ALUMINUM ALLOYSTheir Physical and Mechanical Properties
VOLUME 4
Proceedings ofThe 6th International Conference
on Aluminum Alloys, ICAA-6
Toyohashi, Japan
July 5-10,1998
Editors:
T. Sato, S. KumaiT. Kobayashi and Y. Murakami
The Japan Institute of Light Metals
UB/TIB Hannover 89115 241 000
VI
OVERVIEW
VOLUME 1Opening Session and Keynote Lectures lInvited Lectures 4 9
Casting and Solidification 173Processing of Metal Forming 369Microstructures and Mechanical Properties 497Author and Keyword Index
VOLUME 2Phase Transformation and Physical Properties 601Plasticity and Strengthening 909Recovery, Recrystallization and Texture 1141Author and Keyword Index
VOLUME 3Fatigue, Creep and Fracture 1305Joining and Brazing 1433Corrosion and Surface Modification 1563Powder Metallurgy, Mechanical Alloying and
Rapid Solidification 1753Composite Materials 1847Alloy and Product Development, and Applications 1965Author and Keyword Index
VOLUME 4Welcome Address 2071Keynote Lecture 2075Invited Lecture 2089Casting and Solidification 2105Phase Transformation and Physical Properties 2115Recovery, Recrystallization and Texture 2141Fatigue, Creep and Fracture 2151Rapid Solidification 2161Author and Keyword Index
VII
CONTENTS
VOLUME 1
Committees iij
Preface v
Overview vi
Opening Session and Keynote Lectures
Early and Recent Research on Aluminum in Japan 3Y. Murakami
The Status of the Aluminum Industry in Japan 15E. Usui
Aluminum Alloys for Automobile Applications 25A. Morita
Bulk Amorphous and Nanocrystalline Al-Based Alloys with High Strength 33T. Masumoto and A. Inoue
Invited Lectures
Thixocasting of Aluminum Alloys: From Microstructure in the Semi-SolidState to Mechanical Properties 51
M. Sue'ry
Advanced Sheet Metal Forming of Aluminum Alloys 63H. Ohsawa and H. Nishimura
Control of Precipitation Processes and Properties in Aged Aluminum Alloys byTrace Element Additions 75
I.J. Polmear
Phase Diagram, Solidification and Heat Treatment of Aluminum Alloys 87C. Sigh, L. Maenner, C. Sztur and R. Shahani
Recovery and Recrystallization in Al Alloys Fundamentals and PracticalApplications 99
H.J. McQueen and W. Blum
VIII
Modelling Recovery and Recrystallization, Applied to Back-Annealing ofAluminium Sheet Alloys 113
J.A. Sceter, B. Forbord, H. E. Vatne andE. NesFracture Characteristics of Aluminum Casting Alloys 127
T. Kobayashi
Developments in the Friction Stir Welding of Metals 13 9E.D. Nicholas
Environmentally Assisted Cracking of Aluminum Alloys in Chloride Solutions 153R. Braun
Aluminum Alloy Chemistry-Microstructure Design and Realization withModeling 165
C.Q. Chen
Casting and Solidification
Continuous Cast Can Body Stock Alloy and Process Development 175R.G. Kamat
Strengthening Mechanisms in a Twin Roll Cast AA8006 Alloy 183B. Forbord, O. DaalandandE. Nes
Particle Coarsening and Subgrain Growth in a Twin Roll Cast AA8006 Alloy 189B. Forbord, O. DaalandandE. Nes
Fabrication of Thin Aluminum Alloy Slabs by Electromagnetic Casting 195S. Kamado, T. Kosaka, Y. Kabayama, Y. Kojima, T. Muramatsu andM. Matsuo
Characterization of Partially Homogenized 2x24 Ingot 201R.T. Shuey, T.N. Rouns, D.J. ChakrabartiandJ.L. Murray
A Model of Grain Refinement Mechanism for Adding Al-Ti-B Master Alloysinto Aluminum 207
H. Jin
Microstructure and Grain Refining Efficiency of TiC Particles in Al-Ti-CGrain Refining Master Alloys 213
CM. Small, P.B. Prangnell, F.H. Hayes and A. Hardman
The Effect of Scandium on the Solidification Behaviour of Aluminium Alloys 219A.F. Norman and P.B. Prangnell
Contents ix
Influence of Glass-cloth Size on Liquid Metal Distribution in the Sump of SlabDC Casting 225
K. Tokuda, M. Morishita and S. Oie
Prediction of Porosity Content and Distribution in AI-4.4%Mg DC Slab 231H. Nagaumi, K. Komatsu andN. Hagisawa
Evaluation and Application of Heat-Transfer Coefficients at the Die/SpotsSpray in Die Casting 237
S. Sanakanishi, Y. Ogawa, A. Barajima, K. Anzai andH. Kubo
Equilibrium between Silicon and Calcium in Molten Aluminum 243M. Nagao andS. Nishi
Filtration Behaviors of Inclusions in Liquid Aluminium with Rigid MediaFilter 249
S. Nawata, S. Ushino and E. Sagisaka
Influence of Molten Metal Flow on the Characteristics of Ingot Cast byMoving Mold Casting Process 255
H. Matsuzaki, K. Sakaguchi andK. Yoshikawa
Development of Injection Molding Technology Using Aluminum Sludge 261/. Fukumoto, S. Mekaru and T. Yonaha
Measuring Feeding in Aluminium Alloys 267T. Magnusson, P.A. Tondel and L. Arnberg
Accelerating Bridgman Solidification of Al-3wt%Fe Alloys Containinglwt%Cu, Mg, Si or 0.1wt%V 273
Y. Wang, H. Jones, P. V. Evans and R. Hamerton
A Model of the Interfacial Heat Transfer Coefficient During the SolidificationofanAl-Si Alloy 279
W.D. Griffiths
Analysis of the Thixoextrusion of Al-4.5wt%Cu Alloy 285B.C. Lancini, E.J. Zoqui andM. H. Robert
Semi-Solid Forming of A390 Hyper-Eutectic Aluminum Alloy 291R.S. Rachmat, N. Bunname, S. Kamado and Y. Kojima
Continuous Casting of Semisolid Al-Si-Mg Alloy 297T. Motegi, N. Ogawa, K. Kondo, C. Liu andS. Aoyama
Semi-solid Solidification Structure in Grain-Refined Al-7%Si-3%Cu Alloy 303K. Tahara, H. Tezuka, T. Sato and A. Kamio
Microstructure Changes of Partial Re-melting Reinforced A319 Alloy forDiesel Cylinder Heads 3 09
M. Kitamura, W-S. Liu, S.Tohriyama, T. Sato and A. Kamio
New Melting and Squeeze Casting System for High Quality Al Casting 315Y. Takebayashi, M. Tanahashi and T. Takahashi
Changes in Microstructure and Hardness during Properzi Process of 6151Aluminum Alloy Wire Rod for Forging 321
H. Takai, Y. Kishikawa, H. Anada, S. Saji, and A. Yoshida
High Speed Roll Caster for Aluminum Alloy Strip 327T. Haga, M. Kouda, T. Kobashi, H. Motoyama, N. Inoue and S. Suzuki
Influence of Solution Heat Treatment Time and Temperature on the EutecticSilicon Particles in AISi Foundry Alloys 333
L. Pedersen and L. Arnberg
The Quantitative Analysis of a -AlFeSi Ratio in a 6063 Aluminum Alloy Billetby X-Ray Diffraction 339
T. Minoda, H. Hayakawa and H. Yoshida
Nodularization of a -AlFeSi Compounds in Pure Aluminum 345T. Motoi, K. Fukuoka and H. Yoshida
