Aeroelasticità e Acustica nelle Strutture Aerospaziali
appunti e spunti per discipline affascinanti
Torino, 2013
Sergio De Rosa �
PASTA-Lab Laboratory for Promoting experiences
in Aeronautical STructures and Acoustics Dipartimento di Ingegneria Industriale
Sezione Aerospaziale
Università degli Studi di Napoli "Federico II" Via Claudio 21, 80125 Napoli, Italia
Indice 1) Inquadramento Generale (Interazione Fluido-
Struttura). 2) Onde, Guide d’onda e Modi Propri di un Sistema
Lineare. 3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo:
risposta di pannelli sotto l’azione dello strato limite turbolento
18) Rappresentazioni Universali dei Dati Aero-Acusto-Elastici.
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
84 R. Lohner et al.
Aero/HydroelasticityAdvanced
Aero/HydroelasticityClassic
BiomedicalApplications
ConjugateHeatTransfer
RigidWalls
CTD
Ridid Body(6 DOF)
ModalAnalysis
LinearFEM
Non!LinearFEM
Rupture/Tearing
No Fluid
AcousticsPotential/
PotentialFull
Euler
RANS
LES
DNS
CFD
PrescribedFlux/Temperature
Network Models
Linear FEM
Nonlinear FEM
CSD
Interaction
Thermal StressFatigue
Shock!Structure
Fig. 2. CFD/CSD/CTD Space
RigidWalls
CTD
Ridid Body(6 DOF)
ModalAnalysis
LinearFEM
Non!LinearFEM
Rupture/Tearing
No Fluid
AcousticsPotential/
PotentialFull
Euler
RANS
LES
DNS
CFD
PrescribedFlux/Temperature
Network Models
Linear FEM
Nonlinear FEM
CSD
Blast!Structure
Extrusion
Flutter
Galloping
High Performance Engines
Weapon Fragmentation
Material Forming
High Mach Nr. Vehicles
AerodynamicsNoise
Flutter
Arterial FlowsTentsParachutesAirbags
Chip CoolingEngine Cooling
Underhood Flows
Buzz Whipping
Fig. 3. CFD/CSD/CTD Application Areas
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
1
La risposta di un oscillatore semplice e di untubo
Si vuole analizzare l’interazione fluido-struttura tra un pistone e un tubo,valutando la variazione delle frequenze proprie del pistone per e�etto dellapresenza di un fluido all’interno del tubo. Si analizzano prima il pistone e iltubo presi singolarmente, dopodiche si analizza il sistema accoppiato.
1.1 Equazioni omogenee del sistema acustoelastico
Scriviamo le equazioni omogenee del piu semplice sistema acustoelastico,rappresentato in Figura 1.1: un oscillatore meccanico accoppiato ad un tubodi lunghezza L.
Figura 1.1: sistema acustoelastico costituito da un oscillatore meccanicoaccoppiato con tubo di lunghezza L.
L’oscillatore e rappresentato da una massa e una rigidezza concentrati,indicati rispettivamente dai simboli m e k, mentre nel tubo, allineato secondoun asse di riferimento x, e presente un fluido di velocita caratteristica c e didensita ⌦ 1.
1 Si potrebbe schematizzare anche il fluido con proprieta concentrate, perdendopero la componente spaziale che si vuole analizzare in questa trattazione.
4 1 La risposta di un oscillatore semplice e di un tubo
L’incognita meccanica e lo spostamento x del pistone mentre l’incognitaacustica e la pressione p(x, t), dove il simbolo t denota la variabile temporale.
Si osservi che stiamo analizzando un sistema strutturale a proprieta con-centrate (pistone) che interagisce con un sistema acustico a proprieta dis-tribuite (tubo) attraverso un’area A (sezione del tubo e del pistone). Il sistemadi equazioni che descrive il comportamento del sistema e
�✏
�
mx(t) + kx(t) = p(x, t)A
⌃2p(x,t)⌃x2 = 1
c2⌃2p(x,t)
⌃t2
(1.1)
Nella prima equazione del sistema (3.3) e possibile identificare l’e�ettodel fluido sulla struttura, ovvero la forza agente sul pistone generata dallapressione del fluido sulla sezione A. L’e�etto reciproco, ovvero quello dellastruttura sul fluido, si vede nella condizione al contorno del tubo alla sezionex = 0
1
⌦
dp
dx
⇤⇤⇤x=0
= �x(t). (1.2)
La (1.2) relaziona il gradiente di pressione con l’accelerazione del pistone allasezione x = 0: se il pistone accelera verso destra (x(t) > 0), a x = 0 il fluidoespande ( dpdx |x=0 < 0).
Sull’altra estremita del condotto (x = L), supponiamo che il tubo e chiuso,e quindi la seconda condizione al contorno e
dp
dx
⇤⇤⇤x=L
= 0. (1.3)
Prima di analizzare il sistema acustoelastico completo, si analizzano primail pistone ed il tubo singolarmente. In tal modo, e possibile evidenziare glie�etti che l’accoppiamento comporta sulle frequenze proprie dei due sistemi.
1.2 L’operatore strutturale: il pistone
1.2.1 Analisi modale
E opportuno richiamare brevemente i concetti base dell’oscillatore armon-ico, non soggetto ad alcuna forzante, mediante l’analisi modale.
Analisi modale reale
Nel caso di oscillatore non smorzato, l’equazione del sistema (in assenzadi forzante) e
mx(t) + kx(t) = 0. (1.4)
Scegliendo soluzioni armoniche del tipo
1.2 L’operatore strutturale: il pistone 5
x(t) = Xej⌅t (1.5)
e possibile esplicitare l’equazione secolare
�↵2mXj⌅t + kXj⌅t = 0 � �↵2m+ k = 0. (1.6)
Dalla (1.6) e possibile ricavare la pulsazione naturale dell’oscillatore ad ungrado di liberta
↵0 =
k
m(1.7)
e quindi la frequenza propria dell’oscillatore
f0 =1
2
k
m. (1.8)
Analisi modale complessa: oscillatore con smorzamento viscoso
Se e presente uno smorzamento viscoso (vedi Capitolo 4), l’equazioneomogenea associata diventa
mx(t) + bx+ kx(t) = 0 (1.9)
dove b e il coe⌅ciente di smorzamento viscoso. In questo caso, mediante lascelta di soluzioni armoniche complesse (p numero complesso)
x(t) = Xept (1.10)
l’equazione secolare diventa
mp2 + bp+ k = 0 � p =�b±
�b2 � 4km
2m. (1.11)
Si definisce per comodita uno smorzamento critico bcr, che permette di dis-criminare le varie possibilita di moto. Esso e funzione dei parametri strutturali,al pari della pulsazione naturale.
bcr = 2�km (1.12)
⌃ =b
bcr=
b
2�km
(1.13)
Dalla (1.13) e possibile ricavare
b
m= 2⌃↵0 (1.14)
e pertanto si riscrive la (1.11) come
6 1 La risposta di un oscillatore semplice e di un tubo
p1,2 = ↵0
⌘�⌃ ±
◆⌃2 � 1
✓. (1.15)
La soluzione della (1.9) e quindi del tipo
x(t) = X1ep1t +X2e
p2t. (1.16)
Al variare del valore di ⌃, e possibile classificare le soluzioni del sistema comeriportato in Tabella 1.1.
Tabella 1.1: classificazione delle soluzioni.
Regime (⇥) Tipologia delle radici Prima radice Seconda radice
subcritico complesse coniugate ⇤0
⇧�⇥ + j
⌥1� ⇥2
⌃⇤0
⇧�⇥ � j
⌥1� ⇥2
⌃
(⇥ < 1)
critico reali coincidenti ⇤0[�⇥] ⇤0[�⇥](⇥ = 1)
supercritico reali distinte ⇤0
⇧�⇥ +
⌥⇥2 � 1
⌃⇤0
⇧�⇥ �
⌥⇥2 � 1
⌃
(⇥ > 1)
Ovviamente, le diverse tipologie di radici al variare di ⌃ comportano lavariazione del tipo di moto dell’oscillatore, come riportato in Tabella 1.2.
Tabella 1.2: risposta strutturale al variare di ⌃.
Tipo di moto (⇥) Forma risolutiva
Periodico smorzato x(t) = e(�⇤0�t)⇧X1e
(j⇤0t⇥
1��2) +X2e(�j⇤0t
⇥1��2)
⌃=
(⇥ < 1) Y1e(�⇤0�t)
⇧cos
�j⇤0t
⌥1� ⇥2
⇥+ ⌅
⌃
aperiodico x(t) = Xe(�⇤0t)
(⇥ = 1)
aperiodico x(t) = e(�⇤0�t)⇧X1e
(⇤0t⇥
�2�1) +X2e(�⇤0t
⇥�2�1)
⌃=
(⇥ > 1) e(�⇤0�t)⇧X1 cosh
⇤⇤0t
⌥⇥2 � 1
⌅+X2 sinh
⇤�⇤0t
⌥⇥2 � 1
⌅⌃
In Figura 1.2 sono rappresentati due esempi di risposta temporale di unoscillatore con smorzamento viscoso: nel caso subcritico (⌃ < 1) il sistemaoscilla per un certo tempo prima di fermarsi; nel caso supercritico (⌃ > 1) ilsistema non oscilla, ma torna in un tempo breve nelle condizioni di equilibrio.
1.2 L’operatore strutturale: il pistone 7
(a) Caso subcritico, ⇥ < 1. (b) Caso supercritico, ⇥ > 1.
Figura 1.2: esempi di risposta temporale di un oscillatore con smorzamentoviscoso.
Analisi modale complessa: oscillatore con smorzamento strutturale
L’altro modello di smorzamento piu comune e quello cosiddetto strutturale(vedi Capitolo ??), in cui si considera lo smorzamento proporzionale allarigidezza della struttura secondo un coe⌅ciente immaginario j⌥. In questocaso, l’equazione omogenea associata dell’oscillatore e
mx(t) + k[1 + j⌥]x(t) = 0. (1.17)
Scegliendo ancora soluzioni armoniche complesse del tipo
x(t) = Xept (1.18)
l’equazione secolare diventa
mp2 + [1 + j⌥]k = 0 (1.19)
da cui si ricava
p2 =k
m[1 + j⌥] � p2 = ↵2
0 [1 + j⌥]. (1.20)
1.2.2 Risposta strutturale dell’oscillatore con forzante periodica
L’analisi della risposta strutturale serve per inquadrare un possibile pas-saggio da un modello all’altro di smorzamento.
Oscillatore non smorzato
L’equazione del sistema e
mx(t) + kx(t) = f(t). (1.21)
Scegliendo soluzioni armoniche del tipo (1.5) e una forzante armonica
f(t) = Fej⌅t (1.22)
8 1 La risposta di un oscillatore semplice e di un tubo
l’equazione (1.21) diventa
(�m↵2 + k)X = F (1.23)
e quindi la risposta strutturale e
X =F
m
1
(�↵2 + ↵20)
� x(t) =Fm
(�↵2 + ↵20)ej⌅t. (1.24)
La funzione di trasferimento e
H(↵) =1
(�↵2 + ↵20). (1.25)
Oscillatore in presenza di smorzamento viscoso
Ripetendo i passaggi svolti nel caso di oscillatore non smorzato, e possibilescrivere anche la risposta strutturale del sistema in presenza di smorzamentoviscoso
x(t) =Fm
(�↵2 + ↵20) + 2j⌃↵0↵
ej⌅t. (1.26)
E interessante riportare la funzione di trasferimento per analizzare dove losmorzamento influenza la risposta dell’oscillatore. Essa e data dalla
H(↵) =Fm
(�↵2 + ↵20) + 2j⌃↵0↵
(1.27)
In Figura 1.3 e riportato l’andamento della funzione di trasferimento per unoscillatore avente una pulsazione propria ↵0 = 55rad/sec per tre valori di ⌃.
Figura 1.3: funzione di trasferimento di un oscillatore con smorzamento viscoso(↵0 = 55rad/sec) per diversi valori di ⌃.
1.2 L’operatore strutturale: il pistone 9
Dall’esame della Figura 1.3, si evince che lo smorzamento e importantesolo in un intorno della frequenza risonanza. La larghezza di questo intorno,denominata �f , aumenta all’aumentare del livello di smorzamento.
Si analizzano ora le singole componenti della funzione di trasferimento inpresenza di smorzamento viscoso, per un valore fissato di ⌃. In Figura 1.4 sonorappresentate:
• h(↵, 0.02), ovvero la funzione di trasferimento completa dell’oscillatore con⌃ = 0.02;
• hK(↵, 0.02) = 1⌅2
0, ovvero la componente della funzione di trasferimento
dovuta alla rigidezza;• hM (↵, 0.02) = 1
⌅2 , ovvero la componente della funzione di trasferimentodovuta alla massa;
• hD(↵, 0.02) = 12j�⌅0⌅
, ovvero la componente della funzione di trasferimen-to dovuta allo smorzamento.
Figura 1.4: componenti della funzione di trasferimento per smorzamentoviscoso ⌃ = 0.02.
Dalla Figura 1.4 e possibile osservare che:
• per basse frequenze (↵ ⌃ ↵0), la risposta e controllata dalla rigidezza;• per alte frequenza (↵ ⌥ ↵0), e la massa a determinare il livello della
risposta;• in prossimita della frequenza di risonanza (↵ = ↵0), l’elemento determi-
nante e il livello di smorzamento.
Oscillatore in presenza di smorzamento strutturale
Nel caso di smorzamento strutturale, la risposta strutturale dell’oscillatoree
10 1 La risposta di un oscillatore semplice e di un tubo
x(t) =Fm
(�↵2 + ↵20) + j⌥↵2
0
ej⌅t (1.28)
e la funzione di trasferimento e
x(t) =1
(�↵2 + ↵20) + j⌥↵2
0
. (1.29)
Valgono le stesse osservazioni fatte nel caso di smorzamento viscoso, ovverolo smorzamento influisce solo in prossimita della frequenza di risonanza.
1.2.3 Forza dissipative
Nel caso di smorzamento viscoso, la componente dissipativa delle forze dirichiamo e data da
FDV (t) = bx(t) = j↵bx(t) = 2jm⌃↵↵0x(t) (1.30)
mentre nel caso di smorzamento strutturale e
FDS(t) = j⌥kx(t) = j⌥↵20mx(t). (1.31)
E evidente che la forza dissipativa dovuta all’adozione di uno smorzamentostrutturale non dipende dalla frequenza, mentre l’adozione del modello viscosoe connessa ad una funzionalita lineare con la frequenza di eccitazione.
E interessante confrontare le due forze forze dissipative, al fine di trovareun legame che permetta il passaggio da un modello di smorzamento all’altro.Rapportando membro a membro le (1.31) e (1.30), risulta
FDS(t)
FDV (t)=
⌥↵20
2⌃↵↵0=
⌥
2⌃ ⌅⌅0
. (1.32)
Quando le due componenti dissipative si eguagliano, si ottiene la relazione perpassare da un modello di smorzamento all’altro (ovvero da ⌃ a ⌥ e viceversa):
1 =⌥
2⌃ ⌅⌅0
� ⌃ = ⌥↵0
2↵. (1.33)
In condizioni di risonanza (↵0 = ↵), risulta
⌃ =⌥
2. (1.34)
1.3 L’operatore acustico: il tubo
Il tubo e un sistema monodimensionale in cui viaggiano onde longitudinalicon una velocita c che dipende dal mezzo (per l’aria, c e la velocita del suono).L’equazione di partenza per l’analisi del problema e l’equazione delle onde
1.3 L’operatore acustico: il tubo 11
Figura 1.5: analisi del rapporto delle forze dissipative in funzione dellafrequenza.
�2p(x, t) =1
c2⌘2p(x, t)
⌘t2(1.35)
dove:
• c e la velocita caratteristica di propagazione dell’onda longitudinale;• �2 e l’operatore di Laplace;• t e la variabile temporale;• x e la variabile spaziale;• p(x, t) e la grandezza perturbata dal passaggio dell’onda, ovvero e una
variazione di pressione.
Poiche il sistema considerato e monodimensionale, la (1.35) si puo scriverecome
⌘2p(x, t)
⌘x2=
1
c2⌘2p(x, t)
⌘t2. (1.36)
Ipotizzando che il sistema tubo sia conservativo, e possibile disaccoppiarela dipendenza spaziale da quella temporale, ovvero
p(x, t) = P (x)T (t). (1.37)
Mediante la (1.37), e possibile semplificare la (1.36) in
P ⇥⇥(x)T (t) =1
c2P (x)T ⇥⇥(t) � P ⇥⇥(x)
P (x)=
1
c2T ⇥⇥(t)
T (t)(1.38)
A⌅nche sia verificata l’eguaglianza (1.38), i due rapporti devono esserecostanti, per cui
T ⇥⇥(t)
T (t)= ↵2 (1.39)
12 1 La risposta di un oscillatore semplice e di un tubo
P ⇥⇥(x)
P (x)=
↵2
c2. (1.40)
Avendo supposto il sistema conservativo, e su⌅ciente analizzare solo lavariazione spaziale della pressione. La soluzione della (1.40) e del tipo
P (x) = P1 sin�↵cx⇥+P2 cos
�↵cx⇥= P1 sin(kx)+P2 cos(kx) = P1e
�jkx+P2ejkx
(1.41)dove k = ⌅
c e il numero d’onda. Le costanti P1 e P2 sono determinate dallecondizioni al contorno. In particolare, le condizioni al contorno possono essere:
• P (0) = P0, ovvero tubo aperto in x = 0;
• dPdx
⇤⇤⇤x=0
= Q0, ovvero tubo chiuso in x = 0;
• P (L) = PL, ovvero tubo aperto in x = L;
• dPdx
⇤⇤⇤x=0
= QL, ovvero tubo chiuso in x = L.
Analizziamo tre tra le quattro possibili combinazioni.
1.3.1 Caso 1: tubo chiuso-chiuso
In questo caso, le condizioni al contorno sono:
dP
dx
⇤⇤⇤x=0
= 0 (1.42)
dP
dx
⇤⇤⇤x=L
= 0 (1.43)
P ⇥(x) = kP1 cos(kx)� kP2 sin(kx) (1.44)
P ⇥(0) = kP1 cos(k0)� kP2 sin(k0) = 0 (1.45)
P ⇥(L) = kP1 cos(kL)� kP2 sin(kL) = 0 (1.46)
Dalla (1.45) si ricava che P1 = 0. Dalla (1.46), e possibile ricavare gliautovalori k.
kP2sin(kL) = 0� kL = i (1.47)
ki =i
L (1.48)
con i {0, 1, 2, . . . N}. Dalla (1.48) si calcolano le frequenze naturali delsistema tubo chiuso-chiuso
↵i =ic
L (1.49)
fi =ic
2L(1.50)
con i {0, 1, 2, . . . N}. La variazione di pressione e pertanto possibile scriverlacome
1.3 L’operatore acustico: il tubo 13
P (x) =⇣
i=0
P2,i cos(kix). (1.51)
E interessante calcolare il passo in frequenza (distanza modale) ⇧f , ovverola distanza tra un modo e quello successivo.
⇧f = fi+1 � fi =(i+ 1)� (i)
2Lc =
c
2L(1.52)
L’inverso della distanza modale e la densita modale
n =2L
c(1.53)
mediante la quale e possibile calcolare in modo statistico quanti modi risuo-nano in un dato intervallo in frequenza �f .
N = �f ·n = �f2L
c(1.54)
E evidente che, a parita di �f , il numero di modi risonanti aumenta con lalunghezza del dominio e diminuisce con l’inverso della velocita caratteristica.Ad esempio, nell’intervallo (0; 10000)Hz, un dominio monodimensionale disezione costante e lunghezza pari a L = 1m presenta all’incirca:
• 60 modi, se pieno d’aria (c ⇧ 340m/sec);• 20 modi, se pieno d’acqua (c ⇧ 1000m/sec);• 4 modi, se d’alluminio o d’acciaio (c ⇧ 5000m/sec).
1.3.2 Caso 2: tubo aperto-aperto
In questo caso, le condizioni al contorno sono:
P (0) = 0 (1.55)
P (L) = 0 (1.56)
QuindiP (0) = P1 sin(k0) + P2 cos(k0) (1.57)
P (L) = P1 sin(kL) + P2 cos(kL) = 0 (1.58)
Dalla (1.57) si ricava che P2 = 0 e pertanto si ritrovano le condizioni (1.48),(1.49), (1.50), (1.66) del paragrafo precedente, con la sola esclusione del casoi = 0 (soluzione rigida):
P (x) =⇣
i=1
P1,i sin(kix). (1.59)
14 1 La risposta di un oscillatore semplice e di un tubo
1.3.3 Caso 3: tubo aperto-chiuso
In questo caso, le condizioni al contorno sono le (1.55) e (1.43), per cui
P (0) = P1 sin(k0) + P2 cos(k0) = 0 (1.60)
P ⇥(L) = kP1 cos(kL)� kP2 sin(kL) = 0 (1.61)
Dalla (1.60) si ricava che P2 = 0. Dalla (1.61), e possibile ricavare gliautovalori k
cos(kL) = 0� kL =
2+ i (1.62)
con i {0, 1, 2, . . . N}. Noti i numeri d’onda, e possibile calcolare le frequenzeproprie del tubo aperto-chiuso
↵i = c
L
�12+ i
⇥(1.63)
fi =c
2L
�12+ i
⇥(1.64)
con i {0, 1, 2, . . . N}. La risposta del sistema e pertanto ancora esprimibilecome
P (x) =⇣
i=0
P1,i sin(kix). (1.65)
Dal confronto degli autovalori e delle frequenze proprie del tubo aperto-chiuso con quelli del tubo aperto-aperto e chiuso-chiuso, risulta che essi sonodi�erenti. Calcolando la distanza modale tra due modi successivi anche peril sistema tubo aperto-chiuso, risulta che esso resta invariato rispetto ai casiprecedentemente analizzati.
⇧f = fi+1 � fi =c
2L
�12+ i+ 1
⇥� c
2L
�12+ i
⇥=
c
2L(1.66)
Pertanto, pur cambiando le frequenze naturali, la densita modale restaimmutata.
1.3.4 Spazio dei numeri d’onda e riepilogo delle frequenze naturali
In tutti i casi esaminati, lo spazio dei numeri d’onda puo essere rapp-resentato come una retta in cui i modi sono equispaziati, con un intervallo�k = ⇥
2L . Riepilogando le frequenze naturali per i casi analizzati:
• tubo chiuso-chiuso fi =ic2L , con i {0, 1, 2, . . . N};
• tubo aperto-aperto fi =ic2L , con i {1, 2, . . . N};
• tubo aperto-chiuso fi =c2L
⌅12 + i
⇧, con i {0, 1, 2, . . . N}.
In tutti i casi analizzati, sono costanti sia l’intervallo nello spazio dei numerid’onda �k = ⇥
2L che il passo in frequenza ⇧f = c2L .
1.4 Operatore acustoelastico 15
1.4 Operatore acustoelastico
Una volta analizzati singolarmente l’operatore strutturale e quello acusti-co, e possibile esaminare l’operatore accoppiato acustoelastico. Date la (3.3)e le condizioni al contorno (1.2) e (1.3), assumiamo soluzioni armoniche deltipo
x(t) = Xej⌅t (1.67)
p(t) = P (x)ej⌅t (1.68)
Conseguentemente
P (x) = P1 sin(kx) + P2 cos(kx) (1.69)
P ⇥(x) = kP1 cos(kx)� kP2 sin(kx) (1.70)
Dalla prima equazione del sistema accoppiato (3.3) si ricava che
X =A
m
P (0)
�↵2 + ↵20
. (1.71)
Dalle condizioni al contorno imposte sul tubo
�kP1 cos(k0)� kP2 sin(k0) = � ⇤⌅2P (0)
�⌅2+⌅20
Am
kP1 cos(kL)� kP2 sin(kL) = 0(1.72)
�kP1 +
⇤⌅2P2
�⌅2+⌅20
Am = 0
kP1 cos(kL)� kP2 sin(kL) = 0(1.73)
In conclusione, si ottiene il seguente sistema risolvente
⌦k ⇤⌅2P2
�⌅2+⌅20
Am
cos(kL) � sin(kL)
↵�P1
P2
=
�00
. (1.74)
Scartando la soluzione banale (P1 = P2 = 0), scriviamo l’equazione secolare
�k sin(kL)� cos(kL)⌦↵2
�↵2 + ↵20
A
m= 0 � tan
�↵L
c
⇥=
⌦↵c
↵2 � ↵20
A
m. (1.75)
Poiche la (1.75) e un’equazione trascendente, non esiste la soluzione informa chiusa e pertanto bisogna studiarla graficamente. Denominando:
• ⌅(↵) = tan�↵L
c
⇥il membro dipendente dall’operatore acustico;
• q(↵) = ⇤⌅c⌅2�⌅2
0
Am il membro dipendente dall’operatore strutturale;
16 1 La risposta di un oscillatore semplice e di un tubo
Figura 1.6: studio grafico dell’equazione trascendente per il calcolo degliautovalori del sistema acustoelastico.
in Figura 1.6 e riportato un andamento qualitativo di una generica risoluzionegrafica. Gli autovalori del sistema acustoelastico sono dati dall’intersezionedelle curve ⌅(↵) e q(↵).
La Tabella 1.3 riporta una semplice analisi parametrica del problema, incui la parte acustica e inalterata, mentre l’operatore strutturale viene op-portunamente variato. Cio allo scopo di parametrare le frequenze naturaliaccoppiate in funzione di
⇥ =↵20m
⌦c2L. (1.76)
Dalla tabella, si osserva chiaramente come i soli modi (e frequenze) interessatiall’accoppiamento sono sempre il modo (unico) strutturale ed uno dei modiacustici; in particolare, si genera uno split della prima frequenza acustica,mentre le altre frequenze restano praticamente inalterate. Cio e legato al fattoche l’accoppiamento qui presentato e solo dinamico, e non e presente alcunacomponente geometrica: quest’ultima entra in gioco quando anche l’operatorestrutturale e decomposto secondo frequenze proprie e modi che si dispieganonello spazio. Invece, nell’ambito della trattazione, si e considerato il pistonerigido e pertanto parliamo solo di accoppiamento dinamico.
1.5 Valutazione dell’accoppiamento
Un primo modo per valutare l’e�etto dell’accoppiamento in modo ingeg-neristico e basato sull’utilizzo di un paramentro statico, detto ⇤, che non tieneconto delle frequenze naturali disaccoppiate. Esso e cosı definito
1.5 Valutazione dell’accoppiamento 17
Tabella 1.3: e�etto dell’accoppiamento sulle frequenze naturali acustiche infunzione del parametro ⇥.
� =⇤20m
⇥c2L
Frequenze proprie [Hz]Disaccoppiate Accoppiate
Strutturali Acustiche
� = 0.045 13.7
0.0 0.0
13618.7137.3
272 272.6408 408.4544 544.3680 680.3816 816.2
� = 4.588 137.6
0.0 0.0
136127.6146.3
272 272.9408 408.5544 544.3680 680.3816 816.2
� = 13.95 240.0
0.0 0.0
136135.4238.0
272 274.7408 408.7544 544.4680 680.3816 816.2
⇤ =⌦Ac2A⌦Sc2S
(1.77)
dove i pedici A e S sono relativi rispettivamente alla parte acustica e a quellastrutturale e c e ⌦ sono rispettivamente la velocita caratteristica e la densitadell’operatore a cui si riferiscono.
Per ⇤ ⌃ 1, l’e�etto del fluido sulla struttura puo essere trascurato.Nel caso analizzato in questo capitolo, abbiamo un sistema strutturale a
proprieta concentrate ed e facile dimostrare che ⇥ e leggibile come un ⇤�1.L’introduzione del parametro ⇤ permette anche il confronto tra gli e�etti
di due fluidi di�erenti, per fissati parametri strutturali. Ad esempio, andiamoa confrontare aria (⇤ar) e acqua(⇤ac):
⇤ar =⌅ ⌦Sc2S⌦arc2ar
⇧�1(1.78)
18 1 La risposta di un oscillatore semplice e di un tubo
⇤ac =⌅ ⌦Sc2S⌦acc2ac
⇧�1(1.79)
Risulta evidente che l’accoppiamento e sempre piu importante all’au-mentare della densita di massa corrispondente. Rapportando membro a mem-bro la (1.79) e la (1.78)
⇤ac
⇤ar=
⌦Sc2S⌦arc2ar
⌅ ⌦Sc2S⌦acc2ac
⇧�1=
⌦acc2ac⌦arc2ar
. (1.80)
Considerando i valori tipici di aria e acqua (cac ⇧ 3car e ⌦ac ⇧ 1000⌦ar),si ha
⇤ac
⇤ar⇧ O(104) (1.81)
da cui si deduce che l’accoppiamento tra una data struttura ed un gas equattro ordini di grandezza minore del corrispondente tra la stessa strutturaed un liquido, come era lecito e naturale aspettarsi.
1.6 Ancora sull’analisi modale accoppiata
Consideriamo ancora il sistema 3.3, le condizioni al contorno (1.2) e (1.3)e le soluzioni armoniche (1.67) e (1.68).
Nello spazio, consideriamo ora due onde armoniche, una retrocedente el’altra antecedente, in senso complessivo (senza cioe considerare la sola partereale o quella immaginaria):
P (x) = P1ej⌅x + P2e
�j⌅x (1.82)
P ⇥(x) = jkP1e⌅x � jkP2e
⌅x. (1.83)
Essendo sempre valida la (1.71), dalle condizioni al contorno del tubo epossibile scrivere
�jkP1 � jkP2 = � ⇤⌅2
�⌅2+⌅20
Am (P1 + P2)
P1ejkL � P2e�jkL = 0(1.84)
Introducendo la variabile
� =⌦↵2
�↵2 + ↵20
A
m(1.85)
si ottiene il seguente sistema risolvente⌃jk + � �jk + �ejkL �e�jkL
⌥�P1
P2
=
�00
(1.86)
Scartando ovviamente la soluzione banale (P1 = P2 = 0), scriviamo l’e-quazione secolare.
1.6 Ancora sull’analisi modale accoppiata 19
e�jkL(� + jk) + ejkL(� � jk) = 0 �(� + jk) cos(kL)� (� + jk)j sin(kL) + (� � jk) cos(kL) + (� � jk)j sin(kL) = 0
(1.87)A questo punto, e necessario annullare contemporaneamente e separatamentela parte reale e quella immaginaria:
�� cos(kL) + k sin(kL) + � cos(kL) + k sin(kL) = 0jk cos(kL)� j� sin(kL)� jk cos(kL) + j� sin(kL) = 0
�
�2� cos(kL) + 2k sin(kL) = 00 = 0
(1.88)
Dal sistema (1.88) si ricava che
tan(kL) =�
k� tan(kL) =
⌦c↵
�↵2 + ↵20
A
m(1.89)
ritrovando, come era lecito aspettarsi, il risultato espresso dalla (1.75).
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
Introduzione all’Aeroelasticità
Sergio De Rosa
Dipartimento di Ingegneria Industriale Sezione Aerospaziale
Università degli Studi di Napoli �Federico II�
2
Una Prima Definizione
• L�Aeroelasticità è la disciplina che tratta lo studio degli effetti delle forze aerodinamiche sulle strutture elastiche.
• Applicata ? Se ascolto dimentico, se vedo ricordo, se faccio capisco.
3
Risposta a Ciclo Aperto (Open Loop)
Spostamento(Output)
Struttura(Sistema)
Carico(Input)
Nei sistemi a ciclo aperto lineari, non c�è possibilità di indeterminazione: una volta assegnato il sistema, ed il suo ingresso sia una quantità nota, l�uscita è univocamente determinata.
{ } [ ]{ }
[ ]{ } [ ]{ } [ ]{ } { }
Esempi:Risposta Statica
Risposta AeroelasticaF K x
M q K q A q q FD
=
+ = +∗ ( )
4
Risposta a Ciclo Chiuso (Closed Loop)
Carichi Sistema Risposta
Carichi Incrementali
Le condizioni finali possono essere equilibrate (quale tipo di equilibrio ?), ma possono condurre il sistema
verso una divergenza (statica e/o dinamica) della risposta.
5
Profilo Elastico Torsionalmente (1/2)
Angolo d�Attacco Profilo Rigido Portanza
Profilo Elastico
α"
θ"Rigidezza Torsionale
θ=θ0*exp(-jωt) U
α" mθ"θ"
6
Profilo Elastico Torsionalmente (2/2)
• Momento Aerodinamico dovuto all�incremento di Portanza: ΔM =ΔL*a • Momento di Richiamo Elastico: ΔMθ=mθ*θ"
A) ΔM e ΔMθ hanno lo stesso verso (Effetto Stabilizzante)"B) ΔMθ =0 (Indifferenza dell�Effetto) C) ΔM e ΔMθ hanno verso opposto (Effetto Instabilizzante)
C1) ΔM < ΔMθ (il profilo raggiunge l�equilibrio)"C2) ΔM = ΔMθ (il profilo è in equilibrio indifferente)"C3) ΔM > ΔMθ (il profilo diverge)""
""
7
Schema Funzionale in una Generica Condizione di Volo
Comportamento Dinamico delle
Strutture Forze Aerodinamiche Instazionarie
da Flusso Separato (sulle superfici portanti)
Meccanismo d�Interazione Aeroelastica di tipo Dinamico
Forze Aerodinamiche Instazionarie da Flusso Perturbato
(raffiche, turbolenze, ecc.)
Forze Aerodinamiche Instazionarie da Vibrazioni Strutturali
8
Meccanismi Funzionali: Flutter (Vibrazione Autoeccitata)
Comportamento Dinamico delle
Strutture
Forze Aerodinamiche Instazionarie da Vibrazioni Strutturali
9
Meccanismi Funzionali: Risposta Dinamica
Comportamento Dinamico delle
Strutture
Forze Aerodinamiche Instazionarie da Flusso Perturbato
(raffiche, turbolenze, ecc.)
Forze Aerodinamiche Instazionarie da Vibrazioni Strutturali
10
Meccanismi Fuzionali: Buffetting
Comportamento Dinamico delle
Strutture
Forze Aerodinamiche Instazionarie da Flusso Separato
(sulle superfici portanti)
Forze Aerodinamiche Instazionarie da Vibrazioni Strutturali
11
Il Concetto di Operatore
• Semplicisticamente l�operatore è un algoritmo matematico che trasforma una grandezza in ingresso in una in uscita.
• Suddivisione degli Operatori: – Strutturale – Inerziale – Smorzamento – Aerodinamico
Operatore Aeroelastico
12
Operatori Strutturali Lineari
• Classificazione degli operatori lineari: – strutturale: esplicita la risposta del sistema per la
parte proporzionale agli spostamenti – inerziale: esplicita la risposta del sistema per la
parte proporzionale alle accelerazioni – smorzamento viscoso: esplicita la risposta del
sistema per la parte proporzionale alle velocità
F mx cx kx= + +
13
Triangolo dell�Aeroelasticità di Collar (1946)
A
E I
14
Ramo A-E
! D Divergenza
! EC Efficacia dei Comandi
! IC Inversione dei Comandi
! DCE Distribuzione del Carico sul Velivolo Elastico
! SSE Stabilità Statica del Velivolo Elastico
15
Punto A e Ramo A-I
! DCR Distribuzione del Carico sul Velivolo
Rigido
! SSR Stabilità Statica del Velivolo Rigido
! SDR Stabilità Dinamica del Velivolo Rigido
16
Ramo I-E
! ID Impatto Dinamico
! V Dinamica delle Strutture o Meccanica
Vibratoria
17
. . . si entra nel triangolo AEI
! F Flutter
! B Buffetting
! RD Risposta Dinamica
! SDE Stabilità Dinamica del Velivolo
Elastico
18
Triangolo dell�Aeroservoelasticità
A
E S
aero
elasti
cità servoelasticità
aeroservodinamica
19
Triangolo dell�Aeroacustoelasticità
A
S A
aero
elasti
cità aeroacustica
acustoelasticità
20
Tetraedro Aerotermoelastico di Garrick
A
E I H
HEI Influenza della Temperatura sulla Dinamica delle Strutture
AHI Influenza della Temperatura sulla Stabilità del Velivolo AHE
Influenza della Temperatura sull�Aeroelasticità Statica
21
Formulazione Simbolica dell�Equazione Generale dell�Aeroelasticità (1/3)
• A(q) d2q/dt2+ B(q) dq/dt + C(q) q=A(q) q+QD
– A è l�operatore inerziale – B è l�operatore di smorzamento – C è l�operatore di rigidezza – A è l�operatore aerodinamico – Q è l�operatore di disturbo (non dipende da q) – q è la coordinata generalizzata.
• Non è stata fatta alcuna ipotesi restrittiva per questa rappresentazione formale
22
Equazione Generale dell�Aeroelasticità (2/3)
Ipotesi : Linearità degli Operatori A,B, e C
(A+B+C)q=A(q)q+QD ed esplicitando le funzionalità col tempo:
Si può anche esplicitare analogamente l’operatore aerodinamico:
Ad2qdt2+Bdqdt+Cq = A( q )q+QD
( ) ( ) ( )Ad qdt
Bdqdt
C q QD− + − + − =A B C2
2
23
Equazione Generale dell�Aeroelasticità (3/3)
[ ] [ ]( ){ }[ ] [ ]( ){ }
[ ] [ ]( ){ }{ }
A qB q
C qQD
−
+ −
+ −
=
AB
C
Formulazione Matriciale:
In corsivo è sempre indicato l�operatore aerodinamico corrispondente.
24
Esempi di Specializzazioni in Forma Matriciale
[ ] [ ]( ){ } [ ] [ ]( ){ } [ ] [ ]( ){ }A q B q C q− + − + − =A B C 0Flutter
[ ]{ } [ ]{ } [ ]{ } { }A q B q C q QD + + =Dinamica delle Strutture
Divergenza [ ] [ ]( ){ }C q− =C 0
[ ] [ ]( ){ } { }C q QD− =CAeroelasticità Statica
[ ] [ ]( ){ } [ ]{ } [ ]{ } { }A q q q QD− − − =A B C
Stabilità Dinamica del Velivolo Rigido (a e b)
[ ]{ } [ ]{ } { }A q q QD = +C
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
2
L’instabilita dinamica (flutter supersonico) diun pannello
Si vuole analizzare la risposta di un pannello sottile lambito da un latoda un flusso supersonico, mentre dall’altro c’e un volume in quiete. Si parladi aeroelasticita non portante poiche il flusso lambisce una sola faccia delpannello, e quindi non puo generare portanza.
Si scriveranno prima le equazioni del pannello isolato e successivamente siinserira l’aerodinamica per risolvere il problema aeroelastico.
Questo schema e stato sviluppato con la collaborazione dell’Ing. ErnestoMonaco.
2.1 Equazioni del moto di un pannello sottile
Scriviamo le equazioni del moto per un pannello sottile non smorzato,caricato da una distribuzione di pressione generica p(x, y, t). Sia il pannellosottile di lati di lunghezza a e b, lungo gli assi x e y rispettivamente, in unsistema di riferimento cartesiano ortogonale O
xyz
.
Figura 2.1: pannello aeroelastico e relativo sistema di riferimento.
L’equazione del pannello sottile e
22 2 L’instabilita dinamica (flutter supersonico) di un pannello
Dh⇣ @4
@x4
+@4
@x2@y2+
@4
@y4
⌘
w(x, y, t)i
+ ⇢sh@2w(x, y, t)
@t2+ p(x, y, t) = 0 (2.1)
o equivalentemente
Dr4w(x, y, t) +m@2w(x, y, t)
@t2+ p(x, y, t) = 0 (2.2)
dove:
• w(x, y, t) e lo spostamento incognito del pannello;• x e y sono le coordinate spaziali;• t e la coordinata temporale;• ⇢s e la densita di massa del pannello;• h e lo spessore del pannello;• D e la rigidezza flessionale del pannello per unita di apertura;• p(x, y, t) e il carico di pressione che agisce sul pannello;• m = ⇢sh e la massa del pannello.
2.1.1 Soluzione dell’equazione omogenea associata
Supponendo che il pannello sia incernierato sui quattro lati (spostamenti eloro derivate seconde nulli), gli spostamenti del pannello sono cosı esprimibili:
w(x, y, t) =1X
p=1
1X
r=1
sin⇣p⇡x
a
⌘
sin⇣r⇡y
b
⌘
qpr(t) (2.3)
o equivalentemente
w(x, y, t) =1X
p=1
1X
r=1
pr(x, y)qpr(t) (2.4)
dove pr(x, y) l’autovettore del problema omogeneo. Dalla (2.4) si comprendecome si sia passati da una variabile tridimensionale w(x, y, t) al prodotto didue variabili:
• pr(x, y) sono gli autovettori, che sono noti (avendo imposto le condizionial contorno);
• qpr(t) e la variabile lagrangiana modale, dipendente solo dal tempo.
Gli autovettori soddisfano ovviamente l’equazione omogenea associata
Dr4 pr(x, y)� !2
prm pr(x, y) = 0 (2.5)
dove gli autovalori !pr (pulsazioni proprie) sono dati da
!2
pr =
s
D
⇢sh
h⇣p⇡
a
⌘
2
+⇣r⇡
b
⌘
2
i
(2.6)
2.1 Equazioni del moto di un pannello sottile 23
con p, r 2 {1, 2, . . . , N}.Si osservi che per denotare un singolo autovettore pr(x, y) occorre una
coppia di interi (p, r), che definisce in modo univoco un modo proprio divibrare del pannello e la corrispondente pulsazione propria. In particolare lacoppia d’interi (p, r) rappresenta il numero di semionde flessionali sviluppatesecondo gli assi x e y, rispettivamente, come mostrato nella Figura 2.2.
Figura 2.2: autovettore p=1,r=3
(x, y)
L’espansione modale qui presentata e applicabile anche a casi in cui le con-dizioni al contorno del pannello siano diverse da quelle del semplice appoggio.In tal caso, l’intero procedimento e approssimato (sviluppo di Rayleigh - Ritz)in quanto sia l’espansione dei modi spaziali sia le autosoluzioni temporali sonograndezze approssimate.
Si noti inoltre che spesso e arduo classificare i modi propri mediante il con-teggio delle semionde in due direzioni ortogonali: basti pensare che il pannello,in generale, potrebbe non essere dotato di regolarita geometrica.
Pertanto, l’espansione modale esatta presentata in questo capitolo e pos-sibile solo in pochi casi.
2.1.2 Soluzione dell’equazione completa
Nel paragrafo precedente, si e delineata una procedura per modellare l’op-eratore strutturale, trovando una soluzione per l’equazione omogenea associ-ata. Si cercano ora soluzioni modali anche per l’equazione completa, in cui epresente un generico carico di pressione p(x, y, t). I passi da eseguire sono, insequenza:
1. sostituire l’espansione modale (2.3) nell’equazione del moto (2.1);2. moltiplicare l’equazione cosı ottenuta per un nuovo autovettore mn(x, y);3. integrare sul dominio spaziale, ovvero sull’area del pannello;4. per la proprieta di ortogonalita dei modi propri, le soluzioni non nulle si
hanno solo se p = m e r = n.
24 2 L’instabilita dinamica (flutter supersonico) di un pannello
Per ogni modo proprio considerato, si ottiene un’equazione del tipo
mpr qpr(t) +mpr!2
prqpr(t) = �Z a
0
Z b
0
p(x, y, t) pr(x, y) dx dy. (2.7)
Si noti che al secondo membro della (2.7) compare la capacita che la gener-ica distribuzione di pressione p(x, y, t) ha di compiere lavoro sul modo proprio mn(x, y). Al primo membro troviamo i termini modali, in particolare:
• la massa generalizzata, data da
mprmn = ⇢sh
Z a
0
Z b
0
pr(x, y) mn(x, y) dx dy =
= mpr = ⇢sh
Z a
0
Z b
0
[ pr(x, y)]2 dx dy =
1
4⇢shab.
(2.8)
Quindi, la massa generalizzata e pari ad 1
4
della massa totale del pannello;• la rigidezza generalizzata, data da
kpr = mpr!2
pr. (2.9)
2.1.3 Carico di pressione puntuale
Nello sviluppo e↵ettuato sinora, la pressione e stata considerata un caricoarbitrario e non specificato. Consideriamo il caso in cui la pressione sia diorigine meccanica e puntualmente agente sul pannello in un punto (xF , yF ),ovvero
p(x, y, t) = f(t)�(x� xF )�(y � yF ). (2.10)
Nella (2.10) si e fatto uso della funzione di Dirac �(x � xF ). In questo caso,la (2.7) diventa
mpr qpr(t) +mpr!2
prqpr(t) = �f(t)
Z a
0
Z b
0
�(x� xF )�(y � yF ) pr(x, y) dx dy.
(2.11)Risolvendo, si ottiene
mpr qpr(t) +mpr!2
prqpr(t) = �f(t) sin⇣p⇡xF
a
⌘
sin⇣r⇡yF
b
⌘
. (2.12)
A questo punto, si ricercano soluzioni armoniche per la (2.12), imponendoche:
qpr(t) = Apre�j!t (2.13)
f(t) = Fe�j!t (2.14)
con j =p�1. E facile dimostrare che la soluzione dell’equazione completa e
data dall’espansione
2.2 Aerodinamica instazionaria 25
w(x, y, t) = e�j!t1X
p=1
1X
r=1
Apr sin⇣p⇡x
a
⌘
sin⇣r⇡y
b
⌘
=
= Fe�j!t1X
p=1
1X
r=1
sin⇣
p⇡xa
⌘
sin⇣
r⇡yb
⌘
sin⇣
p⇡xF
a
⌘
sin⇣
r⇡yF
b
⌘
mpr!2
pr �mpr!2
.
(2.15)
Dato che la massa generalizzata e costante, come dimostrato nella (2.8), sipuo semplificare ulteriormente la (2.15), ottenendo in conclusione
w(x, y, t) =4F
⇢shabe�j!t
1X
p=1
1X
r=1
sin⇣
p⇡xa
⌘
sin⇣
r⇡yb
⌘
sin⇣
p⇡xF
a
⌘
sin⇣
r⇡yF
b
⌘
!2
pr � !2
.
(2.16)Per regolare il comportamento in condizioni di risonanza (! = !pr), e
necessario introdurre uno smorzamento; il metodo piu semplice per introdurrelo smorzamento del pannello nel modello analitico e quello di considerare unmodulo di elasticita complesso. Nel caso in esame, si definisce una rigidezzaflessionale complessa D(1 + ⌘), dove ⌘ il coe�ciente di smorzamento.
In tal caso, la risposta del pannello in presenza di smorzamento e pari a
w(x, y, t) =4F
⇢shabe�j!t
1X
p=1
1X
r=1
sin⇣
p⇡xa
⌘
sin⇣
r⇡yb
⌘
sin⇣
p⇡xF
a
⌘
sin⇣
r⇡yF
b
⌘
(!2
pr � !2) + j⌘!2
pr
.
(2.17)La (2.17) e l’equazione del pannello nelle ipotesi di pannello:
• isolato;• forzato, con un carico puntuale in (xF , yF );• smorzato (che e l’ipotesi piu forte per il modello di smorzamento assunto).
2.2 Aerodinamica instazionaria
Nello sviluppo presentato al paragrafo precedente, si e supposto che il cari-co di pressione sia un termine noto, indipendentemente dalla sua origine. Sicercano adesso delle espressioni che rendano il fenomeno fisico dell’accoppia-mento dei moti del pannello investito da una corrente di note proprieta. Impos-tiamo, quindi, l’operatore aerodinamico da accoppiare poi a quello strutturale,in vista del modello aeroelastico completo.
Per trovare un’espressione delle forze aerodinamiche generalizzate, ovveroil secondo membro della (2.7), bisogna scrivere l’equazione di↵erenziale cheregola il potenziale di velocita per piccoli disturbi di un fluido irrotazionale,inviscido, parallelo all’asse x. Tale equazione e
r2� =1
C
⇣@2�
@t2+ 2U
@2�
@t@x+ U2
@2�
@x2
⌘
(2.18)
dove:
26 2 L’instabilita dinamica (flutter supersonico) di un pannello
• � e il potenziale di velocita;• U e la velocita della corrente asintotica;• C e la velocita della corrente asintotica.
Le condizioni al contorno per il potenziale sono:
�|z!1 = 0 condizione asintotica (2.19)
@�
@z|z!0
=
(
@w@t + U @w
@x , sul pannello
0, fuori dall’area del pannello(2.20)
A parte la condizione asintotica, e necessario so↵ermarsi sulla condizioneal contorno definita sul pannello, che risulta essere una condizione di ac-coppiamento. Essa e indicativa dell’interazione del fluido con il pannello invibrazione, poiche la vibrazione del pannello determina un disturbo sullavelocita del fluido che lo lambisce.
In particolare, la velocita sul pannello e data dalla somma di due contribu-ti:
• @w@t , dovuta alla condizione di continuita, secondo cui una particella difluido sul pannello ha una velocita pari alla velocita di vibrazione delpannello stesso;
• U @w@x , che e la componente convettiva, dovuta al fatto che c’e un flusso di
massa che lambisce il pannello con velocita U .
Al di fuori dell’area del pannello, la corrente e indisturbata, e pertanto ilpannello definisce uno schermo (ba✏e) di disturbo.
La soluzione del problema puo essere trovata adottando una doppia trasfor-mata di Fourier (una rispetto alle coordinate spaziali ed una rispetto alla co-ordinata temporale) sia dell’equazione (2.18) che delle relative condizioni alcontorno.
A questo punto, e necessario introdurre un legame tra il potenziale divelocita della corrente e la pressione, ovvero del carico aerodinamico che agiscesul pannello. Si introduce pertanto la relazione di Bernoulli
p = �⇢f⇣@�
@t+ U
@�
@x
⌘
(2.21)
dove con ⇢f si e indicata la densita di massa del fluido considerato.Nel caso di moto supersonico, in particolare per M1 > 1.5, e possibile
semplificare la relazione di Bernoulli, descrivendo la distribuzione di pressionemediante la Piston Theory, che costituisce un notevole vantaggio. La Piston
Theory e un modello locale tale che il carico agente in un punto del pan-nello e indipendente da quanto accade negli altri punti, come se su ognunodi essi agisse un pistone ad esercitare la pressione. Questo tipo di approcciofornisce una relazione tra lo spostamento w(x, y, t) del pannello, ovvero l’op-eratore strutturale, e la pressione p(x, y, t), ovvero l’operatore aerodinamico.In particolare, e possibile scrivere:
2.2 Aerodinamica instazionaria 27
not stationary piston theory p = �⇢fC⇣@w
@t+ U
@w
@x
⌘
(2.22)
stationary piston theory p = �⇢fC⇣
U@w
@x
⌘
(2.23)
Il vantaggio dell’utilizzo della Piston Theory e che, mediante alcuni pas-saggi matematici, si giunge a scrivere la parte aerodinamica associata alla vi-brazione del pannello, cioe la distribuzione di pressione, nelle stesse coordinatemodali utilizzate per l’equazione del pannello.
Utilizzando le (2.3),(2.7),(2.22), e possibile ottenere:
mpr qpr(t) +mpr!2
prqpr(t) + ⇢fU2Qpr(t) = 0 (2.24)
dove
Qpr(t) =
Z a
0
Z b
0
p(x, y, t)
⇢fU2
pr(x, y) dx dy. (2.25)
La matrice Qpr e una matrice modale, e rappresenta il lavoro che la dis-
tribuzione di pressione p(x, y, t) svolge per il modo proprio pr. E una matricepiena, nella quale:
• sulla diagonale, troviamo il lavoro che la distribuzione di pressione p(x, y, t)dovuta al modo ij svolge sul modo ij stesso;
• fuori dalla diagonale, troviamo il lavoro che la distribuzione di pressionep(x, y, t) dovuta al modo ij svolge sul modo mn, con (i, j) 6= (m,n);
Pertanto, per descrivere ogni termine della matrice Qpr sono necessari 4indici, poiche il termine Qprmn esprime il lavoro compiuto dalle forze aerod-inamiche dovute al modo pr-simo del pannello per gli spostamenti associatial modo mn-esimo. La forza generalizzata relativa al modo pr-esimo del pan-nello Qpr e data dalla somma dei contributi dei lavori compiuti dalle forzeaerodinamiche di tutti i modi mn-esimi del pannello, ovvero:
Qpr =MX
m=1
NX
n=1
Qprmn (2.26)
Grazie alla Piston Theory, la matrice Qpr puo essere scomposta in unaparte statica ed una dinamica, ottenendo
Qpr =MX
m=1
NX
n=1
h
Q(s)prmn +Q(d)
prmn
i
=MX
m=1
NX
n=1
h
qmn(t)Sprmn + qmn(t)Dprmn
i
.
(2.27)Nella (2.27), la matrice Spr e la matrice statica, legata all’e↵etto aerodinamicostazionario, ed e rappresentativa della rigidezza introdotta dalla parte aerod-inamica (si parla di matrice di rigidezza aerodinamica generalizzata); la ma-trice Dpr e la matrice dinamica, legata all’e↵etto aerodinamico instazionario,e tiene conto dello smorzamento introdotto dalla parte aerodinamica (matricedi smorzamento aerodinamico generalizzata).
28 2 L’instabilita dinamica (flutter supersonico) di un pannello
Utilizzando la (2.22), e possibile andare a calcolare le matrici Spr e Dpr.Indicando con M1 il numero di Mach della corrente asintotica, e possibilescrivere:
Sprmn =1
M1
Z a
0
Z b
0
@ pr(x, y)
@x mn(x, y) dx dy =
=1
M1
"
Z b
0
sin⇣r⇡y
b
⌘
sin⇣n⇡y
b
⌘
dy
#"
p⇡
a
Z a
0
cos⇣p⇡x
a
⌘
sin⇣m⇡x
a
⌘
dx
#
(2.28)
Dprmn =1
(U)(M1)
Z a
0
Z b
0
pr(x, y) mn(x, y) dx dy =
=1
(U)(M1)
"
Z b
0
sin⇣r⇡y
b
⌘
sin⇣n⇡y
b
⌘
dy
#"
Z a
0
sin⇣p⇡x
a
⌘
sin⇣m⇡x
a
⌘
dx
#
(2.29)
Risolvendo gli integrali (2.28) e (2.29), si ottiene:
Sprmn =
(
0 se r 6= n o p = m
� pM1
⇣
b4
⌘h
(m�p) cos[⇡(m+p)]+(m+p) cos[⇡(m�p)]�2m(m�p)(m+p)
i
se r = n o p 6= m
(2.30)
Dprmn =
(
0 se r 6= n o p 6= mab
4(U)(M1)
⌘ Dpr se r = n o p = m(2.31)
La novita dell’approccio e↵ettuato sta nell’utilizzare la base modale persviluppare sia l’operatore strutturale che quello aerodinamico. Infatti, grazieall’ipotesi di lavoro della teoria del pistone, le equazioni si presentano tutte infunzione degli spostamenti del pannello, espressi dall’unica variabile modaleq(t).
