INNOLUX
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
InnoLux copyright 2004 All rights reserved, Copying forbidden.
Record of Revision
Version Revise Date Page Content
Pre-spec.01 2007/06/05 Initial Release
INNOLUX
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Contents:
1.General Specifications ..............................................................................................................1
2.Pin Assignment .........................................................................................................................2
3.Operation Specifications ...........................................................................................................5
3.1. Absolute Maximum Ratings .............................................................................................5
3.2.Typical Operation Conditions............................................................................................6
3.3.Power Sequence ..............................................................................................................7
3.4.Timing Characteristics ......................................................................................................8
3.4.1.Timing Conditions.......................................................................................................8
3.4.2.Timing Diagram........................................................................................................10
4. Optical Specifications.............................................................................................................13
5.Reliability Test .........................................................................................................................17
6.General Precautions ...............................................................................................................18
6.1.Safety .............................................................................................................................18
6.2.Handling .........................................................................................................................18
6.3.Static Electricity...............................................................................................................18
6.4.Storage ...........................................................................................................................18
6.5.Cleaning .........................................................................................................................18
7.Mechanical Drawing................................................................................................................19
8.Package Drawing....................................................................................................................20
.8.1.Packaging Material Table...............................................................................................20
.8.2.Packaging Quantity........................................................................................................20
8.3.Packaging Quantity.........................................................................................................21
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 1/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
1.General Specifications
No. Item Specification Remark
1 LCD size 5.6 inch(Diagonal)
2 Driver element a-Si TFT active matrix
3 Resolution 640X(RGB)X480
4 Display mode Normally White, Transmissive
5 Dot pitch 0.0588(W)X0.1764(H) mm
6 Active area 112.896 (W)X84.672(H) mm
7 Module size 126.5(W)X100(H)X5.7(D) mm Note 1
8 Surface treatment Anti-Glare
9 Color arrangement RGB-stripe
10 Interface Digital
11 Backlight Power consumption TBD Note 2
12 Panel Power consumption TBD Note 3
13 Weight TBD
Note 1: Refer to Mechanical Drawing.
Note 2: Including LED Driver power consumption. Note 3: Including T-con Board power consumption.
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 2/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
2.Pin Assignment
TFT LCD Panel Driving Section FPC connector is used for the module electronics interface. The recommended model is FH19-40S -0.5SH manufactured by HiRose.
Pin No. Symbol I/O Function Remark
1 VLED P Power Voltage for LED circuit
2 VLED P Power Voltage for LED circuit
3 ADJ I Adjust the LED brightness with PWM Pulse
Note1,2
4 GLED P Ground for LED circuit
5 GLED P Ground for LED circuit
6 VCC P Power Voltage for digital circuit
7 VCC P Power Voltage for digital circuit
8 MODE I DE or HV mode control Note 3
9 DE I Data enable
10 VS I Vsync signal input
11 HS I Hsync signal input
12 GND P Power ground
13 B5 I Blue data input (MSB)
14 B4 I Blue data input
15 B3 I Blue data input
16 GND P Power ground
17 B2 I Blue data input
18 B1 I Blue data input
19 B0 I Blue data input(LSB)
20 GND P Power ground
21 G5 I Green data input(MSB)
22 G4 I Green data input
23 G3 I Green data input
24 GND P Power ground
25 G2 I Green data input
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 3/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
26 G1 I Green data input
27 G0 I Green data input(LSB)
28 GND P Power ground
29 R5 I Red data input(MSB)
30 R4 I Red data input
31 R3 I Red data input
32 GND P Power ground
33 R2 I Red data input
34 R1 I Red data input
35 R0 I Red data input(LSB)
36 GND P Power ground
37 DCLK I Sample clock
38 GND P Power ground
39 L/R I Select left to right scanning direction Note4,5
40 U/D I Select up or down scanning direction Note4,5
Note: I: input, O: output t, P: Power Note1:ADJ adjust brightness to control Pin,Pulse duty the bigger brighter.
Note 2:ADJ signal=0~3.3V,operation frequency:100~300Hz
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 4/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Note 3: DE Mode, Mode=”H”,HS floating and VS floating HV Mode, Mode=”L” and DE floating
Note 4: Selection of scanning mode
Setting of scan control input
U/D L/R
Scanning direction
GND VCC Up to down, left to right
VCC GND Down to up, right to left
GND GND Up to down, right to left
VCC VCC Down to up, left to right
Note 5: Definition of scanning direction.
Refer to the figure as below:
Left Right
Up
Down
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 5/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
3.Operation Specifications
3.1. Absolute Maximum Ratings
(Note 1)
Values Item Symbol
Min. Max.
Unit Remark
VCC -0.3 6.5 V Power voltage
VLED -0.3 6.5 V
Operation temperature TOP -20 70
Storage temperature TST -30 80
Note 1: The absolute maximum rating values of the module should not be exceeded.
Once exceeded absolute maximum rating values, the characteristics of the module may not be recovered. Even in an extreme condition, may result in module permanently destroyed.
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 6/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
3.2. Typical Operation Conditions
Values Item Symbol
Min. Typ. Max.