Application of Fractional Crystallization for Refining of Molten AluminiumScrap 351
T. So tome andM. Ohtaki
Application of Some Vacuum Distillation Process to Refine Zn from AluminumScrap 357
M. Ohtaki and H.Kudou
Prediction of Butt Curl during EM Casting of Aluminium Ingots 363R. Biel, W. Boender, C. Castelijns, A. Burghardt andJ. Storm
Processing of Metal Forming
Microstructure and Deformation Resistance in Rolling of Aluminium Foil 3 71H. Abral, J. Kroc, W. Blum andJ. Hirsch
The Effect of Forming Condition on Ironing Formability of Can Body Stock 377K. Kuroda, M. Koide and T. Inaba
Controlling the Formability and Strength of Al-Mg-Si Alloys 3 83S.J. Harris, B. Noble, D.G. McCartney, X.J. Jiang and Y. Xie
Contents xi
Contribution to the Modelling of Microstructure Evolution duringThermomechanical Processing of Commercial Purity Aluminium 389
G. Liserre andM. Goncalves
Analysis of a Hot Rolling Schedule for Commercial AIuminium-1%Magnesium Alloy in Terms of Dynamic Material Modeling Concepts. Part I :Description of the Constitutive Behavior 395
E.S. Puchi, C. Villalobos andM.H. Staia
Analysis of a Hot Rolling Schedule for Commercial Aluminum-1% MagnesiumAlloy in Terms of Dynamic Material Modeling Concepts. Part H :Determination of the Power Dissipation Efficiency 401
E.S. Puchi, C. Villalobos andM.H. Staia
Concave Circular Spinning of Circular Tube Using Disk Tools 407M. Murata andR. Muta
Properties of Hollow Extrusion of High Strength Al-Mg-Si-Cu Alloy forAircraft 413
H. Sano, S. Tani, H. Yoshida, T. Minoda, T. Iwakami and Y. Yoshino
Indirect Tube Extrusion of Dispersion Strengthened Aluminium 419K.B. Mueller andE. Helium
The Influence of Microstructure on the Bendability of Al-Mg-Si Alloys 425M. Saga, M. Kikuchi, Y. Zhu andM. Matsuo
Extrusion with Changing Cross Section Shape of Tube 431M. Murata, K. Hasegawa andH. Kanafusa
Analysis of Square Tube Bending by MOS Bending Method 437M. Murata and T. Mochizuki
Draw Bending of Aluminum Pipes using Eccentric Plug 443S. Maki, K. Mori, T. Takeda and Y. Harada
Microstructures and Mechanical Properties of Submicrometer-Grained AlAlloys Produced by Equal-Channel Angular Pressing 449
Z Horita, T. Fujinami, M. Nemoto and T. G. Langdon
Effect of Temperature and Forming Rate on Formability of Aluminium Alloy5083 Sheet 4 5 5
T. Naka and F. Yoshida
Effect of Surface Coating Lubricity on Aluminum Fin-stock Formability 461Y. Ohta, K. Noda, K. Kamitani, Y. Mukai andK. Hatanaka
XII
Development of Hydro Mechanical Forming Technology using AluminumDamping Sheet for Deep Drawing Automotive Part 467
T. Sakurai and S. Yoshizawa
Shrink Hemming of Aluminum Alloy Sheet Metal 473M. Murata and T. Nada
Determination of Constants of Constitutive Hot Working Equations andProduction of Isothermal aX £ Curves for Al-Li Alloys 479
M. Goncalves andE.A. Simielli
Transmission Electron Microscopy of Ultraprecision and Precision Al-MgAlloy Machined Surface 485
T. Kaneeda, S. Yokomizo, K. Morimoto and I. Tsukuda
Drilling Temperature of Al-17%Si Alloy with HSS, Carbide and DiamondCoated Drills 491
Q. Liu, N. Matsuda, H. Notoya, S. Yamada, N. Takano, T. Oyama and I. Tsukuda
Microstructures and Mechanical Properties
Assessment of Scandium Additions in Aluminum Alloy Design 499H.G. Paris, T.H. Sanders, Jr. andY.W. Riddle
Impact Tension Properties in A2091 Aluminum-Lithium Alloy 505A. Takahashi, T. Kobayashi and H. Toda
Influence of Small Additions of Be and Zn on the Structure-PropertyRelationships in an Al-Li-Cu-Mg Base 8090 Alloy 511
V. Singh, A.K. Mukhopadhyay, K.S. Prasad, C.R. Chakravorty andS.NTiwari
Microstructure and Mechanical Properties of Al-2.5%Cu-0.23%Sc Alloy 517M. Nakayama, T. Okuyama and Y. Miura
Dislocation Substructures of Aluminium-Magnesium Alloys duringThermomechanical Processing 523
Q. Zhu and CM. Sellars
A New Method for the 3D Characterisation of Microstructure and Damageduring in situ Tensile Tests using Synchrotron X-ray Computed Tomography.Application to Al-based Materials 529
J-Y. Buffiere, E. Maire, P. Cloetens, J. Baruchel and R. Fougeres
Modelling Dispersoid and Constituent Particle Evolution in 3XXX Alloys 535J.P. SuniandR.T. Shuey
Contents xiii
Microstructure in Al-Ti Base Alloys Affected by a Repeated Working Process 541A. Kurihara and G. It oh
Determination of Intermetallic Compounds and Solid Solution in AluminumAlloys using ICP-AES after Chemical Isolation with Phenol 547
K. Kurusu, K. Tuyuki, S. Suzuki and R. Shouji
A Novel Light Optical Metallographic Technique for Revealing GrainStructures of Aluminum Alloys 553
H.S. Yang
Comparison of Solid and Tubular Specimens in Hot Torsion Testing of anAluminium Alloy 559
A. Johansen, B. Ronning andN. Ryum
Effect of Microstructural Variation on Mechanical Properties of HypereutecticAl-Si Casting Alloys 565
H. Kojima, T. Kobayashi, H. Toda and 0. Yao
Characterization by Synchrotron X-ray Microtomography of InternalMicrostructural Features and Their Detrimental Effects with Respect to theFatigue Properties in an Aluminium Cast Alloy 571
S. Savelli, J-Y. Buffiere, E. Maire andR. Fougeres
Formation of Homogeneous Ultra-fine Grain Structures in Aluminium Alloysby Equal Channel Angular Extrusion 577
A. Gholinia, J.R. Bowen, P.B. Prangnell and F.J. Humphreys
The Effect of Initial Grain Size on the Generation of High Angle Boundariesduring the Equal Channel Angular Extrusion of Aluminium to High Levels ofPlastic Strain 583
C. Harris, P.B. Prangnell andX.Duan
TEM Study of Precipitation in High-Strength 1987 Alloy Sheets AfterSuperplastic Forming 589
O.G. Senatorova, A.N. Uksusnikov, J.N. Fndlyander, J. Koshorst, R.R.Romanova, N.A.Ryazanova, A. Galliot and V. V. Cherkassov
Mn, Ti, Fe Effect on Hot Shortness of Al-Cu-Mg System Alloy Located inPhase Region a-S 5 9 5
E.F. Chirkov
Contents xv
Volume 2
Phase Transformation and Physical Properties
TTP and TTT Diagrams for Quench Sensitivity of 6013 Alloy 603V.G. Davydov, L.B. Ber, V.N. Ananiev, E. Ya. Kaputkin and V.I. Komov
Precipitation Behavior in Al-Mg-Si Alloys 609M. Takeda, T. Shirai, S. Suhmen, K. Fukui andM. Sakaguchi
