![Page 1: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/1.jpg)
Analysis of Rocket Propulsion
P M V Subbarao
Professor
Mechanical Engineering Department
Continuously accelerating Control Volume….
![Page 2: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/2.jpg)
THE TSIOLKOVSKY ROCKET EQUATION
![Page 3: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/3.jpg)
Force Balance on A Rocket
DgMTdt
dVM r
rr sin
DgMdt
dMC
dt
dVM r
rrr sin
![Page 4: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/4.jpg)
r
r
r
r
M
Dg
dt
dM
M
C
dt
dV sin
Let
dragrnalgravitatiorspacerr VVVV
![Page 5: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/5.jpg)
bt
nalgravitatior dtgV0
sin bt
rdragr dt
M
DV
0
bt
e
rir
rspacer Mr
MCdt
dt
dM
M
CV
0
ln
For a typical launch vehicle headed to an orbit, aerodynamic drag losses are typically quite small, on the order of 100 to 500 m/sec. Gravitational losses are larger, generally ranging from 700 to 1200 m/sec depending on the shape of the trajectory to orbit. By far the largest term is the equation for the space velocity increment.
![Page 6: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/6.jpg)
REACHING ORBIT
• The lowest altitude where a stable orbit can be maintained, is at an altitude of 185 km.
• This requires an Orbital velocity approximately 7777 m/sec.
• To reach this velocity from a Space Center, a rocket requires an ideal velocity increment of 9050 m/sec.
• The velocity due to the rotation of the Earth is approximately 427 m/sec, assuming gravitational plus drag losses of 1700 m/sec.
• A Hydrogen-Oxygen system with an effective average exhaust velocity (from sealevel to vacuum) of 4000 m/sec would require Mi/ Mf = 9.7.
![Page 7: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/7.jpg)
Geostationary orbit
• A circular geosynchronous orbit in the plane of the Earth's equator has a radius of approximately 42,164 km (26,199 mi) from the center of the Earth.
• A satellite in such an orbit is at an altitude of approximately 35,786 km (22,236 mi) above mean sea level.
• It maintains the same position relative to the Earth's surface.
• If one could see a satellite in geostationary orbit, it would appear to hover at the same point in the sky.
• Orbital velocity is 11,066 km/hr= 3.07 km/sec (6,876 miles/hr).
![Page 8: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/8.jpg)
Travel Cycle of Modern Spacecrafts
![Page 9: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/9.jpg)
MULTISTAGE ROCKETS
• With current technology and fuels, a single stage rocket to orbit is still not possible.
• It is necessary to reach orbit using a multistage system where a certain fraction of the vehicle mass is dropped off after use thus allowing the non-payload mass carried to orbit to be as small as possible.
• The final velocity of an n stage launch system is the sum of the velocity gains from each stage.
nn VVVVV ...........321
![Page 10: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/10.jpg)
ANALYSIS OF MULTISTAGE ROCKETS
M0i : The total initial mass of the ith stage prior to firing including the payload mass,ie, the mass of i, i+1, i+2, i+3,...., n stages.
Mpi : The mass of propellant in the ith stage.
![Page 11: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/11.jpg)
Msi : Structural mass of the ith stage alone including the mass of its engine, controllers and instrumentation as well as any residual propellant which is not expended by the end of the burn.
ML : The payload mass
Mass ratio
pii
i
i
ii MM
M
M
MR
0
0
10
0
sii
sipiii MM
MMMR
10
10
1,
lni
riispacer Mr
MCV
![Page 12: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/12.jpg)
100
10
100
10
ii
sii
ii
sipii
i
MMMM
MMMMM
R
100100
10
100
101
ii
si
ii
i
ii
i
i
MMM
MMM
MMM
R
![Page 13: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/13.jpg)
Structural coefficient
pisi
si
ii
sii MM
M
MM
M
100
Payload ratio
100
10
ii
ii MM
M
Ln
L
nn
nn MM
M
MM
M
0100
10
![Page 14: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/14.jpg)
ii
iiR
1
Space (Ideal) velocity increment
n
iin RCV1
ln
Payload fraction
n
LL
M
M
M
M
M
M
M
M
M
M
003
04
02
03
01
02
01
....
![Page 15: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/15.jpg)
n
nL
M
M
1....
111 3
3
2
2
1
1
01
![Page 16: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/16.jpg)
MOMENTUM BALANCE FOR A ROCKET
Rocket mass X Acceleration = Thrust – Drag -gravity effect
dragTr
r FgFdt
dVM sin
![Page 17: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/17.jpg)
EFFECTIVE EXHAUST VELOCITY
The total mechanical impulse (total change of omentum) generated by an applied force, FT, is:
riV
idrag
rr
ti
Tii dtFgdt
dVMFI
00
sin
The total propellant mass expended is
ti
ipi dtmM0
![Page 18: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/18.jpg)
The instantaneous change of momentum per unit expenditure of propellant mass defines the effective exhaust velocity.
ii
Ti
pi
ii S
m
F
dM
dIC
![Page 19: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/19.jpg)
Rocket Principles
• High pressure/temperature/velocity exhaust gases provided through combustion and expansion through nozzle of suitable fuel and oxidiser mixture.
