Download - Accessory Catalog 2011
-
Industrial Solutions
www.wagner-group.com
J. Wagner GmbHIndustrial SolutionsD-88677 Markdorf
Tel. +49 (0) 75 44/5 05-0Fax +49 (0) 75 44/5 05-200
Industrial Solutions
ACC
ESSO
RY
CATA
LOG 2
011 /
2012 | Li
quid
Applica
tions
A C C E S S O R Y C A T A L O G 2 0 1 1 / 2 0 1 2Liquid Appl icat ions
Printed in Germany - Item no. 2305877 - 01/2011 - Subject to change without notice. Not responsible for errors and misprints. Illustrations may vary from scope of delivery. Our General Terms and Conditions apply. All rights reserved.
-
WAGNER Industrial Solutions
WAGNER QuAlityWe globally develop, produce and distribute innovative products and solutions based on trendsetting technolo-gies that meet the highest quality standards. WAGNER offers maximum quality, reliability and cost effectiveness.
WAGNER DEvElopmENt CENtERFrom the initial idea to series production, this highly advanced development center sets new standards in the development of products and solutions for the surface fin-ishing industry. In addition, it is here that compliance with all national and international standards and regulations is guaranteed in the course of product development.
WAGNER tEChNoloGy CENtERWAGNER offer its customers an unique technology center with floor space of 1,400 m for liquid and powder coat-ing, located at the company headquarters in Markdorf. In rooms equipped with the latest technology, our custom-ers are able to coat their products with liquid or powder materials under real production conditions. On the basis of insights gained during these trials, efficient system concepts are developed and implemented in cooperation with our experts.
WAGNER - perfect Surfaces for industry
WAGNER is the market leading manufacturer of high tech systems and components for the application of paints and powders to
surfaces. We are one of only a few suppliers to offer the full spectrum of products and technologies needed throughout the entire
process chain from material feeding and mixing to transporting and controlling and, finally, to application of the material on
the surface. Efficient use of resources, maximum quality and economy is what we stand for in everything we do.
WAGNER SERviCEAlways close to you - the WAGNER Service network. WAGNER provides its customers with worldwide service. At our bases you will always find the right contact for all technical queries. Regular maintenance of your equipment will ensure for high process safety and reliability. The latest developments and updates could be very advantageous for your processes. We are glad to pass this knowledge on to you. Either during maintenance work after all we are on your premises anyway - or you can make use of our training offers!
WAGNER DiStRibutioN SuppoRtBecome a WAGNER distributor today. We offer a broad sales support by our highly qualified employees as well as by offering a wide range of material, tools and documents.
Examples:
product and accessory catalogs
price lists
brochures, poster etc.
user manuals
InfoNet - the WAGNER IS information portal
WAGNER distributor shop
mARkEt-lEADiNG mANufACtuRERWAGNER Industrial Solutions is, as a part of the WAGNER Group, the market leader in manufacturing technologically advanced systems and plants for surface coating using liquid, powder, paints and fluid media. What do delicate writing tools, TVs, mobile phones, laptops, refrigerators and kitchens, control cabinets, wheel rims, cars, yachts and cranes all have in common? Of course: an innovative coa-ting technology for high quality surfaces that is integrated in the industrial production process.
Around 1,400 employees around the world work to ensure the high standards of WAGNER coating technology. The spectrum ranges from material feeding, mixing and dosing equipment, and motion and control engineering to the surface application of powder and liquid coating, paints, oils and waxes, etc. Booths and recovery equip-ment for powder coating as well as adhesive and label-ling equipment round out the product portfolio, which is geared toward efficiency and process reliability, as well as user-friendliness and environmental compatibility.
iNNovAtivE CoAtiNG tEChNoloGiESThe appearance and function of a products surface struc-ture is critical to its value. And it is what our our develop-ment engineers focus on: we work to enhance your pro-ducts. At our development centre in Switzerland, we have a successful think tank and set the benchmark in many sectors worldwide. For example, we are regarded as the pioneers in electrostatic powder coating of large work-pieces and are leaders in high technology applications. Always in focus: simple handling combined with high efficiency and the best possible environmental protection according to VOC regulations.
WAGNER also excels in surface coating with liquid media, such as with innovations like the extremely long-lived Unica double diaphragm pump, the new ergonomic AirCoat guns and the first 4K paint system in Germany. Aside from new developments, the continuous improvement of well-proven technologies is an important aspect of our research and development work. The company offers its customers around the world test systems equipped with various tech-nologies that provide a wide range of testing opportunities.
An experienced team of application technicians performs test runs in which various coatings are tested under produc-tion conditions and the best solution is ultimately imple-mented. Thanks to its global service network and innovative products, the WAGNER group is among the top providers in the coating sector.
WAGNER ADvANtAGESHigh quality products Professional system consultation for optimal coating solutions for your workpieceInnovative developments Efficient support and service High performance and efficiency worldwideISO 9001 certified
-
Page 1Accessory Catalog 2011
Content
Material Supply P. 9
Material Processing P. 79
Gun Accessories P. 127
Electrical Equipment
Tools, Lubricants & PSE
Pump Stands, Trolleys and Wall BracketsSystem Racks Material ContainersElevator SystemsSuction SystemsAgitatorsMaterial Filters & Recircula tion
P. 10 P. 16 P. 27 P. 34 P. 42 P. 53P. 66
Material HeatersMaterial ManometersMaterial Pressure RegulatorsMaterial Valves
P. 80 P. 85 P. 88 P. 98
Material HosesMaterial Fittings
P. 104P. 114
Air Regulators Air Filter / Air Dryer Valves and Manifolds Air Pressure Gauges Air Hoses Fittings / Connection Elements SupraCoat Piping System
Cables, Plugs und Connecting Elements
Tools Lubricants & Release Agents PSE (Personal Safety Equipment)
Material Hoses & Fittings P. 103
Gun Flushing Systems P. 128
Air Supply
Material
Supp
lyMaterial
Processin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 2 Accessory Catalog 2011
Material Supply
Content | Accessories 2011
Material Hoses & Fittings
Material Containers
Containers Container Control Systems
P. 29 P. 31
Suction Systems
Rigid Pipes & Flexible Hoses Suction System Components
P. 45 P. 49
Agitators
Pneumatic Agitators Electric agitators
P. 56 P. 58
Material Processing
Material Filters & Recirculation
Material FiltersFilter InsertsRecirculation Systems
P. 69 P. 74 P. 77
Material Heaters
HSA Thermo-System
P. 82 P. 84
Material Manometers
Material Manometers P. 86
Material Pressure Regulators
Pressure RegulatorsBackpressure RegulatorsHigh Flow Regulators
P. 91 P. 96 P. 97
Material Valves
Material Valves P. 100
Material Hoses
High Pressure HosesLow Pressure HosesElectrostatic Hoses
P. 106 P. 110 P. 112
Material Fittings
High Pressure FittingsLow Pressure Fittings
P. 117 P. 123
Pumpengestelle, Wagen und Wandhalterungen
Pump Stands, Trolleys Wall Brackets
P. 12 P. 14
Elevator Systems
Elevators Drum Covers
P. 36 P. 39
System Rack 1 System Rack 2
P. 18 P. 19
System Racks
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 3Accessory Catalog 2011
Electrical Equipment
Gun Accessories
Airspray Gun Accessories
Airspray Gun Accessories
Air Pressure Gauges
Air Pressure Gauges
Air Fittings
Air Fittings
SupraCoat Piping System
SupraCoat Piping System
Cable, Plugs & Connecting Elements
Cable Plugs Connections
Tools, Lubricants & PSE
Tools, Lubricants, Release Agents & PSE
Tools Lubricants & Release Agents PSE
AirCoat Gun Accessories
AirCoat Gun Accessories
Automatic Gun Accessories
Automatic Gun Accessories
Gun Flushing Systems
Gun flushing Systems P. 129
Airless Gun Accessories
Airless Gun Accessories
Air Valves & Manifolds
Air Valves & Manifolds
Air Hoses
Air Hoses
Air Supply
Air Regulators
Air Regulators
Air Filters / Dryers
Air Filters / Dryers
Material
Supp
lyMaterial
Processin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 4 Accessory Catalog 2011
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
Preface 3rd edition
The third edition of the accessory catalog provides a new structure for an improved usabi-lity. The individual chapters offer a precise classification. In addition to that, each chapter includes detailed basic information, details to the relevant products and selection tables at the beginning. The new catalog includes the chapter color change valves, our successful valves which guarantee unique precision and reliability of all our systems.
Due to the electronically generation process of this catalog, we apologize for any mistakes that might occur within the document. Please send us your information on these mistakes on the catalog for further improvement. The positive reactions of the past and your remarks already show a huge interest in the catalog and we look forward to any new comments. This will help us to develop the next catalog in even better quality.