Hardening Precipitates and Their Precursors in 7XXX-Alloys 615K. Stiller, V. Hansen,M. Knutson-Wedel, G. Waterloo and J. Gjonnes
Guinier-Preston Zone Formation in Al-Zn-Mg-(Cu, Zr) Alloys 621N.Q. Chinh, G Nemeth, A. Fekete andJ. Lendvai
Structure of G.P. Zone in Al-Mg2Si Alloys 627K. Matsuda, Y. Uetani, T. Sato, A. Kamio and S. Ikeno
Characterization by Electron Microscopy of Nucleation Sites and PhasesNucleated during Quenching of an AlZnMgCu Alloy 633
D. Godard, G. Lapasset and H. Odor
Precipitation Behavior in High Purity AI-300 PPM Fe Alloy 639A. Yamamoto, T. Kato, H. Tsubakino, K. Sugimoto and T. Yamanoi
3DAP Study of the Effect of Mg and Ag Additions on Precipitation in Al-Cu(-Li) Alloys 645
L. Reich, M. Murayama and K. Hono
Secondary Hardening in 2090 (Al-Cu-Li) Alloy 651X. Gao, J.F. Nie and B.C. Muddle
Age Hardening and Fatigue Strength of Two-Step Quenched Al-Zn Alloys 657A. Sakakibara and T. Kanadani
Application of Differential Scanning Calorimetry to the Processing ofAluminum Alloys 663
A.K. Gupta, A.K. Jena and D.J. Lloyd
Diffusion of Magnesium in Al-Zn-Mg Alloys 671S.I. Fujikawa
Formation of Voids in Quenched Aluminum Dilute (Cu, Mg, Si) Alloys 677Q.R. Chen, Y. Shimomura and I. Mukouda
Positron Annihilation Study of Vacancy Dynamics after the SolutionTreatment of Al-Zn-Mg Alloys 683
R. Ferragut, A. Somoza and A. Dupasquier
Influences of the Third Elements (Mn,Si,Ge) on Aging Process in Al-Cu Alloy 691M. Takeda, Y. Maeda, A. Yoshida, M. Ota andM. Murakami
XVI
Effect of Li Content on Aging Responses and Mechanical Properties of an Al-Mg-Si Alloy 697
B.C. Wei, Z. Huang, Y.G. Zhang, C.Q. Chen, O. Reixach and V. Ji
Thermodynamic Analysis of Li-containing Al-Mg-Si Alloys 703R. Chen, J.Y. Shen, W.D. Zhuang, Z. Huang, Y.G. Zhang and C.Q. Chen
Pre-precipitation and Two-Step Aging Behavior of Al-Mg-Si Alloys 709K. Yamada, T. Sato and A. Kamio
Effect of Homogenizing Treatment of Al-Fe-Si Intermetallic Phases in a 6063Aluminum Alloy 715
T. Sugawara, H. Tanihata, K. Matsuda and S. Ikeno
Precipitation of Transition Elements during Homogenization of Al-Mg-Si-CuAlloy Billets 721
T. Tsuchida and S. Okaniwa
Application of Quench Factor Analysis to A356.0 and A357.0 Foundry Alloys 727P.A. Rometsch, G.B. Schaffer, J-Y. Yao andM.J. Couper
Age Hardening Response of AlSiMg Foundry Alloys 733Y. Langsrud and S. Brusethaug
Effects of Cu and Ag on Precipitation in Al-4Zn-3Mg(wt.%) 739S.K. Caraher, I.J. Polmear and S.P. Ringer
Influence of Predeformation on Precipitate Coarsening in Al-Zn-Mg-Cu Alloys 745J.A. Sceter, G. Waterloo and W.J. Poole
Dynamic Precipitation in Al-Mg- and Al-Mg-Si Alloys 751T. Pettersen, K. Nord-Varhaug and E.Nes
Precipitation Sequence during Ageing of an Al-4.2wt.%Mg-0.6wt.%Cu Alloy 757P. Ratchev, B. Verlinden, P. De Smet and P. Van Houtte
Enhanced Precipitation Hardening in Al-Mg(-Ag) Alloys 763M. Kubota, J.F. Nie and B.C. Muddle
Order Structure in the Early Stage of Phase Separation in Al-Li Alloys - aMonte Carlo Study 769
H. OkudaandK. Osamura
Quantification of 6' Precipitation Occurring during Low TemperatureExposure of Binary Al-Li Alloys 775
B. Noble, S.J. Harris and K. Dinsdale
Mechanical Properties and Electrical Conductivity in Solution Treated Al-Fe-Co Alloys 781
A. Niikura, T. Doko andK. Ishikawa
The Decomposition Process in Rapidly Quenched AILiSc Alloys 787U.Schmidt, A.L.Beresina andA.D. Rud
Contents xvii
Precipitation Kinetics and Mechanisms in Binary Al-Sc Alloy 793J. Roy set andN. Ryum
Effect of Sc-Addition on the Precipitation Behavior of an Al-Li-Mg-Cu Alloy 799C-H. Joh, T. Katsube, K. Yamada and Y. Miura
Kinetics of Precipitation in Al-0.20 mass% Sc Alloys 805S.-I. Fujikawa and S. Sakauchi
A Calorimetric Study of Precipitation Process in 2 Steps Aged Al-Mg-Si Alloys 811S.-I. Fujikawa and T. Gotoh
Differential Scanning Calorimetry Study on AA6016 Alloy 817R. de Haan, L. Zhuang, P. De Smet, J. Bottema and W.S. Miller
Thermodynamic Factor in FeAl D03-phase Interdiffusion from X-ray DiffuseScattering 823
V. Liubich, S. Dorfman, D. Fuks andH. Mehrer
Effect of the Precipitation on the Thermoelectric Power of Al-Mg-Si Alloys:Application to the Study of the Precipitation Kinetics 831
V. Massardier, T. Epicier and P. Merle
Atom Probe Characterization of Preprecipitate Clusters and Precipitates in Al-Mg-Si(-Cu) Alloys 837
M. Murayama and K. Hono
Microstructural Characterisation of Some Al-Mg-Li-Si Alloys 843W.I. Romero andH.M. Flower
Precipitation Behavior in Two Step Aged Al-Mg2Si Alloy Containing Silicon inExcess 849
T. Kawabata, K. Matsuda, T. Naoi, T. Sato, A. Kamio and S. Ikeno
The Effect of Trace Additions on the Precipitation Microstructure of an Al-4.1Cu-1.6Mg Alloy 855
L.M. Rylands, W.M. Rainforth and H. Jones
The Crystal Structure of £ "- phase in Al-1.0mass%Mg2Si-0.4mass%Si Alloy 861T. Naoi, K. Matsuda, T. Sato, A. Kamio and S. Ikeno
Corrected Nordheim's Law for Aluminum Base High Concentration SolidSolutions 867
S. Komatsu, M.Ikeda, T. Kohmoto and H. Yukimachi
Electronic Structures of Precipitate-Hardening Phases in Aluminium Alloys 873M. Kishimoto, H. Yukawa andM. Morinaga
Hydrogen Transport in a 5083 Aluminum Alloy 879T. Ihara and G. Itoh
Effect of the Surface Layer on the Fatigue Strength of an Al-3mass%Mg Alloy 885T. Tanimoto, A. Sakakibara, N. Hosokawa, N. Nishida and T. Kanadani
XVIII
Effects of a Small Addition of Fe on Low Temperature Age-Hardening andFatigue Strength of an Al-12mass%Zn Alloy 891
K. Nakagawa, T. Kanadani, N. Hosokawa and T. Tanimoto
Phase Transformation Study of Two Aluminium Strip-Cast Alloys 897M. Sldmovd, V. Oienaiek, P. DvotakandZ. Jufidek
A DSC Study of Precipitation in Al-Cu-Mg Alloys 903G. Riontino, S. AbisandC. Bottero
Plasticity and Strengthening
Quasistatic Deformation Behaviour of Dispersion Hardened AluminiumMaterials 911
/. Kropfl, K-H. Lang, O. Vohringer and E. Macherauch
Plastic Deformation and Dislocations in Al-Based Cubic Intermetallics 917K. Fukunaga, M. Hashimoto, K. Yamada and Y. Miura
Superplastic Forming of a 6XXX Aluminum Alloy 923L.P. Troeger andE.A. Starke, Jr.
