ECKER®
GSM®
SEALS FORHYDRAULIC &
PNEUMATIC SYSTEMS english
H
Edition 01/2017
more than a hundred
years of knowledge
in sealing Business
HECKER®
GSM®-DICHTUNGEN UND FORMTEILE– Pneumatik- und Hydraulikdichtungen– Stangen- und Zylinderdichtungen– Nutringe und Lippenringe– Kompaktdichtringe– Kegelformdichtsätze– PTFE-Euroset/Duoset-Dichtsätze– Abstreifringe– Präzisions-O-Ringe nach DIN 3771– Sonderdichtungen– Formteile– Gummi-Metallverbindungen
Werkstoffe:Sämtliche gängigen Elastomerwerkstoffe aus eigener Entwicklung wie NBR, EPDM, FKM,HNBR, VMQ, ACM und CR oder nach Ihren Rezepturen
Für eine Reihe von Werkstoffen liegen Freigaben vor z. B. nach KTW, FDA und BGA
Gummi-GewebewerkstoffeBitte Einzelprospekt anfordern
HECKER®
GSM®-SEALS ANDMOULDINGS– pneumatic and hydraulic seals– piston and rod seals– U-ring and lip seals– compact sealing rings– V-packings sealing sets– PTFE-Euroset/Duroset- sealing sets– scrapers– precision o-rings according to DIN 3771– special seals – mouldings – rubber-metal-connections
Materials:All generally available elastomers, self-developed elastomers as NBR, EPDM, FKM, HNBR,
KTW, FDA and BGA certificates available for several materials
Rubber-coated fabrics
– joints pneumatiques et hydrauliques– joints pour pistons et tiges de piston– joints en U à lèvres– joints compacts– jeux de joints coniques– joints PTFE-Euroset/Duoset– racleurs– joints toriques de précision selon DIN 3771– joints spéciaux, pièces moulées– jointures métallo-caoutchouc
Matériaux:Tous les Elastomères les plus utilisés, des ainsi que ceux de notre recherche comme NBR, EPDM, FKM, HNBR, VMQ, ACM et CR ou selon votre formule
Certifications FDA, KTW, BGA et autres disponibles pour plusieurs matériaux
Tissus caoutchoutés
– guarnizioni pneumatiche e idrauliche– guarnizioni per pistoni e aste– guarnizioni a U e guarnizioni a labbro– guarnizioni compatte– guarnizioni coniche– guarnizioni PTFE-Euroset/Duoset– raschiatori– anelli OR di precisione secondo DIN 3771– guarnizioni speciali – pezzi sagomati – guarnizioni gomma-metallo
Materiali:Tutti gli elastomeri, elastomeri di proprio sviluppó come NBR, EPDM, FKM, HNBR, VMQ, ACM e CR o degli elastomeri secondo Vostra ricetta
Certificati FDA, KTW, BGA ed altri disponibili per differenti materiali
Tessuto gommato
SEALING
QUESTIONS
ASKHECKER??!
GSM®
PRODUCTS
HECKER®
GUARNIZIONI GSM®
E PEZZI SAGOMATI
HECKER®
JOINTS GSM® ET PIECES MOULÉES
3
The data indicated in our catalogue are based on experimental values concerning
fabrication, bench performance and application of the sealing elements. In view of the
large number of parameters and boundary conditions, the generally valid application
limits can vary greatly so that the suitability for a particular application must be confir-
med by practical tests in the user’s works. No guarantee or liability can be assumed
for the validity of our recommendation in individual cases.
ROD AND CYLINDERSEALS FOR HYDRAULICAND PNEUMATICSYSTEMS
SCRAPERS
GUIDE ELEMENTS
O-RINGS, STARRINGS,RECTANGULAR PROFILERINGS
SPECIAL SEALS
ELASTOMER AND POLY-URETHANE / METALCOMPUNDSMOULDINGS OFELASTOMER AND POLYURETHANE
SEMI-FINISHED PRODUCTS
LUBRICANTS
FORMS MATERIALS GENERAL TABLEU-Rings Elastomers Page 5
lip seals Elastomer-impregnated fabrics
compact rod seals Polyurethande
V-packings PTFE-Elastomer combinations
PTFE slide rings with O-Ring clamping element
seals for pneumatic systems
FORMS MATERIALS GENERAL TABLEoil wiper rings Elastomer Page 117
flat-type scrapers Polyurethane
FORMS MATERIALS GENERAL TABLErod and cylinder guide elements modified Euraflon® PTFE Page 121
ready for installation
sealing strip (yard ware)
FORMS MATERIALS GENERAL TABLEO-rings Elastomer Page 124
starrings Polyurethane
rectangular profile rings
• fitting seals for ball valves, valves, slide gates, double seat valves
• seals for butterfly valves
• seals for fittings, spindles and shafts
• rod seals for gas springs and shock absorbers
• standstill seals for pumps and agitators
• rectangular and oval packings
• OR frames for rotary pistons
• seals for rotary systems
• special seals for the car industry
Furthermore we can produce seals according to your drawings and samples to develop the appropriate seal for your
special filed of application made from elastomers, elastomer-impregnated fabrics and polyurethane materials.
Elastomer seals are also applicable in the field of food processing.
Linings for wheels and rollers, transport and scraper gibs, delivery plungers for concrete and sludge pumps, counter
punching, counter punching pallets for paper and cardboard cutting machines, buffers etc.
Spring and buffer elements, mouldings according to samples, drawings and constructions of our customers in collabo-
ration with our technical department.
FORMS MATERIALS GENERAL TABLEPipes, round and square bars Polyurethane up to 1000 mm in length
sheets Polyurethane thickn. 1-10, 500 x 1000
thickn. 15-30, 500 x 1000
HECKER GSM PASTE M No. 1049A mineral oil-based lubricant with an additive of molybdenum disulfide which has been proven in practice over many
years. It can be well recommended for the application as installation and starting auxiliary for our GSM hydraulic and
pneumatic seals.d Einlaufhilfe für unsere GSM-Hydraulik- und Pneumatikdichtungen
HECKER GRAFIT PASTE K No. 1048Manhole, flange and screw lubricant. Avoids the burning together of flange seals and thus enables a quick and easy
loosening of worn seals. Prevents seizing of screws and nuts. This paste can also be recommended as lubricant for
rubber/fabric seals. Available in cans of 1 kg or in buckets of 15 kg.
CONTENTS AND INTRODUCTIONThe choice of seals for the hydraulic and pneumatic systems results from the consideration of a series of factors which
on a simplified basis can be devided into three main groups.
1. CONSTRUCTION DETAILSHere is to be considered, among others, the size and arrangement of the installation dimensions.
2. OPERATING CONDITIONSrespective seals are to be used. Here is to be considered: The comprehensive stress, the type of operating medium, the expec-
ted temperatures, running speed etc.
3. BUSINESS CONSIDERATIONSThese include the cost situation, questions concerning dates, that ist, the availability, also in the future, as well as the guarantee
of constant high quality for materials and performance.
Many of these factors mentioned above could contradict one another; also in many cases, the optimum solution can only be
found through a compromise. Therefore, the enormous choice of types and materials of the seals in this catalogue must be seen
from this perspective. The following tables contain profiles which have proven to be reliable in practice and thus represent our
standard program. We have included the ratings, installation notes and examples of application of every type of seal in order to
aid the design engineer in the right choice. For problem cases, the many years of experience which our technical consultation
service has, should be made use of.
4
t (°C) t (°C)
UG1
rubber (Gi) Gi-fabric (Gew)
polyurethane (PU)l l l l l l
< < <
160 315 400
-30 upto 110 -30 upto 120 -25 upto 80
< < <
0,5 0,5 0,3
< 16-20
up to +80
< 1
UG2
Gi PU
l l l l< <
160 400
-30 upto 110 -25 upto 80
< <
0,5 0,5
UR 1 + 2
Gi Gew
l l l l< <
160 315
-30 upto 110 -30 upto 120
< <
0,5 0,5
UNX7Gew l < 400 -30 upto 120 < 0,5
UNI1
Gi Gew PU
l l l< < <
160 315 400
-30 upto 110 -30 upto 120 -25 upto 80
< < <
0,5 0,5 0,3
< 16-20
up to +80
< 1
UNI2Gew l < 400 -30 upto 120 < 0,5
UNI3
Gi PU
l l < <
160 400
-30 upto 110 -25 upto 80
< <
0,5 0,5
< 16-20
up to +80
< 1
UNA1
Gi Gew PU
l l l< < <
160 315 400
-30 upto 110 -30 upto 120 -25 upto 80
< < <
0,5 0,5 0,3
< 16-20
up to +80
< 1
UNA2Gew l < 400 -30 upto 120 < 0,5
UNA3
Gi PU
l l < <
160 400
-30 upto 110 -25 upto 80
< <
0,5 0,5
< 16-20
up to +80
< 1
UNX1 UNX2
Gi Gi
l l< <
80 25
-30 upto 110 < <
0,5 0,5
MN1Gi l < 160 -30 upto 110 < 0,5
MA1-4
Gi Gew PU
l l l< < <
40 100 40
-30 upto 110 -30 upto 120 -25 upto 80
< < <
0,25 0,5 0,25
ST1-4
Gi Gew PU
l l l< < <
40 100 40
-30 upto 110 -30 upto 120 -25 upto 80
< < <
0,25 0,5 0,25
UGA1 UGA3
Gi-Gew.-combination
l l < 250 -30 upto 110 < 0,5
UGA2 UGA4Gi l l < 160 -30 upto 110 < 0,5
UGA5
Gi-Gew.-combination
l l < 250 -30 upto 110 < 0,5
CO
MPA
CT
SEA
LSseal profile
LIP S
EA
LS
p (bar)
recommended values for applicationhydraulic systems pneumatic systemstype
groupmaterial
rod
seal
cylin
der
seal
v (m/s) p (bar) v (m/s)
page
8
20
23
25
26
29
32
32
36
32
37
52
54
61
64
64
68
5
CONTENTS AND INTRODUCTION
t (°C) t (°C)
Gew. l l < 400-30 up to
+120< 0,5
Gew/Gi l < 250-30 up to
+120< 0,5
UK1-Sets
Gew. l l < 400-30 up to
+120< 0,5
UD1-Sets
Gew. l < 600-30 up to
+120< 0,5
Gew. l < 400-30 up to
+120< 1
Gew/Gi l < 250-30 up to
+120< 0,5
NOA1-Sets
Gew. l < 400-30 up to
+120< 1
DS4-W DS4-WB DS4-WS
PTFE + Gi
l < 500-30 up to
+110< 5 < 16
-20 bis
+120< 5
EUS1-H EUS2-H EUS3-H
PTFE + Gi
l < 500-30 up to
+110< 5 < 16
-20 bis
+120< 5
DK4-W DK4-WB DK4-WS
PTFE + Gi
l < 500-30 up to
+110< 5 < 16
-20 bis
+120< 5
EUK1-H EUK2-H EUK3-H
PTFE + Gi
l < 500-30 up to
+110< 5 < 16
-20 bis
+120< 5
PKS1 . PKK1
Gi
l
l < 16
-30 bis +80
< 1
EUK1-P . EUS1-P
PTFE + Gi l
l
< 25-30 bis
+120< 5
UNA-P . UNI-P
Gi PU
l
l
< 16-30 bis +80
< 1
pagehydraulic systems pneumatic systemsp (bar) v (m/s) p (bar) v (m/s)cy
linde
r se
al
recommended values for applicationtype group
seal profile material
rod
seal
NK1-Sets
EU
RA
FLO
N®
(PTF
E)
ELA
STO
MER
SEA
LIN
G S
ETS
SEA
LS F
OR
PN
EU
MA
TIC
SYSTE
MS
NOI1-Sets
SEA
LIN
G S
ETS
69
69
77
82
85
85
94
97
99
101
104
106
108
112
6
CONTENTS AND INTRODUCTION
ASDrubber (Gi) - 30 up to + 200 Valve- and gate valve stems,
switching axles, cocks
AKDGi - 30 up to + 200
butterfly valves for the food industry, chemical industriy, water treatment, hydraulic oil
supply etc.
rubber (Gi) - 20 up to + 110Polyurethane (PU) - 25 up to + 80
ABR2PU -25 up to + 80
ABR3Gi -20 up to +100
ABF2PU -25 up to + 80
ABP1PU -25 up to + 80
ABP2PU -25 up to + 80
ABP3PU -25 up to + 80
ABPU -25 up to + 80
Scrapers in special design e.g. for flat and dovetail guide belts,
polygon shafts etc.
KF1-S
PTFE-Bronze-Compound
-100 up to +200
ca. 2,5 for rods (ready for installations)
KF1-K
PTFE-Bronze-Compound
-100 up to +200
ca. 2,5 for pistons (ready for installation)
O-
RIN
GS
OR
dimensions according to DIN 3771, ISO 3601, ARP 568, BS
4518, SMS 1586
STA
R
RIN
GS
SR1
SR1 = Standard design for universal application.
RECTA
NG
ULA
R
PR
OFIL
E
RIN
G
RE1
Rectangular profile rings with different basic forms
(rectangular, square, with deviations etc.)
auf A
nfra
ge
GU
IDE
BELT
R
ING
S
AR
MA
TUR
E S
EA
LS
PU -25 up to + 80
ABR1
ABF1
application
ca. 1
Wiper seals for rods and plungers in hydraulic and
pneumatic systems and for die sets
Flat belt scrapers for flat belt guides, e.g. on machine tools,
wood treating and textile machines etc.
Prismatic belt scraper for prismatic belt guides e.g. on
machine tools, automatic machines etc.
Gi PU
type groupS
CR
APER
Spagespeed (m/s)seal profile material
operating temperature (°C)
113
114
115
115
119
120
121
122
7
CONTENTS AND INTRODUCTION
APPLICATIONGSM-U-Rings UG can be used in hydraulic and pneu-matic systems on the basis of its symmetrical profile ascylinder or rod-seal.In addition, they proved themselves at dosage and fil-ling plants and rotating and pivoting cylinders. Undermost circumstances they should not be used whereimpeded business-conditions like pressure-pushes,vibrations, etc., are to expect.
MATERIALS
materials Operating Hydraulics Pneumatics
medium p(bar) t(°C) v(m/s) p(bar) t(°C) v(m/s)
858 Petroleum, <=160 -20 <=0,5 <=16 -20 <=1
oil-water- up to up to
emulsion, +110 +80
900 compressed <=400 -25 <=0,3
air
071 <=315 -30 <=0,5
072 up to
+120
U-Rings UG1 are delivered in following standard-mate-
rials:
WS 858: a NBR-material with approximately 86 ShA
WS 900: a Polyurethane-material with approximately 94
ShA
WS 071, 072: NBR-fabric materials, that differ in the
fabric-structure. These materials are delivered stan-
dardly graphitated.
A particular tool is required for each of these three
material-types.
UG1-Rings can be manufactured on customer-wish in
each material. If the following tables show no suitable
tool for the relevant measurements please ask us.
However, it must be taken into account that different
rubber-kinds can differ in the production-sizes especial-
ly when using the same tool for different materials.
CLEARANCE BEHIND THE SEALToo much clearance behind the seal leads to a prema-
ture failure oft he seal. The admissible clearance
behind the seal is calculated as follows:
WS 858 Badm= 0,3 – 0,001p
(for p up to 160 bar )
WS 900
and WS 072 Badm = 0,4 – 0,008p
(for p up to 400 bar)
If „badm“ is exceeded, the additional installation of back-
up rings of suitable plastic materials (PTFE, POM) must
be provided behind the seal.
8
UG 1 U-RINGS ROD- AND CYLINDER SEALS
c) Support by means of O-rings
It offers herself as alternative for the use-cases where
no defined support by means of o-rings stands by the
disposal, for which is striven mode of action of the
same, however. Also here, the suitable O-Ring-dimen-
sions must be determi-
ned by us.
Our technical service
department informs
and advises you on:
• Further dimensions available
• Further materials please refer to the general
table „Materials“
• Installation dimensions
• Extreme conditions
Tell us about your sealing problems, we will develop a
solution to meet your requirements.
SUPPORTFor UG 1-Rings, the addi-
tional installation of sup-
porting elements is recom-
mended
a) The metallic support ring: Has to made by the
customer. The sketch informs about the dimensions of
the parts.
b) The profiled rubber support ring: In contrast to
the metallic support element this support of observance
of the mounting-measurement .L" a (see table of dimen-
sions) causes an additional radial pressure on the lips,
that has an effect positively particularly with fabric-
seals, since these parts show less elastic behavior as
a pure Elastomer-sealing. Get along only a restricted
number of tools for defined
support rings is on disposal.
In many cases the use of a
cutted profile-string is possi-
ble. It must be checked by
our technical department.
SEALING OF A PISTON ROD
9
UG 1 U-RINGS ROD- AND CYLINDER SEALS
SEALING OF A CYLINDER
INSERTION CHAMFER
S 4 5 7,5 10 12,5 15 20
C 2 2,5 4 5 6,5 7,5 10
10
UG 1 U-RINGS ROD- AND CYLINDER SEALS
11
UG 1 U-RINGS ROD- AND CYLINDER SEALS
12
UG 1 U-RINGS ROD- AND CYLINDER SEALS
13
UG 1 U-RINGS ROD- AND CYLINDER SEALS
14
UG 1 U-RINGS ROD- AND CYLINDER SEALS
15
UG 1 U-RINGS ROD- AND CYLINDER SEALS
16
UG 1 U-RINGS ROD- AND CYLINDER SEALS
17
UG 1 U-RINGS ROD- AND CYLINDER SEALS
18
UG 1 U-RINGS ROD- AND CYLINDER SEALS
19
UG 1 U-RINGS ROD- AND CYLINDER SEALS
20
UG 2 U-RINGS ROD- AND CYLINDER SEALS
SEALING OF A PISTON ROD
SEALING OF A CYLINDER
INSERTION CHAMFER
S 4 5 7,5 10 12,5 15 20
C 2 2,5 4 5 6,5 7,5 10
APPLICATION
• rod and cylinder seal• mobile hydraulic systems• injection machines and machine tools• standard cylindersGroove dimensions and ranges of diameter as per DINISO 5597/1 or DIN ISO 3320
materials Operating Hydraulics
medium p(bar) t(°C) v(m/s)
858 Mineral oil, <=160 -20 <=0,5
oil-water- up to
emulsion +110
900 <=400 -25 <=0,3
up to
+80
MATERIALSU-rings UG2 are delivered in following standard materi-als::WS 858: a NBR-material with approx. 86 ShoreAWS 900: a polyurethane-material with approx.
94 Shore A
SUPPORTSupporting elements are superfluous at the mounting ofUG2 rings.Montage-helps, insertion chamfer and split of the seal:For the allowable split "b(zul)" behind the seal and forthe insertion chamfer is worth the same implementa-tions like for profile UG1.
21
UG 2 U-RINGS ROD- AND CYLINDER SEALS
22
UG 2 U-RINGS ROD- AND CYLINDER SEALS
23
UR U-RINGS ROD- AND CYLINDER SEALS
SEALING OF A PISTON ROD
SEALING OF A CYLINDER
INSERTION CHAMFER
S 4 5 7,5 10 12,5 15 20
C 2 2,5 4 5 6,5 7,5 10
APPLICATIONU-Rings UR1 and UR2 correspond to our sealing typeUG1 in profile and operating usability. Originally develo-ped as a substitute for leather-sealings, they thereforeare rounded at the back.The substitution for leather sealing applies particularlyto hydraulic waiter and sub-piston-presses of older con-struction. rod and cylinder seal
RECOMMENDED VALUES FOR APPLICATIONmaterials Operating Hydraulics
medium p(bar) t(°C) v(m/s)
858 Mineral oil, <=160 -20 <=0,5
oil-water- up to
emulsion +110
071 <=315 -30 <=0,5
072 up to
+120
MATERIALSUR-Rings are delivered in following standard materials:WS 858: a NBR-material with approx. 86 Shore AWS 071/072: NBR cotton fabric materials which differ in
the structure of the fabric. Standard is a graphitated surface.
For further materials take a look in the chapter „materi-als“.
SUPPORTSupporting elements are superfluous at the mounting ofUG2 rings.Montage-helps, insertion chamfer and split of the seal:For the allowable split "b(zul)" behind the seal and forthe insertion chamfer is worth the same implementa-tions like for profile UG1.
MOUNTING AREA AND INSTALLATIONThe thrust-ring lying flat on the sealing-ground must befitted exactly on the radius of the corresponding roun-ding of the sealing-ring.It must be made out of metal or out of suitable plasticslike POM or PA.
The dimensions „R“, „r“ und „e“ are listed in the follo-wing tables or on inquiry.
SUPPORT AND TOOLS FOR INSTALLATIONUR-Rings have to be supported. For the 3 mentionedsupporting alternatives and for the types of the installa-tion tools look at chapter UG 1.
Metal-support-ring Metal-thrust-ring
balance drillings
24
UR U-RINGS ROD- AND CYLINDER SEALS
25
UNX 7 U-RING SEALING SET
AVAILABLE TOOLS
APPLICATION• cylinder seal for double acting pistons• mobile hydraulic systems• mining industry• stamping machines
RECOMMENDED VALUES FOR APPLICATION
materials Operating
medium p(bar) t(°C) v(m/s)
Sealing- Mineral oils, <400 -25 <0,5
ring oil-water- up to
071/072 emulsion +110
Back-up-
ring
POM/PA
090
MATERIALSStandard and on stock are U-rings in NBR-impreg-nated cottonfabric. Surface covered with graphite.The Back-up-rings are in hard-fabric or in POM/PA.For more materials see chapter “materials”.
CHARACTERISTICS OF THE SEALTwo-piece sealing-set, existing from a fabric-U-Ringwith powerful lips, pressed support-part and a sepa-rated one, defined back-up-ring. Installation dimen-sions are as per ISO 3320.
26
UNI 1, UNI 3 LIP SEAL, ROD SEAL
SEALING OF A PISTON ROD(GROOVE WITH LID)
SEALING OF A CYLINDER(RECESSED GROOVE)
INSERTION CHAMFER
S 4 5 7,5 10 12,5 15 20
C 2 2,5 4 5 6,5 7,5 10
APPLICATION• rod seal for hydraulic systems• standard cylinders• mobile hydraulic systems• injection machines and machine tools• spindle seal fittings• rotary and pivoting cylinders for low pressures andlow speeds
RECOMMENDED VALUES FOR APPLICATION
materials Operating Hydraulics Pneumatics
medium p(bar) t(°C) v(m/s) p(bar t(°C) v(m/s)
858 Mineral oil, <=160 -20 <=0,5 <=16 -20 <= 1
oil-water- up to up to
emulsion +110 + 80
compressed
900 air <=400 -25 up <=0,3
+80
071/072 <=315 -30 up <=0,5
to +120
MATERIALSStandard production and stockage is effected in a NBRquality with approx. 86 ShoreA (WS 858) and a PUquality with approx. 94 ShoreA (WS 900). WS 071, 072: NBR-fabric materials with different fabricstructures (standard is carbon surface)(WS 071, 072 recommended only for UNI1)Deliveries with other hardness and made of specialmaterials like FKM, EPDM, CR etc. are also possible,please refer to the general material table.
AVAILABILITYFor the dimensions available, please contact us.
MOUNTING AREA AND INSTALLATIONUNI-Rings are mounted without a seperate supportring. UNI1- and UNI3-Rings are more flexible and canbe mounted also in forehead closed mounting rooms. This kind of mounting is not possible in every mounting area, every material and every dimension of the ring.
CLEARANCE BEHIND THE SEALToo much clearance behind the seal leads to a premature failure of the seal. The admissable clearancebehind the seal is calculated as follows:WS 858:
bzul= 0,3-0,001p (pmax: 160 bar)
and for the other materials: 0,4-0,0008p (pmax: 400 bar)
TOOLS FOR INSTALLATIONLook for useful tools for installations and the rightinsertion chamfer that you don’t damage the thin
edges of the lips.
27
UNI 1, UNI 3 LIP SEAL, ROD SEAL
28
UNI 1, UNI 3 LIP SEAL, ROD SEAL
29
UNI 2 LIP SEAL, ROD SEAL
APPLICATION• bottom-ram press
• High-pressure-plunger-pumps
• Steam-hammers
For these applications it is possible to use
single rings or sets of rings. Sets of rings are
recommended particularly in the cases, where
open rings must be used. The number of the
elements combined to the sets follows the
respective operating-conditions on that occa-
sion and in the case of doubt our technical
advice should be asked.
RECOMMENDED VALUES FOR APPLICATION
sealing operating hydraulic systemsmaterial systems p(bar) t(°C) v(m/s)071 mineral <400 -30 <0,5072 oil, oil- up to
water- +120emulsionscompressedair
MATERIALSWS 071:
NBR-impre cotton fabric with a fine structure.
WS 072:
NBR-impregnated cotton fabric with a course
structure.
In addition, our cotton and Aramide fabrics
can be equipped also with other impregna-
tions on wish. Standard, UNI-2-rings are deli-
vered with a surface in graphite. Further
materials see in chapter “materials”.
MOUNTING AREA AND INSTALLATION2-Lip-rings are delivered normally as closed
rings. With demand (badly accessible sealing-
areas), however also the delivery of open
rings with diagonally cut seal-ends is possi-
ble.
Open UNI 2-seals, immediately whether cut
out from the next bigger measurement or
manufactured from so-called length-tools, can
be used only set by set. The cutting of these
rings delivered with excess takes place the
best like follows.
a) Decide the correct scope-length through
putting on the sealing-ring about the Plunger.
b) The push-places of the cutted ring some-
thing must be a bit larger at good installation at
the Plunger in order to cause a small pressure in
scope-direction after the mounting in the stuffing-
box-area.
c = 0,1 x H
c) The push-places of the individual set-elements
are to be moved from ring to ring by approxima-
tely 120°. It is
recommended to
begin at the
exactly matched
push-places with
the montage of
open sealing-
rings in the stuf-
fing-box-room.
d) Difficult and heaviest business-conditions,
like for example high
press and speeds,
possibly make the
mounting of two
UNI2-rings necessa-
ry, as is represented
in following picture.
TOOLS FOR INSTALLATIONIn order to protect the sensitive lips with the
montage, suitable montage-helps and insertion
chamfers are to be intended.
ADJUSTING OF THE SEALING PRESSUREBefore the first operating use, the stuffing-box-
room can be attracted only easily. Only after
some lifting, insufficient sealing-effect can per-
haps be improved by well-measured after-spans.
In any case the span of the room must be cho-
sen in a way that an axial fixation of the sealing
set in the stuffing-box-room is guaranteed.
30
SEALING OF A PISTON ROD
SEALING OF A PISTON ROD
INSERTION CHAMFERS 4 5 7,5 10 12,5 15 20
C 2 2,5 4 5 6,5 7,5 10
UNI 2 LIP SEAL, ROD SEAL
OPEN SEALING RINGS UNI2
31
UNI 2 LIP SEAL, ROD SEAL
32
UNA 1, UNA 3 LIP SEAL, CYLINDER SEAL
APPLICATION• cylinder seal for hydraulic systems
• standard cylinders
• mobile hydraulic systems
• injection machines and machine tools
• rotary and pivoting cylinders for low pressures and
low speeds.
RECOMMENDED VALUES FOR APPLICATION
Material operating Hydraulic system Pneumatic systemmedium p(bar) t(°C) v(m/s) p(bar) t(°C) v(m/s)
858 mineral oil < 160 -20 up < 0,5 < 16 -20 up <1oil-water- to 110 to 80emulsions,
900 compres- < 400 -25 up < 0,3sed air to 80
071 < 315 -30 up < 0,5072 to 120
other materials see chapter “materials”
MATERIALSStandard production and stockage is effected in a
NBR-quality with approx. 86 ShoreA (858). Deliveries
with other hardness and made of special materials like
FKM, EPDM, CR etc. are also possible, please refer to
the general table.
WS 858: a NBR-material with approx. 86 Shore A
WS 900: a Polyurethane material with approx. 94 ShA
WS 071,072:
NBR-fabric-materials which differ in the structure of the
fabric. Standard is a surface in graphite. (WS 071, 072
is recommended only for UNA1)
TOOLS FOR INSTALLATIONIn order to protect the sensitive lips with the montage,
suitable montage-helps and insertion chamfers are to
be intended.For the dimensions available, please
contact us.
CLEARANCE BEHIND THE SEALToo much clearance behind the seal leads to a prema-
ture failure of the seal. The admissable clearance
behind the seal is calculated as follows:WS 858: bzul = 0,3-0,001p (for p up to 160 bar)
WS 900, 071, 072: bzul = 0,4-0,008p (for p up to 400 bar)
MOUNTING AREA AND INSTALLATIONUNA-rings are mounted without an extra support ring.
UNA1-Seals in WS 858 and WS 900 are more flexible and
it is possible to snap them in closed mounting areas. For D
> 25, we recommend
installation into opren
groove with lid. UNA
rings in WS 071 and 072
can only be mounted in a
open mounting area.
