www.twrs.comToll Free: 800.621.2777Email: [email protected]
TANK
PRESSURE
INLET
PRESSURE
BLAST
PRESSURE
ACCUSTRIP SYSTEMHOSE ASSEMBLIES, 11SX PARTS
MODEL DESCRIPTION PART NO.
BLAST HOSE Complete blast hose assemblies include base blast hose with nozzle holder and coupling, water line andASSEMBLIES deadman control lines with deadman valve pre-assembled. Will connect to any SX model Accustrip System.
11SX 5/8" blast hose assemblies have ¾" nozzle holder threads and are recommended for use with #3 and #4size nozzles.
Blast hose assembly 5/8" x 25'. For model 11SX with standard pneumatic controls.
12SX or 13SX 1" blast hose assemblies have 50mm nozzle holder threads and are recommended for use with #6 and #8 size nozzles. 1¼" blast hose assemblies have 50mm nozzle holder threads and are recommendedfor use with #8 and #10 nozzles.
12SX Blast hose assembly 1" x 25'. Standard pneumatic controls.
12SX or 13SX Blast hose assembly 1" x 50'. Standard pneumatic controls.
Blast hose assembly 1¼" x 50'. Standard pneumatic controls.
EXTENSION Complete extension blast hose assemblies include base blast hose with couplings, water line and deadmanBLAST HOSE control lines pre-assembled. Will connect to any SX model Accustrip System and any SX type blast hoseASSEMBLIES assembly. Blast hose extension assemblies fit between the blast hose assembly (harness) and the SX model
Accustrip System, to extend the reach of the nozzle from the Accustrip System® (blast pot).
12SX or 13SX Extension blast hose assembly 1" x 25'. Standard pneumatic controls.
Extension blast hose assembly 1" x 50'. Standard pneumatic controls.
Extension blast hose assembly 1¼" x 50'. Standard pneumatic controls.
8710-22117
8710-70125
8710-70100
8710-70101
8710-80126
8710-90028
8710-90023
Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com
8710-40007A: Pressure gauge, 0-160 psi
8710-17024: Wheel 11SX
8710-22104: Axle spacer 11SX8710-98695: Axle 11SX
8710-22110: Ball valve 3/8"
4244-502-02: Branch tee ¼" FNPT x ¼" flare
4203-502-02: Fitting ¼" MNPT x ¼" flare 90o
8710-92302: Drain cock 1/8"
8710-95331: Inlet air valve/choke valve 11SX
7019-511: Nut ½" -13 nylon insert
4102-006: Hose 1" red (per foot)
(left to right)7030-001: Label tag inlet pressure7030-002: Label tag tank pressure7030-003: Label tag blast pressure
4214-108-01: Hose coupling 1½" FNPT
4209-105: Crowfoot, 2-lug, ¾"
2302-205-50: Air filter 11SX
8710-98660: Blast pressure regulator 11SX
8710-98661: Moisture eliminator 11SX
11SX Parts, 1.0 cu. ft. Vessel with ¾" Piping
www.twrs.comToll Free: 800.621.2777Email: [email protected]
8710-22100: Pop-up head 11SX, 12SX, 13SX
8710-22102: Pop-up gasket 11SX, 12SX, 13SX
8710-22103: Pop-up guide 11SX
8710-24120: Screen 11SX, 12SX
8710-24121: Lid 11SX, 12SX
2014-300: Breather Vent 1/8"
8710-80246: Pop-up stem 11SX, 12SX, 13SX
4202-500-00: Straight swival 1/8" m x 1/8" f
8710-92301: Clamp8710-98503: Clamp O-ring
8710-95330: Hose barb ¾" MNPT x 1" hose