The Development of Hierarchical Dislocation Substructure in AluminiumDeformed at an Elevated Temperature 931
P. Cizek, B.P. Wynne, M. Kubota andB.A. Parker
The Properties of Semiproducts of 1460 Alloy (Al-Cu-Li-Sc) and 1421 Alloy(Al-Mg-Li-Sc) at 293K and 77K 93 7
J.N. Fridlyander and W. Bozich
On the Strengthening of Aluminium Alloy 6056T6 943M. Vivas, P. Lours, C. Levaillant, M-J. Casanove, A. Couret and A. Coujou
Intermediate to Very High Strain Rate Behaviour of Aluminium Alloys 949L. Djapic Oosterkamp, T. Furu, H.E. Vatne and A. Ivankovic
Strength Ductility and Fractal Characteristics of an Al-0.57Si-2.03Ge Alloy 955O.A. Hilders
Effect of Alloying Elements on High-Strain-Rate Behaviour in Recycled Al-Fe-Si System Alloys 961
F. Westvold, B. Andersson, Y. Langsrud and J.D. Evensen
Statistical Analysis of Serration Size in Al-Li Single Crystals 967
B. Tian, C. Chen and Y. Zhang
Yield Point Elongation in Al-Mg Alloys 973A. Inagaki, T. Komatsubara and H. Inagaki
Plastic Instabilities in Al-Cu, Al-Mg and Al-Si Alloys Investigated by DynamicUltra Micro-Hardness Testing 979
N.Q. Chinh, F. Csikor, G. BercesandJ. Lendvai
Contents xix
The Heat Treatment Effect on Thermal Stability of Al-Li Alloys at LowTemperatures 985
V.G. Davydov, L.B. Ber, V.N. Ananiev, A.I. Orozov andM.V. Samarina
Effect of Solute Concentration on Work Hardening by Cold Rolling 991S. Komatsu, M. Ikeda, T. Miyashita, H. Yukimachi and T. Ikeda
FE Analysis of Damage Evolution during the Deep Drawing of TexturedAluminum Sheets 997
J.G. Hu, T.Ishikawa, J.J.Jonas, N.Yukawa andK. Ikeda
STM Observation of Localized Deformation Near Grain Boundaries in Al-lmass%Mg2Si Alloys with Various Amount of Copper 1003
F. Ohara, Y. Uetani, K. Matsuda, F. Shinagawa and S. Ikeno
The Effects of Magnesium and Copper Contents on the Restoration duringHot Deformation of Al-Mg-Cu Alloys 1009
K. Takiguchi, H. Uchida and H. Yoshida
Effect of Impurity Content on the Initial and Saturation MechanicalThreshold of Aluminum 1015
E.S. Puchi, C. Villalobos, M.H. Staia and J. Machado
Effects of Traces Calcium and Strontium on Hot Ductility of an Al-5.5mol%Mg Alloy 1021
K. Horikawa, S. Kuramoto andM. Kanno
High Temperature Erichsen Tests of Aluminum Alloy Sheets 1027M. Sugamata, J. Kaneko andM. Numa
Mechanical Softening Kinetics at High Temperatures in an AlMgZnCu Alloy:Experimental Characterization and Microstructural Interpretation 1033
D. Godard, P.Archambault, J.P. Houin, E. Gautier andF. Heymes
Impact Tension Testing of Sheet AI Alloys for Automobile Structural Uses 1039T. Yokoyama and K. Ohkubo
Effect of Recrystallization Temperature on Microstructures andSuperplasticity of 2091 Al-Li Alloy 1045
B-J. Zhang, M-G. Tseng, X-J. Niu and S-P. Ge
Superplasticity over Wide Ranges of Temperature and Strain Rate in a 5083Aluminum Alloy 1051
Y. Takayama, T. Tozawa, H. Kato, H. Watanabe andM. Kokubo
Microstructure Evolution of an Al-Zn-Mg-Cu Alloy during SuperplasticDeformation 1°5 7
D. Jiang, Y. Guo, X. Liu, X. Yang, Y. Cui and T. Imai
The Effect of SiC Particles Volume Fraction on Hot Deformation Behavior ofA A 2024 Composites Reinforced with SiC Particles 1063
B-C. Ko and Y-C. Yoo
XX
The Effect of Hardening Heat Treatment on the Tensile Strength and Earingsof AA 3104 Aluminum Alloy Sheet 1069
Y.H. Chung, K.K.Cho, C.W. LeeandM.C. Shin
Paint-Baking Properties of Al-Mg Alloys with Addition of Cu 1075B. Verlinden, P. Ratchev, P. De Smet and P. Van Houtte
Effect of Thermal Exposure on the Strength-Toughness Behavior of ElevatedTemperature Service Aluminum Alloys 1081
M.S. Domack, D.L. Dicus, R.A. EdahlandD. J. Chellman
Effects of Mm (Misch Metal) Addition on Precipitation Behaviors in Al-Mg-SiAlloys with Excessive Mg. 1087
S-D. Park, J-B. Seo andH-K. Cho
Influence of Temperature and Strain Rate of Tensile Test on Serration in 2017Aluminum Alloys 1093
Y. Yamaaa and H. Inagaki
Mechanical Strength of Single Riveted Lap Joint Al Plates with FlowdrillOperation 1099
H. Kagawa and K. Satoo
High Strength 7XXX Alloys for Ultra-Thick Aerospace Plate: Optimisation ofAlloy Composition 1105
R. Shahani, T. Warner, C. Sigli, P. Lassince and P. Lequeu
Effect of Thermo-Mechanical Treatment on Strength and Ductility of 2024A1-3Fe-5Ni PM Alloy 1111
T. Aida, K. Matsuki, R. Kitano, T. Yokote, J. Kusui andK. Yokoe
Flow Stress Behaviour of AlZnMg Alloys at Temperatures Close to the SolidusTemperature 1117
B. Ronning and N. Ryum
Strain Rate Dependence of Impact Tensile Properties in 6061 Aluminum Alloy 1123S. Morita, T. Kobayashi and H. Toda
Superplasticity of 1N90 Pure Aluminum Based Composites and theThermomechanical Processing 1129
S. Kojima, D. Jiang, T. Imai, J. Mao, G. L'esperance andB. Hong
Superplasticity and Superplastic Deformation Mechanism of a SiCp/2024 AlComposite 1135
Y. Yan, B. Liu and C-B. Zhang
Recovery, Recrystallization and Texture
Orientation Relationships between Recrystallized Grains and Multiple SlippedStructure in Aluminum Single Crystals 1143
K. Kashihara, M. Tagami andF. Inoko
Contents xxi
Evaluation of Active Nucleation Mechanisms during Annealing of CommercialPurity Aluminium 1149
L. Rabet, I. Samajdar, B. Verlinden and P. Van Houtte
Work Hardening Anisotropy Generated by Cube Texture in CommercialPurity Aluminium 1155
B.P. Wynne, P.Cizek, C.H.J. Davies, M. Kubota andB.A. Parker
Formation of Shear Texture in A5052 Sheet by Single-Roll Drive WarmRolling 1161
T. Sakai, S. Hamada and Y. Saito
Cube Texture Evolution during Hot Plane Strain Compression of Al-MgAlloys 1167
F. Basson, B. Chenal, C.T. Necker, J.D. Embury and J.H. Driver
Grain Growth Behavior of Al-Mg Alloys 1173K. Matsumoto, H. Morisada, T. Shibayanagi and Y. Umakoshi
Control of Recrystallization in Al-Mg-Sc-Zr Alloys 1179Y. W. Riddle, H.G Paris and T.H. Sanders, Jr.