SEALING OF A CYLINDERGROOVE WITH LID
SEALING OF A CYLINDERRECESSED GROOVE
INSERTION CHAMFER
S 4 5 7,5 10 12,5 15 20
C 2 2,5 4 5 6,5 7,5 10
33
UNA 1, UNA 3 LIP SEAL, CYLINDER SEAL
34
UNA 1, UNA 3 LIP SEAL, CYLINDER SEAL
35
UNA 1, UNA 3 LIP SEAL, CYLINDER SEAL
36
UNA 2 LIP SEAL, CYLINDER SEAL
APPLICATIONUNA 2-Lip-rings in fabric materials are used
as cylinder seals in heavy hydraulic presses.
RECOMMENDED VALUES FOR APPLICATION
sealing operating medium hydraulic system
material p (bar) t (°C) v (m/s)
071 mineral oil, oil- < 400 -30 up < 0,5
072 water-emulsions, to 120
compressed air
(other materials see chapter “materials”)
MATERIALSWS 071:
NBR-impregnated cotton-fabric material with
a thin structure.
WS 072:
NBR-impregnated cotton-fabric mateial with a
more rough structure.
Other cotton and aramide fabric materials can
be made also with other impregnations.
Standard impregnation is a surface in
graphite.
MOUNTING AREA AND INSTALLATIONUNA2-cylinder seals should be used only as
closed rings in order to avoid difficulties with
the montage of the seal. They can be used as
single seals or in sealing-sets
TOOLS FOR INSTALLATIONIn order to protecdt the sensitive lips with the
montage, suitable montage-helps and inser-
tion chamfers are to be intended.
Installation length L = H
CYLINDER SEAL
CYLINDER SEAL
INSERTION CHAMFER
S 4 5 7,5 10 12,5 15 20
C 2 2,5 4 5 6,5 7,5 10
37
UNX 1, UNX 2 U-RING SEAL, ROD SEAL
APPLICATIONThe difference between UNX1 and UNX2 is a
wiper under the bottom of the seal. Because
of the pretty good friction behavior the use is
recommended where the reserve power is
limited e.g. in hydraulic-lifting-systems. (car lif-
ters, load-elevators, hydraulic ramps)
RECOMMENDED VALUES FOR APPLICATIONsealing operating medium hydraulic system
material p (bar) t (°C) v (m/s)
858 mineral oil, oil- UNX1< 80 -20 up < 0,5
water-emulsion, UNX2< 25 to 110
UNX1-rings can be produced in a harder
material and therefore can be used for pres-
sures up to 160 bar.
MATERIALSUNX-Rings are produced in a NBR-material
(WS 858) with a hardness of 85 ShoreA.
Further materials upon request.
MOUNTING AREA AND INSTALLATIONFor the shape and the dimensions of the
mounting area look in the table. Split leakage
and with it the destroying ot the UNX2 seal is,
because of the wiper under the bottom of the
seal only to fear if the recommended values
for the application are crossed.
CLEARANCE BEHIND THE SEAL UNX1Too much clearance behind the seal leads to
a premature outage of the sealing properties.
The admissible clearance behind the seal is
calculated as follows:
WS 858: bzul=0,3-0,001p (for p up to 160 bar)
TOOLS FOR MOUNTING- no sharp edges, please
do not use sharp installa-
tion tools
- look for insertion chamfers
ROD SEAL UNX 1
ROD SEAL UNX 2
INSERTION CHAMFER
S 4 5 7,5 10 12,5 15 20
C 2 2,5 4 5 6,5 7,5 10
insertion chamfer
insertion chamfer
rounded edges
38
MN 1 LIP SEAL, CYLINDER SEAL
APPLICATION• hydraulic brake systems
• hand pumps
• car lifters
MN-rings are hanged cylinder seals, develo-
ped especially for pistons under pressure from
only one side. In the profile of the lips and the
mode of action they are identically with our
outer lip seal UNA1 the sealing is recommen-
ded in those cases where a complete covera-
ge of the metallic piston haed side is desired.
RECOMMENDED VALUES FOR APPLICATION SEALING OPERATING MEDIUM HYDRAULIC SYSTEM
MATERIAL p (bar) t(°C) v(m/s)
858 mineral oil, < 160 -20 < 0,5
oil-water-emulsions up to
water + 110
MATERIALSMN-sealing rings are produced preferably in
our NBR-material WS 858 (86 ShoreA).
Further materials on inquiry.
MOUNTING AREA AND INSTALLATIONMN-sealing rings are mounted hanged in
accordance to the shape of the piston body.
CLEARANCE BEHIND THE SEALToo much clearance behind the seal leads to
a premature failure of the seal. The admissa-
ble clearance behind the seal is calculated as
follows (WS 858):
bzul = 0,3 - 0,001p (for p up to 160 bar)
TOOLS FOR INSTALLATIONLok for useful tools for installation and the
right insertion chamfer that you don’t damage
the thin edges of the lips.
insertion chamfer
rounded edges
CYLINDER SEAL
INSERTION CHAMFER
S 4 5 7,5 10 12,5 15 20
C 2 2,5 4 5 6,5 7,5 10
39
MA U-SHAPED SEAL, CYLINDER SEAL
APPLICATIONU-shaped seals seals MA are suitable as piston-seals
and walking movements into hydraulic and pneumatic
systems. For use-cases, where pressure-loose work-
phases frequently occur, the use of our MA3 and MA4
with feather-backed tension of the lip.is recommended.
RECOMMENDED VALUES FOR APPLICATION
SEALING OPERATING HYDRAULIC SYSTEM PNEUMATIC SYSTEMMATERIALS MEDIUM p(bar) t(°C) v(m/s) p(bar) t(°C) v(m/s)
858 mineral oil < 40 -20 < 0,25 < 16 -20 < 1water up to up to
water-emulsions +110 + 80compressed
900 air < 40 25 < 0,25up to+ 80
071 < 100 -30 < 0,25072 up to
+120
SEAL PROPERTIESAll U-shaped-seals MA1-4 are equipped with relatively
long sealing-lips and flat shaped flange-looking sea-
ling-grunds, that show central-drillings with most mea-
surements. Partially, considerable differences are in
the relationship of pre-tension, lips and ground-
strength, centralisation e.g.given and declares itself
from the difference of the in each case first need.
The lips of our types MA3 and MA4 find out an additio-
nal pressure through interior-lying pressure-feathers at
the cylinder-wall.
The sealing-types MA2 and MA4 are approximately
looking round at the lip-back, MA1 and MA3 at this
place have a twisty transition to the ground.
MATERIALSThe MA-seals are delivered normally in the following
standard materials:
WS 858: a NBR- material with approx. 86 ShA
WS 900: a polyurethane-material with approx. 94 ShA
WS 071; 072: NBR-cotton-fabric materials which differ
in the structure of the fabric. Standard is a surface with
graphite (not possible for MA3 and MA4)
Further materials on inquiry.
The feathers for MA3 and MA4 are in standard-imple-
mentation out of unalloyed feather-steel-wire. These
can also be delivered in material 1.4310.
INSTALLATION AREA AND MOUNTINGMA-seals (with central-drilling) are installed into open
mounting-areas in principle, i.e. the necessary sealing-
compression at the flange-ground must take place by
means of a stretchable stationary-ring. A border for
pressing through attack should be intended. For the
seals MA2 and MA4, the metallic surface of the piston
must show the same radius as at the outer diameter
how it is to be found for the corresponding seal under
the table-measurement "R." This recommendation is
applicable to all R bigger than 3 mm.
CLEARANCE BEHIND THE SEALThe maximum clearance (b) behind the seal is:
WS 858 bzul = 0,2 mm
WS 900, 071 and 072: bzul = 0,3 mm
TOOLS FOR INSTALLATIONLook for useful installation tools and the right insertion
chamfer (C=0,3H) that you don’t damage the thin edges of
the lips.
CYLINDER SEAL MA 1
CYLINDER SEAL MA 4
INSERTION CHAMFER
Round the
edge
metallic surface
Round the
edge
40
MA U-SHAPED SEAL, CYLINDER SEAL
41
MA U-SHAPED SEAL, CYLINDER SEAL
42
MA U-SHAPED SEAL, CYLINDER SEAL
43
MA U-SHAPED SEAL, CYLINDER SEAL
Standardly the material is delivered with a
graphite covered surface (not possible for
ST3 and ST4). For further materials see
chapter „materials“. The springs for ST3 and
ST4 are standardly out of non alloyed feather-
steel wires. These can be delivered in
material 1.4310.
CLEARANCE BEHIND THE SEALThe maximum clearance (b) behind the seal
is: 0,2mm for WS 858 and 0,3mm for WS
900, 071 and 072.
MOUNTING AREA AND INSTALLATIONST seals are installed into open mounting
areas. That means the necessary sealing
compression at the flange-ground must take
place by means of a stretchable stuffing-box-
glass. A border for maximum pressure
through attack or supplement-disks should be
intended. For the cap seals ST2 and ST4, the
metallic installation surface must show the
same radius at the piston at the inner diame-
ter how it is to be found for the corresponding
seal under the table-measurement R. This
recommendation is applicable to all R > 3mm.
TOOLS FOR INSTALLATIONLook for useful tools for installation and the
right insertion chamfer that you don’t damage
the thin edges of the lips.
44
ST CAP SEAL, ROD SEAL
APPLICATIONCap-seals ST are suitable as rod-seals for
walking movements into hydraulic and pneu-
matic systems. They proved themselves as
radial-sealing-elements, where slow trick, and
swing-movements from interior pressure-bur-
den take place, e.g. in mixer shafts - put - and
rule-elements in the turbine-construction and
at spindles für armatures. For use-cases,
where pressure-loose work-phases frequently
occur, recommends the use of our ST3 and
ST4 with feather-backed pre-tension of the
lips.
SEALING SPECIFICATIONSAll cap-seals ST1-4 have relatively long sea-
ling lips and even flange-grounds.
From dimension to dimension, partially con-
siderable differences are given in the rela-
tionship of pre-tension, lips and ground-
strength, that let itself explain mainly from the
difference of the in each case first need.
The lips of the sealings ST3 and ST4 beco-
mes an additonal pressing by a circular pull-
spring. The cap seal types ST2 and ST4 are
round on the back of the lip whereas the
types ST1 and ST3 have an angled passage
to the ground.
RECOMMENDED VALUES FOR APPLICATION
SEALING OPERATING HYDRAULIC SYSTEM PNEUMATIC SYSTEMMATERIALS MEDIUM p(bar) t(°C) v(m/s) p(bar) t(°C) v(m/s)
858 mineral oil < 40 -20 < 0,25 < 16 -20 < 1water up to up to
water-emulsions +110 + 80compressed
900 air < 40 25 < 0,25up to+ 80
071 < 100 -30 < 0,25072 up to
+120
MATERIALSThe cap-seals ST are delivered normally in
the following standard-materials:
WS 858: a NBR-material with 86 ShA
WS 900: a polyurethane material with 94 ShA
WS 071, 072:
NBR-cotton-fabric-materials which differ only
in the structure of the fabric.
rounded edges
metallic surface
rounded edges
insertion chamfer
45
ST CAP SEAL, ROD SEAL
ROD SEAL ST1
ROD SEAL ST4
INSERTION CHAMFERc = 0,3 x H
sealing rills
grease box
46
ST CAP SEAL, ROD SEAL
47
UGA COMPACT PACKING SEAL
APPLICATIONHydraulic cylinder, lightweight to
medium/heavy operating conditions, small
installation areas, rod seal and cylinder seal
for pressure on one side, hinges, rotary trans-
mission leadthroughs at low speed.
RECOMMENDED VALUES FOR APPLICATION
SEALING OPERATING HYDRAULIC SYSTEM MATERIAL MEDIUM p(bar) t(°C) v(m/s)
951 mineral oil < 250 -20 < 0,5 969 oil-water- up to
-emulsions +110 water
858 < 160 25 < 0,5up to+110
MATERIALSUGA1, 3 and 5 rings are delivered in the follo-
wing standard material combinations: WS 951
and WS 969. They consist of NBR impregna-
ted cotton-fabric material with a different
structure just as an attached vulcanized rub-
ber-part out of NBR.
Delivery is also possible in material
combinations with FPM and aramide.
Standard are rings with graphite on the surfa-
ce. UGA2 and 4 Rings are delivered - if orde-
red not differently - in our NBR-material WS
858 with 86 ShA. Further materials see chap-
ter “materials”.
CHARACTERISTICSUGA–Rings are compact packings. The pre-
tension comes through the distortion of a
massive elastomer-block. This block causes a
high sealing pressure for a long time also in
low pressure areas or in areas with no pres-
sure.
In contrast to the profiles UGA2 and UGA4,
which consist only of rubber, the types UGA1,
3 and 5 have an additional onvulcanized
fabric part. This increases the distortion-stabi-
lity, reduces the inclination to the extrusion in
the split and improves - particularly in the higher
pressure-areas - the rubbing behaviour of the
seal through lubricant-storage in the fabric-
surface-structure.
CLEARANCE BEHIND THE SEALToo much clearance
behind the seal leads to a
premature outage of the
sealing properties. The admissible clearance
behind the seal b is calculated as follows:
WS951, 969: b=0,4-0,008p for p up to 250bar
WS858: b=0,3-0,001p for p up to 160bar
ROD SEAL
CYLINDER SEAL
INSERTION CHAMFERS 4 5 7,5 10 12,5 15 20
C 2 2,5 4 5 6,5 7,5 10
48
UGA COMPACT PACKING SEAL
49
UGA 5 COMPACT PACKING SEAL
MATERIALSUGA 5 Rings are delivered in the standard-
material-combinations WS 951 and WS 969.
They consist of a NBR impregnated cottonfa-
bric material with different structure and a
onvulcanized rubber-block of NBR. Delivery in
a FKM-Aramide-fabric combination is possi-
ble. Standardly the rings have graphite on the
surface.
RECOMMENDED VALUES FOR APPLICATION
OPERATINGMEDIUM p(bar) t(°C) v(m/s)
mineral oil < 250 -20 < 0,5 oil-water- up to
-emulsions +110
bzul = 0,4-0,0008 p ( for p up to 250 bar)
CYLINDER SEAL
INSERTION CHAMFER
S 4 5 7,5 10 12,5 15 20
C 2 2,5 4 5 6,5 7,5 10
NOMINAL SEAL DIMENSIONS
50
NK V-PACKING ROD & CYLINDER SEAL
STANDARD V-PACKINGS• multipart seal with 1-7 sealing rings, 1 male adapter
ring and 1 female adapter ring
• to be retensioned by means of spreading lips, resul-
ting in a longer lifetime
• closed design up to a max. diameter of 800 mm
• possibility for an open design for min. 3 sealing rings
• open design available up to a max. diameter of 1500
mm
• design with studded male adapter ring for installation
areas without retensioning possibility.
RECOMMENDED VALUES FOR APPLICATIONFor further materials please refer to the general tableSEALING OPERATING HYDRAULIC SYSTEMSMATERIAL MEDIUM p(bar) t(°C) v(m/s)
071 mineral oil < 400 -25 < 0,5 072 oil-water-emulsions up to
water +120
APPLICATION• plungers and piston rods for presses
• mobile hydraulic systems
• working cylinders for medium up to heavy operating
conditions
• frequent change of pressure
• for new design series NK-N, NK-K, NK-H
CLEARANCE BEHIND THE SEALToo much clearance behind the seal leads to a prema-
ture failure of the seal. The admissible clearance
behind the seal is calculated as follows:
b = clearance behind the seal
p = operating pressure (bar)
badm= 0,4 - 0,0007 p
RIGHT CUTTING FOR INSTALLATION OFOPEN SEALING SETSc = 0,1H
INSTALLATION OF OPEN SEALING SETS• cutting to length by HECKER or contact us for further
information
• first position the gaps
• prior to the first stroke, slightly tighten the collar
• retighten until an optimum sealing efficiency is achieved
• Note: In the case of media causing swelling of the seal,
please retighten after the initation phase
gaps offset by approx. 120°
SUPPORTIf there are no fitting tools for adapter rings, the
customer will be able to fabricate them from a
piece of metal. The following illustration serves
for a correct dimensioning, or you may contact
us for more detailed information.
metal-support-ring sealing ring NK1 metal thrust ring
edges rounded
1 continous groove
4-6 cross grooves for pressure compensation
dimensions “R” as per size table
S = (D-d)/2
TOOLS FOR INSTALLATIONTo protect the thin sealing lips please use the
right tools and look for insertion chamfers.
round the edges insertion chamfers
round the edges
51
NK V-PACKING ROD & CYLINDER SEAL
L = installation length
SH = height of set
x = number of NK1-Rings
L = SH = x * b + h + s
The height of sealing set or installation length
which can be calculated according to the above
formula is a recommended value. Depending on
the respective width of profile, number of rings,
material shrinkage etc., deviations up to +2 and -
1 mm are possible.
PISTON ROD SEAL
INSERTION CHAMFER
S 4 5 7,5 10 12,5 15 20C 2 2,5 4 5 6,5 7,5 10
52
NK V-PACKING ROD & CYLINDER SEAL
53
NK V-PACKING ROD & CYLINDER SEAL
54
NK V-PACKING ROD & CYLINDER SEAL
NK 1
L = SH = x. b+h+s L = installation length
SH = height of sealing set
X = numer of x-rings (at least 3 NK)
d 700-1500 / S 30 / H 25,6 / b 13,5 -> Ordner no. 2-5763
Adapter rings must be fabricated by the customer as per the above mentioned
dimensions. Diameters from 700 up to 1500mm are available.
VR 1
d 700-1500 / S 20 / H 17 / b 8 -> Ordner no. 2-6001
male AR: h 13 -> Order no. 2-6001
female AR: s 9 -> order no. 2-6001
studded male AR: h1 23 -> order no. 2-9209
Heights of sealing set and installation heights:
number of the rings with stand.male adapter ring with studded male adapter ring
v-rings Height of set=heigt of inst. heigt of set install. length
S = L SH1 L1
3 46 56 54
4 54 64 62
5 62 72 70
6 70 80 78
7 78 88 86
55
NK V-PACKING ROD & CYLINDER SEAL
4-6 pressure compensating grooves
1 continous groove
Metal adapter
ring
Sealing ring
NK 1
Metal adapter
ring
Gaps offset by 120°
Standard adapter ring
Gaps offset by 120°
Studded adapter ring
Distance plates for
height adjustment
Adapter ring
Sealing ring VR1
L1
= insta
llation length
SH
1=
Heig
ht
of
set
56
NK-1 V-PACKING ROD & CYLINDER SEAL
TABLE (WITH STUDDED SUPPORT RING)
The studded male adapter rings listed in this table can
also be applied for V-packings on the following table.
The elastic studs of the adapter ring enable an axial pre-
tensioning of the sealing set within a solid installation
area.
• = male adapter ring available in open design only
•• = female adapter ring available in open design only
L = installation length
SH = height of set
PISTON ROD SEAL
INSERTION CHAMFER
CYLINDER SEAL
S 10 12,5 20
C 5 6,5 10
57
UK V-PACKING, ROD & CYLINDER SEAL
GSM-UK U-ring-sets are sturdy multisectional sealing-
elements. They consist of adapter rings and several UK-
Rings. The UK-Rings are conical at the back. If you put
several UK-Ringe to a set together, they touch itself only
at the powerful back of the profile (back-radius). The sea-
ling lips even lie exposed on that occasion and are spre-
ad by oncoming pressure.Therefore an axial after-tension
is not possible.
If no tools for supports and thrust-ring are presented in
our measurement-table, these must be manufactured out
of metal of the customer.
APPLICATIONUK-sets are suitable for the insulation of plunger pumps,
piston-rods and pistons with high demand. The lying
exposed lips guarantee a comparatively low friction
opposite after-ductile set-types here, for example what
with free-fall-plungers at sub-piston-presses of advantage
is. Also the use proved itself at high-speed plunger
pumps, that work with very high pressing and pure water
without lubricant-addition as pressure-medium. If good
insulation is necessary in the low-pressure-area, our
after-ductile NK-sets should be preferred.
RECOMMENDED VALUES FOR APPLICATION
SEALING OPERATING HYDRAULIC SYSTEMSMATERIAL MEDIUM p(bar) t(°C) v(m/s)
071 mineral oil < 400 -30 < 0,5 072 oil-water-emulsions up to
water +120
MATERIALSStandard design and stockage is effected in materials
071 and 072. For some of the dimensions exist tools for
polyurethan or pure rubber materials.In this cases a
NBR-material (WS 858 / 86 ShoreA) or a polyurethane-
material (WS 900 / 92 ShoreA) are recommended. For
further materials, please refer to the general table.
Thrust- and female adapter rings are made of hard
compounds (WS 090).
CLEARANCE BEHIND THE SEALIn case of the use of fabric female adapters the recom-
mended clearance behind the seal (“b”) is calculated as
follows: b = clearance behind the seal
p = operating pressure (bar)
bzul = 0,4 - 0,0007p (for p up to 400 bar)
SUPPORTFor adapter rings in metal versions
the following graphic is useful to fix
the dimensions:
S=(D-d) / 2
INSTALLATION TOOLSTo save the thin sealing edges use
correct tools and insertion chamfers.rounded edges insertion chamfers
round the edges
metal adapter ring UK1-Ring metal adapter ring
1 = continuous groove
4-6 = cross grooves for pressure compensation
dimension “R” corresponding to dimension table
Ro
dØ
cylin
de
rØ
PISTON ROD SEAL
INSERTION CHAMFER
S 4 5 7,5 10 12,5 15 20C 2 2,5 4 5 6,5 7,5 10
58
UK V-PACKING, ROD & CYLINDER SEAL
CYLINDER SEAL
L = installation length
SH = height of sealing set
x = number of UK-1 rings
L = SH = x * b + h + s
59
UK V-PACKING, ROD & CYLINDER SEAL
60
UD1 U-RING SET, ROD SEAL
GSM-U-Ring sealing sets UD1 are multisectional sealing-ele-
ments in robust implementation. They consist from ever one
support-ring and a thrust-ring and several UD1-U-rings, whose
special profile-formation a radial spreading of the lips causes
with oncoming pressure and axial glasses-tightening. This
after-tightening allows a cost-lowering extension of the sea-
lings stand-time beside the attitude of a optimal sealing-effect.
UD1-sets, for which are tools according to following table exi-
sting, can be delivered as open or closed rings. Inter-sizes, for
which no matching tools are available, however are available
only in open implementation. Theyare cut out from the next-
bigger, unending dimensions.
APPLICATIONUD1-U-ring-sealing sets are suitable because of their sturdi-
ness to the insulation at plungers and piston-rods in the
heavy-hydraulics, how for example at cutting-presses, rope-
presses etc.. Their use as ros seals restricts itself to special
cases. However, their application is recommended everywhere
there, where are through exceptional operating-conditions, like
lateral pushes or strong disruptions , high requests for the
sealing-elements. The friction-strengths are with UD1-sealing
sets somewhat more highly in general. They are less been
suitable for this reason in cases where only restricted friction-
strengths are (for example plungers, that should fall back into
their exit-situation through their net weight) allowable.
RECOMMENDED VALUES FOR APPLICATIONSEALING OPERATING HYDRAULIC SYSTEMSMATERIAL MEDIUM p(bar) t(°C) v(m/s)
mineral oil < 600 -30 < 0,5 072 oil-water-emulsions up to
water +120
MATERIALSUD1-sets are delivered only in wear resistant fabric materials.
Standard design is WS 072 = NBR-fabric-cotton material with
a rough surface structure.
For special operating conditions, e.g. higher temperatures, dif-
ficult inflamable operating mediums their exist special materi-
als (refer to the gernal table for materials).
CLEARANCE BEHIND THE SEALThe admissible clearance behind the seal is calculated as fol-
lows:
b = clearance behind the seal
p = operating pressure
bzul = 0,6 - 0,0005p (for p up to 630 bar)
The right cutting at the mounting of open
set-elements and mounting-hints:
The cutting of open delivered rings
should be used like follows: The exact
seal-length is determined by putting on
about the plunger. The stick parts of this
of ready cutted rings must be a bit lon-
ger at good installation around the
Plunger in order to cause a small jolt of
the ring in scope-direction after the
mounting in the stuffing-box-room.
c = 0,1 * H
The stick-places of the individual set-ele-
ments are to be moved from ring to ring
by approximately 120°.
It It is recommended to begin the moun-
ting with exactly matched stick-places
when bringing in open sealing rings in
the stuffing-box-room.
120°
TOOLS FOR INSTALLATIONTo save the sensitive sealing lips at the
mounting procedure use proper installa-
tion tools and insertion chamfers.
rounded edges installation case
insertion chamfers
/ rounded edges
61
UD1 U-RING SET, ROD SEAL
ADJUSTMENT OF THE SEALING PRESSUREBefore the first installation, the stuffing-box-glass can be attracted only easily. Only after some
lifts of the plunger, insufficient sealing
effect can perhaps be improved by well-measured after-spans.
With operating-media with elevated swelling-effect on the sealing-material, the most favorable
sealing-effect is reached through relaxation and later after-stretching of the stuffing-box-glass
after a finish-phase to put in.
DIMENSION TABLE UD1
adapter ring UD1 ring adapter ring
S 20 25
C 10 12,5
INSERTION CHAMFER
62
NOI 1 LIP-SEAL-SET, ROD SEAL
APPLICATIONNormally, NOI1-Ringe are combined with sup-
port-rings and pressure-rings to sealing sets,
whose construction follows the constructive and
operational realities. If no tools for support-rings
and pressure-rings are presented in our dimen-
sion-table, they finally must be manufactured by
the customer of metal.
NOI1-sets are been suitable as sealing-element
for rods and plungers particularly there where
the maximum pressure becomes effective with
long lifting and relatively high lifting-speed only
over one relatively short work-area. The long lips
favor a comparatively good friction-behaviour on
this occasion and are able to equalize certain
leadership-imprecisions through their flexibility.
The use of NOI1-sets spreads from the spindle-
insulation in the armature-industry over the use
as press-insulation in the hydraulics until to the
approved sealing-elements at smithy-presses
and steam-hammers.
RECOMMENDED VALUES FOR APPLICATION
SEALING OPERATING HYDRAULIC SYSTEMSMATERIAL MEDIUM p(bar) t(°C) v(m/s)
071 mineral oil < 400 -30 < 1,0 072 oil-water-emulsions up to
water +120 -20
858 < 250 up to < 0,5+110
MATERIALSNOI1-rings are delivered to 071 and WS 072 as
standard-implementation in NBR-cotton-fabric-
materials. For the use of steam, we deliver these
rings in WS 054 (CR-impregnated aramide
fabric). When dimensions for the rubber-tools
exist, we manufacture support rings and pressu-
re-rings in our NBR-standard-material WS 858
with approximately 86 Shore A. For some dimen-
sions we can produce rings in our especially
wear-solid hard-fabric-quality WS 090.
If special operating-conditions make it necessary,
like for example higher temperatures, heavy-
inflammable liquids) NOI-sets can be delivered
also in for this suitable materials. (for further
materials please refer to the general table for
materials)
CLEARANCE BEHIND THE SEALWith application of fabric-pressure-rings, the
allowable clearance behind the seal „bzul“ is
calculated as follows:
b = clearance behind the seal
p = operating pressure (bar)
bzul = 0,5 – 0,0005p (for p up to 400 bar)
SUPPORTIf the adapter rings must be manufactured of
metal, following drawing of the measurement-
establishing serves:metal adapter ring sealing ring NOI1 metal adapter ring
round the edges
a = H - h + 0,3S
R = 0,44S
C = 0,25S
e = 0,6S S = (D-d)/2
In difference from the usual set-construction a
series of proved set-combinations is used in
the practice. Instead of a metallic adapter ring
an exactly dimensioned O-Ring can cause
additional pressure of the neighboring NOI1-
lips one and can improve the sealing-function
with it in the low-pressure-area.adapter ring (o-ring)
The combination of NOI1-sealing rings with
special soft-stuffing-box-rings causes an
essential reduction of the friction through their
high lubricant-share.
63
NOI 1 LIP-SEAL-SET, ROD SEAL
soft stuffing box ring
An adapter ring installed in the set can serve the
leakage-drainage, bring additional lubricants
against the seal or with armatures and agitator
gearings of suitable locking medias.
CORRECT CUTTING FOR INSTALLATIONOF OPEN RINGS AND INSTALLATIONINSTRUCTIONSOpen NOI1-rings can cut out been delivered
from so-called length-tools and cutted out from
bigger tools.. The cutting should be done like fol-
lows: the exact seal-length is determined by put-
ting on around the plunger. The push-places of
this ready cutted rings must be a bit longer at
good installation at the plunger in order to cause
an easy accumulation in scope-direction after the
mounting in the stuffing-box-room. C = 01 * H
The push-places of the individual set-ele-
ments are to be moved from ring to ring by
approximately 120°.
When mounting the sealing-rings in the stuf-
fing-box-room, it is advisable to begin with the
exactly matched push-places.