2.3 Equazioni aeroelastiche
E possibile a questo punto impostare il problema aeroelastico nella suaforma piu immediata, sfruttando le relazioni sin qui ottenute. In particolare,considerando i modi del pannello con ordine massimo N lungo x ed M lungoy, e possibile scrivere un’equazione di questo tipo:
mpr qpr(t) +mpr!2
prqpr(t) + ⇢fU2
MX
m=1
NX
n=1
h
qmn(t)Sprmn + qmn(t)Dprmn
i
= 0
(2.32)
2.3 Equazioni aeroelastiche 29
con p 2 {1, 2, . . . , N} e r 2 {1, 2, . . . ,M}.Si ricorda che, anche se di di�cile lettura, il doppio indice e strettamente
necessario in quanto la coppia d’interi definisce univocamente il modo delpannello. In forma matriciale, la (2.32) diventa:
1
4ab⇢sh[I]
8
>
>
>
>
<
>
>
>
>
:
q1,1(t)......
qN,M (t)
9
>
>
>
>
=
>
>
>
>
;
+1
4ab⇢sh
2
6
6
6
6
4
!2
1,1 0 . . . 0
0. . . . . . 0
. . . . . .. . . . . .
0 0 . . . !2
N,M
3
7
7
7
7
5
8
>
>
>
>
<
>
>
>
>
:
q1,1(t)......
qN,M (t)
9
>
>
>
>
=
>
>
>
>
;
=
�⇢fU2
2
6
6
6
6
4
S1,1�1,1 . . . . . . S
1,1�N,M
.... . . . . . 0
... . . .. . .
...SN,M�1,1 . . . . . . SN,M�N,M
3
7
7
7
7
5
8
>
>
>
>
<
>
>
>
>
:
q1,1(t)......
qN,M (t)
9
>
>
>
>
=
>
>
>
>
;
� ⇢fU
M1
ab
4[I]
8
>
>
>
>
<
>
>
>
>
:
q1,1(t)......
qN,M (t)
9
>
>
>
>
=
>
>
>
>
;
(2.33)
dove [I] e la matrice identica.Dalla (2.33) e possibile notare alcuni fatti salienti:
• per U = 0 il sistema d’equazioni si disaccoppia totalmente, ottenendo tanteequazioni ad un grado di liberta quanti sono i modi del pannello scelti perla rappresentazione del fenomeno (scompare il problema aerodinamico, eresta il problema strutturale lineare);
• e solo grazie all’aerodinamica che il sistema d’equazioni di↵erenziali ordi-narie del secondo ordine omogeneo e tale;
• il sistema, in generale, ammette delle (auto)soluzioni dipendenti da U (equindi da M1);
• le matrici [S] e [D] al secondo membro, come gia accennato, possono es-sere definite rispettivamente come matrici di rigidezza e di smorzamentoaerodinamiche;
• [D] e diagonale;• [S] non e diagonale, e quindi non e possibile disaccoppiare i modi pro-
pri. L’analisi modale in questo caso non permette il disaccoppiamentodelle equazioni, ma permette comunque di esprimere anche le forze aerodi-namiche generalizzate mediante la stessa coordinata lagrangiana utilizzataper la risposta del pannello.
Si deduce pertanto che l’interazione fluido-struttura al variare della veloc-ita determina una variazione delle proprieta del pannello in termini di rigidez-za e smorzamento che puo portare ad un’instabilita aeroelastica. L’analisi del-l’instabilita aeroelastica consiste nel ricercare quelle velocita in corrispondenzadelle quali:
• si annulla la rigidezza del sistema aeroelastico, ed in questo caso parliamodi divergenza (instabilita statica);
30 2 L’instabilita dinamica (flutter supersonico) di un pannello
• si annulla lo smorzamento del sistema aeroelastico, ed in questo casoparliamo di flutter (instabilita dinamica).
2.4 Sistema ad un grado di liberta
Per comprendere meglio il significato dei singoli operatori e dei calcoli dae↵ettuare, e opportuno partire dal sistema aeroelastico piu semplice, in cui siconsidera solo il primo modo del pannello (quindi con p = r = 1). L’equazionedel sistema e
1
4ab⇢shq1,1(t) +
1
4ab⇢sh!
2
1,1q1,1(t) + ⇢fU2S
1,1�1,1q1,1(t) +⇢fU
M1
ab
4q1,1(t) = 0.
(2.34)Dato che S
1,1�1,1 = 0, dividendo primo e secondo membro per ab4
eponendo per semplicita q
1,1 ⌘ q e !1,1 ⌘ ⌦, la (2.34) diventa:
⇢shq(t) + ⇢sh⌦2q(t) + ⇢fCq(t) = 0 (2.35)
dove chiaramente C = UM1
e la velocita del suono della corrente asintotica.
Si cercano soluzioni armoniche del tipo q(t) = q0
e�t.L’equazione secolare a cui si perviene e
h
�2 + �⇣⇢fC
⇢sh
⌘
+⌦2
i
q0
= 0 (2.36)
da cui si ricava
� = �1
2
⇣⇢fC
⇢sh
⌘
±
s
⇣⇢fC
⇢sh
⌘
2
� 4⌦2. (2.37)
Dall’esame della (2.37) si puo dedurre che si ottengono autovalori comp-
lessi solo se⇣
⇢fC⇢sh
2
< 4⌦2
⌘
. In tal caso, gli autovalori sono necessariamente
complessi coniugati a parte reale negativa.Allo stesso tempo, e possibile constatare che nel caso di autovalori pura-
mente reali, essi sono certamente minori di zero (al massimo nulli).Si ricordi a questo punto che per come si e sviluppata la procedura di
estrazione degli autovalori, la condizione necessaria a�nche si abbia instabilitaaeroelastica (panel flutter) e che la parte reale dell’autovalore deve esserepositiva, ovvero Re(�) > 0.
Sulla base delle precedenti considerazioni, e possibile a↵ermare che:
• non e verificabile un’instabilita instazionaria aeroelastica dei pannelli adun grado di liberta;
• il sistema in queste approssimazioni non dipende dalla velocita del flusso;• se si esplicitasse l’operatore stazionario associato alla Piston Theory, nel
caso di sistema ad un grado di liberta scomparirebbe del tutto la parteaerodinamica.
2.5 Sistema a due gradi di liberta 31
2.5 Sistema a due gradi di liberta
Si esamino ora un sistema aeroelastico instazionario in cui si consid-erano solo i primi due modi del pannello (p = 1, 2; r = 1). L’equazione delsistema e
1
4ab⇢sh
1 00 1
�⇢
q1,1(t)q2,1(t)
�
+1
4ab⇢sh
!2
1,1
0 !2
2,1
�⇢
q1,1(t)q2,1(t)
�
=
� ⇢fU2
S1,1�1,1 S
1,1�2,1
S2,1�1,1 S
2,1�2,1
�⇢
q1,1(t)q2,1(t)
�
� ⇢fU
M1
ab
4
1 00 1
�⇢
q1,1(t)q2,1(t)
�
. (2.38)
Dato che S1,1�1,1 = S
2,1�2,1 = 0, dividendo ambo i membri per 1
4
ab⇢sh eponendo per semplicita
• q1,1 ⌘ q
1
;• q
2,1 ⌘ q2
;• !
1,1 ⌘ ⌦1
;• !
2,1 ⌘ ⌦2
;
la (2.38) diventa
⇢
q1
(t)q2
(t)
�
+⇢fC
⇢sh
⇢
q1
(t)q2
(t)
�
⌦2
1
00 ⌦2
2
�
+⇢fU2
⇢sh
4
ab
0 S1,1�2,1
S2,1�1,1 0
�
!
⇢
q1
(t)q2
(t)
�
=
⇢
00
�
.
(2.39)Si cercano ancora soluzioni del tipo q(t) = q
0
e�t. L’equazione secolare e laseguente
⇣
�2 +⇢fC
⇢sh�+⌦2
1
⌘⇣
�2 +⇢fC
⇢sh�+⌦2
2
⌘
�⇣⇢fU2
⇢sh
4
ab
⌘
2
S2,1�1,1S1,1�2,1 = 0.
(2.40)Dalla (2.30), e possibile calcolare S
1,1�2,1 = �S2,1�11
= 2
3
bM1
. Sostituen-do nell’equazione secolare (2.40), si ricava:
⇣
�2 +⇢fC
⇢sh�+⌦2
1
⌘⇣
�2 +⇢fC
⇢sh�+⌦2
2
⌘
+⇣⇢fU2
⇢sh
4
ab
⌘
2
⇣2
3
b
M1
⌘
2
= 0 (2.41)
⇣
�2 +⇢fC
⇢sh�+⌦2
1
⌘⇣
�2 +⇢fC
⇢sh�+⌦2
2
⌘
+⇣⇢fUC
⇢sha
8
3
⌘
2
= 0 (2.42)
La (2.42) e un’equazione del quarto grado biquadratica caratterizzata dasoluzioni note e dipendenti da:
• caratteristiche del pannello;• quota (densita e velocita caratteristica del suono);• velocita asintotica.
32 2 L’instabilita dinamica (flutter supersonico) di un pannello
E possibile quindi e↵ettuare analisi parametriche delle variazioni degli au-tovalori di flutter. Quella che in questo ambito si ritiene piu facilmente in-terpretabile permette di inseguire i valori delle parti reali e immaginarie deiquattro autovalori per un fissato numero di Mach al variare della velocita delfluido. In altre parole, al variare della velocita asintotica, la quota (e quindi lavelocita caratteristica del suono) varia in maniera tale che il numero di Machsi mantenga costante. Da un punto di vista matematico, cio corrisponde nelsostituire nell’equazione (2.42) C = U
M1, considerare il numero di Mach come
una costante assegnata e U unica variabile indipendente del problema.Si osservi che l’autovalore � e pari a � = ⌘ + j!.I risultati ottenuti sono mostrati dalle Figure 2.3 e 2.4, in cui sono riportati
rispettivamente gli andamenti di frequenze naturali ! = Im(�) e smorzamenti
⇣ = Re(�)Im(�) del sistema aeroelastico con la velocita asintotica.
E facilmente verificabile che i quattro autovalori del problema aeroelasticosono caratterizzati da parti reali e parti immaginarie a due a due uguali e op-poste tra loro, ovvero si ritrovano le stesse soluzioni mediante uno sfasamentodi 180 gradi. Inoltre, e immediato constatare che le due soluzioni corrispon-dono per U = 0 (operatore aerodinamico assente) agli autovalori puramentestrutturali. In tale ottica, e possibile interpretare l’analisi aeroelastica come lavariazione degli autovalori strutturali dovuta ad un disturbo esterno di tipoaerodinamico.
Dalla Figura 2.3 risulta che all’aumentare della velocita, le frequenze pro-prie del sistema convergono ad un unico valore. Giunti alla velocita di co-alescenza, i modi propri sono in grado di scambiarsi energia. Questa e unacondizione necessaria ma non su�ciente per avere panel flutter. La condizionefondamentale e riportata nella Figura 2.4: l’aumento di velocita fa cambiarecon continuita lo smorzamento aerodinamico (lo smorzamento strutturale e
Figura 2.3: frequenze naturali del sistema instazionario al variare della velocitaa Mach fissato (M1 = 2).
2.5 Sistema a due gradi di liberta 33
Figura 2.4: smorzamenti del sistema instazionario al variare della velocita aMach fissato (M = 21).
nullo in quanto si considera la struttura conservativa), ed in corrispondenzadella velocita di coalescenza uno dei due smorzamenti prima si annulla, poidiventa positivo.
La frequenza di coalescenza e la corrispondente velocita sono denominatedi flutter , ed in accordo con quanto detto prima e possibile a↵ermare che lacondizione di panel flutter si raggiunge quando il disturbo aerodinamico an-nulla lo smorzamento complessivo del sistema e porta a coalescenza le partiimmaginarie dei due autovalori (pulsazioni). Fisicamente, in corrispondenzadella velocita di flutter i modi del pannello si accoppiano per via aerodinam-ica (ad esempio, il modo (1,1) introduce una distribuzione di pressione chelavora per il modo (2,1)), e quindi sono in grado di scambiarsi energia. Diconseguenza, il fluido invece di estrarre energia dalla struttura (dissipandola),la rifornisce di quest’ultima (permettendo l’accoppiamento tra i modi) proprioin corrispondenza di una frequenza propria del sistema accoppiato, creandouna tipica situazione di instabilita dinamica.
Esaminiamo ora il sistema aeroelastico stazionario in cui si consider-ano ancora solo i primi due modi del pannello (p = 1, 2; r = 1). L’equazionedel sistema e simile alla (2.38), con la sola di↵erenza che non e presente iltermine instazionario q.
1
4ab⇢sh
1 00 1
�⇢
q1,1(t)q2,1(t)
�
+1
4ab⇢sh
!2
1,1
0 !2
2,1
�⇢
q1,1(t)q2,1(t)
�
=
= �⇢fU2
S1,1�1,1 S
1,1�2,1
S2,1�1,1 S
2,1�2,1
�⇢
q1,1(t)q2,1(t)
�
(2.43)
Mediante le stesse assunzioni utilizzate per scrivere la (2.39), e possibileriscrivere la (2.43) come
34 2 L’instabilita dinamica (flutter supersonico) di un pannello
Figura 2.5: frequenze naturali del sistema stazionario al variare della velocitaa Mach fissato (M = 21).
Figura 2.6: smorzamenti del sistema stazionario al variare della velocita aMach fissato (M = 21).
⇢
q1
(t)q2
(t)
�
⌦2
1
00 ⌦2
2
�
+⇢fU2
⇢sh
4
ab
0 S1,1�2,1
S2,1�1,1 0
�
!
⇢
q1
(t)q2
(t)
�
=
⇢
00
�
. (2.44)
Cercando ancora soluzioni armoniche per la (2.44), e calcolando i terminidella matrice [S], l’equazione secolare a cui si giunge e la seguente:
⇣
�2 ++⌦2
1
⌘⇣
�2 ++⌦2
2
⌘
+⇣⇢fUC
⇢sha
8
3
⌘
2
= 0. (2.45)
A questo punto, e possibile svolegere un’analisi analoga a quella fatta peril sistema instazionario, diagrammando nelle Figure 2.5 e 2.6 l’andamento di
2.6 Generalizzazione 35
pulsazioni e smorzamento in funzione della velocita del fluido (a numero diMach fissato). Le dimensioni caratteristiche del pannello e del fluido sono in-alterate rispetto al caso instazionario. I risultati dimostrano che modellandol’operatore strutturale mediante solo due gradi di liberta e possibile ricavareuna velocita d’instabilita aeroelastica anche in condizioni aerodinamiche pura-mente stazionarie. L’unica variazione significativa rispetto al caso stazionarioe che lo smorzamento non subisce variazioni fino alla velocita di flutter (datoche la struttura e conservativa e non e presente la matrice di smorzamentoaerodinamico [D]).
Limiti della trattazione del sistema a due gradi di liberta
E opportuno evidenziare che l’analisi e↵ettuata, per quanto particolar-mente utile da un punto di vista teorico per chiarire i meccanismi dell’in-stabilita in questione, potrebbe portare a deduzioni errate se non interpretateadeguatamente. L’approccio utilizzato nell’analisi parametrica delle variazionidegli autovalori consiste nel fissare il numero di Mach supersonico a priori ecollegare la variazione di velocita con quella della quota. E chiaro a questopunto che, se si andasse ad indagare a quale quota si otterrebbe la velocitadi flutter per il fissato numero di Mach, potrebbe risultare che tale fenomenoavvenga ben oltre l’atmosfera terrestre per alcune configurazioni geometrichedel pannello scelto. Un tale risultato e chiaramente privo di riscontro fisicoavendo scelto come densita del fluido quella dell’aria.
Inoltre, si deve notare che superata la frequenza di flutter una delle duesoluzioni armoniche tende a zero, ovvero il sistema si porta in una condizionedi divergenza statica (la frequenza di flutter tende ad una condizione in cuil’autovalore corrispondente e nullo): cio e un’approssimazione introdotta dalmodello a pochi gradi di liberta.
2.6 Generalizzazione
In forma matriciale, la relazione generale per un numero T = N · M dimodi presenti nel sistema e
mg[I]{q(t)}+mg[⌦]{q(t)}+ ⇢fU2[S]{q(t)}+ ⇢fU
2[D]{q(t)} = {0} (2.46)
dove con [I] si e indicata la matrice identica, con [⌦] la matrice diagonaledelle pulsazioni naturali al quadrato. Ordinando i termini, e possibile scrivere
[I]{q(t)}+ ⇢fU2
mg[D]{q(t)}+
⇣⇢fU2
mg[S] + [⌦]
⌘
{q(t)} = {0}. (2.47)
Una scrittura comoda e formalmente piu corretta e la seguente:
[I]{q(t)}+ [B(U)]{q(t)}+ [C(U)]{q(t)} = {0}. (2.48)
36 2 L’instabilita dinamica (flutter supersonico) di un pannello
Riportiamo l’esame degli autovalori. Cio e possibile riscrivendo intera-mente il problema, passando pero ad un problema a 2T gradi di liberta nellospazio degli stati (raddoppia l’ordine del sistema di equazioni di↵erenziali, maci si riconduce ad un problema di estrazione degli autovalori perfettamentesimmetrico).
[0] [I][I] [B(U)]
�⇢
{q(t)}{q(t)}
�
+
�[I] [0][0] [C(U)]
�⇢
{q(t)}{q(t)}
�
=
⇢
00
�
(2.49)
Ponendo {z(t)} =
⇢
{q(t)}{q(t)}
�
= {Z}e�t, ci si riconduce al problema agli
autovalori (2.50).
�
[0] [I][I] [B(U)]
�
+
�[I] [0][0] [C(U)]
�
!
{Z} =
⇢
00
�
�
[0] [I][I] [B(U)]
��1
[0] [I][I] [B(U)]
�
+
[0] [I][I] [B(U)]
��1
�[I] [0][0] [C(U)]
�
=
⇢
00
�
�
[I] [0][0] [I]
�
=
�[B(U)] [�C(U)][I] [0]
�
=
⇢
00
�
(2.50)
Si osservi che nei passaggi precedenti si sono considerate le sub-matricicome fossero scalari. 1
L’implementazione della (2.50) in un foglio di calcolo permette di anal-izzare diversi casi di panel flutter. In particolare, nel paragrafo successivovengono riportati diversi risultati, relativi a casi di↵erenti, ottenuti medianteun foglio elettronico Mathcad.
2.7 Soluzioni di riferimento
Nel seguito sono riportate alcune soluzioni di riferimento relative ad unpannello:
• in alluminio (modulo di Young E = 7.102 · 1010Pa, modulo di Poisson⌫ = 0.33);
• di lati a = 20in, b = 14in e spessore h = 0.041in;• con smorzamento strutturale ⌘S = 0.01;• lambito da una corrente supersonica (M1 = 2) con densita ⇢f = 0.525kg/m3
e velocita caratteristica del suono pari a cf = 340m/s.
La di↵erenza tra i casi proposti sta nel tipo di modello (stazionario oinstazionario) e nel numero T di modi scelto.
1 In particolare, si ha che
0 11 b
��1
=
�b 11 0
�
2.7 Soluzioni di riferimento 37
2.7.1 Modello stazionario, T = 2
Dalla Figura 2.7, si comprende come in prossimita della velocita di flut-ter le frequenze naturali vanno a coalescenza, allontanandosi dalle frequenzestrutturali. Dalla Figura 2.8, invece, si evince come i valori degli smorzamentimodali sono inizialmente pari allo smorzamento strutturale ⌘s e non subisconovariazioni fino alla velocita di flutter, in corrispondenza della quale uno deidue diviene positivo.
Figura 2.7: frequenze naturali al variare della velocita (T = 2, stazionario).
Figura 2.8: smorzamenti al variare della velocita (T = 2, stazionario).
2.7.2 Modello instazionario, T = 2
Dal confronto tra la Figura 2.9 e la Figura 2.7, risulta che le frequenzenaturali hanno lo stesso andamento con la velocita sia nel caso di model-lo stazionario che di modello instazionario. Diverso il comportamento dello
38 2 L’instabilita dinamica (flutter supersonico) di un pannello
smorzamento. Infatti, mentre nel modello stazionario alle basse velocita glismorzamenti del sistema aeroelastico restano costanti e pari allo smorzamen-to strutturale, nel caso di modello instazionario essi deviano dallo smorza-mento strutturale per e↵etto delle forze aerodinamiche che hanno un e↵ettosmorzante. Anche in questo caso, comunque, in corrispondenza della velocitadi flutter uno degli smorzamenti diventa positivo, e quindi si passa in unacondizione di instabilita aeroelastica.
Figura 2.9: frequenze naturali al variare della velocita (T = 2, instazionario).
Figura 2.10: smorzamenti al variare della velocita (T = 2, instazionario).
2.7.3 Modello stazionario, T = 6
Nella Figura 2.11 sono rappresentati le frequenze naturali relative al primo,secondo e sesto modo proprio del sistema aeroelastico. E possibile evincere che
2.7 Soluzioni di riferimento 39
quando il sistema considerato ha piu gradi di liberta, puo capitare che nontutti siano influenzati dall’aerodinamica. Si osserva infatti che la pulsazionenaturale corrispondente al sesto modo proprio di vibrare del sistema aeroe-lastico resta insensibile alle variazioni di velocita, restando constantementepari alla pulsazione naturale del pannello. Pertanto, questo modo non scam-bia energia con altri modi. Al contrario, le pulsazioni relative ai primi duemodi propri di vibrare vanno a coalescenza all’aumentare della velocita. DallaFigura 2.12, in cui sono riportati gli smorzamenti relativi ai primi due modipropri di vibrare del sistema, e possibile osservare che in corrispondenza dellavelocita di flutter, lo smorzamento del secondo modo proprio diventa positivo.La particolarita rispetto al caso proposto nel paragrafo 2.7.1 e che il gradientedi ⌘
2
e molto elevato, ed e rappresentativo di un flutter di tipo esplosivo.
Figura 2.11: frequenze naturali al variare della velocita (T = 6, stazionario).
Figura 2.12: smorzamenti al variare della velocita (T = 6, stazionario).
40 2 L’instabilita dinamica (flutter supersonico) di un pannello
2.7.4 Modello instazionario, T = 6
Per quanto riguarda le frequenze, vale quanto detto nel paragrafo pre-cente. Per quanto riguarda gli smorzamenti, essendo un modello instazionario,le forze aerodinamiche hanno un e↵etto smorzante alle basse velocita. Inprossimita della velocita di flutter, l’andamento degli smorzamenti cambia,ed in particolare quello relativo al secondo modo proprio di vibrare diven-ta molto rapidamente positivo, e data l’elevata pendenza della curva si puoparlare ancora di flutter esplosivo.
Figura 2.13: frequenze naturali al variare della velocita (T = 6, instazionario).
Figura 2.14: smorzamenti al variare della velocita (T = 6, instazionario).
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
1
Studio Aeroelastico Dinamico di un Profilo
Indice
1. INTRODUZIONE .................................................................................................... 2!1.1 Equazioni del Moto ..................................................................................................... 2!1.2 Adimensionalizzazione ................................................................................................ 4!
2. OPERATORE STRUTTURALE ............................................................................. 6!2.1 Analisi delle Autosoluzioni ......................................................................................... 6!2.2 Risposta Forzata ........................................................................................................ 10!
3. OPERATORE AERODINAMICO 2D, INCOMPRIMIBILE, INSTAZIONARIO12!3.1 Operatore Aerodinamico Instazionario Completo ..................................................... 12!3.2 Operatori Aerodinamici Quasi-Stazionari ................................................................. 14!
4. CONDIZIONI D’INSTABILITÀ (FLUTTER) ..................................................... 16!4.1 Il Ruolo della Fase in un Sistema Monodimensionale .............................................. 16!4.2 Il Ruolo della Fase in un Sistema Bidimensionale .................................................... 17!4.3 Modello di PINE per il Flutter .................................................................................... 19!4.4 Ricerca del Flutter ..................................................................................................... 20!
4.4.1 Metodo Vg ....................................................................................................................... 20!4.4.3 Metodo p-k ...................................................................................................................... 21!
APPENDICI ............................................................................................................... 22!A. Funzione di Theodorsen ...................................................................................................... 23!B. Grafico dei Coefficienti Aerodinamici Instazionari Bidimensionali Incomprimibili .......... 24!C. Funzione di Sears ................................................................................................................ 28!D. Riepilogo delle Equazioni del Flutter in Forma Quasi-Stazionaria ................................... 29!E. Riepilogo delle Equazioni del Flutter in Forma Completa ................................................. 29!
2
1. Introduzione
In queste note s’imposterà l’analisi di uno dei più semplici sistemi aeroelastici, in cui vi la possibilità di un’instabilità dinamica.
1.1 Equazioni del Moto
Consideriamo un’ala infinitamente lunga, in cui le uniche rigidezze siano quelle flessionale (nel piano xz) e torsionale (intorno all’asse y). Tali rigidezze siano rappresentate da elementi noti e concentrati nell’asse elastico, e denotate dai simboli kh e kα, rispettivamente.
Fig.1: Schema del Profilo e dei Centri Caratteristici
ACAE
CM
x,r
z,w
bb
O
ba h bxα
generica configurazione deformata all’istante t
configurazione di equilibrio iniziale
α(t)
h(t)
U∞
Ricordiamo che se denominiamo u, v, e w gli spostamenti dei punti dell’ala in un
riferimento Oxyz, dovremo essere capaci di ottenere la seguente relazione:
3
)q,,q,q,z,y,x(w)t,z,y,x(w)q,,q,q,z,y,x(v)t,z,y,x(v)q,,q,q,z,y,x(u)t,z,y,x(u
N21
N21
N21
…
…
…
=
=
=
. (1)
dove con N)i(con qi ∈ si è indicata l’i-ma coordinata generalizzata. Il generico spostamento secondo l’asse z, nel caso d’ala infinitamente lunga, sarà quindi
esprimibile secondo le uniche due incognite cinematiche:
))t(tan(r)t(h)t,x(w α−−= . (2)
L’ultima relazione, nel caso di piccoli disturbi (ovvero piccoli spostamenti e angoli d’attacco) diverrà:
)t(r)t(h)t,x(w0)t,x(v0)t,x(u
α−−=
=
=
. (3)
Per completezza si è riscritto l’insieme completo degli spostamenti alari. Lo spostamento flessionale h, è stato assunto positivo verso il basso, mentre la torsione α, positiva oraria. Una possibile scelta (tra le infinite) delle coordinate generalizzate o lagrangiane è data proprio da h ed α. Scriviamo le energia potenziale e cinetica del sistema in esame:
22h )t(k
21)t(hk
21)t(U α+= α , (4)
[ ]∫∫−−
α+==b
b
2b
b
2 dm)t(r)t(h21
dm)t,x(w21
)t(T . (5)
In particolare, essendo il sistema a massa omogenea, si ha:
[ ] [ ]
[ ] [ ] [ ]
.S)t(h)t(dm)t(h)t(r
;)t(I21dmr)t(
21dm)t(r
21
;)t(hm21dm)t(h
21
b
b
2b
b
22b
b
2
2b
b
2
α
−
α
−−
−
α=α
α=α=α
=
∫
∫∫
∫
(6)
dove Iα è il momento d’inerzia di massa del segmento alare intorno all’asse elastico, e Sα è il
momento statico del segmento alare rispetto all’asse elastico. Si ricordi che essendo m la massa del segmento alare:
mbS
xbmxS αααα =⇒= , (7)
e quindi xα (positivo per centro di massa dietro all’asse elastico) è la distanza in semicorde tra centro di massa ed asse elastico.
Applicando le equazioni di LAGRANGE1, otterremo le volute equazioni del moto, per le due coordinate generalizzate h ed α:
1 Le equazioni di LAGRANGE per un insieme di N coordinate generalizzate, si esprimono come segue:
4
!"#
$%&
=!"#
$%&
α()
*+,
-+
!"#
$%&
α()
*+,
-
αααα
α
)t(Q)t(Q
)t()t(h
k00k
)t()t(h
ISSm hh
. (8)
Per brevità di scrittura, salvo dove strettamente necessario, si ometterà d’ora in poi di indicare la dipendenza temporale. Notiamo che le matrici dei coefficienti non sono consistenti come dimensioni2, infatti:
[m]=[ML-1], [Sα]=[M], [Iα]=[ML], [h]=[L], [kh]=[FL-2], [kα]=[F], [Qh]=[FL-1], [Qα]=[F].
1.2 Adimensionalizzazione
Prima di esplicitare gli operatori aerodinamici e di disturbo, conviene passare ad una opportuna adimensionalizzazione delle eq.(9). E’ ora conveniente esprimere le rigidezze mediante le pulsazioni naturali del sistema strutturale disaccoppiato (Sα=0):
α
αα =ω=ω
Ik
;mk 2h2
h . (9)
A questo punto dividendo la prima delle eq.(8) per il termine πρb2b e la seconda per πρb2b2, si otterrà:
!!"
!!#
$
!!%
!!&
'
πρ
πρ=!"
!#$
!%
!&'
α++++
,
-
.
.
.
.
/
0
πρ
ωπρ
ω
+!"
!#$
!%
!&'
α++++
,
-
.
.
.
.
/
0
πρπρ
πρπρααααα
α
4
3h
4
2
2
2h
43
32
bQbQ
bh
bI0
0b
m
bh
bI
bS
bS
bm
. (10)
Le coordinate generalizzate sono ora entrambe adimensionali così come i coefficienti delle matrici e le forze generalizzate. Introduciamo i gruppi adimensionali:
222
4
22
4
332
mbI
r ;rbrmb
bI
xbmbx
bS
b
m
ααα
αα
ααα
=µ=πρ
=πρ
µ=πρ
=πρ
µ=πρ
. (11)
Si noti che: ρ è la densità del fluido alla quota considerata ed è [ρ]=[ML-3]; rα è il raggio d’inerzia della sezione alare misurata in semicorde; µ è il rapporto di massa della sezione alare. Si può allora riscrivere l’intero sistema come segue:
!!"
!!#
$
!!%
!!&
'
πρ
πρ=!"
!#$
!%
!&'
α+,
-./
0
ω
ωµ+
!"
!#$
!%
!&'
α+,
-./
0µ
ααααα
α
4
3h
22
2h
2
bQbQ
bh
r00
bh
rxx1
. (12)
Imponiamo che la forma temporale delle soluzioni e dei termini noti siano assegnati:
{ }N2,1icon qW
qU
qT
t iii
…
∈∂
∂=
∂
∂+##$
%&&'
(
∂
∂
∂
∂
2 Ciò può non essere un problema sostanziale, ma lo è sicuramente dal punto di vista formale. Inoltre, l’utilità dei termini matriciali è proprio quella di poter comparare tra loro i singoli coefficienti, cosa che è possibile solo se essi vengono resi tutti omogenei.
5
pt0
pt0
pt0hh
pt0
eQ)t(Qe)t(eQ)t(Qeh)t(h
αα =α=α
==, (13)
con p∈C e [p]=[T-1]. In tal modo si avrà la forma definitiva delle equazioni del moto per il problema in esame:
!!"
!!#
$
!!%
!!&
'
πρ
πρ=!"
!#$
!%
!&'
α++,
-../
012
345
6
ω
ωµ+1
2
345
6µ
ααααα
α
40
30h
0
0
22
2h
22
bQb
Q
bh
r00
rxx1
p . (14)
6
2. Operatore Strutturale
2.1 Analisi delle Autosoluzioni
L’operatore strutturale bidimensionale in oggetto è molto semplice e permette delle facili considerazioni. Consideriamo l’eq. omogenea associata al problema completo retto dall’eq.(15):
!"#
$%&
='!
'"#
'$
'%&
α))*
+,,-
./0
123
4
ω
ωµ+/
0
123
4µ
αααα
α
00
bh
r00
rxx1
p0
0
22
2h
22 . (15)
Per l’assenza di termini dissipativi di qualsiasi natura, le autosoluzioni non potranno che essere che di tipo armonico, tali quindi da verificare p=jω. Le soluzioni esisteranno, com’è ben noto, se e solo se il determinante della matrice dei coefficienti è nullo:
0r00
rxx1
22
2h
22 =!
"
#$%
&
ω
ωµ+!
"
#$%
&µω−
αααα
α . (16)
Risolvendo l’equazione secolare (biquadratica), le soluzioni (in termini di ω2) sono le seguenti:
!"
#$%
&−
!"
#$%
&−((
)
*++,
-
ω
ω−
!!"
#
$$%
&(()
*++,
-
ω
ω+±((
)
*++,
-
ω
ω+
=ω
ω
α
α
α
αααα
2
2
2
2
2h
22
2h
2
2h
2
2h
22,1
rx
12
rx
1411
. (17)
L’annullarsi del momento statico (xα=0), il braccio sussistente tra centro di massa ed asse elastico (centro di rotazione della sezione considerata), disaccoppia completamente i due gradi di libertà strutturali, come d’altronde era già ovvio dato che xα compare solo nei termini fuori della diagonale della matrice di massa; le forze non producono alcuna rotazione elastica e viceversa, i momenti non provocano flessione. Le pulsazioni naturali sono allora date da:
!"
!#$
ω
ω=&&'
(
))*
+,,-
.//0
1
ω
ω−±,,
-
.//0
1
ω
ω+
=ω
ωα
αα
=α2h
2
2
2h
2
2h
2
0x
2h
22,1
1
2
11
. (18)
7
Per la ricerca degli autovalori, indeterminati a meno di una costante, si utilizza la prima delle eq.(16) da cui )/1)(x/1(h/b 22
h00 ωω−−=α α ; imponendo arbitrariamente che i due autovettori abbiano h0/b=1 si ha che:
!!
"
#
$$
%
&
''(
)**+
,
ω
ω−−''
(
)**+
,
ω
ω−−=Φ
αα22
2h
21
2h 1
x1
1x1
11. (19)
E’ facile altresì dimostrare che: !"
#$%
&=Φ
=α 1001
0x . Il seguente foglio Mathcad riporta un
grafico dell’eq.(18), in altre parole le pulsazioni naturali strutturali accoppiate, in forma
adimensionale. E’ stato posto, per brevità di scrittura: ξ=≡ζ≡ω
ω
α
αα
rx
;h
.
8
Studio delle Autosoluzioni Strutturali
s 1( ),ζ ξ1 ζ2 1 ζ2
2..4 ζ2 1 ξ2
.1 ξ2 2
ζ ..,0.11 0.15 9 s 2( ),ζ ξ1 ζ2 1 ζ2
2..4 ζ2 1 ξ2
.1 ξ2 2
0.1 1 100.01
0.1
1
10
100
s 1( ),ζ 0.3
s 2( ),ζ 0.3
ζ
0.1 1 100.01
0.1
1
10
100
s 1( ),ζ 0
s 2( ),ζ 0
ζ
ξ ..,0.5 0.45 0.5
0.5 0 0.50.6
0.7
0.8
0.9
1
s 2( ),1 ξ
s 2( ),3 ξ
ξ
0.5 0 0.50
5
10
15
s 1( ),1 ξ
s 1( ),3 ξ
ξ
Utilizziamo ora Mathcad per la ricerca delle autosoluzioni strutturali.
9
Studio dell'Operatore Strutturale OmogeneoORIGIN 1
µ 40 x α 0.2 r α 0.6222ωn .0
radsec
ω h .10radsec
ω α.100radsec
Matrice di Massa Matrice di Rigidezza
M1
x α
x α
r α2 K
ω h2
ωn2
ωn2
.r α2 ω α
2
D .M 1 K
eig eigenvals( )D
i ..1 2< >Φ i eigenvec ,D eigi
=eig9.93
107.628sec 2 =Φ
0.999
0.035
0.215
0.977
Matrice di Massa Generalizzata Matrice di Rigidezza Generalizzata
=..TΦ M Φ1.014
0
0
0.556=..TΦ K Φ
10.065
0
0
59.799sec 2
10
2.2 Risposta Forzata
Risposta Forzata Diretta dell'Operatore Strutturale Smorzato ORIGIN 1
µ 40 x α 0.2 r α 0.6222 ωn .0radsec
j 1
ω h .10radsec
ω α.100radsec ρ .1.225
kg
m3η 0.01
b .0.75 m
Matrice di Massa Matrice di RigidezzaF .1
newtonm Mo ..F 0.5 m
M1
x α
x α
r α2 K
ω h2
ωn2
ωn2
.r α2 ω α
2T1
F
..π ρ b3T2
Mo
..π ρ b4
Dyn( )ω ..ω2 µ M ..µ K ( )1 .j ηω ..,
ω h8
ω h7
.ω α 2res( )ω .Dyn( )ω ( )1 T
0 0.5 1 1.5 21 10 6
1 10 5
1 10 4
0.001
0.01
0.1
1Coordinate Fisiche Adimensionali
res( )ω 1
res( )ω 2
ω
ω α
11
Risposta Forzata Modale dell'Operatore Strutturale Smorzato ORIGIN 1
µ 40 x α 0.2 r α 0.6222 b .0.75 m ωn .0radsec
ρ .1.225kg
m3ω h .10radsec
ω α.100radsec
j 1
Matrice di Massa Matrice di RigidezzaF .1newton
mMo ..F 0.5 m
M1
x α
x α
r α2 K
ω h2
ωn2
ωn2
.r α2 ω α
2T1F
..π ρ b3T2
Mo
..π ρ b4
D .M 1 K eig eigenvals( )D < >Φ 1 eigenvec ,D eig1< >Φ 2 eigenvec ,D eig2
η 0.01Matrice delle Forze Generalizzate
Matrice di Massa GeneralizzataF g .TΦ T
M g ..TΦ M Φ
Matrice di Rigidezza Complessa Generalizzata K g ...TΦ ( )1 .j η K Φ
x( ),k ω
F gk
.M g ,k kω2 K g ,k k
ω ..,ω h8
ω h7
.ω α 2
0 0.5 1 1.5 20.001
0.01
0.1
1
10Coordinate Modali
x( ),1 ω
x( ),2 ω
ω
ω α
12
3. Operatore Aerodinamico 2D, Incomprimibile, Instazionario
3.1 Operatore Aerodinamico Instazionario Completo Si devono esprimere le forze aerodinamiche (la portanza ed il momento) agenti sul sistema
in esame. Si formulerà la classica ipotesi di regime incomprimibile in modo da utilizzare la rappresentazione di THEODORSEN, attraverso la sua funzione C(k). La frequenza ridotta è stata indicata come sempre con k,
Ubk ω
= . (20)
Per il sistema in esame, le forze siano considerate positive se verso l’alto e i momenti positivi se antiorari. Al secondo membro delle equazioni del moto si ha, quindi:
!!"
!!#
$
!!%
!!&
'
πρ
πρ
−
≡
!!"
!!#
$
!!%
!!&
'
πρ
πρα
4
3
40
30h
bMbL
bQb
Q
. (21)
Il momento è valutato intorno all’asse elastico:
( )baLMMM h21
ACAE ++=≡ . (22)
Separiamo per entrambe le caratteristiche aerodinamiche, i due contributi dovuti al campo circolatorio e a quello a circolazione nulla:
)C()NC()C()NC( MMM ;LLL +=+= . (23)
In particolare, le forze ed i momenti assumeranno le seguenti espressioni:
( ) ( ) ]bahU)[k(UbC2L ;bahUbL h21)C(
h2)NC( α−++απρ=α−+απρ= ; (24)
( )
( ) ( )[ ]α−++α+πρ=
%&
'()
* α−α−α−+απρ=
bahU)k(CaUb2M8
bUbbahUbabM
h21
h212)C(
221
hh2)NC(
. (25)
Si noti che riscrivendo opportunamente le espressioni precedenti, si possono separare i contributi dovuti alla flessione ed alla torsione, nelle componenti di massa, rigidezza e smorzamento aerodinamici. Facciamolo solo per la portanza:
13
( )h)]k(UbC2[h]b[]U)k(UbC2[
)]k(UbC2ba[]Ub[]bba[L2
h2122
h
πρ+πρ+απρ
+απρ−+απρ+απρ−=. (26)
L’espressione precedente può facilmente essere utilizzata per estrarre i coefficienti aerodinamici quali hlhllhlll c,c,c,c,c,c ααα .In tal modo alcuni autori preferiscono esprimere le cosiddette derivative di flutter, ossia i coefficienti aerodinamici instazionari. Si noti inoltre che per ah=-1/2 (l’oscillazione avviene intorno al fuoco aerodinamico), si annulla la parte circolatoria del momento; ciò significa che la portanza (per la sua parte circolatoria) è situata effettivamente ad un quarto della corda del profilo (centro aerodinamico, il luogo nel quale il momento aerodinamico non cambia al variare dell’angolo d’attacco).
E’ il caso di riportare l’espressione della funzione C(k) e gli andamenti della parte reale e della parte immaginaria, ricordando che:
[ ] 1)2(0
)2(1
)2(1 )k(jH)k(H)k(H)k(jG)k(F)k(C
−+=+≡ .
In appendice è riportata la classica rappresentazione, come parti reale ed immaginaria in funzione della frequenza ridotta.
Imponiamo che la forma temporale delle coordinate generalizzate sia questa volta: tj
0tj
0 e)t(eh)t(h ωω α=α= , (27)
così da ottenere:
!!"
!!#
$
!!%
!!&
'
()
*+,
-α/
0
123
4 −++α
+()
*+,
- α+−α
ω=πρ
0hh0
02
0h0
02
3
akja
21
k1
bhj
k1)k(C2
abh
kj
bL
; (28)
!!
"
!!
#
$
!!
%
!!
&
'
()
*+,
- α/0
123
4 −++α
/0
123
4 +
+()
*+,
- α+
α−α+−
α
ω=πρ
kj
a21
kj
bh
ka
21)k(C2
8k2ja
bha
kja
bM
0h
020
h
000
2h
0h
0h
24 ; (29)
e quindi:
!"
!#$
!%
!&'
α)*
+,-
.)*
+,-
./0
123
4 −++++−ω=πρ
0
0
hh2h2
3 bh
akja
21
k1)k(C2a
kj
k1)k(C21
bL
; (30)
!"
!#$
!%
!&'
α))))
*
+
,,,,
-
.
)*
+,-
./0
123
4 −+/0
123
4 +
++−+
/0
123
4 ++−ω=πρ
0
0
h2h
2hh
hh2
4 bh
kja
21
k1a
21)k(C2
81
k2ja
kja
kja
21)k(C2a
bM
; (31)
In termini matriciali:
14
!"
!#$
!%
!&'
α)*
+,-
.ω=
!!"
!!#
$
!!%
!!&
'
πρ
πρ
α
α
0
0
mmh
llh2
4
3
bh
CCCC
bMbL
. (32)
3.2 Operatori Aerodinamici Quasi-Stazionari Gli operatori aerodinamici cosiddetti quasi-stazionari, sono esprimibili semplicemente
considerando quelli circolatori, in cui la funzione C(k) sia posta pari ad un valore unitario reale:
!"
#$%
&α()
*+,
- −++απρ= ba21hUUb2L h
)QS( ; (33)
!"
#$%
&α()
*+,
- −++α()
*+,
- +πρ= ba21hUa
21Ub2M hh
2)QS( . (34)
Notiamo che le approssimazioni quasi-stazionarie hanno un ordine d’importanza relativa:
!!!
"
#
$$$
%
&
α()
*+,
- −++απρ=
−
−
oIIStazionariQuasi
hoIStazionariQuasioStazionari
)QS( ba21
hUUb2L , ed analogamente per il momento.
E’ facile a questo punto costruire una tabella di tali coefficienti: L(QS) M(QS)
h - - h Ub2πρ ( )h2
12 aUb2 +πρ
h - - α bU2 2πρ ( )h2
122 abU2 +πρ α ( )[ ]h2
12 aUb2 −πρ ( )2h413 aUb2 −πρ
α - - In termini matriciali, e consistentemente con quanto fatto in precedenza, avremo:
[ ]
[ ]( )
( ) ( ) ( )!!!!
"
#
$$$$
%
&
!"
#$%
& −+++
−+=
()
(*+
(,
(-.
αω=
(()
((*
+
((,
((-
.
πρ
πρ
kja
k1a21
kja2
kja21
k2
kj2
A
bh
A
bMb
L
h21
2hh21
h2(QS)
0
0(QS)2
4
)QS(
3
)QS(
. (35)
Cerchiamo di capire la congruenza formale e dimensionale con le relazioni ben note dell’aerodinamica stazionaria. La portanza stazionaria per unità d’apertura è espressa come segue:
αρ=αρ=αρ= ααα l2
l2
l2)S( bcVc)b2(V
21c)c(V
21L . (36)
Considerando nel nostro caso, la portanza legata al solo angolo d’attacco:
15
απρ=απρ=αωπρ= 222
322
3)QS( bV2Vb2b
k2bL , (37)
Ricordando che il profilo, per le ipotesi fatte, è una lastra piana( π=α 2cl ), si avrà pertanto:
)QS(2l
2)S( LbV2bcVL =απρ=αρ= α , (38)
come ci si aspettava. I coefficienti aerodinamici instazionari e quasi-stazionari, resi correttamente dimensionali,
sono utilizzabili analogamente a quanto fatto nel caso stazionario. In appendice C sono riportati i grafici di tali coefficienti secondo dei fogli Mathcad.
16
4. Condizioni d’Instabilità (Flutter)
4.1 Il Ruolo della Fase in un Sistema Monodimensionale
C’è un modo molto semplice per identificare ed inquadrare il fenomeno del flutter bidimensionale. Supponiamo, infatti, che il profilo sia rappresentato da una lastra piana ad angolo d’attacco nullo e che l’unico modo sia rappresentato da una flessione intorno all’asse elastico:
{ })tjexp(hRe)t(h 0 ω= . (39)
Inoltre, consideriamo la generazione di forze aerodinamiche instazionarie, nella forma più semplificata possibile, in altre parole consideriamo la variazione d’angolo d’attacco come dovuta al solo modo elastico considerato:
{ })tjexp(jhReU1
dt)t(dh
U1)t( 0 ωω==α
∞∞
. (40)
L’unico lavoro aeroelastico presente nel sistema sarà dato da:
{ } tddt)t(dhRe)t(LRe
T1dt
dtdhLdhLd
2T
0hhh ∫
ω
π=
$%&
'()−=Π⇒−=−=Π . (41)
È stata considerata come unica forza aerodinamica, la portanza. Possiamo esprimerla come rapporto, r, della portanza istantanea rispetto al quella che si otterrebbe per un moto del profilo a velocità costante, 0hh = ; inoltre si deve tenere presente che l’aerodinamica introduce uno smorzamento e ci sarà quindi un ritardo (o un anticipo) nella portanza prodotta dalla data variazione d’angolo d’attacco:
!!"
#$$%
&ρ=ψ=
∞α∞ Uh
ScU21)t(L),jexp(r)t(L)t(L 0
l2
00h
. (42)
Pertanto, risolvendo l’integrale si avrà:
ψωρπ
−=Π α∞ cosrhScU2
20l . (43)
Il segno del lavoro ci dice se l’oscillazione estrae energia dal fluido o viceversa: affinché si manifesti il flutter è necessario che sia Π>0. I valori di r e ψ sono, in generale, funzioni di REYNOLDS e MACH.
17
La funzione riportata nel grafico seguente è esprimibile grazie alle relazioni precedentemente introdotte. Si tratta, infatti, in questo caso, di esprimere solo i contributi dovuti alla flessione:
jk)k(C2k
bhbU
L 2
02+−=
πρ; jk2
bhbU
L02
)QS(
=πρ
(44)
)k(jG)k(F2jk
)k(C2jk
)jexp(rLL
)k( )QS( ++=+=ψ≡=γ ; (45)
I raggi uscenti dall’origine del sistema di riferimento definiranno in modo univoco r e ψ. Si noti che per k=0, il valore di r è unitario mentre ψ è nullo.
Fig. 2: Andamento della Funzione γ(k) sugli assi Reale ed Immaginario
0 0.5 1 1.5 2 2
1
0
1
2
Im γ kk i ( ) ( ) ( )
Re γ kk i ( ) ( ) ( )
r ψ
4.2 Il Ruolo della Fase in un Sistema Bidimensionale
Atteso dal paragrafo precedente che non vi può essere un’instabilità monodimensionale per configurazioni in cui la derivata del coefficiente di portanza è positiva, esaminiamo in cui i gradi di libertà siano due. Abbiamo le deformate di flessione e torsione del profilo alla stessa frequenza d’oscillazione: si può dimostrare che questa è condizione necessaria per l’esistenza del flutter. Il lavoro che occorre considerare è quello della portanza:
∫∫ω
π=
ω
π=
α +=Π
2T
0h
2T
0
dthLdthL . (46)
Gli altri contributi della portanza sono trascurabili. Si noti che il secondo integrale nell’espressione del lavoro è sempre negativo (cfr. paragrafo precedente).
Il primo termine è nullo se h ed α sono in fase, ed è maggiore di 0 se h ed α hanno una fase di π/2. Ciò significa che solo se i due modi del profilo sono sfasati di un dato angolo sussisterà la
18
possibilità dell’insorgere del flutter. Le figure seguenti riportano in modo semplificato lo schema fisico.
Fig. 3: Fase Nulla.
)t(sin),t(sinh ω=αω=
tω
Portanza
Velocità Profilo (Lastra Piana)
0 π/4 π/2 3π/4 π 5π/4 3π/2 7π/4 2π
Fig. 4: Fase di π/2.
)t(sin),tcos(h ω=αω=
tω
Portanza
Velocità Profilo (Lastra Piana)
0 π/4 π/2 3π/4 π 5π/4 3π/2 7π/4 2π
È inevitabile che, anche in presenza di smorzamento strutturale, l’unico operatore che potrà introdurre una fase variabile tra i modi del profilo è quello aerodinamico: tale sfasamento sarà funzione della frequenza ridotta e quindi della velocità di volo.
19
4.3 Modello di PINE per il Flutter
Rinunciamo all’approccio dimensionale per seguire l’impostazione formale di Pine. In questo caso si considera come unico operatore aerodinamico, la portanza stazionaria:
!"#
$%&
='(
)*+
, −−
!"#
$%&
α'(
)*+
,+
!"#
$%&
α'(
)*+
,
α
α
ααα
α
00
Sebcl20Scl0
q)t()t(h
k00k
)t()t(h
ISSm h
, (47)
dove il simbolo q denota la pressione dinamica per unità di apertura, [FL-3]. Quindi:
!"#
$%&
=!"#
$%&
α()
*+,
-
−+
++
αααα
αα
00h
qSebcl2kpIpSqSclpSkmp
22
2h
2
, (48)
per ottenere l’equazione secolare:
=
=
=
=++
0
2
4
02
24
4
aaacon
0apapa
. (49)
Discutiamo le possibili radici in base al segno dei coefficienti: a4 >0 Δ >0 <0 a0 >0 <0 a2 >0 <0 Soluzioni pI,1 = +jω1
pI,2 = -jω1
pI,2 = +jω2
pI,2 = -jω2
pI,1 = +σ1 pI,2 = -σ1
pI,2 = +σ2
pI,2 = -σ2
pI,1 = +jσ pI,2 = -jσ
pI,2 = +jω
pI,2 = -jω
pI,1 = +jω1 pI,2 = -jω1
pI,2 = +jω2
pI,2 = -jω2 Tipo di Moto Armonico Aperiodico Aperiodico
Armonico Oscillatorio
Tipo di Stabilità Neutrale Divergenza Divergenza Controlla la tabella sulla divergenza
20
4.4 Ricerca del Flutter
4.4.1 Metodo Vg
Riscriviamo l’intero problema in forma compatta e simbolica:
[ ]{ } [ ]{ } [ ]{ }
[ ] [ ][ ]{ } [ ] [ ][ ]{ } [ ] [ ][ ]{ }
[ ] [ ][ ] [ ]R)k,M(
)k,M(UKM
q)k,M(UqKqM
T
TTT
=
=+−
=+−
ΨΨ
ζΨΨρζΨΨζΨΨω
ρω
A
A21
A21
22
22
, (50)
e poi moltiplichiamo per l’inversa della matrice di rigidezza:
[ ] [ ]{ } [ ]{ } [ ]{ } { }⇒="#
$%&
' ρ−++ω−− 0q)k,M(U21qK)jg1(qMK 221 A
[ ] [ ]{ } [ ] { } { }qjg1qk
)k,M(Kb21qMK 22
121
ω
+="#
$%&
'ρ− −− A;
si ottiene il problema agli autovalori che cercavamo:
[ ]{ } { }
[ ]{ } { } { }0qq)k,M(D
qjg1q)k,M(D 2
=λ−⇒ω+
=. (51)
Nel nostro caso specifico avremo:
!"
!#$
!%
!&'
α!!"
!!#
$
!!%
!!&
'
πρ
πρ−
=!"
!#$
!%
!&'
α,,-
.//0
123
456
7
ω
ω+µ+2
3
456
7µω−
αααα
α
0
0
4
2
0
0
22
2h
22
bh
bMbL
bh
r00
)jg1(rxx1
; (52)
!"#
$%&
='!
'"#
'$
'%&
α''!
''"
#
''$
''%
&
πρ−πρ
,-
./0
1
ω
ω+
'!
'"#
'$
'%&
α33
4
5
66
7
8,-
./0
1
ω
ω,-
./0
1
ω
ω+µ+,
-
./0
1,-
./0
1
ω
ωµω−
−
αα
αα
−
αααα
α
−
αα
00
bh
bMbL
r00
bh
r00
r00
)jg1(rxx1
r00
0
0
4
21
22
2h
0
0
22
2h
1
22
2h
2
1
22
2h2
; (53)
21
!"
!#$
!%
!&'
αω+
=!"
!#$
!%
!&'
α****
+
,
----
.
/
!!"
!!#
$
!!%
!!&
'
πρ−πρ
34
567
8
ω
ω**+
,--.
/
µω−
+34
567
834
567
8
ω
ω−
αααα
α
−
αα 0
0
2
0
0
4
21
22
2h
22
1
22
2h
bh)jg1(
bh
bMbL
r001
rxx1
r00
; (54)
!"
!#$
!%
!&'
αω+
=!"
!#$
!%
!&'
α******
+
,
------
.
/
01
234
5
−−01
234
5
ω
ω**+
,--.
/µω−
+01
234
501
234
5
ω
ω
α
α
−
αα
αα
α
−
αα
0
0
2
0
0
mmh
llh
1
22
2h
2
2
1
22
2h
bh)jg1(
bh
CCCC
r001
rxx1
r00
; (55)
4.4.3 Metodo p-k
Riscriviamo l’intero problema in forma compatta e simbolica adottando l’ipotesi che la soluzione temporale sia q=q0ept, con p=σ+jω:
[ ] [ ]( ){ } [ ]{ }020
2 q)k,M(AU21qKMp ρ=+ (56)
Notiamo che possiamo anche scrivere introducendo lo smorzamento γ e la frequenza ridotta k:
( )jkkbUk
bUj
bkU
bkjU
bkUp +γ=+"
#
$%&
'γ=+"#
$%&
'ωσ
=
Nel nostro caso specifico avremo:
0)k(C)k(C)k(C)k(C
rprxxp
bh
)k(C)k(C)k(C)k(C
bh
rprxxp
mmh
llh22222
2h
2
0
0
mmh
llh2
0
0
2222
2h
2
=!"