The Annealing Response of Cold Worked 6000 and 7000 Series AluminiumAlloys 1185
M.R. Clinch, S.J. Harris, W. Hepples, N.J.H. HolroydandJ.V. Wood
Influence of Recrystallisation on Properties of AA7010 Thick Plate 1191N-E. Andersson and S. Johansson
Thermal-Mechanical Processing of Electrical Conductor Grade Aluminum toInduce Continuous Recrystallization 1197
H. Jin, J. Li and S. Saimoto
The Effect of Dispersoids on Recrystallization Kinetics and Grain Structure inHot Deformed AA3004 1203
J.P. Suni, R.D. Doherty, P.A. Hollinshead, T.N. RounsandR.T. Shuey
Texture Variation at Hot Rolling Gauge of AA1050 Alloy and its Effect onEaring Behaviour 1209
L. Zhuang, D. Sampath, T.J. Hurd, B. CharotandP. De Smet
Influence of Secondary Rolling Direction on Recrystallization Textures ofCommercial Purity Aluminum 1215
T. Murakami and S. Okabe
Microstructure and Texture Evolution during Hot Deformation of an AlMgSi-Alloy 1221
T. Pettersen and E. Nes
Effect of Original Grain Size on Static Recrystallisation of Al-lMg during HotRolling 1 2 2 7
P.L. Orsetti Rossi and CM. Sellars
XXII
Effect of Magnesium Content on Hot Deformation and SubsequentRecrystallisation Behaviour of Aluminium-Magnesium Alloys 123 3
G. J. Baxter, Q. Zhu and CM. Sellars
EBSP Analysis of Microstructure in Recrystallized Al-Mg Alloy and ItsApplication to Grain Growth Simulation 1239
T. Shibayanagi, S. Katayama, M. Maeda andM. Naka
Rolling and Recrystallization Textures in Al-high Mg Alloys 1245M. Koizumi, H. Inagaki and S. Kohara
Behaviour of Partially Recrystallised Structures of AI-lMg during MultipassHot Rolling 1251
P.L. Orsetti Rossi and CM. Sellars
Effect of Solute Drag on Softening during Annealing of Commercial PurityAluminium: Experimental Investigations and Modelling Treatment 1257
HE. Vatne, T. FuruandE. Nes
Industrial Hot Rolling of an AA3004 Alloy; Experimental Investigations andModelling of Recrystallisation 1263
H.E. Vatne, A. Oscarsson andH-E. Ekstrom
Effect of Fe Content on Recrystallization Textures of High-purity Aluminum 1269/. Arai, M. Koizumi andH. Inagaki
Influence of Deformation Parameters on Deformation and RecrystallizationTexture in Al-Mg-Si Alloys 1275
B. Davis, F.J. Humphreys, K.M. Gatenby and C.P. Johnson
Texture Development during Cold Rolling omnidirectionally SolidifiedAluminum 1281
Y. Kaneno, H. Kikumoto andN. Inakazu
Response of AA 8006 and AA 8111 Strip-Cast Cold Rolled Alloys to HighTemperature Annealing 1287
M. Sldmovd, V. OdenaSek, P. Dvofak and Z. Jutidek
Recovery of AIMg Alloys: Fundamental Aspects in Relation with MechanicalProperties 1293
M. Verdier, Y. Brechet and P. Guyot
The Texture and Mechanical Properties of Al-Li Alloy Semiproducts 1299l.N. Fridlyander, V.F. Shamrai, A.A. Babareko and O.A. Setiukov
Contents xxiii
Volume 3
Fatigue, Creep and Fracture
Effects of Microstructure on Low Cycle Fatigue Properties in HIP Treated Al-Si-Mg Base Cast Aluminum Alloys 1307
S. Kumai, K. Katsumata and A. Sato
Heterogeneity and Anisotropy of Mechanical and Fatigue Properties of High-strength Aluminum Extrusions 1313
V. Odenasek, K. Sperlink, P. Zuna and K. Macek
Fatigue Strength Characteristics of Quasi-crystal Aluminum Alloy with andwithout SiC-Particle Dispersion 1319
S. Adachi, T. Kubota, T. Kohno, M. Otsuki, M. Miyahara, J. Nagahora, K.Kita,T. Matsuda, M. Oguchi, S. Takeda, T. Hoshi, Y. Horio and A. Inoue
The Effect of Solidification Rate on the Fatigue Properties of the AluminumAlloy Castings 1325
Y. Kuroki, T. Tanaka, T. Sato and A. Kamio
Tensile and Fatigue Fracture Behavior of Spot Welded Aluminum Sheet Alloysfor Auto Body Application 1331
SB. Kang, H. W. Kim, D.Jiang, K. W. Nam and S T. Lee
Acoustic Emission and Finite Element Analysis of Crack Nucleation andPropagation in Fatigue of Al 7010 Alloy 1337
M.A. Gharghouri, N. Godin, E. Maire andR. Fougeres
Plain Strain Fracture Toughness, KIC, of Al-Li Alloys 1343T. Tsuchida, M. Niinomi, M. Ibaragi, H. Yoshida, K.Okada
Y. Miura andM. Kanno
Elastic-Plastic Fracture Toughness, JIC of Al-Li Series Alloys 1349M. Niinomi, T. Tuchida, M. Ibaraki, H. Yoshida, K. Okada
Y. Miura andM. Kanno
Creep Strength around 600K of Two Terminal Phases in Al-Mg BinarySystem 1355
H. Sato, K. Maruyama and H. Oikawa
Evaluation of Creep Behavior of Emerging Aluminum Alloys for SupersonicAircraft Applications 1361
K.M.B. Taminger, D.L. Dicus, D.J. Chellman, S.M. Kazanjian andN. Wang
Effect of Trace-elements on Creep Behavior of Pure Aluminums at a LowTemperature 1367
M. Maehara, K. Ishikawa and Y. Kobayashi
Fatigue Behavior in Al-Si-Cu Die Cast Alloys 1373Q. Yao, T. Kobayashi, H TodaandS. Kitaoka
XXIV
Creep Behavior of Thin Foil of Low-Alloyed Aluminum for MicroelectronicCircuit 1379
T. Yamashita, G. Itoh and T. Nitta
Ultrasonic Fatigue in Polycrystalline Aluminum 1385A. Yamamoto, H. Tsubakino and T. Imanaka
Fatigue Crack Growth Properties of Al-Si-Mg Base Cast Aluminum Alloys 1391S. Aoki, S-W. Han, S. Kumai and A. Sato
Thermal-Mechanical Fatigue Behaviour of Cast Aluminium Alloys 1397B.Flaig, K-H. Lang, T. Beck, D. Lohe andE. Macherauch
Fretting Fatigue Strength of Al-Si Alloy for Trucks and Buses Wheels 1403O. Ebihara, T. Nishida, Y. Mutoh, K. Yoshii andS. Miyashita
Effect of Extruding Temperature on Creep Behavior of Spray-formingProcessed Al-8wt%Fe Alloys 1409