Unit Remark
VCC 3.1 3.3 3.5 V Note 1 Power voltage
VLED 4.8 5.0 5.2 V Note 2
ICC - (200) - mA Current Consumption
ILED - (380) - mA Note 3
Input logic high voltage VIH 0.7VCC - 1VCC V
Input logic low voltage VIL 0 - 0.3VCC V
Note 4
LED life time - 20,000 - - Hr Note 5
Note 1: VCC setting should match the signals output voltage (refer to Note 4) of customer’s
system board. Note 2: LED driving voltage. Note 3: LED driving current. Note 4: DCLK,DE, HS, VS, R0~ R5,,G0~ G5,B0~ B5. Note 5: The “LED life time” is defined as the module brightness decrease to 50% original
brightness at Ta=25 and VLED=5.0V. The LED lifetime could be decreased if operating VLED is larger than 5.0V.
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 7/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
3.3.Power Sequence
Power Supply Vcc
Data Signal
t1
t1
B/L
t2
t3
Note:Data includes DE, VS ,HS,B0~B5,G0~G5,R0~R5,DCLK.
t1 > 1 mSec
t2 > 1 mSec
t3 > 1 mSec
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 8/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
3.4.Timing Characteristics
3.4.1.Timing Conditions
Input/Output Timing
Values Item Symbol
Min. Typ. Max. Unit. Remark
PXLCLK clock time Tclk - 37 ns
PXLCLK pulse duty Tcwh 40 50 60 % Tclk
DATA set-up time Tdsu 12 - - ns DATA to PXLCLK
DATA hold time Tdhd 12 - - ns DATA to PXLCLK
DE setup time Tesu 12 - - ns DE to PXLCLK
VSYNC setup time Tvst 12 - - ns
VSYNC hold time Tvhd 12 - - ns
HSYNC setup time Thst 12 - - ns
HSYNC hold time Thhd 12 - - ns
HSYNC period time Th 60 63.56 67 us
HSYNC width Thwh 1 - - Tclk
VSYNC width Tvwh 1 - - Th
HSYNC to CLKIN Thc - - 1 Tclk
DE Mode input Timing Limitation
Values DE Mode
Min. Typ. Max. Unit Remark
TCLK 33.3 39.7 -- ns 1tclk
THC 48 160 765 tclk
THD 640 640 640 tclk
TH 688 800 1405 tclk 1TH=1line
TVC 6 45 255 line
TVD 480 480 480 line
TV 486 525 735 line 1TV=1field
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 9/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
HV Mode input Timing Limitation
Values HV Mode
Min. Typ. Max.
Unit Remark
Tclk 33.3 39.7 - ns 1tclk
Thwh - 10 - tclk
Thbp - 134 - tclk
Thfp - 16 - tclk
THD - 640 - tclk
TH - 800 - tclk 1TH=1 line
Tvwh - 2 - line
Tvbp - 11 - line
Tvfp - 32 - line
TVD - 480 - line
TV - 525 - line 1TV=1 field
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 10/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
3.4.2.Timing Diagram
Fig.3-1 Clock and Data Input Timing Diagram
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 11/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Fig.3-2 DE Mode Input Timing
Fig.3-3 HV Mode Input Timing
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 12/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Fig. 3-4 18 bit RGB mode for 640 x(RGB)x 480
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 13/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
4. Optical Specifications
Values Item Symbol Condition
Min. Typ. Max.
Unit Remark
θL Φ=180°(9 o’clock) 60 70 -
θR Φ=0°(3 o’clock) 60 70 -
θT Φ=90°(12 o’clock) 40 50 -
Viewing angle (CR≥10)
θB Φ=270°(6 o’clock) 60 70 -
degree Note 1
TON - 10 20 msec Note 3 Response time
TOFF - 15 30 msec Note 3
Contrast ratio CR 400 500 - - Note 4
WX 0.26 0.31 0.36 -
Color chromaticity
WY 0.28 0.33 0.38 -
Note 2 Note 5 Note 6
Luminance L1 300 350 - cd/m² Note 6
Luminance uniformity YU
Normal θ=Φ=0°
70 75 - % Note 6,7
Test Conditions:
1. VCC=3.3V, VLED=5.0V , the ambient temperature is 25 . 2. The test systems refer to Note 2.
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 14/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Note 1: Definition of viewing angle range
Fig. 4-1 Definition of viewing angle
Note 2: Definition of optical measurement system. The optical characteristics should be measured in dark room. After 30 minutes
operation, the optical properties are measured at the center point of the LCD screen. (Response time is measured by Photo detector TOPCON BM-7, other items are measured by BM-5A/Field of view: 1° /Height: 500mm.)
Fig. 4-2 Optical measurement system setup
Normal line θ=Φ=0°
Normal line θ=Φ=0°
Photo detector
Φ=90° 12 o’clock direction
Φ=270° 6 o’clock direction
Φ=0° Φ=180°
Active Area
500mm
LCD Panel
Φ=90° 12 o’clock direction
Φ=270° 6 o’clock direction
Φ=0° Φ=180°
Active Area
θL
θT θB
θR
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 15/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Note 3: Definition of Response time The response time is defined as the LCD optical switching time interval between
“White” state and “Black” state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%.