#$%
&ω−!
"
#$%
&
ω+
ω+⇒
*+
*,-
*.
*/0
α!"
#$%
&ω=
*+
*,-
*.
*/0
α!"
#$%
&
ω+
ω+µ
α
α
αααα
α
α
α
αααα
α
; (57)
0)k(C)k(C)k(C)k(C
rprxxp
mmh
llh22222
2h
2
=!"
#$%
&ω−!
"
#$%
&
ω+
ω+⇒
α
α
αααα
α ; (58)
22
Appendici
23
A. Funzione di Theodorsen
Funzioni di Hankel del Secondo Tipoj 1
H( ),n k Jn( ),n k .j Yn( ),n k Funzione di Theodorsen
H0( )k J0( )k .j Y0( )k C( )kH( ),1 k
H( ),1 k .j H0( )k
F( )k Re( )C( )k G( )k Im( )C( )ki ..1 50 ki 10
i10
1.1
0.4 0.5 0.6 0.7 0.8 0.9 10.2
0.15
0.1
0.05
0
G ki
F ki
0.001 0.01 0.1 1 100.5
0.6
0.7
0.8
0.9
1
F ki
ki
0.001 0.01 0.1 1 100.2
0.1
0
G ki
ki
24
B. Grafico dei Coefficienti Aerodinamici Instazionari Bidimensionali Incomprimibili
Coefficienti Aerodinamici Instazionari 2D in Regime Incomprimibile: Portanzaj 1
H1( )k J1( )k .j Y1( )k H0( )k J0( )k .j Y0( )k
C( )kH1( )k
H1( )k .H0( )k jDistanza dell'asse elastico dall'origine del sistema di riferimento in semicorde: . . . ah.
C Lα ,k a h .k2 a h .j k ..2 C( )k 1 ..12
a h j k C Lh ,k a h k2 ...2 C( )k j k
i ..,1. 1.15 4 k( )i 10 i 1.4
0.01 0.1 1 10
0
2
4Re C Lα( ),k( )i 0.5
Im C Lα( ),k( )i 0.5
Re C Lα( ),k( )i 0.2
Im C Lα( ),k( )i 0.2
k( )i
0.01 0.1 1 106
4
2
0
2
Re C Lh( ),k( )i 0.5
Im C Lh( ),k( )i 0.5
Re C Lh( ),k( )i 0.2
Im C Lh( ),k( )i 0.2
k( )i
25
Coefficienti Aerodinamici Instazionari 2D in Regime Incomprimibile: Momentoj 1
H1( )k J1( )k .j Y1( )k H0( )k J0( )k .j Y0( )k
C( )kH1( )k
H1( )k .H0( )k jDistanza dell'asse elastico dall'origine del sistema di riferimento in semicorde: . . . ah.
C Mα ,k a h .18
k2 .k2 a h2 ..1
2a h j k ...2 C( )k
12
a h 1 ..12
a h j k
C Mh ,k a h ....2 C( )k12
a h j k .k2 a h
i ..,1. 1.15 4 k( )i 10 i 1.4
0.01 0.1 1 10
2
0
2
Re C Mα( ),k( )i 0.5
Im C Mα( ),k( )i 0.5
Re C Mα( ),k( )i 0.2
Im C Mα( ),k( )i 0.2
k( )i
0.01 0.1 1 101
0
1
2
3
Re C Mh( ),k( )i 0.5
Im C Mh( ),k( )i 0.5
Re C Mh( ),k( )i 0.2
Im C Mh( ),k( )i 0.2
k( )i
26
Coefficienti Aerodinamici Quasi-Stazionari 2D in Regime Incomprimibile: Momento
i ..,1. 1.15 4Distanza dell'asse elastico dall'origine del sistema di riferimento in semicorde: . . . ah.
j 1k( )i 10 i 1.4
C Mα ,k a h ..21
2a h 1 ..1
2a h j k C Mh ,k a h ...2
1
2a h j k
0.01 0.1 1 10
0.5
1
1.5
Re C Mα( ),k( )i 0.2
Im C Mα( ),k( )i 0.2
k( )i
0.01 0.1 1 10
1
2
3
Im C Mh( ),k( )i 0.2
k( )i
27
Coefficienti Aerodinamici Quasi-Stazionari 2D in Regime Incomprimibile: Portanza
i ..,1. 1.15 4Distanza dell'asse elastico dall'origine del sistema di riferimento in semicorde: . . . ah.
j 1k( )i 10 i 1.4
C Lh ,k a h..2 j kC Lα ,k a h
.2 1 ..12
a h j k
0.01 0.1 1 10
2
4
5.02377
0.00150713
Re C Lα( ),k( )i 0.5
Im C Lα( ),k( )i 0.5
Re C Lα( ),k( )i 0.2
Im C Lα( ),k( )i 0.2
2.511890.01 k( )i
0.01 0.1 1 10
2
4
Im C Lh( ),k( )i 0.5
Im C Lh( ),k( )i 0.2
k( )i
28
C. Funzione di Sears
j 1−:= H0 k( ) J0 k( ) j Y0 k( )⋅−:= H1 k( ) J1 k( ) j Y1 k( )⋅−:=
C k( )H1 k( )
H1 k( ) j H0 k( )⋅+:= φ k( ) J0 k( ) j J1 k( )⋅−( ) C k( )⋅ j J1 k( )⋅+:=
k 0.01 0.02, 10..:=
0.4 0.2 0 0.2 0.4 0.6 0.8
0.2
0.1
0
0.1
0.2
Funzione di Sears
Im φ k( )( )
Re φ k( )( )
29
D. Riepilogo delle Equazioni del Flutter in Forma Quasi-Stazionaria
µ ωh2 −ω2( ) −µx
αω2
−µxαω2 µr
α2 ω
α2 −ω2( )
$
%
&&&
'
(
)))
h0bα0
*
+,
-,
.
/,
0,+
+ω2
2 jk
2 1k 2+12− ah
1
23
4
56jk
$
%&
'
()
2 12+ ah
1
23
4
56jk
2 12+ ah
1
23
4
561k 2+12− ah
1
23
4
56jk
$
%&
'
()
$
%
&&&&&
'
(
)))))
h0bα0
*
+,
-,
.
/,
0,= 0
0
*+,
-,
./,
0,
E. Riepilogo delle Equazioni del Flutter in Forma Completa
µ ωh2 −ω2( ) −µx
αω2
−µxαω2 µr
α2 ω
α2 −ω2( )
$
%
&&&
'
(
)))
h0bα0
*
+,
-,
.
/,
0,+
+ω2
−1+ 2C(k) jk
jk+ ah + 2C(k)
1k 2+12− ah
1
23
4
56jk
$
%&
'
()
−ah + 2C(k)12+ ah
1
23
4
56jk
ahjkah2 −
j2k
+18+
+2C(k) 12+ ah
1
23
4
561k 2+12− ah
1
23
4
56jk
$
%&
'
()
$
%
&&&&&&&&&&&
'
(
)))))))))))
h0bα0
*
+,
-,
.
/,
0,= 0
0
*+,
-,
./,
0,
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
1
Cenni Introduttivi al SEA
S. De Rosa, F. Franco, F. Ricci
2
Sommario
! Generalità sui fenomeni e sulle grandezze associate alla diminuzione della lunghezza d�onda caratteristica.
! Cenni riassuntivi sulla metodologia SEA e della sua formulazione inversa.
! Tecniche e problematiche sperimentali: " Sistema di Acquisizione " Sistema di Eccitazione " Media Spaziale " Media sulle Condizioni di Eccitazione " Media in Frequenza
3
Perché Alta Frequenza ?
! Problemi di Comfort nei Mezzi di Trasporto " Esperienze Dirette ed Indirette del D.P.A. :
# Velivoli a (Turbo)Elica # Velivoli Turbopropulsi # Elicotteri # Metropolitane # Auto # Treni (Alta Velocità) # Navi
! E� un�Indice dell�Efficacia (Efficienza) della Progettazione Meccanica
4
Alta Frequenza è un Termine Improprio
! L�improprietà nasce dal fatto che anche a basse frequenze di eccitazione, il numero di modi risuonanti in un dato intervallo in frequenza, può già essere elevato.
! Si potrebbe anche avere uno smorzamento così elevato da inibire, fin dalle prime frequenze di eccitazione, la comparsa dei modi propri nella risposta (funzione di trasferimento).
! Si dovrà parlare allora di regioni in frequenza caratterizzate da elevati valori del fattore di sovrapposizione modale. Ma cosa succede alla risposta strutturale quando aumenta la frequenza dell�eccitazione armonica ?
5
Velocità Quadratica Media, [dB], di una Piastra Flessionale in funzione della Frequenza di Eccitazione, [Hz]
1 10 100 1000 1 104140
120
100
80
60
40
logv ,,ωLx
2.1
Ly
3.1
logv ,,ωLx
.9
Ly
.87
logv ,,ωLx
.3
Ly
.7
ω.2 π
Variazione del Punto di Applicazione della Forzante (Spettro di Energia Costante)
6
Richiami delle Nozioni di Base
! Modi e Frequenze Proprie (Autosoluzioni): " Caratteristiche del Sistema Dinamico dipendenti
# dalle Condizioni di Vincolo, # dalle Proprietà Elastiche, e # dalla Proprietà Geometriche.
! Densità Modale, n: " Caratteristica del Sistema Dinamico
# dipendente dalle Proprietà Elastiche e Geometriche, # indipendente dalle Condizioni di Vincolo.
! Smorzamento, η ! Fattore di Sovrapposizione Modale, m(f)=n(f) f η(f)
GLOBALI
LOCALI E GLOBALI
7
1 10 100 1000 1 104140
120
100
80
60
40
logv ,,ωLx
2.1
Ly
3.1
logv ,,ωLx
.9
Ly
.87
logv ,,ωLx
.3
Ly
.7
ω.2 π
10
1
0.1
. . . rileggiamo il grafico !
m
8
Classificazione dei Metodi di Analisi
Analisi Strutturale (Acusto-Strutturale)
Modi Propri
Frequenze Proprie
Smorzamento Modale
Risposta Modale
Metodi Modalim<<1
Densità Modale
Energie Medie
Potenze Trasmesse
Energie Scambiate
Metodi Energeticim>>1
MetodologieNumeriche e Sperimentali
9
S.E.A.: Statistical Energy Analysis
! Il S.E.A. è stato oggetto di rinnovata attenzione agli inizi degli anni �90.
! Si può parlare di una tecnica che necessita della massima integrazione tra i l modello f isico e la prova di laboratorio.
! Il SEA è così fortemente legato alla sperimentazione che l�assenza di esperienze di laboratorio può condurre a conclusioni prive di senso (anche se apparentemente accettabili).
! Il SEA è : semplice numericamente, complesso intellettualmente.
Anni
Interesse S.E.A.
F.E.M.
10
impedenza smorzamento
! Il SEA stima l�energia dissipata e scambiata tra sottosistemi, in funzione della potenza ricevuta dall�esterno.
! Le incognite sono energetiche e valgono all�interno del sottosistema.
! Il sottosistema è un dominio spaziale caratterizzato da una singola modalità di propagazione del disturbo strutturale (o acustico): $ onde longitudinali $ onde flessionali $ onde di taglio $ onde di torsione
Cosa è il SEA ?
densità modale
potenza
11
Esempio Formulazione SEA: 2 Gradi di Libertà
!"#
$%&
!"#
$%&
'(
)*+
,ω
=⋅η+ηη−
η−η+η
2
1
2
1
PP
EE 1
21212
21121
n n1 12 2 21η η=
( ). ( )
//
η η η
η η ω1 12 1 21 2
2 21 2
1
2
1
2
1
2
1 1
2 2
1+ −
+
$
%&
'
()*+,
-./=
*+,
-./
*+,
-./=*+,
-./
n nsimm n
ee
PP
ee
E nE n;
12
Formulazione Generale del SEA
η η η η
η η η η
η η
η η η η
ω
1 12
21 1
12 2 21 2
2
1
1 21
1
1
2
1
21
+ − −
− + −
+
− − +
$
%
&&&&&&&&&&
'
(
))))))))))
*
+,,
-,,
.
/,,
0,,
=
*
+,,
-,,
.
/,,
0,,
=
= ≠
= ≠
=
−
∑
∑
∑
∑
jj
N
N
jj j
N
N
i ijj j i
N
N N N Njj
NN N
EE
E
PP
P
;
;
jijiji nn η=ηCPP (Coupling Power Proportionality)
13
Esempio Formulazione SEA: 2 Gradi di Libertà
Sottosistema 1: E1
Sottosistema 2: E2
P1 P2
P12
P21
P1, DISSIPATA P2, DISSIPATA
14
Sistemi Classici
! Vari sistemi possono essere studiati con la formulazione SEA più semplice possibile:
# Due Aste # Due Travi giunte ad angolo α # Due Pannelli giunti ad angolo α # Pannello ed Volume Acustico (Semianechoic Chamber,
Reverberant Facility)
!"#
$%&
!"#
$%&
'(
)*+
,ω
=⋅η+ηη−
η−η+η
2
1
2
1
PP
EE 1
21212
21121
15
Smorzamento Complessivo (1/2)
ηη η η
η
η
η=
+
+⇒ = +
#
$%
&
'( +
#
$%
&
'(
−E EE E
EE
EE
1 1 2 2
1 2 1
2
1
12 2
1 11 1
( )
( )
( )
aEE
bEE
cEE
:
:
:
1
2
1 2
1
22
2
11
12
0
0
= ⇒ =+
= ⇒ =
= ⇒ =
ηη η
η η
η η
16
Smorzamento Complessivo (2/2)
η
η
==
=
∑
∑
E
E
j jj
N
jj
N1
1
17
Formulazione SEA Inversa Eccitazione a Turno
!!"
!!#
$
!%
!&
'
!"
!#
$
ω=
!%
!&
'
!"
!#
$
⋅***
+
,
---
.
/
η+ηη−
η−η+η
!%
!&
'
!"
!#
$
ω=
!%
!&
'
!"
!#
$
⋅***
+
,
---
.
/
η+ηη−
η−η+η
2P01
2)2(E
1)2(E
21212
21121
01P1
2)1(E
1)1(E
21212
21121
18
Power Injection Method (Metodo dell�Iniezione di Potenza)
!"
!#
$
!%
!&
'
!!"
!!#
$
!!%
!!&
'
((((
)
*
++++
,
-
ω=
η
η
η
η
−
−
−
−
2P001P
1
2
21
12
1
2)2(E2
)2(E1)2(E0
02)2(E1
)2(E1)2(E
2)1(E2
)1(E1)1(E0
02)1(E1
)1(E1)1(E
{ } [ ] { }ηω
=−1 1
E Pij
ij
( )( )
( )( )
19
Obiettivo delle Prove
! Non è superfluo specificare ulteriormente l�obiettivo delle prove: " eccitare un sistema strutturale (acusto-strutturale) nel
massimo intervallo in frequenza consentito dalla apparecchiatura a disposizione;
" misurare direttamente: forze, velocità, impedenze; " realizzare una banca dati sufficientemente estesa per
l�analisi successiva dei risultati (misurazioni indirette): # analisi dei flussi, # ripetibilità dei risultati, # valutazioni degli scambi (coupling e direct loss factors), # ecc.
% GENERALIZZAZIONE DEI RISULTATI ? 20
Sistema di Eccitazione
! Esso dovrebbe garantire: " pulizia del segnale in tutto il range in frequenza che si deve
investigare; " assicurare che il livello di potenza (interazione con la
struttura) sia sufficiente all�aumentare della frequenza di eccitazione,
" trasparenza rispetto alla prova che si sta conducendo: minore
influenza possibile sui risultati.
{ }P F vSISTEMA= ⋅∗12Re
21
Sistema di Acquisizione
! Esso dovrebbe garantire: " pulizia del segnale in tutto il range in frequenza che si deve
investigare: & sensori non a contatto, ' sensori a contatto.
" assicurare che i livelli energetici sufficientemente leggibili all�aumentare della frequenza di eccitazione,
" trasparenza rispetto alla prova che si sta conducendo: minore influenza possibile sui risultati.
22
Media Spaziale
! Per ogni sottosistema i punti di acquisizione dovrebbero essere scelti: ( lontano dai vincoli (δ è
funzione della frequenza di eccitazione);
( lontano dalle linee nodali; ( sufficientemente lontano dal
punto di eccitazione (la velocità in un intorno del p u n t o d i e c c i t a z i o n e rappresen ta de i va lor i singolari)
Sottosistema: Piastra Irregolare
Acquisizione Eccitazione
δ#
23
Media sulle Condizioni di Eccitazione
! Per ogni sottosistema i punti di eccitazione dovrebbero essere scelti: ( lontano dai vincoli (δ è
funzione della frequenza di eccitazione);
( lontano dalle linee nodali; ( sufficientemente lontano dai
punti di acquisizione; ( v i c i n o o l o n t a n o a l l a
giunzione ?
Piastre Irregolari
Acquisizione Eccitazione
δ#
24
Generazione dei Primi Dati
Generalmente la Matrice H, per ogni sottosistema è quadrata ed è generalmente 3<N<7
Acq
uisi
zion
i
Eccitazioni
1 2 3 .. .. N
1 2 3 .. .. .. .. .. .. M H
V
! La V deve essere indipendente dall�ordine di media (righe e colonne).
! L�analisi della singola matrice H, permette una buona analisi preliminare dei dati misurati: " facilità di individuazione delle
misure non corrette; " p o s s i b i l i t à d i e v i d e n z i a re
eventuali non omogeneità di comportamento (ad es. : il posizionamento dell�eccitazione rispetto alla giunzione);
" ecc.
25
Medie Spaziali
! In generale si avrà una media rispetto ai punti di acquisizione ed una rispetto ai punti di eccitazione.
! Che tipo di media è conveniente adottare ? Dipende dalla distribuzione dei dati (modello statistico).
! E� stato verificato che quando i dati sperimentali mostrano una sufficiente stabilità tra prova e prova, la scelta del tipo di media è ininfluente.
dB velN M v
vREF
jkk
M
j
N
( ) log*
=!
"#
$
%&
==∑∑10
1 110 2
2
11
dB velN M
vv
jk
REFk
M
j
N
( ) log=!
"#
$
%&
'
())
*
+,,==
∑∑10 1
10
2
211
Media Logaritmica
Media Aritmetica
26
Medie in Frequenza
! La necessità di lavorare in bande in frequenza (ottave e terzi d�ottava) è solo formale, in quanto è connessa alla definizione di densità modale (e quindi di fattore di sovrapposizione modale).
! In generale si lavorerà in banda stretta, quando possibile e, se necessario, si introdurrà a posteriori una ulteriore media per bande in frequenza.
! Quest�ultima media non ha alcun effetto sulla qualità dei risultati: serve solo ad uno smoothing degli andamenti.
27
Organizzazione delle Prove: Singolo Sottosistema
Misura della Potenza in Ingresso
Velocitàdel Punto di Eccitazione
Forzadel Punto di Eccitazione
Power Input
Misura dell'Energia Totale
Velocitàper N punti di Acquisizione
Velocitàper M punti di Eccitazione
Ve loc ità Me die
η ω= −P E( ) 1
ZFvn
Z= ∝
"#$
%&'
; Re1
28
Organizzazione delle Prove: Sistema Complessivo (costituito da G sottosistemi)
Misura della Potenza in Ingresso
Velocitàdel Punto di Eccitazione
Forzadel Punto di Eccitazione
Power Input
Misura dell'Energia Totale
Velocitàper N punti di Acquisizione
Velocitàper M punti di Eccitazione
Ve loc ità Me die
ZFvn n nG= = + +; 1 …
{ } [ ] { }ηω
=−1 1
E Pij
ij
( )( )
( )( )
29
Analisi delle Matrici di Varianza/Covarianza
! I dati misurati sperimentalmente dovranno essere utilizzati per il calcolo delle grandezze cercate.
! I dati si presenteranno sempre nella forma di un valor medio e di una deviazione standard (matrici di valori medi e matrici di deviazioni standard).
! Poiché il metodo SEA sia nella sua formulazione diretta quanto inversa, è legato ad una formulazione algebrica, converrà sempre adottare l�analisi delle matrici di varianza/covarianza.
! Ciò consentirà un duplice obiettivo: " verificare l�omogeneità dei dati elaborati rispetto a quelli
misurati (a questo stadio, dovrebbero essere molto regolari), " controllare la possibile generalizzazione delle stime.
30
Critiche Fondamentali al SEA [Mace, 1994]
ji)i(
jij)i(
i nn η=ηIl CPP è sempre applicabile
ji)j(
jij)j(
i nn η=ηIl CPP è sempre applicabile
ji)j(
jij)i(
i nn η=ηLa generalizzazione del CPP
non sempre è applicabile
31
I Coupling Loss Factors possono essere negativi !
! E� s t a t o d i m o s t r a t o c h e i coe f f i c i en t i d i perd i ta per accoppiamento possono diventare negativi.
! Esso è il risultato dell�analisi di una configurazione in cui il SEA non può a rigori essere applicato.
! Se un coefficiente ηij diventa negativo, ciò significa che i due sottosistemi interessati si trovano in una instabilità energetica (il sottosistema con maggiore energia ne cede a quello che ne ha di meno): questa situazione non è prevedibile dal SEA, ma può essere evidenziata sperimentalmente.
ηij non può essere negativo !
32 Esperie
nza
Esperienza
Esperienza Esperie
nza
Esperienza
Esperienza
Esperienza
Esperienza Strumento
Analitico
Strumento Numerico
Strumento Sperimentale
SEA
Esperienza
Esperienza Esperie
nza
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
6
I coe�cienti di influenza energetici (dai modi
all’energia)
L’utilizzo di modelli energetici e sempre piu frequente per descrivere ilcomportamento vibrazionale alle alte frequenze di sistemi complessi. Il sis-tema e diviso in sottosistemi energetici e la risposta e descritta in terminidi energia del sottosistema mediata sul tempo E e di potenza in ingresso alsottosistema Pin. Si osservi che queste, in teoria, sono risposte in frequenzadiscrete, ma sono solitamente mediate in frequenza (in particolare in bandadi terzi d’ottava) in modo che il modello relazioni le energie dei sottosistemimediante nel tempo e in frequenza e le potenze in ingresso. Il piu importantedegli approcci energetici e il SEA (ovvero Statistical Energy Analysis) (Ref.[15],[16]), il cui sviluppo ha avuto inizio dei primi anni ’60 proprio per la neces-sita di predire il comportamento vibrazionale alle alte frequenze. In generale,il SEA stima l’energia dissipata e scambiata tra sottosistemi, in funzione del-la potenza ricevuta dall’esterno. L’applicazione del SEA coinvolge una seriedi ipotesi che vengono specificate in questo capitolo. Infatti, poiche si trattadi un’analisi statistica, e necessario analizzare quali sono le condizioni per lequali la stima e rappresentativa della risposta dell’intero sistema. Negli anni’80, l’incapacita di comprendere quali fossero le ipotesi di validita di questoapproccio aveva portato ad un rallentamento del suo sviluppo, ma negli anni’90 il SEA e stato oggetto di rinnovata attenzione grazie ai risultati raggiuntimediante una nuova tecnica energetica, l’EDA (Energy Distribution Approch)
(Ref. [14],[20]). L’EDA ha permesso innanzitutto di evidenziare quali sono leipotesi di validita del SEA, ma soprattutto consente di ricavare la rispostaenergetica del sistema a partire dai modi propri del sistema stesso. In ter-mini ingegneristici, tale a↵ermazione si traduce nel poter utilizzare i modipropri ricavati da un’analisi agli elementi finiti per un’analisi energetica allealte frequenze.
Nel corso di questo capitolo, vengono presentati le proprieta di un modelloSEA e di un modello ED, in particolar modo quali sono le condizioni checonsentono il passaggio dall’uno all’altro.
94 6 I coe�cienti di influenza energetici (dai modi all’energia)
6.1 Modello SEA
Dato un sistema strutturale, lo si suddivide in sottosistemi energetici, doveper sottosistema energetico si intende un dominio spaziale caratterizzato dauna singola modalita di propagazione del disturbo strutturale. Ogni sotto-sistema e eccitato da forze random, stazionarie e distribuite. Si assume cheil sistema sia lineare e che l’eccitazione applicata sui diversi sottosistemi sianon correlata. La risposta del sistema e descritta dalle potenze in ingressomediate nel tempo Pin e le energie dei sottosistemi E mediate su una certabanda in frequenza ⌦. Introduciamo in questo paragrafo un modello SEA,da confrontare poi con il modello ED ricavato nel paragrafo 6.2, cercando, sepossibile, le condizioni che permettono il passaggio da un modello all’altro.
Nel SEA, per ogni sottosistema r si scrive un’equazione di bilancio dipotenza del tipo
Pin,r = Pdiss,r + Pcoupl,r (6.1)
dove Pin,r e la potenza in ingresso, Pdiss,r e la potenza dissipata e Pcoupl,r
e la potenza netta scambiata dal sottosistema r con gli altri sottosistemi. InFigura 6.1 sono rappresentati gli scambi energetici che si instaurano in unsistema costituito da due sottosistemi energetici.
Figura 6.1: flussi di potenza tra due sottosistemi energetici.
6.1 Modello SEA 95
In particolare:
• Pin,r = !⌘rEr1, dove ! e la frequenza di centro banda, ⌘r e il fattore di
perdita per smorzamento (damping loss factor) del sottosistema r e Er el’energia del sottosistema r;
• Pcoupl,r =P
s Prs, dove Prs e la potenza scambiata tra il sottosistema r eil sottosistema s.
La potenza scambiata tra due sottosistemi r e s puo essere espressa come
Prs = !nr⌘rs⇣Er
nr� Es
ns
⌘
(6.2)
dove ⌘rs e il coe�ciente di perdita per accoppiamento (coupling loss factor)che regola gli scambi energetici tra i sottosistemi r e s, mentre nr e la densitamodale asintotica del sottosistema r.
La (6.2) e un’assunzione fondamentale per il SEA secondo cui la poten-za scambiata tra due sottosistemi e proporzionale alla di↵erenza di ener-gia modale ei = Ei
nidei due sottosistemi. Tale assunzione e detta princi-
pio di proporzionalita della potenza scambiata (o coupling power
proportionally o CPP). La (6.2) puo anche essere espressa come
Prs = !⌘rsEr � !⌘srEs. (6.3)
Pertanto, se il CPP e valido, i coe�cienti di perdita per accoppiamento devonoverificare la relazione di consistenza
nr⌘rs = ns⌘sr. (6.4)
Assemblando le equazioni sin qui elencate, e possibile scrivere
Pin = L·E (6.5)
dove L e la matrice dei fattori di perdita (sia di smorzamento che diaccoppiamento) data da
1 Convenzionalmente, nel SEA si assume uno smorzamento strutturale, e quindile equazioni del SEA vengono scritte in termini di fattore di perdita (dampingloss factor). Nel paragrafo 6.2, dove la risposta e scritta in termini di modi delsistema, si utilizza uno smorzamento viscoso per due ragioni. Innanzitutto, lapotenza dissipata e proporzionale all’energia cinetica, che e la quantita piu facil-mente misurabile. Inoltre, la relazione qui e approssimata ed e corretta solo incondizioni di risonanza, allorche energia cinetica e potenziale (mediate in fre-quenza) sono uguali. Per smorzamenti piccoli, e possibile passare da un modelloall’altro sostituendo ⌘ = 2⇣, dove ⇣ e il fattore di smorzamento viscoso. In pratica,si introducono errori trascurabili, e qualora questi non lo fossero l’analista nonpotrebbe applicare il SEA.
96 6 I coe�cienti di influenza energetici (dai modi all’energia)
L = !· diag�
⌘j�
+!
2
6
6
6
4
⌘12
+ ⌘12
+ . . . �⌘12
�⌘12
. . .�⌘
12
⌘12
+ ⌘12
+ · · ·� ⌘12
. . .�⌘
12
�⌘12
⌘12
+ ⌘12
+ . . . . . ....
......
. . .
3
7
7
7
5
(6.6)dove diag(· ) indica una matrice diagonale. La somma degli elementi appar-tenti alle colonne della matrice dei fattori di perdita per accoppiamento e paria zero (la potenza netta scambiata in tutto il sistema e nulla). Si osservi chele equazioni del SEA sono valide in senso stretto nel senso di medie d’insieme,ovvero quando potenze ed energie sono mediate su un insieme di sistemi simili,ma leggermente di↵erenti.
Condizioni per la validita di un modello SEA
Il SEA coinvolge un determinato numero di assunzioni e approssimazioni,che possiamo suddividere in condizioni necessarie e condizioni desiderabili.Solo se sono soddisfatte tutte le condizioni, allora sicuramente e valido il CPPe la potenza scambiata tra due sottosistemi accoppiati dipende solo dalle loroenergie modali e dai fattori di perdita per accoppiamento, ovvero e possibilee↵ettuare un approccio SEA classico.
Innanzitutto, a�nche il comportamento di un sistema possa essere de-scritto da un modello SEA, i parametri di tale modello devono soddisfare duecondizioni necessarie:
• la somma dell’r-esima colonna della matrice L deve essere uguale a !⌘r,poiche deve essere soddisfatto il principio di conservazione dell’ener-gia;
• i termini fuori della diagonale devono soddisfare la condizione di consis-tenza, ovvero il principio di reciprocita.
Se sono soddisfatte le condizioni necessarie, allora e valido il CPP e la poten-za scambiata tra due sottosistemi accoppiati dipende solo dalle loro energiemodali e dai fattori di perdita per accoppiamento.
Inoltre, ci sono un certo numero di condizioni desiderabili, che permettonodi classificare il tipo di modello SEA realizzato. La prima condizione desider-abile, e la piu importante, riguarda i fattori di perdita per accoppiamentorelativi a due sottosistemi non fisicamente collegati (fattori di perdita per ac-coppiamento indiretto, o indirect coupling loss factor), che dovrebbero esserenulli. Le altre condizioni desiderabili riguardano, piu in generale, i fattori diperdita per accoppiamento, che dovrebbero essere:
• positivi;• indipendenti dai fattori di perdita per smorzamento (almeno nell’approccio
classico al SEA).
Inoltre, dato il generico fattore di perdita per accoppiamento ⌘rs, esso dovrebbedipendere solo dalle proprieta locali della giunzione tra i sottosistemi r e s e
6.2 Modello ED 97
da quei sottosistemi collegati a quella giunzione, ma non dalle proprieta dialtri sottosistemi distanti. In altre parole, dati i sottosistemi r e s, il coe�-ciente di perdita per accoppiamento ⌘rs e lo stesso sia se consideriamo i duesottosistemi isolati sia se li consideriamo parte di una struttura piu grande 2.Ovviamente, se tale condizione desiderabile e soddisfatta, l’analista guadagnaun grosso vantaggio perche puo estrarre ogni coppia di sottosistemi dalla strut-tura piu grande e calcolarne i coupling loss factor considerando tale coppiaisolata.
Se le due condizioni necessarie sono soddisfatte e i fattori di perdita peraccoppiamento indiretto sono nulli (prima condizione desiderabile), allora ilmodello ottenuto e un modello propriamente SEA (proper-SEA model) e lamatrice L e detta matrice propriamente SEA (proper-SEA matrix ). In questocaso, l’analista ne guadagna un notevole vantaggio poiche e semplice rela-zonare i parametri del SEA allo smorzamento fisico ed ai componenti di ac-coppiamento. Se invece sono valide solo le condizioni necessarie, si ottiene unmodello quasi-SEA, ed L e detta quasi-SEA matrix : in questo caso, e possi-bile eseguire, in teoria, un’analisi SEA-like, ma e necessario coinvolegere gliindirect coupling loss factor in quanto non sono piu nulli.
Vale la pena osservare che l’esistenza di fattori di perdita per accoppia-mento indiretto non nulli ⌘ri (dove r e i sono due sottosistemi fisicamentenon collegati) non implica che l’energia fluisca tra i due sottosistemi (non epossibile, non essendo collegati), ma significa che la potenza scambiata Prs
tra due sottosistemi r e s vicini e fisicamente accoppiati dipende anche dal-l’energia di un terzo sottosistema i. Ovviamente, e chiaro che in questo casola potenza scambiata Prs non e piu calcolabile dalla (6.2), e quindi il CPPnon e piu valido il CPP e di conseguenza decadono anche altre assunzioni delSEA.
6.2 Modello ED
In un modello ED, la relazione che lega le energie e le potenze in ingressoe
E = A·Pin (6.7)
dove A e la matrice dei coe�cienti di influenza energetici nella bandain frequenza considerata. Mediante la (6.7), il sistema fisico e modellato comedistribuzione di energia. L’elemento Ars e l’energia (mediata nel tempo e infrequenza) nel sottosistema r per unita di potenza (mediata nel tempo e infrequenza) in ingresso nel sottosistema s. Generalmente, la matrice A e unamatrice non simmetrica, tranne in alcune circostanze.
A questo punto, e possibile ricavare i termini della matrice A dai modi delsistema, che e la novita dell’EDA rispetto alle altre tecniche energetiche. Come
2 Cio e in contrasto con un modello ED, in quanto i coe�cienti di influenzaenergetici dipendono implicitamente dalle proprieta dell’intera struttura.
98 6 I coe�cienti di influenza energetici (dai modi all’energia)
per il modello SEA, anche in questo caso, si suddivide il sistema in sottosistemiche sono eccitati da forze random, stazionarie e distribuite e si assume che ilsistema sia lineare e che l’eccitazione applicata su diversi sottosistemi sia noncorrelata. Si fa l’ipotesi di smorzamento viscoso, sebbene i modi possano averediverse larghezze di banda.
6.2.1 Risposta in frequenza discreta
Consideriamo un sistema discreto eccitata in un punto x = x1
da una forzaperiodica f(x, t) = Fej!t�(x� x
1
) (x puo essere un vettore per strutture bi-o tri-dimensionali), dove F e l’ampiezza della forza. L’ampiezza della rispostadinamica in un punto x = x
2
puo essere espressa in termini dei modi propridel sistema dalla (6.8)
W (!, x1
, x2
) =X
j
↵j(!)�j(x1
)�j(x2
)F (6.8)
dove �j(x) e l’autovettore del modo j-esimo e
↵j(!) =1
!2
j � !2 + i�j!(6.9)
e la recettanza modale del modo j-esimo (!j e la frequenza naturale del modoj-esimo). Come predetto, nella (6.9) si e assunto uno smorzamento viscoso,ovvero
�j = 2⇣j!j = ⌘j!j . (6.10)
In particolare, secondo il metodo dell’half-power bandwidth (vedi Capitolo4), si assume il fattore di smorzamento ⇣j proporzionale alla larghezza dibanda �j in cui esso agisce (dimezzando la potenza), sebbene ⇣ vari da modoa modo e quindi dipenda dalla frequenza. Alternativamente, come mostratodalla (6.10), e possibile fare l’ipotesi di smorzamento strutturale con fattore diperdita ⌘, ma cio comporta delle approssimazioni sulle equazioni che seguono(che sono esatte nelle ipotesi di smorzamento viscoso).
Si osservi che i modi del sistema sono normalizzati rispetto alla massageneralizzata, e per la proprieta di ortogonalita dei modi propri risulta esserevalida la (6.11)
Z
⇢(x)�j(x)�k(x) = �jk (6.11)
dove ⇢(
x) e la densita di massa e �jk e il delta di Kronecker (che pero, inquesto caso, deve essere dotato di opportune dimensioni).
6.2.2 Densita di energia cinetica, potenza in ingresso econservazione dell’energia
Definita la risposta del sistema, e possibile esprimere il proncipio diconservazione dell’energia in funzione delle caratteristiche modali del sistema.
6.2 Modello ED 99
La densita di energia cinetica mediata nel tempo in x = x2
e pari a
DT (!, x1
, x2
) =1
2Re
n1
2⇢(x
2
)!2WW ⇤o
=
=X
j
X
k
⇣1
4!2�jk(!)
⌘⇣
�j(x1
)�k(x2
)|F 2|⌘⇣
⇢(x2
)�j(x2
)�k(x2
)⌘
(6.12)
dove�jk(!) = Re{↵j(!)↵
⇤k(!)} (6.13)
(l’asterisco * sta ad indicare il complesso coniugato). In particolare, nella(6.12), al secondo membro e scritto il prodotto di tre termini che dipendono,nell’ordine, da frequenza, sorgente x = x
1
e ricevitore x = x2
.La potenza in ingresso mediata nel tempo e pari a
Pin =1
2Re{i!W (!, x
1
, x1
)F ⇤} =X
j
1
2!2�j�jj(!)�
2
j (x1
)|F 2| (6.14)
dove
�jj =1
h
�
!2
j � !2
�
2
+�
�j!�
2
i (6.15)
Integrando la densita di energia cinetica sull’intero sistema, e possibilecalcolare l’energia cinetica totale. Dalla proprieta di ortogonalita (6.11), segueche per ogni modo j-esimo vale
Pin,j(!) = 2�jTj (6.16)
dove Tj e l’energia cinetica associata al modo j-esimo. La (6.16) e di certo unenunciato di conservazione dell’energia scritto modo per modo. In particolare,si approssima l’energia totale al prodotto di due volte l’energia cinetica totaleper il termine �j (che puo essere sostituito da 2⇣j!j o ⌘j!j a seconda delmodello di smorzamento adottato).
6.2.3 Coe�cienti di influenza energetici
Andiamo ora ad asplicitare i coe�cienti di influenza energetici in terminidei modi del sistema. Si suppone che l’eccitazione applicata a diversi sottosis-temi sia scorrelata, e pertanto e possibile considerare le eccitazioni una allavolta. In particolare, supponiamo di applicare un’eccitazione spazialmente dis-tribuita del tipo rain-on-the-roof (pioggia sul tetto) sul sottosistema s e cheagisce su una banda di frequenza ⌦. Per sollecitazione rain-on-the-roof si in-tende un’eccitazione casuale spazialmente distribuita, che sia delta-correlatae la cui ampiezza sia proporzionale alla densita di massa locale ⇢(x) (ovveroS0f (x,!) = Sf (!)⇢(x)), mentre la densita spettrale di cross-correlazione e nul-
la. In questo modo, l’eccitazione applica delle forze modali uguali a tutti i
100 6 I coe�cienti di influenza energetici (dai modi all’energia)
modi del sottosistemi e inietta energia mediante le onde in maniera egualein tutti i punti del sottosistema eccitato. In queste circostanze, il contributodella media quadratica dell’eccitazione f2 nella banda in frequenza �! e
f2 =1
2|F 2| = Sf (!)⇢(x)�!, (6.17)
dove la densita spettrale Sf (!) potrebbe essere una funzione della frequenza,ma nel corso della trattazione e considerata costante per convenienza.
Fatte le dovute considerazioni sul tipo di eccitazione, e possibile calcolarel’energia cinetica, mediata nel tempo e in frequenza, e la potenza in ingresso,mediata nel tempo.
In particolare, la media in frequenza dell’energia cinetica del sottosistema rper una potenza in ingresso nel sottosistema s e ottenuta integrando la (6.12)sul sistema sorgente s e sul sistema ricevente r (in quanto stiamo parlandodi una densita di energia), oltre che sulla banda in frequenza considerata ⌦,ovvero
T (r) =1
⌦
Z
!2⌦;x12s;x22r
DT (!, x1
, x2
)d! dx1
dx2
. (6.18)
Nel caso di eccitazione rain-on-the-roof, e possibile scrivere energia cinet-ica media nel sottosistema r e potenza in ingresso media nel sottosistema s
rispettivamente come
T (r) = 2Sf
X
j
X
k
�jk (s)jk
(r)jk (6.19)
P (r)in = 2Sf
X
j
2�j�jj (s)jj (6.20)
dove:
•�jk =
1
⌦
Z
!2⌦
1
4!2�jk(!) d! (6.21)
e la cross-modal power mobility, che dipende solo dalle frequenze naturalie dalla larghezza di banda dei modi;
• (r)jk =
Z
x2r
⇢(x)�j(x)�k(x) dx (6.22)
e il cross-mode partecipation factor, che dipende solo dalla correlazionespaziale tra il modo j-esimo e il modo k-esimo nel sottosistema r.
L’introduzione dei termini �jk e (r)jk permette di suddividere la caratter-
izzazione spaziale da quella in frequenza. Nei paragrafi successivi tali terminisono trattati piu approfonditamente.
6.2 Modello ED 101
Dalla (6.20) si evince come la potenza in ingresso sia la somma delle poten-ze in ingresso di ogni modo, mentre dalla (6.19) si evince come l’energia ci-netica sia la somma dei termini modali incrociati che coinvolgono una coppiadi modi alla volta.
A questo punto, e possibile ricavare i coe�cienti di influenza energetici.Infatti, come gia scritto all’inizio di questo paragrafo, il generico elemento Ars
e l’energia (mediata nel tempo e in frequenza) nel sottosistema r per unitadi potenza (mediata nel tempo e in frequenza) in ingresso nel sottosistema s.Pertanto, e possibile scrivere
Ars =E(r)
P (s)in
=2T (r)
P (s)in
=
P
j
P
k �jk (s)jk
(r)jk
P
j �j�jj (s)jj
. (6.23)
Si osservi che i termini Ars sono esatti, perche non e stata fatta alcun tipodi ipotesi oltre alla linearita del sistema e all’eccitazione non correlata.
Integrali di frequenza �jk e �jj
Il termine �jk (Cross-modal power mobility) e un integrale di frequenza lacui ampiezza dipende innanzitutto dalle frequenze naturali dei modi j-esimoe k-esimo. Tale integrale va calcolato su una banda in frequenza ⌦ sceltain maniera opportuna. Data la (6.21), ricordando l’espressione di �jk (6.13),e chiaro che �jk e piccolo a meno che i modi j-esimo e k-esimo non sianoentrambi risonanti in ⌦, ovvero !j ,!k 2 ⌦. Inoltre, �jk e particolarmentegrande se i modi si sovrappongono, ovvero qualora le loro larghezze di bandahalf-power giacciono l’una sull’altra. In questo caso si parla di overlap.
Figura 6.2: esempio di overlap.
La condizione analitica per avere overlap e
|!j � !k| �j ��k
2. (6.24)
Un altro termine particolarmente grande e il termine di auto power mobility
�jj nel caso in cui il modo j-esimo sia risonante in ⌦.Vediamo ora in dettaglio l’espressione analitica dei termini �jj e �jk. Nel-
l’ipotesi di smorzamento piccolo (tale da poter lavorare con modi reali) e
102 6 I coe�cienti di influenza energetici (dai modi all’energia)
costante, quando i modi sono risonanti gli integrali di frequenza possono essereapprossimati come
�jj =1
⌦
⇡
8�j(6.25)
�jk =1
⌦
⇡(!j + !k)2(�j +�k)
16h
�
!2
j + !2
k
�
2
+ (�j!j +�k!k)2i (6.26)
Queste espressioni sono esatte se il limite di integrazione e (0,1), qualsiasisia il livello di smorzamento. La (6.26) puo essere ulteriormente semplificata sele larghezze di banda � dei modi j e k sono uguali. Quindi, se �j = �k = �,risulta
�jk =1
⌦
⇡
8�
1
1 +⇣
!j�!k
�
⌘
2
= �jj1
1 +⇣
!j�!k
�
⌘
2
(6.27)
dove tutti i termini �jj relativi a modi risonanti sono uguali. La (6.27) puoessere riscritta come
�jk = �jjµjk (6.28)
dove
µjk =1
1 + S2
jk
=M2
jk
1 +M2
jk
(6.29)
Sjk =|!j � !k|
�(6.30)
Mjk =1
Sjk=
�
|!j � !k|(6.31)
In particolare, Mjk e il fattore di sovrapposizione modale dei modi j e k,mentre Sjk e la separazione modale dei due modi. Il termine µjk agisce comeun filtro, che determina quali coppie di modi contribuiscono significativamentealla risposta totale: µjk e prossimo all’unita se i modi j e k si sovrappongono,altrimenti e prossimo a zero. Approssimativamente, possiamo scrivere
µjk =
(
1, se |!j � !k| < � (overlap)
0, se |!j � !k| < � (no overlap)(6.32)
Fattori di partecipazione (r)jk e (r)
jj
Il termine (r)jk (Cross-mode partecipation factor) indica la correlazione del-
la coppia di modi (jk) all’interno del sottosistema r. Per la (6.11), il principiodi ortogonalita dimostra che i modi globali �j(x) e �k(x) non si accoppiano(non scambiano energia) sull’intero sistema essendo ortogonali, e quindi ognimodo compie lavoro solo su se stesso. Diversamente, se si considera un singolosottosistema, i due modi riescono a scambiarsi energia localmente, ottenendo
6.2 Modello ED 103
proprio il fattore di partecipazione (r)jk . Per ogni sottosistema r, e possibile
individuare quali sono le coppie che si scambiano piu energia. Tale passaggio efondamentale perche i fattori di partecipazione compaiono sia nell’espressionedell’energia cinetica che in quella della potenza. In particolare, nell’espressione
di T (r) sono presenti sia (s)jk che (r)
jk , che rappresentano l’energia che i modiglobali �j(x) e �k(x) si scambiano rispettivamente nel sottosistema sorgente
s e in quello ricevente r. Nell’espressione di P (s)in , invece, compare il fattore di
auto-partecipazione modale � (s)jj , che indica come viene assorbito lo spettro di
potenza Sf dal j-esimo modo. In particolare, il termine � (s)jj fornisce un’indi-
cazione dell’energia cinetica immagazzinata nel sottosistema s dal modo j, epertanto permette di classificare se il modo j e globale o locale:
• se � (s)jj e grande per la maggior parte dei sottosistemi appartenenti al
sistema, allora il modo j-esimo e un modo globale, cioe la sua energiacinetica e estesa globalmente su tutto il sistema;
• se � (s)jj e significativo solo per pochi sottosistemi, allora il modo j-esimo
e un modo locale, cioe la sua energia cinetica tende ad essere contenutasolo in quei pochi sottosistemi.
I termini di auto partecipazione modale devono essere necessariamentepositivi, mentre i termini incrociati possono essere sia positivi che negativi.Infatti, poiche ogni sistema di modi propri e ortogonale sull’intero sistemastrutturale, se quest’ultimo e costituito da Ns sottosistemi, allora deve valerela relazione
NsX
s=1
(s)jk = �jk (6.33)
E opportuno sottolineare (Ref. [14],[27],[28]) che il valore medio (sui modipresenti) del fattore di autopartecipazione nel generico sottosistema s e parial rapporto tra la densita modale nel sottosistema s e la densita modale intutto il sistema, ovvero
E⇥
(s)jj
⇤
= ⌫s =ns
ntot(6.34)
dove ntot e la densita modale totale nel sistema (la somma delle densita modalidi tutti i sottosistemi), ns e la densita modale nel sottosistema s e quindi ⌫se la frazione di densita modale del sottosistema s.
6.2.4 Alcune proprieta dei coe�cienti di influenza energetici
Supponendo, per convenienza, che lo smorzamento sia costante per tutti imodi, i coe�cienti di influenza soddisfano due proprieta:
Ars � 0 (6.35)
104 6 I coe�cienti di influenza energetici (dai modi all’energia)
X
r
Ars =1
�(6.36)
Si osservi che la (6.36), ovvero che la somma di una generica colonnadella matrice A e uguale a 1/� e una conseguenza del principio di conser-vazione dell’energia. Se invece i modi hanno diversi livelli di smorzamento,allora tale relazione non puo essere sviluppata direttamente per le energiedei sottosistemi, ma e possibile scrivere una relazione simile per le potenzedissipate.
Infine, se lo smorzamento e piccolo, tale che il contributo dei modi non riso-nanti in ⌦ possa essere trascurato, alla luce di quanto detto sinora e possibilesemplificare la (6.23) come
Ars =1
�
P
j
P
k µjk (s)jk
(r)jk
P
j (s)jj
, (6.37)
dove in questo caso si considerano solo i modi risonanti in ⌦.
6.3 Relazione tra SEA e EDA
Nei paragrafi 6.1 e 6.2 sono state analizzate le condizioni di validita di unmodello SEA e EDA, rispettivamente. In particolare, riassumendo, un modelloED per la sua validita richiede semplicemente l’ipotesi di linearita del sistemae di eccitazioni non correlate. Un modello SEA richiede un numero consid-erevole di ipotesi (oltre alle due appena citate), e pertanto non e scontato che,come si potrebbe pensare, l’inversa della matrice dei coe�cienti di influenzaenergetici A sia una matrice proper-SEA o quasi-SEA. In questo paragrafoci proponiamo di determinare sotto quali condizioni e possibile invertire lamatrice A ottenendo la matrice di un modello quasi-SEA L. Inoltre, tali con-dizioni sono indicative della possibilita di utilizzare un modello SEA-like perla descrizione del comportamento del sistema, ovvero quando i risultati SEAsono significativi.
A�nche L sia una matrice SEA e necessario che la somma dei terminidella colonna r-esima sia pari a !⌘r e che i termini al di fuori della diagonaleprincipale soddisfino il principio di consistenza.
La matrice A puo essere scritta come
A =1
!⌘(I � ↵) (6.38)
dove:
• I e la matrice unitaria;• lo smorzamento, rispettando le convenzioni del modello SEA classico, e
espresso in termini di fattore di perdita;
6.3 Relazione tra SEA e EDA 105
• i termini della matrice ↵ sono espressi da
↵rs = �rs �P
j
P
k µjk (r)jk
(s)jk
P
j (s)jj
. (6.39)
La somma delle colonne della matrice ↵, cosı espressa, e nulla.
La matrice inversa X = A�1 pertanto puo essere scritta come
X = !⌘I + !C (6.40)
C = ⌘↵(I � ↵)�1 = ⌘(↵+ ↵2 + ↵3 + . . . ). (6.41)
Poiche e nulla la somma delle colonne della matrice ↵, allora e nulla anche lasomma delle colonne della matrice C. Inoltre, riscrivendo la matrice ↵ come
↵ = �diag
1P
j (s)jj
!
(6.42)
dove � e una matrice simmetrica cosı espressa
� =X
j
(s)jj �rs �
X
j
X
k
µjk (r)jk
(s)jk (6.43)
segue che ↵2, ↵3, . . . e quindi C nella (6.41) sono ottenuti dal prodotto di unamatrice simmetrica per una matrice diagonale, come si evince dalla (6.42).
A questo punto e possibile osservare che la matrice X trovata e costituitadalla somma di due matrici, in accordo con la formulazione SEA (6.6); inparticolare, la matrice !⌘I (diagonale) e la matrice dei coe�cienti di perditadiretta legati alla dissipazione interna; la matrice C rappresenta la matrice deicoe�cienti di perdita per accoppiamento, con elementi fuori dalla diagonaleCrs = �⌘rs. Ovviamente, a�nche la trattazione sia corretta, e necessario chegli elementi di C soddisfino la relazione di consistenza, ovvero
nrCsr = nsCsr. (6.44)
La (6.44) e verificata se il rapportoP
j (r)jj /nr e costante per tutti i sot-
tosistemi, il che significa che i modi nella banda in frequenza scelta sono taliche
(r)jj = E
⇥
(r)jj
⇤
= ⌫r (6.45)
dove (r)jj e il valore medio di (r)
jj per tutti i modi nella banda in frequenza ⌦.Pertanto, il principio di reciprocita e soddisfatto se per la banda in frequenza
⌦ scelta, il valor medio (r)jj approssima su�cientemente bene la frazione
di densita modale espressa nella (6.34): ci deve essere un numero su�cientedi modi nella banda ⌦, e la loro energia cinetica deve essere, mediamente,
106 6 I coe�cienti di influenza energetici (dai modi all’energia)
rappresentativa di tutti i modi del sistema, in termini di distribuzione di
energia cinetica attraverso il sistema. Inoltre, poiche (r)jj dipende solo dalle
deformate modali dei modi in ⌦, il principio di consistenza non e influenzatone dal livello di smorzamento ne dalle caratteristiche della giunzione tra isottosistemi.
Possiamo quindi concludere che la matrice X cosı determinata soddisfa siail principio di conservazione dell’energia che, nel caso in cui valga la (6.45),il principio di consistenza. Essendo soddisfatte le due condizioni necessariedel modello SEA, e possibile a↵ermare che la matrice X e una matrice quasi-
SEA. In generale, pero, la matrice X non soddisfa le cosiddette condizionidesiderabili, e quindi non e una matrice proper-SEA. In particolare, nellamatrice X e possibile che:
• i fattori di perdita per accoppiamento siano negativi;• i fattori di perdita per accoppiamento indiretto possano essere non nulli,
e quindi possano esserci termini Crs non nulli per sottosistemi r e s nonfisicamente accoppiati;
• i fattori di perdita per accoppiamento ⌘sr e ⌘rs dipendano sia dalle propri-eta globali dell’intero sistema, sia dalle proprieta locali dei due sottosistemi(specialmente se lo smorzamento e piccolo);
• i fattori di perdita per accoppiamento generalmente dipendano dal fat-tore di perdita per smorzamento ⌘, soprattutto se lo smorzamento esu�cientemente piccolo.
Riassumendo, il CPP vale e il sistema puo essere modellato utilizzando unapproccio quasi SEA, ma a di↵erenza del SEA classico e necessario tenere inconto anche le potenze scambiate tra sottosistemi non fisicamente collegati.Mediante un esempio numerico, riassumiamo quanto detto sinora, evidenzian-do quando i risultati di un’analisi SEA sono rappresentativi della risposta delsistema.
6.4 Esempio numerico
Consideriamo il sistema in Figura 6.3 che comprende quattro aste in lineasoggette a vibrazioni assiali. Le aste sono dello stesso materiale, e di↵erisconoper lunghezza e area della sezione trasversale. In particolare, le lunghezzesono state scelte in maniera tale che il rapporto tra le lunghezze di due astesia irrazionale. In Tabella 6.1 sono riportate le proprieta geometriche delleaste (le lunghezze sono riportate alla quarta cifra decimale).
La densita modale dell’intero sistema e ntot = 1, e quindi il fattore disovrapposizione modale e uguale al prodotto ⌘!. I modi propri del sistemasono calcolati mediante l’analisi modale.
La Figura 6.4 mostra i fattori di partecipazione modale (r)jj per i primi
cento modi propri per ogni sottosistema (j = 1, . . . , 100; r = 1, . . . , 4). Inoltre,per ogni sottosistema, la linea tratteggiata e rappresentativa del valore della
6.4 Esempio numerico 107
Tabella 6.1: proprieta geometriche delle aste (unita arbitrarie).
