Download - Aerospace Metric Fittings
Metric Thread5. Seat Track Fittings
32
33
Metric Thread
In some applications the commonly used fittings with imperial thread do not meet the requirements, especially in European Military Projects. For these applications allsafe JUNGFALK offers a range of seat track fittings equipped with metric threads:MJ6, MJ8, MJ10 (complying with ISO5855)
You have the choice between stud fittings or flush fittings, with or without retainer (x-stopper).Some assemblies are designed as “no-loose-parts fitting”, meaning that the retainer is integral part of the assembly and cannot get lost.
Typical applications are installation of all type of equipment for the cabin and cargo compartment as
Consoles
Ballistic Protection
Life Rafts
Stowages
Troop Seats
Auxiliary Fuel Tanks
VIP interior
5. Seat Track Fittings
Installation of no-loose-parts fitting
Installation of stud fitting with retainer
Flush fitting metric, single stud Flush fitting metric, double stud
If you do not find
the required track in the
catalogue – ask us!
34
Part No. Material Description Weight(grs)
110188-10 Fitting and Retainer CRES,zinc-plated
Single Stud Fitting
thread MJ6x1 (blind hole), self-locking (re-usable),no loose parts (retainer integrated in assy)
Min. loads: *16 kN in x / y / z,
(applied individually)
27
110189- Body and Retainer CRES
finish: see table
Double Stud Fitting
thread MJ8x1 (blind hole), self-locking (re-usable)
Min. loads: *Fx 27,00 kN Fy 16,00 kN Fz 35,00 kN
(applied individually)
A Dash No.
9,0 -32 zinc-plated thread-lock, no-loose-parts 47
7,5 -33 zinc-plated thread-lock, no-loose-parts 41
9,0 -50 zinc-plated thread-lock 47
7,5 -51 zinc-plated thread-lock 41
110189- Body and Retainer CRES
finish: see table
Double Stud Fitting
thread MJ8x1 (blind hole)
Min. loads: *Fx 27,00 kN Fy 16,00 kN Fz 35,00 kN
(applied individually)
A Dash No.
9,0 -132 zinc-plated no-loose-parts 47
7,5 -133 zinc-plated no-loose-parts 41
9,0 -150 zinc-plated 47
7,5 -151 zinc-plated 41
110188
110189
110189
* when installed in heavy duty track according to AS33601 with appropriate fasteners
Fittings, Metric Thread5. Seat Track Fittings
THREAD MJ 6 X 1SELF-LOCKING
2419.4
20
35
Part No. Material Description Weight(grs)
120233-10120233-11
CRES,passivated
Flush Fitting,single stud
thread:-10 MJ6x1-11 MJ8x1
Ultimate load: *Fz 17,78 kN / 4000lbs
11
110185-10 Steel forging 4140,heat-treated andzinc-plated
Flush Fitting,double stud
thread MJ6x1
Ultimate load: *Fx and Fy 10,00 kN / 2250 lbs,Fz 20,00 kN / 4500 lbs
22
110185-11 Steel forging 4140,heat-treated andzinc-plated
Flush Fitting,double stud
thread MJ8x1
Ultimate load: *Fx and Fy 20,00 kN / 4500 lbs,Fz 30,00 kN / 6750 lbs
22
120615-40 Steel forging 4140,heat-treated andzinc-plated
Flush Fitting,double stud
2 threads MJ6x1
Ultimate load: *Fz 17,78 kN / 4000lbsper thread hole
20
120220-10120220-11
Steel forging 4140,heat-treated andzinc-plated
Flush Fitting,double stud
2 countersunk holes:-10 for MJ4-11 for MJ5
21
120236-10 CRES,passivated
Flush Fitting,double stud
2 threads MJ5x0,8
27
120233
110185
110185
120615
120220
120236
* when installed in heavy duty track according to AS33601 with appropriate fasteners
Flush Fittings, Metric Thread5. Seat Track Fittings
Fz
THREAD THRU
25.4
THREAD THRUMJ 6 X 1
5.9
Fz
Fx
TRACK LEVEL
25.4
THREAD THRUMJ 8 X 1
5.9
Fz
Fx
TRACK LEVEL
25.4
THREAD THRUMJ 6 X 1
Fz TRACK LEVEL
Fz TRACK LEVEL
25.4
THREAD THRUMJ 5 X 0,8
Fz TRACK LEVEL
38.1
36
120107
120108
120160
110066
EN3536
Part No. Material Description Weight(grs)
120107-10120107-11
CRES,passivated,crack-tested
Single Stud
Thread-10: MJ8x1,25-11: MJ8x1
17
120108-10 CRES,passivated,crack tested
Single Stud
ThreadMJ10x1,25
22
120160- Stud steel forging,heat-treated and zinc-plated
Double Stud Fitting,metric threadMJ10x1,25
Min. Ultimate load with Retainer (P/N 120161-10): *Fx/y/z 29,50 kN / 6640 lbs(load point top of retainer)
A B Dash No.
23,0 14,0 -10 37
29,0 13,0 -11 40
29,0 27,0 -12 40
49,0 18,0 -13 53
36,0 14,0 -14 45
110066- Stud steel forging,heat treated and zinc plated,retainer alloy steel, zinc plated
Double Stud Fitting assy with Retainer, metric threadMJ10x1,25
Min. Ultimate load with Retainer (P/N 120161-10): *Fx/y/z 29,50 kN / 6640 lbs(load point top of retainer)
A B Dash No.
23,0 14,0 -10 50
29,0 13,0 -11 53
29,0 27,0 -12 53
49,0 18,0 -13 66
36,0 14,0 -14 58
EN3536-100 Nut Hexagon,self-locking,to be used with thread MJ10x1,25
6
* when installed in heavy duty track according to AS33601 with appropriate fasteners
Panel and Stanchion Fittings, Metric Thread5. Seat Track Fittings
27,5
THREAD
29,3
16
MJ10 X 1.25
MJ 10 X 1,25
A B
Fz
Fx
3,81
25 ,4