Strength. Performance. Innovation.
WILSONSTANdARd™
ThICk TURRET TOOLING SySTEM
A Cost Effective Solution for Long Lasting Durability.
March 2012
REdUCE COSTS ANd INCREASE TOOL LIFE WITh
WILSON STANdARd™.
Ultra durable and loaded with performance enhancing features, Wilson Standard
Thick Turret Tooling is an affordable solution for fabricators looking to improve
productivity and reduce tool replacement costs. Stronger tool steels, an intelligent
design and optional surface enhancements combine to make Wilson Standard the
new standard in low cost, high quality thick turret tooling.
Longer Life and Greater Precision.Wilson Standard Thick Turret Tooling is manufactured with a hardened steel guide, providing four times more grind life
than traditional old style guide assemblies. A built-in oiling system assures proper internal/external lubrication for
a consistently smooth and precise punching action.
Quick, Accurate Adjustments.Wilson Standard Thick Turret Tooling is uniquely designed to speed adjustments.
External keying allows for quick key position changes and push button punch length
adjustments eliminate the need for shims. Two-inch (C) and 3-1/2 inch (D) station
guide assemblies are keyed at 0°, 90° and 225° and keys are coated with
Wilson’s exclusive Optima® coating for superior wear resistance.
Improve Wear Resistance with Optima®.
Every Wilson Standard Thick Turret Tooling is available with Wilson’s exclusive
Optima® coating. Developed by Wilson engineers, Optima provides a surface
hardness, wear resistance and lubricity unmatched by any other coated or
uncoated turret punch press tooling. The result is a longer tool life, more hits
between sharpenings, reduced galling, better performance and less downtime.
TABLE OF CONTENTS
EXP (A & B) Tooling . . . . . . . .3-4
1/2" (A) Station Tooling . . . .6-10
1-1/4" (B) Station Tooling . .11-14
2" (C) Station Tooling . . . . . . . 15
3-1/2" (D) Station Tooling . . . . 16
4-1/2" (E) Station Tooling . . . . 17
Replaceable Insert Assembly . . 18
Close to Clamps Tooling . . . . . 19
Shear Options . . . . . . . . . . . . 20
HP Dura-Blade . . . . . . . . . . . 21
Dura-Die . . . . . . . . . . . . . . . . 22
Standard Keying Locations . . . 23
Non-Standard Keying . . . . . . . 24
Multi-Tools® For
Finn-Power® Machines . . . . . . 25
Multi-Tools® For Nisshinbo
Machines . . . . . . . . . . . . . . . 26
Accessories . . . . . . . . . . 27–36
Tools . . . . . . . . . . . . . . 27–28
Tooling Cabinet . . . . . . . . . . 29
Shear Grinding Fixture
& Accessories . . . . . . . . . . 29
Multi-Tool® Punch and
Die Holders . . . . . . . . . . . . 29
Tool Kit . . . . . . . . . . . . . . . 30
Slug Ejectors . . . . . . . . . . . 30
Center Punch . . . . . . . . . . . 30
Alignment Tools . . . . . . . . . . 31
Adapters . . . . . . . . . . . . . . 32
Ball Riding Die . . . . . . . . . . . 33
Brush Die . . . . . . . . . . . . . . 33
Punch & Die Shims . . . . . . . 34
Notcher Stripper Plate . . . . . 35
Wilson Punch & Die Grinder . . 36
Optima® coating provides:
Punch Life
Number of hits Tip Wear
Material Adhesion
The yellow area indicates actual results achieved through three tool sharpenings of .010" (0.25mm) each. The complete graph indicates projected results with a total of
.236" (6mm) removed for sharpening.
• Longer tool life
• Increased wear resistance
• More hits between sharpenings
• Reduced adhesion (galling)
• Reduced slug pulling
• Reduced corner breakdown
• Improved special tooling performance
• Lower overall tooling costs
3
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
EXP™ 1/2" (A) StAtion
Description cat. no. price
punch hoLDer • HP Round • HP Shape • HP ABS/WLS Round • HP ABS/WLS Shape • Standard Round • Standard Shape • Metric Round • Metric Shape • Metric ABS/WLS Round • Metric ABS/WLS Shape • Ultra
13974 13975
13976 13906
13977 13947
13978 13979
13980 13939
15535
Description cat. no. price
punches • Round • Shape • Optima® Add On
13904 13905
-
rounD punch Cat. No. 13904
hp rounD punch hoLDer
hp aBs/WLs rounD punch hoLDer
stanDarD shape punch hoLDer
Metric shape punch hoLDer
Metric aBs/WLs shape punch hoLDer
uLtra punch hoLDer
4
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
EXP™ 1-1/4" (B) StAtion
Description cat. no. price
punch hoLDer • HP Round • HP Shape • HP ABS/WLS Round • HP ABS/WLS Shape • Standard Round • Standard Shape • Metric Round • Metric Shape • Metric ABS/WLS Round • Metric ABS/WLS Shape • Ultra
13988 13989
13990 13918
13991 13972
13992 13993
13994 13964
15537
Description cat. no. price
punches • Round • Shape • Optima® Add On
13916 13917
-
punch shapeCat. No. 13917
hp shape punch hoLDer
hp aBs/WLs shape punch hoLDer
stanDarD shape punch hoLDer
Metric shape punch hoLDer
Metric aBs/WLs shape punch hoLDer
uLtra punch hoLDer
5
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
The Slug Pulling Solution
For a guaranteed solution to slug pulling problems that will maximize your press time and improve your productivity turn to Wilson Tool, the leading provider of tooling solutions for the punching industry. Manufacturers simply cannot afford to have their presses down for any amount of time. At Wilson Tool, our desire to provide innovative tooling solutions for our customers has lead us to develop the Slug Hugger® 2 die design to help eliminate the very costly problem of slug pulling.
The Slug Hugger® 2 design works on most material types and thicknesses including aluminum and stainless steel. Slug Hugger® 2 dies help eliminate scrapped parts, costly downtime, and possible press and tooling damage due to slug pulling.
At Wilson Tool, our Slug Hugger® 2 dies include a performance guarantee. Our unique design helps eliminate unnecessary back-pressure on small punch tips by preventing packed slugs.
how does it Work?
The Slug Hugger® 2 design grabs the slug just below the cutting surface of the die and retains the slug during the stripping process. “Precision Nips” extend the entire height of the die, helping to guide the slugs through the relief. This design doesn’t leave any marks or burrs on the finished part. The Slug Hugger® 2 “nips” hold the slugs in the die and drags it through the relief when the next hit takes place. This feature allows for less galling and slug packing when punching materials such as aluminum and galvanized steel. In addition, the effectiveness of the Slug Hugger® 2 will not be compromised when the tool is sharpened.
Our Guarantee!
Try the Slug Hugger® 2 dies to control your slug pulling. We guarantee that your slug pulling problems will be eliminated!
ELIMINATE COSTLy SLUG PULLING.
Strength. Performance. Innovation.
6
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
LocalTel: 651-286-6001Fax: 651-286-5959
PErforAtor 1/2" (A) StAtion
retaining ring(2 req'd) Cat. No. 1805
guiDeCat. No. 1886
LoWer shankCat. No. 1887
sLeeve asseMBLy.030 - .060 Dia. (0.76 - 1.52mm) Cat. No. 2029
sLeeve asseMBLy.061 - .115 Dia. (1.56 - 2.92mm) Cat. No. 2030
aDj. punch heaD With screWCat. No. 1802
punch shankCat. No. 1885
o-ringCat. No. 2282
spring retainer With o-ringCat. No. 1804
socket heaD set screW cone pt. (M6-1 x 6mm) (To be used with black oxide
adj. punch head) Cat. No. 6297
springCat. No. 1803
Maximum Material Thickness .150" (3.81mm)
punch & guiDe asseMBLy • Round
w/Slip Fit Sleeve .030-.060 Dia. (0.76-1.52mm) .061-.115 Dia. (1.56-2.92mm)
punches • Round
.030-.060 Dia. (0.76-1.52mm)
.061-.115 Dia. (1.56-2.92mm)
Dies • Positive
.037 (0.94mm) Min. Dia.
.062 (1.57mm) Min. Dia.
1888 1924
2031 2032
1808 1808
Not recommended for stainless steel.
Description cat. no. price
(up to 12.7mm)
7
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
MEtric 1/2" (A) StAtionQUIK ADjUST
1/2" (a) station add ons
Small Widths.031 - .039 (0.79 - 1.0mm)
.040 - .092 (1.01 - 2.34mm)Clearance < .004 (0.10mm)
Small Diameter.031 - .061 (0.79 - 1.56mm).062 - .092 (1.57 - 2.34mm)Clearance < .004 (0.10mm)
add ons for shapes
add ons for rounds
Additional charges apply to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Maximum Material Thickness .150" (3.81mm)
(up to 12.7mm)
notes
* Slug Hugger® dies must be ordered punch size plus clearance, .098 (2.49mm) min. dia. on rounds, .060 (1.53mm) min. width on shapes, .006 (0.15mm) min. total clearance (patented).
