commercial / Unpriced)
section. No prices shall be indicated in any of the above documents. Annexure-10 shall be
filled in e-procurement portal.
Part-3 17 PRICED BID FORMAT 17
Bidder to note that the prices shall be filled only in the e -procurement portal in Part-3
(Price Bid) section.
Page 3 of 3
3.0 CONTACT PERSONS
3.1 Please note that the tender enquiry is invited through e-tendering mode. In case
of any clarification regarding the tender, following are the contact persons:-
3.2 FOR E-TENDERING RELATED ISSUES:
If tenderers need some clarifications or are experiencing difficulties while
enrolling or while participating in this e-Tender, please E-Mail to the following
E-Mail ID along with the snapshots of the errors be ing faced to:
Ajay Nandangi.
e-Procurement Technologies Limited (Procure Tiger)
Contact : 022-27764464, 2553 3128, 7208726400
E-Mail: [email protected]
Satya narayan Behera
e-Procurement Technologies Limited (Procure Tiger)
Mobile no. - +91 90040 14223
Email ID - [email protected]
Contact Numbers +91 9099090830, +91 7940016816
3.3 FOR OTHER CLARIFICATIONS:
For any commercial clarifications regarding this RFQ, please contact:
Shri H.P. Panchal, Procurement Manager (CPO-R), BPCL – Mumbai Refinery,
Mahul, Mumbai. Tel no. 022-25524129. E-mail: panch [email protected]
Shri B.K. Basu, Procurement Leader-CPO (R), BPCL – Mumbai Refinery, Mumbai
Refinery, Mahul, Mumbai. Tel no.Tel. No.: 022-2553 3360.
E-mail: [email protected]
Important : All updates, amendments, corrigenda, due date extensions etc, (if any) will
be posted on the e-tendering portal / websites as and when required. There will not be
any publication of the same through newspapers or any other media.
Page 1 of 3
Annexure-1
PRE-QUALIFICATION CRITERIA
SUB : RATE CONTRACT FOR SUPPLY OF GATE, GLOBE, CHECK VALVES FOR BPCL - MUMBAI
REFINERY, BPCL - KOCHI REFINERY and NRL-NUMALIGARH REFINERY.
REF : CRFQ NO. 1000246245, E-tender no. 9009
Vendor Name : M/s. __________________________________ Location : ________________ Vendor Offer Ref. No.: _________________________________ Offer Date : ______________ Contact Person Name : ________________________ Mobile No. _______________________ E-mail ID : ___________________________________ Land line No. : ____________________
BIDDERS SHALL ESSENTAILLY HAVE TO COMPLY WITH THE FOLLOWING CRITERIA FOR BEING
ELIGIBLE FOR PARTICIPATING IN THIS TENDER.
SNO DETAILS VENDOR'S ACTION RESPONSE
1 FINANCIAL CRITERIA
1.1
Average annual turnover of the bidder during
last three financial years up to 2014-2015 shall
not be less than the value as given below :
a) For Bidder bidding only for Valve size 40
NB & less : Not less than Rs.30.00 lakhs
b) For Bidder bidding only for Valve size 50
NB & above : Not less than Rs.195.00 lakhs
c) For Bidder bidding for Valve size 40 NB &
less and Valve size 50 NB & above : Not
less than Rs.225.00 lakhs
Bidder is required to submit audited
Profit and Loss Account of last 3
financial years. Further, for bidder
who has not finalized their books of
accounts for the FY 2014-15,
evaluation of these criteria would be
done for the previous 3 financial
years ending 2013-14.
TO CONFIRM
AND SUBMIT
RELEVANT
DOCUMENTS
1.2
Net worth should be positive as per latest
audited Balance Sheet.
Bidder is required to submit latest
audited balance sheet.
TO CONFIRM
AND SUBMIT
RELEVANT
DOCUMENTS
Page 2 of 3
2 TECHNICAL CRITERIA
2.1
Bidder should be manufacturers of Gate,
Globe & Check Valves with manufacturing
facilities in India and should have capability of
manufacturing, testing and supply of Valves
required as per BPCL / EIL specification.
Bidder should quote based on the range of
their manufacturing sizes only.
Bidder is required to submit list of
machineries, catalogue / brochures
indicating their manufacturing and
testing facilities.
Bidder should confirm their
manufacturing size range.
TO CONFIRM
AND SUBMIT
RELEVANT
DOCUMENTS
2.2
The Bidder should have successfully executed
Purchase Orders for supply of Gate, Globe &
Check Valves to any Refinery / Petrochemical
/ Chemical / Fertilizer / Power / any
continuous process Industry directly or
through project consultant(s), in any of the 12
consecutive months period during preceding 3
years counting prior to tender due date and
shall not be less than the value as given below:
a) For Bidder bidding only for Valve size 40
NB & less : Not less than Rs.30.00 lakhs
b) For Bidder bidding only for Valve size 50
NB & above : Not less than Rs.195.00 lakhs
c) For Bidder bidding for Valve size 40 NB &
less and Valve size 50 NB & above : Not
less than Rs.225.00 lakhs
The order value criteria mentioned above can
be met through supplies against a maximum of
three purchase orders (for relevant sizes as
mentioned in a, b & c above), taken together
during the said period of 12 months.
The order value criteria mentioned above shall
be basic cost without taxes and duties.
Bidder is required to submit relevant
Purchase order copies and invoices /
Inspection Release Notes /
completion certificates or any other
such documents in proof of meeting
this requirement.
TO CONFIRM
AND SUBMIT
RELEVANT
DOCUMENTS.
&
TO FILL
ANNEXURE-1A
2.3
Bidder should have relevant ISO Certification
for their manufacturing processes and quality
management.
Bidder is requested to furnish copies
of valid ISO Certificates.
TO CONFIRM
AND SUBMIT
RELEVANT
DOCUMENTS
Signature : ___________________________
Name : ______________________________
Official Seal : _________________________
Page 3 of 3
Annexure-1A
SUB : RATE CONTRACT FOR SUPPLY OF GATE, GLOBE, CHECK VALVES FOR BPCL - MUMBAI
REFINERY, BPCL - KOCHI REFINERY and NRL-NUMALIGARH REFINERY.
REF : CRFQ NO. 1000246245, E-tender no. 9009
Details of Proof of meeting the Pre-Qualification Criteria S.No. 2.2. i.e. Purchase order copies and invoices submitted.
SR. NO. PO PLACED BY PO. NO. PO DATE INVOICE NO. INVOICE
DATE
INVOICE
AMOUNT
1
2
3
TOTAL VALUE OF INVOICES
(Signature of Vendor with Company seal)
Name of the Authorised Signatory :
Designation :
Date :
Annexure - 2
The Declaration should be produced on Vendor’s Letter Head.
PROFORMA OF DECLARATION OF HOLIDAY LISTING
In the case of a Proprietary Concern:
I hereby declare that neither I in the name of my Proprietary concern M/s. _______________________ which is submitting the accompanying Bid / Tender nor any other concern in which I am a proprietor nor in any partnership firm in which I am involved as a Managing Partner have been placed on holiday list declared by Bharat Petroleum Corporation Limited or its Administrative Ministry or any other Indian Government Public Sector Undertaking, except as indicated below: (Here given particulars of holiday listing and in absence thereof state “NIL”). In the case of a Partnership Firm
We hereby declare that neither we, M/s. ________________________________ submitting the accompanying Bid / Tender nor any partner involved in the management of the said firm either in his individual capacity or as proprietor of any firm or concern have or has been placed on holiday list declared by Bharat Petroleum Corporation Limited or its Administrative Ministry or any other Indian Government Public Sector Undertaking, except as indicated below: (Here given particulars of holiday listing and in absence thereof state “NIL”). In the case of Company
We hereby declared that we have not been placed on any holiday list declared by Bharat Petroleum Corporation Limited or its Administrative Ministry or any other Indian Government Public Sector Undertaking, except as indicated below: (Here given particulars of holiday listing and in absence thereof state “NIL”). It is understood that if this declaration is found to be false in any particular, Bharat Petroleum Corporation Limited or its Administrative Ministry, shall have the right to reject my / our bid, and, if the bid has resulted in a contract, the contract is liable to be terminated. Place: ____________ Signature of the Bidder______________
Date: ____________ Name of the Signatory_______________
Page 1
Page 1 of 5
Annexure-3
IINNTTEEGGRRIITTYY PPAACCTT
Between
BBhhaarraatt PPeettrroolleeuumm CCoorrppoorraattiioonn LLiimmiitteedd ((BBPPCCLL)) hheerreeiinnaafftteerr rreeffeerrrreedd ttoo aass ""TThhee PPrriinncciippaall"",,
AAnndd
…………………………………………………………………………………………….. hereinafter r eferred to as "The Bidder/
Contractor/ Supplier".
PPrreeaammbbllee
The Principal intends to award, under laid down org anization procedures, contract/s for Tender for
“RATE CONTRACT FOR SUPPLY OF GATE, GLOBE & CHECK VALVES FOR BPCL – MUMBAI REFINERY,
BPCL-KOCHI REFINERY and NRL-NUMALIGARH REFINERY” (CRFQ-1000246245, E-tender-9009) The
Principal values full compliance with all relevant laws and regulations, and the principles of economi c
use of resources, and of fairness and transparency in its relations with its Bidder/s, Contractor/s and
Supplier/s.
In order to achieve these goals, the Principal cooperates with the renowned international Non-
Governmental Organisation "Transparency International" (TI). Following TI's national and international
experience, the Principal will appoint an Independent External Monitor who will monitor the tender
process and the execution of the contract for compliance with the principles mentioned above.
Section 1 - Commitments of the Principal
(1) The Principal commits itself to take all measures necessary to prevent corruption and to
observe the following principles:
a) No employee of the Principal, personally or through family members, will in connection
with the tender, or the execution of the contract, demand, take a promise for or
accept, for himself/ herself or third person, any material or immaterial benefit which
he/she is not legally entitled to.
b) The Principal will, during the tender process, treat all Bidders with equity and reason.
The Principal will, in particular, before and durin g the tender process, provide to all
Bidders the same information and will not provide t o any Bidder confidential/
additional information through which the Bidder cou ld obtain an advantage in relation
to the tender process or the contract execution.
c) The Principal will exclude from the process all known prejudiced persons.
(2) If the Principal obtains information on the conduct of any of its employees which is a criminal
offence under the relevant Anti-Corruption Laws of India, or if there be a substantive
suspicion in this regard, the Principal will inform its Vigilance Office and in addition can initiate
disciplinary actions.
Page 2 of 5
Section 2 - Commitments of the Bidder/ Contractor/ Supplier
((11)) TThhee BBiiddddeerr// CCoonnttrraaccttoorr// SSuupppplliieerr ccoommmmiittss iittsseellff ttoo ttaakkee aallll mmeeaassuurreess nneecceessssaarryy ttoo pprreevveenntt
ccoorrrruuppttiioonn.. HHee ccoommmmiittss hhiimmsseellff ttoo oobbsseerrvvee tthhee ffoolllloowwiinngg pprriinncciipplleess dduurriinngg hhiiss ppaarrttiicciippaattiioonn iinn tthhee
tteennddeerr pprroocceessss aanndd dduurriinngg tthhee ccoonnttrraacctt eexxeeccuuttiioonn..
aa)) TThhee BBiiddddeerr// CCoonnttrraaccttoorr// SSuupppplliieerr wwiillll nnoott,, ddiirreeccttllyy oorr tthhrroouugghh aannyy ootthheerr ppeerrssoonn oorr ffiirrmm,, ooffffeerr,,
pprroommiissee oorr ggiivvee ttoo aannyy ooff tthhee PPrriinncciippaall''ss eemmppllooyyeeeess iinnvvoollvveedd iinn tthhee tteennddeerr pprroocceessss oorr tthhee
eexxeeccuuttiioonn ooff tthhee ccoonnttrraacctt oorr ttoo aannyy tthhiirrdd ppeerrssoonn,, aannyy mmaatteerriiaall oorr iimmmmaatteerriiaall bbeenneeffiitt wwhhiicchh hhee//sshhee
iiss nnoott lleeggaallllyy eennttiittlleedd ttoo,, iinn oorrddeerr ttoo oobbttaaiinn iinn eexxcchhaannggee,, aannyy aaddvvaannttaaggee ooff aannyy kkiinndd wwhhaattssooeevveerr
dduurriinngg tthhee tteennddeerr pprroocceessss oorr dduurriinngg tthhee eexxeeccuuttiioonn ooff tthhee ccoonnttrraacctt..
b) The Bidder/ Contractor/ Supplier will not enter with other Bidders into any
undisclosed agreement or understanding, whether formal or informal. This applies in
particular to prices, specifications, certifications, subsidiary contracts, submission or
non-submission of bids or any other actions to rest rict competitiveness or to
introduce cartelisation in the bidding process.
c) The Bidder/ Contractor/ Supplier will not commi t any offence under the relevant Anti-
Corruption Laws of India; further the Bidder/ Contr actor/ Supplier will not use
improperly, for purposes of competition or personal gain, or pass on to others, any
information or document provided by the Principal a s part of the business
relationship, regarding plans, technical proposals and business details, including
information contained or transmitted electronically .
d) The Bidder/ Contractor/ Supplier will, when presenting his bid, disclose any and all
payments he has made, is committed to, or intends to make to agents, brokers or any
other intermediaries in connection with the award of the contract.
(2) The Bidder/ Contractor/ Supplier will not insti gate third persons to commit offences outlined
above or be an accessory to such offences.
Section 3 - Disqualification from Tender Process and Exclusion from Future Contracts
IIff tthhee BBiiddddeerr,, bbeeffoorree ccoonnttrraacctt aawwaarrdd,, hhaass ccoommmmiitttteedd aa ttrraannssggrreessssiioonn tthhrroouugghh aa vviioollaattiioonn ooff SSeeccttiioonn 22 oorr
iinn aannyy ootthheerr ffoorrmm ssuucchh aass ttoo ppuutt hhiiss rreelliiaabbiilliittyy oorr ccrreeddiibbiilliittyy aass BBiiddddeerr iinnttoo qquueessttiioonn,, tthhee PPrriinncciippaall iiss
eennttiittlleedd ttoo ddiissqquuaalliiffyy tthhee BBiiddddeerr ffrroomm tthhee tteennddeerr pprroocceessss oorr ttoo tteerrmmiinnaattee tthhee ccoonnttrraacctt,, iiff aallrreeaaddyy
ssiiggnneedd,, ffoorr ssuucchh rreeaassoonn..
(1) If the Bidder/ Contractor/ Supplier has committed a transgression through a violation of
Section 2 such as to put his reliability or credibi lity into question, the Principal is also entitled
to exclude the Bidder/ Contractor/ Supplier from future contract award processes. The
imposition and duration of the exclusion will be de termined by the severity of the
transgression. The severity will be determined by the circumstances of the case, in particular
the number of transgressions, the position of the transgressors within the company hierarchy
of the Bidder and the amount of the damage. The exclusion will be imposed for a minimum of
6 months and maximum of 3 years.
Page 3 of 5
(2) A transgression is considered to have occurred if the Principal after due consideration of the
available evidences, concludes that no reasonable doubt is possible.
(3) The Bidder accepts and undertakes to respect and uphold the Principal's absolute right to
resort to and impose such exclusion and further accepts and undertakes not to challenge or
question such exclusion on any ground, including th e lack of any hearing before the decision
to resort to such exclusion is taken. This undertak ing is given freely and after obtaining
independent legal advice.
(4) If the Bidder/ Contractor/ Supplier can prove that he has restored/ recouped the damage
caused by him and has installed a suitable corrupti on prevention system, the Principal may
revoke the exclusion prematurely.
Section 4 - Compensation for Damages
(1) If the Principal has disqualified the Bidder fr om the tender process prior to the award
according to Section 3, the Principal is entitled to demand and recover from the Bidder
liquidated damages equivalent to Earnest Money Deposit/Bid Security.
(2) If the Principal has terminated the contract according to Section 3, or if the Principal is entitled
to terminate the contract according to Section 3, the Principal shall be entitled to demand and
recover from the Contractor/ Supplier liquidated damages equivalent to Security Deposit/
Performance Bank Guarantee.
(3) The Bidder agrees and undertakes to pay the said amounts without protest or demur subject
only to condition that if the Bidder/ Contractor/ S upplier can prove and establish that the
exclusion of the Bidder from the tender process or the termination of the contract after the
contract award has caused no damage or less damage than the amount of the liquidated
damages, the Bidder/ Contractor/ Supplier shall compensate the Principal only to the extent
of the damage in the amount proved.
Section 5 - Previous Transgression
(1) The Bidder declares that no previous transgression occurred in the last 3 years with any other
Company in any country conforming to the TI approach or with any other Public Sector
Enterprise in India that could justify his exclusio n from the tender process.
(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender
process or the contract, if already awarded, can be terminated for such reason.
Section 6 - Equal treatment of all Bidders/ Contractors/ Suppliers/ Subcontractors
(1) The Bidder/ Contractor/ Supplier undertakes to demand from all subcontractors a
commitment in conformity with this Integrity Pact, and to submit it to the Principal before
contract signing.
(2) The Principal will enter into agreements with identical conditions as this one with all Bidders,
Contractors/ Suppliers and Subcontractors.
Page 4 of 5
(3) The Principal will disqualify from the tender p rocess all Bidders who do not sign this Pact or
violate its provisions.
Section 7 - Punitive Action Against Violating Bidders/ Contractors/ Suppliers/ Subcontractors
IIff tthhee PPrriinncciippaall oobbttaaiinnss kknnoowwlleeddggee ooff ccoonndduucctt ooff aa BBiiddddeerr,, CCoonnttrraaccttoorr,, SSuupppplliieerr oorr SSuubbccoonnttrraaccttoorr,, oorr ooff
aann eemmppllooyyeeee oorr aa rreepprreesseennttaattiivvee oorr aann aassssoocciiaattee ooff aa BBiiddddeerr,, CCoonnttrraaccttoorr,, SSuupppplliieerr oorr SSuubbccoonnttrraaccttoorr
wwhhiicchh ccoonnssttiittuutteess ccoorrrruuppttiioonn,, oorr iiff tthhee PPrriinncciippaall hhaass ssuubbssttaannttiivvee ssuussppiicciioonn iinn tthhiiss rreeggaarrdd,, tthhee PPrriinncciippaall
wwiillll iinnffoorrmm tthhee VViiggiillaannccee OOffffiiccee..
Section 8 - Independent External Monitors
(1) The Principal has appointed competent and credible Independent External Monitors for this
Pact. The task of the Monitor is to review independently and objectively, whether and to what
extent the parties comply with the obligations unde r this agreement.
(2) The Monitor is not subject to instructions by t he representatives of the parties and performs
his functions neutrally and independently. He repor ts to the Chairperson of the Board of the
Principal.
(3) The Bidder/ Contractor/ Supplier accepts that the Monitor has the right to access without
restriction to all Project documentation of the Principal including that provided by the Bidder/
Contractor/ Supplier. The Bidder/ Contractor/ Suppl ier will also grant the Monitor, upon his
request and demonstration of a valid interest, unrestricted and unconditional access to this
project documentation. The same is applicable to Su bcontractors. The Monitor is under
contractual obligation to treat the information and documents of the Bidder/ Contractor/
Supplier/ Subcontractor with confidentially.
(4) The Principal will provide to the Monitor suffi cient information about all meetings among the
parties related to the Project provided such meetings could have an impact on the contractual
relations between the Principal and the Bidder/ Contractor/ Supplier. The parties offer to the
Monitor the option to participate in such meetings.
(5) As soon as the Monitor notices, or believes to notice, a violation of this agreement, he will so
inform the Management of the Principal and request the Management to discontinue or heal
the violation, or to take other relevant action. The Monitor can in this regard submit non-
binding recommendation. Beyond this, the Monitor ha s no right to demand from the parties
that they act in a specific manner, refrain from action or tolerate action. However, the
Independent External Monitor shall give an opportun ity to the Bidder/ Contractor/ Supplier to
present its case before making its recommendations to the Principal.
(6) The Monitor will submit a written report to the Chairperson of the Board of the Principal
within 8 to 10 weeks from the date of reference or intimation to him by the 'Principal' and,
should the occasion arise, submit proposals for cor recting problematic situations.
(7) If the Monitor has reported to the Chairperson of the Board a substantiated suspicion of an
offence under relevant Anti-Corruption Laws of India, and the Chairperson has not, within
reasonable time, taken visible action to proceed against such offence or reported it to the
Page 5 of 5
Vigilance Office, the Monitor may also transmit this information directly to the Central
Vigilance Commissioner, Government of India.
(8) The word 'Monitor' would include both singular and plural.
Section 9 - Pact Duration
This Pact begins when both parties have legally signed it. It expires for the Contractor/ Supplier 12
months after the last payment under the respective contract, and for all other Bidders 6 months after
the contract has been awarded.
If any claim is made/ lodged during this time, the same shall be binding and continue to be valid
despite the lapse of this pact as specified above, unless it is discharged/ determined by Chairperson of
the Principal.
Section 10 - Other Provisions
((11)) TThhiiss aaggrreeeemmeenntt iiss ssuubbjjeecctt ttoo IInnddiiaann LLaaww.. PPllaaccee ooff ppeerrffoorrmmaannccee aanndd jjuurriissddiiccttiioonn iiss tthhee
RReeggiisstteerreedd OOffffiiccee ooff tthhee PPrriinncciippaall,, ii..ee.. MMuummbbaaii.. TThhee AArrbbiittrraattiioonn ccllaauussee pprroovviiddeedd iinn tthhee mmaaiinn
tteennddeerr ddooccuummeenntt// ccoonnttrraacctt sshhaallll nnoott bbee aapppplliiccaabbllee ffoorr aannyy iissssuuee// ddiissppuuttee aarriissiinngg uunnddeerr
IInntteeggrriittyy PPaacctt..
(2) Changes and supplements as well as termination notices need to be made in writing. Side
agreements have not been made.
(3) If the Bidder/ Contractor/ Supplier is a partnership or a consortium, this agreement must be
signed by all partners or consortium members.
(4) Should one or several provisions of this agreement turn out to be invalid, the remainder of
this agreement remains valid. In this case, the parties will strive to come to an agreement to
their original intentions.
H. P. Panchal ……………… ……………
For the Principal For the Bidder/ Contractor/
Supplier
Place ……………… Witness 1 : ………………
(Signature/Name/Address)
Date ………………. Witness 2 : ………………
(Signature/Name/Address)
INTEGRITY PACT
NOTE TO BIDDER:
a. Proforma of Integrity Pact(enclosed) shall be returned by the Bidder(s) along with the bid documents (technical bid in case of 2 part bids), duly signed by the same Signatory who is authorised to sign the bid documents. All the pages of the Integrity Pact shall be duly signed. Bidder's failure to return the IP duly signed shall result in the bid not being considered for further evaluation.
b. If the Bidder has been disqualified from the tender process prior to the award of the contract in accordance with the provisions of the Integrity Pact, NRL shall be entitled to demand and recover from Bidder Liquidated Damages amount by forfeiting the EMD / Bid Security as per provisions of the Integrity Pact.
c. If the contract has been terminated according to the provisions of the Integrity Pact, or if NRL is entitled to terminate the contract according to the provisions of the Integrity Pact, NRL shall be entitled to demand and recover from Contractor / Supplier Liquidated Damages amount by forfeiting the Security Deposit / Performance Bank Guarantee as per provisions of the Integrity Pact.
d. Bidders may raise disputes / complaints, if any, with the Independent External Monitor(s) through telephone and email followed by written document or telephone and written document. However date of receipt of complaint shall be the date of receipt of signed written document only.
Name / address / e-mail ID / contact number(s) of Independent External Monitor appointed to oversee implementation of Integrity Pact Programme at NRL is mentioned below.
Name & Address of Independent External Monitors forMonitoring / Implementation of Integrity Pact.
Prof. Ashoke Kumar Dutta, 50 Jatin Das Road, KOLKATA - 700029Mobile- 91-9433096675 Landline- 033-24666625 Email: [email protected]
INTEGRITY PACT
Between
Numaligarh Refinery Limited (NRL) hereinafter referred to as "The Principal", And
……………………………………………………..hereinafter referred to as "The Bidder/Contractor/Supplier"
Preamble
The Principal intends to award, under laid down organization procedures,
contract/s for ……………………………………………………………………..The
Principal values full compliance with all relevant laws and regulations, and the
principles of economic use of resources, and of fairness and transparency in
its relations with its Bidder/s, Contractor/s and Supplier/s.
In order to achieve these goals, the Principal cooperates with the renowned international Non-Governmental Organisation "Transparency International" (TI). Following TI's national and international experience, the Principal will appoint an Independent External Monitor who will monitor the tender process and the execution of the contract for compliance with the principles mentioned above.
Section 1 - Commitments of the Principal
(1) The Principal commits itself to take all measures necessary to prevent corruption and to observe the following principles:
a) No employee of the Principal, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for himself/herself or third person, any material or immaterial benefit which he/she is not legally entitled to.
b) The Principal will, during the tender process, treat all Bidders with equity and reason. The Principal will, in particular, before and during the tender process, provide to all Bidders the same information and will not provide to any Bidder confidential / additional information through which the Bidder could obtain an advantage in relation to the tender process or the contract execution.
c) The Principal will exclude from the process all known prejudiced persons.
(2) If the Principal obtains information on the conduct of any of its employees which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, the Principal will inform its Vigilance Office and in addition can initiate disciplinary actions.
Page 1 of 6
Section 2 - Commitments of the Bidder / Contractor/Supplier
(1) The Bidder / Contractor/Supplier commits itself to take all measures necessary to prevent corruption. He commits himself to observe the following principles during his participation in the tender process and during the contract execution.
a) The Bidder / Contractor/Supplier will not, directly or through any other person or firm, offer, promise or give to any of the Principal's employees involved in the tender process or the execution of the contract or to any third person, any material or immaterial benefit which he/she is not legally entitled to, in order to obtain in exchange, any advantage of any kind whatsoever during the tender process or during the execution of the contract.
b) The Bidder / Contractor/Supplier will not enter with other Bidders into any undisclosed agreement or understanding, whether formal or informal. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or any other actions to restrict competitiveness or to introduce cartelisation in the bidding process.
c) The Bidder / Contractor/Supplier will not commit any offence under the relevant Anti-Corruption Laws of India; further the Bidder / Contractor/Supplier will not use improperly, for purposes of competition or personal gain, or pass on to others, any information or document provided by the Principal as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.
d) The Bidder / Contractor/Supplier will, when presenting his bid, disclose any and all payments he has made, is committed to, or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract.
(2) The Bidder / Contractor/Supplier will not instigate third persons to commit offences outlined above or be an accessory to such offences.
Section 3 - Disqualification from tender process and exclusion from future contracts
If the Bidder, before contract award, has committed a transgression through a violation of Section 2 or in any other form such as to put his reliability or credibility as Bidder into question, the Principal is entitled to disqualify the Bidder from the tender process or to terminate the contract, if already signed, for such reason.
Page 2 of 6
(1) If the Bidder/Contractor/Supplier has committed a transgression through a violation of Section 2 such as to put his reliability or credibility into question, the Principal is also entitled to exclude the Bidder / Contractor/Supplier from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder and the amount of the damage. The exclusion will be imposed for a minimum of 6 months and maximum of 3 years.
(2) A transgression is considered to have occurred if the Principal after due consideration of the available evidences, concludes that no reasonable doubt is possible.
(3) The Bidder accepts and undertakes to respect and uphold the Principal's absolute right to resort to and impose such exclusion and further accepts and undertakes not to challenge or question such exclusion on any ground, including the lack of any hearing before the decision to resort to such exclusion is taken. This undertaking is given freely and after obtaining independent legal advice.
(4) If the Bidder / Contractor/Supplier can prove that he has restored / recouped the damage caused by him and has installed a suitable corruption prevention system, the Principal may revoke the exclusion prematurely.
Section 4 - Compensation for Damages
(1) If the Principal has disqualified the Bidder from the tender process prior to the award according to Section 3, the Principal is entitled to demand and recover from the Bidder liquidated damages equivalent to Earnest Money Deposit/Bid Security.
(2) If the Principal has terminated the contract according to Section 3, or if the Principal is entitled to terminate the contract according to Section 3, the Principal shall be entitled to demand and recover from the Contractor/Supplier liquidated damages equivalent to Security Deposit / Performance Bank Guarantee.
(3) The Bidder agrees and undertakes to pay the said amounts without protest or demur subject only to condition that if the Bidder / Contractor/Supplier can prove and establish that the exclusion of the Bidder from the tender process or the termination of the contract after the contract award has caused no damage or less damage than the amount of the liquidated damages, the Bidder / Contractor/Supplier shall compensate the Principal only to the extent of the damage in the amount proved.
Page 3 of 6
Section 5 - Previous Transgression
(1) The Bidder declares that no previous transgression occurred in the last 3 years with any other Company in any country conforming to the TI approach or with any other Public Sector Enterprise in India that could justify his exclusion from the tender process.
(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.
Section 6 - Equal treatment of all Bidders / Contractors /Suppliers/ Subcontractors
(1) The Bidder/Contractor/Supplier undertakes to demand from all subcontractors a commitment in conformity with this Integrity Pact, and to submit it to the Principal before contract signing.
(2) The Principal will enter into agreements with identical conditions as this one with all Bidders, Contractors/Suppliers and Subcontractors.
(3) The Principal will disqualify from the tender process all Bidders who do not sign this Pact or violate its provisions.
Section 7 – Punitive Action against violating Bidders / Contractors / Suppliers/Subcontractors
If the Principal obtains knowledge of conduct of a Bidder, Contractor, Supplier or Subcontractor, or of an employee or a representative or an associate of a Bidder, Contractor, Supplier or Subcontractor which constitutes corruption, or if the Principal has substantive suspicion in this regard, the Principal will inform the Vigilance Office.
Section 8 - Independent External Monitors
(1) The Principal has appointed competent and credible Independent External Monitors for this Pact. The task of the Monitor is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement.
(2) The Monitor is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairperson of the Board of the Principal.
Page 4 of 6
(3) The Bidder/Contractor/Supplier accepts that the Monitor has the right to access without restriction to all Project documentation of the Principal including that provided by the Bidder/Contractor/Supplier. The Bidder/Contractor/Supplier will also grant the Monitor, upon his request and demonstration of a valid interest, unrestricted and unconditional access to this project documentation. The same is applicable to Subcontractors. The Monitor is under contractual obligation to treat the information and documents of the Bidder/Contractor/Supplier/ Subcontractor with confidentially.
(4) The Principal will provide to the Monitor sufficient information about all meetings among the parties related to the Project provided such meetings could have an impact on the contractual relations between the Principal and the Bidder/Contractor/Supplier. The parties offer to the Monitor the option to participate in such meetings.
(5) As soon as the Monitor notices, or believes to notice, a violation of this agreement, he will so inform the Management of the Principal and request the Management to discontinue or heal the violation, or to take other relevant action. The Monitor can in this regard submit non-binding recommendation. Beyond this, the Monitor has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the Independent External Monitor shall give an opportunity to the Bidder/Contractor/Supplier to present its case before making its recommendations to the Principal.
(6) The Monitor will submit a written report to the Chairperson of the Board of the Principal within 8 to 10 weeks from the date of reference or intimation to him by the 'Principal' and, should the occasion arise, submit proposals for correcting problematic situations.
(7) If the Monitor has reported to the Chairperson of the Board a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairperson has not, within reasonable time, taken visible action to proceed against such offence or reported it to the Vigilance Office, the Monitor may also transmit this information directly to the Central Vigilance Commissioner, Government of India.
(8) The word 'Monitor' would include both singular and plural.
Section 9 - Pact Duration
This Pact begins when both parties have legally signed it. It expires for the Contractor/Supplier 12 months after the last payment under the respective contract, and for all other Bidders 6 months after the contract has been awarded.
If any claim is made / lodged during this time, the same shall be binding and continue to be valid despite the lapse of this pact as specified above, unless it is discharged / determined by Chairperson of the Principal.
Page 5 of 6
Section 10 - Other provisions
(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the Registered Office of the Principal, i.e. Guwahati. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.
(2) Changes and supplements as well as termination notices need to be made in writing. Side agreements have not been made.
(3) If the Bidder/Contractor/Supplier is a partnership or a consortium, this agreement must be signed by all partners or consortium members.
(4) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.
……………………… …………………………… For the Principal For the Bidder/Contractor/ Supplier
Place ……………… Witness1:………………… (Signature/Name/Address)
Date ………………. Witness2:….……………… (Signature/Name/Address)
Page 6 of 6
Annexure 4
(This PBG should be produced on non-judicial paper of appropriate value along with PQ Bid.)
PROFORMA FOR BANK GUARANTEE FOR EARNEST MONEY DEPOSIT
To
Bharat Petroleum Corporation Ltd.
(CPO) Refineries
Mumbai Refinery, Mahul
MUMBAI 400074
Dear Sirs,
M/s. ______________________________________ have taken tender for the supply of __________________
for Bharat Petroleum Corporation Ltd.The tender Conditions of Contract provide that the Bidder shall pay a sum
of Rs. ______ (Rupees_____________________________________________________________________)
as earnest money / initial / full security deposit in the form therein mentioned. The form of payment of earnest
money / security deposit includes guarantee executed by Schedule ‘A’ Bank, undertaking full responsibility to
indemnify Bharat Petroleum Corporation Ltd. in case of default.
The said______________________________________ have approached us and at their request and in
consideration of the premises we__________________________________________________________
______________having our office at have agreed to give such guarantee as hereinafter mentioned.
1. We___________________________________________________________________ hereby undertake
and agree with you that if default shall be made by M/s. _____________________________________ in
performing any of the terms and conditions of the tender or in payment of any money payable to Bharat
Petroleum Corporation Ltd. We shall on demand pay to you in such matter as to you may direct the said
amount of Rupees_______________________________only or such portion thereof not exceeding the
said sum as you may from time to time require.
2. You will have the full liberty without reference to us and without effecting this guarantee postpones for any
time or from time to time the exercise of any of the powers and rights conferred on you under the contract
with the said_____________and to enforce or to for bear from endorsing any power of rights or by reason
of time being given to the said which under law relating to the sureties would but for provision have the
effect of releasing us.
3. Your right to recover the said sum of Rs.__________________(Rupees__________________
____________________) from us in manner aforesaid will not be affected or suspended by reason of the
fact that any dispute or disputes have been raised by the said M/s.__________________
_________________and/or that any dispute or disputes are pending before any officer, tribunal or court.
4. The guarantee herein contained shall not be determined or affected by the liquidation or winding up,
dissolution or change of constitution or insolvency of the said______________
____________________but shall in all respects and for all purposes be binding operative units payment of
all money due to you in respect of such liabilities is paid.
5. Our liability under this guarantee is restricted to Rupees__________________________________ Our
guarantees shall remain in force until_____________________________________________ unless a suit
or action to enforce a claim under_________________________________________ Guarantee is filed
against us within six months from _____________________________(which is date of expiry of
guarantee) all our rights under the said guarantee shall be forfeited and shall be relieved and discharged
from all liabilities thereunder.
6. We have power to issue this guarantee in your favour under Memorandum and Articles of Association and
the undersigned has full power to do under the Power of Attorney dated __________________granted to
him by the Bank.
Yours faithfully
___________________________________________ Bank by its Constituted Attorney Signature of a person
duly authorised to sign on behalf of the bank.
Annexure – 5
SUB : RATE CONTRACT FOR SUPPLY OF GATE, GLOBE AND CHECK VALVES
FOR BPCL-MUMBAI REFINERY, BPCL-KOCHI REFINERY AND NRL-
NUMALIGARH REFINERY.
REF : CRFQ NO. 1000246245, E-tender No. 9009
UN-PRICED BID.
Bidders are requested to select
“QUOTED” or “NOT QUOTED” in our e-procurement portal.
Annexure- 5
RFQ Sr.
No.Material Short Text OUn
BPCL-MR
Two Years
QTY
BPCL-KR
Two Years
QTY
NRL Two
Years QTY
Total Two
Years Qty.
Unit Price
in Figures
(Rs.)
Unit Price in Words
(Rs.)
1 77.11.01.491.5 VLV CHK THD 800# CS Tr13CR 15NB PC 100 0 0 100
2 77.11.01.491.7 VLV CHK TH 800# CS TR13CR 15NB EA 0 100 0 100
3 77.11.01.496.5 VLV CHK THD 800# CS Tr13CR 20NB PC 64 0 0 64
4 77.11.01.496.7 VLV CHK TH 800# CS TR13CR 20NB EA 0 60 0 60
5 77.11.01.497.7 VLV CHK S 800# CS TR13CR 20NB EA 0 10 0 10
6 77.11.01.501.5 VLV CHK THD 800# CS Tr13CR 25NB PC 24 0 0 24
7 77.11.01.506.5 VLV CHK THD 800# CS Tr13CR 40NB PC 24 0 0 24
8 77.11.03.492.5 VLV CHK SW IBR 800# CS TrCS/ST 15NB PC 68 0 0 68
9 77.11.03.498.5 VLV CHK SW IBR 800# CS TrCS/ST 20NB PC 42 0 0 42
10 77.11.03.501.5 VLV CHK SW 800# CS TrCS/ST 25NB PC 22 0 0 22
11 77.11.03.502.5 VLV CHK SW IBR 800# CS TrCS/ST 25NB PC 40 30 0 70
12 77.11.03.503.5 VLV CHK SW CAS 800# CS TrCS/ST 25NB PC 0 8 0 8
13 77.11.03.507.5 VLV CHK SW IBR 800# CS TrCS/ST 40NB PC 20 30 0 50
14 77.11.05.491.5 VLV CHK SW 800# CS Tr316 15NB PC 8 0 0 8
15 77.11.05.501.7 VLV CHK SW 800# SS SS316 25NB EA 0 12 0 12
16 77.11.07.496.5 VLV CHK SW 800# CS Tr13CR 20NB PC 144 0 10 154
17 77.11.10.491.5 VLV CHK SW H2 800# CS TrCS/ST 15NB PC 0 10 0 10
18 77.11.10.496.5 VLV CHK SW H2 800# CS TrCS/ST 20NB PC 0 10 0 10
19 77.11.10.501.7 VLV CHK SW H2 800# CS TRCS/ST 25NB EA 0 10 0 10
20 77.11.10.506.7 VLV CHK SW H2 800# CS TRCS/ST 40NB EA 0 20 0 20
21 77.20.62.286.7 VLV GATE FL IBR 300# CS TR13CR 40NB EA 0 30 0 30
22 77.21.60.519.7 VLV GATE SCRD 800# CS TR13CR 20NB EA 0 10 0 10
23 77.21.61.514.5 VLV GATE SW 800# CS Tr13CR/ST 15NB PC 258 0 0 258
24 77.21.61.515.5 VLV GATE SW 800# CS TrCS/ST 15NB PC 2 12 100 114
25 77.21.61.519.7 VLV GATE SW IBR 800# CS TR13CR/ST 20NB EA 0 700 0 700
26 77.21.61.520.5 VLV GATE SW 800# CS TrCS/ST 20NB PC 128 720 100 948
27 77.21.61.521.5 VLV GATE SW IBR 800# CS TrCS/ST 20NB PC 8 140 100 248
28 77.21.61.524.5 VLV GATE SW IBR 800# CS TrCS/ST 25NB PC 0 10 50 60
29 77.21.61.525.5 VLV GATE SW IBR 800# CS Tr13CR/ST 25NB PC 48 0 0 48
30 77.21.61.526.5 VLV GATE SW 800# CS Tr13CR/ST 25NB PC 64 0 0 64
31 77.21.61.527.5 VLV GATE SW 800# CS TrCS/ST 25NB PC 0 40 0 40
32 77.21.61.532.5 VLV GATE SW 800# CS TrCS/ST 40NB PC 2 140 20 162
33 77.21.61.533.5 VLV GATE SW IBR 800# CS TrCS/ST 40NB PC 2 80 30 112
34 77.21.63.519.7 VLV GATE SW H2 800# CS TR13CR/ST 20NB EA 0 40 0 40
35 77.21.63.520.7 VLV GATE SW IBR 800# CS TR13CR/ST 15NB EA 0 700 0 700
36 77.21.63.526.5 VLV GATE SW H2 800# CS TrCS/ST 25NB EA 2 0 0 2
37 77.21.65.513.5 VLV GATE THD BB IBR 800# CS Tr13CR 15NB PC 324 1800 0 2124
38 77.21.65.514.5 VLV GATE THD BB 800# CS Tr13CR 15NB PC 1068 0 0 1068
39 77.21.65.519.5 VLV GATE THD BB IBR 800# CS Tr13CR 20NB PC 132 900 0 1032
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
UN - PRICED BID
RATE CONTRACT FOR SUPPLY OF GATE, GLOBE AND CHECK VALVES FOR BPCL-MUMBAI REFINERY, BPCL-
KOCHI REFINERY AND NRL-NUMALIGARH REFINERY
REF : CRFQ No. :1000246245 (E-Tender no. 9009
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
Page 1 of 6
RFQ Sr.
No.Material Short Text OUn
BPCL-MR
Two Years
QTY
BPCL-KR
Two Years
QTY
NRL Two
Years QTY
Total Two
Years Qty.
Unit Price
in Figures
(Rs.)
Unit Price in Words
(Rs.)
40 77.21.65.520.5 VLV GATE THD BB 800# CS FRG Tr13CR 20NB PC 724 0 0 724
41 77.21.65.521.5 VLV GATE THD BB 800# CS Tr13CR 20NB PC 2 120 0 122
42 77.21.65.525.5 VLV GATE THD BB IBR 800# CS Tr13CR 25NB PC 40 520 0 560
43 77.21.65.526.5 VLV GATE THD BB 800# CS Tr13CR 25NB PC 292 0 0 292
44 77.21.65.531.5 VLV GATE THD BB 800# CS Tr13CR 40NB PC 2 0 0 2
45 77.21.67.513.5 VLV GATE SW HCP 800# CS Tr13CR 15NB PC 720 0 0 720
46 77.21.67.514.5 VLV GATE SW IBR 800# CS Tr13CR 15NB PC 882 0 0 882
47 77.21.67.520.5 VLV GATE SW IBR 800# CS Tr13CR 20NB PC 3340 0 0 3340
48 77.21.67.525.7 VLV GATE SW IBR 800# CS TR13CR 25NB EA 0 400 0 400
49 77.21.67.526.5 VLV GATE SW IBR 800# CS Tr13CR 25NB PC 1184 0 0 1184
50 77.21.67.532.5 VLV GATE SW IBR 800# CS Tr13CR 40NB PC 480 0 0 480
51 77.21.67.533.7 VLV GATE SW 800# CS TR13CR 40NB EA 0 150 0 150
52 77.21.70.519.5 VLV GATE SW 800# CS Tr SS304/ST 20NB PC 0 60 0 60
53 77.21.74.513.5 VLV GATE SW NA 800# CS TrCS/ST 15NB PC 0 40 40 80
54 77.21.74.531.5 VLV GATE SW NA 800# CS TrCS/ST 40NB PC 0 20 10 30
55 77.22.61.526.7 VLV GATE SW 800# CS 25NB EA 2 0 0 2
56 77.22.99.531.7 VLV GATE SW 800# CS 40NB EA 2 0 0 2
57 77.23.30.157.7 VLV GATE FL 150# SS TRSS304 40NB EA 0 24 0 24
58 77.24.27.519.5 VLV GATE SW 800# SS Tr316L/ST 20NB PC 16 0 0 16
59 77.24.28.513.7 VLV GATE SW 800# SS SS316 15NB EA 0 16 0 16
60 77.24.28.519.7 VLV GATE SW 800# SS SS316 20NB EA 0 12 10 22
61 77.24.35.521.5 VLV GATE SW -- 800# F5 Tr13CR 20NB PC 0 50 0 50
62 77.24.35.525.5 VLV GATE SW -- 800# F5 Tr13CR 25NB PC 36 0 0 36
63 77.24.35.526.7 VLV GATE SW/TH 800# F5 TR13CR 25NB EA 0 30 20 50
64 77.24.39.513.7 VLV GATE TH 800# F5 TR13CR 15NB EA 0 30 0 30
65 77.24.41.513.5 VLV GATE SW 800# SS Tr304/ST 15NB PC 2 20 0 22
66 77.24.41.519.5 VLV GATE SW 800# SS Tr304/ST 20NB PC 8 16 0 24
67 77.24.46.519.5 VLV GATE SW VAC 800# SS Tr321/ST 20NB PC 10 0 0 10
68 77.24.62.519.7 VLV GATE TH 800# F11 TR13CR 20NB EA 0 120 0 120
69 77.24.97.513.5 VLV GATE THD BB 800# 316 Tr316 15NB PC 4 12 0 16
70 77.31.01.507.7 VLV GLB TH 800# CS TR13CR 8NB EA 0 10 0 10
71 77.31.01.514.7 VLV GLB TH 800# CS TR13CR 15NB EA 0 80 0 80
72 77.31.03.525.7 VLV GLB TH 800# CS TR13CR 25NB EA 0 6 0 6
73 77.31.07.519.5 VLV GLB PT HCP 800# CS Tr13CR 20NB PC 4 0 0 4
74 77.31.07.521.5 VLV GLB PT SW IBR 800# CS Tr13CR 20NB PC 14 0 20 34
75 77.31.07.523.7 VLV GLB SW 800# CS TR13CR 20NB EA 0 80 0 80
76 77.31.07.524.5 VLV GLB SW 800# CS TR13CR IBR 20NB EA 0 4 0 4
77 77.31.07.525.5 VLV GLB PT THD 800# CS Tr13CR 25NB PC 10 0 0 10
78 77.31.07.526.5 VLV GLB PT HCP 800# CS Tr13CR 25NB PC 22 0 0 22
79 77.31.07.530.7 VLV GLB SW 800# CS TR13CR 25NB EA 0 20 0 20
80 77.31.09.513.5 VLV GLB PT SW IBR 800# CS TrCS/ST 15NB PC 2 2 40 44
81 77.31.09.514.5 VLV GLB PT SW IBR 800# CS 13CR/ST 15NB PC 66 0 0 66
82 77.31.09.515.5 VLV GLB PT SW 800# CS TrCS/ST 15NB PC 16 80 40 136
83 77.31.09.515.5 VLV GLB PT SW 800# CS TrCS/ST 15NB PC 18 0 0 18
84 77.31.09.519.5 VLV GLB PT SW IBR 800# CS TrCS/ST 20NB PC 2 70 40 112
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
Page 2 of 6
RFQ Sr.
No.Material Short Text OUn
BPCL-MR
Two Years
QTY
BPCL-KR
Two Years
QTY
NRL Two
Years QTY
Total Two
Years Qty.
Unit Price
in Figures
(Rs.)
Unit Price in Words
(Rs.)
85 77.31.09.521.5 VLV GLB PT SW 800# CS TrCS/ST 20NB PC 0 2 40 42
86 77.31.09.526.5 VLV GLB PT SW IBR 800# CS EIL 52022 25NB PC 2 2 40 44
87 77.31.61.525.7 VLV GLB SW H2 800# CS TR13CR 25NB EA 0 20 0 20
88 77.31.97.531.5 VLV GLB PT SW HCP 800# CS TrCS/ST 40NB PC 16 30 0 46
89 77.34.06.525.5 VLV GLB PT SW 800# Tr.SS316/ST 25NB EA 2 0 0 2
90 77.10.00.276.7 VLV CHK FLG 300# WC6 TR13CR 80NB EA 0 4 0 4
91 77.10.15.151.5 VLV CHK FLG CAS 150# CS Tr304 50NB PC 0 8 0 8
92 77.10.20.151.5 VLV CHK FLG 150# CS NRV Tr13CR 50NB PC 40 0 0 40
93 77.10.20.154.5 VLV CHK FLG 150# CS Tr13CR EIL53301 50NB PC 2 40 10 52
94 77.10.20.155.5 VLV CHK FLG 150# CS Tr13CR EIL53321 50NB PC 2 30 0 32
95 77.10.20.157.5 VLV CHK FLG -- 150# CS Tr13CR 80NB PC 34 20 0 54
96 77.10.20.160.5 *DNR*VLV CHK FLG 150# CS Tr13CR 80NB PC 2 0 10 12
97 77.10.20.161.5 VLV CHK FLG 150# CS NRV Tr13CR 100NB PC 44 0 10 54
98 77.10.20.162.5 VLV CHK FLG 150# CS Tr13CR 100NB PC 2 60 0 62
99 77.10.20.166.5 VLV CHK FLG 150# CS NRV Tr13CR 150NB PC 30 0 0 30
100 77.10.20.167.5 VLV CHK FLG 150# CS Tr13CR 150NB PC 2 10 4 16
101 77.10.20.171.5 VLV CHK FLG 150# CS NRV Tr13CR 200NB PC 16 0 0 16
102 77.10.20.173.5 VLV CHK FLG 150# CS Tr13CR 200NB PC 4 20 2 26
103 77.10.20.178.5 VLV CHK FLG 150# CS Tr13CR 250NB PC 4 10 2 16
104 77.10.20.185.7 VLV CHK FLG 150# CS TR13CR 300NB EA 0 10 0 10
105 77.10.20.240.7 VLV CHK FLG 150# CS -- 125NB EA 2 0 0 2
106 77.10.20.271.5 VLV CHK FLG 300# CS NRV Tr13CR 50NB PC 56 0 0 56
107 77.10.20.274.5 VLV CHK FLG 300# CS Tr13CR 50NB PC 2 50 4 56
108 77.10.20.276.5 VLV CHK FLG 300# CS NRV Tr13CR 80NB PC 4 0 0 4
109 77.10.20.280.5 VLV CHK FLG 300# CS Tr13CR 80NB PC 2 40 4 46
110 77.10.20.281.5 VLV CHK FLG 300# CS NRV Tr13CR 100NB PC 10 0 0 10
111 77.10.20.282.5 VLV CHK FLG 300# CS Tr13CR 100NB PC 2 20 0 22
112 77.10.20.287.5 VLV CHK FLG -- 300# CS Tr13CR 150NB PC 10 0 0 10
113 77.10.20.290.5 VLV CHK FLG 300# CS Tr13CR 150NB PC 2 6 0 8
114 77.10.20.292.5 VLV CHK FLG IBR 300# CS Tr13CR 200NB PC 6 4 0 10
115 77.10.20.299.5 VLV CHK FLG IBR 300# CS Tr13CR 100NB PC 4 4 0 8
116 77.10.20.300.5 VLV CHK FLG 300# CS Tr13CR 250NB PC 0 4 0 4
117 77.11.01.511.7 VLV CHK TH 800# CS TR13CR 50NB EA 0 20 0 20
118 77.13.51.287.5 VLV CHK FLG 300# C5 Tr13CR 50NB PC 8 0 0 8
119 77.13.51.293.5 VLV CHK FLG 300# C5 Tr13CR 80NB PC 4 0 0 4
120 77.13.51.311.5 VLV CHK FLG 300# C5 Tr13CR 200NB PC 4 0 0 4
121 77.13.52.276.5 VLV CHK FLG 300# C5 TrAS/ST 80NB PC 4 0 0 4
122 77.20.61.412.5 VLV GATE FL 600# CS TrCS/ST 50NB PC 2 20 0 22
123 77.20.61.416.5 VLV GATE FLG IBR 600# CS 13CR/ST 50NB PC 2 10 0 12
124 77.20.61.420.5 VLV GATE FL 600# CS TrCS/ST 80NB PC 0 2 0 2
125 77.20.61.424.5 VLV GATE FL 600# CS TrCS/ST 100NB PC 4 0 0 4
126 77.20.61.430.5 VLV GATE FL 600# CS TrCS/ST 150NB PC 4 0 0 4
127 77.20.61.431.5 VLV GATE FL IBR 600# CS TrCS/ST 150NB PC 2 2 0 4
128 77.20.62.162.5 VLV GATE FL 150# CS Tr13CR IBR 50NB PC 0 16 10 26
129 77.20.62.163.5 VLV GATE FL -- 150# CS Tr13CR 50NB PC 560 30 0 590
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
Page 3 of 6
RFQ Sr.
No.Material Short Text OUn
BPCL-MR
Two Years
QTY
BPCL-KR
Two Years
QTY
NRL Two
Years QTY
Total Two
Years Qty.
Unit Price
in Figures
(Rs.)
Unit Price in Words
(Rs.)
130 77.20.62.163.7 VLV GATE FL 150# CS TR13CR EIL 51394 50N EA 2 0 0 2
131 77.20.62.166.5 VLV GATE FL 150# CS Tr13CR 50NB PC 2 150 0 152
132 77.20.62.167.7 VLV GATE FL 150# CS TR13CR EIL 51301 50N EA 0 16 40 56
133 77.20.62.169.5 VLV GATE FL -- 150# CS Tr13CR 80NB PC 354 0 0 354
134 77.20.62.170.5 VLV GATE FL IBR 150# CS Tr13CR 80NB PC 2 0 0 2
135 77.20.62.172.5 VLV GATE FL 150# CS Tr13CR 80NB PC 2 1200 20 1222
136 77.20.62.173.5 VLV GATE FL IBR 150# CS Tr13CR 80NB PC 24 0 0 24
137 77.20.62.175.7 VLV GATE FL 150# CS TR13CR 100NB EA 0 400 0 400
138 77.20.62.176.5 VLV GATE FL -- 150# CS Tr13CR 100NB PC 452 0 0 452
139 77.20.62.177.5 VLV GATE FL 300# CS Tr13CR 100NB PC 154 0 10 164
140 77.20.62.178.5 VLV GATE FL 150# CS Tr13CR 100NB PC 0 300 20 320
141 77.20.62.182.5 VLV GATE FL -- 150# CS Tr13CR 150NB PC 400 0 0 400
142 77.20.62.183.5 VLV GATE FL 150# CS Tr13CR 150NB PC 0 150 20 170
143 77.20.62.188.5 VLV GATE FL -- 150# CS Tr13CR 200NB PC 200 0 0 200
144 77.20.62.189.5 VLV GATE FL 150# CS Tr13CR 200NB PC 2 50 10 62
145 77.20.62.193.5 VLV GATE FL -- 150# CS Tr13CR 250NB PC 80 0 0 80
146 77.20.62.197.5 VLV GATE FL IBR 150# CS Tr13CR 250NB PC 8 0 0 8
147 77.20.62.198.5 VLV GATE FL 150# CS Tr13CR 250NB PC 2 24 10 36
148 77.20.62.199.5 VLV GATE FL -- 150# CS Tr13CR 300NB PC 74 0 0 74
149 77.20.62.202.5 VLV GATE FL 150# CS Tr13CR 300NB PC 2 20 20 42
150 77.20.62.205.5 VLV GATE FL -- 150# CS Tr13CR 350NB PC 36 0 0 36
151 77.20.62.207.5 VLV GATE FL 150# CS Tr13CR 350NB PC 0 100 0 100
152 77.20.62.211.5 VLV GATE FL -- 150# CS Tr13CR 400NB PC 36 0 0 36
153 77.20.62.214.5 VLV GATE FL 150# CS Tr13CR 400NB PC 2 30 0 32
154 77.20.62.217.5 VLV GATE FL 150# CS Tr13CR 450NB PC 10 2 0 12
155 77.20.62.229.5 VLV GATE FL -- 150# CS Tr13CR 600NB PC 20 0 0 20
156 77.20.62.287.7 VLV GATE FL 300# CS TR13CR 50NB EA 0 70 0 70
157 77.20.62.288.5 VLV GATE FL -- 300# CS Tr13CR 50NB PC 340 10 0 350
158 77.20.62.290.5 VLV GATE FL IBR 300# CS Tr13CR 50NB PC 168 0 0 168
159 77.20.62.292.5 VLV GATE FL 300# CS Tr13CR 50NB PC 2 300 0 302
160 77.20.62.293.5 VLV GATE FL IBR 300# CS Tr13CR 80NB PC 90 10 10 110
161 77.20.62.294.5 VLV GATE FL -- 300# CS Tr13CR 80NB PC 100 20 0 120
162 77.20.62.296.5 VLV GATE FL 300# CS Tr13CR 80NB PC 2 250 10 262
163 77.20.62.299.5 VLV GATE FL IBR 300# CS Tr13CR 100NB PC 52 0 0 52
164 77.20.62.300.5 VLV GATE FL 300# CS Tr13CR 100NB PC 2 90 10 102
165 77.20.62.304.5 VLV GATE FL IBR 300# CS Tr13CR 100NB PC 0 0 10 10
166 77.20.62.305.5 VLV GATE FL IBR 300# CS Tr13CR 150NB PC 46 0 10 56
167 77.20.62.306.5 VLV GATE FL -- 300# CS Tr13CR 150NB PC 70 0 0 70
168 77.20.62.307.5 VLV GATE FL 300# CS Tr13CR 150NB PC 112 50 10 172
169 77.20.62.311.5 VLV GATE FL -- 300# CS Tr13CR 200NB PC 50 0 0 50
170 77.20.62.312.5 VLV GATE FL IBR 300# CS Tr13CR 200NB PC 12 0 0 12
171 77.20.62.315.5 VLV GATE FL 300# CS Tr13CR 200NB PC 2 10 0 12
172 77.20.62.317.5 VLV GATE FL -- 300# CS Tr13CR 250NB PC 16 10 0 26
173 77.20.62.319.5 VLV GATE FL 300# CS Tr13CR 250NB PC 2 4 0 6
174 77.20.62.323.5 VLV GATE FL -- 300# CS Tr13CR 300NB PC 16 0 0 16
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
Page 4 of 6
RFQ Sr.
No.Material Short Text OUn
BPCL-MR
Two Years
QTY
BPCL-KR
Two Years
QTY
NRL Two
Years QTY
Total Two
Years Qty.
Unit Price
in Figures
(Rs.)
Unit Price in Words
(Rs.)
175 77.20.62.890.5 VLV GATE FL IBR 300# CST Tr13CR 100NB EA 0 10 0 10
176 77.20.63.169.5 VLV GATE FL H2O 150# CS TrAL-BRZ 80NB PC 32 0 0 32
177 77.20.63.175.5 VLV GATE FL H2O 150# CS TrAL-BRZ 100NB PC 46 0 0 46
178 77.20.63.181.5 VLV GATE FL H2O 150# CS TrAL-BRZ 150NB PC 72 0 0 72
179 77.20.63.187.5 VLV GATE FL H2O 150# CS TrAL-BRZ 200NB PC 28 0 0 28
180 77.20.63.193.5 VLV GATE FL H2O 150# CS TrAL-BRZ 250NB PC 24 0 0 24
181 77.20.63.199.5 VLV GATE FL H2O 150# CS TrAL-BRZ 300NB PC 8 0 0 8
182 77.20.63.205.5 VLV GATE FL H2O 150# CS TrAL-BRZ 350NB PC 12 0 0 12
183 77.20.63.211.5 VLV GATE FL H2O 150# CS TrAL-BRZ 400NB PC 16 0 0 16
184 77.20.63.217.5 VLV GATE FL H2O 150# CS TrAL-BRZ 450NB PC 6 0 0 6
185 77.20.63.223.5 VLV GATE FL H2O 150# CS TrAL-BRZ 500NB PC 6 0 0 6
186 77.20.63.229.5 VLV GATE FL H2O 150# CS TrAL-BRZ 600NB PC 8 0 0 8
187 77.20.64.163.5 VLV GATE FL CAS 150# CS TrSS304 50NB PC 6 0 0 6
188 77.20.64.169.7 VLV GATE FL CAS 150# CS TRSS304 80NB PC 0 40 0 40
189 77.20.64.305.5 VLV GATE FL CAS 300# CS TrSS304 150NB PC 6 0 0 6
190 77.20.71.410.5 VLV GATE FL H2 600# CS TrCS/ST 50NB EA 2 0 0 2
191 77.20.90.295.5 VLV GATE FLG IBR 300# CS TrSS316 80NB EA 0 6 0 6
192 77.21.65.537.5 VLV GATE THD BB 800# CS Tr13CR 50NB PC 2 0 0 2
193 77.21.65.538.7 VLV GATE TH IBR 800# CS TR13CR 50NB EA 0 120 0 120
194 77.21.67.163.7 VLV GATE IBR 150# CS TR13CR 50NB EA 0 50 10 60
195 77.23.30.163.5 VLV GATE FL 150# SS TrSS304 50NB PC 2 20 0 22
196 77.23.55.169.5 VLV GATE FL 150# C5 TrAS/ST 80NB PC 2 30 0 32
197 77.23.55.299.5 VLV GATE FL 300# C5 TrAS/ST 100NB PC 4 10 0 14
198 77.23.56.287.5 VLV GATE FL -- 300# C5 Tr13CR 50NB PC 52 0 0 52
199 77.23.56.299.5 VLV GATE FL -- 300# C5 Tr13CR 100NB PC 20 0 0 20
200 77.23.56.311.5 VLV GATE FL -- 300# C5 Tr13CR 200NB PC 8 0 0 8
201 77.23.70.425.5 VLV GATE FLG IBR 600# CS TR13CR 100NB EA 2 0 0 2
202 77.30.20.163.5 VLV GLB PT 150# CS Tr13CR 50NB PC 44 0 0 44
203 77.30.20.165.5 VLV GLB PT 150# CS Tr13CR 50NB PC 2 12 6 20
204 77.30.20.169.5 VLV GLB PT 150# CS Tr13CR 80NB PC 20 0 0 20
205 77.30.20.171.5 VLV GLB PT 150# CS Tr13CR 80NB PC 2 12 0 14
206 77.30.20.175.5 VLV GLB PT 150# CS Tr13CR 100NB PC 10 0 0 10
207 77.30.20.177.5 VLV GLB PT150# CS Tr13CR EIL 52301 100NB PC 2 16 0 18
208 77.30.20.181.5 VLV GLB PT 150# CS Tr13CR 150NB PC 6 0 0 6
209 77.30.20.183.5 VLV GLB PT 150# CS Tr13CR 150NB PC 0 10 0 10
210 77.30.20.187.5 VLV GLB PT 150# CS Tr13CR 200NB PC 8 0 0 8
211 77.30.20.189.5 VLV GLB PT 150# CS Tr13CR 200NB PC 0 4 0 4
212 77.30.20.288.5 VLV GLB PT 300# CS Tr13CR 50NB PC 30 0 0 30
213 77.30.20.290.5 VLV GLB PT 300# CS Tr13CR 50NB PC 2 36 10 48
214 77.30.20.291.5 VLV GLB PT IBR 300# CS Tr13CR 50NB PC 2 8 10 20
215 77.30.20.293.5 VLV GLB PT 300# CS Tr13CR 80NB PC 2 0 0 2
216 77.30.20.295.5 VLV GLB PT 300# CS Tr13CR 80NB PC 0 12 0 12
217 77.30.20.296.5 VLV GLB PT IBR 300# CS Tr13CR 80NB PC 14 8 10 32
218 77.30.20.299.5 VLV GLB PT 300# CS Tr13CR 100NB PC 28 10 0 38
219 77.30.20.300.5 VLV GLB PT IBR 300# CS Tr13CR 100NB PC 4 0 0 4
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
Page 5 of 6
RFQ Sr.
No.Material Short Text OUn
BPCL-MR
Two Years
QTY
BPCL-KR
Two Years
QTY
NRL Two
Years QTY
Total Two
Years Qty.
Unit Price
in Figures
(Rs.)
Unit Price in Words
(Rs.)
220 77.30.20.301.5 VLV GLB PT 300# CS Tr13CR 100NB PC 2 6 0 8
221 77.30.20.306.5 VLV GLB PT 300# CS Tr13CR 150NB PC 10 0 0 10
222 77.30.27.412.5 VLV GLB PT 600# CS TrCS/ST 50NB PC 16 0 0 16
223 77.33.50.287.7 VLV GLB FLG 300# C5 TR13CR 50NB EA 0 8 0 8
224 77.33.50.299.7 VLV GLB FLG 300# C5 TR13CR 100NB EA 0 2 0 2
225 77.33.50.305.5 VLV GLB PT FLG 300# C5 TrAS/ST 150NB PC 4 0 0 4
226 77.33.51.287.5 VLV GLB PT FLG 300# C5 Tr13CR 50NB PC 4 0 0 4
227 77.33.51.293.5 VLV GLB PT FLG 300# C5 Tr13CR 80NB PC 8 0 0 8
228 77.33.51.299.5 VLV GLB PT FLG 300# C5 Tr13CR 100NB PC 8 0 0 8 QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
QUOTED / NOT QUOTED
Page 6 of 6
SPECIAL PURCHASE CONDITIONS Page 1 of 10
Annexure-6
BHARAT PETROLEUM CORPORATION LIMITED
Central Procurement Organisation (Refineries)
RATE CONTRACT FOR SUPPLY OF GATE, GLOBE AND CHECK VALVES FOR BPCL-MUMBAI
REFINERY, BPCL-KOCHI REFINERY AND NRL-NUMALIGARH REFINERY.
SPECIAL PURCHASE CONDITIONS
REF : CRFQ NO. 1000246245, E-tender No. 9009
1.0 INTRODUCTION
1.1 E-Bids in 3 (three) parts are invited for the tender for “RATE CONTRACT FOR SUPPLY OF
GATE, GLOBE AND CHECK VALVES FOR BPCL-MUMBAI REFINERY, BPCL-KOCHI REFINERY
AND NRL-NUMALIGARH REFINERY”, in complete accordance with tender documents
and its attachments. For more information on E-Procurement System followed by
BPCL, bidders are requested to refer Instruction to Bidders (ITB) document.
1.2 This is a Three Part Bid Tender, viz. Part 1 - Pre-Qualification Criteria, Part 2 -
Techno-commercial/Un-priced Bid & Part 3 - Priced Bid. The Bidders shall submit
details/ documents required for each type of Bid, as specified in the tender. Further,
bids of only those vendors whose offers are found acceptable in Part-1 shall be
considered for Part-2 opening and found acceptable in Part-2 shall be considered for
Part-3 opening for further evaluation. All documents/ Bids submitted shall be
digitally signed and sealed for authentication.
1.3 BPCL reserves the right to finalise the tender, based on the ‘Sealed Price Bid’
submitted by the qualified Bidders, OR by conducting ‘Reverse Auction’ (RA), with
only qualified bidders. The Bidders should submit t heir best prices in the ‘Sealed
Priced bid’. However it may be noted that in case BPCL opts for ’RA’, the ‘Sealed
Price Bid’ submitted by the Bidder shall not be opened. For conducting the RA, the
‘Opening / Start bid price’ and subsequent ‘Decrement value’ shall be specified by
BPCL, based on BPCL’s internal estimation process, prior to the RA. As a
prerequisite, all Bidders shall have to confirm their compliance with the ‘Business
Rule Document governing RA’ furnished in the tender.
1.4 To participate on tenders hosted by BPCL on e-procurement site, bidders are
required to have a digital certificate and do “Enrollment” (Register on site) by
creating one User Id on the above site. All prospective bidders are requested enroll
onto our e-tendering platform https://bpcleproc.in/ maintained by M/s.
E Procurement Technologies Limited, our authorised Service Provider for E-tendering.
SPECIAL PURCHASE CONDITIONS Page 2 of 10
2.0 SPECIAL TERMS AND CONDITIONS
2.1 Bidders should be manufacturers of the category of Gate, Globe and Check Valves
mentioned in RFQ, BPCL AES and EIL Specification and should quote based on their
manufacturing range only.
2.2 Please note that tender enquiry is for entering into a rate contract for a period of
24 months from the date of award of Contracts.
2.3 Purchase orders will be placed for the quantities actually required by us from time to
time, on the basis of contracted rates by our P&CS departments at Mumbai, Kochi
and Numaligarh Refineries, linking to the rate contracts. Needless to say, this
contract is without any firm commitment on quantities/ values.
2.4 The orders shall be released till last date of validity of the rate contract. Supplies
shall be effected for all the purchase orders placed during the contract period, at the
contracted rates, terms and conditions, even if the supply period extends beyond the
contract period.
2.5 Material, found defective due to poor workmanship/ not meeting the specification
will be rejected and shall be replaced free of cost.
2.6 Rates quoted shall remain firm till the execution of the contract period and no claims
for price escalation shall be entertained.
2.7 We reserve the right to enhance the total contract value, if required, keeping the
rates of individual items unchanged. The vendor is required to give their
confirmation in this regard.
2.8 We reserve the right to discontinue calling for supplies and terminate the rate
contract by giving 30 day notice in advance without giving any reason for
termination.
2.9 Items should be properly packed and sent, to avoid any damage to the consignment.
Supplied pipes should be properly protected with end caps to avoid any transit
damage.
2.10 Raw/ Solid wood packaging material of imported items has to be appropriately
treated and marked as per International Standard of Phytosanitary Measures (ISPM-
15") for material originating from the contracting countries to the International Plant
Protection Convention or the members of Food & Agriculture Organization. Material
from non-contracting parties would have to be accompanied by a phytosanitary
certificate of the treatment endorsed. The Custom Officer at Indian Port shall not
release the material without appropriate compliance of the above provisions w.e.f.
01.11.2004.
SPECIAL PURCHASE CONDITIONS Page 3 of 10
3.0 DEFINITIONS AND INTERPRETATIONS
3.1 Where any portion of the GPC is repugnant to or at variance with any provisions of
the SPC then, unless a different intention appears, the provisions of the SPC shall be
deemed to govern the provisions of the GPC and SPC provisions shall prevail to the
extent of such repugnancy, or variations exist.
3.2 In RFQ Documents unless otherwise stated specifically, the singular shall include the
plural and vice versa wherever the context so requires.
3.3 Notwithstanding the sub-division of the RFQ Documents into separate sections and
volumes every part of each shall be deemed to be supplementary to and
complementary of every other part and shall be read with and into the Agreement
so far as it may be practicable to do so.
3.4 All headings, subtitles and marginal notes to the c lauses of the GPC, SPC or to the
Specifications or to any other part of RFQ Document are solely for the purpose of
giving a concise indication and not a summary of the contents thereof, and they shall
never be deemed to be part thereof or be used in the interpretation or construction
thereof.
3.5 The terms fully capitalized and/or initial capitali zed shall be interchangeable and
shall have the meaning as assigned to fully capitalized term or initial capitalised
term.
3.6 In BIDDING documents at all such places where obligations are confined to
Purchaser alone such provision to read as ‘Purchaser’s obligation to the extent the
context so means/ requires.
4.0 SUPPLIER’S SCOPE
4.1 Supplier’s scope shall include but not limited to ( a) manufacturing of Items as per
tender technical specifications; (b) preparation of Quality Assurance / Quality control
programme; (c) Packing; and (d) Loading on truck/ trailer and transportation up to
site.
5.0 DURATION OF CONTRACT
5.1 Two years from the date of issue of LOA / Contract.
Vendors who will not accept for two years contract period, their offer may not be
considered for evaluation.
6.0 OFFER VALIDITY
6.1 Your offer should be valid for a period of 120 days from the final bid due date for
acceptance of rate contract and for 24 months thereof for acceptance the orders.
Non acceptance of offer up to validity period and 2 years contract are liable for
rejection.
SPECIAL PURCHASE CONDITIONS Page 4 of 10
7.0 APPLICABLE CHARGES, TAXES & DUTIES
7.1 You are requested to quote base rate, Packing and Forwarding Charges, Excise duty,
Sales Tax, Octroi including octroi service charges, entry tax and freight as applicable
separately. BPCL will furnish Form-‘C’ for the goods purchased.
7.2 All statutory levies, if applicable is payable extra by BPCL. However, any increase
/decrease in statutory levies on the date of delivery during the scheduled delivery
period on finished materials will be on BPCL's account. If the material is not supplied
within the scheduled delivery period, then any increase on excise duty/ sales tax/
other statutory levies will be on vendor's account.
7.3 The quoted base rate shall include all expenses towards all testing charges, PMI
testing etc. Third Party Inspection charges shall be indicated separately as detailed in
clause 8.0 given below.
8.0 THIRD PARTY INSPECTION
8.1 All material are subject to inspection by Third Party Inspection agency (TPI). BPCL
nominated third party Inspection agency will be M/s Certification Engineers
International Ltd. (CEIL) for all indigenous materi als. CEIL inspection charges shall be
borne by BPCL. Bidder shall note the distance between of bidder’s place of
Inspection/manufacturing facilities w.r.t. CEIL off ice/ Regional office. List of
offices/Regional offices is enclosed for your ready reference. Following fees shall be
indicated in Format of Taxes/Duties, TPI & Freight with reference to the distance
between them.
A) CEIL fees for distance within 100 Kms between of CEIL office/Regional office &
Bidders place of manufacturing/Inspection : 2.5% of Material basic value of P.O.
plus 12.36% service tax.
B) CEIL fees for distance beyond 100 Kms between of CEIL office/Regional office &
Bidders place of manufacturing/Inspection : 5.00% of Material basic value of
P.O. plus 12.36% service tax.
Vendor shall indicate percentage based on distance between of bidder’s place of
Inspection/ manufacturing facilities w.r.t . CEIL o ffice/ Regional office over here and
fees with reference to the above distance in Format of Taxes/ Duties, TPI & Freight.
Same shall be considered for price evaluation.
9.0 FIRM PRICES
9.1 The quoted Prices shall remain firm and fixed for the entire duration of contract and
in all respects and no escalation in prices on any account shall be admissible. Non-
acceptance of firm rates for entire duration of contract period is liable for rejection.
SPECIAL PURCHASE CONDITIONS Page 5 of 10
9.2 The basic price (i.e., Ex works price) of each item/ material code shall be the same
for all the locations. However, taxes and duties and freight charges may vary
depending on the supply location.
