AUTOMATIC VOLTAGE REGULATOR
The input plug and output socket
are subject to change according
to different country and area.
IF THE INPUT VOLTAGE IS IN THE RANGE OF 190-250V, THE REGULATOR IS ABLE TO PROVIDE 100% LISTED MAXIMUM OUTPUT POWER.MAXIMUM OUTPUT POWER WILL CHANGE AS THE CURVE SHOWN BELOW.
1. Digital display meters are more accurate, stable and easy to read thevoltage status at a glance.
2. This unit comes with individual circuit breakers for both input and outputvoltage along with dual switches which ensures double protection.
3. This unit has a built-in new generation Japanese CPU, which ensuresconsistency and stability to the AVR unit.
Characteristic
PRECISION SELECTOR
The default position is 10%. When you press down the Precision Selector Button, the precision will be 8%.
When the regulator start up, the output meter will indicate the count-down delay time. The default delay time is 6sec. If you press down the Delay Selector Button, the delay time will be 120sec.After time-delaying, it will indicate the normal output voltage. Within the precision range it will display 220V, and when out of the precision range (for 8% precision: 204V~236V; for 10% precision:198V~242V), it will indicate the current output voltage.
When pressing the Delay Selector Button, it will display the current delay time(6sec or 120sec) for 3 seconds, then return to indicate the input voltage. When pressing the Precision Selector Button, it will display "PCL" when the current precision is 10%, and will display "PCH" when it's 8%.
If the output voltage is over 255V for 3 seconds, it will display a flashing "H", and if the output voltage is under 180V for 1 seconds, it will display a flashing "L".
s
This is the general power switch of the regulator.
POWER PROTECTED SWITCH
Shows the input voltage. If this regulator is used for refrigerant appliance, please select "DELAY", so as to minimize the opportunity of damage to the motor compressor. If not, please select "UNDELAY".
DELAY/UNDELAY SELECTOR
05
04
02
03
01
When the " WORKING " indicator is lit, the regulator is working.WORKING
When the "UNUSUAL" indicator is lit, the output voltage is over 255+/-5V, the protective circuit will start and the regulator will have no output, when the output voltage is under 245+/-5v, the regulator will automatically resume output.
UNUSUAL
"DELAYING LED" will keep flashing when delaying .When delaying is over, flash will stop and LED will light up.
DELAYING
220V+/-10%140V
to260V
50Hz 50Hz
1000VA
500VA
4.5A
2.3A
8A
3A
10A
12A
6.8A
9.1A
13.6A
22.7A
36.3A
45.5A
1500VA
2000VA
3000VA
5000VA
8000VA
10000VA
500VA
1000VA
1500VA
2000VA
3000VA
5000VA
8000VA
10000VA
OVERLOAD PROTECTION
25A
16A
32A
40A
INPUT : AC 140~260V
06 INDICATOR
Use the same current fuse for replacement
WORKING
DELAYING
UNUSUAL
DELAY
UNDELAY
8%
10%
888DIGITAL
TECH-SYSTEM
INPUT VOLTAGE
888220DIGITAL
TECH-SYSTEM
OUTPUT VOLTAGE
RE02-2000VAINPUT: 140-260VOUTPUT: 220V
WORKING
DELAYING
UNUSUAL
888DIGITAL
TECH-SYSTEM
INPUT VOLTAGE
888220DIGITAL
TECH-SYSTEM
OUTPUT VOLTAGE
DELAY
UNDELAYON
OFF
RE02-5000VAINPUT: 140-260VOUTPUT: 220V
8%
10%
01
02
INPUT METER
OUTPUT METER
03
INDICATOR
05
DELAY/UNDELAY SELECTOR
06
POWER SWITCH
04
PRECISION SELECTOR
WORKING
DELAYING
UNUSUAL
DELAY
UNDELAY
8%
10%
888DIGITAL
TECH-SYSTEM
INPUT VOLTAGE
888220DIGITAL
TECH-SYSTEM
OUTPUT VOLTAGE
RE02-2000VAINPUT: 140-260VOUTPUT: 220V
OUTPUT : AC 220V