Wagner Product Management
Markus NeundorfPhone: +49 (0)7544 505 1636e-mail: [email protected]
-
Page 5Accessory Catalog 2011
Material
Supp
lyMaterial
Processin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 6 Accessory Catalog 2011
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
Example for the selection of accessory parts for a paint-kitchen in a heavy-duty rack copmplete with air supply, tank, level-scales, drum-cover elevator with drum cover, suction system and agitator. All WAGNER accessories are system components and fit together perfectly.
The complete rack assembly consists of the basic rack (1) and - due to customers demand - air supply system (2), drop trays (3), level-scales (4) and wall bracket (5). The air supply system can be equipped with different air inlets and outlets with or w/o shut-off valves for supply of pumps, elevators or agitators. Several racks can easily be combined with each other.
1
2
3
4
5
Example Paint Supply
-
Page 7Accessory Catalog 2011
Material
Supp
lyMaterial
Processin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
100 l container (6) for e.g. component B made from stainless steel with openable lid. For a 200 l drum a drum cover elevator (7) is requested which consists of the elevator itself, the control panel and drum positioner. Differently designed drumcovers (8) are already equipped with the bushings for suction system (9) and agitator (10). All components fit together perfectly and are interchangeable at will.
6
7
8
9
10
-
Page 8 Accessory Catalog 2011
Notes
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 9Accessory Catalog 2011
Material SupplyAccessories and components for professional paint supply
installations from the suction up to the feeding pump
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
Pump Stands, Trolleys & Wall Brackets 10PageMaterial SupplySystem Racks 16PageMaterial SupplyMaterial Containers 27PageMaterial SupplyElevator Systems & Drum Covers 34PageMaterial SupplySuction Systems 42PageMaterial SupplyAgitators 53PageMaterial SupplyMaterial Filters & Recircula tion 66PageMaterial Supply
-
Page 10 Accessory Catalog 2011
Material Supply
Pump Stands, Trolleys and Wall BracketsStands, trolleys and brackets for any WAGNER pump or pressure pot for the mobile use and easy transportation and installation. Special versions of the wall brackets allow rotated mounting of the pump.M
aterial SupplyMaterial Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSEHighly exible and mobile with air-tyres
Safe stand by stabile design
Robust pump mounting beams
Heavy duty steal construction
Highly exible and mobile with air-tyres
Safe stand by stabile design
Robust pump mounting beams
Heavy duty steal construction
-
Page 11Accessory Catalog 2011
Material Supply
Selection table for pump stands, trolleys and wall brackets
Select the required stand, trolley or wall bracket for your pump.
Pumps:
Article numbers: Wall bracket Stand Stand 4-Leg TrolleyTrolley
Heavy Duty
High pressure piston pumps EvoMotion
EvoMotion 20-30S T760.00M T760.00S T760.00SR T6196.00 -
EvoMotion 40-15S T760.00M T760.00S T760.00SR T6196.00 -
EvoMotion 31-40S T760.00M T760.00S T760.00SR - -
EvoMotion 37-65S T6144.00 - - - T6090.00C
EvoMotion 24-100S T6144.00 - - - T6090.00C
High pressure piston pumps Icebreaker
Wildcat 18-40 367020 367021 367023 367121 -
Wildcat 10-70 367020 367021 367023 367121 -
Puma 28-40 367020 367021 367023 367121 -
Puma 15-70 367020 367021 - 367121 -
Puma 15-150 367020 367021 - 367121 -
Leopard 35-70 368020 367021 - 367121 369024
Leopard 35-150 368020 - - - 369024
Leopard 48-110 368020 - - - 369024
Leopard 18-300 368020 - - - 369024
Jaguar 75-150 369020 - - - 369024
Jaguar 38-300 369020 - - - 369024
Tiger 72-300 369020 - - - 369024
Low pressure piston pumps
Puma 8-300 367020 - - - 369024
Puma 3-600 367020 - - - 369024
Leopard 8-600 368020 - - - 369024
Leopard 4-1200 368020 - - - 369024
Jaguar 9-1200 369020 - - - 369024
EvoMotion 5-60S T760.00M T760.00S T760.00SR - -
EvoMotion 5-235S T760.00M - - - T6079.00A
High pressure diaphragm pumps
Cobra 40-10 367020 322052 367121 - -
Cobra 40-25 367020 322052 367121 - -
Low pressure diaphragm pumps
ZIP 52 Finishing T760.00M T760.00S T760.00SR T6196.00 -
ZIP 52 T760.00M T760.00S T760.00SR T6196.00 -
ZIP 52 perfect ow T760.00M T760.00S T760.00SR T6196.00 -
Unica 4:1 T6151.00 T6148.00 - - -
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 12 Accessory Catalog 2011
Material Supply
4-leg stand
PRODUCT DESCRIPTION
Description Item no.
Stand Unica 4-270 T6148.00Stand Wildcat/Puma 4-leg 367023
Stand and wheel kit
PRODUCT DESCRIPTION
Description Item no.
Stand WildCat/Puma 367021Stand Leopard 368021Stand Zip/Evomotion T760.00STrolley Zip/Evomotion T760.00SRTrolley Wildcat/Puma 367121Trolley Leopard 368121Wheelkit for 367021&368021 367022Stand Cobra 322052Wheel / Handle kit for T760.00S T760.00R
4-leg stand for small ichebreaker pumps. Ideal with use of rigid suction pipe.
Universal pump stand for WAGNER Icebreaker pumps. The stands 367021 and 368021 can be upgraded to a trolley by use of the wheel kit.
lightweight and stable
mobile and solide stand
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 13Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Item no.
Trolley heavy duty Leopard/Jaguar 369024Trolley heavy duty Colora pumps T6090.00CTrolley heavy duty Colora pumps T6079.00A4-wheel-trolley EvoMotion T6196.00
PRODUCT DESCRIPTION
Description Item no.
Trolley MDG 12/24 V4310240000Trolley MDG 22 V4310220000Trolley MDG 45/60 V4310450000
Heavy duty trolley for big WAGNER pistonpumps. Extremely stable and robust for use under rough conditions.
Trolley for pressure pots MGD.
Trolley
MDG-Trolley
heavy duty
trolley for pressure pot
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 14 Accessory Catalog 2011
Material Supply
Wall bracket
PRODUCT DESCRIPTION
Description G H O P S Item no.mm mm mm mm mm
Wall bracket Wildcat/Puma/Cobra 182 80 107 175 149 367020Wall bracket for Leopard 230 110 129 238 167 368020Wall bracket for Jaguar/Tiger 230 110 135 238 271 369020Wall bracket rotatable for Leopard 230 110 129 238 167 368030Wall bracket angle Icebreaker 300 306 356 369023
ADDITIONAL INFORMATION
Wall brackets for direct wall mounting or installation in WAGNER system racks. Special versi-ons allow 90 rotaded mounting of the pump.
for Icebreaker and Cobra pumps
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 15Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description G H O P S Item no.mm mm mm mm mm
Wall bracket Zip52/80 bare pump 189 19 T600.573Wall bracket Unica 4:1 360 162 98 T6151.00Wall bracket EM31-40/Zip52 finish 158 189 19 80 14 T760.00MWall bracket EM37-65/24-150 387 T6144.00
ADDITIONAL INFORMATION
Wall brackets for direct wall mounting or installation in WAGNER system racks.
Wall bracketfor EvoMotion, ZIP and Unica pumps
Distance G of wall bracket T600.573 between 155 mm and 174 mm
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 16 Accessory Catalog 2011
Material Supply
System RacksWAGNER pump racks are the base for comprehensive material supply units. The systems are extendable at will. No matter if only a small pump unit with a hobbock and suction or a complete industrial paint kitchen with pumps, air supply, containers, lifts, level control,... WAGNER sytem racks always offer the ideal solution. For special requests or sizes directly contact your local sales organisation.
Heavy duty steel grids for safe stand of containers and drums. Stand for drum cover elevators integrated.
Tidy and clear by use of cable channels for electrical
installations.
Stable and robust installation panel
Extremely stable and long lasting by use of fully welded zinc-plated steel construction.
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 17Accessory Catalog 2011
Material Supply
System RacksSYSTEM 1: WHG COMPLIANT
SYSTEM 2: MODULAR AND FLEXIBLE
SYSTEM 3: HEAVY DUTY
LEVEL SCALES
WHG-compliant rack for installation of smaller pumps or as standa-lone storage hub for containers up to 250 L. Fully zinc-plated steel design.
Extremely flexible rack-system made from zinc plated steel for smaller and middlesize pumps (max. installation-weight: 75 kg). All components are mounted by screws and extendable at will. Ship-ping size is compact, racks are assembled directly on site. Air supply system and wheels are available optionally. Not prepared for use of drum cover lifts or integrated level scales.
Designed for all kind of pumps and containers up to 250 L. Comple-tely equipped with grids and ground protection assy. Fully welded 50 mm square shaped steel beams make the racks extremely robust. Different accessories such as air supply, trays and level indication units are available as option. The system is prepared to house any WAGNER pump, container, lift, and all other neccessary equipment such as controls, valves, filters or regulators to setup a complete material supply unit due to individual needs. The racks can easily be combined with each other for even bigger systems. For safe stand the racks can be directly anchored on the floor.
