4811
2 · 0
903-
1.0
· D
E-EN
Katalog Anschlusstechnik
Vollständige Dokumentation zu
allen Produkten, die in diesem
Prospekt dargestellt sind.
Catalog Connection technology
Comprehensive documentation of
all products presented in this flyer.
Steckverbinder für 3G/4G-Mobilfunknetzwerke
Connectors for 3G/4G Mobile Radio Networks
Lumberg Connect GmbHIm Gewerbepark 258579 SchalksmühleGERMANYPhone +49 (0) 23 55 - 83-12 37Fax +49 (0) 23 55 - 83-47 12 [email protected]
www.lumberg.com
Germany, Headquarter
Lumberg Ltd.Mount Road, HighclereNewbury, Berkshire RG 20 9QZGREAT BRITAINPhone +44 (0) 16 35 - 25 53 13Fax +44 (0) 16 35 - 25 41 [email protected]
Lumberg SARL12b Rue de Mulhouse68180 Horbourg-WihrFRANCEPhone +33 (0) 3 89 71 98 00Fax +33 (0) 3 89 71 98 [email protected]
Great Britain France
Lumberg Asia Pacific Pte. Ltd.26 Ayer Rajah Crescent # 05-06Ayer Rajah Industrial EstateSingapore 139944SINGAPOREPhone +65 - 67 76 87 55Fax +65 - 67 76 87 [email protected]
Singapore
Lumberg Electronics(Shanghai) Ltd.Jin Qiao Export Processing Zone1765 Chuan Qiao Road, T 40-5Shanghai Pudong 201206CHINA Phone +86 (0) 21 5899 7373Fax +86 (0) 21 5899 [email protected]
China
Lumberg, Inc.425 Southlake BoulevardSuite 9BRichmond VA 23236USAPhone +1 804 423 8969Fax +1 804 379 [email protected]
USAPoland
customized solutions®customized solutions®Lumberg Connect
Komplettes Steckverbinder-Programm, mit Löt- oderCrimpkontakten, Einbauteile invielen Ausführungen
Complete connector program,solder or crimp connection,various types of receptacles
Individuell konfektionierteKabelsätze, z.B. mit direktge-steckten RAST-2.5- oder mitMultimodul™-Steckverbindern
Custom-made cable assemblies,e.g. with direct RAST 2.5 orwith Multimodul™ connectors
Stecker und Kupplung, 360° geschirmt
Male and female connector,360° shielded
Steckverbinder nach AISG-SpezifikationConnectors according to AISG specification
• Steckverbinder nachAISG-Spezifikationv1.1/2.0 und
• nach IEC 60130-9 • Schutzart IP 67• salznebelbeständig• UV-beständig• Leiterquerschnitt bis
0,75 mm2 (AWG 18)• 8- und 6-polige Steck-
verbinder, weiterePolbilder auf Anfrage
• connectors compliantwith AISG specificationv1.1/2.0 and
• with IEC 60130-9• protection rating IP 67• salt mist resistant• UV resistant• wire section up to
0.75 mm2 (AWG 18)• 8 and 6 pole versions,
additional pin configu-rations upon request
Steckverbinder nach AISG-SpezifikationConnectors according to AISG specification
• Steckverbinder nach AISG und IEC 60130-9
• Verbindung zwischen den Systemkomponenten:Basisstation, Fernsteuerelemente (RET) der Anten-nen, Fernspeiseweichen (Bias Tees), mastmontierteVerstärker (TMA), Überspannungsableiter usw.
• millionenfach bewährt
• connectors compliant with AISG and IEC 60130-9
• connection between the system components: basestation, antenna remote electrical tilts (RET), biastees, tower-mounted amplifiers (TMA), surge pro-tections etc.
