Download - 603 POLYURETHANE
วัสดุอดุรอยตอประเภทโพลียูรีเทน
LANKO 603 POLYURETHANE
Application Method
Page 1/2 May 2006
603 POLYURETHANE
Application range
603 POLYURETHANE is a one component polyurethane sealant for sealing expansion joint, construction joint, crack, door and window frame, pre-cast panel, sanitary ware or grouting tiles, roof tiles.
Joint preparation
• Maximum movement capacity for sealant used in the building industry rises to 25%
• Recommended dimensions for joints are
Width (W) : 5-50 mm. Depth (D) : 5-25 mm.
If width ≤ 10 mm. then D = W If width > 10 mm. then D = W/2
Joint with are expected to experience cyclical movement should have a width to depth ratio 2: 1
• Damage must be repaired prior to application, using a
mortar with 751 LANKOLATEX or 731 LANKOREP STRUCTURE.
• Joint must be very clean, sound, dry, dust-free and without any traces of oil, laitance, paints and curing compound.
• A bond breaker such as masking tape and round polyethylene foam (LANKO FONDS DE JONTS backing rod) should be sued to ensure that the joint maintains a movement and to reduce the depth of the joint to be filled.
• The excellent adhesion quality of 603 POLYURETHANE generally make a primer unnecessary. However, if the inside joint surfaces are porous a primer coat should be applied.
Product and tool preparation
310 ml. Cartridge
• Remove the seaming at the base of the cartridge.
• Pierce the top part of the threaded end of the cartridge.
• Screw on the plastic tip and cut diagonally as required • Depress thumb release plate of the handy gun and
withdraw push rod. • Insert the cartridge. Ensure
secure placement within end ring.
• Move push rod hard against cartridge plunger. Cartridge should be firmly in place.
• Depress trigger to commence gunning.
600 ml. Sausage
• Depress thumb release plate of the barrel gun and withdraw “T” push rod.
• Turn front-end cap anticlockwise. Put the nozzle Insert the sachet into the barrel gun. Cut off exposed end of sachet. Ensure sachet is well opened and that no cellophane extends beyond sealant to clog nozzle.
• Attach front-end cap to barrel with a clockwise turn. • Cut the nozzle as required and depress trigger to
commence gunning.
Bond breaker
603 POLYURETHANE W
D
Page 2/2 May 2006
The information provided in this document results from our knowledge of the products and our experiences. On-site result may vary, in particular according to the product application methods adopted. Where application methods not covered by this document and used, customers must request specific additional information and/or carry out a representative test before using the products. The above-mentioned information in no way constitutes a warranty relative to the use of the products.
ParexDavco (Thailand) Co.,Ltd. 3rd Floor Lumpini II Building 247 Sarasin Road, Lumpini, Pathumwan, Bangkok 10330 Telephone: 66(0)2 651 9838 Facsimile: 66(0)2 651 8003 Website: Parexdavco.com.
603 POLYURETHANE
Application
• Squeeze out one or more beads depending on the width of the joint to be filled.
• Once the sealant has been applied a small timber spatula or finger soaked in soapy water shall be used to compact the sealant into the joints and to achieve a smooth finish.
• Any masking tape applied should be removed before the sealant cures.
Consumption
• One 310 ml. Cartridge fills a 3-m long of 1×1 cm. gap. • One 600 ml. Sausage fills a 6-m. long of 1x1 cm. gap.
Precautions
• Do not breathe vapors of fumes. • Avoid contact with eyes and skin. • Use only with adequate ventilation. • Wash thoroughly after handing.
Remarks
• For characteristics, please see the catalogue. • For safety matter, please see the material safety data
sheet.
Page 1 of 3
Date of Issue: November 2003
3TH FL. Lumpini II Building, 247 Sarasin Rd., Pathumwan, Bangkok 10330 THAILAND.
Tel : 66(0)2651-9838 Fax : 66(0)2651-8003 www.ParexDavco.com.
MATERIAL SAFETY DATA SHEET
Davco Construction Materials (Thailand) Co.,Ltd.
IDENTIFICATION PRODUCT NAME:
LANKO 603 POLYURETHANE
UN No: Not allocated
OTHER NAMES: Not relevant DANGEROUS GOODS CLASS: Not allocated
SUBSIDIARY RISK: Not allocated
HAZCHEM CODE: Not allocated
POISON SCHEDULE: Not allocated
USE: Packed in 310 ml cartridges and 600 ml sausage. Elastomeric joint sealant for expansion joints in concrete structures
etc.