Single rack for drums or containers with integrated weighing system and pneumatic warning signal for level control.
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 18 Accessory Catalog 2011
Material Supply
WHG-compliant rack
PRODUCT DESCRIPTION
Description Length A D E H Item no.mm mm mm mm
Rack S1 Basic-WHG 1300x940 1300 940 335 AE400009089Rack S1 installation panel 660 660 1853 AE400009088Rack S1 installation panel 1300 1300 1853 AE400009087
Fully zinc-plated and WHG-compliant steel rack for storing of containers up to 250 L volume. The optional installation panel allow mounting of pumps (40 kg max.) or elevators for small supply systems
System 1 Rack
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 19Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Length A B C H Item no.mm mm mm mm
Rack S2 basic module 900 800 105 1520 T600.946Rack S2 extension module 900 800 105 1520 T600.946ARack S2 side module 750 55 105 1520 T600.968C-rail sliding block M8 (10pcs) 105 1520 K076.00
ADDITIONAL INFORMATION
Flexible and modular system rack made from zinc plated steel for mid-size pumps (installation weight 75 kg. max.) All components are screwed and upgradeable at will.
Modular pump rackSystem 2 Rack
Including zinc-plated steel grid and tray, 10 pcs. of C-rail sliding blocks M8.Possibility to install air supply manifolds on top with air shut-off valves for each pump or other devices (e.g. agitators)
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 20 Accessory Catalog 2011
Material Supply
Guide pulleys
PRODUCT DESCRIPTION
Description Height Item no.mm
Rack S2 set of wheels 97 T600.949Rack S2 set of wheels with break 97 T600.949A
Air supply
PRODUCT DESCRIPTION
Description Air inlet connection Air outlet connection Item no.
Rack S2 air supply D32 base module 1" / DN25 hose 2 x G1/2" T600.634Rack S2 air supply D32 extension cpl. 2 x G1/2" T600.635
Guided pulleys for System 2 Racks are available with or w/o break.
T600.634 (base module) contains main air supply with ball valve and 1" hose connection plus 2 air outlets (1/2") with ball valves. T600.635 (extension module) contains connection to the base module plus 2 air outlets (1/2") with ball valves (no main supply)
System 2 Rack
System 2 Rack
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 21Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Air outlet connection Item no.
Rack S2 air valve 1/2" G1/2" T600.948Rack S2 air valve2 1/4" G1/4" T600.948A
Additional outlet valves for air supply. Complete with ball valve. Before installation a hole must be drilled into the air pipe.
Air supply connectionsSystem 2 Rack
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 22 Accessory Catalog 2011
Material Supply
Heavy duty pump rack
PRODUCT DESCRIPTION
Description Length A B C Type Item no.mm mm mm
Rack S3-30/60L-A560mm 560 450 A 2304159Rack S3-200L-A760mm 760 650 A 2304160Rack S3-30/60L-A1015mm 1015 450 450 B 2304136Rack S3-200L-A1215mm 1215 650 650 B 2304135Rack S3-30/60L-A1980mm 1980 450 450 C 2304132Rack S3-200L-A2380mm 2380 650 450 C 2304134
ADDITIONAL INFORMATION
Designed for all kind of pumps and containers up to 250 L. Completely equipped with grids and ground protection assy. Fully welded 50 mm square shaped steel beams make the racks extremely robust. Different accessories such as air supply, trays and level indication units are available as option. The system is prepared to house any WAGNER pump, container, lift, and all other necessary equipment such as controls, valves, filters or regulators to setup a complete material supply unit due to individual needs. The racks can easily be combined with each other for even bigger systems. For safe stand they can be directly anchored on the floor.
System 3 Rack
Dmm 1100mmEmm 1800mmFmm 1135mmGmm 325mmHmm 150mm
TECHNICAL DATA
Fully equipped WAGNER Heavy Duty double pump rack:Consists of the rack (1) including grids (2) which are already equipped with the holders fr drum cover elevators as well as for level indication spring kits. Stainless steel trays under the grids. The complete air sup-ply system (3) with valve controlled inlets and outlets and the 2 sets of level indication spring kits (7) complete the setup of this rack.
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 23Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Length Total capacity Item no.mm l
Rack S3 Drop tray 560 440 18 2303996Rack S3 Drop tray 760 640 27 2303993Rack S3 Drop tray-1015/1980 895 37 2303995Rack S3 Drop tray-1215/2380 1095 46 2303994
PRODUCT DESCRIPTION
Description Item no.
Level-scale spring kit 3208212
Fully welded stainless steel trays. Easy to remove and clean. Positioned underneath the rack.
For minimum level indication. Adjustable for all containers and drums up to 250 L. Easy to be installed in the pump racks grid. For functional description see "Level-scales"
Heightmm 40mmWidthmm 1055mm
Drip tray
TECHNICAL DATA
Level scales
System 3 Rack
System 3 Rack
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 24 Accessory Catalog 2011
Material Supply
Air supply
PRODUCT DESCRIPTION
Description Length Item no.mm
Air supply kit basic 2304098Air supply pipe D50-1015 1015 2304168Air supply pipe D50-1215 1215 2304170Air supply pipe D50-1980 1980 2304178Air supply pipe D50-2380 2380 2304181Air supply pipe D50 cpl. 2500 3209601
ADDITIONAL INFORMATION
The air supply system is based on a 50 mm Aluminium profil-tube which can be equipped with all connections needed for the paint supply unit. First select the right length fitting to your rack. Then make your choice of the connections needed to supply pumps, elevators, agitators or pressure switches. A manometer set makes it easy to have an eye on the right air pressure in the system.Additional connections or manometers can be easily added. See also chapter "air supply" under SupraCoat accessories.
System 3 Rack
The basic air supply system consists of a 3/4" air hose connec-tion with shut-off valve plus three G1/2outlet connections
The kit 3209601consists of a 2,5 m D50 aluminium air pipe complete with covers & clamps, manometer, 1" air supply with ball valve, 2 air outlets for 8/6 mm hose with ball valve.Connections can be freely positioned by drilling the holes whereever requested. For special demands contact your local sales organisation.
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 25Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Air outlet connection Valve Item no.mm
Air inlet D50 1""-valve 1" 50 mit Ventil 3208033Air inlet D50 3/4"-w/o valve 3/4" 50 ohne Ventil 2303976Air inlet D50 1/2"" w/o valve 1/2" 50 ohne Ventil 2303977Air inlet D50 1/2""-valve 1/2" 50 mit Ventil 3208085Air inlet D50 10/8mm-valve 10/8mm 50 mit Ventil 3208036Air inlet D50 8/6mm-valve 8/6mm 50 mit Ventil 3208037
PRODUCT DESCRIPTION
Description Item no.mm
Manometer D50 kit 50 3208035
Connections for the air supply of System Rack 3. The pipe has to be drilled, the air supply equipment can easily be slipped on the pipe. Fixing & sealing by screws and O-rings.
Manometer fr Air-Supply system "comfort".
Air supply connections
Manometer
System 3 Rack
System 3 Rack
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 26 Accessory Catalog 2011
Material Supply
Level scales
PRODUCT DESCRIPTION
Description Length A B C Item no.mm mm mm
Level-scale 400x400 cpl. 400 490 80 3207739Level-scale 600x600 cpl. 600 690 80 3208783Level-scale 800x800 cpl. 800 890 80 3207740
Indicators for level scales
PRODUCT DESCRIPTION
Description Length Hose Air inlet connection Color Item no.mm mm mm
Optical indicator blue R 1/8" Blue 9943034Optical indicator yellow R 1/8" Yellow 9943033Optical indicator green R 1/8" Green 9943032Optical indicator red R 1/8" Red 9943031External signalhorn kit 160 71 4 2312343
Purpose of the level-scale is to alarm low level in order to shut down or refill drums or contai-ners before they run completely empty.It works quite simple by use of two adjustable spring-packs. They lift the grillage when the weight of the drum reaches an adjustable minimum value and the pneumatic switch is acti-vated. Total movement of the unit is just a few millimeters.
Available in 3 sizes for 30, 60 and 200 L drums and containers.Also suitable for pressure pots e.g. MDGs and LDGs.
Signal horn for acoustic alarm when minimum level in the container is undercut. Noise level can be adjusted by help of the check-valve.
Optical indicators offer a visible signal occurring above 1,5 bar air pressure to monitor e.g. low level or proper system condition. Visible angle 180. Front mounted, installation hole 22,5 mm.
acoustic and visual
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 27Accessory Catalog 2011
Material Supply
Material ContainersMaterial containers for paint supply and storage. Containers are available in different versions and sizes. For sensitive fluids such as isocya nate hardeners hermtically sealed containers are offered. Air drying equipment or nitrogene supply can be selected optionally. For special requests or special dimensions please contact your WAGNER sales organisation.