TOOLS FOR INSTALLATIONTo save the thin lips at the installation use
correct mounting tools and insertion cham-
fers.
rounded edges insertion chamfers
rounded edges rounded edges
ADJUSTMENT OF THE SEALING PRESSUREBefore the first use, the stuffing-box-glass can
be attracted only easily. Only after some lifts
of the plunger, insufficient sealing-effect can
perhaps be improved by well-measured after-
spans.
With operating-media with elevated swelling-
e-effect on the sealing-material, the most
favorable sealing-effect is reached through
relaxation and later after-stretching of the
stuffing-box-glass.
adapter ring “between”
push places moved by 120°
64
NOI 1 LIP-SEAL-SET, ROD SEAL
65
NOI 1 LIP-SEAL-SET, ROD SEAL
66
NOI 1 LIP-SEAL-SET, ROD SEAL
67
NOI 1 LIP-SEAL-SET, ROD SEAL
OPEN SEALING RINGS NOI1LENGTH - TOOLdiameter d from 600 up to 1500 mm
68
NOA 1 LIP SEAL SET, ROD SEAL
APPLICATIONNormally, NOA1 rings are combined with sup-
port-rings and pressure-rings t sealing sets,
whose construction follows the constructive
and operational realities.
NOA1-sets are been suitable as sealing ele-
ments for rods particularly there where the
maximum pressure becomes effective with
long lifting and relatively high lifting-speed
only over a relatively short working area. The
long lips favor a comparatively good friction-
behaviour on this occasion and are able to
equalize certain leadership-imprescisions
through their flexibility.
RECOMMENDED VALUES FOR APPLICATION
SEALING OPERATING Hydraulic systemMATERIAL MEDIUM p(bar) t(°C) v(m/s)
071 Mineral oil ≤ 400 -30 ≤ 1,0 072 oil-water-emulsions up to
water +120
MATERIALSNOA1-rings are delivered in WS 071 and WS
072 as standard-implementation in NBR-cot-
ton-fabric-materials. Male- and female adapter
rings are - if the special tools are in stock -
produced in our especially wear-solid hard-
fabric-material WS 090. If special operating-
conditions make it necessary, like for example
higher temperatures, heavy-inflammable
liquids) NOA-sets can be delivered also in for
this case suitable materials. (refer to our
general table for materials).
INSTALLATION TOOLSTo save the thin lips do not use sharp installa-
tion tools and look for insertion chamfers.
If the adapter rings must be manufactured of
metal, following drawing of the measurement
establishing servers:
metal adapter ring sealing ring NOI1 metal adapter ring
a = H – h + 0,3 S
R = 0,44 S
c = 0,25 S
e = 0,6 S
L = installation length
SH = height of the set
x = number of NOI1-rings
L = SH = a+h+ (x-1) s+b
The result is only a clue.
According to profile-width, ring-numbers, material-shrinka-
ge etc. can deviations until +2 and .1 mm
appear.
SUPPORT
INSERTION CHAMFER
CYLINDER SEAL
S 4 5 7,5 10 12,5 15 20C 2 2,5 4 5 6,5 7,5 10
round the edges
69
NOA 1 LIP-SEAL-SET, ROD SEAL
70
DS4-W -WB -WS DUOSET SEALING SET, ROD SEAL
SEAL PROPERTIES• PTFE slide ring with elastic clamping ele-
ment
• high sealing effect at low friction
• no stick slip
• very long service lives
• less space requirement and easy installation
areas
• for pressure admission on one side
• high specific surface pressure
• a good sealing pressure is achieved with
the application of the operating pressure and
by pretensioning
• single or tandem arrangement
APPLICATION• rod seal in hydraulic systems
• shaft seal
• hinges and rotary transmisstion leadthrough
at low speed.
MATERIALEURAFLON® (PTFE) compound with elastic
elastomer clamping element. For further
materials, please refer to the general table.
INSTALLATIONTo be latched into the closed groove by reni-
form deformation. For dieameter < 35 mm, an
open groove is necessary.
In standard dimenstions or as per your specifica-
tions.
Please do not hesitate to contact our service
department.
EXAMPLE FOR ORDERDuoset sealing sets DS4-W for a rod diameter fo
100 mm: DUSOET DSs 4-W 100
RECOMMENDED VALUES FOR APPLICATION:(other temperature ranges upon request)
p (bar) t(°C) v (m/s)
- 20≤500 up to ≤5
+ 120
admissible clearance b;
up to p = 350 bar: C = L
D = 10 - 40 b(zul) = 0,3 - 0,0006p
D = 41 - 360 b(zul) = 0,4 - 0,0007p,
For p > 350 bar we recommend fit H8/f7
rounded edges
71
DS4-W -WB -WS DUOSET SEALING SET, ROD SEAL
72
EUS1-HN EUROSET PACKING, ROD SEAL
SEAL PROPERTIESLE• PTFE slide ring: clamping element (O-ring)
• high sealing effect at low friction
• no stick slip
• very long service lives also in the case of
poor lubrication conditions
• less space required and easy installation
areas
• for pressure admission on one or on both
sides
• a good sealing pressure is achieved with the
application of the operating pressure and by
pretensioning
APPLICATION• rod seal in hydraulic systems
• shaft seal
• hinges and rotary transmission leadthrough at
low speed
MATERIALEURAFLON® (PTFE) compound clamping ele-
ment (O-ring) made of elastomer. For further
materials, please refer to the general table.
INSTALLATIONTo be latched into the closed groove by reni-
form deformation. For diameter d<35 mm, an
open groove is necessary.
AVAILABILITYin standard dimensions or as per your specifi-
cations. Please do not hesitate to contact us.
73
EUS1-HN EUROSET PACKING, ROD SEAL
HECKER EUROSET-SEALING SET SERIES EUS1-HN, EUS2-HN AND EUS3-HN
EXAMPLE FOR ORDER:Euroset-sealing set EUS1-HN for a rod diameter of 100 mm: EUROSET EUS1-H 100
RECOMMENDED VALUES FOR APPLICATIONother temperature ranges upon request
Hydraulic systems: p (bar) ≤ 500
t (°C) -30 up to +120
v (m/s) ≤ 5
Pneumatic systems: p (bar) ≤ 16
t (°C) -30 up to +120
v (m/s) ≤ 5
admissible clearance b; up to p = 350 bar: C = L
D = 10 - 40 b(zul) = 0,3 - 0,0006p
D = 41 - 360 b(zul) = 0,4 - 0,0007p,
for p > 350 bar we recommend fit H8/f7
rounded edges
74
DK4-W, -WB, -WS DUOSET PACKING, CYL. SEAL
SEAL PROPERTIES• PTFE slide ring: clamping element (O-ring)
• high sealing effect at low friction
• no stick slip
• very long service lives
• less space required and easy installation
areas
• high specific surface pressure
• a good sealing pressure is achieved with the
application of the operating pressure and by
pretensioning
• single or tandem arrangement
APPLICATIONPiston seal in hydraulic systems, pressure
admission on one side.
MATERIALEURAFLON® (PTFE) compound with clamping
element (O-ring) made of elastomer. For further
materials, please refer to the general table.
INSTALLATION• With installation tools as per attached drawing
• Heating of the slide ring to approx. 100°C
facilitates the installation procedure
AVAILABILITYIn standard dimensions or as per your specifi-
cations. Please do not hesitate to contact our
service department.
rounded
edges
upsetting sleeveExpansion sleeve (slotted)
installationcone
75
EUK1-HN EUROSET PACKING, CYLINDER SEAL
SEAL PROPERTIES• PTFE slide ring: elastic clamping element (O-
ring)
• high sealing effect at low friction
• no stick-slip
• very long service lives also in the case of
poor lubrication conditions
• less space required and easy installation
areas
• a good sealing pressure is achieved with the
application of the operating pressure and by
pretensioning
• if necessary with pressure compensating
grooves.
APPLICATION• piston seal in hydraulic systems pressure
admission on both sides.
MATERIALEURAFLON (PTFE) compound with clamping
element (O-ring) made of elastomer. For further
materials, please refer to the general table.
INSTALLATION• with installation tools as per attached drawing
• heating of the slide ring to approx. 100°C faci-
litates the installation procedure.
AVAILABILITYIn standard dimensions or as per your specifi-
cations. Please do not hesitate to contact our
service department.
rounded
edges
upsetting sleeveExpansion sleeve (slotted)
installationcone
76
HECKER EUROSET-SEALING SET SERIES EUK1-H, EUK2-H AND EUK3-H
EXAMPLE FOR ORDEREuroset-sealing set EUK1-H for a cylinder diameter of 100 mm: Euroset EUK1-H 100
RECOMMENDED VALUES FOR APPLICATIONother temperature ranges upon request
Hydraulic systems: p (bar) ≤ 500
t (°C) -30 up to +120
v (m/s) ≤ 5
Pneumatic systems: p (bar) ≤ 16
t (°C) -30 up to +120
v (m/s) ≤ 5
admissible clearance b; up to p = 350 bar: C = L
D = 20–80, bzul = 0,3 – 0,0006 p
D = 81-400, bzul = 0,4 – 0,0007 p
For p>350 bar we recommend fit H8/f7
rounded edges
EUK1-HN EUROSET PACKING, CYLINDER SEAL
77
PKS1/PKK1 SEAL FOR PNEUMATIC SYSTEMS
SEAL PROPERTIES AND APPLICATION• rod and cylinder seal for pneumatic systems
• low friction
• lubricating film by optimum profile arrange-
ment
• very long service lives
• symmetrical profile, easy installation
• pressure admission on one side or on both
sides
RECOMMENDED VALUES FOR APPLICATION
SEALING OPERATING HYDRAULIC SYSTEMSMATERIAL MEDIUM p(bar) t(°C) v(m/s)
413 compressed ≤ 16 -35 ≤ 1 707 air up to +80
For further materials, please refer to the gene-
ral table. Fitting auxiliary / burrfree rounded
INSTALLATION• to be latched
• no sharp edges, please do not use sharp
installation tools
relief well
rounded edges
insertion chamfers
fitting auxiliary / burrfree rounded
D d2 h d L d1
12 7,2 1,5 2-09826 5,2 1,7 6,814,7 7,1 2 2-12954 5,2 2,3 6,815 7,4 2 2-09963 5,2 2,3 6,818 10,4 2 2-11072 7,5 2,3 11,220 12,4 2 2-11871 9,5 2,3 11,225 17,4 2 2-12877 14,5 2,3 16,230 22,4 2 2-09571 19,5 2,3 21,230 24,2 1,5 2-09473 21 1,7 22,732 24,4 2 2-11518 21,5 2,3 23,235 25 2,5 2-11718 21,5 3 23,240 30 2,5 2-09475 26,5 3 28,245 35 2,5 2-09466 31,5 3 33,250 39 2,5 2-11184 36,5 3 37,250 40 2,5 2-12510 36,5 3 39,260 46 3 2-09572 42,5 3,5 44,263 49 3 2-11235 45,5 3,5 47,270 58 3 2-09701 54,5 3,5 56,274 62 3 2-12728 58,5 3,5 60,280 63,4 3,5 2-11313 60 4,1 61,782 65,4 3,5 2-09846 62 4,1 63,7100 83,8 4 2-11519 80 4,6 81,7102 85,4 4 2-09931 82 4,6 83,7110 93,4 4 2-12729 90 4,6 91,7118 99 4,5 2-11010 95 5,1 96,7125 104,4 4,5 2-09476 100 5,1 101,7127 106,4 4,5 2-09806 102 5,1 103,7150 126,4 5,5 2-09932 122,5 6,2 124160 135,6 5,5 2-09995 132 6,2 134175 151 6 2-11335 148 6,7 150180 156 6 2-09799 152 6,7 154222 190 8 2-11044 186 8,8 188255 223 8 2-11045 219 8,8 221
d D2 h D L D1
16 21,4 1,5 2-09478 24 1,8 22,3
16 25 2 2-09472 27 2,3 25,4
20 27,6 2 2-09479 30 2,3 28,4
22 29,6 2 2-12421 32 2,3 30,4
30 39 2 2-11762 41 2,3 39,5
36 46 2,5 2-11763 48 3 46,4
45 57 2,5 2-11764 59 3 57,4
60 74 3 2-11240 77 3,5 75,4
90 106,6 3,5 2-11241 110 4,1 108,4
Nennmasse NutmasseWerkzeug-Nr.
Zylinderdichtung PKK1
Nennmasse Nutmasse
Stangendichtung PKS1
Werkzeug-Nr.
SEALING OF A CYLINDER PKK1
Bore Ø 1,5mm diam. pitch circle diameter Ød1
or D1 only possible for pressure admission on
one side (arrangement on pressure side).
SEALING OF A PISTON ROD
1 ,6
0 ,4
C
S
D d
Ø 1
,5
h
L+ 0,1
21H8
f 7
20
° -3
0°
dd
1 ,6
0 ,4
D dS
Ø 1
,5
L+ 0,1
H8
f 7
D20
°-3
0°
D1 2
hC
S 4 5 7,5 10 12,5 15 20 C 2 2,5 4 5 6,5 7,5 10
PKS 1 PKK 1
SEALING OF A CYLINDER PKK1
SEALING OF A PISTON ROD
nominal dimensions order no. dimension of grooves
nominal dimensions order no. dimension of grooves
106
HHEECCKKEERR®® GGSSMM®®
EEUUKK--PPEEUURROOSSEETT--PPAACCKKIINNGG
CCYYLLIINNDDEERR SSEEAALLPPNNEEUUMMAATTIICC
SSYYSSTTEEMMSS
EUK-P
SEAL PROPERTIES• PTFE slide ring, clamping element (O-ring)
• high sealing effect at low friction
• no stick-slip
• very long service lives also in the case of poor
lubrication conditions
• less space required and easy installation areas
• a good sealing pressure is achieved with the
application of the operating pressure and by pre-
tensioning.
APPLICATIONpiston seal in pneumatic systems
MATERIALEURAFLON® (PTFE)-com-
pound with clamping element
(O-ring) made of elastomer.
For further materials, please
refer to the general table.
INSTALLATION• with installation tools as per attached drawing
• heating of the slide ring to approx. 100°C facili-
tates the installation procedure
installation cone 0,4
expansion sleeve (slotted) upsetting sleeve
p
AVAILABILITYAs to the dimensions available, please contact
our service department.
K a n tea b ru n d e n
0 ,4
D+
0,8
%D
rounded
edge
107
D d L
8 3,6 2,2 EUK1-P 8 0,1
10 5,6 2,2 EUK1-P 10 0,1
12 7,6 2,2 EUK1-P 12 0,1
16 11,6 2,2 EUK1-P 16 0,1
20 15,6 2,2 EUK1-P 20 0,1
25 20,6 2,2 EUK1-P 25 0,1
32 25,6 3,2 EUK1-P 32 0,2
40 33,6 3,2 EUK1-P 40 0,2
50 43,6 3,2 EUK1-P 50 0,2
63 54,2 4,2 EUK1-P 63 0,3
80 71,2 4,2 EUK1-P 80 0,3
100 91,2 4,2 EUK1-P 100 0,3
125 116,2 4,2 EUK1-P 125 0,3
160 151,2 4,2 EUK1-P 160 0,3
200 187,2 6,3 EUK1-P 200 0,5
250 237,2 6,3 EUK1-P 250 0,5
RNennmaß
Bestell-Nr.
HECKER EUROSET SEALING SETSeries EUK1-P
EXAMPLE FOR ORDEREuroset-sealing set EUK1-P for a cylinder dia-
meter of 100 mm:
Euroset EUK1-P 100
RECOMMENDED VALUESFOR APPLICATION
other temperature ranges upon request
p (bar) t (°C) v (m/s)
≤ 25 - 30 up to +120
≤ 5 Pneumatic systems
HHEECCKKEERR®® GGSSMM®®
EEUUKK--PPEEUURROOSSEETT--PPAACCKKIINNGG
CCYYLLIINNDDEERR SSEEAALLPPNNEEUUMMAATTIICC
SSYYSSTTEEMMSS
rounded edges
(Order no.)nominal dimensions
108
EUS-P
SEAL PROPERTIES• PTFE slide ring: clamping element (O-ring)
• high sealing effect at low friction
• no stick slip
• very long service lives also in the case of poor
lubrication conditions
• less space required and easy installation areas
• a good sealing pressure is achieved with the
application of the operating pressure and by pre-
tensioning
APPLICATION• rod seal in pneumatic systems
• shaft seal
• shaft seal for slow rotating and pivoting motion
MATERIALEURAFLON® (PTFE)-
compound with clamping
element (O-ring) made of
elastomer. For further
materials, please refer to
the general table.
INSTALLATION To be latched into the closed groove by reniform
deformation. For diameter d<30 mm, an open
groove is necessary.
p
AVAILABILITYAs to the dimensions available, please contact
our service department.
O -R in g
HHEECCKKEERR®® GGSSMM®®
EEUUSS--PPEEUURROOSSEETT--PPAACCKKIINNGG
RROODD SSEEAALLPPNNEEUUMMAATTIICC
SSYYSSTTEEMMSS
109
d D L
6 10,4 2,2 EUS1-P 6 0,1
8 12,4 2,2 EUS1-P 8 0,1
10 14,4 2,2 EUS1-P 10 0,1
12 16,4 2,2 EUS1-P 12 0,1
14 18,4 2,2 EUS1-P 14 0,1
16 20,4 2,2 EUS1-P 16 0,1
18 22,4 2,2 EUS1-P 18 0,1
20 24,4 2,2 EUS1-P 20 0,1
22 26,4 2,2 EUS1-P 22 0,1
25 29,4 2,2 EUS1-P 25 0,1
28 34,4 3,2 EUS1-P 28 0,2
30 36,4 3,2 EUS1-P 30 0,2
32 38,4 3,2 EUS1-P 32 0,2
36 42,4 3,2 EUS1-P 36 0,2
40 46,4 3,2 EUS1-P 40 0,2
45 51,4 3,2 EUS1-P 45 0,2
50 56,4 3,2 EUS1-P 50 0,2
56 64,8 4,2 EUS1-P 56 0,3
60 68,8 4,2 EUS1-P 60 0,3
63 71,8 4,2 EUS1-P 63 0,3
70 78,8 4,2 EUS1-P 70 0,3
80 88,8 4,2 EUS1-P 80 0,3
90 98,8 4,2 EUS1-P 90 0,3
100 108,8 4,2 EUS1-P 100 0,3
110 118,8 4,2 EUS1-P 110 0,3
125 133,8 4,2 EUS1-P 125 0,3
140 148,8 4,2 EUS1-P 140 0,3
160 168,8 4,2 EUS1-P 160 0,3
180 192,8 6,3 EUS1-P 180 0,5
200 212,8 6,3 EUS1-P 200 0,5
NennmasseBestell-Nr. R
HECKER EUROSET SEALING SETSERIES EUS1-P
EXAMPLE FOR ORDEREuroset sealing set EUS1-P for a rod diameter
of 100 mm:
Euroset EUS1-P 100
RECOMMENDED VALUESFOR APPLICATION
other temperature ranges upon request
C = L
p (bar) t (°C) v (m/s)
≤ 25 - 30 up to +120
≤ 5 Pneumatic systems
p
1 ,6
R 0 ,2 m a x .
0 ,4
K a n te n a b ru n d e n
p
b
C
d DH
9
h8
L+0,2
R R
15°
HHEECCKKEERR®® GGSSMM®®
EEUUSS--PPEEUURROOSSEETT--PPAACCKKIINNGG
RROODD SSEEAALLPPNNEEUUMMAATTIICC
SSYYSSTTEEMMSS
rounded edges
nominal dimensions(Order no.)
110
HHEECCKKEERR®® GGSSMM®®
UUNNAA--PP && UUNNII--PPUU--RRIINNGG
PPNNEEUUMMAATTIICCSSYYSSTTEEMMSSCCYYLLIINNDDEERR
&& RROODD SSEEAALL
UNA-P UNI-P
APPLICATION• cylinder seal for pneumatic systems (UNA-P) & rod seal
for pneumatic systems (UNI-P)
• low friction by means of an optimum profile design
• application in the case of dry, oilfree compressed air
• lubrication only one time during installation
• small installation areas
• installation within closed grooves
RECOMMENDED VALUESFOR APPLICATIONFor further materials please refer to the general table
EXAMPLE FOR ORDER
U-Ring UNA-P for a cylinder diameter of 63 mm:
UNA-P 63x53x4,2
TOOLS UNA-P (UNI-P TOOLS ON ENQUIRY)
NOMINAL DIMENSION TOOL-NO. WIDTH OF GROOVE L
D d H
20 14 2,5 2-11910 3
25 19 3,2 2-12021 3,5
26 20 3,25 2-12883 3,5
30 22 3,2 2-12010 3,5
35 27 3,25 2-12248 3,5
44 36 3,2 2-12656 3,5
50 42 3,2 2-12374 3,5
63 53 4,2 2-12375 4,5
69 60 7,5 2-12246 8,5
70 60 4,25 2-12265 5,2
80 64 8 2-12789 9
200 170 16 2-12326 18
Pneumatic systems Sealing material
Operating medium p (bar) t (°C) v (m/s
707
Compressed air
≤ 16
-30 up to +80
≤ 1
CYLINDER SEAL UNA-P
C = L
ROD SEAL UNI-P
C = L
K a n te n a b ru n d e n
0 ,4
1 ,6
R 0 ,2 m a x .
p
L
15
°+ 0 ,2
R R
d
D
h9
H8
C
p
Kanten abrunden
0,4
R0,2 max.
1,6
L
C
15
°
+ 0 ,2
R R
d D
h8 H
9
rounded edges
rounded edges
111
d D H
8 18 10 2-11104 10,5
10 20 10 2-11069 10,5
12 22 10 2-11106 10,5
12 24 10 2-11735 10,5
16 26 10 2-11107 10,5
18 28 10 2-11401 10,5
20 30 10 2-11402 10,5
22 32 10 2-11403 10,5
NennmaßeWerkzeug-Nr. Einbaulänge L
L
H
d D
An elastomer sealing element which fits into
already existing stuffing box areas without
any changes in construction.
Depending on the respective service condi-
tions (media, temperature, pressure) we are
able to deliver materials based on silicone,
perbunane, EPDM and fluororubber.
The advantage of these seals is a completely
self-acting and maintenance-free functioning.
A mechanical retightening of the seal by con-
necting bushings or screw nuts is not requi-
red. Furthermore, a constructively unavoida-
ble excentrical mismatch of the shafts relati-
ve to their housings is equalized to a certain
rate. Due to the geometrical design of the
inside structure a closed gap is produced
which can be filled with a suitable lubricant
ensuring an extremely high easy-running of
these soft elastomer seals.
AVAILABILITYFor the dimensions available, please con-
tacdt us.
ASD
HHEECCKKEERR®® GGSSMM®®
AASSDD 11AARRMMAATTUURREE
SSHHAAFFTT SSEEAALL
nominal dimensions(Order no.) installation length L
112
AKD
APPLICATION IN• butterfly valves for the food industry
• chemical industry
• water treatment
• hydraulic oil supply etc.
MATERIALS BASED ON• VMQ
• NBR
• EPDM
• FPM
• HNBR
Concerning approval certificates for FDA-,
KTW-, DVGW- and BAM, please refer to
section “materials”
DESIGNDue to the great constructional variety of
butterfly valves the arrangement of the
gasket will be fixed in cooperation with the
customer, i.e. according to his special requi-
rements.
Please contact our experienced technical
service department.
HHEECCKKEERR®® GGSSMM®®
AAKKDDBBUUTTTTEERRFFLLYY
VVAALLVVEE SSEEAALL
113
ABR1 ABR2
ABR3
PROFILE PROPERTIES• staple wiping lip, rigid element
• ABR1 to be latched into the groove
• ABR2 same function as ABR1, with additional
supporting and sealing collar
• ABR3 same function as ABR1, flush mounted
with the housing.
APPLICATION• scraper for rods in hydraulic and pneumatic
systems
• removing solid and liquid contaminants
INSTALLATION• latched into the groove starting
from d > 30mm
• open groove for d < 30 mm
AVAILABILITYFor the dimensions available please contact
us. In the case of new constructions, we
recommend the use of series ABR3. Further
dimensions upon request.
MATERIALSStandard materials WS 859 NBR 90Sha. For
further materials please refer to the general
table.
EXAMPLE FOR ORDERScraper ABR3 for a rod diameter of 63 mm:
ABR 3 - 63
RECOMMENDED VALUESFOR APPLICATION
Seal Material
Operating media
t (°C)
v (m/s)
859 -20
up to +110
900
Mineral oil, oil-water-
emulsions, air
-25 up to + 80
≤ 1
HHEECCKKEERR®® GGSSMM®®
AABBRR
SSCCRRAAPPEERRRROODD SSCCRRAAPPEERR
114
ROD SCRAPER ABR1 AND ABR2
ROD SCRAPER ABR3
INSERTION CHAMFER
d D H h h1 GummiPolyure-
thanD1 a
4 8 3 2 2-08842 6,2 15 9 3 2 2-08843 7,2 16 10 3 2 2-08844 8,2 17 11 3 2 2-08849 9,2 18 12 3 2 2-08845 10,2 18 14 5 3 2-08974 12,5 18 16 7 5 4 2-10001 14 1 3
9,3 14 5 3,4 2,4 2-11210 12,5 1 310 14 3 2 2-08846 12,2 110 18 7 5 4 2-05737 16 1 310 18 7 5 4 2-10002 16 1 310 18 7 5 V-1424 14 111 19 7 5 4 2-07836 17 1 3
11,8 20 7 4,2 V-2655 16 112 20 7 5 2-04178 15 112 20 7 5 2-08759 16 112 20 7 5 4 2-10003 18 1 312 20 7 5 V-1425 15,5 112 20 7 5 V-1271 15 112 20 7 5 V-2461 16 2
12,7 20 7 5 4 2-11211 18 1 314 22 7 5 4 2-10004 20 1 3
14,2 22 7 5 4 2-11212 20 1 315 23 7 5 2-09338 19,6 115 23 7 5 V-1426 19 1
15,8 25 7 5 V-1660 21 116 24 7 5 2-13041 19 116 24 7 5 4 2-08332 22 1 316 24 7 5 4 2-10005 22 1 316 32 7 5 V-2059 21 118 26 7 5 4 2-10006 24 1 318 26 7 5 V-0964 21 119 25 7 5 4 2-11213 23 1 320 26 7 4 2-08724 25 120 26 7 5 V-2801 24 120 28 5 3,5 V-1371 24 120 28 7 5 4 2-08333 26 1 320 28 7 5 4 2-10007 26 1 320 28 7 5 V-2266 24 120 30 9 6 V-1485 27 122 30 7 5 2-08726 25 122 30 7 5 4 2-08334 28 1 322 30 7 5 4 2-10008 28 1 322 30 7 5 V-1427 25 1
22,3 30 7 5 V-1606 26 124 32 7 5 2-11682 28 224 32 7 5 V-1433 28 124 32,4 5,6 3,5 2-11902 27,5 125 33 5 3,5 2-06856 29 125 33 5 3,5 V-1372 29 125 33 7 5 4 2-09439 31 1 325 33 7 5 4 2-10009 31 1 325 33 7 5 2-13042 28 125 33 7 5 V-1744 30 125 36 8,2 6 V-1887 31 126 34 7 5 2-07783 30 126 34 7 5 4 2-10202 32 1 326 34 7 5 V-2253 30 128 36 7 5 4 2-07098 34 1 328 36 7 5 4 2-10010 34 1 3
ABR-Typ
Dichtungsnennmasse Werkzeug-Nr.