• A rocket carries both the fuel and oxidiser onboard the vehicle whereas an air-breather engine takes in its oxygen supply from the atmosphere.
![Page 20: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/20.jpg)
Criteria of Performance
• Specific to rockets only.– thrust– specific impulse– total impulse– effective exhaust velocity– thrust coefficient– characteristic velocity
![Page 21: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/21.jpg)
Thrust (F)
For a rocket engine:
m
ambeeejectsejectsT ppAUmF
Where:
= propellant mass flow rate
pe = exit pressure, paamb = ambient pressure
Uejects = exit plane velocity, Ae = exit area
![Page 22: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/22.jpg)
Specific Impulse (I or Isp)
• The ratio of thrust / ejects mass flow rate is used to define a rocket’s specific impulse-best measure of overall performance of rocket motor.
• In SI terms, the units of I are m/s or Ns/kg.
• In the US:
• with units of seconds - multiply by g (i.e. 9.80665 m/s2) in order to obtain SI units of m/s or Ns/kg.
• Losses mean typical values are 92% to 98% of ideal values.
ejects
T
m
F
spI
![Page 23: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/23.jpg)
Total Impulse (Itot)
• Defined as:
where tb = time of burning
• If FT is constant during burn:
bt
T dtF0
totalI
bT tF totalI
![Page 24: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/24.jpg)
• Thus the same total impulse may be obtained by either :
• high FT, short tb (usually preferable), or
• low FT, long tb
• Also, for constant propellant consumption (ejects) rate:
bejectsejects
T tmm
F
totalI
![Page 25: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/25.jpg)
Effective Exhaust Velocity (c)
• Convenient to define an effective exhaust velocity (c), where:
cmF ejectsT I
ejects
T
m
Fc
ejects
e
m
pc
eamb
e
ApU
![Page 26: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/26.jpg)
Thrust Coefficient (CF)
• Defined as:
t
TF A
FC
cP
where pc = combustion chamber pressure,
At = nozzle throat area
• Depends primarily on (pc/pa) so a good indicator of nozzle performance – dominated by pressure ratio.
![Page 27: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/27.jpg)
Characteristic Velocity (c*)
• Defined as:
(6)ejects
t*
m
AC
cP
•Calculated from standard test data.
• It is independent of nozzle performance and is therefore used as a measure of combustion efficiency – dominated by Tc (combustion chamber temperature).
![Page 28: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/28.jpg)
Thermodynamic Performance - Thrust
• Parameters affecting thrust are primarily:– mass flow rate– exhaust velocity– exhaust pressure– nozzle exit area
![Page 29: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/29.jpg)
Thermodynamic Performance - Specific Impulse
![Page 30: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/30.jpg)
Thermodynamic Performance - Specific Impulse
Variable Parameters - Observations• Strong pressure ratio effect - but rapidly diminishing returns
after about 30:1.
• High Tc value desirable for high I - but gives problems with heat transfer into case walls and dissociation of combustion products – practical limit between about 2750 and 3500 K, depending on propellant.
• Low value of molecular weight desirable – favouring use of hydrogen-based fuels.
• Low values of desirable.
![Page 31: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/31.jpg)
31
Thrust Coefficient (CF)
• Maximum thrust when exhausting into a vacuum (e.g. in space), when:
(11a)
![Page 32: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/32.jpg)
Thrust Coefficient (CF) - Observations
• More desirable to run a rocket under-expanded (to left of optimum line) rather than over-expanded.
• Uses shorter nozzle with reduced weight and size.
• Increasing pressure ratio improves performance but improvements diminish above about 30/1.
• Large nozzle exit area required at high pressure ratios – implications for space applications.
![Page 33: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/33.jpg)
Actual Rocket Performance
• Performance may be affected by any of the following deviations to simplifying assumptions: – Properties of products of combustion vary with static
temperature and thus position in nozzle.– Specific heats of combustion products vary with temperature.– Non-isentropic flow in nozzle.– Heat loss to case and nozzle walls.– Pressure drop in combustion chamber due to heat release.– Power required for pumping liquid propellants.– Suspended particles present in exhaust gas.
![Page 34: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/34.jpg)
Internal Ballistics• Liquid propellant engines store fuel and oxidiser
separately - then introduced into combustion chamber.
• Solid propellant motors use propellant mixture containing all material required for combustion.
• Majority of modern GW use solid propellant rocket motors, mainly due to simplicity and storage advantages.
• Internal ballistics is study of combustion process of solid propellant.
![Page 35: Analysis of Rocket Propulsion P M V Subbarao Professor Mechanical Engineering Department Continuously accelerating Control Volume…](https://reader036.vdocuments.us/reader036/viewer/2022062320/56649c855503460f9493b92c/html5/thumbnails/35.jpg)
Solid Propellant Combustion
• Combustion chamber is high pressure tank containing propellant charge at whose surface burning occurs.
• No arrangement made for its control – charge ignited and left to itself so must self-regulate to avoid explosion.
• Certain measure of control provided by charge and combustion chamber design and with inhibitor coatings.