• proved in Millions
-1
Montageschlüssel
Wrenches
Schutzkappen, mit oder ohneKette
Protecting caps, with or withoutchain
Schirmring (bei Frontmontage)
Shielding ring (for use withfront mounted parts)
Einbaustecker mit Lötanschlüs-sen, für Front- oder Rückseiten-montage
Chassis plugs with solder con-nection, for front or rear mount-ing
Einbaustecker für Leiterplatten,für Front- oder Rückseiten-montage
Chassis plugs for printed circuitboards, for front or rear mount-ing
Einbaukupplungen mit Lötan-schlüssen, für Front- oder Rück-seitenmontage
Chassis sockets with solder connection, for front or rearmounting
Rundsteckverbinder mit Schraub-verschluss, 360° geschirmt, mitLötanschlüssen
Circular connectors with treadedjoint, 360° shielded, with solderconnection
Einbausteckverbinder fürLeiterplatten, mit Massekon-takt, für Rückseitenmontage
Chassis connectors for printedcircuit boards, with groundcontact, for rear mounting
0332-1 0322-1
0316-1 0317-10316-2 0317-2
0314-1 0315-10314-2 0315-2
0304-1 0305-10304-2 0305-2
031798-2 030798-2
Einbausteckverbinder, mit Kabelkonfektioniert und im Löt-bereich umspritzt
Chassis connectors, with cablesand overmolded solder area
dicht im verschraubtenZustand mit Gegen-stücksealed when counter-parts are screwed down
dicht im ungestecktenZustand (zusätzlich)Sealed When UnMated (in addition)
IP 67
0380 ZMS 20
Handzange und Verarbeitungs-maschine für Crimpkontakte
Manual tongs and harnessingmachine for crimp contacts
CZB03 CM03
Einbaukupplungen für Leiter-platten, für Front- oder Rück-seitenmontage
Chassis sockets for printed circuit boards, for front or rearmounting
0306-1 0307-10306-2 0307-2
0315-1 U 0305-1 U
03...
-203
...-1
03...
-203
...-1
03...
-203
...-1
03...
-2
Flansch-Einbausteckverbindermit Lötanschlüssen
Flange chassis connectors withsolder connection
-2
Halbautomat für Crimpkontak-te, mit Abisoliervorrichtung, so-wie Werkzeug zur Verwendungmit geeigneten Antriebsmaschi-nen
Semiautomatic harnessing ma-chine for crimp contacts, withstripper, as well as tool for usewith suitable operating machines
CAS03 CAW03
Flansch-Einbaukupplung-Leer-gehäuse für Crimpkontakte
Empty flange chassis sockethousing for crimp contacts
SWUM™
SWUM™Sealed when unmated
0318-1 0308-10318-2 0308-2
036297
Rundsteckverbinder-Leerge-häuse mit Schraubverschluss,Stecker und Kupplung, 360°geschirmt, für Crimpkontakte
Empty circular connector hou-sings with treaded joint, plugand socket, 360° shielded, forcrimp contacts
0365 0360
Crimpkontakte, Stift undBuchse
Crimp contacts, pin and bush
0369 V109 0364 V109
Einbaukupplung-Leergehäusefür Crimpkontakte, für Front-oder Rückseitenmontage
Empty chassis socket housingfor crimp contacts, for front orrear mounting
0362 0363
0383 - 0381 0382
-2
-1
08-1 06-1
03...
-203
...-1
Components for themobile networksinfrastructure
4811
2 · 0
903-
1.0
· D
E-EN
Katalog Anschlusstechnik
Vollständige Dokumentation zu
allen Produkten, die in diesem
Prospekt dargestellt sind.
Catalog Connection technology
Comprehensive documentation of
all products presented in this flyer.