4205-106: Swival insert 1" w/ Gasket4205-106-99: Gasket
8710-92031: Clamp 1" hose
(Not Shown)8710-98306: Decal large ARMEX8710-98307: Decal small ARMEX7031-007: Decal depressurize warning7031-008: Decal grounding warning
8710-98507: Finishing plug 3/4”
8710-98632: Screen hardware
8710-98662: Media flow control valve 3/4” 11SX
8710-98663: Automatic air valve ¾"11SX
8710-36101: Media shut-off valve 1¼" BSPT 11SX8710-98502: Clamp fitting 11/4”MNPT
ACCUSTRIP SYSTEM11SX PARTS
8710-92031: Clamp 1" hose
8710-95331: Inlet air valve/choke valve 11SX
11SX Accustrip System® Parts, 1.0 cu. ft. Vessel with ¾" Piping
Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com
8710-22115: Media valve 11SX (optional)
Thompson Valve II
8710-98503: Clamp, O-ring8710-92301: Clamp
4203-502-02: Fitting ¼" MNPT x ¼" flare 90o
www.twrs.comToll Free: 800.621.2777Email: [email protected]
Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com
ACCUSTRIP SYSTEM12SX PARTS
4201-502-02: Straight swival ¼" m x ¼" f
2401-508: Ball valve
2302-208-50: Air filter 12SX, 13SX
8710-40007A: Pressure gauge, 0-160 psi
4211-108: Crowfoot, 4-Lug, 1½"
4205-108: Hose barb 1½" MNPT x 1½" hose
8710-36100: Media flow cntrl valve
8710-34100: Auto air valve 1½"
8710-98501: Clamp fitting 1½" FNPT
4203-502-02: Fitting ¼" MNPT x ¼" flare 90º
8710-98508: Clamp fitting 1½" hose
2014-300: Breather Vent 1/8"
4201-500-00: Straight swival 1/8" m x 1/8" f
7032-005: Handle grips
7031-008: Decal grounding warning
7030-001: Label tag inlet pressure
8710-98578: Filter 2 micron ¼" male
7031-007A: Decal depressurize warning
12SX Accustrip System® Parts, 2.0 cu. ft. Vessel with 1½" Piping
8710-98307: Decal small ARMEX
8710-36101: Media shut-off valve
8710-92301: Clamp8710-98503: Clamp O-ring
4228-509: Hose clamp 1½"
4102-008: Hose 1½" red (per foot)
4228-509: Hose clamp 1½"
4203-502-02: Fitting ¼" MNPT x ¼" flare 90º
8710-92301: Clamp8710-98503: Clamp, O-RingThompson Valve II
8710-98503: Clamp O-ring8710-92301: Clamp
8710-31000: Media valve (optional)
8710-98502: Clamp ftg1¼"MNPT
4203-502-02: Fitting ¼" MNPT x ¼" flare 90º
www.twrs.comToll Free: 800.621.2777Email: [email protected]
Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com
(left to right)7030-002: Label tank pressure7030-000: Label differential pressure7030-003: Label blast pressure
4214-108-01: Hose coupling 1½" FNPT
8710-98562: Moisture eliminator 12SX
8710-92302: Drain cock 1/8"
8400-100-40: Pressure gauge console
8710-36003: Bypass/vent/water valve 7040-107: Axle 12SX7019-519: Nut ¾" -10 nylon insert
8710-22100: Pop-up head 11SX, 12SX, 13SX
8710-22102: Pop-up gasket 11SX, 12SX, 13SX
8710-22101: Pop-up guide assembly
8710-80246: Pop-up stem 11SX, 12SX, 13SX
8710-24120: Screen 11SX, 12SX
8710-24121: Lid 11SX, 12SX
8710-98307: Decal small ARMEX
8710-98632: Screen hardware
7046-003: Wheel 12SX
ACCUSTRIP SYSTEM12SX PARTS
12SX Accustrip System® Parts, 2.0 cu. ft. Vessel with 1½" Piping
8710-36003: Bypass/vent/water valve
4259-304-05: Male garden hose connection
