Download - 4 Equipment Efficiency Quality
![Page 1: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/1.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 1/32
1/32
Equipment Efficiency:Quality and Poka-Yoke (Mistake-
Proof, )Operations Analysis and Improvement
2010 Fall
Dr. Tai-Yue WangIndustrial and Information Management Department
National Cheng Kung University
![Page 2: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/2.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 2/32
2/32
PresentationShigeo Shingo developed a system toimprove inspection tasks with the goal ofguaranteeing 100% quality formanufactured parts.
Leading the charge toward a defect-free
process.
![Page 3: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/3.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 3/32
3/32
PresentationThis chapter will explain inspection
processes based on mistake-proving (called
Poka-Yoke).Complements Statistical Process Control(SPC).
Poka-Yokes are visual and physical toolsthat should be utilized in conjunction withinspection.
This concept will also be presented in thischapter.
![Page 4: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/4.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 4/32
4/32
IntroductionPoka-Yoke is part of the Just-in-time
philosophy and key number 11.Poka-Yoke reduces the defect rate that is
part of the OEE rate.
20
1612119
7
14 5
4
8
15131019
18
17
6
1
2 3
Thinkingrevolution
The 5S
Standardoperations
One-Pieceflow
Poka-Yoke Jidoka
TPM
JUST IN TIME
W or k f or c e
o p t i mi z a t i on
V i s u
a l C on t r o l
LevelingProductionKanban
Multi-functional
workers
SMED
![Page 5: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/5.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 5/32
5/32
Inspection and Statistical Quality
ControlEvery production process generatesdefective products.
The objective for all quality control systems isto reduce the number of defects produced.
Types of defects.
Isolated (a crack appeared on a product).Sequence (repetitive) defects.
![Page 6: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/6.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 6/32
![Page 7: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/7.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 7/32
7/32
A Taxonomy of InspectionTotal or partial.
100% of the products or extrapolating a samplestudy.
Statistical or not statistical.Based on statistical methods or not.
Quantitative or qualitative. Number of elements or appearance of the product.
![Page 8: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/8.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 8/32
8/32
A Taxonomy of InspectionBased on measures or based on functional trials.
Numerical values or without measures.
Sensory or physical.Through human senses or by means of devices.
Subjective or objective.Evaluated by a person based on appearance orevaluated based on a specific measurable feature.
Internal or external.
Within the process or as an independent activity.
![Page 9: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/9.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 9/32
9/32
Inspection and Statistical Quality
ControlInspection should be able to identify defects.
Develop a corrective action to eliminate the errorsor more specifically the cause of the defects.
Otherwise, inspection process will become a pointlessexercise.
![Page 10: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/10.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 10/32
10/32
Inspection and Statistical QualityControl
Many years ago, it was believed that the only
way of insuring the quality of allmanufactured products was to inspect all ofthe parts - 100% inspection.
100% inspection does not result in defect free products to the customer.
![Page 11: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/11.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 11/32
11/32
Inspection and Statistical QualityControl
To avoid this problem and reduceinspection cost, it is possible to duplicatethe inspections.
How many control stages would be necessaryto guarantee the quality of the entire
manufactured lot?
![Page 12: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/12.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 12/32
12/32
Inspection and Statistical QualityControl
Using this procedure, it is not possible toavoid product defects in an efficient way.
Statistical quality control techniques (SQC)seem to be the right alternative.
Some percentage of defects is always accepted.
![Page 13: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/13.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 13/32
13/32
Inspection and Statistical QualityControl
A high defect production rate (high defectlevel) can be deadly for a company well
being.It is very important to eliminate or capture alldefective parts before they reach the market.
Shingo utilizes the term SQC.SQC is a term that today has become obsolete.SQC has been replace by SPC.
![Page 14: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/14.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 14/32
14/32
From SQC to Zero defects
Shingo introduced new ways of carrying outinspection processes that were based onSQC.
The inspection process evolution should besimilar to the historical evolution of these
methods.