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
Robust stainless steel body stained and passivated or polished depending on the selected version.
Material savings by inclined bottom and drain connection.
Seperate
Easy installation by pre-mounted connections
Standard version with operable lid. Material protection by use of hermetical sealed cover version.
Level indication (optional)
-
Page 28 Accessory Catalog 2011
Material Supply
Material ContainersSTAINLESS STEEL CONTAINERS
NITROGENE CONTROL SYSTEM
SILIKAGEL-FILTER
Stainless steel containers with openable lid or hermetically sealed cover for material supply units or paint storage. They are equipped with a bottom outlet connection and possibility to install e.g. recir-culation and agitators. Two different designs are available:
Standard stainless steel tanks with inclined bottom
Polished stainless steel tanks with central bottom drainage
If other specifications are requested please contact your local sales organisation.
Provides controlled inert gas (nitrogen) supply pressure to hermeti-cally sealed tanks in order to inhibit hydro-reactive material from crystallization. E.g. catalysts for two-components polyurethane products with a high content of isocyanates. The system gives acou stic alarm when nitrogen gas pressure runs out. System safety is guaranteed by overpressure block device, monitoring necessary intervention.
Silicagel absorbs air-humidity by means of its hygroscopic property. Used whenever moisture sensitive material is stored or processed in hermetic atmosphere in order to dry the air before exposing to the material.
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 29Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Length A E Total capacity Folding cover Item no.mm mm l
FB50L-open tank 700 400 50 Yes 3206491FB100L-open tank 723 500 100 Yes 3208615FB250L-open tank 980 625 250 Yes 3209094FBH50L-hermetic tank 700 400 50 No 2305051FBH100L-hermetic tank 723 500 100 No 2304296FBH250L- hermetic tank 980 625 250 No 3209097
Stainless steel container, stained and passivated, openable or hermetically sealed for paint supply and storage. Equipped with in- and outlet connections for e.g. material, circulation, measurement equipment or agitator. Inclined bottom with material outlet.
Connection F G 1" MConnection G G 1/2" FConnection H G 3/8" FConnection J 34.5 mmz
Stainless steel container, stained and passivated
TECHNICAL DATA
openable or hermtically sealed
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 30 Accessory Catalog 2011
Material Supply
Stainless steel container, polished
PRODUCT DESCRIPTION
Description Length A E Connection F Total capacity Folding cover Item no.mm mm l
FBP50L-open tank 930 300 G 1/2" M 50 Yes RG42.050SFBP100L-open tank 1030 400 G 1" M 100 Yes RG42.100SFBP200L-open tank 1230 500 G 1" M 200 Yes RG42.200SFBP300L-open tank 1230 650 G 1" M 300 Yes RG42.300SFBP 50L-tank with agitator 930 300 G 1/2" M 50 Yes RG52.050SACMFBP 100L-tank with agitator 1030 400 G 1" M 100 Yes RG52.100SACMFBP 200L-tank with agitator 1230 500 G 1" M 200 No RG52.200SACMFBP 300L-tank with agitator 1230 650 G 1" M 300 Yes RG52.300SACMFBPH30L-hermetic tank 670 300 G 1/2" M 30 No RG41.030EFBPH50L-hermetic tank 950 300 G 1/2" M 50 No RG41.050EFBPH100L-hermetic tank 1050 400 G 1" M 100 No RG41.100EFBPH200L-hermetic tank 1250 500 G 1" M 200 No RG41.200EFBPH300L-hermetic tank 1250 650 G 1" M 300 No RG41.300E
Level Control
PRODUCT DESCRIPTION
Description Max. operating pressure Item no.mm bar
Min. level control basic 30 3 U931.00Min. level control-guided 30 3 U931.00A
Lightweight containers, stainless steel, polished surface. With openable lid for paint supply and storage. Equipped with in- and outlet connections for e.g. material, circulation, measu-rement equipment or agitator. Additional drain connection at the conical bottom.
Minimum level control with acoustic signal-horn. Suitable for insulated electrostatic applications.Wetted parts stainless steel, rope length w/o limitation If mounted in agitated tanks the guided version U931.00A is needed.
openable or hermtically sealed
buoyancy type, pneumatic
Connection G G 1/2" MConnection H G 3/8" F
TECHNICAL DATA
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 31Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Item no.
Nitrogen Control System-basic U930.00NNitrogen Control System-FBHP300 U930.00NCNitrogen Control System-FBHP50 U930.00NCANitrogen pressure reducer 3201953
ADDITIONAL INFORMATION
Provides controlled inert gas (nitrogen) supply pressure to hermetically sealed tanks in order to inhibit hydro-reactive material from crystallization. E.g. catalysts for two-components poly-urethane products with a high content of isocyanates. The system gives acoustic alarm when nitrogen gas pressure runs out. System safety is guaranteed by overpressure block device, monitoring necessary intervention.1st stage pressure regulator (to be mounted on the Nitrogene container) NOT included.
Nitrogen outlet connection G 1/4"IMax. nitrogen inlet pressurebar 4barMin. air inlet mm 4mmMax. control air pressurebar 6barNitrogen inlet mm 6mm
Nitrogene Control System
TECHNICAL DATA
indication of pressure loss
Installation-sceme for nitrogene control
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 32 Accessory Catalog 2011
Material Supply
Air-Dryer
PRODUCT DESCRIPTION
Description Air inlet connection Air outlet connection Item no.
Silicagel-Filter cpl. G 1/4"F G 1/4"F 3208084Pre-Filter G 1/4"F G 1/4"F 3204421Silicagel-Filter G 1/4"F G 1/4"F 3204170Wall bracket 3204781Recharge granulate 3204420Silica gel filter T034.00KSilicagel-Filter direct mounted T034.00Recharge package Silica-Gel Z114.00C
ADDITIONAL INFORMATION
Silikagel absorbs humidity due to ist hygroscopic behaviour. Suitable to dry air before expo-sing to hydro reactive material in hermetically sealed containers.
Silikagel-Filter
Silikagel-Filter 3208084 complertely pre-assembled including wall bracket.
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 33Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Material Number of pieces Item no.
Inliner LDG5 PP-5pcs Polypropylene 5 V4300050000Inliner LDG10 PP-5pcs Polypropylene 5 V4300100000Inliner MDG12 galv. steel Galvanised steel 1 V4300120002Inliner MDG22 galv. steel Galvanised steel 1 V4300220002Inliner MDG24 galv. steel Galvanised steel 1 V4300240002Inliner MDG45 galv. steel Galvanised steel 1 V4300450002Inliner MDG60 galv. steel Galvanised steel 1 V4300600002Inliner MDG90 galv. steel Galvanised steel 1 V4300900002Inliner LDG5 stainless steel Stainless steel 1 V4300050013Inliner LDG10 stainless steel Stainless steel 1 V4300100013Inliner LDG20 stainless steel Stainless steel 1 V4300200013Inliner MDG12 stainless steel Stainless steel 1 V4300120003Inliner MDG22 stainless steel Stainless steel 1 V4300220003Inliner MDG24 stainless steel Stainless steel 1 V4300240003Inliner MDG45 stainless steel Stainless steel 1 V4300450003Inliner MDG60 stainless steel Stainless steel 1 V4300600003Inliner MDG90 stainless steel Stainless steel 1 V4300900003
Inline containers for pressure pots keep the pot body clean and are easy to change-either for reloading or cleaning purpose.
Inlinersfor pressure pots LDG and MDG
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 34 Accessory Catalog 2011
Material Supply
Elevator Systems and drum coversElevator equipment available for standard 30 L hobbocks or 200 L drums. With the smart range of interchangeable components it`s easy to make the right selection for the individually designed paint supply system due to customers special demand.
WAGNER drum cover elevators perfectly fit into Pump Racks System 1 & 3. They are especially designed for use in professional material supply installations: Non rotatable for precise positioning and extremely robust. For safety reasons they are completely "finger-safe" and in case of a sudden pressure loss (broken hose) the elevator slowly moves back in the down positon by means of adjustable throttle valves. The elevators can be equipped with different operation panels: Single up/down control by a 3/5 way valve with reject spring (dead-man-switch) or additionally with agitator control for pneumatic or electric agitators. Agitator control also contains the safety switch which allows agitator operation in down position of the elevator only. Additional agitator air supply regulator is available as an option.
Elevator control panel with spring-rejected switch for your safety.
Adjustable air supply for e.g. pneumatic agitators.
Extremely robust cylinder
Limit stop for precise drum positioning
Various installtions by use of dierent holders and drum covers.
Automatic agitator-stop when lifting the drum cover. For saftey reasons the agitator must be switched on after lowering the cover in working position.