Steckverbinder für 3G/4G-Mobilfunknetzwerke
Connectors for 3G/4G Mobile Radio Networks
Lumberg Connect GmbHIm Gewerbepark 258579 SchalksmühleGERMANYPhone +49 (0) 23 55 - 83-12 37Fax +49 (0) 23 55 - 83-47 12 [email protected]
www.lumberg.com
Germany, Headquarter
Lumberg Ltd.Mount Road, HighclereNewbury, Berkshire RG 20 9QZGREAT BRITAINPhone +44 (0) 16 35 - 25 53 13Fax +44 (0) 16 35 - 25 41 [email protected]
Lumberg SARL12b Rue de Mulhouse68180 Horbourg-WihrFRANCEPhone +33 (0) 3 89 71 98 00Fax +33 (0) 3 89 71 98 [email protected]
Great Britain France
Lumberg Asia Pacific Pte. Ltd.26 Ayer Rajah Crescent # 05-06Ayer Rajah Industrial EstateSingapore 139944SINGAPOREPhone +65 - 67 76 87 55Fax +65 - 67 76 87 [email protected]
Singapore
Lumberg Electronics(Shanghai) Ltd.Jin Qiao Export Processing Zone1765 Chuan Qiao Road, T 40-5Shanghai Pudong 201206CHINA Phone +86 (0) 21 5899 7373Fax +86 (0) 21 5899 [email protected]
China
Lumberg, Inc.425 Southlake BoulevardSuite 9BRichmond VA 23236USAPhone +1 804 423 8969Fax +1 804 379 [email protected]
USAPoland
customized solutions®customized solutions®Lumberg Connect
Komplettes Steckverbinder-Programm, mit Löt- oderCrimpkontakten, Einbauteile invielen Ausführungen
Complete connector program,solder or crimp connection,various types of receptacles
Individuell konfektionierteKabelsätze, z.B. mit direktge-steckten RAST-2.5- oder mitMultimodul™-Steckverbindern
Custom-made cable assemblies,e.g. with direct RAST 2.5 orwith Multimodul™ connectors
Stecker und Kupplung, 360° geschirmt
Male and female connector,360° shielded
Steckverbinder nach AISG-SpezifikationConnectors according to AISG specification
• Steckverbinder nachAISG-Spezifikationv1.1/2.0 und
• nach IEC 60130-9 • Schutzart IP 67• salznebelbeständig• UV-beständig• Leiterquerschnitt bis
0,75 mm2 (AWG 18)• 8- und 6-polige Steck-
verbinder, weiterePolbilder auf Anfrage
• connectors compliantwith AISG specificationv1.1/2.0 and
• with IEC 60130-9• protection rating IP 67• salt mist resistant• UV resistant• wire section up to
0.75 mm2 (AWG 18)• 8 and 6 pole versions,
additional pin configu-rations upon request
Steckverbinder nach AISG-SpezifikationConnectors according to AISG specification
• Steckverbinder nach AISG und IEC 60130-9
• Verbindung zwischen den Systemkomponenten:Basisstation, Fernsteuerelemente (RET) der Anten-nen, Fernspeiseweichen (Bias Tees), mastmontierteVerstärker (TMA), Überspannungsableiter usw.
• millionenfach bewährt
• connectors compliant with AISG and IEC 60130-9
• connection between the system components: basestation, antenna remote electrical tilts (RET), biastees, tower-mounted amplifiers (TMA), surge pro-tections etc.
• proved in Millions
-1
Montageschlüssel
Wrenches
Schutzkappen, mit oder ohneKette
Protecting caps, with or withoutchain
Schirmring (bei Frontmontage)
Shielding ring (for use withfront mounted parts)
Einbaustecker mit Lötanschlüs-sen, für Front- oder Rückseiten-montage
Chassis plugs with solder con-nection, for front or rear mount-ing
Einbaustecker für Leiterplatten,für Front- oder Rückseiten-montage
Chassis plugs for printed circuitboards, for front or rear mount-ing
Einbaukupplungen mit Lötan-schlüssen, für Front- oder Rück-seitenmontage
Chassis sockets with solder connection, for front or rearmounting
Rundsteckverbinder mit Schraub-verschluss, 360° geschirmt, mitLötanschlüssen
Circular connectors with treadedjoint, 360° shielded, with solderconnection
Einbausteckverbinder fürLeiterplatten, mit Massekon-takt, für Rückseitenmontage
Chassis connectors for printedcircuit boards, with groundcontact, for rear mounting
0332-1 0322-1
0316-1 0317-10316-2 0317-2
0314-1 0315-10314-2 0315-2
0304-1 0305-10304-2 0305-2
031798-2 030798-2
Einbausteckverbinder, mit Kabelkonfektioniert und im Löt-bereich umspritzt
Chassis connectors, with cablesand overmolded solder area
dicht im verschraubtenZustand mit Gegen-stücksealed when counter-parts are screwed down
dicht im ungestecktenZustand (zusätzlich)Sealed When UnMated (in addition)
IP 67
0380 ZMS 20
Handzange und Verarbeitungs-maschine für Crimpkontakte
Manual tongs and harnessingmachine for crimp contacts
CZB03 CM03
Einbaukupplungen für Leiter-platten, für Front- oder Rück-seitenmontage
Chassis sockets for printed circuit boards, for front or rearmounting
0306-1 0307-10306-2 0307-2
0315-1 U 0305-1 U03
...-2
03...