![Page 15: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/15.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 15/32
![Page 16: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/16.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 16/32
16/32
From SQC to Zero defects
Therefore, an inspection process, which is based on control charts, does not reduce thefactory defective rate.
It only detects defects.
![Page 17: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/17.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 17/32
![Page 18: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/18.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 18/32
18/32
Poka-Yoke
The Poka-Yoke concept was created by Shingo.“fool - proof devices” -> Poka- Yoke “mistake - proving”
To consider an inspection device as a Poka-Yoke.Ingenious, simple and cheap.
Several Poka-Yoke devices can be found in ourdaily life activities.Recording protection window on floppy disks
![Page 19: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/19.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 19/32
19/32
Poka-Yoke
Poka-Yoke systems can be used in a company inorder to mistake proof activities.
Automatic part feeders.Poka-Yokes can reduce undesired workload components.
It is possible to separate parts with different
specifications.
![Page 20: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/20.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 20/32
20/32
Poka-Yoke
Poka-Yoke devices such as Go-no Go devices areutilized in order to avoid inspections based ontrials.It is not always possible to design a Poka-Yoke tocarry out 100% of the inspection.
![Page 21: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/21.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 21/32
21/32
Self-check and successive checksystems
Self-check procedure.The worker who produces the part is the sameworker that carries out the inspection.
This system is the most efficient one.The worker obtains immediate feedback.
Criticizing one’s own performance may not be totallyobjective.
![Page 22: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/22.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 22/32
22/32
Self-check and successive checksystems
Successive check. Next worker will typically conduct the inspectiontask.
Can reduce the defect rate by as much as one fifth of theinitial value in about one month.
It is necessary to fix 2 or 3 check points.In the beginning of this checking procedure, the defect rate willincrease.
![Page 23: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/23.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 23/32
![Page 24: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/24.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 24/32
24/32
Source inspection
These techniques reduce the defect rate.Do not eliminate the error(s).
Causal relationship between errors and defects.If the error source is eliminated, errors will never becomedefects.
Error Defect Information
Feedback
Error Information
Feedback
![Page 25: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/25.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 25/32
![Page 26: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/26.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 26/32
26/32
Poka-Yoke design methodology
Three suggested methods.Weight, the dimensions or the shape.
![Page 27: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/27.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 27/32
27/32
Poka-Yoke design methodology
The use of meters/counters, spare piecesmethod or a fixed sequence in the assembly
process
![Page 28: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/28.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 28/32
28/32
Poka-Yoke design methodology
Use technology to designthe Poka-Yoke devices.
Contact mechanisms.Limit switches.
Mechanisms without contact.
Sensors.Meters/counters.
![Page 29: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/29.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 29/32
29/32
Poka-Yoke examplesImproper parts (extra material) can break orotherwise adversely affect the tool of the
following process.The introduction of a mechanical blade stop canredirect the parts.It is possible to avoid the line from stopping byusing a “size limit” Poka Yoke .
![Page 30: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/30.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 30/32
![Page 31: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/31.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 31/32
31/32
Poka-Yoke examples
A simple slot in the conveyor line can avoid anincorrect product.
Without the utilization of a Poka-Yoke, filling materialcan be wasted and a major spillage can occur.With the Poka-Yoke the line will not stop and the
improperly oriented parts will fall to collector box
![Page 32: 4 Equipment Efficiency Quality](https://reader034.vdocuments.us/reader034/viewer/2022052608/577ccfc91a28ab9e7890922e/html5/thumbnails/32.jpg)
8/12/2019 4 Equipment Efficiency Quality
http://slidepdf.com/reader/full/4-equipment-efficiency-quality 32/32
32/32
Summary
The chapter had the primary objective to present oneof the many quality related improvement tools: The
Poka-Yoke (mistake-proving devices). The Leanmanufacturing philosophy considers this tool as oneof the pillars to improve the overall equipment
efficiency. The chapter has presented severalexamples of this kind of devices showing that inorder for a device to be considered as a Poka-Yokeit must be ingenious, simple and cheap.