Version 1.0 · 1|16
BARRIER EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
high quality collective side protection
ideal for escape routes
non roof-penetrating, fold away version
height- and inclination adjustable
less applied load due to the higher post distance of 2.2 m
universally extendable with door element, toe board or
corner tie (325° adjustable)
quick installation
pleasing, unobtrusively design
plastic coated deadweight with integrated carrying handles
to the latest state of the art certif ication:
EN 13374:2013
EN ISO 14122-3:2014
DIN 14094-2:2007
NF E 85-015:2008
The BARRIER fall protection system from INNOTECH® provides many varied application options in collective side protection, because it has been designed in such a way that it can be optimally adapted to individual construction conditions.The uncomplicated, quick installation and the option of mounting without roof penetration make the product into a flexible all-rounder, which fits in to the aesthetics of buildings in an extremely pleasing way.
The high quality railings are manufactured from weather-resistant aluminium and meet the most demanding architectural requirements due to an adjustable inclination.
BARRIERGuardrail systems E
N
Version 1.0 · 2|16
BARRIER EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
The VARIO self-supporting side protection system from INNOTECH®, held in place by deadweight loads, can be installed quickly, and is characterised in particular by a height adjustability of 125 mm. The system can be inclined up to 75°, whereby the system fits outstandingly into the constructional circumstances.
BARRIER-Z11RATING PLATE for BARRIER
(EN 13374 / EN ISO 14122-3 / DIN 14094-2 /
NF E 85-015)
BARRIER-F20TOE BOARD
Height x width x length: 170 x 20 x 3000 mm
Material: aluminium
suitable for BARRIER-S11/S12 post
and VARIO BARRIER-V12 foot unit
For use when no parapet higher than
150mm is available!
BARRIER-F22TOE BOARD BRACKET for fastening the toe board
to the vario BARRIER-V12 foot unit
Material: aluminium, stainless steel (AISI 304)
for fastening the BARRIER-F20 toe board
to the VARIO BARRIER-V12 foot unit
BARRIER-F23TOE BOARD CONNECTION SET
Material: aluminium, stainless steel (AISI 304)
for connecting two BARRIER-F20 toe boards
BARRIER-R21LINEAR TIE
Material: aluminium, stainless steel (AISI 304)
for connecting two rail pipes BARRIER-R11
BARRIER-R30CORNER TIE
Material: aluminium, plastic
for creating a corner of 2 rail pipes BARRIER-R11
Angle free adjustable!
BARRIER-R40WALL TIE
Mountable on: concrete or steel construction
Material: aluminium, plastic
Angle free adjustable!
BARRIER-R11ALUMINIUM PIPE, straight
Diameter x wall thickness x length: 36 x 2.5 x 3000 mm
Material: aluminium
BARRIER-VARIOSIDE PROTECTION SYSTEM – held by
deadweight loadMaterial: aluminium, stainless steel (AISI 304)Mountable on: flat roofs (max. 10° pitch)
System pitch (preassembled): 90°, 75°
Without roof perforation – parapet of at least 50 mm required!Preassembled bracket with post, plastic-encased concrete counterweight(c. 25 kg) with carrying handles!
SYSTEM-VARIO
SYSTEM VARIANTS
COMPONENTS
SYSTEM COMPONENTS
SYSTEM COMPONENTS
for a detailed view, see right
Version 1.0 · 3|16
BARRIER
1075
- 1
200
1050
- 1
170
54
1300
25
120
395
395
75° 10
75 -
120
0
1050
- 1
170
54
1300
25
120
395
395
75°
≤ 2200
≤ 400
≤ 40
0
≤ 400 ≤ 2200 ≤ 2200
≤ 18
00 800
≤≤
500
≤ 50
0
EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
BARRIER-R50END SEAL
Material: aluminium, plastic
end seal of two rail pipes BARRIER-R11
Projection of the rail pipe max. 500 mm!
BARRIER-R91END CAP for BARRIER-R11
Diameter x thickness: 36 x 2 mm
Packaging unit: 2 pieces
Material: plastic
end cap for rail pipe BARRIER-R11
Projection of the rail pipe max. 350 mm!
BARRIER-S11-1080POST, system VARIO, straight, fastened
Length: 1080 mm
Material: aluminium
BARRIER-S12-1150BOOM
Length: 1150 mm
Material: aluminium
standard length for VARIO system, escape route as per plans
BARRIER-T20DOOR SET
Material: aluminium
opening selectable up to 800 mm max.