† 'A' Dimension = longest distance across shape.
punch & guiDe asseMBLy • Round • Shape Fitted • Optima® Add On
punches • Round • Shape • Optima® Add On
guiDes • Round • Shape (0˚) • Shape (0˚ & 45˚) • Shape (0˚ & 90˚)
stripper • Round • Shape Fitted
Dies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Slug Hugger® 2*
at 45˚ • Shape Positive • Shape Negative
13425 13427
–
2183 2182
–
13065 13066 13067 13068
13044 13143
2192 1808 12959
12960 1817 1818
Description cat. no. price
Quick aDjust spring pack asseMBLy
Cat. No. 13394
retaining ringCat. No. 24290
spring canisterCat. No. 13397
springCat. No. 24291
spring supportCat. No. 13398
punch heaDCat. No. 13395
punch heaD retainerCat. No. 13396
DoWeL pin(3/16 x .312) Cat. No. 6013
DoWeL pin (repLaceMent-rounD onLy) (3/16 x .500) Cat. No. 2131
M4x6 haLf Dog point screWCat. No. 24292
socket heaD set screW (M6 x 6mm)Cat. No. 25235
o-ringCat. No. 24345
o-ringCat. No. 971303
8
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
1/2" (A) StAtion
Maximum Material Thickness .150" (3.81mm)
stubby style 1/2" (a) station
Note: Must use stubby style die and guide with stubby style punch
punchround (.090/2.3mm max.dia.) add shape add
Die
round add shape add
1/2" (a) station add ons
Small Widths.031 - .039 (0.79 - 1.0mm)
.040 - .092 (1.01 - 2.34mm)Clearance < .004 (0.10mm)
Small Diameter.031 - .061 (0.79 - 1.56mm).062 - .092 (1.57 - 2.34mm)Clearance < .004 (0.10mm)
Punch
Stripper
StripperDie
Die
add ons for shapes
add ons for rounds
Additional charges apply to round or shape punch for extra straight before radius, extra back taper, or no back taper.
retaining ringCat. No. 1805
guiDe rounD/cLoseD rounDCat. No. 2821
guiDe shape/fitteDCat. No. 2904
DoWeL pin(3/16 x 0.312) Cat. No. 6013
DoWeL pin (repLaceMent-rounD onLy)(3/16 x .595) Cat. No. 6015
aDj. punch heaD With screWCat. No. 1802
o-ringCat. No. 2282
spring retainer With o-ringCat. No. 1804
socket heaD set screW cone pt. (M6-1 x 6mm) (To be used with black oxide
adj. punch head) Cat. No. 6297
springCat. No. 1803
(up to 12.7mm)
Use Standard Punch and Die Price Plus:
radius or 45˚ chamfer 4 corners
Total Add On
standard shapes
punches
Dies
Radius or Chamfer Size.001 - .062 (0.02 - 1.57mm).063 - .250 (1.58 - 6.35mm)
Greater than .250 (6.35mm)Any size
SD Single-D LD Long-D ET Equilateral Triangle SQ Square HX Hexagon
DD Double-D QD Quad-D OB Obround RT Rectangle OT Octagon
punch & guiDe asseMBLy • Round • Shape Fitted • Optima® Add On
punches • Round • Shape • Optima® Add On
guiDes • Round • Shape (0˚) • Shape (0˚ & 45˚) • Shape (0˚ & 90˚)
stripper • Round • Shape Fitted
Dies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Slug Hugger® 2*
at 45˚ • Shape Positive • Shape Negative
13453 13455
–
1807 1816
–
2821 2822 2903 2904
13044 13143
2192 1808
12959
12960 1817 1818
Description cat. no. price
Punch
9
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
HEAvy Duty 1/2" (A) StAtion
stubby style 1/2" (a) station
retaining ringCat. No. 1805
o-ringCat. No. 2282
spacerCat. No. 2296
Disc spring(22 Req’d) Cat. No. 2297
spring support With o-ringCat. No. 2295
Note: Must use stubby style die and guide with stubby style punch
punchround (.090/2.3mm max.dia.) add shape add
Die
round add shape add
1/2" (a) station add ons
Small Widths.031 - .039 (0.79 - 1.0mm)
.040 - .092 (1.01 - 2.34mm)Clearance < .004 (0.10mm)
Small Diameter.031 - .061 (0.79 - 1.56mm).062 - .092 (1.57 - 2.34mm)Clearance < .004 (0.10mm)
Punch
Punch
Stripper
StripperDie
Die
add ons for shapes
add ons for rounds
Additional charges apply to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Maximum Material Thickness .250" (6.35mm)
Notes:* Slug Hugger® dies must be ordered punch size plus clearance, .098 (2.49mm) min. dia. on rounds, .060 (1.53mm) min. width on shapes, .006 (0.15mm) min. total clearance (patented).• Std. keying for square guides is 0˚ & 45˚.† 'A' Dimension = longest distance across shape.
guiDe rounD/cLoseD rounDCat. No. 2821
guiDe shape/fitteDCat. No. 2904
DoWeL pin(3/16 x 0.312) Cat. No. 6013
DoWeL pin (repLaceMent-rounD onLy)(3/16 x .595) Cat. No. 6015
aDj. punch heaD With screWCat. No. 2294
socket heaD set screW cone pt.(M6-1 x 6mm) (To be used with black oxide adj. punch head) Cat. No. 6297
(up to 12.7mm)
Use Standard Punch and Die Price Plus:
punch & guiDe asseMBLy • Round • Shape Fitted • Optima® Add On
punches • Round • Shape • Optima® Add On
guiDes • Round • Shape (0˚) • Shape (0˚ & 45˚) • Shape (0˚ & 90˚)
stripper • Round • Shape Fitted
Dies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Slug Hugger® 2*
at 45˚ • Shape Positive • Shape Negative
13514 13516
–
2303 2304
–
2821 2822 2903 2904
13044 13143
2192 1808 12959
12960 1817 1818
Description cat. no. price
10
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
1/2" (A) StAtionQUIK ADjUST
Maximum Material Thickness .150" (3.81mm)
stubby style 1/2" (a) station
Note: Must use stubby style die and guide with stubby style punch
punch
round (.090/2.3mm max.dia.) add shape add
Die
round add shape add
1/2" (a) station add ons
Small Widths.031 - .039 (0.79 - 1.0mm)
.040 - .092 (1.01 - 2.34mm)Clearance < .004 (0.10mm)
Small Diameter.031 - .061 (0.79 - 1.56mm).062 - .092 (1.57 - 2.34mm)Clearance < .004 (0.10mm)
Punch
Punch
Stripper
StripperDie
Die
add ons for shapes
add ons for rounds
• Available April 2005
Additional charges apply to round or shape punch for extra straight before radius, extra back taper, or no back taper.
(up to 12.7mm)
Use Standard Punch and Die Price Plus:
punch & guiDe asseMBLy • Round • Shape Fitted • Optima® Add On
punches • Round • Shape • Optima® Add On
guiDes • Round • Shape (0˚) • Shape (0˚ & 45˚) • Shape (0˚ & 90˚)
stripper • Round • Shape Fitted
Dies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Slug Hugger® 2*
at 45˚ • Shape Positive • Shape Negative
13459 13461
–
1807 1816
–
2821 2822 2903 2904
13044 13143
2192 1808
12959
12960 1817 1818
Description cat. no. price
Quick aDjust spring pack asseMBLyCat. No. 13404
retaining ringCat. No. 24290
spring canisterCat. No. 13406
springCat. No. 24297
o-ringCat. No. 2282
punch heaDCat. No. 13405
punch heaD retainerCat. No. 13396
DoWeL pin(3/16 x .312) Cat. No. 6013
DoWeL pin (repLaceMent-rounD onLy) (3/16 x .595) Cat. No. 6015
M4x6 haLf Dog point screWCat. No. 24292
socket heaD set screW (M6 x 6mm) Cat. No. 6297
spring supportCat. No. 13407
o-ringCat. No. 24345
radius or 45˚ chamfer 4 corners
Total Add On
standard shapes
punches
Dies
Radius or Chamfer Size.001 - .062 (0.02 - 1.57mm).063 - .250 (1.58 - 6.35mm)
Greater than .250 (6.35mm)Any size
SD Single-D LD Long-D ET Equilateral Triangle SQ Square HX Hexagon
DD Double-D QD Quad-D OB Obround RT Rectangle OT Octagon
11
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
MEtric 1-1/4" (B) StAtionQUIK ADjUST
1-1/4" (B) station add ons
add ons for shapes
add ons for rounds
Additional charges apply to round or shape punch for extra straight before radius, extra back taper, or no back taper.
* Slug Hugger® dies must be ordered punch size plus clearance, .098 (2.49mm) min. dia. on rounds, .060 (1.53mm) min. width on shapes, .006 (0.15mm) min. total clearance (patented).