10.0 EVALUATION CRITERIA
10.1 Evaluation will be on item-wise Lowest Quote basis (Net effective cost) to BPCL.
BPCL reserves the right to enter into Rate Contract with one party or with more than
one party depending on the evaluation, at its discretion. All the items in the Price
bid format shall be considered for evaluation. BPCL reserves the right to place order
for all tendered items or part of the items. However individual tendered quantity for
the item shall be split only as per MSE policy.
11.0 PAYMENT
11.1 PAYMENT TERMS
100% payment shall be made within 30 days from date of receipt and acceptance of
materials at Site against submission of Performance Bank Guarantee (PBG) for 10%
of basic order value.
11.2 GENERAL
11.2.1 Excise duty, Service Tax and VAT shall be released only on receipt of Cenvatable /
Vatable copy of corresponding Invoice enabling availing of input credits by BPCL.
11.2.2 All payments shall be released within 30 days of receipt of invoice and all requisite
documents, i.e Material Test Certificates, Third Party Inspection release note,
Packing slips etc.
11.2.3 No initial advance payment along with order shall be made by BPCL against supplies.
If a supplier insists on the same, the offer shall be rejected.
12.0 DELIVERY SCHEDULE / COMPLETION PERIOD
12.1 Delivery Period : 12 weeks from the date of Call off / Purchase Order, on FOT Site
basis.
Delivery is the essence of contract. BPCL reserve the right to accept or reject offers
with delivery period not in line with BPCL requirement.
12.2 These schedules are for normal consignments. However, supplier shall arrange to
supply emergency requirements, if any, as per our request on priority.
12.3 Supplier’s prices should be on door delivery basis. Freight, Octroi or any such local
levies will have to be paid by vendor and the same will be reimbursed at actuals
against documentary proof.
12.4 The ordered items are to be delivered to the Refinery Warehouses at BPCL (Mahul,
Mumbai, Maharashtra), BPCL (Ambalamugal, Kochi, Kerala) and NRL (Golaghat,
Assam) respectively.
SPECIAL PURCHASE CONDITIONS Page 6 of 10
12.5 Failing to meet the delivery schedule/ completion period will be subject to Price
Reduction and/or other remedies available to the Purchaser as per RFQ Documents.
12.6 Date of LR/ GR shall be considered as date of delivery or date of receipt of material
at site shall be the date of delivery as specified in call-off / PO.
12.7 Suppliers shall quote firm freight charges in percentage of basic price up to
destination by road on freight pre-paid door delivery basis through bank approved
transporters for all cases.
Vendor has to quote freight charges in percentage only. Non acceptability of freight
charges in percentage is not acceptable and their offer stand commercially rejected.
12.8 Delay in receiving Invoices or failure of delay or failure in providing copies of
dispatch documents and any demurrage or wharfage or any loss resulting thereby
shall be borne by the vendor.
12.9 Supply of part quantities will be acceptable only at the discretion of BPCL. In all other
cases vendor shall supply the entire quantity as per purchase order at a time.
13.0 PRICE REDUCTION SCHEDULE
13.1 Applicable as per attached GPC.
14.0 DESPATCH INSTRUCTIONS
14.1 Following dispatch documents are required to be submitted by the Supplier
immediately after shipment is made.
• Commercial Invoice
• Inspection Release Note by Third Party Inspection Agency.
• LR / Challan
• Packing List
• Test Certificates (NDT reports, MTC, IBR etc.)
15.0 INSURANCE
15.1 Transit insurance shall be excluded from the supplier’s scope and, the same shall be
arranged by BPCL.
16.0 GENERAL PURCHASE CONDITIONS (GPC)
16.1 Attached General Purchase Conditions (GPC) shall be applicable for this contract.
17.0 GUARANTEE/ WARRANTY
17.1 The material shall be guaranteed for its design, good workmanship, size, capacity
and operation and satisfactory performance for a minimum period of 12 months
from the date of commissioning or 18 months from the date of dispatch whichever is
earlier.
SPECIAL PURCHASE CONDITIONS Page 7 of 10
18.0 QUALITY ASSURANCE / QUALITY CONTROL
18.1 PMI test is required and hence same to be included in the QAP. The Supplier shall
prepare a detailed quality assurance plan for the execution of contract for various
facilities, which will be mutually discussed and ag reed to.
18.2 The Supplier shall prepare a detailed quality assurance plan for the execution of
contract for various facilities, which will be mutually discussed and agreed to.
18.3 The Supplier shall establish document and maintain an effective quality assurance
system outlined in recognized codes.
18.4 The purchaser, while agreeing to a quality assurance plan shall mark the stages
where they would like to witness the tests; review any or all stages of work at shop
as deemed necessary for quality assurance.
18.5 No amendment in the specification will be entertained after placement of rate
contract.
18.6 The manufacturer has to supply valve’s bonnet with ‘Y’ type yoke construction with
sufficient head space for free movement of the gland pusher and flange.
19.0 SUBMISSION OF OFFER
19.1 You are requested to quote/fill your rates against each item and applicable taxes &
duties in the e-procurement portal only. You are requested not to alter the
sequence/ serial numbers of the material codes in the file.
19.2 Following documents are to be signed and stamped on each page and uploaded in
the E-tender portal:-
a. Signed, stamped and scanned copies of supporting documents for meeting
technical specifications,
b. Signed, stamped and scanned copy of Acceptance sheet available at the end of
Special Purchase Conditions (SPC), Instructions To Bidders (ITB) and Business
Rules Document for reverse auction.
c. Signed, stamped and scanned copy of all pages of General Purchase Conditions
(GPC).
d. Duly filled, signed, stamped and scanned copy of all pages of Integrity Pact
document, Proforma for Declaration regarding Holiday Listing, Commercial
Questionnaire and Advisory on environmental criteria.
e. Technical & Commercial Deviations if any, to the tender documents, by giving
reference to the clause nos in the Technical Deviation or Commercial Deviation.
19.3 Following documents are to be filled online in the E-tender portal:-
a. Duly select QUOTED or NOT QUOTED in the e-procurement portal in Part-1 i.e.
Pre-Qualification Criteria section.
b. Applicable charges, taxes, duties and freight for the tender in the e-procurement
portal in Part-2 i.e. Techno-Commercial un-priced bid section.
c. Unit prices in the price bid format in the e-procurement portal in Part-3 section
i.e. Price bid section. If bidder is not willing to quote for any item, they may
SPECIAL PURCHASE CONDITIONS Page 8 of 10
indicate clearly in un-priced bid as “NOT QUOTED” and enter “0” (ZERO) in online
price bid. Zero will be considered as not quoted and not considered for
evaluation.
19.4 If the bidder has submitted NOT QUOTED for any item/s in their technical bid and
subsequently after opening of Price bid, if same item/s found quoted, prices for the
said item/s will not be considered for price evaluation.
19.5 Offer submitted by Telex/ Telegraphic/ Fax/ E-Mail or Hard copy in sealed covers,
shall not be accepted.
19.6 Offers with precondition on minimum contract value/call off value or non-
acceptability of part order are not acceptable and their offer stand commercially
rejected.
19.7 BPCL shall not be responsible for any delay in uplo ading of offer.
19.8 Bidders to quote based on latest revision no. as per BPCL AES Standard.
20.0 TENDER OPENING
20.1 The deadline for bid submission is 13:00 Hrs on the due date mentioned. The bids
can be submitted in the e-procurement website up to the tender due date and time.
20.2 Part-1 i.e. Pre-Qualification Criteria (PQC) submitted online for the subject tender
will be opened on e-tendering platform on tender due date and time. Part-2 i.e.
Technical bids of only qualified bidders in PQC wil l be opened on e-tendering
platform. Part-3 i.e. priced Bid (if reverse auction not done) submitted online for the
subject tender will be opened on e-tendering platform of only qualified bidders in
Technical bids. Qualified bidders will be informed about the date and time for
opening of bids one day prior to bid opening date by e-mail. It may be noted that
technical and price bid opening can be witnessed by bidders on e-tender site or in
person at CPO-Refineries office. In case bidder wish to participate in person, they
can inform us the representative’s name, designation and mobile phone number, to
enable us to arrange for necessary visitor’s permission.
21.0 EARNEST MONEY DEPOSIT (EMD) :
21.1 Applicable for this tender. All Bidders except in the case of bidders eligible for
exemption under MSE Policy have to submit EMD in PQ bid as mentioned below:
a) For Bidder bidding only for Valve size 40 NB & less : EMD of Rs.1.0 lakh
b) For Bidder bidding only for Valve size 50 NB & above : EMD of Rs.2.5 lakhs
c) For Bidder bidding for Valve size 40 NB & less
and Valve size 50 NB & above : EMD of Rs.2.5 lakh
For further details refer “Instructions To Bidders (ITB)”.
SPECIAL PURCHASE CONDITIONS Page 9 of 10
22.0 INTEGRITY PACT (IP)
22.1 Proforma of Integrity Pact (IP) shall be returned by the Bidder/s along with the bid
documents, duly signed by the same signatory who is authorised to sign the bid
documents. For further details, kindly refer ITB document.
23.0 POLICY FOR HOLIDAY LISTING OF VENDORS IN BPCL:
23.1 The guidelines for holiday listing shall be applica ble as per web link given below: https://bharatpetroleum.in/pdf/holidaylistingpolicy final.pdf
SPECIAL PURCHASE CONDITIONS Page 10 of 10
BHARAT PETROLEUM CORPORATION LIMITED
Central Procurement Organisation (Refineries)
SUBJECT : RATE CONTRACT FOR SUPPLY OF GATE, GLOBE AND CHECK VALVES FOR BPCL -
MUMBAI REFINERY, BPCL - KOCHI REFINERY AND NRL – NUMALIGARH
REFINERY.
REF : CRFQ NO. 1000246245, E-tender No. 9009
ACCEPTANCE OF SPECIAL PURCHASE CONDITIONS
We, M/s. __________________________________________________ having office at
______________ read SPECIAL PURCHASE CONDITIONS and confirm our acceptance to all
the terms and conditions as mentioned herein in the document except for deviations
mentioned in the deviation form.
Deviations : YES / NO
(Bidder to tick)
If yes, same is mentioned in Annexure-8 i.e. TECHNICAL DEVIATION FORM and Annexure-9
i.e. COMMERCIAL DEVIATION FORM.
Date : Signature of Authorised Signatory
with Name & designation and Co. Seal.
Name & full address of the Firm :
M/s. _______________________
Instruction to Bidders Page 1 of 21
Annexure - 7
M/s BHARAT PETROLEUM CORPORATION LTD,
MAHUL MUMBAI
INSTRUCTIONS TO BIDDERS (ITB)
Instruction to Bidders Page 2 of 21
BHARAT PETROLEUM CORPORATION LIMITED
Central Procurement Organisation (Refineries)
INSTRUCTIONS TO BIDDERS (ITB)
1. INFORMATION ON E-PROCUREMENT SYSTEM
2. SCOPE OF BID
3. COST INCURRED FOR PREPARATION OF BIDDING DOCUMENTS
4. SITE VISIT
5. BIDDING DOCUMENT, CLARIFICATION AND AMENDMENT
6. LANGUAGE OF BID
7. EARNEST MONEY DEPOSIT (EMD) :
8. PRICE BIDS
9. BID CURRENCY
10. BID VALIDITY
11. OFFER WITHOUT ANY DEVIATION
12. AGENTS/ REPRESENTATIVES/ RETAINERS/ ASSOCIATES
13. CONFIDENTIALITY OF BID DOCUMENT
14. SIGNING OF BID
15. SUBMISSION OF BIDS
16. DEADLINE FOR SUBMISSION OF BID
17. MODIFICATION AND WITHDRAWAL OF BIDS
18. TENDER OPENING:
19. CONTACTING THE OWNER/ OWNER REPRESENTATIVE
20. EXAMINATION OF BIDS AND DETERMINATION OF RESPONSIVENESS
21. COMMERCIAL EVALUATION
22. ARITHMETIC CORRECTIONS
23. CONVERSION TO SINGLE CURRENCY
24. BID REJECTION CRITERIA
25. LOADING CRITERIA AND PRICE EVALUATION & COMPARISON.
26. EVALUATION CRITERIA FOR COMPARISON OF BIDS
27. THIRD PART INSPECTION SERVICES
28. AWARD OF CONTRACT :
29. PURCHASE PREFERENCE TO MSE’S:
30. INTEGRITY PACT (IP):
31. POLICY FOR HOLIDAY LISTING OF VENDORS IN BPCL:
32. SETTLEMENT OF DISPUTE BETWEEN GOVT. DEPT. / PUBLIC SECTOR UNDERTAKINGS
IN A PURCHASE OR SERVICE CONTRACT
33. ARBITRATION CLAUSE
34. GENERAL POINTS
Instruction to Bidders Page 3 of 21
INSTRUCTIONS TO BIDDERS (ITB)
1. INFORMATION ON E-PROCUREMENT SYSTEM
1.1. The bidder is requested to download the tender from BPCL’s e-tendering website
https://bpcleproc.in and participate in the tender as per the instructions given above and
herein, on or before the due date and time of the tender. The tender available on the BPCL
website can be downloaded for reading purpose only. For participation in the tender, please
fill up the tender online on the e-tender system available on https://bpcleproc.in.
1.2. For registration on the e-tender site https://bpcleporc.in, bidder needs to download the
Instructions to Vendors document from the site and read it. They shall select “Register” and
complete the “Bidder Registration Form” by filling in all the information correctly. Kindly
remember the login id (e-mail), password entered therein. After completing this process,
you will receive a system generated e-mail, click on the link and complete balance
Registration process.
1.3. As a pre-requisite for participation in the tender, bidders are required to obtain a valid
Digital Certificate of Class III and above as per Indian IT Act from the licensed Certifying
Authorities operating under the Root Certifying Authority of India (RCIA), Controller of
Certifying Authorities (CCA). The cost of obtaining the digital certificate shall be borne by the
Bidder. In case any Bidder so desires, he may contact our e-procurement service provider
M/s. E Procurement Technologies Limited, (Contact Number +91 9099090830, +91
7940016816) for obtaining the digital signature certificate. Please note that generally, it
takes 5 working days for obtaining a digital certificate after the submission of all required
documents / fees. Non availability of Digital Certificate shall be considered as the bidder’s
regret.
1.4. In case any corrigendum/amendment is issued after the submission of the bid by any
bidders, then such Bidders, who have submitted their bids, shall be intimated about the
corrigendum / amendment by a system-generated email. It shall be assumed that the
information contained therein has been taken into account by the Bidder. They have the
choice of making changes in their bid before the due date and time. No communication
other than the above will be circulated regarding Corrigendum / amendment, if any.
1.5. Bidders are required to submit their bid online on or before the due date and time of closing
of the tender as depicted in this document. Bidders shall have to log on to the website
(https://bpcleproc.in) for submitting their bid. Th e system time (Indian Standard Time - IST)
that will be displayed on e-Procurement web page shall be the time considered for
determining the expiry of due date and time of the tender and no other time shall be taken
into cognizance. Bidders are advised in their own interest to ensure that their bids are
submitted in e-Procurement system well before the closing date and time of bid. If the
Bidder intends to change/revise the bid already entered, he may do so any number of times
till the due date and time of submission deadline. However, no bid can be modified after the
deadline for submission of bids. Once the entire process of submission of online bid is
complete, the Bidders are required to go to option ‘own bid view’ through dashboard and
take the print of the envelope receipt as a proof of submitted bid.
1.6. Bids / Offers shall not be permitted in e-procurement system after the due date /time of
tender. Hence, no bid can be submitted after the due date and time of submission has
elapsed.
1.7. No manual bids / offers along with electronic bids / offers shall be permitted.
Instruction to Bidders Page 4 of 21
1.8. Once the PQ Bid / Technical (or) un-priced bids are opened, bidders can see the list of
Bidders who have participated in the bid by logging on to the portal under their user ID and
password and clicking on “Other Bids” view. Subsequently, in case the price bids are opened
in E Tendering platform, Bidders can see the rates quoted by all the participating bidders
using the same option.
1.9. No responsibility will be taken by BPCL and / or the e-procurement service provider for any
delay due to connectivity and availability of website. They shall not have any liability to
Bidders for any interruption or delay in access to the site irrespective of the cause. It is
advisable that Bidders who are not well conversant with e-tendering procedures, start filling
up the tenders much before the due date / time so that there is sufficient time available
with him/her to acquaint with all the steps and seek help if they so require. Even for those
who are conversant with this type of e-tendering, it is suggested to complete all the
activities ahead of time. It should be noted that the individual bid becomes viewable only
after the opening of the bid on/after the due date and time. Please be reassured that your
bid will be viewable only to you and nobody else ti ll the due date/ time of the tender
opening. The non-availability of viewing before due date and time is true for e-tendering
service provider as well as BPCL officials.
1.10. BPCL and/or the e-procurement service provider shall not be responsible for any direct or
indirect loss or damages and or consequential damages, arising out of the bidding process
including but not limited to systems problems, inability to use the system, loss of electronic
information etc.
1.11. In case of any clarification pertaining to e-procurement process, the Bidder may contact the
following agencies / personnel:
For system related queries contact:
Ajay Nandangi.
e-Procurement Technologies Limited (Procure Tiger)
Contact : 022-27764464, 2553 3128, 7208726400
E-Mail: [email protected]
Satya narayan Behera
e-Procurement Technologies Limited (Procure Tiger)
Mobile no. - +91 90040 14223
Email ID - [email protected]
Contact Numbers +91 9099090830, +91 7940016816
2. SCOPE OF BID
2.1. BPCL invites E-Bids in 2 or 3 parts as described in SPC, in complete accordance with
tender documents and its attachments.
2.2. SCOPE OF BID: The scope of work shall be as defined in the RFQ.
3. COST INCURRED FOR PREPARATION OF BIDDING DOCUMENTS
3.1. The bidder shall bear all costs associated with the preparation and submission of the
bid, and BPCL will in no case be responsible or liable for this cost, regardless of the
conduct or outcome of the bidding process.
Instruction to Bidders Page 5 of 21
4. SITE VISIT
4.1. Site visit/ Pre-bid meeting (if applicable) will be held on scheduled date(s) as
mentioned in SPC. All interested bidders are requested to reach the site in time. The
purpose of the pre- bid meeting is to clarify any doubts of the Bidders on the
interpretation of the provisions of tender. Bidder(s) are requested to submit their
queries, mentioning firm name, clause no. & clause by a letter/ e-mail to the
Engineer-in-charge in order to have fruitful discussions during the meeting. All
Bidders are requested to acquaint themselves for better clarity about the site and
tender conditions, before submitting their bids. Necessary clarifications (if any), may
be obtained prior to submission of the bid.
4.2. Bidders shall visit the location, at their own expense to see the site conditions before
quoting for the job. Bidders should contact Enginee r-in-charge for getting
information required for visiting the site locations well in advance. Bidders to obtain
all the information required for executing the contract from site. No request will be
entertained on this count even if bidders choose not to visit. No claim what so ever
may be shall be entertained on this ground.
5. BIDDING DOCUMENT, CLARIFICATION AND AMENDMENT
5.1. CONTENTS OF BIDDING DOCUMENT
5.1.1. The Bidding Document has been hosted on
a. E-procurement platform - https://bpcleproc.in;
b. www.bharatpetroleum.in→ Energizing Business→Tenders → CPO (Refineries) &
c. Central Procurement Portal - http://eprocure.gov.in/cppp.
5.1.2. The bidder is expected to examine BIDDING document, bidding guidelines receipt
from BPCL or available on BPCL website, all instructions, formats, terms,
specifications and drawings etc., enclosed in the BIDDING documents. The invitation
for bid (BIDDING) together with all its attachment thereto, shall be considered to be
read, understood and accepted by the bidder. Failure to furnish all information
required by the BIDDING documents or submission of a bid not substantially
responsive to the BIDDING documents in every respect will be at bidder’s risk and
may result in the rejection of the Bid.
5.2. CLARIFICATION ON BIDDING DOCUMENTS
5.2.1. A prospective bidder requiring any information or clarification of the BIDDING
documents, may notify in writing by e-mail/fax/post to the following :
Mr. B.K. Basu, Procurement Leader-CPO (R) / Mr. H.P. Panchal, Procurement
Manager-CPO (R) Bharat Petroleum Corp. Ltd., Admin Building, Mahul, Mumbai -400
074. Tel. No.: 022-2553 3360 / 022-2552 4129.
5.2.2. In the event of finding any discrepancies in or omissions from the Bid Documents, or
should the Bidder be in doubt as to the meaning of such documents, Bidder shall
immediately notify BPCL, either by facsimile or letter, as indicated above, who will
thereupon, if required, send necessary written instructions to all Bidders. Any such
request shall reach BPCL not later than seven (7) days prior to the ‘closing date” or
Tender Due date.
Instruction to Bidders Page 6 of 21
5.3. AMENDMENT OF BIDDING DOCUMENTS
5.3.1. At any time prior to the deadline for submission of bids, the Owner may, for any
reason, whether on its own requirement or in response to a clarification requested
by prospective bidders, modify the BIDDING documents by issuing addenda.
5.3.2. Any addendum thus issued shall be part of the BIDDING documents. The addendum
will be hosted on the BPCL e-procurement platform. All the bidders who have raised
the queries shall be informed by e-mail/ Fax/ Courier about the addendum for their
reference. Bidders have to take into consideration of all the addendum(s) /
corrigendum (s) / Due date extensions / clarifications issued/ web hosted, before
submitting the bid.
5.3.3. The Owner may, at their discretion, extend the date of submission of Bids in order to
allow the bidders a reasonable time to furnish their most competitive bid taking into
account the amendments issued.
6. LANGUAGE OF BID
6.1. The Bid prepared by the bidder, all correspondence/drawings and documents
relating to the bid exchanged by the bidder with the Owner shall be in English
Language. In case any printed literature furnished by the bidder may be written in
another language so long as accompanied by an English translation, in which case,
for the purpose of interpretation of the bid, the English translation shall govern.
6.2. In the event of submission of any document/ certificate by the Bidder in a language
other than English, the English translation of the same duly authenticated by
Chamber of Commerce of Bidder’s country shall be submitted by the Bidder. Metric
measurement system shall be applied.
7. EARNEST MONEY DEPOSIT (EMD) :
7.1. Requirement of EMD and value of EMD for this tender, bidder shall refer the Special
Purchase conditions of the tender.
7.2. Forfeiture of EMD - A tenderer who has submitted their bid shall not be permitted to
alter/ amend or withdraw the bid, not withstanding that the bid(s) has/ have not yet
been opened/ finalised. A tenderer who purports to alter/ modify withdraw their
offer after submission, within the validity of the offer shall be liable to have their
offer rejected and their EMD forfeited/encashed.
7.3. The Earnest Money deposited by successful tenderer shall be forfeited if the
successful tenderer fails to honour the offer terms prior to ordering and Contractual
terms after issuance of LOI/ PO.
7.4. Original DD / Banker’s Cheque / BG as the case may be, towards EMD, shall be sent
separately to DGM - CPO (R), Bharat Petroleum Corporation Limited, Mahul, Mumbai
400074. Offers received without scan copy of EMD (DD/ BG/ Valid NSIC
Certificate/MSE Certificate) in the e-tender and physically not received within 7 days
after “Part-1 Bid” opening date (as indicated in the NIT or corrigendum thereof) are
liable to be rejected.
Instruction to Bidders Page 7 of 21
7.5. For unsuccessful bidders, EMD may be returned after the completion of BQC evaluation/
Technical evaluation / Price bid evaluation as appl icable. However, in case of successful
bidder the EMD shall be released on receipt of performance bank guarantee.
7.6. Following categories of bidders are exempted from paying Earnest Money Deposit
(EMD) and Tender Fee, if any.
i. Units registered with National Small Industries Corporation (NSIC);
ii. Units falling under Micro & Small Enterprises (MSEs) category as defined under the
MSMED Act 2006.
The above are subject to the fulfilling of under mentioned conditions :
a) Units should be registered with National Small Scale Industrial Corporation
Limited (NSIC) or with any of the Authorities specified under the Public
Procurement Policy for MSE’s. (DIC/KVIC/KVIB/Coir Board/NSIC/Directorate of
Handicrafts and Handloom or any other body specified by Ministry of MSME.)
b) The Unit should be registered for the item tendered.
c) The monetary limit, if any, indicated in the registration certificate should cover
value of items ordered.
d) Registration Certificate is valid for a period at least up to validity of the offer.
e) Self-attested copy of valid relevant registration certificate should be submitted
in support.
f) Registration with DGS&D will not entitle a Tenderer to claim above exemption.
Units registered with National Small Industries Corporation (NSIC) or MSE subject to:
Such bidders must upload appropriate proof along with their "Bid", to show that
they are eligible for the exemption from EMD (application for registration as NSIC /
MSE or for renewal will not be acceptable), failing which such bid will be treated as
bid received without EMD and liable to be rejected.
Registration with DGS&D will not entitle the Bidder to claim exemption from
payment of EMD.
7.7. The permissible forms of Deposit are:
I. Bank Draft drawn on any nationalized/ scheduled bank in favor of Bharat
Petroleum Corporation Ltd. payable at Mumbai.
II. Bank Guarantee (BG) executed by any Scheduled Bank approved by Reserve
Bank of India as per the proforma. The BG shall remain valid for a period of six
months from the due date of opening the tender.
Standing Bank Guarantee in lieu of EMD to cover all contracts as per the proforma
enclosed may also be accepted in which case EMD may be based on the expected
total value of the contract. The validity period for these Bank Guarantees should be
one year.
Instruction to Bidders Page 8 of 21
Where the Bank Guarantees are accepted it should be ensured by the sponsoring
contracting department that:
I. Bank Guarantees are strictly in accordance with the proforma mentioned above.
(Slight deviations if any in BG format suggested by different banks, may be
accepted by Contracting Dept. Head , who will consult Legal, if felt necessary
II. A Bank Guarantee Register is to be maintained with necessary information such
as tender reference, Name of the tenderer, Name of the Bank, Guarantee
Number, Validity Period, Return Date etc. Prompt action is taken to renew the
Bank Guarantee whenever required.
III. As soon as the contractor commits any breach of the terms and conditions of
tender / contract, prompt action should be taken to realize the EMD from the
Bank.
8. PRICE BIDS
8.1. Prices shall be furnished strictly in the appropriate Price Schedule format(s) enclosed
with the bid document. Quoted prices shall be net of discount, if any. Conditional
discounts, if offered by a bidder, shall not be considered for evaluation.
8.2. Price quoted by the bidder shall remain firm & fixed until completion of the contract
and will not be subject to any variation, except statutory variation except statutory
variation in taxes, duties & levies pursuant to relevant provisions in Special Purchase
Conditions. BPCL shall reject a bid valid for a shorter period being non-responsive.
8.3. The bidder shall quote the price for item in the Price Schedule after careful analysis
of cost involved for the performance of complete work considering all parts of the
RFQ Documents. In case, any activity though specifically not covered but is required
to complete the work as per scope of work, scope of supply, specifications,
standards, drawings, GPC, SPC or any other part of RFQ Document, the prices quoted
shall deemed to be inclusive of cost incurred for such activity.
8.4. Owner will issue concessional form ‘C’ for CST only. No concessional form ‘D’ shall be
issued for VAT.
8.5. FOT despatch Point price of item including packing & forwarding, (such price to
include fabrication/ manufacturing of item, all costs as well as duties and taxes paid
or payable on components and raw materials incorporated or to be incorporated in
the goods, inspection testing etc.) but excluding applicable taxes and duties on
finished goods.
8.6. Supply price shall be exclusive of Excise Duty (including Cess) and CST (with
concessional form) or VAT (without concessional form) which will be applicable on
the finished goods.
8.7. Item wise Transportation Charges up to respective site exclusive of Service Tax and
Ed Cess thereon. Transit Insurance shall be arranged by Owner. If a supplier does not
quote freight charges, his offer shall be loaded with maximum freight charges as
quoted by the other bidders.
Instruction to Bidders Page 9 of 21
8.8. Site work Prices, if applicable, as per RFQ Documents, shall be exclusive of Service
Tax & inclusive of VAT on Work Contracts. All necessary taxes & duties and
registration, if required for carrying out the site activities shall be done by the bidder
and cost towards the same shall be included in quoted site work prices.
8.9. Foreign Bidders shall submit their prices on FOB –International Port of Exit basis. FOB
Prices quoted shall be inclusive of all applicable taxes, packing & forwarding etc.
applicable upto FOB – International Port of Exit.
9. BID CURRENCY
9.1. Bidding currency shall be Indian Rupees for Indian bidders and US Dollars / EUROs /
Indian Rupees for foreign bidders in accordance with RBI guidelines.
9.2. Currency once quoted will not be allowed to be changed. BPCL shall not be
compensating for any exchange rate fluctuation.
10. BID VALIDITY
10.1. The bid shall remain valid for acceptance for period mentioned in RFQ from the final
bid due date. BPCL shall reject a bid valid for a shorter period being non-responsive.
10.2. In exceptional circumstances, prior to expiry of the original bid validity period, BPCL
may request that the bidder extend the period of validity for a specified additional
period. The requests and the responses thereto shall be made in writing (by fax/
post/ e-mail).
11. OFFER WITHOUT ANY DEVIATION
11.1. BPCL will appreciate submission of offer based on the terms and conditions in the
enclosed SPC, GPC, ITB, Scope of Work, and Technical Specification etc. to avoid
wastage of time and money in seeking clarifications on technical/ commercial aspect
of the offer. Bids having any deviation to the RFQ Terms & Conditions may lead to
rejection of offer.
12. AGENTS/ REPRESENTATIVES/ RETAINERS/ ASSOCIATES
12.1. BPCL would prefer to deal directly with the manufacturers/ principals abroad
without involving any Indian agent. Agents/ representatives/ retainers/ associates
bids found at any stage of evaluation i.e. from un-priced bid opening till priced bid
opening shall be liable for rejection.
13. CONFIDENTIALITY OF BID DOCUMENT
13.1. The bidder shall not disclose any information conta ined in the bid document or
otherwise supplied in connection with this bid to a ny third party, except for the
purpose of preparing its bid and shall require any such third party to treat such
information as confidential.
13.2. After the opening of bids, information relating to the examination, clarification,
evaluation and comparison of bids and recommendations concerning to award of
contract shall not be disclosed to Bidders.
Instruction to Bidders Page 10 of 21
14. SIGNING OF BID
14.1. The Bid must contain the name, designation, residence and place of business of the
person or persons submitting the Bid, and must be signed and sealed by the Bidder
with his usual signature. The names of all persons signing should also be typed or
printed below their signature.
14.2. Satisfactory evidence of authority of the person signing on behalf of the Bidder shall
be furnished with the Bid.
14.3. The Bidder’s name stated in the Bid shall be the EXACT LEGAL NAME OF FIRM /
COMPANY / CORPORATION, etc. as registered or incorporated.
15. SUBMISSION OF BIDS
15.1. Bids should be submitted through e-tendering portal in 3 part bid system (i.e., "Pre-
Qualification Bid”, “Technical Bid" & "Priced Bid") OR in 2 part bid system, (i.e.,
“Prequalification and Techno-commercial bid” & "Priced Bid" as described in SPC, in
complete accordance with tender documents and its attachments.
15.2. Bidders are to note that in case of 2 part bid system tenders, all the documents
mentioned against “Pre-Qualification Bid” and “Technical Bid” as indicated above
shall be submitted along with “Technical Bid”.
15.3. "Pre-Qualification Bid” shall be complete with all the required documents uploaded
as given below.
a. All required documents as per PQ criteria
b. Scan Copy of EMD (Demand draft/ Bank Guarantee/ Valid NSIC
Certificate) or Registration/ Exemption Certificate (if any).
c. Performa of Holiday List to be submitted properly filled.
d. Contact details of Vendor duly filled, signed and s tamped.
e. Integrity Pact Document duly filled, signed and stamped on each page
f. Any other supporting documents/ information in support of the bid.
g. Un-Priced copy of Price Schedule with an indication “Quoted” or “Not-
Quoted” against each item. Please do not indicate prices in Un-Price Bid,
in cases where scan copies of un-priced bids are required to be uploaded.
15.4. "Technical Bid", i.e. Techno-Commercial Bid, shall be submitted with all technical
and commercial details (other than price). The sought details are to be duly filled in
E-tender portal OR uploaded as scanned copies with signatures and stamp of the
authorised signatory, as the case may be. The technical bid shall essentially contain
the following documents shall be submitted/ uploade d:-
a. The Techno-Commercial offer shall contain all technical Specifications, and
any other technical details you would like to inform BPCL on the subject job.
This shall also include the following documents.
b. Details of taxes and duties as per the format.
c. Technical & Commercial Deviations if any. These shall be indicated in the
format attached.
d. Any other supporting documents/ information in support of the Un-priced
Bid.
Instruction to Bidders Page 11 of 21
e. BPCL’s Special Purchase Conditions (SPC), duly signed and stamped as a token
of acceptance.
f. Acceptance, Compliance, Deviations and Exceptions: Bidders are requested
to have all their queries clarified before bidding. Bidders are required to
confirm and accept all the terms and conditions of the RFQ. However, if they
still have deviations from our RFQ and the attachments (GPC, SPC, ITB,
Commercial Questionnaire, etc.), they can indicate deviations in the Form
giving reference to clause no.
15.5. “Priced Bid” shall be complete with the Price Schedule duly filled in E-tender portal
OR uploaded as scanned copies with signatures and stamp of the authorised
signatory, as the case may be.
In case of scanned copy uploads, price bids shall be uploaded at appropriate
locations in E-tender portal, with seal and signatures on all pages. Quoted price for
each item shall be written in figures & words.
15.6. Bids complete in all respects should be submitted in BPCL E-tender portal on or
before the due date & time. All scanned copies of the documents submitted by the
bidder, shall be duly signed & stamped on all pages. The offer shall be submitted in
the Portal under the digital signature of the bidder.
15.7. All changes/ alterations/ corrections in the BID shall be signed in full by the person or
persons signing the Bid, with date, in case of scan copy upload. No erasure, use of
correction fluid and/ or overwriting is permitted. All blank spaces shall be filled in by
hand/ printed and, alterations or erasures, if any occur, shall be formally explained
over the signature of authorized representative. Non-compliance/ violation of this
requirement may be cause for the rejection of the Bid.
15.8. Offer submitted by Telex/ Telegraphic/ Fax/ E-Mail or Hard copy in sealed covers,
shall not be accepted.
15.9. BPCL shall not be responsible for any delay in uploading of offer due to unforeseen
delays/ problems in network. Bidders are requested to submit their offers well
before the due date and time to avoid any unforeseen problems with power supply
or network issues.
16. DEADLINE FOR SUBMISSION OF BID
16.1. The E-Bids must be submitted on or before the last date and time mentioned in the
RFQ.
16.2. BPCL may, in exceptional circumstances and at its discretion, on giving reasonable
notice by fax or any written communication to all prospective bidders who have
purchased the bid document extend the deadline for the submission of e-bids in
which case all rights and obligations of BPCL and b idders, previously subject to the
original deadline will thereafter be subject to deadline as extended.
17. MODIFICATION AND WITHDRAWAL OF BIDS
17.1. The Bidder may modify or withdraw their Bid after the Bid’s submission, in E-tender
platform, prior to the due date.
Instruction to Bidders Page 12 of 21
17.2. No bid shall be modified subsequent to the deadline for submission of bids.
17.3. No bid shall be allowed to be withdrawn in the interval between the deadline for
submission of bids and the expiration of the period of bid validity specified by the
bidder. Withdrawal of a bid during this interval shall result in the forfeiture of
bidder’s EMD and/ or holiday listing of such bidder s.
18. TENDER OPENING:
18.1. The deadline for bid submission as per due date mentioned. The bids can be
submitted in the e-procurement website upto the tender due date and time. The
Pre-qualification bids (in case of 3 part bids) and Technical bids (in case of 2 part
bids) will be opened online through e-procurement website https://bpcleproc.in, on
the same day.
18.2. Pre-qualification Bids: The Pre-qualification bids shall be opened on the due date
mentioned. Bidders, who have submitted their bids, can view/ witness the "Pre-
qualification Bid" opening through the e-portal. Th e offers of those bidder(s) whose
offer meet the Prequalification requirements, will only be considered for further
evaluation, while those not meeting the Pre-qualification criterion, will be rejected
without any clarification.
18.3. Technical Bids:- The Technical bids (Techno-Commercial Bid) of those bidder(s),
whose offers for "Pre-qualification Bid" are found to be acceptable, will only be
opened under advance intimation to them. Such Quali fied Bidders can view/ witness
the "Un-priced Bid" opening through the e-portal.
18.4. Price Bids:- The date and time of opening Price Bids shall be intimated separately to
the techno-commercially acceptable bidders and the price bids shall be opened
through e-portal. Such Techno-Commercially accepted bidders can view/ witness the
"Price Bids" opening through the e-portal.
19. CONTACTING THE OWNER/ OWNER REPRESENTATIVE
19.1. From the time of the bid opening to the time of the award, if any bidder wishes to
contact the Owner for any matter relating to the bid, it should done in writing.
19.2. Canvassing in any form by the Bidder or by any other Agency on behalf of the Bidder
after submission of the Bid may disqualify the said Bid. Any effort by a bidder to
influence BPCL in any manner in respect of bid evaluation in decisions concerning
award of contract will result in the rejection of that bid.
20. EXAMINATION OF BIDS AND DETERMINATION OF RESPONSIVENESS
20.1. BPCL will examine the bids to determine whether they are complete, whether any
computational errors have been made, whether the documents have been properly
signed, and whether the bids are generally in order.
20.2. Prior to the detailed evaluation, BPCL will determine whether each bid is of
acceptable quality, is generally complete and is responsive to the RFQ Documents.
For the purposes of this determination, a responsive bid is one that conforms to all
the terms, conditions and specifications of the RFQ Documents without deviations,
objections, conditionality or reservations.
Instruction to Bidders Page 13 of 21
20.3. As part of examination, evaluation and comparison of Bids, the Owner may at his
discretion, ask Bidders individually for clarification or call them for discussion of their
Bid.
20.4. For Techno-Commercial clarifications, bidders shall normally be given a cut off date
for furnishing clarifications. Clarifications received after the specified cut off date are
liable not to be considered for evaluation. Technical Query (TQ)/Commercial Query
(CQ) shall be issued to bidders through E-Mail/E Te ndering platform. Reply of TQ/CQ
shall also be received through E-Mail/E-Tendering platform.
20.5. Bidder shall not be allowed to submit any Price Implication or Revised Price after
submission of Bid, unless there is change in the stipulations of the RFQ Document
and such changes are incorporated through an Amendment. In case Exceptions and
Deviations submitted by Bidder along with Bid are not considered as acceptable and
no Amendment is issued, then in such a case the Bidders would be required to
withdraw such Exceptions/Deviations in favour of st ipulations of the RFQ document
and Bidders would not be eligible for submission of Price Implication/Revised Price,
failing which such Bid(s) shall be considered as no n responsive and rejected.
20.6. BPCL determination of a bid’s responsiveness is to be based on the contents of the
bid itself without recourse to extrinsic evidence. If a bid is not responsive, it will be
rejected by BPCL, and may not subsequently be made responsive by the bidder by
correction of the nonconformity.
21. COMMERCIAL EVALUATION
21.1. Bidders are required to quote firm prices as per the Price Schedule format for
submitting prices and show all taxes, duties and levies, cess etc. separately. Bids shall
be evaluated on the basis of landed cost at site considering eligible CENVAT/ input
tax credits as applicable. Applicable taxes and duties shall be indicated in the un-
priced copy of price format.
21.1.1. BPCL may claim Cenvat / input tax credits on taxes and duties as per the relevant
statutes in force and the credit on account of the same shall be considered for
evaluation. The bidders shall furnish the present rate of taxes and duties, applicable
for the tender separately as per format attached. Successful bidders shall furnish all
documents as required to enable BPCL to avail CENVAT/ input tax credit. Excise duty,
Service Tax and VAT shall be released only on receipt of Cenvatable / Vatable copy of
corresponding Invoice enabling availing of input credits by BPCL.
21.2. If the bidder in his quotation specifies that CST/ VAT is not applicable due to any
reason, the same shall be borne by bidder, if it becomes applicable any time during
the pendency of the contract.
21.3. Bidder has to quote freight charges including service tax, since cenvat credit on
service tax paid by the bidder may not be available to BPCL. In case bidder wish to
quote service tax separately and they can pass on the cenvat credit on service tax
paid can quote service tax on freight separately and this amount would be
considered as reduction in quoted price (landed price) while evaluating the bids,
subject to the following:
Instruction to Bidders Page 14 of 21
• Deduction would be to the extent of cenvat credit service tax available to the refinery.
• Bidder to confirm that Invoice in which freight is claimed will show this service
tax amount separately and also will mention the service tax registration number
under which this service tax is paid to the Govt.;
• While releasing payment after award of the order, the service tax amount as
mentioned above would be paid only if invoice showi ng the said amount and
service tax registration number is made available by the bidder.
If bidder failed to give proper documents to avail cenvat credit, Service tax on freight
claimed will not be paid.
21.4. Any Statutory variation in taxes and duties, within the contractual delivery date, shall
be on owner’s account, against submission of documentary evidence. However, in
case of delay in delivery beyond the contractual date, for reasons attributable to
seller, any increase in these rates shall be borne by seller, whereas any decrease
shall be passed on to the owner. BPCL shall take CENVAT benefit as applicable.
21.5. Any new or additional taxes/ duties and any increase in taxes/ duties imposed after
contractual delivery period shall be to supplier’s account, whereas any
corresponding decrease shall be passed on to the owner.
21.6. For the purpose of applicability of statutory variations on taxes and duties (including
imposition of any new taxes/duties/levies, etc.) under above terms, each staggered
delivery of lots (due in a specific month as per delivery schedule for bulk items) shall
be considered as delivery date for the respective lot(s).
21.7. Concessional rate of Custom Duty:
21.7.1. The bidder must ascertain and confirm along with supporting documents in the bid,
if any Customs Duty exemption / waiver is applicable to the products being supplied
by him under any multi-lateral / bi-lateral trade agreement between India and
bidder’s country.
21.7.2. The bidder shall be liable to provide all documentation to ensure availment of the
exemption/ waiver. In case the bidder defaults on this due to any reason,
whatsoever, he shall be liable to bear the incremental Customs Duty applicable, if
any.
21.7.3. Any Customs Duty applicability on account of any change in the bi-lateral/ multi-
lateral agreement shall be to bidder’s account.
21.7.4. Documentation to be furnished for availing the exemption/ waiver of Customs Duty
shall be specifically listed in the Letter of Credit also as the pre-requisite for release
of payment against shipping documents and this documentation shall necessarily
form a part of shipping documents.
21.8. Purchase Preferences as applicable shall be considered as per GPC.
21.9. In case bidder intend not to quote for certain item/ tags/ groups as applicable, then
the bidder shall mention “Not Quoted (NQ)” in respective cells of price schedule.
Wherever cell is found blank in the price schedule, then it shall be treated as “Not
Quoted (NQ)” and evaluation of bids shall be carried out accordingly.
Instruction to Bidders Page 15 of 21
22. ARITHMETIC CORRECTIONS
22.1. If there is correction/ wrong entry or a difference between the values entered in
figures and in words, the following procedure shall be adopted for evaluation:
a. When there is a difference between the rate in figures and in words for an item,
the rate which corresponds to the amount worked out by the Bidder for the item
based on the notional quantity specified, shall be taken as correct.
b. When the rate quoted by the Bidder in figures and words tallies but the amount
is incorrect, the rate quoted by the Bidder shall be taken as correct
c. When it is not possible to ascertain the correct rate as detailed above, the rate
quoted for the item in words shall be adopted as the quoted rate.
d. If the total amount written against an item does not correspond to the rate
written in figures and if the rate in words is not written by the bidder, then the
higher of the rates, i.e. higher of the rate worked out by dividing the amount by
the notional quantity and the rate quoted shall be considered for evaluation. In
the event that such a bid is determined as the lowest bid, the lower of the rates
shall be considered for ordering.
e. Any uncalled for lump sum/ percentage or adhoc reduction/ increase in prices,
offered by the Bidders after opening of the prices, shall not be considered.
However, if reduction is from the recommended Bidder, such reduction shall be
taken into account for arriving at the contract value.
f. If prices etc. are not filled up in the PRICED BID and are not as per the
requirements of the Bidding Document, the same shall be omitted from
evaluation.
23. CONVERSION TO SINGLE CURRENCY
23.1. Foreign vendors’ bids shall be compared on equivalent Indian Rupees basis
considering SBI TT Selling rate of foreign exchange published on the day of opening
of the Price Bids.
24. BID REJECTION CRITERIA:
24.1. The bidders shall adhere to the following provisions of the Bidding Document
without taking any deviations, failing which the Bid shall be considered to be non-
responsive and are liable to be rejected.
a. Defects liability period/ Guarantee Period.
b. Bids with Price Variation Clause (PVC) without variation formula and ceiling.
c. Insufficient validity period.
d. Advance payment
e. Non submission of EMD as applicable
f. Non submission of “Proforma for declaration regarding holiday listing”
g. Non submission of Integrity Pact
h. Any other rejection point specified elsewhere in the RFQ Documents.
Instruction to Bidders Page 16 of 21
25. LOADING CRITERIA AND PRICE EVALUATION & COMPARISON.
Bidders are requested to submit the offer in line with RFQ documents terms and
conditions. Any deviation on account of payment terms, non-acceptance of
Performance Bank Guarantee (PBG) and Price Reduction Schedule (PRS) clauses will
lead to loading of prices while evaluation.
26. EVALUATION CRITERIA FOR COMPARISON OF BIDS
a. Bids shall be evaluated on the basis of net effective price i.e. landed cost at Site
including third party inspection charges (if applicable) by BPCL minus CENVAT /
Set off benefit available to BPCL.
b. Commercial loading shall be done on FOT dispatch Po int price.
c. If a supplier does not quote freight charges or mentioned that freight extra, his
offer shall be loaded with maximum freight charges as quoted by the other
bidders.
d. Taxes/Duties: The taxes & duties will be cost loaded as applicable. However, if a
vendor states that the sales tax/ Excise Duty is not applicable at present or
quotes lesser percentage and will be charged as applicable at the time of
delivery, then such vendor’s price will be loaded by the highest rate as indicated
by the remaining vendors.
26.1. Where Indian as well as Foreign Bids are under comparison:
26.1.1. Domestic Bidders:
Bids shall be evaluated on the basis of net effective price i.e. landed cost at Site
including third party inspection charges (if applicable) by third party inspection
agency as nominated by BPCL minus CENVAT / Set off benefit available to BPCL.
26.1.2. Foreign Bidders :
Bids shall be evaluated on the basis of landed cost at Site including the charges of
inspection by third party inspection agency, all duties, taxes and transportation
charges as under less Cenvatable CVD/ SAD etc., Cenvatable service tax (if
applicable):
a) F.O.B. price quoted by the bidder (including stowage charges in case of pipes)
b) Ocean freight and marine insurance as under: Europe / Japan / Asia : 6% of FOB price
Australia / American Continent : 9% of FOB price
c) Prevailing rate of Customs duty calculated with Landing Charges @ 1% of CIF
Value
d) C.V.D. at prevailing rate. ED Cess on CVD, Special Additional duty, as
applicable
e) Port handling charges @ 2% of FOB value
f) Inland freight charges from Mumbai port(India) to project site(s) @2% of
landed cost, i.e., sl.no.(a )to (d)
g) Octroi charges as per prevailing rate, clearing charges etc.
Instruction to Bidders Page 17 of 21
h) In case of pipes, where the supplier has not indicated stowage charges, 0.6%
shall be loaded to the FOB price
i) Cenvat benefit available to BPCL shall be considered during price evaluation.
27. THIRD PART INSPECTION :
27.1. For all indigenous suppliers, BPCL will nominate authorised Third party Inspection
(TPI) agency. TPI charges for the same shall be paid directly to TPI agency by BPCL.
Suppliers are required to coordinate with the TPI agency for carrying out TPI
activities.
27.2. For imported items, the bidders quoted price shall include third party inspection
charges, which will be considered for evaluation of prices and included in the order
value at the time of award of order.
27.3. For requirement of TPI refer Special Purchase Conditions of the tender.
28. AWARD OF CONTRACT :
28.1. Prior to the expiring of the period of Bid validity prescribed by BPCL, BPCL will notify
the successful Bidder by Letter of Acceptance (LOA) / Purchase Order (PO) that his
Bid has been accepted. This notification of award shall contain the sum which BPCL
will pay to the successful bidder in consideration of the execution and completion of
the work as per Purchase order. BPCL will be the sole judge in the matter of award of
PO and the decision of BPCL will be final and bindi ng. Successful bidder shall duly
sign and stamp one copy of the LOA / PO as token of acceptance and return to BPCL
within 10 days from date of LOA / PO.
28.2. The notification of award will constitute the formation of contract. The successful
Bidder shall execute the requirements of a Purchase Order, which, among other
things, shall include, by reference, all the Sections and provisions of these Bid
Documents. The Purchase Order shall be signed by the duly authorized
representatives of the Bidder and BPCL.
29. Purchase Preference to MSE’s:
29.1. Bidders who are MSE’s and MSE’s owned by SC/ST shall be allowed purchase
preference as per the government guidelines/ instructions on the subject in force
from time to time.
29.2. Bidders claiming purchase preference as MSE need to submit the following
documents:
• Self-attested copy of all the pages of the EM-II certificate issued by the
appropriate authorities mentioned in the Public procurement policy of MSEs-
2012.; and
• Vendors declaration / affidavit in their Organization/Company Letter Head,
stating that, in the event of award of contract, all the ordered supplies shall be
made from the unit for which MSE certificate has been submitted.
Original of the EM-II certificate to be produced for verification, if called for (if the
bidder is not already registered with BPCL as MSE vendor).
Instruction to Bidders Page 18 of 21
30. INTEGRITY PACT (IP):
30.1. Proforma of Integrity Pact (IP) shall be returned by the Bidder/s along with the bid
documents, duly signed by the same signatory who is authorised to sign the bid
documents. All the pages of the Integrity Pact shall be duly signed, scanned and
uploaded along with other documents. Bidder's failure to upload the IP duly signed
along with bid documents shall result in the bid no t being considered for further
evaluation.
30.2. If the Bidder has been disqualified from the tender process prior to the award of the
contract in accordance with the provisions of the IP, BPCL shall be entitled to
demand and recover from Bidder Liquidated Damages amount by forfeiting the
EMD/ Bid Security as per provisions of IP.
30.3. If the contract has been terminated according to the provisions of the IP, or if BPCL is
entitled to terminate the contract according to the provisions of the IP, BPCL shall be
entitled to demand and recover from Contractor Liquidated Damages amount by
forfeiting the Security Deposit/Performance Bank Guarantee as per provisions of the
IP.
30.4. Bidders may raise disputes/complaints, if any, with the nominated Independent
External Monitor (IEM). The IEM's name, address & contact number is given below:
Shri. Shri. Brahm Dutt
Address : A-1/8 Safdarjung Enclave, New Delhi - 110 029.
E-mail : [email protected]
Mobile No. : 09871920282
31. POLICY FOR HOLIDAY LISTING OF VENDORS IN BPCL:
31.1. The guidelines for holiday listing shall be applica ble as per web link given below: https://bharatpetroleum.in/pdf/holidaylistingpolicy final.pdf
32. SETTLEMENT OF DISPUTE BETWEEN GOVT. DEPT. / PUBLIC SECTOR UNDERTAKINGS
IN A PURCHASE OR SERVICE CONTRACT :
32.1. In the event of any dispute or differences between the VENDOR / CONTRACTOR /
SUPPLIER and the OWNER, if the VENDOR /CONTRACTOR / SUPPLIER is a
Government Department, a Government Company or a undertaking in the public
sector, then in suppression of the provisions of clause 23 of the GPC (corresponding
clause no of GCC or NIT etc.), stands modified to the following extent:-
All disputes and differences of whatsoever nature arising out of or in relation to this
Contract / Agreement or in relation to any subsequent contract / agreement
between the parties shall be attempted to be resolved amicably by mutual
discussions between the parties. If they are not settled at the implementation level
of officers, then these unresolved disputes/ differences will be referred for
resolution by discussions with the concerned Director of BPCL and the concerned
Director of Vendor / Contractor / Supplier. In case same does not resolve the
difference within 30 days, arbitration clause as hereunder would apply.
In the event of any dispute or difference relating to the interpretation and
application of the provisions of the contracts, such dispute or difference shall be
referred by either party for Arbitration to the sole Arbitrator in the Department of
Public Enterprises to be nominated by the Secretary to the Government of India in-
charge of the Department of Public Enterprises. The Arbitration and Conciliation Act,
Instruction to Bidders Page 19 of 21
1996 shall not be applicable to arbitration under this clause. The award of the
Arbitrator shall be binding upon the parties to the dispute, provided, however, any
party aggrieved by such award may make a further reference for setting aside or
revision of the award to the Law Secretary, Department of Legal Affairs, Ministry of
Law & Justice, Government of India. Upon such reference the dispute shall be
decided by the Law Secretary or the Special Secretary/Additional Secretary, when so
authorized by the Law Secretary, whose decision shall bind the Parties finally and
conclusively. The Parties to the dispute will share equally the cost of arbitration as
intimated by the Arbitrator.
33. ARBITRATION CLAUSE:
GPC Arbitration clause is revised as below:
33.1. Any dispute or difference of any nature whatsoever, any claim, cross-claim, counter-
claim or set off of the Company against the Contractor or regarding any right,
liability, act, omission or account of any of the parties hereto arising out of or in
relation to this agreement shall be referred to and finally resolved by Sole Arbitrator,
who shall be appointed by Director (Refinery) of BPCL as per the procedure given in
sub-clause (b) given herein below.
33.2. Procedure for appointing the sole arbitrator: A party wishing to commence an
arbitration (the “Claimant”) shall file with the Di rector (Refinery) of BPCL a Notice of
Arbitration which shall comprise:
i. a demand that the dispute be referred to arbitration;
ii. a reference to the arbitration clause or the arbitration agreement that is invoked
and a copy of it;
iii. a reference to the contract out of or in relation to which the dispute arises and
where possible, a copy of it;
iv. a brief statement describing the nature and circumstances of the dispute,
specifying the relief claimed and, where possible, an initial quantification of the
claim amount.
v. any other details which the claimant wishes to refer and rely upon.
Upon receipt of the above notice of arbitration, the Director (Refinery) of BPCL shall
appoint the Sole Arbitrator as per the provisions of the Arbitration and Conciliation Act,
1996.
33.3. The venue of arbitration shall be Mumbai (in case of Mumbai Refinery) or Kochi (in
case of Kochi Refinery). The award of the arbitrator so appointed shall be final,
conclusive and binding on all parties to the agreement subject to the provisions of
the Arbitration & Conciliation Act, 1996 or any statutory modification or re-
enactment thereof and the rules made thereunder for the time being in force shall
apply to the arbitration proceedings under this clause.
33.4. The arbitrator shall have power to order and direct either of the parties to abide by,
observe and perform all such directions as the arbitrator may think fit having regard
to the matters in difference i.e. dispute, before him. The arbitrator shall have all
summary powers and may take such evidence oral and/or documentary, as the
arbitrator in his absolute discretion thinks fit and shall be entitled to exercise all
powers under the Indian Arbitration & Conciliation Act 1996 including admission of
any affidavit as evidence concerning the matter in difference i.e. dispute before him.
Instruction to Bidders Page 20 of 21
33.5. The parties against whom the arbitration proceedings have been initiated, that is to
say, the Respondents in the proceeding, shall be entitled to prefer a cross-claim,
counter claim or set off before the Arbitrator in respect of any matter in issue arising
out of or in relation to the Agreement without seeking a formal reference of
arbitration for such counter-claim, cross claim, or set off and the Arbitrator shall be
entitled to consider and deal with the same as if the matters arising therefrom has
been referred to him originally and deemed to form part of the reference made by
the Director(Refinery).
33.6. The arbitrator shall be at liberty to appoint, if necessary any accountant or
engineering or other technical person to assist him, and to act by the opinion so
taken.
33.7. The arbitrator shall have power to make one or more awards whether interim or
otherwise in respect of the dispute and difference and in particular will be entitled to
make separate awards in respect of claims of cross claims of the parties.
33.8. The arbitrator shall be entitled to direct any one of the parties to pay the costs to the
other party in such manner and to such extent as the arbitrator may in his discretion
determine and shall also be entitled to require one or both the parties to deposit
funds in such proportion to meet the arbitrators expenses whenever called upon to
do so.
33.9. The parties hereby agree that the courts in the city of Mumbai (in case of Mumbai
Refinery) or Kochi (in case of Kochi Refinery) alone shall have jurisdiction to entertain
any application or other proceedings in respect of anything arising under this
agreement and any award or awards made by the Sole Arbitrator hereunder shall be
filed (if so required) in the concerned courts in the city of Mumbai (in case of
Mumbai Refinery) or Kochi (in case of Kochi Refinery) only.
34. GENERAL POINTS:
34.1. BPCL reserves the right to extend due dates of tender, accept or reject any tender in
part or full, without assigning any reason whatsoever. BPCL also reserves its right not
to accept the lowest rates quoted by the bidders and also to give purchase
preference to Public Enterprises, as admissible under the existing policies of
Government of India and to JVs/ Subsidiaries as per BPCL guidelines.
34.2. Offers and all correspondence must be in English language only.
34.3. Any effort by bidder or bidder’s agents, consultant or representative, howsoever
described, to influence the owner in any way concerning scrutiny/ consideration/
evaluation/ comparison of the bid or decision concerning award of contract shall
entail rejection of the bid.
34.4. BPCL reserves the right to reject any or all the tenders without assigning any reasons
whatsoever. Also BPCL reserves the absolute right to reject any or all the
bids/tenders solely based upon the past unsatisfactory performance by the
bidder/bidders in BPCL, the opinion/ decision of BP CL regarding the same being final
and conclusive.
Instruction to Bidders Page 21 of 21
BHARAT PETROLEUM CORPORATION LIMITED
Central Procurement Organisation (Refineries)
SUBJECT : RATE CONTRACT FOR SUPPLY OF GATE, GLOBE AND CHECK VALVES FOR BPCL -
MUMBAI REFINERY, BPCL - KOCHI REFINERY AND NRL – NUMALIGARH
REFINERY.
REF : CRFQ NO. 1000246245, E-tender No. 9009
ACCEPTANCE OF INSTRUCTIONS TO BIDDERS
We, M/s. __________________________________________________ having office at
______________ read INSTRUCTIONS TO BIDDERS and confirm our acceptance to all the
terms and conditions as mentioned herein in the document except for deviations
mentioned in the deviation form.
Deviations : YES / NO
(Bidder to tick)
If yes, same is mentioned in Annexure-8 i.e. TECHNICAL DEVIATION FORM and Annexure-9
i.e. COMMERCIAL DEVIATION FORM.
Date : Signature of Authorised Signatory
with Name & designation and Co. Seal.
Name & full address of the Firm :
M/s. _______________________
Page 1 of 24
Annexure-8 Bharat Petroleum Corporation Limited
General Purchase Conditions
The following conditions shall be applicable for all procurement unless specifically
mentioned in the Special Purchase Conditions.
INDEX
1. DEFINITIONS
2. REFERENCE FOR DOCUMENTATION
3. RIGHT OF OWNER TO ACCEPT OR REJECT TENDER
4. LANGUAGE OF BID
5. PRICE
6. TAXES AND DUTIES
7. INSPECTION
8. SHIPPING
9. INDIAN AGENT COMMISSION
10. ORDER AWARD / EVALUATION CRITERIA
11. CONFIRMATION OF ORDER
12. PAYMENT TERMS
13. GUARANTEE/WARRANTY
14. PERFORMANCE BANK GUARANTEE
15. PACKING & MARKING
16. DELIVERY
17. UNLOADING AND STACKING
18. TRANSIT INSURANCE
19. VALIDITY OF OFFER
20. DELIVERY DATES AND PRICE REDUCTION SCHEDULE
21. RISK PURCHASE CLAUSE
22. FORCE MAJEURE CLAUSE
23. ARBITRATION CLAUSE
24. INTEGRITY PACT (IP)
25. RECOVERY OF SUMS DUE
26. CONFIDENTIALITY OF TECHNICAL INFORMATION
27. PATENTS & ROYALTIES
28. LIABILITY CLAUSE
29. COMPLIANCE OF REGULATIONS
30. REJECTION, REMOVAL OF REJECTED GOODS AND REPLACEMENT
31. NON-WAIVER
32. NEW & UNUSED MATERIAL
33. PURCHASE PREFERENCE CLAUSE
34. CANCELLATION
35. ANTI –COMPETITIVE AGREEMENTS/ABUSE OF DOMINANT POSITION
36. ASSIGNMENT
37. GOVERNING LAW
38. AMENDMENT
39. SPECIAL PURCHASE CONDITIONS
40 NOTICES
Page 2 of 24
Bharat Petroleum Corporation Limited
General Purchase Conditions
1. DEFINITIONS :
The following expressions used in these terms and conditions and in the purchase order
shall have the meaning indicated against each of these:
1.1. OWNER: Owner means Bharat Petroleum Corporation Limited (a Government of India
enterprise), a Company incorporated in India having its registered office at Bharat
Bhavan, 4 & 6 Currimbhoy Road, Ballard Estate, Mumbai 400038 and shall include its
successors and assigns (hereafter called BPCL as a short form).
1.2. VENDOR: Vendor means the person, firm or the Company / Corporation to whom this
Request for quotation (RFQ)/purchase order is issued and shall include its successors and
assigns.
1.3. INSPECTOR: Person/agency deputed by BPCL for carrying out inspection,
checking/testing of items ordered and for certifying the items conforming to the purchase
order specifications..
1.4. GOODS / MATERIALS: means any of the articles, materials, machinery, equipments,
supplies, drawing, data and other property and all services including but not limited to
design, delivery, installation, inspection, testing and commissioning specified or required
to complete the order.
1.5. SITE / LOCATION: means any Site where BHARAT PETROLEUM CORPORATION
LTD. desires to receive materials any where in India as mentioned in RFQ.
1.6. “RATE CONTRACT” means the agreement for supply of goods/ materials between
Owner and Vendor, for a fixed period of time (i.e till validity of Rate Contract, with no
commitment of contractual quantity) on mutually agreed terms and conditions. The actual
supply of goods/ materials shall take place only on issue of separate purchase orders for
required quantity as and when required by Owner.
1.7. “FIRM PROCUREMENT” means the agreement between the parties for mutually
agreed terms and conditions with commitment of Quantity Ordered.
Page 3 of 24
2. REFERENCE FOR DOCUMENTATION :
2.1. The number and date of Collective Request for Quotation (CRFQ) must appear on all
correspondence before finalization of Rate Contract / Purchase Order.
2.2. After finalization of Contract / Purchase Order: The number and date of Rate Contract /
Purchase Order must appear on all correspondence, drawings, invoices, dispatch advices,
(including shipping documents if applicable) packing list and on any documents or papers
connected with this order.
2.3. In the case of imports, the relevant particulars of the import Licence shall be duly indicated
in the invoice and shipping documents as well as on the packages or consignments.
3. RIGHT OF OWNER TO ACCEPT OR REJECT TENDER :
The right to accept the tender will rest with the Owner.
4. LANGUAGE:
The Bid and all supporting documentation and all correspondence whatsoever exchanged
by Vendor and Owner, shall be in English language only.
5. Price :
Unless otherwise agreed to the terms of the RFQ, price shall be :
Firm and no escalation will be entertained on any ground, except on the ground of
statutory levies applicable on the tendered items.
6. TAXES AND DUTIES :
All vendors shall have VAT / CST/GST/Service tax registration in the concerned State
and vendor shall quote their TIN number in the quotation.
6.1. EXCISE DUTY :
6.1.1. Excise duty extra as applicable at the time of delivery within scheduled delivery period
will be payable by BPCL against documentary evidence. Vendor shall mention in their
offer, the percentage of excise duty applicable at present. Any upward variation in excise
duty rates, beyond the contractual delivery period, shall be to vendor’s account.
6.1.2. In case Excise Duty is not applicable at present : Excise duty due to change in turn over is
not payable. If applicable in future, the same will be borne by vendor.
6.1.3. Owner shall take CENVAT Credit on the material supplied for both excise duty and cess
component and accordingly Excise duty / Cess should be quoted separately wherever
applicable.
Vendor shall ask the transporter of the goods to hand over the copy of excise invoice
(transporter’s copy) at the time of delivery of goods at owner’s site.
Page 4 of 24
6.2. SALES TAX / VAT/GST :
6.2.1. Sales Tax as applicable at the time of delivery within scheduled delivery period will be
payable by BPCL. Vendor shall give details of local sales tax and/oror central sales tax
currently applicable in their offer. The rates applicable for “CST without form C”, “CST
with form C" and “VAT” shall be clearly indicated.
6.2.2. Input VAT Credit may be claimed by BPCL, wherever applicable. Vendor shall submit
the TAX invoice.
6.3 Service tax :
All vendors shall have service tax registration wherever applicable. BPCL may also
claim CENVAT Credit on service tax. The vendor should quote service tax separately, if
applicable. Vendor shall submit the TAX invoice. Vendor is required to furnish serially
numbered and signed invoice / bill / challan containing the following details:
a) Name, address and registration number of the service provider
b) Name and address of person receiving taxable service
c) Description, classification and value of taxable service provided
d) Service Tax Payable
6.4 FREIGHT AND OCTROI :
6.4.1 Freight: Firm freight charges to be quoted as indicated in the Tender documents. Freight
shall be payable after receipt of the Material(s) at the site, unless otherwise specified.
6.4.2. Octroi and entry taxes, if any, shall be invoiced separately and shall be re-imbursed by
BPCL at actuals after receipt of the Material(s) at the Site against the submission of
original documentary evidence for proof of payment of the related octroi and entry taxes,
as the case may be.
6.5. NEW STATUTORY LEVIES :
All new statutory levies leviable on sale of finished goods to owner , if applicable are
payable extra by BPCL against documentary proof, within the contractual delivery
period.
6.6 Variation in Taxes/Duties
Any increase/decrease in all the above mentioned statutory levies on the date of delivery
during the scheduled delivery period on finished materials will be on BPCL's account.
Any upward variation in statutory levies after contractual delivery date shall be to
vendor’s account.
Page 5 of 24
7. INSPECTION :
7.1. Materials shall be inspected by BPCL approved third party inspection agency if
applicable before dispatch of materials. However, arranging and providing inspection
facilities is entirely vendor’s responsibility and in no way shall affect the delivery
schedule.
7.2. Scope of Inspection shall be as per RFQ. Our registered third party inspection agencies
are SGS/GLISPL/IRS/DNV/LRIS/EIL/TATA Projects/PDIL/ULIPL/RITES
LTD/ITSIPL as amended time to time unless otherwise specified in the Special Purchase
Conditions.
7.3. Unless otherwise specified, the inspection shall be carried out as per the relevant
standards/scope of inspection provided alongwith the Tender Enquiry/Purchase Order.
7.4. BPCL may, at its own expense, have its representative(s) witness any test or inspection.
In order to enable BPCL’s representative(s) to witness the tests/inspections. BPCL will
advise the Vendor in advance whether it intends to have its representative(s) be present at
any of the inspections.
7.5. Even if the inspection and tests are fully carried out, the Vendor shall not be absolved
from its responsibilities to ensure that the Material(s), raw materials, components and
other inputs are supplied strictly to conform and comply with all the requirements of the
Contract at all stages, whether during manufacture and fabrication, or at the time of
Delivery as on arrival at site and after its erection or start up or consumption, and during
the defect liability period. The inspections and tests are merely intended to prima-facie
satisfy BPCL that the Material(s) and the parts and components comply with the
requirements of the Contract. The Vendor’s responsibility shall also not be anywise
reduced or discharged because BPCL or BPCL’s representative(s) or Inspector(s) shall
have examined, commented on the Vendor’s drawings or specifications or shall have
witnessed the tests or required any chemical or physical or other tests or shall have
stamped or approved or certified any Material(s).
7.6. Although material approved by the Inspector(s), if on testing and inspection after receipt
of the Material(s) at the location, any Material(s) are found not to be in strict conformity
with the contractual requirements or specifications, BPCL shall have the right to reject
the same and hold the Vendor liable for non-performance of the Contract.
8. SHIPPING :
8.1 SEA SHIPMENT :
All shipment of materials shall be made by first class direct vessels, through the
chartering wing, Ministry of Surface Transport as per procedure detailed hereunder. The
Foreign Supplier shall arrange with Vessels Owners or Forwarding Agents for proper
storage of the entire Cargo intended for the project in a specific manner so as to faciliate
and to avoid any over carriage at the port of discharge. All shipment shall be under deck
unless carriage on deck is unavoidable.
The bills of lading should be made out in favour of `Bharat Petroleum Corporation Ltd..
or order'.
Page 6 of 24
All columns in the body of the Bill of Lading namely marks and nos., material
description, weight particulars etc., should be uniform and accurate and such statements
should be uniform in all the shipping documents. The freight particulars should mention
the basis of freight tonnage, heavy lift charges, if any, surcharge, discount etc. clearly and
separately. The net total freight payable shall be shown at the bottom.
SHIPPING DOCUMENTS :
All documents viz. Bill of Lading, invoices, packing list, freight memos, country of
origin certificates, test certificate, drawings and catalogues should be in English
language.
In addition of the bill of lading which should be obtained in three stamped original plus
as many copies as required, invoices, packing list, freight memos,(if the freight
particulars are not shown in the bills of lading), country of origin certificate, test /
composition certificate, shall be made out against each shipment in as many number of
copies as shown below.
The bill of lading, invoice and packing list specifically shall show uniformly the mark
and numbers, contents case wise, country of origin, consignees name, port of destination
and all other particulars as indicated under clause 2. The invoice shall show the unit
rates and net total F.O.B. prices. Items packed separately should also be invoiced and the
value shown accordingly. Packing list must show apart from other particulars actual
contents in each case, net and gross weights and dimensions, and the total number of
packages. All documents should be duly signed by the Vendor's authorised
representatives.
In the case of FOB orders, Shipping arrangements shall be made by the Chartering Wing
Of the Ministry of Surface Transport, New Delhi through their respective forwarding
agents. The names and addresses of forwarding agents shall be as per Special Purchase
Conditions. Supplier shall furnish to the respective agents the full details of consignments
such as outside dimension, weights (both gross and net) No of packages, technical
description and drawings, name of supplier, ports of loading, etc. 6 weeks notice shall be
given by the supplier to enable the concerned agency to arrange shipping space.
The bill of lading shall indicate the following :
Shipper : Goverment of India
Consignee : Bharat Petroleum Corporation Ltd.
In case of supplies from USA, Export Licences, if any required from the American
Authorities shall be Obtained by the U.S. Suppliers. If need be assistance for obtaining
such export licences would be available from India Supply Mission at Washington.
8.2 AIRSHIPMENT :
In case of Airshipment, the materials shall be shipped through freight consolidator
(approved by us). The airway bill shall be made out in favour of BHARAT
PETROLEUM CORPORATION LTD.
Page 7 of 24
TRANSMISSION OF SHIPPING DOCUMENTS :
Foreign Supplier shall obtain the shipping documents in seven complete sets including
three original stamped copies of the Bill of Lading as quickly as possible after the
shipment is made, and airmail as shown below so that they are received at least three
weeks before the Vessels arrival. Foreign Supplier shall be fully responsible or any delay
and / or demurrage in clearance of the consignment at the port due to delay in
transmittal of the shipping documents.
If in terms of letter or otherwise, the complete original set of documents are required to
be sent to BPCL through Bank the distribution indicated below will confine to copies of
documents only minus originals.
Documents BPCL (Mumbai)
Bill of Lading 4 (including 1 original)
Invoice 4
Packing List 4
Freight Memo 4
Country of Origin Certificate 4
Third party inspection certificate 4
Drawing 4
Catalogue 4
Invoice of Third Party 4
for inspection charges whenever applicable.
9. INDIAN AGENT COMMISSION :
Any offer through Indian agents will be considered only after authorization mentioning
them as Indian agents, is received from Vendor. Indian agents commission if applicable
will be payable only in Indian currency. Indian agents should be registered with
Directorate General of Supplies and Disposals, Government of India and agency
commission will be payable only after registration with DGS&D, New Delhi.
10. ORDER AWARD / EVALUATION CRITERIA :
Unless otherwise specified, Order award criteria will be on lowest quote landed price
basis. Landed price will be summation of Basic Price, Packing & Forwarding Charges,
Excise Duty, Sales Tax, Freight, Inspection, Octroi, Supervision of Installation &
Commissioning and other taxes & levies, loading etc, if any, reduced by cenvat/vat credit
as applicable.
11. CONFIRMATION OF ORDER :
The vendor shall acknowledge the receipt of the purchase order within 10 days of mailing
the same. The vendor shall sign, stamp the acknowledgement copy of the purchase order
and return the same to BPCL.
Page 8 of 24
12. PAYMENT TERMS :
12.1. Unless otherwise specified, 100% payment shall be made within 30 days from date of
receipt and acceptance of materials at Site against submission of Peformance Bank
Guarantee (PBG) for 10% of basic order value if PBG is applicable for the tender.
12.2. In the case of imports, payment will be made on submission of original documents
directly to Owner (Telegraphic Transfer-TT) or through Bank (Cash against documents-
CAD) or through irrevocable Letter of Credit.