N. Oiwa, T. Imai, S. Kumai, A. Sato and T. Matsuo
Application of a Small Punch Test to the Evaluation of Deformation andFracture Characteristics in a 2091 Aluminum Alloy Plate 1415
H. Kato, T. Tozawa, Y. Takayama, H. Watanabe and T. Takahashi
Fatigue Crack Propagation Behavior of the Al-Alloy 6013 under VariableAmplitude Loading in an Aggressive Environment 1421
H. Sato, G. Lutjering and A. Gysler
Influence of Variable Amplitude Loading on Fatigue Crack Propagation of Al7475 1427
J.O. Peters, A. Gysler and G. Lutjering
Joining and Brazing
A Study of Microsegregation Effects in TIG and Laser Beam Welds of an Al-Cu-Mg Alloy 1435
A.F. Norman and P.B. Prangnell
Microstructure and Mechanical Properties of Simulated Al-Mg-Zn WeldMetal Modified with Sc and Zr 1441
C.E. Cross and 0. Grong
Static and Dynamic Properties of Joints in Thin-Walled AluminiumExtrusions, Welded with Different Methods 1447
J. Hags from andR. Sandstrom
Stud Welding for Aluminum Rolled Product by Arc and Friction Welders 1453
R. Ikeo, T. Shiroshita and T. Saito
Study of Liquid Film Migration in O-temper AA3005 brazing Sheet 1459
A.J. Wittebrood, R. Benedictus and K. Vieregge
Properties of Al-Si-Cu-Zn Brazing Filler 1465K. Okada, T. Doko, K. Ishikawa and T. Toyama
Contents xxv
Characteristics of Friction Stir Welds in AA 5083 and AA 6082 Aluminium 1471H. Larsson, L. Karlsson and L-E. Svensson
Process Modelling Applied to Friction Stir Welding of Al-Mg-Si Alloys 14770. Frigaard, B. Bjomeklett, 0. Grong and O. T. Midling
Microstructural Development in Friction Stir Welding of Aluminum Alloys 1483H.S. Yang
The Effect of Zinc Additions on the Corrosion Properties of Aluminium-Magnesium Alloys 1489
R. Dif, J-C. Ehrstrom and G-M. Raynaud
Electron Beam Welding of Al-Cu-Mg and Al-Li-Cu Alloys Texture 1495M. Ohkubo, M. Hara, M. Sugamata andJ. Kaneko
Grain Boundary Melting in Al-Cu-Mg Alloy Welds 1501P.B. Prangnell and A.F. Norman
Evaporate Phenomena of Mg in Vacuum Brazing of Aluminum 1507Y. Inabayashi and K. Ishikawa
Test Method for Evaluating a Brazeability and Erosion Behavior of AluminumBrazing Sheet with Erichsen Formed Specimen 1513
A. TsurunoandJ. Takigawa
Impact Tensile Strength of Friction Welded Joints between 6061 Al Alloy andS45C Steel 1519
T. Yokoyama and M. Yamaguchi
Mechanical Properties of Friction Welded Joints between DissimilarAluminum Alloys 1525
K. Katoh and H. Tokisue
Modelling of Local Melting during Friction Stir Welding of Al-Zn-Mg Alloys 1531B.I. Bjerneklett, 0. Frigaard, 0. Grong, O.R. Myhr andO.T. Midling
Characteristics of Reciprocating Slide Adhesion of Aluminum Metal 1537S. Maki, Y. Harada andK. Mori
Electrochemical Properties of Al-Si Alloys Brazing Filler 1543S. Kuroda and K. Tohma
Brazing of Al-Mn-Mg Alloys with CsF-AlF3 Non-corrosive Flux 1551T. Takemoto, T. Shibutabi and A. Matsunawa
Effect of Heat Input on Friction Welded Joint Performance of 6061 AluminumAlloy I 5 5 7
T. Sawai, K. Ogawa, R. Tsujino and Y. Suga
XXVI
Corrosion and Surface Modification
The Impact of Energy-filtering Transmission Electron Microscopy for theStudy of Corrosion and Filming Behaviour of Aluminium Alloys 1565
K. Shimizu, G.M. Brown, H. Habazaki. K Kobayashi, P. SkeldonG.E. Thompson and G.C. Wood
Insight into the Corrosion and Filming Behaviour of Aluminium and Its Alloys 1571X. Sun, X. Zhou, G.E. Thompson, P. Skeldon, K. Shimizu
R.C. Furneaux and G. Scamans
Influence of Alloying Additions on Corrosion Behaviour of AluminiumBrazing Sheet 1577
R. Benedictus, S.D. Meijers, A.J. WittebroodandJ.H.W. de Wit
6056 Alloy: Study of the Corrosion Behaviour of Coarse Intermetallic Particlesin Chloride and Sulphate Media Through Phase Shifting InterferometricMicroscopy Observations 1583
V. Guillaumin, C. Blanc, Y. Roques and G. Mankowski
In Situ Monitoring and Modelling of Pitting Corrosion on 2024 Aluminum 1589J. M. Olive, S. Cabrol and T. Jaszay
Influence of Copper on the Sacrificial Behaviour of Al-Sn Alloys 1595S.J. Harris, D.G. McCartney, A.J. Horlock andA.H. Dent
Improvement of Waterside Corrosion Resistance and Problems in FieldApplication of Aluminum Radiator Tubes 1603
H. Tanaka, K. Katoh and H. Ikeda
Microbiologically Influenced Corrosion of Aluminium Alloys in Water-FuelSystems 1609
X. Wu, J. Liu, X. Chen and Y. Yang
Corrosion Resistance of Aluminium-Magnesium Alloys for the Marine Market 1615R. Dif T. Warner and G-M. Raynaud
New Retrogression and Reaging Process for High Strength and High StressCorrosion Resistance 7050 Aluminum Alloys 1621
M. Nakai and T. Eto
High Temperature Oxidation of Extruded Aluminium Alloys 1627W. Van Rijswijk
Effects of the Processing and Magnesium Contents on the Color of AnodizedAl-Mn Sheets 1633
M. Matsuo, K. Okada, T. Muramatsu andM. Maejima
Development of Aluminum Anodized Coating with Excellent ThermalProperties 1639
M. Takaya, M. Maejima andK. Sarvwatari
Contents xxvii
Improvement of Efficiency on CO2 Laser Working of Aluminum Alloys bySurface Treatment 1645
N. Nishida, S. Kunitsugu, T. Kanadani, T. Ooie andM. Yoneda
Characteristic Corrosion Nature of Aluminum Containing Iron in NaClEnvironments 1651
O. Seri
Effect of Zn Addition on Intergranular Corrosion Resistance of Al-Mg-Si-CuAlloys 1657