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 35Accessory Catalog 2011
Material Supply
Elevator Systems and drum coversELEVATOR SYSTEMS AND DRUM COVERSThe complete elevator unit consist of the basic elevator depending on the size of the used container, the drum cover holder and the drum cover depending on the version with or w/o openable lid or inspection hole, suction and agitator connection. Other connections such as level controls or circulation are selectable. The drum posi tioner helps to locate he drum precisely under the elevator. The elevator control must be selected depending on the agitator type electrical or pneumatic. For heavy agitator the drum cover reinfor cement plate is strongly recommended.The agitator control is equipped with automatic shut-off when the cover starts to lift. For the user safety the agitator does not automa tically restart when the drum cover is back in work position. It must be consciously restarted. The air supply gives the possibility to precisely adjust the air pressure for the agitator.
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
Drum positioner
Drum coverreinforcing
Drum cover e.g. 365-B
Holder bar
Elevator e.g. PE550 Basic
Control panel
Air regulator
-
Page 36 Accessory Catalog 2011
Material Supply
Drum Cover Elevator
PRODUCT DESCRIPTION
Description A min A max C Max. stroke Max. weight Item no.mm mm mm mm kg
PE 550 Basic RAL9006 496 706 967 610 50 PE050000001PE 700 basic RAL9006 565 775 1144 730 75 PE070000001PE 1000 Basic RAL9006 776 986 1444 1041 75 PE100000001
ADDITIONAL INFORMATION
WAGNER drum cover elevators are basically equipped with air-cylinder, traverse, vertical holder bar and throttle valves for 8 mm hose. Due to the requested container size holder bar and drum cover have to be selected separately. Different pre-assembled control panels can easily be mounted either directly or beside the elevator. The elevator base plate can be directly bolted to the ground floor or on the System 1 or System 3 racks.
Basic unit
Dimensions of elevator and base plate
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 37Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Controller Item no.
PE Single elevator control Lift/lower AE400008001PE Pneum-agitator control Lift/lower, with pneumatic agitator control AE400008021PE Electric-agitator control Lift/lower, with electric agitator control AE400008061PHV air regulator AE400008040
Dependung on the version consisting of: - mounting plate- up/down control 3/5 way valve for elevator, spring-rejected.- on/off control switch for pneumatic or electric agitator. - end-stroke sensor to enable the agitator operating only if elevator is in down position.
Completely pre-assembled. Easy to install directly at the elevator.
In order to meet ATEX compliancy together with electric agitator an additional NAMUR relays station with galvanic isolation is requested.
Control Panelfor drum cover elevators
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 38 Accessory Catalog 2011
Material Supply
Holder Bar
PRODUCT DESCRIPTION
Description D min D max G Item no.mm mm mm
PE Holder-bar 630 530 569 420 PE100099300PE Holder-bar 460 359 389 330 PE070099300PE Holder-bar 365 299 329 300 PE050099300
ADDITIONAL INFORMATION
Drum Positioner
PRODUCT DESCRIPTION
Description Item no.
PE Positioner 30/60L-drum PE050099200PE Positioner 200L-drum PE100099200
Drum cover holder bars for different cover diameters
for precise positioning of the drum underneath the elevator after drum-change.
for drum covers
for drum cover elevators
Material Galvanised steel
TECHNICAL DATA
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 39Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Type A D Folding cover Item no.mm mm
Drumcover 365-A A 365 Yes 2304618Drumcover 365-B B 365 100 No 2304620Drumcover 365-C C 365 No 2304622Drumcover 365-D D 365 Yes 2304464Drumcover 365-E E 365 No 2304439Drumcover 630-A A 630 Yes 2304623Drumcover 630-B B 630 120 No 2304624Drumcover 630-C C 630 No 2304625Drumcover 630-D D 630 Yes 2304471Drumcover 630-E E 630 No 2304448
ADDITIONAL INFORMATION
Drum covers are available in two different diameters suitable for 30 L hobbocks ( 365 mm) and 200 L drums ( 630 mm). They are equipped with different bushings for suction pipe, agitator, recirculation, and other equipment. All connections fit perfectly to the WAGNER accessories range such as suction pipes, recirculation hoses or the wide range of agitators. All connectors can be easily plugged if not needed. Versions with hinged flap or inspection hole allow easy visible process inspection or refilling. For special customer layouts the drum covers are also available unmachined. Ask your local WAGNER sales organisation for any special demand
Bmm 28.5 Cmm 34.5Connection F G 3/8" FConnection G G 1/2" FConnection H G 3/8" F
Drum Cover
TECHNICAL DATA
stainless steel
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 40 Accessory Catalog 2011
Material Supply
Accessories
PRODUCT DESCRIPTION
Description Material Min. material thickness Item no.mm
RW-cover reinforcement Stainless steel 3 2304688Plug for agitator PHT 2304953
ADDITIONAL INFORMATION
Drum Cover Assemblies
PRODUCT DESCRIPTION
Description Item no.
Drum cover assembly cpl. 001 2305522
Drum cover reinforcement for 630mm drum cover. Made from 3 mm stainless steel. Strongly recommended if additional equipment such as agitators are used. The plastic plug closes the agitator hole if no agitator is used. It is made from a polyester elastomer which is suitable for almost every fluid used in the painting industry.
Drum cover set completely equipped with suction pipe, pneumatic 300W-agitator for 30 Liter hobbocks. Consits of: 1. Drum Cover with inspektion hole (Art. Nr. 230 4618) 2. pneumatic agitator 300 W incl. propeller 95 mm (Art. Nr. 2304533) 3. suction pipe (Art. Nr. 2304550) 4. suction filter M28x1,5 MW0,8 (Art. Nr. 250245)
for drum covers
completely equipped
Plug for agitator borehole in lid if no agitator is in use. The polyester-elastomer plug is resistent to most solvents.
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 41Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Min. weight Max. weight Item no.kg kg
Man. pump lift wall monted 30kg 15 30 367035Man. pump lift wall mounted 40kg 30 40 368036Man. pump lift trolley 30 kg 15 30 367031Man. pump lift trolley 40 kg 30 40 368032
PRODUCT DESCRIPTION
Description Air inlet connection Max. weight Item no.kg
Lifting trolley pneum. (G1) 850N G 1" 85 369033Pneum. pump lift trolley 40 kg G 1" 55 369032Pneum. pump lift trolley 30 kg G 1/2" 40 367032Pneum. pump lift wall monted 30kg G 1/2" 40 367036Pneum. pump lift wall mounted 40kg G 1" 55 369036
Pumps equipped with rigid suction pipe can be completely mounted on a pump elevator. The complete equipment can be elevated in order to interchange hobbocks or other smaller containers when empty. Pump elevators are pneumatic agitated or manually. They can either be mounted directly on wall or integrated in Heavy duty Pump Racks System 3. Also available on cart for mobile application. Setup of pumps in pump elevators help to keep the expend of solvents small when flushing the system.
Pumps equipped with rigid suction pipe can be completely mounted on a pump elevator. The complete equipment can be elevated in order to interchange hobbocks or other smaller containers when empty. Pump elevators are pneumatic agitated or manually. They can either be mounted directly on wall or integrated in Heavy duty Pump Racks System 3. Also available on cart for mobile application. Setup of pumps in pump elevators help to keep the expend of solvents small when flushing the system.
A minmm 734mmA maxmm 1234mm
A minmm 734mmA maxmm 1172mm
Pump Elevator
TECHNICAL DATA
Pump Elevator
TECHNICAL DATA
manual
pneumatic
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 42 Accessory Catalog 2011
Material Supply
Suction SystemsSuction systems can be classified in three ranges: Ridgid suction systems in stainless steel or HDPE (high density polyethylene) Suction hoses with stainless steel pipes and high resistant flexible hoses Suction pipes and hoses for WAGNER drum covers / drums in pump rack installations
How to select the right suction system: Check the pump intake connection select the type of suction system select the suction size/diamenter
Note: For middle and higher viscose paints DN25 (1") diameter is recommended. For low viscose material also DN13/16 (1/2") suctions sys-tems are available. Make sure that the level difference between suction and pump intake is as small as possible and avoid un-necessary long hose-length.
Unique, rotatable pump connection.
Stainless steel suction pipe
Stainless steel suction lters available in various mesh-sizes.
Vakuum resistant suction hose with high solvent resistance.
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 43Accessory Catalog 2011
Pump
Connection tting
Rigid suction pipes
Suction lter
Flex. suction hose without elbow
Flex. suction hose with elbow and lter
Suction hose extension
Suction pipe for container and drums
Suction lter
Elbow
Hopper
Bung-hole adaptor
Material Supply
Suction Systems
EXAMPLES OF INTALLATIONS
SUCTION SYSTEMS FOR THE ENTIRE RANGE OF INSTALLATIONSDepending on the requested suction system the following components are available:
- Rigid suction pipes: Suitable when the pump is directly mounted above the container either in a stand or a pump elevator. This is the shortest suction method offering the smallest waste of material and flushing.- Flexible suction hoses for hobbocks up to 40 cm height: This system offers a high flexibility to position the container beside the pump. Easy to change from e.g. paint to flushing fluid.- For complex suction systems WAGNER offers a wide range of pipes, elbows, suction filters and hose extensions in different sizes and dimensions. - WAGNER hoppers are connected directly to the pump open the highest level of flexibility and independence. - WAGNER suction systems are despite few exceptions uniquely based on the M36x2 threaded connection.