12.3. Unless otherwise mentioned, the specified documents (All documents listed below (one
original and two copies)) should be submitted to originator of P.O. (the name and contact
details of whom are given in PO) and payments for despatches will be made by the
originator of Purchase Order :
a) Invoice
b) Excise invoice
c) The Lorry Receipt of the consignment
d) Packing list for the consignment
e) Third Party Inspector’s Certificate covering the invoiced Material(s)/ Release
Note, wherever applicable
f) Manufacturers Test/Composition Certificate, wherever applicable
g) Drawing(s)/Catalogue(s) covering the Material(s) , wherever applicable
h) Guarantee/Warranty Certificate(s), wherever applicable.
i) Original Receipt for Octroi/other statutory levies as applicable.
j) Performance Bank Guarantee as applicable.
13. GUARANTEE/WARRANTY :
13.1. Materials shall be guaranteed against manufacturing defects, materials, workmanship and
design for a period of 12 months from the date of commissioning or 18 months from the
date of dispatch whichever is earlier. Warranty for replacement of material / accessories
should be provided free of charges at our premises. The above guarantee/warranty will
be without prejudice to the certificate of inspection or material receipt note issued by us
in respect of the materials.
13.2. All the materials including components and sub contracted items should be guaranteed by
the vendor within the warranty period mentioned above. In the event of any defect in the
material, the vendor will replace / repair the material at BPCL’s concerned location at
vendor’s risk and cost on due notice.
13.3. In case, vendor does not replace / repair the material on due notice, rejected material will
be sent to the vendor on “Freight to pay” basis for free replacement. Material after
rectification of defects shall be dispatched by the vendor on “Freight Paid” basis.
Alternatively, BPCL reserves the right to have the material repaired / replaced at the
locations concerned, at the vendor’s risk, cost and responsibility.
13.4. The Vendor shall provide similar warrantee on the parts, components, fittings,
accessories etc. so repaired and / or replaced.
Page 9 of 24
14. PERFORMANCE BANK GUARANTEE :
14.1. Vendor will have to provide Performance Bank Guarantee for 10% of the basic value of
purchase order unless otherwise specified. This bank guarantee shall be valid (shall
remain in force) for guarantee period (as mentioned in the guarantee clause), with an
invocation period of six months thereafter. In the case of Indigenous vendors, the
Performance Bank Guarantee shall be given on a non-judicial stamp paper of appropriate
value (currently Rs 100). PBG format is as per Annexure I.
In case, PBG is not provided by the Vendor, 10% of the basic value shall be retained in
lieu of PBG, till the expiry of guarantee and claim period.
In the case of imports, the Supplier shall furnish the Performance Bank Guarantee (as per
Annexure I) through the following :
a) Branches of Indian scheduled banks operating in their Country.
b) Foreign bank operating in their Country which is counter guaranteed by branches of
Indian scheduled banks operating in their Country/India.
c) Indian branches of foreign banks.
d) Foreign bank operating in their Country counter guaranteed by their Indian branch
However, in respect of c) and d) above, the Indian branch of foreign banks should be
recognized as scheduled bank by Reserve Bank of India.
14.2. If Vendor wants to submit the PBG at Contract level to avoid multiple number of PBG
(i.e. PBG issued against every purchase/call off order) then the validity of PBG will be
calculated as mentioned below :
14.2.1. Validity of PBG = Rate Contract Issue Date (Start Date of Rate Contract) + Rate
Contract Period (validity of Rate Contract) + Contractual Delivery Period of material +
Contractual Guarantee period + 6 month (for invocation / Claim).
15. PACKING & MARKING :
15.1 PACKING :
15.1.1 Packing shall withstand the hazards normally encountered with the means of transport
for the goods of this purchase order including loading and unloading operation both by
crane and by pushing off.
In the case of imports, all equipments / materials shall be suitably packed in weather
proof, seaworthy packing for ocean transport under tropical conditions and for rail or
road or other appropriate transport in India. The packing shall be strong and efficient
enough to ensure safe preservance upto the final point of destination.
Raw/Solid wood packaging material of imported items has to be appropriately treated &
marked as per International Standard of Phytosanitary Measures (ISPM-15") for material
originating from the contracting countries to the International Plant Protection
Convention or the members of Food & Agriculture Organization. Material from non-
contracting parties would have to be accompanied by a phytosanitary certificate of the
Page 10 of 24
treatment endorsed. The Custom Officer at Indian Port shall not release the material
without appropriate compliance of the above provisions w.e.f. 01.11.2004.
15.1.2 The packing specification incorporated herein are supplementary to the internal and
external packing methods and standards as per current general rules of J.R.A. Good Tariff
Part-I. All packaging shall be done in such a manner as to reduce volume as much as
possible.
15.1.3 Fragile articles should be packed with special packing materials depending on the type of
Materials and the packing shall bear the words "HANDLE WITH CARE GLASS
FRAGILE, DON'T ROLL THIS END UP. THIS END DOWN," to be indicated by
arrow.
15.1.4 Chemicals in powder form, catalyst, refractories and like materials etc. shall be packed in
drums, cans and tins only. However, Catalyst may be supplied in Jumbo bags.
15.1.5 The hazardous materials shall be packed in accordance with the applicable rules,
regulations and tariff of all cognizant Government Authorities and other Governing
bodies. It shall be the responsibility of the seller of hazardous materials to designate the
material as hazardous and to identify each material by its proper commodity name and its
hazardous material class code.
15.1.6 All package requiring handling by crane should have sufficient space at appropriate place
to put sling of suitable dia (strength). Iron/Steel angle should be provided at the place
where sling marking are made to avoid damage to package/ equipment while lifting.
15.1.7 Item shipped in bundles must be securely tied with steel wire or strapping. Steel
reinforcing rods, bars, pipes, structural members etc. shall be bundled in uniform lengths
and the weight shall be within the breaking strength of the securing wire or strapping.
In the case of imports, for bundles the shipping marks shall be embossed on metal or
similar tag and wired securely on each end.
15.1.8 All delicate surface on equipment/materials should be carefully protected and printed
with protective paint/compound and wrapped to prevent rusting and damage.
15.1.9 All mechanical and electrical equipment and other heavy articles shall be securely
fastened to the case bottom and shall be blocked and braced to avoid any
displacement/shifting during transit.
15.1.10 Attachments and spare parts of equipment and all small pieces shall be packed separately
in wooden cases with adequate protection inside the case and wherever possible should
be sent along with the main equipment. Each item shall be suitably tagged with
identification of main equipment, item denomination and reference number of respective
assembly drawing. Each item of steel structure and furnaces shall be identified with two
erection markings with minimum lettering height of 15mm. Such markings will be
followed by the collection numbers in indelible ink/paint. A copy of the packing list shall
accompany the materials in each package.
15.1.11 All protrusions shall be suitably protected by providing a cover comprising of tightly
bolted wooden disc on the flanges. All nozzles, holes and openings and also all delicate
Page 11 of 24
surfaces shall be carefully protected against damage and bad weather. All manufactured
surfaces shall be painted with rust proof paint.
In the case of imports, for bulk uniform material when packed in several cases,
progressive serial numbers shall be indicated on each case.
15.1.12 Wherever required, equipment/materials instruments shall be enveloped in polythene
bags containing silicagel or similar dehydrating compound.
15.1.13 Pipes shall be packed as under:
a. Upto 50mm NB in wooden cases/crates.
b. Above 50mm NB and upto 100mm NB in bundles and should be strapped at minimum
three places.
c. Above 100mm NB in loose.
15.1.14 Pipes and tubes of stainless steel, copper etc. shall be packed in wooden cases
irrespective of their sizes.
15.1.15 Pipes with threaded or flanged ends shall be protected with suitable caps covers, before
packing.
In the case of imports, all pipes and sheets shall be marked with strips bearing
progressive no.
15.1.16 Detailed packing list in waterproof envelope shall be inserted in the package together
with equipment/materials. One copy of the detailed packing list shall be fastened outside
of the package in waterproof envelope and covered by metal cover.
15.1.17 The supplier shall be held liable for all damages or breakages to the goods due to the
defective or insufficient packing as well as for corrosion due to insufficient protection.
15.1.18 Packaged equipment or materials showing damage defects or shortages resulting from
improper packaging materials or packing procedures or having concealed damages or
shortages, at the time of unpacking shall be to the supplier’s account.
All packages which require special handling and transport should have their Centres of
Gravity and the points at which they may be slung or gripped clearly indicated and
marked “ATTENTION SPECIAL LOAD HANDLE WITH CARE” both in
English/Hindi Languages.
In the case of imports, a distinct colour splash in say red black around each package crate
/ bundle shall be given for identification. 15.1.19 Along with the packed material, supplier should attach material list, manuals/instructions
and also the Inspection certificate/release note, wherever applicable.
Page 12 of 24
15.2. MARKING :
The following details to be written on the side face of packing:
a) Purchase Order Number
b) Vendor Name
c) Batch no with Manufacturing date
d) Procedure (in brief) for handling
e) Date of dispatch etc.
15.3 Imported items :
On three sides of the packages, the following marks shall appear, clearly visible, with
indelible paint and on Vendor's care and expenses.
BHARAT PETROLEUM CORPORATION LIMITED
(With detailed address as given in Special Purchase Conditions)
From :
To : Bharat Petroleum Corpn.Ltd.
(With detailed address as given in Special Purchase Conditions)
Order no. Rev. no.
Item :
Equipment Nomenclature :
Net weight : Kgs.
Gross weight : Kgs.
Case No. of Total cases :
Dimensions :
Import Licence No.
NOTE :
Marking shall be bold - minimum letter height 5 cm. For every order and every
shipment, packages must be marked with serial progressive numbering.
Top heavy containers shall be so marked either Top Heavy or Heavy Ends.
When packing material is clean and light coloured, a dark black stencil paint shall be
acceptable. However, where packaging material is soiled or dark, a coat of flat zinc
white paint shall be applied and allowed to dry before applying the specific markings.
Page 13 of 24
In case of large equipments like vessels, heat exchangers, etc. the envelope containing the
documents shall be fastened inside a shell connection, with an identifying arrow sign
"documents" using indelible paint.
16. DELIVERY :
16.1. Unless otherwise mentioned, Vendor is requested to quote their best delivery schedule
from the date of receipt of Purchase order.
16.2. Time being the essence of this contract, the delivery mentioned in the purchase order
shall be strictly adhered to and no variation shall be permitted except with prior
authorization in writing from the Owner. Goods should be delivered, securely packed and
in good order and condition, at the place of delivery and within the time specified in the
purchase order for their delivery.
16.3. The contractual delivery period is inclusive of all the lead time for engineering /
procurement of raw material, the manufacturing, inspection / testing, packing,
transportation or any other activity whatsoever required to be accomplished for effecting
the delivery at the required delivery point.
16.4. Unless otherwise specified, Material(s) shall not be despatched without prior inspection
and/or testing and Release Order/Material(s) Acceptance Certificate issued by the
Inspector(s).
16.5. BPCL shall have the right to advise any change in despatch point or destination in respect
of any Material(s). Any extra expenditure incurred by the Vendor on this account
supported by satisfactory documentary evidence, will be reimbursed to the Vendor by
BPCL.
17. UNLOADING AND STACKING :
Unloading and stacking will be arranged by BPCL. The Vendor shall send BPCL
information of the proposed consignment well in advance by telegram/fax/e-mail/courier
to enable BPCL to take necessary action.
18. TRANSIT INSURANCE :
Unless otherwise mentioned,
18.1. Transit Insurance shall be covered by BPCL against its Mega Package Policy.
18.2 In the case of imports, insurance against all marine and transit risk shall be covered under
the Owner's marine policy. However, the Vendor shall ensure that in effecting
shipments clear bill of lading are obtained and the carrier's responsibility is fully retained
on the Carriers so that the consignee's interests are fully secured and are in no way
jeopardized.
Page 14 of 24
18.2. The Vendor shall send BPCL information of the proposed consignment well in advance
by telegram/fax/e-mail/courier to enable BPCL to take necessary action for the transit
insurance of the consignment. Any failure by the Vendor to do so shall place the
consignment at the Vendor’s risk.
18.3. In the case of imports, as soon as any shipment is made, the Foreign Supplier shall send
advance information by way of Telex message to Bharat Petroleum Corporation Ltd.,
(with detailed address as given in Special Purchase Conditions) giving particulars of the
shipments, vessels name, port of shipment, bill of lading number and date, total FOB and
freight value.
19 VALIDITY OF OFFER:
The rates quoted against this tender shall be valid for a period of 90 Days from the date
of opening of the tender unless otherwise specified in the Special Purchase Conditions.
20. DELIVERY DATES AND PRICE REDUCTION SCHEDULE :
20.1. The time and date of Delivery of Material(s) as stipulated in the Contract shall be adhered
to on the clear understanding that the Price(s) of the Material(s) has/have been fixed with
reference to the said Delivery date(s).
20.2. If any delay is anticipated by the Vendor in the delivery of the Material(s) or any of them
beyond the stipulated date(s) of Delivery, the Vendor shall forthwith inform BPCL in
writing of such anticipated delay and of the steps being taken by the Vendor to remove or
reduce the anticipated delay, and shall promptly keep BPCL informed of all subsequent
developments.
20.3. The delivery period quoted must be realistic & specific. The inability of successful
Vendors to execute orders in accordance with the agreed delivery schedule will entitle
BPCL, at its options, to :
20.3.1. Accept delayed delivery at prices reduced by a sum equivalent to half percent (0.5%) of
the basic value of any goods not delivered for every week of delay or part thereof, limited
to a maximum of 5% of the total basic order value. LR date will be considered as delivery
completion date for calculation of price reduction in the case of ex works contract. Date
of receipt of materials at owners premises shall be considered for calculation of price
reduction for F.O.R destination contract.
In the case of imports, the contractual delivery date shall be considered from the date of
Letter of Credit (L/C) or the date of L/C amendment because of Buyer’s fault plus one
week (to take care of transit time for receipt of L/c) plus the delivery schedule as
indicated by the vendors.
In case of the shipment taking place on “Cash against documents”, the contractual
delivery shall be taken from the date of purchase order plus one week (to take care of
transit time for receipt of order) plus delivery period.
Further the date of B/L or House airway bill shall be considered to find out the delay with
respect to contractual delivery date. In case of FOB shipments if the vessel is not
available then the intimation by vendors regarding readiness of the goods for the
shipment shall be considered for calculating the delay if any. So vendor shall inform the
Page 15 of 24
readiness of material for shipment on FOB (Free on Board)basis / FCA (Free on Carrier)
basis.
20.3.2. Cancel the order in part or full and purchase such cancelled quantities from elsewhere on
account at the risk and cost of the vendor, without prejudice to its right under 20.3.1
above in respect of goods delivered.
21. RISK PURCHASE CLAUSE :
BPCL reserves the right to curtail or cancel the order either in full or part thereof if the
vendor fails to comply with the delivery schedule and other terms & conditions of the
order. BPCL also reserves the right to procure the same or similar materials/equipment
through other sources at vendor's entire risk, cost and consequences. Further, the vendor
agrees that in case of procurement by the owner from other sources the differential
amount paid by the owner shall be on account of the vendor together with any interest
and other costs accrued thereon for such procurement.
22. FORCE MAJEURE CLAUSE :
(A) Definition: The term “Force Majeure” means any event or circumstance or
combination of events or circumstances that affects the performance by the
vendor of its obligations pursuant to the terms of this Agreement (including by
preventing, hindering or delaying such performance), but only if and to the extent
that such events and circumstances are not within the vendor’s reasonable control
and were not reasonably foreseeable and the effects of which the vendor could not
have prevented or overcome by acting as a Reasonable and Prudent person or, by
the exercise of reasonable skill and care. Force Majeure events and circumstances
shall in any event include the following events and circumstances to the extent
they or their consequences satisfy the requirements set forth above in this Clause:
(i) the effect of any element or other act of God, including any storm,
flood, drought, lightning, earthquake, tidal wave, tsunami, cyclone
or other natural disaster;
(ii) fire, accident, loss or breakage of facilities or equipment, structural
collapse or explosion;
(iii) epidemic, plague or quarantine;
(iv) air crash, shipwreck, or train wreck;
(v) acts of war (whether declared or undeclared), sabotage, terrorism
or act of public enemy (including the acts of any independent unit
or individual engaged in activities in furtherance of a programme
of irregular warfare), acts of belligerence of foreign enemies
(whether declared or undeclared), blockades, embargoes, civil
disturbance, revolution, rebellion or insurrection, exercise of
military or usurped power, or any attempt at usurpation of power;
Page 16 of 24
(vi) radioactive contamination or ionizing radiation;
( B) Notice and Reporting:
( i ) The Vendor shall as soon as reasonably practicable after the date
of commencement of the event of Force Majeure, but in any event
no later than two (7) days after such commencement date, notify
the BPCL in writing of such event of Force Majeure and provide
the following information:
(a) reasonably full particulars of the event or circumstance of
Force Majeure and the extent to which any obligation will
be prevented or delayed;
(b) such date of commencement and an estimate of the period
of time required to enable the vendor to resume full
performance of its obligations; and
(c) all relevant information relating to the Force Majeure and
full details of the measures the vendor is taking to
overcome or circumvent such Force Majeure.
(ii) The Vendor shall, throughout the period during which it is prevented
from performing, or delayed in the performance of, its
obligations under this Agreement, upon request, give or procure
access to examine the scene of the Force Majeure including such
information, facilities and sites as the other Party may
reasonably request in connection with such event. Access to any
facilities or sites shall be at the risk and cost of the Party
requesting such information and access.
(C) Mitigation Responsibility:
(i) The Vendor shall use all reasonable endeavours, acting as a
Reasonable and Prudent Person, to circumvent or overcome any
event or circumstance of Force Majeure as expeditiously as
possible, and relief under this Clause shall cease to be available to
the Vendor claiming Force Majeure if it fails to use such
reasonable endeavours during or following any such event of Force
Majeure.
(ii) The Vendor shall have the burden of proving that the
circumstances constitute valid grounds of Force Majeure under this
Clause and that it has exercised reasonable diligence efforts to
remedy the cause of any alleged Force Majeure.
(iii) The Vendor shall notify BPCL when the Force Majeure has
terminated or abated to an extent which permits resumption of
performance to occur and shall resume performance as
Page 17 of 24
expeditiously as possible after such termination or abatement.
(D) Consequences of Force Majeure. Provided that the Vendor has
complied and continues to comply with the obligations of this
Clause and subject to the further provisions:
(i) the obligations of the Parties under this Agreement to the extent
performance thereof is prevented or impeded by the event of Force
Majeure shall be suspended and the Parties shall not be liable for
the non-performance thereof for the duration of the period of Force
Majeure; and
(ii) the time period(s) for the performance of the obligations of the
Parties under this Agreement to the extent performance thereof is
prevented or impeded by the event of Force Majeure shall be
extended for the duration of the relevant period of Force Majeure
except as provided herein.
(E) Force Majeure Events Exceeding 60 Days
(i) If an event or series of events (alone or in combination) of Force
Majeure occur, and continue for a period in excess of 60
consecutive days, then BPCL shall have the right to terminate this
agreement, whereupon the Parties shall meet to mitigate the
impediments caused by the Force Majeure event.
23. ARBITRATION CLAUSE :
23.1 Any dispute or difference of any nature whatsoever, any claim, cross-claim,
counter-claim or set off of BPCL/Vendor against omission or on account of any
of the parties hereto arising out of or in relation to this Contract shall be referred
to the Sole Arbitration of Director(Marketing) / Director (HR) / Director (R) of
BPCL as the case may be or to some officer of BPCL who may be nominated by
them.
23.2. In the event the Arbitrator being unable or refusing to act for any reason whatsoever, the
said Directors of BPCL shall designate another person to act as an Arbitrator in
accordance with the terms of the said Contract/Agreement. The Arbitrator newly
appointed shall be entitled to proceed with the reference from the point at which it was
left by his predecessor.
23.3. It is known to the parties herein that the Arbitrator appointed hereunder is an employee of
the Corporation and may be Share holder of the Corporation.
23.4. The award of the Arbitrator so appointed shall be final, conclusive and binding on all the
parties to the contract and the law applicable to arbitration proceedings will be the
Arbitration and Conciliation Act, 1996 or any other enactment in replacement thereof.
Page 18 of 24
23.5. The language of the proceedings will be in English and the place of proceedings will be
Mumbai.
23.6. The parties hereby agree that the Courts in the city of Mumbai alone shall have
jurisdiction to entertain any application or other proceedings in respect of anything
arising under this Agreement and any Award or Awards made by the Sole Arbitrator
hereunder shall be filed, if required, in the concerned Courts in the City of Mumbai alone.
(legal)
24. INTEGRITY PACT (IP) :
Vendors are requested to sign & return our pre-signed IP document , if applicable. This
document is essential & binding. Vendor's failure to return the IP document duly signed
along with Bid Document may result in the bid not being considered for further
evaluation.
25. RECOVERY OF SUMS DUE :
Whenever, any claim against vendor for payment of a sum of money arises out of or
under the contract, the owner shall be entitled to recover such sums from any sum then
due or when at any time thereafter may become due from the vendor under this or any
other contract with the owner and should this sum be not sufficient to cover the
recoverable amount of claim(s), the vendor shall pay to BPCL on demand the balance
remaining due.
26. CONFIDENTIALITY OF TECHNICAL INFORMATION :
Drawing, specifications and details shall be the property of the BPCL and shall be
returned by the Vendor on demand. The Vendor shall not make use of drawing and
specifications for any purpose at any time save and except for the purpose of BPCL. The
Vendor shall not disclose the technical information furnished to or organized by the
Vendor under or by virtue of or as a result of the implementation of the Purchase Order to
any person, firm or body or corporate authority and shall make all endeavors to ensure
that the technical information is kept CONFIDENTIAL. The technical information
imparted and supplied to the vendor by BPCL shall at all time remain the absolute
property of BPCL. Imparting of any confidential information by the Vendor will be
breach of contract.
27. PATENTS & ROYALTIES :
The vendor shall fully indemnify BPCL and users of materials specified herein/supplied
at all times, against any action, claim or demand, costs and expenses, arising from or
incurred by reasons of any infringement or alleged infringement of any patent, registered
design, trademark or name, copy right or any other protected rights in respect of any
materials supplied or any arrangement, system or method of using, fixing or working
used by the vendor. In the event of any claim or demand being made or action sought
against BPCL in respect of any of the aforesaid matter, the vendor shall be notified
thereof immediately and the vendor shall at his/its own expense with (if necessary) the
Page 19 of 24
assistance of BPCL (whose all expense shall be reimbursed by the vendor) conduct all
negotiations for the settlement of the same and/or litigation which may arise thereof.
28. LIABILITY CLAUSE :
In case where it is necessary for employees or representatives of the Vendor to go upon
the premises of owner, vendor agrees to assume the responsibility for the proper conduct
of such employees/representatives while on said premises and to comply with all
applicable Workmen's Compensation Law and other applicable Government Regulations
and Ordinances and all plant rules and regulations particularly in regard to safety
precautions and fire hazards. If this order requires vendor to furnish labour at site, such
vendor's workmen or employees shall under no circumstances be deemed to be in owner's
employment and vendor shall hold himself responsible for any claim or claims which
they or their heirs, dependent or personal representatives, may have or make, for damages
or compensation for anything done or committed to be done, in the course of carrying
out the work covered by the purchase order, whether arising at owner's premises or
elsewhere and agrees to indemnify the owner against any such claims, if made against the
owner and all costs of proceedings, suit or actions which owner may incur or sustain in
respect of the same.
29. COMPLIANCE OF REGULATIONS :
Vendor warrants that all goods/Materials covered by this order have been produced, sold,
dispatched, delivered and furnished in strict compliance with all applicable laws,
regulations, labour agreement, working condition and technical codes and statutory
requirements as applicable from time to time. The vendor shall ensure compliance with
the above and shall indemnify owner against any actions, damages, costs and expenses of
any failure to comply as aforesaid.
30. REJECTION, REMOVAL OF REJECTED GOODS AND REPLACEMENT:
In case the testing and inspection at any stage by inspectors reveal that the equipment,
materials and workmanship do not comply with specification and requirements, the same
shall be removed by the vendor at his/its own expense and risk, within the time allowed
by the owner. The owner shall be at liberty to dispose off such rejected goods in such
manner as he may think appropriate. In the event the vendor fails to remove the rejected
goods within the period as aforesaid, all expenses incurred by the owner for such disposal
shall be to the account of the vendor. The freight paid by the owner, if any, on the inward
journey of the rejected materials shall be reimbursed by the vendor to the owner before
the rejected materials are removed by the vendor. The vendor will have to proceed with
the replacement of the equipment or part of equipment without claiming any extra
payment if so required by the owner. The time taken for replacement in such event will
not be added to the contractual delivery period.
31. NON-WAIVER :
Failure of the Owner to insist upon any of the terms or conditions incorporated in the
Purchase Order or failure or delay to exercise any rights or remedies herein, or by law or
failure to properly notify Vendor in the event of breach, or the acceptance of or payment
of any goods hereunder or approval of design shall not release the Vendor and shall not
be deemed a waiver of any right of the Owner to insist upon the strict performance
Page 20 of 24
thereof or of any of its or their rights or remedies as to any such goods regardless of when
such goods are shipped, received or accepted nor shall any purported oral modification or
revision of the order by BPCL act as waiver of the terms hereof. Any waiver to be
effective must be in writing. Any lone incident of waiver of any condition of this
agreement by BPCL shall not be considered as a continuous waiver or waiver for other
condition by BPCL.
32. NEW & UNUSED MATERIAL :
All the material supplied by the vendor shall be branded new, unused and of recent
manufacture.
33. PURCHASE PREFERENCE CLAUSE :
Owner reserves its right to allow Public Sector Enterprises (Central/State), purchase
preference as admissible/applicable from time to time under the existing Govt. policy.
Purchase preference to a PSE shall be decided based on the price quoted by PSE as
compared to L1 Vendor at the time of evaluation of the price bid.
Owner reserves its right to allow Micro and Small Enterprises (MSEs) and MSEs
owned by Scheduled Caste (SC) or the Scheduled tribe (ST) entrepreneurs,
purchase preference as admissible/applicable from time to time under the existing Govt.
policy. Purchase preference to a MSE and a MSE owned by SC/ST entrepreneurs
shall be decided based on the price quoted by the said MSEs as compared to L1 Vendor
at the time of evaluation of the price bid.
34. CANCELLATION :
34.1. BPCL reserves the right to cancel the contract/purchase order or any part thereof through
a written notice to the vendor if.
34.1.1. The vendor fails to comply with the terms of this purchase order/contract.
34.1.2. The vendor becomes bankrupt or goes into liquidation.
34.1.3. The vendor fails to deliver the goods on time and/or replace the rejected goods promptly.
34.1.4. The vendor makes a general assignment for the benefit of creditors.
34.1.5. A receiver is appointed for any of the property owned by the vendor.
34.2. Upon receipt of the said cancellation notice, the vendor shall discontinue all work on the
purchase order matters connected with it. BPCL in that event will be entitled to procure
the requirement in the open market and recover excess payment over the vendor's agreed
price if any, from the vendor and also reserving to itself the right to forfeit the security
deposit if any, made by the vendor against the contract. The vendor is aware that the said
goods are required by BPCL for the ultimate purpose of materials production and that
non-delivery may cause lossof production and consequently loss of profit to the BPCL. In
Page 21 of 24
this-event of BPCL exercising the option to claim damages for non delivery other than
by way of difference between the market price and the contract price, the vendor shall
pay to BPCL, fair compensation to be agreed upon between BPCL and the vendor. The
provision of this clause shall not prejudice the right of BPCL from invoking the
provisions of price reduction clause mentioned in 20.3.1 as aforesaid.
35. ANTI –COMPETITIVE AGREEMENTS/ABUSE OF DOMINANT POSITION :
The Competition Act, 2002 as amended by the Competition (Amendment) Act, 2007 (the
Act), prohibits anti- competitive practices and aims at fostering competition and at
protecting Indian markets against anti- competitive practices by enterprises. The Act
prohibits anti- competitive agreements, abuse of dominant position by enterprises, and
regulates combinations (consisting of acquisition, acquiring of control and M&A)
wherever such agreements, abuse or combination causes, or is likely to cause, appreciable
adverse effect on competition in markets in India. BPCL reserves the right to approach
the Competition Commission established under the Act of Parliament and file
information relating to anti-competitive agreements and abuse of dominant position. If
such a situation arises, then Vendors are bound by the decision of the Competitive
Commission and also subject to penalty and other provisions of the Competition Act.
36. ASSIGNMENT
The Vendor can / does not have any right to assign his rights and obligations under these
general purchase conditions without the prior written approval of BPCL.
37. GOVERNING LAW
These General Purchase Conditions shall be governed by the Laws of India.
38. AMENDMENT
Any amendment to these General Purchase Conditions can be made only in writing and
with the mutual consent of the parties to these conditions.
39. SPECIAL PURCHASE CONDITIONS
In case of a conflict between the clauses, terms and conditions of General Purchase
Conditions and Special Purchase condition, the clauses, terms and conditions of Special
Purchase Condition will have an overriding effect over General Purchase Conditions and
the same shall be applicable.
Page 22 of 24
40. NOTICES
Any notices to be given hereunder by a Party to the other shall be in English and
delivered by hand or sent by courier or facsimile to the other Party at the address
or facsimile number stated below or such other address or number as may be
notified by the relevant Party from time to time:
BPCL
_______________________ _______________________
_______________________
Vendor
_______________________
_______________________
_______________________
Please sign & return all the pages of GPC as a token of your acceptance of all the terms &
conditions as mentioned above.
Page 23 of 24
Annexure I
PERFORMANCE BANK GUARANTEE
(On Non-judicial paper for appropriate value)
To,
Bharat Petroleum Corporation Limited
---------------------------------
--------------------------------
Dear Sir,
In consideration of the Bharat Petroleum Corporation Limited, (hereinafter called ‘the Company’
which expression shall include its successors and assigns) having awarded to M/s. (Name)
………. (Constitution)………….. (address) ……….(hereinafter referred to as “The vendor”
which expression shall wherever the subject or context so permits include its successors and
assigns) a supply contract in terms interalia, of the Company’s Purchase order No…….. dated
………. and the General and Special Purchase Conditions of the Company and upon the
condition of vendor’s furnishing security for the performance of the vendor’s obligations and/or
discharge of the vendor’s liability under and / or in connection with the said supply contract upto
a sum of Rs.(in figures)…………..Rs(in words)…………………………only amounting to 10%
(ten percent)of the total contract value.
We, (Name)…………..(constitution) ……………(hereinafter called “the Bank” which
expression shall include its successors and assigns) hereby jointly and severally undertake and
guarantee to pay to the Company in -----(Currency) forthwith on demand in writing and without
protest or demur of any and all moneys any wise payable by the Vendor to the Company under in
respect of or in connection with the said supply contract inclusive of all the Company’s losses and
expenses and other moneys anywise payable in respect to the above as specified in any notice of
demand made by the Company to the Bank with reference to this Guarantee upto an aggregate
limit of Rs(in figures)…………Rs(in words)……………………….only.
AND the Bank hereby agrees with the Company that
i. This Guarantee/undertaking shall be a continuing guarantee and shall remain valid
and irrevocable for all claims of the Company and liabilities of the vendor arising
upto and until midnight of …………………………………..
Page 24 of 24
This date shall be 6 months from the last date of guarantee period.
ii This Guarantee / Undertaking shall be in addition to any other guarantee or security of
whatsoever that the Company may now or at any time otherwise have in relation to the vendor’s
obligation/liabilities under and /or connection with the said supply contract, and the Company
shall have full authority to take recourse to or reinforce this security in preference to the other
security(ies) at its sole discretion, and no failure on the part of the Company in enforcing or
requiring enforcement of any other security shall have the effect of releasing the Bank from its
liability hereunder.
ii. The Company shall be at liability without reference to the Bank and without effecting
the full liability of the Bank hereunder to take any other security in respect of the
vendor’s obligations and /or liabilities under or in connection with the said supply
contract and to vary the terms vis a vis the vendor of the said supply contract or to
grant time and / or indulgence to the vendor or to reduce or to increase or otherwise
vary the prices of the total contract value or to release or to forbear from enforcement
all or any of the obligations of the vendor under the said supply contract and / or the
remedies of the Company under any other security(ies) now or hereafter held by the
Company and no such dealing(s), variation(s), reduction(s), increase(s) or the
indulgence(s) or arrangement(s) with the vendor or release or forbearance whatsoever
shall have the effect of releasing the Bank from its full liability to the Company
hereunder or of prejudicing rights of the Company against the Bank.
iv. This Guarantee /Undertaking shall not be determined by the liquidation or winding up
ordissolution or change of constitution or insolvency of the vendor but shall in all respects and for
all purposes be binding and operative until payment of all moneys payable to the Company in
terms hereof.
v. The Bank hereby waives all rights at any time inconsistent with the terms of the Guarantee /
Undertaking and the obligations of the Bank in terms hereof shall not be anywise affected or
suspended by reason of any dispute or disputes having been raised by the vendor (whether or not
pending before any Arbitrator, officer, Tribunal or Court) or any denial of liability by the vendor
or any other order of communication whatsoever by the vendor stopping or preventing or
purporting to stop or prevent any payment by the Bank to the Company in terms hereof.
vi. The amount stated in any notice of demand addressed by the Company to the Guarantor as
liable to be paid to the Company by the vendor or as suffered or incurred by the Company on
account of any losses or damages of costs, charges and or expenses shall as between the Bank and
the Company be conclusive of the amount so liable to be paid to the Company or suffered or
incurred by the Company, as the case may be and payable by the Guarantor to Company in terms
hereof.
Yours faithfully,
(Signature)
NAME & DESIGNATION
NAME OF THE BANK
NOTES:
NUMALIGARH REFINERY LIMITED
General Purchase Conditions (Indigenous)
Definition:
'NRL' means 'Numaligarh Refinery Limited'
'Vendor' means a Person or Firm or Company, to whom the order is
addressed, for supply of goods and/or services.
Banker: Unless otherwise specified, NRL's banker at Numaligarh
shall be: State Bank of India, NRL Complex, P.O. NR Project,
Pin: 785699, Dist. Golaghat, Assam. Bank Code: 5377.
1. Price Basis
Prices are to be quoted on FOT NRL Site, Numaligarh basis (or,
FOT NRL Guwahati/New Delhi/Calcutta basis, as the case may be)
showing break-up of taxes, duties, packing & forwarding, freight
and transit insurance charges, (all in % age).
2. Firm Price
Quoted prices shall remain firm and fixed till complete
execution of the order.
3. Payment Term
Unless otherwise specified/agreed, the payment term shall be
"100% within 30 days of receipt and acceptance of goods."
4. Weights & Measurements
All weights and measurements recorded by NRL on receipt of
materials shall be treated as final and binding.
5. Qty. Tolerance
For Steel Items, 0.5% qty. tolerance for Weigh Bridge scale
variation or, std. rolling tolerance (as applicable) for
sectional weight measurements shall be permissible.
6. Transportation
Unless otherwise agreed upon, transportation of goods upto the
specified destination shall be in vendor's scope.
Contd…2
Page…2
7. Despatch
Unless otherwise specified, all LR/RR etc. must be in the name
of Numaligarh Refinery Limited and not 'Self'. Any demurrage or
wharfage paid by NRL to the carriers due to consignments being
booked as 'Self' will be recovered from the vendor. No
consignment shall be booked on 'Said to Contain' basis. If so,
it will be at vendor's own responsibility and risk.
8. Packing, Marking, Shipping & Documentation
All consignments must be securely and appropriately packed and
should conform to Standard Material Transport Regulations. The
vendor will be held liable for any damages to the goods due to
insufficient or defective packing as well as for corrosion due
to insufficient protection.
Each package shall be clearly marked with indelible paint with
the Purchase Order No., From (Name & Add.), To (Name & Add.),
Destination, Item Net & Gross Weight, Case No. (Sl. No. of Total
Cases) & Dimensions, and shall contain copies of despatch
documents and packing list.
Details given in the "Packing, Marking, Shipping and
Documentation Specification for Indigenous Materials" - wherever
enclosed with a Purchase Order, shall be strictly followed.
9. Test Certificate
Test certificate of representative samples conforming to PO
specifications from the manufacturer/Govt. approved
laboratory/NRL nominated agency must be furnished alongwith
supplies.
In case of 3rd Party Inspection, the Inspection Reports must
accompany all despatch documents as well as supplies.
10. Guarantee
Vendor shall guarantee NRL against any and all defects in
design, workmanship of material and performance for a period of
12 months from the date of commissioning/installation or 24
months from the date of last despatch, whichever expires first.
Should any defects develop during the guarantee period, it
should be remedied promptly free of cost by the vendor and all
expenses for transportation of goods necessitated for such
repairs or replacement shall be borne by the vendor. The
guarantee period for such repaired/replaced goods shall again be
12 months from the date of commissioning/installation.
Contd…3
Page…3
11. Insurance Charges
Transit insurance shall be in NRL's scope only when specifically
agreed upon. In such cases, vendor shall intimate despatch
details and value of goods in advance per fax for transit
insurance coverage.
12. Bank Charges
Unless otherwise specified, in case of payment through bank,
respective bank charges shall be to respective account.
13. Offer Validity
The vendor's offer shall be valid for acceptance for a period of
90 days from the final due date of the enquiry.
14. Taxes & Duties
In case of applicability of Excise Duty (ED), relevant ED paid
challan-cum-invoice must accompany supplies. For claiming Sales
Tax, particulars of Sales Tax registration certificate shall be
furnished alongwith invoices.
Statutory variation in taxes & duties within the contractual
delivery period shall be borne by NRL.
However, in case of delay on a/c of vendor, any new or
additional taxes & duties imposed after the contractual delivery
date shall be borne by the vendor.
NRL's CST Regd. No. : 18329903946 PAN No. : AAA CN 6984B
Excise Regd. No. : AAACN6984BXM001;
NRL#s VAT Regn No under Assam VAT : 18190032390
NRLs Service Tax Registration No : AAACN6984BST001
15. Delivery Period & Delayed Delivery
The delivery period quoted/agreed shall be strictly followed.
Failing supplies in time, NRL reserves the right to cancel the
order and take alternative procurement action solely at the risk
and cost of the vendor.
In case of delay in execution of the order, NRL may at its
option, recover from the vendor price reduction of 0.5% of the
value of delayed goods per week of delay or part thereof subject
to a maximum of 5% of the total order value of goods.
Contd…4
Page…4
16. Repeat Order
Repeat Order shall be acceptable to the vendor within 6 months
from the date of the Basic Order at the same prices, terms &
conditions as that in the Basic Order.
17. Part Order
Part Order shall be acceptable to the vendor. However, the
quantity mentioned in the enquiry documents for each item shall
be ordered on one vendor. All applicable lumpsum charges, if
any, shall be pro-rata on value basis.
18. Changes in Terms & Conditions
NRL reserves the right to make changes at any time in quantities
of items ordered or in specification and drawings. If such
changes cause an increase or decrease in the amount due or in
the delivery period, an equitable adjustment shall be made. Any
claim for adjustment under this provision must be assessed
within 10 days from the date when the changes are ordered.
19. Right of Rejection
NRL reserves the unfettered right to reject any or all offers
without assigning any reasons thereof.
20. Arbitration
Any dispute whatsoever in any way arising out of or relating to
a Purchase Order shall be referred to arbitration of the Chief
Executive of Numaligarh Refinery Limited or, to the sole
arbitration of some person nominated by him. There shall be no
objection if the arbitrator so appointed happens to be an
employee of NRL. The award of the arbitrator shall be final,
conclusive and binding on all parties.
21. Jurisdiction
Any dispute relating to the purchase of goods between NRL and
vendor shall be subject to the jurisdiction of a Court of Law
situated in the State of Assam.
22. Acceptance of Order
In the event of order being placed, the vendor shall acknowledge
receipt and acceptance in toto to the Purchase Order by signing
and returning the duplicate copy within 10 days from the date of
the order, failing which, the Purchase Order shall be deemed to
have been accepted by the vendor in toto.
Contd…5
Page…5
23. Distribution of Documents
Invoices and other original despatch documents in case of direct
payment and advance copies of despatch documents in case of
thro' Bank payments, shall be sent to the Finance, Commercial &
Materials Deptt. of NRL individually.
24. Conflict among other Terms and Conditions
In case of conflict between these General Terms & Conditions and
any other special or typed conditions agreed to for a particular
Purchase Order, the latter shall prevail to the extent
applicable.
25. Non Assignment
The Purchase Order shall not be assigned by the vendor to any
other party without prior written permission from NRL.
26. Control Regulations
Vendor shall arrange for supply and despatch in strict
conformity with the control regulations applicable and after
obtaining permits, if any, under the regulations in force from
time to time.
27. Govt. Policy
The existing policy of the Government of India with regard to
Purchase Preference to Public Sector Enterprises shall be
applicable.
Comm Questionnaires Page 1 of 2
Annexure - 9
Commercial Questionnaire
RATE CONTRACT FOR SUPPLY OF GATE, GLOBE AND CHECK VALVES FOR BPCL - MUMBAI REFINERY, BPCL - KOCHI REFINERY AND NRL – NUMALIGARH REFINERY
REF : CRFQ NO. 1000246245, E-tender no. 9009.
Vendor Name: M/s. _______________________________________________________________
Enquiry No.______________________________________________________________________
Vendor’s Offer Ref. No. : ___________________________________________________________
Tel No. ____________________________________ Fax No._____________________________
Contact Person : ______________________________E-Mail _____________________________
1. DULY SIGNED & STAMPED COPIES OF THIS “QUESTIONNAIRE”, WITH ALL THE CLAUSES
DULY CONFIRMED/ PRECISELY REPLIED TO BY THE VENDOR, SHALL BE UPLOADED WITH EACH AND EVERY SET OF VENDOR'S UNPRICED QUOTATION.
2. ALL COMMERCIAL TERMS ARE GIVEN/CONFIRMED IN THE QUESTIONNAIRE ITSELF AND NOT ELSEWHERE IN THE QUOTATION. IN CASE OF CONTRADICTION, THE SAME GIVEN HEREIN SHALL PREVAIL.
3. FAILURE ON THE PART OF VENDOR IN SUBMITTING THIS DULY FILLED-UP "QUESTIONNAIRE WITH UNPRICED BID AND/OR UPLOADING / SUBMITTING INCOMPLETE REPLIES MAY LEAD TO REJECTION OF VENDOR'S QUOTATION”
4. YOUR OFFER SHALL BE IN TOTAL COMPLIANCE WITH RFQ DOCUMENTS CONTAINING COMMERCIAL AND TECHNICAL SPECIFICATIONS INCLUDING GENERAL / TECHNICAL NOTES AND SCOPE OF SUPPLY INCLUDING DOCUMENTATION AND SUBSEQUENT TECHNICAL/COMMERCIAL AMENDMENT AND TECHNICAL/COMMERCIAL CORRIGENDUM, IF ANY.
S.No DESCRIPTION VENDOR’S CONFIRMATION
1
Bid rejection criteria: Bidders shall note the bid rejection criteria as indicated in ITB. Provisions of these clauses must be adhered to without any deviations, failing which the bid shall be considered to be non-responsive and may be rejected.
Noted
2 Bid Validity period: Confirm Offer validity of 120 days from final bid due date.
Confirmed / Not Confirmed refer deviation sheet
3 Defects Liability Period: Confirm acceptance of defect liability period clause as indicated in Special Purchase Conditions.
Accepted / Not accepted refer deviation sheet
4 Performance Bank Guarantee: Confirm acceptance of performance guarantee clause as indicated in Special Purchase Conditions & General Purchase Conditions.
Accepted / Not accepted refer deviation sheet / Not applicable
5 Delivery Period : 12 (Twelve) weeks from the date of Call off / Purchase Order, on FOT Site basis. For detailed refer Special Purchase Conditions (SPC)
Accepted / Not accepted refer deviation sheet
6
Payment Terms: 100% payment shall be made within 30 days from date of receipt and acceptance of materials at Site against submission of Performance Bank Guarantee (PBG) for 10% of basic order value. For detailed refer Special Purchase Conditions (SPC).
Accepted / Not accepted refer deviation sheet
7 Prices have been furnished as per “Format For Submitting Price”.
Furnished / Not furnished refer deviation sheet
8 Delayed Delivery: For detailed clause refer General Purchase Conditions (GPC).
Accepted / Not accepted refer deviation sheet
9 Firmness of prices: Quoted prices shall remain firm and fixed till complete execution of the order.
Noted & Confirmed
Comm Questionnaires Page 2 of 2
S.No DESCRIPTION VENDOR’S CONFIRMATION
10 The quoted base rate shall include all expenses towards all testing charges, PMI testing etc. TPI charges shall be indicated separately as detailed indicated in SPC.
Noted & Confirmed
11 Confirm that the prices quoted are without any price variation clause.
Confirmed / Not confirmed refer deviation sheet
12 Arbitration Clause: Confirm acceptance of Arbitration Clause as indicated in General Purchase Conditions (GPC).
Accepted / Not accepted refer deviation sheet
13
Printed terms and conditions, if any, appearing in quotation, shall not be applicable in the event of order. In case of contradiction between the confirmations given above and terms & conditions mentioned elsewhere in the offer, the confirmation given herein above shall prevail.
Confirmed & Accepted
14 Confirm that integrity pact is duly signed & submitted without any deviations.
Confirmed & Accepted
15
Whether any of the Directors of Vendor is a relative of any Director of BPCL or the vendor is a firm in which any Director of BPCL or his relative is a Partner or the vendor is a private company in which any director of BPCL is a member or Director.
16 Confirm that Prices quoted are on FOT Dispatch point basis. Confirmed
17 Material is required at BPCL warehouse/site on door delivery basis.
Accepted / Not accepted refer deviation sheet
18 Specify Despatch Point for indigenous bidders to Supply Materials.
Material shall be despatched from :____________________ State:____________________
19 Confirm BPCL holiday listing Policy for vendors. Referred web link given below: https://bharatpetroleum.in/pdf/holidaylistingpolicyfinal.pdf
Confirmed & Accepted
20 Transit risk insurance shall be covered by BPCL and the same has not been included in the quoted prices.
Noted and confirmed
21 Freight charges: Bidders to quote freight charges in terms of % of basic quoted price.
Accepted / Not accepted refer deviation sheet
22 Octroi Charges if quoted by the bidder, same shall be paid by Supplier and will be reimbursed by BPCL on submission of original documentary proof. (For MR only)
Accepted
23
Please confirm, whether your company is Micro and Small Enterprises (MSEs) and MSEs owned by Scheduled Caste (SC) or the Scheduled tribe (ST) entrepreneurs.
YES / NO
If Yes, Pl submit :
• Self-attested copy of all the pages of the EM-II certificate issued by the appropriate authorities mentioned in the Public procurement policy of MSEs-2012.; and
• Vendors declaration / affidavit in their Organization/ Company Letter Head, stating that, in the event of award of contract, all the ordered supplies shall be made from the unit for which MSE certificate has been submitted
(Signature of Vendor with Company seal) Name of the Authorised Signatory : Designation : Date :
Annexure – 10 RATE CONTRACT FOR SUPPLY OF GATE, GLOBE AND CHECK VALVES FOR BPCL -
MUMBAI REFINERY, BPCL - KOCHI REFINERY AND NRL – NUMALIGARH REFINERY
REF : CRFQ NO. 1000246245, E-tender no. 9009
APPLICABLE CHARGES, TAXES, DUTIES, FREIGHT ETC.
Bidders are requested to fill these data in our
e-procurement portal.
ANNEXURE-11
DEVIATION FORM (TECHNICAL) SUB : RATE CONTRACT FOR SUPPLY OF GATE, GLOBE AND CHECK
VALVES FOR BPCL-MUMBAI REFINERY, BPCL-KOCHI REFINERY AND NRL-NUMALIGARH REFINERY.
REF : CRFQ NO. 1000246245, E-tender no. 9009. Name of vendor: Schedule of Deviations in reference to BPCL SPECIFICATIONS 1. Vendor may give here a consolidated list of technical deviations for all sections of
the SPECIFICATIONS, which for an appropriate offer is considered unavoidable by him.
2. Deviations mentioned elsewhere in the offer shall not be taken cognizance by the COMPANY and any such deviations if indicated elsewhere other than this form will render the offer non-responsive and shall liable to be rejected.
3. Vendor shall state the reasons for the deviations in the `Remark' column. 4. All other clauses of the SPECIFICATIONS (not mentioned in this form) shall be
deemed to be fully complied by the vendor 5. Only the deviations listed herein, in conjunction with the SPECIFICATIONS, shall
constitute the contract requirements for the award of job to the vendor.
Sr. No.
Annexure- No.
Clause No.
Requirement of the BPCL
SPECIFICATIONS
Deviations to the SPECIFICATIONS
Remarks
1 2 3 4 5 6
Vendor Signature of the authorized signatory : Name of the authorized signatory : Stamp & Date :
ANNEXURE-12
DEVIATION FORM (COMMERCIAL) SUB : RATE CONTRACT FOR SUPPLY OF GATE, GLOBE AND CHECK
VALVES FOR BPCL-MUMBAI REFINERY, BPCL-KOCHI REFINERY AND NRL-NUMALIGARH REFINERY.
REF : CRFQ NO. 1000246245, E-tender no. 9009. Name of vendor: Schedule of Deviations in reference to COMMERCIAL TERMS AND CONDITIONS 1. Vendor may give here a consolidated list of Commercial deviations for all
sections of the tender document, which for an appropriate offer is considered unavoidable by him.
2. Deviations mentioned elsewhere in the offer shall not be taken cognizance by the COMPANY and any such deviations if indicated elsewhere other than this form will render the offer non-responsive and shall liable to be rejected.
3. Vendor shall state the reasons for the deviations in the `Remark' column. 4. All other clauses of the COMMERCIAL TERMS AND CONDITIONS (not
mentioned in this form) shall be deemed to be fully complied by the PCMS vendor
5. Only the deviations listed herein, in conjunction with the COMMERCIAL TERMS AND CONDITIONS, shall constitute the contract requirements for the award of job to the vendor.
Sr. No.
Annexure- No.
Clause No.
Commercial terms and conditions
Deviations Remarks
1 2 3 4 5 6
Vendor
Signature of the authorized signatory : Name of the authorized signatory : Stamp & Date :
BUSINESS RULES FOR ON LINE REVERSE AUCTION
Page 1 of 11
Annexure-14
(BASIC DETAILS)
Buyer Name
Bharat Petroleum Corporation Ltd. (CPO Refineries) Mumbai.
Service Provider Details
M/s. Phone No. : Fax No. : Company Website: Intimated later
Date & Time of Auction
Auction Date : Will be intimated later Online Reverse Auction Time : Will be intimated later (**Limited/ Unlimited extensions ) Auction Website: Will be intimated later
Documents Attached
1) Business rule for reverse auction 2) Terms & conditions of reverse auction 3) Online Reverse Auction Schedule (Appendix – I) 4) Process Compliance Statement (Appendix – II) 5) Price Confirmation (Appendix – III) 6) Contact Information
SPECIAL INSTRUCTIONS
Bidding in the last minutes and seconds should be avoided in the bidders own interest. Neither BPCL nor Service Provider will be responsible for any lapses / failure on the part of the bidder, in such cases.
BUSINESS RULES FOR ON LINE REVERSE AUCTION
Page 2 of 11
GENERAL TERMS & CONDITIONS
Against this Enquiry for the subject item/system with detailed scope of supply as per our specification, BPCL, CPO Refineries, Mumbai may resort to “Online Reverse Auction Mode” i.e. ONLINE BIDDING on INTERNET.
1. For the proposed Reverse Auction, technically and commercially acceptable bidders only shall be eligible to participate.
2. BPCL has engaged the services of a Service Provider, who will provide all necessary training and assistance before commencement of on line bidding on Internet.
3. BPCL will inform the bidders in writing, the details of the Service Provider in case of Reverse Auction, so as to enable them to contact the Service Provider and get trained.
4. Information like the Business rules, Reverse Auction event date, time, start price, bid decrement, extensions, etc. also will be communicated through the Service Provider for the compliance of the bidders.
5. Bidders have to email a scanned copy of the Process Compliance Form (Appendix - II) in the prescribed (provided by service provider) before start of Online Reverse Auction. Without this Compliance form, the bidders will not be eligible to participate in the online event.
6. BPCL will provide the calculation sheet (e.g.: EXCEL sheet) which will help to arrive at “total effective Cost to BPCL” for each the bidders to enable them to fill-in the price and keep it ready for keying in during the Reverse Auction.
7. Online Reverse Auction will be conducted on schedule date & time.
8. At the end of Reverse Auction event, the lowest bidder value will be known on the network for each item at each location.
9. The lowest bidder has to email a scanned copy of the price break-up duly signed, filled in prescribed format (as per BPCL’s price excel sheet format), as provided on case-to-case basis, to BPCL through Service Provider within 24 hours of the Reverse Auction without fail.
10. Any variation between the on-line bid value and signed document will be considered as sabotaging the tender process and will invite disqualification of bidder to conduct business with BPCL as per prevailing procedure.
11. Bidders shall note that in case BPCL conducts the Reverse Auction and finalizes this tender, the Sealed Priced-Bids submitted with the offer will not be opened.
12. In case BPCL decides not to conduct Reverse Auction, the Sealed Priced-Bids submitted with the offer, along with price impacts (if any) already available with BPCL, shall be opened as per BPCL standard practice for finalization of the tender.
13. Similarly, if for any unforeseen reason the Reverse Auction is conducted by BPCL for this particular tender and the results are found to be inconclusive by BPCL, then BPCL may open the Sealed Priced-Bids submitted with the offer, along with price impacts (if any) already available with BPCL, and finalize the tender as per BPCL standard practice.
14. Only those vendors, who submit their Process Compliance Form, will be eligible to participate in the Online English Reverse Auction.
15. The Reverse Auction will be treated as closed only when the bidding process gets closed in all respects for the items listed in the tender.
BUSINESS RULES FOR ON LINE REVERSE AUCTION
Page 3 of 11
MODALITY FOR FINALIZATION OF THE PROCUREMENT BPCL may finalize the procurement of the item against this Tender through online Reverse Auction mode. BPCL shall make arrangement with. (Name of the Service Provider), who shall be BPCL’s authorized Service Provider(SP) for the same. Please go through the guidelines given below and submit your acceptance to the same along with your Commercial Bid. 1. Computerized reverse auction shall be conducted by BPCL, on pre-specified date, while
the vendors shall be quoting from their own offices / place of their choice. Internet connectivity & other necessary requirements like power backup etc. shall have to be ensured by vendors themselves. In order to ward-off such contingent situation where the vendors are not able to bid for any of the above reason, they are requested to make all the necessary arrangements / alternatives whatever required so that they are able to circumvent such situation and still be able to participate in the reverse auction successfully. Failure of power / problem in Internet connectivity at the premises of vendors during the Online Reverse auction cannot be the cause for not participating in the reverse auction. On account of this, the time for the auction cannot be extended and neither BPCL nor SP is responsible for such eventualities.
2. Service provider shall arrange to train your nominated person (s), without any cost to you. They shall also explain you, all the Rules related to the Reverse Auction / Business Rules to be adopted along with the calculation sheet in excel format. You are required to give your compliance on it at least 24 hours before the start of bid process.
3. Material for Bid: Respective CRFQ No._____
4. Starting price & Bid Decrement: The start price applicable in the Online Reverse Auction for described item shall be visible to all bidders on their screen. (i.e. Starting basic Cost and bid decrement value will be displayed). This start price will be derived through BPCL’s internal estimation processes.
5. Bidding Currency & Unit of Measurement: Bidders will enter price in their respective currency while evaluation will be conducted in Indian Rupees (INR) & the Unit of Measurement will be per Meter The price bid placed during the Online Reverse Auction shall be the price of respective CRFQ.
6. Bid Price: The Bidder has to quote as per excel sheet provided by BPCL.
The bidders are requested to note that the ranking would be generated on the condition that the bid submitted by the bidder is confirming to the Starting price & Minimum Decrement Value.
Calculation sheet in excel format to arrive at the Total Effective Cost to BPCL will be provided by Service provider.
7. The technical & commercial terms are as per respective CRFQ , Vendors’ technical and commercial bid and subsequent correspondences between BPCL and the vendors regarding commercial terms & conditions.
8. Validity of Bids: As per BPCL respective CRFQ doc. & agreed terms 9. Delivery: As per BPCL Respective CRFQ doc. & agreed terms
BUSINESS RULES FOR ON LINE REVERSE AUCTION
Page 4 of 11
10. At the end of the reverse auction, bidder has to provide a detailed break-up (as per BPCL’s price excel sheet format) to SP for his lowest accepted offer quoted during the Online Reverse Auction within 24 hours of the completion of the Online Reverse Auction.
11. Procedure of Online Reverse Auctioning:
i. Online English Reverse Auction: BPCL will declare its Start price, which shall be visible to the all vendors during the start of the Online Reverse Auction on their respective bidding screens. Please note that the start price of Online Reverse Auction is open to all the participating bidders. Any bidder can start bidding, in the Online Reverse Auction; from the start price itself. On submission of the bid, the rank would be generated for the item. Also, please note that the first online bid that comes in the system during the Online Reverse Auction can be equal to the auction's start price, or lesser than the auction's start price or by at least one decrement, or lesser than the same. The second online bid for any particular item and onwards which the bidder submits will have to be lesser than the respective bidder’s previous bid by at least one decrement value, or lesser than the same. Decrement in multiple would be “No”.
ii. Online English Reverse Auction shall be for a period of 45 minutes. If a bidder places a Bid in the last 5 minutes of Closing of the Auction, the auction shall get extended automatically for another 5 minutes. So, reverse auction will be continued till bid comes in last remaining 5 min. In case, there is no Bid in the last 5 minutes of closing of Auction, the Auction shall get closed automatically without any extension.
iii. After the completion of Online Reverse Auction, the Closing Price shall be available for further processing.
12. Successful vendor shall be required to submit the final prices, quoted during the Online
Reverse Auction, as per BPCL’s price excel sheet format, after the completion of Auction to SP, within 24 hours of the reverse auction, duly signed and stamped on their letterheads as token of acceptance without any new condition other than those already agreed to before start of auction. The Original Copy of the Price Breakup (as per excel sheet) & Price Confirmation (appendix III) should be submitted to the Service provider within 3 days of the completion of the Online Reverse Auction.
13. During the Online Reverse Auction, if no bid is received in the auction system / website
within the specified time duration of the reverse auction, then BPCL at its discretion, may decide to revise the auction's Start Price / scrap the online reverse auction process / proceed with the conventional mode of tendering / any other method as deem fit. The decision of BPCL in this regard will be final & binding on all the vendors.
14. Your bid will be taken as an offer to supply. Bids once made by you, cannot be
cancelled / withdrawn and you shall be bound to supply as mentioned above at your final bid price. Should you back out and not supply as per the rates quoted, BPCL shall take action as appropriate.
15. Login Name & Password: Each Bidder is assigned a Unique User Name & Password by
Service Provider. You are advised to change the Password and edit the information in the Registration Page after the receipt of initial Password from Service provider to ensure confidentiality. All bids made from the Login ID given to you will be deemed to have been made by your company
BUSINESS RULES FOR ON LINE REVERSE AUCTION
Page 5 of 11
16. Visibility to the Bidder: The respective bidder will be able to view the following on their screen along with the necessary fields in the Online Reverse Auction:
a. Bid Placed by you. b. Your Own Rank. c. Start Price & Minimum Bid Decrement value. d. Least Effective Cost(L1) of reverse auction quoted by the bidder
17. Lowest Bid of a Bidder: In case the bidder submits more than one bid, the lowest accepted bid will be considered as the bidder’s final offer to execute the work.
18. At the end of the Reverse Auction, BPCL will decide upon the successful bidder. BPCL’s
decision on award of Contract shall be final and binding on all the Bidders. 19. BPCL shall be at liberty to cancel the Online Reverse Auction process / tender at any
time, before ordering, without assigning any reason. 20. Other terms and conditions shall be as per your techno-commercial offers and other
correspondences till date. 21. You are required to submit your acceptance (Process Compliance Form – (Appendix – II))
before participating in the reverse auction.
22. Auction shall be on final bid basis without consideration of e-sealed price bid
submitted by you in e-bid system. All other terms and conditions shall be as per
the RFQ/ Offer/As agreed upon.
BUSINESS RULES FOR ON LINE REVERSE AUCTION
Page 6 of 11
BIDDERS TO SPECIFICALLY NOTE
1. The Bidder shall not involve himself or any of his representatives in Price manipulation of any kind by directly or indirectly communicating with other suppliers / bidders.
2. The Bidder shall not divulge either his Bids or any other exclusive details of BPCL to
any other party.
3. BPCL’s decision on award of Contract shall be final and binding on all the Bidders. Conducting Online Reverse Auction is not binding on BPCL for ordering. BPCL reserve the right for ordering & May / may not order for any / all the lot for which reverse auction is being held.
4. BPCL along with Service provider can decide to extend, reschedule or cancel
Auction. Any changes made by BPCL and / or the Service Provider, after the first posting will have to be accepted if the Bidder continues to access the site after that time.
5. BPCL & Service provider shall not have any liability to Bidders for any interruption
or delay in access to the site irrespective of the cause.
6. BPCL & Service provider are not responsible for any damages, including damages that result from, but are not limited to negligence.
7. BPCL & Service provider will not be held responsible for consequential damages,
including but not limited to systems problems, inability to use the system, loss of electronic information etc.
N.B.
- All the Bidders are required to submit the Process Compliance Form (Appendix - II) duly signed to the Service Provider, at least 24 hours before the auction date. After the receipt of the Process Compliance Form, Login ID & Password shall be allotted to the suppliers (bidders).
- All the bidders are requested to ensure that they have a valid digital certificate well in advance to participate in the online event. Under no circumstances will the bidders be allowed to participate in the online event without Digital Certificate.
- After the completion of the Auction event, all the Bidders have to submit the Price
Break-up (as per BPCL’s price excel sheet format) within 24 hours of the reverse auction to the Service Provider for further proceedings.
BUSINESS RULES FOR ON LINE REVERSE AUCTION
Page 7 of 11
APPENDIX – I The List of Items to be procured along with the Auction Start Time & Close Time is as follows: Item Description: Respective CRFQ No..
Date: - Will be intimated later.
Description Start Time End Time
CRFQ No.
** Auto Extensions as applicable
BUSINESS RULES FOR ON LINE REVERSE AUCTION
Page 8 of 11
APPENDIX – II
PROCESS COMPLIANCE FORM (The bidders are required to print this on their company’s letterhead, sign & stamp before emailing a scanned copy)
To, Service Provider Sub: Agreement to the Process related Terms and Conditions for the Reverse Auction Dear Sir, This has reference to the Business Rules and Terms & Conditions for the Online Reverse Auction mentioned in this document for respective CRFQ for supply of….. This letter is to confirm that:
1) The undersigned is authorized representative of the company. 2) We have studied the Commercial Terms and the Business rules governing the Reverse
Auction as mentioned in your letter and confirm our agreement to them. 3) We also confirm that we have taken the training on the auction tool and have
understood the functionality of the same thoroughly. 4) We have studied the calculation sheet carefully as per our offer submitted to BPCL. We
also confirm that we will email a scanned copy or fax the price break-up of our online quoted price, within 24 hours of the reverse auction, as per BPCL’s price excel sheet format.
5) We confirm that we will send the Original copy of the Price Breakup to Service provider within 3 working days of the completion of the Online Reverse Auction.
6) We, hereby, confirm that we will honor the Bids placed by us during the Online Reverse Auction process.
7) We also confirm that we will accept our Rank / Position that will be displayed when the Bidding Time is over of the Online Reverse Auction.
8) We confirm that we have changed the password on the auction website after first log in.
9) We also confirm that we have a valid digital certificate issued by a valid Certifying Authority.
With regards, Signature with company seal Name –Company / Organization – Designation within Company / Organization – Address of Company / Organization –
BUSINESS RULES FOR ON LINE REVERSE AUCTION
Page 9 of 11
APPENDIX – III
PRICE CONFIRMATION (The bidders are required to print this on their company’s letterhead, sign & stamp before emailing a scanned copy)
To, Service provider Sub: Final price quoted during Online Reverse Auction and Price Break up Ref: respectiva CRFQ No. for supply of…. Dear Sir, We confirm that we have quoted for CRFQ No. for supply of…. As detailed below.
CRFQ Item No. & Description Quoted Basic Value of the material Effective Cost of Material
as our prices during the Online Reverse Auction conducted on : The detailed price break-up as per the BPCL excel sheet format enclosed. Thanking you and looking forward to the valuable order from BPCL. Yours sincerely, For _________________ Name: Company: Date: Seal:
BUSINESS RULES FOR ON LINE REVERSE AUCTION
Page 10 of 11
CONTACT INFORMATION
Service Provider
Bharat Petroleum Corporation Limited,
Mumbai Refinery Mumbai
H.P. Panchal Manager (CPO-R) Tel. No.: 022 – 2552 4129 E-Mail: [email protected]
BUSINESS RULES FOR ON LINE REVERSE AUCTION
Page 11 of 11
BHARAT PETROLEUM CORPORATION LIMITED
Central Procurement Organisation (Refineries)
SUB : RATE CONTRACT FOR SUPPLY OF GATE, GLOBE AND CHECK
VALVES FOR BPCL-MUMBAI REFINERY, BPCL-KOCHI REFINERY
AND NRL-NUMALIGARH REFINERY.
REF. : CRFQ NO. 1000246245, E-tender No. 9009
ACCEPTANCE OF BUSINESS RULES FOR ON LINE REVERSE
AUCTION
We, M/s. __________________________________________________ having office at
______________ read BUSINESS RULES FOR ON LINE REVERSE AUCTION and
confirm our acceptance to all the terms and conditions as mentioned herein in the
document except for deviations mentioned in the deviation form.
Deviations : YES / NO
(Bidder to tick)
If yes, same is mentioned in Annexure-8 i.e. TECHNICAL DEVIATION FORM and
Annexure-9 i.e. COMMERCIAL DEVIATION FORM.
Date : Signature of Authorised Signatory
with Name & designation and Co. Seal.
Name & full address of the Firm :
M/s. _______________________
Annexure – 15
RATE CONTRACT FOR SUPPLY OF GATE, GLOBE & CHECK VALVES FOR BPCL -
MUMBAI REFINERY, BPCL - KOCHI REFINERY and NRL-NUMALIGARH REFINERY
REF :- CRFQ NO. 1000246245, E-tender no. 9009
• LIST OF ITEMS WITH DETAIL DESCRIPTION &
SPECIFICATION OF THE ITEMS.
• BPCL AES-STANDARD SPECIFICATIONS.
• EIL SPECIFICATIONS
This Annexure is only for detail descriptions &
specifications of the items. Bidders are requested not to
fill any prices, taxes, duties, freight etc. in this Annexure.
Notes :
• Bidders to quote based on latest revision no. based
on BPCL AES Standard only.
• For Hydrogen service special requirement, refer
BPCL AES-3703 Rev.0 specification.
_______________________________________________________________________Subject: RATE CONTRACT FOR GATE, GLOBE & CHECK VALVES FOR MR, KR AND NRL
Kind Attn:
Please quote your lowest prices for the supply of materials/services as per
details given below. The quotation shall show separately and clearly (without
any corrections) the basic price, discount (%), packing & forwarding (%),
excise duty (with relevant excise tariff no./chapter id), sales tax (VAT/CST),
freight(%),Service tax,other charges, etc against each item separately, as
applicable.
Foreign vendors shall always quote their FOB prices against each item.
Rates/charges quoted in the quotation shall be final and no additional
charges/corrections will be accepted after the receipt of quotation unless the
same is necessitated by BPCL in writing.
The quotation shall be put in a sealed envelope superscribed as "QUOTATION FOR
BPCL COL.No.1000246245 and sent to us before due date & time.
_______________________________________________________________________ Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________00010 77.11.01.491.5 100 Piece
VLV CHK THD 800# CS Tr13CR 15NB 28.02.2018
VLV CHK THD 800# CS TR13CR 15NB
Design-spec BS 5352
Type-of-cover BOLTED
Type-of-pattern --
Type-of-bore FULL
End-connection-s ANSI B2.1
End-connection-s NPT
Pressure-designation-ASME-C 800
Fugitive-emission-tightness-cl --
Fugitive-emission-endurance-cl --
Fugitive-emission-temp-class --
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13CHROMIUM
Mat-spec-body-cover ASTM A105 NORMALISED
Mat-spec-piston ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Type-of-gasket-cover SPIRAL WOUND/ JACKETED
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spw-filler CAF
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
To,
BPCL ESTIMATE
MUMBAI . India - 400038.
Ph:,Fax:.
Vendor Code:300648
Quotation Due Date/Time:04.01.2016/13:00:00
For Bharat Petroleum Corporation Ltd.Vendor Sign & Stamp
REQUEST FOR QUOTATION Collective RFQ Number/ Purchase Group
1000246245 / N52-Ref CPO Proc GR 2
Contact person/Telephone
PANCHAL H P/022-25524129
Fax : -
Email:[email protected]
Our ref.:
RFQ No/Date: 6000892209 / 10.12.2015
Page 1 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3372 REV.3
Size-NB 15
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00020 77.11.01.491.7 100 each
VLV CHK TH 800# CS TR13CR 15NB 28.02.2018
Valves,Check,Piston type, bolted cover,Threaded
Design-spec BS 5352
Type-of-cover BOLTED
Type-of-pattern --
Type-of-bore STD
End-connection-s ASME B2.1
End-connection-s NPT
Pressure-designation-ASME-C 800
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROMIUM
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spw-filler SS304+CAF
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts EIL SPEC.SHEET NO:53024
Size-NB 15
BODY SEAT RING:TYPE:RENEWABLE,
ENDS: SCRD.TO B2.1(FEMALE)/B1.20.1,
INSPECTION TO BS6755(PART-I)
CONFIRMING TO BS 5352(STD BORE)
Unit Basic Rate (In Words) : ____________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 2 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00030 77.11.01.496.5 64 Piece
VLV CHK THD 800# CS Tr13CR 20NB 28.02.2018
VLV CHK THD 800# CS TR13CR 20NB
Design-spec BS 5352
Type-of-cover BOLTED
Type-of-pattern --
Type-of-bore FULL
End-connection-s ANSI B2.1
End-connection-s NPT
Pressure-designation-ASME-C 800
Fugitive-emission-tightness-cl --
Fugitive-emission-endurance-cl --
Fugitive-emission-temp-class --
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13CHROMIUM
Mat-spec-body-cover ASTM A105 NORMALISED
Mat-spec-piston ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Type-of-gasket-cover SPIRAL WOUND/ JACKETED
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spw-filler CAF
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3372 REV.3
Size-NB 20
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 3 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00040 77.11.01.496.7 60 each
VLV CHK TH 800# CS TR13CR 20NB 28.02.2018
Valves,Check,Piston type, bolted cover,Threaded
Design-spec BS 5352
Type-of-cover BOLTED
Type-of-bore STD
End-connection-s ASME B2.1
Pressure-designation-ASME-C 800
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROMIUM
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spw-filler SS304+CAF
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts EIL SPEC.SHEET NO:53024
Size-NB 20
BODY SEAT RING:TYPE:RENEWABLE,
ENDS: SCRD.TO B2.1(FEMALE)/B1.20.1,
"INSPECTION TO BS6755(PART-I)
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 4 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Other charges (if any ) : Please specify separately
_______________________________________________________________________00050 77.11.01.497.7 10 each
VLV CHK S 800# CS TR13CR 20NB 28.02.2018
Valves,Check,Piston type, bolted cover,Socket weld
Design-spec BS 5352
Pressure-designation-ASME-C 800
Type-of-bore STD
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Mat-body-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-piston ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler SS304/CAF
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7 & ASTM A194
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53005
Size-NB 20
BODY SEAT RING:RENEWABLE 13% CR.STL CONFORMING,
VALVE CHECK LIFT CHECK TYPE,ENDS-6000#
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00060 77.11.01.501.5 24 Piece
VLV CHK THD 800# CS Tr13CR 25NB 28.02.2018
VLV CHK THD 800# CS TR13CR 25NB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 5 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Design-spec BS 5352
Type-of-cover BOLTED
Type-of-pattern --
Type-of-bore FULL
End-connection-s ANSI B2.1
End-connection-s NPT
Pressure-designation-ASME-C 800
Fugitive-emission-tightness-cl --
Fugitive-emission-endurance-cl --
Fugitive-emission-temp-class --
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13CHROMIUM
Mat-spec-body-cover ASTM A105 NORMALISED
Mat-spec-piston ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Type-of-gasket-cover SPIRAL WOUND/ JACKETED
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spw-filler CAF
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3372 REV.3
Size-NB 25
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00070 77.11.01.506.5 24 Piece
VLV CHK THD 800# CS Tr13CR 40NB 28.02.2018
VLV CHK THD 800# CS TR13CR 40NB
Design-spec BS 5352
Type-of-cover BOLTED
Type-of-pattern --
Type-of-bore FULL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 6 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________End-connection-s ANSI B2.1
End-connection-s NPT
Pressure-designation-ASME-C 800
Fugitive-emission-tightness-cl --
Fugitive-emission-endurance-cl --
Fugitive-emission-temp-class --
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13CHROMIUM
Mat-spec-body-cover ASTM A105 NORMALISED
Mat-spec-piston ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Type-of-gasket-cover SPIRAL WOUND/ JACKETED
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spw-filler CAF
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3372 REV.3
Size-NB 40
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00080 77.11.03.492.5 68 Piece
VLV CHK SW IBR 800# CS TrCS/ST 15NB 28.02.2018
Design-spec BS 5352
Service IBR
Pressure-designation-ASME-C 800
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Mat-body-cover CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-piston CARBON STEEL/STELLITED
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 7 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53002
Size-NB 15
LIFT CHECK TYPE
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00090 77.11.03.498.5 42 Piece
VLV CHK SW IBR 800# CS TrCS/ST 20NB 28.02.2018
Design-spec BS 5352
Service IBR
Pressure-designation-ASME-C 800
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Mat-body-cover CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-piston CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53002
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 8 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Size-NB 20
LIFT CHECK TYPE
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00100 77.11.03.501.5 22 Piece
VLV CHK SW 800# CS TrCS/ST 25NB 28.02.2018
Design-spec BS 5352
Pressure-designation-ASME-C 800
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Mat-body-cover CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-piston CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53001
Size-NB 25
LIFT CHECK TYPE
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 9 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00110 77.11.03.502.5 70 Piece
VLV CHK SW IBR 800# CS TrCS/ST 25NB 28.02.2018
Design-spec BS 5352
Service IBR
Pressure-designation-ASME-C 800
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Mat-body-cover CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-piston CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53002
Size-NB 25
LIFT CHECK TYPE
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 10 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Other charges (if any ) : Please specify separately
_______________________________________________________________________00120 77.11.03.503.5 8 Piece
VLV CHK SW CAS 800# CS TrCS/ST 25NB 28.02.2018
Design-spec BS 5352
Service CAUSTIC AND AMINE
Pressure-designation-ASME-C 800
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Mat-body-cover CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-piston CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53013
Size-NB 25
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00130 77.11.03.507.5 50 Piece
VLV CHK SW IBR 800# CS TrCS/ST 40NB 28.02.2018
Design-spec BS 5352
Service IBR
Pressure-designation-ASME-C 800
Type-of-cover BOLTED
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 11 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-gasket-cover SPIRAL WOUND
Mat-body-cover CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-piston CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53002
Size-NB 40
LIFT CHECK TYPE
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00140 77.11.05.491.5 8 Piece
VLV CHK SW 800# CS Tr316 15NB 28.02.2018
Design-spec BS 5352
Design-rating --
Design-spec-valve-trim --
Service --
Temperature-range --
Pressure-designation-ASME-C 800
Fugitive-emission-tightness-cl --
Fugitive-emission-endurance-cl --
Fugitive-emission-temp-class --
Type-of-pattern --
Type-of-bore --
Type-of-cover --
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 12 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-gasket-cover --
Mat-body-cover CARBON STEEL
Mat-trim STAINLESS STEEL 316
Mat-body-seats --
Mat-piston --
Mat-gasket-spw-filler --
Mat-spec-body-cover --
Mat-spec-piston --
Mat-spec-body-seat-s --
Mat-spec-gasket-spw-windings --
Mat-spec-bolt-s-nut-s --
Mandatory-add-reqrmts --
Caps-code --
Identification-code --
Mass-kg --
Length-e-to-e-mm --
Size-NB 15
WITH BOLTED BONNET & SS 316 INTERNALS.