PHYSICAL PROPERTIES APPEARANCE: Highly thixotropic, tacky material in various
colours. Cured by reaction with moisture in the air to an elastic rubber like material.
FLAMMABILITY
LIMITS %:
UEL Not applicable
LEL Not applicable
BOILING POINT: Not applicable FLASHPOINT, (Closed Cup): Not applicable
VAPOUR PRESSURE: Not determined SOLUBILITY IN WATER: Insoluble, but reacts slowly with water
SPECIFIC GRAVITY: 1.17
INGREDIENTS
CHEMICAL NAME
CAS No.
PROPORTION
% (w/w)
3 Isocyanatemethyl-3,5,5-Trimethylcyclohexyl isocyanate 1098-71-9 0.1-1%
Xylene 1330.-20-7 2.5-10%
Ethyl Benzene 100-41-4 1-2.5%
Non hazardous ingredients To 100%
Page 2 of 3
Product Name: LANKO 603 POLYURETHANE
Davco Construction Materials (Thailand) Co.,Ltd.
HEALTH HAZARD INFORMATION HEALTH EFFECTS - ACUTE
SWALLOWED: Harmful, seek medical advice.
EYE: Irritant, seek medical advice.
SKIN: Mild irritant due to solvent, avoid contact.
INHALED: No hazard in general use, good ventilation required in confined spaces.
HEALTH EFFECTS – CHRONIC Potential skin sensitiser due to xylene
FIRST AID SWALLOWED: Do not induce vomiting, seek medical attention.
EYE: Immediately hold eye open, wash with copious quantities of water for at least 15 minutes and seek medical attention.
SKIN: Remove affected clothing and thoroughly wash affected are with soap and water.
INHALED: Not normally a hazard but if overcome, remove for fresh air and resuscitate as necessary, seek medical attention.
ADVICE TO DOCTOR In all cases of ingestion, seek advice from 0800 734 607
PRECAUTIONS FOR USE ENGINEERING CONTROLS: Local ventilation not normally necessary but should be considered if used in poorly ventilated or very
confined spaces. Alternatively a respiratory protection mask fitted with type A1 filter and complying with AS 1716.
Respiratory Devices and used in accordance with AS 1715 which describes use and maintenances.
PERSONAL PROTECTION EYES: Chemical goggles, safety glasses or full-face shield.
Do not store or consume food, drink or tobacco in an area where they may become contaminated with this material. Wash thoroughly before eating, smoking, applying cosmetics etc.
FLAMMABILITY Not flammable under conditions of use in well ventilated areas. The product will burn if exposed to direct flame. A fire will cause the decomposition of the poly urethane causing the production of carbon dioxide, carbon monoxide, hydrogen chloride and oxides of nitrogen. Under certain combustion conditions , traces of hydrogen chloride gas may be generated, Self contained breathing apparatus is recommended when fighting fires involving large quantities of LANKO 603 POLYURETHANE.
SAFE HANDLING INFORMATION STORAGE AND TRANSPORT
STORAGE AND TRANSPORT
Storage between 0°C and 30°C is recommended. Above 45°C material may polymerize without hazard. Protect from moisture and extremes of temperature.
SPILLS AND DISPOSAL Not of spillable consistency. Clean up with cloth or tissue moistened with white spirits or allow to cure and remove mechanically . Dispose of at an approved landfill waste disposal site when fully cured.
FIRE / EXPLOSION HAZARD EXTINGUISHING MEDIA:
Fight fires with foam, CO2 , or dry chemical extinguishers. Do not use water. Produces oxides of nitrogen and under certain combustion conditions, traces of hydrogen cyanide could be evolved.
Page 3 of 3
Product Name: LANKO 603 POLYURETHANE
Davco Construction Materials (Thailand) Co.,Ltd.
OTHER INFORMATION Persons known to be hypersensitive (asthma, chronic bronchitis) should not use this product.
CONTACT POINT Technical Services Telephone: 66(0)2651-9838
Fax: 66(0)2650-2847
The information in this document is given to provide details of known hazards and is prepared from sources believed reliable, and can only be used for safety and health purposes. The Company makes no warranty that it is in all cases correct and sufficient. Prepared along Worksafe Guidelines. This Material Safety Data Sheet can only be copied in its entirety without any alterations.