Asta Area Lunghezza ⌫
1 1 0.5171 0.16462 0.4 0.8885 0.28283 0.9 0.7072 0.22514 0.6 1.0288 0.3275
frazione di densita modale ⌫r. Dalle figure si nota che i (r)jj sono piu o meno
uniformemente distribuiti a seconda del sottosistema considerato, ma in ogni
caso si percepisce che il valor medio (r)jj coincide proprio con ⌫r. Tale conver-
genza non e verificata in assoluto, ma dipende dal numero di modi considerato,come mostrato in Figura 6.5.
La Figura 6.5 mostra che la media in frequenza dei fattori di parteci-
pazione (r)jj (rapportata alla frazione di densita modale ⌫r del sottosistema r
considerato) su una banda in frequenza ⌦ centrata sulla frequenza naturaledel 50-esimo modo proprio e una funzione del numero di modi contenuti nellabanda. In particolare, la media dei fattori di partecipazione tende alla frazionedi densita modale del sottosistema considerato solo se si considera un numerodi modi su�ciente (nel caso rappresentato, sono necessari almeno 10 modiper avere convergenza). Questa convergenza indica, in accordo con la (6.45),che e possibile utilizzare un approccio quasi-SEA solo qualora nella banda infrequenza considerata vi e un numero di modi su�ciente.
La Figura 6.6 mostra i fattori di perdita per accoppiamento diretto e indi-retto !nr⌘sr, in funzione di !⌘ per una banda in terzi d’ottava centrata sullafrequenza propria del 50-esimo modo proprio di vibrare. Tale banda contiene13 modi propri. Su questa banda in frequenza, la larghezza di banda half-power� = !⌘ e ritenuta costante, in modo tale che il fattore di sovrapposizionemodale non dipenda dalla frequenza. I risultati calcolati sono approssimati,in quanto, come precedentemente giustificato, sono ignorati gli e↵etti dei mo-di non risonanti in questa banda ed inoltre per il calcolo dei termini �jk eusata l’espressione approssimata (6.27) piuttosto che quella esatta. Gli erroriintrodotti da queste approssimazioni sono significativi solo per alti valori di� = !⌘, quando il valore del fattore di sovrapposizione modale diventa el-evato. In ogni caso, puo essere ancora adottato un approccio quasi-SEA. Inparticolare, dalla Figura 6.6 si osserva che:
Figura 6.3: sistema strutturale costituito da quattro aste in linea.
108 6 I coe�cienti di influenza energetici (dai modi all’energia)
• alcuni fattori di perdita per accoppiamento indiretto sono negativi, e ten-dono asintoticamente a zero per elevati valori dei fattore di sovrapposizionemodale;
• per tutti i coe�cienti di accoppiamento (sia diretto che indiretto) valel’uguaglianza !nr⌘sr = !ns⌘rs, ovvero vale il principio di consistenzarichiesto da un approccio SEA.
Figura 6.4: fattori di partecipazione (r)jj (+) per i primi 100 modi propri e (-
- -) frazione di densita modale ⌫r per le quattro aste.
6.4 Esempio numerico 109
Da quanto detto, si puo evincere che e possibile passare da un modelloEDA ad un modello SEA quando:
• il valore del fattore di sovrapposizione modale e elevato;• la banda in frequenza ⌦ su cui sono calcolati i valori medi deve contenere
un numero su�ciente di modi.
Pertanto, i risultati statistici ottenuti da un approccio SEA sono rappre-sentativi della risposta dell’intero sistema strutturale solo se sono valide lecondizioni suddette.
Figura 6.5: andamento della media in frequenza del fattore di partecipazione
(r)jj , rapportato alla frazione di densita modale ⌫r, in funzione del numero di
modi presenti nella banda.
110 6 I coe�cienti di influenza energetici (dai modi all’energia)
Figura 6.6: fattori di perdita per accoppiamento diretto e indiretto !nr⌘srfunzione del fattore di sovrapposzione modale !⌘.
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
Author's personal copy
Letter to the Editor
Structural similitudes for the dynamic response of plates and assemblies of plates
a r t i c l e i n f o
Keywords:Structural similitudeEnergy distribution approachScaling laws
a b s t r a c t
A structural similitude is proposed for the analysis of the dynamic response of plates orassemblies of plates. The similitude is defined by invoking the energy distributionapproach which allows the representation of all the fundamental parameters. Then, thesimilitude laws are defined by looking for equalities in the structural responses. Twotest cases are herein discussed: the first involves a single plate response and the secondis related to an assembly of two plates. Only the bending waves are taken into account.If the original damping values are kept, a complete similitude is defined in both thecases which allows to enlarge or reduce independently the plate surfaces and thethickness. An approximate similitude is defined if the damping is modified: in this caseonly a mean response can be predicted in similitude.
& 2010 Elsevier Ltd. All rights reserved.
1. Introduction
It is well-known that the possibility to transport the same engineering problem in different scales can offer severaladvantages. Thinking only to the geometry, a very small object could be investigated in a scale larger than the original one,so making easy the location of a given set of sensors. On the contrary, very large structural components can be analysed ina standard laboratory by using a concentrated set of excitation and acquisition instrumentation and with small surfaces tobe controlled.
The theory of the models and the analysis of the possible similitudes and analogies is a very large branch ofthe engineering literature and cannot be replicated here. An interesting summary of the similarity conditions betweena full-scale model and a scaled one, by using the modal approach, is given in [1], with specific reference to dynamicresponse. A more general view of the problem is in [2], even if the main textbooks about this subject are the workin [3,4].
The approach of the similitudes between models is largely used in the aeroelastic tests where, during the wind tunnelmeasurements, the aircraft component is designed to represent the same natural frequencies or flutter speed and/or thewind-tunnel data have to be correlated to the flight-test ones, [5].
The relationships among mode shapes, natural frequencies, damping loss factors and energies are in [6] where theenergy distribution approach (EDA) is introduced. EDA was specifically used in order to predict the original and scaledresponses of linear dynamic systems, [7–9]. In detail, some investigations for a simple plate are in [7], and the extension totwo plates is in [8]; the scaling between structural components with different modal density (a beam coupled with a plate)is introduced in [9]. The configurations were very simple but the results were very attractive when comparing them tothose obtainable with large finite element models.
In the present work, the idea is to enlarge the number of parameters in order to generate a complete similitude and toset-up similitude laws for some coefficients able to represent some of the items to be investigated.
The adopted approach would formally invoke the process of full dimensional analysis, [3], but here it is preferred towork with the energy distribution approach (EDA) that allows the investigation of a dynamic system via the modes andnatural frequencies in order to determine the power input and the energy associated to each subsystem.
The work, after these introductive remarks, presents in Section 2 a summary of EDA. This approach is then used todefine a similitude with a parent model tailored for representing some specific items under observation. Section 3 containsthe numerical investigations concerning the dynamic response of a simple bending plate and an assembly of two bendingplates.
Contents lists available at ScienceDirect
journal homepage: www.elsevier.com/locate/jnlabr/ymssp
Mechanical Systems and Signal Processing
0888-3270/$ - see front matter & 2010 Elsevier Ltd. All rights reserved.doi:10.1016/j.ymssp.2010.10.004
Mechanical Systems and Signal Processing 25 (2011) 969–980
Author's personal copy
Despite their simplicity, the results show promising applications of the proposed similitude laws.
List of symbols
AEIC energy influence coefficient matrixA surface area of the plateAEIC
rs rsth member of the AEIC matrixcB bending wavespeedE energy vectorE Young modulef(P, t) excitation function of space, P, and time, th plate thicknessiu imaginary unitmgen generalized massn modal densityNM number of modesNP number of points of the graph (frequency resolution of the response)NS number of subsystemsPinput power input vectorPin
(r) power input to the rth subsystemSf spectral density force functionT(r) kinetic energy of the rth subsystemt time variablex spatial coordinate vectorGjk modal operator between jth and kth moded Dirac d- functionZ damping loss factorm modal overlap factorn Poisson moduler mass densityfj jth eigenvectorcjk modal spatial operator between jth and kth modeO generic frequency intervalo radian excitation frequencyoj jth eigenvalue
2. The energy distribution approach (EDA)
EDA is here recalled in order to define a similitude between original and scaled models.
2.1. Some remarks on EDA
A structural (or structural-acoustic) dynamic model can be assembled by using a deterministic model based on its modeshapes and natural frequencies. This model can be now named as original.
EDA allows using the eigensolutions (natural frequencies and global mode shapes) in order to obtain the distribution ofenergy in each subsystem. The structural subsystem is defined as a spatial domain characterised by specific waves. Thesystem can be thought as an assembly of NS subsystems in which NM modes are resonating at each excitation frequency.Then, using EDA, it is possible to estimate the energy unknown vector, E, for a given power input vector, Pinput; this is doneevaluating the energy influence coefficient matrix, AEIC:
E!AEICPinput, "1#
with
AEICrs !
Pj
PkGjkc
"s#jk c"r#jkP
jZjojGjjc"s#jj
withr,s 2 f1, . . . ,NSgj,k 2 f1, . . . ,NMg : "2#
Eq. (1) is directly evaluated by using a modal expansion theorem. Therefore, it is an exact relationship representing anenergy balance. The use of an analytical relationship strengths the successive mathematical derivation instead of an energybalance equation based on the SEA formulation.
Letter to the Editor / Mechanical Systems and Signal Processing 25 (2011) 969–980970
Author's personal copy
The energy response is defined in terms of some global parameters which depend on the modal properties of thesystem. The spatial coupling parameter for the generic rth subsystem is the following:
c!r"jk #Z
x2rr!x"fj!x"fk!x" dx: !3"
This term depends on the global mode shapes acting within the rth subsystem: specifically, the c!r"jk term measures thegeneralised work inside the rth subsystem due to interaction between the jth and kth modes. The modes can be consideredlagrangian coordinates and then the c!r"jk term expresses the work of the generalised force (represented by the jth mode) forthe generalised displacement (represented by the kth mode).
The global mode shapes are considered mass-normalised and then the cjk terms are dimensionless. Further, for a singlesystem, the only non-zero terms are the cjj thanks to the well-known orthogonality property.
The frequency dependent members are here recalled:
Gjk #1
4O
Z
o2Oo2Re
1
o2j $o2% iuZjo2
j
!1
o2k$o2% iuZko2
k
!" #do: !4"
The frequency response operators can be approximated, [6]:
Gjj&1
8Op
Zjoj, !5"
Gjk&p
16O!oj%ok"
2!Zjoj%Zkok"
!o2j $o2
k "2%!Zjo2
j %Zko2k "
2: !6"
The term O represents a generic frequency band in which the system response is interrogated for a given excitation.Two approximations can be invoked: they are named large and small terms. The first represents the situation in which
two modes well-overlap !o2j &o2
k "; the second is associated to the case in which two modes do not well-overlap,!o2
j $o2k "
2b!Zjo2j %Zko2
k "2. In the next section, both will be explicitly expressed when dealing with the similitude.
It has to be further noted that in EDA, (i) the loading was assumed to be proportional to mass density with zero cross-spectral density Sf, [6], and then (ii) being Sf represented by the dimensional product of a squared force by a velocity!F2LT$1".
The expressions of the input power to the sth subsystem and the kinetic energy for the rth subsystem complete thedynamic set for the analysis:
P!s"IN # 2Sf
X
j
2ZjojGjjc!s"jj , !7"
T!r" # 2Sf
X
j
X
k
Gjkc!s"jk c
!r"jk : !8"
The full development and complete set of equations are in [6].
2.2. Definition of the similitude
As announced, a full dimensional analysis is outside the aims of the present work. Here, it is intended to represent thefundamental variation of the few parameters that allow building an useful similitude. This similitude must be able torepresent the dynamic response. The scaled model will be different from the original one: some of the parameters areincreased, others will be reduced. It is expected to find the similitude laws for the selected parameters.
This work is based on the following choices:
' The models under investigations are represented by bending plates.' It is assumed that the material of the plates does not change: any variation of this can be interpreted as a variation in
the distribution of the natural frequencies. For a generic assembly there is the possibility, in principle, of changing thematerial of each plate. This choice enlarges the possibility of getting the same results with different similarconfigurations, but it has been preferred to neglect the possibility to introduce this parameter, too, in order to keep theanalysis as simple as possible. It is also easy to consider that in an experimental laboratory, the variation of thedimensions is a step easier than to change the material.' The plates are excited by concentrated harmonic forces, f !P,t" #F!o"d!P"e$iuot .' The structural damping is such that the system response can be obtained by using the real mode shapes and undamped
natural frequencies: more complicated models, based on the complex mode shapes, do not add further contributions tothe present developments and results.
Letter to the Editor / Mechanical Systems and Signal Processing 25 (2011) 969–980 971
Author's personal copy
The field of investigation is restricted to the analysis of the values of area, A, thickness, h, damping, Z and forces, F, sinceit is further assumed that F!o" # F. The overline will always denote the scaled items. Then, a similitude is searched withthis set:
rA #AA
, rh #hh
, rF #FF
, rZ #ZZ : !9"
It is assumed that the global mode shapes, after imposing the similitude, remain unaffected:
fj #fj: !10"
As consequence, one gets that the scaled spatial coupling parameters are equal:
c!r "jk #
Z
x2rr!x"fj!x"fk!x" dx#
Z
x2rr!x"fj!x"fk!x" dx#c!r"jk : !11"
Having assumed to work with bending plates, the natural frequencies are modified with the parameter ro, beingro # rh=rA.
The scaled auto and cross-modal frequency response operators are here defined:
Gjj$p
8OZjo j#
p8O!ZjrZ"!ojro"
#Gjj1
rZro, !12"
Gjk$p
16Or3orZ!oj%ok"
2!Zjoj%Zkok"
r4o!o2
j &o2k "
2%r4or2
Z!Zjo2j %Zko2
k "2: !13"
These cross terms cannot be directly posed in similitude: the quantities involved are different functions of the scalingparameters defined for the natural frequencies and for the modal damping. The approximations before introduced are hereused: they are named large and small terms.
The situation in which two modes well-overlap !o2j $o2
k " is as follows:
G!large"jk $
p16O!oj%ok"
2!Zjoj%Zkok"
!Zjo2j %Zko2
k "2
1rZro
, !14"
whereas if the two modes do not well-overlap, !o2j &o2
k "2b!Zjo2
j %Zko2k "
2:
G!small"jk $
p16O!oj%ok"
2!Zjoj%Zkok"
!o2j &o2
k "2
rZro: !15"
Then, the scaled auto and cross modal large and small terms are, respectively:
Gjj #1
rZroGjj, !16"
G!large"jk #
1rZro
G!large"jk , !17"
G!small"jk #
rZro
G!small"jk : !18"
It is evident the effect of a given modification of the damping between the original and scaled models. The role of thecross-modal terms is not exactly reproduced if rZa1, even for the same distribution of the natural frequencies. This wasalready studied and discussed for a number of cases in which scaled finite element models were obtained just increasingthe original damping value, [8], in order to reduce the computational efforts.
According to the choice of scaling parameters, the excitation can be scaled, [6]:
Sf # Sfr2
F
rmass, !19"
being
rmass # rArh: !20"
For the sake of completeness, it is useful to derive all the remaining parameters of the EDA with the scaling procedure:
P!s"IN # 2Sf
r2F
rmass
X
j
1rorZ
Gjj
! "!c!s"jj " # P!s"IN
r2F
rmass, !21"
Letter to the Editor / Mechanical Systems and Signal Processing 25 (2011) 969–980972
Author's personal copy
T!r"#2Sf
r2F
rmass
X
j
X
k
1rorZ
Gjk
! "!c!s"jk "!c
!r"jk " $ T !r"
r2F
rmassrorZ: !22"
The scaled energy coefficients are
Ars $Ars
rorZ: !23"
Rather than discuss the overall development, it is here preferred to apply the scaling procedure to simple test cases inwhich the effect of the several parameters can be easily analysed and discussed.
3. Numerical test cases
Table 1 reports the results of the most important parameters for the plate response (or an assembly response) in termsof the given set of parameters.
3.1. The response of a single plate
A single plate undergoing bending vibration is considered. It is rectangular with simply supported edges and made of anhomogeneous material; it is located in the xy-plane of generic Oxyz reference system.
The analytical modal frequency response, the structural velocity at the point R(xR; yR), is here recalled for a mechanicalexcitation acting at the point S(xS;yS):
v!o; S,R" $iuoF!o"
mgen
X
j
fj!S"fj!R"!o2
j %o2"& iuZo2j
: !24"
The symbol mgen denotes the plate generalised mass. The natural radian frequencies can be obtained from the relation:
oj $
########################Eh2
12r!1%n2"
spjx
Lx
! "2
&pjy
Ly
! "2" #
, !25"
and the mode shapes are given by
fj!S" $ sin jxpxS
Lx
! "sin jyp
yS
Ly
! ": !26"
The jth mode is mapped into wavenumber space with the two associated integers jx and jy. It is very simple to checkthat the scaled response can be written as follows:
v!o; S,R" $rF
rmass
iuoF!o"mgen
X
j
fj!S"fj!R"!o2
j r2o%o2"& iuZo2
j !r2orZ"
; !27"
Table 1Derived parameters for single plates or assemblies of plates.
Natural frequencies later defined ro $ rh r%1A
Bending wavespeed cBph!1=2" rc $ r1=2h
Mass mpAh rmass $ rh rA
Modal densitynp
Ah
rn = rh%1 rA
Modal overlap factor mpnZ rm $ r%1h rArZ
Frequency terms Eq. (16) rG ' r%1h rAr%1
ZEq. (17) rG ' r%1
h rAr%1Z
Eq. (18) rG ' r%1h rArZ
Spectral density Eq. (19) rS $ r%1h r%1
A r2F
Energy Eq. (22) rT $ r%2h r%1
Z r2F
Square velocityv2p
Tm
rsv $ r%3h r%1
A r%1Z r2
F
Letter to the Editor / Mechanical Systems and Signal Processing 25 (2011) 969–980 973
Author's personal copy
the modified natural frequencies are
oj !
!!!!!!!!!!!!!!!!!!!!!!!!Eh
2
12r"1#n2$
vuut pjx
Lx
" #2
%pjy
Ly
!22
4
3
5!ojrh
rA"28$
From Eqs. (27) and (28), it descends that only for rh = rA the scaled plate will work with the same eigensolutions as theoriginal ones. To get exactly the same local response, it has to be verified that rZ ! 1 and rF ! rmass ! rhrA: this choice isunique, if only the area and the thickness are modified.
Figs. 1 and 2 illustrate the local behaviour of the dynamic response (modules of the local velocity) for two scaledmodels. In Fig. 1, the plate is larger and thicker than the original one; in Fig. 2, the similitude procedure leads to a reductionof both plate surface and thickness. On the right side of each figure, the complete set of parameters is reported: this is alsoreported in Table 2.
Fig. 1. Single plate response (I-A) for a generic couple of source–receiver points: velocity (m/s) vs. frequency (Hz).
Fig. 2. Single plate response (I-B) for a generic couple of source–receiver points: velocity (m/s) vs. frequency (Hz).
Letter to the Editor / Mechanical Systems and Signal Processing 25 (2011) 969–980974
Author's personal copy
The variation of the damping changes the response amplitude, Fig. 3, as expected; there, the variations of the rh and rA
are still such that the natural frequencies are kept: this is true in all the frequency range. The real poles of the system arekept while the amplitudes are reduced in this case of augmented damping.
Even keeping the same material, a plate larger or smaller than the original one can be used for numerical modellingand/or for experimental purposes with the obvious advantages that each configuration can allow.
Variations of the thickness and the area such that rharA, lead to a modification of the distribution of the naturalfrequencies, Figs. 4 and 5. In both figures, the top parts present the results of the simple numerical interrogations of theoriginal and scaled models, while in the bottom ones, the re-modulated responses are shown.
Specifically, the curves referring to the similitude responses are plotted as follows:
! the frequency axis is oro;! the velocity axis presents the quantity v
!!!!!!!!!!!rh=rA
p.
Having defined a similitude according to the content of the Table 1, it is always possible to switch from a representationto another according to the scaling laws of the involved parameters. This step can be performed by modifying both the axesand thus by invoking the similitude in the reversal direction.
The test presented in [7] is a particular one obtained with: rh=1, rA " b, rZ " b#1, rF=1 and then rsv = 1. The symbol bdenotes a scaling coefficient, with bo1; all the analysis was made in terms of a given variation of b. There, the presentedresponses were not re-modulated since a reduction of the computational costs was pursued.
It has to be noted that in the Figs. 1–5, the source and the receiver points are acting in the same dimensionless locations.The results are presented by using NP points for each graph and the frequency range of analysis is the half of the naturalfrequency of the last natural mode.
The actual results allow the definition of a complete similitude, if rZ " 1. The similitude is approximate if rZa1: in such acase only a mean response can be replicated, as already shown in [7].
Table 2Configurations for the single plate response.
# rZ rA rh rF ro rmass
I-A 1 4 4 16 1 16I-B 1 0.4 0.4 0.16 1 0.16I-C 2 0.4 0.4 0.226 1 0.16I-D 1 0.7 0.5 0.296 0.714 0.35I-E 2 0.5 1.0 1 2 0.5
NP=300, NM=850, Z" 0:03. A=1.05, h=0.002, F=1.
Fig. 3. Single plate response (I-C) for a generic couple of source–receiver points: velocity (m/s) vs. frequency (Hz).
Letter to the Editor / Mechanical Systems and Signal Processing 25 (2011) 969–980 975
Author's personal copy
3.2. The response of a two plates assembly
This configuration is reported in [8] and involves two rectangular plates in which only bending waves are allowed totravel. Along the common side, a pinned connection is assumed, thus allowing the continuity of the rotations and imposingnull displacements; then an analytical solution can be obtained in terms of uncoupled mode shapes; the detail is not givenhere, Fig. 6.
The results coming from the classical modal analysis, (CMA), are thus compared with those predicted by the statisticalenergy analysis (SEA), [10], and by invoking the similitude.
A further hypothesis is now necessary, since one has to work with plate 1 and 2; it is assumed that the similitudecoefficients, r, are the multiplier of each vector of parameters:
h1
h2
( )! rh
h1
h2
( ),
A1
A2
( )! rA
A1
A2
( ),
Z1
Z2
( )! rZ
Z1
Z2
( ),
F 1
F 2
( )! rF
F1
F2
( ): "29#
Fig. 4. Single plate response (I-D) for a generic couple of source–receiver points: velocity (m/s) vs. frequency (Hz); (a) direct response, (b) similituderesponse.
Letter to the Editor / Mechanical Systems and Signal Processing 25 (2011) 969–980976
Author's personal copy
The similitude involves all the parameters in the same way; clearly, it is possible to study also the case in which each ofthe parameters, belonging to the given plate, is scaled independently, but this falls outside the aims of the present work.
The terms in Eq. (13) are the problem of any scaling choice since the Gjk do not scale as the Gjj and further, by invokingthe approximations it was shown that the terms G!small"
jk scale with different combination of ro and rZ if compared withG!large"
jk .Again, a complete similitude can be obtained only by using rZ # 1.Here, the mean square out-of-plane velocities, W1 and W2, of each plate are investigated as results of an average over
three mechanical driving points on the first plate.The results of a complete similitude are given in Figs. 7 and 8, whereas Fig. 9 presents those coming from an
approximate similitude: the latter approach was named asymptotic scaled modal analysis, [8]. Again, all the results arepresented by using NP points for each graph and the frequency range of analysis is the half of the natural frequency of thelast resonating mode. Table 3 presents a summary of the analysed configurations.
Fig. 5. Single plate response (I-E) for a generic couple of source–receiver points: velocity (m/s) vs. frequency (Hz); (a) direct response, (b) similituderesponse.
Letter to the Editor / Mechanical Systems and Signal Processing 25 (2011) 969–980 977
Author's personal copy
4. Concluding remarks
The structural similitude herein presented and discussed with analytical models, allows reproducing the local responseof plates for any given choice of area, rA, and thickness, rh. This leads to the definition of similar plates in which the onlyparameter to be evaluated is the excitation level, rF. It is always possible to switch from the original model to the parentone and to perform the reversal step, if the similitude is complete.
Specifically, in the present work the distribution of the altered natural frequencies is represented by ro ! rh=rA, whilethe cost of the simulation of the bending wavelength is r"1
o ! rA=rh. The scaled model presents only in principle a reductionof the computational costs since the re-modulation of the frequency axis requires the evaluation of an increased number ofmodes resonating in a frequency range wider than the original one.
The only way to reduce the computational costs is to work by accepting the modification of distribution of the naturalfrequencies, and then a variation of the damping can be accordingly defined in order to get the mean square response. Thiscan be done in the frequency range dominated by the high values of the modal overlap factors. In this case, one will workwith an approximated similitude: it was named ASMA, asymptotic scaled modal analysis, [8].
Fig. 6. Sketch of the two plates assembly.
Fig. 7. Two plates assembly (II-A): mean square velocity (m2/s2) vs. frequency (Hz).
Letter to the Editor / Mechanical Systems and Signal Processing 25 (2011) 969–980978
Author's personal copy
From an experimental point of view, the defined similitude offers numerous advantages since, in case of the completeone, all the dynamic items (natural frequencies, mode shapes and modal response) can be easily reproduced on thedesired scale.
Fig. 8. Two plates assembly (II-B): mean square velocity (m2/s2) vs. frequency (Hz).
Fig. 9. Two plates assembly (II-C): mean square velocity (m2/s2) vs. frequency (Hz).
Letter to the Editor / Mechanical Systems and Signal Processing 25 (2011) 969–980 979
Author's personal copy
Further steps will involve the adoption of finite element models and experimental measurements in order to face withmore realistic assemblies.
References
[1] J. Wu, Prediction of the dynamic characteristics of an elastically supported full-size plate from those of its complete-similitude model, Computersand Structures 84 (2006) 102–114.
[2] P. Kroes, Structural analogies between physical systems, British Journal for the Philosophy of Science 40 (1989) 145–154.[3] E. Szucs, Similitude and Modelling, Elsevier Science Ltd, 1980, ISBN:0444997806.[4] S.J. Kline, Similitude and Approximation Theory, Springer-Verlag, 1986, ISBN:0387165185.[5] C.H. Wolowicz, J.S. Bowman, Jr., W.P. Gilbert, Similitude requirements and scaling relationships as applied to model testing, NASA Technical Paper
14–35, 1976.[6] B.R. Mace, Statistical energy analysis, energy distribution models and system modes, Journal of Sound and Vibration 264 (2003) 391–409.[7] S. De Rosa, F. Franco, A scaling procedure for the response of an isolated system with high modal overlap factor, Mechanical Systems and Signal
Processing 22 (2008) 1549–1565.[8] S. De Rosa, F. Franco, On the use of the asymptotic scaled modal analysis for time-harmonic structural analysis and for the prediction of coupling loss
factors for similar systems, Mechanical Systems and Signal Processing 24 (2010) 455–480.[9] S. De Rosa, F. Franco, T. Polito, Analysis of the short and long wavelength coupling through original and scaled models, in: NOVEM 2009, Noise and
Vibration: Emerging Methods, Keble College, Oxford (UK), April 2009, paper No. 28.[10] R.H. Lyon, R.G. De Jong, Theory and application of statistical energy analysis. Butterworth-Heinemann, ISBN: 0750691115, 1995.
S. De Rosa !, F. Franco, T. Politoælab, Vibrations and Acoustics Laboratory, Department of Aerospace Engineering, Universit !a degli Studi di Napoli ‘‘Federico II’’,
Via Claudio 21, 80125 Napoli, ItalyE-mail address: [email protected] (S. De Rosa)
12 April 2010
Available online 14 October 2010
Table 3Configurations for the assembly of two plates NP=150, AT=(0.198, 0.162), FT=(1,0).
# NM Z h rZ rA rh rF
II-A 135, 108 0.03, 0.03 0.001, 0.003 1 0.2 0.2 0.04II-B 570, 456 0.05, 0.05 0.001, 0.005 1 0.5 3 3.674II-C 400, 320 0.05, 0.01 0.005, 0.001 2 0.5 1 1
! Corresponding author.
Letter to the Editor / Mechanical Systems and Signal Processing 25 (2011) 969–980980
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
Waveguides of a Composite Plate by using the
Spectral Finite Element Approach
E. Barbieri
⇤
Department of Mechanical Engineering
University of Bath, BA2 7AY Bath UK
A. Cammarano, S. De Rosa, F.Franco
ælab - Vibration and Acoustics Laboratory
Dipartimento di Ingegneria Aerospaziale
Universita’ degli Studi di Napoli Federico II
80125 Via Claudio, Napoli
September 27, 2007
Abstract
This work presents the extension of an existing procedure for evalu-
ating the waveguides and the dispersion curves of a laminate made up of
thin orthotropic composite plate arbitrarily oriented. The adopted ap-
proach is based on one-dimensional finite-element mesh throughout the
thickness. Sti↵ness and mass matrices available in literature for isotropic
material, are here reported in full expanded form for the selected prob-
lem. The aim of the work is the development of a tool for the simulation
of the most common composite materials. The knowledge of the wave
characteristics in a plate allows the correct sizing of the numerical mesh
for the frequency dependent analysis. The development of new sti↵ness
matrices and the analysis for di↵erent heading angles are here detailed
for taking into account the general anisotropic nature of the composite.
The procedure concerns a standard polynomial eigenvalue problem in the
⇤Corresponding Author: [email protected]
1
wavenumber variable and is focused on the evaluation of the dispersion
curves for all the propagating waves within the materials. A comparison
with an analytical approach is also shown in the results using the Classi-
cal Laminate Plate Theory (CLPT). However limits of CLPT are outlined
and SFEM can be successfully used to overcome such limitations.
Keywords : waveguides dispersion composite plate wavenumber modal
density
PACS : 43.20.Bi 43.40.Dx 43.20.Mv
1 Introduction and Statement of the Problem
The wide and increasing use of innovative materials in the transportation engi-
neering is one of the most fascinating challenges of the material science. In the
aerospace field, this challenge can be defined as always open since the manufac-
turers are continuously looking for sti↵er, robust, long-life and lighter structural
components. The need of such material performances has driven for a long time
the attention to the fiber-reinforced composite materials and now they are a
standard in several fields of transportation engineering design. One of the main
problem of these innovative materials is their vibroacoustic behavior, since some-
times the lightness requirement is in conflict with the acoustic target. Hence,
in the design phase there is the need of simulating the dynamic behavior of
innovative materials. This target can be obtained by using the deterministic
methods, (Cook et al., 1989), and energy ones, (Lyon, 1975). The deterministic
techniques, such as the Finite Element Analysis (FEA), work by discretising the
given wavelength. In principle, they can be used for evaluating the response at
any excitation frequency, but the computational cost (CPU time) can become
easily unacceptable. In absence of any analytical development, the determinis-
tic techniques model directly the wavelength, by assigning at least five solution
2
points (four elements) for each complete wave (ref.(Cook et al., 1989) and (Cre-
mer et al., 2005)). For increasing excitation frequency, the response becomes
global, that is any quadratic mean can represent the overall behavior, and the
possibility to discriminate the dynamic response among di↵erent points in space
is lost. The best technique working under these conditions is the well-known
Statistical Energy Analysis (SEA), ref.(Lyon, 1975). In (Ghinet et al., 2005) for
example, a SEA method for the transmission loss of sandwich shells is illustrated,
in which the dispersion properties of laminates are exploited. (Finnveden, 2004)
studied the waveguides in thin-walled structures with a finite element formula-
tion in order to compute group velocity and modal density as input to a SEA
model. Wave propagation in laminated composite plates and rods (Baz, 2000),
has been treated in depth by numerous authors in the past. (Datta et al., 1988)
have applied a sti↵ness method for a laminate made of transversely isotropic
laminae, while in (Nayfeh, 1991) dispersion curves for anisotropic laminates are
analitically extracted by the means of the transfer matrix method. A similiar
method can be found in (L. Wang, 2007) for the evaluation of the group velocities
and their applications in nondestructive techniques. (Chitnis et al., 2001) used
a higher-order theory displacement based formulation. In-plane elastic waves
in composite panel are investigated in (Zak et al., 2006) with a spectral finite
element approach in the time domain. (Birgersson et al., 2004) also used spec-
tral approach for modelling turbulence-induced vibration in pipes. In FEA, the
knowledge of the wavelength is absolutely mandatory for proceeding with the
mesh sizing and for selecting the proper elements; in SEA, detailed information
about the group velocity and the modal density are necessary for the charac-
terization of the specific subsystem and for later moving to analyze the energy
exchange through a wave approach. The wavenumber function vs. the excitation
frequency, (dispersion curves) for each structural wave contains the subsystem
3
properties. Very recently two authors stressed this point with great attention
(Shorter, 2004),(Mace et al., 2005). (Shorter, 2004) proposed an e�cient ap-
proach for simulating an infinite flat plate, in which a low-cost one-dimensional
finite element was used for simulating the propagating waves inside the ma-
terials. Further, (Mace et al., 2005) proposed to use directly a finite element
model assembled for evaluating the modal response for getting the dispersion
curves. Two dimensional approaches are also present in literature, (Johnson
and Kienholz, 1982), and the work by (Heron, 2002) has to be considered as
one of the first addressing the problem of the dynamic response of a generic
laminate. An extensive analysis of the related literature is reported in (Shorter,
2004). Nevertheless, it is worth mentioning the applications of spectral finite
elements in wave propagation for laminates, for example (Roy Mahapatra and
Gopalakrishnan, 2003),(Mahapatra et al., 2006),(Chakraborty and Gopalakr-
ishnan, 2006) in the frequency domain, whereas a time-domain based spectral
element with high order shape functions are used in (Kudela et al., 2007). The
present work is a straight extension of the approach proposed by (Shorter, 2004).
A one dimensional finite element model is developed for a generic plate made
by a laminate composite. The approach in (Shorter, 2004) assumes an isotropic
stress-strain relationship through the use of two independent variables for each
material. In the present work the proper sti↵ness and mass matrices are de-
veloped for each lamina introducing a local reference system, and the whole
laminate is assembled in a global reference system. At that point a Spectral
Finite Element Approach is used (SFEA), (Shorter, 2004),(Mace et al., 2005).
The spectral term refers to the fact that the method is based on the wavenum-
ber at a given excitation frequency rather than the classical analysis of natural
frequencies. The SFEA used here is the same presented in (Shorter, 2004): a
full three-dimensional displacement field within the laminate with 1D elements.
4
In the present development, a 3D orthotropic stress-strain relationship is used,
(Jones, 1999), together with the proper transformation from the local reference
system (lamina) to the global one (laminate). The problem for an homogeneous,
isotropic plate is given in the section 2. While the dispersion properties of a
homogeneous plate are indipendent from the heading angle � , for a generic
composite plate this is not true because of its anisotropic nature. Indeed, in an
2D orthotropic material for example, named x and y the principal directions of
elasticity, being Ex 6= Ey, the wavenumber at a fixed frequency changes with
the angle from x to y according to an elliptic pattern. Then, if an isotropic
plate is considered, that pattern is circular. In section 3 an analytic formulation
for a thin composite plate is derived, following the assumptions of the classical
laminate plate theory (CLPT) (Jones, 1999). A displacements 3D free wave is
then imposed to the thin plate leading to a polynomial eigenvalue problem in
k where k is the wavenumber. Bending, shear and longitudinal waves can be
easily identified from the resulting equations. Further, a spectral finite element
method (SFEM) will be used for getting the dispersion curves for a generic
composite plate and then compared to the analytical approach. These results
are showed in section 6 in form of polar patterns at fixed frequency and spectra
at fixed heading angle. The section 4 is devoted to the overall development of
the required SFEM matrices. The section 5 is centered on the solution of the
characteristic equation, and the results are presented in section 6. These results
are for both an homogeneous and a composite plates. The work has been con-
cluded in section 7 where some considerations are given about the validity of the
CLPT. It is there demonstrated how the present numerical method can work
with any configuration, overcoming the limitations of the standard theoretical
models.
5
2 The homogeneous plate
A uniform thin and flat plate is here considered, made of an homogeneous
material. From classical thin plate theory, (Leissa, 1993), it is well known that
three waves will propagate in the material of thickness h: longitudinal, shear
and bending waves. Each of these is associated with the respective wavenumber
kl, ks and kb:
k2
l =(1� ⌫2)⇢
E!2 k2
s =2(1 + ⌫)⇢
E!2 k4
b =12(1� ⌫2)⇢
Eh2
!2 (1)
It has to be noted in the Equation 1 the presence of longitudinal wave speed,
Cl(!)2 = E⇢(1�⌫2
)
, the shear wave speed, Cs(!)2 = E2⇢(1+⌫)
, and the plate bend-
ing sti↵ness D = Eh2
12⇢(1�⌫2)
. The generic group velocity and the wave length for
each wave can be defined by using the definition:
Cg =@!
@kg; � =
Cg
f(2)
and the modal density for a plate of area A (ref. (Lyon, 1975) )
ng(!) =A
2⇡2
k(!)cg(!)
(3)
By using these relationships, any information for a predictive methodology,
deterministic or energetic, can be get. In fact, the mesh of the predictive finite
element model could be designed to work up to a given excitation frequency.
The model will be completed with the boundary conditions. For the energy
methods all is known about the plate, for given material and dimensions. Both
the predictive models have to be completed with the damping information. In
the next paragraphs, a finite element method (SFEM) will be used for getting
the dispersion curves for a generic composite plate and then compared to the
6
analytical approach.
3 Analytical Structural Waveguides for a Thin
Composite Plate
According to the assumptions of the classical thin plate theory, in a plane stress
problem, the following equations of equilibrium can be written (Timoshenko
and Goodier, 1970)@Nx
@x+
@Nxy
@y� ⇢su = 0 (4)
@Nxy
@x+
@Ny
@y� ⇢sv = 0 (5)
@2Mx
@x2
+@2My
@y2
+ 2@2Mxy
@x@y� ⇢sw = 0 (6)
where Nx, Ny, Nxy are shearing forces per unit length and Mx My bending
moments per unit length and Mxy twisting moments per unit length, while ⇢s
is the surface mass density. For a composite plate, the following relationships
between forces - moments and strain - curvatures can be estabilished (Jones,
1999)
N = A✏0 + B (7)
M = B✏0 + D (8)
where ✏0 are the strains of the middle plane
✏0 =
2
66664
✏x
✏y
✏xy
3
77775=
2
666666664
@u
@x
@v
@y
@u
@y+
@v
@x
3
777777775
(9)
7
and are the curvatures of the middle plane
=
2
66664
x
y
xy
3
77775=
2
666666664
�@2w
@x2
�@2w
@y2
�2@2w
@x@y
3
777777775
(10)
The following 3D displacements wave is assumed to propagate along the plate
2
66664
u(x, y, t)
v(x, y, t)
w(x, y, t)
3
77775=
2
66664
U
V
W
3
77775ej[k(cos(�)x+sin(�)y)�!t] (11)
where � is the heading angle of the wave, u,v and w are respectively the dis-
placement fields in the x,y and z axis, whereas U ,V and W are the respective
magnitudes of the propagating wave. Substituting equations (7), (8), (10), (9)
in (4), (5) and (6) and with the assumed displacements field (11), the following
polynomial eigenproblem in k is obtained
2
66664
�k2LT AL jk3LT BP
�jk3PT BL �k4PT DP
3
77775
2
66664
U
V
W
3
77775+ ⇢s!
2I
2
66664
U
V
W
3
77775= 0 (12)
where
L =
2
66664
cos(�) 0
0 sin(�)
sin(�) cos(�)
3
77775(13)
PT =
cos2(�) sin2(�) 2 sin(�) cos(�)�
(14)
8
If a symmetric laminate is considered, then B = 0 and the polynomial problem
(12) can be de-coupled in the following 2 eigenproblems
�k2LT AL
2
64U
V
3
75 + ⇢s!2I
2
64U
V
3
75 = 0 (15)
�k4PT DP W + ⇢s!2W = 0 (16)
It can be seen from the equation (15) that, being coupled shear-longitudinal
waves, k / ! while from equation(16) for the flexural wave follows that k /p
!.
Indeed, from equation (16) directly derives that the flexural wavenumber is
kf (�, !) = 4
r⇢s
PT DPp
! (17)
For the equation (15), if ⇠l and ⇠s are the two eigenvalues of the matrix LT AL,
then
ks(�, !) =r
⇢s
⇠s(�)! ke(�, !) =
r⇢s
⇠e(�)! (18)
Using equation (2), the group velocities can be easily evaluated
Cf = 2 4
sPT DP
⇢s
p! Cs =
s⇠s(�)⇢s
Ce =
s⇠e(�)⇢s
(19)
4 Assembly of Matrices
4.1 Variational Formulation
With the intent of estabilish a finite element model, the Hamilton’s principle is
used
�
Z(T + U)dt
�= 0 (20)
9
where T is the kinetic energy and U is the strain energy. If a time average over
a period is considered, then
T =12
Z
⌦
dH ⇢ d d⌦ (21)
where d is the displacements field, ⇢ is the mass density and the superscript H
means hermitian
U =12
Z
⌦
eH s d⌦ =12
Z
⌦
eH Cx�y e d⌦ (22)
where e is the vectorized strain tensor and s is the vectorized stress tensor in
the laminate reference system, Cx�y is the stress-strain relationship matrix in
the laminate reference, ⌦ is the space domain made of a single element of length
L and an arbitrary rectangular domain in the plane xy.
4.2 Finite Element Displacement Fields
Assumed as x the direction of propagating wave (Figure 1) with frequency !,
wavenumber k and heading angle �, the displacements field can be approximated
as
d(x, y, z, t) =
2
66664
u(z)
v(z)
w(z)
3
77775ej[!t�k(cos(�)x+sin(�)y)] (23)
The equation (23) resemble the equation (11), with the only exception that
in equation (11), the displacements refer to a plane stress problem, while in
equation (23) a full 3D stress-strain problem is considered. The displacements
at x = 0 for the single element of length L can be approximated by the following
10
Figure 1: 1D mesh
one-dimensional interpolating function
2
66664
u(z)
v(z)
w(z)
3
77775=
2
66664
Ni(z) 0 0
0 Ni(z) 0
0 0 Ni(z)
3
77775
2
66664
qu
qv
qw
3
77775= N(z) · q0 (24)
with N(z) the matrix of shape functions (size 3⇥6) and q0 the vector of complex
amplitudes of nodal displacements (Cook et al., 1989)
Ni(z) =
1� zL
zL
�(25)
11
2
66664
qu
qv
qw
3
77775=
2
666666666666664
u1
u2
v1
v2
w1
w2
3
777777777777775
(26)
4.3 Definition of Sti↵ness and Mass Matrices
The strain in the element is
e(x, y, z, t) =
2
666666666666664
✏xx
✏yy
✏zz
�yz
�xz
�xy
3
777777777777775
=
2
666666666666666666664
@
@x0 0
0@
@y0
0 0@
@z@
@y
@
@x0
@
@z0
@
@x
0@
@z
@
@y
3
777777777777777777775
d (27)
By using the equation (23)
e(x, y, z, t) = F(k, �, z) · q0ej[!t�k(cos(�)x+sin(�)y)] (28)
12
where the strain-displacement matrix F(k, �, z) (size 6⇥ 6) is given by
F(k, �, z) =
2
66666666666666666664
�jk cos(�)Ni(z) 0 0
0 �jk sin(�)Ni(z) 0
0 0@Ni
@z
0@Ni
@z�jk sin(�)Ni(z)
@Ni
@z0 �jk cos(�)Ni(z)
�jk sin(�)Ni(z) �jk cos(�)Ni(z) 0
3
77777777777777777775
(29)
Now, it is necessary to introduce a stress-strain relationship for a 3D orthotropic
material in the lamina reference OxLyL. For this kind of material, 9 independent
engineering constants are needed (Jones, 1999)
sL = CL · eL CL = S�1
L (30)
SL =
2
6666666666666666664
1
E11
�⌫21E22
�⌫31E33
0 0 0�⌫12E11
1
E22
�⌫32E33
0 0 0
�⌫13E11
�⌫23E22
1
E330 0 0
0 0 0 1
G230 0
0 0 0 0 1
G310
0 0 0 0 0 1
G12
3
7777777777777777775
(31)
the matrix is simmetric, from Betti’s theorem, (Jones, 1999)
⌫ij
Eii=
⌫ji
Ejji, j = 1, 2, 3 (32)
Then the following tensorial reference transformation between lamina reference
13
Figure 2: Reference Transformation between Lamina Reference OxLyL andLaminate Reference Oxy
and laminate reference Oxy is introduced (Figure 2)
Cx�y = T(✓)�1CLRT(✓)R�1 (33)
where ✓ is the angle between xL � yL axis and x � y axis (the z � axis is the
same for both references).
T(✓) =
2
6666666666666666664
cos2(✓) sin2(✓) 0 0 0 2 sin(✓) cos(✓)
sin2(✓) cos2(✓) 0 0 0 �2 sin(✓) cos(✓)
0 0 1 0 0 0
0 0 0 cos(✓) � sin(✓) 0
0 0 0 sin(✓) cos(✓) 0
� sin(✓) cos(✓) sin(✓) cos(✓) 0 0 0 cos2(✓)� sin2(✓)
3
7777777777777777775
(34)
14
and
R =
2
666666666666664
1 0 0 0 0 0
0 1 0 0 0 0
0 0 1 0 0 0
0 0 0 2 0 0
0 0 0 0 2 0
0 0 0 0 0 2
3
777777777777775
(35)
Then, the time averaged kinetic and the strain energies can be evaluated as
T = �12!2qH
0
Z
⌦
N(z)T ⇢N(z)d⌦�q
0
(36)
U =12qH
0
Z
⌦
F(k, �, z)HCx�yF(k, �, z)d⌦�q
0
(37)
Substituting equation (36) and equation (37) in equation (20), it can be obtained
�
�!2
2qT
0
Mq0
+12qT
0
K(k,�)q0
�= 0 (38)
where the mass and sti↵ness matrices are defined as
M =Z L
0
N(z)T ⇢N(z)dz (39)
K(k,�) =Z L
0
FH(k, �, z)Cx�yF(k, �, z)dz (40)
where L is the length of the element. Furthermore, the equation (40) is consis-
tent, i.e. they return for ✓ = 0 ,E11
= E22
= E33
= E, ⌫12
= ⌫31
= ⌫23
= ⌫ and
G12
= G31
= G23
= E2(1+⌫)
the case for an uniform and isotropic plate. Since the
strain-displacement matrix only contains terms linear in k, the sti↵ness matrix
15
can be rewritten in the form
K(k, �) = K2(�)k2 + K1(�)k + K0(�) (41)
A single element has 6 degrees of freedom. The number of the eigenvalues that
could be extracted from such an element is then 6, which is the exact number of
the propagating waves (3 for both directions of travel). Moreover, even only one
element can give good results for the dispersive relations in a homogeneous plate,
as it will showed later. Then a rule of thumb for discretizing the thickness could
be one or two elements per layer of the laminate. Being the proposed mesh a 1D
discretization, all these matrices can be easily assembled in a straightforward
way. Indeed, given the elastic properties of each layer, the matrices K0, K1,
K2 and M are readily calculated. Afterwards, these matrices are expanded to
the size of the total number of nodes, allocated in the right position and then
all summed in order to give the assembled matrices of the whole thickness.
5 Characteristic Equation and Output Features
Using the above variational formulation, from equation (38)
�qT0
⇥�!2Mq
0
+ K(k, �)q0
⇤= 0 8�q
0
(42)
thus, the characteristic equation takes the following form
[K2(�)k2 + K1(�)k + K0(�)� !2M]q0 = 0 (43)
If � and ! are fixed, the characteristic equation is a generalized quadratic eigen-
value problem for k and the dispersion curves result in varying the frequency,
while at fixed ! the polar pattern is derived when the heading angle range be-
16
tween 0� and 360�. This kind of problem can be easily transformed in a linear
one by the positions
q1 = kq0 (44)
C2 = K2 C1 = K1 C0 = K0 � !2M (45)
so that
2
640 I
�C2�1C0 �C2
�1C1
3
75
2
64q0
q1
3
75� k
2
64I 0
0 I
3
75
2
64q0
q1
3
75 = 0 (46)
These eigenvalues can be divided in three groups:
(i) purely real
(ii) purely imaginary
(iii) complex
The (i) are referred as propagating oscillating waves, because from equation
(23), they generates terms with no exponential decay. The waves that exhibit an
exponential decay are named evanescent waves and they are of two types, non-
oscillating (eigenvalues purely imaginary) and oscillating (complex eigenvalues).
Evanescent waves are of no interest because they do not propagate along the
material, but simply extinguish with time. The sign of real and imaginary
part of the eigenvalues indicate the direction of travel of a given wave. The
eigenvectors represent the cross-sectional wave shape associated with a given
wave, at a fixed frequency. It should be noted that the eigenvectors refer to a
1D domain along the z � axis.
17
6 Results
6.1 Dispersion Curves and Eigenvector Plots
6.1.1 Homogeneous Plate
In this section the consistency with the isotropic case is shown together with the
comparison with the analytical formulas (1) for an aluminium plate of thickness
0.0012m, density 2700kgm�3, E = 71e9Pa and ⌫ = 0.3296. As it can be seen
100 200 300 400 500 600 700 800 900 100010−1
100
101
102
Frequency [Hz]
Wav
enum
ber
[m]
(a)
(c)
(b)
Figure 3: Homogeneous Plate: continuous line, analytical result; dotted line, SFEMresults; (a) bending wave, (b) shear wave, (c) longitudinal wave
from Figures (3) and (4), there is a perfect agreement with the analytical results
for both spectra and polar patterns, even if only two linear elements are used;
the FE results converge using simply one element, too. It must be pointed out
that the patterns are circular, due to the isotropic nature of the material, so the
dispersion curves in Figure (3) are the same for every heading angle. This is
18
not the case for the composite plate, where a heading angle must be specified.
(a) Bending Wave Pattern at 1.5kHz (b) Shear Wave at Pattern 1.5kHz
(c) Longitudinal Wave Pattern at 1.5kHz
Figure 4: Polar Patterns for the Homogeneous Plate: Continuos Line: Analyti-cal; Diamond Line: SFEM
6.1.2 Composite Plate
The engineering properties on the plate are resumed in table 1. The transverse
properties were set in order to satisfy the assumptions of plane stress on which
the formulas used in section 3 are based. One element per layer was used in
the analysis. These results agreed with the analytical ones, again with spectra
as in Figures (5) and patterns as in Figures (6). As it can seen from these
figures, the wavenumbers are strongly dependent from the heading angle, due
19
Material A Material BE
11
65e9 Pa 145e9 PaE
22
65e9 Pa 7.79e9 PaG
12
3.86e9 Pa 4e9 Pa⌫12
0.05 0.34⇢ 1467 kgm�3 1550 kgm�3
Thickness 2.37 mm 2.37 mmLay-up Sequence [0A, 45B, 90B, 45B, 0B, 90B]S
Table 1: Engineering Properties of the Composite Plate
to the anisotropic nature of the laminate. An immediate visualization of the
wave as in Figures 7(a), (b) and (c) can be provided once the eigenvector q0
is obtained. Then, the displacement field can be get from equation (23) and
then plotted over a 3D domain in the x,y and z axis. Since the domain is
finite only in the z direction, the x and y limits of the domain can be chosen
arbitrarily. The wave depicted in Figure 7(a) is a bending wave, whereas the
one in Figure 7(b) is a shear wave and in Figure 7(c) a longitudinal wave is
showed. Using equation (2) the group velocity can be evaluated from dispersion
curves. Furthermore when area A of the rectangular flat plate is specified,
from equation (3) the modal densities curves for the propagating waves can
be computed. According to a SEA formulation, these modal densities need to
be averaged over the heading angle (Ghinet et al., 2005). Moreover, following
(Shorter, 2004) it is also possible to evaluate the structural damping loss factor
(DLF) when a DLF for each lamina is specified. However these details are not
given here.
20
(a) Dispersion Curves at � = 0�
(b) Dispersion Curves at � = 45�
(c) Dispersion Curves at � = 90�
Figure 5: Dispersion Curves for the Composite Plate: Continuos Line: Analyt-ical; Symbols Line: SFEM. (f) flexural, (s) shear, (l) longitudinal
21
(a) Bending Wave Pattern at 1.5 kHz (b) Shear Wave at Pattern 1.5 kHz
(c) Longitudinal Wave Pattern at 1.5 kHz
Figure 6: Polar Patterns for the Composite Plate: Continuos Line: Analytical;Diamond Line: SFEM
22
(a) Bending Wave at 4 kHz
(b) Shear Wave at 4 kHz
(c) Longitudinal Wave at 4 kHz
Figure 7: Eigenvector Plots for the Composite Plate at � = 0�. Axis scales areequal, the thickness is much smaller than the wavelength
23
7 Limits of Classical Laminate Plate Theory
In this section the limits of the CLPT are illustrated. At this purpose, a char-
acteristic adimensional number could be introduced
µ =h
�(47)
where h is the thickness of the plate and � is the smallest wavelength (usually
the flexural one). When µ << 1 the plate could be considered thin, since the
h is much smaller than the characteristic length of the problem, which is the
wavelength of the propagating wave. Since the � decreases with the increasing
of the frequency, at relatively high frequencies the analytical approach explained
in section 3 is inadequate to predict the dispersion properties of the laminate
plate, because the smallest wavelength is the same order of magnitude of the
thickness. The plate indeed becomes thick. The frequency limit when such
event occurs !lim is when µ ⇡ 1
k(!lim) =2⇡
h(48)
New waveforms appear when ! >> !lim as it can seen from the dispersion plot
in Figure 8 and from Figures 9. The bending wave in Figure 9(a) is slightly
di↵erent from the one in Figure 7(a) and its dispersion curve di↵ers from the
analytical theory. The wave 9(b) cannot be predicted from the CLPT since
according to the eigenproblem (12), only 6 eigenvalues (3 for both directions
of travel) are obtainable, whereas 8 eigenvalues come from the SFEM above
17 kHz. Thus, when the frequency increases, a SFEM approach is useful to
overcome the limits of the CLPT.
24
Figure 8: Dispersion Curves for the Composite Plate: Continuos Line: SFEM;Dash-dotted Line: Analytical. (s) shear, (l) longitudinal, (a) and (b) new wave-forms
25
(a)
(b)
Figure 9: Eigenvector Plots for the Composite Plate at � = 0�: New Waveformsat 27 kHz. Axis scales are equal, the thickness is comparable with the wavelength
26
8 Conclusions
An extension to anisotropic laminates of an existing FEA based waveguide pro-
cedure was illustrated. The laminate is made up of orthotropic layers arbitrarily
oriented. Using Hamilton’s variational principle, mass and sti↵ness matrices
were developed. The followed approach is based on a one dimensional finite
element discretization throughout the thickness,then a full 3D stress-strain re-
lationship is required. An orthotropic constitutive relation is used so 9 inde-
pendent variables are needed. A reference transformation between lamina and
laminate was also necessary in order to introduce the lamina orientation. The
resulting equation is expressed in terms of a quadratic eigenproblem in the
wavenumber variable at a fixed frequency and heading angle. This problem
was transformed into a linear one and easily solved with standard numerical
routines. Dispersion curves and polar patterns are obtained for the case of an
uniform isotropic and for a laminate composite plates. Comparison with ana-
lytical formulas available from the classical plate laminate theory showed good
agreement with the FE results. Nevertheless, the analytical theory fails with
the increasing of the frequency. In fact, CLPT can’t predict the appearance of
new waveforms, whereas SFEM can identify new structural waveguides. Thus
SFEM can overcome the limits of the CLPT, allowing a more satisfactory anal-
ysis of the dispersion properties at higher frequencies. The procedure can be
easily completed by including the evaluation of the resulting loss factor, given
the individual loss factor of each lamina and the group velocity curves of the
propagating waves, as well as their modal densities. All the present evaluations
and results have been obtained by using Matlab: the m-files can be requested
to the first author.