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 44 Accessory Catalog 2011
Material Supply
Suction System Selection TableSelect the appropriate section pipe or suction hole using the connection of your pump.
Pump Connection threadM=male threadF=female thread
Overview pump connections:
Cobra 10-40 M36x2 M
Cobra 25-40 M36x2 M
Wildcat 18-40 M36x2 M
Wildcat 10-70 M36x2 M
Puma 28-40 M36x2 M
Puma 15-70 M36x2 M
Puma 15-150 M36x2 M
Leopard 35-70 M36x2 M
Leopard 35-150 M36x2 M
Leopard 48-110 M36x2 M
Leopard 18-300 M36x2 M
Jaguar 75-150 M36x2 M
Jaguar 38-300 M36x2 M
Tiger 72-300 M36x2 M
Puma 8-300 M36x2 M
Puma 3-600 M36x2 M
Leopard 8-600 M36x2 M
Leopard 4-1200 M36x2 M
Jaguar 9-1200 M36x2 M
Evomotion 14-15S G1/2 F
Evomotion 40-15S G1/2 F
Evomotion 20-30/S G1/2 F
Evomotion 20-60 G1/2 F
Evomotion 31-40S G1/2 F
Evomotion 37-65S G1 F
Evomotion 24-100S G1 F
Evomotion 5-60S G3/4 F
Evomotion 5-235S G1 F
ZIP 52 Finishing G1/2 F
ZIP 52 G1/2 F
ZIP 52 perfect ow G1/2 F
ZIP 80 G3/4 F
ZIP 182 G1 F
Unica 4:1 G3/4 F
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 45Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Connection thread Pipe length Inside Mesh width Filter connection Item no.mm mm m
G 3/4" M 365 25.4mm 800 M 28x1.5 367151G 1" M 365 25.4mm 800 M 28x1.5 368151G1 1/2" M 475 38mm 1250 G 1 1/2" 369151G1 1/2" M 270 38mm 1250 G 1 1/2" 370151G 1/2" M 255 14mm 1500 pluged strainer T4016.00MG 1/2" M 280 14mm 1500 pluged strainer T4016.00I
PRODUCT DESCRIPTION
Pipe length Inside Filter connection Mesh width Mounting type Item no.mm mm m270 25.4 M 28x1.5 800 streight 105930415 25.4 M 28x1.5 800 streight 105931345 25.4 M 28x1.5 800 streight 367986400 25.4 M 28x1.5 1000 bended 90 341263438 16 G 1/2" 800 bended 90 2311832
Ridgid stainless steel suction pipes for piston pumps to be directly screwed into the bottom pump inlet. The suction system is equipped completely with a stonecatcher (filter). For 100 % sealness connection must be gued with e.g. Loctite
Ridgid stainless steel suction pipes for piston pumps which are already equipped with an M36x2 fitting. By means of the M36 cap-nut the connection is safely seal and removable anytime for e.g. cleaning purpose. The suction pipe is equipped completely with a stonecat-cher (filter).
Material Stainless steelIncl. filter YesMounting type streight
Connection thread M 36x2 FMaterial Stainless steelIncl. filter Yes
Rigid Suction Pipes
TECHNICAL DATA
Rigid Suction Pipes
TECHNICAL DATA
BSP - male thread
M36x2 cap-nut
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 46 Accessory Catalog 2011
Material Supply
Rigid Suction Pipes
PRODUCT DESCRIPTION
Description Pipe length Inside Item no.mm mm
HDPE-suction pipe-M36x2-273-cpl. 273 18 115065HDPE-suction pipe-M36x2-318-cpl. 318 18 115376HDPE-suction pipe-M36x2-338-cpl. 338 18 115283HDPE-suction pipe-M36x2-350-cpl. 350 18 367150HDPE-suction pipe-M36x2-413-cpl. 413 18 115266HDPE-suction pipe-M36x2-683-cpl. 683 18 115063HDPE-suction pipe-M36x2-728-cpl. 728 18 115282HDPE-suction pipe-M36x2-803-cpl. 803 18 115265
Ridgid HDPE suction pipes for piston pumps which are already equipped with an M36x2 fitting. The suction pipes are completely equipped with filter element. The high density poly-ethylene material is resistant against almost all chemicals. Spare Filter: Art. Np.115190Caution: The HDPE suction pipes are NON ATEX compliant!
M36x2 female thread
Connection thread M 36x2 FMaterial HDPEIncl. filter YesFilter connection M 20x1.5Filter connection thread type FMesh width m 400
TECHNICAL DATA
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 47Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Connection thread Inside Filter connection Mesh width Mounting type Item no.mm m
G 1/2" M 16 pluged strainer 1500 streight T4016.00ZG 1/2" M 16 pluged strainer 1500 streight T4016.00ZIG 3/4" M 19 pluged strainer 1500 elbow 90 T4016.00WIG 3/4" M 25 pluged strainer 1500 elbow 90 T4021.00IG 1/2" M 25 pluged strainer 1500 elbow 90 T4016.00EG 1/2" M 25 M 28x1.5 800 elbow 90 T4017.00G 1" M 25 M 28x1.5 800 elbow 90 T4018.00G 1" M 25 M 28x1.5 800 elbow 90 T4018.00IG 1/2" M 25 M 28x1.5 800 elbow 90 T4018.00AG 1/2" M 16 pluged strainer 1500 elbow 90 T4016.00EI
ADDITIONAL INFORMATION
Flexibler suction hose with BSP-female thread incl. suction filter. Material: Steel or stainless steel and vacuum resistant EPDM-Elastomer hoses
Pipe lengthmm 480mmHose lengthm 900Material Stainless steelHose material EPDMIncl. filter Yes
Flexible Suction Hoses
TECHNICAL DATA
BSP - male thread
Versions available with and without 90 bend
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 48 Accessory Catalog 2011
Material Supply
Flexible Suction Hoses
PRODUCT DESCRIPTION
Connection thread Mounting type Hose length Hose material Inside Filter connection Incl. filter Item no.m mm
M 36x2 F streight 1000 EPDM 13 M 15x1 No 97073M 36x2 F streight 1000 EPDM 25 M 28x1.5 No 97087M 36x2 F streight 1200 PTFE 13 M 15x1 Yes 104230M 36x2 F elbow 90 1000 EPDM 25 M 28x1.5 Yes 367140G1 1/2" F streight 1500 EPDM 38 G 1 1/2" Yes 115859G1 1/2" F elbow 90 1500 EPDM 38 G 1 1/2" Yes 369959
ADDITIONAL INFORMATION
Flexible suction hose with M36x2 oder G1" cap-nut and suction filter. Stainless steel and vacuum resistant EPDM hose.
M36x2 or G1" cap-nut
Pipe lengthmm 400Material Stainless steel
TECHNICAL DATA
Versions available with and without 90 bend
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 49Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Connection thread Capacity Material Item no.liters
Hopper 5L -WildCat-Puma M 36x2 F 5 HDPE 367045Hopper 5L-Cobra M 36x2 F 5 HDPE 341267Hopper 5L Set ZIP G 1/2" F 5 HDPE 2315385Hopper black M 36x2 F 5 HDPE 340265Hopper 5L-cover - HDPE 340429Return flow pipe 5L Wildcat M 20x2 - HDPE 366290Return flow pipe assy. 5l M 20x2 - HDPE 340908Curved suction pipe assy. for hopper 5L M 36x2 F - HDPE 366950Hopper set 20l M 36x2 F 20 HDPE 2316572
ADDITIONAL INFORMATION
5-Liter hopper for direct mounting at the pump for gravimetric feeding.
Approval Atex
Hoppers
TECHNICAL DATA
for pumps
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
Set Cobra 20l
-
Page 50 Accessory Catalog 2011
Material Supply
Suction Pipe
PRODUCT DESCRIPTION
Description Mounting type Pipe length Item no.mm
Cover suction 30L DN25-M36x2-E90 bended 90 510 2304551Cover suction 200L DN25-M36x2-E90 bended 90 1020 115835Cover suction 30L DN25-M36x2-S streight 600 2304550Cover suction 200L DN25-M36x2-S streight 1020 2304549Set suction holder DN25 bunghole 2" 2315163
ADDITIONAL INFORMATION
DN25 (1") drum cover suction pipes with M36x2 hose connection. The suction pipe fit into the bushings of WAGNER drum covers and are clamped with a M6-screw. Suction filters are connected via metric M 28x1,5 therad. A variety of different suction filters can be selected at the end of this chapter.
for drums and drum covers
Connection thread M 36x2 FMaterial Steel - 1.4571Inside mm 25.4mmIncl. filter NoFilter connection M 28x1.5
TECHNICAL DATA
In case of mounting the suction pipe in a 2" bunghole the adaptor 2315163 is requested.