ABR1 ABR2
ABR3
Width of groove: L = h +0,1 up to +0,3
S 3 4 5 6 7,5 10 12,5
C 1,5 2 2,5 3 4 5 6
ABR1
ABR2
ABR3
1 ,6
0 ,4
d
H
D
D
+ 0,2
+ 0,2
1
20
° -3
0°
A B R 1
S
A B R 2
CL
h
1 ,6
0 ,4
d
C
20
° -3
0°
D1
+0,2D
+0,2
a
h 1
h
S
L
nominal dimensions tool-no.
tool-no.Polyur
ethan
115
d D H h h1 GummiPolyure-
thanD1 a
28 36 7 5 V-2064 32 129 37 7 5 V-1070 33 1
29,6 37 7 5 V-1553 34 129,6 37 7 5 V-2034 34 230 38 7 5 4 2-08335 36 1 330 38 7 5 4 2-10011 36 1 330 38 7 5 V-0862 34 130 40 6,5 4 V-1253 35 230 40 10 7 5,5 2-05935 37 1,5 330 42 10 7 V-2317 36 1
30,9 40 7 5 V-2212 35 231,5 40 7 5 V-1614 36 131,75 41,28 7,14 4,8 2-09760 36 1
32 40 7 5 2-09440 332 40 7 5 3,7 2-09668 37,5 1,3 332 40 7 5 4 2-10012 38 1,2 332 40 7 5 V-2292 36 132 47 7 5 2-11683 37 132 47 7 5 V-2072 36 133 41 8 5 4 2-07459 39 1 335 43 7 5 2-06288 39 135 43 7 5 4 2-10013 41 1 335 43 7 4,8 V-2002 39,5 135 43 7 5 V-0863 39 135 45 8 4,5 V-1462 41 136 44 7 5 4 2-10014 42 1 336 44 7 5 V-1943 41 1
37,85 50 6,5 4 V-2213 44 238 46 7 5 V-1488 42 238 46 11,5 9 V-1989 42 138 48 7 5 V-1607 43 138 48 10 7 V-1936 43 138 50 6,5 4 V-2041 43 239 47 7 5 2-08098 43 140 48 7 2-05231 340 48 7 5 4 2-10015 46 1 340 48 7 5 V-2066 44 140 48 7 5 V-0864 44 240 50 6,5 4 V-1229 45 240 50 8 5 V-1450 45 242 50 7 5 V-0865 46 242 52 10 7 V-2039 47 144 58 6 3 V-0866 49 245 53 7 5 4 2-06520 51 1 345 53 7 5 4 2-10016 51 1 345 53 7 5 V-0999 49 145 57 10,5 6 V-1466 53 145 57,2 12 7,5 V-1017 52 148 56 7 5 V-1709 53 1
48,86 60 7 5 V-2056 53 249 57 7 5 V-0852 52 150 58 7 5 2-06289 V-0867 55 150 58 7 5 4 2-05830 56 1 350 58 7 5 4 2-10017 56 1 350 60 7 5 2-13043 53 150 62 8 5 V-1242 56 250 62 8 4,8 V-1228 55 250 62 10 7 2-05936 59 1,5 350 62 12 7 2-07178 58 150 65 13 7 V-1461 60 1
ABR-Typ
Dichtungsnennmasse Werkzeug-Nr.
d D H h h1 GummiPolyure-
thanD1 a
50,8 63,5 10 6,35 2-07654 56,3 151 59 7 5 4 2-08741 57 1,2 352 60 7 5 4 2-07792 58 1 354 62 7 5 V-0868 58 155 63 7 5 4 2-05673 61 1 355 63 7 5 4 2-10018 61 1 355 63 7 5 V-1495 60 155 63 10 7 V-1650 60 155 67 8 4,8 V-1249 60 256 64 7 5 4 2-10019 62 1 356 64 7 5 V-2065 60 156 65 7 5 2-11955 60,8 156 66,6 7 5 2-13075 61 158 66 7 5 2-08588 63 158 66 7 5 2-07793 64 358 66 7 5 4 V-1966 64 1 359 67 7 5 V-0869 63 260 68 7 5 2-07119 64 160 68 7 5 4 2-08215 66 1 360 68 7 5 4 2-10020 66 1 360 68 7 5 V-0962 64 160 72 8 4,8 V-1163 65 260 72 10 7 5,5 2-05715 69 1,5 360 72,2 12 7,5 V-1018 66 160 75 8 5 V-3739 67 260 75 12 8 V-2345 68 160 80 7 5 2-06709 68 162 72 8 6 V-1513 67 162 72 10 7 5,5 2-05937 69 1,5 363 71 7 5 4 2-10021 69 1 364 73 7 5 V-1364 69 265 73 7 5 2-08097 69 165 73 7 5 V-1315 69 165 73 7 5 V-1369 69 165 77 8 4,8 V-2975 70 268 76 7 5 4 2-08621 74 1 368 80 12 7 2-06989 75 169 77 7 5 V-0851 72 2
69,1 80 8 5 V-2061 74 270 78 7 5 4 2-07791 76 1 370 78 7 5 4 2-10022 76 1 370 78 7 5 V-2494 75 170 80 7 5 2-13044 73 170 82 8 4,8 2-09886 75 270 82 8 4,8 V-0843 75 270 85 10 6 V-1489 76 270 85 13 9 V-2346 76 1
70,5 80 7 5 V-1538 75 272 80,6 7 5,2 V-3665 77,1 274 86 8 4,8 V-2365 79 275 83 7 5 V-1769 79 175 87 8 4,8 2-08972 80 175 87 8 4,8 V-1153 80 2
76,2 88,9 8 6,35 2-08038 81 178 86 7 5 2-11290 82 178 86 7 5 V-0963 82 178 90 8 4,8 V-1069 82 280 88 7 5 V-1000 84 180 88 7 5 4 2-05490 86 1 380 88 7 5 4 2-10023 86 1 3
ABR-Typ
Dichtungsnennmasse Werkzeug-Nr.
ABR1
ABR2
ABR3
nominal dimensions nominal dimensionstool-no. tool-no.
tool-no. tool-no.Polyur
ethan
Polyur
ethan
116
d D H h h1 GummiPolyure-
thanD1 a
80 88 7 4 V-3516 84 180 92 8 4,8 2-09884 85 280 92 8 4,8 V-1162 85 280 95 10 6 V-3143 86 180 96 10 7 V-1523 88 1
82,5 95,5 8,35 6,35 V-2199 86 185 93 7 5 V-0980 88 185 97 8 4,8 2-08983 90,4 185 97 8 4,8 V-1154 91 289 97 7 5 V-0870 93 290 98 7 5 3,8 2-09078 96 1,2 390 98 7 5 4 2-10024 96 1 390 98 7 5 V-1065 94 190 102 8 4,8 V-0908 94 290 102 12 7 2-13045 96 1
92,1 111,1 18,5 15,5 2-11153 105 195 107 8 4,8 V-1172 100 297 105 7 5 2-11291 101 197 105 7 5 V-0871 101 297 109,2 12 7,5 V-1019 103 1
97,7 112 8 4,8 V-2060 102 298,3 114,3 10 6,35 V-1964 106 199 107 7 5 V-1370 103 1100 108 7 5 3,8 2-09239 106 1,2 3100 108 7 5 4 2-10025 106 1 3100 108 7 5 V-1057 104 1100 112 8 4,8 2-09447 105,5 2100 112 8 4,8 V-1155 104 2100 112 8 4,8 V-3291 105,7 1100 120 18 8 2-11866 110,5 1102 110 7 5 V-1001 105 1105 115 10 7 V-1528 110 1105 117 8 4,8 V-1171 109 2110 118 7 5 2-09335 114 1110 118 7 5 V-1008 113 1110 118 7 5 4 2-10026 116 1 3110 122 8 4,8 V-1051 114 2110 122,2 12 7 2-13076 117,4 1
117,5 136,5 18,5 15,5 2-11154 130 1118 126 7 5 2-11292 121,5 1118 126 7 5 V-0872 121,5 1120 132 10 6 V-1735 126 1120 135 10 6 V-1217 127 2
122,2 132 7 5 V-1646 128 1124 132 7 5 V-1967 127 1125 133 7 5 2-11857 129,2 1125 135 7 5 V-2298 129 1125 135 12 8 2-05343 132 1125 137 10 7 5,5 2-10027 134 1,5 3125 140 16 10 2-11952 133,2 1126 134 7 5 V-1076 130 1127 146 18,5 15 2-11156 140 1130 138 7 5 V-1284 134 1
133,8 150 10 6 V-2134 140 1135 150 10 6 V-1753 143 1139 154 10 6 V-2448 145 1140 152 10 7 5,5 2-10029 149 1,5 3140 155 10 6 2-09448 146 2140 155 10 6 V-1059 146 2140 155 10 6 V-3283 147 1
ABR-Typ
Dichtungsnennmasse Werkzeug-Nr.
d D H h h1 GummiPolyure-
thanD1 a
143 151 7 5 2-11293 147 1150 160 8 6 V-1116 154 1
154,5 165 8 6 V-2393 159 1155 167 10,5 7 5,5 2-11363 164 2 3160 170 8 6 V-1306 163 1160 172 10 7 5,5 2-05569 169 1,5 3160 175 10 7 2-08054 166 2160 175 10 6 V-0835 167 2170 185 12 7 2-09449 176,5 2171 179 7 5 2-11294 175 1175 185 8 6 V-1117 181 1180 195 10 8 V-1492 189 2180 200 18 10 2-09067 191 1180 220 10 7,5 V-0065 189 2185 205 14,5 12 2-07058 195 3200 212 10 8 6 2-05522 208 2 3200 212 10 7 5,5 2-06836 209 1,5 3200 215 10 6 V-0836 206 2210 230 14,5 12 10 2-07039 220 2 3211 227 12 8 2-06951 218 1213 227 14,5 9,5 6,5 2-06488 222 3 3214 230,5 13 10 8 2-11365 221,5 2 3225 255 15 7,5 V-2654 235 2236 256 15,5 12 10 2-07059 246 2 3240 254 14,5 9,5 6,5 2-06486 249 3 3250 260 8 5 2-08498 255 1250 270 12 8 V-0783 258 2260 280 12 8 2-07246 268 1260 280 12 8 V-1483 268 1260 280 14,5 12 10 2-07130 270 2 3280 300 18 10 2-09913 290 1285 305 18 13 10 2-08523 295 3 3300 320 12 8 V-1667 311 1310 330 12 8 V-0837 317 2310 330 14,5 12 10 2-07558 320 2 3320 340 12 8 V-0838 327 2320 340 18 10 2-09068 332 1340 360 12 8 V-2240 348 1349 369 14,5 12 10 2-08182 359 2 3360 380 10 8 V-1763 370 1360 380 14,5 12 10 2-07559 370 2 3400 420 12 8 V-1602 412 2400 425 16 11,5 V-1877 412 1430 455 15 10 2-09822 440 1455 470 13 8,5 6,2 2-08622 466 2 3480 505 23 11,5 2-12663 490 1500 512,2 12 7 2-12654 505,5 1500 520 12 8 V-1878 510 1500 525 23 19 11,5 2-11705 512 7,5 3600 625 20 12,5 V-2511 612 1680 699,6 10 5,5 2-11163 688,5 1700 740 25 12,5 V-3403 719 1
ABR-Typ
Dichtungsnennmasse Werkzeug-Nr.
ABR1
ABR2
ABR3
nominal dimensions nominal dimensionstool-no. tool-no.
tool-no. tool-no.Polyur
ethan
Polyur
ethan
117
HHEECCKKEERR®® GGSSMM®®
AABBFF SSCCRRAAPPEERR
FFLLAATT BBEELLTT SSCCRRAAPPEERR
ABF1
Nennmasse
Einbaumasse
H B s
max. Liefer-länge
Werkzeug- Nr.
a b d e R 10 9,6 11 10,6 12 11,6
••13 12,6 14 13,5 15 14,5
••16 15,5 17 16,5 18 17,5 19 18,4
10
20
3 800 V-0830 3,5
19,4
11 2,9 1
• = bei Neukonstruktionen bevorzugen
Nennmasse
H B S
max. Liefer-länge
Werkzeug-Nr.
Einbau- Masse
b 15 250 V-1733 14,5 10 17
4 500 V-2006 15
ABF2
PROFILE ANDINSTALLATION
ABF1ABF2
(WITH METAL RAIL)AAPPPPLLIICCAATTIIOONN
• sliding surfaces
• guide belts
• machine tools
MMAATTEERRIIAALLSSPolyurethane PU 94 Shore A,
preferably WS 900 (Vulkollan)
H
B
d
b
s
a
e
b
H
B
s
nominal dimensions
nominal dimensions
installation dimensionsmax.
length to
be deli-
vered
max. length
to be deli-
vered
Tool-no.
Tool-no.installation
dimensions
b
preferably for new constructions
118
d d1 L
6 9,1 KF1-S 6
8 11,1 KF1-S 8
10 13,1 KF1-S 10
12 15,1 KF1-S 12
14 17,1 KF1-S 14
16 19,1 KF1-S 16
18 21,1 KF1-S 18
20 25 KF1-S 20
22 27 KF1-S 22
25 30 KF1-S 25
28 33 KF1-S 28
30 35 KF1-S 30
32 37 KF1-S 32
35 40 KF1-S 35
36 41 KF1-S 36
40 45 KF1-S 40
45 50 KF1-S 45
50 55 KF1-S 50
55 60 KF1-S 55
56 61 KF1-S 56
60 65 KF1-S 60
63 68 KF1-S 63
70 75 KF1-S 70
80 85 KF1-S 80
90 95 KF1-S 90
100 105 KF1-S 100
110 115 KF1-S 110
120 125 KF1-S 120
125 130 KF1-S 125
135 140 KF1-S 135
140 145 KF1-S 140
150 155 KF1-S 150
160 165 KF1-S 160
170 175 KF1-S 170
180 185 KF1-S 180
190 195 KF1-S 190
200 205 KF1-S 200
220 225 KF1-S 220
250 255 KF1-S 250
270 275 KF1-S 270
280 285 KF1-S 280
320 325 KF1-S 320
360 365 KF1-S 360-0,2
-0,4
h H
Ringmasse
-0,1
-0,1
-0,2
-0,2
-0,4
+0,02
-0,03
2,5
Einbaumasse
4 1,55
Bestell-Nr.
5,6
9,7
15
25 25
+0,02
-0,03
3,9
5,5
9,5
15
R 0 ,2 m a x .
1 ,6
0 ,4
R 0 ,3 m a x .
b
d d
hl
1H
8
f7
3 0 °
L+ 0 ,2
H
bzul = 0,15 für d 6 – 40 mm
bzul = 0,2 für d 41 – 360 mm
I = π (d + h) ⋅ 0,99
KF-S
SSTTAANNDDAARRDD VVAALLUUEESS FFOORR AAPPPPLLIICCAATTIIOONNp (N/mm²) t (°C) v (m/s)
< 2,5 -100 up to +200 < 5
P = F/A (proj) = surface pressure (N/mm²)
F = transverse action force (N)
A(proj) = proj. surface (d1 * H (mm²))
MMAATTEERRIIAALLStandard design WS 7280 available from stock - a
PTFE-bronze compound.
EEXXAAMMPPLLEE FFOORR OORRDDEERRSSRod guide KF1-S for a rod diameter of 63 mm:
KFF11--SS 6633
HHEECCKKEERR®® GGSSMM®®
KKFF--SS EEUURRAAFFLLOONN®®--((PPTTFFEE))
GGUUIIDDEE RRIINNGGRROODD GGUUIIDDEE
SSEERRIIEESS
installation dimensions order
number
ring dimensions
bzul=0,15 for d 6 - 40 mm
bzul=0,2 for d 41 - 360 mm
119
D D1 L
16 12,9 KF1-K 16
20 16,9 KF1-K 20
22 18,9 KF1-K 22
25 21,9 KF1-K 25
28 23 KF1-K 28
30 25 KF1-K 30
32 27 KF1-K 32
35 30 KF1-K 35
40 35 KF1-K 40
45 40 KF1-K 45
50 45 KF1-K 50
60 55 KF1-K 60
63 58 KF1-K 63
70 65 KF1-K 70
80 75 KF1-K 80
100 95 KF1-K 100
125 120 KF1-K 125
140 135 KF1-K 140
150 145 KF1-K 150
160 155 KF1-K 160
180 175 KF1-K 180
200 195 KF1-K 200
220 215 KF1-K 220
250 245 KF1-K 250
280 275 KF1-K 280
300 295 KF1-K 300
320 315 KF1-K 320
400 395 KF1-K 400
-0,1
5,5
9,5
15
-0,1
-0,2
-0,2
3,9
9,7
15
25 25
2,5 +0,02 -0,03
-0,2 -0,4
4
5,6
1,55 +0,02 -0,03
EinbaumasseBestell-Nr.
Ringmasse
h H
R 0 ,2 m a x .
0 ,4
1 ,6
lh
b
1 5 °
L+ 0 ,2
3 0 °
H
Ø D
Ø D
1
h8
H8
R 0 ,3 m a x .
bzul = 0,3 für d 16 – 80 mm bzul = 0,2 für d 81 – 400 mm
I = π (D - h) ⋅ 0,99
KF
SSTTAANNDDAARRDD VVAALLUUEESS FFOORR AAPPPPLLIICCAATTIIOONNp (N/mm²) t (°C) v (m/s)< 2,5 -100 up to +200 < 5
P = F/A (proj) = surface pressure (N/mm²)F = transverse action force (N)A(proj) = proj. surface (D1 * H (mm²))
MMAATTEERRIIAALLStandard design WS 7280 available from stock - aPTFE-bronze compound
EEXXAAMMPPLLEE FFOORR OORRDDEERRSSPiston guide KF1-K for a piston diameter of 100 mm: KKFF11--KK 110000
HHEECCKKEERR®® GGSSMM®®
KKFF--KK EEUURRAAFFLLOONN®®--((PPTTFFEE))
GGUUIIDDEE RRIINNGGPPIISSTTOONN GGUUIIDDEE
SSEERRIIEESS
installation dimensions ordernumber
ring dimensions
bzul=0,3 for 16 - 80 mmbzul=0,2 for d 81 - 400 mm
120
OR
SEAL PROPERTIESO-Ring with circular cross section
STATIC SEALINGOn static parts, for example covers, hou-sings, flanges, bolts
DYNAMIC SEALING (AXIAL)• rod and cylinder seals in hydraulic andpneumatic systems• application limits, see diagram for d1 > 10 mm
PRESSURE-SPEED DIAGRAM
DYNAMIC SEALING (ROTATING)• peripheral speed under optimum condi-tions, (with appropriate lubrication and heatdissipation) up to max. 5ms-1
• armature shaft, hinges• for small installation areas
MATERIALSUsing the same tools, different shrinkage ofthe materials can result in displacement ofthe field of tolerances.
1
101520
30
40
50
60
70
80
90
100
5
0,1 0,2 0,3 0,4 0,5
Pneumatik max.
Übe
rdru
ck (b
ar)
Größte Stangengeschwindigkeit (m/s)
60 Shore A
90 Shore A
80 Shore A
70 Shore A
Maximum clearance in relation to pressure, mate-rial hardness and O-ring cross section
BACK-UP RINGSBack-up rings for compensating the clearancewhen the admissible clearance is exceeded
Back-up ring RE9 Back-up-ring SP1 Material PTFE Material PTFEor polyamide
O-Ring-cross section diameter -Ø hardness (ShoreA)
pressure (bar) 1,8 2,65 3,55 5,3 7 20 0,18 0,23 0,28 0,3 0,35 40 0,13 0,18 0,23 0,25 0,3 63 0,1 0,13 0,15 0,18 0,2
60
100 0,05 0,08 0,1 0,13 0,15 40 0,2 0,25 0,3 0,35 0,4 63 0,15 0,18 0,23 0,25 0,3
100 0,1 0,13 0,15 0,18 0,2 160 0,05 0,08 0,1 0,12 0,15
70
180 0,025 0,04 0,05 0,06 0,08 40 0,25 0,3 0,4 0,45 0,5 63 0,2 0,25 0,3 0,35 0,4
100 0,13 0,18 0,2 0,25 0,3 160 0,1 0,13 0,15 0,18 0,2 180 0,08 0,1 0,13 0,15 0,18
80
250 0,05 0,08 0,1 0,12 0,15 40 0,35 0,4 0,45 0,5 0,5 63 0,3 0,35 0,4 0,45 0,5
100 0,25 0,3 0,35 0,38 0,45 160 0,2 0,23 0,25 0,3 0,35 180 0,15 0,18 0,2 0,25 0,3 250 0,13 0,15 0,17 0,2 0,25
90
355 0,08 0,1 0,13 0,15 0,2
HHEECCKKEERR®® GGSSMM®®
SSUUPPPPOORRTT RRIINNGGSSFFOORR OO--RRIINNGGSS
&& OO--RRIINNGGSS
121
OR
INSTALLATION OF BACK-UP RINGS
The back-up rings are not standardized. Therespective dimensions and widths of groovesare determined individually for each application.For correct dimensioning of the back-up ringsrequired, we kindly ask you to fill in the followingtable:
OUTSIDE SEALING1. cylinder-Ø D2. diam. of root of groove-Ø D3 or
depth of groove S3. width of groove L1 oder L2
4. O-Ring cross section-Ø d2
5. sealing dynamic or static
INSIDE SEALING1. diameter of rod Ø d2. diam. of root of groove Ø d3 or
depth of groove S3. width of groove L1 oder L2
4. O-Ring cross section-Ø d2
5. sealing: dynamic or static
If the dimensions of the groove are selectedaccording to our table, points 2,3 and 4 can beomitted.
OUTSIDE SEALING
INSIDE SEALING
p
N u tb re ite
N u tb re ite
p
p
Nu
ttie
feN
utg
run
d
Zy
lind
er
L 2
- Ø
D3
- Ø
D
L 1
S
N u tb re ite
N u tb re ite
Nu
ttie
fe
p
pp
Sta
ng
en
L 2
Nu
tgru
nd
- Ø
d3
- Ø
d
L 1
S
HHEECCKKEERR®® GGSSMM®®PPRREECCIISSIIOONN OO--RRIINNGG
((RROOUUNNDD SSEEAALL))BBAACCKK UUPP RRIINNGGSS
FFOORR OO--RRIINNGGSS
width of the groove
width of the groove
width of the groove
width of the groove
diam
. of
groo
ve b
ase
diam
. of
groo
ve b
ase
dept
h of
groo
ve
dept
h of
groo
ve
diam
of
cylin
der
diam
of r
od
122
Hydraulik + Pneumatik Abdichtung: dynamisch (axiale Bewegung)
max. Nuttiefe S Nutbreite dynamisch Querschnitts-
Ø d2 Hydraulik Pneumatik L+0,2 L1+0,2 L2
+0,2 R R1 C
1 0,88 0,88 1,2 - - 1,2 1,07 1,07 1,4 - -
1,25 1,1 1,1 1,45 - - 1,5 1,3 1,35 1,7 2,9 4,1 1,6 1,4 1,45 1,9 3,1 4,3
1,8 (1,78) 1,55 1,6 2,1 3,3 4,5
0,1 1,2
2 1,77 1,8 2,3 3,5 4,7 2,4 2,12 2,15 2,8 4,4 6 2,5 2,2 2,25 2,9 4,5 6,1
2,65 (2,62) 2,35 2,35 3 4,6 6,2
1,5
3 2,65
-0,02
2,75
-0,02
3,4 5 6,6
0,1
3,15 2,8 2,9 3,6 5,6 7,6 3,5 (3,53) 3,2 3,25 4 6 8
0,2
2
4 3,6 3,7 4,5 6,5 8,5 4,5 4,1 4,2 5 7,5 10 0,3
5 4,55 4,65 5,5 8 10,5 5,3 (5,33) 4,82 5 5,9 8,4 10,9
2,5
5,5 5 5,15 6,1 8,6 11,1 5,7 5,18 5,35 6,3 8,8 11,3
0,4
6 5,45 5,65 6,7 9,2 11,7 6,3 5,73
-0,03
5,9
-0,03
7 10 13 6,5 5,91 6,1 7,2 10,2 13,2
7 (6,99) 6,35 6,6 7,7 10,7 13,7
0,5 3,5
8 7,28 7,6 8,7 11,7 14,7 8,4 7,65 7,9 9,1 12,6 16,1 9 8,2 8,5 9,7 13,2 16,7
10 9,1
-0,05
9,5
-0,05
10,7 14,2 17,7
0,6
0,2
4,5
Auswahl des richtigen O-Ring-Aussen- oder Innen-Ø für Zylinder- oder Stangenabdichtungen.
dd 2 1
D 1
Aussendichtend
O-Ring-Aussen-Ø D1 gleich oder bis zu 6% kleiner als Zylinder-Ø D
Innendichtend
O-Ring-Innen-Ø d1 gleich oder bis zu 2% größer als Stangen-Ø d
OR
INSIDE SEALINGe.g. chambered on one side withplastic Back-up ring.
OUTSIDE SEALINGe.g. chambered on both sideswith plastic Back-up rings.
6 ,3
p
s ta t.3 ,2d y n . 0 ,4
s ta t.3 ,2d yn . 1 ,6
L
C
R
1 5 °
Sta
ng
en
-Ød
H8
f 7
S
1
1
LR
6 ,3
pp
s ta t.3 ,2d y n . 0 ,4s ta t.3 ,2
d yn . 1 ,6
L
R 11 5 °
R
L
S
Zy
lind
er-
ØD
H8
f 7
C
2
HHEECCKKEERR®® GGSSMM®®OORR
PPRREECCIISSIIOONN OO--RRIINNGG((RROOUUNNDD SSEEAALL))
diam
of r
oddi
am o
fcy
linde
r
HYDRAULIC AND PNEUMATIC SYSTEMSSEALING: dynamic (axial movement)
Selection of the correkt O-ring outside or inside diameters for the sealing of cylinders o rods.
Outside sealing:Outside diam. of O-ring D1 equal or upto 6% smaller than cylinder diam. D
Inside sealing:Inside diam. of O-ring D1 equal or up to2% larger than rod diam. d
diam. of crosssection:
depth of groove S width of groovedynamic
hydraulic syst. pneumatic syst.
123
Abdichtung: rotierende Bewegung (für drucklose Flüssigkeiten)
Nuttiefe Nutbreite Querschnitts-
Ø d2 S Tol. L Tol. R R1 C 1 0,9 1,1
1,2 1,1 1,35 1,25 1,15 1,4 1,5 1,4 1,65 1,6 1,5 1,75
1,8 (1,78) 1,7 2
0,1 1,2
2 1,85 2,2 2,4 2,25 2,65 2,5 2,35 2,75
2,65 (2,62) 2,5 2,9
1,5
3 2,85
-0,02
3,3
0,1
3,15 3 3,45 3,5 (3,53) 3,3 3,85
0,2
2
4 3,8 4,4 4,5 4,3 5 0,3
5 4,75 5,5 5,3 (5,33) 5,05 5,8
2,5
5,5 5,25 6,1 5,7 5,4 6,3
0,4
6 5,7 6,6 6,3 6
-0,03
6,9 6,5 6,2 7,2
7 (6,99) 6,65 7,
0,5 3,5
8 7,6 8,8 8,4 8 9,3 9 8,55 9,9
10 9,5
-0,05
11
+0,1
0,6
0,2
4,5
OR
SEALING: ROTATING MOTION(FOR PRESSURELESS LIQUIDS)INSIDE SEALING
OUTSIDE SEALING
d1 ca. = 1,02d
1 ,6 0 ,4
6 ,3
We
llen
-Ød
S
L
R
C
15
°
1
R
dd
12
HHEECCKKEERR®® GGSSMM®®OORR
PPRREECCIISSIIOONN OO--RRIINNGG((RROOUUNNDD SSEEAALL))
diam. of cross section: depth of the groove: width of the groove:
diam
. of s
haft
124
Rechteck-Nut und Dreieck-Nut Abdichtung. Statisch
Rechteck-Nut Dreieck-Nut Nuttiefe Nutbreite Eckmass Querschnittts-
Ø d2 S Tol. L +0,2 E Tol. 1 0,8 1,3 1,4
1,2 0,95 1,55 1,6 1,25 1 1,6 1,7 1,5 1,2
-0,05
1,95 2 1,6 1,3 2,1 2,1
1,8 (1,78) 1,45 2,35 2,4 2 1,6 2,6 2,7
2,4 1,9 3,1 3,2 2,5 2 3,25 3,4
2,65 (2,62) 2,1 3,45 3,5 3 2,4 3,9 4
3,15 2,5 4,1 4,25 3,5 (3,53) 2,8 4,55 4,8
+0,1
4 3,2
+/-0,1
5,2 5,4 4,5 3,6 5,85 6,1 5 4 6,5 6,8
5,3 (5,33) 4,2 6,9 7,2 5,5 4,4 7,15 7,5 5,7 4,6 7,4 7,8 6 4,8 7,8 8,2
6,3 5,05 8,2 8,5 6,5 5,2 8,45 8,8
7 (6,99) 5,8 9,1 9,5 8 6,65 10,4 10,8
8,4 6,95 10,9 11,4 9 7,45 11,7 12,2 10 8,5
+/-0,15
12,5 13,6
+0,2
dd 1 2
D 1
OR
RECTANGULAR GROOVE AND TRIANGULAR GROOVESEALING: STATIC
RECTANGULARGROOVE
Outside diam. of O-ring Ø D1 equal or up to 1% largerthan outside Ø diam. of the groove.-Ring
Inside diam. of O-Ring-Ø d1 equal or up to 6% smallerthan inside diam. of the groove.