• Std. keying for square guides is 0˚ & 45˚.
† 'A' Dimension = longest distance across shape.
Maximum Material Thickness .250" (6.35mm)
Small Diameter.031 - .061 (0.79 - 1.56mm).062 - .092 (1.57 - 2.34mm).093 - .249 (2.36 - 6.32mm)Clearance < .004 (0.10mm)
Punch Die
Small Widths.031 - .039 (0.79 - 1.0mm)
.040 - .092 (1.01 - 2.34mm)'A' Dimension† <.437 (11.10mm)
Clearance < .004 (0.10mm)
Punch Die
(12.71 - 31.75mm)
notes
punch & guiDe asseMBLy • Round • Shape Fitted • Optima® Add On
punches • Round • Shape • Optima® Add On
guiDes • Round • Shape (0˚) • Shape (0˚ & 45˚) • Shape (0˚ & 90˚)
stripper • Round • Shape Fitted
Dies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative • Shape (0˚ & 45˚)
Slug Hugger® 2* • Shape (0˚ & 45˚) Pos. • Shape (0˚ & 45˚)Neg.
13431 13433
–
2185 2184
–
13413 13414 13415 13416
1890 1917
2194 2021 12961 2025 2026
12963 2263 2264
Description cat. no. price
Quick aDjust spring pack asseMBLy
Cat. No. 13399
retaining ringCat. No. 24294
spring canisterCat. No. 13402
springCat. No. 30
spring supportCat. No. 13403
punch heaDCat. No. 13400
punch heaD retainerCat. No. 13401
DoWeL pin(3/16 x .345) Cat. No. 6431
DoWeL pin (repLaceMent-rounD onLy) (3/16 x .500) Cat. No. 2131
o-ringCat. No. 24293
socket heaD set screW (M6 x 6mm)Cat. No. 25474
o-ringCat. No. 24295
•
•
12
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
1-1/4" (B) StAtion
* Slug Hugger® dies must be ordered punch size plus clearance, .098 (2.49mm) min. dia. on rounds, .060 (1.53mm) min. width on shapes, .006 (0.15mm) min. total clearance (patented).
• Std. keying for square guides is 0˚ & 45˚.
† 'A' Dimension = longest distance across shape.
aDj. punch heaD With screWCat. No. 1821
spring retainer With o-ringCat. No. 1824
o-ringCat. No. 2283
socket heaD set screW cone pt.(M6-1 x 10mm) (To be used with black oxide
adj. punch head) Cat. No. 6206
springCat. No. 1953
Maximum Material Thickness .250" (6.35mm)
1-1/4" (B) station add onsadd ons for rounds
Additional charges apply to round or shape punch for extra straight before radius, extra back taper, or no back taper.
add ons for shapes
Small Diameter.031 - .061 (0.79 - 1.56mm).062 - .092 (1.57 - 2.34mm).093 - .249 (2.36 - 6.32mm)Clearance < .004 (0.10mm)
Punch Die
Small Widths.031 - .039 (0.79 - 1.0mm)
.040 - .092 (1.01 - 2.34mm)'A' Dimension† <.437 (11.10mm)
Clearance < .004 (0.10mm)
Punch Die
Stripper
Stripper
(12.71 - 31.75mm)
notes
punch & guiDe asseMBLy • Round • Shape Fitted • Optima® Add On
punches • Round • Shape • Optima® Add On
guiDes • Round • Shape (0˚) • Shape (0˚ & 45˚) • Shape (0˚ & 90˚)
stripper • Round • Shape Fitted
Dies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative • Shape (0˚ & 45˚)
Slug Hugger® 2* • Shape (0˚ & 45˚) Pos. • Shape (0˚ & 45˚) Neg.
2851 2853
–
1827 1839
–
2859 2860 2861 2862
1890 1917
2194 2021
12961 2025 2026
12963 2263 2264
Description cat. no. price
DoWeL pin (repLaceMent-rounD onLy)(3/16 x .500) Cat. No. 2131
DoWeL pin(3/16 x .345) Cat. No. 6431
radius or 45˚ chamfer 4 corners
Total Add On
standard shapes
punches
Dies
Radius or Chamfer Size.001 - .062 (0.02 - 1.57mm).063 - .250 (1.58 - 6.35mm)
Greater than .250 (6.35mm)Any size
SD Single-D LD Long-D ET Equilateral Triangle SQ Square HX Hexagon
DD Double-D QD Quad-D OB Obround RT Rectangle OT Octagon
13
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
HEAvy Duty 1-1/4" (B) StAtion
* Slug Hugger® dies must be ordered punch size plus clearance, .098 (2.49mm) min. dia. on rounds, .060 (1.53mm) min. width on shapes, .006 (0.15mm) min. total clearance (patented).
• Std. keying for square guides is 0˚ & 45˚.
† 'A' Dimension = longest distance across shape.
aDj. punch heaD With screWCat. No. 1821
o-ringCat. No. 2283
Disc spring(20 Req'd) Cat. No. 2302
spring support With o-ringCat. No. 2300
socket heaD set screW cone pt.(M6-1 x 10mm) (To be used with black oxide adj. punch head) Cat. No. 6206
spacerCat. No. 2301
Maximum Material Thickness .312" (7.93mm)
1-1/4" (B) station add onsadd ons for rounds
Additional charges apply to round or shape punch for extra straight before radius, extra back taper, or no back taper.
add ons for shapes
Small Diameter.031 - .061 (0.79 - 1.56mm).062 - .092 (1.57 - 2.34mm).093 - .249 (2.36 - 6.32mm)Clearance < .004 (0.10mm)
Punch Die
Small Widths.031 - .039 (0.79 - 1.0mm)
.040 - .092 (1.01 - 2.34mm)'A' Dimension† <.437 (11.10mm)
Clearance < .004 (0.10mm)
Punch Die
Stripper
Stripper
(12.71 - 31.75mm)
notes
punch & guiDe asseMBLy • Round • Shape Fitted • Optima® Add On
punches • Round • Shape • Optima® Add On
guiDes • Round • Shape (0˚) • Shape (0˚ & 45˚) • Shape (0˚ & 90˚)
stripper • Round • Shape Fitted
Dies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative • Shape (0˚ & 45˚)
Slug Hugger® 2* • Shape (0˚ & 45˚) Pos. • Shape (0˚ & 45˚) Neg.
13520 13522
–
2305 2306
–
2859 2860 2861 2862
1890 1917
2194 2021 12961 2025 2026
12963 2263 2264
Description cat. no. priceDoWeL pin (repLaceMent-rounD onLy)
(3/16 x .500) Cat. No. 2131
DoWeL pin(3/16 x .345) Cat. No. 6431
14
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
1-1/4" (B) StAtionQUIK ADjUST
* Slug Hugger® dies must be ordered punch size plus clearance, .098 (2.49mm) min. dia. on rounds, .060 (1.53mm) min. width on shapes, .006 (0.15mm) min. total clearance (patented).
• Std. keying for square guides is 0˚ & 45˚.
† 'A' Dimension = longest distance across shape.
Maximum Material Thickness .250" (6.35mm)
1-1/4" (B) station add onsadd ons for rounds
Additional charges apply to round or shape punch for extra straight before radius, extra back taper, or no back taper.
add ons for shapes
Small Diameter.031 - .061 (0.79 - 1.56mm).062 - .092 (1.57 - 2.34mm).093 - .249 (2.36 - 6.32mm)Clearance < .004 (0.10mm)
Punch Die
Small Widths.031 - .039 (0.79 - 1.0mm)
.040 - .092 (1.01 - 2.34mm)'A' Dimension† <.437 (11.10mm)
Clearance < .004 (0.10mm)
Punch Die
Stripper
Stripper
(12.71 - 31.75mm)
notes
punch & guiDe asseMBLy • Round • Shape Fitted • Optima® Add On
punches • Round • Shape • Optima® Add On
guiDes • Round • Shape (0˚) • Shape (0˚ & 45˚) • Shape (0˚ & 90˚)
stripper • Round • Shape Fitted
Dies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative • Shape (0˚ & 45˚)
Slug Hugger® 2* • Shape (0˚ & 45˚) Pos. • Shape (0˚ & 45˚) Neg.
