SS14-0724
DREW MARINE
Ground Clamp Ground Clamp Whip
Electrode Whip (Stinger)Safety Electrode Holder
AccessoriesFor personal safety during welding or when handling hot metal, AMERARC welding gloves and aprons offer maximum protection. Gloves should be replaced if they show signs of cracking or embrittlement. For safety, protection and convenience, AMERARC Arc Welding accessories are recommended for the personal use of all welders.
A full range of auxiliary equipment is offered to complement and match AMERARC Arc Welding Machines and AMERARC consumables.
ARC WELDING EQUIPMENT & ACCESSORIES
Cable Connector, Pair(accommodates each size cable)
Cable Drum with Crank. Ground Clamp, Safety Electrode Holder and Cable Are Available Separately.
Description PCNWelding Cable 35 mm2 0602012Welding Cable 50 mm2 0603010Welding Cable 70 mm2 0604018Cable Drum with Crank 0605016Electrode Whip (Stinger) 0614025Cable Connector, Pair 0692054Ground Clamp 600 AMP 0613019Safety Electrode Holder 400 AMP 0614017Ground Clamp Whip 0613027
The following chart compares Drew Marine cable sizing (mm2 of conductor area) to other cable standards.
Welding Cable Comparison Chartmm2 CIRCULAR MILS AWG SIZE 26.7 52,620 #3 33.6 66,360 #2 35.0* 69,072 – 42.4 83,690 #1 50.0* 98,675 – 53.5 105,600 1/0 67.4 133,100 2/0 70.0* 138,145 – 85.0 167,800 3/0 95.0 187,483 107.2 211,600 4/0 *Drew standard sizes 35, 50 and 70 mm2
Apron
Gloves
Chipping Hammer
Brush
WELDING CABLE SELECTION CHARTMaximum Location Distance from Welding Power Source to Welding Amperage 1Ft = .3048 M Ft 49 99 132 165 197 247 296 329 M 15 30 40 50 60 75 90 100 100 35* 35 35 50 50 70 ** 150 35 50 50 70 200 35 50 70 250 50 70 300 50 350 50 400 70
* Cable cross-sectional area in Square mm.** Consult your Drew representative for unlisted cable ratings.