TRIANGULAR GROOVE
Inside diam. of O-Ring-Ø d1 equal orup to 6% smallerthan collar diameter.
p3 ,2
3 ,2
6 ,3
S
Nut-Aussen-Ø
L
p3 ,2
3 ,2
6 ,3
S
L
N u t- In n e n -Ø
s ta t.3 ,2
s ta t.3 ,2
6 ,3
S
L
C
1 5 °
R R
Sta
ngen
-Ød
H8
f
7
3 ,2
3 ,2
EB u n d -Ø
HHEECCKKEERR®® GGSSMM®®OORR
PPRREECCIISSIIOONN OO--RRIINNGG((RROOUUNNDD SSEEAALL))
diam. of cross section: depth of the groove: width of thegroove:
triangular grooveDimension of edge
outside diam. of thegroove
inside diam. of thegroove
diam
. of r
od
Diam. of collar
125
Trapeznut Abdichtung: statisch
Nuttiefe Nutbreite Querschnitts- Ø d2 S-0,05 L+0,1 R R1
3 2,4 2,65 0,5 0,15 3,5 (3,53) 2,8 3,05
4 3,2 3,4 4,5 3,65 3,75 5 4,15 4,1
5,3 (5,33) 4,4 4,35
0,25
5,5 4,5 4,6 5,7 4,8 4,7 6 5,05 4,95
6,3 5,35 5,15 6,5 5,5 5,3
0,8
7 5,95 5,65
0,4
8 6,85 6,5 8,4 7,25 6,8 9 7,8 7,25 10 8,7 7,55 12 10,3 9,4
1,5 0,5
OR
For installation reasons, werecommend calculation of theinside diameter of O-ring accor-ding to formula:
D1 = dm – 2 * d2
DETAIL “A”
A
m it t le r e r N u t - Ø d m
dd 2 1
D 1
3 ,2
6,3
3 ,2
L
S R
R 2 4 °
1
TRAPEZOIDAL GROOVESEALING: STATIC
HHEECCKKEERR®® GGSSMM®®OORR
PPRREECCIISSIIOONN OO--RRIINNGG((RROOUUNNDD SSEEAALL))
mean groove diameter
diam. of cross section:depth ofthe groove:
width of thegroove:
126
dd 1 2
d1 x d2 WZ-Nr.0,6 x 1,4 2-093060,7 x 1 2-065150,8 x 2 2-049130,85 x 0,5 2-084711 x 0,6 2-077381 x 1 2-098331 x 1,25 2-088021 x 2 2-077421,15 x 1 2-067351,2 x 0,6 2-114151,2 x 0,7 2-082991,2 x 1 2-044441,2 x 1,15 2-122841,2 x 1,25 2-080711,4 x 1 2-093071,45 x 2,4 2-061221,5 x 0,6 2-119441,5 x 0,75 2-083501,5 x 0,78 2-128801,5 x 0,85 2-083001,5 x 1 2-039381,5 x 1,05 2-088351,5 x 1,5 2-085411,78 x 1,78 2-058161,8 x 0,5 2-111141,8 x 0,6 2-115511,8 x 1 2-025731,9 x 1 2-087452 x 1 2-080722 x 1,5 2-067782 x 1,7 2-080742,04 x 1,78 2-087502,2 x 0,8 2-123692,2 x 1 2-024642,2 x 1,5 2-080732,2 x 1,6 2-067362,3 x 0,8 2-078222,3 x 0,85 2-083512,3 x 1,5 2-056272,3 x 1,6 2-056282,35 x 1 2-037552,4 x 1,9 2-067372,44 x 1,78 2-041832,5 x 0,65 2-059732,5 x 1 2-063192,5 x 1,2 2-087422,5 x 1,3 2-057752,5 x 2,4 2-094562,54 x 1,78 2-059692,6 x 1 2-090232,6 x 1,2 2-021262,6 x 1,9 2-008492,7 x 1,5 2-025702,8 x 0,6 2-119062,8 x 0,7 2-09946d1 x d2 WZ-Nr.2,8 x 1,1 2-080652,84 x 1,78 2-087432,9 x 0,85 2-066782,9 x 1,78 2-02355
3 x 1 2-027733 x 1,8 2-039753 x 2,7 2-021863 x 3,9 2-032843,2 x 1,8 2-017273,3 x 1 2-077083,3 x 2,4 2-054353,3 x 2,5 2-063283,4 x 1,3 2-080763,4 x 1,9 2-052543,5 x 0,9 2-088053,5 x 1,2 2-062563,5 x 1,5 2-024873,6 x 1,8 2-080753,6 x 2 2-055053,69 x 1,78 2-058953,7 x 0,5 2-122023,7 x 1,78 2-056703,8 x 1,5 2-056683,8 x 1,6 2-080773,8 x 2,2 2-114343,9 x 1,7 2-089633,9 x 1,78 2-057744 x 0,6 2-050844 x 1 2-032134 x 1,2 2-085604 x 1,5 2-019964 x 1,75 2-050854 x 2 2-050864 x 2,2 2-037404 x 2,5 2-050874 x 2,65 2-129714 x 3 2-053684,2 x 1,9 2-013134,3 x 2,4 2-048424,4 x 1,8 2-080804,48 x 1,78 2-037134,5 x 1 2-047734,5 x 1,5 2-016504,5 x 2,4 2-080794,6 x 1,8 2-087394,6 x 2 2-022974,7 x 3 2-087474,9 x 1,9 2-052555 x 1 2-018005 x 1,2 2-085455 x 1,25 2-045335 x 1,45 2-079275 x 1,5 2-025775 x 1,6 2-073145 x 1,75 2-02051d1 x d2 WZ-Nr.5 x 2 2-035515 x 2,5 2-026435 x 3 2-062525 x 3,5 2-019985 x 3 2-062525 x 5 2-073925,2 x 0,8 2-130015,28 x 1,78 2-05346
OR
IINNSSIIDDEE DDIIAAMMEETTEERRSSdd11 TTOOLLEERRAANNCCEE
over 2 up to 10 +/-0,13 +/-0,17over 10 up to 20 +/-0,18 +/-0,22over 20 up to 40 +/-0,23 +/-0,32over 40 up to 60 +/-0,39 +/-0,54over 60 up to 120 +/- 0,55 +/-0,97over 120 up to 150 +/-1,0 +/-1,2over 150 up to 200 +/-1,24 +/-1,55over 200 up to 250 +/- 1,59 +/-1,88over 250 up to 300 +/-1,93 +/-2,21over 300 up to 400 +/-2,25 +/-2,84over 400 up to 500 +/-2,91 +/-3,45over 500 up to 630 +/-3,54 +/-4,22over 630 up to 800 +/-4,38 +/-6,3
CCRROOSSSS SSEECCTTIIOONN DDIIAAMMEETTEERRSSdd22 TTOOLLEERRAANNCCEE
up to 1,78 +/-0,08over 1,78 up to 2,65 +/-0,09over 2,65 up to 3,55 +/-0,10over 3,55 up to 5,3 +/-0,13over 5,3 up to 7 +/-0,15over 7 up to 10 +/-0,18over 10 up to 20 +/-0,20
TTYYPPEE FFEEAATTUURREESS(displacement, burr, notch, flowmarks, pores etc.). In general wedeliver as per DIN 3771type featere “N”;type feature “S” can also be delive-red upon request.
Tool-no.:
127
5,3 x 0,4 2-097475,3 x 1,85 2-087385,3 x 2,2 2-076285,3 x 2,4 2-046645,4 x 1,45 2-082865,4 x 1,5 2-086845,5 x 1,03 2-119965,5 x 1,5 2-066035,5 x 1,8 2-087495,5 x 3 2-057985,6 x 2 2-094425,65 x 0,8 2-085285,7 x 0,6 2-063135,7 x 1,9 2-052565,8 x 1,6 2-087446 x 0,75 2-055816 x 1 2-044886 x 1,25 2-080786 x 1,48 2-077976 x 1,5 2-006286 x 1,8 2-039466 x 2 2-011616 x 2,3 2-054506 x 2,5 2-041936 x 3 2-041896 x 3,75 2-081426 x 4,8 2-080696 x 5,5 2-067796,07 x 1,78 2-049656,1 x 1,6 2-061026,1 x 1,7 2-018716,2 x 1 2-047456,2 x 1,8 2-087486,3 x 0,6 2-056376,3 x 1,6 2-017426,3 x 2,4 2-046656,35 x 1,587 2-063996,36 x 0,82 2-086296,4 x 1,9 2-052576,5 x 0,6 2-060696,5 x 0,8 2-076256,5 x 1,5 2-092776,5 x 1,6 2-053346,5 x 2,8 2-091586,5 x 3 2-051196,5 x 5,25 2-070366,6 x 1,5 2-02571d1 x d2 WZ-Nr.6,7 x 0,45 2-115556,75 x 1,78 2-044417 x 0,5 2-128437 x 0,8 2-076267 x 1 2-033547 x 1,5 2-006297 x 1,6 2-074657 x 1,8 2-039477 x 2 2-008657 x 2,5 2-037627 x 3 2-010907 x 5 2-044727,2 x 0,7 2-06703
d1 x d2WZ- Nr.
7,2 x 1,9 2-052587,3 x 2,4 2-032937,4 x 0,8 2-095737,5 x 1,5 2-057097,5 x 1,85 2-080817,5 x 2 2-044747,5 x 2,2 2-065167,5 x 2,5 2-085077,5 x 5 2-081817,6 x 1,78 2-017947,6 x 4 2-057647,8 x 1,78 2-130787,8 x 1,8 2-087467,9 x 1,6 2-037977,9 x 2,1 2-032867,9 x 2,3 2-033828 x 0,6 2-111138 x 0,7 2-115548 x 1 2-046168 x 1,3 2-093058 x 1,5 2-016178 x 1,6 2-022178 x 2 2-005808 x 2,325 2-040208 x 2,4 2-071688 x 2,5 2-050888 x 3 2-038978 x 3,75 2-034948 x 4 2-013908 x 10 2-01844
8,1 x 2 2-080828,13 x 1,78 2-097728,2 x 0,72 2-125708,2 x 2 2-004998,25 x 1,78 2-056718,3 x 2,4 2-045588,4 x 0,7 2-096468,4 x 2,2 2-049488,5 x 1 2-060968,5 x 1,5 2-068288,5 x 1,8 2-128498,5 x 2 2-044008,5 x 2,5 2-082288,5 x 3,5 2-045058,6 x 3 2-062618,73 x 1,78 2-066178,9 x 1,9 2-013148,9 x 2,7 2-052599 x 0,75 2-128169 x 1 2-070189 x 1,2 2-060689 x 1,5 2-034479 x 2 2-007959 x 2,25 2-015979 x 2,5 2-017089 x 2,7 2-076449 x 3 2-006319 x 3,5 2-032839 x 4 2-03550
9,1 x 1,6 2-08887
d1 x d2WZ- Nr.
9,1 x 7,95 2-123719,12 x 1,7 2-029449,12 x 3,53 2-130609,2 x 1,78 2-035659,2 x 2,65 2-035649,2 x 2,9 2-032889,2 x 3,5 2-064069,3 x 2,4 2-024209,5 x 0,9 2-123639,5 x 1,6 2-048719,5 x 1,8 2-004729,5 x 2,4 2-014769,5 x 2,5 2-051179,5 x 3 2-060749,5 x 6 2-075369,5 x 8 2-123369,6 x 0,8 2-114809,6 x 3,4 2-014569,6 x 3,6 2-060459,92 x 1,78 2-091109,92 x 2,62 2-0569310 x 0,5 2-1286610 x 0,6 2-0877110 x 1 2-0461710 x 1,3 2-0450610 x 1,5 2-0457010 x 2 2-0173110 x 2,2 2-0365410 x 2,5 2-0118410 x 3 2-0065210 x 3,2 2-0875410 x 4 2-0145310 x 8 2-09878
10,2 x 2,5 2-0459710,3 x 0,8 2-0741710,3 x 1,2 2-0864810,3 x 2,4 2-0464410,5 x 1,5 2-0455110,5 x 1,75 2-0480710,5 x 2 2-1317010,5 x 2,7 2-0131510,82 x 1,78 2-05843
11 x 0,5 2-0814311 x 1 2-0243811 x 1,5 2-0475211 x 2 2-0427311 x 2,5 2-0091311 x 3 2-0245711 x 4,5 2-0565111 x 5,5 2-0681111 x 6 2-04226
11,11 x 1,59 2-0605111,11 x 1,78 2-0610111,11 x 2,38 2-0651711,11 x 3,96 2-0640011,2 x 2,75 2-0022711,3 x 2,4 2-0213211,5 x 1 2-1148111,5 x 1,5 2-0625911,5 x 2,5 2-02539
Tool-no.: Tool-no.:
128
d1 x d2WZ- Nr.
11,5 x 3 2-0556111,5 x 4 2-0471811,6 x 1,2 2-0643311,91 x 2,62 2-06531
12 x 0,7 2-1289212 x 0,8 2-1243212 x 1 2-0457612 x 1,5 2-0368112 x 1,7 2-0376712 x 1,9 2-0431912 x 2 2-0138412 x 2,5 2-0332912 x 3 2-0063012 x 3,5 2-1277912 x 5 2-05116
12,3 x 1,9 2-0725612,3 x 2,4 2-0366412,4 x 2,65 2-0173612,42 x 1,78 2-0977112,5 x 1,8 2-0485812,5 x 2,1 2-0872212,5 x 2,75 2-0504613 x 0,7 2-1280513 x 1 2-0345413 x 1,3 2-0825213 x 1,5 2-0452613 x 1,6 2-0524013 x 2 2-0080213 x 2,5 2-0267613 x 3 2-0287813 x 3,5 2-0492113 x 4 2-0340913 x 4,5 2-0400413 x 8 2-03597
13,1 x 0,8 2-1147813,1 x 2,65 2-0661913,2 x 1,2 2-1147913,2 x 1,78 2-1132013,3 x 2,4 2-0213313,4 x 1,6 2-0773313,5 x 0,8 2-0741813,5 x 1,5 2-0827613,5 x 2,5 2-0395013,5 x 5 2-0482113,6 x 2,65 2-0443413,6 x 3 2-0334513,7 x 5,5 2-0666113,8 x 2,54 2-0294514 x 1 2-0550614 x 1,5 2-0247914 x 1,6 2-0448714 x 1,78 2-0413214 x 2 2-0182114 x 2,5 2-0163714 x 2,6 2-0326214 x 3 2-0089514 x 3,5 2-0554814 x 4 2-0282614 x 5 2-04920
14,2 x 2,8 2-01636
d1 x d2WZ- Nr.
14,28 x 1,59 2-0605214,4 x 1,6 2-1152414,55 x 0,99 2-0632914,6 x 2,3 2-0273214,9 x 0,7 2-1164315 x 1 2-0537115 x 1,5 2-0390115 x 2 2-0126615 x 2,4 2-0460515 x 2,5 2-0247815 x 2,75 2-0504715 x 3 2-0306615 x 3,2 2-0329815 x 3,5 2-0523915 x 4 2-0233115 x 5 2-0365215 x 5,5 2-0621015 x 6 2-0400515 x 7 2-0330715 x 10 2-03523
15,08 x 2,62 2-0656715,1 x 2,7 2-0526015,3 x 2,4 2-0173815,36 x 2,62 2-0672615,5 x 0,6 2-0268015,5 x 2,5 2-0429215,5 x 3 2-0545215,5 x 3,8 2-0096315,5 x 4,2 2-0854615,55 x 2,65 2-0427415,6 x 1,78 2-0787115,6 x 2,6 2-0441415,8 x 1,6 2-0772715,8 x 4,1 2-0382816 x 1 2-0243716 x 2 2-0060016 x 2,5 2-0161616 x 2,6 2-0733516 x 3 2-0086416 x 3,5 2-0374416 x 4 2-0102616 x 5 2-0510216 x 5,5 2-0442416 x 8 2-0114316 x 12 2-03997
16,2 x 2,5 2-0495116,3 x 0,8 2-0741916,3 x 2,4 2-0398016,4 x 1 2-0673916,4 x 2,6 2-0443816,5 x 1,25 2-0783816,5 x 1,5 2-0604216,55 x 2,15 2-0383516,8 x 1 2-0856416,8 x 2,2 2-0723816,9 x 2,7 2-0526117 x 0,6 2-0259317 x 1,5 2-0395117 x 2 2-0045417 x 2,5 2-01569
d1 x d2WZ- Nr.
17 x 3 2-0373917 x 4 2-0521217 x 4,5 2-0513417 x 5 2-0438317 x 8 2-07618
17,12 x 2,65 2-0427517,2 x 1,78 2-0629417,3 x 2,4 2-0213417,4 x 1,6 2-0359117,4 x 2,8 2-11912
17,462 x 2,381 2-0639817,5 x 2,4 2-0390017,5 x 2,65 2-0443517,5 x 3,5 2-0460617,5 x 4,2 2-0854718 x 1 2-0957618 x 1,15 2-0585518 x 1,3 2-0777918 x 1,5 2-0434918 x 2 2-0179618 x 2,2 2-0191718 x 2,5 2-0110018 x 2,75 2-0592918 x 3 2-0088518 x 3,15 2-0929318 x 3,5 2-0236418 x 4 2-0448518 x 5 2-0233018 x 7 2-0600618 x 8 2-0761818 x 8,5 2-0418618 x 10 2-0706718 x 12,5 2-04007
18,3 x 2,4 2-0362418,3 x 3,6 2-0526318,4 x 2,7 2-0526218,5 x 2,5 2-0421518,5 x 3,5 2-0450918,6 x 0,75 2-0520218,6 x 2,6 2-0273318,6 x 3,53 2-0565518,7 x 1,9 2-0264218,75 x 2,65 2-0356718,77 x 1,78 2-0688218,8 x 1,85 2-0808418,8 x 3,5 2-0605819 x 1,6 2-1264619 x 2 2-0566019 x 2,5 2-0191819 x 3 2-0089019 x 3,18 2-0170719 x 3,5 2-0138919 x 4 2-0513519 x 5 2-0928619 x 8 2-0972219 x 16 2-03124
19,04 x 2,38 2-0604819,2 x 1,65 2-0530319,2 x 1,8 2-0102519,2 x 3 2-03967
Tool-no.: Tool-no.: Tool-no.:
129
d1 x d2WZ- Nr.
19,3 x 2,4 2-0435819,5 x 1 2-0260219,6 x 0,6 2-0953819,6 x 2,8 2-0767219,6 x 3,53 2-0565519,8 x 2,9 2-0920319,8 x 3,6 2-0426720 x 1,3 2-0452720 x 1,4 2-0534920 x 1,5 2-0806620 x 2 2-0118320 x 2,5 2-0180920 x 3 2-0089620 x 3,3 2-0950620 x 3,5 2-0274720 x 4 2-0116220 x 5 2-0145120 x 6 2-0483820 x 6,5 2-0719020 x 7,5 2-0677420 x 10 2-03734
20,2 x 0,6 2-0298720,2 x 3,5 2-0254520,24 x 2,62 2-0639420,29 x 2,62 2-1130420,3 x 2 2-0317920,3 x 2,05 2-0900620,3 x 5,85 2-0366720,35 x 1,725 2-0413320,5 x 3 2-0259920,5 x 5,5 2-0412020,5 x 5,75 2-0375620,5 x 6,5 2-0224020,6 x 1,5 2-1152520,63 x 2,63 2-0667520,8 x 2,7 2-0512521 x 1 2-0328721 x 1,5 2-0321021 x 2 2-0565921 x 2,4 2-0372221 x 2,5 2-0089221 x 3 2-0367521 x 3,5 2-0394221 x 4 2-0903221 x 9,5 2-0386921 x 10 2-09285
21,2 x 3 2-0573321,3 x 3,6 2-0526421,5 x 2,75 2-0808521,5 x 3,5 2-0196321,8 x 3 2-0610021,8 x 3,53 2-0392421,8 x 5,33 2-0455321,89 x 2,65 2-06544
22 x 1 2-1234022 x 1,4 2-0480222 x 1,5 2-0427622 x 2 2-0251122 x 2,5 2-0093622 x 2,8 2-06710
d1 x d2WZ- Nr.
22 x 3 2-0134622 x 3,5 2-0157022 x 4 2-0164122 x 5 2-0328922 x 7 2-1181022 x 10 2-0354322 x 10,5 2-03524
22,2 x 3 2-0422322,3 x 2,4 2-0462722,5 x 2 2-0738422,5 x 2,6 2-0733622,5 x 4 2-0589723 x 1,5 2-0903623 x 2 2-0169123 x 2,2 2-0725723 x 2,5 2-0097223 x 2,9 2-0171023 x 3 2-0182223 x 3,25 2-0558023 x 3,5 2-0334223 x 3,6 2-0526523 x 3,75 2-0592823 x 4 2-0513723 x 5 2-0513623 x 6 2-04839
23,3 x 2,4 2-0723223,4 x 2,65 2-0499323,4 x 3,53 2-0433223,5 x 1,2 2-0814023,5 x 1,78 2-0570823,5 x 3 2-0580023,8 x 2,62 2-0666023,8 x 3,2 2-0694224 x 1 2-0806724 x 1,5 2-0339524 x 2 2-0095724 x 2,5 2-0534524 x 3 2-0092824 x 3,5 2-0269624 x 3,75 2-0665124 x 4 2-0304924 x 5 2-0371224 x 8 2-09721
24,2 x 3 2-0422424,5 x 1 2-1111224,5 x 3 2-1192824,6 x 3,6 2-0526625 x 0,8 2-0742225 x 1,5 2-0433825 x 2 2-0105025 x 2,5 2-0086625 x 2,65 2-0672725 x 3 2-0095825 x 3,5 2-0157125 x 3,53 2-0653425 x 4 2-0041725 x 5 2-0311525 x 6 2-0144925 x 8 2-0765025 x 8,5 2-09357
d1 x d2WZ- Nr.
25 x 10 2-0373325 x 12 2-04261
25,07 x 2,62 2-0667425,12 x 1,78 2-0451025,2 x 1,8 2-0452825,2 x 3 2-0366225,3 x 2,4 2-0691925,5 x 2,5 2-0725825,5 x 3,2 2-0693026 x 1 2-0609326 x 2 2-0256126 x 3 2-0093426 x 3,5 2-0394526 x 3,75 2-0446026 x 4 2-0392226 x 5 2-0350626 x 6 2-0579926 x 8 2-08356
26,2 x 3 2-0374226,2 x 3,6 2-0526726,5 x 1 2-1111126,58 x 3,53 2-0572926,64 x 2,65 2-0672826,7 x 1,78 2-0591627 x 1,5 2-0350227 x 2 2-0384027 x 2,5 2-0194127 x 3 2-0381327 x 3,2 2-0145927 x 3,5 2-0294027 x 4 2-0575227 x 4,5 2-0514127 x 5 2-0263127 x 5,5 2-0513927 x 9 2-04010
27,3 x 2,4 2-0362327,4 x 3,53 2-0443627,5 x 1 2-0246527,5 x 1,2 2-1111027,5 x 1,5 2-0596027,5 x 2 2-0482327,6 x 2,2 2-0307727,8 x 3,6 2-0526827,8 x 5 2-0376428 x 1 2-0613628 x 1,5 2-0433928 x 2 2-0135428 x 2,5 2-0146728 x 3 2-0089728 x 3,5 2-0157228 x 3,65 2-0512428 x 3,75 2-0665728 x 4 2-0219728 x 4,5 2-0917028 x 5 2-0345328 x 6 2-03299
28,1 x 0,8 2-0742328,15 x 3,53 2-0433128,2 x 1 2-0260128,2 x 3 2-06744
Tool-no.: Tool-no.: Tool-no.:
130
d1 x d2WZ- Nr.
28,24 x 2,62 2-1312928,3 x 1,8 2-0506428,5 x 1,8 2-0796428,5 x 3,5 2-0135628,5 x 10 2-0114428,7 x 2,95 2-0443928,8 x 2,7 2-0691728,9 x 1 2-0851429 x 2 2-0821229 x 2,5 2-0248829 x 3 2-0122729 x 3,5 2-02749
29,1 x 2,55 2-0655129,2 x 3 2-0372429,3 x 3,6 2-0526929,5 x 3 2-0585929,5 x 4,5 2-0304829,8 x 1 2-0268329,82 x 2,62 2-09522
30 x 2 2-0219630 x 2,55 2-0349830 x 3 2-0091030 x 3,5 2-0157330 x 4 2-0099430 x 4,5 2-0353830 x 5 2-0275230 x 6 2-0224130 x 7 2-0487930 x 8 2-0079130 x 10 2-03735
30,3 x 2,4 2-0362530,4 x 3,9 2-0647830,5 x 1,2 2-0826430,5 x 3,5 2-1308330,6 x 3,7 2-0549130,6 x 3,8 2-0611630,8 x 3,1 2-0444030,8 x 3,6 2-0527031 x 2 2-0363731 x 2,5 2-0401931 x 3,5 2-1308431 x 8 2-0628131 x 14 2-0420231 x 18,5 2-08283
31,1 x 3,5 2-0196231,35 x 3,53 2-0433031,4 x 2,7 2-0546631,42 x 2,62 2-0734031,47 x 1,78 2-1192631,5 x 1,78 2-0801531,5 x 2,5 2-1179831,5 x 3 2-0216931,5 x 3,65 2-0512131,5 x 4,5 2-0817531,8 x 1 2-0268131,8 x 2,65 2-0941332 x 1,5 2-0814832 x 2 2-0432332 x 2,5 2-0434032 x 3 2-02135
d1 x d2WZ- Nr.
32 x 3,5 2-0553132 x 3,75 2-0665832 x 4 2-0091132 x 5 2-0162132 x 8 2-0260732 x 10 2-04011
32,2 x 3 2-0201532,5 x 2,65 2-1193132,5 x 2,85 2-0268632,5 x 3,6 2-0527132,6 x 1,2 2-0810432,6 x 1,5 2-0886932,75 x 1,57 2-0612632,9 x 3,5 2-0441332,99 x 2,62 2-09770
33 x 1,8 2-0570733 x 2 2-0532533 x 2,5 2-0125233 x 3 2-0079233 x 3,5 2-0156533 x 4 2-0513833 x 5 2-0334633 x 5,5 2-1308533 x 6 2-03450
33,2 x 7,5 2-0706633,25 x 3,5 2-1308633,3 x 2,4 2-0462833,33 x 3,175 2-0640133,5 x 5 2-0616033,6 x 3 2-1265333,7 x 2,2 2-0211933,75 x 3,25 2-05370
34 x 1,5 2-0806834 x 2 2-0167534 x 2,5 2-0630134 x 3 2-0194234 x 3,75 2-0537234 x 4 2-0130134 x 5 2-0245134 x 5,5 2-0228634 x 12 2-03544
34,1 x 3,6 2-0527234,29 x 5,33 2-1308734,5 x 3,5 2-0398234,5 x 4 2-1181634,59 x 2,62 2-1308834,8 x 5 2-0399135 x 1,5 2-0630035 x 2 2-0219835 x 2,5 2-0073635 x 3 2-0092935 x 3,2 2-0146435 x 3,5 2-0156635 x 3,6 2-0671335 x 4 2-0213135 x 4,5 2-1108335 x 5,3 2-0240935 x 6 2-0998435 x 11 2-04304
35,2 x 1 2-11986
d1 x d2WZ- Nr.
35,2 x 1,78 2-0985335,5 x 8 2-0346535,5 x 16,5 2-0205935,6 x 1,5 2-1156235,6 x 3,6 2-0527335,8 x 1 2-0823936 x 1,2 2-0968536 x 2 2-0431736 x 2,5 2-0462436 x 3 2-0089836 x 3,5 2-0477536 x 4 2-0172536 x 5 2-0325436 x 7 2-0804636 x 10 2-04211
36,2 x 3 2-0366036,3 x 2,5 2-0402336,5 x 3,2 2-0170636,5 x 3,5 2-0213636,5 x 4,5 2-0472236,9 x 1,2 2-0742537 x 2 2-0241337 x 2,5 2-0480337 x 3 2-0233337 x 3,5 2-0739337 x 4 2-0778737 x 5 2-0800037 x 5,5 2-0197937 x 6 2-0115137 x 8 2-02425
37,2 x 3 2-1150437,3 x 3,6 2-0527437,5 x 1 2-1113037,5 x 3 2-0453437,5 x 4 2-0964437,5 x 5,33 2-0614137,75 x 4,125 2-0378037,77 x 2,62 2-1308937,82 x 1,78 2-11299
38 x 2 2-0567438 x 2,5 2-0738538 x 3 2-0182338 x 3,5 2-0210338 x 4 2-1309038 x 4,5 2-0186838 x 5 2-0368838 x 7 2-07651
38,1 x 1 2-0785938,1 x 3,2 2-0263938,5 x 3 2-0817939 x 2 2-0126539 x 2,2 2-0360639 x 2,5 2-0117739 x 3 2-0181639 x 3,5 2-0421439 x 4 2-0413139 x 6 2-0453639 x 8 2-0280339 x 10 2-00619
39,2 x 5,7 2-04264
Tool-no.: Tool-no.: Tool-no.:
131
d1 x d2WZ- Nr.