Page 1 of 3
Date of Issue: January 2003
5TH FL. Lumpini II Building, 247 Sarasin Rd., Pathumwan, Bangkok 10330 THAILAND. Tel : 66(0)2651-9027-36, Fax : 66(0)2651-8003 E-Mail : [email protected]
MATERIAL SAFETY DATA SHEET
Davco Construction Materials(Thailand)Co.,ltd.
IDENTIFICATION PRODUCT NAME:
LANKO 603 POLYURETHANE
UN No: Not allocated OTHER NAMES: Not relevant DANGEROUS GOODS CLASS: Not allocated SUBSIDIARY RISK: Not allocated
HAZCHEM CODE: Not allocated
POISON SCHEDULE: Not allocated
USE: Packed in 310 ml cartridges and 600 ml sausage. Elastomeric joint sealant for expansion joints in concrete structures etc.
PHYSICAL PROPERTIES APPEARANCE: Highly thixotropic, tacky material in various
colours. Cured by reaction with moisture in the air to an elastic rubber like material.
FLAMMABILITY LIMITS %:
UEL Not applicable
LEL Not applicable BOILING POINT: Not applicable FLASHPOINT, (Closed Cup): Not applicable VAPOUR PRESSURE: Not determined SOLUBILITY IN WATER: Insoluble, but reacts slowly
with water SPECIFIC GRAVITY: 1.17
INGREDIENTS
CHEMICAL NAME
CAS No.
PROPORTION % (w/w)
3 Isocyanatemethyl-3,5,5-Trimethylcyclohexyl isocyanate 1098-71-9 0.1-1% Xylene 1330.-20-7 2.5-10% Ethyl Benzene 100-41-4 1-2.5% Non hazardous ingredients To 100%
Page 2 of 3
Product Name: Lanko 603 Polyurethane
Davco Construction Materials(Thailand)Co.,ltd.
HEALTH HAZARD INFORMATION HEALTH EFFECTS - ACUTE
SWALLOWED: Harmful, seek medical advice. EYE: Irritant, seek medical advice. SKIN: Mild irritant due to solvent, avoid contact. INHALED: No hazard in general use, good ventilation required in confined spaces.
HEALTH EFFECTS – CHRONIC Potential skin sensitiser due to xylene
FIRST AID SWALLOWED: Do not induce vomiting, seek medical attention. EYE: Immediately hold eye open, wash with copious quantities of water for at least 15 minutes and seek medical
attention. SKIN: Remove affected clothing and thoroughly wash affected are with soap and water. INHALED: Not normally a hazard but if overcome, remove fo fresh air and resuscitate as necessary, seek medical
attention.
ADVICE TO DOCTOR In all cases of ingestion, seek advice from 0800 734 607
PRECAUTIONS FOR USE ENGINEERING CONTROLS: Local ventilation not normally necessary but should be considered if used in poorly ventilated or very
confined spaces. Alternatively a respiratory protection mask fitted with type A1 filter and complying with AS 1716. Respiratory Devices and used in accordance with AS 1715 which describes use and maintenances.
PERSONAL PROTECTION EYES: Chemical goggles, safety glasses or full-face shield. Do not store or consume food, drink or tobacco in an area where they may become contaminated with this material. Wash thoroughly before eating, smoking, applying cosmetics etc.
FLAMMABILITY Not flammable under conditions of use in well ventilated areas. The product will burn if exposed to direct flame. A fire will cause the decomposition of the poly urethane causing the production of carbon dioxide, carbon monoxide, hydrogen chloride and oxides of nitrogen. Under certain combustion conditions , traces of hydrogen chloride gas may be generated, Self contained breathing apparatus is recommended when fighting fires involving large quantities of LANKO 603 POLYURETHANE.
SAFE HANDLING INFORMATION STORAGE AND TRANSPORT
STORAGE AND TRANSPORT
Storage between 0°C and 30°C is recommended. Above 45°C material may polymerize without hazard. Protect from moisture and extremes of temperature.
SPILLS AND DISPOSAL Not of spillable consistency. Clean up with cloth or tissue moistened with white spirits or allow to cure and remove mechanically . Dispose of at an approved landfill waste disposal site when fully cured.
