6” LATHE ACCESSORIES (INCLUDES CRAFTSMAN)
10” AND 12” LATHE ACCESSORIES (INCLUDES CRAFTSMAN)#7-805-0552 $450.503-Jaw Universal Chuck, 1-1/2”-8 tpi, 5” dia.
#7-805-0652 $615.783-Jaw Universal Chuck, 1-1/2”-8 tpi, 6” dia.
#7-850-0600 $525.004-Jaw Independent Chuck ,Flat back, 6” dia.#7-871-062 $89.706” Backplate 1-1/2 x 8 tpi
#7-850-0800 $522.504-Jaw Independent Chuck, Flat back, 8” dia.
#7-871-082 $103.508” Backplate 1-1/2 x 8 tpi
#601243 $102.95Drill Chuck 0-1/2” capacity
#7-052-206 Chuck Arbor $7.50
#6821 PORSteady Rest for 12” only: A rigid support for accurately machining long pieces. #6626 PORFollower Rest for 12” only. For work on long, slender rods.
#365 PORFaceplate: 1-1/2”-8tpi, 8-1/2” slotted.#15 PORFaceplate 1-1/2”-8tpi 6” slotted.
TOOLHOLDERSAccept 1/4” bits
#250-1312 Straight $20.50#250-1352 Left Hand $20.50#250-1382 Right Hand $20.50
#386 $77.00 SALE $39.95Cutter Bits: six HSS ready-ground cutter bits;LH turning and facing, RH turning & facing,round nose, 60? V-thread.
#990 PORBoring Tool Holder mounts in tool post, Holds 3/16”, 1/4”, 5/16”, and 3/8” dia. tools.
Boring Tools#6602 5/16” Boring POR#6603A 1/4” Boring POR#6604 3/16” Boring POR#6605 1/4” Internal Thread POR
#380 PORTool Post tool set includes: 3/8” external 60?V-threading; 3/8” external turning; 1/4”internal threading; 3/8”, 5/16”, 1/4”, 3/16”boring; V-block; 2 height spacers.
#6818 PORMetric Threading Attachment: 12 change gears for cutting metric threads from .25 to 7mm.
PAGE 41
Please provide Serial Number andModel Number when ordering.#7-805-0451 $428.823-Jaw Universal Chuck2 sets of jaws, 1”-10tpi, 4” dia.
#7-850-0300 $420.504-Jaw Independent Chuck, Reversible jaws,flatback, 3-1/2” diameter
#7-871-041 4” Backplate 1”-10tpi $78.80
#10102 PORDrill Chuck Kit: 1/2” chuck, arbors MT-1, MT-2
#M6-365 PORFaceplate: 4 slots in faceplate will hold work or drive a lathe dog. 5-1/4” dia.#10105 PORSteady Rest: a rigid support for machining long pieces.#M6-395 PORFollower Rest: insures accurate work on long slender rods.
#7-565-001 $93.40Live Center MT-1: single ball bearing center, test within .005
#7-555-005 $11.1060 degree Tailstock Center, MT-1 shank
#7-555-010 $13.2060 degree Headstock Center, MT-2 shank
#7-405-005 $16.50Adaptor for MT-1 to MT-2
#7-565-002 $126.36 MT-2 Live Center, ball bearing, for highspeed turning.
#7-555-010 Headstock Center, 60? $13.20
#945 PORMilling Cutter Holder with Drawbar: holdersecures milling cutters in headstock spindle.Holds 1/2” shank tools.
#500-A PORMilling Attachment: For face milling, cutting keyways and slots, millingdovetails making dies, molds, etc.
#725 PORCross Slide Stop: clamps to cross slidedovetail.
#6810 PORCarriage Stop: clamps on front bedway. Also fits 6” lathe.
#6822 PORTaper Attachment: cut tapers up to 6” long atone setting.
#750 PORCollet Chuck Handwheel Type: includesdraw-in tube, sleeve, nose cap, use with 3ATcollets.
Many Atlas items are POR “Price on Request”
M6-990 PORBoring Tool Holder mounts in tool post. Holds 3/16”,1/4”, 5/16”, and 3/8” diameter tools.
BORING TOOLS#6602 5/16” Boring POR#6603A 1/4” Boring POR#6604 3/16” Boring POR#6605 1/4” Internal Thread POR
THREADING GEARSETTES#10111 PORFor cutting 5, 6, 8, 9, 10, 11, 11-1/2, 12, 13,14, 16 threads per inch.
#10112 PORFor cutting 16, 18, 20, 22, 24, 27, 28, 32threads per inch.
#10113A PORFor cutting 32, 36, 40, 44, 48, 56, 64 threads per inch.
FEEDING GEARSETTES#10114A POR .0064”, .0055”, .0048 per spindle revolution.
#10115 POR.0042” and .0036” per spindle revolution.
#10116 POR .0024” per spindle revolution.
#10118A Set of 6 Gearsettes PORConsists of one each: #10111, #10112,#10113, #10114, #10115, #10116.
#46-439 PORCup Center for Woodturning, MT-2 shank
#80101 PORSpur Center for Woodturning for driving work mounted between centers, MT-2#M6-945 PORMilling Cutter Holder with Drawbar: holdersecures milling cutters in headstock spindle.Holds 1/2” shank tools.
#M6-500 PORMilling Attachment: Equips lathe for face milling, cutting keyways and slots, millingdovetails, squaring shafts, making dies,, etc.
#6810 PORCarriage Stop: clamps on front bedway. Also fits 10” and 12” lathes.
TOOLHOLDERSAccept 3/16” bits#250-1310 Straight $19.50#250-1350 Left Hand $19.50#250-1380 Right Hand $19.50
#6675 PORCut-Off Tool with blade#6676 Cut-Off Blade Only POR
#M6-386 PORCutter Bit Set: Six HSS 3/16” cutter bitsincluding LH turning and facing, RH turning and facing, round nose and 60? V-thread bit.
#6600 $58.00Atlas Manual of Lathe Operation. Describes ineasy to understand language, 272 pages, 366pictures, 89 charts and tables.