39,34 x 2,65 2-0688439,34 x 2,8 2-0954539,67 x 2,39 2-06049
40 x 1,5 2-0328540 x 1,7 2-0659440 x 2 2-0432440 x 2,5 2-0148840 x 3 2-0095940 x 3,5 2-0595940 x 4 2-0073840 x 5 2-0767940 x 5,5 2-1236840 x 8 2-0280540 x 10 2-04209
40,2 x 3,25 2-1176040,5 x 4 2-0465240,5 x 6 2-0591140,6 x 5,33 2-0614240,87 x 3,53 2-0689940,94 x 2,62 2-13130
41 x 1,5 2-0523741 x 2 2-0494641 x 3 2-0355741 x 4 2-0585841 x 5 2-0264141 x 7,5 2-0144141 x 9,5 2-0387041 x 10 2-0257441 x 12 2-09548
41,1 x 3,65 2-0512341,5 x 5,5 2-0193642 x 1 2-0455742 x 1,1 2-0769042 x 2 2-0402142 x 2,5 2-0445142 x 3 2-0220342 x 3,5 2-0228442 x 4,5 2-0200942 x 5 2-0165742 x 5,5 2-0514042 x 6 2-0817642 x 8 2-0718342 x 10 2-0178042 x 13 2-02426
42,2 x 3 2-0362242,5 x 3 2-1309142,52 x 2,65 2-06883
43 x 2 2-0243943 x 3 2-0139943 x 3,5 2-0394943 x 5 2-0248043 x 5,25 2-0665943 x 5,5 2-0191043 x 6 2-03477
43,4 x 3 2-0643543,5 x 3 2-0585743,5 x 5,25 2-0504843,5 x 9 2-0230443,8 x 5,33 2-1285144 x 1,78 2-06980
d1 x d2WZ- Nr.
44 x 2 2-0539844 x 2,5 2-0489444 x 3 2-0093044 x 3,5 2-0156744 x 4 2-0123344 x 4,5 2-0444244 x 5 2-0182444 x 5,25 2-0988044 x 6 2-0800144 x 8 2-0703444 x 9 2-00927
44,12 x 2,62 2-1304844,2 x 2,5 2-0188944,2 x 5,7 2-0213744,45 x 3,175 2-0640244,45 x 3,53 2-0692544,5 x 1,5 2-0418044,5 x 2 2-0163544,5 x 3,15 2-0170544,6 x 9 2-1218645 x 2 2-0602945 x 3 2-0229345 x 4 2-0398145 x 4,5 2-0674845 x 5 2-0275345 x 7 2-0253745 x 8 2-0993345 x 12 2-05051
45,5 x 1,5 2-0307645,5 x 5,5 2-0582445,69 x 2,66 2-1306245,7 x 2,62 2-1244246 x 2 2-0274146 x 2,5 2-0367446 x 3 2-0112746 x 3,5 2-0164846 x 4,5 2-0304046 x 5 2-03863
46,2 x 3 2-0573146,4 x 5,4 2-0363647 x 2 2-0521447 x 2,52 2-0254047 x 3 2-0348447 x 3,5 2-0524147 x 4 2-0164047 x 5 2-0507047 x 5,33 2-0580647 x 5,5 2-02353
47,2 x 5,7 2-0399047,5 x 1,5 2-0573847,5 x 10 2-0242747,6 x 2,6 2-0546447,63 x 3,53 2-06566
48 x 1 2-0732048 x 1,2 2-0742748 x 1,8 2-0853648 x 2 2-0476048 x 2,5 2-1140048 x 3 2-0154348 x 3,5 2-01684
d1 x d2WZ- Nr.
48 x 4 2-0187448 x 5 2-0193948 x 5,5 2-0586748 x 6 2-0248148 x 7 2-0706848 x 8 2-0749348 x 22 2-05393
48,5 x 3,5 2-1309248,9 x 2,65 2-0701449 x 1,5 2-0354849 x 2 2-0659549 x 2,5 2-0392549 x 3 2-0145849 x 3,6 2-0320349 x 9 2-0477749 x 15 2-09549
49,2 x 3 2-0563849,2 x 5,7 2-0366549,2 x 6,2 2-0349549,21 x 3,53 2-0661249,5 x 2,5 2-0455450 x 2 2-0145050 x 2,5 2-0470550 x 3 2-0086750 x 3,5 2-0482650 x 4 2-0204750 x 4,5 2-0304750 x 5 2-0033850 x 5,5 2-0181550 x 6 2-0082650 x 10 2-0533250 x 12 2-03732
50,2 x 3 2-0493650,2 x 5,33 2-0492350,4 x 3,53 2-0660950,47 x 2,65 2-0689850,5 x 7 2-0256051 x 2 2-0790651 x 2,5 2-0459551 x 3 2-0392851 x 4,5 2-0193751 x 9,5 2-03868
51,2 x 5,7 2-0713452 x 1,5 2-0790552 x 2,5 2-0632252 x 3,5 2-0167152 x 4 2-0476552 x 5 2-0209252 x 6 2-0788752 x 8 2-1206352 x 9 2-04638
52,07 x 2,62 2-1310252,2 x 5,7 2-0213852,5 x 4,5 2-0359552,5 x 5 2-0428852,7 x 0,85 2-0812953 x 1,5 2-0731353 x 2 2-0468453 x 2,5 2-0092553 x 3 2-03090
Tool-no.: Tool-no.: Tool-no.:
132
d1 x d2WZ- Nr.
53 x 4 2-0974053 x 5,25 2-0664953 x 7 2-0817753 x 10 2-11067
53,35 x 5,33 2-0441953,5 x 9 2-0230553,57 x 3,53 2-1306153,64 x 2,65 2-0695653,7 x 1,78 2-1313153,98 x 2,5 2-03782
54 x 3 2-0151854 x 3,5 2-0093154 x 4 2-0166354 x 5 2-0274454 x 5,5 2-0216154 x 6 2-0207354 x 8 2-12681
54,2 x 3 2-0365854,2 x 5,7 2-0213955 x 1,5 2-1271855 x 2 2-1312755 x 2,5 2-0579055 x 3 2-0140355 x 3,5 2-0524255 x 5 2-0311655 x 5,5 2-0769255 x 6 2-05425
55,2 x 3 2-0943755,25 x 2,62 2-0686555,56 x 3,53 2-06396
56 x 0,6 2-0759456 x 1 2-0953456 x 2 2-0520856 x 3 2-0156356 x 3,5 2-0395456 x 4 2-01664
56,2 x 3 2-0489556,5 x 5,33 2-0441656,7 x 1,2 2-0880356,82 x 2,62 2-13063
57 x 2 2-0382757 x 2,2 2-0956757 x 2,5 2-0360457 x 3 2-0174157 x 3,5 2-0127457 x 4 2-0194357 x 5 2-02093
57,2 x 3 2-1140557,5 x 10 2-0242858 x 2 2-0308958 x 2,5 2-0798958 x 3 2-0165358 x 3,5 2-0164758 x 4 2-0204858 x 5 2-05768
58,4 x 1,3 2-0327758,42 x 2,62 2-1310358,5 x 3,5 2-1310459 x 2,5 2-0694559 x 3 2-03526
d1 x d2WZ- Nr.
59 x 3,53 2-0453059 x 5 2-05856
59,2 x 5,7 2-0396259,4 x 2,8 2-0492459,7 x 5,33 2-0580259,99 x 2,62 2-13133
60 x 1,5 2-0970360 x 2 2-0739860 x 2,5 2-0418560 x 3 2-0329460 x 3,5 2-0093260 x 4 2-0160660 x 4,5 2-0968260 x 5 2-0033960 x 5,3 2-1313260 x 6 2-0438460 x 8 2-0414460 x 9 2-0387360 x 16 2-03545
60,3 x 3,175 2-0640360,3 x 4,8 2-0101461 x 2 2-0484961 x 3,2 2-0819361 x 5 2-1310561 x 6 2-0800261 x 10 2-11888
61,2 x 5,7 2-0974861,5 x 4 2-0504262 x 1 2-0984762 x 1,5 2-0782362 x 2 2-0659662 x 2,5 2-0536562 x 3 2-0092662 x 4 2-0065162 x 4,5 2-1310662 x 5 2-0178162 x 6,5 2-0200762 x 9 2-0218862 x 14 2-0188162 x 16,5 2-02054
62,2 x 5,7 2-0580562,4 x 5,3 2-0756562,5 x 10 2-0242962,9 x 5,33 2-0614363 x 2 2-0389463 x 3 2-0159663 x 3,5 2-0600263 x 4,5 2-0972663 x 5 2-0600363 x 5,5 2-0684263 x 6 2-1289863 x 7 2-0278363 x 10 2-04896
63,17 x 2,62 2-1304763,5 x 2 2-0384863,5 x 3,53 2-0453264 x 1,4 2-0700464 x 2,5 2-0948264 x 3 2-0127864 x 3,5 2-01059
d1 x d2WZ- Nr.
64 x 4 2-0461964 x 4,5 2-1309464 x 5 2-0269764 x 11 2-0230664 x 12,5 2-03265
64,2 x 5,7 2-0292764,9 x 2,6 2-0546564,9 x 3,55 2-0592165 x 2 2-0377465 x 2,5 2-0445065 x 3 2-0339665 x 3,5 2-0395365 x 4 2-0275465 x 4,5 2-0961265 x 4,6 2-1236065 x 5 2-0138765 x 5,7 2-0631665 x 6 2-0410365 x 6,5 2-0306865 x 7,5 2-03862
65,5 x 2,3 2-0785666 x 5 2-0414166 x 5,33 2-06144
66,27 x 3,53 2-1285466,34 x 2,62 2-1313466,5 x 3,5 2-0429167 x 2 2-0559067 x 2,5 2-0471467 x 3 2-0381567 x 4 2-0194467 x 6,5 2-0675567 x 7 2-0625167 x 8 2-05503
67,2 x 5,7 2-0366167,8 x 2,3 2-0785868 x 3 2-0521168 x 3,5 2-0564768 x 4 2-0135368 x 4,5 2-1175468 x 5 2-0476468 x 5,5 2-0173968 x 6 2-0763768 x 18 2-06776
68,7 x 5,3 2-0594969 x 2,5 2-1207869 x 3 2-0141069 x 4 2-0560069 x 5 2-0260069 x 5,5 2-1310769 x 7,5 2-05610
69,2 x 5,33 2-0614569,2 x 5,7 2-0214069,3 x 4 2-0677269,4 x 2,8 2-0607069,44 x 3,53 2-1311669,52 x 2,62 2-1310869,7 x 2 2-0910269,75 x 1,78 2-07789
70 x 1,4 2-0696670 x 2 2-02762
Tool-no.: Tool-no.: Tool-no.:
133
d1 x d2WZ- Nr.
70 x 3 2-0091470 x 3,5 2-0073470 x 4 2-0347070 x 4,5 2-0966470 x 5 2-0034070 x 5,5 2-0269870 x 7 2-1312670 x 8 2-06714
70,5 x 2,4 2-0794871 x 2 2-0522071 x 2,5 2-0365971 x 3 2-02390
71,1 x 2,65 2-0223771,5 x 1,5 2-0587671,5 x 1,7 2-0798871,5 x 2,5 2-0420871,5 x 3,5 2-1312572 x 2 2-0496172 x 3 2-0241472 x 3,5 2-0395572 x 4 2-0324972 x 5 2-0216573 x 2 2-0091573 x 2,5 2-0410573 x 3,5 2-0078973 x 7 2-08178
73,5 x 2 2-0335773,5 x 2,4 2-0518974 x 2 2-0547174 x 3 2-0194074 x 4 2-0545174 x 6 2-0366974 x 7 2-0481974 x 8 2-0372674 x 11 2-02307
74,2 x 5,7 2-0244375 x 2 2-0613775 x 2,5 2-0460075 x 3 2-0147575 x 3,5 2-0163475 x 4 2-0097175 x 4,5 2-0961375 x 5 2-0299875 x 5,5 2-0273775 x 7,5 2-02941
75,5 x 2,4 2-0794675,6 x 5,33 2-0441875,8 x 3,8 2-1153175,87 x 2,62 2-13135
76 x 2 2-0223376 x 2,5 2-0042976 x 3 2-0535176 x 3,5 2-0801476 x 3,75 2-1157976 x 4 2-0032076 x 7 2-0486376 x 8 2-07712
76,5 x 3 2-0467276,62 x 3,53 2-13109
77 x 2,5 2-01818
d1 x d2WZ- Nr.
77 x 5 2-0459877,2 x 5,7 2-0361177,5 x 5,2 2-0694378 x 1,2 2-0328278 x 2 2-0447978 x 2,5 2-1187578 x 3 2-0298378 x 4 2-0372878 x 5 2-0413978 x 5,5 2-0827878 x 6 2-0748578 x 7 2-0971478 x 15 2-03281
78,8 x 5,3 2-0200578,97 x 3,53 2-04992
79 x 1,5 2-1186279 x 2 2-0659779 x 2,5 2-0948179 x 3,65 2-0733779 x 6 2-05994
79,2 x 5,7 2-0304379,4 x 4,75 2-0263779,5 x 2,5 2-1130380 x 2 2-0223280 x 2,5 2-0359280 x 3 2-0134580 x 3,5 2-0393280 x 4 2-0073580 x 5 2-0034180 x 5,5 2-0185980 x 6 2-0251680 x 8 2-0314480 x 10 2-0976480 x 15 2-03817
80,8 x 2,3 2-0785781 x 3 2-0342181 x 5,5 2-1312481 x 7 2-01938
81,9 x 5,33 2-0441582 x 2,5 2-0801682 x 3,5 2-0459082 x 4 2-0240782 x 5,5 2-0538882 x 6 2-0575882 x 8 2-03300
82,22 x 2,62 2-1285282,27 x 1,78 2-1311082,5 x 3,65 2-0512282,6 x 1,6 2-0602783 x 3 2-0248283 x 5 2-0319684 x 2 2-0496284 x 3,5 2-0564884 x 4 2-0714484 x 5,33 2-0501084 x 5,7 2-0560184 x 11 2-02308
84,9 x 3,6 2-0592285 x 2 2-0276185 x 2,5 2-03657
d1 x d2WZ- Nr.
85 x 3 2-0187585 x 3,5 2-0135885 x 4 2-0266185 x 4,5 2-0588385 x 5 2-0540585 x 5,5 2-0186085 x 7 2-06784
85,1 x 5,33 2-0614885,32 x 3,53 2-1285685,5 x 2,4 2-0794485,5 x 2,5 2-0257586 x 3 2-0503686 x 3,7 2-1131186 x 4 2-0194586 x 6 2-0214186 x 8 2-0751887 x 2 2-0521387 x 4 2-0530087 x 5 2-08032
87,2 x 5,7 2-0188888 x 3 2-0212888 x 5 2-0080788 x 8 2-1312388 x 12 2-06132
88,3 x 5,33 2-0614988,5 x 3,53 2-0858389 x 4 2-0719989 x 5,5 2-05286
89,2 x 5,7 2-0214289,5 x 3,5 2-0429090 x 1 2-0708790 x 2 2-0325890 x 2,5 2-0597790 x 3 2-0302090 x 3,5 2-0551790 x 4 2-0093390 x 5 2-0338090 x 5,5 2-1312290 x 6 2-0379390 x 7 2-0930290 x 10 2-0416890 x 10,5 2-0261091 x 4 2-0347891 x 6 2-11563
91,44 x 5,33 2-1258692 x 3 2-0377892 x 3,5 2-0623692 x 4 2-0322992 x 5 2-02702
92,1 x 4,75 2-0280292,2 x 5,7 2-0789393 x 4 2-0573493 x 5 2-0710494 x 2 2-0659194 x 2,5 2-0389594 x 3 2-0062394 x 4 2-0753894 x 5 2-09005
94,2 x 5,7 2-0289794,5 x 3 2-11498
Tool-no.: Tool-no.: Tool-no.:
134
d1 x d2WZ- Nr.
94,6 x 3,5 2-1212794,6 x 5,33 2-0615195 x 3 2-0140695 x 3,5 2-0379195 x 4 2-0348195 x 4,5 2-0581195 x 5 2-0225795 x 5,5 2-0186195 x 7,5 2-0675495 x 8 2-02536
95,2 x 3,5 2-0379295,2 x 5,7 2-0797695,5 x 2,4 2-0794396 x 0,6 2-0759596 x 2 2-0778296 x 3 2-0141196 x 4 2-0032197 x 2,5 2-0659897 x 4 2-0323097 x 5 2-05992
97,8 x 5,33 2-0615298 x 1,5 2-0467398 x 3 2-0539698 x 3,5 2-1285398 x 4 2-0668898 x 5 2-0623798 x 6 2-0769398 x 7 2-04360
98,4 x 5,33 2-0658898,5 x 3,5 2-0738998,5 x 5,3 2-0725999 x 3 2-0331699 x 5 2-0183499 x 5,1 2-07688
99,2 x 5,7 2-04086100 x 1,5 2-08890100 x 2 2-05399100 x 2,5 2-04909100 x 3 2-02341100 x 3,5 2-04571100 x 3,65 2-07338100 x 4 2-02242100 x 5 2-01886100 x 5,5 2-01601100 x 6 2-04763100 x 7 2-11672100 x 10 2-01867100 x 15 2-02804101 x 5 2-09687101 x 5,33 2-04529101 x 6 2-02699
101,19 x 3,53 2-11305101,27 x 2,62 2-11070101,32 x 1,78 2-09746
102 x 1,5 2-08675102 x 2,5 2-12211102 x 3,5 2-05761102 x 4 2-00642102 x 5 2-13111102 x 7 2-12606
d1 x d2WZ- Nr.
102 x 8 2-03751103 x 4 2-09875103 x 5 2-02700103 x 6 2-03267104 x 2 2-11473104 x 3 2-07200
104,1 x 5,33 2-06153104,1 x 5,7 2-02444104,37 x 3,53 2-13112
105 x 2 2-05219105 x 3 2-01717105 x 3,5 2-02389105 x 4 2-03448105 x 5,2 2-08194105 x 5,5 2-11881105 x 6 2-09715105 x 6,4 2-02023105 x 8 2-06715105 x 15 2-02309
105,6 x 2,2 2-05094106 x 1 2-04897106 x 2 2-05243106 x 3 2-04910106 x 4 2-08706106 x 4,5 2-07341107 x 2 2-04898107 x 4,5 2-04704107 x 5 2-02143
107,2 x 5,2 2-12128107,3 x 3,53 2-07999107,3 x 5,33 2-06154108 x 3 2-03731108 x 4 2-05299108 x 5 2-02902108 x 5,2 2-07486108 x 6 2-01602108 x 8 2-04428
108,8 x 6 2-02721109 x 2 2-03109109 x 4 2-11854
109,2 x 5,7 2-03961110 x 1,5 2-11465110 x 3 2-04774110 x 3,5 2-04615110 x 4 2-01412110 x 5 2-01226110 x 5,5 2-09773110 x 6 2-04883110 x 9 2-11552
110,5 x 2,4 2-07947110,5 x 5 2-06946110,5 x 5,34 2-05407110,72 x 3,53 2-04333
112 x 2,5 2-06881112 x 3 2-05244112 x 3,5 2-05762112 x 4 2-03231112 x 5,3 2-07260112 x 6 2-07383113 x 1,5 2-07191
d1 x d2WZ- Nr.
113 x 3,5 2-01751113 x 4 2-03858113 x 6 2-02701113 x 11 2-05978
113,2 x 3,5 2-04769113,67 x 5,3 2-12857113,7 x 5,33 2-06156113,7 x 7 2-06166113,9 x 3,53 2-11352114 x 5,5 2-04344114 x 6 2-02296
114,5 x 3 2-11905114,6 x 2,2 2-03410115 x 2 2-08544115 x 3 2-05629115 x 3,5 2-05927115 x 4,5 2-02377115 x 5 2-03238115 x 6 2-12900115 x 9 2-09716115 x 12,5 2-03719116 x 2 2-02750116 x 3 2-05474116 x 4 2-00322
116,8 x 7 2-06167117 x 3,5 2-06880117 x 4 2-01740
117,07 x 3,53 2-12855117,5 x 5,33 2-06623118 x 3 2-05558118 x 4 2-02271118 x 4,5 2-05646118 x 5 2-02016
118,6 x 4 2-06432119 x 7 2-07243
119,2 x 5,7 2-03044119,5 x 3 2-13079120 x 2,5 2-01468120 x 3 2-03720120 x 3,5 2-02043120 x 4 2-03482120 x 4,5 2-01208120 x 5 2-03070120 x 6 2-05427120 x 7 2-05663120 x 10 2-02746120 x 15 2-05402
120,65 x 3,175 2-06404121 x 3 2-07239121 x 5 2-08985121 x 5,3 2-07261122 x 2 2-03426122 x 3 2-04231122 x 3,5 2-05622122 x 4 2-03232122 x 10 2-08879123 x 6 2-06235123 x 6,5 2-03721
123,2 x 7 2-06168123,4 x 3,5 2-07345
Tool-no.: Tool-no.: Tool-no.:
135
d1 x d2WZ- Nr.
123,8 x 4,76 2-04425124 x 3 2-02410124 x 3,25 2-08811
124,2 x 5,7 2-03610125 x 3 2-07065125 x 3,5 2-05518125 x 4 2-01231125 x 5 2-04613125 x 6 2-07145125 x 10 2-02519
125,2 x 6,9 2-06944126 x 4 2-03407
126,4 x 7 2-06169127 x 3,175 2-06405127 x 4 2-04160127 x 5,33 2-06624128 x 2,5 2-04761128 x 3 2-04548128 x 4,5 2-05541128 x 6 2-02914128 x 7 2-08196128 x 9 2-09443129 x 3,5 2-11768129 x 4 2-02249
129,2 x 5,7 2-04398129,5 x 7 2-06170130 x 2,5 2-04402130 x 3 2-05833130 x 4 2-01752130 x 4,5 2-04350130 x 5 2-05985130 x 6 2-03344130 x 7,5 2-03795131 x 5,3 2-07265131 x 9 2-11564132 x 2 2-05475132 x 3 2-04525132 x 3,55 2-12040132 x 4 2-02542132 x 6 2-04152
132,7 x 7 2-06189132,9 x 3,53 2-11428133 x 1,5 2-09100133 x 3,5 2-03317133 x 7 2-06538
133,4 x 5,34 2-05408133,5 x 3,25 2-08535133,5 x 4 2-09767133,6 x 2,2 2-03411134,5 x 7 2-06625135 x 2,5 2-02298135 x 3 2-07613135 x 3,5 2-03857135 x 3,8 2-07097135 x 5 2-02898135 x 6 2-07105135 x 7 2-08197136 x 3 2-03803136 x 3,5 2-03785136 x 4 2-00324
d1 x d2WZ- Nr.
136,5 x 5,33 2-06626137 x 2,3 2-07108137 x 3 2-08781137 x 4 2-00970137 x 7 2-03006138 x 2 2-06758138 x 3,5 2-03784138 x 5 2-07487138 x 6 2-01255138 x 8 2-05083
138,7 x 3 2-08463139 x 2,4 2-11530139 x 4 2-03480
139,1 x 7 2-06147139,2 x 5,7 2-07978139,3 x 3,53 2-06475139,7 x 5,33 2-06627140 x 1,9 2-09965140 x 3 2-02974140 x 4 2-03486140 x 4,5 2-11509140 x 5 2-04008140 x 10 2-02518142 x 4 2-01407142 x 7,5 2-03816142 x 9 2-04656
142,2 x 7 2-06191142,47 x 3,53 2-05815142,8 x 2,5 2-12389142,9 x 5,33 2-06628143 x 5 2-06663143 x 6 2-05792144 x 3 2-03787144 x 3,8 2-09988144 x 4 2-05582144 x 5 2-04446
144,2 x 5,7 2-09749145 x 2 2-08472145 x 2,5 2-05403145 x 3 2-07434145 x 3,5 2-05447145 x 4 2-01529145 x 5 2-01191
145,4 x 7 2-06192146 x 5 2-03918
146,1 x 5,33 2-06629147 x 3,5 2-06254148 x 2,7 2-09960148 x 10 2-09895
148,6 x 7 2-04911148,82 x 3,53 2-07213149,2 x 5,33 2-06630149,2 x 5,7 2-05572149,6 x 3 2-08896150 x 2 2-07163150 x 3 2-01760150 x 4 2-02581150 x 4,5 2-02254150 x 5 2-03117150 x 6 2-01732
d1 x d2WZ- Nr.
152 x 3,55 2-06560152 x 6,5 2-02692152 x 7 2-01275153 x 3,5 2-03233153 x 6 2-03923153 x 10 2-06022
154,2 x 5,7 2-07339155 x 2 2-06720155 x 3 2-04573155 x 4 2-05350155 x 5 2-07492
155,58 x 7 2-06631156 x 2 2-05477156 x 4 2-00325156 x 5 2-04953156 x 10 2-09894157 x 2,3 2-07854157 x 3 2-13113157 x 3,5 2-11767157 x 4 2-05793157 x 5 2-03896158 x 6 2-03234
158,1 x 7 2-05632158,34 x 3,53 2-06533159,2 x 5,7 2-04498159,5 x 3 2-13080159,5 x 7 2-06632160 x 3 2-02256160 x 4 2-02662160 x 5 2-04354160 x 10 2-01196
161,9 x 6,99 2-06397162 x 2 2-11466162 x 2,3 2-07109162 x 3 2-08043162 x 4 2-03235
163,6 x 2,2 2-03412164,5 x 7 2-06194164,7 x 3,53 2-05939165 x 2 2-02984165 x 2,4 2-06008165 x 3 2-05194165 x 4 2-01835165 x 5 2-04159165 x 5,5 2-04210166 x 6 2-04776
166,7 x 7 2-06633167 x 4 2-00969167 x 5 2-03709
167,6 x 3,53 2-08585168 x 3 2-05887168 x 4 2-00597
168,5 x 5,5 2-07855170 x 3 2-03794170 x 3,5 2-05448170 x 4 2-03386170 x 5 2-12716170 x 8 2-09947
170,8 x 7 2-06195170,82 x 5,33 2-12802
Tool-no.: Tool-no.: Tool-no.:
136
d1 x d2WZ- Nr.
171 x 3,53 2-05940172 x 2,3 2-07852172 x 4 2-02633172 x 6 2-02731173 x 2,1 2-05751173 x 3 2-07086173 x 4 2-03320173 x 5 2-07382174 x 3 2-04537
174,3 x 3,5 2-01253174,6 x 7 2-06634175 x 4 2-11853175 x 5 2-05634175 x 5,7 2-11186175 x 6 2-04614175 x 7 2-06843177 x 3 2-11650177 x 4 2-01610
177,2 x 7 2-06196178 x 3,5 2-13114178 x 6 2-07212178 x 6,5 2-07843178 x 10 2-04739179 x 3 2-04363180 x 2 2-12203180 x 3 2-02975180 x 4 2-03487180 x 5 2-00526180 x 8 2-05092180 x 14 2-09962181 x 2,3 2-07851181 x 7 2-03110182 x 7 2-06021
182,6 x 5,5 2-01522183 x 2 2-07846183 x 7 2-01276183 x 10 2-09912184 x 3 2-03910184 x 5 2-04847184 x 8 2-03710185 x 2 2-09992185 x 2,6 2-04983185 x 3 2-02199185 x 3,55 2-12039185 x 4,5 2-03387185 x 6 2-11409186 x 7 2-03916187 x 4 2-05727
187,3 x 7 2-06635188 x 2 2-04738188 x 5 2-03539188 x 6 2-09979188 x 7 2-05290
189,2 x 5,7 2-07977189,9 x 7 2-06198190 x 3 2-13115190 x 3,53 2-07388190 x 5 2-03715190 x 6 2-03812190 x 8,5 2-07088
d1 x d2WZ- Nr.
192 x 2 2-04550192 x 4 2-04165192 x 18 2-03818193 x 2 2-04645193 x 7 2-11487195 x 3 2-03909195 x 10 2-05078
195,6 x 4,4 2-05980196 x 4 2-00599
196,2 x 7 2-06199197 x 8 2-12786198 x 5 2-05104198 x 6 2-02794200 x 2,6 2-06971200 x 3 2-07245200 x 4 2-03714200 x 5 2-05103200 x 5,3 2-09981200 x 6 2-04612200 x 6 2-04612
200,5 x 2,4 2-07949201,5 x 3,53 2-09380202 x 4 2-01611202 x 6 2-06043
202,6 x 7 2-05633202,8 x 3,53 2-13139203 x 3 2-05526205 x 2 2-05460205 x 3 2-03552205 x 4 2-06274205 x 5 2-04703206 x 7 2-05797208 x 4 2-03488208 x 6 2-06389208 x 8 2-07494209 x 7 2-07263
209,14 x 3,53 2-11506209,2 x 5,7 2-04087210 x 3 2-02200210 x 4 2-03814210 x 5 2-03656210 x 6 2-03208210 x 6,3 2-11189210 x 10 2-01528210 x 12 2-02982
210,5 x 2,4 2-07945212 x 5 2-04982214 x 6 2-07502215 x 5 2-04497215 x 8 2-03037
215,3 x 7 2-06215215,5 x 3,53 2-08584216 x 1,5 2-03811216 x 2 2-09705216 x 2,3 2-07110216 x 3 2-03825216 x 4 2-01408217 x 5,33 2-13019218 x 5 2-12616218 x 6,15 2-07381
d1 x d2WZ- Nr.