For load-bearing implementation, 2 x BARRIER-V10
weights required for each door side!
BARRIER-V10VARIO-WEIGHT
Height x width x length: 122 x 395 x 395 mm
Weight: 25 kg
Material: plastic, concrete
plastic–coated concrete weight
for foot unit BARRIER-V12
BARRIER-V12VARIO-FOOT UNIT
Material: aluminium, stainless steel (AISI 304)
VARIO foot unit without boom/post, for creation
of a load-bearing collective side protection
BARRIER-V91VARIO-CORNER TIE
Material: stainless steel (AISI 304)
for rectangular connection
of two brackets of BARRIER-S12
DIMENSIONS
SYSTEM COMPONENTS SYSTEM COMPONENTS
for product description, see
Version 1.0 · 4|16
BARRIER EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
BARRIER-VARIOSIDE PROTECTION SYSTEM – held by
deadweight load
Mountable on: flat roofs (max. 10° pitch)
Material: aluminium, stainless steel (AISI 304)
System pitch (preassembled): 90°, 75°
SYSTEM VARIANTS
BARRIER-Z11RATING PLATE for BARRIER
(EN 13374 / EN ISO 14122-3 / DIN 14094-2 /
NF E 85-015)
COMPONENTS
SYSTEM COMPONENTS
BARRIER-R11ALUMINIUM PIPE, straight
Diameter x wall thickness x length: 36 x 2.5 x 3000 mm
Material: aluminium
BARRIER-R21LINEAR TIE
Material: aluminium, stainless steel (AISI 304)
for connecting two rail pipes BARRIER-R11
BARRIER-R30CORNER TIE
Material: aluminium, plastic
for creating a corner of 2 rail pipes BARRIER-R11
Angle free adjustable!
BARRIER-S11-1080POST, system VARIO, straight, fastened
Length: 1080 mm
Material: aluminium
The skylight guard from INNOTECH® is the ideal protection for skylights and complete strip lights. Installation takes place without roof penetration and provides optimum protection without any negative effect on the entry of sunlight.
SYSTEM-SKYLIGHT
for a detailed view, see right
Version 1.0 · 5|16
BARRIER
1980≤
1980
≤
2350
≤
2350≤
= =
= =
100
100
≤ 21
00
≤ 4450
400
400
2550
≤
250250
4900≤
= =
EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
SYSTEM COMPONENTS SYSTEM COMPONENTS
BARRIER-S12-1150BOOM
Length: 1150 mm
Material: aluminium
standard length for VARIO system, escape route as per plans
BARRIER-T23SIDE BAR
Length x width x height:565 x 45 x 25 mm
Material: aluminium
side bar for BARRIER-R11 pipe
Projection of pipe max. 500 mm!
BARRIER-V10VARIO-WEIGHT
Height x width x length: 122 x 395 x 395 mm
Weight: 25 kg
Material: plastic, concrete
plastic–coated concrete weight
for foot unit BARRIER-V12
BARRIER-V12VARIO-FOOT UNIT
Material: aluminium, stainless steel (AISI 304)
VARIO foot unit without boom/post, for creation
of a load-bearing collective side protection
BARRIER-V81VARIO-ADAPTER FOOT
Application: creation of a skylight fencing
of max. 2000 x 2000 mm
Material: aluminium, stainless steel (AISI 304)
for fastening the post BARRIER-S13
to a VARIO-weight BARRIER-V10
BARRIER-T20DOOR SET
Material: aluminium
opening selectable up to 800 mm max.
For load-bearing implementation, 2 x BARRIER-V10
weights required for each door side!
DIMENSIONS
for product description, see
Version 1.0 · 6|16
BARRIER EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
BARRIER-Z11RATING PLATE for BARRIER
(EN 13374 / EN ISO 14122-3 / DIN 14094-2 /
NF E 85-015)
COMPONENTS
SYSTEM COMPONENTS
SYSTEM COMPONENTS
BARRIER-F22TOE BOARD BRACKET for fastening the toe board
to the vario BARRIER-V12 foot unit
Material: aluminium, stainless steel (AISI 304)
for fastening the BARRIER-F20 toe board
to the VARIO BARRIER-V12 foot unit
BARRIER-F23TOE BOARD CONNECTION SET
Material: aluminium, stainless steel (AISI 304)
for connecting two BARRIER-F20 toe boards
BARRIER-R11ALUMINIUM PIPE, straight
Diameter x wall thickness x length: 36 x 2.5 x 3000 mm
Material: aluminium
BARRIER-R21LINEAR TIE
Material: aluminium, stainless steel (AISI 304)
for connecting two rail pipes BARRIER-R11
BARRIER-R30CORNER TIE
Material: aluminium, plastic
for creating a corner of 2 rail pipes BARRIER-R11
Angle free adjustable!