13465 13467
–
1827 1839
–
2859 2860 2861 2862
1890 1917
2194 2021
12961 2025 2026
12963 2263 2264
Description cat. no. price
Quik aDjust spring pack asseMBLyCat. No. 13408
retaining ringCat. No. 24294
spring canisterCat. No. 13402
springCat. No. 24299
o-ringCat. No. 2283
punch heaDCat. No. 13409
punch heaD retainerCat. No. 13401
DoWeL pin(3/16 x .345) Cat. No. 6431
DoWeL pin (repLaceMent-rounD onLy)(3/16 x .500) Cat. No. 2131
o-ringCat. No. 24293
socket heaD set screW (M6-1 x 10mm) Cat. No. 6297
spring supportCat. No. 13410
radius or 45˚ chamfer 4 corners
Total Add On
standard shapes
punches
Dies
Radius or Chamfer Size.001 - .062 (0.02 - 1.57mm).063 - .250 (1.58 - 6.35mm)
Greater than .250 (6.35mm)Any size
SD Single-D LD Long-D ET Equilateral Triangle SQ Square HX Hexagon
DD Double-D QD Quad-D OB Obround RT Rectangle OT Octagon
15
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
2" (c) StAtionSTAnDARD & WLS® FOR “OLD STyLE” PUnChES
socket heaD cap screW(M3 x 12mm) Cat. No. 6326
guiDe stripper ringCat. No. 5035
urethane(2 Req’d)(3/32 Sq. x 27/64) (Pkg of 50)
Cat. No. 6116
LockWasherCat. No. 6327
socket heaD cap screW(2 Req’d) (Spl. M5 x .8 Cone Pt.) Cat. No. 5197 LockWasher(2 Req’d) Cat. No. 2112
anti-Lock shiM Cat. No. 5412
punch hoLDer keyCat. No. 5373 guiDe
Cat. No. 5420
(31.78 - 50.80mm)
2" (c) station add ons
Small Width.031 - .039 (0.79 - 1.0mm)
.040 - .092 (1.01 - 2.34mm)Small 'A' Dimension†
< 1.150 (29.21mm)Clearance < .004 (0.10mm)
Small Diameter< 1.000 (25.4mm)
Clearance < .004 (0.10mm)
Punch
Punch
Stripper
StripperDie
Die
add ons for shapes
add ons for rounds
Additional charges apply to round or shape punch for extra straight before radius, extra back taper, or no back taper.
notes
Assemblies also available with quick-release stripper retention system (HP®) #5555 (1/2-13) or #5577 (m-12)
Guide Assys. are keyed for shapes at 0˚, 90˚, and 225˚.
• All punches will be shipped with no shear unless specified.
* Slug Hugger® dies must be ordered punch size plus clearance, .060 (1.53mm) min. width on shapes, .006 (0.15mm) min. total clearance (patented).
† 'A' Dimension = longest distance across shape.
Maximum Material Thickness .250" (6.35mm)
guiDe asseMBLy
• Gravity Feed • WLS® Ready
* These assemblies accept either 1/2-13 or M-12 style punches
punches • Round 1/2"-13 Thread • Round M-12 Thread • Shape 1/2"-13 Thread • Shape M-12 Thread • Optima® Add On
strippers • Round • Shape/Fitted
Dies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative
55835592
1847 1933 1853 1934
–
1848 1854
2196 1850 12964 1855 1856
Description cat. no. price
o-ringCat. No. 972430
aDjustMent push ButtonCat. No. 10539
Wave springCat. No. 971692
aDjustMent Locking BaLLCat. No. 972420
retaining ring Cat. No. 972441
aDjustMent shaftCat. No. 5735
Disc spring(12 Req’d) Cat. No. 5744
DriverCat. No. 5736
spring supportCat. No. 5748
springCat. No. 972396
Driver asseMBLyCat. No. 5729
punch hoLDer Cat. No. 5556
Disc spring(2 Req’d) Cat. No. 971690
socket heaD cap screW(M12 x 40mm)Cat. No. 6605
retaining ringCat. No. 972570
socket heaD cap screW(1/2-13 x 1.5 )Cat. No. 6606
spring coverCat. No. 5693
socket heaD cap screWCat. No. 429
16
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
3-1/2" (D) StAtionSTAnDARD & WLS® FOR “OLD STyLE” PUnChES
(50.83 - 88.90mm)
3-1/2" (D) station add ons
Small Width.031 - .039 (0.79 - 1.0mm)
.040 - .092 (1.01 - 2.34mm)Small 'A' Dimension†
< 1.900 (48.26mm)Clearance < .004 (0.10mm)
Small Diameter< 1.900 (48.26mm)
Clearance < .004 (0.10mm)
Punch
Punch
Stripper
StripperDie
Die
add ons for shapes
add ons for rounds
Additional charges apply to round or shape punch for extra straight before radius, extra back taper, or no back taper.
•
Maximum Material Thickness .250" (6.35mm)notes
Assemblies also available with quick-release stripper retention system (HP®) #5557 (1/2-13) or #5578 (m-12)
Note: Guide Assys. are keyed for shapes at 0˚, 90˚, and 225˚.
• 1/16" (1.6mm) Rooftop shear is given to all punches with 'A' dimension† greater than 2.000 (50.8mm), and width greater than .250 (6.35mm), at no extra charge.
• All punches .250 (6.35mm) and under in width will be shipped with no shear unless specified.
* Slug Hugger® dies must be ordered punch size plus clearance, .060 (1.53mm) min. width on shapes, .006 (0.15mm) min. total clearance (patented).
† 'A' Dimension = longest distance across shape.
guiDe asseMBLy
• Gravity Feed • WLS® Ready
* These assemblies accept either 1/2-13 or M-12 style punches
punches • Round 1/2"-13 Thread • Round M-12 Thread • Shape 1/2"-13 Thread • Shape M-12 Thread • Optima® Add On
strippers • Round • Shape
Dies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative
5584 5593
1863 1937 1868 1938
–
1864 1869
2198 1865
12965 1870 1871
Description cat. no. price
socket heaD cap screW(2 Req’d) (M5 x 12mm) Cat. No. 6110
guiDe stripper ringCat. No. 5036
urethane(3/32 Sq. x 27/64) (Pkg of 50)
Cat. No. 6116
LockWasher(2 Req’d) Cat. No. 2112
socket heaD cap screW(2 Req’d) (Spl. M5 x .8 Cone Pt.) Cat. No. 5197
LockWasher(2 Req’d) Cat. No. 2112
anti-Lock shiM Cat. No. 5413
punch hoLDer keyCat. No. 1862
guiDe With harDWareCat. No. 5430
o-ringCat. No. 972430
aDjustMent push ButtonCat. No. 5737
Wave springCat. No. 971692
aDjustMent Locking BaLLCat. No. 972420
retaining ring Cat. No. 972441
aDjustMent shaftCat. No. 5739
Disc spring(7 Req’d) Cat. No. 5449
DriverCat. No. 5740
spring supportCat. No. 5738
springCat. No. 972396
Driver asseMBLyCat. No. 5730
punch hoLDer Cat. No. 5558
Disc spring(2 Req’d) Cat. No. 971690
socket heaD cap screW(1/2 -13 x 2) Cat. No. 6325
retaining ringCat. No. 5747
radius or 45˚ chamfer 4 corners
Total Add On
standard shapes
punches
Dies
Radius or Chamfer Size.001 - .062 (0.02 - 1.57mm).063 - .250 (1.58 - 6.35mm)
Greater than .250 (6.35mm)Any size
SD Single-D LD Long-D ET Equilateral Triangle SQ Square HX Hexagon
DD Double-D QD Quad-D OB Obround RT Rectangle OT Octagon
socket heaD cap screWCat. No. 429
socket heaD cap screW(M12 x 50mm) Cat. No. 970467
spring cover Cat. No. 5423
17
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
4-1/2" (E) StAtionSTAnDARD & WLS® FOR “OLD STyLE” PUnChES
(88.93 - 114.30mm)
4-1/2" (e) station add ons
Small Width.031 - .039 (0.79 - 1.0mm)
.040 - .092 (1.01 - 2.34mm)
Small 'A' Dimension† < 3.400 (86.36mm)
Clearance < .004 (0.10mm)
Small Diameter< 3.400 (86.36mm)
Clearance < .004 (0.10mm)
Punch
Punch
Stripper
StripperDie
Die
add ons for shapes
add ons for rounds
Maximum Material Thickness .250" (6.35mm)
notes
Assemblies also available with quick-release stripper retention system (HP®) #5559 (1/2-13) or #5579 (m-12)
Note: Guide Assys. are keyed for shapes at 0˚, 90˚.
• 1/16" (1.6mm) Rooftop shear is given to all punches with 'A' dimension† greater than 2.000 (50.8mm), and width greater than .250 (6.35mm), at no extra charge.
• All punches .250 (6.35mm) and under in width will be shipped with no shear unless specified.
* Slug Hugger® dies must be ordered punch size plus clearance, .060 (1.53mm) min. width on shapes, .006 (0.15mm) min. total clearance (patented).