-103
...-2
03...
-1
03...
-203
...-1
03...
-2
Flansch-Einbausteckverbindermit Lötanschlüssen
Flange chassis connectors withsolder connection
-2
Halbautomat für Crimpkontak-te, mit Abisoliervorrichtung, so-wie Werkzeug zur Verwendungmit geeigneten Antriebsmaschi-nen
Semiautomatic harnessing ma-chine for crimp contacts, withstripper, as well as tool for usewith suitable operating machines
CAS03 CAW03
Flansch-Einbaukupplung-Leer-gehäuse für Crimpkontakte
Empty flange chassis sockethousing for crimp contacts
SWUM™
SWUM™Sealed when unmated
0318-1 0308-10318-2 0308-2
036297
Rundsteckverbinder-Leerge-häuse mit Schraubverschluss,Stecker und Kupplung, 360°geschirmt, für Crimpkontakte
Empty circular connector hou-sings with treaded joint, plugand socket, 360° shielded, forcrimp contacts
0365 0360
Crimpkontakte, Stift undBuchse
Crimp contacts, pin and bush
0369 V109 0364 V109
Einbaukupplung-Leergehäusefür Crimpkontakte, für Front-oder Rückseitenmontage
Empty chassis socket housingfor crimp contacts, for front orrear mounting
0362 0363
0383 - 0381 0382
-2
-1
08-1 06-1
03...
-203
...-1
Components for themobile networksinfrastructure
• Steckverbinder nachAISG-Spezifikationv1.1/2.0 und
• nach IEC 60130-9 • Schutzart IP 67• salznebelbeständig• UV-beständig• Leiterquerschnitt bis
0,75 mm2 (AWG 18)• 8- und 6-polige Steck-
verbinder, weiterePolbilder auf Anfrage
• connectors compliantwith AISG specificationv1.1/2.0 and
• with IEC 60130-9• protection rating IP 67• salt mist resistant• UV resistant• wire section up to
0.75 mm2 (AWG 18)• 8 and 6 pole versions,
additional pin configu-rations upon request
Steckverbinder nach AISG-SpezifikationConnectors according to AISG specification
• Steckverbinder nach AISG und IEC 60130-9
• Verbindung zwischen den Systemkomponenten:Basisstation, Fernsteuerelemente (RET) der Anten-nen, Fernspeiseweichen (Bias Tees), mastmontierteVerstärker (TMA), Überspannungsableiter usw.
• millionenfach bewährt
• connectors compliant with AISG and IEC 60130-9
• connection between the system components: basestation, antenna remote electrical tilts (RET), biastees, tower-mounted amplifiers (TMA), surge pro-tections etc.
• proved in Millions
-1
Montageschlüssel
Wrenches
Schutzkappen, mit oder ohneKette
Protecting caps, with or withoutchain
Schirmring (bei Frontmontage)
Shielding ring (for use withfront mounted parts)
Einbaustecker mit Lötanschlüs-sen, für Front- oder Rückseiten-montage
Chassis plugs with solder con-nection, for front or rear mount-ing
Einbaustecker für Leiterplatten,für Front- oder Rückseiten-montage
Chassis plugs for printed circuitboards, for front or rear mount-ing
Einbaukupplungen mit Lötan-schlüssen, für Front- oder Rück-seitenmontage
Chassis sockets with solder connection, for front or rearmounting
Rundsteckverbinder mit Schraub-verschluss, 360° geschirmt, mitLötanschlüssen
Circular connectors with treadedjoint, 360° shielded, with solderconnection
Einbausteckverbinder fürLeiterplatten, mit Massekon-takt, für Rückseitenmontage
Chassis connectors for printedcircuit boards, with groundcontact, for rear mounting
0332-1 0322-1
0316-1 0317-10316-2 0317-2
0314-1 0315-10314-2 0315-2
0304-1 0305-10304-2 0305-2
031798-2 030798-2
Einbausteckverbinder, mit Kabelkonfektioniert und im Löt-bereich umspritzt
Chassis connectors, with cablesand overmolded solder area
dicht im verschraubtenZustand mit Gegen-stücksealed when counter-parts are screwed down
dicht im ungestecktenZustand (zusätzlich)Sealed When UnMated (in addition)
IP 67
0380 ZMS 20
Handzange und Verarbeitungs-maschine für Crimpkontakte
Manual tongs and harnessingmachine for crimp contacts
CZB03 CM03
Einbaukupplungen für Leiter-platten, für Front- oder Rück-seitenmontage
Chassis sockets for printed circuit boards, for front or rearmounting
0306-1 0307-10306-2 0307-2
0315-1 U 0305-1 U
03...