BARRIER-R40WALL TIE
Mountable on: concrete or steel construction
Material: aluminium, plastic
Angle free adjustable!
BARRIER-F20TOE BOARD
Height x width x length: 170 x 20 x 3000 mm
Material: aluminium
suitable for BARRIER-S11/S12 post
and VARIO BARRIER-V12 foot unit
For use when no parapet higher than
150mm is available!
The SYSTEM-VARIO escape route from INNOTECH® is installed without roof penetration, and can be held in place by deadweight load or by concrete slabs. The width of this flexible system can be variably adjusted – this makes it possible for people to move on the escape route completely freely and without any further protection. A larger distance between the posts fulfils the prerequisite for a much more economical use of material!
ESCAPE ROUTE SYSTEM-VARIO
for a detailed view, see right
Version 1.0 · 7|16
BARRIER
≤ 400 1800≤ 1800≤
≤ 18
00
≤ 400
≤ 40
0
B=
1800≤B=
1300
530 1380
EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
BARRIER-R91END CAP for BARRIER-R11
Diameter x thickness: 36 x 2 mm
Packaging unit: 2 pieces
Material: plastic
end cap for rail pipe BARRIER-R11
Projection of the rail pipe max. 350 mm!
SYSTEM COMPONENTS SYSTEM COMPONENTS
BARRIER-R50END SEAL
Material: aluminium, plastic
end seal of two rail pipes BARRIER-R11
Projection of the rail pipe max. 500 mm!
BARRIER-S12-1150BOOM
Length: 1150 mm
Material: aluminium
standard length for VARIO system,
escape route as per plans
BARRIER-S11-1080POST, System VARIO, straight, fastened
Length: 1080 mm
Material: aluminium
BARRIER-V10VARIO-WEIGHT
Height x width x length: 122 x 395 x 395 mm
Weight: 25 kg
Material: plastic, concrete
plastic–coated concrete weight
for foot unit BARRIER-V12
BARRIER-V12VARIO-FOOT UNIT
Material: aluminium, stainless steel (AISI 304)
VARIO foot unit without boom/post, for creation
of a load-bearing collective side protection
BARRIER-V91VARIO-CORNER TIE
Material: stainless steel (AISI 304)
for rectangular connection
of two brackets of BARRIER-S12
BARRIER-T20DOOR SET
Material: aluminium
opening selectable up to 800 mm max.
For load-bearing implementation, 2 x BARRIER-V10
weights required for each door side!
DIMENSIONS
for product description, see
Version 1.0 · 8|16
BARRIER EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
BARRIER-Z11RATING PLATE for BARRIER
(EN 13374 / EN ISO 14122-3 / DIN 14094-2 /
NF E 85-015)
COMPONENTS
SYSTEM COMPONENTS
SYSTEM COMPONENTS
BARRIER-F20TOE BOARD
Height x width x length: 170 x 20 x 3000 mm
Material: aluminium
suitable for BARRIER-S11/S12 post
and VARIO BARRIER-V12 foot unit
For use when no parapet higher than
150mm is available!
BARRIER-F22TOE BOARD BRACKET for fastening the toe board
to the vario BARRIER-V12 foot unit
Material: aluminium, stainless steel (AISI 304)
for fastening the BARRIER-F20 toe board
to the VARIO BARRIER-V12 foot unit
BARRIER-F23TOE BOARD CONNECTION SET
Material: aluminium, stainless steel (AISI 304)
for connecting two BARRIER-F20 toe boards
BARRIER-R11ALUMINIUM PIPE, straight
Diameter x wall thickness x length: 36 x 2.5 x 3000 mm
Material: aluminium
BARRIER-R21LINEAR TIE
Material: aluminium, stainless steel (AISI 304)
for connecting two rail pipes BARRIER-R11
BARRIER-R30CORNER TIE
Material: aluminium, plastic
for creating a corner of 2 rail pipes BARRIER-R11
Angle free adjustable!
BARRIER-R40WALL TIE
Mountable on: concrete or steel construction
Material: aluminium, plastic
Angle free adjustable!