† 'A' Dimension = longest distance across shape.
guiDe asseMBLy
• Gravity Feed • WLS® Ready
* These assemblies accept either 1/2-13 or M-12 style punches
punches • Round 1/2"-13 Thread • Round M-12 Thread • Shape 1/2"-13 Thread • Shape M-12 Thread • Optima® Add On
strippers • Round • Shape
Dies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative
55855594
1876 1941 1881 1942
–
1877 1882
2200 1878 12967 1883 1884
Description cat. no. price
guiDe stripper ringCat. No. 5037
urethane(3/32 Sq. x 27/64) (Pkg of 50)
Cat. No. 6116
LockWasher(2 Req’d) Cat. No. 2112
socket heaD cap screW(2 Req’d) (M5 x 12mm) Cat. No. 6110
anti-Lock shiM Cat. No. 5413
punch hoLDer keyCat. No. 1862 5
guiDe With harDWareCat. No. 5438
o-ringCat. No. 972430
aDjustMent push ButtonCat. No. 5737
Wave springCat. No. 971692
aDjustMent Locking BaLLCat. No. 972420
retaining ring Cat. No. 972441
aDjustMent shaftCat. No. 5739
Disc spring(7 Req’d) Cat. No. 5449
DriverCat. No. 5742
spring supportCat. No. 5741
springCat. No. 972396
Driver asseMBLyCat. No. 5731
punch hoLDer Cat. No. 5560
socket heaD cap screW(4 Req’d) (Spl M5 x 13.39mm Cone Pt.)
Cat. No. 5210retaining ringCat. No. 5747
Additional charges apply to round or shape punch for extra straight before radius, extra back taper, or no back taper.
Lifter pin(4 Req’d) Cat. No. 5209
socket heaD cap screW(1/2-B x 2.000) Cat. No. 6325
Disc spring(2 Req’d) Cat. No. 971690
socket heaD cap screWCat. No. 429 socket heaD cap screW
(M12 x 50mm) Cat. No. 970467
spring cover Cat. No. 5423
18
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
rEPlAcEABlE inSErt ASSEMBlyFOR “OLD STyLE”
notes
• Optima® is standard on punch inserts.
• Blade insert punches under .375" (9.53mm) in width will be shipped with no shear unless specified.
• Double Valley Shear is recommended for widths of .187" (4.75mm) thru .375" (9.53mm) and minimum lengths of 2.000" (50.8mm) when used for nibbling.
• Undersized dimensions will incur additional charges. Please consult the fee schedule for the appropriate station to determine the charge.
See Shear chart page 18.
• For widths less than .093" (2.36mm), consult the sales desk.
• Maximum width .750" (19mm).
• Inserts are available as obround to be used with rectangle dies, to eliminate “Saw Tooth Effect.”
station
parts Description
Body (1/2" - 13) Body (M - 12) punch insert set (1/2" - 13) set (M - 12)
2623 1966 1969
262522862287
259019671970
256819651968
2" (c)
3-1/2" (D)
4-1/2" (e)
Socket Head Cap Screw – 3/8" - 16 x 1-1/2" long [2" (C) station]Socket Head Cap Screw – 3/8" - 16 x 1" long [for 3-1/2" (D), 4-1/2" (E) & 6" (F) stations]High Collar Lock Washer for 3/8" screwDowel Pin – 1/4" Dia. x .450" long (All Stations)
cat. no. cat. no. cat. no.price price price cat. no. price
262423722373
cat. no. price
6391601921296004
cat. no. price
replaceable insert assembly
19
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
cloSE to clAMPS tooling
3-1/2" (D) station for punching cLose to cLaMps
punches Thin ClampsThick Clamps Optima®
stripper pLates Thin Clamps Thick Clamps
Dies Slug Hugger® 2* (relief 2 sides, shp at 90˚) Slug Hugger® 2* (relief 2 sides, shp at 0˚-90˚) Slug Hugger® 2* (relief 1 side, shp at 90˚) Slug Hugger® 2* (relief 1 side, shp at 0 -̊90 )̊
Positive (relief 2 sides, shp at 90˚) Positive (relief 2 sides, shp at 0˚-90˚) Positive (relief 1 side, shp at 90˚) Positive (relief 1 side, shp at 0 -̊90 )̊
Negative (relief 2 sides, shp at 90˚) Negative (relief 2 sides, shp at 0˚-90˚) Negative (relief 1 side, shp at 90˚) Negative (relief 1 side, shp at 0 -̊90 )̊
50275114
-
5100 5115
5499
5500
12966
5501
5101
5328
2462
5331
5156
5329
2463
5332
Description cat. no. price
4-1/2" (e) station for punching cLose to cLaMps
punches Thin ClampsThick Clamps Optima®
stripper pLates Thin Clamps Thick Clamps
Dies Slug Hugger® 2* (relief 2 sides, shp at 90˚) Slug Hugger® 2* (relief 2 sides, shp at 0˚-90˚) Slug Hugger® 2* (relief 1 side, shp at 90˚) Slug Hugger® 2* (relief 1 side, shp at 0 -̊90 )̊
Positive (relief 2 sides, shp at 90˚) Positive (relief 2 sides, shp at 0˚-90˚) Positive (relief 1 side, shp at 90˚) Positive (relief 1 side, shp at 0 -̊90 )̊
Negative (relief 2 sides, shp at 90˚) Negative (relief 2 sides, shp at 0˚-90˚) Negative (relief 1 side, shp at 90˚) Negative (relief 1 side, shp at 0 -̊90 )̊
50295109
-
5094 5110
5502
5503
12968
5504
5095
5338
2465
5341
5158
5339
2466
5342
Description cat. no. price
• All punches will be shipped with no shear unless specified.
* Slug Hugger® dies must be ordered punch size plus clearance, .060 (1.53mm) min. width on shapes, .006 (0.15mm) min. total clearance (patented).
† 'A' Dimension = Longest distance across shape.
notes
20
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
SHEAr oPtionS
inverted rooftopsingle concave
Double valleyDouble concavestation 'a'
Dimensions †
Within 1.250" (31.75mm)
Within 2.000" (50.8mm)
Within 3.500" (88.9mm)
Within 4.500" (114.3mm)
1-1/4" (B)
2" (c)
3-1/2" (D)
4-1/2" (e)
special shears
1/16" (1.6mm) rooftop shear is given to all punches with 'A' dimension† greater than 2.000" (50.8mm) and width greater than .250" (6.35mm) at no extra charge. All punches .250" (6.35mm) and under in width will be shipped with no shear unless specified. † 'A' Dimension = Longest distance across shape.NOTE: In some instances, inverted rooftop is substituted for single and double concave shears.
add on priceshape
RoundRectangle, Square, Hexagon
Single “D”, Double “D”Obround
jk shear
rooftop
concave or Double concave
inverted rooftop
When nibbling, bite must be 75% of punch dimension or excessive side loading will result.
The punch is less resistant to breakage when punching at high tonnages because of inverted stresses.
More susceptible to breakage because of a sharp focal point for stresses—use great care.
type of shear Benefit Limitation
Double valley shear
jk shear
Best shear for nibbling when shape is long and narrow.
The punch is less resistant to breakage when punching at high tonnages because of inverted stresses.
A special punch tip shear that allows you to punch high strength materials with a reduced risk of breakage.
Can only be used on punches up to 1.000" (25.4mm) diameter or 'A' dimension†.
Also good shear for nibbling because it inverts stresses.
Best shear for nibbling because it inverts stresses.
Best shear for punching at maximum tonnages.
1/16" (1.6mm) shear 1/8" (3.2mm) shear 1/16" (1.6mm) shear 1/8" (3.2mm) shear
notes
if specified: 1/8" (3.2mm) maximum rooftop shear can be given at N/C for any round or shape in 2"(C), 3-1/2"(D), 4-1/2"(E) or 6"(F) stations. Additional charges apply for rooftop shear on any round or shape in 1/2"(A) or 1-1/4"(B) stations.
% x Material Thickness=Total Clearance
Best12 11 15 18 10 20
Maximum16 16 20 24 15 25
Minimum8 6 10 12 5 15
MaterialCopper, 1/2 Hard Brass, 1/2 Hard
Mild Steel Steel 0.50C
Aluminum, Soft Stainless Steel
Die cLearance seLection inforMation
% total clearance
INCREASE yOUR PROdUCTION WITh hP dURA-BLAdE®
Reach new levels of sheet metal parting productivity with Wilson Tool’s High Performance Dura-Blade parting tool for thick and thin turret punch presses.
Wilson Tool’s highly engineered HP Dura-Blade dramatically reduces downtime by maximizing the number of hits between sharpenings. Dura-Blade utilizes a replaceable, fully-guided blade insert made of Ultima® Premium tool steel. It also features quick release stripper plate retention and a push button adjustment system that allows for fast and easy tool changes.
Only HP Dura-Blade is uniquely equipped to handle the daily rigors of sheet metal parting, so you can finish the job right.
High Performance Features HP Dura-Blade includes all the performance-drivenfeatures of the HP-style tooling:
• HP-style quick release stripper retention for fast and easy tool changes• HP-style side-mounted push-button for fast and easy tool adjustmentsPlus• Cutting insert made with Ultima Premium tool steel increasing the grind life forextended punch use• Fully guided for maximum support and accuracy at the punching surface• Designed specifically for parting applications• Available with one- and two-sided relieved strippers for use in close-to-clamp applications (thick turret only)
Call 1-800-328-9646 or visit www.wilsontool.comfor more information.