Fig. 4-3 Definition of response time
Note 4: Definition of contrast ratio
state Black"" the on is LCD whenmeasured Luminance
state White"" the on is LCD whenmeasured Luminance=(CR) ratio Contrast
Note 5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD.
Note 6: All input terminals LCD panel must be ground while measuring the center area of the panel. The LED driving condition is VLED=5.0V
100%
90%
10% 0%
Ph
oto
de
tecto
r o
utp
ut
(Re
lative
va
lue
)
TON TOFF
White (TFT OFF) Black (TFT ON) White (TFT OFF)
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 16/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Note 7: Definition of Luminance Uniformity
Active area is divided into 9 measuring areas (Refer to Fig. 4-4 ).Every measuring point is placed at the center of each measuring area.
max
min
B
B(Yu)Uniformity Luminance =
L-------Active area length W----- Active area width
W
W/3
W/3
W/6 L/3L/3L/6
L
Fig. 4-4 Definition of measuring points
Bmax: The measured maximum luminance of all measurement position. Bmin: The measured minimum luminance of all measurement position.
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 17/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
5.Reliability Test
(Note3)
Item Test Conditions Remark
High Temperature Storage Ta = 80 240 hrs Note 1, 4
Low Temperature Storage Ta = -30 240hrs Note 1,4
High Temperature Operation
Ts = 70 240hrs Note 2,4
Low Temperature Operation
Ta = -20 240hrs Note 1,4
Operate at High Temperature and Humidity
+40 , 90%RH 240 hrs Note 4
Thermal Shock -30 /30 min ~ + 80 /30 min for a total 100
cycles, Start with cold temperature and end with high temperature
Note 4
Vibration Test
Frequency range:10~55Hz Stroke:1.5mm Sweep:10Hz~55Hz~10Hz 2 hours for each direction of X. Y. Z. (6 hours for total)
Mechanical Shock 100G 6ms,±X, ±Y, ±Z 3 times for each direction
Package Vibration Test
Random Vibration : 0.015G*G/Hz from 5-200HZ, -6dB/Octave from 200-500HZ 2 hours for each direction of X. Y. Z. (6 hours for total)
Package Drop Test Height:60 cm 1 corner, 3 edges, 6 surfaces
Electro Static Discharge ± 2KV, Human Body Mode, 100pF/1500Ω
Note 1: Ta is the ambient temperature of samples.
Note 2: Ts is the temperature of panel’s surface.
Note 3: In the standard condition, there shall be no practical problem that may
affect the display function. After the reliability test, the product only guarantees
operation, but doesn't guarantee all the cosmetic specification.
Note 4: Before cosmetic and function tests , the product must have enough recovery time,
at least 2 hours at room temperature.
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 18/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
6.General Precautions
6.1.Safety
Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches your skin or clothes, wash it off immediately by using soap and water.
6.2.Handling
1. The LCD panel is plate glass. Do not subject the panel to mechanical shock or to excessive force on its surface.
2. The polarizer attached to the display is easily damaged. Please handle it carefully to avoid scratch or other damages.
3. To avoid contamination on the display surface, do not touch the module surface with bare hands.
4. Keep a space so that the LCD panels do not touch other components. 5. Put cover board such as acrylic board on the surface of LCD panel to protect panel
from damages. 6. Transparent electrodes may be disconnected if you use the LCD panel under
environmental conditions where the condensation of dew occurs. 7. Do not leave module in direct sunlight to avoid malfunction of the ICs.
6.3.Static Electricity
1. Be sure to ground module before turning on power or operating module. 2. Do not apply voltage which exceeds the absolute maximum rating value.
6.4.Storage
1. Store the module in a dark room where must keep at +25±10 and 65%RH or
less. 2. Do not store the module in surroundings containing organic solvent or corrosive
gas. 3. Store the module in an anti-electrostatic container or bag.
6.5.Cleaning
1. Do not wipe the polarizer with dry cloth. It might cause scratch. 2. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might
permanent damage to the polarizer.
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 19/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
7.Mechanical Drawing
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 20/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
8.Package Drawing
.8.1.Packaging Material Table
No. Item Model
(Material) Dimensions(mm)
Unit Weight (kg)
Quantity Remark
1 LCM Module
AT056TN53 V.1 126.5×100×5.7 TBD 68pcs
2 Partition B Corrugated paper
105×349 0.020 2pcs
3 Corrugated Board
B Corrugated paper
510×350 0.144 2pcs
4 Partition Paper
BC Corrugated paper
512×226×349 1.170 1set
5 Dust-Proof Bag
PE 700×530 0.060 1pcs
6 A/S Bag PE 170×110×0.2 0.002 68pcs
7 Carton Corrugated paper 530×355×255 1.100 1 pcs
8 Total Weight TBD
.8.2.Packaging Quantity
Total LCM quantity in Carton: no. of Partition 4 Rows x quantity per Row 17= 68
INNOLUX SPEC NO.: A056-53-TT-11
PAGE: 21/21
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
8.3.Packaging Quantity