Download - Aisha
POWER CONSUMPTION INTELECOMMUNICATION
NETWORKS:OVERVIEW AND REDUCTIONSTRATEGIES
January 4, 2014
GUIDED BY: PRESENTED BY:Mr.Lenin Joseph Aisha.SAsst. Professor Roll No.02Dept. of ECE M.Tech,ECESBCEW SBCEW 1 / 29
CONTENTS
• Introduction
• Why do we care about energy efficiency?
• Network Architectures
• Access Network Architecture
• Analysis of Optical and DSL technologies
• Customer Premises Equipment
• Core network architecture
• Quantification of power consumption
• Optimization of power consumption
• Conclusion
2 / 29
PREFACE
OBJECTIVES
• To give an idea about energy efficiency in communicationnetworks.
• To examine different network’s power consumption.
• To discuss power quantification and optimization methods invarious networks.
APPROACH
• Discussion on various network architectures and its powerconsumption.
• Effects of power consumption on energy efficiency.
• Quantification and optimization of power consumption.
• Conclusion
3 / 29
INTRODUCTION
• Every emerging technology is mainly evaluated on its carbonfootprint.
• Information and Communication Technology (ICT) isaccountable for 2-4 % of worldwide carbon emissions.
• One sixth of these emissions is contributed bytelecommunication networks.
Figure 1: Electricity consumption per year by various fields
4 / 29
INTRODUCTION(CONTD...)
• ICT is being regarded as a solution with the potential toeliminate about 15 % of the global carbon footprint.
• Sleep mode, component optimization and power managementare the already suggested power saving strategies.
• Different network architectures, its design parameters definingpower consumption, methods for quantification and thereduction techniques are discussed here.
5 / 29
WHY DO WE CARE ABOUT ENERGY EFFICIENCY?
• From a simple transistor to environment, thermal energy isincreasing.
• ICT alone is responsible of a percentage which vary from 2 −4% of the world power consumption.
• Pressure to reduce network power consumption while stillgrowing network capacity and functionality.
• Scalability• Power density in racks of communication equipments is
reaching practical limits.• Makes cost-efficient scaling of telecommunication networks
difficult.
6 / 29
NETWORK ARCHITECTURES
• ACCESS NETWORKS• CORE NETWORKS
• Access Networks can be again classified as:• FIXED LINE ACCESS NETWORKS• WIRELESS ACCESS NETWORKS
Figure 2: Network Overview
7 / 29
ACCESS NETWORK ARCHITECTURE
Fixed line access networks
• Users are connected through physical wires.
• 3 main types of technologies are in use :-
• DSL(Digital Subscriber Line)-Asymmetric DSL , Very high bitrate DSL
• Coax cable technology-uses Data Over Cable ServiceInterface Specification Standard.
• Optical technology-point- point , active star or PassiveOptical Network (PON).
• Cable access networks are constructed with an opticalbackhaul-HFC
• Optical access networks can be terminated with VDSLnode-FTTB ,FTTC , FTTx
8 / 29
ANALYSIS OF OPTICAL AND DSL TECHNOLOGIES
• Traffic in access network is bursty and highly variable.
• Power consumption per subscriber is considered as a metric.
ADSL
• Downstream speeds: 8 Mbps(ADSL) to 24 Mbps(ADSL2+)
• Upstream speed : 1 Mbps
• Maximum range : 1.5 km to 5.5 km
• Range allows large user aggregation-hence power consumptionis negligible
VDSL
• Uses an extended frequency spectrum compared to ADSL.
• Aggregation is closer to the user- so significant powerconsumption.
9 / 29
ANALYSIS OF OPTICAL AND DSLTECHNOLOGIES(contd...)
Optical fiber technology
• Allows both high bit rates( upto 10Gbps) and range(10-20km).
• P2P connections are used in backhaul network to aggregatelarge traffic.
• In active star and PON ,bit rate capacity is distributed overlarge number of users.
10 / 29
WIRELESS ACCESS NETWORKS
• Different technologies provides different access bit rates to theuser.
• 3 main emerging wireless technologies are:-
• WiMAX( Worldwide Interoperability for MicrowaveAccess)-IEEE802.16 std.
• HSPA (High- Speed Packet Access)-successor of UMTS
• LTE (Long Term Evolution)-4G technology
• The factor under consideration for determining power in awireless access network is the area covered by the basestations.
• The covered area is related to the input power of the basestation antenna and the bit rate.
11 / 29
CUSTOMER PREMISES EQUIPMENT
• At the customer premises, access networks will be connectedto the customer premises equipment.
• For fixed line networks it will be a home gateway.
• For wireless networks, it can be any equipment-like mobilephone,home gateway, wireless network interface card in acomputer etc.
• Hence wireless technologies are generally called as mobilestations.
12 / 29
CORE NETWORK ARCHITECTURE
• Current core networks are mix of several layers like IP-over-ATM - over- SDH.
Figure 3: Core network architecture
13 / 29
QUANTIFICATION OF POWER CONSUMPTION
FIXED LINE ACCESS NETWORKS
• Each subscriber has a dedicated connection.
• ADSL equipment consumes 1-2W/sub and VDSL consumes3-5W/sub.
• Optical network consumes 10-20W/port which can be furtherreduced if GPON is used.
• OLT-Optical Line Terminal-using for connection consumes0.2-0.8W/sub.
• VDSL DSLAM with 16 connections use only 0.01-0.05W/sub.
• Power Usage Effectiveness (PUE) - typically a factor of 2
14 / 29
QUANTIFICATION OF POWER CONSUMPTION(contd...)
WIRELESS ACCESS NETWORKS
• Highest power consumer is the base station.