ThE ULTIMATE PARTING SOLUTION. COMPLETEd.
The Dura-Die parting tool completes Wilson Tool’s ultimate parting solution. When combinedwith Wilson Tool’s popular Dura-Blade product, you are able to greatly increase the life of yourparting tools. When a new die is necessary, just replace the removable insert and you are quickly back up and running.
Available only from Wilson Tool, the Dura-Die parting tool includes the following features: • Unbeatable tool steel combination: The Dura-Die’s replaceable die inserts are made from Wilson Tool’s exclusive Ultima tool steel, allowing excellent wear resistance for maximum grind life. The die base is made from shock-resistant steel, allowing it to withstand even the highest punching force. Combined, these two steels give you the ultimate in durability and performance.
• Economical replaceable inserts – just replace the die inserts for quick changeovers. These inserts are a lower cost alternative to replacing the entire die.
• Available for standard parting in C, D, and E stations –close-to-clamp is available in D and E stations.
• Available with positive and SlugHugger2 relief options.
For more information on the Wilson Dura-Die, contact your Wilson Tool Sales Engineeror call 800-328-9646.
23
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
StAnDArD KEying locAtionS
punch view 1/2" (a) & 1-1/4" (B) station Die view
standard shapes
SD DD LD QD ET OB SQ RT hX OT Single-D Double-D Long-D Quad-D EquilateralTriangle Obround Square Rectangle Hexagon Octagon
punch view 2" (c) station Die view
punch view 3 1/2" (D) station Die view
punch view 4 1/2" (e) station Die view
24
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
non-StAnDArD KEying
Die View
front of MachineWilson Tool’s keying diagram.
ExampleShape at 23˚
When ordering shapes at non-standard angles, use the diagrams below to eliminate any confusion.
This key location matches Amada’s® turret punch press programming method.
front of Machine
Die View
station punches Diesguides or strippers
1/2" (a)
1-1/4" (B)
2" (c)
3-1/2" (D)
4-1/2" (e)
standard keying, plus extra pins or keys for shapes at other than 45° increments
station punches Diesguides or strippers
1/2" (a)
1-1/4" (B)
2" (c)
3-1/2" (D)
4-1/2" (e)
Not Applicable
Not Applicable
Not Applicable
shape at single angles other than standard (note: no add'l charge on a & B stns for shape at 45° increments)
stationpunches Dies
guides or strippersavailableoptions
add onprice
availableoptions
add onprice
1/2" (a)
1-1/4" (B)
2" (c)
3-1/2" (D)
4-1/2" (e)
standard keying, plus extra pins or keys for shapes at 45° increments
Not Available
Not Available
per pin
per pin
per pin
Not Available
Not Available
per key
per key
per key
per key
per key
Not Available
Not Available
Not Available
Not Available
0˚ & 45˚
0˚ & 180˚
45˚ Increments
45˚ Increments
45˚ Increments
Not Available
per pin
per pin
per pin
Not Available
0˚ & 45˚
0˚ & 180˚
45˚ Increments
45˚ Increments
45˚ Increments
Not Available
per key
per key
per key
per key
per key
per key
Not Available
Not Available
Not Available
25
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
Multi-toolS® for finn-PowEr® MAcHinES
MT 6 -16
Maximum 'A' Dimension of punch (mm)
Number of stations in the holder
Multi-Tool
Multi-Tool and Finn-Power are registered trademarks of Finn-Power International, Inc.
type code Description
notes
• For Multi-Tool add-ons, go to page 22.
• Ultima™ Premium Tool Steel is available on punches and dies. Contact sales desk for pricing and availability.
* Slug Hugger® dies must be ordered punch size plus clearance, .098 (2.49mm) min. dia. on rounds, .060 (1.52mm) min. width on shapes, .006 (0.15mm) min. clearance (patented).
Mt3ri
p&D assypunches • Round Punch Driver Assy. • Round • Shape Punch Driver Assy. • Shape • Punch Driver Only • Optima® Add Onstrippers • Round • ShapeDies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive
45293
353062581
352962586
35297–
7723277233
77236772347723777235
Description cat. no. price
Mt8ri
p&D assypunches • Round • Shape • Optima® Add Onstrippers • Round • ShapeDies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative
45292
68356836
–
474473
61776164688961656178
Description cat. no. price
Mt8i
p&D assypunches • Round • Shape • Optima® Add Onstrippers • Round • ShapeDies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative
45276
68356836
–
474473
61776164688961656178
Description cat. no. price
Mt 6-16 & Mt 10-16
punches • Round • Shape • Optima® Add Onstrippers • Round • ShapeDies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative
60756076
–
60736074
61876077688360786192
$27.0050.2518.25
28.2561.00
61.5032.0055.7550.2550.25
Description cat. no. price
Mt 6-24 & Mt 8-24
punches • Round • Shape • Optima® Add Onstrippers • Round • Shape (.750", 19.05mm Max 'A' dim) • Shape (7.756", 19.05mm 'A' dim)Dies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* .750 max • Shape Slug Hugger® 2* >.750 • Shape Positive .750 max • Shape Positive >.750 • Shape Negative .750 max • Shape Negative >.750
61506153
–
6151
6827
6154
61896152
6886
68876828615568306194
Description cat. no. price
Mt 20-8 & Mt 24-8
punches • Round • Shape • Optima® Add Onstrippers • Round • ShapeDies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative
60806147
–
61466148
61856081688561496190
Description cat. no. price
Mt 12-8
punches • Round • Optima® Add Onstrippers • RoundDies • Round Slug Hugger®* • Round Standard
6080–
6079
61856081
Description cat. no. price
Mt20i
p&D assypunches • Round • Shape • Optima® Add Onstrippers • Round • ShapeDies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative
45277
68386839
–
682935079
61856081688561496190
Description cat. no. price
26
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
Multi-toolS® for niSSHinBo MAcHinES
Note: Photos apply to 8-Station only.
notes
Old Design
New Design
Multi-Tool is a registered trademark of Finn-Power International, Inc.
* Slug Hugger® dies must be ordered punch size plus clearance, .098 (2.49mm) min. dia. on rounds, .060 (1.52mm) min. width on shapes, .006 (0.15mm) min. clearance (patented).
standard shapes ET Equilateral SD Single-D DD Double-D LD Long-D QD Quad-D Triangle
OB Obround SQ Square RT Rectangle hX Hexagon OT Octagon
Maximum punch 'A' Dimension† is .630 (16mm).†'A' Dimension = Longest distance across shape.A locking bracket Cat. No. 38018 is required for 3-1/2" (D) station auto index.
Wt MuLti-tooL® hoLDer8-station for 3-1/2" (D) station
Description cat. no. price
• P&D Assy • Locking Bracketpunches-new Design • Round • Shape • Optima® Add Onpunches-Old Design • Round • Shape • Optima® Add Onstrippers • Round • ShapeDies • Round Slug Hugger®* .500 (12.7mm) max punch dia. >.500 (12.7mm) punch dia. • Round Standard .500 (12.7mm) max punch dia. >.500 (12.7mm) punch dia. • Shape Slug Hugger® 2* .500 (12.7mm) max 'A' dim. >.500 (12.7mm) 'A' dim. • Shape Positive .500 (12.7mm) max 'A' dim. >.500 (12.7mm) 'A' dim. • Shape Negative .500 (12.7mm) max 'A' dim. >.500 (12.7mm) 'A' dim. • 8-16 RD SH 2 Die .500 (12.7mm) max punch dia • SH 2 RD DIE 8-16 > .500 (12.7mm) punch dia >.500 (12.7mm) 'A' dim.
38022 38018
6835 6836
–
6160 6161
–
474 473
6173 6177
6162 6164
6888 6889
6163 6165
6174 6178
6947
6949
Wt MuLti-tooL® hoLDer20-station for 3-1/2" (D) station
p&D assy • Locking Bracketpunches • Round • Shape • Optima® Add Onstrippers • Round • ShapeDies • Round Slug Hugger®* • Round Standard • Shape Slug Hugger® 2* • Shape Positive • Shape Negative
3802338018
68386839
–
682935079
61856081688561496190
Description cat. no. price
Multi-tool® add-ons
Small Width.031 - .039 (0.79 - 1.0mm)
.040 - .092 (1.01 - 2.34mm)Clearance < .004 (0.10mm)
Small Width.031 - .061 (0.79 - 1.56mm).062 - .092 (1.57 - 2.34mm)Clearance < .004 (0.10mm)
Punch
Punch
Stripper
Stripper
Die
Die
add-ons for shapes
add ons for rounds
27
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
AccESSoriESTOOLS
Sure Shot Sprayer1-QT (.95 liter) capacity
CAT. NO. 6120
Tru-Arc PliersCAT. NO. 6056
Punch LubricantCAT. NO. 6055
SAE Hex Key Wrench SetCAT. NO. 6057
Soft Face HammerCAT. NO. 6106
T-Handle extractor forlarge station guide assemblies
CAT. NO. 6483
28
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
AccESSoriESTOOLS
Spanner WrenchCAT. NO. 6058
Oil StoneCAT. NO. 6060
Metric Hex Key Wrench SetCAT. NO. 6105
Diamond FileCAT. NO. 6059
Rubberized abrasive wheelfor removing galling
CAT. NO. 8050
Spring Disassembly ToolCAT. NO. 8104
Zip Mar™ reduces the costly marring of material by the stripper. The disk is applied to the bottom of a standard stripping guide or stripper plate. A hole is then cut with a sharp knife to reveal the existing hole in the stripper.
