26
1 INNOVATION DRIVE, DES PLAINES, IL 60016 WWW.AMCOENCLOSURES.COM FAX: 847-391-8354 PHONE: 847-391-8100 1 INNOVATION DRIVE, DES PLAINES, IL 60016
an IMS Engineered Products Brand
Aluminum
Aluminum SFS
Our heavy duty aluminum Structural Framing System (SFS) is a simple method of designing and building frames and enclosures to special size and strength requirements. This unique AMCO Enclosures system provides a selection of 14 aluminum extrusions (1.50” OD) and 8 types of corner castings (0.125” wall thickness). The �anges in the extrusions accommodate .625” formed panels and .125” �at panels (made upon request). The system accepts locking clips (provided standard) for permanent designs or non-locking clips (optional) for prototypes or planned disassembly. When reinforced with bolt-on gussets, SFS assemblies can meet MIL-STD-167-1 shock and vibration requirements.
Ordering Information:The SFS can be ordered in the following ways to meet your current and future requirements:
• Completely assembled and shipped ready-to-load
required• As bulk material; castings and extrusions you can
stock, cut and modify yourself based on per project requirements
Aluminum Castings
ALC-1Three corner casting
ALC-2Four ear corner, joining or foot casting
ALC-30° to 120° hinged casting
ALC-4Three ear corner casting
ALC-5Two ear corner casting
ALC-6Five ear corner casting
ALC-7Four ear (cross) joining casting “X”
ALC-8Six ear joining casting
Castings are furnished with locking clips for assembly to extrusions. Special services available include: machining, hardware installation, marking and packaging.
Aluminum Gussett with HardwareALG
Non-Locking ClipsALC-SN
Locking ClipsALC-S
PinsH264
(Material: 356-T6 aluminum per ASTM B108)
27
1 INNOVATION DRIVE, DES PLAINES, IL 60016 WWW.AMCOENCLOSURES.COM FAX: 847-391-8354 PHONE: 847-391-8100 1 INNOVATION DRIVE, DES PLAINES
Maximum extrusion length is 20’. Extrusions are supplied without mounting holes. Extrusions will be pre-cut to length and mitered to 90° angles at no additional cost.
For Flush Mounting 1/8”(3.18mm) Flat Panels
ALE-1A
ALE-2A
ALE-2B
and recessed.ALE-2Dmember for a series of panels.ALE-3Amember for a series of panels.ALE
For Flush Mounting 5/8”(15.88mm) Formed Panels orRecessing 1/8” (3.18mm) Flat Panels
ALE-1
(3.18mm) panels.ALE-2
1/8” (3.18mm) panels.ALE-2C
(15.88mm).ALE-3
recessed 1/8” (3.18mm) panels.ALE-4joining member for internal series mounting
(3.18mm) panels.
Accessory Mounting Channels
ALS-A Horizontal support member used with ALE-1A, -2A, -2B and -3A series frame members for mounting ALM.ALM Vertical adjustable recessed panel mounting channel.ALS Horizontal support member used with ALE-1, -2 and -3 series frame members for mounting ALM.
SFS Extrusion Profiles
Note: Dimensions noted above are for reference only.
(Material: 6061-T6 aluminum per ASTM B221)
0.135" 3.43mm
0.135"3.43mm
0.135"3.43mm
0.135"3.43mm
0.250"6.35mm
0.015"0.38mmRADIUS
RADIUS
0.220"5.59mm
1.115"28.32mm
0.625"15.87mm
0.625"15.87mm
0.625"15.87mm
0.625"15.87mm
0.625"15.87mm
0.625"15.87mm
0.625"15.87mm
0.625"15.87mm
0.625"15.87mm
1.500"38.10mm
0.095"2.41mm
1.310"33.27mm1.500"
38.10mm
2.750"69.85mm
2.750"69.85mm
2.750"69.85mm
2.500"63.50mm
0.250"6.35mm
0.250"6.35mm
0.250"6.35mm
0.250"6.35mm
0.250"6.35mm
0.625"15.87mm
0.625"15.87mm
1.250"31.75mm
0.125"3.18mm
0.125"3.18mm
0.125"3.18mm
0.125"3.18mm
0.031"0.79mmRADIUS
0.015"0.38mmRADIUS
0.125"0.38mmRADIUS
0.015"0.38mmRADIUS
1.375"34.93mm
2.375"60.33mm
0.750"19.05mm
0.625"15.87mm
0.625"15.87mm
0.625"15.87mm
0.625"15.87mm
0.625"15.87mm
1.250"31.75mm
2.500"63.50mm
1.105"28.07mm
1.500"38.10mm
1.500"38.10mm
0.095"2.41mm
0.095"2.41mm
0.220"5.59mmRADIUS
1.310"33.27mm
1.310"33.27mm
ALS-A
ALM
ALS
ALE-1
ALE-2
ALE-3
ALE-4
ALE-2C
ALE-1A
ALE-2A
ALE-2B
ALE-2D
ALE-3A
ALE
SFS Extrusion Profiles