27
References
A. Baz. Spectral finite-element modeling of the longitudinal wave propagation
in rods treated with active constrained layer damping. Smart Mater. Struct,
9:372–377, 2000.
F. Birgersson, S. Finnveden, and G. Robert. Modelling turbulence-induced
vibration of pipes with a spectral finite element method. Journal of Sound
and Vibration, 278(4-5):749–772, 2004.
A. Chakraborty and S. Gopalakrishnan. A Spectral Finite Element Model for
Wave Propagation Analysis in Laminated Composite Plate. Journal of Vi-
bration and Acoustics, 128:477, 2006.
M. Chitnis, Y. Desai, and T. Kant. Wave propagation in laminated composite
plates using higher order theory. Journal of applied mechanics, 68(3):503–505,
2001.
R. Cook, D. Malkus, M. Plesha, and R. Witt. Concepts and Applications of
Finite Element Analysis. John Wiley & Sons, 1989.
L. Cremer, B. Petersson, and M. Heckl. Structure-Borne Sound: structural
vibrations and sound radiation at audio frequencies. Springer, 2005.
S. Datta, A. Shah, R. Bratton, and T. Chakraborty. Wave propagation in
laminated composite plates. The Journal of the Acoustical Society of America,
83:2020, 1988.
S. Finnveden. Evaluation of modal density and group velocity by a finite element
method. Journal of Sound and Vibration, 273(1):51–75, 2004.
S. Ghinet, N. Atalla, and H. Osman. The transmission loss of curved laminates
and sandwich composite panels. The Journal of the Acoustical Society of
America, 118:774, 2005.
28
K. Heron. Predictive SEA and anisotropic panels. In Proceedings of ISMA,
Leuven, 2002.
C. Johnson and D. Kienholz. Finite element prediction of damping in structures
with constrained viscoelastic layers. AIAA Journal, 20(9):1284–1290, 1982.
R. Jones. Mechanics of composite materials. Taylor & Francis, 1999.
P. Kudela, A. Zak, M. Krawczuk, and W. Ostachowicz. Modelling of wave prop-
agation in composite plates using the time domain spectral element method.
Journal of Sound and Vibration, 302(4-5):728–745, 2007.
F. Y. L. Wang. Group velocity and characteristic wave curves of Lamb waves in
composites: Modeling and experiments. Composites Science and Technology,
67:1370–1384, 2007.
A. Leissa. Vibration of Plates. Published for the Acoustical Society of America
through the American Institute of Physics, 1993.
R. Lyon. Statistical energy analysis of dynamical systems: theory and applica-
tions. MIT Press, 1975.
B. Mace, D. Duhamel, M. Brennan, and L. Hinke. Finite element prediction of
wave motion in structural waveguides. The Journal of the Acoustical Society
of America, 117:2835, 2005.
D. Mahapatra, A. Singhal, and S. Gopalakrishnan. A higher-order finite waveg-
uide model for spectral analysis of composite structures. Computer Methods
in Applied Mechanics and Engineering, 195(9&12):1116–1135, 2006.
A. Nayfeh. The general problem of elastic wave propagation in multilayered
anisotropic media. The Journal of the Acoustical Society of America, 89:
1521, 1991.
29
D. Roy Mahapatra and S. Gopalakrishnan. A spectral finite element model
for analysis of axial–flexural–shear coupled wave propagation in laminated
composite beams. Composite Structures, 59(1):67–88, 2003.
P. Shorter. Wave propagation and damping in linear viscoelastic laminates. The
Journal of the Acoustical Society of America, 115:1917, 2004.
S. Timoshenko and J. Goodier. Theory of Elasticity [M]. New York: Mac Graw
Hill Book Company, pages 328–333, 1970.
A. Zak, M. Krawczuk, and W. Ostachowicz. Propagation of in-plane elastic
waves in a composite panel. Finite Elements in Analysis and Design, 43(2):
145–154, 2006.
30
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
Aircraft Interior NoiseA.S. 1/6/04
Sommario• Indicatori del rumore interno• Generazione del rumore• Sorgenti di rumore:
– Il propulsore, lo strato limite turbolento, le sorgenti interne.
• Sistemi per il controllo del rumore:– sistemi passivi e sistemi attivi
• Metodi previsionali per il calcolo del rumore interno
• La messa a punto sperimentale• La campagna riduzione rumore dell’ATR
Aircraft Interior NoiseA.S. 1/6/04
Aircraft Interior NoiseA.S. 1/6/04
Noise Index
• Esistono numerosi indici di misura del rumore, e tra essi i più utilizzati per fornire un immagine del comfort acustico di un velivolosono:–– OASPLOASPL–– dBAdBA–– SIL3, SIL4, PSILSIL3, SIL4, PSIL
Aircraft Interior NoiseA.S. 1/6/04
• L’OASPL e l’overall sound pressure level calcolato sullo spettro (0-10KHz) ed è normalmente utilizzato per quelle applicazioni in cui dominano le alte frequenze (velivoli a getto).
Noise Index
Aircraft Interior NoiseA.S. 1/6/04
• Il dBA e l’overall calcolato sullo spettro (0-12.5 KHz) cui è applicato il filtro A (effetto orecchio umano) ed è normalmente utilizzato per quelle applicazioni in cui dominano le basse frequenze (velivoli a elica).
Noise Index
Aircraft Interior NoiseA.S. 1/6/04
Spettro Lineare vs Spettro Filtrato A
0
10
20
30
40
50
60
70
80
90
100
10 100 1000 10000
Frequency [Hz]
SPL
[dB
]
Pesato A Lineare
Aircraft Interior NoiseA.S. 1/6/04
• Il SIL (Speech Interference Level) è una misura del disturbo acustico nelle frequenze del parlato:–SIL3 media aritmetica del SPL nelle
bande di Ottave 500,1K, 2K Hz–SIL4 media aritmetica del SPL nelle
bande di Ottave 500, 1K, 2K, 4K Hz• E’ generalmente utilizzato per
caratterizzare velivoli ad elevato comfort interno (Business Jet).
Noise Index
Aircraft Interior NoiseA.S. 1/6/04
Le sorgenti di rumore esterno: il propulsore
• La maggiore sorgente esterna di rumore è il motopropulsore che sui moderni aeroplani da trasporto può essere di due tipi:––turbofanturbofan––turbopropturboprop
Aircraft Interior NoiseA.S. 1/6/04
Il motore turbofan
Aircraft Interior NoiseA.S. 1/6/04
Il motore turboprop
Aircraft Interior NoiseA.S. 1/6/04
Il rumore generato da un turbofan
• Il rumore generato dai moderni motori turbofan non risulta essere particolarmente critico per il rumore interno ad eccezione delle fasi di decollo e salita in cui si trova alla massima potenza.
Aircraft Interior NoiseA.S. 1/6/04
Il rumore generato da un turbofan
• In queste fasi le elevate velocità del fan e la ridotta lunghezza dell’inlet generano un sistema di onde d’urto all’interno dello stesso che sono la causa del cosiddetto “Buzzsaw Noise”.
• In alcune fasi della crociera può essere predominante il rumore del getto che viene trattato con interventi specifici locali.
Aircraft Interior NoiseA.S. 1/6/04
Il rumore generato da un turbofan
Aircraft Interior NoiseA.S. 1/6/04
Gli interventi per la riduzione del rumore generato da un turbofan
Aircraft Interior NoiseA.S. 1/6/04
Il rumore generato da un turboprop
• Lo spettro di rumore tipico generato da un turboprop è caratterizzato da toni a bassa frequenza in cui è concentrata la maggior parte dell’energia.
PalexNumRPMBPF .60
=
Aircraft Interior NoiseA.S. 1/6/04
Il rumore generato da un turboprop
Aircraft Interior NoiseA.S. 1/6/04
Il rumore generato da un turboprop
Typical propeller aircraft internal noise spectrum
90 140
190
240
290
Frequency [Hz]
SPL
[dB]
10 dBpropeller tone noise
broadband noise
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore: De-Tuning della fusoliera
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore: Assorbitori Dinamici di Vibrazione
• Gli assorbitori dinamici di vibrazione sono sono sistemi massa/molla a 1 DOF in grado di assorbire le vibrazioni delle ordinate “intonati” alle frequenze del propeller.
MKfn
p21
=
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore: Assorbitori Dinamici di Vibrazione
Aircraft Interior NoiseA.S. 1/6/04
without Tuned absorbers with tuned absorbers
Sistemi per il controllo del rumore: Assorbitori Dinamici di Vibrazione
Aircraft Interior NoiseA.S. 1/6/04
Noise Level Distribution @ seated passenger head levelBaseline with Tuned Vibration Absorbers
-2000.00 -1000.00 0.00 1000.00 2000.00
8500.00
9000.00
9500.00
10000.00
10500.00
11000.00
11500.00
12000.00
-2000.00 -1000.00 0.00 1000.00 2000.00
8500.00
9000.00
9500.00
10000.00
10500.00
11000.00
11500.00
12000.00
60.0062.0064.0066.0068.0070.0072.0074.0076.0078.0080.0082.0084.0086.0088.0090.0092.0094.0096.00
Sistemi per il controllo del rumore: Assorbitori Dinamici di Vibrazione
Aircraft Interior NoiseA.S. 1/6/04
Sistemi attivi per il controllo del rumore: ANC
• I sistemi di controllo attivo del rumore si basano sul principio di emettere un rumore in “antifase” (secondary field) rispetto al rumore da controllare (primary field) in modo che il campo risultante (residual noise) sia minimo.
Aircraft Interior NoiseA.S. 1/6/04
Sistemi attivi per il controllo del rumore: ANC
Aircraft Interior NoiseA.S. 1/6/04
Sistemi attivi per il controllo del rumore: ANC
Aircraft Interior NoiseA.S. 1/6/04
Sistemi attivi per il controllo del rumore: ANC
Aircraft Interior NoiseA.S. 1/6/04
• Una evoluzione dei sistemi di controllo del rumore è rappresentato dall’ Active Noise and Vibration Control, sistema che si basa sulla riduzione attiva delle vibrazioni che inducono rumore.
Sistemi attivi per il controllo del rumore: ANVC
Aircraft Interior NoiseA.S. 1/6/04
Sistemi attivi per il controllo del rumore: ANVC
Aircraft Interior NoiseA.S. 1/6/04
• La seconda principale sorgente di energia acustica è lo strato limite turbolento.
• La turbolenza generata all’interno dello s.l. genera delle onde di pressione che eccitano e mettono in vibrazione i pannelli della fusoliera.
Le sorgenti di rumore esterno: lo strato limite turbolento
Aircraft Interior NoiseA.S. 1/6/04
• Il contributo dello strato limite turbolento alla generazione del rumore risulta essere predominante nel range di frequenze medio-alte (1000-5000 Hz).
Le sorgenti di rumore esterno: lo strato limite turbolento
Aircraft Interior NoiseA.S. 1/6/04
• Esistono diverse possibilità per il controllo del rumore generato dallo strato limite turbolento:–Ottimizzazione strutturale (spessore
pannelli skin, spaziatura dei correnti)–Ottimizzazione del lay-up–Sistemi di sospensione attiva per il
furnishing–Sistemi attivi distribuiti sullo skin
Sistemi per il controllo del rumore dello strato limite turbolento
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore dello strato limite turbolentoThermoacoustic blanket
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore dello strato limite turbolentoThermoacoustic blanket
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore dello strato limite turbolento
Damping strutturale
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore dello strato limite turbolento
Damping strutturale
Aircraft Interior NoiseA.S. 1/6/04
Le sorgenti di rumore interno
• Oltre alle sorgenti esterne, esistono sul velivolo tutta una serie di sorgenti di vibrazioni/rumore interne che contribuiscono in maniera significativa a modificare il livello di rumore interno.
Aircraft Interior NoiseA.S. 1/6/04
Le sorgenti di rumore interno -Impianto distribuzione aria in cabina
Aircraft Interior NoiseA.S. 1/6/04
45
50
55
60
65
70
75
80
85
90
95
20 25 32 40 50 63 80 100
125
160
200
250
315
400
500
630
800
1000
1250
1600
2000
2500
3150
4000
5000
6300
8000
10000
12500
SPLi
[dB
]
Le sorgenti di rumore interno -Effetto dell’airconditioning noise
Airconditioning ON
Airconditioning OFF
Aircraft Interior NoiseA.S. 1/6/04
Metodi di calcolo per il rumore interno
• Esistono diverse tipologie di metodi previsionali per la stima del rumore interno:–Metodi Deterministici (FEM, BEM)–Metodi Statistici (SEA)–Metodi Bilancio Energetico
Aircraft Interior NoiseA.S. 1/6/04
Metodi Deterministici
• I metodi deterministici FEM/BEM sono indicati per lo studio della trasmissione del rumore a basse frequenze.
• Tale approccio è tanto più accurato quanto più è fitta la mesh del modello numerico.
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta strutturale
frequenze naturali dell'ordinata di fusoliera dell' ATR-42
0
50
100
150
200
250
A2 S2 A3 S3 A4 S4 A5 S5 A6 S6modo
Hz
MSC/NASTRAN - pressurization effectMSC/NASTRAN - no pressurization effectexperimental
X Y
Z
r
tz
1.01
0.972
0.933
0.895
0.857
0.818
0.78
0.742
0.703
0.665
0.626
0.588
0.55
0.511
0.473
0.434
0.396
V1C1
Output Set: Mode 4 16.34406 HzDeformed(1.01): Total TranslationContour: Total Translation
Calcolo dei modi propri strutturali
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta strutturale
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta strutturale
R2 = 0.9844
0.00
50.00
100.00
150.00
200.00
250.00
300.00
350.00
400.00
450.00
0.00 50.00 100.00 150.00 200.00 250.00 300.00 350.00 400.00 450.00
FEA
EMA
Correlazione Ideale Lineare (Ideale) Lineare (Correlazione)
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta accoppiata struttura-acustica
[ ] [ ][ ]
[ ] [ ][ ] [ ] ;
000
=
Α+
Α−
Fpu
KK
pu
MM
A
s
AT
f
s
&&
&&
r
Confronto SPL medio in camera ricevente
-10
0
10
20
30
40
50
60
70
80
90
100
110
120
130
0 100 200 300 400 500 600 700 800 900 1000
Frequenza [Hz]
SPL
[dB
]
Valore sperimentaleVal. numerico 1 WattVal. Numerico 10 Watt
X
Y
Z
4 . 9 4 1
4 . 6 3 3
4 . 3 2 4
4 . 0 1 5
3 . 7 0 6
3 . 3 9 7
3 . 0 8 8
2 . 7 8
2 . 4 7 1
2 . 1 6 2
1 . 8 5 3
1 . 5 4 4
1 . 2 3 5
0 . 9 2 6 5
0 . 6 1 7 7
0 . 3 0 8 8
0 .
V1
C1
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta accoppiata struttura-acustica
X Y
Z
V1C10
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta accoppiata struttura-acustica
Eccitazione acustica sulla fusoliera
Risposta acustica della cabina alla BPF
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta accoppiata struttura-acustica
Aircraft Interior NoiseA.S. 1/6/04
Metodi energetici
• I metodi energetici si basano sul bilancio di energia interna ed esterna e dell’energia che si scambiano i diversi volumi che rappresentano la nostra cavità.
Aircraft Interior NoiseA.S. 1/6/04
VOLAdEEEEEE PROENBLoutass +++=+Eass= Acoustic Power dissipated inside each elemental volume
Eout= Outcoming Acoustic power from each elemental volume
EBL= Incoming Acoustic Power inside each elemental volume due to turbulent boundary layer
EEN= Incoming Acoustic Power inside each elemental volume due to propulsion noise
EPRO= Acoustic Power generated inside each elemental volume (internal sources i.e. air conditioning
EVOLAd= Incoming Acoustic power inside the elemental volume from each elemental volume
Metodi energetici
Aircraft Interior NoiseA.S. 1/6/04
SISIW
Sc
pW
Sc
pW
Sc
pW
Sc
pE
pi
iPp
TL
extio
avgENENi
TL
extio
avgBLBLi
TLwalli
io
avgtrai
o
avgtass
ENi
BLi
==
=
=
=
=⋅Π=
∑
−
−
−
102
102
102
2
1041
1041
1041
41
r
r
r
ar
a Dissipated Acoustic Power
Incoming and Outcoming Acoustic power from/to each elemental volume
Incoming Acoustic Power inside each elementalvolume due to turbulent boundary layer
Incoming Acoustic Power inside each elementalvolume due to propulsion noise
Acoustic Power generated inside each elementalvolume (internal sources i.e. air conditioning)
Metodi energetici
Aircraft Interior NoiseA.S. 1/6/04
Metodi energetici
+−
⋅+⋅+
+=
−
∑
∑∑−
+−−
10
10int
10
log10
1010int
10log10
101041010log10
iwall
walliADi
i
BLiref
refp
ENiENiBLiBLi
TL
ii
i
i
TLSPLTL
IW
PWLTLSPLTLSPL
iexti
S
SSSPL
a
Aircraft Interior NoiseA.S. 1/6/04
CO-PILOTPILOT
Metodi energetici - Modello Cockpit di un velivolo da trasporto
Aircraft Interior NoiseA.S. 1/6/04
RISULTATI CABIN NOISE COCKPIT
100
102
104
106
108
110
112
114
116
118
120
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65
VOLUMI
oasp
l
PILOTCO-PILOT
Metodi energetici - Distribuzione del rumore all’interno del Cockpit di un velivolo da trasporto
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale
• Una volta definiti e progettati i diversi interventi per la riduzione del rumore, vengono effettuate diverse tipologie di prove per la verifica e messa a punto.
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale
• Esistono tre diverse tipologie di prove:–prove di laboratorio su componenti
(transmission loss, absorption,insertion loss).
– prove su mock-up sperimentali full scale.
– prove in volo.
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale: prove di transmission loss
Aircraft Interior NoiseA.S. 1/6/04
Sommario• Indicatori del rumore interno• Generazione del rumore• Sorgenti di rumore:
– Il propulsore, lo strato limite turbolento, le sorgenti interne.
• Sistemi per il controllo del rumore:– sistemi passivi e sistemi attivi
• Metodi previsionali per il calcolo del rumore interno
• La messa a punto sperimentale• La campagna riduzione rumore dell’ATR
Aircraft Interior NoiseA.S. 1/6/04
Aircraft Interior NoiseA.S. 1/6/04
Noise Index
• Esistono numerosi indici di misura del rumore, e tra essi i più utilizzati per fornire un immagine del comfort acustico di un velivolosono:–– OASPLOASPL–– dBAdBA–– SIL3, SIL4, PSILSIL3, SIL4, PSIL
Aircraft Interior NoiseA.S. 1/6/04
• L’OASPL e l’overall sound pressure level calcolato sullo spettro (0-10KHz) ed è normalmente utilizzato per quelle applicazioni in cui dominano le alte frequenze (velivoli a getto).
Noise Index
Aircraft Interior NoiseA.S. 1/6/04
• Il dBA e l’overall calcolato sullo spettro (0-12.5 KHz) cui è applicato il filtro A (effetto orecchio umano) ed è normalmente utilizzato per quelle applicazioni in cui dominano le basse frequenze (velivoli a elica).
Noise Index
Aircraft Interior NoiseA.S. 1/6/04
Spettro Lineare vs Spettro Filtrato A
0
10
20
30
40
50
60
70
80
90
100
10 100 1000 10000
Frequency [Hz]
SPL
[dB
]
Pesato A Lineare
Aircraft Interior NoiseA.S. 1/6/04
• Il SIL (Speech Interference Level) è una misura del disturbo acustico nelle frequenze del parlato:–SIL3 media aritmetica del SPL nelle
bande di Ottave 500,1K, 2K Hz–SIL4 media aritmetica del SPL nelle
bande di Ottave 500, 1K, 2K, 4K Hz• E’ generalmente utilizzato per
caratterizzare velivoli ad elevato comfort interno (Business Jet).
Noise Index
Aircraft Interior NoiseA.S. 1/6/04
Le sorgenti di rumore esterno: il propulsore
• La maggiore sorgente esterna di rumore è il motopropulsore che sui moderni aeroplani da trasporto può essere di due tipi:––turbofanturbofan––turbopropturboprop
Aircraft Interior NoiseA.S. 1/6/04
Il motore turbofan
Aircraft Interior NoiseA.S. 1/6/04
Il motore turboprop
Aircraft Interior NoiseA.S. 1/6/04
Il rumore generato da un turbofan
• Il rumore generato dai moderni motori turbofan non risulta essere particolarmente critico per il rumore interno ad eccezione delle fasi di decollo e salita in cui si trova alla massima potenza.
Aircraft Interior NoiseA.S. 1/6/04
Il rumore generato da un turbofan
• In queste fasi le elevate velocità del fan e la ridotta lunghezza dell’inlet generano un sistema di onde d’urto all’interno dello stesso che sono la causa del cosiddetto “Buzzsaw Noise”.
• In alcune fasi della crociera può essere predominante il rumore del getto che viene trattato con interventi specifici locali.
Aircraft Interior NoiseA.S. 1/6/04
Il rumore generato da un turbofan
Aircraft Interior NoiseA.S. 1/6/04
Gli interventi per la riduzione del rumore generato da un turbofan
Aircraft Interior NoiseA.S. 1/6/04
Il rumore generato da un turboprop
• Lo spettro di rumore tipico generato da un turboprop è caratterizzato da toni a bassa frequenza in cui è concentrata la maggior parte dell’energia.
PalexNumRPMBPF .60
=
Aircraft Interior NoiseA.S. 1/6/04
Il rumore generato da un turboprop
Aircraft Interior NoiseA.S. 1/6/04
Il rumore generato da un turboprop
Typical propeller aircraft internal noise spectrum
90 140
190
240
290
Frequency [Hz]
SPL
[dB]
10 dBpropeller tone noise
broadband noise
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore: De-Tuning della fusoliera
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore: Assorbitori Dinamici di Vibrazione
• Gli assorbitori dinamici di vibrazione sono sono sistemi massa/molla a 1 DOF in grado di assorbire le vibrazioni delle ordinate “intonati” alle frequenze del propeller.
MKfn
p21
=
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore: Assorbitori Dinamici di Vibrazione
Aircraft Interior NoiseA.S. 1/6/04
without Tuned absorbers with tuned absorbers
Sistemi per il controllo del rumore: Assorbitori Dinamici di Vibrazione
Aircraft Interior NoiseA.S. 1/6/04
Noise Level Distribution @ seated passenger head levelBaseline with Tuned Vibration Absorbers
-2000.00 -1000.00 0.00 1000.00 2000.00
8500.00
9000.00
9500.00
10000.00
10500.00
11000.00
11500.00
12000.00
-2000.00 -1000.00 0.00 1000.00 2000.00
8500.00
9000.00
9500.00
10000.00
10500.00
11000.00
11500.00
12000.00
60.0062.0064.0066.0068.0070.0072.0074.0076.0078.0080.0082.0084.0086.0088.0090.0092.0094.0096.00
Sistemi per il controllo del rumore: Assorbitori Dinamici di Vibrazione
Aircraft Interior NoiseA.S. 1/6/04
Sistemi attivi per il controllo del rumore: ANC
• I sistemi di controllo attivo del rumore si basano sul principio di emettere un rumore in “antifase” (secondary field) rispetto al rumore da controllare (primary field) in modo che il campo risultante (residual noise) sia minimo.
Aircraft Interior NoiseA.S. 1/6/04
Sistemi attivi per il controllo del rumore: ANC
Aircraft Interior NoiseA.S. 1/6/04
Sistemi attivi per il controllo del rumore: ANC
Aircraft Interior NoiseA.S. 1/6/04
Sistemi attivi per il controllo del rumore: ANC
Aircraft Interior NoiseA.S. 1/6/04
• Una evoluzione dei sistemi di controllo del rumore è rappresentato dall’ Active Noise and Vibration Control, sistema che si basa sulla riduzione attiva delle vibrazioni che inducono rumore.
Sistemi attivi per il controllo del rumore: ANVC
Aircraft Interior NoiseA.S. 1/6/04
Sistemi attivi per il controllo del rumore: ANVC
Aircraft Interior NoiseA.S. 1/6/04
• La seconda principale sorgente di energia acustica è lo strato limite turbolento.
• La turbolenza generata all’interno dello s.l. genera delle onde di pressione che eccitano e mettono in vibrazione i pannelli della fusoliera.
Le sorgenti di rumore esterno: lo strato limite turbolento
Aircraft Interior NoiseA.S. 1/6/04
• Il contributo dello strato limite turbolento alla generazione del rumore risulta essere predominante nel range di frequenze medio-alte (1000-5000 Hz).
Le sorgenti di rumore esterno: lo strato limite turbolento
Aircraft Interior NoiseA.S. 1/6/04
• Esistono diverse possibilità per il controllo del rumore generato dallo strato limite turbolento:–Ottimizzazione strutturale (spessore
pannelli skin, spaziatura dei correnti)–Ottimizzazione del lay-up–Sistemi di sospensione attiva per il
furnishing–Sistemi attivi distribuiti sullo skin
Sistemi per il controllo del rumore dello strato limite turbolento
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore dello strato limite turbolentoThermoacoustic blanket
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore dello strato limite turbolentoThermoacoustic blanket
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore dello strato limite turbolento
Damping strutturale
Aircraft Interior NoiseA.S. 1/6/04
Sistemi per il controllo del rumore dello strato limite turbolento
Damping strutturale
Aircraft Interior NoiseA.S. 1/6/04
Le sorgenti di rumore interno
• Oltre alle sorgenti esterne, esistono sul velivolo tutta una serie di sorgenti di vibrazioni/rumore interne che contribuiscono in maniera significativa a modificare il livello di rumore interno.
Aircraft Interior NoiseA.S. 1/6/04
Le sorgenti di rumore interno -Impianto distribuzione aria in cabina
Aircraft Interior NoiseA.S. 1/6/04
45
50
55
60
65
70
75
80
85
90
95
20 25 32 40 50 63 80 100
125
160
200
250
315
400
500
630
800
1000
1250
1600
2000
2500
3150
4000
5000
6300
8000
10000
12500
SPLi
[dB
]
Le sorgenti di rumore interno -Effetto dell’airconditioning noise
Airconditioning ON
Airconditioning OFF
Aircraft Interior NoiseA.S. 1/6/04
Metodi di calcolo per il rumore interno
• Esistono diverse tipologie di metodi previsionali per la stima del rumore interno:–Metodi Deterministici (FEM, BEM)–Metodi Statistici (SEA)–Metodi Bilancio Energetico
Aircraft Interior NoiseA.S. 1/6/04
Metodi Deterministici
• I metodi deterministici FEM/BEM sono indicati per lo studio della trasmissione del rumore a basse frequenze.
• Tale approccio è tanto più accurato quanto più è fitta la mesh del modello numerico.
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta strutturale
frequenze naturali dell'ordinata di fusoliera dell' ATR-42
0
50
100
150
200
250
A2 S2 A3 S3 A4 S4 A5 S5 A6 S6modo
Hz
MSC/NASTRAN - pressurization effectMSC/NASTRAN - no pressurization effectexperimental
X Y
Z
r
tz
1.01
0.972
0.933
0.895
0.857
0.818
0.78
0.742
0.703
0.665
0.626
0.588
0.55
0.511
0.473
0.434
0.396
V1C1
Output Set: Mode 4 16.34406 HzDeformed(1.01): Total TranslationContour: Total Translation
Calcolo dei modi propri strutturali
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta strutturale
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta strutturale
R2 = 0.9844
0.00
50.00
100.00
150.00
200.00
250.00
300.00
350.00
400.00
450.00
0.00 50.00 100.00 150.00 200.00 250.00 300.00 350.00 400.00 450.00
FEA
EMA
Correlazione Ideale Lineare (Ideale) Lineare (Correlazione)
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta accoppiata struttura-acustica
[ ] [ ][ ]
[ ] [ ][ ] [ ] ;
000
=
Α+
Α−
Fpu
KK
pu
MM
A
s
AT
f
s
&&
&&
r
Confronto SPL medio in camera ricevente
-10
0
10
20
30
40
50
60
70
80
90
100
110
120
130
0 100 200 300 400 500 600 700 800 900 1000
Frequenza [Hz]
SPL
[dB
]
Valore sperimentaleVal. numerico 1 WattVal. Numerico 10 Watt
X
Y
Z
4 . 9 4 1
4 . 6 3 3
4 . 3 2 4
4 . 0 1 5
3 . 7 0 6
3 . 3 9 7
3 . 0 8 8
2 . 7 8
2 . 4 7 1
2 . 1 6 2
1 . 8 5 3
1 . 5 4 4
1 . 2 3 5
0 . 9 2 6 5
0 . 6 1 7 7
0 . 3 0 8 8
0 .
V1
C1
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta accoppiata struttura-acustica
X Y
Z
V1C10
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta accoppiata struttura-acustica
Eccitazione acustica sulla fusoliera
Risposta acustica della cabina alla BPF
Aircraft Interior NoiseA.S. 1/6/04
Approccio FEM per il calcolo della risposta accoppiata struttura-acustica
Aircraft Interior NoiseA.S. 1/6/04
Metodi energetici
• I metodi energetici si basano sul bilancio di energia interna ed esterna e dell’energia che si scambiano i diversi volumi che rappresentano la nostra cavità.
Aircraft Interior NoiseA.S. 1/6/04
VOLAdEEEEEE PROENBLoutass +++=+Eass= Acoustic Power dissipated inside each elemental volume
Eout= Outcoming Acoustic power from each elemental volume
EBL= Incoming Acoustic Power inside each elemental volume due to turbulent boundary layer
EEN= Incoming Acoustic Power inside each elemental volume due to propulsion noise
EPRO= Acoustic Power generated inside each elemental volume (internal sources i.e. air conditioning
EVOLAd= Incoming Acoustic power inside the elemental volume from each elemental volume
Metodi energetici
Aircraft Interior NoiseA.S. 1/6/04
SISIW
Sc
pW
Sc
pW
Sc
pW
Sc
pE
pi
iPp
TL
extio
avgENENi
TL
extio
avgBLBLi
TLwalli
io
avgtrai
o
avgtass
ENi
BLi
==
=
=
=
=⋅Π=
∑
−
−
−
102
102
102
2
1041
1041
1041
41
r
r
r
ar
a Dissipated Acoustic Power
Incoming and Outcoming Acoustic power from/to each elemental volume
Incoming Acoustic Power inside each elementalvolume due to turbulent boundary layer
Incoming Acoustic Power inside each elementalvolume due to propulsion noise
Acoustic Power generated inside each elementalvolume (internal sources i.e. air conditioning)
Metodi energetici
Aircraft Interior NoiseA.S. 1/6/04
Metodi energetici
+−
⋅+⋅+
+=
−
∑
∑∑−
+−−
10
10int
10
log10
1010int
10log10
101041010log10
iwall
walliADi
i
BLiref
refp
ENiENiBLiBLi
TL
ii
i
i
TLSPLTL
IW
PWLTLSPLTLSPL
iexti
S
SSSPL
a
Aircraft Interior NoiseA.S. 1/6/04
CO-PILOTPILOT
Metodi energetici - Modello Cockpit di un velivolo da trasporto
Aircraft Interior NoiseA.S. 1/6/04
RISULTATI CABIN NOISE COCKPIT
100
102
104
106
108
110
112
114
116
118
120
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65
VOLUMI
oasp
l
PILOTCO-PILOT
Metodi energetici - Distribuzione del rumore all’interno del Cockpit di un velivolo da trasporto
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale
• Una volta definiti e progettati i diversi interventi per la riduzione del rumore, vengono effettuate diverse tipologie di prove per la verifica e messa a punto.
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale
• Esistono tre diverse tipologie di prove:–prove di laboratorio su componenti
(transmission loss, absorption,insertion loss).
– prove su mock-up sperimentali full scale.
– prove in volo.
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale: prove di transmission loss
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale: prove di transmission loss
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale: prove di transmission loss
12.00
15.00
18.00
21.00
24.00
27.00
30.00
33.00
36.00
39.00
42.00
45.00
48.00
51.00
54.00
57.00
100 1000 100001/3 O.B. f req
P2 _referenceP8_stringerTT
STRINGER TYPE EFFECT
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale: prove di transmission loss
Aircraft Interior NoiseA.S. 1/6/04
Transmission LossDal valore ideale alla realtà
Aircraft Interior NoiseA.S. 1/6/04
Prove di assorbimento acustico: Tubo a impedenza
Aircraft Interior NoiseA.S. 1/6/04
Tuning dell’assorbimento acustico
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale: prove su mock-up di fusoliera
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale: prove su mock-up di fusoliera
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale: prove su mock-up di fusoliera
Aircraft Interior NoiseA.S. 1/6/04
La messa a punto sperimentale: prove di volo sul velivolo
Aircraft Interior NoiseA.S. 1/6/04
La riduzione del rumore dell’ATR
Aircraft Interior NoiseA.S. 1/6/04
• All’inizio degli anni 90 fu deciso di lanciare il programma di riduzione rumore del velivolo ATR che doveva confrontarsi con turboprop veloci della stessa categoria ma significativamente meno rumorosi (Fokker 50, Dornier 328, Saab 2000).
La riduzione del rumore dell’ATR
Aircraft Interior NoiseA.S. 1/6/04
• Il target di progetto fissato fu che in crociera a 17,000 ft @303 Kts di velocità il livello medio di rumore i cabina fosse inferiore a 78 dBA e che il livello massimo in una singola posizione non eccedesse 83 dBA (partendo da un livello max di 94 dBA e un livello medio di 86 dBA)
La riduzione del rumore dell’ATR
Aircraft Interior NoiseA.S. 1/6/04
• Il problema fu affrontato mediante definizione e applicazione di modifiche radicali:–Elica esapala con riduzione RPM– Irrigidimenti strutturali della fusoliera– Installazione TVA–Applicazione di skin damping–Definizione nuovo interior– Trattamento di tutte le sorgenti
interne
La riduzione del rumore dell’ATR
Aircraft Interior NoiseA.S. 1/6/04
• Il programma di sviluppo è durato 2 anni con circa 150 ore di prove di volo.
• Il delta peso totale installato sul velivolo è circa 150 Kg.
• Il costo totale del progetto è stato stimato pari a 1M$ per ogni dB di riduzione.
La riduzione del rumore dell’ATR
Aircraft Interior NoiseA.S. 1/6/04
ATR72 - CABIN NOISE IMPROVEMENT@ Standard Cruise conditionsAverage Noise Levels over four seats
68
70
72
74
76
78
80
82
84
86
88
90
92
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
Glo
bal d
BA le
vel
0
2
4
6
8
10
12
Window locationFlight Direction
dBA
redu
ctio
n
Interior noise level reductionATR72-500 global dBAATR72-200 global dBA
2 dBA
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
5
La potenza acustica radiata da un pannellopiano
Si vuole caratterizzare una superficie piana dal punto di vista acustico,definendo i coe�cienti caratteristici che meglio si prestano alla descrizione delcomportamento di un pannello di materiale omogeneo soggetto ad un’ondasonora incidente. Vengono fornite prima le definizioni di base delle grandezzein gioco, e successivamente si suggerisce un approccio alle coordinate discreteper la derivazione delle stesse.
5.1 Potenza sonora incidente su componenti strutturalipiani
La potenza radiata da un operatore strutturale, posto in vibrazione pere↵etto dell’incidenza di un disturbo di pressione, e punto chiave per tutta lasua caratterizzazione acustica. Si consideri un’onda di pressione normale inci-dente su una data superficie elastica. Da essa consegue una potenza incidente,data da
⇧i(!) =1
2Re
n
Z
S
pi(!, P )v⇤(!, P ) dSo
, (5.1)
dove P e il punto della superficie S del pannello (P (xP , yP , 0) ⌘ P (xP , yP ))caratterizzato da una velocita v (l’asterisco indica l’operatore complesso coni-ugato), in cui si registra un livello di pressione pi ad una certa pulsazione !.E necessario ipotizzare un modello per la distribuzione di pressione incidente,che per una generica onda piana puo essere il seguente
pi(!, x, y) = pi(!)e�j !
c0(x sin ✓ cos�+y sin ✓ sin�), (5.2)
indicando con c0
la velocita di propagazione del disturbo e con ✓ e � le incli-nazioni dell’onda incidente polare ed azimutale rispettivamente, come indicatoin Figura 5.1.
Per questo modello di pressione incidente, la potenza ad essa legata esemplicemente data da
74 5 La potenza acustica radiata da un pannello piano
Figura 5.1: inclinazione dell’onda di pressione normale incidente sul pannello.
⇧i(!) =p2i (!)S cos ✓
⇢0
c0
(5.3)
dove ⇢0
e la densita del mezzo in cui si propaga il disturbo.
5.2 Potenza sonora radiata componenti strutturali piani
La potenza radiata dallo stesso operatore strutturale, per il quale la dis-tribuzione di velocita normale v produce il disturbo di pressione pt, e datada
⇧rad(!) =1
2Re
n
Z
S
pt(!, P )v⇤(!, P ) dSo
. (5.4)
Lord Rayleigh (Ref. [9]), nel 1896, fu il primo a studiare e definire larelazione tra velocita strutturale e livello di pressione prodotto da un radiatorepiano mediante la (5.5):
p(!, P ) =j!2⇢
0
2⇡c0
Z
S
e�jk|P�Q|
k|P �Q| v(!, Q) dS (5.5)
doveQ e un secondo punto generico preso sulla superficie vibrante (Q(xQ, yQ, 0) ⌘P (xQ, yQ)) e k = !
c0e il numero d’onda del disturbo acustico.
E immediato esprimere la potenza radiata in termini di spostamento w,essendo v(!, Q) = j!w(!, Q):
⇧rad(!) =!2
2Re
n
Z
S
j!2⇢0
2⇡c0
Z
S
e�jk|P�Q|
k|P �Q| w(!, Q)w⇤(!, P ) dS dSo
=
=!4⇢
0
4⇡c0
Ren
Z
S
Z
S
sin(k|P �Q|) + j cos(k|P �Q|)k|P �Q| w(!, Q)w⇤(!, P ) dS dS
o
.
(5.6)E possibile introdurre la cosiddetta funzione di radiazione
R(!, P,Q) =e�jk(!)|P�Q|
k(!)|P �Q| . (5.7)
5.3 Definizione degli indicatori della potenza radiata 75
Tale funzione e simmetrica, ovvero R(!, P,Q) = R(!, Q, P ), e presenta unasingolarita di primo ordine, quindi eliminabile, nel punto P ⌘ Q, essendo
lim|P�Q|!0
sin(k|P �Q|)k|P �Q| = 1. (5.8)
A questo punto, sfruttando le proprieta dei numeri complessi, e possibilescrivere:
⇧rad(!) =!4⇢
0
4⇡c0
(
R
S
R
Sw⇤(!, Q) sin(k|P�Q|)
k|P�Q| w(!, Q) dS dS, se P 6= QR
S
R
Sw⇤(!, Q)w(!, Q) dS dS, se P ⌘ Q
(5.9)Specializzando la (5.9) per un pannello rettangolare di lati a e b rispettiva-mente lungo gli assi x e y, e possibile scrivere:
⇧rad(!) =!4⇢
0
4⇡c0
8
>
<
>
:
R a
0
R b
0
R a
0
R b
0
sin
h
k(!)
p(x�⇠)2+(y�⌘)2
i
k(!)
p(x�⇠)2+(y�⌘)2
w(!, x, y)w⇤(!, ⇠, ⌘) d⌘ d⇠ dy dx, se (x, y) 6= (⇠, ⌘)R a
0
R b
0
R a
0
R b
0
w(!, x, y)w⇤(!, ⇠, ⌘) d⌘ d⇠ dy dx, se (x, y) ⌘ (⇠, ⌘)(5.10)
5.3 Definizione degli indicatori della potenza radiata
L’analisi della potenza radiata da una struttura e finalizzata alla deter-minazione di alcuni parametri capaci di fornire esaurienti informazioni rela-tive alle proprieta di trasmissione del rumore. Gli stimatori piu comunementeutilizzati per valutare la potenza radiata da una superficie piana elastica sono:
• l’e�cienza di radiazione (in inglese radiation e�ciency) �;• il potere fono-assorbente (in inglese trasmission loss) TL.
Essi dipendono sia dalla superficie vibrante considerata (materiale e condizionial contorno) che dal fluido in cui essa e immersa, e non dipendono dal volumein cui essi sono misurati.
5.3.1 E�cienza di radiazione
L’e�cienza di radiazione e un parametro che esprime la potenza acus-tica radiata da una superficie vibrante, misurata relativamente al livellovibrazionale di quest’ultima. Formalmente essa e data da:
� =⇧
⇢cv2S(5.11)
dove ⇧ e la potenza acustica radiata dalla superficie vibrante di area S chevibra con velocita v in un mezzo di densita ⇢ e velocita caratteristica c. Nella
76 5 La potenza acustica radiata da un pannello piano
definizione di �, pertanto, sono presenti sia la geometria della superficie con-siderata che le caratteristiche del mezzo in cui si propaga il suono. In alcunitesti, l’e�cienza di radiazione di un componente strutturale e definita comeil rapporto tra la potenza acustica radiata dallo stesso e la potenza acusticaradiata teoricamente da un pistone infinitamente rigido, avente stessa area estessa distribuzione di velocita superficiale, ovvero:
� =⇧rad
⇧piston, (5.12)
dove ⇧piston = ⇢cv2S. Tale definizione trae origine dal fatto che un pistonerigido infinito e un radiatore perfetto. Se infatti consideriamo il movimentodi un pistone rigido infinito, questo forza le particelle di fluido a muoversi sulinee parallele normali al piano del pistone: non ce divergenza, cioe non c’ealcuna forza di reazione inerziale in quanto non ci sono bordi, e quindi la forzadi reazione per unita di area (ovvero la pressione) e dovuta esclusivamente ade↵etti di compressione.
Il rapporto
R =⇧
v2(5.13)
e detto resistenza di radiazione.I parametri introdotti sinora sono globali, ovvero riferiti all’intera super-
ficie vibrante, e sono indicatori dell’accoppiamento del campo acustico conl’intero pannello.
Risulta conveniente calcolare l’e�cienza di radiazione per ogni singolo mo-do naturale del pannello, in modo tale da identificare quale modo e causa diuna maggiore radiazione di potenza acustica: in questo caso, si parla di e�-
cienza di radiazione modale (Ref. [10]). La resistenza di radiazione del modo(m,n) del pannello e espressa come
Rm,n =⇧m,n
⌦
|v(!)|2↵ (5.14)
dove ⇧m,n e la potenza acustica media radiata da un lato del pannello in se-guito al modo (m,n) e
⌦
|v(!)|2↵
e la media temporale e spaziale del quadratodella velocita vibrazionale della superficie. Wallace (Ref. [10]) esprime quin-di l’e�cienza di radiazione del modo (m,n) di un pannello semplicementeappoggiato, di lati a e b, rispettivamente lungo gli assi x e y, come
�m,n =Rm,n
⇢cab=
⇧
⇢cab⌦
|vm|2↵ (5.15)
avendo assunto per il generico modo (m,n) un modello di velocita superficialepari a
v(!) = vm sin(m⇡x
a) cos(
n⇡y
b). (5.16)
5.3 Definizione degli indicatori della potenza radiata 77
Data la simmetria dell’intensita acustica, ricavata a partire dalla (5.5), edefiniti
↵ = ka sin(✓) cos(�), (5.17)
� = kb sin(✓) sin(�), (5.18)
e possibile calcolare per un campo di↵uso:
�m,n =64k2ab
⇡6m2n2
Z
⇡2
0
Z
⇡2
0
(
cos
sin
⇣
↵2
⌘
cos
sin
⇣
�2
⌘
[(↵/m⇡)2 � 1][(�/n⇡)2 � 1]
)
2
sin ✓ d✓ d�. (5.19)
Nella (5.19), e necessario utilizzare cos⇣
↵2
⌘
se m e un intero dispari, sin⇣
↵2
⌘
se invece m e pari; analogamente, si utilizza cos⇣
�2
⌘
se n e un intero dispari,
sin⇣
�2
⌘
se invece n e pari. Nelle Figura 5.2 e mostrato l’andamento dell’ef-
ficienza di radiazione di diversi modi propri di vibrare di un pannello le cuicaratteristiche sono descritte in Tabella 5.1.
Tabella 5.1: caratteristiche geometriche e fisiche del pannello.
lato a 1 mlato b 0.5 mspessore s 0.005 m
densita ⇢ 2700 Kg/m3
modulo di Young E 71 GPamodulo di Poisson ⌫ 0.33
In particolare, si evince che qualsiasi sia il modo considerato, l’e�cienza diradiazione tende asintoticamente ad 1, ovvero tutte le deformate del pannellotendono a diventare dei radiatori perfetti ad elevata frequenza.
Resistenza di radiazione mutua
L’e�cienza di radiazione modale �m,n sinora considerata e un indicatoredel lavoro per unita di tempo che la distribuzione di pressione generata dalmodo (m,n) compie sul modo (m,n) stesso, ovvero e un coe�ciente di auto-induzione. L’utilizzo dei soli coe�cienti di auto-induzione semplifica notevol-mente il calcolo della potenza complessivamente radiata dal pannello, in quan-to ogni modo irradia una potenza acustica indipendente dalle altre deformatemodali. In realta, la distribuzione di pressione generata dal modo (m,n) svolgeun lavoro anche il modo (i, j) generico (con i 6= m e/o j 6= n), ma spesso sitende a trascurare i coe�cienti di mutua induzione �
(m,n),(i,j) a causa del-l’elevata complessita computazionale che questi comportano. Li e Gibeling
78 5 La potenza acustica radiata da un pannello piano
(a) Modo (1,1) (b) Modo (2,1)
(c) Modo (1,2) (d) Modo (2,2)
Figura 5.2: e�cienza di radiazione �ij(f) di diversi modi del pannello al variaredella frequenza.
(Ref. [11]) forniscono un’espressione della mutual radiation resistance e il suoimpatto dell’e�cienza di radiazione complessiva del pannello.
5.3.2 Potere fonoisolante (in inglese Trasmission Loss)
Il potere fonoisolante di una superficie, ad esempio un pannello, fornisceuna misura in decibel della potenza acustica trasmessa Pt per una data poten-za incidente Pi. Al fine di calcolare un’espressione per il trasmission loss TL,e utile considerare cosa accade quando un’onda sonora interagisce con unabarriera infinita, che divide l’ambiente in cui e posta la sorgente sonora dal-l’ambiente ricevente. La Figura 5.3 mostra come parte dell’onda viene riflessanell’ambiente sorgente, una parte assorbita dalla partizione e la restante partetrasmessa nell’ambiente ricevente attraverso la superficie stessa. Definendo
• Pi la potenza dell’onda sonora incidente;• Pr la potenza dell’onda riflessa nell’ambiente sorgente;• Pa la potenza dell’onda assorbita dalla partizione (e dissipata in calore);• Pt la potenza dell’onda trasmessa nell’ambiente ricevente (chiaramente,
Pt = Prad);
5.3 Definizione degli indicatori della potenza radiata 79
Figura 5.3: decomposizione di un’onda sonora su una partizione.
e possibile scrivere (dal bilancio dell’energia per unita di tempo):
Pi = Pr + Pa + Pt. (5.20)
Dividendo ambo i membri della (5.20) per la potenza incidente Pi, si ottiene:
1 = ⇢+ ↵+ ⌧. (5.21)
Nella (5.21) sono stati introdotti i coe�cienti adimensionali:
• ⇢ = Pr
Pi, detto coe�ciente di riflessione;
• ↵ = Pa
Pi, detto coe�ciente di assorbimento;
• ⌧ = Pt
Pi, detto coe�ciente di trasmissione;
ed ognuno di essi indica, rispettivamente, l’aliquota di potenza che e statariflessa, assorbita e trasmessa.
Il trasmission loss TL e definito a partire dal coe�ciente di trasmissione⌧ , ovvero:
TL = 10 log10
1
⌧. (5.22)
TL indica, in deciBel, l’abbattimento che il suono subisce passando attraver-so una parete, e quindi permette di quantificare la potenza persa nellatrasmissione del suono tra due ambienti separati da un divisorio.
Figura 5.4: diminuzione della potenza sonora attraverso una parete avente unpotere fonoisolante di 45dB.
80 5 La potenza acustica radiata da un pannello piano
Chiaramente, se ⌧ = 1 significa che tutta la potenza sonora si trasmetteattraverso la parete, il cui potere fonoisolante e nullo. Questo e il caso, adesempio, di una porta o finestra aperta in un’abitazione, per cui le onde sonorenon hanno alcuno ostacolo durante la loro propagazione. Se invece ⌧ = 0, nonc’e trasmissione di suono, ma questo e un caso puramente ideale, in quantoattraverso una partizione c’e sempre un’aliquota di potenza trasmessa, seppurpiccola.
Andamento del TL con la frequenza
Il potere fonoisolante varia al variare dalla frequenza, oltre a dipenderedalle proprieta fisiche e geometriche della parete e dalle condizioni di vincolocui questa e sottoposta. L’andamento teorico del potere fonoisolante di unpannello omogeneo e sottile e mostrato in Figura 5.5, in cui si individuanodiverse zone in ciascuna delle quali prevale un certo fattore.
Figura 5.5: andamento tipico del trasmission loss di un pannello omogeneo alvariare della frequenza.
Innanzitutto, si puo notare che il TL assume un valore minimo in cor-rispondenza della prima frequenza naturale del pannello, ovvero della frequen-za del primo modo proprio di vibrare del pannello, dopodiche nella cosiddettazona di risonanza il valore del potere fonoisolante oscilla con picchi e valli,rimanendo su valori piuttosto bassi. In particolare, il fenomeno di risonanza abasse frequenze si verifica quando la frequenza dell’onda acustica incidente e
5.3 Definizione degli indicatori della potenza radiata 81
uguale alla frequenza di uno dei modi propri: in questo caso, infatti, si verificache la deformata modale ha una lunghezza d’onda uguale a quella dell’ondaincidente, per cui il modo proprio sollecitato e trasparente al suono, e deter-mina una riduzione complessiva del potere fonoisolante del pannello. Al primomodo normale e associata la piu importante frequenza di risonanza, in cor-rispondenza della quale il TL raggiunge un minimo. Si noti come l’ampiezzadelle valli di isolamento dipenda dal valore del fattore di smorzamento ⌘: piue elevato lo smorzamento, maggiore e l’energia meccanica vibratoria dissipatain calore. In pratica, se lo smorzamento e elevato, il pannello vibra meno, equindi e meno trasparente al suono.
Per valori della frequenza inferiori alla frequenza di risonanza naturale,la trasmissione sonora dipende essenzialmente dalla rigidezza (o, equivalente-mente, dall’elasticita) della struttura, e si ha una diminuzione di TL di 6 dBogni raddoppio della frequenza. Si parla di zona della rigidezza.
Per valori della frequenza compresi tra la zona di risonanza e una certafrequenza critica, il potere fonoisolante e governato dalla cosiddetta legge della
massa: in questa zona, si ha un aumento del TL di 6 dB per raddoppio dellafrequenza e della massa, e il comportamento della struttura dipende esclu-sivamente dalla sua massa. In questa zona, e possibile utilizzare la seguenteformula di previsione:
TLML,✓ = 10 log10
h⇣⇡⇢sf cos(✓)
⇢0
c0
⌘
2
i
[dB] (5.23)
in cui ⇢s e la massa per unita di superficie del pannello; f e la frequenza; ✓ el’angolo di incidenza dell’onda sonora; ⇢
0
c0
e l’impedenza acustica caratteris-tica dell’aria. La (5.23) vale in un campo sonoro di onde piane che arrivanosulla parete con un certo angolo di incidenza, e nel caso di incidenza normale(✓ = 0) puo essere riscritta come:
TLML,✓=0
⇡ 20 log10
(⇢sf)� 42.5[dB]. (5.24)
Dalle (5.23)-(5.24) si comprende come un raddoppio della massa del pannello,a parita di altri fattori, comporti un aumento di 6 dB del potere fonoisolante.Nel caso di campo mediamente di↵uso (ovvero onde incidente da tutte ledirezioni con inclinazioni comprese tra ✓
1
= 0 e ✓2
= 78, tipico di ambientichiusi), la relazione piu comunemente utilizzata e:
TLML,diff = 10 log10
✓
0.978⇢s⇡f⇢0c0
◆
2
ln
"
1+
�
⇢s⇡f⇢0c0
�2
1+
⇥
0.208�
⇢s⇡f⇢0c0
�2⇤
# . (5.25)
La validita della legge della massa e limitata superiormente dal fenomenodella coincidenza, conseguenza del fatto che la velocita del suono nell’aria
82 5 La potenza acustica radiata da un pannello piano
e costante al variare della frequenza mentre la velocita delle onde flession-ali nelle strutture varia con la frequenza. Le onde flessionali sono quelle chehanno maggiore importanza nella radiazione acustica delle strutture: cio edovuto principalmente al fatto che la deflessione laterale degli elementi su cuisi propagano le onde (cioe normale al piano delle onde) e rilevante rispettoalla lunghezza d’onda, e pertanto e in grado di perturbare il fluido adiacente.Nel caso di un pannello sottile, cioe di spessore molto inferiore alla lunghezzed’onda del suono alle frequenze in analisi, su cui si abbia propagazione in en-trambe le direzioni di giacitura del pannello, la velocita di propagazione delleonde flessionali e:
cb =
v
u
u
t2⇡fs
s
E
12⇢(1� ⌫2)(5.26)
dove E e il modulo di Young del materiale, ⌫ e il coe�ciente di Poisson, ⇢ ela densita, s lo spessore del pannello e f e la frequenza. Dalla (5.26) si deduceche le onde flessionali sono dispersive, ossia la loro velocita di propagazionedipende dalla frequenza. Cio le di↵erenzia dalle onde sonore, che sono nondispersive, ed e questa la causa del fenomeno della coincidenza. Esiste, infatti,una frequenza, detta frequenza critica, in corrispondenza della quale le velocitadi propagazione del suono in aria c
0
e delle onde flessionali cb coincidono,comportando una brusca riduzione del potere fonoisolante.