“Zip-Mar” adhesive Disks™
priceQty.
pkg.(10)
pkg.(10)
pkg.(10)
pkg.(10)
pkg.(10)
1
cat. no.
60836084608560866087
6108
station
1/2" (A) 1-1/4" (B) 2" (C) 3-1/2" (D) 4-1/2" (E)
6" x 12"(15.2 x 30.5cm)
Sheet
29
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
AccESSoriES
8 Drawer arrangement & capacity consisting of:3 drawers for 1/2" (A) station tooling: • 18 punch & guide assemblies (per drawer) • 36 dies & 18 additional punches (per drawer)3 drawers for 1-1/4" (B) station tooling: • 12 punch & guide assemblies (per drawer) • 24 dies & 12 additional punches (per drawer)1 drawer for 2" (C) station and 3-1/2" (D) station tooling: • 12 2" or 3-1/2" station punches, stripper plates and dies1 drawer (9 compartments) for 4-1/2" (E) station tooling: • 6" (F) station tooling, large station guide assemblies and misc.
Cabinet includes lock with two keys and forklift base.Dimensions: 42" (107 cm) high x 28" (71 cm) wide x 29" (74 cm) deep.Standard color: Classic Blue
Note: Tool cabinets are shipped motor freight-collect
tooling cabinetcat. no.
90001
price
90002
90003
90004
90005
90006
Plastic Drawer Liners
Mobile Base
Maple Top
Cart Handle (1)
Ribbed Rubber Mat
thick turret tooling cabinet
options
DescriptionShear Grinding Fixture
1/2" Tooling Sleeve Adapter
1-1/4" Tooling Punch and Die Holder
1-1/4" to 1/2" Die Adapter
Series 80®/90® Tooling Punch Holder
Dura-Blade Grinding Fixture
Pointer (Replacement)
Degree Scale (Replacement)
6034
6043
6042
6088
6040
6932
6035
6036
cat. no. price
shear grinding fixture and accessories
8 Station Thick/Thin Punch & Die Holder
8mm Punch & Die Holder
16mm Punch & Die Holder
24mm Punch & Die Holder
cat. no.Description6812
6156
6157
6158
price
Multi-tool® punch and Die holders
30
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
AccESSoriES
1/2" (A) StationForm Down
center punch
Complete Form-Down Assembly (incl. die)(.250" (6.35mm) max. mat.)
Replaceable Center Punch Button
Punch Body
Guide
Blank Die
Light Spring (for > .250" (6.35mm) mat.)
1-1/4" (B) Station-Complete Set (not shown)
1-1/4" (B) Station Upper Punch Assembly
1-1/4" (B) Station Lower Die Assembly
1-1/4" (B) Station Replaceable Die Insert .375" (9.53mm)
Description cat. no. price
form-Down for 1/2" (a) station
2105
2107
2106
2267
6491
12568
1852
cat. no.
6091
pricetool kit consists of the following:
(1) Tool Box, (1) Oil Stone, (1) Diamond File, (1) Tru-Arc Pliers, (1) Spanner Wrench, (1) Punch Lubricant, (1) Soft Face Hammer, (1) Metric Hex Key Wrench Set, (1) Hex Key Wrench Set (English), (1) Assortment of 4-sizes of square urethane ejectors.
tool kit
hole Dia. in punch1/8" (3.2mm)
3/16" (4.8mm)
3/8" (9.5mm)
1/2" (12.7mm)
Assortment
square urethane
slug ejectors
Qty.
50
50
50
50
50
cat. no.
6116
6117
6118
6119
6410
price
form-up for 1-1/4" (B) station
31
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
AccESSoriESALIGnMEnT TOOLS
upper unitcat. no.
Lower unitstation
1840194719492290
cat. no. price
1841194819502291
alignment tools
upper unitprice
Lower unitstation
25972599
cat. no. price
2598495
alignment tools for amada single track Machines
In order to align A and B stations, you need either one or two tools for each size station, depending on the type of machine. For a single track turret, one tool is required to align each station. For a multiple track machine, two tools are required to align each station (one in the front of the station and one in the back).
price
cat. no.
1/2" (A) 1-1/4" (B)
2" (C) 3-1/2" (D) 4-1/2" (E) 6" (F)
station26012602
**
*NOTE: Two of each Cat. No. required.
alignment tools for amada Multiple track Machines
pricecat. no.
1/2" (A) 1-1/4" (B)
$647.00582.75
32
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
AccESSoriESADAPTERS
NOTE: Maximum material thickness for above adapters -.135" (3.4 mm) mild steel and aluminum, .090" (2.3 mm) stainless steel.
Description cat. no. price
Punch & Guide Assembly Adapter (Keyed at 0˚ & 180˚)Die AdapterScrew
228422202119
Description cat. no. price
Punch & Guide Assembly AdapterDie AdapterScrew
247624756206
1-1/4" (B) to 1/2" (a) station adapter
2" (c) to 1-1/4" (B) station adapter
Description cat. no. price
Punch & Guide Assembly Adapter (not shown)Die Adapter
249235058
3-1/2" (D) to 1-1/4" (B) station adapter
Description cat. no. price
Punch & Guide Assembly Adapter (not shown)4-1/2 Tk to 1-1/4 Thk Die Adapter
26802681
4-1/2" (e) to 1-1/4" (B) station adapter
33
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
AccESSoriESBALL RIDInG DIE & BRUSh DIE
The “Ball Riding Die,” which consists of a spring loaded ball, has been designed to help eliminate several problems. The most common problems result from the higher height of the form-up dies. These problems are:• Sheet hang-up from the material running into a higher
die, such as a forming tool.• Sheet deformation from punching next to dies of
different heights.• Damage to forming die inserts when the die cap receives
uneven loading during punching in neighboring stations.
To reduce sheet and tool damage in forming applications, two of these dies are placed in stations surrounding the forming tool. When the sheet approaches the form-up die, it is lifted by the ball riding die. When the forming operation begins, the ball in the surrounding die recesses with the sheet. Once the form has been achieved and the tool strips, the spring loaded balls lift the sheet back to its original height. This allows the sheet to move more freely through the turret, avoiding collisions with the form-up tool.
Placing these dies into the vacant stations on a turret loaded on one side can also eliminate material crashes.
The primary use for brush dies is in applications where any marking that might be caused by ball riding dies is not acceptable.
Brush Die
cat. no.
27602761276227632764
price
cat. no.
2375482
135911359213593
pricestation 1/2" (A) 1-1/4" (B) 2" (C) 3-1/2" (D) 4-1/2" (E)
station 1/2" (A) 1-1/4" (B) 2" (C) 3-1/2" (D) 4-1/2" (E)
Ball riding Die
34
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
AccESSoriESPUnCh & DIE ShIMS
station
1/2" (A) 1-1/4" (B) 2" (C) 3-1/2" (D) 4-1/2" (E)
station
1/2" (A) 1-1/4" (B) 2" (C) 3-1/2" (D) 4-1/2" (E) 6" (F) 6" (F)
cat. no.
21012097208920812073
cat. no.
22082209221022112212W200W200
Qty.
11111
Qty.
25251055
min 10min 100
individually
package
price
Die shims
cat. no.
21042100209220842076
cat. no.
21722173217421752176W200W200
Qty.
11111
Qty.
25251055
min 10min 100
individually
package
.060 thick (1.5 mm)
Die shims
.010 thick (0.25 mm)
station
1/2" (A) 1-1/4" (B) 2" (C) 3-1/2" (D) 4-1/2" (E)
station
1/2" (A) 1-1/4" (B) 2" (C) 3-1/2" (D) 4-1/2" (E) 6" (F) 6" (F)
cat. no.
27212723272527272729
cat. no.
27222724272627282730W200W200
Qty.
11111
Qty.
