![Page 1: After making sure your tank is clean, prepare your tank by filling it with 16 litres](https://reader035.vdocuments.us/reader035/viewer/2022062501/56816567550346895dd7f354/html5/thumbnails/1.jpg)
The pack comes in 3 parts – the microbes, the ‘activator’ liquid and a litre bottle of biostimulant.The instructions can be found on the rear of the G-UPP box.
![Page 2: After making sure your tank is clean, prepare your tank by filling it with 16 litres](https://reader035.vdocuments.us/reader035/viewer/2022062501/56816567550346895dd7f354/html5/thumbnails/2.jpg)
After making sure your tank is clean, prepareyour tank by filling it with 16 litresof water – ideally from a rain water butt or other natural source. If a rain butt is not available then tap water will be fine.
![Page 3: After making sure your tank is clean, prepare your tank by filling it with 16 litres](https://reader035.vdocuments.us/reader035/viewer/2022062501/56816567550346895dd7f354/html5/thumbnails/3.jpg)
Remove the sachet containing the microbes and fill with water to the 100ml marker.
![Page 4: After making sure your tank is clean, prepare your tank by filling it with 16 litres](https://reader035.vdocuments.us/reader035/viewer/2022062501/56816567550346895dd7f354/html5/thumbnails/4.jpg)
Add the microbes to the 100ml of water and stand for 5 minutes, giving the pack a ‘squidge’ to distribute the microbial powder well. Then, using the syringe draw up 1/3rd or approximately 30ml of microbes for each 16 L tank full of water.
![Page 5: After making sure your tank is clean, prepare your tank by filling it with 16 litres](https://reader035.vdocuments.us/reader035/viewer/2022062501/56816567550346895dd7f354/html5/thumbnails/5.jpg)
Here you see the rehydrated microbes and the activator together with the syringe ready to be put in the tank.
![Page 6: After making sure your tank is clean, prepare your tank by filling it with 16 litres](https://reader035.vdocuments.us/reader035/viewer/2022062501/56816567550346895dd7f354/html5/thumbnails/6.jpg)
Using a knapsack apply at a rate of approximately 16L of water per ¾ of an acre. Here you see a 16L tank being filled with some of the rehydrated microbes – using the syringe use approximately 1/3rd of the solution (30ml) in each tank full. You will need 3 tank fulls to cover 2.5 acres. Don’t worry – you don’t have to be exact and you can’t do any harm by accidentally over applying.
![Page 7: After making sure your tank is clean, prepare your tank by filling it with 16 litres](https://reader035.vdocuments.us/reader035/viewer/2022062501/56816567550346895dd7f354/html5/thumbnails/7.jpg)
Add approximately 100ml of theG-UPP bio-stimulant to the 16 L tank.
Finally, using the syringe, draw up approximately 15ml of the G-UPP activator and add that to the tank mixture.
![Page 8: After making sure your tank is clean, prepare your tank by filling it with 16 litres](https://reader035.vdocuments.us/reader035/viewer/2022062501/56816567550346895dd7f354/html5/thumbnails/8.jpg)
You are now ready to spray. Repeat 3 times to cover 2.5 acres.
After 1 month, refill your tank with water and apply another 100ml per 16L tank (300ml in total for 2.5 acres) of the remaining bio-stimulant.