FIRE / EXPLOSION HAZARD EXTINGUISHING MEDIA:
Fight fires with foam, CO2 , or dry chemical extinguishers. Do not use water. Produces oxides of nitrogen and under certain combustion conditions, traces of hydrogen cyanide could be evolved.
Page 3 of 3
Product Name: Lanko 603 Polyurethane
Davco Construction Materials(Thailand)Co.,ltd.
OTHER INFORMATION Persons known to be hypersensitive (asthma, chronic bronchitis) should not use this product.
CONTACT POINT Technical Services Telephone: 66(0)651 9027-36
Fax: 66(0)2651 8003
The information in this document is given to provide details of known hazards and is prepared from sources believed reliable, and can only be used for safety and health purposes. The Company makes no warranty that it is in all cases correct and sufficient. Prepared along Worksafe Guidelines. This Material Safety Data Sheet can only be copied in its entirety without any alterations.
Page 1/1
YEAR 2004
No. Project Name Location Contractor/Applicator Quantity (Kg.)1 BAAN PASSORN Rangsit, Patumthani Preuksa Real Estate Co.,Ltd 13,543
2 SIAM STEEL FACTORY Rayong Siam Steel Service 9,472
3 GOLF COURSE Bangna-Trad KKY Construction Co., Ltd. 2,909
4 THAI SUMMIT Esie, Rayong Thai Nakano Co.,Ltd 2,714
5 BAAN PREUKPIROM Rangsit, Patumthani Kreeta and Associates 1,580
6 MAXXIS Esie, Rayong Fuji Tech/R.K. Union/Rungfah Serm 1,500
7 PRECAST FACTORY Ladlumkaew, Patumthani Post & Precast Co., Ltd 985
8 CELETICA Lamchabang, Chonburi B.S.Y. Construction Co.,Ltd 650
9 PLASTIC FACTORY Singburi Pro Pet (Thailand) Co.,Ltd 600
10 CF FARM C.F. Farm Co.,Ltd 600
11 TIGER Asian IE, Rayong Nachatr Civil Ltd.,Part 505
12 TOC Hemmaraj IE, Rayong Ppec Engineering Ltd.,Part 500
13 EXCELLENT RUBBER Baanbueng, Chonburi Samson Engineering Co.,Ltd 419
14 KASEMRAJ HOSPITAL Nawamin, BKK R.S.B. Waterproof Co., Ltd. 353
15 PTT Maptaphut Rayong YTC Corporation Ltd.,Part 328
16 FUI 1 Sahapat Sriracha Pitakkij Co.,Ltd 220
17 NOK Amata Bangpakong Golden Floor Development 130
18 CE FACTORY Mabkham, Rayong C.E. Industry Services Co.,Ltd 110
LANKO Project References
Davco Construction Materials (Thailand) Co., Ltd.
603POLYURETHANE
Tel: 66(0) 2651 9027-36 - Fax: 66(0) 2651 8003 - Website: www.lanko.com.au.
CertificationAwarded to
PAREXDAVCO (THAILAND) CO.,LTD.
24 MOOA, TUMBOL KHOKYAE, AMPHOE NONGKHAE, SARABURI18230THAILAND
Bureau Veritas Certification certify that the Management System ofthe above organization has been audited and found to be in accordance with
the requirements of the management system standards detailed below
Standards
ISO 9001:2008
Scope of supply
MANUFACTURING OF TECHNICAL MORTARS
Original Approval Date: 17 March 2009
Subject to the continued satisfactory operation of the organization's Management System,
this certificate is valid until: 16 March 2012
To check this certificate validity please call (+6626704800)
Further clarifications regarding thc scope of this certificate and the applicability of the management system requirements
may be obtained by consulting the organization
Date: 17 March 2009
tM: Bureau Veritas Certification
Using the accreditation
certificate number 008~UKAS
QUALITYMAN,'CEMENT
Certificate Numbcr: TH 09000165
CERTIFICATION AlITIIORIIT, Bme", V"i.., Cw'fi,,'o.. m"il.,d) L<d,1I"h FI=" B""k..k Tow", 2170 N,w P",hl",,' Ro,d,B.,.."", 1I"'yk , B.,"'"k 10310, 'lhill.,dMANAGING OFFICE, B""", Veri.., 0"ilI'",'o" (lM.,il) L"I.16<1>Floo" B.,.kok T"w«, 2170 N,w P",hh..ri Ro,d,B""""", 1I..,yk"",., B",.kok 10310, Thill",d
008