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00150 77.11.05.501.7 12 each
VLV CHK SW 800# SS SS316 25NB 28.02.2018
Valves,Check,Piston type, bolted cover,Socket weld
Design-spec BS 5352
Pressure-designation-ASME-C 800
Fugitive-emission-tightness-cl --
Type-of-bore STD
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Mat-body-cover STAINLESS STEEL
Mat-trim STAINLESS STEEL 316
Mat-body-seats STAINLESS STEEL 316
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 13 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-piston STAINLESS STEEL 316
Mat-gasket-spw-filler SS316/CAF
Mat-spec-body-cover ASTM A182 GRADE F 316
Mat-spec-piston ASTM A182 GRADE F 316
Mat-spec-body-seat-s ASTM A182 GRADE F 316
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7 & ASTM A194
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53061
Size-NB 25
ANSI ENDS SW TO 3000LBS
INSPECTION TO BS 6755(PART-1),BODY SEAT RING:RENEWABLE,
ENDS-3000#,ANSI B16.11, INSPECTION TO BS 6755(PART-I)
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00160 77.11.07.496.5 154 Piece
VLV CHK SW 800# CS Tr13CR 20NB 28.02.2018
VLV CHK SW 800# CS TR13CR 20NB
Design-spec BS 5352
Design-rating --
Service HYDROCARBON PRODUCTS
Temperature-range 136.2 KG/CM2G AT 28 DEG.C
Pressure-designation-ASME-C 800
Type-of-pattern --
Type-of-bore --
Type-of-cover --
Type-of-gasket-cover --
Mat-body-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats --
Mat-piston ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 14 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-body-cover ASTM A105 NORMALISED
Mat-spec-piston ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-bolt-s-nut-s --
Mandatory-add-reqrmts BPCL/R/AES-3372 REV.3
Size-NB 20
SPECIFICATION SHEET:AE-S-3372
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00170 77.11.10.491.5 10 Piece
VLV CHK SW H2 800# CS TrCS/ST 15NB 28.02.2018
VLV CHK SW H2 800# CS TRCS/ST 15NB
Design-spec BS 5352
Service HYDROGEN
Pressure-designation-ASME-C 800
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Mat-body-cover CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-piston CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53004
Size-NB 15
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 15 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________LIFT CHECK TYPE
ENDS : SW 3000 TO ANSI B16.11
LATEST REVISION AS ON 07.04.2012 : AES 3703 REV 0
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00180 77.11.10.496.5 10 Piece
VLV CHK SW H2 800# CS TrCS/ST 20NB 28.02.2018
VLV CHK SW H2 800# CS TRCS/ST 20NB
Design-spec BS 5352
Service HYDROGEN
Pressure-designation-ASME-C 800
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Mat-body-cover CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-piston CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53004
Size-NB 20
LIFT CHECK TYPE
ENDS : SW 3000 TO ANSI B16.11
LATEST REVISION AS ON 07.04.2012 : AES 3703 REV 0
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 16 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00190 77.11.10.501.7 10 each
VLV CHK SW H2 800# CS TRCS/ST 25NB 28.02.2018
VLV CHK SW H2 800# CS TRCS/ST 25NB
Valves Check Piston type bolted cover Socket weld
Design-spec BS 5352
Service HYDROGEN
Pressure-designation-ASME-C 800
Type-of-bore STD
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Spec-treatm-body-seat-facing -
Mat-body-cover CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-piston CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A105/13%CR STEEL FACING
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7 & ASTM A194
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53004
Size-NB 25
"LIFT CHECK TYPE,ENDS:SW 3000 TO ANSI B16.11,TESTING :BS 6755 (PART-1)"
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 17 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00200 77.11.10.506.7 20 each
VLV CHK SW H2 800# CS TRCS/ST 40NB 28.02.2018
VLV CHK SW H2 800# CS TRCS/ST 40NB
Valves Check Piston type bolted cover Socket weld
Design-spec BS 5352/H2 SERVICE
Service HYDROGEN
Pressure-designation-ASME-C 800
Type-of-bore STD
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Spec-treatm-body-seat-facing -
Mat-body-cover CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-piston CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A105
Mat-spec-piston ASTM A105/13%CR STEEL FACING
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7 & ASTM A194
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53004
Size-NB 40
LIFT CHECK TYPE
"ENDS:SW 3000 TO ANSI B16.11,TESTING : BS 6755 (PART-1)"
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 18 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00210 77.20.62.286.7 30 each
VLV GATE FL IBR 300# CS TR13CR 40NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Flanged
Design-spec API 600
Design-spec-end-flanges ASME B16.5 RF 125AARH
Service IBR
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Mat-gasket-spw-filler SS304+GRAFOIL
Mat-packing-stem GRAPHITED ASBESTOS
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s STELLITED
Mat-spec-bolt-s ASTM A307 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Size-NB 40MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00220 77.21.60.519.7 10 each
VLV GATE SCRD 800# CS TR13CR 20NB 28.02.2018
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 19 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________VALVES GATE,WEDGE TYPE,BOLTED BONNET,ENDS SCRD.TO B 2.1(FEMALE) DESIGN
SPEC-API 602; TEMP RANGE-75; PR DESGN -800;TYPE OF WEDGE-SOLID; TYPE OF
BONNET-BOLTED; TYPE OF BORE- FULL;TYPE OF STEM-RISING; TYPE OF BACK
SEAT-INTEGRAL.
MAT SPEC:BODY & BONNET CS-ASTM A105;MAT TRIM-ALLOY STEEL 13 CHROME A182 GRADE
F 6A; MAT STEM-ALLOY STEEL 13 CHROME A182 GRADE F 6A;MAT BODY SEATS-ALLOY
STEEL 13 CHROME A182 GRADE F 6A; WEDGE-ALLOY STEEL 13 CHROME A182 GRADE F 6A;
MAT GASKET SPW,FILLER-SS316/ CAF; MAT PACKING, STEM-GRAPHITED ASBESTOS.
MAT SPEC BOLT(S) & NUT(S)-ASTM A193 GRADE B7.
ADD REQRMTS -EIL SPEC.SHEET NO:51024
SIZE-20.
ADDL INFO-HAND WHEEL:NON RISING;STEM PACKING:TYPE: RENEWABLE / NON-RENEWABLE
VALVE OPEN ON STREAM MATERIAL:GRAPHITED ASBESTOS WITH SACRIFICAL INHIBITOR &
INCONEL WIRE REINFORCEMENT BODY SEAT RING:TYPE:RENEWABLE/NON-RENEWABLE
ENDS:SCRD.TO B2.1(FEMALE)/ B1.20.1 BODY:FORGED,INSPECTION TO API 598
CONFIRMING TO API 602.
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00230 77.21.61.514.5 258 Piece
VLV GATE SW 800# CS Tr13CR/ST 15NB 28.02.2018
Design-spec API STD 602
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat SEPARATE
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 20 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-gasket-bonnet CORRUGATED
Type-of-gasket-bonnet JACKETED
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13CHROME/STELLITED
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13CHROME/STELLITED
Mat-wedge ALLOY STEEL 13CHROME/STELLITED
Mat-gasket-spw-filler CAF
Mat-packing-stem GRAFOIL W/CORROSION INHIBITOR
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3304 REV.2
Size-NB 15
SCHEDULE : 80
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00240 77.21.61.515.5 114 Piece
VLV GATE SW 800# CS TrCS/ST 15NB 28.02.2018
VLV GATE SW 800# CS TrCS/ST 15NB
Design-spec API STD 602
Pressure-designation-ASME-C 800
Ends SW 3000 TO ANSI B16.11
Type-of-wedge SOLID
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 21 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS316/CAF FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem ASTM A182 GR F 6A
Mat-Spec-Trim ASTM A182 GR F 6A/STELLITTED
Mat-spec-wedge-body-seats ASTM A182 GR F 6A/STELLITTED
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51001
Size-NB 15MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00250 77.21.61.519.7 700 each
VLV GATE SW IBR 800# CS TR13CR/ST 20NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Socket weld
Design-spec API 602
Service IBR
Pressure-designation-ASME-C 800
Ends SW 3000 TO ANSI B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS316/ASB FILL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 22 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Mat, stem ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL-REINFOR. GRAGRAPH. ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ALLOY STEEL 13CHROME/STELLITED
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A,STELLITED
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51022
Size-NB 20MM
TESTING AP1 598
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00260 77.21.61.520.5 948 Piece
VLV GATE SW 800# CS TrCS/ST 20NB 28.02.2018
VLV GATE SW 800# CS TrCS/ST 20NB
Design-spec API STD 602
Pressure-designation-ASME-C 800
Ends SW 3000 TO ANSI B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS316/CAF FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem ASTM A182 GR F 6A
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 23 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-wedge-body-seats ASTM A182 GRA F 6A/STELLITTED
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51001
Size-NB 20MM
LOCK OPEN
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00270 77.21.61.521.5 248 Piece
VLV GATE SW IBR 800# CS TrCS/ST 20NB 28.02.2018
Design-spec API STD 602
Service IBR
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL/STELLITED
Mat-wedge CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 24 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51002
Size-NB 20
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00280 77.21.61.524.5 60 Piece
VLV GATE SW IBR 800# CS TrCS/ST 25NB 28.02.2018
VLV GATE SW IBR 800# CS TrCS/ST
Design-spec API STD 602
Service IBR
Pressure-designation-ASME-C 800
Ends SW 3000 TO ANSI B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem ASTM A182 GR F 6A STELLITTED
Mat-spec-wedge-body-seats ASTM A182 GR F 6A STELLITTED
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51002
Size-NB 25MM
LOCK OPEN
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 25 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00290 77.21.61.525.5 48 Piece
VLV GATE SW IBR 800# CS Tr13CR/ST 25NB 28.02.2018
Design-spec API STD 602
Service IBR
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet CORRUGATED
Type-of-gasket-bonnet SPIRAL WOUND
Type-of-gasket-bonnet JACKETED
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13CHROME/STELLITED
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13CHROME/STELLITED
Mat-wedge ALLOY STEEL 13CHROME/STELLITED
Mat-gasket-spw-filler CAF
Mat-packing-stem GRAFOIL W/CORROSION INHIBITOR
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3304 REV.2
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 26 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Size-NB 25
SCHEDULE : 80
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00300 77.21.61.526.5 64 Piece
VLV GATE SW 800# CS Tr13CR/ST 25NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Socket weld
Design-spec API STD 602
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet CORRUGATED
Type-of-gasket-bonnet JACKETED
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13CHROME/STELLITED
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13CHROME/STELLITED
Mat-wedge ALLOY STEEL 13CHROME/STELLITED
Mat-gasket-spw-filler CAF
Mat-packing-stem GRAFOIL W/CORROSION INHIBITOR
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 27 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3304 REV.2
Size-NB 25
SCHEDULE : 160
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00310 77.21.61.527.5 40 Piece
VLV GATE SW 800# CS TrCS/ST 25NB 28.02.2018
Design-spec API STD 602
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL/STELLITED
Mat-wedge CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51001
Size-NB 25
LOCK / CAR SEAL OPEN
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 28 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00320 77.21.61.532.5 162 Piece
VLV GATE SW 800# CS TrCS/ST 40NB 28.02.2018
VLV GATE SW 800# CS TrCS/ST 40NB
Design-spec API STD 602
Pressure-designation-ASME-C 800
Ends SW 3000LBS TO B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem ASTM A182 GR F 6A
Mat-trim ASTM A182 GR F 6A STELLITED
Mat-spec-wedge-body-seats ASTM A182 GR F 6A STELLITED
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51001
Size-NB 40MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 29 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00330 77.21.61.533.5 112 Piece
VLV GATE SW IBR 800# CS TrCS/ST 40NB 28.02.2018
VLV GATE SW IBR 800# CS TrCS/ST 40NB
Design-spec API STD 602
Service IBR
Pressure-designation-ASME-C 800
Ends SW 3000 TO ANSI B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem ASTM A182 GR F 6A STELLITTED
Mat-spec-wedge-body-seats ASTM A182 GR F 6A STELLITTED
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51002
Size-NB 40MM
LOCK OPEN
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 30 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00340 77.21.63.519.7 40 each
VLV GATE SW H2 800# CS TR13CR/ST 20NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Socket weld
Design-spec API 602
Service HYDROGEN
Temperature-range 425 DEG.C
Pressure-designation-ASME-C 800
Ends SW 3000PSI TO B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Mat-packing-stem GRAPHITED ASBESTOS W/INCONEL WIRE
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ASTM A182 GRADE F 6A/STELLITTED
Mat-body-seats ASTM A182 GRADE F 6A/STELLITTED
Mat-wedge ASTM A182 GRADE F 6A/STELLITTED
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51012
Size-NB 20MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 31 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)______________________________________________________________________________________________________________________________________________00350 77.21.63.520.7 700 each
VLV GATE SW IBR 800# CS TR13CR/ST 15NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Socket weld
Design-spec API STD 602
Service IBR
Pressure-designation-ASME-C 800
Ends SW 3000PSI TO B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWSS316+ASB
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ASTM A182 GRADE F 6A/STELLITED
Mat-body-seats ASTM A182 GRADE F 6A/STELLITED
Mat-wedge ALLOY STEEL 13CHROME/STELLITED
Mat-spec-bolt ASTM A193 GRADE B7
Mat-spec-bolt ASTM A194 GRADE 2H
Size-NB 15MM
EIL SPEC :51022
6-44-05/06/52/52A4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 32 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________00360 77.21.63.526.5 2 each
VLV GATE SW H2 800# CS TrCS/ST 25NB 28.02.2018
Name VALVE GATE
Design-spec API STD 602
Service HYDROGEN
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE/RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND SS304+GRAFOIL
Mat-body-bonnet FORGED CARBON STEEL
Mat-trim STELLITED
Mat-stem ALLOY STEEL 13 CHROME (NO CAST
Mat-body-seats STELLITED
Mat-wedge STELLITED
Mat-spec-body-bonnet ASTM A105 FORGED
Mandatory-add-reqrmts EIL SPEC. SHEET No.51012
Size-NB 25
MAT-PACKING-STEM: GRAPHITED ASB WITH
SACRIFICIAL INHIBITOR & INCONEL WIRE
REINFORCEMENT.
MAT-SPEC-BOLTS: ASTM A193 GRADE B7
MAT-SPEC-NUTS: ASTM A194 GRADE 2H
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00370 77.21.65.513.5 2,124 Piece
VLV GATE THD BB IBR 800# CS Tr13CR 15NB 28.02.2018
VLV GATE THD BB IBR 800# CS TR13CR 15NB
VLV GATE THD BB IBR 800# CS Tr13CR 15NB
Design-spec API STD 602
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 33 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-wedge SOLID
Type-of-stem RISING
Type-of-back-seat SEPARATE
Service IBR
Pressure-designation-ASME-C 800
End-connection-s NPT ASME B1.20.1
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GR F6A
Mat-trim ASTM A182 GR F6A
Mat-spec-wedge-body-seats ASTM A182 GR F6A
Type-of-gasket-bonnet SPWD SS304+ASB
Mat-packing-stem GRAFOIL W/INCONEL WIRE
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3308 REV.3
Size-NB 15MM
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00380 77.21.65.514.5 1,068 Piece
VLV GATE THD BB 800# CS Tr13CR 15NB 28.02.2018
VLV GATE THD BB 800# CS TR13CR 15NB
VLV GATE THD BB 800# CS Tr13CR 15NB
Design-spec API STD 602
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-back-seat SEPARATE
Pressure-designation-ASME-C 800
End-connection-s NPT/ASME B1.20.1
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ASTM A182 GRADE F 6A
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 34 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Type-of-gasket-bonnet SPWD SS304+ASB
Mat-packing-stem GRAFOIL W/INCONEL WIRE
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3308 REV.3
Size-NB 15MM
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00390 77.21.65.519.5 1,032 Piece
VLV GATE THD BB IBR 800# CS Tr13CR 20NB 28.02.2018
VLV GATE THD BB IBR 800# CS TR13CR 20NB
VLV GATE THD BB IBR 800# CS Tr13CR 20NB
Design-spec API STD 602
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-back-seat SEPARATE
Service IBR
Pressure-designation-ASME-C 800
End-connection-s NPT/ASME B1.20.1
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GR F6A/ASTM A479 GR410
Mat-trim ALLOY STEEL 13 CHROME
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-packing-stem GRAFOIL W/INCONEL WIRE
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Size-NB 20MM
BPCL SPECIFICATION SHEET:AE-S-3308 REV.3
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 35 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00400 77.21.65.520.5 724 Piece
VLV GATE THD BB 800# CS FRG Tr13CR 20NB 28.02.2018
VLV GATE THD BB 800# CS FRG TR13CR 20NB
Design-spec API STD 602
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-back-seat SEPARATE
Pressure-designation-ASME-C 800
End-connection-s ASME B1.20.1
End-connection-s NPT
Mat-body CARBON STEEL FORGED
Mat-trim ALLOY STEEL 13 CHROME
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-body ASTM A105 NORMALISED
Mat-spec-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-stem ASTM A479 GRADE 410
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Type-of-gasket-bonnet JACKETED
Type-of-gasket-bonnet SPIRAL WOUND
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spw-filler CAF
Mat-packing-stem GRAFOIL W/SUITABLE CORROSION I
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3308 REV.3
Size-NB 20
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 36 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00410 77.21.65.521.5 122 Piece
VLV GATE THD BB 800# CS Tr13CR 20NB 28.02.2018
VLV GATE THD BB 800# CS Tr13CR 20NB
Design-spec API STD 602
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-back-seat SEPARATE
Pressure-designation-ASME-C 800
End-connection-s SCRWD TO ANSI B2.1(FEMALE)
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Type-of-gasket-bonnet SPWD SS 304+ASB
Mat-packing-stem CRANE 1066 OR EQUAL
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts EIL SPEC.SHEET NO:51024
Size-NB 20
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 37 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00420 77.21.65.525.5 560 Piece
VLV GATE THD BB IBR 800# CS Tr13CR 25NB 28.02.2018
VLV GATE THD BB IBR 800# CS TR13CR 25NB
VLV GATE THD BB IBR 800# CS Tr13CR 25NB
Design-spec API STD 602
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-back-seat SEPARATE
Service IBR
Pressure-designation-ASME-C 800
End-connection-s NPT/ASME B1.20.1
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GR F6A/ASTM A479 GR410
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Type-of-gasket-bonnet SPWD SS304+ASB
Mat-packing-stem GRAFOIL W/INCONEL WIRE
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3308 REV.3
Size-NB 25
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00430 77.21.65.526.5 292 Piece
VLV GATE THD BB 800# CS Tr13CR 25NB 28.02.2018
VLV GATE THD BB 800# CS TR13CR 25NB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 38 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________"Valve,Gate,Wedge type,Bolted bonnet,Threaded"
Design-spec API STD 602
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-back-seat SEPARATE
Pressure-designation-ASME-C 800
End-connection-s ASME B1.20.1
End-connection-s NPT
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-body ASTM A105 NORMALISED
Mat-spec-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-stem ASTM A479 GRADE 410
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Type-of-gasket-bonnet JACKETED
Type-of-gasket-bonnet SPIRAL WOUND
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spw-filler CAF
Mat-packing-stem GRAFOIL W/SUITABLE CORROSION I
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3308 REV.3
Size-NB 25
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00440 77.21.65.531.5 2 Piece
VLV GATE THD BB 800# CS Tr13CR 40NB 28.02.2018
VLV GATE THD BB 800# CS TR13CR 40NB
Design-spec API STD 602
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 39 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-wedge SOLID
Type-of-stem RISING
Type-of-back-seat SEPARATE
Pressure-designation-ASME-C 800
End-connection-s ASME B1.20.1
End-connection-s NPT
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-body ASTM A105 NORMALISED
Mat-spec-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-stem ASTM A479 GRADE 410
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Type-of-gasket-bonnet JACKETED
Type-of-gasket-bonnet SPIRAL WOUND
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spw-filler CAF
Mat-packing-stem GRAFOIL W/SUITABLE CORROSION I
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3308 REV.3
Size-NB 40
SPECIFICATION SHEET:AE-S-3308 REV.3
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00450 77.21.67.513.5 720 Piece
VLV GATE SW HCP 800# CS Tr13CR 15NB 28.02.2018
VLV GATE SW HCP 800# CS TR13CR 15NB
Design-spec API STD 602
Design-spec-valve-trim IBR
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 40 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Service HYDROCARBON PRODUCTS
Temperature-range 136.2 KG/CM2G AT 28DEG.C
Temperature-range 92.7 KG/CM2G AT 400DEG.C
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-packing-stem GRAFOIL W/CORROSION INHIBITOR
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-stem ASTM A479 GRADE 410
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3308 REV.3
Size-NB 15
"IBR CERTIFICATION,"
SPECIFICATION SHEET:AE-S-3308 REV.3
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 41 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)______________________________________________________________________________________________________________________________________________00460 77.21.67.514.5 882 Piece
VLV GATE SW IBR 800# CS Tr13CR 15NB 28.02.2018
VLV GATE SW IBR 800# CS TR13CR 15NB
Design-spec API STD 602
Service IBR
Temperature-range 136.2 KG/CM2G AT 28DEG.C
Temperature-range 92.7 KG/CM2G AT 400DEG.C
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-packing-stem GRAFOIL W/CORROSION INHIBITOR
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-stem ASTM A479 GRADE 410
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3308 REV.3
Size-NB 15
"IBR CERTIFICATION,"
SPECIFICATION SHEET:AE-S-3308 REV.3
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 42 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00470 77.21.67.520.5 3,340 Piece
VLV GATE SW IBR 800# CS Tr13CR 20NB 28.02.2018
VLV GATE SW IBR 800# CS TR13CR 20NB
Design-spec API STD 602
Service IBR
Temperature-range 136.2 KG/CM2G AT 28DEG.C
Temperature-range 92.7 KG/CM2G AT 400DEG.C
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-packing-stem GRAFOIL W/CORROSION INHIBITOR
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-stem ASTM A479 GRADE 410
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3308 REV.3
Size-NB 20
"IBR CERTIFICATION,"
SPECIFICATION SHEET:AE-S-3308 REV.3
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 43 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00480 77.21.67.525.7 400 each
VLV GATE SW IBR 800# CS TR13CR 25NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Socket weld
Design-spec API 602
Service HP STEAM
Service STEAM
Pressure-designation-ASME-C 800
ENDS SW 3000 TO ANSI B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS304+ASB
Mat-packing-stem INCONEL-REINFOR. GRAGRAPH. ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ALLOY STEEL/13%CHROME
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A,STELLITED
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51022
Size-NB 25MM
TESTING AP1 598 /IBR
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 44 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00490 77.21.67.526.5 1,184 Piece
VLV GATE SW IBR 800# CS Tr13CR 25NB 28.02.2018
VLV GATE SW IBR 800# CS TR13CR 25NB
Design-spec API STD 602
Service IBR
Temperature-range 136.2 KG/CM2G AT 28DEG.C
Temperature-range 92.7 KG/CM2G AT 400DEG.C
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-packing-stem GRAFOIL W/CORROSION INHIBITOR
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-stem ASTM A479 GRADE 410
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3308 REV.3
Size-NB 25
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 45 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00500 77.21.67.532.5 480 Piece
VLV GATE SW IBR 800# CS Tr13CR 40NB 28.02.2018
VLV GATE SW IBR 800# CS TR13CR 40NB
"Valve,Gate,Wedge type,Bolted bonnet,Socket weld"
Design-spec API STD 602
Service IBR
Temperature-range 136.2 KG/CM2G AT 28DEG.C
Temperature-range 92.7 KG/CM2G AT 400DEG.C
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-packing-stem GRAFOIL W/CORROSION INHIBITOR
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-stem ASTM A479 GRADE 410
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3308 REV.3
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 46 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Size-NB 40
"IBR CERTIFICATION,"
SPECIFICATION SHEET:AE-S-3308 REV.3
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00510 77.21.67.533.7 150 each
VLV GATE SW 800# CS TR13CR 40NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Socket weld
Design-spec API 602
Temperature-range 186
Pressure-designation-ASME-C 800
Ends SW 3000PSI TO B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Mat-gasket-spw-filler SS316/CAF
Mat-packing-stem GRAPHITED ASBESTOS
Mat-spec-body-bonnet ASTM A 105(NO CASTING)
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ALLOY STEEL 13 CHROME
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51021
Size-NB 40MM
Unit Basic Rate (In Words) : ____________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 47 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00520 77.21.70.519.5 60 Piece
VLV GATE SW 800# CS Tr SS304/ST 20NB 28.02.2018
VLV GATE SW CAS 800# CS TrCS/ST 20NB
Design-spec API STD 602
Service CAUSTIC AND AMINE
Pressure-designation-ASME-C 800
Ends SW 3000 TO ANSI B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem AISI 304
Mat-trim AISI 304
Mat-spec-wedge-body-seats AISI 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51013
Size-NB 20MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 48 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00530 77.21.74.513.5 80 Piece
VLV GATE SW NA 800# CS TrCS/ST 15NB 28.02.2018
VLV GATE SW NA 800# CS TrCS/ST 15NB
Design-spec API STD 602
Service NACE MR-01-75
Pressure-designation-ASME-C 800
ENDS SW 3000 TO ANSI B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS316L+ASB
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem AISI 316 L
Mat-trim AISI 316 L
Mat-spec-wedge-body-seats AISI 316 L
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7M
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2HM
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51011
Size-NB 15MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 49 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00540 77.21.74.531.5 30 Piece
VLV GATE SW NA 800# CS TrCS/ST 40NB 28.02.2018
VLV GATE SW NA 800# CS TrCS/ST 40NB
Design-spec API STD 602
Service NACE MR-01-75
Pressure-designation-ASME-C 800
ENDS SW 3000 TO ANSI B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A105
Mat-spec-stem AISI 316 L
Mat-trim AISI 316 L
Mat-spec-wedge-body-seats AISI 316 L
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7M
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2HM
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51011
Size-NB 40MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 50 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________00550 77.22.61.526.7 2 each
VLV GATE SW 800# CS 25NB 28.02.2018
VLV GATE SW 800# CS 25NB
Design-spec API STD 602
Service NACE MR-01-75
Pressure-designation-ASME-C 800
ENDS SW 3000 TO ANSI B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A 350 GR LF2
Mat-spec-stem AISI 316 L
Mat-trim AISI 316 L
Mat-spec-wedge-body-seats AISI 316 L
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7M
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2HM
Size-NB 25MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00560 77.22.99.531.7 2 each
VLV GATE SW 800# CS 40NB 28.02.2018
VLV GATE SW 800# CS 40NB
Design-spec API STD 602
Service NACE MR-01-75
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 51 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Pressure-designation-ASME-C 800
ENDS SW 3000 TO ANSI B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A 352 GR LF2
Mat-spec-stem AISI 316 L
Mat-trim AISI 316 L
Mat-spec-wedge-body-seats AISI 316 L
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7M
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2HM
Size-NB 40MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00570 77.23.30.157.7 24 each
VLV GATE SW 150# SS TRSS304 40NB 28.02.2018
VALVES- GATE-WEDGE TYPE
BOLTED BONNET
Design spec : API 602
Design spec-end: SW 3000 TO B16.11
Temperature limit deg C: MAX TEMP 454 DEG.C
Pressure designation -ASME C : 800#
Type of wedge : SOLID
Type of stem : RISING
Type of bonnet : BOLTED
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 52 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________ Type of back seat : RENEWABLE
Type of gasket-bonnet : SPWD SS316+GRAFOIL FILLER
Mat-packing stem : GRAPHITED ASBESTOS WITH
SACRIFICIAL CORR. INHIB & INCONEL WIRE REINFORCEMENT
Hand Wheel: MALLEABLE IRON/CAST ST/FAB ST/DUCT. IRON
Mat-spec-body-bonnet : ASTM A182 GR.F304
Mat-spec-stem : SS 304 NO CASING
Mat-spec-wege-body-seats : STELLITED
Back Seat & Shoulder: INTEGRAL
Mat-spec-bolt-s : ASTM A193 GRADE B7
Mat-spec-nut-s : ASTM A194 GRADE 2H
Mandatory-add-reqrmts : EIL SPEC SHEET NO.51045
Size-NB : 40 MM
Hydrostatic Test Pressure:
BODY: 2900 PSIG SEAT: 80 PSIG
Test Pressure with AIR: 80 PSIG
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00580 77.24.27.519.5 16 Piece
VLV GATE SW 800# SS Tr316L/ST 20NB 28.02.2018
Design-spec API STD 602
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet STAINLESS STEEL 316L
Mat-trim STAINLESS STEEL 316L/STELLITED
Mat-stem STAINLESS STEEL 316L
Mat-body-seats STAINLESS STEEL 316L/STELLITED
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 53 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-wedge STAINLESS STEEL 316L/STELLITED
Mat-gasket-spw-filler GRAFOIL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A182 GRADE F 316L
Mat-spec-stem AISI 316 L
Mat-spec-wedge-body-seats ASTM A182 GRADE F 316L
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316L
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51066
Size-NB 20
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00590 77.24.28.513.7 16 each
VLV GATE SW 800# SS SS316 15NB 28.02.2018
VLV GATE SW 800# SS SS316 15NB
Valves,Gate,Wedge type, bolted bonnet,Socket weld
Design-spec API 602
Ends SW 3000 LBS ANSI B16.11
Temperature-range 550
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type of gasket, bonnet SP WND SS316+GRAFOIL FILLER
Mat-trim STAINLESS STEEL 316
Mat-gasket-spw-filler SP WND SS316+GRAFOIL FILLER
Mat-spec-body-bonnet ASTM A182 GRADE F 316
Mat-spec-stem AISI 316
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 54 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-wedge-body-seats AISI 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51061
Size-NB 15MM
STEM PACKING: CORROSION INHIBITED DIE FORMED
FLEXIBLE GRAPHITE WITH BRAIDED ANTI-EXTRUSION RING
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00600 77.24.28.519.7 22 each
VLV GATE SW 800# SS SS316 20NB 28.02.2018
VLV GATE SW 800# SS SS316 20NB
Valves,Gate,Wedge type, bolted bonnet,Socket weld
Design-spec API 602
Ends SW 3000 LBS ANSI B16.11
Temperature-range 550
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type of gasket, bonnet SP WND SS316+GRAFOIL FILLER
Mat-trim STAINLESS STEEL 316
Mat-gasket-spw-filler SP WND SS316+GRAFOIL FILLER
Mat-spec-body-bonnet ASTM A182 GRADE F 316
Mat-spec-stem AISI 316
Mat-spec-wedge-body-seats AISI 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51061
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 55 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Size-NB 20MM
STEM PACKING: CORROSION INHIBITED DIE FORMED
FLEXIBLE GRAPHITE WITH BRAIDED ANTI-EXTRUSION RING
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00610 77.24.35.521.5 50 Piece
VLV GATE SW -- 800# F5 Tr13CR 20NB 28.02.2018
VLV GATE SW -- 800# F5 TR13CR 20NB
VLV GATE SW -- 800# F5 Tr13CR 20NB
Pressure-designation-ASME-C 800
Ends SW 3000 LBS ANSI B16.11
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Mat-trim ALLOY STEEL 13 CHROME
Mat-spec-body-bonnet ASTM A182 GRADE F 5
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51036
Size-NB 20MM
LATEST REVISION AS ON 07.04.2012 : AES 3300 REV 3
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 56 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00620 77.24.35.525.5 36 Piece
VLV GATE SW -- 800# F5 Tr13CR 25NB 28.02.2018
VLV GATE SW -- 800# F5 TR13CR 25NB
Design-spec API STD 602
Service --
Temperature-range 137.9 KG/CM2G AT 28DEG.C
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet ALLOY STEEL 5.0CR-0.5MO
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-packing-stem METAL BRAIDED GRAPHITED ASBEST
Mat-spec-body-bonnet ASTM A182 GRADE F 5
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3300 REV.2
Size-NB 25
SPECIFICATION SHEET:TCS-3017 C (OR)
AE-S-3300 REV.2
LATEST REVISION AS ON 07.04.2012 : AES 3300 REV 3
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 57 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00630 77.24.35.526.7 50 each
VLV GATE SW/TH 800# F5 TR13CR 25NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Socket weld
Design-spec API 602
Ends SW 3000 LBS ANSI B16.11
Temperature-range 650
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Mat-trim ALLOY STEEL/13%CHROME
Mat-packing-stem GRAFOIL DIE MOULDED RING
Mat-spec-body-bonnet ASTM A182 GRADE F 5
Mat-spec-stem ASTM A182 GRADE 316H
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6,STELLITED
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B16
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 4
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51036
Size-NB 25MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 58 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)______________________________________________________________________________________________________________________________________________00640 77.24.39.513.7 30 each
VLV GATE TH 800# F5 TR13CR 15NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Threaded
Design-spec API STD 602
Type-of-wedge OUTSIDE SCREW AND YOKE
Type-of-stem RISING
Type-of-back-seat SEPARATE
Pressure-designation-ASME-C 800
End-connection-s ASME B1.20.1
End-connection-s NPT
Mat-body ASTM A182 F5
Mat-trim ALLOY STEEL 13% CHROME
Mat-spec-stem ASTM A182 GR F6A/A479 GR 410
Type-of-gasket-bonnet SPIRAL WOUND SS304/CAF
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Size-NB 15
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00650 77.24.41.513.5 22 Piece
VLV GATE SW 800# SS Tr304/ST 15NB 28.02.2018
Design-spec API STD 602
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 59 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body-bonnet STAINLESS STEEL 304
Mat-trim STAINLESS STEEL 304/STELLITED
Mat-stem STAINLESS STEEL 304
Mat-body-seats STAINLESS STEEL 304/STELLITED
Mat-wedge STAINLESS STEEL 304/STELLITED
Mat-gasket-spw-filler GRAFOIL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A182 GRADE F 304
Mat-spec-stem AISI 304
Mat-spec-wedge-body-seats ASTM A182 GRADE F 304
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51045
Size-NB 15
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00660 77.24.41.519.5 24 Piece
VLV GATE SW 800# SS Tr304/ST 20NB 28.02.2018
Design-spec API STD 602
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet STAINLESS STEEL 304
Mat-trim STAINLESS STEEL 304/STELLITED
Mat-stem STAINLESS STEEL 304
Mat-body-seats STAINLESS STEEL 304/STELLITED
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 60 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-wedge STAINLESS STEEL 304/STELLITED
Mat-gasket-spw-filler GRAFOIL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A182 GRADE F 304
Mat-spec-stem AISI 304
Mat-spec-wedge-body-seats ASTM A182 GRADE F 304
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51045
Size-NB 20
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00670 77.24.46.519.5 10 Piece
VLV GATE SW VAC 800# SS Tr321/ST 20NB 28.02.2018
Design-spec API STD 602
Service VACUUM
Pressure-designation-ASME-C 800
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet STAINLESS STEEL 321
Mat-trim STAINLESS STEEL 321/STELLITED
Mat-stem STAINLESS STEEL 321
Mat-body-seats STAINLESS STEEL 321/STELLITED
Mat-wedge STAINLESS STEEL 321/STELLITED
Mat-gasket-spw-filler CAF
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 61 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-body-bonnet ASTM A182 GRADE F 321
Mat-spec-stem AISI 321
Mat-spec-wedge-body-seats ASTM A182 GRADE F 321
Mat-spec-gasket-spw-windings ASTM A240 TYPE 321
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51093
Size-NB 20
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00680 77.24.62.519.7 120 each
VLV GATE TH 800# F11 TR13CR 20NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Threaded
Design-spec API STD 602
Type-of-wedge OUTSIDE SCREW AND YOKE
Type-of-stem RISING
Type-of-back-seat SEPARATE
Pressure-designation-ASME-C 800
End-connection-s ASME B1.20.1
End-connection-s NPT
Mat-body ASTM A182 F11
Mat-trim ALLOY STEEL 13% CHROME
Mat-spec-body ASTM A182 GRADE F 6A
Mat-spec-body ASTM A479 GRADE 410
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-stem ASTM A479 GRADE 410
Type-of-gasket-bonnet JACKETED
Type-of-gasket-bonnet SPIRAL WOUND
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spw-filler CAF
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 62 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Size-NB 20
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00690 77.24.97.513.5 16 Piece
VLV GATE THD BB 800# 316 Tr316 15NB 28.02.2018
VLV GATE THD BB 800# 316 TR316 15NB
Design-spec API STD 602
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bore FULL
Type-of-back-seat SEPARATE
Pressure-designation-ASME-C 800
End-connection-s NPT
Mat-body STAINLESS STEEL 316
Mat-trim STAINLESS STEEL 316
Mat-spec-body-bonnet ASTM A182 GRADE F 316
Mat-spec-body ASTM A182 GRADE F 316
Mat-spec-bonnet ASTM A182 GRADE F 316
Mat-spec-stem ASTM A182 GRADE F 316
Mat-spec-wedge-body-seats AISI 316
Type-of-gasket-bonnet SPIRAL WOUND
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spw-filler CAF
Mat-packing-stem TEFLON ASBESTOS
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3315 REV.2
Size-NB 15
BPCL PF NO:1034 10 OCT'96
Unit Basic Rate (In Words) : ____________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 63 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00700 77.31.01.507.7 10 each
VLV GLB TH 800# CS TR13CR 8NB 28.02.2018
Valves,Globe,Plug/ball type, bolted bonnet,Threaded
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Pressure-designation-ASME-C 800
End-connection-s NPT
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Size-NB 8
VALVE GLOBE FS BODY 800 LBS SCREWED END (NPT)
PLUG TYPE DISC AND SEAT BOLTED BONNET RISING
STEM 11-13% CHROME TRIM OS & Y SIZE 1/4 INCH
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 64 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________00710 77.31.01.514.7 80 each
VLV GLB TH 800# CS TR13CR 15NB 28.02.2018
Valves,Globe,Plug/ball type, bolted bonnet,Threaded
Design-spec OUTSIDE SCREW & YOKE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Pressure-designation-ASME-C 800
Fugitive-emission-tightness-cl NPT
End-connection-s NPT
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Size-NB 15
VALVE GLOBE FORGED STEEL BODY 800
LBS.SCREWED ENDS(NPT)
PLUG TYPE DISC AND SEAT BOLTED
BONNET OUTSIDE SCREW AND
YOKE RISING STEM 11-13%
CHROME TRIM SIZE 1/2 INCH
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00720 77.31.03.525.7 6 each
VLV GLB TH 800# CS TR13CR 25NB 28.02.2018
Valves,Globe,Plug/ball type, bolted bonnet,Threaded
Design-spec BS 5352
Type-of-stem RISING
Type-of-disc-s LOOSE PLUG TYPE
Type-of-bore STD
Type-of-bonnet BOLTED
Pressure-designation-ASME-C 800
End-connection-s NPT
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 65 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-spec-body-bonnet ASTM A105
Mat-spec-body ASTM A105
Mat-spec-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-gasket-spwnd-filler SS304/CAF
Mat-packing-stem GRAPHITED ASBESTOS
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Size-NB 25
HAND WHEEL:TYPE-RISING
MATERIAL:MALLEABLE IRON/CAST
STEEL/FAB.STEEL/DUCT.IRON
STEM PACKING:TYPE:RENEWABLE/NON-
RENEWABLE VALVE OPEN ON STREAM
MATERIAL:GRAPHITED ASBESTOS
WITH SACRIFICAL INHIBITOR &
INCONEL WIRE REINFORCEMENT
BODY SEAT RING:TYPE:RENEWABLE/NON-RENEWABLE
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00730 77.31.07.519.5 4 Piece
VLV GLB PT HCP 800# CS Tr13CR 20NB 28.02.2018
VLV GLB PT HCP 800# CS TR13CR 20NB
Design-spec BS 5352
Design-rating --
Design-spec-valve-trim --
Service HYDROCARBON PRODUCTS
Temperature-range 136.2 KG/CM2G AT 28 DEG.C
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 66 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Pressure-designation-ASME-C 800
Fugitive-emission-tightness-cl --
Fugitive-emission-endurance-cl --
Fugitive-emission-temp-class --
Type-of-pattern --
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-bore --
Type-of-stem RISING
Type-of-back-seat --
Type-of-gasket-bonnet JACKETED
Type-of-gasket-bonnet SPIRAL WOUND
Spec-treatm-body-seat-facing --
Spec-treatm-cont-area-disc --
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem-body-disc-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-packing-stem GRAFOIL W/CORROSION INHIBITOR
Mat-pkg-stem-intermd-rings --
Mat-pkg-stem-top-bott-rings --
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-body ASTM A105 NORMALISED
Mat-spec-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-gland-flange --
Mat-spec-gland-follower --
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3355 REV.4
Caps-code --
Identification-code --
Mass-kg --
Length-e-to-e-mm --
Size-DN 20
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 67 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00740 77.31.07.521.5 34 Piece
VLV GLB PT SW IBR 800# CS Tr13CR 20NB 28.02.2018
VLV GLB PT SW IBR 800# CS TR13CR 20NB
Design-spec BS 5352
Design-rating --
Design-spec-valve-trim --
Service IBR
Pressure-designation-ASME-C 800
Fugitive-emission-tightness-cl --
Fugitive-emission-endurance-cl --
Fugitive-emission-temp-class --
Type-of-pattern --
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-bore --
Type-of-stem RISING
Type-of-back-seat --
Type-of-gasket-bonnet JACKETED
Type-of-gasket-bonnet SPIRAL WOUND
Spec-treatm-body-seat-facing --
Spec-treatm-cont-area-disc --
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem-body-disc-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-packing-stem GRAFOIL W/CORROSION INHIBITOR
Mat-pkg-stem-intermd-rings --
Mat-pkg-stem-top-bott-rings --
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-body ASTM A105 NORMALISED
Mat-spec-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-gland-flange --
Mat-spec-gland-follower --
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 68 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3355 REV.4
Caps-code --
Identification-code --
Mass-kg --
Length-e-to-e-mm --
Size-DN 20
LOCATION: GAS TURBINE # 3.
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00750 77.31.07.523.7 80 each
VLV GLB SW 800# CS TR13CR 20NB 28.02.2018
Valves,Globe,Plug/ball type, bolted bonnet,Socket weld
Design-spec BS 5352
Design-rating ASME B16.11
Pressure-designation-ASME-C 800
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem-body-disc-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-packing-stem CRANE 1066 OR EQUAL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 69 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-body-bonnet ASTM A105
Mat-spec-body ASTM A105
Mat-spec-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52005
Size-DN 20
ENDS SW TO 6000# TO ANSI B 16.11,
TESTING TO BS 6755( PART 1)/BS6146
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00760 77.31.07.524.5 4 each
VLV GLB SW 800# CS TR13CR IBR 20NB 28.02.2018
Valves,Globe,Plug/ball type, bolted bonnet,Socket weld
Design-spec BS 5352
Design-rating ASME B16.11
Service IBR
Pressure-designation-ASME-C 800
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 70 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-stem-body-disc-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-packing-stem CRANE 1066 OR EQUAL
Mat-spec-body-bonnet ASTM A105
Mat-spec-body ASTM A105
Mat-spec-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52005
Size-DN 20
ENDS SW TO 6000# TO ANSI B 16.11,
TESTING TO BS 6755( PART 1)/BS6146
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00770 77.31.07.525.5 10 Piece
VLV GLB PT THD 800# CS Tr13CR 25NB 28.02.2018
VLV GLB PT THD 800# CS TR13CR 25NB
Design-spec BS 5352
Type-of-stem RISING
Type-of-disc-s PLUG
Type-of-bore --
Type-of-bonnet BOLTED
Type-of-pattern --
Type-of-back-seat --
Pressure-designation-ASME-C 800
Fugitive-emission-tightness-cl --
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 71 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Fugitive-emission-endurance-cl --
Fugitive-emission-temp-class --
End-connection-s NPT FEMALE
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-body ASTM A105 NORMALISED
Mat-spec-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-gland-follower --
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Type-of-gasket-bonnet JACKETED
Type-of-gasket-bonnet SPIRAL WOUND
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spwnd-filler CAF
Mat-packing-stem GRAPHOIL W/ SUITABLE CORROSION
Mat-pkg-stem-intermd-rings --
Mat-pkg-stem-top-bott-rings --
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3355 REV.4
Caps-code --
Identification-code --
Mass-kg --
Size-NB 25
BPCL BOM 883 12 OCT'95
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00780 77.31.07.526.5 22 Piece
VLV GLB PT HCP 800# CS Tr13CR 25NB 28.02.2018
VLV GLB PT HCP 800# CS TR13CR 25NB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 72 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Design-spec BS 5352
Design-rating --
Design-spec-valve-trim --
Service HYDROCARBON PRODUCTS
Temperature-range 136.2 KG/CM2G AT 28 DEG.C
Pressure-designation-ASME-C 800
Fugitive-emission-tightness-cl --
Fugitive-emission-endurance-cl --
Fugitive-emission-temp-class --
Type-of-pattern --
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-bore --
Type-of-stem RISING
Type-of-back-seat --
Type-of-gasket-bonnet JACKETED
Type-of-gasket-bonnet SPIRAL WOUND
Spec-treatm-body-seat-facing --
Spec-treatm-cont-area-disc --
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem-body-disc-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-packing-stem GRAFOIL W/CORROSION INHIBITOR
Mat-pkg-stem-intermd-rings --
Mat-pkg-stem-top-bott-rings --
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-body ASTM A105 NORMALISED
Mat-spec-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-gland-flange --
Mat-spec-gland-follower --
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3355 REV.4
Caps-code --
Identification-code --
Mass-kg --
Length-e-to-e-mm --
Size-DN 25
Unit Basic Rate (In Words) : ____________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 73 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00790 77.31.07.530.7 20 each
VLV GLB SW 800# CS TR13CR 25NB 28.02.2018
Valves,Globe,Plug/ball type, bolted bonnet,Socket weld
Design-spec BS 5352
Design-rating ASME B16.11
Pressure-designation-ASME-C 800
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem-body-disc-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-packing-stem CRANE 1066 OR EQUAL
Mat-spec-body-bonnet ASTM A105
Mat-spec-body ASTM A105
Mat-spec-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52005
Size-DN 25
ENDS SW TO 6000# TO ANSI B 16.11,
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 74 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________TESTING TO BS 6755( PART 1)/BS6146
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00800 77.31.09.513.5 44 Piece
VLV GLB PT SW IBR 800# CS TrCS/ST 15NB 28.02.2018
Design-spec BS 5352
Service IBR
Pressure-designation-ASME-C 800
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-gasket-spwnd-filler CAF
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A105
Mat-spec-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52002
Size-DN 15
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 75 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00810 77.31.09.514.5 66 Piece
VLV GLB PT SW IBR 800# CS 13CR/ST 15NB 28.02.2018
Design-spec BS 5352
Service IBR
Pressure-designation-ASME-C 800
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13CHROME/STELLITED
Mat-gasket-spwnd-filler CAF
Mat-packing-stem CRANE 1066 OR EQUAL
Mat-spec-body ASTM A105
Mat-spec-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52022
Size-DN 15
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 76 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00820 77.31.09.515.5 136 Piece
VLV GLB PT SW 800# CS TrCS/ST 15NB 28.02.2018
VLV GLB PT SW 800# CS TrCS/ST 15NB
Design-spec BS 5352
Pressure-designation-ASME-C 800
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-gasket-spwnd-filler CAF
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A105
Mat-spec-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52001
Size-DN 15
SW TO 3000 LBS
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 77 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00830 77.31.09.515.5 18 Piece
VLV GLB PT SW 800# CS TrCS/ST 15NB 28.02.2018
VLV GLB PT SW 800# CS TrCS/ST 15NB
Design-spec BS 5352
Pressure-designation-ASME-C 800
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-gasket-spwnd-filler CAF
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A105
Mat-spec-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52001
Size-DN 15
SW TO 3000 LBS
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 78 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Other charges (if any ) : Please specify separately
_______________________________________________________________________00840 77.31.09.519.5 112 Piece
VLV GLB PT SW IBR 800# CS TrCS/ST 20NB 28.02.2018
Design-spec BS 5352
Service IBR
Pressure-designation-ASME-C 800
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-gasket-spwnd-filler CAF
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A105
Mat-spec-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52002
Size-DN 20
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 79 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________00850 77.31.09.521.5 42 Piece
VLV GLB PT SW 800# CS TrCS/ST 20NB 28.02.2018
Design-spec BS 5352
Pressure-designation-ASME-C 800
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-gasket-spwnd-filler CAF
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A105
Mat-spec-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A105
Mat-spec-body-seat-s ASTM A105
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52001
Size-DN 20
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00860 77.31.09.526.5 44 Piece
VLV GLB PT SW IBR 800# CS EIL 52022 25NB 28.02.2018
Design-spec BS 5352
Service IBR
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 80 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Pressure-designation-ASME-C 800
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13CHROME/STELLITED
Mat-gasket-spwnd-filler CAF
Mat-packing-stem CRANE 1066 OR EQUAL
Mat-spec-body ASTM A105
Mat-spec-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52022
Size-DN 25
ENDS : SW 3000 TO ANSI B16.11
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00870 77.31.61.525.7 20 each
VLV GLB SW H2 800# CS TR13CR 25NB 28.02.2018
VLV GLB SW H2 800# CS TR13CR 25NB
Valves Globe bolted bonnet Socket weld
Design-spec BS 5352
Service HYDROGEN
Pressure-designation-ASME-C 800
Type-of-disc-s PLUG
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 81 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim ALLOY STEEL/13%CHROME
Mat-stem-body-disc-seats ALLOY STEEL/13%CHROME/STELLITE
Mat-gasket-spwnd-filler CAF
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A105
Mat-spec-bonnet ASTM A105
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52004
Size-DN 25
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00880 77.31.97.531.5 46 Piece
VLV GLB PT SW HCP 800# CS TrCS/ST 40NB 28.02.2018
VLV GLB PT SW HCP 800# CS TrCS/ST 40NB
Design-spec BS 5352
Service HYDROCARBON PRODUCTS
Pressure-designation-ASME-C 800
Type-of-bonnet BOLTED
Type-of-stem OUTSIDE SCREW & YOKE
Mat-body-bonnet CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 82 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-trim CARBON STEEL/STELLITED
Mat-spec-body-bonnet ASTM A105
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52001
Size-NB 40
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00890 77.34.06.525.5 2 each
VLV GLB PT SW 800# Tr.SS316/ST 25NB 28.02.2018
Name VALVE GLOBE
Design-spec BS 5352
Temperature-range 371 DEG.C (MAX)
Pressure-designation-ASME-C 800
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
"Type-of-stem OUTSIDE SCREW & YOKE, RISING"
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet STAINLESS STEEL 316
Mat-trim STAINLESS STEEL 316/STELLITED
Mat-gasket-spwnd-filler GRAFOIL
Mat-packing-stem GRAPHITE WITH ANTI EXTRUSION R
Mat-spec-bonnet ASTM A182 GRADE F316
Mat-spec-stem SS316
Mat-spec-disc-s STELLITED
Mat-spec-body-seat-s STELLITED
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mandatory-add-reqrmts EIL SPEC.SHEET No.52061
Size-DN 25
Mat-spec-nuts: ASTM A194 GR.2H
Mat-stem packing: CORROSION INHIBITED DIE
FORMED FLEXIBLE GRAPHITE WITH BRAIDED ANTI-
EXTRUSION RINGS.
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 83 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00900 77.10.00.276.7 4 each
VLV CHK FLG 300# WC6 TR13CR 80NB 28.02.2018
Valves,Check,Swing type, bolted cover,Flanged
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300 LBS
Type-of-cover BOLTED
Mat-body-cover ALLOY STEEL ASTM A 217 GR WC6
Mat-body ALLOY STEEL WC6
Mat-cover ALLOY STEEL/13%CHROME
Mat-trim ASTM A 217 GR WC6
Mat-body-seats 13%CR+STELLITED
Mat-disc-hinge 13%CR+STELLITED
Mat-spec-body-cover ASTM A217 GRADE WC6
Mat-spec-body ASTM A217 GRADE WC6
Mat-spec-cover ASTM A217 GRADE WC6
Mat-spec-disc-s ASTM A217 GRADE WC6
Mat-spec-body-seat-s ASTM A217 GRADE WC6
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53430
Size-NB 80
DESIGN SPEC BS 1868,
TESTING BS 6755 PART-1
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 84 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00910 77.10.15.151.5 8 Piece
VLV CHK FLG CAS 150# CS Tr304 50NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Service CAUSTIC AND AMINE
Pressure-designation-ASME-C 150
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-cover CARBON STEEL
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim STAINLESS STEEL 304
Mat-body-seats STAINLESS STEEL 304
Mat-disc-hinge STAINLESS STEEL 304
Mat-hinge-pin STAINLESS STEEL 304
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s AISI 304
Mat-spec-body-seat-s AISI 304
Mat-spec-hinge-pin AISI 304
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53313
Size-NB 50
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 85 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00920 77.10.20.151.5 40 Piece
VLV CHK FLG 150# CS NRV Tr13CR 50NB 28.02.2018
VLV CHK FLG 150# CS NRV TR13CR 50NB
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Service --
Pressure-designation-ASME-C 150
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-cover CARBON STEEL
Mat-body CARBON STEEL NRV
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings CAF
Mat-spec-gsk-spw-cent-ring ASTM A240 TYPE 304
Mat-spec-gsk-spw-inn-ring ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s ASTM A307 GRADE B
Mat-spec-bolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3374 REV.3
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 86 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Size-NB 50
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00930 77.10.20.154.5 52 Piece
VLV CHK FLG 150# CS Tr13CR EIL53301 50NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53301
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 87 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Size-NB 50
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00940 77.10.20.155.5 32 Piece
VLV CHK FLG 150# CS Tr13CR EIL53321 50NB 28.02.2018
VLV CHK FLG 150# CS Tr13CR 50NB
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 150
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53321
Size-NB 50
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 88 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00950 77.10.20.157.5 54 Piece
VLV CHK FLG -- 150# CS Tr13CR 80NB 28.02.2018
VLV CHK FLG -- 150# CS TR13CR 80NB
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Service --
Pressure-designation-ASME-C 150
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-cover CARBON STEEL
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings CAF
Mat-spec-gsk-spw-cent-ring ASTM A240 TYPE 304
Mat-spec-gsk-spw-inn-ring ASTM A240 TYPE 304
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 89 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s ASTM A307 GRADE B
Mat-spec-bolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3374 REV.3
Size-NB 80
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00960 77.10.20.160.5 12 Piece
*DNR*VLV CHK FLG 150# CS Tr13CR 80NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 90 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53301
Size-NB 80
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00970 77.10.20.161.5 54 Piece
VLV CHK FLG 150# CS NRV Tr13CR 100NB 28.02.2018
VLV CHK FLG 150# CS NRV TR13CR 100NB
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Service --
Pressure-designation-ASME-C 150
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-cover CARBON STEEL
Mat-body CARBON STEEL NRV
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 91 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings CAF
Mat-spec-gsk-spw-cent-ring ASTM A240 TYPE 304
Mat-spec-gsk-spw-inn-ring ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s ASTM A307 GRADE B
Mat-spec-bolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3374 REV.3
Size-NB 100
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00980 77.10.20.162.5 62 Piece
VLV CHK FLG 150# CS Tr13CR 100NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 92 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53301
Size-NB 100
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________00990 77.10.20.166.5 30 Piece
VLV CHK FLG 150# CS NRV Tr13CR 150NB 28.02.2018
VLV CHK FLG 150# CS NRV TR13CR 150NB
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 150
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-cover CARBON STEEL
Mat-body CARBON STEEL NRV
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 93 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings CAF
Mat-spec-gsk-spw-cent-ring ASTM A240 TYPE 304
Mat-spec-gsk-spw-inn-ring ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s ASTM A307 GRADE B
Mat-spec-bolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3374 REV.3
Size-NB 150
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01000 77.10.20.167.5 16 Piece
VLV CHK FLG 150# CS Tr13CR 150NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 94 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53301
Size-NB 150
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01010 77.10.20.171.5 16 Piece
VLV CHK FLG 150# CS NRV Tr13CR 200NB 28.02.2018
VLV CHK FLG 150# CS NRV TR13CR 200NB
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Service --
Pressure-designation-ASME-C 150
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 95 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-cover CARBON STEEL
Mat-body CARBON STEEL NRV
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings CAF
Mat-spec-gsk-spw-cent-ring ASTM A240 TYPE 304
Mat-spec-gsk-spw-inn-ring ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s ASTM A307 GRADE B
Mat-spec-bolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3374 REV.3
Size-NB 200
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 96 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)______________________________________________________________________________________________________________________________________________01020 77.10.20.173.5 26 Piece
VLV CHK FLG 150# CS Tr13CR 200NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53301
Size-NB 200
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 97 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________01030 77.10.20.178.5 16 Piece
VLV CHK FLG 150# CS Tr13CR 250NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53301
Size-NB 250
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 98 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________01040 77.10.20.185.7 10 each
VLV CHK FLG 150# CS TR13CR 300NB 28.02.2018
Valves,Check,Swing type, bolted cover,Flanged
Design-spec ASME B16.34
Design-spec BS 1868
Design-spec-end-flanges ASME B16.5
Pressure-designation-ASME-C 150 LBS
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-cover CS A216 GR WCB
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL/13%CHROME
Mat-body-seats ALLOY STEEL/13%CHROME
Mat-disc-hinge ALLOY STEEL/13%CHROME
Mat-hinge-pin ALLOY STEEL/13%CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s AISI 316 L
Mat-spec-body-seat-s AISI 316 L
Mat-spec-hinge-pin AISI 316 L
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316L
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53311
Size-NB 300
DESIGN SPEC-BS1868
TESTING BS 6755 (PART1)/API 598.
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 99 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01050 77.10.20.240.7 2 each
VLV CHK FLG 150# CS -- 125NB 28.02.2018
Valves,Check,Swing type, bolted cover,Flanged
Design-spec BS 1868
Design-spec-end-flanges ASME B16.5
Service 150
Temperature-limit-deg-C 400
Pressure-designation-ASME-C 150
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Finish-flange-facing SERRATED
Spec-treatm-body-seat-facing -
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL/13%CHROME
Mat-body-seats ALLOY STEEL/13%CHROME
Mat-disc-hinge CS/ALLOY STEEL/13%CHROME
Mat-hinge-pin --
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53301(1/2)
Size-NB 125
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 100 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01060 77.10.20.271.5 56 Piece
VLV CHK FLG 300# CS NRV Tr13CR 50NB 28.02.2018
VLV CHK FLG 300# CS NRV TR13CR 50NB
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Service --
Pressure-designation-ASME-C 300
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-cover CARBON STEEL
Mat-body CARBON STEEL NRV
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings CAF
Mat-spec-gsk-spw-cent-ring ASTM A240 TYPE 304
Mat-spec-gsk-spw-inn-ring ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s ASTM A307 GRADE B
Mat-spec-bolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3375 REV.3
Size-NB 50
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 101 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01070 77.10.20.274.5 56 Piece
VLV CHK FLG 300# CS Tr13CR 50NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53401
Size-NB 50
Unit Basic Rate (In Words) : ____________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 102 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01080 77.10.20.276.5 4 Piece
VLV CHK FLG 300# CS NRV Tr13CR 80NB 28.02.2018
VLV CHK FLG 300# CS NRV TR13CR 80NB
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Service --
Pressure-designation-ASME-C 300
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-cover CARBON STEEL
Mat-body CARBON STEEL NRV
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings CAF
Mat-spec-gsk-spw-cent-ring ASTM A240 TYPE 304
Mat-spec-gsk-spw-inn-ring ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 103 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s ASTM A307 GRADE B
Mat-spec-bolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3375 REV.3
Size-NB 80
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01090 77.10.20.280.5 46 Piece
VLV CHK FLG 300# CS Tr13CR 80NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 104 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53401
Size-NB 80
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01100 77.10.20.281.5 10 Piece
VLV CHK FLG 300# CS NRV Tr13CR 100NB 28.02.2018
VLV CHK FLG 300# CS NRV TR13CR 100NB
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Service --
Pressure-designation-ASME-C 300
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-cover CARBON STEEL
Mat-body CARBON STEEL NRV
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 105 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings CAF
Mat-spec-gsk-spw-cent-ring ASTM A240 TYPE 304
Mat-spec-gsk-spw-inn-ring ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s ASTM A307 GRADE B
Mat-spec-bolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3375 REV.3
Size-NB 100
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01110 77.10.20.282.5 22 Piece
VLV CHK FLG 300# CS Tr13CR 100NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 106 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53401
Size-NB 100
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01120 77.10.20.287.5 10 Piece
VLV CHK FLG -- 300# CS Tr13CR 150NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Service --
Pressure-designation-ASME-C 300
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-cover CARBON STEEL
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 107 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings CAF
Mat-spec-gsk-spw-cent-ring ASTM A240 TYPE 304
Mat-spec-gsk-spw-inn-ring ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-bolt-s ASTM A307 GRADE B
Mat-spec-bolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3375 REV.2
Size-NB 150
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01130 77.10.20.290.5 8 Piece
VLV CHK FLG 300# CS Tr13CR 150NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 108 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53401
Size-NB 150
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01140 77.10.20.292.5 10 Piece
VLV CHK FLG IBR 300# CS Tr13CR 200NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Service IBR
Pressure-designation-ASME-C 300
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 109 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53402
Size-NB 200
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01150 77.10.20.299.5 8 Piece
VLV CHK FLG IBR 300# CS Tr13CR 100NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Service IBR
Pressure-designation-ASME-C 300
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-cover CARBON STEEL
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 110 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body-cover ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53402
Size-NB 100
LOCATION : FCCU COMPLEX
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01160 77.10.20.300.5 4 Piece
VLV CHK FLG 300# CS Tr13CR 250NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-cover CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 111 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-disc-hinge CS/ALLOY STEEL 13 CHROME
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-cover ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A216 GRADE WCB
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53401
Size-NB 250
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01170 77.11.01.511.7 20 each
VLV CHK TH 800# CS TR13CR 50NB 28.02.2018
Valves,Check,Piston type, bolted cover,Threaded
Type-of-cover BOLTED
Type-of-bore REDUCED
End-connection-s NPT
Pressure-designation-ASME-C 800
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROMIUM
Mat-spec-body-cover ASTM A105
Size-NB 50
HORIZONTAL LIFT,RENEWABLE SEAT
Unit Basic Rate (In Words) : ____________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 112 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01180 77.13.51.287.5 8 Piece
VLV CHK FLG 300# 5CR TR13CR 50NB 28.02.2018
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-bore FULL
Type-of-cover BOLTED
Facing-flange RAISED FACE
Mat-body-cover ALLOY STEEL
Mat-body ALLOY STEEL
Mat-trim 13% CHROMIUM ALLOY
Mat-piston CS/13% CHROMIUM ALLOY
Mat-spec-body-cover ASTM A217 GRADE C5
Mat-spec-body ASTM A217 GRADE C5
Mat-spec-piston ASTM A182 GRADE F 6
Mat-spec-piston ASTM A217 GRADE C5
Mat-spec-body-seat-s ASTM A182 GRADE F 6
Mat-spec-body-seat-s ASTM A217 GRADE C5
Size-NB 50
LOCATION : FCCU COMPLEX
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 113 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Other charges (if any ) : Please specify separately
_______________________________________________________________________01190 77.13.51.293.5 4 Piece
VLV CHK FLG 300# 5CR TR13CR 80NB 28.02.2018
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-bore FULL
Type-of-cover BOLTED
Facing-flange RAISED FACE
Mat-body-cover ALLOY STEEL
Mat-body ALLOY STEEL
Mat-trim 13% CHROMIUM ALLOY
Mat-piston CS/13% CHROMIUM ALLOY
Mat-spec-body-cover ASTM A217 GRADE C5
Mat-spec-body ASTM A217 GRADE C5
Mat-spec-piston ASTM A182 GRADE F 6
Mat-spec-piston ASTM A217 GRADE C5
Mat-spec-body-seat-s ASTM A182 GRADE F 6
Mat-spec-body-seat-s ASTM A217 GRADE C5
Size-NB 80
LOCATION : FCCU COMPLEX
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01200 77.13.51.311.5 4 Piece
VLV CHK FLG 300# 5CR TR13CR 200NB 28.02.2018
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-bore FULL
Type-of-cover BOLTED
Facing-flange RAISED FACE
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 114 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body-cover ALLOY STEEL
Mat-body ALLOY STEEL
Mat-trim 13% CHROMIUM ALLOY
Mat-piston CS/13% CHROMIUM ALLOY
Mat-spec-body-cover ASTM A217 GRADE C5
Mat-spec-body ASTM A217 GRADE C5
Mat-spec-piston ASTM A182 GRADE F 6
Mat-spec-piston ASTM A217 GRADE C5
Mat-spec-body-seat-s ASTM A182 GRADE F 6
Mat-spec-body-seat-s ASTM A217 GRADE C5
Size-NB 200
LOCATION : FCCU COMPLEX
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01210 77.13.52.276.5 4 Piece
VLV CHK FLG 300# 5CR TRAS/ST 80NB 28.02.2018
Design-spec BS 1868
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-cover BOLTED
Type-of-gasket-cover SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-cover ALLOY STEEL
Mat-body ALLOY STEEL
Mat-cover ALLOY STEEL
Mat-trim ALLOY STEEL/STELLITED
Mat-body-seats ALLOY STEEL/STELLITED
Mat-disc-hinge ALLOY STEEL/STELLITED
Mat-hinge-pin ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler GRAFOIL
Mat-spec-body-cover ASTM A217 GRADE C5
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 115 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-body ASTM A217 GRADE C5
Mat-spec-cover ASTM A217 GRADE C5
Mat-spec-disc-s ASTM A217 GRADE C5
Mat-spec-body-seat-s ASTM A217 GRADE C5
Mat-spec-hinge-pin ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B16
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 4
Mat-spec-bolt-s ASTM A193 GRADE B16
Mat-spec-nut-s ASTM A194 GRADE 4
Mandatory-add-reqrmts EIL SPEC.SHEET NO:53436
Size-NB 80
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01220 77.20.61.412.5 22 Piece
VLV GATE FL 600# CS TrCS/ST 50NB 28.02.2018
VLV GATE FL 600# CS TrCS/ST 50NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 600
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-body-bonnet CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 116 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings SS 316 W/ASB FILL
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51501
Size-NB 50MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01230 77.20.61.416.5 12 Piece
VLV GATE FLG IBR 600# CS 13CR/ST 50NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service IBR
Pressure-designation-ASME-C 600
Type-of-wedge SOLID
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 117 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-trim ALLOY STEEL 13 CHROME
Mat-trim CARBON STEEL/STELLITED
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL/STELLITED
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem GRAFOIL
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3303 REV.2
Size-NB 50
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01240 77.20.61.420.5 2 Piece
VLV GATE FL 600# CS TrCS/ST 80NB 28.02.2018
VLV GATE FL 600# CS TrCS/ST 80NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 600
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 118 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS 316/ASB FILL
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-trim CARBON STEEL/STELLITED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51501
Size-NB 80MM
ADD INFO:WEDGE/BODY SEATS STELLITED
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01250 77.20.61.424.5 4 Piece
VLV GATE FL 600# CS TrCS/ST 100NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 600
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 119 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51501
Size-NB 100
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 120 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________01260 77.20.61.430.5 4 Piece
VLV GATE FL 600# CS TrCS/ST 150NB 28.02.2018
VLV GATE FL 600# CS TrCS/ST 150NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 600
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316-GRAFOIL FILLER
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-trim CARBON STEEL/STELLITED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-packing-stem INCONEL BRAIDED GRAPHITE
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51501
Size-NB 150MM
ADD INFO:WEDGE/BODY SEATS STELLITED
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01270 77.20.61.431.5 4 Piece
VLV GATE FL IBR 600# CS TrCS/ST 150NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service IBR
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 121 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Pressure-designation-ASME-C 600
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51502
Size-NB 150
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 122 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Other charges (if any ) : Please specify separately
_______________________________________________________________________01280 77.20.62.162.5 26 Piece
VLV GATE FL 150# CS Tr13CR IBR 50NB 28.02.2018
VLV GATE FL 150# CS Tr13CR IBR 50NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125AARH
Service IBR
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/CAF FILL
Mat-trim ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51321
Size-NB 50MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 123 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________01290 77.20.62.163.5 590 Piece
VLV GATE FL -- 150# CS Tr13CR 50NB 28.02.2018
VLV GATE FL -- 150# CS TR13CR 50NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 38 DEG.C
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 50
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 124 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01300 77.20.62.163.7 2 each
VLV GATE FL 150# CS TR13CR EIL 51394 50N 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Flanged
Design-spec API 600
Pressure-designation-ASME-C 150
Type-of-wedge SOLID/FLEXIBLE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Mat-gasket-spw-filler SS304/CAF
Mat-packing-stem GRAPHITED ASBESTOS
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A307 GRADE B7
Mat-spec-nut-s ASTM A563 GRADE B
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51394
Size-NB 50MM
SPECIAL SERVICE CONDITION:INSTRUMENT AIR,CATEGORY'D'
TEST PRESSURE WITH AIR:80 PSI,TEST STANDARD:API 598
HYDROSTATIC TEST PRESSURE:450 PSI
Unit Basic Rate (In Words) : ____________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 125 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01310 77.20.62.166.5 152 Piece
VLV GATE FL 150# CS Tr13CR 50NB 28.02.2018
VLV GATE FL 150# CS Tr13CR 50NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/ASB FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51321
Size-NB 50MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 126 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01320 77.20.62.167.7 56 each
VLV GATE FL 150# CS TR13CR EIL 51301 50N 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Flanged
Design-spec API 600
Design-spec-end-flanges ASME B16.5 RF 125 AARH
Temperature-limit-deg-C 400
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-wedge SOLID/FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/ASB FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ASTM A216 GRADE WCB
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51301
Size-NB 50MM
TEST PRESSURE WITH AIR:80 PSI,HYDROSTATIC TEST PRESSURE:450 PSI TEST PRESSURE
WITH AIR:80 PSI
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 127 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01330 77.20.62.169.5 354 Piece
VLV GATE FL -- 150# CS Tr13CR 80NB 28.02.2018
VLV GATE FL -- 150# CS TR13CR 80NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 38 DEG.C
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 128 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 80
LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01340 77.20.62.170.5 2 Piece
VLV GATE FL IBR 150# CS Tr13CR 80NB 28.02.2018
VLV GATE FL IBR 150# CS TR13CR 80NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service IBR
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 129 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 80
LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01350 77.20.62.172.5 1,222 Piece
VLV GATE FL 150# CS Tr13CR 80NB 28.02.2018
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 130 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________VLV GATE FL 150# CS Tr13CR 80NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125AARH
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/CAF FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51301
Size-NB 80MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01360 77.20.62.173.5 24 Piece
VLV GATE FL IBR 150# CS Tr13CR 80NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service IBR
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 131 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51302
Size-NB 80
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 132 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01370 77.20.62.175.7 400 each
VLV GATE FL 150# CS TR13CR 100NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Flanged
Design-spec API 600
Design-spec-end-flanges ASME B16.5 RF 125 AARH
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/CAF FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51311
Size-NB 100MM
TEST PRESSURE WITH AIR:80 PSI
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 133 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)______________________________________________________________________________________________________________________________________________01380 77.20.62.176.5 452 Piece
VLV GATE FL -- 150# CS Tr13CR 100NB 28.02.2018
VLV GATE FL -- 150# CS TR13CR 100NB
"Valve,Gate,Wedge type,Bolted bonnet,Flanged"
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 38 DEG.C
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-nut-s ASTM A194 GRADE 2H
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 134 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 100
LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01390 77.20.62.177.5 164 Piece
VLV GATE FL 300# CS Tr13CR 100NB 28.02.2018
VLV GATE FL 300# CS TR13CR 100NB
VLV GATE FL 300# CS Tr13CR 100NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF SERR
Temperature-limit-deg-C 20 KG/CM2 AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS304/ASB FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3310 REV.4
Size-NB 100MM
LATEST REVISION AS ON 07.04.2012 : AES 3310 REV 5
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 135 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01400 77.20.62.178.5 320 Piece
VLV GATE FL 150# CS Tr13CR 100NB 28.02.2018
VLV GATE FL 150# CS Tr13CR 100NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS 316/ASB FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51301
Size-NB 100MM
LOCK OPEN
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 136 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01410 77.20.62.182.5 400 Piece
VLV GATE FL -- 150# CS Tr13CR 150NB 28.02.2018
VLV GATE FL -- 150# CS TR13CR 150NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 38 DEG.C
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 137 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 150
LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01420 77.20.62.183.5 170 Piece
VLV GATE FL 150# CS Tr13CR 150NB 28.02.2018
VLV GATE FL 150# CS Tr13CR 150NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125AARH
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS 316/ASB FILL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 138 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-trim ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51301
Size-NB 150MM
LOCK OPEN
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01430 77.20.62.188.5 200 Piece
VLV GATE FL -- 150# CS Tr13CR 200NB 28.02.2018
VLV GATE FL -- 150# CS TR13CR 200NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 38 DEG.C
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 139 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 200
LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01440 77.20.62.189.5 62 Piece
VLV GATE FL 150# CS Tr13CR 200NB 28.02.2018
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 140 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________VLV GATE FL 150# CS Tr13CR 200NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51301
Size-NB 200MM
LOCK CLOSED
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01450 77.20.62.193.5 80 Piece
VLV GATE FL -- 150# CS Tr13CR 250NB 28.02.2018
VLV GATE FL -- 150# CS TR13CR 250NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 141 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Temperature-limit-deg-C 20 KG/CM2 AT 38 DEG.C
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 250
GEAR OPERATED
LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 142 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01460 77.20.62.197.5 8 Piece
VLV GATE FL IBR 150# CS Tr13CR 250NB 28.02.2018
VLV GATE FL IBR 150# CS TR13CR 250NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service IBR
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 143 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-gasket-spw-windings AISI 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 250
NOTE: THE ABOVE DESCRIPTION HAS BEEN CHANGED FROM
GATE VALVE 10 INCH RF 150# SHT 51302. IBR.