K. Yamaguchi andK. Tohma
Corrosion Behaviour of 2024 T351 and 6056 T6 Aluminium Alloys in ChlorideSolution 1663
V. Guillaumin and G. Mankowski
Exfoliation Corrosion Resistance of Near Peak-aged AA7449 as a Function ofQuench Speed and Ageing Treatment 1669
T.J. Warner, R. Dif P. Lassince and P. Lequeu
Cooperative Research on Standardization of Test Method for ExfoliationCorrosion Susceptibility in Al-Li Series Alloys (1st Report) 1675
A. Hotta, H. Hira, S. Jyogan, M. Ibaragi, K. Tohma, S. OsakiT. Ohnishi andM. Kanno
Cooperative Research on Standardization of Test Method for ExfoliationCorrosion Susceptibility in Al-Li Series Alloys (2nd Report) 1681
T. Ogisu, M. Sasajima, T. Tsuchida, K. Okada, Y. Nakai, S. OsakiT. Ohnishi andM. Kanno
Effect of RRA Treatment on SCC Susceptibility of Al-l.lMg-l.0Si-0.5Cu Alloy 1687
Y. Katoh, K. Tomita, M. Sakaguchi and Y. Nakazawa
A Mechanistic Experiment on Stress Corrosion Cracking Process in 8090Aluminum-Lithium Alloy 1693
S. Osaki, M. lino andK. Kaminishi
Morphology and Capacitance of AC Etched Aluminum Foils under VariousEtching Conditions 1699
S-Y. Jeong, J.H. Seo, J.H. JeongandD.N. Lee
The Effect of Surface Oxide Film on Etching in High Purity Aluminum Foil 1705M Sakata, M. Sakurai, T. Ohwaki and T. Nishizawa
Effect of Ni Addition on Electrograining Properties in 1050 Aluminum 1711M. Tanigawa, S. Hosono and K. Hoshino
Thermal Cracking of Anodic Coatings on Aluminum Alloys 1717Y. Suzuki and S. Goto
Surface Modification of Aluminum Alloy with Nd-YAG Laser 1723M. Enomoto and S. Kokubo
XXVIII
Improvement of Wear Resistance of Aluminum Alloy by PTA SurfacingProcess 1 7 2 9
T. Shinoda, S-H. Kang, Y. Katoh andM. Kunieda
Lining of Aluminum Alloys with Hard Metal Foils Using Shot Peening 1735Y. Harada, K. Mori andS. Maki
Swell-Peeling Method for Aluminum Can Paints 1741K. Fujisawa, T. Takahashi, K. Oosumi and T. Nakamura
Surface Modification of Aluminum Die Casting ADC12 Alloy 1747M. Tagami, A. Muto, S. Hanada, M. Matsubara, S. Kamada andS. Yamagata
Powder Metallurgy, Mechanical Alloying and RapidSolidification
Microstructure Control of Super-high Strength Aluminium Alloys 1755K. Osamura, H. Adachi, H. Okuda, S. Ochiai, J. Kusui andK. Yokoe
Investigation of Amorphous Al-alloys with Neural Network 1761B. Schmidt
The Kinetics of the Amorphous-Crystalline Transition in AIDyT-Alloys 1765U.Schmidt, Ch.Eisenschmidt and A.M. Zahra
The Effect of Mechanical Milling, Consolidation Route and Prolonged HeatTreatment on the Microstructure and Properties of a Rapidly Solidified Al-Mn-Si Alloy 1771
R. Hambleton, H. Jones and W.M. Rainforth
Characteristics of Super-high Strength Al-Zn-Mg-Cu P/M Alloys 1777J. Kusui, K. Yokoe, K. Osamura, H. Adachi, H. Okuda and Y. Tomii
Gradient Ejection Melt Spinning and Puddle-less Melt Spinning Process forAluminum Alloy Foil Rapid Solidification 1783
T. Haga, K. Matsuoka and S. Takeuchi, D. UejimaandY. Ishibashi
A New Structural Material For Vibration Damping-RS/PM Al-Li Alloy 1789Z.Q. Zhou, X.J. MiandX.D. Zhu
The Microstructure and Effect of Rare-earth in Thermal-stable Al-basedNanocomposite Ribbons 1795
M.K-Tseng, H. Pang, B.J. Zhang, J.X. LinandJ.N. Deng
Effect of Rapid Solidification on the Structures and Mechanical Properties ofAl-Si based Casting Alloys 1799
J. Kaneko, Y. Kawaguchi andM. Sugamata
Structures and Mechanical Properties of Rapidly Solidified AI-5~13%Mg-2~13%Si Ternary Alloys 1805
H. Fujii, M. Sugamata, J. Kaneko andM. Ohkubo
Contents xxix
Valence Electron Structure Analysis of Tetragonal Phase Al8Fe4Nd in RapidSolidified Al-Fe-V-Si-Nd Alloy 1811
J.X. Lin, H. Pang, B.J. Zhang, M.K. Tseng, C.F. Qian andX.F. Chen
Response to Thermal Exposure of the Mechanically Alloyed Al-Ti/C Powders 1817Y. Birol
In-Situ Preparation of Boride-Particle-Dispersion-Strengthened AluminumAlloys by Mechanical Alloying 1823
T. Takahashi, K. Yamada andM. Motoyama
Structure Changes of Al/Pb and Ag/Pb Powder Mixtures during MechanicalAlloying 1829
T. Ohashi and H. Hosoe
High-strength Al-based Alloys with Nanogranular Amorphous and FCC-A1Phases 1835
H. Kimura, K. Sasamori and A. Inoue
Al-based Nanoquasicrystalline Alloys with Good Cold Workability and HighImpact Fracture Energy 1841
A. Inoue, H. Kimura, K. Sasamori andK. Kita
Composite Materials
Reactive Synthesis of TiC/Al Composite and Its Mechanical Properties 1849M Kobashi and T. Choh
Comparative Extrudability of 6061 Alloy and 15 vol % SiC ParticipateComposite 1855
E.M. Herba and H.J. McQueen
Microstructure and Mechanical Properties of Carbon Nanotube ReinforcedAluminum 1861
T. Kuzumaki, K. Miyazawa andK. I to
Elaboration and Evaluation of Carbon Fiber Aluminium Composites forAerospace Applications 1867
J. Pora, P. Le Vacon andM. Rabinovitch
Numerical Analysis of Crack Initiation and Propagation Behavior inAluminum Matrix Composites 1873
H. Toda, T. Kobayashi and T. Goda
Superplastic Forming Behaviour of Aluminium Based SiCp Reinforced MetalMatrix Composites 1879
CM. Styles, N.J. Lindsay and A. Tarrant
Effect of Interfacial Reaction on Strength of AI,gB4O33 Reinforced Al-alloy
Composites I 8 8 5
J. Pan, H. Fukunaga, G. Sasaki, L-J. YaoandK. Kamoto
Mechanical Properties of a 2618/TiB2 In-Situ Metal Matrix Composite 1891C. Bartels, L. Stegelmann, M. Crumbach and G. Gottstein