Figura 5.6: variazione delle velocita di propagazione del suono in aria c e delleonde flessionali cb al variare della frequenza.
Le onde sonore piane che incidono con un certo angolo su una parete sottileinfinita originano nella parete un’onda flessionale forzata avente lunghezzad’onda �tr, pari alla lunghezza d’onda di traccia dell’onda sonora incidente
�i
sin(✓) , ovvero:
�tr =�i
sin(✓), (5.27)
dove �i e la lunghezza d’onda dell’onda incidente. Il fenomeno della coinci-denza si verifica quando, per un determinato angolo di incidenza, la lunghezzad’onda di traccia dell’onda sonora eguaglia la lunghezza d’onda �b dell’ondaflessionale libera, ossia:
�b =�i
sin(✓)= �tr. (5.28)
5.4 Formulazione in coordinate discrete 83
Figura 5.7: coincidenza della lunghezza d’onda dell’onda flessionale libera edella lunghezza d’onda di traccia dell’onda sonora.
In queste condizioni, l’onda di pressione acustica viene accompagnata nelsuo movimento di compressione e rarefazione dall’onda flessionale sulla strut-tura e la stessa viene reirradiata dalla parte opposta senza subire attenuazioni,ed ecco perche si ha una forte riduzione di TL. La frequenza piu bassa perla quale si verifica il fenomeno di coincidenza si ottiene per ✓ = 0; questafrequenza e chiamata frequenza critica ed e pari a:
fc =c20
2⇡s
r
12⇢(1� ⌫2)
E[Hz]. (5.29)
Per pannelli metallici, una formula che permette di calcolare la frequenzacritica velocemente e con buona approssimazione e:
fc =12000
s[Hz] (5.30)
dove s e lo spessore espresso in mm.Come nella zona di risonanza, la caduta di TL nella zona di coincidenza e
tanto maggiore quanto minore e lo smorzamento.Al di sopra della zona di coincidenza, il potere fonoisolante TL torna ad
aumentare con una pendenza teorica di 9 dB per raddoppio di frequenza,quindi superiore a quella che si verifica nel campo di validita della legge dellamassa.
5.4 Formulazione in coordinate discrete
Obiettivo del presente schema e fornire un approccio alle coordinate dis-crete per la caratterizzazione acustica di un pannello omogeneo. Prima di cal-colare una formulazione in coordinate discrete i coe�cienti per la descrizione
84 5 La potenza acustica radiata da un pannello piano
delle proprieta acustiche del pannello, si riprendono brevemente i concetti allabase dell’analisi della risposta strutturale.
5.4.1 Riepilogo della risposta strutturale in vacuo
Si consideri un generico operatore strutturale piano rappresentato in NGcoordinate discrete, ognuna delle quali rappresenta lo spostamento w(x, y)fuori dal piano in quella posizione del pannello. Si trascurano gli spostamentiu(x, y) e v(x, y) nel piano del pannello.
Figura 5.8: pannello discretizzato in NG = 40x20 coordinate adimensionali.
L’equazione del moto nel caso di sistema non smorzato e:
[M ]{q(t)}+ [K]{q(t)} = {f(t)} (5.31)
dove [M ] e la matrice di massa, [K] la matrice di rigidezza, {q(t)} il vettoredelle coordinate generalizzate e {f(t)} il vettore della forzante agente. Se siassumono una soluzione ed una forzante armonica del tipo
{q(t)} = {w(!)}e�j!t (5.32)
{f(t)} = {F (!)}e�j!t (5.33)
il sistema puo essere riscritto come segue:
[M ]{q(t)}+ [K]{q(t)} = {f(t)} )h
[K]� !2[M ]i
{w(!)} = {F (!)} (5.34)
5.4 Formulazione in coordinate discrete 85
Se presente, lo smorzamento puo essere introdotto direttamente negli oper-atori modali, o semplicemente considerando la presenza di una matrice vis-
cosa �j![B]{w(!)} oppure introducendo una matrice di rigidezza complessa⇥
1 + j⌘(!)⇤
[K]{w(!)}.Una volta caratterizzato il sistema descritto dalla (5.31) in modi e fre-
quenze proprie, e possibile passare in coordinate modali {✓(!)} mediante lamatrice modale [�], ovvero
{w(!)} = [�]{✓(!)}, (5.35)
ottenendo un set di equazioni disaccoppiate del tipo:
mi¨✓i(!) + ki✓i(!) = fi(!), con i 2 {1, 2, . . . , NM}, NM NG. (5.36)
Nella (5.36), mi e la massa generalizzata, ki la rigidezza generalizzata e fi laforza modale generalizzata, espressa dalla relazione:
fi(!) =�
�<i> T {F (!)}. (5.37)
La risposta del pannello espressa mediante gli autovettori e:
{w(!)} = [�][H(!)][�]T {F (!)}, (5.38)
dove [H] e la matrice di trasferimento; essa e diagonale, e i suoi termini sonoespressi da:
Hi(!) =1
�mi!2 + ki. (5.39)
Nel caso di sistema smorzato, e possibile tener conto del fattore di smorza-mento ⌘ modificando la matrice di trasferimento. Ad esempio, assumendo unmodello di smorzamento proporzionale (alla massa e alla rigidezza) i terminidi [H] risultano cosı modificati:
Hi(!) =1
�mi!2 + ki + j⌘i(!)ki. (5.40)
L’area equivalente nodale
L’analisi della risposta strutturale e acustica di un pannello soggetto adun carico di pressione mediante un approccio alle coordinate discrete richiedela necessita di discretizzare anche il carico di pressione stesso. Pertanto, siintroduce il concetto di area equivalente nodale per poter passare da un caricodi pressione distribuito sull’intero pannello ad una forzante avente espressione
fi(!) =�
�<i> T {F (!)}. La forza {F (!)} si esprime come:
{F (!)} = [A]{p(!)} (5.41)
dove {p(!)} e il carico di pressione agente e [A] e la matrice delle areeequivalenti nodali.
86 5 La potenza acustica radiata da un pannello piano
A =
2
6
6
6
4
A1
0 . . . 00 A
2
. . . 0...
.... . .
...0 0 . . . ANG
3
7
7
7
5
(5.42)
La matrice [A] permette di assegnare ad ogni nodo i-esimo un’area equivalentenodale, pari a (nel caso di mesh omogenea):
Ai =a· b
(Nx � 1)(Ny � 1)(5.43)
dove a e b sono le dimensioni del pannello rispettivamente lungo le direzionix e y; analogamente, Nx e Ny sono il numero di nodi presenti sui due lati(Nx·Ny = NG).
5.4.2 Potenza radiata da un pannello in coordinate discrete
Nel paragrafo 5.1, sono calcolate le formulazioni analitiche dei parametriacustici di nostro interesse. In particolare, andiamo parimenti a fornire un’e-spressione alle coordinate discrete per ognuno di essi. Per quanto riguarda lapotenza radiata da un pannello piano, dalla (5.9) e intuitivo verificare che lasua espressione in coordinate discrete e pari a:
⇧rad(!) =!4⇢
0
4⇡c0
{w(!)}H [A][R(!)][A]{w(!)}, (5.44)
dove il pedice H indica la matrice hermitiana. Nella (5.44) si e introdotta lamatrice di resistenza di radiazione [R(!)] definita come segue:
[R(!)] =
2
6
6
6
6
6
4
1 sin(k|r1,2|)k|r1,2| . . . sin(k|r1,NG|)
k|r1,NG|sin(k|r1,2|)
k|r1,2| 1 . . . . . ....
.... . .
...sin(k|r1,NG|)
k|r1,NG| . . . . . . 1
3
7
7
7
7
7
5
, (5.45)
in cui ri,j e la distanza tra i due punti i,j. Usando le coordinate modali, epossibile esprimere il vettore degli spostamenti normali {w(!)} come:
{w(!)} = [�][H(!)][�]T {F (!)}. (5.46)
Sostituendo la (5.46) nella (5.44) si ottiene:
⇧rad(!) =!4⇢
0
4⇡c0
�
[�][H(!)][�]T {F (!)} H
[A][R(!)][A]�
[�][H(!)][�]T {F (!)}
.
(5.47)Scrivendo il prodotto centrale della (5.47) come
5.4 Formulazione in coordinate discrete 87
[⇤(!)] = [A][R(!)][A] (5.48)
e considerando che, essendo [H(!)] una matrice diagonale, [H(!)]H = [H(!)]⇤
(dove ⇤ indica il complesso coniugato), allora la (5.47) puo essere ulteriormentesemplificata:
⇧rad(!) =!4⇢
0
4⇡c0
�
{F (!)H [�][H(!)]⇤[�]T
[⇤(!)]�
[�][H(!)][�]T {F (!)}
.
(5.49)In conclusione, definendo la matrice di resistenza di radiazione modale
[Rrad(!)] =!4⇢
0
4⇡c0
[�]T [⇤(!)][�], (5.50)
l’espressione finale in coordinate discrete della potenza radiata e data da:
⇧rad(!) = {F (!)H [�][H(!)]⇤[Rrad(!)][H(!)][�]T {F (!)}. (5.51)
5.4.3 Potenza incidente su un pannello in coordinate discrete
La formulazione in coordinate discrete della (5.1) e:
⇧inc(!) =1
2Re
�
{p(!)H [A]{v(!)}
, (5.52)
per cui, una volta nota la pressione agente e la matrice delle aree equivalentinodali, ed essendo {v(!)} = j!{w(!)}, e possibile scrivere
⇧inc(!) =1
2Re
�
j!{F (!)H{w(!)}
. (5.53)
5.4.4 E�cienza di radiazione in coordinate discrete
A partire dalla (5.12), ovvero dalla definizione dell’e�cienza di radiazionecome rapporto tra la potenza radiata da un pannello piano e quella radiatada un pistone infinitamente rigido, e possibile scrivere l’equivalente relazionein coordinate discrete:
�(!) =!4⇢0
4⇡c0{w(!)}H [⇤(!)]{w(!)}
!2⇢0c02
{w(!)}H [A]{w(!)}=
!2
2⇡c20
{w(!)}H [⇤(!)]{w(!)}{w(!)}H [A]{w(!)} . (5.54)
Utilizzando le coordinate modali come descritto dalla 5.46, la (5.54) diventa:
�(!) =k(!)2
2⇡
h
{F (!)H [�][H(!)]⇤[�]Ti
[⇤(!)]h
[�][H(!)][�]T {F (!)i
h
{F (!)H [�][H(!)]⇤[�]Ti
[A]h
[�][H(!)][�]T {F (!)i . (5.55)
88 5 La potenza acustica radiata da un pannello piano
(a) ⌘ = 0.04 (b) ⌘ = 0.08
(c) ⌘ = 0.1 (d) ⌘ = 0.2
Figura 5.9: e�cienza di radiazione del pannello �(f) al variare della frequenzaper diversi valori dello smorzamento.
In Figura 5.9 e riportato l’andamento dell’e�cienza di radiazione del pannellodescritto in Tabella 5.1 per diversi valori dello smorzamento. La mesh uti-lizzata e quella illustrata in Figura 5.8. I grafici sono ottenuti considerandoun’onda piana normale (✓ = 0).
Dai grafici e possibile osservare che il pannello diventa un radiatore perfettoin corrispondenza della frequenza critica fc (riportata in tratteggio), qualsiasisia il valore dello smorzamento.
5.4 Formulazione in coordinate discrete 89
5.4.5 E�cienza di radiazione modale auto e mutua
In accordo con Wallace, Li e Gibeling, l’espressione (5.56) permette dicalcolare l’e�cienza di radiazione modale di una coppia di modi generica (i, j).In particolare, si presta al calcolo numerico sia delle self radiation e�ciences
(nel caso i = j) che delle cross mutual radiation e�ciences (se i 6= j).
�(!)i,j =k(!)2
2⇡
{�}<i>H
[A][R(!)][A]{�}<j>
{�}<i>H [A]{�}<j>(5.56)
Nella Figura 5.10 e riportato il confronto tra le curve dell’andamento dell’-e�cienza di radiazione calcolate secondo il modello analitico di Wallace (vediFigura 5.2) e i punti ottenuti mediante l’approccio discreto. Si considera ilpannello di Tabella 5.1 senza alcun tipo di smorzamento. La mesh utilizzatae quella illustrata in Figura 5.8. In questo caso, in analogia con Wallace, siconsidera un campo sonoro perfettamente di↵uso.
(a) Modo (1,1) (b) Modo (2,1)
(c) Modo (1,2) (d) Modo (2,2)
Figura 5.10: confronto tra l’e�cienza di radiazione modale calcolata analiti-camente (—) e quella mediante approccio discreto (⇤) per diversi modi alvariare della frequenza.
90 5 La potenza acustica radiata da un pannello piano
In Figura 5.11 sono riportati i coe�cienti di accoppiamento per diversecoppie modali, ed in particolare si nota che:
• ad elevate frequenze, tendono asintoticamente a zero, per cui e lecitotrascurarli e considerare solo i coe�cienti di auto-induzione;
• possono essere negativi, ovvero il modo acquista energia dal fluido.
Figura 5.11: e�cienze di radiazione auto e mutua per il primo modo delpannello in funzione della frequenza.
5.4.6 Coe�ciente di trasmissione e Trasmission Loss in coordinatediscrete
La formulazione del TL in coordinate discrete passa evidentemente at-traverso la formulazione del coe�ciente di trasmissione, che come detto e paria:
⌧ =⇧rad
⇧inc. (5.57)
Date le (5.46),(5.49) e (5.53), l’espressione del coe�ciente di trasmissionediventa:
5.4 Formulazione in coordinate discrete 91
⌧ =!4⇢0
4⇡c0
�
{F (!)H [�][H(!)]⇤[�]T
[⇤(!)]�
[�][H(!)][�]T {F (!)}
1
2
Re�
j!{F (!)H [�][H(!)][�]T {F (!)} , (5.58)
da cui si calcola il trasmission loss applicando la (5.22).In Figura 5.12 sono illustrati gli andamenti del TL con la frequenza per
diversi valori dello smorzamento per il pannello sinora analizzato. Inoltre, suogni singolo grafico e riportato l’andamento della legge (5.24) e sono evidenzi-ate anche tutte le frequenze proprie del pannello. Il modello di pressione inci-dente utilizzato e quello descritto dalla (5.3), con ✓ = 0 (onda piana normale).Dalla Figura 5.12 si vede chiaramente come un aumento dello smorzamentoriduca nettamente le oscillazioni del TL, soprattutto nelle zone di risonanzae di coincidenza. Si noti inoltre come la legge di massa descriva con buonaapprossimazione l’andamento del potere fonoisolante nella zona centrale delgrafico.
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
Author's personal copy
Journal of Fluids and Structures 25 (2009) 321–342
Hydrodynamic and hydroelastic analyses of a plate excitedby the turbulent boundary layer
E. Ciappia, F. Magionesia, S. De Rosab,!, F. Francob
aINSEAN-Istituto Nazionale per Studi ed Esperienze di Architettura Navale, Via di Vallerano 139, 00128 Roma, Italybælab-Acoustics and Vibration Laboratory, Dipartimento di Ingegneria Aerospaziale, Universita degli Studi di Napoli ‘‘Federico II’’,
Via Claudio 21, 80125 Napoli, Italy
Received 4 October 2007; accepted 11 April 2008Available online 11 October 2008
Abstract
Recent studies have demonstrated that the characterisation of wall-pressure fluctuations for surface ships is of greatinterest not only for military applications but also for civil marine vehicles. A ship model towed in a towing tank is usedto perform pressure and structural measurements at high Reynolds numbers. This facility provides ideal flow conditionsbecause background turbulence and noise are almost absent. Free surface effects are naturally included in the analysis,although in the particular section chosen for the present study do not have significant consequences on pressure spectra.Scaling laws for the power spectral density are identified providing the possibility to estimate pressure spectra fordifferent flow conditions and in particular for full-scale applications. The range of validity of some theoretical modelsfor the cross-spectral density representation is analysed by direct comparison with experimental data of wall-pressurefluctuations measured in streamwise and spanwise direction. In a second phase, an indirect validation is performed bycomparing the measured vibrational response of an elastic plate inserted in the catamaran hull with that obtainednumerically using, as a forcing function, the modelled pressure load. In general, marine structures are able to acceptenergy mainly from the sub-convective components of the pressure field because the typical bending wavenumber valuesare usually lower than the convective one; thus, a model that gives an accurate description of the phenomenon at lowwavenumbers is needed. In this work, it is shown that the use of the Chase model for the description of the pressure fieldprovides a satisfactory agreement between the numerical and the experimental response of the hull plate. Theseexperimental data, although acquired at model scale, represent a significant test case also for the real ship problem.r 2008 Elsevier Ltd. All rights reserved.
Keywords: Wall-pressure fluctuations; High Reynolds number flow; High-speed vessels; Theoretical models; Vibrational response
1. Introduction
Vibrations of elastic structures excited by the turbulent boundary layer (TBL) are of interest for interior and exteriornoise emission problems in aeronautical, automotive and marine applications. In particular, new requirements in termsof comfort on board high-speed ships for passenger transportation have addressed the attention of the scientificcommunity to the identification and to the characterisation of noise sources including those of hydrodynamic nature.Recent studies performed in the framework of the European RTD project NORMA (Noise Reduction for Marine
ARTICLE IN PRESS
www.elsevier.com/locate/jfs
0889-9746/$ - see front matter r 2008 Elsevier Ltd. All rights reserved.doi:10.1016/j.jfluidstructs.2008.04.006
!Corresponding author: Tel.: +39081 7683581; fax: +39 081 624609.E-mail address: [email protected] (S. De Rosa).
Author's personal copy
Applications G3RD-2001-0393) demonstrated that, at least for new concept design fast ships, flow noise sources, e.g.,the TBL, play an important role above 30 knots.The typical way to characterise wall-pressure fluctuations (WPF) is via experimental tests performed in suitable
facilities like wind or water tunnels. In fact, direct numerical simulations (DNS) or large eddy simulations (LES) areoften not applicable in the case of complex geometries and realistic flow conditions (high Reynolds numbers) due to thelimitation of computational resources. DNS of WPF were performed by Choi and Moin (1990), analysing the channelflow problem for ReW ! UW/n ! 287. Furthermore, Chang et al. (1999) analysed the influence of the different TBLvelocity components on the wavenumber pressure spectra in a channel flow for a Reynolds number, based on thechannel half width, equal to 3200. Recently, Lee et al. (2005a) proposed a new methodology to calculate numericallywall-pressure spectra. The method uses the predicted mean flow field obtained from RANS calculations and a spectral
ARTICLE IN PRESS
Nomenclature
a streamwise plate lengthAreai equivalent area in finite element approachb spanwise plate lengthc speed of sound in watercB bending wave speedD flexural stiffness of the plated sensor dimensiond0 nondimensional length: d0 ! d/d*
d+ nondimensional length: d+ ! dut/nFr Froude numberg acceleration of gravityH structural transfer function diagonal matrixH shape factor: H ! d*/Wh thickness of the platei imaginary unitj index for the jth modal componentk acoustic wavenumberkc convective wavenumberkB bending wavenumberLpp length between perpendicularsm, n modal indicesme experimental added mass functionmn numerical added mass functionN shape function vector in finite element
approachNG number of grid of the finite element meshNM number of mode shapesReW Reynolds number, ReW ! UW/nRet Reynolds number, Ret ! dut/nRpp cross-correlation functionSaa plate acceleration response (auto-spectral
density)SW matrix of the cross-spectral densities of the
plate displacementSF matrix of the cross-spectral densities of the
generalised loadSFF matrix of the cross-spectral densities of the
equivalent loadu+ wall unit, u+ ! U/utut friction velocityU free-stream velocity
Uc convection velocityx streamwise reference axisy spanwise reference axisy+ wall unit, y+ ! yut/n
Greek symbols
g1 streamwise decay factorg3 spanwise decay factorG coherence functiond boundary layer thicknessd* displacement thicknessDx extension of each finite element in streamwise
directionDy extension of each finite element in spanwise
directionZ spanwise spatial separationZp plate modal damping coefficientW momentum thicknessy phase functionn kinematic viscosityx streamwise spatial separationrs plate material densityr fluid densityt time delaytw wall shear stressFpp auto-spectral density of the wall-pressure
distribution due to the turbulent boundarylayer
Fpp0 cross-spectral density of the wall-pressuredistribution due to the turbulent boundarylayer
U eigenvector matrixo circular radian frequencyoj natural circular frequency of the jth modeomn dry natural circular frequencies of the plateomn wet natural circular frequencies of the plate
Matrix and complex operators
* complex conjugate operatorT transposition operator
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342322
Author's personal copy
correlation model, and integrates across the TBL. The method was validated both for an equilibrium flow atReW ! 3582 and for a non-equilibrium flow resulting from flow over a backward-facing step. Using the samemethodology, Lee et al. (2005b) characterised wall-pressure spectra for a surface ship model including the effects of hullcurvature and of the free surface. The comparison of the scaled spectra, obtained while varying the axial location, andthe distance from the free surface with spectra, obtained for an equilibrium flow, showed that, in several locations, theformer deviate from the canonical case.On the other hand, there are many experimental works related to WPF, most of them devoted to the identification of
the appropriate scaling laws for the auto-spectral density (ASD) for zero pressure gradient flow. The pressure ASDfrequency range is subdivided according to the boundary layer regions that give contributions to wall-pressure spectrawhere different scaling variables hold. In particular, Farabee and Casarella (1991) identified four frequency ranges intheir data: the low-frequency and the mid-frequency range where outer variables hold, the high-frequency range whereinner variables hold, and an overlap scale-independent region proportional to o"1, whose extent depends on theReynolds number. With respect to this point, Keith et al. (1992) presented the most extensive comparison among manyavailable experimental data obtained in fully developed and developing channel flow, in fully developed pipe flow and inwind tunnel, over a wide range of Reynolds numbers, with the aim of identifying the best choice for the scalingparameters in the different frequency regions. Goody (1999) performed an experimental campaign in a two-dimensionalboundary layer for ReW values ranging from 7800 to 23 400, investigating different combinations of scaling parameters.Finally, a detailed review of the state-of-the-art on this subject can be found in Bull (1996).The spatial characterisation of WPFs was first analysed by Corcos (1963) on the basis of measurements performed by
Willmarth and Wooldridge (1962). Assuming the validity of separation of variables in the streamwise and spanwisedirections, Corcos stated an exponential decay for the cross-spectral density (CSD) as a function of the similarityvariables ox/Uc and oZ/Uc, where Uc is the convection velocity, and x and Z are the streamwise and spanwise spatialseparation, respectively. Several authors have performed comparisons between measured CSD data and Corcos model(Blake, 1986; Bull, 1967); in particular, Farabee and Casarella (1991) from the analysis of their experimental dataprovided, at least in a certain nondimensional frequency range, a confirmation of this pressure behaviour for a wideseries of spatial separations in streamwise direction and for different flow velocities or local Reynolds number values.The success of the Corcos model lies in its simplicity and in its predictive character since the model parameters aresubstantially case-independent. Nevertheless, it is generally stated that Corcos model gives a correct representation ofthe WPF behaviour in the convective domain, i.e. when the wavenumbers are close to the convective wavenumberkc ! o/Uc. On the contrary, in the sub-convective domain the white Corcos spectrum largely overpredicts the realamplitude. Since for several applications and in particular in the case of underwater and surface marine vehicles, theconvective wavenumber is greater than the bending wavenumber kB ! o/cB, it is of primary importance to evaluatecorrectly the sub-convective domain of pressure spectra that corresponds to the high-sensitivity region for the structure.Several new models, some directly derived by the Corcos one (Efimtsov, 1982; Ffowcs Williams, 1982), others
overcoming the Corcos multiplicative approach such as those by Chase (1980) and Smol’yakov and Tkachenko (1991),were developed to improve the estimation of pressure spectra in this region. A comparison between the predictions ofthe radiated acoustic power by rectangular plates was carried out numerically by Graham (1997); it was performed fordifferent test conditions and applying the above models. It was there concluded that the use of sophisticated modelssuch as the Chase one is needed only for structures that do not exhibit coincidence, but that for aircraft the best model isthe one which provides an accurate description of the convective peak, thus suggesting the use of the Efimtsov model.Nonetheless, no experimental evidence supporting these conclusions was reported in Graham’s work. However, thespatial domain comparison between pressure experimental spectra and theoretical models cannot definitively indicatethe best in describing the different wavenumber regions. It is usually possible to find a set of parameters for each modelable to provide a good data fit. It is clear that most of the energy of WPF is concentrated around the convective peakand then any correlation data is mainly the representation of the convective character of the TBL. Unfortunately, onlyfew experimental data concerning direct measurements of the wavenumber-frequency spectrum are available(Abraham, 1998; Choi and Moin, 1990; Panton and Robert, 1994; Farabee and Geib, 1991; Manoha, 1996) and,among them, a big spread of the spectra magnitude at low wavenumbers is present as reported for example by Hwangand Maidanik (1990).In order to overcome the limitations of flow measurements, an indirect approach to estimate the validity of different
models for WPF representation, based on the analysis of the response of simple elastic structures to the TBL load, isproposed here. The same idea was recently applied by Finnveden et al. (2005), who compared the measured response ofa flat plate with those obtained numerically using modelled pressure loads. This work presented the first and, to theauthors’ best knowledge, the only correlation between aerodynamic and structural data measured in the same facilityand with the same set-up. They suggested a modified version of the Corcos model by introducing a frequency and flowspeed dependence on the parameters and of the Chase model by introducing two new parameters to better fit the
ARTICLE IN PRESSE. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 323
Author's personal copy
spanwise coherence to measurements. Despite the modifications made, the conclusion was that, above the aerodynamiccoincidence (kc ! kB), only the Chase model, that does not make use of the multiplicative approach, provides a fairagreement with experimental data. In this work, the lower kB/kc ratio was 0.4 and the average difference between themodified Chase model predictions and the experimental data was 5 dB. Furthermore, Hambric et al. (2004), althoughretaining the multiplicative approach, proposed a modification of Corcos streamwise coherence to better represent thelow wavenumber domain. The model was compared with the experimental response of an elastic plate measured by Hanet al. (1999). The ratio between the structural wavenumber in flow direction and the convective wavenumber wasbetween 0.3 and 0.8 and the agreement with the experimental data was quite good. On the other hand, Han et al. (1999)chose Smol’yakov and Tkachenko to model the surface pressure field. The comparison with measurements wasperformed using the energy flow analysis method to predict the numerical plate response thus, direct information aboutthe validity of the pressure model are difficult to extract from their data.The aim of this work is to develop a general procedure based on the identification of the scaling laws and on the use of
predictive models for the surface pressure field suitable for application to full-scale problems. In particular, the capabilities ofCorcos and Chase models to predict the response of an elastic plate inserted in the hull of a ship model were investigated onthe basis of hydrodynamic and vibration data acquired, at high Reynolds numbers, in a towing tank. In a first step, pressuredata were analysed to provide their spectral characteristics. This analysis is fundamental to identify the scaling laws for theASD and the free parameters contained in the CSD wall-pressure fluctuation models. The high Reynolds number achievedwith this set-up provides an interesting extension to the previous analyses. In a second phase, a comparison between thenumerical response of the plate obtained using the two models and the experimental response is provided. Since in thepresent problem the convection velocity is very low, the ratio between the bending and the convective wavenumber issensibly lower than those previously analysed in the technical literature. This fact is fundamental for real size marineapplications for which hydrodynamic coincidence appears, even for high-speed vehicles, at very low frequency.This first section is aimed to frame the work in the proper existing literature. Section 2 presents the experimental set-
up and all the data concerning the acquisition instrumentation. The treatment of the pressure data is the specificargument of Section 3. Section 4 is fully devoted to the analysis of the structural response and the final comparisonbetween predictive and measured data. Section 5 presents the concluding remarks with some foreseen activities. For thesake of completeness, a graphic workflow has been also added in Chart 1.
2. Experimental set-up
2.1. Pressure measurements
The experiments were performed on a 1:15 scale model of the fast catamaran Jumbo CAT (Fig. 1). The scale of themodel was chosen according to Froude similarity: Fr ! U=
!!!!!!!!!!gLpp
pwhere Lpp is the length between perpendiculars, i.e.
ARTICLE IN PRESS
Chart 1. Logical workflow.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342324
Author's personal copy
the length of the vessel along the waterline between the forward and aft perpendiculars, as depicted in Fig. 1. Themaximum model width is 1.467m, Lpp is 4.635m and its draft in calm water conditions is 0.2m.The experiments were carried out in the INSEAN towing tank no. 2 which is 220m long, 9m wide and 3.5m deep
and is equipped with a carriage that can reach a maximum speed of 8m/s. The use of this kind of facility creates idealflow conditions because background turbulence and noise are avoided. The measuring section was chosen in the sternpart of the ship bottom where the hull surface is almost flat. To perform pressure measurements a 2 cm thick rigidplexiglas plate was inserted in the hull bottom where pressure transducers were positioned.The basic set-up is presented in Fig. 2 and consisted in an array of nine transducers in streamwise direction and five
transducers in the spanwise direction flush-mounted with the plate at constant distance of 1 cm between each other.Additional tests were performed with 13 transducers mounted in streamwise direction within a maximum distance of40 cm. Thus, the first pressure sensor was located at x/Lpp ! 0.88 while the last at x/Lpp ! 0.97. The minimum distancebetween transducers was constrained by the transducers’ maximum external size while the maximum distance waschosen according to the fact that for x/d*420 the longitudinal correlation is almost zero as demonstrated by previousmeasurements (Bull, 1967; Blake, 1986). Pressure signals were acquired in calm water conditions with fixed trim andsink and for two different ship model velocities: 3.31m/s (25 knots) and 5.3m/s (40 knots) corresponding to Fr ! 0.49and 0.78, respectively. The measurement error in the carriage velocity was within 1% of the nominal mean velocity.Differential piezoresistive pressure transducers Endevco 8510-B, characterised by a maximum range of 2 psig and by
a certified flat response until 14 kHz were used to measure pressure fluctuations. The transducers were staticallycalibrated in water using known water level heights. All the transducers showed a linear trend; however, the deviationaround the regression line of the data points used for the sensitivity estimate was evaluated. The standard error ofestimate was very low for all the transducers, of the order of 1%. Moreover, the total error due to thermal sensitivity,nonlinearity and pressure hysteresis, as reported in the data sheet, is around 1%. The rectangular sensing element hasan area of 1" 0.3mm2, hence the effect of the finite size of the transducers surface can be expressed in term of thenondimensional parameters d0 ! d/d* and d+ ! dut/n, where d is the bigger sensor dimension.Pressure signals were acquired and amplified by the 16 channels acquisition system PROSIG; the sampling frequency
was 12.5 kHz, the acquisition length was 15 s. Several repetitions of the test (typically 12–15) under nominally the sameconditions were performed. The data record began a few seconds after the achievement of steady conditions. The
ARTICLE IN PRESS
Fig. 1. Catamaran model and sketch of the reference length, Lpp.
Fig. 2. Set-up for pressure measurements (left) and top view of the installation of the plexiglas plate (right).
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 325
Author's personal copy
reaching of a stationary random process was verified by comparing the ensemble average value, autocorrelation andcross-correlation of the WPFs of different runs.Concerning the flow velocity field, the TBL mean parameters (as used in the data analysis and shown in Table 1) were
obtained by available RANS simulations performed in the past over the whole model. This solution was, in this case,preferred because the experimental evaluation of the boundary layer velocity profiles in a towing tank, althoughpossible, is a time-consuming process. In fact, it is clear that the acquisition time is limited for each carriage run,especially for the higher velocities, and that the time needed for the re-establishment of calm water conditions betweentwo consecutive runs is at least 10min. A detailed description of the numerical code is provided in Ciappi andMagionesi (2005) and in the references cited there. The numerical errors can be predictable in an uncertainty of about4% in the estimation of the TBL parameters from the velocity profiles.
2.2. Vibration measurements
Vibration measurements were performed replacing the rigid plate with a flexible one. The panel, made of plexiglas, is0.58m long, 0.2m wide and 0.003m thick, it was fixed to the hull model with some mastic in order to provideimpermeable conditions and to reduce the transmission of model vibrations.A preliminary series of numerical analyses have been performed to exclude the presence of significant plate
deformations due to static and dynamic pressure loads. In fact, for all the flow speeds under consideration, themaximum displacement was predicted to be 1% of the longitudinal plate dimension.The acceleration responses were acquired in eight different points (one for each carriage run) randomly chosen on the
plate surface. A Bruel & Kjaer piezoelectric accelerometer type 4393 characterised by a sensitivity of 4.19mV/g and aweight of 2.2 g was used for the acquisition. Its mass was negligible with respect to the plate mass in the frequency rangeof interest. The accelerometer signal was amplified by a Bruel & Kjaer amplifier type 2635 and acquired with a samplingfrequency of 12.5 kHz by a National Instruments PXI 6052E acquisition system. Preliminary dry and wet calm watertests were performed with the same set-up and instrumentation to evaluate the plate’s natural frequencies, hence theadded fluid mass and the modal damping factors. Two additional accelerometers were mounted on the ship’s hull andon the connecting system to acquire the spurious vibrations transmitted by the carriage structure.
3. Pressure analysis
In the following sections, the results of the experimental programme devoted to the characterisation of wall-pressurespectra are presented. The purpose of this analysis was to verify the pressure scaling laws and to provide a generalmodel for its spatial behaviour. To this aim, ASDs, streamwise and spanwise coherences and convection velocities wereextracted from measurements. Although free surface effects were naturally present, pressure gradient values calculatedon the basis of numerical simulations can be considered negligible in the measuring section. In Fig. 3, the velocityprofiles obtained numerically, used to extract the mean TBL parameter values of Table 1, are shown in wall units y+,u+. From preliminary analysis it was decided to consider only the Corcos and Chase models as antagonists in thisanalysis. In fact, the Efimtsov model has the same trend as Corcos’ in the low wavenumber domain but, this last is to bepreferred because describes the wall pressure by a simpler expression containing less empirical parameters. The FfowcsWilliams model was built to extend Corcos model to the acoustic domain, which is beyond the purpose of this analysis;finally, the Smol’yakov and Tkachenko model does not fit well the present hydrodynamic data.
3.1. Power spectral density: scaling laws
The analysis of the scaling laws for the ASD is essential to understand the contribution of the different boundarylayer regions to WPFs. Moreover, due to the particular section chosen to perform pressure measurements and the
ARTICLE IN PRESS
Table 1Mean flow velocity parameters: numerical estimation
U (knots) U (m/s) d (m) d* (m) H ut (m/s) ReW ! UW/n Ret ! dut/n d0 ! d/d* d+ ! dut/n
25 3.31 0.12 0.0142 1.27 0.11 29 535 10 153 0.07 8440 5.31 0.113 0.0137 1.3 0.1626 42 807 14 133 0.073 125
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342326
Author's personal copy
relatively high speed of this vessel, local Reynolds numbers were sensibly high (ReW ! 29 535 for 3.31m/s andReW ! 42 807 for 5.31m/s), providing an interesting extension of the validity of the scaling laws for high Reynoldsnumber. Following the frequency range division proposed by Farabee and Casarella (1991), three different spectralregions can be identified: at very low frequency, the spectra collapse using the classical outer flow variables d* and U,showing a o2 behaviour, advising that sources are associated with the large-scale structures. In the low-mid-frequencyrange, the pressure auto spectral densities collapse into a single curve when scaled with the friction velocity ut, the wallshear stress tw and d, implying that the mid-frequency structures are related with turbulence activity in the outer regionof the boundary layer. In this interval, pressure spectra exhibit their maxima for od/ut ! 50. Finally, at high-frequencyinner variable scale, which employs ut, tw and n, allows the collapse of the data independently of the Reynolds number,suggesting that sources are associated with the buffer region of the wall layer. Moreover, between mid- and high-frequency an overlap region, characterised by an o"1 decay, exists where both outer and inner variable scales hold. Thisregion is related to the turbulence activity in the logarithmic part of the boundary layer and its extension depends on theReynolds number value. Recently, Ciappi and Magionesi (2005), considering the frequency division stated by Farabeeand Casarella provided another confirmation of the proposed scaling laws. ASDs were determined using 700 spectralaverages for each signal and a Hamming window function is used to reduce bandwidth leakage. According to classicaltheory of random data (Bendat and Piersol, 1991), the statistical convergence error was defined as !r ! 1=
!!!!!ndp
, where nd
is the number of spectral averages. In the present analysis, the data random error was equal to 73.8%; thus, theuncertainty in the calculated pressure spectra, obtained by considering the above and all the previously definedexperimental sources of error (see Section 2), was within the range of 71 dB.In Fig. 4, a typical ASD signal is displayed showing high peaks in the frequency region between 8 and 20Hz due to
structural vibrations of the carriage and of the connecting system. The peaks were eliminated, for the ASD analysis,using suitable relations based on the coherence function (Bendat and Piersol, 1991) between two pressure sensorslocated sufficiently far from each other to be correlated only by structural vibrations. The result of this cleaningprocedure is shown in the same figure. Fig. 5 shows the cleaned ASD for the two different test velocities, scaled usingouter flow variables: od=ut; Fpp#o$u2t=t
2wd; they are shown and compared with the results of Farabee and Casarella
(1991) obtained for ReW ! 6050 and with the results of Blake (1970) [extracted from Lee et al. (2005a)] obtained forReW ! 8210. From the inspection of the figure, it is evident that there is an excellent agreement of the presentexperimental curves in the low-mid-frequency range, i.e. for 20ood/uto1760. Moreover, for od/uto800, they are in avery good agreement with the Farabee and Casarella curve and in fair agreement with the Blake data. Finally, thescaled spectra achieved the maximum value for od/utE63. Low-frequency behaviour (od/uto5) is not analysed, sincefrequency resolution is too poor to obtain a realistic trend in this region. Fig. 6 shows the present wall-pressure spectraand the results of Bull and Thomas (1976), Farabee and Casarella (1991) and Blake (1970) scaled on inner flow
ARTICLE IN PRESS
Fig. 3. Streamwise velocity profiles: numerical estimation.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 327
Author's personal copy
variables: on=u2t ; Fpp!o"u2t=t2wn. According to Blake (1986), attenuation in the spectra should occur approximately for
od/U41.2 that implies on=u2t40:3 or 0:42, depending on flow velocity. A collapse of the two sets of measurementsoccurs at high frequency, i.e. for 0:033oon=u2to0:3. The Bull and Thomas and Blake data are in excellent agreement inthe same frequency range, although the Blake curve is higher for higher nondimensional frequencies. On the contrary,the Farabee and Casarella curve shows quite a different trend, characterised by slower high-frequency decay.Differences can be due to spectra attenuation caused by the finite sensor dimensions and, when considering similar d+
values, to the use of different pressure transducers. In particular, the Farabee and Casarella and Blake data wereobtained using open pinhole microphones with d+ # 33 and 68, respectively, while the Bull and Thomas data wereobtained using both filled pinhole microphones and piezoelectric transducers for d+ # 44. For the present data,
ARTICLE IN PRESS
Fig. 5. Wall-pressure spectra scaled on outer flow variables.
Fig. 4. Measured and cleaned pressure auto-spectral density.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342328
Author's personal copy
obtained with piezoresistive pressure transducers, d+ was equal to 84 for the lower velocity and to 125 for the higher.Bull and Thomas (1976) showed that the use of an open pinhole microphone leads to a higher amplitude of pressurespectra for on=u2t40:1. This fact can explain the mismatch between different sets of measurements. Finally, due to thehigh Reynolds numbers, the overlap region had a considerable extension. From the analysis of the range of validity ofthe outer and inner scales or from the direct inspection of the range of validity of the o!1 law, included in both Figs. 5and 6, it can be concluded that the overlap region extends in the range 0:033 Ret " 335o#od=ut$o1760 or0:033o#on=u2t$o#1760=Ret$ " 0:174 where the lowest value of Ret was used.
3.2. Cross-spectral density
The spatial characterisation of WPFs is now analysed extracting from the experimental data the streamwiseFpp0 #x; 0;o$ and the spanwise Fpp0 #0; Z;o$ CSDs. Since the CSD is a complex quantity, as usual, the coherence function
G#x; Z;o$ " jFpp0 #x; Z;o$j. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
F#1$pp #o$ % F#2$pp #o$q
, where in the square root appear the ASDs of the two pressure signals, is
used to display the results and to discuss their comparison with the Corcos and Chase theoretical models. Coherencespectra were obtained for quite a large number of streamwise spacings (0:09px=dp1:44), while only few spanwiseseparations were considered #0:09pZ=dp0:36$, as the coherence decay of the pressure field is very fast in this direction.
3.2.1. The Corcos modelThe model formulated by Corcos expresses the CSD as a product of functions in longitudinal and lateral direction
separately. Moreover, he postulated that the CSD behaviour depends only on the similarity variables ox/Uc and oZ/Uc
with a decay represented by an exponential function. The model for the CSD is given by
Fpp0 #o; x; Z$ " Fpp#o$ ei#ox=Uc$ e!g1 jox=Uc j e!g3joZ=Uc j, (1)
where g1 and g3 are the decay factors.The streamwise coherences relative to the free-stream velocity of 5.3m/s are plotted against the CSD phase y(x,
o) " !ox/Uc in Fig. 7; different curves refer to different values of the nondimensional length x/d. It is evident that athigh frequency a collapse of the coherence spectra into an universal curve occurs independently of the spatialseparation. The theoretical streamwise coherence G#x;o$ " e#!g1 jox=Ucj$ derived from Eq. (1) is plotted in the same figurewith a decay coefficient g1 equal to 0.125. Slightly different values are reported in the literature: Bull (1967) foundg1 " 0.1, Farabee and Casarella (1991) found a decrease in the g1 value with increasing velocity passing from 0.145 forthe lower one to 0.125 for the higher one. On the other hand, in the low-frequency region, a lack of similarity scaling
ARTICLE IN PRESS
Fig. 6. Wall-pressure spectra scaled on inner flow variables.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 329
Author's personal copy
occurs because as far as ox/Uc-0 the coherences do not tend to unity as Corcos model predicts. Unit coherence wouldimply that the low-frequency components should be correlated for all spatial separations: this is physically unrealistic.From the observation of the figure it can also be noted that all curves exhibit a maximum that is indicated by Farabeeand Casarella (1991) as the limit value below which the similarity variables do not hold anymore. The sameconsiderations can be drawn for 3.3m/s; in particular, the best fit of the experimental data is found for the samevalue of g1.Less experimental data concerning spanwise coherence are available in the literature: the value usually suggested for
the decay coefficient g3 is 0.7 (Corcos, 1963; Blake, 1986; Bull, 1967). Fig. 8 shows curves of spanwise coherence relative
ARTICLE IN PRESS
Fig. 7. Streamwise coherence at U ! 5.3m/s.
Fig. 8. Spanwise coherence at U ! 3.3m/s.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342330
Author's personal copy
to the lower velocity for various nondimensional separations Z/d as a function of the similarity variable oZ/Uc. Thethick solid line represents the Corcos model with g3 equal to 0.7. The exponential function seems to correctly estimatethe measured coherences, above their maxima, for value of the nondimensional frequency oZ/Uc40.8. Also in this case,velocity variations seem not to have an influence on the decay coefficient value.
3.2.2. The Chase modelA descriptive model of the wavenumber-frequency spectrum of turbulent wall-pressure was proposed by Chase
(1980) with the intention of overcoming the limitations of models built to capture the characteristics of the convectivedomain only. Starting from the properties of the fluctuating velocity spectrum and considering its relation with thefluctuating pressure, Chase proposed a model able to correctly describe the pressure field in the convective and sub-convective domains. The inverse Fourier transform of the Chase (1980) expression is here proposed in its complete formas determined by Josserand and Lauchle (1989) because, as it will be clear in the following, the assumptions at the basisof some simplifications made by Chase are not necessarily fulfilled. Thus, the complete Chase model in the space-frequency domain is given by
Fpp0 !o; x; Z" # Fpp!o"!Cmf m e$zm e$i!ox=Um" % Ctf t e$zt ei!ox=U t"",
f m #Um!!!!!!!!!!!!!!!!!!!!!!
U2c % h2
mu2t
q a$3m 1% zm % a2mm2m
1$ z2m1
zm% 2iammmzm1
" #,
f t #Ut!!!!!!!!!!!!!!!!!!!!!
U2c % h2t u2t
q a$3t 1% zt % a2t 1% m2t $z2t3 % m2t z2t1
zt
" #% 2iatmtzt1
" #,
zm1 #ammmox
Um; zt1 #
atmtoxUt
; zm3 #amoZUm
; zt3 #atoZUt
; zm #!!!!!!!!!!!!!!!!!!!!z2m1 % z2m3
q,
zt #!!!!!!!!!!!!!!!!!z2t1 % z2t3
q,
Cm #rm
rtf t0 % rmf m0
; Ct #rt
rtf t0 % rmf m0
; rm # 1$ rt,
f m0 #Um!!!!!!!!!!!!!!!!!!!!!!
U2c % h2mu2t
q a$3m !1% a2mm2m"; f t0 #
Ut!!!!!!!!!!!!!!!!!!!!!U2
c % h2t u2t
q a$3t !1% a2t !1% m2t "", (2)
Fpp!o" # rma%r2u4to$1a$3m
Um!!!!!!!!!!!!!!!!!!!!!!U2
c % h2mu2t
q !1% m2ma2m" % rta%r2u4to
$1 Ut!!!!!!!!!!!!!!!!!!!!!U2
c % h2t u2t
q a$3t !1% a2t !1% m2t "",
hi #Ucmi
ut
!!!!!!!!!!!!!1$ m2i
q ; Ui #Uc
1$ m2i; a2i #
1
1$ m2i
$ %%
Ui
bmdo
" #2
; i # m; t.
It can be noted that six free parameters have to be determined by comparison with experimental data. The valuessuggested by Chase, based on the comparison between the experimental data of Bull (1967) and limiting values ofEq. (2), are the following: bm # 0.756, bt # 0.378, mm # 0.176, rt # 0.389, and a+ # 0.766. As pointed out by Chase,these values are not supposed to be universal, as already shown for example by the measurements of Finnveden et al.(2005). In fact, the attempt to fit the experimental data with the Chase model using these values for the free parametersgave unsatisfactory results. Thus, the first five parameters were evaluated using a nonlinear least-square formulationbased on a trust-region approach. The best fit of the experimental streamwise and spanwise coherences for both velocityconditions is found for: bm # 0.51, bt # 0.35, mm # 0.13, mt # 0.4, and rt # 0.3. Fig. 9 presents the comparison amongthe experimental streamwise coherence for U # 5.3m/s, the Chase model, using the identified parameters, and theCorcos model for different values of the ratio x/d. In Fig. 10, the same comparison is shown for the spanwise coherencerelative to U # 3.3m/s. At this time, some considerations must be made: the coefficient bm gives the position of the ASDmaximum that, according to the present measurements occurs for od/utE60; on the other hand, using Chase relations,the maximum is given by o #
!!!2p
Uc=bmd, thus bm # 0.51 is required if Uc # 0.65U is assumed. In fact, the value 0.756suggested by Chase represented an average between the value 0.53 needed to fit the maximum in the Bull spectrum, thusvery close to that already found, and the value 0.9 needed to fit the measured spatial correlation. Preliminarycomparisons between the experimental CSD and the simplified Chase model gave a value for the coefficient mt sensiblyhigher than that suggested by Chase. Thus, it was evident that the hypothesis mm, mt51 at the basis of the simplifications
ARTICLE IN PRESSE. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 331
Author's personal copy
made by Chase was, in this case, not valid. For this reason, the complete form as in Eq. (2) is used to perform theanalysis. It can be concluded that, except for mt and somewhat for mm, the values of the identified parameters are not sofar to those found by Chase analysing pressure experimental data acquired in completely different flow conditions.Finally, a+ is obtained by a direct comparison with the measured ASD (see Fig. 11) when the other coefficients are
fixed. This parameter determines the amplitude of the ASD spectrum and in particular of its maximum, the bestagreement with experimental data is found for a+ ! 0.8. On the other hand, if the interest is not in the maximum but in
ARTICLE IN PRESS
Fig. 10. Spanwise coherence: comparison with theoretical models.
Fig. 9. Streamwise coherence: comparison with theoretical models.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342332
Author's personal copy
the higher frequency scale-independent region, the value of a+ should be 1.5. However, to perform the structuralanalysis described in Section 4.3, the measured ASD was used.
3.3. Convection velocity
Some other insights into spectral characteristics of the WPFs can be provided by examining the convection velocityUc. The convection velocity can be obtained from the phase y!x;o" # $ox=Uc!x;o" of the CSD. In Figs. 12 and 13, the
ARTICLE IN PRESS
Fig. 12. Convection velocity at U # 3.31m/s.
Fig. 11. Auto-spectral density: comparison with Chase model.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 333
Author's personal copy
convection velocities divided by the free-stream velocity U, obtained for fixed spatial separations x/d, are plotted as afunction of the dimensionless frequency od/ut. Different figures refer, as usual, to the two different free-streamvelocities. Farabee and Casarella (1991) have observed a peak value of convection velocity for od/ut ! 50,independently of the x/d values. This peak corresponds exactly to the maximum observed in the spectra and to the valuethat separates the low and the high-frequency behaviour in the coherence function. This fact demonstrated that not onlythe lowest wavenumber components experienced a decay, but that they are also convected at lower overall velocity.In the present case, CSD analysis was performed without using noise cancellation technique to avoid phase alteration.
ARTICLE IN PRESS
Fig. 13. Convection velocity at U ! 5.31m/s.
Fig. 14. Broadband convection velocity.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342334
Author's personal copy
On the other hand, convection velocity obtained by a division for the CSD phase is very sensitive to small disturbancesleading to unreasonable value of the convection velocity. For this reason, frequencies below 25Hz were cancelled outfrom the graph.By inspection of Figs. 12 and 13, an increase of the convection velocity with the growing of the spatial
separation is observed; this trend of Uc is related to an increasing dominance of large-scale events to the two-pointcorrelation as the separation increases. For small separations, the correlation data and hence the convection velocity aredominated by the small-scale eddies close to the wall, which move with a lower velocity than the large-scale events.However, as far as spatial separation increases, the curves tend to collapse in a unique curve indicating that, even if theTaylor frozen flow hypothesis does not strictly hold for the smallest spatial separations, the convection velocity can berepresented as a function of the single variable od/ut. Moreover, with increasing frequency, the convection velocitiesassume a flat trend.The dependence of the convection velocity on the spatial separation can be better highlighted from the analysis of the
space-time correlation functions of the pressure signals. The convection velocity is obtained as the ratio x/t at whichthe cross-correlation Rpp(x,t) has a maximum. In Fig. 14, the convection velocities normalised with respect to thefree-stream velocity for 3.31 and 5.31m/s are depicted as a function of the nondimensional parameter x/d*. Theexperimental data are also compared with those obtained experimentally by Bull (1967) and numerically by Na andMoin (1996). The values of Uc range from 0.6 for the smaller separations associated with the small-scale structures, to0.73 at higher separations, related to the larger ones. From the above considerations, as proposed by several authors,the convection velocity can be modelled with a constant average value between small- and large-scale convectionvelocities, in this case, equal to 0.65U.
4. Structural response analysis
4.1. Identification of modal parameters
Hammer impact tests were performed to determine dry and wet natural frequencies, and then the added fluid mass,modes and modal damping factors of the plate. The first 16 dry natural frequencies omn, wet natural frequencies omn
and their correspondence with the mode shapes were evaluated in two specific frequency ranges: the dry set in125–769Hz and the wet one in the 26–283Hz. Thus, the experimental function of the added mass, me
f !o", was estimatedby the relation (Blevins, 1987):
mef !o" # rsh
omn
omn
! "2
$ 1
" #
. (3)
Since the pressure load spectra exhibited a significant energy content up to 1 kHz, the modal parameters wereevaluated in a larger frequency range, 0–3 kHz, by using a FE model of the plate. The experimental boundaryconditions were reproduced by imposing zero displacement and adding rotational springs along the plate edges; theirstiffness was tuned in order to replicate the experimentally measured natural frequencies.An approximated numerical/theoretical expression for the added mass, valid for structural waves having
wavenumbers greater than the acoustic wavenumber k # o/c, is provided by the relation (Fahy, 1985)
mnf !o" #
rks
, (4)
where ks #################k2
m % k2n
qis the primary effective wavenumber component of the vibration. Hence, the numerical wet
natural frequencies were computed by the following expression:
omn & omn 1%r
rshks
! "$1=2, (5)
where omn are the numerical dry natural frequencies computed by the aforementioned FE model. The primarywavenumber used in Eq. (5) corresponds to simply supported boundary conditions, i.e. km # mp/a and kn # np/b thislast being the only one analytically known. It is clear that this assumption is valid as far as the frequency increases. InFig. 15, the experimental and the theoretical added mass curves, me
f !o" and mnf !o", respectively, for the first 16 modes,
are displayed showing a difference of about 23% for the first mode that decreases, as expected, with increasing modeorder. Moreover, although natural modes of plates surrounded by unbounded fluids are not mathematicallyorthogonal, their shapes remain almost unchanged (Fahy, 1985). This result was partially verified by the experimental
ARTICLE IN PRESSE. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 335
Author's personal copy
analysis. In fact, a modal identification was performed using a number of points, sufficient to identify the mode orderand the position of nodes and maxima along some selected lines, but not to represent the whole mode shapes.In conclusion, to calculate the structural response with the numerical procedure described in the following section: (i)
the dry modes provided by the FE analysis are used, (ii) the first 16 wet natural frequencies were obtainedexperimentally, and (iii) the remaining ones were estimated by using the dry natural frequencies provided by the FEanalysis and Eq. (5).The structural modal damping coefficient, Z, was evaluated from wet hammer impact tests: it decreases from 0.034 for
the first modes to a quite constant value around 0.018 for the higher modes.
4.2. Remarks on the prediction of structural response
A procedure based on the finite element approach was presented and discussed in the recent literature to solve theresponse of a plate under a TBL excitation (De Rosa and Franco, 2007). Specifically, the Corcos model was used forcomparing the numerical response with the exact one, and in order to define a general methodology, able to work forany TBL model at acceptable computational costs. For the sake of clarity, some details are herein briefly recalled.The cited finite element procedure is assembled by using the following equation suitable for all the methods working
with discrete coordinates (Elishakoff, 1983); the CSD matrix of displacements of a structural operator represented byusing NG degrees of freedom and NM mode shapes is given by
SW!o" # UH!o"SU!o"H!o"$UT, (6)
with
SU!o" # UT SFF!o"U, (7)
where U is the structural modal matrix (each column is an eigenvector sampled at the NG selected points), [NG%NM]and the generic term of H(o) is Hj!o" # &o2
j ' o( iZo2j )'1, [NM%NM].