-203
...-1
03...
-203
...-1
03...
-203
...-1
03...
-2
Flansch-Einbausteckverbindermit Lötanschlüssen
Flange chassis connectors withsolder connection
-2
Halbautomat für Crimpkontak-te, mit Abisoliervorrichtung, so-wie Werkzeug zur Verwendungmit geeigneten Antriebsmaschi-nen
Semiautomatic harnessing ma-chine for crimp contacts, withstripper, as well as tool for usewith suitable operating machines
CAS03 CAW03
Flansch-Einbaukupplung-Leer-gehäuse für Crimpkontakte
Empty flange chassis sockethousing for crimp contacts
SWUM™
SWUM™Sealed when unmated
0318-1 0308-10318-2 0308-2
036297
Rundsteckverbinder-Leerge-häuse mit Schraubverschluss,Stecker und Kupplung, 360°geschirmt, für Crimpkontakte
Empty circular connector hou-sings with treaded joint, plugand socket, 360° shielded, forcrimp contacts
0365 0360
Crimpkontakte, Stift undBuchse
Crimp contacts, pin and bush
0369 V109 0364 V109
Einbaukupplung-Leergehäusefür Crimpkontakte, für Front-oder Rückseitenmontage
Empty chassis socket housingfor crimp contacts, for front orrear mounting
0362 0363
0383 - 0381 0382
-2
-1
08-1 06-1
03...
-203
...-1
Components for themobile networksinfrastructure
4811
2 · 0
903-
1.0
· D
E-EN
Katalog Anschlusstechnik
Vollständige Dokumentation zu
allen Produkten, die in diesem
Prospekt dargestellt sind.
Catalog Connection technology
Comprehensive documentation of
all products presented in this flyer.
Steckverbinder für 3G/4G-Mobilfunknetzwerke
Connectors for 3G/4G Mobile Radio Networks
Lumberg Connect GmbHIm Gewerbepark 258579 SchalksmühleGERMANYPhone +49 (0) 23 55 - 83-12 37Fax +49 (0) 23 55 - 83-47 12 [email protected]
www.lumberg.com
Germany, Headquarter
Lumberg Ltd.Mount Road, HighclereNewbury, Berkshire RG 20 9QZGREAT BRITAINPhone +44 (0) 16 35 - 25 53 13Fax +44 (0) 16 35 - 25 41 [email protected]
Lumberg SARL12b Rue de Mulhouse68180 Horbourg-WihrFRANCEPhone +33 (0) 3 89 71 98 00Fax +33 (0) 3 89 71 98 [email protected]
Great Britain France
Lumberg Asia Pacific Pte. Ltd.26 Ayer Rajah Crescent # 05-06Ayer Rajah Industrial EstateSingapore 139944SINGAPOREPhone +65 - 67 76 87 55Fax +65 - 67 76 87 [email protected]
Singapore
Lumberg Electronics(Shanghai) Ltd.Jin Qiao Export Processing Zone1765 Chuan Qiao Road, T 40-5Shanghai Pudong 201206CHINA Phone +86 (0) 21 5899 7373Fax +86 (0) 21 5899 [email protected]
China
Lumberg, Inc.425 Southlake BoulevardSuite 9BRichmond VA 23236USAPhone +1 804 423 8969Fax +1 804 379 [email protected]
USAPoland
customized solutions®customized solutions®Lumberg Connect
Komplettes Steckverbinder-Programm, mit Löt- oderCrimpkontakten, Einbauteile invielen Ausführungen
Complete connector program,solder or crimp connection,various types of receptacles
Individuell konfektionierteKabelsätze, z.B. mit direktge-steckten RAST-2.5- oder mitMultimodul™-Steckverbindern
Custom-made cable assemblies,e.g. with direct RAST 2.5 orwith Multimodul™ connectors
Stecker und Kupplung, 360° geschirmt
Male and female connector,360° shielded
Steckverbinder nach AISG-SpezifikationConnectors according to AISG specification