The escape route system from INNOTECH®, using concrete slabs, is held in place by its own weight, and installed without roof penetration. The width of this flexible system can be variably adjusted – this makes it possible for people to move on the escape route completely freely and without any further protection. A larger distance between the posts fulfils the prerequisite for a much more economical use of material!
ESCAPE ROUTE SYSTEM USING CONCRETE SLABS
for a detailed view, see right
Version 1.0 · 9|16
BARRIER
1000
/ 1
200
/ 15
00
100
- 20
0
1018 ≤ 1800
100 - 200
≤ 18
00
≤ 1800
≤ 18
00
A - A
1100
≥
50
1450 / 1650 / 1950
A
A
100
~
1000
/ 1
200
/ 15
00
100
- 20
0
1018 ≤ 1800
100 - 200
≤ 18
00
≤ 1800
≤ 18
00
A - A
1100
≥
50
1450 / 1650 / 1950
A
A
100
~
EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
SYSTEM COMPONENTS SYSTEM COMPONENTS
BARRIER-R50END SEAL
Material: aluminium, plastic
end seal of two rail pipes BARRIER-R11
Projection of the rail pipe max. 500 mm!
BARRIER-R91END CAP for BARRIER-R11
Diameter x thickness: 36 x 2 mm
Packaging unit: 2 pieces
Material: plastic
end cap for rail pipe BARRIER-R11
Projection of the rail pipe max. 350 mm!
BARRIER-S12-1150BOOM
Length: 1150 mm
Material: aluminium
standard length for VARIO system,
escape route as per plans
BARRIER-S11-1080POST, System VARIO, straight, fastened
Length: 1080 mm
Material: aluminium
BARRIER-V12VARIO-FOOT UNIT
Material: aluminium, stainless steel (AISI 304)
VARIO foot unit without boom/post, for creation
of a load-bearing collective side protection
BARRIER-T20DOOR SET
Material: aluminium
opening selectable up to 800 mm max.
For load-bearing implementation, 2 x BARRIER-V10
weights required for each door side!
BARRIER-Z50-3000FOOTWAY RAIL for emergency escape routes
Height x width x length: 50 x 80 x 3000 mm
Application: emergency escape routes
Material: aluminium
for the creation of emergency escape routes
using concrete slabs
DIMENSIONS
for product description, see
Version 1.0 · 10|16
BARRIER EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
A further solution using the BARRIER side protection system from INNOTECH® consists of installation on the parapet. No weights are required for the implementation of this system. It allows people to move on the roof even better and more freely.
SYSTEM VARIANTS
BARRIER-ATTIKA-OBENSIDE PROTECTION SYSTEM – top of parapet
Mountable on: parapet (top)
Material: aluminium, stainless steel (AISI 304)
System pitch: 90°
BARRIER-Z11RATING PLATE for BARRIER
(EN 13374 / EN ISO 14122-3 / DIN 14094-2 /
NF E 85-015)
COMPONENTS
SYSTEM COMPONENTS
BARRIER-A21ADAPTER on the top of the parapet
Mountable on: concrete or steel construction
Effective height: 135 mm
Material: aluminium, stainless steel (AISI 304)
for fastening the post BARRIER-S13
to the top of the parapet
BARRIER-F20TOE BOARD
Height x width x length: 170 x 20 x 3000 mm
Material: aluminium
suitable for BARRIER-S11/S12 post
and VARIO BARRIER-V12 foot unit
For use when no parapet higher than
150mm is available!
BARRIER-F21TOE BOARD BRACKET for fastening the toe board
to the BARRIER-S13 post
Height x width: 25 x 48 mm
Packing unit: 2 items
Material: aluminium, stainless steel (AISI 304)
for attachment of the BARRIER-F20 toe board
to the BARRIER-S13 post
SYSTEM-TOP OF PARAPET
for a detailed view, see right
Version 1.0 · 11|16
BARRIER
80 150
135
- 16
525
120
15O
5
45O
4510
50
1185
- 1
215
≤ 47
0≥
150
≥ 15
0
10≤
400≤
≤ 90
0
400≤
≤ 2200
≤ 2200
≤ 18
00 800
≤
≤ 2200
≤ 90
0≤
500
≤ 50
0
EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
SYSTEM COMPONENTS SYSTEM COMPONENTS
BARRIER-F23TOE BOARD CONNECTION SET
Material: aluminium, stainless steel (AISI 304)
for connecting two BARRIER-F20 toe boards
BARRIER-R11ALUMINIUM PIPE, straight
Diameter x wall thickness x length: 36 x 2.5 x 3000 mm
Material: aluminium
BARRIER-R21LINEAR TIE
Material: aluminium, stainless steel (AISI 304)
for connecting two rail pipes BARRIER-R11
BARRIER-R30CORNER TIE
Material: aluminium, plastic
for creating a corner of 2 rail pipes BARRIER-R11
Angle free adjustable!