The translation of the distributed random loads to the set of NG points, in other words the way of representing theSFF, can be solved in the framework of the finite element method by using consistent approach, that is by using theshape function vector, N, belonging to each element:
SC!E"FF k;q #Z
x!k"1
Z
x!k"2
Z
x!q"1
Z
x!q"2
NTFpp0 !x!k"1 ; x
!k"2 ; x
!q"1 ; x
!q"2 ;o"Ndx!k"1 dx!q"1 dx!k"2 dx!q"2 , (8)
ARTICLE IN PRESS
Fig. 15. Added mass coefficient.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342336
Author's personal copy
where the double integers k and q indicate here two generic finite elements and the integration is related to the area ofeach of them. The vector N can be interpreted as the interpolating function basis selected by the analyst according to thespecific problem and boundary conditions (Cook, 1981). Thus, Eq. (8) serves to evaluate a generic kqth member of theNE!NE load matrix, where NE is the number of elements. A simplified approach could refer to each grid point ratherthan each finite element. This means that the load acting on the ith grid point will be the resultant of the distributed loadworking on the equivalent nodal area, say Areai, belonging to it. This area vector can be evaluated easily by using astatic deterministic unit pressure load (De Rosa et al., 1994; Hambric et al., 2004). Accordingly, one gets the generic ijthmember of the NG!NG matrix:
SC"G#FF i;j $Z xi%"Dx=2#
xi&"Dx=2#
Z xj%"Dx=2#
xj&"Dx=2#
Z yi%"Dy=2#
yi&"Dy=2#
Z yj%"Dy=2#
yj&"Dy=2#Fpp0 "xi; xj ; yi; yj ;o#dyj dyi dxj dxi. (9)
An area DxDy is assigned to both points P(xi, yi) and Q(xj, yj) and the double space integration refers to these finitedomains. A further approximation could also be introduced, considering that the wall-pressure distribution due to theTBL in the low-frequency range does not fluctuate very quickly. In this case, the last integral could be approximated asfollows:
SL"G#FF i;j $ Fpp0 "xi; xj ; yi; yj ;o#'DxDy(2. (10)
Obviously, the approximations represented by Eqs. (8)–(10) are associated with decreasing computational cost.The problem of the plate response under a convective random load, expressed in discrete form as described by
Eqs. (6) and (7), can be accurately approached only when adequately resolving both the spatial distributions of theresponse function and of the forcing function; in particular, since in this case Uc5cB, the discretisation length, is ruledby the hydrodynamic load.In this work, Eq. (9) was used to calculate the SFF matrix because Eq. (10) was not adequate for the present
simulations. In fact, in the frequency range of interest, Eq. (9) allows the avoidance of the numerical divergence of thestructural response due to the incorrect representation of the pressure load, as approximated by Eq. (10). Some furtherdetails of the numerical simulations are given in the next paragraph. The finite element approach was used to generatethe modal base, while the responses were calculated by a specific Fortran code.
4.3. Experimental analysis and comparisons
The ASDs of the acceleration signals, experimentally measured in eight different points over the plate, werecomputed and the results averaged and compared with the results obtained by the numerical procedure exposed in theprevious section. The numerical results were obtained applying Eqs. (6), (7) and (9) for both the Corcos and Chasemodels.The FE analysis was performed using 61! 21 grid points corresponding to a spatial discretisation of 1 cm in both
directions. The integral in Eq. (9) was calculated using the trapezoidal rule. The hydrodynamic parameters inserted inEq. (9) were those identified in Sections 3.1–3.3; in particular, the experimental ASD was used and the convectionvelocity was assumed constant over the whole frequency range and equal to 0.65U for both ship speeds. After havingperformed the convergence analysis, each integration domain was finally subdivided, for both velocity conditions, ineight intervals when the Corcos model was used and in 24 intervals when the Chase model was used instead. The Corcosnumerical solution of integral in Eq. (9) was compared and validated by an analogous analytical solution (De Rosa andFranco, 2007). In both cases, the number of retained natural modes was 100.The response of the plate was computed for a frequency range between 1 and 1000Hz (the step was 4.5Hz) for the
higher velocity and only between 1 and 600Hz for the lower one, because above this frequency a refined mesh must beused to obtain convergence. In these frequency ranges, the ratio between the bending wavenumber kB $
!!!!!!!!!!!!!rsh=D4
p !!!!op
and the convective wavenumber kc (see Fig. 16) varied between 0.045 and 0.21 for the lowest velocity and between 0.057and 0.35 for the highest velocity.Figs. 17 and 18 present the experimental and numerical averaged ASDs of the plate’s acceleration for 3.3 and 5.3m/s,
respectively.Unsurprisingly, an overestimation of the plate response is evident in the whole frequency range if the Corcos model is
used; on the other hand, the numerical response obtained using the Chase model is undoubtedly in better agreementwith experimental data. However, below 25–30Hz both pressure spectra (although cleaned) and structural response arecontaminated by the carriage vibrations transmitted to the model; thus, any comparison is meaningless. Above thesefrequencies, the agreement is really satisfactory until 420Hz for the lower velocity case and until 650Hz for the higherone. In the high-frequency part, the Chase model tends to slightly underestimate the experimental curve; this fact, more
ARTICLE IN PRESSE. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 337
Author's personal copy
visible for 3.3m/s, can be partly due to the poor spatial resolution of pressure transducers that attenuate the high-frequency part of the ASD spectrum.Finally, an evident mismatch between the experimental and the numerical curve, generated by the presence of high
peaks in the experimental data, can be observed in Fig. 18 around 800Hz probably due to local flow disturbances. Tobetter quantify the difference between model and experimental results, the previous curves are plotted in Figs. 19 and 20in third-octave bands. It can be seen that the root mean square of the difference between the response obtained applyingthe Chase model and the experimental data is 5.2 dB for the lower velocity and 4.1 for the higher one. The responseobtained by using the Corcos model to represent the surface pressure field, overpredicts in both cases the experimental
ARTICLE IN PRESS
Fig. 16. Bending and convective wavenumber ratio.
Fig. 17. Acceleration response spectra at U ! 3.3m/s.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342338
Author's personal copy
data resulting in an average difference of 18 dB. The small gap between the numerical predictions obtained by applyingthe Chase model and the experimental plate response that is less or, at least, of the same order of that found byFinnveden et al. (2005) demonstrated the validity of the developed procedure and the capability of the Chase model torepresent the surface pressure field on a ship hull. However, a more careful determination of the added water mass inthe whole frequency range can improve the numerical estimation, as well as a deep uncertainty analysis can betterindicate the confidence interval of the present results.
ARTICLE IN PRESS
Fig. 18. Acceleration response spectra at U ! 5.3m/s.
Fig. 19. Acceleration response spectra at U ! 3.3m/s, third-octave bands.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 339
Author's personal copy
5. Concluding remarks
In this paper, a complete analysis of the coupled structural-fluid problem concerning the response of an elastic plateinserted in the bottom of a catamaran hull excited by the TBL WPFs, has been carried out.The hydrodynamic analysis, performed on a rigid plate at high Reynolds number and in equilibrium flow conditions
allowed the determination of the appropriate scaling laws for the ASDs in the different frequency ranges. Moreover, theanalysis of the cross-spectral densities in longitudinal and lateral flow directions was used to fit the theoretical models,available for the pressure representation, to the experimental data. Two theoretical models are analysed: the Corcos andChase models. It was demonstrated that it is possible to find for both a complete set of free parameters that provide afair agreement with experimental CSD data.Since spatial resolution was too poor to analyse the CSD behaviour at high frequency and since with this type of
experimental analysis it was not possible to isolate the longest wavelengths, the studied pressure behaviour mainlyconcerned the characteristics of the convective domain. Thus, an indirect comparison based on the vibrational responseof a plate was performed; in particular, the numerical structural responses obtained using the two models werecompared with experimental measurements. The conclusion of this analysis is that, although the Chase model iscomplex and dependent on several empirical parameters, it provides a very good agreement with experimental data atlow wavenumbers. The performed analysis can give interesting information also for the full-scale problem; in fact,considering realistic values of the hydrodynamic and of the structural parameters, coincidence conditions usuallyappear at very low frequency both for underwater and surface marine vehicles.The main disadvantage in using Chase model lies in its non-predictive character. In fact, it was shown that the
original Chase parameters do not fit the experimental data; thus a new set of parameters have been determined and thecomplete version of the model has been used.It is clear that the aim of any numerical procedure is to produce robust predictive tools to be used at the design stage.
Ongoing comparisons between pressure measurements performed on different ship models and for various flowconditions in terms of Reynolds number values are aimed to analyse the range of variability of the parameters and theirdependence on the particular flow conditions.
Acknowledgement
The research was supported by the Ministero dei Trasporti in the frame of ‘‘Programma Ricerche Luglio2006-Dicembre 2007’’.
ARTICLE IN PRESS
Fig. 20. Acceleration response spectra at U ! 5.3m/s, third-octave bands.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342340
Author's personal copy
References
Abraham, B.M., 1998. Direct measurements of the turbulent boundary layer wall pressure wavenumber-frequency spectra. ASMEJournal of Fluids Engineering 120, 29–39.
Bendat, J.S., Piersol, A.G., 1991. Random Data: Analysis and Measurements Procedure. Wiley, New York.Blake, W.K., 1970. Turbulent boundary-layer wall-pressure fluctuations on smooth and rough walls. Journal of Fluid Mechanics 44,
637–660.Blake, W.K., 1986. Mechanics of Flow Induced Sound and Vibration. Academic Press, Orlando.Blevins, R.D., 1987. Formulas for Natural Frequency and Mode Shape. Robert E. Krieger Publishing Company, Melbourne, FL.Bull, K.M., 1967. Wall pressure fluctuations associated with subsonic turbulent boundary layer flow. Journal of Fluid Mechanics 28,
719–754.Bull, M.K., 1996. Wall pressure fluctuations beneath turbulent boundary layers: some reflections on forty years of research. Journal of
Sound and Vibration 190, 299–315.Bull, M.K., Thomas, S.W., 1976. High frequency wall pressure fluctuations in turbulent boundary layers. Physics of Fluids 19,
597–599.Chang, P.A., Piomelli, U., Blake, W.K., 1999. Relationship between wall pressure and velocity-field sources. Physics of Fluids A 11,
3434–3448.Chase, D.M., 1980. Modelling the wavevector-frequency spectrum of turbulent boundary layer wall pressure. Journal of Sound and
Vibration 70 (1), 29–67.Choi, H., Moin, P., 1990. On the space-time characteristics of wall pressure fluctuations. Physics of Fluids A 2, 1450–1460.Ciappi, E., Magionesi, F., 2005. Characteristics of the turbulent boundary layer pressure spectra for high speed vessels. Journal of
Fluids and Structures 21, 321–333.Cook, R.D., 1981. Concept and Application of Finite Element Analysis. Wiley, New York.Corcos, G.M., 1963. Resolution of pressure in turbulence. Journal of the Acoustical Society of America 35, 192–199.De Rosa, S., Franco, F., 2007. Exact and numerical responses of a plate under a turbulent boundary layer excitation. Journal of Fluids
and Structures 24, 212–230.De Rosa, S., Pezzullo, G., Lecce, L., Marulo, F., 1994. Structural acoustic calculations in the low frequency range. AIAA Journal of
Aircraft 31 (6), 1387–1394.Efimtsov, B.M., 1982. Characteristics of the field of turbulent wall pressure fluctuations at large Reynolds numbers. Soviet Physics-
Acoustics 28 (4), 289–292.Elishakoff, I., 1983. Probabilistic Methods in the Theory of Structures. Wiley, New York.Fahy, F., 1985. Sound and Structural Vibration. Academic Press, Orlando.Farabee, T.M., Casarella, M.J., 1991. Spectral features of wall pressure fluctuations beneath turbulent boundary layers. Physics of
Fluids A 3, 2410–2420.Farabee, T.M., Geib, F.E., 1991. Measurements of boundary layer pressure fluctuations at low wavenumbers on smooth and rough
walls. In: ASME Symposium on Flow Noise Modelling, Measurements and Control, NCA-vol. 11, FED-vol. 130, pp. 55–68.Ffowcs Williams, J.E., 1982. Boundary layer pressures and the Corcos model: a development to incorporate low wavenumber
constraints. Journal of Fluid Mechanics 125, 9–25.Finnveden, S., Birgersson, F., Ross, U., Kremer, T., 2005. A model of wall pressure correlation for prediction of turbulence-induced
vibration. Journal of Fluids and Structures 20, 1127–1143.Goody, M., 1999. An experimental investigation of pressure fluctuations in three-dimensional turbulent boundary layers. Ph.D. Thesis,
Department of Aerospace and Ocean Engineering, Virginia Tech, USA.Graham, W.R., 1997. A comparison of models for the wavenumber-frequency spectrum of turbulent boundary layer pressures. Journal
of Sound and Vibration 206 (4), 541–565.Hambric, S.A., Hwang, Y.F., Bonness, W.K., 2004. Vibrations of plates with clamped and free edges excited by low-speed turbulent
boundary layer flow. Journal of Fluids and Structures 19, 93–110.Han, F., Bernhard, R.J., Mongeau, L.G., 1999. Prediction of flow-induced structural vibration and sound radiation using energy flow
analysis. Journal of Sound and Vibration 227 (4), 685–709.Hwang, Y.F., Maidanik, G., 1990. A wavenumber analysis of the coupling of a structural mode and flow turbulence. Journal of Sound
and Vibration 142, 135–152.Keith, W.L., Hurdis, D.A., Abraham, B.M., 1992. A comparison of turbulent boundary layer wall-pressure spectra. ASME Journal of
Fluids Engineering 114, 338–347.Josserand, M.A., Lauchle, G.C., 1989. ERRATA: D.M. Chase JSV 1980. Journal of Sound and Vibration 128, 519–523.Lee, Y.T., Blake, W.K., Farabee, T.M., 2005a. Modeling of wall pressure fluctuations based on time mean flow field. ASME Journal of
Fluids Engineering 127, 233–240.Lee, Y.T., Miller, R., Gorski, J., Farabee, T., 2005b. Predictions of hull pressure fluctuations for a ship model. In: Proceedings of
International Conference on Marine Research and Transportation (ICMRT05), Ischia, Italy.Manoha, E., 1996. The wavenumber-frequency spectrum of the wall pressure fluctuations beneath a turbulent boundary layer. In:
Proceedings of the AIAA Aeroacoustics Conference, AIAA paper 96-1758.Na, Y., Moin, P., 1996. Direct numerical simulation of turbulent boundary layers with adverse pressure gradients and separation.
Report No. TF-68. Thermosciences Division, Department of Mechanical Engineering, Stanford University.
ARTICLE IN PRESSE. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 341
Author's personal copy
Panton, R.L., Robert, G., 1994. The wavenumber-phase velocity representation for the turbulent wall-pressure spectrum. ASMEJournal of Fluids Engineering 116, 477–483.
Smol’yakov, A.V., Tkachenko, V.M., 1991. Model of pseudosonic turbulent wall pressures and experimental data. Soviet Physics-Acoustics 37 (6), 627–631.
Willmarth, W.W., Wooldridge, C.E., 1962. Measurements of the fluctuating pressure at the wall beneath a thick turbulent boundarylayer. Journal of Fluid Mechanics 14, 187–210.
ARTICLE IN PRESSE. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342342
1) Inquadramento Generale (Interazione Fluido-Struttura).
2) Onde, Guide d’onda e Modi Propri di un Sistema Lineare.
3) Sistema Tubo e Pistone. 4) Introduzione all’Aeroelasticità. 5) Instabilità Supersonica di un Pannello. 6) Aeroelasticità Dinamica di un Profilo. 7) Aeroelasticità Statica di Modellli Alari 2D e 3D. 8) Cenno alle Forze Aerodinamiche Instazionarie 9) Il Problema del Flutter (e la Risposta Dinamica). 10) Buffett, Gallopping, Vortex shedding, Stall flutter. 11) Metodi (Statistici) Energetici per Sistemi Lineari. 12) Approccio modale per interpretazioni
energetiche (EDA). 13) Similitudini 14) Introduzione al FEM spettrale. 15) Cenni di Acustica (e AcustoElasticità) Interna dei
Velivoli 16) Potenza Acustica Radiata da Componenti
Strutturali Piani. 17) Un Modello Aero(Idro)Acusto-Elastico Completo 18) Rappresentazioni Universali dei Dati Aero-
Acusto-Elastici.
Analysis of the scaling laws for the turbulence drivenpanel responses
E. Ciappi a,n, F. Magionesi a, S. De Rosa b, F. Franco b
a CNR-INSEAN, Via di Vallerano 139, 00128 Roma, Italyb Department of Aerospace Engineering, University of Naples ’’Federico II’’, Napoli, Italy
a r t i c l e i n f o
Article history:Received 3 November 2010Received in revised form27 October 2011Accepted 2 November 2011Available online 5 December 2011
Keywords:Wall pressure fluctuationsPlate responseDimensional analysisScaling laws
a b s t r a c t
The high computational costs, associated to the numerical solution of the fluctuatingpressure field generated at the wall by the turbulent boundary layer and of the inducedstructural response, push for the exploration of alternative methodologies of analysis.Wall pressure fluctuations spectra are often modeled using semi-empirical expressionsbased on the experimental evidence and on the identification of universal scaling laws.In this work the possibility to adopt a dimensionless representation, able to provide auniversal expression for the structural response of plates under turbulent boundarylayer excitations, is investigated with the help of pressure fluctuations and accelerationexperimental data sets. The test article is a plane thin plate wetted by a fluid over oneface, the boundary layer is fully developed and pressure gradient effects are negligible.The attention is devoted to the investigation and the definition of a normalization of therequired axes: the excitation frequency and the power spectral density of the structuralresponse. The analysis is initially based on analytical models for the structural responseunder turbulent boundary layer excitations. The proposed scaling laws are successivelyand successfully applied to four data sets measured in different conditions both in windtunnels and in a towing tank.
& 2011 Elsevier Ltd. All rights reserved.
1. Introduction
Turbulent boundary layer (TBL), inducing vibrations of elastic structures, is one of the major noise sources in naval,aerospace, and automotive engineering.
It is well known that the numerical solution of this fluid structure interaction problem can be so computationallydemanding as to be impractical for real application. In fact, direct numerical simulations (DNS) of the Navier–Stokesequations are generally limited to problems in which the local Reynolds number, based on the momentum thickness, is inthe order of 300 (Choi and Moin, 1990). A significant reduction of the computational time can be certainly obtained usingRANS (Reynolds Average Navier Stokes) simulations (Lee et al., 2005; Peltier and Hambric, 2007). In particular Peltier andHambric proposed an original stochastic model for the representation of the space-time wall pressure spectrum that usedstatistical data obtained from RANS calculations. The values of ReW are in this case between 1400 and 8000.
To overcome the limitations of actual CFD capabilities, the attention of the research community is mainly directed tothe analytical characterization of the pressure field by the definition of scaling laws for the power spectral density (PSD)(Bull, 1996; Ciappi et al., 2009; Goody, 2004; Keith et al., 1992) and of predictive models (Corcos, 1964; Chase, 1980;
Contents lists available at SciVerse ScienceDirect
journal homepage: www.elsevier.com/locate/jfs
Journal of Fluids and Structures
0889-9746/$ - see front matter & 2011 Elsevier Ltd. All rights reserved.doi:10.1016/j.jfluidstructs.2011.11.003
n Corresponding author. Tel.: !39 065 0299 268; fax: !39 065 070 619.E-mail address: [email protected] (E. Ciappi).
Journal of Fluids and Structures 32 (2012) 90–103
Author's personal copy
Journal of Fluids and Structures 25 (2009) 321–342
Hydrodynamic and hydroelastic analyses of a plate excitedby the turbulent boundary layer
E. Ciappia, F. Magionesia, S. De Rosab,!, F. Francob
aINSEAN-Istituto Nazionale per Studi ed Esperienze di Architettura Navale, Via di Vallerano 139, 00128 Roma, Italybælab-Acoustics and Vibration Laboratory, Dipartimento di Ingegneria Aerospaziale, Universita degli Studi di Napoli ‘‘Federico II’’,
Via Claudio 21, 80125 Napoli, Italy
Received 4 October 2007; accepted 11 April 2008Available online 11 October 2008
Abstract
Recent studies have demonstrated that the characterisation of wall-pressure fluctuations for surface ships is of greatinterest not only for military applications but also for civil marine vehicles. A ship model towed in a towing tank is usedto perform pressure and structural measurements at high Reynolds numbers. This facility provides ideal flow conditionsbecause background turbulence and noise are almost absent. Free surface effects are naturally included in the analysis,although in the particular section chosen for the present study do not have significant consequences on pressure spectra.Scaling laws for the power spectral density are identified providing the possibility to estimate pressure spectra fordifferent flow conditions and in particular for full-scale applications. The range of validity of some theoretical modelsfor the cross-spectral density representation is analysed by direct comparison with experimental data of wall-pressurefluctuations measured in streamwise and spanwise direction. In a second phase, an indirect validation is performed bycomparing the measured vibrational response of an elastic plate inserted in the catamaran hull with that obtainednumerically using, as a forcing function, the modelled pressure load. In general, marine structures are able to acceptenergy mainly from the sub-convective components of the pressure field because the typical bending wavenumber valuesare usually lower than the convective one; thus, a model that gives an accurate description of the phenomenon at lowwavenumbers is needed. In this work, it is shown that the use of the Chase model for the description of the pressure fieldprovides a satisfactory agreement between the numerical and the experimental response of the hull plate. Theseexperimental data, although acquired at model scale, represent a significant test case also for the real ship problem.r 2008 Elsevier Ltd. All rights reserved.
Keywords: Wall-pressure fluctuations; High Reynolds number flow; High-speed vessels; Theoretical models; Vibrational response
1. Introduction
Vibrations of elastic structures excited by the turbulent boundary layer (TBL) are of interest for interior and exteriornoise emission problems in aeronautical, automotive and marine applications. In particular, new requirements in termsof comfort on board high-speed ships for passenger transportation have addressed the attention of the scientificcommunity to the identification and to the characterisation of noise sources including those of hydrodynamic nature.Recent studies performed in the framework of the European RTD project NORMA (Noise Reduction for Marine
ARTICLE IN PRESS
www.elsevier.com/locate/jfs
0889-9746/$ - see front matter r 2008 Elsevier Ltd. All rights reserved.doi:10.1016/j.jfluidstructs.2008.04.006
!Corresponding author: Tel.: +39081 7683581; fax: +39 081 624609.E-mail address: [email protected] (S. De Rosa).
Author's personal copy
Applications G3RD-2001-0393) demonstrated that, at least for new concept design fast ships, flow noise sources, e.g.,the TBL, play an important role above 30 knots.The typical way to characterise wall-pressure fluctuations (WPF) is via experimental tests performed in suitable
facilities like wind or water tunnels. In fact, direct numerical simulations (DNS) or large eddy simulations (LES) areoften not applicable in the case of complex geometries and realistic flow conditions (high Reynolds numbers) due to thelimitation of computational resources. DNS of WPF were performed by Choi and Moin (1990), analysing the channelflow problem for ReW ! UW/n ! 287. Furthermore, Chang et al. (1999) analysed the influence of the different TBLvelocity components on the wavenumber pressure spectra in a channel flow for a Reynolds number, based on thechannel half width, equal to 3200. Recently, Lee et al. (2005a) proposed a new methodology to calculate numericallywall-pressure spectra. The method uses the predicted mean flow field obtained from RANS calculations and a spectral
ARTICLE IN PRESS
Nomenclature
a streamwise plate lengthAreai equivalent area in finite element approachb spanwise plate lengthc speed of sound in watercB bending wave speedD flexural stiffness of the plated sensor dimensiond0 nondimensional length: d0 ! d/d*
d+ nondimensional length: d+ ! dut/nFr Froude numberg acceleration of gravityH structural transfer function diagonal matrixH shape factor: H ! d*/Wh thickness of the platei imaginary unitj index for the jth modal componentk acoustic wavenumberkc convective wavenumberkB bending wavenumberLpp length between perpendicularsm, n modal indicesme experimental added mass functionmn numerical added mass functionN shape function vector in finite element
approachNG number of grid of the finite element meshNM number of mode shapesReW Reynolds number, ReW ! UW/nRet Reynolds number, Ret ! dut/nRpp cross-correlation functionSaa plate acceleration response (auto-spectral
density)SW matrix of the cross-spectral densities of the
plate displacementSF matrix of the cross-spectral densities of the
generalised loadSFF matrix of the cross-spectral densities of the
equivalent loadu+ wall unit, u+ ! U/utut friction velocityU free-stream velocity
Uc convection velocityx streamwise reference axisy spanwise reference axisy+ wall unit, y+ ! yut/n
Greek symbols
g1 streamwise decay factorg3 spanwise decay factorG coherence functiond boundary layer thicknessd* displacement thicknessDx extension of each finite element in streamwise
directionDy extension of each finite element in spanwise
directionZ spanwise spatial separationZp plate modal damping coefficientW momentum thicknessy phase functionn kinematic viscosityx streamwise spatial separationrs plate material densityr fluid densityt time delaytw wall shear stressFpp auto-spectral density of the wall-pressure
distribution due to the turbulent boundarylayer
Fpp0 cross-spectral density of the wall-pressuredistribution due to the turbulent boundarylayer
U eigenvector matrixo circular radian frequencyoj natural circular frequency of the jth modeomn dry natural circular frequencies of the plateomn wet natural circular frequencies of the plate
Matrix and complex operators
* complex conjugate operatorT transposition operator
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342322
Author's personal copy
correlation model, and integrates across the TBL. The method was validated both for an equilibrium flow atReW ! 3582 and for a non-equilibrium flow resulting from flow over a backward-facing step. Using the samemethodology, Lee et al. (2005b) characterised wall-pressure spectra for a surface ship model including the effects of hullcurvature and of the free surface. The comparison of the scaled spectra, obtained while varying the axial location, andthe distance from the free surface with spectra, obtained for an equilibrium flow, showed that, in several locations, theformer deviate from the canonical case.On the other hand, there are many experimental works related to WPF, most of them devoted to the identification of
the appropriate scaling laws for the auto-spectral density (ASD) for zero pressure gradient flow. The pressure ASDfrequency range is subdivided according to the boundary layer regions that give contributions to wall-pressure spectrawhere different scaling variables hold. In particular, Farabee and Casarella (1991) identified four frequency ranges intheir data: the low-frequency and the mid-frequency range where outer variables hold, the high-frequency range whereinner variables hold, and an overlap scale-independent region proportional to o"1, whose extent depends on theReynolds number. With respect to this point, Keith et al. (1992) presented the most extensive comparison among manyavailable experimental data obtained in fully developed and developing channel flow, in fully developed pipe flow and inwind tunnel, over a wide range of Reynolds numbers, with the aim of identifying the best choice for the scalingparameters in the different frequency regions. Goody (1999) performed an experimental campaign in a two-dimensionalboundary layer for ReW values ranging from 7800 to 23 400, investigating different combinations of scaling parameters.Finally, a detailed review of the state-of-the-art on this subject can be found in Bull (1996).The spatial characterisation of WPFs was first analysed by Corcos (1963) on the basis of measurements performed by
Willmarth and Wooldridge (1962). Assuming the validity of separation of variables in the streamwise and spanwisedirections, Corcos stated an exponential decay for the cross-spectral density (CSD) as a function of the similarityvariables ox/Uc and oZ/Uc, where Uc is the convection velocity, and x and Z are the streamwise and spanwise spatialseparation, respectively. Several authors have performed comparisons between measured CSD data and Corcos model(Blake, 1986; Bull, 1967); in particular, Farabee and Casarella (1991) from the analysis of their experimental dataprovided, at least in a certain nondimensional frequency range, a confirmation of this pressure behaviour for a wideseries of spatial separations in streamwise direction and for different flow velocities or local Reynolds number values.The success of the Corcos model lies in its simplicity and in its predictive character since the model parameters aresubstantially case-independent. Nevertheless, it is generally stated that Corcos model gives a correct representation ofthe WPF behaviour in the convective domain, i.e. when the wavenumbers are close to the convective wavenumberkc ! o/Uc. On the contrary, in the sub-convective domain the white Corcos spectrum largely overpredicts the realamplitude. Since for several applications and in particular in the case of underwater and surface marine vehicles, theconvective wavenumber is greater than the bending wavenumber kB ! o/cB, it is of primary importance to evaluatecorrectly the sub-convective domain of pressure spectra that corresponds to the high-sensitivity region for the structure.Several new models, some directly derived by the Corcos one (Efimtsov, 1982; Ffowcs Williams, 1982), others
overcoming the Corcos multiplicative approach such as those by Chase (1980) and Smol’yakov and Tkachenko (1991),were developed to improve the estimation of pressure spectra in this region. A comparison between the predictions ofthe radiated acoustic power by rectangular plates was carried out numerically by Graham (1997); it was performed fordifferent test conditions and applying the above models. It was there concluded that the use of sophisticated modelssuch as the Chase one is needed only for structures that do not exhibit coincidence, but that for aircraft the best model isthe one which provides an accurate description of the convective peak, thus suggesting the use of the Efimtsov model.Nonetheless, no experimental evidence supporting these conclusions was reported in Graham’s work. However, thespatial domain comparison between pressure experimental spectra and theoretical models cannot definitively indicatethe best in describing the different wavenumber regions. It is usually possible to find a set of parameters for each modelable to provide a good data fit. It is clear that most of the energy of WPF is concentrated around the convective peakand then any correlation data is mainly the representation of the convective character of the TBL. Unfortunately, onlyfew experimental data concerning direct measurements of the wavenumber-frequency spectrum are available(Abraham, 1998; Choi and Moin, 1990; Panton and Robert, 1994; Farabee and Geib, 1991; Manoha, 1996) and,among them, a big spread of the spectra magnitude at low wavenumbers is present as reported for example by Hwangand Maidanik (1990).In order to overcome the limitations of flow measurements, an indirect approach to estimate the validity of different
models for WPF representation, based on the analysis of the response of simple elastic structures to the TBL load, isproposed here. The same idea was recently applied by Finnveden et al. (2005), who compared the measured response ofa flat plate with those obtained numerically using modelled pressure loads. This work presented the first and, to theauthors’ best knowledge, the only correlation between aerodynamic and structural data measured in the same facilityand with the same set-up. They suggested a modified version of the Corcos model by introducing a frequency and flowspeed dependence on the parameters and of the Chase model by introducing two new parameters to better fit the
ARTICLE IN PRESSE. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 323
Author's personal copy
spanwise coherence to measurements. Despite the modifications made, the conclusion was that, above the aerodynamiccoincidence (kc ! kB), only the Chase model, that does not make use of the multiplicative approach, provides a fairagreement with experimental data. In this work, the lower kB/kc ratio was 0.4 and the average difference between themodified Chase model predictions and the experimental data was 5 dB. Furthermore, Hambric et al. (2004), althoughretaining the multiplicative approach, proposed a modification of Corcos streamwise coherence to better represent thelow wavenumber domain. The model was compared with the experimental response of an elastic plate measured by Hanet al. (1999). The ratio between the structural wavenumber in flow direction and the convective wavenumber wasbetween 0.3 and 0.8 and the agreement with the experimental data was quite good. On the other hand, Han et al. (1999)chose Smol’yakov and Tkachenko to model the surface pressure field. The comparison with measurements wasperformed using the energy flow analysis method to predict the numerical plate response thus, direct information aboutthe validity of the pressure model are difficult to extract from their data.The aim of this work is to develop a general procedure based on the identification of the scaling laws and on the use of
predictive models for the surface pressure field suitable for application to full-scale problems. In particular, the capabilities ofCorcos and Chase models to predict the response of an elastic plate inserted in the hull of a ship model were investigated onthe basis of hydrodynamic and vibration data acquired, at high Reynolds numbers, in a towing tank. In a first step, pressuredata were analysed to provide their spectral characteristics. This analysis is fundamental to identify the scaling laws for theASD and the free parameters contained in the CSD wall-pressure fluctuation models. The high Reynolds number achievedwith this set-up provides an interesting extension to the previous analyses. In a second phase, a comparison between thenumerical response of the plate obtained using the two models and the experimental response is provided. Since in thepresent problem the convection velocity is very low, the ratio between the bending and the convective wavenumber issensibly lower than those previously analysed in the technical literature. This fact is fundamental for real size marineapplications for which hydrodynamic coincidence appears, even for high-speed vehicles, at very low frequency.This first section is aimed to frame the work in the proper existing literature. Section 2 presents the experimental set-
up and all the data concerning the acquisition instrumentation. The treatment of the pressure data is the specificargument of Section 3. Section 4 is fully devoted to the analysis of the structural response and the final comparisonbetween predictive and measured data. Section 5 presents the concluding remarks with some foreseen activities. For thesake of completeness, a graphic workflow has been also added in Chart 1.
2. Experimental set-up
2.1. Pressure measurements
The experiments were performed on a 1:15 scale model of the fast catamaran Jumbo CAT (Fig. 1). The scale of themodel was chosen according to Froude similarity: Fr ! U=
!!!!!!!!!!gLpp
pwhere Lpp is the length between perpendiculars, i.e.
ARTICLE IN PRESS
Chart 1. Logical workflow.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342324
Author's personal copy
the length of the vessel along the waterline between the forward and aft perpendiculars, as depicted in Fig. 1. Themaximum model width is 1.467m, Lpp is 4.635m and its draft in calm water conditions is 0.2m.The experiments were carried out in the INSEAN towing tank no. 2 which is 220m long, 9m wide and 3.5m deep
and is equipped with a carriage that can reach a maximum speed of 8m/s. The use of this kind of facility creates idealflow conditions because background turbulence and noise are avoided. The measuring section was chosen in the sternpart of the ship bottom where the hull surface is almost flat. To perform pressure measurements a 2 cm thick rigidplexiglas plate was inserted in the hull bottom where pressure transducers were positioned.The basic set-up is presented in Fig. 2 and consisted in an array of nine transducers in streamwise direction and five
transducers in the spanwise direction flush-mounted with the plate at constant distance of 1 cm between each other.Additional tests were performed with 13 transducers mounted in streamwise direction within a maximum distance of40 cm. Thus, the first pressure sensor was located at x/Lpp ! 0.88 while the last at x/Lpp ! 0.97. The minimum distancebetween transducers was constrained by the transducers’ maximum external size while the maximum distance waschosen according to the fact that for x/d*420 the longitudinal correlation is almost zero as demonstrated by previousmeasurements (Bull, 1967; Blake, 1986). Pressure signals were acquired in calm water conditions with fixed trim andsink and for two different ship model velocities: 3.31m/s (25 knots) and 5.3m/s (40 knots) corresponding to Fr ! 0.49and 0.78, respectively. The measurement error in the carriage velocity was within 1% of the nominal mean velocity.Differential piezoresistive pressure transducers Endevco 8510-B, characterised by a maximum range of 2 psig and by
a certified flat response until 14 kHz were used to measure pressure fluctuations. The transducers were staticallycalibrated in water using known water level heights. All the transducers showed a linear trend; however, the deviationaround the regression line of the data points used for the sensitivity estimate was evaluated. The standard error ofestimate was very low for all the transducers, of the order of 1%. Moreover, the total error due to thermal sensitivity,nonlinearity and pressure hysteresis, as reported in the data sheet, is around 1%. The rectangular sensing element hasan area of 1" 0.3mm2, hence the effect of the finite size of the transducers surface can be expressed in term of thenondimensional parameters d0 ! d/d* and d+ ! dut/n, where d is the bigger sensor dimension.Pressure signals were acquired and amplified by the 16 channels acquisition system PROSIG; the sampling frequency
was 12.5 kHz, the acquisition length was 15 s. Several repetitions of the test (typically 12–15) under nominally the sameconditions were performed. The data record began a few seconds after the achievement of steady conditions. The
ARTICLE IN PRESS
Fig. 1. Catamaran model and sketch of the reference length, Lpp.
Fig. 2. Set-up for pressure measurements (left) and top view of the installation of the plexiglas plate (right).
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 325
Author's personal copy
reaching of a stationary random process was verified by comparing the ensemble average value, autocorrelation andcross-correlation of the WPFs of different runs.Concerning the flow velocity field, the TBL mean parameters (as used in the data analysis and shown in Table 1) were
obtained by available RANS simulations performed in the past over the whole model. This solution was, in this case,preferred because the experimental evaluation of the boundary layer velocity profiles in a towing tank, althoughpossible, is a time-consuming process. In fact, it is clear that the acquisition time is limited for each carriage run,especially for the higher velocities, and that the time needed for the re-establishment of calm water conditions betweentwo consecutive runs is at least 10min. A detailed description of the numerical code is provided in Ciappi andMagionesi (2005) and in the references cited there. The numerical errors can be predictable in an uncertainty of about4% in the estimation of the TBL parameters from the velocity profiles.
2.2. Vibration measurements
Vibration measurements were performed replacing the rigid plate with a flexible one. The panel, made of plexiglas, is0.58m long, 0.2m wide and 0.003m thick, it was fixed to the hull model with some mastic in order to provideimpermeable conditions and to reduce the transmission of model vibrations.A preliminary series of numerical analyses have been performed to exclude the presence of significant plate
deformations due to static and dynamic pressure loads. In fact, for all the flow speeds under consideration, themaximum displacement was predicted to be 1% of the longitudinal plate dimension.The acceleration responses were acquired in eight different points (one for each carriage run) randomly chosen on the
plate surface. A Bruel & Kjaer piezoelectric accelerometer type 4393 characterised by a sensitivity of 4.19mV/g and aweight of 2.2 g was used for the acquisition. Its mass was negligible with respect to the plate mass in the frequency rangeof interest. The accelerometer signal was amplified by a Bruel & Kjaer amplifier type 2635 and acquired with a samplingfrequency of 12.5 kHz by a National Instruments PXI 6052E acquisition system. Preliminary dry and wet calm watertests were performed with the same set-up and instrumentation to evaluate the plate’s natural frequencies, hence theadded fluid mass and the modal damping factors. Two additional accelerometers were mounted on the ship’s hull andon the connecting system to acquire the spurious vibrations transmitted by the carriage structure.
3. Pressure analysis
In the following sections, the results of the experimental programme devoted to the characterisation of wall-pressurespectra are presented. The purpose of this analysis was to verify the pressure scaling laws and to provide a generalmodel for its spatial behaviour. To this aim, ASDs, streamwise and spanwise coherences and convection velocities wereextracted from measurements. Although free surface effects were naturally present, pressure gradient values calculatedon the basis of numerical simulations can be considered negligible in the measuring section. In Fig. 3, the velocityprofiles obtained numerically, used to extract the mean TBL parameter values of Table 1, are shown in wall units y+,u+. From preliminary analysis it was decided to consider only the Corcos and Chase models as antagonists in thisanalysis. In fact, the Efimtsov model has the same trend as Corcos’ in the low wavenumber domain but, this last is to bepreferred because describes the wall pressure by a simpler expression containing less empirical parameters. The FfowcsWilliams model was built to extend Corcos model to the acoustic domain, which is beyond the purpose of this analysis;finally, the Smol’yakov and Tkachenko model does not fit well the present hydrodynamic data.
3.1. Power spectral density: scaling laws
The analysis of the scaling laws for the ASD is essential to understand the contribution of the different boundarylayer regions to WPFs. Moreover, due to the particular section chosen to perform pressure measurements and the
ARTICLE IN PRESS
Table 1Mean flow velocity parameters: numerical estimation
U (knots) U (m/s) d (m) d* (m) H ut (m/s) ReW ! UW/n Ret ! dut/n d0 ! d/d* d+ ! dut/n
25 3.31 0.12 0.0142 1.27 0.11 29 535 10 153 0.07 8440 5.31 0.113 0.0137 1.3 0.1626 42 807 14 133 0.073 125
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342326
Author's personal copy
relatively high speed of this vessel, local Reynolds numbers were sensibly high (ReW ! 29 535 for 3.31m/s andReW ! 42 807 for 5.31m/s), providing an interesting extension of the validity of the scaling laws for high Reynoldsnumber. Following the frequency range division proposed by Farabee and Casarella (1991), three different spectralregions can be identified: at very low frequency, the spectra collapse using the classical outer flow variables d* and U,showing a o2 behaviour, advising that sources are associated with the large-scale structures. In the low-mid-frequencyrange, the pressure auto spectral densities collapse into a single curve when scaled with the friction velocity ut, the wallshear stress tw and d, implying that the mid-frequency structures are related with turbulence activity in the outer regionof the boundary layer. In this interval, pressure spectra exhibit their maxima for od/ut ! 50. Finally, at high-frequencyinner variable scale, which employs ut, tw and n, allows the collapse of the data independently of the Reynolds number,suggesting that sources are associated with the buffer region of the wall layer. Moreover, between mid- and high-frequency an overlap region, characterised by an o"1 decay, exists where both outer and inner variable scales hold. Thisregion is related to the turbulence activity in the logarithmic part of the boundary layer and its extension depends on theReynolds number value. Recently, Ciappi and Magionesi (2005), considering the frequency division stated by Farabeeand Casarella provided another confirmation of the proposed scaling laws. ASDs were determined using 700 spectralaverages for each signal and a Hamming window function is used to reduce bandwidth leakage. According to classicaltheory of random data (Bendat and Piersol, 1991), the statistical convergence error was defined as !r ! 1=
!!!!!ndp
, where nd
is the number of spectral averages. In the present analysis, the data random error was equal to 73.8%; thus, theuncertainty in the calculated pressure spectra, obtained by considering the above and all the previously definedexperimental sources of error (see Section 2), was within the range of 71 dB.In Fig. 4, a typical ASD signal is displayed showing high peaks in the frequency region between 8 and 20Hz due to
structural vibrations of the carriage and of the connecting system. The peaks were eliminated, for the ASD analysis,using suitable relations based on the coherence function (Bendat and Piersol, 1991) between two pressure sensorslocated sufficiently far from each other to be correlated only by structural vibrations. The result of this cleaningprocedure is shown in the same figure. Fig. 5 shows the cleaned ASD for the two different test velocities, scaled usingouter flow variables: od=ut; Fpp#o$u2t=t
2wd; they are shown and compared with the results of Farabee and Casarella
(1991) obtained for ReW ! 6050 and with the results of Blake (1970) [extracted from Lee et al. (2005a)] obtained forReW ! 8210. From the inspection of the figure, it is evident that there is an excellent agreement of the presentexperimental curves in the low-mid-frequency range, i.e. for 20ood/uto1760. Moreover, for od/uto800, they are in avery good agreement with the Farabee and Casarella curve and in fair agreement with the Blake data. Finally, thescaled spectra achieved the maximum value for od/utE63. Low-frequency behaviour (od/uto5) is not analysed, sincefrequency resolution is too poor to obtain a realistic trend in this region. Fig. 6 shows the present wall-pressure spectraand the results of Bull and Thomas (1976), Farabee and Casarella (1991) and Blake (1970) scaled on inner flow
ARTICLE IN PRESS
Fig. 3. Streamwise velocity profiles: numerical estimation.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 327
Author's personal copy
variables: on=u2t ; Fpp!o"u2t=t2wn. According to Blake (1986), attenuation in the spectra should occur approximately for
od/U41.2 that implies on=u2t40:3 or 0:42, depending on flow velocity. A collapse of the two sets of measurementsoccurs at high frequency, i.e. for 0:033oon=u2to0:3. The Bull and Thomas and Blake data are in excellent agreement inthe same frequency range, although the Blake curve is higher for higher nondimensional frequencies. On the contrary,the Farabee and Casarella curve shows quite a different trend, characterised by slower high-frequency decay.Differences can be due to spectra attenuation caused by the finite sensor dimensions and, when considering similar d+
values, to the use of different pressure transducers. In particular, the Farabee and Casarella and Blake data wereobtained using open pinhole microphones with d+ # 33 and 68, respectively, while the Bull and Thomas data wereobtained using both filled pinhole microphones and piezoelectric transducers for d+ # 44. For the present data,
ARTICLE IN PRESS
Fig. 5. Wall-pressure spectra scaled on outer flow variables.
Fig. 4. Measured and cleaned pressure auto-spectral density.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342328
Author's personal copy
obtained with piezoresistive pressure transducers, d+ was equal to 84 for the lower velocity and to 125 for the higher.Bull and Thomas (1976) showed that the use of an open pinhole microphone leads to a higher amplitude of pressurespectra for on=u2t40:1. This fact can explain the mismatch between different sets of measurements. Finally, due to thehigh Reynolds numbers, the overlap region had a considerable extension. From the analysis of the range of validity ofthe outer and inner scales or from the direct inspection of the range of validity of the o!1 law, included in both Figs. 5and 6, it can be concluded that the overlap region extends in the range 0:033 Ret " 335o#od=ut$o1760 or0:033o#on=u2t$o#1760=Ret$ " 0:174 where the lowest value of Ret was used.
3.2. Cross-spectral density
The spatial characterisation of WPFs is now analysed extracting from the experimental data the streamwiseFpp0 #x; 0;o$ and the spanwise Fpp0 #0; Z;o$ CSDs. Since the CSD is a complex quantity, as usual, the coherence function
G#x; Z;o$ " jFpp0 #x; Z;o$j. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
F#1$pp #o$ % F#2$pp #o$q
, where in the square root appear the ASDs of the two pressure signals, is
used to display the results and to discuss their comparison with the Corcos and Chase theoretical models. Coherencespectra were obtained for quite a large number of streamwise spacings (0:09px=dp1:44), while only few spanwiseseparations were considered #0:09pZ=dp0:36$, as the coherence decay of the pressure field is very fast in this direction.
3.2.1. The Corcos modelThe model formulated by Corcos expresses the CSD as a product of functions in longitudinal and lateral direction
separately. Moreover, he postulated that the CSD behaviour depends only on the similarity variables ox/Uc and oZ/Uc
with a decay represented by an exponential function. The model for the CSD is given by
Fpp0 #o; x; Z$ " Fpp#o$ ei#ox=Uc$ e!g1 jox=Uc j e!g3joZ=Uc j, (1)
where g1 and g3 are the decay factors.The streamwise coherences relative to the free-stream velocity of 5.3m/s are plotted against the CSD phase y(x,
o) " !ox/Uc in Fig. 7; different curves refer to different values of the nondimensional length x/d. It is evident that athigh frequency a collapse of the coherence spectra into an universal curve occurs independently of the spatialseparation. The theoretical streamwise coherence G#x;o$ " e#!g1 jox=Ucj$ derived from Eq. (1) is plotted in the same figurewith a decay coefficient g1 equal to 0.125. Slightly different values are reported in the literature: Bull (1967) foundg1 " 0.1, Farabee and Casarella (1991) found a decrease in the g1 value with increasing velocity passing from 0.145 forthe lower one to 0.125 for the higher one. On the other hand, in the low-frequency region, a lack of similarity scaling
ARTICLE IN PRESS
Fig. 6. Wall-pressure spectra scaled on inner flow variables.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 329
Author's personal copy
occurs because as far as ox/Uc-0 the coherences do not tend to unity as Corcos model predicts. Unit coherence wouldimply that the low-frequency components should be correlated for all spatial separations: this is physically unrealistic.From the observation of the figure it can also be noted that all curves exhibit a maximum that is indicated by Farabeeand Casarella (1991) as the limit value below which the similarity variables do not hold anymore. The sameconsiderations can be drawn for 3.3m/s; in particular, the best fit of the experimental data is found for the samevalue of g1.Less experimental data concerning spanwise coherence are available in the literature: the value usually suggested for
the decay coefficient g3 is 0.7 (Corcos, 1963; Blake, 1986; Bull, 1967). Fig. 8 shows curves of spanwise coherence relative
ARTICLE IN PRESS
Fig. 7. Streamwise coherence at U ! 5.3m/s.
Fig. 8. Spanwise coherence at U ! 3.3m/s.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342330
Author's personal copy
to the lower velocity for various nondimensional separations Z/d as a function of the similarity variable oZ/Uc. Thethick solid line represents the Corcos model with g3 equal to 0.7. The exponential function seems to correctly estimatethe measured coherences, above their maxima, for value of the nondimensional frequency oZ/Uc40.8. Also in this case,velocity variations seem not to have an influence on the decay coefficient value.
3.2.2. The Chase modelA descriptive model of the wavenumber-frequency spectrum of turbulent wall-pressure was proposed by Chase
(1980) with the intention of overcoming the limitations of models built to capture the characteristics of the convectivedomain only. Starting from the properties of the fluctuating velocity spectrum and considering its relation with thefluctuating pressure, Chase proposed a model able to correctly describe the pressure field in the convective and sub-convective domains. The inverse Fourier transform of the Chase (1980) expression is here proposed in its complete formas determined by Josserand and Lauchle (1989) because, as it will be clear in the following, the assumptions at the basisof some simplifications made by Chase are not necessarily fulfilled. Thus, the complete Chase model in the space-frequency domain is given by
Fpp0 !o; x; Z" # Fpp!o"!Cmf m e$zm e$i!ox=Um" % Ctf t e$zt ei!ox=U t"",
f m #Um!!!!!!!!!!!!!!!!!!!!!!
U2c % h2
mu2t
q a$3m 1% zm % a2mm2m
1$ z2m1
zm% 2iammmzm1
" #,
f t #Ut!!!!!!!!!!!!!!!!!!!!!
U2c % h2t u2t
q a$3t 1% zt % a2t 1% m2t $z2t3 % m2t z2t1
zt
" #% 2iatmtzt1
" #,
zm1 #ammmox
Um; zt1 #
atmtoxUt
; zm3 #amoZUm
; zt3 #atoZUt
; zm #!!!!!!!!!!!!!!!!!!!!z2m1 % z2m3
q,
zt #!!!!!!!!!!!!!!!!!z2t1 % z2t3
q,
Cm #rm
rtf t0 % rmf m0
; Ct #rt
rtf t0 % rmf m0
; rm # 1$ rt,
f m0 #Um!!!!!!!!!!!!!!!!!!!!!!
U2c % h2mu2t
q a$3m !1% a2mm2m"; f t0 #
Ut!!!!!!!!!!!!!!!!!!!!!U2
c % h2t u2t
q a$3t !1% a2t !1% m2t "", (2)
Fpp!o" # rma%r2u4to$1a$3m
Um!!!!!!!!!!!!!!!!!!!!!!U2
c % h2mu2t
q !1% m2ma2m" % rta%r2u4to
$1 Ut!!!!!!!!!!!!!!!!!!!!!U2
c % h2t u2t
q a$3t !1% a2t !1% m2t "",
hi #Ucmi
ut
!!!!!!!!!!!!!1$ m2i
q ; Ui #Uc
1$ m2i; a2i #
1
1$ m2i
$ %%
Ui
bmdo
" #2
; i # m; t.
It can be noted that six free parameters have to be determined by comparison with experimental data. The valuessuggested by Chase, based on the comparison between the experimental data of Bull (1967) and limiting values ofEq. (2), are the following: bm # 0.756, bt # 0.378, mm # 0.176, rt # 0.389, and a+ # 0.766. As pointed out by Chase,these values are not supposed to be universal, as already shown for example by the measurements of Finnveden et al.(2005). In fact, the attempt to fit the experimental data with the Chase model using these values for the free parametersgave unsatisfactory results. Thus, the first five parameters were evaluated using a nonlinear least-square formulationbased on a trust-region approach. The best fit of the experimental streamwise and spanwise coherences for both velocityconditions is found for: bm # 0.51, bt # 0.35, mm # 0.13, mt # 0.4, and rt # 0.3. Fig. 9 presents the comparison amongthe experimental streamwise coherence for U # 5.3m/s, the Chase model, using the identified parameters, and theCorcos model for different values of the ratio x/d. In Fig. 10, the same comparison is shown for the spanwise coherencerelative to U # 3.3m/s. At this time, some considerations must be made: the coefficient bm gives the position of the ASDmaximum that, according to the present measurements occurs for od/utE60; on the other hand, using Chase relations,the maximum is given by o #
!!!2p
Uc=bmd, thus bm # 0.51 is required if Uc # 0.65U is assumed. In fact, the value 0.756suggested by Chase represented an average between the value 0.53 needed to fit the maximum in the Bull spectrum, thusvery close to that already found, and the value 0.9 needed to fit the measured spatial correlation. Preliminarycomparisons between the experimental CSD and the simplified Chase model gave a value for the coefficient mt sensiblyhigher than that suggested by Chase. Thus, it was evident that the hypothesis mm, mt51 at the basis of the simplifications
ARTICLE IN PRESSE. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 331
Author's personal copy
made by Chase was, in this case, not valid. For this reason, the complete form as in Eq. (2) is used to perform theanalysis. It can be concluded that, except for mt and somewhat for mm, the values of the identified parameters are not sofar to those found by Chase analysing pressure experimental data acquired in completely different flow conditions.Finally, a+ is obtained by a direct comparison with the measured ASD (see Fig. 11) when the other coefficients are
fixed. This parameter determines the amplitude of the ASD spectrum and in particular of its maximum, the bestagreement with experimental data is found for a+ ! 0.8. On the other hand, if the interest is not in the maximum but in
ARTICLE IN PRESS
Fig. 10. Spanwise coherence: comparison with theoretical models.
Fig. 9. Streamwise coherence: comparison with theoretical models.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342332
Author's personal copy
the higher frequency scale-independent region, the value of a+ should be 1.5. However, to perform the structuralanalysis described in Section 4.3, the measured ASD was used.
3.3. Convection velocity
Some other insights into spectral characteristics of the WPFs can be provided by examining the convection velocityUc. The convection velocity can be obtained from the phase y!x;o" # $ox=Uc!x;o" of the CSD. In Figs. 12 and 13, the
ARTICLE IN PRESS
Fig. 12. Convection velocity at U # 3.31m/s.
Fig. 11. Auto-spectral density: comparison with Chase model.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 333
Author's personal copy
convection velocities divided by the free-stream velocity U, obtained for fixed spatial separations x/d, are plotted as afunction of the dimensionless frequency od/ut. Different figures refer, as usual, to the two different free-streamvelocities. Farabee and Casarella (1991) have observed a peak value of convection velocity for od/ut ! 50,independently of the x/d values. This peak corresponds exactly to the maximum observed in the spectra and to the valuethat separates the low and the high-frequency behaviour in the coherence function. This fact demonstrated that not onlythe lowest wavenumber components experienced a decay, but that they are also convected at lower overall velocity.In the present case, CSD analysis was performed without using noise cancellation technique to avoid phase alteration.
ARTICLE IN PRESS
Fig. 13. Convection velocity at U ! 5.31m/s.