25251055
min 10min 100
individually
package
Die shims
.030 thick (0.75 mm)
cat. no.
package of 15 ea.individual
price
681568166817681868196820682168226823682468256826
cat. no. pricethickness
Machinetype
680068016802680368046805680668076808680968106811
station shape
3-1/2 – 8i/Ri3-1/2 – 8i/Ri
MT 12 & 20 – 8MT 12 & 20 – 8MT 12 & 20 – 8MT 12 & 20 – 8MT 6 & 10 – 16MT 6 & 10 – 16MT 6 & 8 – 24MT 6 & 8 – 24
1-1/4 – 51-1/4 – 5
ROUNDROUNDSHAPESHAPE
FINN-POWER®
FINN-POWER®
FINN-POWER®
FINN-POWER®
FINN-POWER®
FINN-POWER®
FINN-POWER®
FINN-POWER®
FINN-POWER®
FINN-POWER®
THICK TURRETTHICK TURRET
.010" (0.25 mm)
.030" (0.76 mm)
.010" (0.25 mm)
.030" (0.76 mm)
.010" (0.25 mm)
.030" (0.76 mm)
.010" (0.25 mm)
.030" (0.76 mm)
.010" (0.25 mm)
.030" (0.76 mm)
.010" (0.25 mm)
.030" (0.76 mm)
Die shims for Multi-tools®
station
1/2" (A) 1-1/4" (B) 2" (C) 3-1/2" (D) 4-1/2" (E)
station
1/2" (A) 1-1/4" (B) 2" (C) 3-1/2" (D) 4-1/2" (E) 6" (F) 6" (F)
cat. no.
18981899152
209620882080
Qty.
111111
individually.060 thick (1.5 mm)
station
1/2" (A) 1-1/4" (B) 1-1/4" (B) Metric 2" (C) 3-1/2" (D) 4-1/2" (E)
packagecat. no.
2167216898
21692170 2171
Qty.
2525251055
station
1/2" (A) 1-1/4" (B) 1-1/4" (B) Metric 2" (C) 3-1/2" (D) 4-1/2" (E)
punch shims
price
price
price
price
price
price price
cat. no.
65886589
5106
Shim Rack onlyShim Rack HookShim Rack withDie Shims
price
Must specify shim thickness .010, 030 or .060
$1.501.501.501.502.002.001.751.751.751.751.501.50
35
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
AccESSoriESnOTChER STRIPPER PLATE
station shape priceMax. punch
'a' Dimension†
2.000" (50.8 mm)
3.500" (88.9 mm)
4.500" (114.3 mm)
Round
Round
Round
Shape
Shape
Shape
notcher stripper plate
cat. no.
246924702471247224732474
notcher stripper plate
3-1/2" (D)
4-1/2" (E)
the notcher stripper plate is:• Hardened tool steel stripper plate.• Precision ground to exacting tolerances.• Uniquely designed to give the rigidity and slip fit
of a special Notching Unit.
What does this mean to you?• Better guiding, less tool deflection.• Greater flexibility of tooling applications.• Longer tool life.• Standard punch can be used.
2" (C)
notes
• Designed to fit Wilson Tool manufactured guide assemblies only.
• For larger sizes, please contact our sales desk.
† 'A' Dimension = Longest distance across shape. min. total clearance (patented).
36
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
AccESSoriESWILSOn PUnCh & DIE GRInDER
the Wilson punch & Die grinder is the latest in a long line of Wilson tool products designed to help you work smarter—not harder.
Designed by DCM specifically for resurfacing punches and dies, it can save you time, space and money compared to existing sharpening methods. Here’s how:
• 5 hp spindle motor. Handles large dies easily.• CBN grinding wheel. Provides aggressive material removal
rates and a high-quality surface finish.• Dual coolant application. Coolant is supplied both externally
and through the spindle for maximum heat removal while grinding—helping to maintain tool integrity.
• Regrind punches up to 10° angle. The punch fixturing allows sharpening of rooftop and straight angle shear punches with angles up to 10° and everything in between.
• Simple fixturing design. Allows for quick, easy loading and unloading of parts and accurate, repeatable process control.
• Auxiliary magnetic chuck standard. Accommodates items that cannot be secured in the three-jaw chuck.
• Autofeed. Frees up the operator to perform other shop duties during the grinding process and allows for accurate cut depths.
• Heavy-duty three-jaw chuck standard. Will accommodate all punches and dies up to 6" (152 mm) diameter.
• Small footprint. At 40" x 48" (101 x 122 cm), the Wilson Punch and Die Grinder requires minimal floor space.
In addition, the grinder comes standard with a rigid, heavy-duty 18" (45.7 cm) diameter rotary table that eliminates any chance for the chatter common with smaller tables.
To learn more about the new Wilson Punch & Die Grinder and how to invest in this effective, economical means to maximize punch and die life, please contact your local Wilson Tool representative, or call our sales desk at 800-328-9646.
The fully enclosed punch and die grinder includes an integral mist collection unit and provides full containment of the grinding area vs. the standard open air containment shrouding.
Description pricecat. no.
Machine & consumables pricing
230V 3 Phase 30 Amp grinder230V 3 Phase 30 Amp grinder - Enclosed460V 3 Phase 20 Amp grinder460V 3 Phase 30 Amp grinder - Enclosed1⁄2 gallon coolant mix5 gallon coolant mixCoolant filter pack (50 sheets)6" replacement CBN wheelProduction coolant filtration systemReplacement filter roll for filtration system
6854693868556939685668576858685968606861
37
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
orDerMinimum order is $50.00
creDit reQuireMentsAll orders are subject to approval by our Credit Department. If you are a new account, please furnish us with your tax exempt status, a bank reference, three current supplier references and/or your current D&B rating with your first order. A credit limit will be imposed on new accounts until credit has been established.
payMent terMsTerms are net 10 days. Catalog prices are subject to change without notice.
freightOrders are shipped F.O.B. from our manufacturing facility. (International Shipments are Incoterms: Ex Works).
orDer canceLLation In the event an order is cancelled, an additional charge will be assessed to cover the cost of labor and material.
returneD MateriaL A handling/restocking fee will be applied to all standard products returned for credit. A return authorization number and shipping instructions must be obtained in advance before an item can be returned.
cLaiMsAll claims or product shortages must be made within 30 days of the invoice date.
tErMS of SAlE
notES
Toll Free U.S.A. & CanadaTel: 800-328-9646Fax: 800-222-0002
Toll Free MexicoTel: 001-800-741-2510Fax: 001-800-544-2096
Website & [email protected]
LocalTel: 651-286-6001Fax: 651-286-5959
Punch Press Tooling Division12912 Farnham Avenue • White Bear Lake, MN 55110
Tel (Free): 800-328-9646Fax (Free): 800-222.0002Email: [email protected]
PRECISION TOOLING.UNBEATABLE PERFORMANCE.
For more than 40 years, Wilson Tool International ® has provided
industry-leading tooling solutions that enhance the performance
of sheet metal fabricators and stampers worldwide.
The three divisions of Wilson Tool – Punching, Press Brake, and
Stamping – represent the most comprehensive line of tooling
systems and accessories available. Our ability to consistently
provide innovative, high quality products that outlast and
outperform the competition is why the world’s most successful
fabricators rely upon Wilson Tool tooling systems.
A knowledgeable global sales force, multilingual customer
support staff, same-day shipping and extensive distribution
network are just a few of the benefits that keep our customers
coming back time and again.
© 2012 Wilson Tool International®
P203C
WILSON TOOL INTERNATIONAL
Wilson Tool International, Inc. - United States
Tel (Free): 800-328-9646 | Tel: 651-286-6001 Fax (Free): 800-222-0002 | Fax: 651-286-5959 Email: [email protected]
Wilson Tool International, Ltd. - United Kingdom
Tel (Free): 0800-373748 | Tel: +44 1793 831818 Fax (Free): 0800-373758 | Fax: +44 1793 831945 or 46 Email: [email protected]
Wilson Tool International - China
Tel: +86 21 51089638 | Fax: +86 21 64422195 Email: [email protected]
Wilson Tool International - Germany
Tel (Free): 00800-9457668665 | Tel: +49 5723 747 0 Fax (Free): 00800-945766329 | Fax: +49 5723 747 10 Email: [email protected]
Wilson Tool International A/S - Denmark
Tel (Free): 80 20 20 24 | Tel: +45 44 53 1699 Fax (Free): 80 20 20 26 | Fax: +45 44 53 0607 Email: [email protected]
Wilson Tool International - France
Tel: +33 (0) 164 13 47 80 | Fax: +33 (0) 164 13 47 81 Email: [email protected]
Wilson Tool International - Argentina
Tel: +54 114 7634004 | Fax: +54 114 5084190 Email: [email protected]
Wilson Tool - South Africa (Pty) Limited
Tel: +27 877 217 875 | Fax: 086 657 8629 Email: [email protected]
The Wilson Tool Company S. de R.L. de C.V. - Mexico
Tel: 52 (81) 8865-4820 | Fax: 52 (81) 8865-4599 Email: [email protected]
Exacta Precision Products - Ontario
Tel: 800-268-5573 | Fax: 800-668-9314 Email: [email protected]
Exacta FabTool - Ontario
Tel: 905-840-2240 | Fax: 905-840-1032 Email: [email protected]
Milling Puncionadeiras - Brazil
Tel/Fax: 55 11 5621-2100 Email: [email protected]