218,5 x 4,5 2-05831220 x 2 2-06759220 x 3 2-07460220 x 5 2-06138
221,6 x 7 2-06636221,62 x 5,33 2-12990
222 x 4 2-03491222 x 6,3 2-09570222 x 10 2-04964223 x 3,3 2-07916224 x 3,8 2-06932225 x 3 2-05534225 x 5 2-03810225 x 8 2-02627226 x 3,6 2-07806226 x 4 2-05896227 x 3,5 2-11860228 x 3 2-09460228 x 3 2-09460228 x 4 2-03705228 x 6 2-02486228 x 7 2-06216228 x 10 2-06384230 x 2 2-09993230 x 5 2-01761230 x 6 2-02729233 x 3 2-05832234 x 2,5 2-07394
234,54 x 3,53 2-11108235 x 4 2-03655235 x 5 2-02618235 x 6 2-07106236 x 5,3 2-09982236 x 10 2-11008238 x 3,7 2-04574238 x 4 2-02405238 x 5 2-06497238 x 5,33 2-13018
239,3 x 5,7 2-09904239,5 x 8 2-06819240 x 2 2-11528240 x 2,5 2-05295240 x 3 2-02201240 x 5 2-03872
240,67 x 5,33 2-11202240,7 x 7 2-06217242 x 4 2-06425242 x 6 2-07699242 x 15 2-05469243 x 8,5 2-05640244 x 3 2-06826244 x 7 2-07488
244,5 x 3,5 2-09418245 x 5 2-02579246 x 8 2-12785248 x 5 2-06724250 x 1,5 2-11527250 x 3 2-03809250 x 4 2-04986250 x 5 2-05079
Tool-no.: Tool-no.: Tool-no.:
137
d1 x d2WZ- Nr.
250 x 6 2-07623250 x 7 2-02730251 x 8 2-03711252 x 4 2-01612253 x 6 2-07489253 x 7 2-06469
253,37 x 5,33 2-11852253,4 x 7 2-06218253,59 x 3,53 2-11109
254 x 4 2-05726255 x 5 2-07454
255,6 x 2,2 2-03540256 x 4 2-01409258 x 6 2-05035258 x 7 2-05080
259,7 x 7 2-06637260 x 3 2-07236260 x 4 2-04985260 x 5 2-08195262 x 4 2-04118262 x 13 2-06837265 x 5 2-03531265 x 6 2-07107265 x 10 2-01279
266,1 x 7 2-06219266,29 x 3,53 2-11855
267 x 4 2-06426270 x 3 2-07853270 x 4 2-08562270 x 5 2-08303272 x 4 2-09936
272,4 x 7 2-06638275 x 4 2-02202275 x 5 2-03522
278,8 x 7 2-06220278,99 x 3,53 2-12162
280 x 4 2-03388280 x 5 2-03716280 x 6 2-03549280 x 8 2-05819280 x 8,2 2-12609282 x 4 2-03490
285,1 x 7 2-06639289 x 3,5 2-02758290 x 2 2-11644290 x 3 2-03718290 x 5 2-11339290 x 6 2-02369290 x 8 2-07535
291,5 x 7 2-06221292 x 4 2-12012295 x 6 2-02756297 x 4 2-06385
297,8 x 7 2-06640299,3 x 5,7 2-09905300 x 8 2-09900302 x 4 2-11286302 x 5 2-02895303 x 3 2-04452
304,17 x 5,33 2-12686
d1 x d2WZ- Nr.
304,2 x 7 2-06222304,39 x 3,53 2-06810
305 x 4 2-07517305 x 5 2-03045305 x 8 2-09370310 x 4 2-13120310 x 5 2-05081310 x 6 2-09112312 x 4 2-03492315 x 4 2-08565
316,2 x 7 2-06441316,9 x 7 2-06223320 x 5 2-03717325 x 8 2-05694
329,6 x 7 2-06224330 x 5 2-03729330 x 6 2-04167330 x 8 2-03617336 x 2 2-12497340 x 4 2-08198340 x 5 2-08563
342,3 x 7 2-06225343 x 6 2-03614343 x 7 2-06468345 x 4 2-12680345 x 5 2-02276345 x 8 2-08566348 x 8 2-08302350 x 5,5 2-04808353 x 8,3 2-07490355 x 4 2-07234355 x 7 2-06226355 x 8 2-09901360 x 4 2-01164360 x 5 2-11340365 x 8 2-12491365 x 10 2-09980367 x 3,5 2-03535
367,7 x 7 2-06227368 x 6 2-02793370 x 3 2-01452370 x 4 2-03752370 x 5,5 2-03985372 x 6,3 2-09937374 x 5 2-09101375 x 3 2-11150380 x 5 2-05630
380,4 x 7 2-06228382 x 4 2-11151382 x 14 2-11126383 x 6,3 2-09935
383,5 x 3,5 2-09419390 x 4 2-07235390 x 11 2-03753
393,1 x 7 2-06229395 x 2,4 2-11553395 x 5 2-04757400 x 4 2-05249400 x 5 2-03413408 x 5 2-02255
d1 x d2WZ- Nr.
410 x 4 2-13093414 x 16 2-06820418 x 7 2-09863420 x 4 2-01613420 x 5 2-11246426 x 7 2-05698430 x 7 2-06519430 x 11 2-08927438 x 15,2 2-09758
439,5 x 5 2-13081440 x 4 2-12042444 x 11 2-05699445 x 5 2-05539455 x 5 2-08543460 x 4 2-01614465 x 5 2-05502469 x 11 2-05700470 x 10 2-09783474 x 16 2-06821475 x 8 2-05817480 x 4 2-08199489 x 11 2-05701490 x 5 2-01530501 x 14 2-07835510 x 6 2-12635516 x 15 2-09600530 x 5 2-01521538 x 6 2-03615550 x 4 2-11281
559,1 x 6,35 2-01168570 x 4 2-08886590 x 4 2-09022
598,82 x 3,53 2-09827600 x 6 2-05118610 x 7 2-05795629 x 11 2-05702630 x 14 2-07924643 x 5 2-09902673 x 7 2-13006676 x 8 2-09784680 x 14 2-08382690 x 7 2-05794695 x 6 2-06378700 x 8 2-12492709 x 5 2-11475710 x 6 2-11398715 x 6 2-11801720 x 6 2-09939740 x 6 2-09430745 x 3,2 2-11284785 x 8 2-05818790 x 5 2-09903
840,8 x 2,62 2-12346854 x 7 2-13007870 x 8 2-09917882 x 3 2-09873886 x 4 2-09872908 x 1,78 2-08070910 x 8 2-09918
Tool-no.: Tool-no.: Tool-no.:
138
HHEECCKKEERR®® GGSSMM®®
SSTTAARR RRIINNGG SSRR11RROODD,, SSHHAAFFTT AANNDD
CCYYLLIINNDDEERR SSEEAALLSR
SEAL PROPERTIES• circular profile with 12 sealing edges• special shapes upon request• O-ring grooves• low friction and breakaway forces
APPLICATION• measuring and control systems• hydraulic and pneumatic systems• rotary and pivoting pistons• low pressures
MATERIALS• selection according to the respective operatingconditions• materials as per material list
INSTALLATION• installation dimensions according to the list ofdimensions• to be latched into the provided area• installation auxiliary to be provided• sharp edges to be avoided
rounded edges insertion chamfer
insertion chamfer rounded edges
139
Abdichtung: dynamisch axiale und rotierende Bewegung
axiale Bewegung rotierende Bewegung Quer-schnitt-
Ø d2 S Tol. L+0,2 S Tol. L+0,2 R C
2 1,8 2,3 1,9 2,3 2,4 2,15 2,8 2,28 2,8 2,5 2,25 2,9 2,38 2,9
2,65 (2,62) 2,35 3 2,5 3
1,5
3 2,7
-0,02
3,4 2,85 3,4 3,15 2,85 3,6 3
-0,02
3,6 3,5 (3,53) 3,2 4 3,3 4
0,2
2
4 3,65 4,5 3,8 4,5 4,5 4,1 5 4,3 5 0,3
5 4,55 5,5 4,75 5,5 5,3 (5,33) 4,9 5,9 5,05 5,9
2,5
5,5 5,05 6,1 5,2 6,1 5,7 5,2 6,3 5,4 6,3
0,4
6 5,5 6,7 5,7 6,7 6,3 5,75
-0,03
7 6 7 6,5 5,95 7,2 6,15
-0,03
7,2 7 (6,99) 6,4 7,7 6,65 7,7
0,5 3,5
8 7,3 8,6 7,6 8,6 8,4 7,7 9 8 9 9 8,25 9,6 8,55 9,6 10 9,2
-0,05
10,7 9,5
-0,05
10,7
0,6 4,5
Auswahl des richtigen Starring-Aussen- oder Innen-Ø für Zylinder, Wellen und Stangenabdichtung.
dd
D
1
1
2
SR
Selection of the correct outside or inside diameter of the star ringfor the sealing of cylinders, shafts and rods.
SEALING: DYNAMICAXIAL AND ROTATING MOTIONSINSIDE SEALING
OUTSIDE SEALING
1 ,6
0 ,4
6 ,3
Sta
ng
en
-Ø 15
°
C
L
R
S
0 ,4
1 ,6
6 ,3
Zy
lind
er-
Ø
15
°
R
S
L
C
HHEECCKKEERR®® GGSSMM®®
SSTTAARR RRIINNGG SSRR11RROODD,, SSHHAAFFTT AANNDD
CCYYLLIINNDDEERR SSEEAALL
Cross sectiondiameter
axial motion rotating motion
Outside sealingStar ring outside diam. D1 equal or up to3% smaller than cylinder diameter D
Inside sealing:Star ring inside diam. d1 equal to rod dia-meter d.
140
dd 12
Abmaße für Innen-Ø
d1 Toleranz über 2 bis 10 +/-0,13 - +/-0,17 über 10 bis 20 +/-0,18 - +/-0,22 über 20 bis 40 +/-0,23 - +/-0,32 über 40 bis 60 +/-0,39 - +/-0,54 über 60 bis 120 +/-0,55 - +/-0,97 über 120 bis 150 +/-1,0 - +/-1,2 über 150 bis 200 +/-1,24 - +/-1,55 über 200 bis 250 +/-1,59 - +/-1,88 über 250 bis 300 +/-1,93 - +/-2,21 über 300 bis 400 +/-2,25 - +/-2,84 über 400 bis 500 +/-2,91 - +/-3,45 über 500 bis 630 +/-3,54 - +/-4,22 über 630 bis 800 +/-4,38 - +/-6,3
Abmaße für Querschnitts-Ø d2 Toleranz
bis 1,78 +/-0,08 über 1,78 bis 2,65 +/-0,09 über 2,65 bis 3,55 +/-0,10 über 3,55 bis 5,3 +/-0,13 über 5,3 bis 7 +/-0,15 über 7 bis 10 +/-0,18 über 10 bis 20 +/-0,20
d1 x d2
2,4 x 2 2-078923,5 x 3 2-078705 x 2 2-082757 x 3 2-072758 x 2,5 2-075299 x 2,5 2-0770010 x 2,62 2-0825511 x 3 2-0731512 x 3 2-0727712 x 3,3 2-0744713 x 3 2-0747514 x 2,5 2-0760814 x 3 2-0734215 x 2,5 2-0778015 x 3 2-0727816 x 2,65 2-0851516 x 2,83 2-0914718 x 2,5 2-0812718 x 3 2-0728019 x 2,5 2-0808720 x 3 2-0728120 x 5 2-07282
20,5 x 2,5 2-0751422 x 3 2-0734324 x 3 2-0728325 x 3,5 2-0744625 x 3,7 2-0766825 x 4 2-0759926 x 6 2-0753228 x 3,5 2-1153630 x 3 2-0744332 x 4 2-0728733 x 2,5 2-0893933 x 4 2-0734434 x 4 2-0734835 x 4 2-0728836 x 3 2-0728938 x 3 2-0853740 x 3 2-0729140 x 4 2-0791943 x 3 2-0795344 x 2,9 2-0894045 x 4 2-0877046 x 3 2-08262
47,5 x 3 2-1138448 x 4 2-0777452 x 3,5 2-1193854 x 2 2-0775055 x 4 2-0729356 x 3,5 2-1193958 x 4 2-0753060 x 6 2-0729462 x 3 2-0729564 x 5 2-0741068 x 4 2-0729768 x 6 2-0764070 x 5,5 2-0780072 x 4 2-07298
74,2 x 5,7 2-0804475 x 4 2-07725
NennmasseWZ-Nr.
d1 x d2
78,3 x 2,62 2-0970780 x 3 2-0729980 x 5 2-0730080 x 6 2-0730183 x 3 2-1112084 x 3 2-0977588 x 3 2-0942090 x 3 2-0751590 x 5 2-0730391 x 5 2-0731697 x 3,5 2-11937100 x 5 2-07516103 x 3 2-11265107 x 3 2-11483107 x 3,5 2-11935110 x 3,5 2-11936110 x 4 2-07512116 x 3,5 2-11933117 x 4 2-11383118 x 6 2-07304122 x 4 2-07513127 x 3,5 2-11934
128,5 x 3,5 2-09709130 x 4 2-11382160 x 7 2-07837170 x 5 2-08267171 x 5 2-09708210 x 5 2-08268220 x 5 2-08265230 x 5 2-08266250 x 5 2-08858252 x 5 2-07579256 x 5 2-07580260 x 5 2-08269270 x 5 2-08753280 x 5 2-08270
NennmasseWZ-Nr.
SR
Tool-no.: Tool-no.:
IINNSSIIDDEE DDIIAAMMEETTEERRSSdd11 TTOOLLEERRAANNCCEE
over 2 up to 10 +/-0,13 +/-0,17over 10 up to 20 +/-0,18 +/-0,22over 20 up to 40 +/-0,23 +/-0,32over 40 up to 60 +/-0,39 +/-0,54over 60 up to 120 +/- 0,55 +/-0,97over 120 up to 150 +/-1,0 +/-1,2over 150 up to 200 +/-1,24 +/-1,55over 200 up to 250 +/- 1,59 +/-1,88over 250 up to 300 +/-1,93 +/-2,21over 300 up to 400 +/-2,25 +/-2,84over 400 up to 500 +/-2,91 +/-3,45over 500 up to 630 +/-3,54 +/-4,22over 630 up to 800 +/-4,38 +/-6,3
CCRROOSSSS SSEECCTTIIOONN DDIIAAMMEETTEERRSSdd22 TTOOLLEERRAANNCCEE
up to 1,78 +/-0,08over 1,78 up to 2,65 +/-0,09over 2,65 up to 3,55 +/-0,10over 3,55 up to 5,3 +/-0,13over 5,3 up to 7 +/-0,15over 7 up to 10 +/-0,18over 10 up to 20 +/-0,20
141
RE
RE-rings are so versatile usable (e.g. flat-seals, buffers, shaft-seals) that particularareas of use cannot be established.
The application of these form-pressed orform-poured parts is meaningful howeveronly there, where the low precision and exactdimensioning of stamped or slaughteredrings is not enough.
MMAATTEERRIIAALLSSRE-rings can be delivered in all our materi-als.
TTYYPPEESS OOFF TTOOOOLLSS• tools for rubber materials• tools for fabric materials• tools for polyurethan materials
The delivery-possibility of the RE-rings forthe three material-groups is shown in the fol-lowing dimension table (column: tool-no.). Inthis dimension table, only the profile RE1 ispresented. With demand for the profiles RE2and RE9, we ask you to turn to our technicaladvice.
SEAL PROPERTIESThe name .RE" is the collective-name for all cir-cular articles, that show a quadratic or rectangu-lar cross-section-profile.
EXAMPLES RE1
EXAMPLES RE2
EXAMPLES RE9
di
Da
H
HHEECCKKEERR®® GGSSMM®®
RREERREECCTTAANNGGUULLAARR RRIINNGGSS
142
di Da H Gummi GewebePolyure-
than0,75 2,15 1,5 2-074401,4 2,7 0,76 2-077541,6 3,2 0,6 2-096171,7 3,2 5 2-081161,8 2,8 2 2-130402 6 6 V-12692 8 4 2-090452 8 8 V-28432 9,5 7 V-3808
2,5 6 2 2-120642,5 6 3 2-120652,5 6,3 50 V-29212,5 11,5 6 V-38072,5 11,5 8 V-40882,6 8,5 5,5 V-25833 4,8 2,5 2-088213 7 3 2-091863 18 50 V-26793 20 4 2-05177
3,6 6,8 4 V-28743,6 10 5,5 V-18643,7 12,5 12,5 2-047553,8 10 3 2-025334 6 2,5 2-088224 7 2 2-092884 7 9 2-092254 7 15 V-31814 7,5 20 V-38654 8 15 V-31824 8,5 3,7 2-054804 8,5 20 V-38664 9 1,5 2-046534 9 15 V-31834 10 15 V-32414 12 105 V-25844 13 4 2-093314 14 4 V-4854 15 4 2-128974 19,5 1,5 2-091924 25 16 V-35294 33 2 2-09843
4,1 11 3 2-129994,1 13,5 4 2-127624,25 10 6,5 2-072684,5 8 2 2-066944,5 8 9 2-122914,5 8 9 V-19474,5 18 5 2-022454,5 48,6 3 2-079004,6 14,2 3 2-085504,6 18,7 3 2-069774,6 21,7 3 2-069784,6 24 3 2-088604,6 26,7 3 2-069794,6 30 3 2-088614,8 13,1 3 2-054934,8 25,4 4 2-013954,9 8 2,7 2-128895 9 1 2-083135 9,5 80 V-4125
Werkzeug-Nr.Nennmasse
EXAMPLES RE1
In the dimension table, only the rings producedfrom presses or poured tools are contained.Parts manufactured as tubes can be stung onthe wished height H.
RE
di
DaH
Tool-no.:dimension table
rubber fabric
143
di Da H Gummi GewebePolyure-
than7 18 40 V-05817 20,8 6 2-013757 22 4 2-005497 33 2 2-114177 60 2,5 2-11424
7,05 17 4 2-124707,2 20 12 2-122417,5 12 2,5 2-061727,5 12 3,7 2-061237,5 13 1 2-071287,8 20 12,5 2-125668 10 2,5 2-039218 10 2,5 2-088248 11 80 V-32168 12 3 2-121218 12,6 4,5 2-114708 15 2 2-051068 15,8 12 2-113288 16 3 2-000528 16 12 2-113268 16 15 2-115618 16 23 2-074378 16 75 V-29858 16,5 7 2-036188 17 12 2-113278 18 1,5 2-019128 18 200 V-19548 19 12 2-113298 20 250 V-26218 20,2 12 2-113308 21 12 2-074368 22 150 V-35678 23,4 12 2-113318 26 12 2-113328 31 15 2-052898 35 300 V-0557
8,5 18 12 2-038609 12,6 3 2-078829 15 9 2-115949 16 7,5 2-059849 19 7 2-039659 21 3 2-031609 27 200 V-09929 30 300 V-556
9,5 15 40 V-41569,5 16,5 5 2-027249,5 18,6 12,2 2-089769,5 19,1 50 V-36679,5 20 9 2-130009,5 22 4 2-121049,5 22 120 V-34779,5 26,5 120 V-27229,7 14 1 2-061289,7 17,2 3 V-28569,8 15,7 3 2-052229,8 16 2 2-029589,8 20 3 2-0683910 15 100 V-350610 15,5 5,5 2-0985710 16 3 2-00022
Nennmasse Werkzeug-Nr.
di Da H Gummi GewebePolyure-
than5 10 7 2-122595 10 8 2-018435 10,5 2 2-046075 11 11 V-19035 13 8 V-12275 14 2 2-069685 16,5 5,5 2-064925 17,7 120 V-27295 20 4 2-005505 22 5 2-033415 28 9,5 2-031335 60 2,5 2-09834
5,2 15 9 2-126495,2 15 12 2-122745,2 20 12 2-122405,4 12 100 V-41615,5 10 3,7 2-054795,5 10,7 6,5 2-078315,6 6,6 1,2 2-122755,6 7,6 2,5 2-088235,75 13 3 2-066025,8 13 3 2-060555,8 13,1 3 2-075075,8 13,15 3 2-072225,8 13,35 3 2-075395,9 10 2 2-029486 8 2,5 2-040846 9,5 20 V-38676 10 20 V-37226 10,5 2 2-096246 10,5 20 V-38686 11 20 V-37236 11,5 70 V-38696 12 20 V-37246 15,8 6 2-013746 16,5 9,8 V-34746 18 60 V-41706 20,5 5 2-077316 22 5 2-019146 27,5 6,5 2-06494
6,2 13,3 60 V-26156,4 11 70 V-36096,4 14,5 3,9 2-091396,5 9 1,5 2-090936,5 15 2 2-046086,5 18 12 2-038596,7 7,7 0,9 2-123666,8 14 30 V-17846,9 10 2 2-029497 11,6 2,5 2-061737 11,6 3,7 2-061247 11,7 14 V-28877 12 12 2-036197 13 8 2-009817 13,5 3 2-091827 15 4 2-121057 15 9 2-128007 15 120 V-34767 15,6 2,3 2-070757 18 4 V-0478
Nennmasse Werkzeug-Nr.
Tool-no.: Tool-no.:dimension table dimension table
rubber fabric rubber fabric
144
di Da H Gummi GewebePolyure-
than13,5 22,5 3,6 2-0644813,5 23 10 2-0604113,5 30 300 V-276914 16 1,9 2-0914214 17,6 3 2-0789614 19 9 V-172414 20 28 V-257314 22 3,5 2-0668914 28 5 2-1215214 38,5 250 V-0695
14,2 20 2,2 2-0557114,4 19 2,5 2-1158014,5 26 15 V-036914,5 35 300 V-278015 18 2 2-0797415 21 2 2-1181215 22 3 2-0467515 22 4,5 2-0152415 23,5 15 2-0380215 28 30 V-146815 29 4 2-1134615 29 10 2-0380115 29 10 2-0380115 30 20 V-118315 30 30 V-118215 58 5 2-0264415 58 5 V-0621
15,2 23,5 2 2-0106915,5 21,5 75 V-298615,7 21,7 3 2-0518115,8 20,5 2 2-0222415,9 38,1 5,5 2-0280016 21 2 2-0527816 21 2,2 2-0552816 21 2,6 2-0669316 21 20 V-156116 22 4 2-1208616 22,5 98 V-242316 24 5,5 2-0763516 26 3 2-0554716 26 5 2-0575516 28 8 V-037616 28,7 6 2-0146516 36 3 2-0594816 38,7 200 V-3316
16,5 30 300 V-277116,5 35 300 V-278216,5 40 300 V-279116,8 22 3,1 2-0421217 20,6 3 2-0788317 30 300 V-055617 31 23,8 2-0862617 75 10 V-024517 90 12 V-0247
17,5 50,8 19 2-0279818 22,5 5 2-0368718 24 5 2-0182818 26 10 2-0002418 30 160 V-350018 32 13,7 2-07664
Nennmasse Werkzeug-Nr.
di Da H Gummi GewebePolyure-
than10 16,5 3,4 2-0632510 17,5 3 2-0876110 19 100 V-391710 20 2 2-1190910 21,8 6 2-0175810 22 40 V-056910 25 5 V-075710 25 25 V-076710 25 150 V-356210 26 15 2-0380510 27 14,5 2-0291110 30 40 V-002310 35 300 V-277410 36 5 2-0191310 38 6 V-024210 50 10 2-06130
10,5 30 300 V-276410,7 13,7 1,5 2-0934711 15 4,4 2-0904611 16 2,2 2-0669211 17 3 2-1212211 22 105 V-104211 23 25 2-0624011 24 5 2-0182911 70 10 2-09629
11,5 15,1 3 2-0789511,5 17 100 V-420111,8 14,8 1,35 2-0850211,8 16 2 2-0314512 14 2,5 2-0882512 17 1 2-0129812 17 100 V-364012 18 2 2-0517612 18 10 2-0002312 22 8 2-0416212 24 4 2-0055312 24 12 2-0135212 26 5 2-0224412 30 20 2-0072012 30 300 V-250812 32 5 V-044712 32 150 V-356812 33,7 6 2-0196012 40 300 V-115912 50 85 V-058512 55 8 V-024412 60 8 2-04668
12,5 20 300 V-126212,5 22 365 V-417612,5 30 300 V-276812,5 35 300 V-277812,5 40 300 V-278713 18 10 2-0156013 19 2,4 2-0525113 20 2,7 2-0231313 20 7 2-0909013 24 200 V-194113 24,5 12 2-1237813 25 35 V-045313 38 8 2-09215
13,5 19,1 52 V-3666
Nennmasse Werkzeug-Nr.Tool-no.: Tool-no.:dimension table dimension table
rubber fabric rubber fabric
145
di Da H Gummi GewebePolyure-
than25,4 32,4 5,5 2-0290925,4 37,5 14,2 2-0620626 38 10 2-0952426 40 300 V-382827 40 5 V-286527 41 4 2-1229427 44 30 V-405027 46 300 V-292827 50 9 2-06879
27,3 30,3 3 2-0497827,3 48,3 5 2-1259227,5 34,5 3 2-0603627,6 30 3,3 2-0959427,6 33 2 2-0933928 33 2,5 2-0856828 33 5 2-0804528 38 40 V-067228 39 1,5 2-0352728 48 10 2-07730
28,5 32,1 3 2-0789928,5 35 4 2-0614029 35 3 2-0518029 42 5,9 2-1135929 50 1,5 2-0850329 55 200 V-0704
29,4 41,9 6 2-0253129,5 45 50 V-229129,5 55 250 V-226730 33,4 12,7 2-0060630 36 1,5 2-1165830 36 3 V-048930 36 12 2-0446430 37 75 V-233330 40 30 V-089130 42 4 2-1107630 44 1,7 2-0855130 45 300 V-266530 48 5 V-092030 49,5 310 V-175830 50 4 V-045430 50 50 V-118431 45 3 2-06350
31,5 92,5 15 2-1127731,6 48 500 V-216732 37 5 2-0796632 43 6 V-0178
32,3 35,3 2,8 2-0765532,5 36,5 3 2-0655632,5 52 250 V-222333 43 225 V-416833 60 200 V-348734 5 3,5 2-0114034 37,6 3 2-0788534 39 20 V-377434 40 4 2-0144334 41 3,5 2-0247734 42 300 V-356534 45 6 2-0140134 47 140 V-114234 60 300 V-1211
Nennmasse Werkzeug-Nr.
di Da H Gummi GewebePolyure-
than18 34 10 2-0379818 35 5 2-0102318 38 10 2-0811118 43,7 6 2-0251318 56,7 6 2-02659
18,5 40 300 V-279319 20 0,8 2-1168919 29 5 2-0401319 29 300 V-316919 31,5 4,5 2-0319719 40 150 V-285219 42 10 2-04308
19,5 22 20 V-001319,5 23,1 3 2-0788419,5 26 153 V-383919,5 31,5 150 V-271919,5 40 350 V-198720 23,4 12 2-0060720 26 4 2-0180220 26 15 2-0380020 30 8 2-0180320 32 300 V-372920 34 10 2-0380420 40 10 2-0772920 43,5 29 V-287320 47 4 2-0247620 70 40 V-1873
20,5 32 21 2-1127421 6 4 2-00551
21,5 36,3 4,4 2-0902021,9 25,9 1,35 2-0850122 12 4 2-0055222 26 3 2-0674622 30 300 V-277322 31 1 2-0153622 38 25 V-1781
22,2 47,6 12,7 2-0279922,5 26,1 3 2-0789722,5 27,5 2 2-0591422,5 38 200 V-293122,6 27 1,5 2-0942423,5 36,3 4 2-0927123,6 26,6 2,8 2-0789423,8 24,6 3 2-0789024 34 6 2-0763424 40 35 V-118124 40 40 V-118024 45 200 V-0705
24,4 30 2 2-0468324,5 34 12,2 2-0895024,8 31,5 3 V-047425 33 1 2-0711525 35 5 2-0609525 35 300 V-055725 49,4 210 V-337225 62 4 2-0400325 155 50 V-2127
25,4 29 3 2-0789825,4 32,4 2,5 2-02908
Nennmasse Werkzeug-Nr.