Fig. 14. Broadband convection velocity.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342334
Author's personal copy
On the other hand, convection velocity obtained by a division for the CSD phase is very sensitive to small disturbancesleading to unreasonable value of the convection velocity. For this reason, frequencies below 25Hz were cancelled outfrom the graph.By inspection of Figs. 12 and 13, an increase of the convection velocity with the growing of the spatial
separation is observed; this trend of Uc is related to an increasing dominance of large-scale events to the two-pointcorrelation as the separation increases. For small separations, the correlation data and hence the convection velocity aredominated by the small-scale eddies close to the wall, which move with a lower velocity than the large-scale events.However, as far as spatial separation increases, the curves tend to collapse in a unique curve indicating that, even if theTaylor frozen flow hypothesis does not strictly hold for the smallest spatial separations, the convection velocity can berepresented as a function of the single variable od/ut. Moreover, with increasing frequency, the convection velocitiesassume a flat trend.The dependence of the convection velocity on the spatial separation can be better highlighted from the analysis of the
space-time correlation functions of the pressure signals. The convection velocity is obtained as the ratio x/t at whichthe cross-correlation Rpp(x,t) has a maximum. In Fig. 14, the convection velocities normalised with respect to thefree-stream velocity for 3.31 and 5.31m/s are depicted as a function of the nondimensional parameter x/d*. Theexperimental data are also compared with those obtained experimentally by Bull (1967) and numerically by Na andMoin (1996). The values of Uc range from 0.6 for the smaller separations associated with the small-scale structures, to0.73 at higher separations, related to the larger ones. From the above considerations, as proposed by several authors,the convection velocity can be modelled with a constant average value between small- and large-scale convectionvelocities, in this case, equal to 0.65U.
4. Structural response analysis
4.1. Identification of modal parameters
Hammer impact tests were performed to determine dry and wet natural frequencies, and then the added fluid mass,modes and modal damping factors of the plate. The first 16 dry natural frequencies omn, wet natural frequencies omn
and their correspondence with the mode shapes were evaluated in two specific frequency ranges: the dry set in125–769Hz and the wet one in the 26–283Hz. Thus, the experimental function of the added mass, me
f !o", was estimatedby the relation (Blevins, 1987):
mef !o" # rsh
omn
omn
! "2
$ 1
" #
. (3)
Since the pressure load spectra exhibited a significant energy content up to 1 kHz, the modal parameters wereevaluated in a larger frequency range, 0–3 kHz, by using a FE model of the plate. The experimental boundaryconditions were reproduced by imposing zero displacement and adding rotational springs along the plate edges; theirstiffness was tuned in order to replicate the experimentally measured natural frequencies.An approximated numerical/theoretical expression for the added mass, valid for structural waves having
wavenumbers greater than the acoustic wavenumber k # o/c, is provided by the relation (Fahy, 1985)
mnf !o" #
rks
, (4)
where ks #################k2
m % k2n
qis the primary effective wavenumber component of the vibration. Hence, the numerical wet
natural frequencies were computed by the following expression:
omn & omn 1%r
rshks
! "$1=2, (5)
where omn are the numerical dry natural frequencies computed by the aforementioned FE model. The primarywavenumber used in Eq. (5) corresponds to simply supported boundary conditions, i.e. km # mp/a and kn # np/b thislast being the only one analytically known. It is clear that this assumption is valid as far as the frequency increases. InFig. 15, the experimental and the theoretical added mass curves, me
f !o" and mnf !o", respectively, for the first 16 modes,
are displayed showing a difference of about 23% for the first mode that decreases, as expected, with increasing modeorder. Moreover, although natural modes of plates surrounded by unbounded fluids are not mathematicallyorthogonal, their shapes remain almost unchanged (Fahy, 1985). This result was partially verified by the experimental
ARTICLE IN PRESSE. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 335
Author's personal copy
analysis. In fact, a modal identification was performed using a number of points, sufficient to identify the mode orderand the position of nodes and maxima along some selected lines, but not to represent the whole mode shapes.In conclusion, to calculate the structural response with the numerical procedure described in the following section: (i)
the dry modes provided by the FE analysis are used, (ii) the first 16 wet natural frequencies were obtainedexperimentally, and (iii) the remaining ones were estimated by using the dry natural frequencies provided by the FEanalysis and Eq. (5).The structural modal damping coefficient, Z, was evaluated from wet hammer impact tests: it decreases from 0.034 for
the first modes to a quite constant value around 0.018 for the higher modes.
4.2. Remarks on the prediction of structural response
A procedure based on the finite element approach was presented and discussed in the recent literature to solve theresponse of a plate under a TBL excitation (De Rosa and Franco, 2007). Specifically, the Corcos model was used forcomparing the numerical response with the exact one, and in order to define a general methodology, able to work forany TBL model at acceptable computational costs. For the sake of clarity, some details are herein briefly recalled.The cited finite element procedure is assembled by using the following equation suitable for all the methods working
with discrete coordinates (Elishakoff, 1983); the CSD matrix of displacements of a structural operator represented byusing NG degrees of freedom and NM mode shapes is given by
SW!o" # UH!o"SU!o"H!o"$UT, (6)
with
SU!o" # UT SFF!o"U, (7)
where U is the structural modal matrix (each column is an eigenvector sampled at the NG selected points), [NG%NM]and the generic term of H(o) is Hj!o" # &o2
j ' o( iZo2j )'1, [NM%NM].
The translation of the distributed random loads to the set of NG points, in other words the way of representing theSFF, can be solved in the framework of the finite element method by using consistent approach, that is by using theshape function vector, N, belonging to each element:
SC!E"FF k;q #Z
x!k"1
Z
x!k"2
Z
x!q"1
Z
x!q"2
NTFpp0 !x!k"1 ; x
!k"2 ; x
!q"1 ; x
!q"2 ;o"Ndx!k"1 dx!q"1 dx!k"2 dx!q"2 , (8)
ARTICLE IN PRESS
Fig. 15. Added mass coefficient.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342336
Author's personal copy
where the double integers k and q indicate here two generic finite elements and the integration is related to the area ofeach of them. The vector N can be interpreted as the interpolating function basis selected by the analyst according to thespecific problem and boundary conditions (Cook, 1981). Thus, Eq. (8) serves to evaluate a generic kqth member of theNE!NE load matrix, where NE is the number of elements. A simplified approach could refer to each grid point ratherthan each finite element. This means that the load acting on the ith grid point will be the resultant of the distributed loadworking on the equivalent nodal area, say Areai, belonging to it. This area vector can be evaluated easily by using astatic deterministic unit pressure load (De Rosa et al., 1994; Hambric et al., 2004). Accordingly, one gets the generic ijthmember of the NG!NG matrix:
SC"G#FF i;j $Z xi%"Dx=2#
xi&"Dx=2#
Z xj%"Dx=2#
xj&"Dx=2#
Z yi%"Dy=2#
yi&"Dy=2#
Z yj%"Dy=2#
yj&"Dy=2#Fpp0 "xi; xj ; yi; yj ;o#dyj dyi dxj dxi. (9)
An area DxDy is assigned to both points P(xi, yi) and Q(xj, yj) and the double space integration refers to these finitedomains. A further approximation could also be introduced, considering that the wall-pressure distribution due to theTBL in the low-frequency range does not fluctuate very quickly. In this case, the last integral could be approximated asfollows:
SL"G#FF i;j $ Fpp0 "xi; xj ; yi; yj ;o#'DxDy(2. (10)
Obviously, the approximations represented by Eqs. (8)–(10) are associated with decreasing computational cost.The problem of the plate response under a convective random load, expressed in discrete form as described by
Eqs. (6) and (7), can be accurately approached only when adequately resolving both the spatial distributions of theresponse function and of the forcing function; in particular, since in this case Uc5cB, the discretisation length, is ruledby the hydrodynamic load.In this work, Eq. (9) was used to calculate the SFF matrix because Eq. (10) was not adequate for the present
simulations. In fact, in the frequency range of interest, Eq. (9) allows the avoidance of the numerical divergence of thestructural response due to the incorrect representation of the pressure load, as approximated by Eq. (10). Some furtherdetails of the numerical simulations are given in the next paragraph. The finite element approach was used to generatethe modal base, while the responses were calculated by a specific Fortran code.
4.3. Experimental analysis and comparisons
The ASDs of the acceleration signals, experimentally measured in eight different points over the plate, werecomputed and the results averaged and compared with the results obtained by the numerical procedure exposed in theprevious section. The numerical results were obtained applying Eqs. (6), (7) and (9) for both the Corcos and Chasemodels.The FE analysis was performed using 61! 21 grid points corresponding to a spatial discretisation of 1 cm in both
directions. The integral in Eq. (9) was calculated using the trapezoidal rule. The hydrodynamic parameters inserted inEq. (9) were those identified in Sections 3.1–3.3; in particular, the experimental ASD was used and the convectionvelocity was assumed constant over the whole frequency range and equal to 0.65U for both ship speeds. After havingperformed the convergence analysis, each integration domain was finally subdivided, for both velocity conditions, ineight intervals when the Corcos model was used and in 24 intervals when the Chase model was used instead. The Corcosnumerical solution of integral in Eq. (9) was compared and validated by an analogous analytical solution (De Rosa andFranco, 2007). In both cases, the number of retained natural modes was 100.The response of the plate was computed for a frequency range between 1 and 1000Hz (the step was 4.5Hz) for the
higher velocity and only between 1 and 600Hz for the lower one, because above this frequency a refined mesh must beused to obtain convergence. In these frequency ranges, the ratio between the bending wavenumber kB $
!!!!!!!!!!!!!rsh=D4
p !!!!op
and the convective wavenumber kc (see Fig. 16) varied between 0.045 and 0.21 for the lowest velocity and between 0.057and 0.35 for the highest velocity.Figs. 17 and 18 present the experimental and numerical averaged ASDs of the plate’s acceleration for 3.3 and 5.3m/s,
respectively.Unsurprisingly, an overestimation of the plate response is evident in the whole frequency range if the Corcos model is
used; on the other hand, the numerical response obtained using the Chase model is undoubtedly in better agreementwith experimental data. However, below 25–30Hz both pressure spectra (although cleaned) and structural response arecontaminated by the carriage vibrations transmitted to the model; thus, any comparison is meaningless. Above thesefrequencies, the agreement is really satisfactory until 420Hz for the lower velocity case and until 650Hz for the higherone. In the high-frequency part, the Chase model tends to slightly underestimate the experimental curve; this fact, more
ARTICLE IN PRESSE. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 337
Author's personal copy
visible for 3.3m/s, can be partly due to the poor spatial resolution of pressure transducers that attenuate the high-frequency part of the ASD spectrum.Finally, an evident mismatch between the experimental and the numerical curve, generated by the presence of high
peaks in the experimental data, can be observed in Fig. 18 around 800Hz probably due to local flow disturbances. Tobetter quantify the difference between model and experimental results, the previous curves are plotted in Figs. 19 and 20in third-octave bands. It can be seen that the root mean square of the difference between the response obtained applyingthe Chase model and the experimental data is 5.2 dB for the lower velocity and 4.1 for the higher one. The responseobtained by using the Corcos model to represent the surface pressure field, overpredicts in both cases the experimental
ARTICLE IN PRESS
Fig. 16. Bending and convective wavenumber ratio.
Fig. 17. Acceleration response spectra at U ! 3.3m/s.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342338
Author's personal copy
data resulting in an average difference of 18 dB. The small gap between the numerical predictions obtained by applyingthe Chase model and the experimental plate response that is less or, at least, of the same order of that found byFinnveden et al. (2005) demonstrated the validity of the developed procedure and the capability of the Chase model torepresent the surface pressure field on a ship hull. However, a more careful determination of the added water mass inthe whole frequency range can improve the numerical estimation, as well as a deep uncertainty analysis can betterindicate the confidence interval of the present results.
ARTICLE IN PRESS
Fig. 18. Acceleration response spectra at U ! 5.3m/s.
Fig. 19. Acceleration response spectra at U ! 3.3m/s, third-octave bands.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 339
Author's personal copy
5. Concluding remarks
In this paper, a complete analysis of the coupled structural-fluid problem concerning the response of an elastic plateinserted in the bottom of a catamaran hull excited by the TBL WPFs, has been carried out.The hydrodynamic analysis, performed on a rigid plate at high Reynolds number and in equilibrium flow conditions
allowed the determination of the appropriate scaling laws for the ASDs in the different frequency ranges. Moreover, theanalysis of the cross-spectral densities in longitudinal and lateral flow directions was used to fit the theoretical models,available for the pressure representation, to the experimental data. Two theoretical models are analysed: the Corcos andChase models. It was demonstrated that it is possible to find for both a complete set of free parameters that provide afair agreement with experimental CSD data.Since spatial resolution was too poor to analyse the CSD behaviour at high frequency and since with this type of
experimental analysis it was not possible to isolate the longest wavelengths, the studied pressure behaviour mainlyconcerned the characteristics of the convective domain. Thus, an indirect comparison based on the vibrational responseof a plate was performed; in particular, the numerical structural responses obtained using the two models werecompared with experimental measurements. The conclusion of this analysis is that, although the Chase model iscomplex and dependent on several empirical parameters, it provides a very good agreement with experimental data atlow wavenumbers. The performed analysis can give interesting information also for the full-scale problem; in fact,considering realistic values of the hydrodynamic and of the structural parameters, coincidence conditions usuallyappear at very low frequency both for underwater and surface marine vehicles.The main disadvantage in using Chase model lies in its non-predictive character. In fact, it was shown that the
original Chase parameters do not fit the experimental data; thus a new set of parameters have been determined and thecomplete version of the model has been used.It is clear that the aim of any numerical procedure is to produce robust predictive tools to be used at the design stage.
Ongoing comparisons between pressure measurements performed on different ship models and for various flowconditions in terms of Reynolds number values are aimed to analyse the range of variability of the parameters and theirdependence on the particular flow conditions.
Acknowledgement
The research was supported by the Ministero dei Trasporti in the frame of ‘‘Programma Ricerche Luglio2006-Dicembre 2007’’.
ARTICLE IN PRESS
Fig. 20. Acceleration response spectra at U ! 5.3m/s, third-octave bands.
E. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342340
Author's personal copy
References
Abraham, B.M., 1998. Direct measurements of the turbulent boundary layer wall pressure wavenumber-frequency spectra. ASMEJournal of Fluids Engineering 120, 29–39.
Bendat, J.S., Piersol, A.G., 1991. Random Data: Analysis and Measurements Procedure. Wiley, New York.Blake, W.K., 1970. Turbulent boundary-layer wall-pressure fluctuations on smooth and rough walls. Journal of Fluid Mechanics 44,
637–660.Blake, W.K., 1986. Mechanics of Flow Induced Sound and Vibration. Academic Press, Orlando.Blevins, R.D., 1987. Formulas for Natural Frequency and Mode Shape. Robert E. Krieger Publishing Company, Melbourne, FL.Bull, K.M., 1967. Wall pressure fluctuations associated with subsonic turbulent boundary layer flow. Journal of Fluid Mechanics 28,
719–754.Bull, M.K., 1996. Wall pressure fluctuations beneath turbulent boundary layers: some reflections on forty years of research. Journal of
Sound and Vibration 190, 299–315.Bull, M.K., Thomas, S.W., 1976. High frequency wall pressure fluctuations in turbulent boundary layers. Physics of Fluids 19,
597–599.Chang, P.A., Piomelli, U., Blake, W.K., 1999. Relationship between wall pressure and velocity-field sources. Physics of Fluids A 11,
3434–3448.Chase, D.M., 1980. Modelling the wavevector-frequency spectrum of turbulent boundary layer wall pressure. Journal of Sound and
Vibration 70 (1), 29–67.Choi, H., Moin, P., 1990. On the space-time characteristics of wall pressure fluctuations. Physics of Fluids A 2, 1450–1460.Ciappi, E., Magionesi, F., 2005. Characteristics of the turbulent boundary layer pressure spectra for high speed vessels. Journal of
Fluids and Structures 21, 321–333.Cook, R.D., 1981. Concept and Application of Finite Element Analysis. Wiley, New York.Corcos, G.M., 1963. Resolution of pressure in turbulence. Journal of the Acoustical Society of America 35, 192–199.De Rosa, S., Franco, F., 2007. Exact and numerical responses of a plate under a turbulent boundary layer excitation. Journal of Fluids
and Structures 24, 212–230.De Rosa, S., Pezzullo, G., Lecce, L., Marulo, F., 1994. Structural acoustic calculations in the low frequency range. AIAA Journal of
Aircraft 31 (6), 1387–1394.Efimtsov, B.M., 1982. Characteristics of the field of turbulent wall pressure fluctuations at large Reynolds numbers. Soviet Physics-
Acoustics 28 (4), 289–292.Elishakoff, I., 1983. Probabilistic Methods in the Theory of Structures. Wiley, New York.Fahy, F., 1985. Sound and Structural Vibration. Academic Press, Orlando.Farabee, T.M., Casarella, M.J., 1991. Spectral features of wall pressure fluctuations beneath turbulent boundary layers. Physics of
Fluids A 3, 2410–2420.Farabee, T.M., Geib, F.E., 1991. Measurements of boundary layer pressure fluctuations at low wavenumbers on smooth and rough
walls. In: ASME Symposium on Flow Noise Modelling, Measurements and Control, NCA-vol. 11, FED-vol. 130, pp. 55–68.Ffowcs Williams, J.E., 1982. Boundary layer pressures and the Corcos model: a development to incorporate low wavenumber
constraints. Journal of Fluid Mechanics 125, 9–25.Finnveden, S., Birgersson, F., Ross, U., Kremer, T., 2005. A model of wall pressure correlation for prediction of turbulence-induced
vibration. Journal of Fluids and Structures 20, 1127–1143.Goody, M., 1999. An experimental investigation of pressure fluctuations in three-dimensional turbulent boundary layers. Ph.D. Thesis,
Department of Aerospace and Ocean Engineering, Virginia Tech, USA.Graham, W.R., 1997. A comparison of models for the wavenumber-frequency spectrum of turbulent boundary layer pressures. Journal
of Sound and Vibration 206 (4), 541–565.Hambric, S.A., Hwang, Y.F., Bonness, W.K., 2004. Vibrations of plates with clamped and free edges excited by low-speed turbulent
boundary layer flow. Journal of Fluids and Structures 19, 93–110.Han, F., Bernhard, R.J., Mongeau, L.G., 1999. Prediction of flow-induced structural vibration and sound radiation using energy flow
analysis. Journal of Sound and Vibration 227 (4), 685–709.Hwang, Y.F., Maidanik, G., 1990. A wavenumber analysis of the coupling of a structural mode and flow turbulence. Journal of Sound
and Vibration 142, 135–152.Keith, W.L., Hurdis, D.A., Abraham, B.M., 1992. A comparison of turbulent boundary layer wall-pressure spectra. ASME Journal of
Fluids Engineering 114, 338–347.Josserand, M.A., Lauchle, G.C., 1989. ERRATA: D.M. Chase JSV 1980. Journal of Sound and Vibration 128, 519–523.Lee, Y.T., Blake, W.K., Farabee, T.M., 2005a. Modeling of wall pressure fluctuations based on time mean flow field. ASME Journal of
Fluids Engineering 127, 233–240.Lee, Y.T., Miller, R., Gorski, J., Farabee, T., 2005b. Predictions of hull pressure fluctuations for a ship model. In: Proceedings of
International Conference on Marine Research and Transportation (ICMRT05), Ischia, Italy.Manoha, E., 1996. The wavenumber-frequency spectrum of the wall pressure fluctuations beneath a turbulent boundary layer. In:
Proceedings of the AIAA Aeroacoustics Conference, AIAA paper 96-1758.Na, Y., Moin, P., 1996. Direct numerical simulation of turbulent boundary layers with adverse pressure gradients and separation.
Report No. TF-68. Thermosciences Division, Department of Mechanical Engineering, Stanford University.
ARTICLE IN PRESSE. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342 341
Author's personal copy
Panton, R.L., Robert, G., 1994. The wavenumber-phase velocity representation for the turbulent wall-pressure spectrum. ASMEJournal of Fluids Engineering 116, 477–483.
Smol’yakov, A.V., Tkachenko, V.M., 1991. Model of pseudosonic turbulent wall pressures and experimental data. Soviet Physics-Acoustics 37 (6), 627–631.
Willmarth, W.W., Wooldridge, C.E., 1962. Measurements of the fluctuating pressure at the wall beneath a thick turbulent boundarylayer. Journal of Fluid Mechanics 14, 187–210.
ARTICLE IN PRESSE. Ciappi et al. / Journal of Fluids and Structures 25 (2009) 321–342342
Ciappi et al., 2009; Efimtsov, 1982) for the cross spectral density (CSD) of wall pressure fluctuations (WPF). Thesequantities represent the input for the structural analysis. The identification of the scaling laws permits to make pressurespectra independent of the test conditions (i.e. of Reynolds number) and extrapolate data at full scale from low Reynoldsnumber laboratory experiments. The CSD models are supposed to be valid only under the hypotheses of two-dimensionalfully developed turbulent boundary layer with zero pressure gradient acting on a flat plate and contain empiricalparameters usually obtained from experimental data. Unfortunately, these parameters are not always universal butnecessitate dedicated experimental campaigns to be defined. A comparison between the most popular CSD models can befound in Graham (1997) and Hambric et al. (2004).
Besides being time demanding and expensive, a model scale experiment for this kind of measurements would onlyprovide a partial information about the physics of the problem. For example, standard experimental set-up and dataanalyses for WPF characterization, that make use of a spatial domain comparison between measured CSD spectra andtheoretical models, are inadequate to indicate which one is the best for the description of WPF in the differentwavenumber regions. In fact, most of the energy of WPF is concentrated around the convective peak and any correlationdata are mainly the representation of the convective character of the TBL. Only direct measurements of the wavenumber-frequency spectra could give significant insight, but only few experimental data have been made by using this approach(Abraham, 1998), due to the complexity of the experimental set-up and of the data analysis.
For these reasons, the definition of a predictive model able to represent correctly the spatial variation of the wallpressure field, in all the frequency and wave-number ranges, is still an open issue.
On the other hand, the numerical solution of the structural equations, especially when dealing with complex structuressuch as an aircraft fuselage or a ship hull, deserves some attention. When the structural wavelengths are small comparedto the typical dimension of the problem, i.e. at high frequency, the number of degrees of freedom, necessary to calculateaccurately the structural response, increases rapidly. In this frame, energy methods such as the Statistical Energy Analysis(Lyon and De Jong, 1995) can be invoked at high excitation frequencies. However, the definition of the input power,starting from a general model for the pressure cross spectral density not using the separation of variables, can be very
Nomenclature
Roman Symbols
a streamwise plate lengthAQjQk
joint acceptance between the jth and kth modesb crosswise plate lengthcB flexural wave speedcL longitudinal wave speedD plate stiffnessE Young’s modulusf excitation frequencyh plate thicknessHi ith term of structural transfer functions matrix
for the platei imaginary unitkc convective wavenumberLj reciprocal of the structural transfer functions
matrix, Hj(o)"1/Lj(o)Lx streamwise correlation lengthLy crosswise correlation lengthp pressurePIN input powerr absolute distance vectorR non-dimensional metric responseRey Reynolds number based on momentum
thicknessSp power spectral density of the wall pressure
distribution due to the turbulent boundary layerSw power spectral density of the plate displacementSw, mean mean value of the power spectral density of the
plate displacement over the structural domainU free stream (undisturbed) velocity
Uc convective velocityut friction velocityv cinematic viscosityw out of plane displacement of the platex streamwise reference axisXpp cross spectral density of the wall pressure dis-
tribution due to the turbulent boundary layery crosswise reference axis
Greek symbols
ax streamwise correlation coefficientay spanwise correlation coefficientG spatial correlation function in the cross
spectrumgj generalized mass coefficient for the jth moded turbulent boundary layer thicknessd* displacement thicknessZ structural damping factoru Poisson’s ration relative distance vector: n(xx,xy )xx streamwise spatial separationxy spanwise spatial separationl plate flexural wavelengthrf fluid densityrs material densityF dimensionless function—average value of the
joint acceptance integralci ith analytical mode shape of the bare plate
(without any added mass)o circular excitation frequency ("2pf)oj natural circular frequency of the jth mode
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–103 91
complicated and time consuming. Interesting advances are in Totaro et al. (2008) and in Totaro (2004), and those findingsare here fruitfully used; other research works, which have addressed the problem of the computational cost versus thefrequency bandwidth of interest (De Rosa and Franco, 2008; Hong and Shin, 2010; Ichchou et al. 2009), have to cited too.
A chance to drastically reduce the computational time can be the identification of scaling laws for the structuralresponse able to determine, at least for a certain class of problems, a unique representation of the response independent ofthe particular flow conditions or structural properties.
In this work a dimensional analysis is used to recover the dimensionless parameters for the definition of the scalinglaws for the required axes: the excitation frequency and the power spectral density of the response. The structure is a thin,flat and elastic plate with no pre-stresses wetted over one face by a stationary turbulent boundary layer in anincompressible flow with zero pressure gradient.
The obtained dimensionless groups are used to report and compare on dimensionless scales three analytical responsesobtained with the modal approach and, more important, four data sets measured in different conditions both in windtunnels and in a towing tank. The functional relations between the physical parameters are discussed and an analyticalexpression for the dimensionless plate response is also derived. It is shown that the functional group in Totaro et al. (2008)is here found by invoking a dimensional analysis. It includes the main dimensional variables for the plate response and thefluid velocity, as expected. The collapse of the different experimental plate responses, as consequence of the choice of thedimensionless functional groups, is very encouraging. The proposed scaling laws are successively and successfully appliedto four data sets measured in different conditions both in wind tunnels and in a towing tank.
The work is structured as follows. After this introduction, Section 2 summarizes all the theoretical backgrounds for theevaluation of the modal and energy response of a plate under a convective and turbulent pressure load; further, it presentsthe dimensional analysis and the derivation of the dimensionless parameters governing the problem. In Section 3, all theexperimental set-up and data are presented, together with the resulting dimensionless forms of the structural responses.Finally, Section 4 remarks the main achievements of the present work.
2. Theoretical models and dimensional analysis
2.1. Modal response
The mechanical system under study is a thin, flat, homogeneous, isotropic plate with no pre-stress (no pressurizationand no edge loadings), where only flexural waves are considered. The plate is mounted on an infinite rigid plane baffleflush with the TBL, and it is considered belonging to a xy plane; the flexural out-of-plane displacements, named w#x,y,t$,are along the z axis, while the flow is along the x direction. The side lengths are a and b, in the stream-wise and cross-wisedirection, respectively.
In the present analysis the aeroelastic coupling effects on the structural dynamic response of the plate can be taken intoaccount by introducing the wetted natural frequencies and mode shapes. This information requires the evaluation of theadded mass due to the fluid, which is generally negligible in air, but induces significant modifications in the modalparameters for heavy fluid like water (Ciappi et al., 2009). Moreover, a one-way coupling between the structure and thefluid is assumed, i.e. the elastic deformation does not affect the fluid dynamic field.
The displacement cross spectral density between any arbitrary couple of points belonging to the plate, A(xA,yA) andB(xB,yB), due to an assigned stochastic distributed excitation, can be found with the following modal expansion as given inElishakoff (1983):
Sw#xA,yA,xB,yB,o$ "X1
j " 1
X1
k " 1
cj#xA,yA$ck#xB,yB$Ln
j #o$Lk#o$
" #
USp#o$#ab$2
gjgk
" #
AQjQk#o$, #1$
with
AQjQk#o$ "
Z a
0
Z a
0
Z b
0
Z b
0
Xpp#$x,y,x0,y0,oSp#o$#ab$2
cj#x,y$ck#x0,y0$
" #dydy0dxdx0, #2$
gj "Z a
0
Z b
0c2
j #x,y$dydx; Lj#o$ " rsh%o2j &o2! iZo2
j ': #3$
The symbol ci denotes the ith mode shape and oi the ith natural radian frequency. The integrals defined by the symbolAQjQk are well known also as the acceptances: joint acceptance for j"k, or cross acceptance for jak. The formulationcontained in the Eqs. (1) and (2) can be applied to any structural operator once assumed its modal base.
From the analysis of Eq. (2), it is evident that the quality of the predictions is strictly related to the spatialcharacterization of wall pressure fluctuations expressed in terms of its cross-spectral density function Xpp.
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–10392
2.2. Dimensional analysis
In order to find a dimensionless representation for the structural response an approach based on dimensional analysisis here used. Within the present approach, the power spectral density of the plate displacement is considered as the outputvariable.
It is well known that the cross spectral density of wall pressure fluctuations Xpp can be written in general form as theproduct of the power spectral density Sp in a reference point and a spatial correlation function G between two points,whose distance is xx and xy in streamwise and spanwise direction, respectively, as shown in the following equation:
Xpp#xx,xy, ,o$ " Sp#o$G#xx,xy, ,o$: #4$
Both terms of the right-hand side of Eq. (4) are in general complex functions of flow parameters. In particular, the singlepoint spectral density depends on the boundary layer characteristic lengths d, d*, on the characteristic velocities U and utand on the flow properties namely rf and v. According to the scaling laws provided by several authors (Ciappi et al., 2009;Keith et al., 1992) and on the corresponding analytical formulation (Goody, 2004), the role of d and d* is equivalent thus,only d is retained for the dimensional analysis.
The semi-empirical models available in the scientific literature to represent the function G suggest different functionaldependences on flow parameters. The most popular of them is the Corcos (1964) model, which considers the dependenceon the convection velocity Uc, only, whereas more sophisticated models (Chase, 1980; Efimtsov, 1982) include also thedependence on d and ut. Thus, Eq. (4) can be rewritten in the more general form as
Xpp " Sp#o,d,U,ut,rf ,n$G#xx,xy,o,d,Uc ,ut$: #5$
In view of a dimensional analysis related to the evaluation of the structural response, it is convenient to considerdirectly as one of the dimensional parameter the power spectral density of wall pressure fluctuations. In this case thedependence on rf and v, appearing only in the first term of Eq. (6), is not considered explicitly. The same considerationshold for U.
Under the above assumptions, the plate response to the pressure field induced by a turbulent boundary layer, accordingto Eq. (1), can be represented as a generic function f depending on both the following dimensional fluid dynamic andstructural variables:
f #Sw,Sp,o,d,Uc ,ut,rs,E,Z,h,a,b,xx,xy$ " 0, #6$
where rs is the material density, E the Young modulus, Z is the total damping coefficient (sum of the material and of theaero/fluid dynamic damping) and h, a, b are the plate thickness, length and width, respectively. In Eq. (6) there are 14dimensional parameters thus, according to the Buckingham theorem (Buckingham, 1914), there are 11 dimensionlessparameters governing the problem. The identification of these last is not unique but one set is given by
SwUc
h3;rs
!!!!!!!!!!!Uc
3hSp
s
; E
!!!!!!!!!!h
SpUc
s
;ohUc
;utUc;ah;bh;dh;xx
h;xy
h;Z: #7$
Then, the power spectral density of the plate displacement can be rewritten in the following form:
Sw "h3
Ucg rs
!!!!!!!!!U3
c hSp
s
,E
!!!!!!!!!!h
SpUc
s
,ohUc
,utUc
,ah
,bh
,dh
,xx
h,xy
h,Z
0
@
1
A: #8$
From the analysis of these parameters it is straightforward to define a dimensionless frequency
on "ohUc
: #9$
Eq. (9) can be also expressed by introducing the flow convective wavenumber kc " #o=Uc$, the structural bending
wavenumber kB "!!!!!op !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#12rS#1&n2$=Eh2$4
q, the flexural and longitudinal structural wave speed cB " #o=kB$ and
cL "!!!!!!!!!!!!!!!!!!!!!!!!!!!!#E=rs#1&n2$$
p, respectively
onpkc
kB
cB
cL, #10$
thus highlighting that the dimensionless frequency relates the convective and the structural wavenumbers.At this stage a critical analysis of the identified parameters is fundamental to recognize which of them are the most
significant for the plate response.Dimensionless ratios a/h and b/h are strictly related to the structural model used to describe the plate motion. In the
present analysis only thin plates (i.e. governed by the Kirchoff equation) (Graff, 1991) are considered and then the value ofthese two parameters can be assumed definitely large.
The dimensionless parameter d=h indicates the fluid-structure degree of coupling for conventional plates; it is excludedthe analysis of the cases of thick and flexible plates. More specifically, it can be interpreted as a measure of the influence ofthe structural deformation on the flow field. Consistent numerical values of d and h for the present test cases indicate that
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–103 93
d=hb1 moreover, since the order of magnitude of the displacement response is of the same order of magnitude than theplate thickness, it does not affect the fluid domain, indicating a one-way coupling between the structure and the fluid.
Furthermore, if it is assumed that the major contribution to the plate response is due to diagonal terms of the cross-spectral density matrix, xx/h and xy/h can be neglected too.
Finally, although the ratio #ut=Uc$ for an equilibrium boundary layer over a flat plate is a function of the Reynoldsnumber (Schlichting, 1978), its variation is small and can be considered of minor importance.
Damping coefficient can be introduced by defining a complex longitudinal wave speed #cnL $
2pcL2#1&#Z2=4$$, (Cremer
and Heckl, 1987); however, for the considered plates damping coefficient values are approximately the same thus, in whatfollows Z is neglected.
The only two dimensionless parameters that seem important for the present problem are those involving the pressurepower spectral density.
Without any further considerations on the physics of the problem, the plate response can be dependent on one of themor on a combination of the two. Nevertheless, in order to make the plate response independent of the input it seemsconvenient to consider the ratio Sw/Sp as done already in Finnveden et al. (2005).
Thus, it is possible to define three possible functional dependences for the spectral density functions related to the platedisplacement, by evidencing also a generic function, g, of the dimensionless frequency, o*
Sw "h3
UcE
!!!!!!!!!!h
SpUc
s !&2
g#on$, #11$
Sw "h3
UcrsE
!!!!!!!!!!h
SpUc
s !!!!!!!!!U3
c hSp
s0
@
1
A&1
g#on$, #12$
Sw "h3
Ucrs
!!!!!!!!!U3
c hSp
s0
@
1
A&2
g#on$: #13$
Accordingly, it is possible to define three dimensionless displacement functions of the dimensionless frequency o* only
Sw
Sp
Eh
" #2
"Sw
Sp
rs
h
$ %2c4
L " gI#on$, #14$
Sw
Sp
Uc
h
" #2
rsE"Sw
Sp
Uc
h
" #2
r2s c2
L " gII#on$, #15$
Sw
Sp
rs
h
$ %2U4
c "Sw
Sp
Eh
" #2 Uc
cL
" #4
" gIII#on$: #16$
The capability of Eqs.(14)–(16) to produce a data collapse and the functional dependence on the dimensionlessfrequency is investigated in Section 3.2 from the direct analysis of the experimental data presented in Section 3.1.
2.3. Energy response
The analysis of an energy model for the response of the plate can be difficult since a correct representation of the powerinput is needed. This aim is addressed in the work by Totaro (2004) and Totaro et al. (2008), using, as fundamental relationship,the modal response expressed in Eq. (1). Specifically, the main TBL models, due to Corcos, Corcos with Davies approximation(Davies, 1971), Efimstov and Blake, are investigated. In Totaro et al. (2008), the following representation is adopted:
PIN#o$ " Zo3abrShSw,mean; #17$
PIN#o$pSp#o$ab
2rShU2
c
o2
!!!!!!!!!rhD
U
rF#a,b,Uc ,o,rS,cL$: #18$
The dimensionless function F represents the average value of the joint acceptance integral in wavenumber space; thisterm depends on the selected model for the TBL excitation. PIN and Sw,meandenote the input power and the mean response.It is straightforward to get that
Sw,mean#o$Sp#o$
h2
r2S cLU3
c
!1Z
" #&1
pUc
oh
" #4
UF#a,b,Uc ,o,r2S ,cL$;
Sw,mean#o$Sp#o$
Zr2S cLU3
c
h2
!" gIV #on$:
#19$
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–10394
Therefore, a full dimensionless response is again obtained and it evidences the same group highlighted in the previoussection with a classical dimensional analysis, Eqs. (14)–(16). According to the present result, the dependence is with thefourth power of the reciprocal of the dimensionless frequency. All the remaining frequency dependence is left in the Ffunction in which they can be attributed specifically to the difference among the TBL models.
2.4. Results
The approximate solution of the Eq. (1), when the TBL source model is due to Corcos with the Davies approximation, isin Fig. 1; the main parameters for the tested plates are summarized in Table 1. It is evident how the functional groupsassociated in with the gIV function works well in unifying the responses.
It has been also performed a full analysis of the problem by invoking a scheme in which the joint acceptance is solvedanalytically, Eq. (2); the results are in Fig. 2. The main difference among these analytical results is in the low frequencyrange, which is dominated by the first resonating structural modes.
Rather than discussing all the possible effects of the adoption of any of the g formulations, moreover with reference toall possible TBL model, it has been decided to apply directly the derived g functions on the experimental data.
3. Experimental measurements
3.1. Description of the set-up
The four data sets, considered for this analysis, regard incompressible and steady turbulent boundary layers in almostzero pressure gradient flow acting on thin and flat plates.
The boundary conditions of the plates were neither measured nor estimated since this information is relevant only forthe tuning of the predictive modal models: this falls outside the present aims.
Fig. 1. Analytical responses for three different plates excited by a Corcos TBL source with Davies approximation.
Table 1Parameters for the configuration used in the analytical responses.
Conf 1 Conf 2 Conf 3
Material Aluminum Steel PVCDensity (kg/m3) 2700 7500 1400Young’s modulus 7.1E!10 21.1E!10 4.5E!9Plate thickness (mm) 0.5 2.0 1.0Plate length (m) 0.4 0.7 0.372Plate width (m) 0.3 0.2 0.22Fluid density (kg/m3) 1000 1.225 1.225Speed of sound (m/s) 1000 340 340Asymptotic speed (m/s) 5 100 72Damping loss factor 0.02 0.04 0.05
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–103 95
Among the large amount of data available in the literature on wall pressure and induced structural vibrations, theseexperimental setups are the few ones able to provide, for each test case, information on both pressure fluctuations andstructural deformations acquired in the same facility and in the same nominal conditions. As it is specified in the nextsection this aspect is fundamental for the validation of the proposed scaling procedure.
The first two sets of data are extracted from a database containing measurements of wall pressure fluctuations andstructural response acquired in the INSEAN towing tank. The first one is relative to an experimental campaign performedon a 1:15 model of a catamaran hull (Fig. 3). A thin PVC plate is inserted in the bottom of the hull in correspondence of thestern region; pressure and acceleration measurements are performed for model speeds of 3.3 m/s and 5.3 m/s,respectively. A complete description of this experimental campaign can be found in Ciappi et al. (2009).
The second set of data belongs to an experimental setup designed to measure wall pressure fluctuations and theresponse of elastic portions of a 1:8 scaled bulbous model of a surface ship (Fig. 4). The considered data regard the sternmeasuring section where the flow reaches quasi stationary conditions and where pressure gradient effects, due both towater surface deformation and to structural curvature, can be neglected, (Magionesi and Ciappi, 2010a, 2010b). The elasticelement inserted in the model is an PVC thin plate, the model velocity in this case ranges between 3.636 m/s and 6.36 m/s.A complete description of this experimental campaign can be found in Magionesi and Ciappi (2010a, 2010b).
The last two sets of data are obtained from measurements performed in aerodynamic tunnels. The former is due toFinnveden et al. (2005) in the frame of ENABLE project: it consists of an aluminum plate exposed to flow velocities of 80,100 and 120 m/s, respectively.
The latter is part of the experimental campaign performed by Totaro et al. (2008) on four different plates of differentgeometries and materials. The data considered for this analysis regard the PVC plate for flow velocities equal to 35 and50 m/s, respectively. Table 2 presents the principal characteristics of the four plates. Table 3 lists the principal mean flowTBL parameters of the 10 experimental test cases.
The chosen four data sets have the aim to analyze complete different flow conditions and structural configurations.The power spectral densities of the plate responses are represented by their mean response over 8 points for plate 1, 3
points for plate 2 and 5 points for plate 3. The reference power spectral densities of wall pressure fluctuations arerepresented by their average over 10 points for plates 1 and 2 and 19 points for plate 3. Data for plate 4 are directly derivedfrom Fig. 18 of the paper by Totaro et al. (2008) in terms of metric response R defined as
R"o4Sw#rsh$
2
Sp: #20$
In the same work it is stated that the plate velocity response acquired with a laser vibrometer is averaged over 75 points.Values for the convection velocity are usually obtained from time domain cross-correlation analyses or from the phase
of the cross spectral densities. The values of Uc used for the present analysis come from the results given in Ciappi et al.(2009), Finnveden et al. (2005), Magionesi and Ciappi (2010a, 2010b) and Totaro et al. (2008) and are listed in Table 3.
It is important to remark that Eq. (20) represents the first attempt to make the power spectral density of the plateresponse dimensionless and independent of the power spectral density of WPF as done in Finnveden et al. (2005), De Rosaand Franco (2008) and Ciappi et al. (2009). However, the spatial characteristics of the fluid–structure interaction are nottaken into account neither in the response axis nor in the frequency one. In the next section, it is shown that thisrepresentation does not lead to a collapse of the spectra. In fact, for the selected test cases, the fluid–structure coupling is
Fig. 2. Analytical responses for three different plates excited by a Corcos TBL source.
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–10396
Fig. 3. Catamaran model and setup.
Test section
Fig. 4. Scaled (1:8) bulbous model.
Table 2Dimensions of the plates and material properties.
Plate 1 Plate 2 Plate 3 Plate 4
Material PVC PVC Aluminum PVCDensity (kg/m3) 1190 1190 2700 1400Young’s modulus 3.2E!9 3.2E!9 7.1E!10 4.5E!9Thickness (mm) 3.0 3.3 1.6 1.0Length (m) 0.6 0.242 0.768 0.6Width (m) 0.2 0.144 0.328 0.3
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–103 97
of different kind in the frequency ranges of interest (sub-convective, convective and super-convective bandwidths).Furthermore, these frequency ranges can be completely different among all possible experimental configurations. As aconsequence, the only normalization of the frequency axis is not sufficient, too.
3.2. Application of the scaling laws
The proposed dimensionless forms of the structural response, Eqs. (9), (14)–(16), (19) are applied to the data setsdescribed in Section 3.1.
In Fig. 5 the ratio between the acceleration and the pressure power spectral densities are shown for the test cases mentionedbefore. Due to the difference between the test conditions of the four data sets in terms of both fluid dynamic and structuralparameters, with particular reference to flow velocity values, the plate responses exhibited different amplitudes. This isparticularly evident in the low-mid frequency range, 10C103 Hz. In this region, the sizeable gap in the curve level is related to thedifferent values assumed by the ratio between the structural and the aero/fluid-dynamic wavenumbers.
In particular for the aerodynamic case (Plates 3 and 4) structural wavenumbers are smaller than flow wavenumbersuntil the so-called coincidence frequency. Therefore, the structural responses are dominated by the convectivecomponents of the pressure field for a large part of the frequency range; in correspondence of the coincidence frequencies,around 700 Hz, they reach the maximum values.
On the contrary, for Plate 1 and 2 the coincidence frequencies are below 1 Hz; this indicates that they receive energymainly from the sub-convective component of the pressure field. As a consequence of this, the spectrum amplitude doesnot display a distinct maximum.
It is interesting to analyze what happens if the metric response of Eq. (20) is adopted, as reported in Fig. 6. It is evidentthat the gap between different data sets remains large since the proposed dimensionless form does not produce a collapse
Fig. 5. Ratio between acceleration and pressure power spectral densities.
Table 3TBL mean flow parameters.
Plate Fluid U (m/s) d (mm) ut (m/s) Uc (m/s)
1 and 2 Water 3.30 120.0 0.110 0.70 U5.30 113.0 0.1633.64 51.0 0.102 0.65 U5.45 49.7 0.1476.36 48.0 0.171
3 Air 80.00 50.0 2.600 0.75 U100.00 3.100120.00 53.0 3.700
4 35.00 55.0 1.4 0.62 U50.00 85.0 1.960
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–10398
between different curves of the same data set either. As already said this dimensionless form for the structural responsedoes not contain any information about the spatial characteristics of the fluid–structure interaction.
In Fig. 7 the same experimental curves are represented in terms of the ratio between the power spectral densities of theplate displacement and of the pressure. The considerations done for the contents of Fig. 5 hold in this case as well.
In order to investigate the validity of the dimensionless functional relations provided by the dimensional analysisperformed in Section 2.2, the plate spectra are scaled according to Eqs. (14)–(16) and the corresponding results arereported in Figs. 8–10, respectively.
The first non-dimensional quantity, defined by Eq. (14), is represented in Fig. 8 on the y-axis to check its attitude toprovide a universal scaling of the four data sets. The results clearly indicate an excellent collapse of the three curvesrelative to Plate 3; moreover, the curves relative to Plate 4 show the same trend in a quite similar non-dimensionalfrequency range and a complete superposition with the previous ones. Curves relative to Plate 1 and 2 exhibit a goodcollapse with the other ones mostly for the higher values of the dimensionless frequency well above the convective range.
On the other hand, from the inspection of Figs. 9 and 10, it appears that Eqs. (15) and (16) do not lead to a collapse ofthe experimental data. The main difference between Eq. (14) and Eqs. (15) and (16) is the explicit presence of the flowvelocity as one of the scaling parameters for the response axis (it always appears in defining, together with the platethickness, the reference time scale of the dimensionless frequency axis). In particular, focusing on the curves relative to the
Fig. 6. Metric responses R.
Fig. 7. Ratio between displacement and pressure power spectral densities.
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–103 99
same plate, it is evident that the introduction of Uc to scale #Sw=Sp$ seems to prevent the data to collapse. Additionally, it isworthwhile to highlight that, passing from Eqs. (15) to (16), that is, with a higher power of Uc in the dimensionlessfunctional representation, the gap between the different curves increases considerably, confirming that the proposeddependence on the convective speed, Uc, is incorrect.
With reference to Fig. 8, it is then possible to find the functional relation between the dimensionless response and thedimensionless frequency. Three distinct regions can be identified. Different slopes of the linear regression curvescharacterize each of them (in logarithmic scale); their expressions are well approximated by the simple relations
Sn
w "
4108#on$&4 ohUc
o0:07;
1108#on$&8 0:07oohUc
o0:21;
2107#on$&3 ohUc
40:21;
8>>>>>>><
>>>>>>>:
#21$
and they are drawn for comparison in Fig. 8, along with the experimental measurements.Although these frequency regions cannot be recast exactly in terms of the ratio between the bending and the convective
wavenumbers, some general considerations can be drawn. In particular, for low values of o*, the first relations of Eq. (21)
Fig. 8. Dimensionless plate displacement (Eq. (14)).
Fig. 9. Dimensionless plate displacement (Eq. (15)).
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–103100
represent the amplitude of the response for frequencies that are around the coincidence frequency i.e., for values ofkB=kc ( 1. The second and the third relations represent the amplitude of plate response in correspondence of frequenciesfor which the ratio kB=kc ( 1.
It is straightforward now to introduce what already presented in Fig. 2, derived with reference to Eq. (19). Thisrelationship is based on the balance between the input power and the energy content of the structural domain. In fact, it isthe only dimensionless form directly involving the structural damping.
Eq. (19) is shown in Fig. 11 when applied to the four sets of experimental data set.The experimental results, in this dimensionless form, are perfectly in agreement with those analytical presented in
Fig. 2 and show a good collapse. It is worthwhile to recall that the analytical results are based on the Corcos TBL model andon structural and flow characteristics different from the experimental ones. The dimensionless curves of the experimentaldata separate in the low frequency bandwidth as already shown in the analytical results.
It is possible to check that, in logarithmic scale, the experimental measurements collapse on a simple curve
Sn
w " 3:310&1#on$&4:8 ohUc
40:04: #22$
Fig. 10. Dimensionless plate displacement (Eq.(16)).
Fig. 11. Dimensionless plate displacement (Eq. (19)).
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–103 101
Some remarks are needed about this regression: (i) the power of the dimensionless frequency is not equal to fourbecause the g function includes the average value of the joint acceptance integral, which is a function of frequency, too; (ii)the law has been obtained by using the analytical responses presented in Fig. 2.
At this time, some considerations on the usefulness and practical relevance of dimensionless relations can be done. Asalready underlined in this work, scaling laws for the power spectral density of WPF exist and are well established.Analytical expressions for pressure PSD make use of some basic TBL mean flow parameters such as the boundary layerthickness and the friction velocity. Thus, starting from the desired test conditions in terms of material properties,geometrical configurations and undisturbed flow velocity and, assuming that the convection velocity can be represented asa constant fraction of U, it is possible, from the knowledge of d and ut only, to give a quick estimate of the amplitude of thestructural response spectra in the whole frequency range.
It is not worthwhile to recall that Eq. (21) are obtained by invoking a dimensional analysis; on the contrary, Eq. (19)comes from an energy-based formulation. For all the results presented herein, the structural response has been considereda mean one, obtained through an average over the acquired locations.
4. Concluding remarks
In this work the scaling laws for the response of an elastic thin plate excited by a steady turbulent boundary layer arederived. These laws are based on both a pure dimensional analysis and an energy response formulation. Simple analyticalexpressions for the dimensionless curves are provided and more important, the proposed scaling laws are used forrepresenting a quite large amount of experimental data.
These experimental data set involves four types of plates in air and in water flow, excited by a turbulent boundary layer,thus representing a severe test data set.
With this data, it is shown, that all the presented experimental measurements collapse very close one to each otheraccording with the dimensionless functions selected for the power spectral densities of the structural displacements. Then,the proposed representations could be usefully utilized to perform preliminary predictive steps. In fact, it has beendemonstrated that it is possible to obtain an estimate of the power spectral densities of the displacement response in thewhole frequency range, starting from the desired test conditions i.e. material properties, geometrical characteristics andflow velocities, from the knowledge of the boundary layer thickness and of the friction velocity necessary to define thepressure power spectral density.
In this regard, it has been shown that both the relations obtained using dimensional analysis (Eq. (14)) as well as energyresponse formulation (Eq. (19)) produce a quite good collapse of all data sets. On the other hand, Eq. (19) describes thedependence between non-dimensional frequency and non-dimensional acceleration response with one simple expressionvalid in the whole frequency range providing a very quick estimate of the structural response. Notwithstanding, the use ofEq. (14) should be preferred for all cases where damping value is not easy to be identified for example when theconsidered panel is a section of a real and complex structure (ship, airplane, etc.).
At this stage, the main aim has been to test the possibility to get a universal representation of the response able toinclude the fluid-structure coupling in all frequency and wavenumber ranges. It is evident that many other points remainto be investigated in order to widen the significance of the representation and thus to extend the proposed dimensionlessforms to a more complicated structural components.
References
Abraham, B.M., 1998. Direct measurements of the turbulent boundary layer wall pressure wavenumber-frequency spectra. Journal of Fluids Engineering120, 29–39.
Buckingham, E., 1914. On physically similar systems; illustrations of the use of dimensional equations. Physical Review 4, 345–376.Bull, M.K., 1996. Wall pressure fluctuations beneath turbulent boundary layers: some reflections on forty years of research. Journal of Sound and
Vibration 190, 299–315.Chase, D.M., 1980. Modelling the wavevector-frequency spectrum of turbulent boundary layer wall pressure. Journal of Sound and Vibration 70, 29–67.Choi, H., Moin, P., 1990. On the space-time characteristics of wall pressure fluctuations. Physics of Fluids A 2, 1450–1460.Ciappi, E., Magionesi, F., De Rosa, S., Franco, F., 2009. Hydrodynamic and hydroelastic analyses of a plate excited by the turbulent boundary layer. Journal
of Fluids and Structures 25, 321–342.Corcos, G.M., 1964. The structure of the turbulent pressure field in boundary-layer flows. Journal of Fluid Mechanics 18, 353–379.Cremer, L., Heckl, M., 1987. Structure borne sound, 2nd Ed. Springer-Verlag, ISBN: 0-387-18241-1.Davies, H.G., 1971. Sound from turbulent-boundary-layer-excited panels. Journal of the Acoustical Society of America 49, 878–889.De Rosa, S., Franco, F., 2008. Exact and numerical responses of a plate under a turbulent boundary layer excitation. Journal of Fluids and Structures 24,
212–230.Elishakoff, I., 1983. Probabilistic Methods in the Theory of Structures. John Wiley & Sons, New York.Efimtsov, B.M., 1982. Characteristics of the field of turbulent wall pressure fluctuations at large Reynolds numbers. Soviet Phisics—Acoustics 28, 289–292.Finnveden, S., Birgersson, F., Ross, U., Kremer, T., 2005. A model for wall pressure correlation for prediction of turbulence-induced vibration. Journal of
Fluids and Structures 20, 1127–1143.Goody, M., 2004. Empirical spectral model of surface pressure fluctuations. AIAA Journal 42, 1788–1794.Graff, K.F., 1991. Wave motion in elastic solids. Dover Publications, New York.Graham, W.R., 1997. A comparison of models for the wavenumber frequency spectrum of turbulent boundary layer pressures. Journal of Sound and
Vibration 206, 541–565.Hambric, S.A., Hwang, Y.F., Bonness, W.K., 2004. Vibrations of plates with clamped and free edges excited by low-speed turbulent boundary layer flow.
Journal of Fluids and Structures 19, 93–110.
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–103102
Hong, C., Shin, K.K., 2010. Modelling of wall pressure fluctuations for finite element structural analysis. Journal of Sound and Vibration 329, 1673–1685.Ichchou, M.N., Hiverniau, B., Troclet, B., 2009. Equivalent ‘rain on the roof ’ loads for random spatially correlated excitations in the mid frequency range.
Journal of Sound and Vibration 322, 926–940.Keith, W.L., Hurdis, D.A., Abraham, B.M., 1992. A comparison of turbulent boundary layer wall-pressure spectra. Journal of Fluids Engineering 114,
338–347.Lee, Y.T., Blake, W.K., Farabee, T.M., 2005. Modeling of wall pressure fluctuations based on time mean flow field. Journal of Fluids Engineering 127,
233–240.Lyon, R.H., De Jong, R.G., 1995. Theory and Application of Statistical Energy Analysis. Butterworth-Heinemann, London.Magionesi, F., Ciappi, E., 2010a. Characterisation of the response of a curved elastic shell to turbulent boundary layer. In: Proceedings of the Seventh
International Symposium on Fluid–Structure Interactions, Flow–Sound Interactions, and Flow-Induced Vibration & Noise, Montreal, Canada.Magionesi, F., Ciappi, E., 2010b. Experimental investigation of turbulent boundary layer excitation acting on the sonar dome. In: Proceedings Internoise
2010, Lisbon, Portugal.Peltier, L.J., Hambric, S.A., 2007. Estimating turbulent-boundary-layer wall-pressure spectra from CFD RANS solutions. Journal of Fluids and Structures 23,
920–937.Schlichting, H., 1978. Boundary Layer Theory. McGraw-Hill, New York.Totaro, N., Robert, G., Guyader, J.L., 2008. Frequency averaged injected power under boundary layer excitation: an experimental validation. Acta Acustica
94, 534–547.Totaro, N., 2004. Caracterisation de Sources Aerodynamiques et Sous-structuration Pour la Method SEA. Ph.D. Thesis, INSA, Lyon, France, 04 ISAL 010.
E. Ciappi et al. / Journal of Fluids and Structures 32 (2012) 90–103 103