AS PER NOTE FROM MR. J.D.CHHOWALA DATED 19.10.2001.
LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01470 77.20.62.198.5 36 Piece
VLV GATE FL 150# CS Tr13CR 250NB 28.02.2018
VLV GATE FL 150# CS Tr13CR 250NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 144 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51301
Size-NB 250MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01480 77.20.62.199.5 74 Piece
VLV GATE FL -- 150# CS Tr13CR 300NB 28.02.2018
VLV GATE FL -- 150# CS TR13CR 300NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 38 DEG.C
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 145 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 300
LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01490 77.20.62.202.5 42 Piece
VLV GATE FL 150# CS Tr13CR 300NB 28.02.2018
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 146 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________VLV GATE FL 150# CS Tr13CR 300NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/CAF FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51301
Size-NB 300MM
LOCK OPEN
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01500 77.20.62.205.5 36 Piece
VLV GATE FL -- 150# CS Tr13CR 350NB 28.02.2018
VLV GATE FL -- 150# CS TR13CR 350NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 147 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Temperature-limit-deg-C 20 KG/CM2 AT 38 DEG.C
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 350
LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 148 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01510 77.20.62.207.5 100 Piece
VLV GATE FL 150# CS Tr13CR 350NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 149 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51301
Size-NB 350
LOCK CLOSED & GEAR OPERATED
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01520 77.20.62.211.5 36 Piece
VLV GATE FL -- 150# CS Tr13CR 400NB 28.02.2018
VLV GATE FL -- 150# CS TR13CR 400NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 38 DEG.C
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 150 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 400
LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01530 77.20.62.214.5 32 Piece
VLV GATE FL 150# CS Tr13CR 400NB 28.02.2018
VLV GATE FL 150# CS Tr13CR 400NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Temperature-limit-deg-C 371
Pressure-designation-ASME-C 150
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 151 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/ASB FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51301
Size-NB 400MM
GEAR OPERATED
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01540 77.20.62.217.5 12 Piece
VLV GATE FL 150# CS Tr13CR 450NB 28.02.2018
VLV GATE FL 150# CS TR13CR 450NB
VLV GATE FL 150# CS Tr13CR 450NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF SERR
Temperature-limit-deg-C 20 KG/CM2 AT 38 DEG.C
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 152 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPWD SS316/CAF FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 450MM
"GEAR OPERATED,IBR CERTIFICATION"
LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01550 77.20.62.229.5 20 Piece
VLV GATE FL -- 150# CS Tr13CR 600NB 28.02.2018
VLV GATE FL -- 150# CS TR13CR 600NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 38 DEG.C
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 153 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3309 REV.3
Size-NB 600
LATEST REVISION AS ON 07.04.2012 : AES 3309 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 154 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________01560 77.20.62.287.7 70 each
VLV GATE FL 300# CS TR13CR 50NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Flanged
Design-spec API 600
Design-spec-end-flanges ASME B16.5 RF 125 AARH
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-bonnet BOLTED
Type-of-bore FULL
Mat-gasket-spw-filler SS304+GRAFOIL
Mat-packing-stem GRAPHITED ASBESTOS
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-body-seat-s STELLITED
Mat-spec-bolt-s ASTM A307 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51491
Size-NB 50MM
TEST PRESSURE WITH AIR:80 PSI
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01570 77.20.62.288.5 350 Piece
VLV GATE FL -- 300# CS Tr13CR 50NB 28.02.2018
VLV GATE FL -- 300# CS TR13CR 50NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 155 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Temperature-limit-deg-C 20 KG/CM2 AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3310 REV.4
Size-NB 50
LATEST REVISION AS ON 07.04.2012 : AES 3310 REV 5
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 156 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01580 77.20.62.290.5 168 Piece
VLV GATE FL IBR 300# CS Tr13CR 50NB 28.02.2018
VLV GATE FL IBR 300# CS TR13CR 50NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service IBR
Temperature-limit-deg-C 20 KG/CM2 AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 157 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3310 REV.4
Size-NB 50
IBR CERTIFICATION
LATEST REVISION AS ON 07.04.2012 : AES 3310 REV 5
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01590 77.20.62.292.5 302 Piece
VLV GATE FL 300# CS Tr13CR 50NB 28.02.2018
VLV GATE FL 300# CS Tr13CR 50NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 300
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/ASB FILL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 158 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51401
Size-NB 50MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01600 77.20.62.293.5 110 Piece
VLV GATE FL IBR 300# CS Tr13CR 80NB 28.02.2018
VLV GATE FL IBR 300# CS TR13CR 80NB
"Valves,Gate,Wedge type, bolted,Flanged"
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service IBR
Temperature-limit-deg-C 20 KG/CM2 AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 159 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3310 REV.4
Size-NB 80
IBR CERTIFICATION
LATEST REVISION AS ON 07.04.2012 : AES 3310 REV 5
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 160 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)______________________________________________________________________________________________________________________________________________01610 77.20.62.294.5 120 Piece
VLV GATE FL -- 300# CS Tr13CR 80NB 28.02.2018
VLV GATE FL -- 300# CS TR13CR 80NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-gland-eyebolt-s SAE 4140
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 161 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3310 REV.4
Size-NB 80
LATEST REVISION AS ON 07.04.2012 : AES 3310 REV 5
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01620 77.20.62.296.5 262 Piece
VLV GATE FL 300# CS Tr13CR 80NB 28.02.2018
VLV GATE FL 300# CS Tr13CR 80NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 300
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/ASB FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51401
Size-NB 80MM
Unit Basic Rate (In Words) : ____________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 162 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01630 77.20.62.299.5 52 Piece
VLV GATE FL IBR 300# CS Tr13CR 100NB 28.02.2018
VLV GATE FL IBR 300# CS TR13CR 100NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service IBR
Temperature-limit-deg-C 20 KG/CM2 AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 163 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3310 REV.5
Size-NB 100
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01640 77.20.62.300.5 102 Piece
VLV GATE FL 300# CS Tr13CR 100NB 28.02.2018
VLV GATE FL 300# CS Tr13CR 100NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 300
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 164 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/CAF FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51401
Size-NB 100MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01650 77.20.62.304.5 10 Piece
VLV GATE FL IBR 300# CS Tr13CR 100NB 28.02.2018
Valves,Gate,Wedge type, bolted,Flanged
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service IBR
Pressure-designation-ASME-C 300
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-bonnet CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 165 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51402
Size-NB 100
LOCK OPEN
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01660 77.20.62.305.5 56 Piece
VLV GATE FL IBR 300# CS Tr13CR 150NB 28.02.2018
VLV GATE FL IBR 300# CS TR13CR 150NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 166 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Service IBR
Temperature-limit-deg-C 20 KG/CM2 AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3310 REV.4
Size-NB 150
LATEST REVISION AS ON 07.04.2012 : AES 3310 REV 5
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 167 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01670 77.20.62.306.5 70 Piece
VLV GATE FL -- 300# CS Tr13CR 150NB 28.02.2018
VLV GATE FL -- 300# CS TR13CR 150NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 168 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3310 REV.5
Size-NB 150
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01680 77.20.62.307.5 172 Piece
VLV GATE FL 300# CS Tr13CR 150NB 28.02.2018
VLV GATE FL 300# CS Tr13CR 150NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 300
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/CAF FILL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 169 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51401
Size-NB 150MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01690 77.20.62.311.5 50 Piece
VLV GATE FL -- 300# CS Tr13CR 200NB 28.02.2018
VLV GATE FL -- 300# CS TR13CR 200NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 170 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3310 REV.4
Size-NB 200
LATEST REVISION AS ON 07.04.2012 : AES 3310 REV 5
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 171 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________01700 77.20.62.312.5 12 Piece
VLV GATE FL IBR 300# CS Tr13CR 200NB 28.02.2018
VLV GATE FL IBR 300# CS TR13CR 200NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service IBR
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3310 REV.4
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 172 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Size-NB 200
LOCATION: GAS TURBINE # 3.
LATEST REVISION AS ON 07.04.2012 : AES 3310 REV 5
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01710 77.20.62.315.5 12 Piece
VLV GATE FL 300# CS Tr13CR 200NB 28.02.2018
VLV GATE FL 300# CS Tr13CR 200NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 300
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316-GRAFOIL FILLER
Mat-packing-stem INCONEL BRAIDED GRAPHITE
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51401
Size-NB 200MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 173 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01720 77.20.62.317.5 26 Piece
VLV GATE FL -- 300# CS Tr13CR 250NB 28.02.2018
VLV GATE FL -- 300# CS TR13CR 250NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 174 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3310 REV.4
Size-NB 250
LATEST REVISION AS ON 07.04.2012 : AES 3310 REV 5
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01730 77.20.62.319.5 6 Piece
VLV GATE FL 300# CS Tr13CR 250NB 28.02.2018
VLV GATE FL 300# CS Tr13CR 250NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 300
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND GRAFOIL
Mat-packing-stem INCONEL BRAIDED GRAPHITE
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 175 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________ Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51401
Size-NB 250MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01740 77.20.62.323.5 16 Piece
VLV GATE FL -- 300# CS Tr13CR 300NB 28.02.2018
VLV GATE FL -- 300# CS TR13CR 300NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2 AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat INTEGRAL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 176 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A307 GRADE B
Mat-spec-gland-eyebolt-s SAE 4140
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3310 REV.4
Size-NB 300
LATEST REVISION AS ON 07.04.2012 : AES 3310 REV 5
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01750 77.20.62.890.5 10 each
VLV GATE FL IBR 300# CST Tr13CR 100NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Flanged
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125AARH
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 177 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Service IBR
Temperature limit 371
Pressure-designation-ASME-C 300
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/CAF FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory add reqrmts EIL SPEC.SHEET No.51401
Size-NB 100MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01760 77.20.63.169.5 32 Piece
VLV GATE FL H2O 150# CS TrAL-BRZ 80NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service SEA WATER
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet CAST,BOLTED
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 178 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALUMINIUM BRONZE
Mat-stem ALUMINIUM BRONZE
Mat-wedge ALUMINIUM BRONZE
Mat-body-seats ALUMINIUM BRONZE
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALUMINIUM BRONZE
Mat-packing-stem CRANE 187-I OR EQUIVALENT
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM B169 C-61300
Mat-spec-wedge-body-seats ASTM B148 -UNS C95500
Mat-spec-wedge ASTM B148 -UNS C95500
Mat-spec-body-seat-s ASTM B148 -UNS C95500
Mat-spec-back-seat-separate ASTM B148 -UNS C95500
Mat-spec-gasket-spw-windings ASTM B148 -UNS C95500
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3312 REV.3
Size-NB 80
SPECIFICATION SHEET:AE-S-3312 REV.2
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 179 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)______________________________________________________________________________________________________________________________________________01770 77.20.63.175.5 46 Piece
VLV GATE FL H2O 150# CS TrAL-BRZ 100NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service SEA WATER
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet CAST,BOLTED
Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALUMINIUM BRONZE
Mat-stem ALUMINIUM BRONZE
Mat-wedge ALUMINIUM BRONZE
Mat-body-seats ALUMINIUM BRONZE
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALUMINIUM BRONZE
Mat-packing-stem CRANE 187-I OR EQUIVALENT
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM B169 C-61300
Mat-spec-wedge-body-seats ASTM B148 -UNS C95500
Mat-spec-wedge ASTM B148 -UNS C95500
Mat-spec-body-seat-s ASTM B148 -UNS C95500
Mat-spec-back-seat-separate ASTM B148 -UNS C95500
Mat-spec-gasket-spw-windings ASTM B148 -UNS C95500
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3312 REV.3
Size-NB 100
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 180 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01780 77.20.63.181.5 72 Piece
VLV GATE FL H2O 150# CS TrAL-BRZ 150NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service SEA WATER
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet CAST,BOLTED
Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALUMINIUM BRONZE
Mat-stem ALUMINIUM BRONZE
Mat-wedge ALUMINIUM BRONZE
Mat-body-seats ALUMINIUM BRONZE
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALUMINIUM BRONZE
Mat-packing-stem CRANE 187-I OR EQUIVALENT
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM B169 C-61300
Mat-spec-wedge-body-seats ASTM B148 -UNS C95500
Mat-spec-wedge ASTM B148 -UNS C95500
Mat-spec-body-seat-s ASTM B148 -UNS C95500
Mat-spec-back-seat-separate ASTM B148 -UNS C95500
Mat-spec-gasket-spw-windings ASTM B148 -UNS C95500
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 181 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3312 REV.3
Size-NB 150
SPECIFICATION SHEET:AE-S-3312 REV.2
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01790 77.20.63.187.5 28 Piece
VLV GATE FL H2O 150# CS TrAL-BRZ 200NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service SEA WATER
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet CAST,BOLTED
Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALUMINIUM BRONZE
Mat-stem ALUMINIUM BRONZE
Mat-wedge ALUMINIUM BRONZE
Mat-body-seats ALUMINIUM BRONZE
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALUMINIUM BRONZE
Mat-packing-stem CRANE 187-I OR EQUIVALENT
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 182 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM B169 C-61300
Mat-spec-wedge-body-seats ASTM B148 -UNS C95500
Mat-spec-wedge ASTM B148 -UNS C95500
Mat-spec-body-seat-s ASTM B148 -UNS C95500
Mat-spec-back-seat-separate ASTM B148 -UNS C95500
Mat-spec-gasket-spw-windings ASTM B148 -UNS C95500
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3312 REV.3
Size-NB 200
SPECIFICATION SHEET:AE-S-3312 REV.2
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01800 77.20.63.193.5 24 Piece
VLV GATE FL H2O 150# CS TrAL-BRZ 250NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service SEA WATER
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet CAST,BOLTED
Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 183 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALUMINIUM BRONZE
Mat-stem ALUMINIUM BRONZE
Mat-wedge ALUMINIUM BRONZE
Mat-body-seats ALUMINIUM BRONZE
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALUMINIUM BRONZE
Mat-packing-stem CRANE 187-I OR EQUIVALENT
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM B169 C-61300
Mat-spec-wedge-body-seats ASTM B148 -UNS C95500
Mat-spec-wedge ASTM B148 -UNS C95500
Mat-spec-body-seat-s ASTM B148 -UNS C95500
Mat-spec-back-seat-separate ASTM B148 -UNS C95500
Mat-spec-gasket-spw-windings ASTM B148 -UNS C95500
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3312 REV.3
Size-NB 250
SPECIFICATION SHEET:AE-S-3312 REV.2
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 184 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________01810 77.20.63.199.5 8 Piece
VLV GATE FL H2O 150# CS TrAL-BRZ 300NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service SEA WATER
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet CAST,BOLTED
Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALUMINIUM BRONZE
Mat-stem ALUMINIUM BRONZE
Mat-wedge ALUMINIUM BRONZE
Mat-body-seats ALUMINIUM BRONZE
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALUMINIUM BRONZE
Mat-packing-stem CRANE 187-I OR EQUIVALENT
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM B169 C-61300
Mat-spec-wedge-body-seats ASTM B148 -UNS C95500
Mat-spec-wedge ASTM B148 -UNS C95500
Mat-spec-body-seat-s ASTM B148 -UNS C95500
Mat-spec-back-seat-separate ASTM B148 -UNS C95500
Mat-spec-gasket-spw-windings ASTM B148 -UNS C95500
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3312 REV.3
Size-NB 300
SPECIFICATION SHEET:AE-S-3312 REV.2
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 185 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01820 77.20.63.205.5 12 Piece
VLV GATE FL H2O 150# CS TrAL-BRZ 350NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service SEA WATER
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet CAST,BOLTED
Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALUMINIUM BRONZE
Mat-stem ALUMINIUM BRONZE
Mat-wedge ALUMINIUM BRONZE
Mat-body-seats ALUMINIUM BRONZE
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALUMINIUM BRONZE
Mat-packing-stem CRANE 187-I OR EQUIVALENT
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM B169 C-61300
Mat-spec-wedge-body-seats ASTM B148 -UNS C95500
Mat-spec-wedge ASTM B148 -UNS C95500
Mat-spec-body-seat-s ASTM B148 -UNS C95500
Mat-spec-back-seat-separate ASTM B148 -UNS C95500
Mat-spec-gasket-spw-windings ASTM B148 -UNS C95500
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 186 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3312 REV.3
Size-NB 350
SPECIFICATION SHEET:AE-S-3312 REV.2
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01830 77.20.63.211.5 16 Piece
VLV GATE FL H2O 150# CS TrAL-BRZ 400NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service SEA WATER
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet CAST,BOLTED
Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALUMINIUM BRONZE
Mat-stem ALUMINIUM BRONZE
Mat-wedge ALUMINIUM BRONZE
Mat-body-seats ALUMINIUM BRONZE
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALUMINIUM BRONZE
Mat-packing-stem CRANE 187-I OR EQUIVALENT
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 187 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM B169 C-61300
Mat-spec-wedge-body-seats ASTM B148 -UNS C95500
Mat-spec-wedge ASTM B148 -UNS C95500
Mat-spec-body-seat-s ASTM B148 -UNS C95500
Mat-spec-back-seat-separate ASTM B148 -UNS C95500
Mat-spec-gasket-spw-windings ASTM B148 -UNS C95500
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3312 REV.3
Size-NB 400
SPECIFICATION SHEET:AE-S-3312 REV.2
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01840 77.20.63.217.5 6 Piece
VLV GATE FL H2O 150# CS TrAL-BRZ 450NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service SEA WATER
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
"Type-of-bonnet CAST,BOLTED"
Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 188 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALUMINIUM BRONZE
Mat-stem ALUMINIUM BRONZE
Mat-wedge ALUMINIUM BRONZE
Mat-body-seats ALUMINIUM BRONZE
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALUMINIUM BRONZE
Mat-packing-stem CRANE 187-I OR EQUIVALENT
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM B169 C-61300
Mat-spec-wedge-body-seats ASTM B148 -UNS C95500
Mat-spec-wedge ASTM B148 -UNS C95500
Mat-spec-body-seat-s ASTM B148 -UNS C95500
Mat-spec-back-seat-separate ASTM B148 -UNS C95500
Mat-spec-gasket-spw-windings ASTM B148 -UNS C95500
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3312 REV.3
Size-NB 450
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01850 77.20.63.223.5 6 Piece
VLV GATE FL H2O 150# CS TrAL-BRZ 500NB 28.02.2018
Design-spec API STD 600
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 189 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Design-spec-end-flanges ANSI B16.5
Service SEA WATER
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet CAST,BOLTED
Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALUMINIUM BRONZE
Mat-stem ALUMINIUM BRONZE
Mat-wedge ALUMINIUM BRONZE
Mat-body-seats ALUMINIUM BRONZE
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALUMINIUM BRONZE
Mat-packing-stem CRANE 187-I OR EQUIVALENT
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM B169 C-61300
Mat-spec-wedge-body-seats ASTM B148 -UNS C95500
Mat-spec-wedge ASTM B148 -UNS C95500
Mat-spec-body-seat-s ASTM B148 -UNS C95500
Mat-spec-back-seat-separate ASTM B148 -UNS C95500
Mat-spec-gasket-spw-windings ASTM B148 -UNS C95500
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3312 REV.3
Size-NB 500
SPECIFICATION SHEET:AE-S-3312 REV.2
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 190 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01860 77.20.63.229.5 8 Piece
VLV GATE FL H2O 150# CS TrAL-BRZ 600NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service SEA WATER
Pressure-designation-ASME-C 150
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet CAST,BOLTED
Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALUMINIUM BRONZE
Mat-stem ALUMINIUM BRONZE
Mat-wedge ALUMINIUM BRONZE
Mat-body-seats ALUMINIUM BRONZE
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALUMINIUM BRONZE
Mat-packing-stem CRANE 187-I OR EQUIVALENT
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM B169 C-61300
Mat-spec-wedge-body-seats ASTM B148 -UNS C95500
Mat-spec-wedge ASTM B148 -UNS C95500
Mat-spec-body-seat-s ASTM B148 -UNS C95500
Mat-spec-back-seat-separate ASTM B148 -UNS C95500
Mat-spec-gasket-spw-windings ASTM B148 -UNS C95500
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3312 REV.3
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 191 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Size-NB 600
SPECIFICATION SHEET:AE-S-3312 REV.2
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01870 77.20.64.163.5 6 Piece
VLV GATE FL CAS 150# CS TrSS304 50NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service CAUSTIC AND AMINE
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim STAINLESS STEEL 304
Mat-stem STAINLESS STEEL 304
Mat-wedge STAINLESS STEEL 304
Mat-body-seats STAINLESS STEEL 304
Mat-gasket-spw-filler CAF
Mat-back-seat-separate STAINLESS STEEL 304
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 192 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-stem AISI 304
Mat-spec-wedge-body-seats AISI 304
Mat-spec-wedge AISI 304
Mat-spec-body-seat-s AISI 304
Mat-spec-back-seat-separate AISI 304
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51313
Size-NB 50
EIL SPECS:6-44-05/06/52
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01880 77.20.64.169.7 40 Piece
VLV GATE FL CAS 150# CS TRSS304 80NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Flanged
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Service CAUSTIC AND AMINE
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316/CAF FILL
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 193 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem SS 304
Mat-spec-wedge-body-seats SS 304
Mat-spec-wedge SS 304
Mat-spec-body-seat-s SS 304
Mat-spec-back-seat-separate SS 304
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51313
Size-NB 80MM
LOCK OPEN
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01890 77.20.64.305.5 6 Piece
VLV GATE FL CAS 300# CS TrSS304 150NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service CAUSTIC AND AMINE
Pressure-designation-ASME-C 300
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 194 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-trim STAINLESS STEEL 304
Mat-stem STAINLESS STEEL 304
Mat-wedge STAINLESS STEEL 304
Mat-body-seats STAINLESS STEEL 304
Mat-gasket-spw-filler CAF
Mat-back-seat-separate STAINLESS STEEL 304
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem AISI 304
Mat-spec-wedge-body-seats AISI 304
Mat-spec-wedge AISI 304
Mat-spec-body-seat-s AISI 304
Mat-spec-back-seat-separate AISI 304
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51413
Size-NB 150
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01900 77.20.71.410.5 2 each
VLV GATE FL H2 600# CS TrCS/ST 50NB 28.02.2018
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service HYDROGEN
Pressure-designation-ASME-C 600
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 195 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL/STELLITED
Mat-body-seats CARBON STEEL/STELLITED
Mat-gasket-spw-filler GRAFOIL
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-pkg-stem-intermd-rings -
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51504
Size-NB 50
MAT-PACKING-STEM: GRAPHITED ASB WITH SACRIFICIAL
INHIBITOR & INCONEL WIRE REINFORCEMENT.
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 196 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Other charges (if any ) : Please specify separately
_______________________________________________________________________01910 77.20.90.295.5 6 each
VLV GATE FLG IBR 300# CS TrSS316 80NB 28.02.2018
Name GATE VALVE
Design-spec API 600
Design-spec-end-flanges ANSI B16.5
Service IBR
Temperature-limit-deg-C 427 DEG.C
Pressure-designation-ASME-C 300
Type-of-wedge SOLID/FLEXIBLE
"Type-of-stem OUTSIDE SCREW & YOKE, RISING"
Type-of-bonnet BOLTED
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim STAINLESS STEEL 316
Mat-stem STAINLESS STEEL 316
Mat-wedge STAINLESS STEEL 316
Mat-body-seats STAINLESS STEEL 316
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51946
Size-NB 80
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 197 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Other charges (if any ) : Please specify separately
_______________________________________________________________________01920 77.21.65.537.5 2 Piece
VLV GATE THD BB 800# CS Tr13CR 50NB 28.02.2018
VLV GATE THD BB 800# CS TR13CR 50NB
Design-spec API STD 602
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-back-seat SEPARATE
Pressure-designation-ASME-C 800
End-connection-s ASME B1.20.1
End-connection-s NPT
Mat-body CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-body ASTM A105 NORMALISED
Mat-spec-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-stem ASTM A479 GRADE 410
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Type-of-gasket-bonnet JACKETED
Type-of-gasket-bonnet SPIRAL WOUND
Mat-spec-gasket-spw-windings AISI 304
Mat-gasket-spw-filler CAF
Mat-packing-stem GRAFOIL W/SUITABLE CORROSION I
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Add-reqrmts BPCL/R/AES-3308 REV.3
Size-NB 50
SPECIFICATION SHEET:AE-S-3308 REV.3
LATEST REVISION AS ON 07.04.2012 : AES 3308 REV 4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 198 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)______________________________________________________________________________________________________________________________________________01930 77.21.65.538.7 120 each
VLV GATE TH IBR 800# CS TR13CR 50NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Threaded
Design-spec API STD 602
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-back-seat SEPARATE
Service IBR
Pressure-designation-ASME-C 800
End-connection-s NPT/ASME B1.20.1
Mat-trim ASTM A182 GRADE F 6A
Mat-spec-body-bonnet ASTM A105 NORMALISED
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Type-of-gasket-bonnet SPWD SS304+ASB
Mat-packing-stem GRAFOIL
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Size-NB 50MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01940 77.21.67.163.7 60 each
VLV GATE IBR 150# CS TR13CR 50NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Flanged end
Design-spec API 602
Service IBR
Service STEAM
Pressure-designation-ASME-C 150
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 199 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Type-of-wedge SOLID/FLEXIBLE
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-stem RISING
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-trim ALLOY STEEL/13%CHROME
Mat-packing-stem GRAPHITED ASBESTOS
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51302
Size-NB 50MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01950 77.23.30.163.5 22 Piece
VLV GATE FL 150# SS TrSS304 50NB 28.02.2018
VLV GATE FL 150# SS TrSS304 50NB
Design-spec API 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 200 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-trim STAINLESS STEEL 304
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A351 -CF8
Mat-spec-stem AISI 304
Mat-spec-wedge-body-seats AISI 304
Mat-spec-back-seat-separate AISI 304
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51345
Size-NB 50MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01960 77.23.55.169.5 32 Piece
VLV GATE FL 150# 5CR TRAS/ST 80NB 28.02.2018
VLV GATE FL 150# C5 TrAS/ST 80NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 150
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-trim ALLOY STEEL/STELLITED
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 201 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-body-bonnet ASTM A217 GRADE C5
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A217 GRADE C5
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B16
Mat-spec-nut-s ASTM A194 GRADE 4
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51336
Size-NB 80MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01970 77.23.55.299.5 14 Piece
VLV GATE FL 300# 5CR TRAS/ST 100NB 28.02.2018
VLV GATE FL 300# C5 TrAS/ST 100NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF 125 AARH
Pressure-designation-ASME-C 300
Type-of-wedge FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-trim ALLOY STEEL/STELLITED
Mat-packing-stem GRAFOIL DIE MOULDED RINGS
Mat-spec-body-bonnet ASTM A217 GRADE C5
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A217 GRADE C5
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 202 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-bolt-s ASTM A193 GRADE B16
Mat-spec-nut-s ASTM A194 GRADE 4
Mandatory-add-reqrmts EIL SPEC.SHEET NO:51436
Size-NB 100MM
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01980 77.23.56.287.5 52 Piece
VLV GATE FL -- 300# 5CR TR13CR 50NB 28.02.2018
VLV GATE FL -- 300# C5 TR13CR 50NB
VLV GATE FL -- 300# C5 Tr13CR 50NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5 RF SMOOTH
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-gasket-bonnet SPWD SS304/ASB FILL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem METAL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A217 GRADE C5
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3311 REV.2
Size-NB 50MM
CHAIN OPREATED
LATEST REVISION AS ON 07.04.2012 : AES 3311 REV 3
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 203 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________01990 77.23.56.299.5 20 Piece
VLV GATE FL -- 300# 5CR TR13CR 100NB 28.02.2018
VLV GATE FL -- 300# C5 TR13CR 100NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SMOOTH
Mat-body-bonnet ALLOY STEEL 5CR-0.5MO
Mat-body ALLOY STEEL 5CR-0.5MO
Mat-bonnet ALLOY STEEL 5CR-0.5MO
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem CRANE 187-I OR EQUIVALENT
Mat-packing-stem METAL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A217 GRADE C5
Mat-spec-body ASTM A217 GRADE C5
Mat-spec-bonnet ASTM A217 GRADE C5
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 204 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Size-NB 100
SPECIFICATION SHEET:75.39.33.XXX.X (OR)
AE-S-3311 REV.3
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02000 77.23.56.311.5 8 Piece
VLV GATE FL -- 300# 5CR TR13CR 200NB 28.02.2018
VLV GATE FL -- 300# C5 TR13CR 200NB
Design-spec API STD 600
Design-spec-end-flanges ANSI B16.5
Service --
Pressure-designation-ASME-C 300
Type-of-wedge SOLID
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 205 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Finish-flange-facing SMOOTH
Mat-body-bonnet ALLOY STEEL 5CR-0.5MO
Mat-body ALLOY STEEL 5CR-0.5MO
Mat-bonnet ALLOY STEEL 5CR-0.5MO
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-wedge ALLOY STEEL 13 CHROME
Mat-wedge CARBON STEEL
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL
Mat-gasket-spw-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem CRANE 187-I OR EQUIVALENT
Mat-packing-stem METAL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A217 GRADE C5
Mat-spec-body ASTM A217 GRADE C5
Mat-spec-bonnet ASTM A217 GRADE C5
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A182 GRADE F 6A
Mat-spec-wedge-body-seats ASTM A216 GRADE WCB
Mat-spec-wedge ASTM A182 GRADE F 6A
Mat-spec-wedge ASTM A216 GRADE WCB
Mat-spec-body-seat-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings AISI 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3311 REV.2
Size-NB 200
SPECIFICATION SHEET:75.39.33.XXX.X (OR)
AE-S-3311 REV.1
LATEST REVISION AS ON 07.04.2012 : AES 3311 REV 3
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 206 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02010 77.23.70.425.5 2 each
VLV GATE FLG IBR 600# CS TR13CR 100NB 28.02.2018
Valves,Gate,Wedge type, bolted bonnet,Flanged
Design-spec API 600
Design-spec-end-flanges ASME B16.5 RF 125 AARH
Temperature-limit-deg-C 425
Pressure-designation-ASME-C 600
Type-of-wedge SOLID/FLEXIBLE
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-bore FULL
Type-of-back-seat RENEWABLE
Type-of-gasket-bonnet SPWD SS316+ASB
Mat-trim ALLOY STEEL/13%CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A217 GRADE WC6
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Size-NB 100MM
IBR CERTIFIED
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 207 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________02020 77.30.20.163.5 44 Piece
VLV GLB PT 150# CS Tr13CR 50NB 28.02.2018
VLV GLB PT 150# CS TR13CR 50NB
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2G AT 28 DEG.C
Pressure-designation-ASME-C 150
Type-of-disc-s PLUG
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seat-disc-seat ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-seat ALLOY STEEL 13 CHROME
Mat-disc-disc-nut ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-bonnet-extension ASTM A216 GRADE WCB
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3356 REV.4
Size-NB 50
Unit Basic Rate (In Words) : ____________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 208 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02030 77.30.20.165.5 20 Piece
VLV GLB PT 150# CS Tr13CR 50NB 28.02.2018
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 150
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 209 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52301
Size-NB 50
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02040 77.30.20.169.5 20 Piece
VLV GLB PT 150# CS Tr13CR 80NB 28.02.2018
VLV GLB PT 150# CS TR13CR 80NB
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2G AT 28 DEG.C
Pressure-designation-ASME-C 150
Type-of-disc-s PLUG
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seat-disc-seat ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-seat ALLOY STEEL 13 CHROME
Mat-disc-disc-nut ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 210 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-bonnet-extension ASTM A216 GRADE WCB
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3356 REV.3
Size-NB 80
SPECIFICATION SHEET:AE-S-3356 REV.4
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02050 77.30.20.171.5 14 Piece
VLV GLB PT 150# CS Tr13CR 80NB 28.02.2018
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 150
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 211 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52301
Size-NB 80
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02060 77.30.20.175.5 10 Piece
VLV GLB PT 150# CS Tr13CR 100NB 28.02.2018
VLV GLB PT 150# CS TR13CR 100NB
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2G AT 28 DEG.C
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 212 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Pressure-designation-ASME-C 150
Type-of-disc-s PLUG
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seat-disc-seat ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-seat ALLOY STEEL 13 CHROME
Mat-disc-disc-nut ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-bonnet-extension ASTM A216 GRADE WCB
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3356 REV.4
Size-NB 100
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 213 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02070 77.30.20.177.5 18 Piece
VLV GLB PT150# CS Tr13CR EIL 52301 100NB 28.02.2018
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 150
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52301
Size-NB 100
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 214 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02080 77.30.20.181.5 6 Piece
VLV GLB PT 150# CS Tr13CR 150NB 28.02.2018
VLV GLB PT 150# CS TR13CR 150NB
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2G AT 28 DEG.C
Pressure-designation-ASME-C 150
Type-of-disc-s PLUG
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seat-disc-seat ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-seat ALLOY STEEL 13 CHROME
Mat-disc-disc-nut ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-bonnet-extension ASTM A216 GRADE WCB
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 215 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3356 REV.4
Size-NB 150
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02090 77.30.20.183.5 10 Piece
VLV GLB PT 150# CS Tr13CR 150NB 28.02.2018
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 150
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-back-seat-separate ALLOY STEEL 13 CHROME
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 216 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52301
Size-NB 150
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02100 77.30.20.187.5 8 Piece
VLV GLB PT 150# CS Tr13CR 200NB 28.02.2018
VLV GLB PT 150# CS TR13CR 200NB
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 20 KG/CM2G AT 28 DEG.C
Pressure-designation-ASME-C 150
Type-of-disc-s PLUG
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 217 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seat-disc-seat ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-seat ALLOY STEEL 13 CHROME
Mat-disc-disc-nut ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-bonnet-extension ASTM A216 GRADE WCB
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3356 REV.4
Size-NB 200
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02110 77.30.20.189.5 4 Piece
VLV GLB PT 150# CS Tr13CR 200NB 28.02.2018
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 218 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 150
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52301
Size-NB 200
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 219 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Other charges (if any ) : Please specify separately
_______________________________________________________________________02120 77.30.20.288.5 30 Piece
VLV GLB PT 300# CS Tr13CR 50NB 28.02.2018
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 52 KG/CM2G AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seat-disc-seat ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-seat ALLOY STEEL 13 CHROME
Mat-disc-disc-nut ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A352 GRADE LCB
Mat-spec-body ASTM A352 GRADE LCB
Mat-spec-bonnet ASTM A352 GRADE LCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-bonnet-extension ASTM A352 GRADE LCB
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3357 REV.4
Size-NB 50
LOCATION: BPCL MUMBAI REFINERY.
Unit Basic Rate (In Words) : ____________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 220 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02130 77.30.20.290.5 48 Piece
VLV GLB PT 300# CS Tr13CR 50NB 28.02.2018
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 221 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mandatory-add-reqrmts EIL SPEC.SHEET NO:52401
Size-NB 50
LOCATION : FCCU COMPLEX
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02140 77.30.20.291.5 20 Piece
VLV GLB PT IBR 300# CS Tr13CR 50NB 28.02.2018
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Service IBR
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 222 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52402
Size-NB 50
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02150 77.30.20.293.5 2 Piece
VLV GLB PT 300# CS Tr13CR 80NB 28.02.2018
VLV GLB PT 300# CS TR13CR 80NB
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 52 KG/CM2G AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seat-disc-seat ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 223 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-disc-seat ALLOY STEEL 13 CHROME
Mat-disc-disc-nut ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-bonnet-extension ASTM A216 GRADE WCB
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3357 REV.4
Size-NB 80
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02160 77.30.20.295.5 12 Piece
VLV GLB PT 300# CS Tr13CR 80NB 28.02.2018
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 224 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52401
Size-NB 80
LOCATION : FCCU COMPLEX
LOCK/CAR SEAL CLOSED
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02170 77.30.20.296.5 32 Piece
VLV GLB PT IBR 300# CS Tr13CR 80NB 28.02.2018
Design-spec BS 1873
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 225 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Design-spec-end-flanges ANSI B16.5
Service IBR
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52402
Size-NB 80
LOCATION : FCCU COMPLEX
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 226 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Other charges (if any ) : Please specify separately
_______________________________________________________________________02180 77.30.20.299.5 38 Piece
VLV GLB PT 300# CS Tr13CR 100NB 28.02.2018
VLV GLB PT 300# CS TR13CR 100NB
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 52 KG/CM2G AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seat-disc-seat ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-seat ALLOY STEEL 13 CHROME
Mat-disc-disc-nut ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-bonnet-extension ASTM A216 GRADE WCB
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3357 REV.4
Size-NB 100
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 227 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02190 77.30.20.300.5 4 Piece
VLV GLB PT IBR 300# CS Tr13CR 100NB 28.02.2018
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Service IBR
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 228 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52402
Size-NB 100
LOCATION : FCCU COMPLEX
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02200 77.30.20.301.5 8 Piece
VLV GLB PT 300# CS Tr13CR 100NB 28.02.2018
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-disc-s ASTM A182 GRADE F 6A
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 229 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52401
Size-NB 100
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02210 77.30.20.306.5 10 Piece
VLV GLB PT 300# CS Tr13CR 150NB 28.02.2018
VLV GLB PT 300# CS TR13CR 150NB
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Service --
Temperature-limit-deg-C 52 KG/CM2G AT 28 DEG.C
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet CARBON STEEL
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seat-disc-seat ALLOY STEEL 13 CHROME
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 230 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body-seats ALLOY STEEL 13 CHROME
Mat-disc-seat ALLOY STEEL 13 CHROME
Mat-disc-disc-nut ALLOY STEEL 13 CHROME
Mat-gasket-spwnd-filler CAF
Mat-gasket-spwnd-filler SOFT IRON CLAD
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body-bonnet ASTM A216 GRADE WCB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-bonnet-extension ASTM A216 GRADE WCB
Mat-spec-disc-body-seat ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A182 GRADE F 6A
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 304
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-gland-eyebolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts BPCL/R/AES-3357 REV.4
Size-NB 150
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02220 77.30.27.412.5 16 Piece
VLV GLB PT 600# CS TrCS/ST 50NB 28.02.2018
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 600
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 231 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body CARBON STEEL
Mat-bonnet CARBON STEEL
Mat-trim CARBON STEEL/STELLITED
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats CARBON STEEL/STELLITED
Mat-gasket-spwnd-filler CAF
Mat-packing-stem INCONEL BRAIDED GRAPHITE ASB
Mat-spec-body ASTM A216 GRADE WCB
Mat-spec-bonnet ASTM A216 GRADE WCB
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A216 GRADE WCB
Mat-spec-body-seat-ring-s ASTM A216 GRADE WCB
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B7
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 2H
Mat-spec-bolt-s ASTM A193 GRADE B7
Mat-spec-nut-s ASTM A194 GRADE 2H
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52501
Size-NB 50
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02230 77.33.50.287.7 8 each
VLV GLB FLG 300# 5CR TR13CR 50NB 28.02.2018
Valves,Globe,Plug/ball type, bolted bonnet,Flanged
Design-spec BS 1873
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 232 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Design-spec-end-flanges ASME B16.5
Temperature-limit-deg-C 650
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body-seats ALLOY STEEL/STELLITED
Mat-gasket-spwnd-filler GRAFOIL
Mat-packing-stem GRAPHITED ASB W/INCONEL WIRE
Mat-spec-body ASTM A217 GRADE C5
Mat-spec-bonnet ASTM A217 GRADE C5
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A217 GRADE C5
Mat-spec-body-seat-ring-s ASTM A217 GRADE C5
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B16
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 4
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52436
Size-NB 50
COLOUR CODE: GREEN,TESTING BS 6755 ( PART1 )
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02240 77.33.50.299.7 2 each
VLV GLB FLG 300# 5CR TR13CR 100NB 28.02.2018
Valves,Globe,Plug/ball type, bolted bonnet,Flanged
Design-spec BS 1873
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 233 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Design-spec-end-flanges ASME B16.5
Temperature-limit-deg-C 650
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body ALLOY STEEL
Mat-bonnet ALLOY STEEL
Mat-trim ALLOY STEEL/13%CHROME
Mat-stem ALLOY STEEL/13%CHROME
Mat-body-seats ALLOY STEEL/STELLITED
Mat-gasket-spwnd-filler GRAFOIL
Mat-back-seat-separate ALLOY STEEL/13%CHROME
Mat-packing-stem GRAPHITED ASB W/INCONEL WIRE
Mat-spec-body ASTM A217 GRADE C5
Mat-spec-bonnet ASTM A217 GRADE C5
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A217 GRADE C5
Mat-spec-body-seat-ring-s ASTM A217 GRADE C5
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B16
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 4
Mat-spec-bolt-s ASTM A193 GRADE B16
Mat-spec-nut-s ASTM A194 GRADE 4
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52436
Size-NB 100
COLOUR CODE: GREEN
TESTING BS 6755 ( PART1 )
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 234 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Other charges (if any ) : Please specify separately
_______________________________________________________________________02250 77.33.50.305.5 4 Piece
VLV GLB PT FLG 300# 5CR TRAS/ST 150NB 28.02.2018
Design-spec BS 1873
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-stem OUTSIDE SCREW & YOKE
Type-of-stem RISING
Type-of-bonnet BOLTED
Type-of-back-seat SEPARATE
Type-of-gasket-bonnet SPIRAL WOUND
Facing-flange RAISED FACE
Finish-flange-facing 125 AARH
Mat-body ALLOY STEEL
Mat-bonnet ALLOY STEEL
Mat-trim ALLOY STEEL/STELLITED
Mat-stem ALLOY STEEL 13 CHROME
Mat-body-seats ALLOY STEEL/STELLITED
Mat-gasket-spwnd-filler GRAFOIL
Mat-back-seat-separate ALLOY STEEL 13 CHROME
Mat-packing-stem GRAFOIL DIE MOULDED RINGS
Mat-spec-body ASTM A217 GRADE C5
Mat-spec-bonnet ASTM A217 GRADE C5
Mat-spec-stem ASTM A182 GRADE F 6A
Mat-spec-disc-s ASTM A217 GRADE C5
Mat-spec-body-seat-ring-s ASTM A217 GRADE C5
Mat-spec-back-seat-separate ASTM A182 GRADE F 6A
Mat-spec-gasket-spw-windings ASTM A240 TYPE 316
Mat-spec-bolt-s-nut-s ASTM A193 GRADE B16
Mat-spec-bolt-s-nut-s ASTM A194 GRADE 4
Mat-spec-bolt-s ASTM A193 GRADE B16
Mat-spec-nut-s ASTM A194 GRADE 4
Mandatory-add-reqrmts EIL SPEC.SHEET NO:52436
Size-NB 150
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 235 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02260 77.33.51.287.5 4 Piece
VLV GLB PT FLG 300# 5CR TR13CR 50NB 28.02.2018
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet ALLOY STEEL
Mat-body ALLOY STEEL
Mat-bonnet ALLOY STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-spec-body-bonnet ASTM A217 GRADE C5
Mat-spec-body ASTM A217 GRADE C5
Mat-spec-bonnet ASTM A217 GRADE C5
Mat-spec-disc-body-seat ASTM A182 GRADE F 6
Mat-spec-disc-s ASTM A182 GRADE F 6
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6
Size-NB 50
LOCATION : FCCU COMPLEX
LOCK/CAR SEAL CLOSED
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 236 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________02270 77.33.51.293.5 8 Piece
VLV GLB PT FLG 300# 5CR TR13CR 80NB 28.02.2018
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet ALLOY STEEL
Mat-body ALLOY STEEL
Mat-bonnet ALLOY STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-spec-body-bonnet ASTM A217 GRADE C5
Mat-spec-body ASTM A217 GRADE C5
Mat-spec-bonnet ASTM A217 GRADE C5
Mat-spec-disc-body-seat ASTM A182 GRADE F 6
Mat-spec-disc-s ASTM A182 GRADE F 6
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6
Size-NB 80
LOCATION : FCCU COMPLEX
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________02280 77.33.51.299.5 8 Piece
VLV GLB PT FLG 300# 5CR TR13CR 100NB 28.02.2018
Design-spec-end-flanges ANSI B16.5
Pressure-designation-ASME-C 300
Type-of-disc-s PLUG
Type-of-bonnet BOLTED
Facing-flange RAISED FACE
Finish-flange-facing SERRATED
Mat-body-bonnet ALLOY STEEL
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 237 of 240
Item Material Qty Unit Unit Basic Rate
Description Delivery date (in Figures)_______________________________________________________________________Mat-body ALLOY STEEL
Mat-bonnet ALLOY STEEL
Mat-trim ALLOY STEEL 13 CHROME
Mat-spec-body-bonnet ASTM A217 GRADE C5
Mat-spec-body ASTM A217 GRADE C5
Mat-spec-bonnet ASTM A217 GRADE C5
Mat-spec-disc-body-seat ASTM A182 GRADE F 6
Mat-spec-disc-s ASTM A182 GRADE F 6
Mat-spec-body-seat-ring-s ASTM A182 GRADE F 6
Size-NB 100
LOCATION : FCCU COMPLEX
Unit Basic Rate (In Words) : ____________________________________________________
Excise Duty % : ________ % VAT% : _________ % CST% : ___________ %
Excise tariff no./Chapter id : ______________
Packing & Forwarding Charges : ________ % per unit OR ____________ (INR) per unit
Freight Charges : ________ % per unit OR ____________ (INR) per unit
Third party Inspection charges : ________ % per unit OR ____________ (INR) per unit
Octroi Charges(If applicable) : ________ %
Other charges (if any ) : Please specify separately
_______________________________________________________________________Grand Total (inclusive of all taxes, duties/charges etc)
In figure:
In Words :
_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 238 of 240
TERMS & CONDITIONS_______________________________________________________________________ Important Notice_______________________________________________________________________ Sr.No Description_______________________________________________________________________ 001 Quotation received after due date will not be entertained
002 Your quotation must specify exact amount or percentage discount,
Excise, S.T., Charges, Transport, Packing & forwarding, Octroi, etc.
as applicable.
003 In case you are unable to quote, kindly send the quotation with a
regret for our records. Non-receipt of a regret will adversely
affect your vendor rating.
004 No quotation will be accepted without your rubber stamp and
signature.
005 Your quotation must be strictly in enclosed envelope
indicating Collective RFQ No., RFQ No. and due date.
006 For all future correspondences please mention the vendor code
Collective RFQ Number & RFQ Number.
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 239 of 240
-------Tear off Portion to be pasted on the envelope containing offer------------
_______________________________________________________________________Collective RFQ No. : 1000246245
Our Reference: Due Date : 04.01.2016
RFQ No. : 6000892209 Due Time : 13:00:00
Subject: RATE CONTRACT FOR GATE, GLOBE & CHECK VALVES FOR MR, KR AND NRL
To,
FIRST FLOOR, ADMINISTRATIVE OFFICE,
MUMBAI REFINERY, MAHUL, CHEMBUR
Mumbai
400074
Purchase Group : N52-Ref CPO Proc GR 2_______________________________________________________________________
To: BPCL ESTIMATE MUMBAI - 400038 India (300648)
For Bharat Petroleum Corporation Ltd.Vendor Sign & StampPage 240 of 240
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ���������������
�� �
�������� ���� ����� �������������� ���� � ������8�
��
������������������������� �������������������������������������������������������������������� �����������������
����� ������������������ ��� ����� ��������������� ������������������� ��� ��� ���� �� ���������� �� � �� �� � ����������� ��������������� �� �!������ � � �"���#�$��%�� �� ���� �� �� ���&��� ����!�� �� '�������� ��#�(��� �� ������)�*�� �� $��+� ��,���*��� �-�!��� �!���� ���
� ��.�/0��)���.���� $�1�2�/!�3��4���35���������6���)���������������������������� � � �7$��2�/!�3�4���1�����������6��"���#$��81��
���� � ������������������
�"#$%��
�&'(&)%)*�
�
�&)+*,-.*/&)�� !"#$%!&�
�(%./=/."*/&)�
��
#���� ���� ��09���3$�����(�#���:���� ���3%���;�6��
�����
#� ��� #������ ��09���3$����(�#��
�
����� ��� �� $8+����������:"��!��� �6�:'�� ��33%�37%�#'"��� ��� ��. �!�� � �*���1���!� 6��
�����
� � �
�� ���''��
��� ���
�(��)�)*� �+$,!"�-.!/0#����#1%2%+/������
�� �'� � � �
�� 33� �� � 4�����)4� �
���� ��������� �� �������� �� ����� �� ��'��
��
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ���������������
�� �
�������� ���� ����� �������������� ���� � �����8�
��
(����� ������ $8+��������/�3$����(�#�'��� �!� ��<��*�����������������
�
#����������� �� �� �<�����:�!�<��/��������<�����6��
$8+����������3$����(�#�'��� �!� ��<��*�����������������
�
���������� ��� ������ ����������������������� ��
�������!�����"#�$�%$����
�"��!�%!����������!��"#%$$����
=�!5$%-!"#6�.!/67.##&2�!$#�/+"�!--#8"!5&#��
�
�����
#� ���#���� � ��09���$>8���#7��
�
��� ��#���� � ��09���$>8���#7/�8�7���#��
�
#� ��/��� ��".���
� ��09���$>1���3'��
�
#� �����?��� � �����8�1�!�.�����@�A�!?��������)����(�. ��<��*����)�����������������
�
��?��� ���� �!�� � �*��
� 7�����'��))�;�� �
�������!?� �� �� �<�����<��*���������)� �� ������
�� ����:)������� ����.����6�<��*�.�������!���� �� *��������
�����
B�?�� � ��09���3$����(�#�:���� ���3%���;�6��
�����
B�?��������� � �*�)*���� C��:<�.�*�6���"���������09���18>���D3��
�����
B�?��� .�� � ��09����$>1����3'��
�
������
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ���������������
�� �
�������� ���� ����� �������������� ���� � ������8�
��
��9����� $�� 9� ��.��*�� ��� � �87%�#'"�� �#��������� ��� ��<�����*�������
� .������ 3�� ����������*�������*������������)����� ��������������:"����86�� ��
�*� � )�� ���� <��*� ��?��� *���� ���� �� �������!� ��.�� �.�� )�� ��.�������.)���1�����������*��� ���� ��.���*�!? ��� ����D�0��
�� � (*����*�������)�� ������� ��������� �� �!���� �� ��#���������
� �� 8�� 0*��������*����*������ ��.��E-��C����)���� ��<��*�E-�;�5��&�����
����������� :�#���))����6���)��#��F�)�!� �!���� @� � �)�!� ���� � � �*��� G.���/��H�� � �
� � �1�� 0��0������I���
�
� :!�� �'�������!� � � � � � � ������������������� #���� �� $%7�2�/!�3�� �� ����� �� $$%�2�/!�3��� #�!?������0��� 9� $$%2�/!�3���� :� (���� .��� �� '�������!� ���� �� *���� !� ��� � �� .������� ����� �
� *������������ ��������2��� ���������.��� ��)�.������ ����
� 5�� ����������������%�%�2�/!�3��:<��*��������������� �<���6� ���������� � �� %�� ��� ���*����*����!� !� ��!/)������������ �!�� � �*����99�������� � � �� ��� ������ $1-� � �� ������ *���� ��� )������� <��*� ������ ���� �)���� ��
��!*� ��@��*�.���� ���<���*��)���!����� !��.����� � � �� 7�� ����)���!����� !�)� *���� ��� )������� � � ���*� � �� � � �*�� ������ � ���
��� ��� ��)��������)��!*���4����� �;����;����������������������� � �� � 9� . �!�.�� <��*� ��!*� ���� � � ������ *���� .����� �� ���� !��� �!����
!� ��� �� �*��� ���� �*�� ������ *���� ��� � �� . �!�.��� � �� ������ � ��!!��� !��<��*��� ������).������ � !�.�� �� �*��!��.���� ��� ���*��� �� ��*�����.��������*���G.���� ���
� � �� 0*������!��� �!����*����!������ . �*��*�� ����<� ��� ������ ���
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ���������������
�� �
�������� ���� ����� �������������� ���� � 8�����8�
��
� $�� ���� �!���� .����� ���������� 3�� ���.!����!�)��� �� ������ �� ���� 8�� 9�������.��� ������.�������!��)� � ����� 1�� '�������!�����)�.�� ������/����J�#�!?������������<*�!*���!*�
������*����� �!�������<��*�������� %�� ��� �� �!���� ���?���)������������
� ��� �;�� ��� �������)*��!������.������*���� . �!�.��� �������(��� � �����������<;��� ������������
� $�� � ���=>%$#,#/"2��� � � � �� ������ � � �*�� ).!*��� ���� �� ������ �G.�� �� �))����� . ��� �#�@�
�� . �!�.�� *���� �� ��� ��� ����� � �!���� !��� �!���� � � ���� ������ � �� ��� � #����� ���.����� @� �.��� �!!�)���� � �� !�. ���� ��� ��� #������ )�!��� ��.�*������ ��.������*��������� ��<��*��*���������
�
� �#� �1/,2��",*3��)+(%.*/&)�
�
� � �&� ��� �'�'��� ��� '��� ()"*����� �"��"+� '���,��)&�*')"�"� ���� �""����� ���(�*'����
����'��'�����&� '���-�-����'"�*'.����(�"��/��!0������ '�'��*�,(���*�� '��'����
�(�*�&�*�'����'�"�)���'����/�1��(("�-����(�*�&��������*.#�
�
� ���� ���� �������������4 >�A� ������������������������������������������������������������������������
� � � � �
� ����,� ��,(��� &"�,� ��*�� 2�'*�� �&� -�-��� "�*��-��� ��� �/�1���"���)��+�
3��2�����(�*'���2.��/�1����(�*'�"�&�"�&��3����'��'�����4��
�
� ���� ��'���+� 5�,�������� *��*6+� �'���+� �-��3� �&� ���(�*'���� *�"'�&�*�'��+�
"����,� *��*6� &�"� ,�'�"���� �&� �'�,� ���� 3����� 3�'�� ��.� ���.��"+�
*���'")*'�����&�����3���+������(�*6�����'*#�
�
� ���)����.��(�*�,���&���'��,��'�'���"�7)�"�,��'���&��/���$$+���'���-�-���
"�("����'���2.� '�����,(������2�� "�8�*'��������)((��"����� �)2,�'���&"����
2�'*���&�-�-��#��
�
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ���������������
�� �
�������� ���� ����� ������ ���� ������ ��������
��
������������������ ��������������� ��������������������������������������������
�������������������������������������������������������������������������
���� �!"#$��������������������������������������������������������������������������������������������������������������������昂昂昂昂�
�
����� ���������� � ������� ���� �������� ��������� ������� ��� ��������������������
���� ����������� ��������������!����������������"����#$��������������%������
������������������� ��&�� �������� �������������������������� ����&��'�����
�����������"���������������� %�
�
%��� ##&'!()&$��*(+,(-,���������������������������������������������������������������������������������������������昂昂昂昂�
�
($)�*�+��,�����������&�������-�����.� ����������/���0$��1�� ��������%�
�
($)�23���,�� ����) ������� �-������ �%�
�
���� �*$.���$/!-'#*'"+����������������������������������������������������������������������������������������������������昂昂昂昂�
�
� )���� ������������������������,��������������� ����������� ����&�������������!��
����������������������������������������������������� ���"�.��!�������� ������� ����������� ��%%� �
�
� ��/�����������������������������,������4�������4�0$���
������������5�� �� ,� (0�)����6��
������������7 ��� ,� ���.���!�������(0�)�8��*%���������%�
������������������������������������������������������) ��� ��"������������(0�)��8��%+��90$�:�
� �
� $��������;�����������������,���������<�%��=�;��+����+�����%���>�(������($)�*�+���������������������������
� ����������� � �31%2�=�;��+���1������%����>��������������������������������������攻攻攻攻�� �
� 5�������"� ,� 0������������
�
� �������� ,� #$�������
� � �
�� ��� � �� �� ��!�"!�"� �#$%&'�()&*+,�-��,./0/#*�����昂昂昂昂�
"� ���� ���� "1!�2!2�� �#$%&'�()&*+,�-��,./0/#*�����攻攻攻攻�
�� ���� ��� ��!��!21� �
�� ���� ���� "3!�4!2�� �
���!� ������������ ����������� ����� �� �����
�
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ���������������
�� �
�������� ���� ����� ������ ���� ������ %�������
��
��� �"+/*-0!*'"+�1���(*$-'(&�
�������������222222222222222222222222222222222222222222222222222222222222222222�
��������������(&3$�!".#"+$+*� ���������"+/*-0!*'"+� � �(*$-'(&��#$!'4'!(*'"+�
� ������������$50'-$,�
�������������222222222222222222222222222222222222222222222222222222222222222222��� 8��"� ������� (��?�(@��2� ����������
� � � � ����� ��%+2A��'%� �
�
� 8� ��� 8������ (��?�(@��2� ���������
�
� ����� 5��� �� �<A���%�������90������ �:;��������������攻攻攻攻�� � � � (@1B3@1��@+;(@��+@����*�
� � � � ����@<�#�� ����+2��#8��� %�
� � � � ��������� �����%B������ �
�
� C������ ������ � �<A����������� #����� ��!�����
� � � � � � ���������(���"�
� �
� 8��"�����5� �� 5� �!���� � �<A����������
� � 9����!���;� � #����� ��!�������������(���"�
� � !������:� �
�
� # ��C����� 5��� �� ?�������)�� �(��?�(@<<�;����������攻攻攻攻�� � � � (��?@(@+�*�C�8�;�������������
� � � � (���2�;�D�������)�� �(�*<*�;�
� � � � )����*2���%1���;��+�
� � � � �()-'!(*$,�6(+,�76$$&/�(-$�+"*�
� � � � �(!!$#*()&$�� � � �� � � � �
� 8� ���;��� ��8����� � � (��?�(@�3<���%8B�
�
� 8� ���;��� ��0���� � � (��?�(@�31���%+#� ��
� �
� 8� �����.��� � � ()�)�@�<�1����������&�E�.���������
������������������������������������������������������������������������������������������C�� ��!���������������
�����������������������������������������������������������������������������������(����������������
�
� ��.����������� ���� � �+2�((5#��'%�
�
� �����$�.� �� 5� �!����!���� ������9���������������������������������������攻攻攻攻�� � �������� �� � ���������:�!������������
� � ������ �������� �� �������%� �
� �
�������������F�.�� � � (��?�(���2�90��������&���������������攻攻攻攻���� � � � ���� ��%+2A��'%:�
�
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ���������������
�� �
�������� ���� ����� ������ ���� ������ ��������
��
� �
�������������F�.��������� � � $����������� /��9!������:;����������攻攻攻攻�������� � � � 0�@������%�(��?�(�1<3���%D+�
�
� F�.��� ��� � � (��?��(@�31���%�+#�
�
�� �6(+8$�'+�.$*(&&0-8@�/6(&&�+"*�)$�#$-.'**$,�0+&$//�.$+*'"+$,�'+�*6$�����
�
���������������%� � 8��"� ���� �� �� �� !����� ����� ���� �� ����� ��� ���� �� � � <B2� #8� !����
�� �����2��#8������ �������!�� ������� �� ���������������%�
�
����� +��(��������� �������� �������������������� ������$�@�$@*� 90(�7@<:� �� ��� �
�� ����!���� �.��� ���� ������ ����������(���� ���� �� �� �������� ��� ��� 1���
���%��%���� ���� ����� ����. ������*��D��&� �C��������������� ���� �������
��"���� ������� ���)85������%�
�
?��� �$/*'+8�
�� ��������:��#"����������
� � ������������ ��
� � � ��8��"� ���������,���+���=�;��+���
� � ������������������������������,����22�=�;��+��
� � �������8�.������������:����22�=�;��+��
�������������������C���� ����� ��� #"��������� ����� �� ����� �� �� � � �������� �������� � ) �������%�����������
(���� �����"�=����� ���"�������������������������� �%�
�
� � ������������������2%2�=�;��+��9!������������������� �!���:%���������������������������攻攻攻攻�
�
� �:��(������($)�23������� ��-�) ������� ���������� �&�8��"�;�����-�8�.��������������
�����������������������A���������������������������"������ �������%���������������������������������昂昂昂昂��
�������������:���(�����"��������� ��� ������������ �&���������������������� ��� ���������
�������������������!�������� ��� ��"� ���'��� ��"���������.�� �%�$ ���������������������������
���������������������������������� ������� ��������������������"� ��� ������������������%����昂昂昂昂����������������������������
�
� ��������+,$-�+"�!'-!0./*(+!$�/6(&&�(+@�"4�*6$�()"3$�*$/*/�)$�7('3$,�"44������������昂昂昂昂�
����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
������������������1��6'-,���(-*@���+/#$!*'"+�����������������������������������������������������������������������昂昂昂昂��
9:� ? ��������������.���� ���� ������� ������� � ������� �����������"��
8$�G�;�������$��"�) ������� �(�� �"%��
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ���������������
�� �
�������� ���� ����� ������ ���� ������ �������
��
�
9�:� ����� ���������������������H����"�(���� ���$� ����������"�����������
���"�� ������� ��� �"%��
�
9�:� #�!����&�8$�G� ����� �������� ���� ������ �������� ��������� �������� ���������"�
���� ����� �!�����!����� ������ ����� ���������������� ���������"��
�������8$�G�) ������� �D������ �%�
�
9�:� (��������� ���������� ���� ��������������� � �������� � ���������"��$)�������
H($����������"�����&�� ����������!����!��������"�8$�G�� �!���� �%�
�
9�:� 8$�G�;�������$��"�) ������� ����������.�;�!�� ������������!� �,�
�
�%������������������"�� ������� ������!�� ���� �������"�����8��"�;�����;�8�.���
�����"���������-��������������A������%�
���������
��%� � ��������������"�� ������� �� �� � ��������� ������ ������+�A�����
�������������� ���"&� ����� ����.��������� �� ��� ���� �� ����� ������
����&��� ����'&� �� �� ����!���&�!����&������� I�� �&���� ������ ����
����&� � �������"� ;��� ���!��� ����. ���&� � �����.����������� �������&�
���.��� ����������� ���� �����!�������. ���&�������������� ��� %�
����� �� ������������� ��� �����.������������������ �������������"�
���� ������ ���"� � ������� � �� �� !���� ���� �������� ������� ���%� � ( "�
������� � ��� �������� ����� ������ ��� ��� � � ��������������� � ���������
��I�����%� ) � ���� ����� ���� ��� ��� ���� � � � ��������������� &� ($)� *�+�
���������� %�
�
���%� (��� �������2�A�������������������.����������������������"%�
�
��%� � ����� � �������� �� �������� �"� ������ ���"� � ������� � ����� � �"� ���
���������)85�������%��
�
�%� ���������������"��� ������� ������!�� ������������ �"����;���� ������$?)��
9$������������������ ������� :�������������������A�� ����"����������
������ �� ���� ��������� ���%� ������� "� ������� � ��� ��� ����� ����
��������� ����($)�*�+������������������� &��������������������� �����"�
���� ������ ������� � ����� �� �� ��I������ �� ���� � �������� �����
�������������������������%�
�
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ���������������
�� �
�������� ���� ����� ������ ���� ������ ?�������
��
��%� ��������������"�� ������� �����������!������ ������;�������������� �������
��������-���"��������������������������� ��� ���!����������������
���������%��
�
���%� �(����������'���������)85�����������������������"������$)%�������������������������������������������������
�
����������������������������������1������/6(&&��+"*��)$��7('3$,��"44��0+,$-��(+@��!'-!0./*(+!$����������������������
�
;��������<0(&'*@����������������������������������������������������������������������������������������������������������������昂昂昂昂�������
������������ � ���������� ��������� ��������������������� "����� ��;�������"����������
����%�)������������������� �������"�������� ���������������.���������������%�
( "����� �������������.������� ���I�� ��&��� ����� ������ ���"��������������
������������� ������� &����������������� ����I�����%�#�!������ �� �� ���������
��������� ���������������������&����������������������I������ ������� ��������������
��������������������������������������%������
�
�!���� �(+04(!*0-$-/���$/*���$-*'4'!(*$��
? ��������!���������������������������������������������������� ���� ������
������ ���� ��� � � �������� �� ������� � � ����� ��� !���� �� ���� ����������
� ����� ��������������� ��� �������� � ���������"������������������ ��%�
�
� � �����������������������������"��� ������������!� ��� ������ ,�
�
� � �%��������������� ������ �����%�
�
� � ��%����$����������������� � ������ ��� �%�
�
� � ���%���?������������������������������� � ��%�
�
���������������%��#���;�����;������ �%�������������������������������������������������������������������������������������昂昂昂昂��������
�������������%���5���������������������;���"����������%��������������������������������������������������������昂昂昂昂""""�
� ��%���#"���������������������������������"&�������-����.������� ��������������
������������������������!���������������������������"��!��������%�������������������������������������攻攻攻攻��� �
����%�)�� ������� ���.��������($)�*�+%�����������������������������������������������������������攻攻攻攻��
�
�
�
�
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ���������������
�� �
�������� ���� ����� ������ ���� ������ ��������
��
�
=����������(->'+8��������������������������������������������������������������������������������������������������������������昂昂昂昂��
7������������������ �����!������������!� ���������,�
�
���%�����#���;����� �����%���������������
�
���������������%����?������(��?����������� � �����%�������������������
������������������������
����%�����$)�;�)85������ �%��������
�
���������������%������/��;������
�
������ �(*$-'(&�!!$#*(+!$�����������������������������������������������������������������������������������������昂昂昂昂��
���������������� ������ ����� ��� ��������� � � 8$�G� !�������� � �"� �� ���� �� ��� �� �� ���
����� ����!������������!� �������� ��%�
�
�%����? ����������������������� ��� �������%�
� �
��%� ���������"�� ������� �������%�
�
���%������������"�� ������� �������� ���%�����������������������
�
��������������%���J���� ��)85������������ ������)))@�����)85��� ��� �� �%���������������������昂昂昂昂""""
�
������������������������� �����������8$�G�!�������������� �� ��������� ��������I������
��� � ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� %������������������������������������������������������������������������������������������������������昂昂昂昂��
�
� �
�
� � � ���
�
��
������������
������ ��� ��������������
����� ��������� ��� ����������������
�� ����������������� �
�������� ���� ����� ������ �� ����!� �����"�
��
�� ������������������ ����������� ���� ����� ��
���# ��$%�&���$%������� ��'��
� � � �
� � � � � �
���� �������������������������������������������������������������������������������������������������������������������������晃晃晃晃�
����� ���������� � ������� ���� �������� ��������� ������� �����������������������
���� ����������� ����������!�������� "�����#�����������"��������������������
����� ��#�� �������� �������������������������� ����#��$����������������!�
��������������� "�
�
��� ���� ���������������������������������������������������������������������������������������������������������晃晃晃晃�
%&'�(�)��*�����������#�������+�����,� ����������-���.&��/�� ��������"�
�
%&'�01���*�� ����' ������� �+������ �"�
�
���� ��������� �� ����������������������������������������������������������������������������������������������������晃晃晃晃�
� '���� *���������������� ����������������#��������������2� ��!�,��
� � � 2�������� ������� ������������ ��"�
� ���-������������������������������*�����������������.&��
�����
������������3�� �� *� %.�'������������4�
� �
� 5 ��� *� ' ��� ��!������������%.�'���6��")�"��7.&�8�9������������
� ������ ���������,����2�������%.�'�6��("������"����������������������������������� �
�������������� �
�����
�� ���� ���� �� ��� ������������������
�� ���� ���� ��� � ������������������� !�"�� "����!���
#� ���� ���� #�� $�%$� &"���!� '��(��)������"��
� ��� ****� � �% � *********�
� ���� �&�� $� ��% � ********�
��� � � ����� ���� ����� �� � �(��
���������
�
��
������������
������ ��� ��������������
����� ��������� ��� ����������������
�� ����������������� �
�������� ���� ����� ������ �� ����!� )����"�
��
� �
�������� *�����:!������� �7I�����#� �����+���8#�&� ��+�&�������%��#����
���������������������������������������������������#�#�6�����������<����9������7'63�9�.� �'638"��
����������������������������������������������������������������������������������������������������������������������������������������������晃晃晃晃�
����������������������������������������
&���������9� *� �=(")�>�9��)������)�����"���"��?��%������%&'�(�)���������攻攻攻攻�
� ����������� � 1)"@�>�9��)�������/������"��"��?����������������������������������������
� �
���� ��������� �������� ��
��������������������������������������������������������������������� ���������� ��������� �� ����� ������ ! ��� �� "�#� ���������������������������������������������������������������������� �
�������������6��!� �������%��A��%B��0"��
���������������������������������������������������������������������������������������������������7.��������8������� ��")0C��
�����������������������������������������������������������������������������������������������������$"�����������������������
� ���������6� ��� ����������6������ %��A��%B��0�7.��������8�
����������������������������������������������������������������������������������������������������
����������������� 3��� �#��=C���"��������7.��
������������������������������������������������������������������������������������������������������� �8#��%��A�%B/@1���"�
���������������������������������������������������������������������������������������������������/����9�%B��)���"��(�7:�� �����
���������������������������������������������������������������������������������������������������)����:6�A� "8�������������������昂昂昂昂�� �
������������<�������������������������������������������������������������� �=C���"���������������������������攻攻攻攻��
� 6��!�����3� �� ����������3� �2���� �=C���"���������������������������攻攻攻攻�
��������������������������������������������7����2���9������
���������������������������������������������������2�����8� �
� � � �
: ��<����� ����������3��� �� ���������������A��������'�� �%��A�%B==���9�����������������
�������������������������������������������������������������������������������������%B)�(�<�6�9�%B��0�9��D���������������������
�������������������������������������������������������������������������������������'�� �%B0=(�9��'����(0����"��
�������������������������������������������������������������������������������������/���9��)��
�������������������������������������������������������������������������������������$��� �����%���&%�������
����������������������������������������������������������������������������������������������������� �����������
6� ���9��� ��6����� � ���������������������������������������������%��A��%B�1=�����"�6@�
�
�
��
������������
������ ��� ��������������
����� ��������� ��� ����������������
�� ����������������� �
�������� ���� ����� ������ �� ����!� �����"�
��
�
�
��������������������������������������������������������������������������������� ���������� ��������� �� ����� ������ ! ��� �� "�#� ���������������������������������������������������������������������
�
6� ���9��� ��.���� � ���������������������������������������������%��A��%B��1/����"�):�
�
�����&�,� �� ����������3� �2����2������������������������7&������������ �����
����������������������������������������������������� �� ���������������������������2������������
� ���������������� ����������������������� �� �������"�����������攻攻攻攻�� � ������ � �
6� �����,��� ����������������<�� �� ���������������%'�'B=�/�E�,���������������
����������������������������������������������72������������B���������������2�� ���2����������������
� ������������B�� ����� ����8������������������%���������������
� � ������ � � �
��,������������� ���� � � ���)0�%%3:��$"�
�
F�,�� � � ��������������%��A�%�B���0�7.��������8����������
����������������������������������������������������������������������������������������� ��")0C��$"����������������������������
�
F�,��������� � ��������������������������������������������&��������6�� -��7<������8����������������������������������
����������������������������������������������������������������������������������������.�B3�����"�%��A�%�/=1���"��
�������������������������������������������������������������������������������������D)�#�%��A�%B/@=���"�/�(�
�������������������������������������������������������������������������������������7:�� �����0��6:.8����
� �
F�,��.��� � � ��������������%��A��%B�1/����"��):�
�
� ��������
�������������%��'� ���������'(�%������������ �������������� ���� ��%�)*�晃晃晃晃�����������������������������������������������������������������������������
� �
� � �"�������� �� ������������������� ������������)0��:6��� �����2����0��:6�
�� ���������� �������2�� ������� �� ����������������"������������������������
� �
� )"�� %�������������������������������������� ������&�B�&B(7.%�5B=8� ����� ��
�� ����2���� ��,������� ������ ��%���� ������ ������������� ���/������"���
��� ���� ����� ����, ���� �� (�� D��"�<����� ����� ����� ���� ���� ��� ��!�
��� ������� ���'63������"��
� � �
�
�
��
������������
������ ��� ��������������
����� ��������� ��� ����������������
�� ����������������� �
�������� ���� ����� ������ �� ����!� !����"�
��
�
�+��,��� �'�
�78�����:!����������������������
� � � �
� � �����6��!� �*���)�(��>�9��)��
� � ��������� �*����0���>�9��)��������������������������������������������������������������������
� � �����6�,������ �*����0���>�9��)����������� � �
<���������������:!��������������� ����������� �� ���������������������� ��
�������������������������' �������"��%���� �����!��>����� ����!�������������������������������� �"�
� ������������������ � �
7�8�������������������0"0�>�9��)���72������������������� �2���"8����������������������������
�7�8�����%������%&'�01������� ��+�' ������� ���������� �#�6��!�9�����+�6�,������
����������������������������"+� ,���������������������������!������ ��������������������������������晃晃晃晃��
�������������7�8����%������!���������� ��� ������������� �#���������������������� ��� �����������
����������������������2�������� ��� ��!� ���$��� ��!���������,�� �"�& ���������������������������
������������������������������������� ������� ��������������������!� ��� ������������������"����晃晃晃晃��������������������������������������
����������������������-������� �����������%�����(�!�%���� ��������&� ���!!�晃晃晃晃
.����������/)�0�,% ��)���(������� �������������������������������������������������������������������������������晃晃晃晃������������������������������
78� A ��������������,���� ���� ������� ������� � ������� �����������!��
6&�I�9�������&��!�' ������� �%�� �!"��
�
7�8� ����� ���������������������G����!�%���� ���&� ����������!�����������
���!�� ������� ��� �!"��
�
7�8� :�2����#�6&�I� ����� �������� ���� ������ �������� ��������� �������� ���������!�
���� ����� �2�����2����� ������ ����� ������������������� ����������!��
�������6&�I�' ������� �D������ �"�
�
7�8� %��������� ���������� ���� ��������������� � �������� � ���������!��&'�������
G%&����������!�����#�� ����������2����2��������!�6&�I�� �2���� �"�
�
7�8� 6&�I�9�������&��!�' ������� ����������,�9�2�� ������������2� �*�
�
��
������������
������ ��� ��������������
����� ��������� ��� ����������������
�� ����������������� �
�������� ���� ����� ������ �� ����!� �����"�
��
�
�
�"������������������!�� ������� ������2�� ���� �������!�����6��!�9�����9�6�,���
�����!���������+��������������C������"�
���������
��"�����������������!�� ������� ��� ����� ���������� ������� "��)�C����������
����������������� ���!#����������,��������� ��������� ������� ����������#�
�� ����$#� �� �� ����2���#�2����#������� E�� �#���� ������ ���� ����#��
�������!� 9��� ���2��� ����, ���#�� �����,����������� �������#����,���
�� �������� � ���� �����2��� ����, ���#� ��� ��� ������� ��� "�����
� �� ����� �������� ��� �����,��������� ��������� �������������!� ����
���������!�� ������� ��� ��2����������������������� ���"��% !�������� �
���������������� ������ ��� ���� ���������������� ������������E�����"�' �
��������� ������� ������� �� ���������������� #�%&'�(�)����������� "�
�
���"� �%��� �������0�C�������������������,����������������������!"�
�
��"� � ����� � �������� �� �������� �!� ������ ���!� � ������� � ����� � �!� ���
���������'63�������"��
�
��� �������������!��� ������� ��������2�� ������������� �!����9��� �����&A'��
7&���������������������� ������� 8��������������������������C��� ����!���������
���������������������������������"��������� !�������� ����������������
��������� ����%&'�(�)������������������� #��������������������� �����!�
���� ������ ������� � ����� �� �� ��E������ �� ���� � �������� �����
�������������������������"�
�
��"� ��������������!�� ������� �����������2������ ������9�������������� �������
��������+���!��������������������������� ��� ���2����������������
���������"��
�
���"� �%����������$���������'63�����������������������!������&'"�������������������������������������������������
�
�����������������������������/)�0�,)��%��������&� ���!!�������(� ������������
1��2��� �(��������������������������������������������������������������������������������������������������������������������晃晃晃晃��
������������ � ���������� ��������� ��������������������� !����� ��9�������!����������
����"�'������������������� �������!�������� ���������������,���������������"��
�
��
������������
������ ��� ��������������
����� ��������� ��� ����������������
�� ����������������� �
�������� ���� ����� ������ �� ����!� �����"�
��
�
�
������������% !����� �������������,������� ���E�� �#��� ���� ������ ���!���������� ����
������ � ������ � ������� #� ���� ����� ����� �� �� ��E�����"� :�2����� � � � �� �� ��
��������������� ���������������������#������� ����������������������������������
������"������
�
����� ����!��������,������� ! ������
A ��������2���������������������������������������������������� ���� ������
������ ���� ��� � � �������� �� ������� � � ����� ��� 2���� �� ���� ����������
� ����� ��������������� ��� �������� � ���������!������������������ ��"�
�
� � �����������������������������!��� ������������2� ��� ������ *�
�
� � �"��������������� ������ �����"�
�
� � ��"����&����������������� � ������ ��� �"�
�
� � ���"���A������������������������������� � ��"�
�
���������������"��:���9�����9������ �"����������������������������������������������������������������������������������晃晃晃晃��������
���"��3���������������������9���!����������"����������������������������������������������������晃晃晃晃""""�
� ��"���:!���������������������������������!#�������+����,������� ��������������
������������������������2���������������������������!��2��������"����������������������������������攻攻攻攻��� �
����"�'�� ������� ���,��������%&'�(�)"攻攻攻攻��
3�����4 �'�����������������������������������������������������������������������������������������������������������晃晃晃晃��
5������������������ �����2������������2� ���������*�
�"�����:���9����� �����"���������������
��"����A������%��A����������� � �����"�������������������������������������������
����"�����&'�9�'63������ �"��������
�
���������������"������-��9������
�
�
��
������������
������ ��� ��������������
����� ��������� ��� ����������������
�� ����������������� �
�������� ���� ����� ������ �� ����!� "����"�
��
������ ����� ����������������������������������������������������������������������������������������������������晃晃晃晃�
���������������� ������ ����� ��� ��������� � � 6&�I� 2�������� � �!� �� ���� �� ��� �� �� ���
����� ����2������������2� �������� ��"�
�
�"����A ����������������������� ��� �������"�
� �
��"� ���������!�� ������� �������"�
�
���"������������!�� ������� �������� ���"�����������������������
�
���������������"���H���� ��'63������������ ������'''B�����'63��� ��� �� �"�������������������晃晃晃晃�������
������������������������� �����������6&�I�2�������������� �� ��������� ��������E������
��� � ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� "�����������������������������������������������������������������������������������������������������晃晃晃晃��
��
��������������
���������������� �����������������������������������
������ ������������ ��� ���������
�����
����������������������� ��������������������� ���� �
��
��� ��� ���������� ����� ����������������������������!���"#�����$�������� �����%�&���
�� � � � � �
���� �����������������������������������������������������������������������������������������������������������������������塊塊塊塊������������������������������������
��������������� ������������������������������ ����������� ������������������
�������� ������� ���!����� ����"�������� #�������������$�������������������
����% ��#�� �������� �������������������������� ����#��&����������������"�
��������������� $��
�
�����������������������������������������������������������������������������������������������������������������������塊塊塊塊�������������������������������
�
���������'()�*��������������+������ ������� ���!����������,��������� ������$�
���������'�-.���*$�����+��(����� %��� ��� %������� %�$�
���������'�-.���*$����+��/������������� ��� ������ %���� ��$�
���������'�-.���*$01��+��!�����2�/� %��#��������� ��3���� %�� ��$�
���������-����(4���������+��5����"��� ����������������� %�#�������������� ������� $�
�
������������������������� ����������������������������������������������������������������������������������������������塊塊塊塊���������������������������������
� )���� +������������� ������� ���!����$��
������������������������������������������������������� �
� ��,�� +� ������ ������$��
� �
� 6�� %� +� '��)�������������
�
������������. ��� +� ) ��%���"�/� %���6/��������� ���������
� � � '��)����*$��
�
�
���
�'��� �(��� �)��"��"� �*+,-.�/0-123���$��34565*1��塊塊塊塊�
�� ��''�� ������ "7�� ��7� �*+,-.�/0-123���$��34565*1��昂昂昂昂�
"� ��'� ���� ��������� ���
�� ������������������� ���������������� ��������� ���
�� ������������������� ���������������� "%��%�7 � ���
����� ������������� ������������ ����� �����'��
��
��������������
���������������� �����������������������������������
������ ������������ ��� ���������
�����
����������������������� ��������������������� "��� �
��
�
� 6���%���"� +� 7 ��������������� %����� �$�������������� ���"��
������������������������������������������������������������ � %���� "��� %����������������$��
�
� (��������8� +� ��$���9%8����%�:�0;
������������<�'��(���
� ����������� � ��$1��9%8���%�:�0��
���������<��'��)����*�$01�
�
��������������������������
�
��!���
��������
�����������
"�#������
�
�������������$������
�
���"�
�
�
�� ���
�
�����
�
���� %�
�
�
�������
�
6��� %�
�
'��-� � '4��*� � �$� =���
>���� $����?��-&$@�
�
'��-�'4��*� �$�=���
�
�0?� ��$� ������ >��� ���� %#��
A�� ���� ���� 2� �B�� A�#��
������� �����$1������ @�
�
����昂昂昂昂�
�
�
�
�
�
�����昂昂昂昂�
��=��%��� ������>(�� 8����
/��&����@�
�0?� ��$� ������ 8� '��-� � '� ��*�����
�$�=���3�����0?���$�A����� %��
>�� $��$*�������C ���@�
�
�
���"�����6� %�� 6� �3����
>����3��8������
3�����@�
�0?���$������� 8�'��-��'���*� �$�
=��� 3���� �0?� ��$� A��� �� %��
>�� $��$*�������C ���@��
�
�
��C���������� %� � �0?� ��$� ������ >��� ���� %@�����
>A�� ��������A�$�-� $@�
�
昂昂昂昂�
A ��=����� �� 4���� %� -������� )�� � '��-� '� 00;� 8�
'��-�'���*� �$�=���8�� �)�� �8�
D�������)�� �'��-�'��0*�� �$�*�4��
昂昂昂昂�
��������������
�����
��
��������������
���������������� �����������������������������������
������ ������������ ��� ���������
�����
����������������������� ��������������������� ���� �
��
�
�
��!���
��������
�
����������
"�#������
�������������$������ �
� � 1�4�;� ��� *�41�4��8� )�� �;*�� > �$�
1��8��@��
%���������&����'&����������
��������������
�
�
�� ��������� � '��-��'4�E0�� �$��B�
�
�
� �������� � '��-�'4�E0�� �$��B�8�'�0�B��
�$���8��'.��1�1��
�
�
�� ���8� � �������
�
� '��-��'��E1�� �$��A� �
�C�����������
� ����
�
� B��''6A������&$�
�
�
�����(�C� %� 6� �3���� 3����
�������� ��
� �������
�
) �� ��� ������� ������� '��������
3�������������������� ��� ���������
�
�
昂昂昂昂�
F�C�� � '��-��'���*�� �$�=������������������������
�
昂昂昂昂�
F�C���������� � (�������� ��� ,�� >=���%��@�����
�����46�����$�'��-�'�10E�� �$D���
�
昂昂昂昂�
F�C������ � '��-�'��E1� �$��A�
�
�
�&��(�������������()��&���������������������
�
�$� ���� ���"� ���� �� %� �� %��� ���� ������� ����� ���� ��� ���� �� ���� A��
�� �����3��������A���� ���������� ����� ���� �������3�� ��������"�����
�� %� ��%�������������$�
� �
�$� '��������� �������� �������������������� ������(�4�(4*� >�'�.40@� �� ��� ��
�� ����3�������������6G 8�H� ��(�������������������3����"�����������
�
��
��������������
���������������� �����������������������������������
������ ������������ ��� ���������
�����
����������������������� ��������������������� ���� �
��
�
�
�C��� ���� ������ �� �������� '���� ���� �� �� �������� ��� ��� � � 1���� �� ��� %��
�� ���������C ������*��D/�$�
�
���� ��*�����(�������������������������������������������������������������������������������������������������������������������塊塊塊塊�������������������� �
>@����A"���������
� � � �
� ����"� +� 0���9%8���%�
� ����� +� ����9%8���%�
���C�����������������+�������9%8����%�
�=�������������"�������������� %�������� �� ������������������ �) �������$����
��'���� �����"�9����� ���"��������������������������� %$���
�
>�@� �����'�����������$*�9%8���%�>3�������������������� �3���@���������������������������控控控控��
�
>�@� /� %�������������� �� �����8�������"������������� ��������-��4�(4*$�
� �
� �>�@� ��������� %��������� ��������'��)����*$�� �
� � �
� >�@�����!������1�� ������������������������3����������%��������� %����� ���#��
�������� ��3����������������� �������$��
� � � �
� >@����'������'()�*�������� %�I�) ������� ���������� �#����"�8�����I���C������
�������������������������������?���������������������������"������ �������$���������������������������
�
�������������>%@���'�����"��������� ��� ������������ %#���������������������� ��� ���������
���������������������3�������� ��� ��"� ���&��� ��"���������C%� %$�(!���������������������������
������������������������������������ ������� ��������������������"� %�� ������������������$������������������������������
�����������
����������������������B������������������&������)�$��&����!�����������'��!���$$�������������
���������������������
����������4-�.���*&�����-���)���������������������������������������������������������������������������������塊塊塊塊��������������������������������
�
>@� - ��������������C���� %��� ������� ������� � ������� %����������"��
�(�G�8�������(��"�) ������� �'%� �"$��
��
��������������
���������������� �����������������������������������
������ ������������ ��� ���������
�����
����������������������� ��������������������� %��� �
��
�
�
�
>�@� ����� �������������%��� ����5����"�'���� ���(� ����������"�����������
���"�� ������� �%� �"$��
�
>�@� A�3����#��(�G� ����� �������� ���� ��%��� ��� ����� ����� ���� ������ �� ���������"�
���� ����� �3�����3����� ������ ����� ���������������� ���������"��
��������(�G�) ������� �D������ �$�
�
>�@� '��������� ���������� ���� ����� ���������� � �������� � ���������"��()�������
5'(����������"�����#�� ����������3����3��������"��(�G�� �3���� %$�
�
>�@� �(�G�8�������(��"�) ������� ����������C�8�3�� ������������3� %+�
�
�$������������������"�� ������� ������3�� ���� �������"��������"�8�����8���C���
�����"���������I��������������?������$�
�
��$� � ����� ���������"�� ������� �� �� � ��������� %����� ��������?�����
���� �������� �� ���"#� ����� ����C��������� �� ��� ���� �� ����� ������
����#�%� ����&#��%� �������3���#�3��%�#�������J�� �#���� ������������
����#�� �������"�8��� ���3�������C ���#�� ��� %���� ����������C ���#��
��������������� ��� $������� �� %��������������� ��� �����C�����������
����������������� �������������"��������������"�� ������� ��� %�3��������������
����������������������� ���$��' "�������� ����������������� ������ ��� ���� ��
���������������������� ������������J�����$�) ���������� ������� ���%��� �� ������
���������� #�'()�*��������%���� $�
�
���$� '��� ���������?�������������������C����������������������"$�
�
���� ��������������"��� ������� ������3�� ������������ �"����8���� ������(-)��
�>(�������� ������� ��� ������� @� �� ��� ���� ����� �� ��?� � ����"��
���������������������������������$�������� "�������� �����������������
��������� ����'()�*��������������������� #��������������������� �����"��
���� ������ ������� � ����� �� �� ��J������ �� ���� � �������� �����
������� � ����� ����� �� �����$� ���� ������ ���"� � ������� � ����� ��������
���������������� �� %�����(-)�� ������� $��
�
�$� ���� ������ ���"� � ������� � ����� �����3� ���� � 4������ 8� ���4��������
��
��������������
���������������� �����������������������������������
������ ������������ ��� ���������
�����
����������������������� ��������������������� )��� �
��
�� ������ �������� I� ��"����� ����� ����������� �� ��%� %�� �� �3�
������������������������$��
�
��$� '����������&���������)�6�����������������������"������()$�������������������������������������������������
�
�����������������������������4-�.���*-����&�������������'��!����$$�����������)���������������������������������
�
����������3895+3,31.6����������������������������������������������������������������������������������������������塊塊塊塊���������
)� ��������� � � ������������������ ��������� ������� %��������� ���� )�6#�������
� �������� �� �������� �"� ������ ���"� � ������� � ����� � �"� ��� ������ ��� )�6�
������$�- ��������������� %��������� � ������"������������� �/����)))4��
�� ) �� ��������6�%����� #����"��������� ����� �����% ����"��������) ������� �
'�������"� �������������������� %�3�������������$�
�
/�����0�����)������������������������������������������������������������������������������������������������������������������塊塊塊塊������������������������������������
�
������������!� ��������� � ����� ���� ������������� ���� ���� "����� %� 8�������"����������
��%�$�)������������������� �������"�������� ���������������C���������������$�
' "����� %������������C������� ���J�� ��#�%� ����� ������ %��"��������������
������������� ������� #����������������� ����J�����$�A�3������ �� �� %���������
��������������������� ���������������������#����������������������J������ ������� ��������������
�������������������������$������
�
������ ����$��������*����������$���������������������������������������������������������������������������塊塊塊塊�����������
- ��������3���������������������������������������������������� ���� %�����
������ ���� ��� � � �������� �� ������� � � ����� ��� 3���� �� ���� ����������
� ����� %�������������� ��� �������� � ���������"������������������ ��$�
�
� � �����������������������������"��� ������������3� %�� ������ +�
�
� � �$��������������� ������ �����$�
�
� � ��$����(����������������� � ������ ��� �$�
�
���$� -������������������������������� � ��$�
�
���������������$��A���8�����8������ �$�����������������������������������������������������������������������������������
�������
��
��������������
���������������� �����������������������������������
������ ������������ ��� ���������
�����
����������������������� ��������������������� ��� �
��
��������������������������������������$���6���������������������8���"����������$�������
�
�
���$���A"���������������������������������"#�������I����C������� ��������������
������������������������3���������������������������"��3��������$������
�
���$� )�� ������� ���C��������'()�*��$�
�
����������1��(�����������������������������������������������������������������������������������������������������������������塊塊塊塊��������������������������������
�
.������������������ �����3������������3� %��������+�
�
���$�����A���8����� �����$���������������
�
���������������$����-������'��-����������� � �����$�������������������
������������������������
����$�����()�8�)�6������ %$��������
�
���������������$������,��8������
�
����� �����������������������������������������������������������������������������������������������������������塊塊塊塊�
�
����������������������������������������� ��(�G�3��������� �"��������� ��% �� ��������
������������������� ����3������������3� %������� ��$�
�
���$����- ����������������������� ��� �������$�
� �
��$� ���������"�� ������� �������$�
�
���$������������"�� ������� �������� ���$�����������������������
�
��������������$���7��%� ��)�6������������ �/����)))4�����)�6��� ��% �� �$�������������������""""
�
������������������������� ������������(�G�3�������������� �� ��������� %�������J������
��� � ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� $������������������������������������������������������������������������������������������������������
�
� �
�
� �
�
��
�������������
����� ��� ��������������
����� ��������� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ��������������� ���� ����� �
��
�� ���������������������������� ���� ����� ��
���! ��"#�����$����� ����������%��� � � � � � � � ��
���� �������������������������������������������������������������������������������������������������������������������������壊壊壊壊�
����� ���������� � ������� ���� �������� ��������� ���� ������ �� ����� ���������
���� ���� � ������ ���� ������ � ��� � ���� ���� � �������!� ���� � ������ ����� ���
����" ��#�� �������� �������������������������� ����#��$���������������� �
��������������� !�
���
��� ���� ���������������������������������������������������������������������������������������������������������壊壊壊壊�
%&'�(����)�������������������
�
%&'�*+,��)�������' ������� �-������ "!�
�
���� ��������� �� ����������������������������������������������������������������������������������������������������壊壊壊壊�
'���� �)�������������� ������������������
��.�� )� ����� �������
� /�� "� )� �%��'���������0�
�
� 1 ��� )� �' ��"��� �2� "���/2��������� ���������
� � � �%��'���3(!*�
� �
� /���"��� � )� �4 ��������������� "������ �!�����������������������壊壊壊壊�
��������������������������������������������������������� ��� ������ � "���� ��� "����������������!�
����������������������������������������������������� &�������5� )� *��6"5���"�7��,�8�"!�������9�%��&���
� ���������������������������������*!��6"5���"�7�:���8�"!��9�%��'��3(�!�:� ���� ��� ������ !������"��#�$ �% � ��壊壊壊壊
& '( � �'� �)�*)�� �% �������� ������ ��������
+��,���-�
� ��� �'� .�)/�*. !������"��#�$ �% � ������
�� ��'�(0�� �&����*& ))
� )) )) ������*� ))
� )) )) �����./ ))
0(� � 0�� 0�'1 ��� 2(0�'1 ���0 0�� ��
��
��������!#���
����� ��� ������������������� ��������� ��� ���
������� �������� ���������������
�� �
�������� ���� ����� ������#�������� ���� "���� �
��
&��� 3�����4�� ��-����� ��
555555555555555555555555555555555555555555555555555555555555555555
(��%���������� 3�����4�� �� ����� ��
�64 ��� ���� 7 ��� ��
555555555555555555555555555555555555555555555555555555555555555555�
� � ��� � �������� � %��;%<�3(���!=������������������������� � � �����!���������������������������>���� ��!�*?��$!@�
� � � � � � � � �
� � �� ��� ������� %��;�%<�3(����!�=���
�
� � ������ �/��� "� ������3�?���!�������>������� "@�� ��������������� � �������������������������������������>A�� ������*�<��B*��A�@�
�������������������������������������������������������������������������������������>������� �����!:������ @�
� �
�������������=��"����� ��������>&�� 5���� 3�?����!�������5�%�3(���!�=���
� � 2��$����@� � C����3�?���!�A����� "��
� � �� !�����D ����3!(���
�
��� �����/� "�� /� �C���� 3�?���!�������5�%�3(���!�=���
� � >����C���5������� ���%�3�*�C����3�?���!�A���
� � C�����@� � �� "�C������ �����3!(�����
� � � � � � ����D ���!�
�
��D���������� "� � � 3�?���!�������>������� "@� ����������� � � � � � >A�� �����*���A��;� !@�
� � �
A ��=����� �� <���� "������������������%��;�%���,�5�%�3(�=���5����'�� ��
������������������������������������������������������������������������5�%��;�%�*�(���!(�<:�<3,����
� � � (*<:*<3�5'�3,(*�>��!�:��53�@�����
���������������������������� � � � �&'()*&+,-��&.-�/0,,12�&(,�.3+�� � � � &**,4+&'1,� � � �
� ��� ���������� � %��;��%<3+����!�B�
������������������������������������������������������������������������������������E/����������:!��>�(@F����������������������
� � ������������������������������������
�� �������� � � %��;��%<3+����!�B�5�%��B���!��
� � � � 5��%1�:3:��<��
������������������������������������������������������������������������������������E/����������:!��>�(@F����������������������
�
�� ���5��� ������� � � %��;�%�3+:���!��A��������������
�������������������������������������������������������������������������������������E/����������:!��>�(@F���������������������
��
��
��������!#���
����� ��� ������������������� ��������� ��� ���
������� �������� ���������������
�� �
�������� ���� ����� ������#�������� ���� ����� �
��
�;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;(��%���������� 3�����4�� �� ����� ��
�64 ��� ���� 7 ��� ��
555555555555555555555555555555555555555555555555555555555555555555��
�� �����D��� � %'�'<��:������"���#�
� � � � G�D��������������=�� ��C����
� � � � �����������%��������2�����!�
� �
��D���������� ����� ������������������������������B��%%/A�����$!�
�
�����&�D� "� /� �C����C���� ' �� ������������������%����������
� �������� �� � C�������������������� �� ������������������
�� �� ��
�
H�D�� � � %��;�%��3(���!�=���������������������������
� �
H�D��������� � � &����������� .�>=���"��@5�������������������
� � � ��</�����!�%��;��%�:�+���!�8���
� �
H�D������ � � %��;�%�3+:���!��A�
� � � � E/�����������:!��>�(�@F����������������������������
����������������������������������3"��#� �������4�#8�"������������ �����壊壊壊壊
������ �� ������������3!� ���� ��� � �� "��� ���� ������� ������� ��� �*�� A��;� ����� C���� � *�� A��
�� ���������� �������C�� �������� � ��"�������������!�
� �
� �! 2� "�������������� �� �����5������� ������������� �������;;�<�&<(
�!������� "��������� ��������%��'���3(!*
� � �:!���������3:�� ������������������������C����������"��������� "����� ���#�������������
������������������������������� ��C����������������� �������!�
�
��������������*!��%�������������������������������������� ������&�<�&<(>�%�1<�@� ����� ��
�� ����C�����D������������� ����������%���� ������ ����������������:���
��"!������ "��� ���������D ������(��82�!�=��������������� �����������
�� ���� ������� ����'�/������!��
�
(!� ����� "���������� ��������5������������������&�I���� �������������� �����
����������������%1<�<�*(�#�/��!)�����������������������������������������������������������������������
��
��������!#���
����� ��� ������������������� ��������� ��� ���
������� �������� ���������������
�� �
�������� ���� ����� ������#�������� ���� 5���� �
��
��� ���� �#�
� @��A ���������
� � � �
� ��� ������������)��BB�6"5���"�
�
���������������������� ���)���*B�6"5���"�
� � ��D���������)���*B�6"5���"���������� � �
=���������������A ��������������� "���������� �� ���������������������� ���
' �������!��%���� ����� �6����� ��� ��������������������������� "!�
� ������������������ � �
�@������������������*!*�D"5���"�C��������������� ��������� �����������������������
���� "������� !���������������������������������������������������������������������������������������������������������
� �>�@����%������%&'�*+,������ "�-�' ������� ���������� �#���� �5�����-���D������
������������������������������������������� ������������ ��������������������������������壊壊壊壊��
�������������>�@���%����� ��������� ��� ������������ "#���������������������� ��� ���������
����������������������C�������� ��� �� � ���$��� �� ���������D"� "!�&����������������������������
������������������������������������� ������� �������������������� � "�� ������������������!����壊壊壊壊��������������������������
�����������
����������������������9������� ��4��������"�����8�7�"����%��������:� %���77�壊壊壊壊
����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
��;����������'�3<-�" ������8������� ��壊壊壊壊�
�
>@� ; ��������������D���� "��� ������� ������� � ������� "���������� ��
�&�I�5�������&�� �' ������� �%"� � !��
�
>�@� ����� �������������"�������J���� �%���� ���&� ���������� �����������
��� �� ������� �"� � !��
�
>�@� A�C����#��&�I� ����� �������� ���� ��"��� �������� ��������� �������� ��������� �
���� ����� �C�����C����� ������ ����� ���������������� ��������� ��
��������&�I�' ������� �8������ �!�
�
>�@� %��������� ���������� ���� ��������������� � �������� � ��������� ��&'�������
J%&���������� �����#�� ����������C����C�������� ��&�I�� �C���� "!�
�
�
�
��
��������!#���
����� ��� ������������������� ��������� ��� ���
������� �������� ���������������
�� �
�������� ���� ����� ������#�������� ���� ����� �
��
�
>�@� �&�I�5�������&�� �' ������� ����������D�5�C�� ������������C� ")�
�
�!� 4 �� ��������� "�3�?���������� �-��� ���������������D����������
����� ������� "!��
�
��!� ���� ������ ��� � � ������� � ����� C�� ���� �� ����� � ���� ��� � 5� ���� 5�
��D�������� ���������-�����������3��?������!�
�
���!� ������������� �� ������� �� ��� ��������� "����� ��������?�����
�������������� ��� #����������D��������� ��������� ������� ������
����#�"� ����$#�"� ������C���#�C��"�#�������G�� �#���� �����������
����#��������� �5��� ���C��� ����D ���#�� �����D����������� �������#�
���D��� �� �������� � �� �� ����� C��� ����D ���#� ��� ��� ���
���� ��� !��
�
��!� ����� �� "������������ ��� �����D������������������ ������������� �
���� ������ ��� � � ������� � �� "� C���� ���� �������� ������� ���!� � % �
������� ����������������� ������ ��� ���� ���������������� ����������
��G�����!� ' ����� ����� ������� ���"��� � � � ��������������� #�%&'�(���
�����"���� !�
�
�!� %��� �������*�?�������������������D���������������������� !�
�
��!� ������ � �������� �� �������� � � ������ ��� � � ������� � ����� � � � ���
���������'�/�������!��
�
����� �������������� ��� ������� ������C�� ������������ � ����5���� ������&;'��
>&�������� ������� ��� ������� @� �� ��� ���� ����� �� 3�?� � ���� �
���������������������������������!�������� �������� ����������������
��������� ����%&'�(������ ����� ���������� #���� ���������� ������� ����
� � ����������������� ������ �� ����G������ ������� �������������
�������������������������!�
�
����!� ���� ������ ��� � � ������� � ����� �����C� ���� � ������ 5� �����������
�� ������ � �������� -� �� ����� ����� ����������� �� ��"� "�� �� �C�
������������������������!��
�
�
�
��
��������!#���
����� ��� ������������������� ��������� ��� ���
������� �������� ���������������
�� �
�������� ���� ����� ������#�������� ���� !���� �
��
�
�$!� %����������$���������'�/����������������������� ������&'!������
�
����������������������
�����������������������������'�3<-����"��������:� %���774������8� ��4��������
�
/��=4�� �8����������������������������������������������������������������������������������������������������������������昂昂昂昂������
�
�������������� ���������� ��������� ��������������������� ����� "�5������� ����������
��"�!�'������������������� ������� �������� ���������������D���������������!�
% ����� "������������D������� ���G�� ��#�"� ����� ������ "�� ��������������
������������� ������� #����������������� ����G�����!�A�C������ �� �� "���������
������������������� � � � � ���� ����������� � ���#� ���� ������ � ����� ��� ��G������ �� ����� ��������
�������������������������������!������
�
6�#��� ���47���4��������3��� 7 ������� �; ��������C���������������������������������������������������� ���� "�����
������ ���� ��� � � �������� �� ������� � � ����� ��� C���� �� ���� ����������
� ����� "�������������� ��� �������� � ��������� ������������������ ��!�
�
� � ����������������������������� ��� ������������C� "�� ������ )�
�
� � �!��������������� ������ �����!�
�
� � ��!����&����������������� � ������ ��� �!�
�
� � ���!���;������������������������������� � ��!�
�
���������������!��A���5�����5������ �!����������������������������������������������������������������������������������壊壊壊壊�
�������
��������������������������������������!���/���������������������5��� ����������!����������������������������������������������������壊壊壊壊""""�
� ��!���A ��������������������������������� #�������-����D������� ��������������
������������������������C��������������������������� ��C��������!����������������������������������
� �
���!��'�� ������� ���D��������%&'�(��!�
�
*�����> �#�����������������������������������������������������������������������������������������������������������壊壊壊壊�
�
1������������������ �����C������������C� "��������)�
�!� A���5����� �����!������
�
��
��������!#���
����� ��� ������������������� ��������� ��� ���
������� �������� ���������������
�� �
�������� ���� ����� ������#�������� ���� ���� �
��
����������
��!� �;������%��;����������� � �����!�������������������
�
���!� �&'�5�'�/������ "!��������
�
��!� ��.��5������
�
������ ����� ����������������������������������������������������������������������������������������������������壊壊壊壊
���������������� ������ ����� ��� ��������� � � �&�I� C�������� � � � �� ���� �� ��" �� �� ���
����� ����C������������C� "������� ��!�
�
�!����; ����������������������� ��� �������!�
� �
��!������������� �� ������� �������!�
�
���!������������ �� ������� �������� ���!��������������������
����
��������������!���4��"� ��'�/������������ �2����'''<�����'�/��� ��" �� �!�������������������壊壊壊壊""""
�
������������������������� ������������&�I�C�������������� �� ��������� "�������G������
��� � ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� !�����������������������������������������������������������������������������������������������������壊壊壊壊�
�
� �
�
�
�
��
������������
�>�� � � ��� A�� � ����������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������ ����� ����� �
��
���������������������� ������ �������� ������������������������������ �����������
� � � ��
���� �!"#$��������������������������������������������������������������������������������������������������������������������昂昂昂昂�
�
��������������� ����������������������������� ����������� �����������������
���� ���� � !����� "��� #����� � ��� � ���� ���� � �������$� � ���� � ������ ����� ���
����% ��&�� �������� �������������������������� ����&��'���������������� �
��������������� $�
���
($�� ##%&!'(%$��)'*+',+��������������������������������������������������������������������������������������������昂昂昂昂�
�
�)*�+����,��!�����"���#������
�
�)*�-./��,��#����* ������� �0������ %$�
�
���� �)$-���$.!,&#)&"*��������������������������������������������������������������������������������������������������昂昂昂昂�
�
*���� ,� ���� ����� � �!�����"��� �#����&��������� ����1� ��
�2�&����� %������ ����������� ��$�
�
�
!�3��
�
4�� %�
�
5���% �!� ����
,�
�
,�
�
,�
�
�������� ������$�
�
��!*�����������
�
�)*�+���
�
�
6 ��� ,� * ��%��� � 7� %��� 47� �������� �� ���� ��� ��!*�����
���+$-�
�
�
4���%��� � ,� ��8���������������������������� %���������������
����������� ��� ������ � %� � ��� ��� %�����������
������������� %����� �� ������������ %����� �$$�
�
�
)�������9�
�����������
,� -($/��:%9��(%��;���/�
���$���<�����������
�-$.��:%9��(%��;��=(>�
���$�<�����!*�����+$�=������解解解解�
�
�
�� �/��� �0�� ����1��1� �",-')�!2'*3$�4�$5&.&"*��昂昂昂昂�
1� �//� ���� �6��1�77� �",-')�!2'*3$�4�$5&.&"*��攻攻攻攻�
�� ��� �� ������7�� ��
�� ��� ���� 1�����6 � ��
��� � � ����� ���� ����� �� � �/��
�
�
��
������������
�>�� � � ��� A�� � ����������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������ ����� 1���� �
��
�8��� �"*.),9!)&"*�:��')$,&'%�
�
�'%5$�!"-#"*$*)�
�
�"*.),9!)&"*��
$;9&,$+�
�
�')$,&'%��#$!&<&!')&"*� �
�
��� �
�
�
�������� �!�����
�
�!�?��@(�>���"�$��-�
�
�� ���
�
������� �!�?��@(�>��"�$��-� �
!���� �� @4��� %� ��8�����!�����A������� %B���
AC�� ����(���C���?� $B��
�
�
D��%��� !������A)�� 9��
7��'����B�
��8�����!�����9��@(�>�"�$��-����
����1������8�����������������
A�?� $�����2 �����$+���B��
攻攻攻攻�
�
��� �!����
4� %��
4� �1�����
A!���1��9�
!���1�����B�
�
��8������!����9��@(�>�"�$��-�
����1������8�������������A�
?� $�����2 �����$+����B����������������
攻攻攻攻�
C ��D����� �� @���� %� �!�?�����/� 9��!�?���(�+�
"�$�D��9�!"�*�� �9��!�?���
-�+�"�$�+�@=�@�/����+-@=-@�(�9�
*!��/+-� A"�$�=��9��(B9�7��%����
����������������������
�
�'(,&!')$+� �'*+� =2$$%.� ',$�
*")���'!!$#)'(%$��
� � � �
攻攻攻攻�
�� ��� 9� "� ��
������
� �!�?���@�.���"�$���>�
�
�
�
�� ��� 9� "� ��
�����
� �!�?���@�.=��"�$��(C�
�
�
�
�� ����"�2����
�
�
!�����D�� �� !!@��=�1�����������������
���������7�����$��
�
��2�!����
�����
� ��8������!�����
A�C�� �����(-��C��?� $�B��
�
�
!����)�2� %� 4� �1����1�����
�������� �� ��
������
�
* �� ��� ������� "�������
��������� 1���� ��������
�������� �� ����������������
�
攻攻攻攻�
�
�
��
������������
�>�� � � ��� A�� � ����������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������ ����� ����� �
��
�
�'%5$�!"-#"*$*)�
�
�"*.),9!)&"*��
$;9&,$+�
�
�')$,&'%��#$!&<&!')&"*� �
�
E�2��
� �
�!�?���@(�>��"�$��-�
�
�再�
E�2��!������ � )����������� 3��AD���%��B�9��
��@4�����$��!�?� ��@=�.� �"�$�
5(�
�
再�
� ����������E�2������������������������������������������������������������������������!�?��@�.=�"�$�(C�
�
����������������������������������2'*3$�&*�-$)'%%9,3>�.2'%%�*")�($�#$,-&))$+������������������������������������昂昂昂昂�
�� �$� ��� ����� �� %� ��1��%�������������� ������(-��C���� �����1�����-��
C���� ���������� ����� ���� �������1�� �������� ������� %� ������1��%��
����������$�
� �
������������($� 7� %�� ��� ����� ���� �� �� ����� ������� � �� ���� � ���� ����� ��� �(-� ��� (���
������� �������4C$� � �
�
� �$� !������ %��������������������������� ����������!*����+$-��
�
������������=$� #������=�� ������������������������1����������%���������� ���������� ��
1����������������� �������$�
�
������������-$������������������������������������������!� ����!!)�@!)@+A���6@�B� ����� ��
�� ����1�����2������� ������ ��������������� ������ �� �������������=���
��%$������ %��� ���������2 ������+��57�$�D��������������� �����������
�� ���� ������� ���*�4������$�
�
+$�� ����� %���������� ��������9������������������)�F���� �������������� �����
�����������������6@!@�-+���4��$�(�����������������������������������������������������������������������昂昂昂昂�
�
�
���� �$.)&*3�
�
AB� �����>+,".)')&!� ����������������������������������������������������������������������������������������������攻攻攻攻�
�
� ���� � �������,� >/��:%9��(%�
� �!��� �������,� ->��:%9��(%�
� ���2����������,� ->��:%9��(%�
�
�
�
�
��
������������
�>�� � � ��� A�� � ����������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������ ����� 8���� �
��
�
A�B� !��������������-$+�:%9��(%��1��������������� ��������� ����������������������
���� %������� $������������������������������������������������������������������������������������������������攻攻攻攻�
�
� D������������C �������������� %�������� �� ������������������ �* �������$��
���� ����� �:����� ��� �������������������������� %$�
�
� A�B������������)*�-./������ %�0�* ������� ���������� �&���� �9�!���0���2�!����
�������������������������������8��������������������������� ������ �������$������������������������昂昂昂昂�
�
�������������A�B��������� ��������� ��� ������������ %&���������������������� ��� ���������
����������������������1�������� ��� �� � ���'��� �� ���������2%� %$�)#���������������������������
������������������������������������� ������� �������������������� � %�� ������������������$����昂昂昂昂��������������������������
�����������
�����������������������*+$,�*"�!&,!9-.)'*!$�.2'%%�'*>�"<�)2$�'("5$�)$.).�($�='&5$+�"<<������������昂昂昂昂�
����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
������������������:��2&,+���',)>���*.#$!)&"*��������������������������������������������������������������������������昂昂昂昂�
�
AB� ? ��������������2���� %��� ������� ������� � ������� %���������� ��
�)�F�9�������)�� �* ������� ��%� � $��
�
A�B� ����� �������������%�������G���� ������ ���)� ���������� �����������
��� �� ������� �%� � $��
�
A�B� C�1����&��)�F� ����� �������� ���� ��%��� �������� ��������� �������� ��������� �
���� ����� �1�����1����� ������ ����� ���������������� ��������� ��
��������)�F�* ������� �5������ �$�
�
A�B� ���������� ���������� ���� ��������������� � �������� � ��������� ��)*�������
G�)���������� �����&�� ����������1����1�������� ��)�F�� �1���� %$�
�
A�B� �)�F�9�������)�� �* ������� ����������2�9�1�� ������������1� %,�
�
�$� H �� ��������� %���8���������� �0��� ���������������2����������
����� ������� %$��
�
��$� ���� ������ ��� � � ������� � ����� 1�� ���� �� ����� � ���� ��� � 9� !��� 9�
��2���!���� ���������0��������������8������$�
�
�
�
�
��
������������
�>�� � � ��� A�� � ����������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������ ����� ����� �
��
�
���$� ������������� �� ������� �� ��� ��������� %����� ������(�8�����
�������������� ��� &����������2��������� ��������� ������� ������
����&�%� ����'&�%� ������1���&�1��%�&�������I�� �&���� �����������
����&��������� �9��� ���1�������2 ���&�� �����2����������� �������&�
���2��� �� �������� � �� �� ����� 1��� ����2 ���&� ��� ��� ���
���� ��� $��
�
��$� ����� �� %������������ ��� �����2������������������ ������������� �
���� ������ ��� � � ������� � �� %� 1���� ���� �������� ������� ���$� � � �
������� ����������������� ������ ��� ���� ���������������� �����������
��I�����$� * ����� ����� ������� ���%��� � � � ��������������� &��)*�+���
�����%���� $�
�
�$� ���� �������-�8�������������������2���������������������� $�
�
��$� #����� � �������� �� �������� � � ������ ��� � � ������� � ����� � � � ���
���������*�4�������$��
�
���$� �������������� ��� ������� ������1�� ������������ � ����9���� ������)?*��
A)�������� ������� ��� ������� B� �� ��� ���� ����� �� ��8� � ���� �
���������������������������������$�!������ �������� ����������������
��������� �����)*�+������ ����� ���������� &���� ���������� ������� ����
� � ����������������� ������ �� ����I������ ������� �������������
�������������������������$�
�
����$� ���� ������ ��� � � ������� � ����� �����1� ���� � ������ 9� �����������
�� ������ � �������� 0� �� ����� ����� ����������� �� ��%� %�� �� �1�
������������������������$���
�'$� �����������'���������*�4����������������������� ������)*$������
�
����������������������
����������������������������������:������.2'%%��*")��($��='&5$+��"<<��9*+$,��'*>��!&,!9-.)'*!$����������������������
�
�
�
�
�
�
�
�
��
������������
�>�� � � ��� A�� � ����������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������ ����� ����� �
��
�
��������?9'%&)>����������������������������������������������������������������������������������������������������������������昂昂昂昂������
�
������������#� ���������� ��������� ��������������������� ����� %�9������� ����������
��%�$�*������������������� ������� �������� ���������������2���������������$�
� ����� %������������2������� ���I�� ��&�%� ����� ������ %�� ��������������
������������� ������� &����������������� ����I�����$�C�1������ �� �� %���������
������������������� � � � � ���� ����������� � ���&� ���� ������ � ����� ��� ��I������ �� ����� ��������
�������������������������������$������
�
6����� �'*9<'!)9,$,.���$.)���$,)&<&!')$��
� �? ��������1���������������������������������������������������� ���� %�����
������ ���� ��� � � �������� �� ������� � � ����� ��� 1���� �� ���� ����������
� ����� %�������������� ��� �������� � ��������� ������������������ ��$�
�
� � ����������������������������� ��� ������������1� %�� ������ ,�
�
� � �$��������������� ������ �����$�
�
� � ��$����)����������������� � ������ ��� �$�
�
� � ���$���?������������������������������� � ��$�
�
���������������$��C���9�����9������ �$����������������������������������������������������������������������������������昂昂昂昂�
�������
��������������������������������������$���4���������������������9��� ����������$����������������������������������������������������昂昂昂昂""""�
� ��$���C ��������������������������������� &�������0����2������� ��������������
������������������������1��������������������������� ��1��������$����������������������������������
� �
���$��*�� ������� ���2���������)*�+��$���������������������������������������������������������
�
7����������',@&*3�����������������������������������������������������������������������������������������������������������昂昂昂昂�
�
6������������������ �����1������������1� %��������,�
����$�����C���9����� �����$���������������
�
��$� �?�������!�?����������� � �����$�������������������
�
���$� �)*�9�*�4������ %$��������
�
�
�
��
������������
�>�� � � ��� A�� � ����������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������ ����� ���� �
��
�
��������������$����!�3��9������
�
������ �')$,&'%�!!$#)'*!$����������������������������������������������������������������������������������������昂昂昂昂�
���������������� ������ ����� ��� ��������� � � �)�F� 1�������� � � � �� ���� �� ��% �� �� ���
����� ����1������������1� %������� ��$�
�
�$����? ����������������������� ��� �������$�
� �
��$������������� �� ������� �������$�
�
���$������������ �� ������� �������� ���$��������������������
����
��������������$���H��%� ��*�4������������ �7����***@�����*�4��� ��% �� �$�������������������""""
�
������������������������� ������������)�F�1�������������� �� ��������� %�������I������
��� � ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� $������������������������������������������������������������������������������������������������������
�
�
��
�����������
�
���������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ������������������������ ������
��
������������������� �������������������� ������������
�������������������������������������
� � � � � �
���� �������������������������������������������������������������������������������������������������������������������������������解解解解������������������������������
�
��������������� ������������������������������ �������������������������������
��� ��������������� ���������!������"� #�����#� ������ ��������$����������������
"������� ��#�� �������� ��������������������"����� ����#��%���������������
"!���������������� $��
�
���������� !�"# ���$"%&"'&�������������������������������������������������������������������������������������������������解解解解��������������������
�
���������&'(�)�*�+����������#����"��,�����-� ����������.���/'��0�� ��������$�
�
���������&'(�12��+�� ����( ������� �,������ �$�
�
����(������$�)���*�'!�$!�%� �������������������������������������������������������������������������������������������������解解解解��
� (���� +���������������� ��������������� ����#�������������3� ���
������������������������������������������������������!�-��3�������� ������� ��"������"� ��$�
� �
� ��.�� +� �����������/'��
� �
� 4�� �� +� &/�(�������������
�
������������5 ��� +� ( ��� ��!������������&/�(�6��$*�$��7/'�8�9�
���������������������������������������������������������-����3��������&/�(��6��)$������$����
� � � �
� '��������9��������������������+� �:1$*���;�9��*����<��:�
������������=��&������
� ����������� � >2$1�����;�9��*���<��:22
���� =��&'(�)�*������������������控控控控�
�
+��� ��%*$',�$!�%�-�."$�'!" �
�
��" /���
��)��%�%$�
��%*$',�$!�%��
��0,!'�&�
."$�'!" �����!1!�"$!�%�
6��!� ������� &��?��&@��*��@���:�)�
� �
�� �2� � �3.�� ��������� � !"#$�%&#'()�*��)+,-, '��解解解解� '
�� �����������22���������������
�������������������
�4��
���������������������5��566� ��')"$���7"%8��9���/!*!�%��控控控控�
�� 55� ��2� ��5�(56(� �
����� ���������4:� ��������4:� ����� ��.��2��
�
�
�
�
��
�����������
�
���������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ������������������������ ������
��
�
��" /���
��)��%�%$�
��%*$',�$!�%��
��0,!'�&�
."$�'!" �����!1!�"$!�%�
�� �
6� ��� 6������ &��?��&@��*��@���:�)�
�
����� 4��� �� &��?��&@��*��@���:�)�
�
A����� ������ &(�(�:�)�
�
6��!�����4� �� 4� �3"���7����3���9�
����3�����8����( ������
�
&(�(�:�)�
�
�
B ��A����� 4��� �� ?���"��� (�� � &��?� &� ::�� 9�
&��?� &� *�)� A�6� 9� �������
������&���1�9�C�������(�� �&��?�
&�1:)�9�(����)1����$�0���9��*�
�
�"#'!�"$�&� � 7"%&� ;7�� *� "'��
%�$��"����$"# ��
�
�
控控控控�
6� ���9��� ���6����� &��?��&@�2:���$6>�
�
�
6� ��9�� ��/����
�
� &��?�&��20���$�*B�
�
�
6� �����-����
&(�(� :�0� ������ A�� �� 3����
�������������"������������$�
�
�
�����'�-� �� 4� �3"���3���������
���� �� ��������
�
���� �&�"������9��������� �
D�-�� � &��?��&���*�E����:�)�������������控控控控� �
�
D�-���������
� �
'��������"�� .��73������8�9��
/�$�4������&��?�&@0:2����$�C*�
�
D�-��/��� � &(�(��:�)�
�
�
�������������7"%8��!%�)�$" ,'8<�*7" �%�$�#����')!$$�&�,% �**�)�%$!�%�&�!%�$7��������
�
�$� 6��!������� �� ��3���������������� �������� �������*1��B6�3�����1���
���������B6��� ���������� ������� ����"��3�� ����������� �� ������3������������
���������������$�
�
*$� &����������������"�����-����9����������������&��?�&�:��$�
�
�
��
�����������
�
���������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ������������������������ ������
��
�
�
� � :$� &��� ��� ����� ��� "�� �� ���� 3���� �3�� ����� �� 4F�� 9� G� �� '�������� �������
����3���"!��3���������&���� ������ �$�
� �
=��� ��*$!%8������������������������������������������������������������������������������������������������������������������解解解解�� �
78� �B!���������
� � � �
� 6��!� +� *����;�9��*��
� ���� +� �11��;�9��*��
6�-�����������������+�����11�;�9���*��
A���� ����� ��� �!��������� ����� �� ����� �� �� � � ����"��� �������� � ( ��"����$��
&���� �����!�;����� ���!�"������������������������� �$���
�
7"8������&�����������1$)��;�9��*��73�������������������� �3���8����������������控控控控��
�
7�8����&������&'(�12������� ��,�( ������� ���������� �#�6��!�9�����,�6�-������
������������������������������������������� ������������ ���������������������������������������������
�������������7�8���&�����!��������� ��� ������������ �#����������������"����� ��� ���������
���������������������3�������� ��� ��!� ���%��� ��!�"�������-�� �$�' ���������������������������
���������������������"�������������� �"����� ��������������������!� ��� ������������������$������������������������������
�����������
����������������������>%&�'�%���!'�,)*$"%���*7" �"%<��1�$7��"#�/��$�*$*�#��;"!/�&��11�������������
���������������������
��?����������4����-��7!'&���"'$<���%*���$!�%�����������������������������������������������������������������������解解解解��������������������������������
�
78� ? ��������������-���� ���� ������� ������� � ������� ����������"!��
6'�F�9�������'��!�( ������� �&�� �!$��
�
7"8� ����� ����������������� ����H����!�&���� ���'� ���������"!�����������
���!�� ������� ��� �!$��
�
7�8� B�3����#�6'�F� ����� �������� ���� ������ ��� ����� ����� ���� ������ �� ���������!�
���� ����� �3�����3����� ������ ����� ���������������� ��������"!��
�������6'�F�( ������� �C������ �$�
�
7�8� &��������� ���������� ���� ����� ���������� � �����"�� � ��������"!��'(�������
H&'���������"!�����#�� ����������3����3�������"!�6'�F�� �3���� �$�
�
�
��
�����������
�
���������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ������������������������ .�����
��
�
�
7�8� 6'�F�9�������'��!�( ������� ����������-�9�3�� ������������3� �+�
�
�$������������������!�� ������� ������3�� ���� �������!�����6��!�9�����9�6�-���
�����!���������,��������������I������$�
���������
��$� � ����� ���������!�� ������� �� �� � ��������� ������ ������*�I�����
���� �������� �� ���!#� ����� ����-��������� �� ��� ���� �� ����� ������
����#��� ��"�%#� �� �� ����3���#�3����#� ������ J�� �#� ��� ������ ����
����#� � ����"��!� 9� "� ���3��� ����- ���#� � �����-����������� �������#�
���-��� ����������� ���� �����3�������- ���#�������������� ��� $�
����� �� ����� �������� ��� �����-������"����������� ����"�������"!�
���� ������ ���!� � ������� � �� �� 3���� ���� �������� ������� ���$� � & !�
������� � ��� �������� ����� ������ ��� ��� � � ��������������� � ������"��
��J�����$� ( � ���� ����� ���� ��� ��� ���� � � � ��������������� #� &'(� )�*�
���������� $�
�
���$� &��� �������1�I������������"������-�����������������"����!$�
�
��$� � ����� � �������� �� �������� "!� ������ ���!� � ������� � ����� � �!� "��
���������(64�������$��
�
��� ���������������!��� ������� ������3�� ������������ �!����9���� ������'?(��
�7'�������� ������� ��� ������� 8� �� ��� ���� ����� �� ��I� � ����!��
���������������������������������$�������� !�������� �����������������
��������� ����&'(�)�*������������������� #��������������������� ����"!��
���� ������ ������� � ����� �� �� ��J������ �� ���� � �������� �����
��"���� � ����� "���� �� �����$����� ������ ���!� � ������� � ����� ��"�����
���������������� �� ���� �'?(�� ������� �$��
�
��$� ����� ������ ���!� � ������� � ����� �����3� ���� � @������ 9� ���@��������
�� ������ �������� ,� ��!����� ����� ����������� �� ���� ��� �� �3�
������������������������$��
�
���$� �&����������%���������(64������������"���������"!������'($��������������������������������������������������
�
�����������������������������4����-������*7" ��%�$��#���;"!/�&���11��,%&�'��"%<���!'�,)*$"%������������������������
�
�
�
��
�����������
�
���������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ������������������������ ������
��
���
@��������A," !$<�����������������������������������������������������������������������������������������������������������������������解解解解�������������������������������
�
������������ � ��������� � ����� ���� ������������� ���� ���� !����� �� 9�����"�!����������
����$�(�������"����������� ��"����!�������� ���������������-���������������$�
& !����� �������������-�����"� ���J�� ��#��� ����� ������ ���!��������������
������"������ ������� #����������������� ����J�����$�B�3������ �� �� ���������
��������� ���������������������#�����������������"����J������ ������� ��������������
�������������������������$������
�
/�0��� ."%,1"�$,'�'*����*$����'$!1!�"$��������������������������������������������������������������������������解解解解����������
? ��������3�����������������������������"���������������������� ���� ������
������ ���� "�� � � �������� �� ������� � � ����� ��� 3���� �� ���� ����������
� ����� ��������������� ��� �������� � ���������!������������������ ��$�
�
� � �����������������������������!��� ������������3� ��� ������ +�
�
� � �$��������������� ��"��� �����$�
�
� � ��$����'����������������� � ������ ��� �$�
�
���$� ?������������������������������� � ��$�
�
���������������$��B���9�����9�"���� �$�����������������������������������������������������������������������������������
�������
��������������������������������������$���4���������������������9���!����������$�������
�
��$���B!������������������������������"��!#�������,��"�-������� ��������������
������������������������3���������������������������!��3��������$������
�
��$� (�� ������� ���-��������&'(�)�*$���������������������������������������������������������
�
6���������."'B!%8�������������������������������������������������������������������������������������������������������������������解解解解��������������������������������
5�������������"���� �����3������������3� ���������+�
�
���$�����B���9����� ��"��$���������������
�
���������������$����?������&��?����������� � ��"��$�������������������
�
�
��
�����������
�
���������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ������������������������ ������
��
������������������������
�
�
�
����$�����'(�9�(64������ �$��������
�
���������������$������.��9������
�
������ ."$�'!" ������$"%������������������������������������������������������������������������������������������������解解解解�
�
���������������� ������ ����� "�� ��������� � � 6'�F� 3�������� � �!� �� ���� �� ��� �� �� ���
����� ����3������������3� �������� ��$�
�
�$����? ����������������������� ��� ���"���$�
� �
��$� ���������!�� ������� �������$�
�
���$������������!�� ������� �������� ���$�����������������������
�
��������������$���K���� ��(64������������ ������(((@�����(64��� ��� �� �$�������������������""""
�
������������������������� �����������6'�F�3�������������� �� ��������� ��"����"J������
��� � ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� $������������������������������������������������������������������������������������������������������
�
� �
�
� �
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ��������##����������������� ������
��
������������������� ����������������� ������������
� � � � ����������������������������
�
�
� � � � � �
���� ������������������������������������������������������������������������������������������������������������������晃晃晃晃�
�
��������������� ����������������������������� ���������������������������������
���� � �����!�����"����������#�������� $�����%�����������$��������������������
����� ��%�� �������� �������������������������� ����%��&����������������#�
��������������� $�
�
��� ���!"�#$!���%#&'#('�������������������������������������������������������������������������������������晃晃晃晃�
�
� ��'(')�*������������#�� �+��, -��'./�0��1�� �����!��%�!�����2�����3����������
�������������������������������������������������������������������������������������$�
�
45,�/�)��1�� �����!��%�!�����2�����3�"����������6����5 �7�� ��������$�
�
45,�'8���1��"����, ������� �2������ �$�
�
4� ,����$)�$��
�
4� ,����/$���
�
)��� �%�*����+�("�%"�&������������������������������������������������������������������������������������������晃晃晃晃�
�
,����������������������1��������������� �� ������!������"������ � �
�
� �6�������������������1���������������$�
� �
������������+ ������������������1���, ��� ��#������������4� ,������$)�$��*�5�09������������������昂昂昂昂�
������������������������������������������ ��3����:�������4� ,����/$��� ��$���������������������������������������
� �
� ;�� ��������������1���4� ,���������� �
�������������
,� ��-����&� .�%#� ��/�0���#�� �1��,�� � ��(*#%��2#&3��4���5"+"�&�晃晃晃晃�
)� �--� ���� 6����6�� ��(*#%��2#&3��4���5"+"�&�昂昂昂昂�
� 77� 77� 8��,�6 � �
�� ���� 77� ������6�� ��������7�
�� 77�� ��-� ����1�6�� ��������7�
����� ����������9� ���������9� ����� ��0��-��
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ��������##����������������� �����
��
�
������������;�������#������1����������������
� �
� ���������������������1��<#������� �*=�����%�"�����2�!�0%�5� ��2�5�������4��%�
������� ���%� ������� %� ���#��� �� "����� ��� � �� �����%�
����9������������:����*,�;0$������������������������������������������昂昂昂昂�
������������������������ � � � � � � � � � �
������� 5�������9�����������1����(/$)�>�9��)����)�����$���$����?��4�������� @'(')����
� ������������������������$��>�9��)����7������$���$��?������������������������������������������昂昂昂昂�
� � �
,��� ��&+%(.�%"�&��0#%�("#!��������������������������������������������������������������������������������������晃晃晃晃�
:::::::::::::::::::::::::::::::::::::::::::::::::::������������::::::::::::�
������#!5��� � ��&+%(.�%"�&���������������0#%�("#!�������";"�#%"�&�
��������*��&�&%� � ��<."(�'��� � �
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::�
�
� � � ����#� � ������� �4 �A��4@��'�*���������0%�
� � � � ���������������������������������� ���$)'B��&$�
�
��������������������� ��� � ������� �������������������4 �A�4@��'�*���������0�
� � �
� � � � ���� � ;��� �� ���������(B���$� �����*������� �0���昂昂昂昂�
� � � � � � ��������*<�� ����)���<��A� $0��
�
� �����������������C����������������� 5���� ���������(B���$� �����������������������������昂昂昂昂�
� � � � � � �
� �������������������#� ���;� �� � ;� �:���� ���������(B���$� ����������������������������昂昂昂昂�
� � � *����:���9�����
����������������������������������������������������:�����0�
�
�� �����������������< �:����� ������;��� ��������������� ��������A��������,�� ��4 �A��4�((��9��������
� �����������������������������������������������������������������������������������������4 �A��4@)�/�D���9� ������������������
��������������������������������������������������������������������������������������������4����'�9�C��������,�� ��4 �A��4������
��������������������������������������������������������������������������������������������'(/�9�, ���/'��!�$�7��9�)�
��������������������������������������������������������������������������������������#$("�#%�'�=#&'>2��!+�#(��&�%��
� � � � ��������#����%#$!��� �
�
� ����������������� ���9�!� ������������� ��������4 �A��4@�8(��!��$�.�
� � � � �
� ����������������� ���9�!� ������� � ��������4 �A��4@�87�!�$�)<�
�
� �
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ��������##����������������� ������
��
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;������������;;;;;;;;;;;;�������#!5��� � ��&+%(.�%"�&���������������0#%�("#!�������";"�#%"�&�
��������*��&�&%� � ��<."(�'��� � �
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::�
�
���������������� �����!�3��� � � �������4, ,@(�7�E�3�������� ������
�������������������������������������������������������������������������������������D�� ���:���������������
� � � � ��������4��������������$�
�
� ����������� ����5�3� �� �����;� �:����:���� ��������!�������*������������ ���
� � ������������� �� �� ����������������0�:��������������������昂昂昂昂�
� � ������������ ��������������� �� �������$����
� � �
� �����������F�3�� � � ��������4 �A�4����'�*���������0%��昂昂昂昂�
� � � � � � ������������ ��$)'B��&$�
�
� �����������F�3�� ������ � � ��������5����������� 6��*D������0���昂昂昂昂�
� � �������������������� �������������@;�����$�4 �A�4�7(8��
��������������������������������������������������������������������������������������!�$�C)�
� �
��������������F�3������ � � �������4 �A�4��87�!�$�)<�
�
�����������������������������������2#&3��"&�*�%#!!.(3?�+2#!!�&�%�$����(*"%%�'�������������������������������晃晃晃晃�
�
�
�����������$��������#�������� �� ���������������)'��<���� �����:����'��<���� ���������������
����������������������� ������� �������:�� ��������� ��� ������$��������������������������������������昂昂昂昂����
��������������������������������
������������)$��4����������#�9��� ���9�� �:��������� ����������������������������� � ����
5�@ 5@�/�*���@(0� ����� ���� ����:����)���������;=!�9�G� ��5��������
������� ����:����#� �)��������4���� ������ �$� �D��������������� ��������
�����#���� ������� ���,�;������$����������������������������������������������������������昂昂昂昂�
�
�
@�����������+%"&3�
�
������������*0���<#���������
� � � �
� � ���#� ��1��)���>�9��)��
� ����� �������������������1���''�>�9��)��������������������������������������������������������������������������������������������������������
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ��������##����������������� ������
��
����������������������3�� ���������1���''�>�9��)����������� � � ���
�������������� �
��������������������D������������<#�������������� ��������� �� ������������������ ���������
���������������������, �������$��4���� �����#�>����� ���#��������������������������� �$�
� � ������������ �
������������*�0���� �������������'$'�>�9���)����*:������������������� �:���0$��������������������昂昂昂昂�
� �
*��0������������9�������������������������#����� ������#���� ����������������6����
��H�� ������:$�
�
*�0�����4������45,�'8������� ��2�, ������� ���������� �%����#�9� ���2���3� ����
������������������������������������������������������������#������ �����������������������������晃晃晃晃��
�������������*�0����4������#���������� ��� ������������� �%���������������������� ��� ���
���������������������������� ��� ��#� ���&��� ��#�:���������������3�� �$�5"��������������
���������������������������������������������� ������� ��������������������#� ��� ���
�������������������������������������$�������������������������������������������������������������������������������������������晃晃晃晃���������������������������
�����������
����������������������A&'�(�&���"(�.*+%#&���+2#!!�#&?��;�%2��#$�5��%�+%+�$��>#"5�'��;;��������晃晃晃晃�
�
1���������������B��2"('���#(%?���&+���%"�&������������������������������������������������������������������������晃晃晃晃����������������������������������
�
*0� A ��������������3���� ���� ������� ������� � ������� �����������#��
�5�=�9�������5��#�, ������� �4�� �#$��
�
*�0� ����� ����������������� ����I����#�4���� ���5� ����������#�����������
���#�� ������� ��� �#$��
�
*�0� <�:����%��5�=� ����� �������� ���� ������ ��� ����� ����� ���� ������ �� ���������#�
���� ����� �:�����:����� ������ ����� ������������������� ����������#��
��������5�=�, ������� �C������ �$�
�
*�0� 4��������� ���������� ���� ����� ���������� � �������� � ���������#��5,�������
I45����������#�����%�� ����������:����:��������#��5�=�� �:���� �$�
�
*�0� �5�=�9�������5��#�, ������� ����������3�9�:�� ������������:� �1�
�
�
�$������������������#�� ������� ������:�� ���� �������#��������#�9� ���9���3���
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ��������##����������������� #�����
��
����#���������2��������������B������$�
�
��$�����������������#�� ������� ��� ����� ���������� ������� $��)�B����������
���������������� ���#%����������3��������� ��������� ������� ����������%�
�� ����&%��� ������:���%�����%���� ��������������%���������#�9��� ���
:��� ����3 ���%� � �� ���3��� �������� �������%� ���3��� �� �������� � ��
�� ����� :��� ����3 ���%� ��� ��� ��� ���� ��� $� ���� � �� ��� �� ����
���� ��� � ����3� ����� ��� ��������� �� ���������� �#� ���� ������ ���#�
� ������� ��� ��:����������������������� ���$��4 #�������� ������������
����� ������ ��� ���� ���������������� ������������E�����$��
�
���$� �4��� �������'�B�������������������3����������������������#$�
�
��$� �"����� � �������� �� �������� �#� ������ ���#� � ������� � ����� � �#� ���
���������,�;�������$��
�
��� �������������#��� ������� ��������:�� ������������� �#����9��� �����5A,��
*5���������������������� ������� 0��������������������������B��� ����#���������
���������������������������������$�� ������ #�������� ����������������
��������� �� �� � � '(')� 9� 45,� /�)� ��� ����� ���������� %� ��� ���� ������
������� ���� �#� ���� ������ ������� � ����� �� �� ��E������ �� ����
� ��������������������������������������$�
�
��$� ����� ������ ���#� � ������� � ����� �����:� ���� � @������ 9� ���@��������
�� ������ �������� 2� ��#����� ����� ����������� �� ���� ��� �� �:�
������������������������$��
�
���$� �4����������&���������,�;�����������������������#������5,$��������������������������������������������������
�
����������������������������������B������+2#!!��&�%��$���>#"5�'���;;��.&'�(��#&?���"(�.*+%#&������������������������
�
8��������C.#!"%?����������������������������������������������������������������������������������������������������������晃晃晃晃�
�
������������"� ���������� ����� ���� ������������� ���� ���� #����� �� 9�������#����������
����$�,������������������� �������#�������� ���������������3���������������$��
������������4 #����� ����������� ��3������� ���E�� �%��� ���� ������ ���#���������� ����
�������������� ������� %����������������� ����E�����$�<�:������ �� �� �����
�
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ��������##����������������� !�����
��
��������������������������� ���������������������%������� ������������������������������������
����$������
�
"�#��� 0#&.;#�%.(�(+����+%����(%";"�#%���
A ��������:���������������������������������������������������� ���� ������
������ ���� ��� � � �������� �� ������� � � ����� ��� :���� �� ���� ����������
� ����� ��������������� ��� �������� � ���������#������������������ ��$�
�
� � �����������������������������#��� ������������:� ��� ������ 1�
�
� � �$��������������� ������ �����$�
�
� � ��$����5����������������� � ������ ��� �$�
�
� � ���$���A������������������������������� � ��$�
�
���������������$��<���9�����9������ �$���������������������������������������������������������������������������������������晃晃晃晃�
�������
���$��;���������������������9���#����������$���������������������������������������������������������晃晃晃晃""""�
� ��$���<#���������������������������������#%�������2����3������� ��������������
������������������������:���������������������������#��:��������$���������������������������������������攻攻攻攻��
� �
����$�,�� ������� ���3��������� �'(')�9�45,�/�)$��������������������������������������������晃晃晃晃��
�
6���������0#(D"&3����������������������������������������������������������������������������������������������������������������晃晃晃晃�
�
+������������������ �����:������������:� ���������1�
�
���$�����<���9����� �����$���������������
�
���������������$����A������4 �A����������� � �����$�������������������
������������������������
����$�����5,�9�,�;������ �$��������
�
���������������$���� �6��9������
�
������ 0#%�("#!������%#&�������������������������������������������������������������������������������������������晃晃晃晃�
�
���������������� ������ ����� ��� ��������� � � �5�=� :�������� � �#� �� ���� �� ��� �� �� ���
����� ����:������������:� �������� ��$�
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� ��������##����������������� ������
��
�
�$����A ����������������������� ��� �������$�
� �
��$� ���������#�� ������� �������$�
�
���$������������#�� ������� �������� ���$�����������������������
�
���������������$���-���� ��,�;������������ ������,,,@�����,�;��� ��� �� �$�����������������晃晃晃晃������
�
������������������������� ������������5�=�:�������������� �� ��������� ��������E������
��� � ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� $���������������������������������������������������������������������������������������������������晃晃晃晃�
�
��
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� �������#�������������� �� !�"�
��
����� ����������� ����� ����������������� ����
��������������������� ����������
� � � � � � � � �
���� ��� !�����������������������������������������������������������������������������������������������������������������塊塊塊塊���������������������������������������
�
��������������� ������������������������������ ����������� ������������������
�������� ������� �����!���������"�������� #�������������$�������������������
����% ��#�� �������� �������������������������� ����#��&����������������"�
��������������� $��
�
������� "#�$%"!��&$'($)(����������������������������������������������������������������������������������������塊塊塊塊��������������������������������������
�
��������������'()�������������*������ ������� �����!����������+������,��-����$�
� ./0���1'�������������*��!����0 ������� �2������ %�
.��0���-$��������*��/����� %��� ��� %������� %�$�
���������.��0���-$�������*��3������������� ��� ������ %���� ��$�
���������.��0���-$)4�����*��!�����,�3� %��#��������� ��5���� %�� ��$�
���������6����/7����������*��8����"��� ����������������� %�#�������������� ������� $�
�
����������&!*��+!,�)# &#�'����������������������������������������������������������������������������������������������塊塊塊塊��
� 0���� *������������� ������� ������!�����
�
� ��+�� *� ���,��-����$�
�
� 9�� %� *� .��0�������������
�
������������: ��� *� �0 ��%���"�3� %���93��������� ���������
� � � �.��0����-$��
� �
� �
�
-� ��.���!'��/ &$� ��0�1���$�� ����-���� ��)*$&��2$'3!�4��!5#,#�'����塊塊塊塊�
�� �..� ���� �6����76� ��)*$&��2$'3!�4��!5#,#�'�昂昂昂昂�
�� ���.� ������ �-����7-� 77�
�� ����������������77� ������������77�� ������7�� 77�
�� ����������������77� ������������77�� �������68� 77�
���� ��� �+��9� �����+��9� + �� �1 �.��
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� #� !�"�
��
�
� 9���%���"� *� �; ��������������� %����� �$�������������� ���"��
������������������������������������������������������������ � %���� "��� %����������������$�
�
� � /��������<� *����������=%<���%��>��'�
�����������?��.������������������������������昂昂昂昂�
����������������������������������������������$4��=%<���%��>�)���
�����?��.��0����-�$)4�
�
-��� �',&)/�&#�'��1$&!)#$"�
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::���
�
�$"5!���* �'!'&� �',&)/�&#�'��� 1$&!)#$"�
� ������ ��!;/#)!(� � � !�#<#�$&#�'�
� ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::�
� � ���"� � ���� %� �� .��6�.7��-��� �$�@��������������������昂昂昂昂�
� � � � � � A���� ��$��B��&$C� � �
� �
� � �� ��� � ������� � .��6�.7��-�� �$�@���
� �
� � ����� ������9��� %� � �)B���$�������A������� %C����������������昂昂昂昂�
� � � � � � AD�� ��������7��(��D�$C�
� � A������� �����$4������ C�
�
������������E��������������������������������������/��%��� �)B���$������<�.���-� �$�@�����������������
� � � � � � 5�����)B���$�D����� %��
� � � � � � A6� $��$-��������F ���C�������������������昂昂昂昂�� � �
���������������"�����9� %�� 9� �5���� �)B���$������<�.���-� �$�@������������������
� � A����5���<����������������5�����)B���$�D����� %��������������昂昂昂昂��
� � 5�����C� � �A6� $��$-��������F ���C� �
� � � � ��� � ���������������������������� � � �
�������������F���������� %� � ��)B���$�������A������� %C��������������
� � � � � � AD�� ��������D�$�6� $C�
� �
�����������D �5����� �� 7���� %� .��6�.�))'��<�.���-�@����<����������昂昂昂昂�
� � � � � �0�� �<�.��6�.��)-�� �$-�74�7�'����
� � � � -�74�7���<�0���'-��A ��4���<���C� �
� � � � �$%)#�$&!(�=$'(>2!!",�$)!�'�&�
� � � � ��$��! &$%"!�� � � � �
�
� ����������� ���<� � ���������� �������������������������������.��6��.7�1)� �$��(�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� �� !�"�
��
� �
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;����
�$"5!���* �'!'&� �',&)/�&#�'��� 1$&!)#$"�
� ������ ��!;/#)!(� � � !�#<#�$&#�'�
� ��������::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::�
� �
� ��������� ���<� � ������� � � �.��6��.7�14� �$��D�
�
� ���������� ��� �F��� � ������@�� ����7)�4�5�����
����������������������������������������������������������������������������������������������� .��������3�������������������昂昂昂昂�
����������������������������������������������������������������������������������������0�� ����$�
�
���������� �F�������� ���� � � (��..9D�����&$�
� �
� ������������/�F� %� 9� �5����5���� 0 �� ���������� �������.����������昂昂昂昂���
� � �������� �� � 5�������������������� �� ��������
�� � ������
� �������G�F�� � � .��6�.���-�� �$�@�������������������������昂昂昂昂�
������������������������������������������������������������������������������������A����� ��$��B��&$�C�
�
� ������G�F���������� � � /����������� +��A@���%��C������������昂昂昂昂��
� � �������������������� �����79�����$�.��6�.�4)1� �$�E��
�
� ������G�F������ � � .��6�.��14� �$��D�
�
����������������������������������2$'3!�#'�*!&$""/)3?�,2$""�'�&�%!� !)*#&&!(����������������������������������塊塊塊塊�
�
� ����*�
� �
� �$� ���� � ���"� � ���� �� %� � �� ����� � ������� � ��� ��� ����� �����D�� �5���� ����D���
�� ���������� ����� ���� �������5�� �����"�������� %� ������$��������������昂昂昂昂�� �
� �$� .��� � ���"� <� �� ��� <� � �5����� ���� %� ����� ��� ����� ������� �� ���� �� ����
��/�7�/7-� A�.�:7)C� �� ��� � � �� ���� 5���� �F��� ���� ������ �� ��������
.���� ������ ���������������4���������� %��� ���������F ������-��E3�$��昂昂昂昂�����������������������������
������������������������������������������������������������������������������������������������������������������������������������������������
� �
�
�
�
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� �� !�"�
��
� �
�����������!,&#'3�
� � �
� AC����D"���������
� � � �
� � ����"������������*��)���=%<���%�
�
� � ����� �����*������=%<���%�
� � �����
���������������������F��������*������=%<���%����������� � ��� �
�
� @� @������������D"�������������� %�������� �� ������������������ �� �������$���
������������������������.���� �����"�=����� ���"��������������������������� %$�
� ������������������ � � �
A�C��������������������$-�F%<�����A5�������������������������� �5��������������������
���������������5����5���$C��������������������������������������������������������������������������������������晃晃晃晃�
�
� A�C����3� %�������������� �� �����<�������"������������� �������6��7�/7-$�
� �
� A�C������������� %��������� ��������.��0���-$�� �
�
� A�C���3������������<���������������+������2�����#�������������F� %������������������
���5�� ����������� ������� ����A�������"��"���F�5���� %C$�
� � �
������������AC���.������./0��1'������ %�2�0 ������� ���������� �#����"�<�����2���F����������
�����B�����������������������������"������ �������$� �
�
������������A%C� ��!������4�� ������������������������5����������%��������� %����� ���#������
���������������������������� ��5����������������� �������$��
� � � �
A�C����.�����"��������� ��� ������������ %#���������������������� ��� ��������
��������� ��� ��"� ���&��� ��"��5���������������F%� %$�/!��������������������������
�������������� ������� ������������������������������$�
�
����������������������A'(!)�'���#)�/*,&$'�!�,2$""�$'?��<�&2!�$%�5!�&!,&,�%!�>$#5!(��<<�������������
���������������������
��������������B��2#)(���$)&?���', !�&#�'�������������������������������������������������������������������塊塊塊塊������������������������������������
�
AC� 6 ��������������F���� %��� ������� ������� � ������� %����������"��
�/�H�<�������/��"�0 ������� �.%� �"$��
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� �� !�"�
��
�
A�C� ����� �������� �����%��� ����8����"�.���� ���/� ����������"� ���� ������
���"�� ������� �%� �"$��
�
A�C� D�5����#� �/�H� ����� �������� ���� ��%��� ��� ����� ����� ���� ������ �� ���� �����"�
���� ����� �5�����5����� ������ ����� ���������������� ���������"��
��������/�H�0 ������� �E������ �$�
�
A�C� .��� ������ ��������� � ���� ����� ���������� � �������� � �������� �"��/0� �� ����
8./����������"�����#�� ����������5����5��������"��/�H�� �5���� %$�
�
A�C� �/�H�<�������/��"�0 ������� ����������F�<�5�� ������������5� %*�
�
�$������������������"�� ������� ������5�� ���� �������"��������"�<�����<���F���
�����"���������2��������������B������$�
�
��$����������������"�� ������� �� ��� ��������� %����� ��������B���������
���������� ���"#����������F��������� ��������� ������� ����������#�
%� ����&#��%� �������5���#�������I�� �#���� ����������������#���������"�<�
�� ��� 5��� ����F ���#� � �� � %�� �� ����� � ����F ���#� � ��� ��� � ����
���� ��� $������� �� %��������������� ��� �����F����������������������������
�������������"��������������"�� ������� ��� %�5������������������������
���$� � . "� ������� � ��� ������ �� ����� ���� �� ��� ��� � � ���� �� �������
����������I�����$��
�
���$� .��� ���������B�������������������F����������������������"$�
�
���� ��������������"��� ������� ������5�� ������������ �"����<���� ������/60��
�A/�������� ������� ��� ������� C� �� ��� ���� ����� �� ��B� � ����"��
����������������� ����������������$�������� "�������� ������������ �����
��������� ����������������������� #������������������������� ������"������
����������������� �������� ����I������ ������� ��������������������
� �����������������$��������������"�� ������� ������������� ����������
������� �� %�����/60�� ������� $��
�
�$� ���� ������ ���"� � ������� � ����� �����5� ���� � 7������ <� ���7��������
�� ��������������2���"�������������������������%� %�� ���5��������
�����������������$��
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� �� !�"�
��
�
��$� .����������&���������0�9�����������������������"������/0$�������������������������������������������������
�
���������������������������������B������,2$""��'�&��%!��>$#5!(���<<��/'(!)��$'?���#)�/*,&$'�!����������������������
�
"�$�����������%&'()%*%+,-����������������������������������������������������������������������������������������塊塊塊塊���������
0����������� ����������������������������������� %��������� ����0�9#�������
� �������� �� �������� �"� ������ ���"� � ������� � ����� � �"� ��� ������ ��� 0�9�
������$�6 ��������������� %��������� � ������"������������� �3����0007��
��0 �� ��������9�%����� #����"��������� ����� �����% ����"��������0 ������� �
.�������"� �������������������� %�5�������������$�
�
6�����C/$"#&?����������������������������������������������������������������������������������������������������������������������塊塊塊塊��������������������������������
�
������������!� ���� ����� � ����� ���� ���������� ��� ���� ���� "� ���� %� <� ������"� ������ ���
��%�$�0������������������� �������"��� ����� �������� �������F���������������$�
. "����� %������������F������� ���I�� ��#�%� ����� ������ %��"��������������
������������� ������� #����������������� ����I�����$�D�5������ �� �� %���������
��������������������� ���������������������#����������������������I������ ������� ��������������
�������������������������$������
�
.�$���1$'/<$�&/)!),���!,&��!)&#<#�$&!���������������������������������������������������������������������������塊塊塊塊�����������
6 ��������5���������������������������������������������������� ���� %�����
������ ���� ��� � � �������� �� ������� � � ����� ��� 5���� �� ���� ����������
� ����� %�������������� ��� �������� � ���������"������������������ ��$�
�
� � �����������������������������"��� ������������5� %�� ������ *�
�
� � �$��������������� ������ �����$�
�
� � ��$����/����������������� � ������ ��� �$�
�
���$� 6������������������������������� � ��$�
�
������������$��D���<�����<������ �$�����������������������������������������������������������������������������������
�������
������������$���9���������������������<���"����������$�������
� � �
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� "� !�"�
��
�
���$���D"���������������������������������"#�������2����F������� ��������������
�������������������������5���������������������������"��5��������$������
�
���$� 0�� ������� ���F��������6��7�/7��$�
�
�������1$)E#'3������������������������������������������������������������������������������������������������������������������������塊塊塊塊�������������������������
�
:������������������ �����5������������5� %��������*�
�
���$�����D���<����� �����$���������������
�
���������������$����6������.��6����������� � �����$�������������������
������������������������
����$�����/0�<�0�9������ %$��������
�
���������������$������+��<������
�
����� ��1$&!)#$"� ��! &$'�!���������������������������������������������������������������������������������������塊塊塊塊�
�
����������������������������������������� ��/�H�5��������� �"��������� ��% �� ��������
������������������� ����5������������5� %������� ��$�
�
���$����6 ����������������������� ��� �������$�
� �
��$� ���������"�� ������� �������$�
�
���$������������"�� ������� �������� ���$�����������������������
�
��������������$���;��%� ��0�9������������ �3����0007�����0�9��� ��% �� �$�������������������""""
�
������������������������� ������������/�H�5�������������� �� ��������� %�������I������
��� � ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� $���������� "�������� ������������������������� ��������*��'()#�����
���� ������ ������� ���� �"� ���� ������ ����� ��� ��I������ �� ��������� ����� ������� �
�����������������$��
����������������������������������������������������������������������������������������������������
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� �� !���
��
����� ����������� ����� ����������������� ����
��������������������� ����������
� � � � � � � � �
���� ��� !�����������������������������������������������������������������������������������������������������������������塊塊塊塊���������������������������������������
�
��������������� ������������������������������ ����������� ������������������
�������� ������������� ���������!�������� "�������������#�������������������
����$ ��"�� �������� �������������������������� ����"��%����������������!�
��������������� #��
�
������� "#�$%"!��&$'($)(�����������������������������������������������������������������������������������������塊塊塊塊�������������������������������������
�
�������������&'(��������������)������ ������������� ����������*������+�&,����#�
� -./��01'�������������)�� ����/ ������� �2������ $�
-��/��&,#0�������)��.����� $��� ��� $������� $�#�
���������-��/��&,#&������)��3������������� ��� ������ $���� ��#�
���������-��/��&,#�4�����)�� �����+�3� $��"��������� ��5���� $�� ��#�
���������6����.700��������)��8����!��� ����������������� $�"�������������� ������� #�
�
����������&!*��+!,�)# &#�'���������������������������������������������������������������������������������������������塊塊塊塊��
� /���� )������������� �������������� �����
�
� ��*�� )� ���+�&,����#��
�
� 9�� $� )� -��/�������������
�
������������: ��� )� �/ ��$���!�3� $���93��������� ���������
� � � �-��/���&,#0�
� �
� �
�
-� ��.���!'��/ &$� ��0�1���$�� ����-���� ��)*$&��2$'3!�4��!5#,#�'�塊塊塊塊�
�� �..� ���� �6����76� ��)*$&��2$'3!�4��!5#,#�'�8��� 77� 77� %@��-�7�� 77�
�� ���������������� 77� ������7�� 77�
�� ���� +�+� ������6@� 77�
���� ��� �+��:� �����+��:� + �� �1 �.��
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� "� !���
��
�
�
� 9���$���!� )� �; ��������������� $����� �#�������������� ���!��
������������������������������������������������������������ � $���� !��� $����������������#�������������������塊塊塊塊������
� � .��������<� )������0���=$<���$��>��'�
�����������?��-����������������������������������8�
����������������������������������������������0#���=$<���$��>�����
�����?��-��/���&,�#�4�
�
-��� �',&)/�&#�'��1$&!)#$"�
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;����
�$"5!���* �'!'&� �',&)/�&#�'��� 1$&!)#$"�
� ������ ��!</#)!(� � � !�#=#�$&#�'�� ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;�
� � ���!� � ���� $� �� -��6�-7�&,�����#�@���������������������8�
� � � � � � A���� ��#�0B��%#C� � �
� �
� � �� ��� � ������� � -��6�-7�&,����#�@���
� �
� � ����� ������9��� $� � &�B���#�������A������� $C�����������������8�
� � � � � � AD�� ������0�7��(0�D�#C�
� � A������� �����#4������ C�
�
������������E��������������������������������������.��$��� &�B���#������<�-��&,���#�@�����������������
� � � � � � 5����&�B���#�D����� $��
� � � � � � A6� #�&#,��������F ���C��������������������8�� � �
���������������!�����9� $�� 9� �5���� &�B���#������<�-��&,���#�@������������������
� � A����5���<�������������5����&�B���#�D����� $�����������������8��
� � 5�����C� � �A6� #�&#,��������F ���C� �
� � � � ��� � ���������������������������� � � �
�������������F���������� $� � �&�B���#�������A������� $C��������������
� � � � � � AD�� �����0��D�#�6� #C�
� �
�����������D �5����� �� 7���� $� -��6�-���'��<�-��&,�@����<�����������8�
� � � � ���/�� �<�-��6�-�0�,����#,�74�7&'����
� � � � ,07407&��<�/��&',0�A���4���<�&�C� �
� � � � �$%)#�$&!(�>$'(?2!!",�$)!�'�&�
� � � � $��! &$%"!�� � � � �
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� �� !���
��
� ����������� ���<��� ���������� ����������������������������-��6��-7&1����#��(�
� �
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;����
�$"5!���* �'!'&� �',&)/�&#�'��� 1$&!)#$"�
� ������ ��!</#)!(� � � !�#=#�$&#�'�� ��������;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;�� �
� ��������� ���<��� ������� � � �-��6��-7&14���#��D�
�
� ���������� �����F��� � ������@�� ����7��4�5�����
����������������������������������������������������������������������������������������������� -��������3���������������������8�
����������������������������������������������������������������������������������������/�� ����#�
�
������������F�������� ���� � � (��--9D�����%#�
� �
� ������������.�F� $� 9� �5����5���� / �� ������������������-�����������8���
� � �������� �� � 5�������������������� �� ��������
�� � ������
� �������G�F�� � � -��6�-��&,����#�@��������������������������8�
������������������������������������������������������������������������������������A����� ��#�0B��%#�C�
�
� ������G�F���������� � � .����������� *��A@���$��C��������������8�
� � �������������������� �����79�����#�-��6�-�4�1���#�E��
�
� ������G�F������ � � -��6�-�&14���#��D�
�
����������������������������������2$'3!�#'�*!&$""/)3@�,2$""�'�&�%!� !)*#&&!(��������������������������������������塊塊塊塊�
�
� ����)�
� �
� &#� ���� � ���!� � ���� �� $� � �� ����� � ������� � ��� ��� ����� ��0��D�� �5�����0��D���
�� ���������� ����� ���� �������5�� �����!�������� $� ������#��������������8�
� �
� �#� -��� � ���!� <� �� ��� <� � �5����� ���� $� �� ������ ����� ��� ����� ������� �� ����
�� ���� ��.�7�.7,� A�-�:7�C� �� ��� � � �� ���� 5���� �F��� ���� ������ ��
��������-���� ������ ���������������4���������� $��� ���������F ������,��
E3�#�������������������������������������������������������������������������������������������������������������������8�� �
�
��������������
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� �� !���
��
�
� �
�����������!,&#'3�
� � �
� AC����D!���������������������������������������������������������������������������������������������������������8�� � � �
� � ����!������������)��((��=$<���$�
�
� � ����� �����)��0(��=$<���$�
� � �����
����������������������F���������)��0(��=$<���$���������� � � ��� �
�
� A� @������������D!�������������� $�������� �� ������������������ �� �������#���
������������������������-���� �����!�=����� ���!��������������������������� $#�
� ������������������ � � �
A�C�������������������0#,�F$<�����A5�������������������������� �5��������������������
���������������5����5���#C��������������������������������������������������������������������������������������晃晃晃晃�
�
� A�C����3� $�������������� �� �����<�������!������������� �������6��7�.7,#�
� �
� A�C������������� $��������� ��������-��/��&,#0� �
�
� A�C���3������������<���������������*������2�����"�������������F� $������������������
���5�� ����������� ������� ����A�������!��!���F�5���� $C#�
� � �
������������AC���-������-./�01'������ $�2�/ ������� ���������� �"����!�<�����2���F������������
&��B�����������������������������!������ �������#� ������������������������晃晃晃晃��
������������A$C� �� �����&4�� ������������������������5����������$��������� $����� ���"������
���������������������������� ��5����������������� �������#��
� � � �
A�C����-�����!��������� ��� ������������ $"���������������������� ��� ��������
��������� ��� ��!� ���%��� ��!��5���������������F$� $#�. ��������������������������
�������������� ������� ������������������������������#�
�
����������������������B'(!)�'���#)�/*,&$'�!�,2$""�$'@��=�&2!�$%�5!�&!,&,�%!�?$#5!(��==������晃晃晃晃����
���������������������
��������������C��2#)(���$)&@���', !�&#�'�������������������������������������������������������������������晃晃晃晃������������������������������������
�
AC� 6 ��������������F���� $��� ������� ������� � ������� $����������!��
�.�H�<�������.��!�/ ������� �-$� �!#��
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� �� !���
��
�
�
A�C� ����� �������� �����$��� ����8����!�-���� ���.� ����������!� ���� ������
���!�� ������� �$� �!#��
�
A�C� D�5����"� �.�H� ����� �������� ���� ��$��� ��� ����� ����� ���� ������ �� ���� �����!�
���� ����� �5�����5����� ������ ����� ���������������� ���������!��
��������.�H�/ ������� �E������ �#�
�
A�C� -��� ������ ��������� � ���� ����� ���������� � �������� � �������� �!��./� �� ����
8-.����������!�����"�� ����������5����5��������!��.�H�� �5���� $#�
�
A�C� �.�H�<�������.��!�/ ������� ����������F�<�5�� ������������5� $)�
�
�#������������������!�� ������� ������5�� ���� �������!��������!�<�����<���F���
�����!���������2�����������&��B������#�
�
��#����������������!�� ������� �� ��� ��������� $����� ��������B���������
���������� ���!"����������F��������� ��������� ������� ����������"�
$� ����%"��$� �������5���"�������I�� �"���� ����������������"���������!�<�
�� ��� 5��� ����F ���"� � �� � $�� �� ����� � ����F ���"� � ��� ��� � ����
���� ��� #������� �� $��������������� ��� �����F����������������������������
�������������!��������������!�� ������� ��� $�5������������������������
���#� � - !� ������� � ��� ������ �� ����� ���� �� ��� ��� � � ���� �� �������
����������I�����#��
�
���#� -��� �������0�B�������������������F����������������������!#�
�
���� ��������������!��� ������� ������5�� ������������ �!����<���� ������.6/��
�A.�������� ������� ��� ������� C� �� ��� ���� ����� �� &�B� � ����!��
����������������� ����������������#�������� !�������� ������������ �����
��������� ����������������������� "������������������������� ������!������
����������������� �������� ����I������ ������� ��������������������
� �����������������#��������������!�� ������� ������������� ����������
������� �� $�����.6/�� ������� #��
�
�#� ���� ������ ���!� � ������� � ����� �����5� ���� � 7������ <� ���7��������
�� ��������������2���!�������������������������$� $�� ���5��������
�����������������#��
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� #� !���
��
�
�
��#� -����������%���������/�9�����������������������!������./#�������������������������������������������������
�
���������������������������������C������,2$""��'�&��%!��?$#5!(���==��/'(!)��$'@���#)�/*,&$'�!�����������������������
��$������������%&'()%*%+,-������������������������������������������������������������������������������������""""晃晃晃晃��������
/����������� ����������������������������������� $��������� ����/�9"�������
� �������� �� �������� �!� ������ ���!� � ������� � ����� � �!� ��� ������ ��� /�9�
������#�6 ��������������� $��������� � ������!������������� �3����///7��
��/ �� ��������9�$����� "����!��������� ����� �����$ ����!��������/ ������� �
-�������!� �������������������� $�5�������������#�
�
6�������D/$"#&@�������������������������������������������������������������������������������������������������������""""""""晃晃晃晃������������������������������������������
������������ � ���� ����� � ����� ���� ���������� ��� ���� ���� !� ���� $� <� ������!� ������ ���
��$�#�/������������������� �������!��� ����� �������� �������F���������������#�
- !����� $������������F������� ���I�� ��"�$� ����� ������ $��!��������������
������������� ������� "����������������� ����I�����#�D�5������ �� �� $���������
��������������������� ���������������������"����������������������I������ ������� ��������������
�������������������������#������
�
.�$����1$'/=$�&/)!),���!,&��!)&#=#�$&!�������������������������������������������������������������������������晃晃晃晃�����������
6 ��������5���������������������������������������������������� ���� $�����
������ ���� ��� � � �������� �� ������� � � ����� ��� 5���� �� ���� ����������
� ����� $�������������� ��� �������� � ���������!������������������ ��#�
�
� � �����������������������������!��� ������������5� $�� ������ )�
�
� � �#��������������� ������ �����#�
�
� � ��#����.����������������� � ������ ��� �#�
�
���#� 6������������������������������� � ��#�
�
������������#��D���<�����<������ �#�����������������������������������������������������������������������������������
�������
���������������������������������#���9���������������������<���!����������#�������
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� �� !���
��
� � �
�
���#���D!���������������������������������!"�������2����F������� ��������������
�������������������������5���������������������������!��5��������#������
�
���#� /�� ������� ���F��������6��7�.7�0#�
�
�������1$)E#'3�������������������������������������������������������������������������������������������������������������������""""""""晃晃晃晃���������������������������
:������������������ �����5������������5� $��������)�
�
���#�����D���<����� �����#���������������
�
���������������#����6������-��6����������� � �����#�������������������
������������������������
����#�����./�<�/�9������ $#��������
�
���������������#������*��<������
�
����� ��1$&!)#$"� ��! &$'�!�����������������������������������������������������������������������������������""""晃晃晃晃�
�
����������������������������������������� ��.�H�5��������� �!��������� ��$ �� ��������
������������������� ����5������������5� $������� ��#�
�
���#���6 ����������������������� ��� �������#�
� �
��#� ���������!�� ������� �������#�
�
���#�����������!�� ������� �������� ���#�����������������������
�
��������������#���;��$� ��/�9������������ �3����///7�����/�9��� ��$ �� �#�������������������""""
�
������������������������� ������������.�H�5�������������� �� ��������� $�������I������
��� � ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� #���������� !�������� ������������������������� ��������)�&'(�"�����
���� ������ ������� ���� �!� ���� ������ ����� ��� ��I������ �� ��������� ����� ������� �
�����������������#��
����������������������������������������������������������������������������������������������������
�
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� �������������������� ������
��
������������������� �����������������������������
� � � � �����������������������������
�
�
� � � � � �
���� ��� !����������������������������������������������������������������������������������������������������������������昂昂昂昂�
�
����� ���������� � ������� ���� �������� ��������� �� �� ��� ��� ���� ��� ����� ����
����������� � ���������!�"����������#�������� $�����%�����������$������������
����� ��� ����� ��%� � �������� �� ������� �� ���� ��������� �� ����%� �&����� ��
���������#���������������� $�
�
"��� � #$�%&#!��'%()%*)����������������������������������������������������������������������������������������昂昂昂昂�
�
� ��'(')�*������������#�� �+��, -��'./�0��1�� �����2��%�2�����3�����!����������
�������������������������������������������������������������������������������������$�
�
45,�/�)��1�� �����2��%�2�����3�����!�"����������6����5 �7�� ��������$�
�
45,�'8���1��"����, ������� �3������ �$�
�
4� ,����$)�$��
�
4� ,����/$���
�
�
+��� �'!,���!-�*$ '$�(�
�
� ,���� 1����������������� �� ����������!��"������ � �
������������������������������������������������������*5���� ��#��0��9������������������$�
�
� + ��� 1� , ��� ��#������������4� ,������$)�$��*�5�0�:������������̈̈̈̈�� � ��!����9�������4� ,����/$��� ��$���������������������������������������
� �
� ;�� �� 1� 4� ,����������
��������
�
+� ������!(� . '%� ��/�0���%�� �1��2��"� ��*,%'��3%(4!�5��!6$-$�(�昂昂昂昂�
"� ���� ���� +�����7�� ��*,%'��3%(4!�5��!6$-$�(�̈̈̈̈�
�� ���� 88� ������7�� 8�
�� 88� ���� ����9�7�� 8�
����� ����������:� ���������:� ����� ��0�����
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� �������������������� ������
��
�
�����������������;�������#� 1������������������
� �
� � ������� 1� <#������� �*=�����%�"�����3�2�0%�5� ��3�5�������4��%�
������� ���%� ����� �� 9���%� ������� ����� ������ %� ����
������ �� �� *�� � ,�;0%� ������� %� ���#��� �� "�����
��� � �������%� ����:������������9�����*,�;0$����������̈̈̈̈������������������������� � � � � � � � � � �
������� 5�������:� 1� �(/$)�>�:��)����)�����$���$�����?��4�������� @'(')����
� ����������� � ����$���>�:��)����7������$���$��?���������������������������������̈̈̈̈��
�
� � �
2��� �(-'*.�'$�(��0%'!*$%#�
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;�
������%#6!�� � �(-'*.�'$�(������������������0%'!*$%#���� !�$<$�%'$�(�
������, �(!('� � �!=.$*!)��� � �
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;�
�
� � � ���#� � ������� 4 �A��4@��'�*���������0%�
� � � � ���� ���$)'B��&$�
�
����������������������� � ������� � � 4 �A�4@��'�*���������0�
���������������������������������������������������������������������������������������������������� ���$)'B��&$�
�������������
������������� 5���� � � <���6� ��� �������������(B���$� ��������������������������̈̈̈̈�
� ����������������������������������������������������5���� ��
�
���#� ���;� �� �������������������������������������������������(B���$� ��������������������������̈̈̈̈�� � � �
������������� � � ������������4 �A��4@�8(��2��$�.�
� � � � �
������������ � � ������������4 �A��4@�87�2�$�)<�
�
�������2�!��� � � ������������4, ,@(�7�C�!���������
� � � � ������������ �����D�� ���9�����
�����������������������������������������������������������������������������������������������������������4��������������$�
�
����������������������������������3%(4!�$(�,!'%##.*4>�-3%##�(�'�&!� !*,$''!)������������������������������昂昂昂昂�
�
�$� ���#�������� �� ������� ���������)'��<���� �����9����'��<���� ������
����������� ������� �������9�� ��������� ��� ������� $����������������������������������̈̈̈̈��
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� �������������������� ������
��
�
���������������)$�� 4��� ���� ������ ����� ��� ����� ������� �� ���� � ���� 5�@ 5@� /�����������������
*���@(0� ����� ���� ����9����)���������;=2�:�E� ��5���������������
����9����#��)��������4���� ������ �$��"�����9����,�;����������� �
����������� ������9���������� �$�����������������������������������������������������������̈̈̈̈�
�
����������������($���"� �����������������������!$�
�
����������������7$���"��������������!���9�����F���9���������� �F��� ��������#$��
����������
?����������!-'$(4�
�
� *0����<#���������
� � � �
� � ����������#����������1��)���>�:��)��
� ����������� ��������������1���''�>�:��)��
� ����������������������������������
�������������� D���� ����� ��� <#��������� ����� �� ����� �� �� � � �������� �������� �����
, �������$��4���� �����#�>����� ���#��������������������������� �$�
� �
�*�0����4������45,�'8������� ��3�, ������� ���������� �%����#�3� ����������
����������������������������������������������������#������ ����������������������������������������昂昂昂昂��
�������������*�0����4������#���������� ��� ������������� �%���������������������� ��� ���
���������������������������� ��� ��#� ���&��� ��#�9���������������!�� �$�5"��������������
���������������������������������������������� ������� ��������������������#� ��� ���
�������������������������������������$�������������������������������������������������������������������������������������������昂昂昂昂���������������������������
�����������
����������������������@()!*�(���$*�.,-'%(�!�-3%##�%(>��<�'3!�%&�6!�'!-'-�&!�A%$6!)��<<�������昂昂昂昂�
�
9��������������B��3$*)���%*'>���(- !�'$�(�����������������������������������������������������������������������昂昂昂昂������������������������������������
�
*0� A �������� ������!�� �� ���� ��� ��� � ������� � �� ����� �����������#��
�5�=�:�������5��#�, ������� �4�� �#$��
�
*�0� ����� �������� ����� ���� ����G����#�4���� ��� 5� � �������� �#� ���� ������
���#�� ������� ��� �#$��
�
*�0� <�9����%� �5�=� ����� �������� ���� ������ ��� ����� ����� ���� ������ �� ���� �����#�
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� �������������������� �����
��
���� ����� �9�����9����� ������ ����� ������������������� ����������#��
�
��������5�=�, ������� �H������ �$�
�
*�0� 4��� ������ ��������� � ���� ����� ���������� � ����� ��� � �������� �#� �5,� �� ����
G45����������#�����%�� ����������9����9��������#��5�=�� �9���� �$�
�
*�0� �5�=�:�������5��#�, ������� ����������!�:�9�� ������������9� �1�
�
�$��������� ������ ���#� � ������� � ����� 9�� ���� �� �����#� ���� ���#� :� ����
�#�������������������B������$�
�
��$�����������������#�� ������� ��� ����� ���������� ������� $��)�B����������
�������������� �� ���#%� ����� ����!� �������� �� ��� ���� �� ����� ���� ��
� ��� �����������#�:��� ���9�������! ���%�� �����!����������� �������%�
���!��� �� ��������� ���� �����9��� ����! ���%�������������� ��� $�
����� �� ������������� ��� �����!������������������ �������������#�����
���������#� � ������� ��� ��9����������������������� ���$��4 #�������� �
���������������� ������ ��� ���� ���������������� ������������C�����$��
�
���$� �"����� � �������� �� �������� �#� ������ ���#� � ������� � ����� � �#� ���
���������,�;�������$��
�
���� �������������#��� ������� ��������9�� ������������� �#����:��� �����5A,��
*5���������������������� ������� 0��������������������������B��� ����#���������
������������������������������ ���$� � ������ #�������� ����������������
��������� �� �� � � '(')� :� 45,� /�)� ��� ����� ���������� %� ��� ���� ������
������� ���� �#� ���� ������ ������� � ����� �� �� ��C������ �� ����
� ��������������������������������������$�
�
�$� ��������������#�� ������� �����������9������ @������:����@���������� ������
��������3���#��������������������������� ��� ���9����������������
���������$��
�
��$� �4����������&���������,�;�����������������������#������5,$���������������������������������������������������
�
����������������������������������B������-3%##��(�'��&!��A%$6!)���<<��.()!*��%(>���$*�.,-'%(�!����������������������
��
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� �������������������� !�����
��
��
1��������C.%#$'>��������������������������������������������������������������������������������������������������������������������昂昂昂昂�
�
������������"� ���� ����� � ����� ���� ���� ������ ��� ���� ���� #� ���� �� :� ������#� ������ ���
����$�,������������������� �������#�������� ���������������!���������������$��
������������4 #����� �������������!������� ���C�� ���� ������ ����#�������������������������
������������������ � ������� %� ���� ����� ����� �� �� ��C�����$� <�9����� � � � �� �� �� � ������
��������� ���������������������%������� ����������������������������������������$������
�
"�#��� 0%(.<%�'.*!*-���!-'��!*'$<$�%'!��
A ��������9���������������������������������������������������� ���� ������
������ ���� ��� � � �������� �� ������� � � ����� ��� 9���� �� ���� ����������
� ����� ��������������� ��� �������� � ���������#������������������ ��$�
�
� � �����������������������������#��� ������������9� ��� ������ 1�
�
� � �$��������������� ������ �����$�
�
� � ��$����5����������������� � ������ ��� �$�
�
� � ���$���A������������������������������� � ��$�
�
�������������$���<���:�����:������ �$�����������������������������������������������������������������������������������������昂昂昂昂�
�������
��$���;���������������������:���#����������$����������������������������������������������������������昂昂昂昂""""�
� ��$���<#���������������������������������#�3�������9���������������������������#��
9��������$����������������������������������������������������������������������������������������������������������̈̈̈̈��� �
���$� ,�� ������� ���!��������� �'(')�:�45,�/�)$���������������������������������������������昂昂昂昂��
�
7���������0%*D$(4�����������������������������������������������������������������������������������������������������������������昂昂昂昂�
�
+������������������ �����9������������9� ���������1�
�
���$�����<���:����� �����$���������������
�
���������������$����A������4 �A����������� � �����$�������������������
������������������������
���$������5,�:�,�;������ �$�
�
�
��
�����������
�
����������������� ���������������������������������
������������������ ��� ���������
�����
���������������������� �������������������� ������
��
��������
�
���������������$���� �6��:������
�
������ 0%'!*$%#����! '%(�!��������������������������������������������������������������������������������������������昂昂昂昂�
�
���������������� ������ ����� ��� ��������� � � �5�=� 9�������� � �#� �� ���� �� ��� �� �� ���
����� ����9������������9� �������� ��$�
�
�$����A ����������������������� ��� �������$�
� �
��$� ���������#�� ������� �������$�
�
���$������������#�� ������� �������� ���$�����������������������
�
���������������$���-���� ��,�;������������ ������,,,@�����,�;��� ��� �� �$�����������������������昂昂昂昂������
�
������������������������� ������������5�=�9�������������� �� ��������� ��������C������
��� � ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� $�������������������������������������������������������������������������������������������������������昂昂昂昂�
�
��
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� ��� �!�
��
����� ����������� ����� ��������������� ����
����������������� ������ ����������
� � � � � � � � �
���� �� !"���������������������������������������������������������������������������������������������������������������������������昂昂昂昂�����������������������������
�
��������������� ������������������������������ ����������� ������������������
�������� ������������ �!���������"�������� #�������������$�������������������
����% ��#�� �������� �������������������������� ����#��&����������������"�
��������������� $��
�
������� !!#$�%&#"��'%()%*)��������������������������������������������������������������������������������������������������昂昂昂昂����������������������������
�
��������������'('��������������)������ ����������� �!����������*��������� ������$��
���������+,-���.'��������������)��!����- ������� �/������ %�
���������+�01���($��������)��,����� %��� ��� %������� %�$�
���������+�01���($�������)��2������������� ��� ������ %���� ��$�
���������+�01���($34�����)��!�����5�2� %��#��������� ��6���� %�� ��$�
���������0����,7������������)��8����"��� ����������������� %�#�������������� ������� $�
�
����������'"+��,"-�*$!'$ (��������������������������������������������������������������������������������������������������������昂昂昂昂�
�
� -���� )������������������������ ���������������������������� ���
���������������������������������������������������������������������
� ��*�� )� ������� ������$�
�
� 9�� %� )� �+��-�������������
�
������������1 ��� )� �- ��%���"�2� %���92��������� ����������+��-����($��
� �
�
�
�
3� ������"(�./!'%� ��0�1���% � ����2���� 3%(4"�$(�� *+%'�����"5$-$ (��昂昂昂昂�
�� ���� ���� ������66� 3%(4"�$(�� *+%'�����"5$-$ (��
�� !�9� 77� ������6�� 77�
�� !�� ������������:,:�� ��6����78� 77�
���� ��� �,��9� �����,��9� , �� �1 ����
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� "�� �!�
��
�
� �
������������9���%���"� )� �; ��������������� %����� �$�������������� ���"��
������������������������������������������������������������ � %���� "��� %����������������$�
�
������������,��������<� )� ������=%<���%��>��'�
�����������?��+���,�������������������������������
����������������������������������������������$4��=%<���%��>�3���
�����?��+��-����(�$34�
�
2��� (-'*/�'$ (��1%'"*$%#�
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::���
�
�%#5"�� +! ("('� (-'*/�'$ (��� 1%'"*$%#�
� ������ ��";/$*")� � �!"�$<$�%'$ (�
� ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::�
� � ���"� � ���� %� �� +��0�+7��(���@�$�A������������������������
� � � � � � ������������B���� ��$��C��&$D� � �
� �
� � ������ � ������� � +��0�+7��(��@�$�A���
� �
������������:����������������������������������������� �3C���$������<�+���(�@�$�A�����������������
� � � � � � ������������6�����3C���$�E����� %��
� � � � � � �������������B0� $��$(�������� ���D���������������������
� � �
� A�����<�����<�,� ��������������������������������������������3C���$�������B������� %D�������������
�
� ���"�����9� %�� 9� �6���� �3C���$������<�+���(�@�$�A������������������
� � ������������������������������������B����6���<����������������6�����3C���$�E����� %������������������
� � ��������������������������������������6�����D� � �B0� $��$(�������� ���D� �
� � � � ��� � ���������������������������� � � �
������������:����E� %�� � �+��0�+���(�@�$�A���<��
�������������������������������������������������������������������������������������3C���$���������������������
� �
������������E� %��,� � ������ �3C���$�������B������� %D� � �
� �
� ���������������������� � �������������������������������+��0��+7�.3�@�$��F�
� � �
� �������������������� � � �+��0��+7�.4�@�$��E�
�
������%� ����� ������A�� �� ��73�4�6����������������+���������
������������������������������������������������������������������������2�����$��
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� ��� �!�
��
�
����������������������������������3%(4"�$(�+"'%##/*4=�-3%##�( '�&"�!"*+$''")�������������������������������������昂昂昂昂�
�
� �
� �$� ���� � ���"� � ���� �� %� � �� ����� � ������� � ��� ��� ����� �����E�� �6��������E���
�� ���������� ����� ���� �������6�� �����"�������� %� ������$�����������������
� �
� �$� +�������������������������������������� ������,�7�,7(�B�+�173D� ����� ��
�� ����6����� ������������� ����������+���� ������ ���������������4�������
��� %��� ��������� ������(��:2�$���������������������������������������������������������������
� � �
�����������"-'$(4�
� � �
� BD����E"���������
� � � �
� � ����"� )��3���=%<���%�
�
� � ����� )������=%<���%�
� � �����
� ��A������������E"�������������� %�������� �� ������������������ �� �������$���
���������������������+���� �����"�=����� ���"��������������������������� %$�
� ������������������ � � �
B�D��������������������$(� %<�����B � 7���������� %�� ������������������������6�����
���������6���D������������������������������������������������������������������������������������������������������������������昂昂昂昂�
�
� B�D����2� %�������������� �� �����<�������"������������� �������0��7�,7($�
� �
� B�D������������� %��������� ��������+��-���($�� �
�
������������B�D���+������+,-��.'�<����(F���,���-$������ %�/�- ������� ���������� �#����"�/�����
����������C�����������������������������"������ �������$������������������������昂昂昂昂�
� � �
BD����+�����"��������� ��� ������������ %#���������������������� ��� ��������
�������6������� � ��� ��"� ���&��� ��"��������� %� %$�,!�������������� ����� �������
�������������� ������� ������������������������������$�����������������������������������昂昂昂昂�
�
����������������������>()"*�( ��$*�/+-'%(�"�-3%##�%(=� <�'3"�%& 5"�'"-'-�&"�?%$5")� <<������������昂昂昂昂������
���������������������
��������������@��3$*)���%*'=���(-!"�'$ (��������������������������������������������������������������������������昂昂昂昂�����������������������������
�
BD� 0 �������������� ���� %��� ������� ������� � ������� %����������"��
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� ��� �!�
��
�,�G�<�������,��"�- ������� �+%� �"$��
�
�
�
B�D� ����� �������� ����� %��� ����8����"�+���� ���,� ����������"� ���� ������
���"�� ������� �%� �"$��
�
B�D� E�6����#� �,�G� ����� �������� ���� ��%��� ��� ����� ����� ���� ������ �� ���� �����"�
���� ����� �6�����6����� ������ ����� ���������������� ���������"��
��������,�G�- ������� �:������ �$�
�
B�D� +��� ������ ��������� � ���� ����� ���������� � ����� ��� � �������� �"��,-� �� ����
8+,����������"�����#�� ����������6����6��������"��,�G�� �6���� %$�
�
B�D� �,�G�<�������,��"�- ������� ���������� �<�6�� ������������6� %)�
�
�$��������� ������ ���"� � ������� � ����� 6�� ���� �� �����"� ���� ���"� /� �����
�"���������/��������������C������$�
�
��$����������������"�� ������� �� ��� ��������� %����� ��������C���������
�������� �� ���"#� ����� ���� � �������� �� ��� ���� �� ����� ���#� ���"���
6������� ���#�� ��� %���� ���������� ���#����������������� ��� $�
������ �� %��������������� ��� ����� ���������������������� ������������
�"��������������"�� ������� ��� %�6������������������������ ���$���
�
���$� +��� ���������C������������������� ����������������������"$�
�
���� ��������������"��� ������� ������6�� ������������ �"����<���� ������,0-��
�B,�������� ������� ��� ������� D� �� ��� ���� ����� �� ��C� � ����"��
����������������� ����������������$�������� "�������� ������������ �����
��������� ��������������������� #��������������������� �����"�����������
������� � ����� �� �� ��H������ �� ����� �������� ����� ������� � �����
����� �� �����$� ���� ������ ���"� � ������� � ����� ������� � ������� �� ������
� �� %�����,0-�� ������� $��
�
�$� ���� ������ ���"� � ������� � ����� �����6� ���� � 7������ <� ���7��������
�� ��������������/���"�������������������������%� %�� ���6��������
�����������������$��
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� #�� �!�
��
��$� +����������&���������-�9�����������������������"������,-$�������������������������������������������������
�
���������������������������������@������-3%##��( '��&"��?%$5")�� <<��/()"*��%(=���$*�/+-'%(�"����������������������
�
��$�����������%&'()%*%+,-�������������������������������������������������������������������������������������������������������
-����������� ����������������������������������� %��������� ����-�9#�������
� �������� �� �������� �"� ������ ���"� � ������� � ����� � �"� ��� ������ ��� -�9�
������$�0 ��������������� %��������� � ������"������������� �2����---7��
��- �� ��������9�%����� #����"��������� ����� �����% ����"��������- ������� �
+�������"� �������������������� %�6�������������$�
�
7��������A/%#$'=���������������������������������������������������������������������������������������������������������������������昂昂昂昂������������������������������
�
��������������!� ���������� ����� ���� ����������������� ���� "����� %�<�������"����������
��%�$�-������������������� �������"�������� ��������������� ���������������$�
+ "����� %������������ ������� ���H�� ��#�%� ����� ������ %��"��������������
������ ������ � ������� #� ���� ����� ����� �� �� ��H�����$� E�6����� � � � �� %� ��
����� ������� � � � � ���� � ���������� � ���#� ���� � ����� � ����� ��� ��H������ �� ����
� ���������������������������������������$������
�
.�$��� 1%(/<%�'/*"*-���"-'��"*'$<$�%'"��������������������������������������������������������������������������������������
0 ��������6����������������������������������� ����������������� ���� %�����
������ ���� ��� � � �������� �� ������� � � ����� ��� 6���� �� ���� ����������
� ����� %�������������� ��� �������� � ���������"������������������ ��$�
�
� � �����������������������������"��� ������������6� %�� ������ )�
�
� � �$��������������� ������ �����$�
�
� � ��$����,����������������� � ������ ��� �$�
�
���$� 0������������������������������� � ��$�
�
���������������$��E���<�����<������ �$���������������������������������������������������������������������������������������������昂昂昂昂�����������������������������
�������
��������������������������������������$���9���������������������<���"����������$���������������������������������������������������������������昂昂昂昂�
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� !�� �!�
��
���$��E"���������������������������������"#������� �����������������6��������������
�������������"��6��������$������
�
�
���$� -�� ������� ��� ��������0��7�,7��$�
�
�������1%*B$(4�����������������������������������������������������������������������������������������������������������������������昂昂昂昂��������������������������
�
1������������������ �����6������������6� %��������)�
�
���$�����E���<����� �����$���������������
�
���������������$����0������+��0����������� � �����$�������������������
������������������������
����$�����,-�<�-�9������ %$��������
�
���������������$������*��<������
�
����� ��1%'"*$%#� ��"!'%(�"�������������������������������������������������������������������������������������������������昂昂昂昂�
�
����������������������������������������� ��,�G�6��������� �"��������� ��% �� ��������
������������������� ����6������������6� %������� ��$�
�
���$����0 ����������������������� ��� �������$�
� �
��$� ���������"�� ������� �������$�
�
���$������������"�� ������� �������� ���$�����������������������
�
��������������$���;��%� ��-�9������������ �2����---7�����-�9��� ��% �� �$�������������������""""
�
������������������������� ������������,�G�6�������������� �� ��������� %�������H���������
� ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� $��������� "�������� ������������������������� ��������)��'('#�����
���� ������ ������� ���� �"� ���� ������ ����� ��� ��H������ �� ��������� ����� ������� �
�����������������$��
����������������������������������������������������������������������������������������������������
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� ��� �!�
��
����� ����������� ����� ��������������� ����
����������������� ������ ����������
� � � � � � � � �
���� �� !"���������������������������������������������������������������������������������������������������������������������������昂昂昂昂�����������������������������
�
��������������� ������������������������������ ����������� ������������������
�������� �������������� ���������!�������� "�������������#�������������������
����$ ��"�� �������� �������������������������� ����"��%����������������!�
��������������� #��
�
������� !!#$�%&#"��'%()%*)��������������������������������������������������������������������������������������������������昂昂昂昂����������������������������
�
�������������&'('��������������)������ ������������� ����������*��������� ������#��
���������+,-��./'��������������)�� ����- ������� �0������ $�
���������+�12��&(#.�������)��,����� $��� ��� $������� $�#�
���������+�12��&(#&������)��3������������� ��� ������ $���� ��#�
���������+�12��&(#�4�����)�� �����5�3� $��"��������� ��6���� $�� ��#�
���������1����,7..����������)��8����!��� ����������������� $�"�������������� ������� #�
�
����������'"+��,"-�*$!'$ (��������������������������������������������������������������������������������������������������������昂昂昂昂��
� -���� )������������������������ ���������������������������� ���
���������������������������������������������������������������������
� ��*�� )� ������� ������#�
�
� 9�� $� )� �+��-�������������
�
������������2 ��� )� �- ��$���!�3� $���93��������� ����������+��-���&(#.�
� �
�
�� ������"(�./!'%� ��0�1���% � ����2���� 3%(4"�$(�� *+%'�����"5$-$ (��昂昂昂昂�
�� ���� ���� ������66� 3%(4"�$(�� *+%'�����"5$-$ (��
�� �9� 77� ������6�� 77�
�� �� ������������:,:�� ��6����78� 77�
���� ��� �,��9� �����,��9� , �� �1 ����
�
� �
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� "�� �!�
��
�������������
� 9���$���!� )� �; ��������������� $����� �#�������������� ���!��
������������������������������������������������������������ � $���� !��� $����������������#�
�
������������,��������<� )� ��.���=$<���$��>��'�
�����������?��+���,�������������������������������
���������������������������������������������.#(��=$<���$��>�4���
�����?��+��-���&(�#�4�
�
2��� (-'*/�'$ (��1%'"*$%#�
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::���
�
�%#5"�� +! ("('� (-'*/�'$ (��� 1%'"*$%#�
� ������ ��";/$*")� � �!"�$<$�%'$ (�
� ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::�
� � ���!� � ���� $� �� +��1�+7�&(���@�#�A������������������������
� � � � � � ������������B���� ��#�.C��%#D� � �
� �
� � ������ � ������� � +��1�+7�&(��@�#�A���
� �
������������:����������������������������������������� &�C���#������<�+��&(�@�#�A�����������������
� � � � � � ������������6����&�C���#�E����� $��
� � � � � � �������������B1� #�&#(��������� ���D���������������������
� � �
������������A�����<�����<�,� �������������������������������������������&�C���#�������B������� $D�
�
� ���!�����9� $�� 9� �6���� &�C���#������<�+��&(�@�#�A������������������
� � ������������������������������������B����6���<����������������6����&�C���#�E����� $������������������
� � ��������������������������������������6�����D� � �B1� #�&#(��������� ���D� �
� � � � ��� � ���������������������������� � � �
������������:����E� $�� � �+��1�+��&(�@�#�A���<��
������������������������������������������������������������������������������������&�C���#���������������������
� �
������������E� $��,� � ������ &�C���#�������B������� $D� � �
� �
� ���������������������� � �������������������������������+��1��+7&/��@�#��F�
� � �
� �������������������� � � �+��1��+7&/4�@�#��E�
�
������$������� ������A�� �� ��7��4�6����������������+���������
������������������������������������������������������������������������3�����#��
����������������������������������3%(4"�$(�+"'%##/*4=�-3%##�( '�&"�!"*+$''")�������������������������������������昂昂昂昂�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� ��� �!�
��
�
� &#� ���� � ���!� � ���� �� $� � �� ����� � ������� � ��� ��� ����� ��.��E�� �6�����.��E���
�� ���������� ����� ���� �������6�� �����!�������� $� ������#�����������������
� �
� �#� +�������������������������������������� ������,�7�,7(�B�+�27�D� ����� ��
�� ����6������������������� ����������+���� ������ ���������������4�������
��� $��� ���������� ������(��:3�#���������������������������������������������������������������
� � �
�����������"-'$(4�
� � �
� BD����E!���������
� � � �
� � ����!� )��F'��=$<���$�
�
� � ����� )��.F��=$<���$�
� � �����
� ��A������������E!�������������� $�������� �� ������������������ �� �������#���
���������������������+���� �����!�=����� ���!��������������������������� $#�
� ������������������ � � �
B�D�������������������.#(��$<�����B � 7���������� $�� ������������������������6�����
���������6���D������������������������������������������������������������������������������������������������������������������昂昂昂昂�
�
� B�D����3� $�������������� �� �����<�������!������������� �������1��7�,7(#�
� �
� B�D������������� $��������� ��������+��-��&(#.� �
�
������������B�D���+������+,-�./'�<����(F..�,���-#������ $�0�- ������� ���������� �"����!�0�����
�������&��C�����������������������������!������ �������#�������������������������昂昂昂昂�� � �
BD����+�����!��������� ��� ������������ $"���������������������� ��� ��������
�������6������� � ��� ��!� ���%��� ��!����������$� $#�, �������������� ����� �������
�������������� ������� ������������������������������#�������������������������������������昂昂昂昂�
�
����������������������>()"*�( ��$*�/+-'%(�"�-3%##�%(=� <�'3"�%& 5"�'"-'-�&"�?%$5")� <<��������������昂昂昂昂������
���������������������
��������������@��3$*)���%*'=���(-!"�'$ (����������������������������������������������������������������������������昂昂昂昂���������������������������
�
BD� 1 ������������������� $��� ������� ������� � ������� $����������!��
�,�G�<�������,��!�- ������� �+$� �!#��
�
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� #�� �!�
��
�
B�D� ����� �������� ����� $��� ����8����!�+���� ���,� ����������!� ���� ������
���!�� ������� �$� �!#��
�
B�D� E�6����"� �,�G� ����� �������� ���� ��$��� ��� ����� ����� ���� ������ �� ���� �����!�
���� ����� �6�����6����� ������ ����� ���������������� ���������!��
��������,�G�- ������� �:������ �#�
�
B�D� +��� ������ ��������� � ���� ����� ���������� � ����� ��� � �������� �!��,-� �� ����
8+,����������!�����"�� ����������6����6��������!��,�G�� �6���� $#�
�
B�D� �,�G�<�������,��!�- ������� ������������<�6�� ������������6� $)�
�
�#��������� ������ ���!� � ������� � ����� 6�� ���� �� �����!� ���� ���!� 0� �����
�!���������0�����������&��C������#�
�
��#����������������!�� ������� �� ��� ��������� $����� ��������C���������
�������� �� ���!"� ����� ������ �������� �� ��� ���� �� ����� ���"� ���!���
6�������� ���"�� ��� $���� ����������� ���"����������������� ��� #�
������ �� $��������������� ��� ���������������������������� ������������
�!��������������!�� ������� ��� $�6������������������������ ���#���
�
���#� +��� �������.�C������������������������������������������!#�
�
���� ��������������!��� ������� ������6�� ������������ �!����<���� ������,1-��
�B,�������� ������� ��� ������� D� �� ��� ���� ����� �� &�C� � ����!��
����������������� ����������������#�������� !�������� ������������ �����
��������� ��������������������� "��������������������� �����!�����������
������� � ����� �� �� ��H������ �� ����� �������� ����� ������� � �����
����� �� �����#� ���� ������ ���!� � ������� � ����� ������� � ������� �� ������
� �� $�����,1-�� ������� #��
�
�#� ���� ������ ���!� � ������� � ����� �����6� ���� � 7������ <� ���7��������
�� ��������������0���!�������������������������$� $�� ���6��������
�����������������#��
�
��#� +����������%���������-�9�����������������������!������,-#�������������������������������������������������
�
���������������������������������@������-3%##��( '��&"��?%$5")�� <<��/()"*��%(=���$*�/+-'%(�"����������������������
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� ��� �!�
��
�
��$�����������%&'()%*%+,-�������������������������������������������������������������������������������������������������������
-����������� ����������������������������������� $��������� ����-�9"�������
� �������� �� �������� �!� ������ ���!� � ������� � ����� � �!� ��� ������ ��� -�9�
������#�1 ��������������� $��������� � ������!������������� �3����---7��
��- �� ��������9�$����� "����!��������� ����� �����$ ����!��������- ������� �
+�������!� �������������������� $�6�������������#�
�
7��������A/%#$'=���������������������������������������������������������������������������������������������������������������������昂昂昂昂������������������������������
�
�������������� � ���������� ����� ���� ��������������������� !����� $�<�������!����������
��$�#�-������������������� �������!�������� �������������������������������#�
+ !����� $�������������������� ���H�� ��"�$� ����� ������ $��!��������������
������ ������ � ������� "� ���� ����� ����� �� �� ��H�����#� E�6����� � � � �� $� ��
����� ������� � � � � ���� � ���������� � ���"� ���� � ����� � ����� ��� ��H������ �� ����
� ���������������������������������������#������
�
.�$��� 1%(/<%�'/*"*-���"-'��"*'$<$�%'"��������������������������������������������������������������������������������������
1 ��������6����������������������������������� ����������������� ���� $�����
������ ���� ��� � � �������� �� ������� � � ����� ��� 6���� �� ���� ����������
� ����� $�������������� ��� �������� � ���������!������������������ ��#�
�
� � �����������������������������!��� ������������6� $�� ������ )�
�
� � �#��������������� ������ �����#�
�
� � ��#����,����������������� � ������ ��� �#�
�
���#� 1������������������������������� � ��#�
�
���������������#��E���<�����<������ �#���������������������������������������������������������������������������������������������昂昂昂昂������������������������������������
��������������������������������������#���9���������������������<���!����������#���������������������������������������������������������������昂昂昂昂��
���#��E!���������������������������������!"������� �����������������6��������������
�������������!��6��������#������
�
��
��������������
���������������� ���������������������������������
������ ������������ ��� ���������
�����
���������������������� ���������������������� !�� �!�
��
�
���#� -�� ������� ������������1��7�,7�.#�
�
�������1%*B$(4�����������������������������������������������������������������������������������������������������������������������昂昂昂昂��������������������������
�
2������������������ �����6������������6� $��������)�
�
���#�����E���<����� �����#���������������
�
���������������#����1������+��1����������� � �����#�������������������
������������������������
����#�����,-�<�-�9������ $#��������
�
���������������#������*��<������
�
����� ��1%'"*$%#� ��"!'%(�"�������������������������������������������������������������������������������������������������昂昂昂昂��
����������������������������������������� ��,�G�6��������� �!��������� ��$ �� ��������
������������������� ����6������������6� $������� ��#�
�
���#����1 ����������������������� ��� �������#�
� �
��#� ���������!�� ������� �������#�
�
���#������������!�� ������� �������� ���#�����������������������
�
��������������#���;��$� ��-�9������������ �3����---7�����-�9��� ��$ �� �#�������������������""""
�
������������������������� ������������,�G�6�������������� �� ��������� $�������H���������
� ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� #��������� !�������� ������������������������� ��������)�&'('"�����
���� ������ ������� ���� �!� ���� ������ ����� ��� ��H������ �� ��������� ����� ������� �
�����������������#��
����������������������������������������������������������������������������������������������������
�
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ���� ���� ���� ��������
��
����� ��� ��� ��� ���� !�� � ����
�
������������������ ������������������������������������������������������������ �������� ����
�������� ������
�
��� ������� ���
�
�� ������� ����������������������
�
�� ���� � ����� ������ ������� ��������� ��� �� ����� � ����� ��� ����!����� "�#$�� ���
������� ��������� ��%�����
�
�� &������ �������� �������������� ��������� ��%��� �������� ��������� �� ������� ���
����!�������
�
�� '�������� ��� ���� ��������� �� ��� � ��� � ����()�$#*� +�� ��� �������(� )�$#*�
+��
�
�� ������� ��%������ ����� ������� ������ ���� � ����� ��������� ����� ������� �� ���
���������������������� ������
�������������������
�� ���������� ������������ ����� ������ ����� �������!������"� ��� ������� ������
,-.���
�
�� '��� ����������������� ����� ������������ ��������!����������/#�&� ���(0�������
�� ������������� ������� ������������ ����� ���� ����� � �� ���12(34�����567�
��������0888�9��������� ������ �� ���� ����� ��������������!�������������� �����
���� �� ��� ���� �� �� ��� ����� � ����� 8� ��� ����� �������� �� ��� ��� ��� ��������
�� �� ��� �������������� ������ ����� ���� �����5�6��$:)��8� ������������ ��)�
9��� &� �� ��� ��� ��� ��� ���� �� �� /:;� </)� ��(���� ���� ���� ��� $� ��������� ���� �
��������";�<�#��(�����
�
�� 8�� ������� ��� ���� ��� �� ������ �� ��� ����� ��� �� �� �������� %���� <.�=�� ���
������ ���� ������� ����������
�
�� ���������� ������������ ����� ������� ���������� ���� ���.�=��� ����������������
/))>.?�<6�@����
�
�� ���� ���� ������ ������ A������ <��������� �� ��� ����������� ��� �� ��� ��� �))*�
� ����� ����� ��� ����� ���� ���� 1-(#�� ��� �567� �������� 0888� 9��(�� ���
�567��������0��
�
� � � � �
)� �2� ,;6B� /4�)C��)� ������ ��
�� � � ����� ���� ����� �� � �"��
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ���� ���� ���� �#������
��
�� �8�� � ��� ��� �������� B ����� ���� �� ��� ��� ��������� ����� ����� ���� �� ��
��� ������
�
/�� ������� ���
�� ������� ����������������������
�
�� �������� ��������������������������� ������������ ����� ������� ��������� ��%���
�������������
�
�� ������� ��%���� �������������� ������ ���� � ����� ��������� ����� ������� �
� ������������������������� ������
�
�� ���� +������������������������������ �������))�)))������
�
�� ���� ���������� ��� ��������� ��� �� ����� �� ��� ���,-.�� ���������������� ��������
����!�������� �����
�
�� '��� ��� ���� ������ �� �� ����� ��� ��������� ���� ����!����� ����� /#�&� ���(0�
�������� ������������� ������� ������������ ����� ���� ����� � �� ���12(34�
����567���������0888�9��������� ������ �� ���� ����� ��������������!����
���� ���� �� �� ��� ���� �� ��� ���� �� �� ��� ����� � ����� 8� ��� ����� ��������
�� ��� ��� ��� �������� �� �� ��� ���� ���������� ��� ��� ����� ���� ���� �5�6�
�$:)��8� ������������ ��)�9���&��� ��� ��� ������ ������ ��/:;�</)���(��������
�������$���������� ���� ���������";�<�#��(�����
�
�� 8�� ����������������� �� �������� ������������� �� ��������%����<.�=�� ���
������ ���� ������� ����������
�
�� '��������� ������������ ����� ������� ���������� ���� ���.�=��� �������������
���//#�>.?�<6�@����
�
�� ���� ���� ������ ������ A������ <��������� �� ��� ����������� ��� �� ��� ��� �))*�
� ����� ����� ��� ����� ���� ���� 1-(#�� ��� �567� �������� 0888� 9��(�� ���
�567��������0��
�
�� 8�� � ��� ��� �������� B ����� ���� �� ��� ��� ��������� ����� ����� ���� �� ��
��� ������
�
$�� ����� ����� ���
�� -����������� ������������ ��� ����� ������������������������ ��� �����
�
�� '��� ��� ���� ��������� �� ������� �������� ���� ���� �������� �� ��� ��� ����!��� ����
������������������
�
�� �� �������� ���� ���� ����� �� �� $*� ��� �������� �� �� �)*� ��� �������� ��� �����
��� ��� ����������������������� ����� �������
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ���� ���� ���� ��������
��
�
�� '?��� ���������������������������������������������� ������ ����� �������
�
�� ���� ���� ������ ������ A������ <��������� �� ��� ����������� ��� �� ��� ��� �))*�
� ����� ����� ��� ����� ���� ���� 1-(#�� ��� �567� �������� 0888� 9��(�� ���
�567��������0��
� �
�� 8�� � ��� ��� �������� B ����� ���� �� ��� ��� ��������� ����� ����� ���� �� ��
��� ������
�
��� �$�
�
����� ��� ��� � !�� � ���$�
�
����%&'()�*+,,-$��� ����& ������������ ���������� ������������ ��������� ��%������
�� ������������� ������������ ����� ����� �������� ��������+�����/))�>.?��
�
�� >���� ����� ��� ������� � ������� ����������� ��� ����������� ��� ����������� ���
������� � ������ �� ��� ��� ��� ����� ���� ���� �5�6� �/�:�� 5������� ���
����������5$� ���54��� � �������� �������� ��������������������� ���������
����� ���� ���� 655(5,(#$� �+����� �� �� ��� ���� �� ��������������� �� ��� ���
��� ����
�
�� B�� ��� ��� ���� ���������� � ������ �� ��� ��� �������� ��� ������� ��� ���� ���� ����
���������� �����B�� ��������������� ����������������� ��������
�
�� & �������� ����������� ������� ��������4))����'���������� �������
�
�� 9��� ������ ��� ����� ��� ����� �� ��� ��� ��� ����� ���� ���� �5�6� >�C#�
���������>/����������� ����� ������ ������+(3�����567���������0888�������
�
�� &� ����0(��������� ������������������������������ ���� ���� ��< ��� ���/)��(
��������������$<����� ����#���(���� ��$)����'��
�
�� �))*�� ����� �������� ����������� ����� ������+ �� ������
�
�� ���� � ��� � ���� �� ����� ��� ������� ���� �� ���� � ����� ��� �� ��� "))� ��� ��� ����
�� �������+ �������� ����� ���� ����� � �� ����:�/��������:�#���� ������+�
:�����567�57&(0888�980������ ����������� ������� ������ ������
�
�� >����� ������D������ A������ ��� �������� ��+� ��� ��� � ����� �� ��� � ��� �� �
��������� ��� �� ��� �������� �� !� ������� �������567�����0�� ������������
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ���� ���� ���� �.������
��
�������)� <���������������� ������������������+� 80� �� ��������/#*����
���� ��� ����<� ����������� ��!�������������������� ������� ������ ������� ���
�
� � ������� ��������������
������� ?��� ����%�� ,��������� ���
� � 1����$))� C))� 3))��"))� �#))� /#))�
�� 1����/E� $� C� "� �/� �/�
/� $E����CE� C� "� �/� �#� �3�
$� 3E�����CE� "� "� �/� �#� �3�
4� �3E����/4E� "� �/� �#� �3� /��
�
�
����� ������� ������ ������ ! ����?���� ! �������������� �� ���� ���� ! ���� ������������� ��
�)))��D�����������
�
#��--(/�*+,,-$��� �������� ������������ ������� ��������� ��%��� �������������
�
��������������� ������������ ����� ����� �������� ��������+�����//#��
�� >���� ����� ��� ������� � ������� ����������� ��� ����������� ��� ����������� ���
������� � ������ �� ��� ��� ��� ����� ���� ���� �5�6� �/�:�� 5������� ���
����������5$� ���54��� � �������� �������� ��������������������� ���������
����� ���� ���� 655(5,(#$� �+����� �� �� ��� ���� �� ��������������� �� ��� ���
��� ����
�
�� B�� ��� ��� ���� ���������� � ������ �� ��� ��� �������� ��� ������� ��� ���� ���� ����
���������� �����B�� ��������������� ����������������� ��������
�
�� & �������� ����������� ������� ��������4))����'���������� ��������
�
�� ���� �����(���� ������ �� ��� ��� ���� ���� �� �� ��� ���� ����� ������� ���
���������5�������������������������� ������ ������
�
��9��� ������ ��� ����� ��� ����� �� ��� ��� ��� ����� ���� ���� �5�6� >�C#����������>/��8�������� ����� ������ ������+(3�����567���������0888��������
��� ��������������������� ������������� ���))�)))������
�
�� &� ����0(��������� ������������������������������ ���� ���� ��< ��� ���/)��(
��������������$<����� ����#���(���� ��$)����'��
�
�� �))*�� ����� �������� ����������� ����� ������+ �� ������
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ���� ���� ���� ��������
��
�� ���� � ��� � ���� �� ����� ��� ������� ���� �� ���� � ����� ��� �� ��� "))� ��� ��� ����
�� �������+ �������� ����� ���� ����� � �� ����:�/��������:�#���� ������+�
:�����567�57&(0888�980������ ����������� ������� ������ ������
�
�� ����� �������� ��� ��� ��%��� ���� �� �� ��� ��� ���� ��� ���� ����� ����
�������� �������
�
���������������������& ����������/�:�2���-&C���/�:�2���-&"���/�:�2���-&#���/�:�2���&�/�
���������������������'������������3/�2���'��&��/����3/�2���'//&��$����3/�2���'#����3/�2���'"�
�
�� >����� ������D������ A������ ��� �������� ��+� ��� ��� � ����� �� ��� � ��� �� �
��������� ��� �� ��� �������� �� !� ������� �������567�����0�� ������������
�������)� <���������������� ������������������+� 80� �� ��������/#*����
���� ��� ����<� ����������� ��!�������������������� ������� ������ ������� ���
�
� � ������� ��������������
������� ?��� ����%�� ,��������� ���
� � 1����$))� C))� 3))��"))� �#))� /#))�
�� 1����/E� $� C� "� �/� �/�
/� $E����CE� C� "� �/� �#� �3�
$� 3E�����CE� "� "� �/� �#� �3�
4� �3E����/4E� "� �/� �#� �3� /��
�
�
����� ������� ������ ������ ! ����?���� ! �������������� �� ���� ���� ! ���� ������������� ��
�)))��D�����������
�
�
����+%0)-,**�*+,,-$�
��� & ������ ��������� ���� �������� ����� ���������������
�
�� 0 ����� �������� ������������������� ����� ���� ������!���������������
�
�� &����� �� ����� ��� ������� � ����� �������� ����� ���� �������� ����567�>�C�$4�
�� ������� ����� ����� ����� ��������5�6�744C�<����/E���!���� ���������>�
�&� �����/�� � �������&>��&��&9� �����$�� �������9�>��'� ��������� ���� ���
����!�����/E����4�#E���� � ������ ��������5�6�7��3C��� ������������5�6�
7"4� ����5�6�7�4/��� �������������������������� ������ ���������������
� ��������� ����� ���� ���������
�
�� ���� ������� ��� ��� ��� ��� � ������� �� ��� ��� ���� ������ ��� ���������� �����
���!������
�
�
�
��������������
�>���� ��� A�������������
����� �����>A�� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ���� ���� ���� ��������
��
�� B�� ��� ��� ���� ���������� � ������ �� ��� ��� �������� ��� ������� ��� ���� ���� ����
���������� �����B�� ��������������� ����������������� ��������
�
�� B�� ��� ����� �� ��� ��� �))*� � ����� ����� ��� �� � ���� ��� ����� ���� ����
� � �� ���$44�#�����567�>$���� ��������� ������� ������ ��������)�"#��
���������� ������������ ������ �������5�6�7�C#����������>/�� ��������� �����
�������������+(3��567(0888��������
�
�� >����� ������D������ A������ ��� �������� ��+� ��� ��� � ����� �� ��� � ��� �� �
��������� ��� �� ��� �������� �� !� ������� �������567�����0�� ������������
�������)� <���������������� ������������������+� 80� �� ��������/#*����
���� ��� ����<� ����������� ��!�������������������� ������� ������ ������� ���
�
�
� � ������� ��������������
������� ?��� ����%�� ,��������� ���
� � 1����$))� C))� 3))��"))� �#))� /#))�
�� 1����/E� $� C� "� �/� �/�
/� $E����CE� C� "� �/� �#� �3�
$� 3E�����CE� "� "� �/� �#� �3�
4� �3E����/4E� "� �/� �#� �3� /��
�
�
����� ������� ������ ������ ! ����?���� ! �������������� �� ���� ���� ! ���� ������������� ��
�)))��D�����������
�
� � �
,1,&,)2,*$��
�� 7+�� ������������78FD&.70B�?D1�,��������� � �� ����������� ����
�
�
�
�
�
�
�
�
�
�
�
�
�
�
��������������
���� � � ��� ��� � ����������
����� ��������� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������������ ����� ���������
��
��
������������������ ����������������� �����������
�������������������������������������������������������������������������������������������������������������������
�
���� � !"#��������������������������������������������������������������������������������������������������������������������昂昂昂昂�
�
����� ���������� � ������� ���� �������� ��������� ������� �����������������������
������ ������ ��� !����� � ��� ������ ��"� #� ����� �������$� ���� � ������ ����� "��
����� ��#�� �������� ��������������������"����� ����#��%���������������"��
��������������� $�
���
$��� ""%& '(%#��)'*+',+��������������������������������������������������������������������������������������������昂昂昂昂�
�
�&'�(�)��*�������� ��#� ��"��+�����,�!����������-���.&��/�� ��������$�
�
�&'�01���*��!����' ������� �+������ �$�
�
���� �)#-���#. ,&")&!*��������������������������������������������������������������������������������������������������昂昂昂昂�
�
� '���� *��������������������������������#��������������2� ����,��
� � � 2�������� ������� ���"������"� ��$�
� ���-������������������������������*�����������������.&��
�����
������������3�� �� *� �.�'������������4�
� �
� 5 ��� *� ' ��� ����������������.�'���6��$)�$�7.&�8�9���
� ������ ���������,����2��������.�'�6��($������$�����������������������������������
� �
� &���������9� *� �:;$1�<�9��)������)�����$���$��=����������&'�(�)����
� ����������� � 1;$1�<�9��)�������/������$��$��=����������������������������������������
� �
� �
� �
�� ����� ��� �� �� ��� ������������������
�� ���� ���� �� �� ��� � ���!�"������#��$%�% ���攻�
�� &�������������� '� �� �� ��� ������'�
�� &�� (�(� �� �� �)� ������'�
����� ������������ ����������� ����� ��������
�
�
��������������
���� � � ��� ��� � ����������
����� ��������� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������������ ����� $��������
��
��
/��� �!*.),0 )&!*�1���')#,&'%�
�������������222222222222222222222222222222222222222222222222222222222222222222�
��������������'%3#� !-"!*#*)� ���������!*.),0 )&!*� � �')#,&'%��"# &4& ')&!*�
� � ������������#50&,#+�
�������������222222222222222222222222222222222222222222222222222222222222222222�
� 6���� ����������>���?��)�� �$��
����������������������������������������������������������������������������������������������������0��9� �$��1������������������������昂昂昂昂�
�
� ���������6� ��� ����������6������ ���>���?��)�� �$��0�9�
��������������������������������������������������������������������������������������������������� �$��1��������������������������������昂昂昂昂��
����������������� 3��� ���:@���$��������7.��
������������������������������������������������������������������������������������������������������� �8�A�� ����)���A6�>� $�
� �
������������B�������������������������������������������������������������� �:@���$���������������������������攻攻攻攻��
� 6��������3� �� ����������3� �2"��� �:@���$���������������������������攻攻攻攻���
��������������������������������������������7����2���9������
���������������������������������������������������2�����8� �
� � � �
A ��B����� ����������3��� �� ���������������>���"����'�� ����>��?::���9�����������������
��������������������������������������������������������������������������������������?)�(�B�6�9��?��0�9��C���������������������
�������������������������������������������������������������������������������������'�� ��?0:(�9��'����(0�� �$��
�������������������������������������������������������������������������������������/���9��)��
��������������������������������������������������������������������������������������'(,& ')#+�6'*+�76##%.�',#��
��������������������������������������������������������������������������������������*!)���' #")'(%#�� ���������攻攻攻攻��
6� ���9� � ��6����� � ������������������������������������������������>���?�1:��� �$�6;�
� � � � �
6� ���9� � ��.���� � ������������������������������������������������>���?��1/�� �$�)A�
�
�����&�,� �� ����������3� �2"���2������������������>�����"�������������������
����������������������������������������������������� �� �������������������"�������2��������"���
� ���������������� ����������������������� �� ��"����$������������攻攻攻攻�� � ������ � �
6� ��� �,��� ����������������B�� �� �����������������'�'?:�/��D�,���������������
�����������������������������������������������72������������?���������������2�� ���2���������������
���������������������������������������������?�� ����� ����8���������������������"�������������
� � ������ � � �
�
�
��������������
���� � � ��� ��� � ����������
����� ��������� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������������ ����� ���������
��
������������222222222222222222222222222222222222222222222222222222222222222222���������������'%3#� !-"!*#*)� ���������!*.),0 )&!*� � �')#,&'%��"# &4& ')&!*�
� � ������������#50&,#+�
�������������222222222222222222222222222222222222222222222222222222222222222222��
�,������������� ���� � � �)0���3A��%$���������������昂昂昂昂��
E�,�� � � �����������������>���?���)�� �$��0�9��
������������������������������������������������������������������������������������� �$��1�������������������������������昂昂昂昂�����������������������������
E�,��������� � ��������������������������������������������&��������6�� -��7B������8����������������������������������
����������������������������������������������������������������������������������������.�?3�����$����>���/:1��
������������������������������������������������������������������������������������� �$�C)������������������������������攻攻攻攻�� �
E�,��.��� � � �����������������>���?�1/�� �$��)A�
�
� ��������
����������������6'*8#�&*�-#)'%%0,89�.6'%%�*!)�(#�"#,-&))#+�0*%#..�-#*)&!*#+�&*�)6#������昂昂昂昂�
�
�$����������� ���� ���������������������� �����������"���)0���A6���� ������2������
�������0��A6��� $������ �����"��2�� ������� �� ���������������������������������攻攻攻攻�����
���������������
��������������)$��������������������������"��������"�������������� ������&�?�&?(7.��5?:8� �����
���������������������� � � �� ����2����",��� ���� ������ ���������� ���� ������ �� ����"��� ��� ���
/������$������ ���� ���������, ������(��C��$�B����������"���� �����������
������� ������� ���'63������$��������������������������������������������������������������������昂昂昂昂�
��������������������
���� �#.)&*8���
� 78����A����������
� � ��6������������������*���)���<�9��)�������
�����������������������������������������*����0)�<�9��)�������������������������������������������������������������������������攻攻攻攻����
���������������������6�,������������*����0)�<�9��)����������� � � ��� ����������������������������������
��������������
� � B������������A��������������� ��������� �� ������"����������� �' ��"����$��
����� �������<����� �����"������������������������� �$�
� � ������������ �
�������������7"8������������������0$0�,�9��)���72������������������� �2���$8�������������������������攻攻攻攻�
� �
� �7�8������������&'�01������� ��+�' ������� ���������� �#�6����9�����+�6�,������
�������������������������������@������������"�������������"������� �������$��������������������������昂昂昂昂��
�
�
��������������
���� � � ��� ��� � ����������
����� ��������� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������������ ����� /��������
��
�������������7�8������������������� ��� ������������ �#����������������"����� ��� ���������
����������������������2�������� ��� ���� ���%��� ����"�������,�� �$�&!���������������������������
����������������������"�������������� �"����� ���������������������� ��� ������������������$����昂昂昂昂��������������������������������������
�����������������������*+#,�*!� &, 0-.)'* #�.6'%%�'*9�!4�)6#�'(!3#�)#.).�(#�7'&3#+�!44��������������昂昂昂昂�
����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
������������������1��6&,+���',)9���*."# )&!*����������������������������������������������������������������������������昂昂昂昂��
78� > ��������������,���� ���� ������� ������� � ������� ����������"���
6&�F�9�������&����' ������� ���� ��$��
�
7"8� ����� ���������������������G����������� ���&� ���������"������������
������ ������� ��� ��$��
�
7�8� A�2����#�6&�F� ����� �������� ���� ������ �������� ����� ���� �������� �����������
���� ����� �2�����2����� ������ ����� ���������������� ��������"���
�������6&�F�' ������� �C������ �$�
�
7�8� ���������� ���������� ���� ��������������� � �����"�� � ��������"���&'�������
G�&���������"������#�� ����������2����2�������"��6&�F�� �2���� �$�
�
7�8� 6&�F�9�������&����' ������� ����������,�9�2�� ������������2� �*�
�
�$��������������������� ������� ������2�� ���� �������������6����9�����9�6�,���
���������������+��������������@������$����������
��$� � ����� ����������� � ������� �� �� � ��������� ������ ������)�@�����
�������������� ����#� ����� ����,��������� �� ��� ���� �� ����� ������
����#��� ��"�%#� �� �� ����2���#�2����#������� D�� �#���� ������ ����
����#� � ����"���� 9�"� ���2��� ����, ���#� � �����,����������� �������#�
���,��� ����������� ���� �����2�������, ���#�������������� ��� $�
����� �� ������������� ��� �����,������"����������� ����"�������"��
���� ������ ����� � ������� � �� �� 2���� ���� �������� ������� ���$� � � ��
������� � ��� �������� ����� ������ ��� ��� � � ��������������� � ������"��
��D�����$� ' � ���� ����� ���� ��� ��� ���� � � � ����� ���������� #� �&'� (�)�
���������� $�
�
���$� ���� �������0�@������������"������,�����������������"�����$�
�
�
�
�
��������������
���� � � ��� ��� � ����������
����� ��������� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������������ ����� ���������
��
�
��$� �!����� � �������� �� �������� "�� ������ ����� � ������� � ����� � ��� "��
���������'63�������$��
�
�$� ������������������� ������� ������2�� ������������ ������9���� ������&>'��
7&������������������ ������� 8�������������������@�� ���������������
������ �� ���� ��������� ���$� ������� �� ������� � ��� ��� ����� ����
��������� �����&'�(�)������������������� #��������������������� ����"��
���� ������ ������� � ����� �� �� ��D������ �� ���� � �������� �����
��"����������"�����������$�
�
��$� ����������������� ������� �����������2������ ������9�������������� �������
��������+������������������������������� ��� ���2����������������
���������$��
�
���$� ������������%���������'63������������"���������"�������&'$�������������������������������������������������
�
����������������������������������1������.6'%%��*!)��(#��7'&3#+��!44��0*+#,��'*9�� &, 0-.)'* #����������������������
�
:��������;0'%&)9����������������������������������������������������������������������������������������������������������������昂昂昂昂�������
������������!� ���������� ��������� ��������������������� ������ ��9�����"������������
����$�'�������"����������� ��"������������� ���������������,���������������$�
� ������ �������������,�����"� ���D�� ��#��� ����� ������ ������������������
������"������ ������� #����������������� ����D�����$�A�2������ �� �� ���������
��������� ���������������������#�����������������"����D������ ������� ��������������
��������������������������������������$������
�
��$��� �'*04' )0,#,.���#.)���#,)&4& ')#��� � > ��������2�����������������������������"���������������������� ���� ������
������ ���� "�� � � �������� �� ������� � � ����� ��� 2���� �� ���� ����������
� ����� ��������������� ��� �������� � ���������������������������� ��$�
�
� � ��������������������������������� ������������2� ��� ������ *�
�
� � �$��������������� ��"��� �����$�
�
� � ��$����&����������������� � ������ ��� �$�
�
� � ���$���>������������������������������� � ��$�
�
�
��������������
���� � � ��� ��� � ����������
����� ��������� ��� ���������� ������
�� ����������������� �
�������� ���� ����� ������������������ ����� ���������
��
�
���������������$��A���9�����9�"���� �$����������������������������������������������������������������������������������昂昂昂昂��������
��������$���3���������������������9��������������$����������������������������������������������������昂昂昂昂""""�
� ��$���A�������������������������������"���#�������+��"�,������� ��������������
������������������������2������������������������������2��������$���������������������������������攻攻攻攻��� �
����$�'�� ������� ���,���������&'�(�)$��������������������������������������������������������攻攻攻攻��
�
<����������',=&*8�����������������������������������������������������������������������������������������������������������昂昂昂昂��
5�������������"���� �����2������������2� ���������*�
�
���$�����A���9����� ��"��$���������������
�
���������������$����>���������>����������� � ��"��$�������������������
������������������������
����$�����&'�9�'63������ �$��������
�
���������������$������-��9������
�
������ �')#,&'%� #")'* #����������������������������������������������������������������������������������������昂昂昂昂��
���������������� ������ ����� "�� ��������� � � 6&�F� 2�������� � ��� �� ���� �� ��� �� �� ���
����� ����2������������2� �������� ��$�
�
�$����> ����������������������� ��� ���"���$�
� �
��$� ������������ ������� �������$�
�
���$��������������� ������� �������� ���$�����������������������
�
��������������$���H���� ��'63������������ ������'''?�����'63��� ��� �� �$�������������������昂昂昂昂""""
�
������������������������� �����������6&�F�2�������������� �� ��������� ��"����"D������
��� � ������� � �� ����� ��� �� ���� ���� ���� ���� ������ ���� ��������� �� �� �����
���������� $�����������������������������������������������������������������������������������������������������昂昂昂昂��
� �����
�
����������������� ���������������������������������
������������������ ��� ���������
������
���������������������� ��������������������� ������
��
��� ��� �������� ���� ���������������������������������������� ��
���� �����������!�� �����"#$���� ���#� ����������� ��������� ����� �� ��������� �������������������������������� ����
�� ��������� ������� �� ����������� �� ��� ���� �� ���� ������� !!�� � � "��� ��������#$%�� �� & �� �� '�� ����('��������� ��)����������*�����+ ,#�� �� (��� �� �� �*�������+#!�� �� (������-�.� �� /0������ �������)������ 1��� ����2� �� 3!�����4�2��3����5���3%�!��,� 6�����-��
� "��-������ � +!,7��4�2��3����5���8!!�!��,������6����*������+ ,87� 昂昂昂昂� ����#� ����������� ��� �������
�%&'(�� )*+),(,-��
),.-/01-2),���(302/(4��
�%-(/2%&���+(12521%-2),�
�
���.� ���� �� ��"0����3+ ���,�9���:���� ��� �� ���!,3#;��0�<,=��
昂昂昂昂�
�� ��� ���>�������� ��"0����3+ ���,�9����
�
����� '������:�� �=��: ������ �=�
��"0����+ $������.���� +8!!�� �
�
���
���66��
�������
��"�#��77�
�
�)/*%-�18%,9(�:��('2.2),��昂昂昂昂�
�� ���� �� � �;�#;�7<� �%2,-2,9�/(302/(*(,-�/('2.(4��
�� �6�� ��� �;�#��7"� �)4=�.(%-�/2,9�8%/4,(..�/('2.(4��
#� ���� ���� �#�#;�7�� ���
����� ������������ ����������� ����� �����6��
��
� �����
�
����������������� ���������������������������������
������������������ ��� ���������
������
���������������������� ��������������������� ������
��
9����� ������:���� 2�'��<����=�
���� ����� ���� �� �������"0� ��+7%� ����.� ��$##!!,�:9�����)������������������� ���)��� �����+$!�?�=�@��
�
���.������ �� '�<��2(� ������� ��"0� �� A� +7%� ����.� ��$##!!�:?�� ��3!!�?����� ����=�@��
�
?� ��9����� � 0��������� �� � ��"0� �� 88%2���"0� ��3+ � �,� 9��2� '���������� �� +!#� 2� �������� �� �����"0� �� #8 � � �,� !�7!�+%� � ���� #�7#�+32����+% #��:��7!!2+3=,����@��%>/21%-(4��%,4?8((&.� %/(�,)-��%11(+-%>&(�� � �
�
�昂昂昂昂�
�� �������� � ��"0����+$8��,�B��
�
��� ������� � ��"0����+$8���,��B��
昂昂昂昂�
�� ��C���� ���*����
� ��"0���+$7���,�3?��
昂昂昂昂�
�� �����D��� � ��'� �� *��-� �� (����� +2%1���D,��##���� !��������,��
�
��������D� �� (� ��������������������-� �� ��������
�"'&� ��-�� ����� ������-��D� �2���-����,�
�
E�D�� � ��"0����3+ ���,�9���:���� ��� �� ���!,3#;���<,=��
昂昂昂昂�
E�D��������� � 9������ ���-��� �� ������+7!!������.����3,��
�
E�D��*��� � ��"0����+$7���,�3?��
�
� � � �� ��@��(%-�-/(%-�25�/(302/(4��������
� �����
�
����������������� ���������������������������������
������������������ ��� ���������
������
���������������������� ��������������������� ������
��
�� ����A�
� �� +,� "��� ���� �� ����� ��� )��� )��� � F����� ��)���,� � "��� �)���� �)� ����
���� ����������)���)���)����� �� ��� ������������� ���.������,�� �� 3,� ���� ������ ����� ��� ���� ������� �� -�� ��� ���� �������� � :�*��&�8=�
� �� ��� � � -�� ��������� ���� ����� �)� 8#��'"� ����D �� ����� ����� ������G� ��-��-�����-����)���������.� ����������)�3#��'"�����D �������
� �������� �������-�� �,� 昂昂昂昂�� � �� 8,� ����������������A�� � �
� %�� @�?.���������"��� 昂昂昂昂�
� � � �� ���.� ����8!�4�2��3��� ����� ����33�4�2��3��� ���D������� ����33�4�2��3����������� � � ��� ��
� >�� � �������� 昂昂昂昂��� � ������:� �������=�� ����#, ��4�2��3�� �� �� ������������ @� 9���� ���� )�� ?.�������� ���� �� ����� �� ��� � ��������������
����� � � ������,� � ���� ������.� 4��� �� ��.� ��� ���� )���-�������� �,�
� ������������������ � � �� 7,� '�� ��������������� �� ���2�-����������)����)� ������0������ ,�� � �� #,� ����-��������� ��-� ����� ���-������� � � ������ �� �)� ���� �������)���
�.� ��� ��-��������-����,��� ,� ������ +71� � �� ������ ����� ��� -������� ����� �������� ������ ����
�-����� �������� ����������-��������� �����,��� ���� B,� '(&��� � ���)����������.�� �� ��2����������,���������������������-��
���-� .���� ������������*�,++,�:������-������������)� ���� ��,H,=� � �
������
� �����
�
����������������� ���������������������������������
������������������ ��� ���������
������
���������������������� ��������������������� ������
��
��#��� ������ �����B��������� ������ ������ � 0� �)������ ����� ����� ���� �)� ������ ����� ������ �� ���� ����)������
�� )��� �� ����� ���� ���� ������ ����� ��� � �� �)������� � �� ������ � ������� ���������� ������-�������� ����� �������������� ��� ������� �� ����������.����������I����� �,�
�� � "�����������)����������������.�)� �������)������ ��� )������ ���� +,� ����)������ ������ ������,��� 3,� �����������-��� �� ������ �� ,��� 8,� ?�� ���)�����������������)�����������������-� � �,���� 7,� ?.������������-����)�����.>�����J����D������ ��- ������������
)���������������������������������)������.���������,��� #,� ��� ��)������ ���D���-��0������3#,�� ���#� ������������C������������ +,� �82/4��%/-=��,.+(1-2),��� � �)� �� ������ � � ���� -������ ���>� ���� �� �)������ ����� �� ���
� -����� � � �� ���� �� �)� ���� ������ �����.� �� -�� ���� #$%� � �� ���������-��� ��� ��� ���� -���)������ � ������� ���� ���K� �--����� -���)������� �.,�
�
"�#� � ����� ����������� ����������� 昂昂昂昂�
�� � � (� ������-���)���������������)���������������� ����K�9������>������
���� -�������.����K�� -�����)��)������ ������ ������� � � "��� ������>� ���� �� ��� ����D>� (��� �>� (������ �)� � -����� � ����)�����>�
� ��������D�)�����������)������ �����������������.�� ��.�>���� ���)������ ��� �������>��� ������ ��)��� ������>���� ��-��D� �����,�
�� � � �������� .�-����� �)�����������������I����� ���)����� !!>���������������
�-�� �����.�������-������������F������� ���--�����������������)����������)������,�
�
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 1 of 101
51001
51001
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4 TESTING SHALL BE AS PER API 598
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
SOLID
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
INTEGRAL
O.S & Y.