BARRIER-R40WALL TIE
Mountable on: concrete or steel construction
Material: aluminium, plastic
Angle free adjustable!
BARRIER-R50END SEAL
Material: aluminium, plastic
end seal of two rail pipes BARRIER-R11
Projection of the rail pipe max. 500 mm!
BARRIER-R91END CAP for BARRIER-R11
Diameter x thickness: 36 x 2 mm
Packaging unit: 2 pieces
Material: plastic
end cap for rail pipe BARRIER-R11
Projection of the rail pipe max. 350 mm!
BARRIER-S13-1050POST, straight, fastened
Length: 1050 mm
Material: aluminium
BARRIER-T20DOOR SET
Material: aluminium
opening selectable up to 800 mm max.
For load-bearing implementation, 2 x BARRIER-V10
weights required for each door side!
DIMENSIONS
for product description, see
Version 1.0 · 12|16
BARRIER EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
SYSTEM COMPONENTS
SYSTEM VARIANTS
BARRIER-ATTIKA-SEITLICHSIDE PROTECTION SYSTEM – inside or
outside of parapet
Material: aluminium, stainless steel (AISI 304)
Mountable on: parapet (inside or outside)
System pitch: 90°, 75°, 60°
BARRIER-Z11RATING PLATE for BARRIER
(EN 13374 / EN ISO 14122-3 / DIN 14094-2 /
NF E 85-015)
COMPONENTS
BARRIER-A10ADAPTER on the side of the parapet
Mountable on: concrete or steel construction
System pitch: 90°, 75°, 60°
Material: aluminium, stainless steel (AISI 304)
for fastening the post BARRIER-S13
to the inside of the parapet
BARRIER-A31SPACER BRACKET for parapet
Mountable on: concrete or steel construction
Material: aluminium, stainless steel (AISI 304)
2 dif ferent adjustment ranges
(65 mm – 105 mm or 100 mm – 145 mm)
for BARRIER-A10 and BARRIER-A11
BARRIER-R11ALUMINIUM PIPE, straight
Diameter x wall thickness x length: 36 x 2.5 x 3000 mm
Material: aluminium
The BARRIER side protection system from INNOTECH® can also be mounted on the outside of the parapet. The system can be conveniently adjusted in its inclination angle, allowing for exceptional adaptability to individual aesthetic demands of particular constructions. A variably adjustable spacing bracket [JC1] also enables completely correct installation of the side protection system, even in the presence of additional insulation.
SYSTEM-AT THE SIDE OF PARAPET
for a detailed view, see right
Version 1.0 · 13|16
BARRIER
80 5517
1064
1054
-
100
25
119,5
60°75°
90°
70
320
560
13
950
940
-
904
- 91
4
806
- 81
6
≤ 47
0
≥ 15
0
≥ 11
00
15°
30°
400≤
≤ 90
0
400≤
≤ 2200
≤ 2200
≤ 18
00
≤ 80
0
≤ 2200
≤ 90
0≤
500
≤ 50
0
EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
SYSTEM COMPONENTS SYSTEM COMPONENTS
BARRIER-R21LINEAR TIE
Material: aluminium, stainless steel (AISI 304)
for connecting two rail pipes BARRIER-R11
BARRIER-R30CORNER TIE
Material: aluminium, plastic
for creating a corner of 2 rail pipes BARRIER-R11
Angle free adjustable!
BARRIER-R50END SEAL
Material: aluminium, plastic
end seal of two rail pipes BARRIER-R11
Projection of the rail pipe max. 500 mm!
BARRIER-R91END CAP for BARRIER-R11
Diameter x thickness: 36 x 2 mm
Packaging unit: 2 pieces
Material: plastic
end cap for rail pipe BARRIER-R11
Projection of the rail pipe max. 350 mm!
BARRIER-S13-1050POST, straight, fastened
Length: 1050 mm
Material: aluminium
BARRIER-T20DOOR SET
Material: aluminium
opening selectable up to 800 mm max.