XXX
Effect of Volume Fraction on Aging Process of SiC Particle Dispersed Al-Mg-Si Alloy Based Composite Materials 1897
M. Araki, S. Ikeno K. Matsuda, F. Shinagawa and Y. Uetani
Deposition of M.M.C. Coatings onto Aluminum Alloy Plate Using FrictionCoating 1903
T. Shinoda and J. Li
Aluminum Matrix Carbon Fiber MMC 1909J. Ninomiya and A. Hideno
Cold Rolling and Annealing of Particle Reinforced Aluminum MatrixComposite 1915
N. Kanetake, T. Kaneko and T. Choh
High Strain Rate Superplasticity of a SiCp/6061 Aluminum Alloy CompositeMade by a Vortex Method 1921
T. Hikosaka, T. Imai and T. Kobayashi
Quantification of the Effects of Reinforcement Distribution and Morphologyon Fatigue in Al-SiCp Composites 1927
J. Boselli, P.D. Pitcher, P.J. Gregson and I. Sinclair
The Deformation Behaviors of A12O3 Particle Reinforced AluminumComposites 1933
S. Arakawa, T. Hatayama, K. Matsugi and O. Yanagisawa
Fabrication Process and Mechanical Property of Metal Matrix Composite withNano-size SiC Particle Produced by Vortex Method 1939
A. Kawabe and T. Kobayashi
Wear Resistance of Al-Si Alloys 1945M. Katsuta, K. Oodoshi andS. Kohara
High Temperature Tensile Properties of SiC Whisker Reinforced Al-Mg AlloyComposites 1951
H. Tezuka, Y. Okazaki, A. Kamio, B.S. Chun andS.S. Cho
The Structure and Properties of C M A Jl (Glass/Epoxy - Aluminium)Laminates 1957
J.N. Fridlyander, L.I. Anihovskaya, O.G. Senatorova, V.V. Sidelnikov,LA. Dementjeva, O.V. Startsev, A.S. KrotovandI.P. Zhegina
Alloy and Product Development, and Applications
Production of Ultra-Fine Grained Bulk Aluminum Alloys by AccumulativeRoll-Bonding (ARB) Process 1967
Y. Saito, N. Tsuji, H. Utsunomiya, T. SakaiandR-G. Hong
Development of Thermally Stabilised Aluminium-Lithium Sheet for FuselageApplications 1973
W.J. Vine, G.R. Sutton and H.J. Price
Contents xxxi
New Alloy Developments in Aluminium Brazing Sheet 1979T. J. Hurd, A. Buerger, N. Kooij, K Vieregge and A. Haszler
High Performance Material for Aerospace Applications 1985W.S. Miller, P.C.M. de Haan, A. Haszler, A. Heinz, C. KeidelandH. Ghaziary
6056 T78 : A Corrosion Resistant Copper-rich 6XXX Alloy for AerospaceApplications 1991
R. Dif, D. Bechet, T. Warner and H. Ribes
Research into the Application of Aluminum Door Beams for Automobiles 1997H. Yamashita and M. Hirano
Proposal of Novel Ultra-high Straining Process for Bulk Materials-Development of the Accumulative Roll-Bonding (ARB) Process- 2003
Y. Saito, H. Utsunomiya, N. Tsuji and T. Sakai
Development of Advanced Ship Building Materials 2009D. Sampath, S. Moldenhauer, H.R. Schipper, A.J. Schrijvers, A. Haszler,
G. Weber, K Mechsner and L. Tack
Effect of Processing Condition on Earing Behavior in Annealed Sheet of an Al-Mn-Mg Alloy 2017
H. Saitoh, T. Harada, T. Saitoh andK. Ohori
The Effect of Grainboundary Precipitations on the Stress Corrosion Crackingof Al-4~4.5mass%Mg Alloy 2023
P. Zhao, Y. Nishikawa andM. Shinohara
The Influence of Additional Elements of Aluminum Alloy on Machinability 2029S. Yoshihara andM. Hirano
Impact Lateral Compression of Thin-walled Circular Aluminum Tubes 2035T. Yokoyama and A. Soeda
Universal Structural Weldable Aluminium Alloy 1151 with ImprovedCorrosion Resistance for Operation at Elevated and Cryogenic Temperature 2041
E. F. Chirkov, I. N. Fridlyander and V. V. Cherkassov
The Effect of Rare Earth Metal Minor Addition on Structure and Propertiesof Al-Zn-Mg-Cu Alloy 2049
E.A. Tkachenko, J.N. Fridlyander, H.N. Matveyets and L.I. Kaigorodova
Properties of New Al-Li-Mg Alloy 2055J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, E. Loechelt,
P.-J. Winkler and T. Pfannenmuller
Study of the Structure and Properties of 1420 Alloy Modifications for Sheets 2059J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova,
L.V. Tarasenko and I. P. Zhegina
Development of High Formability Pre-coated Aluminum Sheet 2065O. Kato
Contents xxxiii
Volume 4
Welcome Address
Welcome Address for ICAA-6 2073S. Sato
Keynote Lecture
Aluminum Alloys for Aerospace Applications 2077E. A. Starke andAladar A.S. Csontos
Invited Lecture
Microstructural Control of Fatigue in High Strength Al-Alloys 2091/. Sinclair and P. J. Gregson
Casting and Solidification
Elimination of Alumina Particles in Molten Aluminum by ElectromagneticForce 2107
J.-H. Kim, H-J. Kim, J-P. Park andE.-P. Yoon
Phase Transformation
Influence of Sn on the Kinetics of the G.P. Zones Formation and the y 'Metastable Phase Precipitation in Al-Ag 2117
M. Kadi-Hanif and H. YousfiHomogenizing of 6063 Alloy 2123
A. Valles, P.L. Orsetti Rossi, I. Diaz andR. TostaTTP and TTT Diagrams for Ageing of 6013 Alloy 2129
V.G. Davydov, L.B. Ber, V.N. AnanievandE.Y. KaputkinNMR Study of Li-Al Alloys 2135
V. Tarasov, V. Sandier, Y. Buslaev and I. Fridlyander
Recovery, Recrystallization and Textures
The Alloys Based on Al-Fe-Mn SystemJ. Bottema, O.E. Grushko, W.S. Miller and LM. Sheveleva 2143
Fatigue, Creep and Fracture
Fracture Toughness and Impact properties of A356/Particle Metal MatrixComposites 2153
A.N. AbdEl-Azim, T.A. Khalifa and A.A. El-Akabawy
XXXIV
Rapid Solidification
Nanophase Transformation Mechanism in Rapidly Solidified Al-Fe-V-Si-NdAlloy 2163
J.X. Lin, J.N. Deng, H. Pang, B.J. Zhang andM.K. Tseng