The ultimate way to upgrade your existing equipment for condition monitoring and predictive maintenance: with only one SIM card the 4G.Router allows to manage Voice and Data transmission, vocal calls and Internet services simultaneously, remote monitoring via LAN and Wi-Fi connectivity.
Thanks to the connection to the FREEWARE COMNet platform, 4G.Router manages the remote control of devices connected to the serial port (RS-232/485) or to the LAN port via DDNS service. 4G.Router is also a PSTN-line emulator, and a wireless access point to offer wi-fi connectivity to connected devices.
• 4G LTE/UMTS/GSM router for lift application
• 4G/3G/2G mobile connection with SIM of any operator
• Access point wireless
• Dynamic DNS client
• Data transmission in standard RS-232, RS-485 and CAN-bus
• 1 LAN port 10/100 MB (RJ45 connector)
• 1 voice port FXS for autodialler
• 2 multi-function programmable relays
• Automatic reboot or by SMS
• Power supply 11 to 26 Vdc
In the IoT environment the 4G.Router plays a main role for lift applications, with the quality and reliability of Esse-ti products.
4G
Cable replacement
4G module with fallback to 3G and 2G
Remote diagnosis and maintenance
DDNSservice
Wi-Fi
Alarms and problems
notifications
Server direct access
Lift remote monitoring
Programmable digital inputs/
outputs
Programmable via web server
Voice & Data transmission
with only 1 SIM
Built-in back up batteries
w w w . e s s e - t i . i tTELECOMUNICAZIONI
100% MADE IN ITALY
4G.RouterThe universal platform for future-proof connectivity
COMNet
Dimensions (without antenna): 95x95x30 mm Weight: 273 g
Technical features MOBILE NETWORK• Module: LTE cat. 1 Penta-Band / UMTS HSPA Dual-Band /
GSM Dual-Band • Frequencies: LTE (700/800/900/1800/2100 MHz) / UMTS
HSPA (900/2100 MHz) / GSM (900/1800 MHz) • LEDs
SPEED• LTE Cat.1 DL: max 10.2 Mbps, UL: max 5.2 Mbps
PORTS• 1 LAN port RJ45 10/100 Mbps• 1 FXS port (for alarm system or analog telephone)• WiFi 2.4 GHz - IEEE 802.11b/g/n (for Access Point, Ad-Hoc
mesk network• 1 SIM card slot 2FF
ANTENNAS• 2 antennas: magnetic base antenna with cable (2 m) and
SMA/m connector • Wi-Fi stylus antenna
FUNCTIONS• Voice calls • Access point wireless (to offer Wi-Fi connectivity to
connected devices) • Dynamic DNS client (to allow the user to remotely access,
using the public Internet, the router itself and all the devices connected to it)
• 2 technological alarm inputs (notification via SMS or CLI call)• 2 relè outputs (local activation or via SMS)• Data transmission (RS-232, RS-485 and CAN-bus standards) • Local programming via telephone (DTMF tones) • Remote programming via SMS• Reading of programming codes via SMS• Caller number display service • CLIP / CLIR • Roaming service management • Battery check (low/dead/replaced battery notification via
SMS) • External power failure control (failure/restore notification via
SMS) • Relay-based notification of external power failure • Relay-based notification of 4G LTE / UMTS / GSM network
loss • Signal level check via local telephone or via SMS • Automatic converter of selected telephone number • Programmable telephone line voltage • Adjustable reception and transmission levels • Customizable timeout of post dialing • Automatic country setting • Automatic reboot under prolonged 4G LTE / UMTS / GSM
signal absence• Remote reboot • Firmware update OTA
POWER SUPPLY• Power supply: from 11 V to 26 V (dc) • Power supply input: terminal block 12/24 Vdc / jack for 230
Vac external adapter Back up battery: NiMH 800 mAh 7,2 V • Expected operation time with a new battery in idle state: 8
hours • Expected operation time with a new battery in conversation
state: 2 hours • External adapter: 100-240 Vac 50-60 Hz input / 12 Vdc 500
mA output / UK / CE mark
CERTIFICATION• CE mark
In the package:• 4G.Router module • Magnetic base antenna with cable (2 m) • Wi-Fi stylus antenna • External adapter: 100-240 Vac 50-60 Hz / 12
Vdc 500 mA / UK Mounting screw • User manual
Weight: 273 g
95 m
m
30 m
m
95 mm95 mm
4G.Router