For load-bearing implementation, 2 x BARRIER-V10
weights required for each door side!
BARRIER-R40WALL TIE
Mountable on: concrete or steel construction
Material: aluminium, plastic
Angle free adjustable!
DIMENSIONS
for product description, see
Version 1.0 · 14|16
BARRIER EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
SYSTEM VARIANTS
BARRIER-ATTIKA-SEITLICH (KLAPPBAR)SIDE PROTECTION SYSTEM – inside of parapet
(fold-away)
Mountable on: parapet (inside)
Material: aluminium, stainless steel (AISI 304)
System pitch: 0°, 90°
SYSTEM COMPONENTS
BARRIER-Z11RATING PLATE for BARRIER
(EN 13374 / EN ISO 14122-3 / DIN 14094-2 /
NF E 85-015)
COMPONENTS
BARRIER-A11ADAPTER on the side of the parapet, foldable
Mountable on: concrete or steel construction
System pitch: 90°, foldable
Material: aluminium, stainless steel (AISI 304)
for fastening the post BARRIER-S13
to the inside of the parapet
BARRIER-A31SPACER BRACKET for parapet
Mountable on: concrete or steel construction
Material: aluminium, stainless steel (AISI 304)
2 dif ferent adjustment ranges
(65 mm – 105 mm or 100 mm – 145 mm)
for BARRIER-A10 and BARRIER-A11
BARRIER-F20TOE BOARD
Height x width x length: 170 x 20 x 3000 mm
Material: aluminium
suitable for BARRIER-S11/S12 post
and VARIO BARRIER-V12 foot unit
For use when no parapet higher than
150mm is available!
The BARRIER side protection system from INNOTECH® has a special characteristic: the system installed on the parapet is almost invisible, because it can be folded down. Therefore this system, which can be folded up, is perfectly suited to fit in with the building aesthetics.
SYSTEM-AT THE SIDE-FOLD AWAY OF PARAPET
for a detailed view, see right
Version 1.0 · 15|16
BARRIER
80 5517
1054
100
25
114
954
90°
70
13
940
≤ 500
≤ 50
0
≤ 20
00
≥ 75
≤ 120
≤ 50
0
≥ 75≤
120
10751120
≤ 2000 10751120
≤ 47
0
1140
≥ 11
00
≥ 15
0
EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
SYSTEM COMPONENTS SYSTEM COMPONENTS
BARRIER-R21LINEAR TIE
Material: aluminium, stainless steel (AISI 304)
for connecting two rail pipes BARRIER-R11
BARRIER-R50END SEAL
Material: aluminium, plastic
end seal of two rail pipes BARRIER-R11
Projection of the rail pipe max. 500 mm!
BARRIER-R91END CAP for BARRIER-R11
Diameter x thickness: 36 x 2 mm
Packaging unit: 2 pieces
Material: plastic
end cap for rail pipe BARRIER-R11
Projection of the rail pipe max. 350 mm!
BARRIER-S13-1050POST, straight, fastened
Length: 1050 mm
Material: aluminium
BARRIER-T20DOOR SET
Material: aluminium
opening selectable up to 800 mm max.
For load-bearing implementation, 2 x BARRIER-V10
weights required for each door side!
BARRIER-R11ALUMINIUM PIPE, straight
Diameter x wall thickness x length: 36 x 2.5 x 3000 mm
Material: aluminium
BARRIER-F21TOE BOARD BRACKET for fastening the toe board
to the BARRIER-S13 post
Height x width: 25 x 48 mm
Packing unit: 2 items
Material: aluminium, stainless steel (AISI 304)
for attachment of the BARRIER-F20 toe board
to the BARRIER-S13 post
DIMENSIONS
for product description, see
Version 1.0 · 16|16
BARRIER EXPERTS IN FALL PROTECTION
INNOTECH® Arbeitsschutz GmbH, Laizing 10, A-4656 KirchhamT: +43 7619 22122-0, F: -147, [email protected], www.innotech.at
SYSTEM VARIO
SYSTEM-TOP OF PARAPET
SYSTEM SKYLIGHT
SYSTEM-AT THE SIDE OF PARAPET
ESCAPE ROUTE SYSTEM-VARIO
SYSTEM-AT THE SIDE-FOLD AWAY OF PARAPET
ESCAPE ROUTE SYSTEM USING CONCRETE SLABS
page 2-3
page 10-11
Page 4-5
page 12-13
page 6-7
page 14-15
page 8-9