8/30/12
PAR-28 Installation2013 Ford Police Interceptor Utility
• 2013 Ford Police Interceptor Utility does not come with fog lights
• Front facia is made from solid plastic
• Round area in facia needs to be cut out for fog light to mount
• Bracketry on the back side of front facia to support fog lights needs
to be purchased from Ford
PAR-28 Installation
The following parts need to be purchased from your local Ford dealer:
• (1) Driver Side Bracket – (BB5Z-15266-A)
• (1) Passenger Side Bracket – (BB5Z-15266-B)
• (6) Bracket Mounting Screws – (W706805-S902)
• (6) Mounting Nuts – (W715051-S439)
• (8) Light Mounting Screws – (N807011-S424)
• Fog Light – (PAR28)
• Explorer/Utility Bracket - (P28FX11)
PARTS
Using a 3.5” Hole Saw, Cut Out Fog Light Hole in FaciaSTEP 1
Before After
Remove Plastic Tabs from Ford Mounting Brackets(BB5Z-A & BB5Z-15266-B)STEP 2
Install Mounting Nuts into facia(W715051-S439)STEP 3
Mount PAR-28 Lighthead and P28FX11 together per Installation GuideSTEP 4
Install PAR-28 and Bracket Assembly into Ford Mounting Bracket using the Light
Mounting Screws (N807011-S424)STEP 5
Install Complete Assembly into facia using the Bracket Mounting Screws (W706805-5902)STEP 6
Finished Product