.

Alfa Laval AQ20AlfaQTM AHRI-certified plate heat exchanger

.

ApplicationsGeneral heating and cooling duties

Standard designThe plate heat exchanger consists of a pack of corrugatedmetal plates with portholes for the passage of the two fluidsbetween which heat transfer will take place.

The plate pack is assembled between a fix frame plate and amovable pressure plate and compressed by tightening bolts.The plates are fitted with a gasket, which seals the interplatechannel and directs the fluids into alternate channels. Thenumber of plates is determined by the flow rate, physicalproperties of the fluids, pressure drop and temperatureprogram. The plate corrugations promote fluid turbulence andsupport the plates against differential pressure.

The frame plate and the pressure plate are suspended from anupper carrying bar and located by a lower guiding bar, bothof which are fixed to a support column.

Connections are located in the frame plate or, if either or bothfluids make more than a single pass within the unit, in theframe and pressure plates.

Typical capacitiesLiquid flow rateUp to 975 kg/s (15500 gpm), depending on media, permittedpressure drop and temperature program.

Plate typesAQ20M

Frame typesFM, FG and FD

Working principleChannels are formed between the plates and the corner portsare arranged so that the two media flow through alternatechannels. The heat is transferred through the plate betweenthe channels, and complete counter-current flow is createdfor highest possible efficiency. The corrugation of the platesprovides the passage between the plates, supports eachplate against the adjacent one and enhances the turbulence,resulting in efficient heat transfer. Flow principle of a plate heat exchanger

STANDARD MATERIALSFrame plateMild steel, Epoxy painted

NozzlesCarbon steelMetal lined: Stainless steel, Titanium

PlatesStainless steel Alloy 316, Alloy 254 or Titanium.

GasketsNitrile or EPDM

TECHNICAL DATAMechanical design pressure (g) / temperature

FM pvcALS™ 1.0 MPa / 150°CFG PED 1.6 MPa / 180°CFG ASME 150 psig / 350°FFD PED 2.5 MPa / 180°CFD ASME 300 psig / 350°F

CONNECTION STANDARD

Size: DN500 / NPS 20FM pvcALS™ EN 1092-1 PN10

ASMEB16.5 Class. 150FG PED EN 1092-1 PN10, EN 1092-1 PN16

ASME B16.5 CIass 150FG ASME ASME B16.5 CIass 150FD PED EN 1092-1 PN25

ASME B16.5 CIass 300FD ASME ASME B16.5 Class 150, ASME B16.5 Class 300Standard EN 1092-1 corresponds to GOST 12815-80 and GB/T9115.

Maximum heat transfer surface2880 m2 (31018 sq. ft)

Dimensions

2880 - 7080 (110 - 280”)

W

H

h28

16 (1

10.9

”)

765 (30.1”)

Measurements mm (inch)

Type H W hAQ20-FM 4095(1617/8") 1550 (61") 467(18 3/8”)AQ20-FG 3951(155 9/16") 1550 (61") 467(18 3/8”)AQ20-FD 3951(155 9/16") 1550 (61") 467(18 3/8”)The number of tightening bolts may vary depending on pressure rating.

Particulars required for quotation- Flow rates or heat load- Temperature program- Physical properties of liquids in question- Desired working pressure- Maximum permitted pressure drop- Available steam pressure

The thermal performance is third party certified throughthe AHRI Liquid to Liquid Heat Exchangers certificationprogram

.

ECF00376EN 1506 Alfa Laval reserves the right to change specifications without prior notification.

How to contact Alfa LavalUp-to-date AlfaLaval contact details forall countries are always available on ourwebsite on www.alfalaval.com

tocAlfa Laval AQ20ApplicationsStandard designTypical capacitiesLiquid flow ratePlate typesFrame typesWorking principleSTANDARD MATERIALSFrame plateNozzlesPlatesGasketsTECHNICAL DATAMechanical design pressure (g) / temperatureCONNECTION STANDARDMaximum heat transfer surfaceDimensionsMeasurements mm (inch)Particulars required for quotation.

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 150 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages false /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages false /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects true /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName (http://www.color.org) /PDFXTrapped /False

/CreateJDFFile false /SyntheticBoldness 1.000000 /Description >>> setdistillerparams> setpagedevice