2401-508: Ball valve 12SX, 13SX
2000-007: Regulator assy 12SX,13SX
8710-40007A: Pressure gauge, 0-160 psi2010-013: Differential pressure gauge
8710-40007A: Pressure gauge, 0-160 psi
8710-36003: Bypass/vent/water valve
4203-502-02: Fitting ¼" MNPT x ¼" flare 90º
8710-98578: Filter 2 micron ¼" male
8710-80145: Quick disconnect ¼" MNPT body
4227-305-99: Garden hose washer4227-304-05: Female garden hose connection
2300-004-02: Y strainer
www.twrs.comToll Free: 800.621.2777Email: [email protected]
Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com
ACCUSTRIP SYSTEM13SX PARTS
4203-502-02: Fitting ¼" MNPT x ¼" flare 90º
2401-508: Ball valve 12SX, 13SX
2302-208-50: Air filter 12SX, 13SX
8710-40007A: Pressure gauge, 0-160 psi
4211-108: Crowfoot, 4-Lug, 1½"
4205-108: Hose barb 1½" MNPT x 1½" hose
8710-36100: Media flow cntrl valve 12SX,13SX
8710-34100: Auto air valve 1½"12SX,13SX
8710-98501: Clamp fitting 1½" FNPT
4203-502-02: Fitting ¼" MNPT x ¼" flare 90º
8710-98508: Clamp fitting 1½" hose
2014-300: Breather Vent 1/8"
4201-500-00: Fitting 1/8" MNPT x 1/8" flare straight
7031-008: Decal grounding warning7030-001: Label tag inlet pressure
8710-98578: Filter 2 micron ¼" male
4201-502-02: Straight swival¼" x ¼" f
13SX Accustrip System® Parts, 3.0 cu. ft. Vessel with 1½" Piping
8710-98307: Decal small ARMEX
8710-36101: Media shut-off valve
8710-92301: Clamp8710-98503: Clamp O-ring
4102-008: Hose 1½" red (per foot)
4228-509: Hose clamp 1½"
4203-502-02: Fitting ¼" MNPT x ¼" flare 90º
7031-008: Decal grounding warning
8710-92301: Clamp8710-98503: Clamp, O-Ring
Thompson Valve II
8710-98503: Clamp O-ring8710-92301: Clamp
8710-98502: Clamp fitting1¼"MNPT
8710-31000: Media valve (optional)
4228-509: Hose clamp 1½"
www.twrs.comToll Free: 800.621.2777Email: [email protected]
Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com
(left to right)7030-002: Label tank pressure7030-000: Label differential pressure7030-003: Label blast pressure
4214-108-01: Hose coupling 1½" FNPT
8710-98561: Moisture eliminator 13SX
8710-92302: Drain cock 1/8"
8400-100-40: Pressure gauge console
8710-36003: Bypass/vent/water valve 8400-100-42: Axle 13SX7019-519: Nut ¾" -10 nylon insert
8710-22100: Pop-up head 11SX, 12SX, 13SX
8710-22102: Pop-up gasket 11SX, 12SX, 13SX
8710-22101: Pop-up guide assembly
8710-80246: Pop-up stem 11SX, 12SX, 13SX
8710-98630: Screen 13SX
8710-98631: Lid 13SX
8710-98632: Screen hardware
7046-006: Wheel 13SX
ACCUSTRIP SYSTEM13SX PARTS
13SX Accustrip System® Parts, 3.0 cu. ft. Vessel with 1½" Piping
8710-36003: Bypass/vent/water valve
4259-304-05: Garden hose connection, 1/2” M x 3/4” M
2401-508: Ball valve 12SX, 13SX
2000-007: Regulator assy 12SX,13SX
8710-40007A: Pressure gauge, 0-160 psi2010-013: Differential pressure gauge
8710-40007A: Pressure gauge, 0-160 psi
8710-36003: Bypass/vent/water valve
8710-98578: Filter 2 micron ¼" male
8710-80145: Quick disconnect ¼" MNPT body
4227-305-99: Garden hose gasket4227-304-05: Female garden hose connection
