-
7/28/2019 3 WECON HMI and PLC Application in Charging Machine
1/7
http://www.we-con.com.cn/en/index.asp
WECON HMI and PLC application in charging machine
1) IntroCharing machine is the machinery that is used for automatic feeding and evenly
loading.as the picture show,it is the charing machine,the bottom right corner part is for th
e charging process,beside,it is the control box;the upper left corner part is formaterial
pressing and feeding process,.below part is for delivery process.
Charing machine
Below is the close-up view of control box.This machine use WECON 4.3 inch HMI
and 20 I/O PLC control.
Fuzhou Wecon Co.Ltd. Fujian Province China. 1
http://www.we-con.com.cn/en/index.asphttp://www.we-con.com.cn/en/index.asp -
7/28/2019 3 WECON HMI and PLC Application in Charging Machine
2/7
http://www.we-con.com.cn/en/index.asp
features ofcontrol box
2) Features
1Charging machine has manual and automatic switching,the user can switch it onits own.
2HMI offer intuitive touch experience to customers,PLC achieve stable operation.3HMI is responsible for the setting of relevant parameters, manual and automatic s
witching of production line and relevant bottom control.
PLC is for communicating with HMI, external input signal acquisition and freque
ncy converter control, output pressure machine, etc.
3) Component1HMI part:The below picture is manual operation interface. While the operation is
in the manual, the user can manually select binder, feeding and conveying,simply click
again to stop the corresponding button. each screen has an emergency stop icon to
indicates the current status in the emergency stop
Fuzhou Wecon Co.Ltd. Fujian Province China. 2
http://www.we-con.com.cn/en/index.asphttp://www.we-con.com.cn/en/index.asp -
7/28/2019 3 WECON HMI and PLC Application in Charging Machine
3/7
http://www.we-con.com.cn/en/index.asp
Manual operation
The below picture is automatic running interface,used to switch the manual and
automatic operation.
Fuzhou Wecon Co.Ltd. Fujian Province China. 3
http://www.we-con.com.cn/en/index.asphttp://www.we-con.com.cn/en/index.asp -
7/28/2019 3 WECON HMI and PLC Application in Charging Machine
4/7
http://www.we-con.com.cn/en/index.asp
Automation Screen
The below picture is the parameter setting interface,set the register value of PLC,make
the PLC control more accurate.
Fuzhou Wecon Co.Ltd. Fujian Province China. 4
http://www.we-con.com.cn/en/index.asphttp://www.we-con.com.cn/en/index.asp -
7/28/2019 3 WECON HMI and PLC Application in Charging Machine
5/7
http://www.we-con.com.cn/en/index.asp
Parameter setting
2PLC part:Automatic state, the conveyor belt drive loading cup, electric eye detect signals and stop time delay, and then began to material pressing and feeding, after the delay
stop time setted run out,stop pressing material, start deliver,then into the next feeding, aut
omatic operation, the feed automatic, full, stop charging.in automatic mode, manual oper
ation is invalid, interlock that two movement patterns.
The below picture is the signal position anti-shake part in the program,when PLC collect
a rising edge of position signal,the electric eye detection delay time start, if collect falling
edge of the position signal within fixed time,will determine the position signal is invalid;
If time up,but still haven't detect the falling edge, will consider the signal is valid. Thisprogram is mainly aimed at filter the invalid position signal,since due to the conveyor
belt,the loading cups in the process of transport, electric eye often produce invalid stop signal, need to filter, so it is necessary to add the electric eye detection stabilization functio
n.
Fuzhou Wecon Co.Ltd. Fujian Province China. 5
http://www.we-con.com.cn/en/index.asphttp://www.we-con.com.cn/en/index.asp -
7/28/2019 3 WECON HMI and PLC Application in Charging Machine
6/7
http://www.we-con.com.cn/en/index.asp
electric eye detection
The below picture is the button part.HMI and control box both has a button to
control stop or run,one is physical button,the other is software button of HMI, both ofthem realize switching function and influence each other.Therefore adopt a counter,
calculate the times of snapping the button(the times of physical and software button),one
time is ON, two times is OFF.
Button part
4) SummaryIn the industry,charging machine is widely used and especially fine to powder .It can
satisfy the market because of high efficiency and stable.WECON PLC has been on themeasured in the charging machine that meet the process requirements and work stably.
WECON PLC and HMI is used together to make the whole control processed more
Fuzhou Wecon Co.Ltd. Fujian Province China. 6
http://www.we-con.com.cn/en/index.asphttp://www.we-con.com.cn/en/index.asp -
7/28/2019 3 WECON HMI and PLC Application in Charging Machine
7/7
http://www.we-con.com.cn/en/index.asp
intuitive,convenient and got the customers recognition.
Fuzhou Wecon Co.Ltd. Fujian Province China. 7
http://www.we-con.com.cn/en/index.asphttp://www.we-con.com.cn/en/index.asp