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 51Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Thread 2 Inside Hose length Hose material Item no.mm m
M 36x2F 13 800 EPDM 3209553M 36x2F 13 1800 EPDM 115284G 3/8"F 13 1200 PTFE 104671M 36x2F 25.4 800 EPDM 3207878M 36x2F 25.4 1000 EPDM 3205841M 36x2F 25.4 1800 EPDM 115285M 36x2F 25.4 3000 EPDM 3208859M 36x2F 25.4 800 UHMW-PE 367097M 36x2F 25.4 1000 UHMW-PE 367096M 36x2F 25.4 1800 UHMW-PE 367095
Hose extensions DN13 and DN25 with M36x2 cap nuts for suction installations in pump racks. UHMW-PE is an extremely solvent resistant material suitable for nearly all fluids.The PTFE extension is especially designed for use with pressure pots (MDGs with G3/8" con-nection) and mainly used in combination with reactive catalysts.
Thread 1 M 36x2F
Extension Hoses
TECHNICAL DATA
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 52 Accessory Catalog 2011
Material Supply
Elbows
PRODUCT DESCRIPTION
Thread 1 Thread 2 Inside Material Mounting type Item no.mm
G 1 1/2"M G 1 1/2"F 38 Stainless Steel bended 90 118232M 36x2M M 36x2F 25.4 Stainless Steel bended 90 97075
Suction Filters
PRODUCT DESCRIPTION
Description Filter connection Mesh width Material Height Item no.m mm mm
Suction filter G1/2"-MW0.8 G 1/2" 800 Steel - 1.4305 50 42 2311834Filter M15x1 M 15x1 800 Steel - 1.4305 52 40 250244FILTER M28x1,5 M 28x1.5 800 Steel - 1.4305 52 40 250245Suction filter M28x1,5 MW0,8-CS M 28x1.5 800 Steel 52 40 T4019.00Filter M28x1,5 M 28x1.5 1000 Steel - 1.4305 54 42 344341Filter M38x1,5 M 38x1.5 1000 Steell - 1.4301 54 42 341435Filter M28x1,5 M 28x1.5 1250 Steel - 1.4305 52 40 250243Suction filter G1"-MW1.25 G 1 1/2" 1250 Steell - 1.4301 62 45 115857Filter housing assy. M 20x1.5 1250 Polyamide 55 38 115190Suction hose filter pluged strainer 1500 Steel 56.5 T453.03
90-suction elbows for pumps and extension hoses
Suction filters for suction pipes and hoses with different mesh sizes and connecting threads.
for suction pipes and hoses
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 53Accessory Catalog 2011
Material Supply
AgitatorsWAGNER agitators are available with pneumatic or electric asynchronous motors. Almost all are completely ATEX compliant. The wide range of power and speed ratings, axe-length and different propellers offer agitating solutions for nearly all fluids and viscosities. The standardized interface makes it easy to mount the agitator on WAGNER drum covers, tanks and pressure pots. Standard axe-dia. makes it easy to inter-change propellers and - if necessary to cut the axe to the needed length.
Caution: Not all combinations are Atex compliant. Minimum distance between propeller and container wall or other installation pipes or parts must not be below 25 mm.
Powerful air motors or electric drives
Unique interface to the drum cover or container
High variety of dierent propellers for dierent agitation processes.
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 54 Accessory Catalog 2011
Material Supply
Agitating PropellersVERTICAL-BLADE PROPELLER
RINGPROPELLER
SLOPED-BLADE PROPELLERS
FOLDABLE PROPELLERS
Vertical propeller for universal use with axial agitating behaviour. Completely in stainless steel. For low speed agitators 500 rmp max.
Ringpropeller for universal use with axial agitating behaviour. Com-pletely in stainless steel. For high speed agitators 1.500 rmp max.
Axial steering propellers with holes for speed 300 rpm.max.
Foldable propeller for small container openings. Min. speed 150 rpm to fold up the propeller - max. speed 300 rpm.
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 55Accessory Catalog 2011
Material Supply
Selection Chart For AgitatorsSelect the suitable agitator due to the size of the container, the material characteristic and the kind of use. All Agitators fit into a 34,5 mm hole by means of a counter-nut or four orbital located screws for the bigger and more powerful units
Connection: 34,5 mm holewith counter-nut
Motor:Idle speed:Power:Propeller:
Pneumatic1.500 1/min360 W95/150 mm
Pneumatic1.500 1/min700 W140 mm
Pneumatic200 1/min360 W186 mm
Electric60 1/min120 W186 mm
Connection: 34,5 mm holewith counter-nutor orbital screws
Motor:Idle speed:Power:Propeller:
Pneumatic1.500 1/min700 W140 mm
Pneumatic1.500 1/min1200 W180 mm
Pneumatic200 1/min360 W340 mm
Electric60 1/min120 W340 mm
30 l
200 l
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 56 Accessory Catalog 2011
Material Supply
High Speed Pneumatic Agitators
PRODUCT DESCRIPTION
Agitator power Length A B Shaft of agitator blade Approval Socket dimensions Item no.kW mm mm mm mm mm0.3 80 400 9.5 95 - 34.5 Locknut 23045330.3 80 550 9.5 95 - 34.5 Locknut 23044580.7 155 400 16 140 Atex 34.5 Locknut 46322004090.7 155 800 16 140 Atex 34.5 Locknut 46322004201.2 155 800 16 180 - 34.5 Locknut 4632300420
ADDITIONAL INFORMATION
Direct driven pneumatic agitator for use with 30 L up to 200 L drums. Suitable for low viscose fluids. The air motor is directly fixed to the 34,5 mm centre-hole in the drum- or tank-cover by means of the M34 counter-nut. Agitators are completely equipped with air valve, muffler and 3 blade propeller. Version 2304458 comes with additional manometer. For mounting to the 200L drum cover the drum cover reinforcement plate 2304688 is recommended.
Connection hole 34,5mm
Rated rotational speedrpm 1500rpmMax. operating pressure 6bar
TECHNICAL DATA
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 57Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Agitator power Length A B Shaft of agitator blade Socket dimensions Item no.kW mm mm mm mm mm0.36 245 386 16 186 34.5 Locknut V44220403030.36 245 562 16 186 34.5 Locknut V44220406030.36 245 386 16 186 34.5 Locknut V44220403230.36 375 800 20 340 70 Flange V46845002030.36 375 800 20 340 70 Flange V4684500223
ADDITIONAL INFORMATION
Planet-gear driven low-speed pneumatic agitator for use with 30 L hobbocks up to 200 L drums. The air motor is directly fixed to the 34,5 mm centre-hole in the drum or tank cover by means of the M34 counter-nut. The units with 20 mm shaft have to be mounted by help of the adap-tor flange 2304353 and the drum cover reinforcement 2304688. All agitators are comple tely equipped with air valve, muffler and propeller blade. Versions V4422040323 and V4684500223 are additionally equipped with an air-oiler for increased service-life.
Rated rotational speedrpm 200rpmMax. operating pressure 6barApproval Atex
Low Speed Pneumatic Agitators
TECHNICAL DATA
Connection hole 34,5mm or Adaptor Flange
For mounting the agitators for 200 L drums with a 340 mm agitator blade, intermediate flange 2304353 is required!
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 58 Accessory Catalog 2011
Material Supply
Low Speed Electric Agitators
PRODUCT DESCRIPTION
Length A B Agitator power Socket dimensions Item no.mm mm kW mm384 337 0.12 34.5 Locknut V4422050453384 562 0.12 34.5 Locknut V4422050603
ADDITIONAL INFORMATION
Gear driven electric agitator for use with 30 L drums and small containers. The agitator is directly fixed to the 34,5 mm centre-hole in the drum or tank cover by means of the M34 flange nut. Stainless steel axe, dia. 16mm. Full ATEX compliant.The agitators are completely equipped with 186 mm 2-blade propeller (V4211501453).
Lower speed rating can be realized by means of a frequency transformer. If needed please contact your local sales organisation.
Connection hole 34,5mm
Approval AtexRated rotational speedrpm 60rpmThree-phase current connection 380V / 50HzShaft mm 16mm of agitator blademm 186mm
TECHNICAL DATA
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 59Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Length A B Agitator power Socket dimensions Item no.mm mm kW mm415 800 0.37 114.5 Flange V6100003703510 800 0.55 114.5 Flange V6100005503510 800 0.75 114.5 Flange V6100007503
ADDITIONAL INFORMATION
Gear driven electric agitator for use with 200 L drums and bigger containers. The agitator is directly fixed to the drum cover via M8 bolts & nuts. For drum cover mounting the reinforcement plate 2304688 is requested.
The agitators are completely equipped with 340 mm sloped-blade propeller.
Lower speed rating can be realized by means of a frequency transformer. If needed please contact your local sales organisation.