BODY : 2975 PSIG.
80 PSIG
ASTM A 105
ASTM A 105
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316 - CA F1LLER
MAX TEMP. 427 DEG. C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 API-602RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.25" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A10A, A11A, A13A, A1A, A20A,A32A, A33A, A3A, A6A, A9A,B13A, B1A, B32A, B6A, B9A,D1A
Tag No: 51001
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 2 of 101
51002
51002
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
6
7
TESTING SHALL BE AS PER API 598 & IBR.
ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
ALL VALVES SHALL BE PAINTED RED ON BODY-BONNET JOINT.
VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
SOLID
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
I.B.R
INTEGRAL
O.S & Y.
BODY : 2975 PSIG.
80 PSIG
ASTM A 105
ASTM A 105
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316 - CA F1LLER
STEAM/CONDENSATE/BOILER FEED WATER;
MAX TEMP. 427 DEG. C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 API-602RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A2A, B2A, D2A
Tag No: 51002
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 4 of 101
51004
51004
TAG NO. :
SHEET REV. NO.
DATE 14/12/2000 28/05/2001
3 4
NOTES
4
5
TESTING SHALL BE AS PER API 598.
VALVES SHALL MEET THE REQUIREMENTS FOR HYDROGEN SERVICE AS SPECIFIED IN 'TECHNICAL NOTES
FOR VALVES'.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
SOLID
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
H2
INTEGRAL
O.S & Y.
BODY : 2975 PSIG.
80 PSIG
ASTM A 105
ASTM A 105
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR.INHIB.& INCONEL WIRE
REINFORCEMENT
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316 - CA FILLER.
MAX TEMP 260 DEG.C.
SEAT : 2175 PSIG.
Sheet No. 1 of 1
800 API-602RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A5A, B5A, D5A
Tag No: 51004
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 7 of 101
51011
51011
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 31/12/2001
2 3 4 5
NOTES
4
5
TESTING SHALL BE AS PER API 598.
NACE REQUIREMENTS SHALL BE AS PER MR0175.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
SOLID
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
NACE
INTEGRAL
O.S & Y.
BODY : 2975 PSIG
80 PSIG
ASTM A 105
ASTM A 105
SS 316L (NO CASTING)
SS 316L FACING/SS 316L
SS 316L FACING/SS 316L
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7M
ASTM A194 GR 2HM
SP WND SS316L - CA FILLER.
SOUR SERVICE (MAX TEMP 427 DEG.C.)
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 API-602RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A16A, B16A
Tag No: 51011
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 9 of 101
51024
51024
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4 TESTING SHALL BE AS PER API 598.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
SOLID
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
INTEGRAL
O.S & Y.
BODY : 2975 PSIG
80 PSIG
ASTM A 105
ASTM A 105
13% CR.STEEL (NO CASTING)
13% CR.STEEL FACING/13%
CR.STEEL/STELLITED
13% CR.STEEL FACING/13%
CR.STEEL/STELLITED
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316 - CA FILLER
MAX TEMP 75 DEG. C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 API-602RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SCRF 3000 TO B-1.20.1
PIPING CLASS : J3A
Tag No: 51024
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 17 of 101
51036
51036
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 06/08/2002
2 3 4 5
NOTES
4 TESTING SHALL BE AS PER API 598.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
SOLID
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
INTEGRAL
O.S & Y.
BODY : 3000 PSIG
80 PSIG
ASTM A 182 GR.F5
ASTM A 182 GR.F5
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
GRAFOIL DIE MOLDED RINGS WITH
SACRIFICIAL CORROSION INHIBITOR
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B16
ASTM A194 GR 4/GR7
SP WND SS316-GRAFOIL FILLER
MAX TEMP 538 DEG.C.
SEAT : 2200 PSIG
Sheet No. 1 of 1
800 API-602RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A4F, B3F, B4F
Tag No: 51036
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 19 of 101
51045
51045
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4 TESTING SHALL BE AS PER API 598.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
SOLID
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
INTEGRAL
O.S & Y.
BODY : 2900 PSIG
80 PSIG
ASTM A 182 GR.F304
ASTM A 182 GR.F304
SS 304 (NO CASTING)
STELLITED
STELLITED
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR.2H
SP WND SS316-GRAFOIL FILLER
MAX TEMP 454 DEG.C.
SEAT : 2125 PSIG
Sheet No. 1 of 1
800 API-602RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A1K, A3K, B1K, D1K
Tag No: 51045
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 23 of 101
51061
51061
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 16/04/2002
2 3 4 5
NOTES
4 TESTING SHALL BE AS PER API 598.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
SOLID
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
INTEGRAL
O.S & Y.
BODY : 2900 PSIG
80 PSIG
ASTM A 182 GR.F316
ASTM A 182 GR.F316
SS 316 (NO CASTING)
STELLITED
STELLITED
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
MAX TEMP 427 DEG.C.
SEAT : 2125 PSIG
Sheet No. 1 of 1
800 API-602RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A1M, B1M
Tag No: 51061
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 34 of 101
51301
51301
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
6
TESTING SHALL BE AS PER API 598 FOR SIZES UPTO 24" AND AS PER BS 6755(PART-1) FOR SIZES 26" & ABO VE.
GATE VALVES OF SIZE 26" AND ABOVE SHALL BE IN ACCORDANCE WITH BS-1414 AND FLANGE E NDS SHALL
BE IN ACCORDANCE WITH ASME B16.47 SERIES B.
5% VALVE CASTINGS UPTO 24" AND 100% VALVE CASTINGS 26" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
SOLID/FLEXIBLE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
O.S & Y.
BODY : 450 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
13% CR STEEL FACING/13% CR. STEEL
13% CR STEEL FACING/13% CR. STEEL
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER/CORRUGATED SOFT
IRON
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 371 DEG.C.
13% CR STEEL
SEAT : 325 PSIG
Sheet No. 1 of 1
150 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 42.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : A10A, A11A, A13A, A1A, A20A,A32A, A6A, A9A
Tag No: 51301
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 35 of 101
51302
51302
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
67
8
9
TESTING SHALL BE AS PER API 598 & IBR FOR SIZES UPTO 24" AND AS PER BS 6755(PART-1) & IBR FOR SIZES
26" & ABOVE.
ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
ALL VALVES SHALL BE PAINTED RED ON BODY-BONNET JOINT.5% VALVE CASTINGS UPTO 24" AND 100% VALVE CASTINGS 26" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
GATE VALVES OF SIZE 26" AND ABOVE SHALL BE IN ACCORDANCE WITH BS-1414 AND FLANGE E NDS SHALL
BE IN ACCORDANCE WITH ASME B16.47 SERIES B.
VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
SOLID/FLEXIBLE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
I.B.R
O.S & Y.
BODY : 450 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
13% CR STEEL FACING/13% CR. STEEL
13% CR STEEL FACING/13% CR. STEEL
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER/CORRUGATED SOFT
IRON
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
STEAM/CONDENSATE/BOILER FEED WATER;
MAX. TEMP. 371 DEG.C.
13% CR STEEL
SEAT : 325 PSIG
Sheet No. 1 of 1
150 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 36.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : A2A
Tag No: 51302
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 41 of 101
51313
51313
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
TESTING SHALL BE AS PER API 598.
50% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
SOLID/FLEXIBLE
RENEWABLE/NON-
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
O.S & Y.
BODY : 450 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
SS 304 (NO CASTING)
SS 304
SS 304
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIBITOR & INCONEL WIRE
REINFORCEMENT.
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR.B7
ASTM A194 GR.2H
SP WND SS316-CA FILLER/CORRUGATED SS316
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
CAUSTIC SERVICE (MAX.TEMP.110 DEG.C) &
AMINE;
SS 304
SEAT : 325 PSIG
Sheet No. 1 of 1
150 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : A19A
Tag No: 51313
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 42 of 101
51321
51321
TAG NO. :
SHEET REV. NO.
DATE 14/12/2000 28/05/2001
3 4
NOTES
4
5
TESTING SHALL BE AS PER API 598.
RADIOGRAPHY OF VALVE CASTINGS NOT REQUIRED.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
SOLID/FLEXIBLE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
O.S & Y.
BODY : 450 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
13% CR STEEL FACING/13% CR. STEEL
13% CR STEEL FACING/13% CR. STEEL
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER/CORRUGATED SOFT
IRON
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
13% CR STEEL
SEAT : 325 PSIG
Sheet No. 1 of 1
150 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : A33A, A3A
Tag No: 51321
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 47 of 101
51336
51336
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
TESTING SHALL BE AS PER API 598.
10 % VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
FLEXIBLE
RENEWABLE/NON-
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
O.S & Y.
BODY : 450 PSIG
80 PSIG
ASTM A 217 GR.C5 (NORM. & TEMP.)
ASTM A 217 GR.C5 (NORM. & TEMP.)
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT.
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B16
ASTM A194 GR.4/GR7
SP WND SS316-CA FILLER/CORRUGATED SS316
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 371 DEG.C.
13% CR STEEL
SEAT : 325 PSIG
Sheet No. 1 of 1
150 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : A4F
Tag No: 51336
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 49 of 101
51345
51345
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
67
TESTING SHALL BE AS PER API 598.
10 % VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
ALL CASTINGS SHALL BE SOLUTION HEAT TREATED. WELD REPAIRS, IF ANY, SHALL BE CARRIED OUT BEFORE SOLUTION HEAT TREATMENT.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
SOLID/FLEXIBLE
RENEWABLE/NON-
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
O.S & Y.
BODY : 425 PSIG
80 PSIG
ASTM A 351 GR CF8
ASTM A 351 GR.CF8
SS 304 (NO CASTING)
SS 304
SS 304
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER/CORRUGATED SS316
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 371 DEG.C.
SS 304
SEAT : 325 PSIG
Sheet No. 1 of 1
150 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : A1K
Tag No: 51345
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 58 of 101
51401
51401
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
TESTING SHALL BE AS PER API 598.
10% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
FLEXIBLE/SOLID
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
O.S & Y.
BODY : 1125 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
13% CR STEEL FACING/13% CR. STEEL
13% CR STEEL FACING/13% CR. STEEL
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT.
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 427 DEG.C.
13% CR STEEL
SEAT : 825 PSIG
Sheet No. 1 of 1
300 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : B13A, B1A, B32A, B6A, B9A
Tag No: 51401
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 59 of 101
51402
51402
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
67
8
TESTING SHALL BE AS PER API 598 AND IBR
ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
ALL VALVES SHALL BE PAINTED RED ON BODY-BONNET JOINT.10% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
SOLID/FLEXIBLE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
I.B.R
O.S & Y.
BODY : 1125 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
13% CR STEEL FACING/13% CR. STEEL
13% CR STEEL FACING/13% CR. STEEL
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT.
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
STEAM/CONDENSATE/BOILER FEED WATER;
MAX. TEMP. 427 DEG.C.
13% CR STEEL
SEAT : 825 PSIG
Sheet No. 1 of 1
300 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : B2A
Tag No: 51402
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 68 of 101
51436
51436
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 06/08/2002
2 3 4 5
NOTES
4
5
TESTING SHALL BE AS PER API 598.
10% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
FLEXIBLE
RENEWABLE/NON-
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
O.S & Y.
BODY : 1125 PSIG
80 PSIG
ASTM A 217 GR.C5 (NORM. & TEMP.)
ASTM A 217 GR.C5 (NORM. & TEMP.)
13% CR.STEEL (NO CASTING),
STELLITED
STELLITED
GRAFOIL DIE MOLDED RINGS WITH
SACRIFICIAL CORROSION INHIBITOR
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B16
ASTM A194 GR 4/GR 7
SP WND SS316-GRAFOIL FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 538 DEG.C.
13 % CR STEEL
SEAT : 825 PSIG
Sheet No. 1 of 1
300 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : B3F, B4F
Tag No: 51436
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 79 of 101
51501
51501
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
TESTING SHALL BE AS PER API 598.
100% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
FLEXIBLE/SOLID
RENEWABLE/NON-
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
O.S & Y.
BODY : 2225 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT.
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 427 DEG.C.
13% CR STEEL
SEAT : 1650 PSIG
Sheet No. 1 of 1
600 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : D1A
Tag No: 51501
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 80 of 101
51502
51502
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
67
8
TESTING SHALL BE AS PER API 598 AND IBR
ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
ALL VALVES SHALL BE PAINTED RED ON BODY-BONNET JOINT.100% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
SOLID/FLEXIBLE
RENEWABLE/NON-
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
I.B.R
O.S & Y.
BODY : 2225 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT.
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
STEAM/CONDENSATE/BOILER FEED WATER;
MAX. TEMP. 427 DEG.C.
13% CR STEEL
SEAT : 1650 PSIG
Sheet No. 1 of 1
600 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : D2A
Tag No: 51502
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 1 of 97
52001
52001
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4 TESTING SHALL BE AS PER BS 6755 (PART-1).
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
LOOSE PLUG TYPE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
INTEGRAL
BODY : 2975 PSIG
80 PSIG
ASTM A 105
ASTM A 105
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIBITOR & INCONEL WIRE
REINFORCEMENT.
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER
MAX TEMP 427 DEG.C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS-5352RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.25" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A10A, A11A, A13A, A1A, A20A,A32A, A33A, A3A, A6A, A9A,B13A, B1A, B32A, B6A, B9A,D1A
Tag No: 52001
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 2 of 97
52002
52002
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
45
6
7
TESTING SHALL BE AS PER BS 6755(PART-1) & IBR. ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
ALL VALVES SHALL BE PAINTED RED ON BODY-BONNET JOINT.
VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO.
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
LOOSE PLUG TYPE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
I.B.R
INTEGRAL
BODY : 2975 PSIG
80 PSIG
ASTM A 105
ASTM A 105
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIBITOR & INCONEL WIRE
REINFORCEMENT.
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316 WITH CA FILLER
STEAM/CONDENSATE/BOILER FEED WATER;
MAX TEMP. 427 DEG.C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS-5352RATING :
SIZE RANGE : ENDS :
12
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A2A, B2A, D2A
Tag No: 52002
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 34 of 97
52301
52301
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
45
TESTING SHALL BE AS PER BS 6755 (PART-1).5% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
LOOSE PLUG
TYPE/BALL TYP
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
BODY : 450 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
13% CR STEEL FACING/13% CR STEEL
13% CR STEEL FACING/13% CR STEEL
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT.
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER/ CORRUGATED SOFT
IRON
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 371 DEG. C.
13% CR STEEL
SEAT : 325 PSIG
Sheet No. 1 of 1
150 BS-1873RATING :
SIZE RANGE : ENDS :
12
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 16.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : A10A, A11A, A13A, A1A, A20A,A6A, A9A
Tag No: 52301
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 57 of 97
52401
52401
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
TESTING SHALL BE AS PER BS 6755 (PART-1).
10% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
LOOSE PLUG
TYPE/BALL TYP
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
BODY : 1125 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
13% CR STEEL FACING/13% CR STEEL
13% CR STEEL FACING/13% CR STEEL
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT.
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 427 DEG.C.
13% CR STEEL
SEAT : 825 PSIG
Sheet No. 1 of 1
300 BS-1873RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 12.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : B13A, B1A, B6A, B9A
Tag No: 52401
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 67 of 97
52436
52436
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 06/08/2002
2 3 4 5
NOTES
4
5
TESTING SHALL BE AS PER BS 6755 (PART-1).
10% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
LOOSE PLUG
TYPE/BALL TYP
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
BODY : 1125 PSIG
80 PSIG
ASTM A 217 GR.C5 (NORM. & TEMP.)
ASTM A 217 GR.C5 (NORM. & TEMP.)
13% CR.STEEL (NO CASTING), 32 RMS FINISH
STELLITED
STELLITED
GRAFOIL DIE MOLDED RINGS WITH
SACRIFICIAL CORROSION INHIBITOR
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B16
ASTM A194 GR 4 /GR.7
SP WND SS316-GRAFOIL FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 538 DEG. C.
13 % CR STEEL
SEAT : 825 PSIG
Sheet No. 1 of 1
300 BS-1873RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 12.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : B3F, B4F
Tag No: 52436
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 78 of 97
52501
52501
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
TESTING SHALL BE AS PER BS 6755 (PART-1).
100% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
LOOSE PLUG
TYPE/BALL TYP
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
BODY : 2225 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
GRAPHITED ASBESTOS WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT.
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 427 DEG C.
13% CR STEEL
SEAT : 1650 PSIG
Sheet No. 1 of 1
600 BS-1873RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 12.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : D1A
Tag No: 52501
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 1 of 101
53001
53001
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
TESTING SHALL BE AS PER BS 6755 (PART-I).
VALVES SHALL BE OF STANDARD BORE DESIGN.
BODY
COVER
DISC/PISTON
BODY SEAT RING
DISC HINGE/HINGE
PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
TYPE
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RENEWABLE/NON
RENEWABLE
LIFT CHECK TYPE
BODY : 2975 PSIG
ASTM A 105
ASTM A 105
STELLITED
STELLITED
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER
MAX TEMP 427 DEG.C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS-5352RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.25" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A10A, A11A, A13A, A1A, A20A,A32A, A33A, A3A, A6A, A9A,B13A, B1A, B32A, B6A, B9A,D1A
Tag No: 53001
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 2 of 101
53002
53002
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
6
7
8
TESTING SHALL BE AS PER BS 6755(PART-I)& IBR
ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
ALL VALVES SHALL BE PAINTED RED ON BODY-COVER JOINT.
VALVES SHALL BE OF STANDARD BORE DESIGN.
VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO.
BODY
COVER
DISC/PISTON
BODY SEAT RING
DISC HINGE/HINGE
PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
TYPE
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RENEWABLE/NON
RENEWABLE
LIFT CHECK TYPE
I.B.R
BODY : 2975 PSIG
ASTM A 105
ASTM A 105
STELLITED
STELLITED
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER
STEAM/CONDENSATE/BOILER FEED WATER;
MAX. TEMP. 427 DEG.C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS-5352RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A2A, B2A, D2A
Tag No: 53002
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 8 of 101
53013
53013
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 23/10/2003
2 3 4 5
NOTES
4
5
TESTING SHALL BE AS PER BS 6755(PART-1)
VALVES SHALL BE OF STANDARD BORE DESIGN.
BODY
COVER
DISC/PISTON
BODY SEAT RING
DISC HINGE/HINGE
PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
TYPE
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RENEWABLE/NON-
RENEWABLE
LIFT CHECK TYPE
BODY : 2975 PSIG
ASTM A 105
ASTM A 105
SS304+STELLITED
SS304+STELLITED
ASTM A194 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER
CAUSTIC SERVICE(MAX.TEMP.110 DEG.C) &
AMINE
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS-5352RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A19A, B19A
Tag No: 53013
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 23 of 101
53061
53061
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 16/04/2002
2 3 4 5
NOTES
4
5
TESTING SHALL BE AS PER BS 6755 (PART-I)
VALVES SHALL BE OF STANDARD BORE DESIGN.
BODY
COVER
DISC/PISTON
BODY SEAT RING
DISC HINGE/HINGE
PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
TYPE
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
NON-
RENEWABLE/RENE
WABLE
LIFT CHECK TYPE
BODY : 2900 PSIG
ASTM A 182 GR.F316
ASTM A 182 GR.F316
STELLITED
STELLITED
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
MAX TEMP 427 DEG.C.
SEAT : 2125 PSIG
Sheet No. 1 of 1
800 BS-5352RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A1M, B1M
Tag No: 53061
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 34 of 101
53301
53301
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
TESTING SHALL BE AS PER BS 6755 (PART-I).
5% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
BODY
COVER
DISC
BODY SEAT RING
DISC HINGE
HINGE PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
BY PASSES
TYPE
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RENEWABLE/NON
RENEWABLE
SWING CHECK TYPE
BODY : 450 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
FACED WITH 13% CR.STEEL/13% CR.STEEL
13% CR STEEL FACING/13% CR STEEL
13% CR STEEL/A216 GR WCB/A515 GR 70;
13% CR STEEL(NO CASTING)
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER/CORRUGATED SOFT
IRON
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 371 DEG. C.
13% CR STEEL(NO CASTING)/SS410/SS304
SEAT : 325 PSIG
Sheet No. 1 of 1
150 BS 1868RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : A10A, A11A, A13A, A1A, A20A,A32A, A6A, A9A
Tag No: 53301
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 40 of 101
53311
53311
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 22/03/2002
2 3 4 5
NOTES
4
5
6
TESTING SHALL BE AS PER BS 6755(PART-1)
50% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
NACE REQUIREMENTS SHALL BE AS PER MR0175.
BODY
COVER
DISC
BODY SEAT RING
DISC HINGE
HINGE PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
BY PASSES
TYPE
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RENEWABLE/NON
RENEWABLE
SWING CHECK TYPE
NACE
BODY : 450 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
FACED WITH SS 316L/SS 316L
FACED WITH SS316L/SS 316L
SS 316L/A 216 GR.WCB
SS316L (NO CASTING)
ASTM A193 GR B7M
ASTM A194 GR 2HM
SP WND SS316L-CA FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
SOUR SERVICE; MAX TEMP 371 DEG. C.
SEAT : 325 PSIG
Sheet No. 1 of 1
150 BS-1868RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : A16A
Tag No: 53311
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 61 of 101
53401
53401
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
TESTING SHALL BE AS PER BS 6755 (PART-I).
10% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
BODY
COVER
DISC
BODY SEAT RING
DISC HINGE
HINGE PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
BY PASSES
TYPE
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RENEWABLE/NON
RENEWABLE
SWING CHECK TYPE
BODY : 1125 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
FACED WITH 13% CR.STEEL/13% CR.STEEL
13% CR STEEL FACING/13% CR STEEL
13% CR STEEL/A216 GR WCB/A515 GR. 70;
13% CR STEEL(NO CASTING)
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 427 DEG. C.
13% CR STEEL(NO CASTING)/ SS 410/SS 304
SEAT : 825 PSIG
Sheet No. 1 of 1
300 BS-1868RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : B13A, B1A, B32A, B6A, B9A
Tag No: 53401
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 62 of 101
53402
53402
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001
2 3 4
NOTES
4
5
6
7
8
TESTING SHALL BE AS PER BS 6755(PART-I)& IBR
ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
ALL VALVES SHALL BE PAINTED RED ON BODY-COVER JOINT.
10% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO.
BODY
COVER
DISC
BODY SEAT RING
DISC HINGE
HINGE PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
BY PASSES
TYPE
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RENEWABLE/NON
RENEWABLE
SWING CHECK TYPE
I.B.R
BODY : 1125 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR STEEL FACING/13% CR. STEEL
13% CR STEEL FACING/13% CR. STEEL
13% CR. STEEL/A216 GR WCB/A515 GR 70;
13% CR STEEL(NO CASTING)
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-CA FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
STEAM/CONDENSATE/BOILER FEED WATER;
MAX TEMP. 427 DEG.C.
13% CR STEEL(NO CASTING)/SS 410/SS 304
SEAT : 825 PSIG
Sheet No. 1 of 1
300 BS-1868RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : B2A
Tag No: 53402
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 5
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 71 of 101
53436
53436
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 06/03/2002
2 3 4 5
NOTES
4
5
TESTING SHALL BE AS PER BS 6755 (PART-I).
10% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
BODY
COVER
DISC
BODY SEAT RING
DISC HINGE
HINGE PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
BY PASSES
TYPE
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RENEWABLE/NON-
RENEWABLE
SWING CHECK TYPE
BODY : 1125 PSIG
ASTM A 217 GR.C5 (NORM. & TEMP.)
ASTM A 217 GR.C5 (NORM. & TEMP.)
STELLITED
STELLITED
13% CR STEEL/A217 GR C5(NORM.&TEMP.);
13% CR STEEL(NO CASTING)
ASTM A 193 GR B16
ASTM A 194 GR 4/GR 7
SP WND SS316-GRAFOIL FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 538 DEG. C.
13% CR STEEL (NO CASTING)
SEAT : 825 PSIG
Sheet No. 1 of 1
300 BS-1868RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : B3F, B4F
Tag No: 53436
VALVE MATERIAL
SPECIFICATION
BPCL-KRClient :
CEMP PHASE - IIProject :
KOCHILocation :
16/43Dept./Sect. :
JOB SPECIFICATION NO.
6767-6-44-0006 Rev. 0
Copyright EIL-All rights reservedTemplate No. 5-0000-0001-T2 Rev. 1
Page 65 of 390
51504
51504
TAG NO. :
SHEET REV. NO.
DATE 19/02/2007
0
NOTES
4
5
6
TESTING SHALL BE AS PER API 598.
100% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
VALVE SHALL MEET THE REQUIREMENT FOR HYDROGEN SERVICE AS SPECIFIED IN 'TECHNICAL NOTES FOR
VALVES'
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
FLEXIBLE/SOLID
RENEWABLE/NON-
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
O.S & Y.
BODY : 2225 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 230 DEG.C.(H2 SERVICE)
13% CR STEEL
SEAT : 1650 PSIG
Sheet No. 1 of 1
600 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : D25A, D5A, D95A
Tag No: 51504
VALVE MATERIAL
SPECIFICATION
BPCL-KRClient :
CEMP PHASE - IIProject :
KOCHILocation :
16/43Dept./Sect. :
JOB SPECIFICATION NO.
6767-6-44-0006 Rev. 0
Copyright EIL-All rights reservedTemplate No. 5-0000-0001-T2 Rev. 1
Page 111 of 390
51946
51946
TAG NO. :
SHEET REV. NO.
DATE 24/10/2008
0
NOTES
4
5
6
7
8
TESTING SHALL BE AS PER API 598 AND IBR
ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
ALL VALVES SHALL BE PAINTED RED ON BODY-BONNET JOINT.
10% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
SOLID/FLEXIBLE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
I.B.R
O.S & Y.
BODY : 1125 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
SS316 (NO CASTING)
SS316
SS316
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
STEAM/CONDENSATE/BOILER FEED WATER;
MAX. TEMP. 427 DEG.C.
SS316
SEAT : 825 PSIG
Sheet No. 1 of 1
300 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : B2A
Tag No: 51946
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 116 of 415
52004
52004
TAG NO. :
SHEET REV. NO.
DATE 14/12/2000 28/05/2001 30/06/2009
3 4 5
NOTES
4
5
VALVES SHALL MEET THE REQUIREMENTS FOR HYDROGEN SERVICE AS SPECIFIED IN 'TECHNICAL NOTES
FOR VALVES'.
VALVES AS PER BS-5352 AND TESTING AS PER BS 6755(PART-I) ARE ALSO ACCEPTABLE.
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
LOOSE PLUG TYPE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
H2
INTEGRAL
BODY : 2975 PSIG
80 PSIG
ASTM A 105
ASTM A 105
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316 WITH GRAFOIL FILLER
MAX TEMP 260 DEG.C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS EN ISO 15761RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A5A, B5A, D5A
Tag No: 52004
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 133 of 415
52061
52061
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 16/04/2002 30/06/2009
2 3 4 5 6
NOTES
4 VALVES AS PER BS-5352 AND TESTING AS PER BS 6755(PART-I) ARE ALSO ACCEPTABLE.
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
LOOSE PLUG TYPE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
INTEGRAL
BODY : 2900 PSIG
80 PSIG
ASTM A 182 GR.F316
ASTM A 182 GR.F316
SS 316 (NO CASTING)
STELLITED
STELLITED
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
MAX TEMP 427 DEG.C.
SEAT : 2125 PSIG
Sheet No. 1 of 1
800 BS EN ISO 15761RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A1M, B1M
Tag No: 52061
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 169 of 415
52402
52402
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009
2 3 4 5
NOTES
4
5
6
7
8
9
TESTING SHALL BE AS PER BS EN 12266-1 & IBR.
ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
ALL VALVES SHALL BE PAINTED RED ON BODY-BONNET JOINT.
10% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO.
VALVE TESTING AS PER BS 6755 (PART-I) & IBR IS ALSO ACCEPTABLE.
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
LOOSE PLUG
TYPE/BALL TYP
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
I.B.R
BODY : 1125 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
13% CR STEEL FACING/13% CR. STEEL
13% CR STEEL FACING/13% CR. STEEL
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
STEAM/CONDENSATE/BOILER FEED WATER;
MAX. TEMP. 427 DEG.C.
13% CR STEEL
SEAT : 825 PSIG
Sheet No. 1 of 1
300 BS-1873RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 12.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : B2A
Tag No: 52402
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 219 of 415
53004
53004
TAG NO. :
SHEET REV. NO.
DATE 14/12/2000 28/05/2001 30/06/2009
3 4 5
NOTES
4
5
6
VALVES SHALL BE OF STANDARD BORE DESIGN.
VALVES SHALL MEET THE REQUIREMENTS FOR HYDROGEN SERVICE AS SPECIFIED IN 'TECHNICAL NOTES
FOR VALVES'.
VALVES AS PER BS-5352 AND TESTING AS PER BS 6755(PART-I) IS ALSO ACCEPTABLE .
BODY
COVER
DISC/PISTON
BODY SEAT RING
DISC HINGE/HINGE
PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
TYPE
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RENEWABLE/NON
RENEWABLE
LIFT CHECK TYPE
H2
BODY : 2975 PSIG
ASTM A 105
ASTM A 105
STELLITED
STELLITED
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
MAX TEMP 260 DEG.C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS EN ISO 15761RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS : A5A, B5A, D5A
Tag No: 53004
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 224 of 415
53024
53024
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009
2 3 4 5
NOTES
4
5
VALVES SHALL BE OF STANDARD BORE DESIGN.
VALVES AS PER BS-5352 AND TESTING AS PER BS 6755(PART-I) IS ALSO ACCEPTABLE .
BODY
COVER
DISC/PISTON
BODY SEAT RING
DISC HINGE/HINGE
PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
TYPE
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RENEWABLE
LIFT CHECK TYPE
BODY : 2975 PSIG
ASTM A 105
ASTM A 105
13% CR.STEEL FACING / 13% CR.STEEL
13%CR FACING/13%CR/13%CR+STEL
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS EN ISO 15761RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SCRF 3000 TO B-1.20.1
PIPING CLASS : J3A
Tag No: 53024
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 257 of 415
53321
53321
TAG NO. :
SHEET REV. NO.
DATE 14/12/2000 28/05/2001 30/06/2009
3 4 5
NOTES
4
5
6
TESTING SHALL BE AS PER BS EN 12266-1.
RADIOGRAPHY OF VALVE CASTINGS NOT REQUIRED.
VALVE TESTING AS PER BS 6755 (PART-I) IS ALSO ACCEPTABLE.
BODY
COVER
DISC
BODY SEAT RING
HINGE PIN
DISC HINGE
COVER STUD BOLT
COVER NUT
COVER GASKET
BY PASSES
TYPE
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RENEWABLE/NON
RENEWABLE
SWING CHECK TYPE
BODY : 450 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
FACED WITH 13% CR.STEEL/13% CR.STEEL
13% CR STEEL FACING/13% CR STEEL
13% CR STEEL(NO CASTING)
13% CR STEEL/A216 GR WCB/A515 GR 70
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER/CORRUGATED
SS316
13% CR STEEL(NO CASTING)/SS410/SS304
SEAT : 325 PSIG
Sheet No. 1 of 1
150 BS 1868RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS : A33A, A3A
Tag No: 53321
Corporate Office : 22/23, Goodwill Premises, Swastik Estate, 178 CST Road, Kalina, Santacruz (E), Mumbai-400 098, Maharashtra, India.
Tel: +91-22-26507777-82, 42200900, 30608900-4 Fax : +91-22-422 00933 E-mail : [email protected]
Ahmedabad : B-218, Supath-II Complex, Near Juna Vadaj Bus Stand, Usmanpura-Vadaj, Ahme dabad - 380 013, Gujarat, India
Tel: +91-079-32202865 / 27552585 Email : [email protected]
Tel : +91-265-2466653 / 6979 / 3202067 E-mail : [email protected]
Bangalore : Jala Chambers, 2nd Floor, Kumara Krupa Road, Bangalore, Karnataka - 560001, India.
Belgaum : No. 629, Rabindranath Tagore Road, Hindu Nagar, Tilakwadi, Belga um - 590 006, Karnataka, India.
Tel : +91-831-2443141 / +91-9341370107 E-mail : ics_belgaum@ics asian.com
Chennai : Badri Brindavanam, Plot No.G-2, 6th Cross Street, Brindavan Nagar, Valasa ravakkam, Chennai - 600087,Tamil Nadu
Tel : +91-44-32933080 Email : [email protected]
Delhi : Office No. 1001/1015, Roots Tower, District Centre, Laxmi Nagar, Near Radhu Palace Theatre, Delhi - 110 092, India
Tel : +91-11-22042106 / 7, 32619498 E-mail : ics_delhi@icsasian .com
Hyderabad : 68-B, Vengal Rao Nagar, Hyderabad - 500 038, AP. Tel : +91-40-237133 35 / 32006086 Email : [email protected]
Indore : 201, Princess Pride, Near Janjir-wala Chouraha, 21/3, New Palasia, Ind ore - 452001, Madhya Pradesh, India.
Tel : +91-731-4076365 / 4274458 / 3208791 Email : [email protected]
Jaipur : 210, Jamuna Towers, 2nd Floor, 13, Govind Marg, Adarsh Nagar, Jaipur - 302004, Rajasthan, India.
Tel : +91-141-2610291 / 3114405 Email : [email protected]
Kanpur : M.I.G-142, B-Block, Panki, Kanpur - 208 020, UP. Tel : +91-512-2262648 / 3268996 Email : [email protected]
Kerala : Mercy Villa, 1st Floor, BNRA-174, Bhagawathy Nagar, Kowdiar Post, Trivandrum - 695003, Kerala, India
Tel : 09349158920 E-mail : [email protected]
Kolhapur : 33B, Gr. Floor, Subhedar Ramaji Ambedkar Society, Vichare Mal, Kolhapur - 416003, Maharashtra, India.
Tel : +91-231-2653722 / +91-9373107108 E-mail : [email protected]
Kolkata : 157, Jodhpur Garden, G-2, Kolkata-700045, WB. Tel: +91-33-32542986 / +91-9339227221 Email : [email protected]
Ludhiana : C-108, Shri Ram Plaza, 1st Floor, Phase V, Focal Point, Ludhiana - 141010, Punjab, India.
Tel : +91-161-3230461 / 5050336-7 / 4626578 E-mail : [email protected]
Mumbai : 22/23, Goodwill, Swastik Estate, 178 CST Road, Kalina, Santacruz (E), Mumbai-400 098, Maharashtra, India.
Tel: +91-22-26507777-82, 42200900, 30608900-4 Fax : +91-22-422 00933 , E-mail : [email protected]
Nashik : Plot No. P-48, MIDC Satpur, Near Hotel Radhakrishna, Nashik - 422 007 , Maharashtra, India
Tel : +91-253-2357777 / 3205994 Email : [email protected]
Tel : +91-712-3292174 / +91-9326175990 E-mail : ics_nagpur@icsas ian.com.
Orissa : Gopabandhu Nagar, Hillpatna, Behrampur (GM), Orissa - 760005. Te l : 9338024838, E-mail : [email protected]
International Certification Services - Offices & Branches
Baroda: 41, Dhanlaxmi Complex, Opp. Mangalaya Hall, Harni Road, Vadoda ra - 390 022, Gujarat, India
Tel : +91-80-22384620 / 1, 32002136. Email : [email protected]
Nagpur : Plot No.107, Lokhande Nagar, Near Gopal Nagar, Behind Datta Mandi r, Nagpur � 440 022, Maharashtra, India
Aurangabad : B-4, Ekta Colony near Himayath Baugh, Aurangabad-431001, Maharas htra, Tel : 9324122436, E-mail : [email protected]
PDF created with pdfFactory Pro trial version www.pdffactory.com
Pune : 10, Asawari Apartment, 3rd Floor, Above Dwarka Hospital, Near Kothrud Bus Depot, Paud Road, Pune - 411038, Maharashtra India.
Tel :+91-20-32305304 / 25280119 / 25280125. Email : [email protected]
Surat : 32, Bhagya Laxmi, Row House, Koliwad, Adajan Gam, Surat, Guj. Tel: 0261-2730980/9374658606 E-mail: [email protected]
Udaipur : 33-B, Shakti Nagar, Udaipur - 313 001, Rajasthan. Tel: +91-294-252203 1/2410759 / 934116813, Email : [email protected]
Vapi : 319/320, Heena Arcade, 3rd Fl, Nr. Vapi Char Rasta, Vapi (E)-396195, Guj. Tel: 0260-3291135/2423812 Email: [email protected]
Dubai (UAE) : Khalid Bin Al Walid Road (Bank Street), Kwality Restaurant Building, 4t h Floor, Flat 401-A, Bur Dubai, Dubai, UAE,
Tel: +971-4-3933343 E-mail : [email protected]
Kathmandu (Nepal) : Bhansar Marg, Teku, G.P.O. Box 23473, Kathmandu, Nepal. Tel : +9771-4233656 E-mail : ics_nepal@ icsasian.com
Muscat (Oman) : Al Mashoor Building, 2nd Floor, Flat No.21, Next to Old Boat Roundabout, Al Ghubra, Muscat, Sultanate of Oman
Tel : +90-216-4188170 / +90-216-4818172 E-mail : ics_turkey@icsas ian.com
Colombo (Sri Lanka) : 165/1/1, Castle Street, Colombo 8, Sri Lanka.
Tel: +94-11-2678165 / 4936156 E-mail : [email protected] , [email protected]
Doha (Qatar) : Al Daicel International Services Co. (W.L.L.), E-mail : [email protected]
Kiev (Ukraine) : International Certification Services, E-mail : [email protected]
Romania : SC International Certification Services SRL, E-mail : [email protected]
Shenzhen (China) : E-mail : [email protected]
USA : 126, Juliet Circle, Cary, NC 27513, USA Tel : +1-919-2616990 E-mail : [email protected]
Iran : No.201, Unit No.2, Dastgerdi St., Shariati Ave., Tehran, Tehran Province, IRAN P.C. 1919819113, E-mail : [email protected]
Raipur : E-mail : [email protected], [email protected] , Tel : 9300704410
Overseas Branches
Web : www.icspl.org as on 24.02.2011
Tel : +968-24499785 E-mail : [email protected]
Turkey (Istanbul) : Ataturk Mah. Alemdag Cd. No:105/9, Koyunlu Is Markezi, Umraniye, Istanbul, Turkey
PDF created with pdfFactory Pro trial version www.pdffactory.com
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 116 of 415
52004
52004
TAG NO. :
SHEET REV. NO.
DATE 14/12/2000 28/05/2001 30/06/2009
3 4 5
NOTES
4
5
VALVES SHALL MEET THE REQUIREMENTS FOR HYDROGEN SERVICE AS SPECIFIED IN 'TECHNICAL NOTES
FOR VALVES'.
VALVES AS PER BS-5352 AND TESTING AS PER BS 6755(PART-I) ARE ALSO ACCEPTABLE.
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
LOOSE PLUG TYPE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
H2
INTEGRAL
BODY : 2975 PSIG
80 PSIG
ASTM A 105
ASTM A 105
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316 WITH GRAFOIL FILLER
MAX TEMP 260 DEG.C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS EN ISO 15761RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS :A5A, B5A, D5A
Tag No: 52004
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 219 of 415
53004
53004
TAG NO. :
SHEET REV. NO.
DATE 14/12/2000 28/05/2001 30/06/2009
3 4 5
NOTES
4
5
6
VALVES SHALL BE OF STANDARD BORE DESIGN.
VALVES SHALL MEET THE REQUIREMENTS FOR HYDROGEN SERVICE AS SPECIFIED IN 'TECHNICAL NOTES
FOR VALVES'.
VALVES AS PER BS-5352 AND TESTING AS PER BS 6755(PART-I) IS ALSO ACCEPTABLE .
BODY
COVER
DISC/PISTON
BODY SEAT RING
DISC HINGE/HINGE
PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
TYPE
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RENEWABLE/NON
RENEWABLE
LIFT CHECK TYPE
H2
BODY : 2975 PSIG
ASTM A 105
ASTM A 105
STELLITED
STELLITED
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
MAX TEMP 260 DEG.C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS EN ISO 15761RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS :A5A, B5A, D5A
Tag No: 53004
VALVE MATERIAL
SPECIFICATION
BPCL-KRClient :
CEMP PHASE - IIProject :
KOCHILocation :
16/43Dept./Sect. :
JOB SPECIFICATION NO.
6767-6-44-0006 Rev. 0
Copyright EIL-All rights reservedTemplate No. 5-0000-0001-T2 Rev. 1
Page 65 of 390
51504
51504
TAG NO. :
SHEET REV. NO.
DATE 19/02/2007
0
NOTES
4
5
6
TESTING SHALL BE AS PER API 598.
100% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
VALVE SHALL MEET THE REQUIREMENT FOR HYDROGEN SERVICE AS SPECIFIED IN 'TECHNICAL NOTES FOR
VALVES'
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
FLEXIBLE/SOLID
RENEWABLE/NON-
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
O.S & Y.
BODY : 2225 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 230 DEG.C.(H2 SERVICE)
13% CR STEEL
SEAT : 1650 PSIG
Sheet No. 1 of 1
600 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS :D25A, D5A, D95A
Tag No: 51504
VALVE MATERIAL
SPECIFICATION
BPCL-KRClient :
CEMP PHASE - IIProject :
KOCHILocation :
16/43Dept./Sect. :
JOB SPECIFICATION NO.
6767-6-44-0006 Rev. 0
Copyright EIL-All rights reservedTemplate No. 5-0000-0001-T2 Rev. 1
Page 111 of 390
51946
51946
TAG NO. :
SHEET REV. NO.
DATE 24/10/2008
0
NOTES
4
5
6
7
8
TESTING SHALL BE AS PER API 598 AND IBR
ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
ALL VALVES SHALL BE PAINTED RED ON BODY-BONNET JOINT.
10% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
SOLID/FLEXIBLE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
I.B.R
O.S & Y.
BODY : 1125 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
SS316 (NO CASTING)
SS316
SS316
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
STEAM/CONDENSATE/BOILER FEED WATER;
MAX. TEMP. 427 DEG.C.
SS316
SEAT : 825 PSIG
Sheet No. 1 of 1
300 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS :B2A
Tag No: 51946
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 116 of 415
52004
52004
TAG NO. :
SHEET REV. NO.
DATE 14/12/2000 28/05/2001 30/06/2009
3 4 5
NOTES
4
5
VALVES SHALL MEET THE REQUIREMENTS FOR HYDROGEN SERVICE AS SPECIFIED IN 'TECHNICAL NOTES
FOR VALVES'.
VALVES AS PER BS-5352 AND TESTING AS PER BS 6755(PART-I) ARE ALSO ACCEPTABLE.
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
LOOSE PLUG TYPE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
H2
INTEGRAL
BODY : 2975 PSIG
80 PSIG
ASTM A 105
ASTM A 105
13% CR.STEEL (NO CASTING)
STELLITED
STELLITED
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316 WITH GRAFOIL FILLER
MAX TEMP 260 DEG.C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS EN ISO 15761RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS :A5A, B5A, D5A
Tag No: 52004
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 133 of 415
52061
52061
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 16/04/2002 30/06/2009
2 3 4 5 6
NOTES
4 VALVES AS PER BS-5352 AND TESTING AS PER BS 6755(PART-I) ARE ALSO ACCEPTABLE.
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
LOOSE PLUG TYPE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
INTEGRAL
BODY : 2900 PSIG
80 PSIG
ASTM A 182 GR.F316
ASTM A 182 GR.F316
SS 316 (NO CASTING)
STELLITED
STELLITED
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
MAX TEMP 427 DEG.C.
SEAT : 2125 PSIG
Sheet No. 1 of 1
800 BS EN ISO 15761RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS :A1M, B1M
Tag No: 52061
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 169 of 415
52402
52402
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009
2 3 4 5
NOTES
4
5
6
7
8
9
TESTING SHALL BE AS PER BS EN 12266-1 & IBR.
ALL VALVES SHALL BE SUPPLIED WITH IBR CERTIFICATE IN FORM-III C.
ALL VALVES SHALL BE PAINTED RED ON BODY-BONNET JOINT.
10% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
VALVES TO COMPLY WITH DESIGN REQUIREMENTS OF IBR ALSO.
VALVE TESTING AS PER BS 6755 (PART-I) & IBR IS ALSO ACCEPTABLE.
BODY
BONNET
STEM
DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITION
BACK SEAT &
SHOULDER
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
LOOSE PLUG
TYPE/BALL TYP
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
RISING
O S & Y
I.B.R
BODY : 1125 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
13% CR.STEEL (NO CASTING)
13% CR STEEL FACING/13% CR. STEEL
13% CR STEEL FACING/13% CR. STEEL
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
STEAM/CONDENSATE/BOILER FEED WATER;
MAX. TEMP. 427 DEG.C.
13% CR STEEL
SEAT : 825 PSIG
Sheet No. 1 of 1
300 BS-1873RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GLOBE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 12.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS :B2A
Tag No: 52402
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 219 of 415
53004
53004
TAG NO. :
SHEET REV. NO.
DATE 14/12/2000 28/05/2001 30/06/2009
3 4 5
NOTES
4
5
6
VALVES SHALL BE OF STANDARD BORE DESIGN.
VALVES SHALL MEET THE REQUIREMENTS FOR HYDROGEN SERVICE AS SPECIFIED IN 'TECHNICAL NOTES
FOR VALVES'.
VALVES AS PER BS-5352 AND TESTING AS PER BS 6755(PART-I) IS ALSO ACCEPTABLE .
BODY
COVER
DISC/PISTON
BODY SEAT RING
DISC HINGE/HINGE
PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
TYPE
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RENEWABLE/NON
RENEWABLE
LIFT CHECK TYPE
H2
BODY : 2975 PSIG
ASTM A 105
ASTM A 105
STELLITED
STELLITED
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
MAX TEMP 260 DEG.C.
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS EN ISO 15761RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS :A5A, B5A, D5A
Tag No: 53004
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 224 of 415
53024
53024
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009
2 3 4 5
NOTES
4
5
VALVES SHALL BE OF STANDARD BORE DESIGN.
VALVES AS PER BS-5352 AND TESTING AS PER BS 6755(PART-I) IS ALSO ACCEPTABLE .
BODY
COVER
DISC/PISTON
BODY SEAT RING
DISC HINGE/HINGE
PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
TYPE
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RENEWABLE
LIFT CHECK TYPE
BODY : 2975 PSIG
ASTM A 105
ASTM A 105
13% CR.STEEL FACING / 13% CR.STEEL
13%CR FACING/13%CR/13%CR+STEL
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS EN ISO 15761RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SCRF 3000 TO B-1.20.1
PIPING CLASS : J3A
Tag No: 53024
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 257 of 415
53321
53321
TAG NO. :
SHEET REV. NO.
DATE 14/12/2000 28/05/2001 30/06/2009
3 4 5
NOTES
4
5
6
TESTING SHALL BE AS PER BS EN 12266-1.
RADIOGRAPHY OF VALVE CASTINGS NOT REQUIRED.
VALVE TESTING AS PER BS 6755 (PART-I) IS ALSO ACCEPTABLE.
BODY
COVER
DISC
BODY SEAT RING
HINGE PIN
DISC HINGE
COVER STUD BOLT
COVER NUT
COVER GASKET
BY PASSES
TYPE
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RENEWABLE/NON
RENEWABLE
SWING CHECK TYPE
BODY : 450 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
FACED WITH 13% CR.STEEL/13% CR.STEEL
13% CR STEEL FACING/13% CR STEEL
13% CR STEEL(NO CASTING)
13% CR STEEL/A216 GR WCB/A515 GR 70
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER/CORRUGATED
SS316
13% CR STEEL(NO CASTING)/SS410/SS304
SEAT : 325 PSIG
Sheet No. 1 of 1
150 BS 1868RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS :A33A, A3A
Tag No: 53321
VALVE MATERIAL
SPECIFICATION
BPCL-KRClient :
CEMP PHASE - IIProject :
KOCHILocation :
16/43Dept./Sect. :
JOB SPECIFICATION NO.
6767-6-44-0006 Rev. 0
Copyright EIL-All rights reservedTemplate No. 5-0000-0001-T2 Rev. 1
Page 54 of 390
51413
51413
TAG NO. :
SHEET REV. NO.
DATE 19/02/2007
0
NOTES
4
5
TESTING SHALL BE AS PER API 598.
50% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RISING
SOLID/FLEXIBLE
RENEWABLE/NON
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
O.S & Y.
BODY : 1125 PSIG
80 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
SS 304 (NO CASTING)
SS 304
SS 304
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
CAUSTIC SERVICE(MAX.TEMP.110 DEG.C) &
AMINE;
SS 304
SEAT : 825 PSIG
Sheet No. 1 of 1
300 API-600RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS :B19A
Tag No: 51413
VALVE MATERIAL
SPECIFICATION
BPCL-KRClient :
CEMP PHASE - IIProject :
KOCHILocation :
16/43Dept./Sect. :
JOB SPECIFICATION NO.
6767-6-44-0006 Rev. 0
Copyright EIL-All rights reservedTemplate No. 5-0000-0001-T2 Rev. 1
Page 7 of 390
51013
51013
TAG NO. :
SHEET REV. NO.
DATE 19/02/2007
0
NOTES
4 TESTING SHALL BE AS PER API 598.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
SOLID
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
INTEGRAL
O.S & Y.
BODY : 2975 PSIG
80 PSIG
ASTM A 105
ASTM A 105
SS 304 (NO CASTING)
SS304+STELLITED
SS304+STELLITED
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316 - GRAFOIL FILLER
CAUSTIC(MAX.TEMP.110 DEG.C) AND AMINE
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 API-602RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS :A19A, B19A, D19A
Tag No: 51013
VALVE MATERIAL
SPECIFICATION
BPCL-KRClient :
CEMP PHASE - IIProject :
KOCHILocation :
16/43Dept./Sect. :
JOB SPECIFICATION NO.
6767-6-44-0006 Rev. 0
Copyright EIL-All rights reservedTemplate No. 5-0000-0001-T2 Rev. 1
Page 17 of 390
51066
51066
TAG NO. :
SHEET REV. NO.
DATE 19/02/2007
0
NOTES
4 TESTING SHALL BE AS PER API 598.
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RISING
SOLID
RENEWABLE
RENEWABLE WITH
VALVE OPEN ON
STREAM
NON RISING
INTEGRAL
O.S & Y.
BODY : 2400 PSIG
80 PSIG
ASTM A 182 GR.F316L
ASTM A 182 GR.F316L
SS 316L (NO CASTING)
STELLITED
STELLITED
CORROSION INHIBITED DIE FORMED FLEXIBLE
GRAPHITE WITH BRAIDED ANTI EXTRUSION
RINGS
MALLEABLE IRON/CAST ST/FAB.ST/DUCT. IRON
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316L-GRAFOIL FILLER
MAX TEMP 454 DEG.C.
SEAT : 1775 PSIG
Sheet No. 1 of 1
800 API-602RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SW 3000 TO B-16.11
PIPING CLASS :A1N, A1N1, A93N, B1N, B1N1
Tag No: 51066
VALVE MATERIAL
SPECIFICATION
BPCL-KRClient :
CEMP PHASE - IIProject :
KOCHILocation :
16/43Dept./Sect. :
JOB SPECIFICATION NO.
6767-6-44-0006 Rev. 0
Copyright EIL-All rights reservedTemplate No. 5-0000-0001-T2 Rev. 1
Page 21 of 390
51093
51093
TAG NO. :
SHEET REV. NO.
DATE
NOTES
BODY
BONNET
STEM
WEDGE DISC
BODY SEAT RING
STEM PACKING
HAND WHEEL
BONNET BOLTS
BONNET NUTS
BONNET GASKET
REQUIREMENT OF
GEAR OPERATOR
REQUIREMENT OF
GEAR
RADIOGRAPHY
SPECIAL SERVICE
CONDITIONS
BACK SEAT &
SHOULDER
OTHERS
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
Sheet No. 1 of 1
RATING :
SIZE RANGE : ENDS :
12
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
GATE VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
" TO " TO
PIPING CLASS :
Tag No: 51093
VALVE MATERIAL
SPECIFICATION
BPCL-KRClient :
CEMP PHASE - IIProject :
KOCHILocation :
16/43Dept./Sect. :
JOB SPECIFICATION NO.
6767-6-44-0006 Rev. 0
Copyright EIL-All rights reservedTemplate No. 5-0000-0001-T2 Rev. 1
Page 218 of 390
53024
53024
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995
2
NOTES
4
5
TESTING SHALL BE AS PER BS 6755 (PART-I).
VALVES SHALL BE OF STANDARD BORE DESIGN.
BODY
COVER
DISC/PISTON
BODY SEAT RING
DISC HINGE/HINGE
PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
TYPE
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
FORGED
BOLTED
RENEWABLE
LIFT CHECK TYPE
BODY : 2975 PSIG
ASTM A 105
ASTM A 105
13% CR.STEEL FACING / 13% CR.STEEL
13%CR FACING/13%CR/13%CR+STEL
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316- GRAFOIL FILLER
SEAT : 2175 PSIG
Sheet No. 1 of 1
800 BS-5352RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
0.5" TO 1.5" SCRF 3000 TO B-1.20.1
PIPING CLASS : J3A
Tag No: 53024
VALVE MATERIAL
SPECIFICATION
BPCL-KRClient :
CEMP PHASE - IIProject :
KOCHILocation :
16/43Dept./Sect. :
JOB SPECIFICATION NO.
6767-6-44-0006 Rev. 0
Copyright EIL-All rights reservedTemplate No. 5-0000-0001-T2 Rev. 1
Page 244 of 390
53313
53313
TAG NO. :
SHEET REV. NO.
DATE 19/02/2007
0
NOTES
4
5
TESTING SHALL BE AS BS 6755(PART-1)
50% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
BODY
COVER
DISC
BODY SEAT RING
DISC HINGE
HINGE PIN
COVER STUD BOLT
COVER NUT
COVER GASKET
BY PASSES
TYPE
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RENEWABLE/NON
RENEWABLE
SWING CHECK TYPE
BODY : 450 PSIG
ASTM A 216 GR.WCB
ASTM A 216 GR.WCB
SS 304
SS 304
SS 304/A216 GR WCB/A515 GR 70;
SS 304 (NO CASTING)
ASTM A193 GR B7
ASTM A194 GR 2H
SP WND SS316-GRAFOIL FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
CAUSTIC SERVICE(MAX.TEMP.110 DEG.C) &
AMINE
SEAT : 325 PSIG
Sheet No. 1 of 1
150 BS-1868RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS :A19A
Tag No: 53313
VALVE MATERIAL
SPECIFICATION
Engineers India Ltd.Client :
Std. SpecificationProject :
New DelhiLocation :
16/43Dept./Sect. :
STANDARD SPECIFICATION NO.
6-44-0006 Rev. 6
Format No. 8-00-0001-F1 Rev. 0 Copyright EIL-All rights reserved
Page 281 of 415
53430
53430
TAG NO. :
SHEET REV. NO.
DATE 02/01/1995 14/12/2000 28/05/2001 30/06/2009
2 3 4 5
NOTES
4
5
6
TESTING SHALL BE AS PER BS EN 12266-1.
10% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
VALVE TESTING AS PER BS 6755 (PART-I) IS ALSO ACCEPTABLE.
BODY
COVER
DISC
BODY SEAT RING
HINGE PIN
DISC HINGE
COVER STUD BOLT
COVER NUT
COVER GASKET
BY PASSES
TYPE
REQUIREMENT OF
RADIOGRAPHY
OTHERS
SPECIAL SERVICE
CONDITIONS
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE
WITH AIR
CAST
BOLTED
RENEWABLE/NON-
RENEWABLE
SWING CHECK TYPE
BODY : 1125 PSIG
ASTM A 217 GR.WC6 (NORM. & TEMP.)
ASTM A 217 GR.WC6 (NORM. & TEMP.)
STELLITED
STELLITED
13% CR STEEL(NO CASTING)
13% CR STEEL/A217 GR WC6(NORM & TEMP)
ASTM A193 GR B16
ASTM A194 GR 4/GR 7
SP WND SS316-GRAFOIL FILLER
REFER TECHNICAL NOTES FOR PURCHASE OF
VALVES.
MAX TEMP 538 DEG. C.
13% CR STEEL(NO CASTING)
SEAT : 825 PSIG
Sheet No. 1 of 1
300 BS-1868RATING :
SIZE RANGE : ENDS :
1
2
3
THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
BIDDER SHALL CLEARLY WRITE ALL/ ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH EIL'S SPEC BIDDER SHALL INDICATE "AGREED".
NO CUTTING/ OVERWRITING BY BIDDER ON EIL'S SPEC IS ALLOWED.
STANDARD:
MFGRS CAT/FIG:
RATING: ENDS:
SIGNATURE
&
SEAL
OF MANUFACTURER
CHECK VALVE SPECIFICATION MANUF'S OFFER
DESCRIPTION CONSTRUCTION CONSTRUCTION MATERIALMATERIAL
STANDARD :
2.0" TO 24.0" FLGD TO B-16.5 RF/125AARH
PIPING CLASS :B1D
Tag No: 53430
Annexure – 17
RATE CONTRACT FOR SUPPLY OF GATE, GLOBE AND CHECK VALVES FOR
BPCL-MUMBAI REFINERY, BPCL-KOCHI REFINERY AND NRL-NUMALIGARH
REFINERY
REF : CRFQ NO. 1000246245, E-tender no. 9009
PRICE BID.
Bidders are requested to fill PRICES in our
e-procurement portal.