• Power per subscriber is dependant on the subscriber density inthe area covered by the base station.
• For comparison a bit rate / active user is taken as 3Mbps forall technologies.
• WiMAX - Lowest- 2.9kW/BS - Range of 340 m• LTE - Highest - 3.7kW/BS - Range of 470 m• HSPA - Intermediate - 3.7kW/BS - Range of 240 m
• If subscriber density is considered as 300users/sq.km in urbanand sub urban areas:
• LTE-18W/Subs• WiMAX-27W/Subs• HSPA-68W/Subs
15 / 29
QUANTIFICATION OF POWERCONSUMPTION(contd...)
CUSTOMER PREMISES EQUIPMENT
• The home gateway consumes about 5-10 W for fixed linetechnologies.
• Home gateways for optical networks also have larger energyconsumption compared to its DSL counterparts.
• In wireless networks, the power consumption of mobile stationsis much lower since these are designed for mobile applications.
CORE NETWORKS
• 90% of power consumption is concentrated in the nodes.
• WDM links via optical amplifiers make up only 10% of powerconsumption.
16 / 29
QUANTIFICATION OF POWER CONSUMPTION(contd...)
Figure 4: Generalized core network power consumption distribution
• Layer 1 and 2-provides framing, physical connection to aspecific network(ATM. SONET , Ethernet or SDH) etc.
• Currently the power consumption in core networks is lesscompared to access networks.
17 / 29
QUANTIFICATION OF POWER CONSUMPTION(contd...)
Figure 5: Properties of different access network technologies
18 / 29
QUANTIFICATION OF POWER CONSUMPTION(contd...)
Figure 6: Power consumption/subscriber of different network technologies
19 / 29
POWER CONSUMPTION OPTIMIZATION
• SWITCHING OFF COMPONENTS
• REDUCING LOAD
• OPTIMIZING POWER CONSUMPTION OF THEREMAINING COMPONENTS
20 / 29
POWER CONSUMPTION OPTIMIZATION (contd...)
SWITCHING OFF COMPONENTS
• Switch off elements when demand is lower.
• Dynamic topology optimization -used in core networks
• Dynamic Bandwidth Allocation -used in fixed line accessnetworks.
• Hybrid hierarchical base station deployment -used inwireless access networks.
• Optimization of power in home gateway is important.
• These are individual devices that needs to be activated onlywhen the user is active.
21 / 29
POWER CONSUMPTION OPTIMIZATION (contd...)
REDUCING LOAD
• Adaptive link rate (ALR) -Used in access networks.
• Link rates are adapted on the basis of factors such as meanpacket delay and packet loss based on a handshakemechanism.
• An ethernet link with ALR can operate at a lower data ratefor over 80 percent of the time, yielding significant energysavings with only a very small increase in packet delay
• The algorithms for adaptive link rate use large packet bufferswhich require hardware that needs to be powered.
22 / 29
POWER CONSUMPTION OPTIMIZATION (contd...)
REDUCING LOAD
• A non bypass scenario: all the traffics in a node will beprocessed by the IP router
• Optical bypass - used in core networks.
• As IP routers consumes the most power,optical bypassing is apromising option to decrease power consumption.
• Optical bypasses uses the same infrastructure as the originalopaque network hence no additional capacity is added to thenetwork.
23 / 29
POWER CONSUMPTION OPTIMIZATION (contd...)
Table 1: Reduction of total PC for different traffic loads using opticalbypass - standby PC: 0.81678 MW
Network load(E) PC with 0 bypass with 10 bypasses reduction
140 1.2751 1.18696 6.91
280 1.7457 1.57327 9.88
420 2.2793 2.00099 12.21
560 2.7719 2.46233 13.17
24 / 29
POWER CONSUMPTION OPTIMIZATION (contd...)
OPTIMIZING THE POWER CONSUMPTION OFREMAINING COMPONENTS
• Increasing the ranges of base stations using MIMO - inwireless access networks.
• Optical packet switching and Optical burst switching -Used in core networks.
• A hybrid approach in which optical switches using electronicbuffering is a more feasible low-power approach for the future.
• For continent - sized core networks , increasing themaximum optical path length can reduce powerconsumption.
25 / 29
CONCLUSION
• The number of internet users is fast increasing hence thepower consumption also.
• Saving power in telecommunication networks is becoming animportant challenge.
• For reducing power; switching off components , reducing theloads on the networks and optimizing the power consumptionof the network elements can be adopted.
• In fixed line access networks power consumption optimizationis focused on the technology shift towards full opticalnetworks.
• In wireless access networks many optimizations can still beimplemented.
• In core networks the power consumption is relatively low.
26 / 29
REFERENCES
• [1].Vereecken, W.; Van Heddeghem, W.; Deruyck, M.; Puype,B.; Lannoo, B.; Joseph, W.; Colle, D.; Martens, L.;Demeester, P., ”Power consumption in telecommunicationnetworks: overview and reduction strategies,”Communications Magazine, IEEE , vol.49, no.6, pp.62-69,June 2011
• [2].S. Aleksic, Analysis of Power Consumption in FutureHigh-Capacity Network Nodes, IEEE/OSA J. Opt.Commun.and Net., vol. 1, no. 3, Aug. 2009, pp. 24558.
• [3].K. Christensen and B. Nordman, Reducing the EnergyConsumption of Networked Devices, IEEE 802.3 tutorial,2005.
• [4]. M. Gupta and S. Singh, Greening of the Internet,SIGCOMM03: Proc. 2003 Conf. Apps.,Technologies,Architectures, and Protocols for ComputerCommun.,New York, NY, USA: ACM, 2003, pp. 1926.
27 / 29
QUERIES?????
28 / 29
THANK YOU!!
29 / 29