Approval AtexRated rotational speedrpm 98rpmThree-phase current connection 380V / 50HzShaft mm 25mm of agitator blademm 340mm
Low Speed Electric Agitators
TECHNICAL DATA
Connection orbital 114,5mm
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 60 Accessory Catalog 2011
Material Supply
Propeller
PRODUCT DESCRIPTION
Mounting type of agitator blade Max. speed Material Item no.mm rpm
sloped blade propeller 95 1500 Stainless steel E3050.03AB
Stainless steel propeller agitators with shaft dia. 9.5 mmm
Shaft dia. 9,5 mm
Shaft mm 9.5mm
TECHNICAL DATA
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 61Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Mounting type of agitator blade Max. speed Material Item no.mm rpm
sloped blade propeller 150 300 Stainless steel E3050.03CDring-propeller 70 1500 Stainless steel V4632214163ring-propeller 140 1500 Stainless steel V4632204003ring-propeller 180 1500 Stainless steel V4632318003ring-propeller 220 1500 Stainless steel V4632322003blade-propeller 60 300 Stainless steel V4211501013blade-propeller 88 300 Stainless steel V4211501043blade-propeller 156 300 Stainless steel V4211501123blade-propeller 186 300 Stainless steel V4211501453sloped blade propeller 180 300 Stainless steel V4425000053sloped blade propeller 190 300 Stainless steel V4425000043sloped blade propeller 220 300 Stainless steel V4425000063sloped blade propeller 240 300 Stainless steel V4425000013sloped blade propeller 270 300 Stainless steel V4425000023sloped blade propeller 300 300 Stainless steel V4425000033sloped blade propeller 340 300 Stainless steel V4425000003lattice-blade propeller 220 300 Aluminum V4425000011lattice-blade propeller 356 300 Aluminum V4425000001
Agitator propeller blades with shaft dia. 16 mm in stainless steel or aluminium. Select per propeller size, shape and requested speed.
Shaft mm 16mm
Propeller
TECHNICAL DATA
Shaft dia. 16 mm
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 62 Accessory Catalog 2011
Material Supply
Propeller
PRODUCT DESCRIPTION
Mounting type of agitator blade Max. speed Material Item no.mm rpm
sloped blade propeller 190 300 Stainless steel V4425000143sloped blade propeller 240 200 Stainless steel V4425000113sloped blade propeller 270 200 Stainless steel V4425000123sloped blade propeller 300 200 Stainless steel V4425000133sloped blade propeller 340 200 Stainless steel V4425000103lattice-blade propeller 220 200 Aluminum V4425000111lattice-blade propeller 356 200 Aluminum V4425000101foldable propeller 335 200 Stainless steel V6100002413
Agitator propeller blades with shaft dia. 20 mm in stainless steel or aluminium. Select per propeller size shape and requested speed. Caution: Aluminium-propellers are non-ATEX!
Shaft dia. 20 mm
Shaft mm 20mm
TECHNICAL DATA
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 63Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Mounting type of agitator blade Max. speed Material Item no.mm rpm
sloped blade propeller 270 100 Stainless steel V6127002503sloped blade propeller 300 100 Stainless steel V6130002503sloped blade propeller 340 100 Stainless steel V6134002503sloped blade propeller 390 100 Stainless steel V6139002503sloped blade propeller 440 100 Stainless steel V6144002503sloped blade propeller 600 100 Stainless steel V6160002503lattice-blade propeller 500 100 Aluminum V6101102509
Agitator propeller blades with shaft dia. 25 mm in stainless steel or aluminium. Select per propeller size shape and requested speed. Caution: Aluminium-propellers are non-ATEX!
Shaft mm 25mm
Propeller
TECHNICAL DATA
Shaft dia. 25 mm
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 64 Accessory Catalog 2011
Material Supply
Handheld Pneumatic Agitators
PRODUCT DESCRIPTION
Description Agitator power B Rated rotational speed of agitator blade Item no.kW mm rpm mm
RW-HH P300W-400 0.3 780 1500 90 RH217.575RW-HH P1000W-800-C 1 780 1500 140 RH223.555RW-HH P300W-550 0.3 420 1500 90 RH217.575A
Handheld agitators non ATEX with stainless steel axe and propeller, valve and muffler. Equip-ped with extra clamp for temporary drum mounting.
Non-ATEX
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
TECHNICAL DATA
Max. operating pressure 6 bar
-
Page 65Accessory Catalog 2011
Material Supply
PRODUCT DESCRIPTION
Description Approval Agitator power B Stand of agitator blade Item no.kW mm mm
RW-HH P100W-440 ATEX-S Atex 0.1 440 yes 100 V4650444013RW-HH P100W-550 ATEX-S Atex 0.1 550 yes 100 V4650455013RW-HH P700W-800 ATEX Atex 0.7 800 no 140 V6432200100RW-HH P700W-800 ATEX-S Atex 0.7 800 yes 140 V4632200200
ADDITIONAL INFORMATION
Handheld agitators, ATEX with stainless steel axe and propeller, valve and muffler. On stand.
Handheld Pneumatic AgitatorsATEX compliant
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
Approval AtexRated rotational speedrpm 800rpmMax. operating pressure 6 bar
TECHNICAL DATA
-
Page 66 Accessory Catalog 2011
Material Supply
Material Filters & RecirculationMaterial filters for all kind of neccessities, pressure ratings and flow volumes. They can be directly mounted at the pumps or as inline filters into the existing piping or in between hoses. Filter elements are available in stainless steel exclusively with mesh sizes of 30 mesh/cm um to 200 mesh/cm depending on the material which has to be processed.
Large-scale material lter. Easy to clean and ush for excellent service.
Solid ball valve, accessible positioned
Material circulation systems:Complete range from pressure release up to complexe circuits.
For material pressure up to 530 bar max.
Material Supply
Material Processing
Material Hoses &
FittingsGun Accessories
Air SupplyElectrical Equipm
entTools, Lubricants
& PSE
-
Page 67Accessory Catalog 2011
Material Supply
Material Filters & RecirculationMATERIAL FILTERS FOR HIGH PRESSURE PUMPS
INLINE MATERIAL FILTERS
MESH-SIZE
RECOMMENDED MESH SIZES
Various versions of release and filtering equipment available. Selec-tion follows the requested pressure rating and filter size. All versions are equipped with a high quality ball valve to depressurize the pump for easy primimng and flushing.
Inline material filters can be mounted at any position of the paint supply system. Best choice is rigth before the gun or the flowmeter. Different mesh sizes are available for different material behaviour.
The international definition of filter screens is "Mesh" = Number of meshes/ inch :Mesh = 25,4mm / (W + d) e.g.: W = 1 mm; d = 0,08mm = 141 Mesh
According to the material to be process, filters of various fineness are used. Under some circumstances, it might make sense to use a coarser filter on the pump than directly on the gun.
Material
Supp
lyMaterial
Proc
essin
gMaterial
Hoses &
Fittin
gsGu
n Acce
ssorie
sAi
r Sup
plyEle
ctrica
l Eq
uipmen
tTo
ols, L
ubric
ants
&
PSE
-
Page 68 Accessory Catalog 2011
Material Supply
Selection table for material filter, return line, and circulation
The table below is used for the selection of the appropriate filters according to the connecting dimensions of the pump used. The search for the appropriate filter insert is easy if it is geared toward the filter type printed on the individual filters.
HP-Filter
SSt- ntil
Pump outlet connection HP-Filter HP-Filter Filter-release combination
Outlet connection overview female male CS-Valve SSt-Valve
Wildcat 18-40 G3/8 1/4 NPS 367175 367178 367135
Wildcat 10-70 G3/8 1/4 NPS 367175 367178 367135
Puma 28-40 G3/8 1/4 NPS 367175 367178 367135
Puma 15-70 G3/8 1/4 NPS 367175 367178 -
Puma 15-150 G3/8 1/4 NPS 367175 367178 -
Leopard 35-70 G3/8 1/4 NPS 367175 367178 -
Leopard 35-150 G3/8 3/8 NPS 367175 367178 -
Leopard 48-110 G3/8 3/8 NPS 367175 367178 -
Leopard 18-300 G3/4 3/8 NPS 370160 370161 -
Jaguar 75-150 G3/4 3/8 NPS 367175 367178 -
Jaguar 38-300 G3/4 3/8 NPS 370160 370161 -
Tiger 72-300 G3/4 3/8 NPS 370160 370161 -
Puma 8-300 G3/4 3/8 NPS 370160 370161 -
Puma 3-600 G3/4 3/8 NPS 370160 370161 -
Leopard 8-600 G3/4 3/8 NPS 370160 370161 -
Leopard 4-1200 G1 3/8 NPS 370160 370161 -
Jaguar 9-1200 G1 3/8 NPS 370160 370161 -
Pump outlet connection APS Upgrade kit
female male carbon steel stainless steel
Evomotion 20-30S G1/4 1/4 NPS T6195.00M T6195.00Mi
Evomotion 40-15S G3/8 1/4 NPS T6195.00M T6195.00Mi