AIRCRAFT | NAVIGATION AND SURVEILLANCE SYSTEMS
2020 DMENEXT-GENERATION DISTANCE MEASURING EQUIPMENT
Moog Inc. is a worldwide designer, manufacturer and integrator of mission critical products and systems. Over the past 60 years, we have developed a reputation for delivering innovative solutions for the most challenging civil, military and marine applications. Moog’s product heritage in navigation and surveillance systems is based on supplying innovative solutions to civil aviation authorities and militar y commands worldwide. By the 1980’s, we were supplying comprehensive fixed base, shipboard, mobile and man portable TACAN systems to customers globally.
2020 DME OVERVIEWThe 2020 is one of the world’s most technologically advanced distance measuring equipment available today. Solid state features include DSP technology, hardware monitoring and conservatively rated RF power amplifiers. Pulse shape and spectrum are controlled by an agile digital feedback control loop to keep the signal in space within permissible limits in all operating conditions.
Compliant with all requirements of ICAO Annex 10 and FAA-E-2996, the 2020 DME can be operated independently or in conjunction with other navigational aids such as ILS, CVOR, DVOR, and NDB. The 2020 is offered in a variety of configurations including single or dual transponder, fixed or mobile, and a compact wall mounted version.
REMOTE MAINTENANCE MONITORING (RMM)The 2020 DME has a powerful integrated monitoring and maintenance system which can be displayed on a local PC, remote PC or both. Display screens show operating parameters, overall system status, LRU status, alarm limits, diagnostics and test, amplifier status and transmitter control status.
The 2020 DME features a BITE system which continually monitors and provides alarm indications in the event of module failure, system transfer or shutdown. External test points are configurable from LMM/RMM.
Other RMM features include:
■ Windows compatibility and user password protection ■ Centralized RMM option ■ Up to 400 sites monitored from a central RMM station ■ Full RMM diagnostics and history logging for each site ■ Dial-up/leased line/Ethernet connectivity ■ LAN/Satellite link/Fiber optic connection option ■ Remote flight check capability ■ Auxiliary interface allows user defined sensors to be configured by RMM ■ LRU serial number and build state look-up ■ Checks system performance to ICAO Annex 10 standards
ANTENNA COMPATABILITYThe 2020 DME operates with all standard omnidirectional, unidirectional and bidirectional antennas. We offer a standard solution with an 8 dB gain omnidirectional antenna with dual coupler outputs for high integrity performance. All antennas are lightweight, rugged, fully waterproof and come with a range of mounting adaptors to suit all sites.
LOGISTICS SUPPORTMoog provides global logistics support and technical assistance, including:
■ A customer helpline manned 24 hours a day ■ Support packages for 15-20 years of the whole operational life of
the equipment ■ System installation and training ■ Site survey and system commissioning ■ Safety cases, spares and repairs
Wall mounted low power DME
DME status screens
Mast mounted antenna
Moog Inc.East Aurora, New York
716.652-2000www.moog.com/aircraft
©2018 Moog, Inc. All rights reserved.Product and company names listed are trademarks or trade names of their respective companies. Form 500-739 0318
C
M
Y
CM
MY
CY
CMY
K
Social Media Logos.pdf 1 10/12/17 3:59 PM
Monitored Parameters
Primary The following parameters cause the system to shut down or transfer if out of tolerance:• Reply delay• Reply spacing
Secondary (Upgradeable to Primary)• Frequency• Reply efficiency• Reply width• Output power• Reply rate• Ident
Displayed Parameters on Local and Remote PCs• Reply delay• Transmitter peak power• Transmitter pulse pair spacing• Transmitter pulse count• Receiver reply efficiency• Monitor interrogation pulse count• Monitor interrogation pulse pair spacing• LRU/PCB status• Trend analysis• Diagnostic displays• Data logging/performance history
DimensionsFloor Standing Wall Mounted
Cabinet (dual) 60 cm wide 60 cm wide60 cm deep 62 cm deep192 cm high 77 cm high
Weight 215 kg (dual) 82 kg (dual)205 kg (single) 70 kg (single)
EnvironmentalTemperature Operating: -10°C to +55°C
Storage: -30°C to +60°CHumidity 0% to 95% RH (non-condensing)Reliability
Field MTBO better than 100,000 hrsMTTR 15 minutes (typical)
Applicable StandardsR&TTE Directive 1999/5/EC, Article 3.1(a), Article 3.1 (b) and Article 3.2ICAO Annex 10MIL-HDBK-217UK CAA CAP670Eurocae ED 57FAA-E-2996ISO 9001:2000 Plus TickITISO 9001 for hardwareISO 9000-3 for softwareFAA.STD.0.16A
System ConfigurationSingle or dual systems. Power output configurations from less than 100W to 1 kW full band
TransmitterPower Output 100 watt to 1kW versionsFrequency 962 MHz - 1213 MHzFrequency Stability ± 0.001%Channels 252 (X and Y)RF Pulse Spectrum,Spurious Outputsand Harmonics
ICAO Annex 10
Pulse Rise and Fall Time 2.5 μs ± 0.5 μsPulse Duration 3.5 μs ± 0.5 μs
Pulse Pair Spacing X channel - 12 μs ± 0.1 μsY channel - 30 μs ± 0.1 μs
Ident ICAO Annex 10Ident Rate 1350 ± 25 pulse pairs per secondPulse Repetition Rate 700 - 5400 pulse pairs per second
System Reply Delay X channel - 50 μs ± 15 μsY channel - 56 μs ± 9 μsStep size 0.025 μs
Distance Accuracy ± 50 feet (± 15 meters)Reply Delay Time Stability <± 0.1 μsReceiverFrequency 1025 MHZ to 1150 MHz
(1 MHz channels)
Sensitivity -91 dBm for 70% reply efficiency(-94 dBm typical)
Adjacent Channel and IFFrequency Rejection
83 dBm minimum
Spurious RejectionReceiver Decodes
75 dBm min for spurious frequencies
(N) Mode X channel - 12 μs ± 1 μsY channel - 36 μs ± 1 μs
Aircraft Handling Capacity 200 interrogatorsGeneralStatus Indication Full local and remote indication
System Monitoring (BITE) Complete system monitoring bymicroprocessors including statusoutput for each LRU
Remote/Local ControlInterface
PC for local and remote operation
Power Supply AC - 115/230 VAC ±15%45/65HzDC - 24/28 VDC
Power Consumption 210 watts (nom) for 100 W310 watts (nom) for 1 kW
MonitorInterrogation SignalGenerator
Center frequency fo to fo ± 900 KHzin 100 KHz steps
2020 DME TECHNICAL SPECIFICATIONS