1/2” x 3/4”2300-004-02: Y strainer
www.twrs.comToll Free: 800.621.2777Email: [email protected]
Axxiom Manufacturing Co., Inc. • 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com
ACCUSTRIP SYSTEM PNEUMATICCONTROL VALVE ASSEMBLY
Standard Pneumatic Control Valve Assembly—Thompson Valve® II
2229-000: Control valve8710-96001: Quick disconnect ¼" MNPT plug
4101-002: Hose ¼" black (per foot)
8710-96100: Quick disconnect ¼" MNPT body
4203-500-02: Fitting 1/8" MNPT x ¼" flare 90º
2013-402: Dust eliminator
8710-80145: Quick disconnect ¼" MNPT body
4203-502-02: Fitting ¼" MNPT x ¼" flare 90º
4101-002: Hose ¼" black (per foot)
4200-302-00: Hose barb 1/8" MNPT x ¼" push on
4200-302-00: Hose barb 1/8" MNPT x ¼" push on
4200-302-00: Hose barb 1/8" MNPT x ¼" push on
1/8" MNPT to auto air valve
¼" MNPT to inlet air
3
2
1
Standard Pneumatic ControlValve Assembly—Media Valve
2013-402: Dust eliminator ¼" MNPT
2229-002: 4-way pneumatic control valve (no fittings)
8710-96001: Quick disconnect ¼" MNPT plug
8710-96103: Quick disconnect ¼" MNPT body
4101-002: Hose ¼" black (per foot)
8710-96100: Quick disconnect ¼" MNPT body
4203-500-02: Fitting 1/8" MNPT x ¼" flare 90º
2013-402: Dust eliminator
8710-80145: Quick disconnect ¼" MNPT body
4203-502-02: Fitting ¼" MNPT x ¼" flare 90º
4101-002: Hose ¼" black (per foot)
4200-302-00: Hose barb 1/8" MNPT x ¼" push on
4200-302-00: Hose barb 1/8" MNPT x ¼" push on
4200-302-00: Hose barb 1/8" MNPT x ¼" push on
1/8" MNPT to auto air valve
¼" MNPT to inlet air
www.twrs.comToll Free: 800.621.2777Email: [email protected]
Axxiom Manufacturing Co., Inc.• 800-231-2085 • fax 888-600-3300 • www.AxxiomMfg.com
ACCUSTRIP SYSTEM MEDIA VALVE PARTS
Media Valve
8710-22112: Media valve pipe 11SX8710-98683: Media valve pipe 12SX,13SX
8710-36003: Bypass valve
3006-104: Street elbow ½" galv
3029-104-09: Nipple ½" x 2" galv
8710-98681: Body media valve
8710-92301: Clamp
8710-98503: Clamp gasket
8710-98682: Media valve orifice sleeve
8710-98534: Media valve orifice sleeve O-ring
8710-98535: Media valve actuator O-ring
8710-98559: Piston media valve
8710-98536: Media valve piston O-ring
8710-98548: Media valve wrist pin
8710-98541: Media valve actuator
8710-98537: Media valve actuator bolts
4203-500-00: Fitting 1/8" MNPT x 1/8" flare 90º
See detail below
4200-302-00: Hose barb 1/8" MNPT x ¼" push on hose
4100-002: Hose ¼" black push on
4200-302-02: Hose barb ¼" MNPT x ¼" push on hose
8710-96102: Q.D. ¼" FNPT plug close media valve8710-96101: Q.D. ¼" FNPT plug open media valve
8710-98638: Media valve open hose assembly (port 4) 8710-98637: Media valve close hose assembly (port 2)
MODEL DESCRIPTION PART NO.
MEDIA VALVE 11SX - complete media valve assembly.12SX or 13SX - complete media valve assembly.
REBUILD KIT Media valve rebuild kit (items in bold). Includes clamp gasket, O-rings, actuator bolts and wrist pin.
8710-221158710-31000
8710-31100
www.twrs.comToll Free: 800.621.2777Email: [email protected]