Tool-no.: Tool-no.:rubber fabric rubber fabric
nominal dimensions nominal dimensions
146
di Da H Gummi GewebePolyure-
than49 55 3 2-0991549 62 200 V-155749 100 110 V-346950 55 5 2-0796850 56 4 2-0885250 65 8 2-0717750 70 10 2-1236750 70 55 V-223750 80 30 V-178650 150 14 V-0625
50,5 59,5 3 2-0985051,5 69 57 V-090052 64 10 2-1242952 68 6 2-1229652 70 40 2-0307853 65 16 2-0997053 88,5 17,5 V-270554 58 2 2-0775154 90 5 2-1229555 75 3 2-0182755 75 10 2-04562
55,5 59 16 2-0057356 90 67 V-417856 102 15 V-0603
56,4 67,3 5,4 2-1212658 72 7 2-0183658 73 6 2-0502959 78 300 V-4126
59,8 64 3 2-1126859,9 80 120 V-090160 67 3,5 2-0239360 70 2 2-0215460 75 12 2-0265860 100 5 2-0537861 64 16,5 2-0060162 90 200 V-169362 97 15 V-3133
62,5 71 45 2-1194063 71 1,5 2-1247763 75 10 2-1243064 82 4 2-1107864 82 9 V-240065 85 12 2-0934865 86 11 2-0178665 122 3 2-0241266 86 8 2-0467467 81 5 V-143568 72 18 2-0060268 78 4,5 2-0152368 80 6 2-0524869 81,3 6 2-0979670 80 5,5 2-0151570 90 4 V-081870 102 50 V-178770 110 32 V-184971 75 2,5 2-0788971 75 18 2-0782771 96 200 V-2591
71,5 75 18 2-0057471,5 81 10 2-12023
Nennmasse Werkzeug-Nr.
di Da H Gummi GewebePolyure-
than34 65 5 V-0702
34,3 46,9 6 2-0253235 40 3 2-1181335 52 8 2-0125135 58 5 V-091636 45 6 2-0140236 45 7 2-0901637 43 89,5 V-275937 47 30 V-0935
37,73 40,87 1,27 2-1287638 41 2 2-0797538 48 29 V-153938 48 30 V-064138 48 53 V-377638 59 205 V-359638 65 200 V-3493
38,5 46,5 5 2-0523338,5 58,5 31 V-270439 65 5 V-2872
39,6 49,4 200 V-378540 43,6 3 2-0788640 45 5 2-0796740 47 0,4 2-0216440 50 60 V-399240 90 15 V-1152
40,3 65 6,5 2-1110540,5 70 185 V-420341 54 5,9 2-1136041 56 4 2-12293
41,28 47,2 3,05 2-1266442 51 1,5 2-1223542 54 12,8 2-0784742 55 5 2-0246142 58 3 2-0682242 70 2 2-02154
42,3 54,3 38 V-270843 70 200 V-116943 80 5 V-0706
43,5 78,5 4,5 V-001643,9 48 3 2-1127144 49,6 250 V-160444 50 3 V-049044 52 4 2-0163045 53 4 2-0133545 53 8 2-0762045 75 6 2-0645445 200 12 V-2878
45,5 55,2 5 2-0565446 51 2,5 2-0856746 55 16 2-0292846 57 140 V-114146 66 10 V-3959
46,9 52,7 3 2-1127047 51 2 2-0814547 60,3 8 2-0342847 62 13 V-107248 52 2 2-0713948 75 200 V-158348 85 5 V-0703
48,5 54,4 3 V-2965
Nennmasse Werkzeug-Nr.Tool-no.: Tool-no.:
rubber fabric rubber fabric
nominal dimensions nominal dimensions
147
di Da H Gummi GewebePolyure-
than117,9 200 200 V-1896118 135 7 2-05030118 150 12 V-0779120 140 10 2-07720123 145 500 V-2123124 136 25 V-3608126 136 8 2-05913130 146 8 2-07671130 155 4 2-11081130 170 20 2-03328134 149 3 2-03217138 148 5 2-11597138 150 26,5 2-11179140 160 2 2-11539140 160 20 V-0377143 176,4 28 2-09689145 220 18 V-0473150 166 22,5 V-2693150 180 10 2-12392
150,5 199,5 10 2-11988150,5 201,5 10 2-11989150,5 203,5 10 2-11990150,5 204,5 10 2-11991152 159,4 3,7 2-06783157 185 11 2-09540160 185 4 2-11082
161,9 177,8 152 V-2183162 180 20 2-05510165 200 12 2-09950165 225 25 V-2571168 180 26,5 2-12290168 188 20 V-1827168 213 6 V-0535175 195 2 2-11538
177,9 200 200 V-1896184 191,4 3,7 2-06782186 198 6 2-11467187 206 10 2-05961195 270 18 V-0031200 240 10 2-12349203 228,5 19 2-09766205 225 2 2-11537
206,8 225,5 10,5 2-08659210 223 6,5 2-06562210 226 10 2-08587210 230 4 2-06304214 273 70 V-2427215 241 12,5 2-05872220 250 30,5 2-09284
228,6 260,4 20 2-07189230 245 14,5 2-09554230 275,6 28 2-09871237 250 6,5 2-06563250 259,2 17 2-09803250 286 8 V-0055278 294 8,5 2-09954278 380 70 V-0796284 308 12 2-06961
289,9 329,9 12 2-12003290 329 1 2-06379
Nennmasse Werkzeug-Nr.
di Da H Gummi GewebePolyure-
than72 90 5 V-419372 92 10 V-142372 100 25 V-075375 85 5 2-03292
75,5 80 2,5 2-0749776 85 250 V-327276 86 10 2-1243176 90 10 2-1241776 100 25 V-2783
76,5 80,5 2 2-0626876,5 80,5 100 V-154577 110 10 2-1282077 110 10 V-3727
77,8 100 15 2-0994377,8 100 200 V-251678,5 96,5 9 2-0291579 89 4 2-0992879 97,5 9 2-0977880 95 40 V-185980 100 25 V-278480 100 135 V-357580 105 4 2-1107981 96 12 2-0394482 92 8 2-1150282 114 8 2-0317584 100 8 2-0195884 100 17 2-0306284 100 25 V-278584 104 16 2-0368384 108 4,7 V-276085 99 3 2-0363385 112 6 2-1100585 115 8 2-1200486 90 2,5 2-0714086 100 25 V-278686 100 200 V-337788 100 5 2-0459989 107 9 2-0291689 107,5 9 2-0977790 120 200 V-2612
90,5 94,5 21,5 2-0177791 95 24 2-0057592 100 1 2-0363493 107 7 2-0995197 108,5 6 2-00702100 110 5 2-08405100 125 4 2-11080100 130 4 2-12292102 130 10 V-1352104 140 10 2-07817105 115 5 2-05444105 120 3 2-01957110 124 3 2-03668110 130 28 V-3940110 137 14,5 2-09411110 140 10 2-07356
114,3 127 3,175 2-03174115 125 45 2-08125115 145 10 2-12088
117,6 137 8 2-11103
Nennmasse Werkzeug-Nr.Tool-no.: Tool-no.:
rubber fabric rubber fabric
nominal dimensions nominal dimensions
148
di Da H Gummi GewebePolyure-
than290 350 1 2-06380290 350 4 2-09326297 400 70 V-0057298 333 20 2-11997300 320 4 2-06303
304,5 324 10 2-11688307,5 540 107 V-2321319,2 373,4 6,4 2-07544325 332,4 3,7 2-06781326 350 12 2-02470343 400 2 2-06273360 400 26 2-09333360 450 0,5 2-07912368 403 25 2-12373377 384,4 3,7 2-06780380 420 27 2-08885400 440 29 2-09311416 440 15 2-02285435 459 12 2-02469435 459 15 2-03987451 465 4 2-12792499 571 104 V-2184500 540 32,5 2-09327503 517 4 2-12793524 548 12 2-07938
Nennmasse Werkzeug-Nr.
EXAMPLES RE1
In the dimension table, only the rings producedfrom presses or poured tools are contained.Parts manufactured as tubes can be stung onthe wished height H.
RE
di
DaH
Tool-no.:
rubber fabric
nominal dimensions
149
MATERIALSThe seal has to be chosen with the same care as other construction elements. This applies to the shape and size as well as thematerial which must be suitable for the agent and the conditions of application. The large numer of various agents, pressures andtemperatures has resulted in a multitude of different elastomers and plastics finding their way into sealing-technology. Conversely,the development of modern machines has been significantly supported through advances in the rubber technology which havesimultaneously taken place.
Cross-linkd polymers with the known elastic characteristics are designated as rubber or elastomers. The non-cross-linked raw pro-duct is referred to as caoutchouc. The elasticity of the cross-linked product occurs when the individual polymer chains are pushedagainst one another under stress (tension, pressure), on relief or as a result of the lateral networks more or less returning to theirinitial starting point. Opposed to this, thermoplasts (polyethylene, polystyrene, PTFE) exhibit no lateral networks nor elasticity; theyremain deformed after elongation. Thermoset materials (phenol or epoxy resins), with a high portion of rigid, short networks, beco-me deformed by only a few per cent points.The multitude of available elastomer grades results from the different caoutchouc types which can be made into different materialsthrough corresponding formulations. The task of the mixture development ist to create an elastomer material out of a raw caout-chouc which- due to its chemical structure - has shown certain characteristics, with characteristics that are optimized for the requi-red conditions of application.
Of greater significance ist the resistance of an elastomer to the different agents. With this, two types of transformation occur: phy-sical and chemical processes. The first includes the swelling or shrinkage (change in volume) of an elastomer in an agent. In thecase of swelling, the elastomer absorbs an agent whereby the technical values change, for example, the rigidity values are redu-ced. But this does not mean that the seal would not be able to function. As recommended values, a swelling of 10-25% can be tole-rated with static installation or 4-7% with dynamic installation. The elastomer can be mechanically destroyed by excessive swellingor the increase in volume leads to increased friction so that, for example, pistons can no longer be moved. In the case of shrinka-ge, compounding ingredients are dissolved by the medium. This case is critical for the practical application because through this,under certain conditions, the seal no longer sufficiently lies on the sealing surface and through this, leakage can result. Moreover,the danger of destruction through secondary action exists when, for example, the flexibility to cold deteriorates as a result of a dis-solving action of a plasticizer.
The chemical reaction of the agent leads most often to the destruction of the elastomer in that, through chemical reactions, the poly-mer chain disintegrates, oxidises or is changed in some other way. As a result, the material loses its technological characteristics.
These chemical reactions include ageing due to heat, reactions due to light, ozone and oxygen. The chemical reactivity dependson the structure of the caoutchouc. The mor unsaturated olefin double bonds there are in polymer chains, the easier chemical reac-tions take place (i.e. with NR). A saturated caoutchouc which contains no or only a few reactive double bonds is stable against che-mical reactions (i.e. EPM/EPDM, FPM). NBR, with a mean number of double bonds lies therefore, in respect to for example theheat ageing and the resistance to oxidation, between these extremes. Although CR contains just as many double bonds as NR, thechlorine atoms which are bound to the polymer chain, however, considerably reduce the reactivity.
A similarly simple relation exists also between caoutchouc and swelling in mineral oils and fuels (physical action). Mineral oils andfuels are, chemically seen, covalent compounds of hydrocarbons and therefore, are most compatible with chemically similar, cova-lent caoutchouc with pure hydrocarbon bindings. This consistency results in a good solubility in each other, that is, considerableswelling (i.e. NR, EPM/EPDM). If the caoutchouc contains a rising percentage of polar groups (chlorine, nitrile or ester groups), theswelling reduces accordingly, as is the case with NBR in the series of 18-38% contents of acrylonitrile (ACN). Fluororubber, whichcontains for the most part, fluorine-carbon-bonds show even less swelling in mineral oils. On the other hand, caoutchouc with polargroups opposed to polar solvents (ester, ketone, chlorinated hydrocarbons) are unstable. Hence, it follows that there is no elasto-mer material which is resistant to all polar and to all covalent solvents and their composition (varnish solvents). The silicone rubberwhich possesses no hydrocarbons but rather a silicone-oxygen-skeleton and therefore reacts differently (resistant to mineral oilsand heat / air), is an exception.
HHEECCKKEERR®® GGSSMM®®
MMAATTEERRIIAALLSS
150
MECHANICAL-TECHNOLOGICAL TESTS
Each material is carefully tested before its release and use. Various, important characteristics will be briefly discussed in the follo-wing section.
HARDNESS (DIN 53505, DIN 53519-2)The most common quality of characterization of elastomers is the hardness. It is measured in Shore A or D according to DIN53505. Elastomers are normally tested according to shore A. Above the approximately 95 Shore A, the measurement takes placeaccording to shore D. The two procedures are differentiated by the shaping of the penetration piece and in the spring characteri-sic with which the penetration piece is to be stressed.
Another method ist the determination of the micro-hardness in IRHD according to DIN 53519, which especially finds application insmall sample pieces.
The shore hardness must be adjusted to the pressure demands. The softer the elastomer, the easier it is to be deformed and incertain conditions to be pressed into the opening. On the other hand, thanks to the better flexibility, a softer elastomer seals atlower pressures and on uneven surfaces. For most of the purposes of application, materials with 70 to 90 Shore A have beenwell proven. These types show an optimum of wishes for characteristics. Harder materials often show less elongation and a hig-her compression set. Softer materials are more easily deformed.
TENSILE STRENGTH AND ELONGATION TO TEAR (DIN 53504)Tensile strength and elongation to tear are referred to as comparison values for the characterization of elastomer materials. Inthe installed condition, only small elongations are permitted. Recommended values for the different elastomer types can be seenin the following diagrams.
TEAR RESISTANCE (DIN 53507)Of greater importance for the practical application ist the resistance to tear propagation whereby a cut elastomer part resists thepropagation of the tear whilst unter tensile load.
COMPRESSION SET (DIN ISO 815)The compression set indicates up to which percentage the induced compression of a test piece at a given temperature remainscompressed after the removal of the stress. A small compression set, therefore, means that the material recovers well. This is anadvantage for seals, especially with changing work conditions.
The standard test piece B is a cylindrical disc with a diameter of 13.0+/-0.5 mm and 6.3+/-0.3 mm thick. This test piece is compres-sed by 25% of its thickness (that means 6,0 mm thickness to 4,5 mm). It is stored in this condition for a defined time at a certaintemperature. After expiration of the test time, the test piece is released. After 30 minutes storage at room temperature, the thic-kness is measured (i.e., here 5,7 mm). That means, in this example, the compression set amounts to 20% (remaining deformation0,3 mm in respect to the original included deformation of 1,5 mm)
0 5 10 15 20 25 30 35 40 45
[ N/mm² ]
F P M
VM Q
H N B R
A C M
EP D M
A U / EU
C R
N B R
Wer
ksto
ff-B
asis
Zugfestigkeit (DIN 53504)
0 100 200 300 400 500 600 700
[ % ]
F P M
VM Q
H N B R
A C M
EP D M
A U / EU
C R
N B R
Wer
ksto
ff-B
asis
Reißdehnung (DIN 53504)
0 5 10 15 20 25 30 35 40
[ N/mm ]
FPM
HNBR
EPDM
CR
Werk
sto
ff-B
asis
Weiterreißwiderstand (DIN 53507)
NBR
CR
AU/EU
EPDM
ACM
HNBR
VMQ
FPM
h1h2
h0
DVR = h0 - h2
h0 - h1100 (%)
Elongation (DIN 53504)Tensile strength (DIN 53504)M
ATE
RIA
LS
MA
TER
IALS
Tear resistance (DIN 53507) Compression set schematic
151
THERMAL CHARACTERISTICSElastomers exhibit optimal characteristics over a wide range of temperatures and within this area, allow for a long life expectation.There exist, depending on rubber type, two temperature areas in which the characteristics are changed considerably. Below a certain temperature, the glass transition temperature, elastomers lose their elasticity and also their ability to be mechani-cally stressed. This transition is reversible, that is, after warming, the original characteristics are re-established. There are differentmethods for measuring the lower temperature limit, for example, thermoanalytic methods.
The upper temperature limit is determined by each effective agent. The continuos exceeding of the upper temperature limit leads,in contrast to exceeding the lower temperature limit, to non-reversible changes of the elastomer materials. The upper temperature limit is also determined by a weakening of thermoplastic materials. A constantly pass over the upper tem-peratur limit leeds to non reversible changements and therefore to a disruption of the material.
Approvals:With some applications from the multiplicity of the possibilities, for example in the food-area or in the gas-supply, special requestsfor the sealants are to be looked for. Only specially developed materials or materials with the necessary admissions are usable.This requires the corresponding knowledge of the manufacturers.
Application values for the individual material groups in the media water and air can be seen in the following diagram.The high ther-mal expansion coefficient of elastomer materials is to be observed during application. It is between 100 and 160 x 10-6.
0 10 20 30 40 50 60
[ % ] Bedingungen !!
FPM
VMQ
HNBR
ACM
EPDM
AU / EU
CR
NBRW
erks
toff
-Bas
is
Druckverformungsrest (DIN ISO 815)
-100 -50 0 50 100 150 200 250
Temperatur (°C)
F P M
VM Q
H N B R
A C M
EP D M
A U / EU
C R
N B R
We
rks
toff
-Ba
sis
Temperatureinsatzbereiche von Elastomer-WerkstoffenDie schraffierten Bereiche gelten nur für speziell optimierte Materialien.
Temperaturgrenzen sind immer im Zusammenhang mit dem Kontaktmedium und dem Betriebsdruck zu betrachten.
Compression set
CONDITIONS
MA
TER
IAL
24 h / 100°C
24 h / 100°C
24 h / 70°C / 100 °C
24 h / 100°C
24 h / 100°C
24 h / 150°C
48 h / 200°C
24 h / 200°C
MA
TER
IAL
TEMPERATURE LIMITS OF ELASTOMER MATERIALSThe hatched are is only for especially optimized materials.
Constant maximum temperature ans maximum pressure should notoccur simultaneously.
152
NORM MATERIAL
HARD-NESS
CONDITIONS ANDRESULT
DIN EN 682 258 FKM 80 Typ GB; Härte 80 (Range of temp.: -5/+50 °C)
DIN EN 549 258
266
707
FKM 80
FKM 72
NBR 72
Hardness H3; Class of temperature E1: 0/+150 °C
Hardness H3; Class of temperature E1: 0/+150 °C
Hardness H3; Class of temperature B2: -20/+80°C
GAS SUPPLY
FOOD
NORM MATERIAL
HARD-NESS
CONDITIONS ANDRESULT
FDA: 21 CFR 177.2600 117
126
128
202
204
212
287
293
297
302
317
VMQ 72
VMQ 60
VMQ 80
FKM 72
FKM 90
FKM 72
EPDM 73
EPDM 82
EPDM 75
HNBR 72
HNBR 72
DRINKING WATER
NORM MATERIAL
HARD-NESS
CONDITIONS ANDRESULT
Elastomerleitlinie
(UBA)
287
293
EPDM 73
EPDM 82
Seals, Range of cold and hot water
Seals, Range of cold and hot water
DVGW W 270
(11-2007)
287
293
EPDM 73
EPDM 82
Seals D1/D2
Seals D1/D2
OTHERS
NORM MATERIAL
HARD-NESS
CONDITIONS ANDRESULT
DIN EN ISO 10993-5 287 EPDM 73 Zytotoxizität / Biokompabilität
USP Class VI 287 EPDM 73 USP Class VI - 121 °C
OXYGENNORM MATE
RIALHARD-NESS
CONDITIONS ANDRESULT
Oxygen, gaseous 258
287
FKM 80
EPDM 73
max. 150 °C / max. 40 bar
max. 60 °C / max. 10 bar
125
m³]
APPROVALS / RELEASES MATERIALS GSM®
The stated maximum-temperatures are limits, that are to be seen in the context of the contact-medium and the
business-pressure. The duration-use-temperatures always lie lower. If you don’t find an acceptable material, please contact us.
154
HECKER® ELASTOMER MATERIALSBasis ofmaterial
MaterialNo.WS
colour(if notlack)
Hardness(+/- 5 ShA)
Temp.rangefrom (°C)
Temp.rangeup to (°C)
Media resistance Approvals WS
VMQ
MVQ
Silikon
105 blue 50 -40 + 230 hot air, oxygen, ozone,
natural surroundings,
animal and herbal fat
and oils
105
106 blue 60 106
107 blue 72 107
108 blue 81 108
117 grey 72 FDA 117
126 uncoloured 60 126
128 grey 80 FDA 128
FPM
FKM
Fluor-
elastomere
202 dark brown 72 -15 +250 mineral oils, fat,
treacly inflammable
hydraulic liquids, ali-
phatic and chlorinated
hydrocarbons, very well
for vacuum
FDA 202
204 90 FDA 204
212 72 -10 FDA 212
231 60 -30 223
232 72 232
241 61 - 10 241
242 72 242
258 80 -15 DVGW, BAM 258
266 72 DVGW 266
EPDM
EPM
Ethyl-
Propylen-
Elastomere
283 85 -40 +200 Hot water, superheated
steam, brake fluid, hydrau-
lic liquids based on glycol
or phosphoracid basis,
lyes, solvents.
Not resistant to mineral oil.
283
287 72 BAM, FDA, KTW
USP Class VI,
Ozon, W270
287
293 82 KTW, FDA, Ozon 293
297 73 FDA
HNBR 312 75 - 25 + 170 aliphatic hydrocarbons,
mineral oils, fat, hot
waters, glycols, good
mechanical qualities
302
317 74 -20 FDA 308
CR 528 86 - 40 + 120 refrigerants 528
556 62 556
557 71 557
NBR 602 73 - 50 + 120 mineral oils, fats, fuels,
hydraulic liquids, salty
liquids, watered acids
and lyes
602
603 82 603
607 72 - 40 607
636 65 - 30 636
637 71 DVGW 637
638 85 DVGW 638
655 50 655
678 80 678
707 73 DVGW 707
857 75 - 20 857
858 87 858
859 92 859
877 67 877
The stated maximum-temperatures are limits, that are to be seen in the context of the contact-medium and the business-pressu-
re. The duration-use-temperatures always lie lower.
HECKER® POLYURETHANE-MATERIALS
Very high tensile strength and elongation to tear, very high resistance to tear propagation, good
resistance to mineral oils and fuels.
Basis Material colour hardness Temperature CharacteristicGroup WS (± 5 ShA) range features
Polyurethane 900 nature 94 - 20 + 90 VULKOLLAN® Cast material
AU 907 nature 72 - 20 + 90 VULKOLLAN® Cast material
910 nature 81 - 20 + 90 VULKOLLAN® Cast material
917 nature 76 - 20 + 90 VULKOLLAN® Cast material
918 nature 88 - 20 + 90 VULKOLLAN® Cast material
Polyurethane
EU 968 red 85 - 30 + 90 good hydrolyse resistance
969 red 96 - 30 + 90 good hydrolyse resistance
Polyurethanes are not applicable for the use in aromatic carbons, chlorinated medias, solvents, alkaline solutions and acids.
155
HECKER® FABRIC MATERIALS
BasisGroup
Fabric MATERIALWS
Colour Hardness(+/-5ShA)
Temp.range (°C)from:
Temp.range (°C)up to:
Characteristicfeatures
Pecularities
FPM
FKM
Fluor-
elastome-
re
cotton
aramide
022
025
black
black
94
94
-15
-15
+200
+200
mineral oils, fat, treacly
inflammable hydraulic
liquids (HFD), aliphatic,
aromatic and chlorinated
hydrocarbons
CR aramide 054 black 94 -40 +110 refrigerants
NBR cotton 071
072
089
090
094
black
black
black
black
black
94
94
94
98
98
-25
-25
-25
-25
-25
+120
+120
+120
+120
+120
mineral oils, fat, fules,
hydraulic liquids, salty
liquids, watered acides
and lyes
Standard for use in
hydraulics
materials for thrust
rings and support
rings
HECKER® PTFE MATERIALS
Basis Group MATERIAL WS
Colour Temp.range (°C) from:
Temp.range(°C)up to:
Characteristicfeatures
Pecularities
PTFE virginal 7010 white
- 200 + 260
Outstanding resi-
stance to chemicals
(The properties can
be adapted to diffe-
rent applications due
to an appropriate
addition of special fil-
lers. PTFE with filles
enlargen the range of
application and ena-
ble the optimazation
of the material for a
specific application.
PTFE with glass 7214 grey
PTFE with carbon 7238 black
PTFE with bronze 7280 brown
PTFE with bronze and carbon 7281 brown
PTFE cold-flow-reduced, pure 7060 white cold-flow-reduced
PTFE cold-flow-reduced, with carbon 7338 black
FLUID SEALS - SEALING SYSTEMS FOR THE USE IN FLUID APPLICATIONS
Fluid-technology for hydraulics and pneumatics transfers strength and performance to boost, to control and to move.
Consequently it matters to the fluid technology that in determined areas an overpressure is built up and is hold as long as this
requires the function.
Because a simple sealing gap, also as a function of his geometry and the viscosity of the pressure medium, this demand without
leakage does not fulfil, become in most cases contact sealings in use.
The requirements to these sealings or to the used sealing materials are of varied nature:
- avoidance of leakage
- "automatic" reacting to pressure changes
- effectiveness about a wide temperature area
- good slip behaviourness
- high abrasive strength
- compatibility with the pressure media
- material elasticity (to the balance of dimension changes,for example, with expansionsby high pressure)
- controversy with moved sealings: Density versus friction
- compromise between necessary sealing effect and more sufficent lubrication
They form a huge number of factors of influence and their interaction as a basis for an extremely complicated tribological system,
consisting of sealing, countersurface and medium:
- movement speed
- temperature
- viscosity, chemical and physical properties of the medium
- Form and physical properties of the sealing element
- quality of the involved surfaces
- specific installation situation
This requires, on the one hand, a constant advancement of the materials, on the other hand a constant optimisation of the
form of the sealing.
The fluid-technology makes high demands for the developers and manufacturers from sealing systems.
The application fields, for example in mobile and stationary arrangements, agricultural and forest applications, tool machines or in
the air and space technologies are varied broadly and are characterised by most different operating conditions and demands.
Pressures up to 60 MPa (600 cash), temperature areas from-40 to +300 °C, together with other influences of the surrounding put
the range of the application conditions.
To be able to guarantee the functional security the sealing systems have to be chosen material-sided and geometry-sided very care-
fully.
The users expect quick and exact forecasts about the long time behaviour from sealings. On the base of continuous basic research
becomes the knowledge of the tribological procceses an constanty extent and the sealing geometry is in an enduring development
stage e.g. with help of the FEM (Finite elements method).
BASIC MATERIALS
NITRILE RUBBER (NBR)Butadien-acrylonitrile-copolymer with superior resistance to swelling in aliphatic hydrocarbons, normal gasoline and mineral oils.
This resistance against swelling is even more pronounced with an increasing percentage of acrylonitriles, furthermore, the gas den-
sity is improved in this series. On the other hand, the flexibility to cold and compression set improves with an increasing acryloni-
trile percentage. Permanent temperature in mineral oil: 110°C.
Good ageing stability.
Low compression set
Resistant to: Petrol, mineral oil, fuel, dulute acids and alcaline solutions.
Not resistant to: Aromatic hydrocarbons (toluol, xyloles), chlorinated hydrocarbons (tri, per), ketones, esters, ether, brake fluids
based on glycole and hardly combustible hydraulic fluids of the HFD group.
HYDROGENATED NITRILE RUBBER (HNBR)Hydrogenated nitrile rubber (HNBR) is obtained throuth total or partial hydrogenation of nitrile rubber (NBR) whereby the double
bonds in the main chain must be neutralized. The saturated main chain offers a very good resistance to oxidation and chemical
reactions. The nitrile group is responsible for the swelling resistance to oil, fuels and other covalent agents. Emphasis must be pla-
ced on the excellent physical characteristics: the good abrasion resistance, the resistance to hot air and ozone. The resistance
against swelling increases, as with NBR, with the arylonitrile (ACN) content. The application data are the same as for NBR, howe-
ver, a higher resistance to temperature and a substantially better ageing stability is guaranteed.
156
CHLOROPRENE RUBBER (CR)This rubber type is difficult to ignite, shows good elasticity and cold flexibility as well as excellent conduct against weathering and
ozone influences.
Permanent temperature: 100°C
Resistant to: Mineral oil (medium resistance against oil), alcaline solutions and acids, refrigerants (frigenes, freones).
Not resistant to: Aromatic amines, chlorinated hydrocarbons, ketones, esters, ether.
ETHYLENE-PROPYLENE RUBBER (EPM/EPDM)Contains only a low percentage of oxidation sensitive double bonds and through this, has a very good ageing stability and a good
resistance against warmth and ozone.
Very good compression set.
Resistant to: Hot water, vapour (up to 180°C), lees, acids, alkaline solutions, ketones, esters, brake and hydraulic fluids based on
glycole (HFC).
Not resistant to: Petrol, mineral oil, aromatic amines and chlorinated hydrocarbons.
SILICONE RUBBER (VMQ)Through the special chemical formulation with silicone and oxygen atoms, VMQ contains a series of excellent characteristics:
• very resistant to ozone and oxygen
• very good ageing stability
• applicable at dry heat of up to 200°C
• best low temperature flexibility up to -60°C
• low compression set with medium resistance to tear propagation
• very high resistance to tear propagation with higher compression set
Resistant to: Hot air, mineral oils (up to 150°C), water (up to 100°C), aqueos acids and alkaline solutions
Not resistant to: Fuels, aromatic amines, chlorinated solvents, esters, ketones, concentrated acids and alkaline solutions, hot
vapour.
FLUORORUBBER (FKM)Excellent chemical and temperature resistance. Excellent resistance also to oxygen and ozone.
Applicable up to 200°C
Resistant to: Oils, fuels, hardly combustible hydraulic fluids (with the exception of strongly polar types like Skydrol 500A), aromatic
amines, chlorinated hydrocarbons, acids and alkaline solutions.
Not resistant to: Polar solvents (ketones, esters), short chain alcohols (methanol), short chain carbon acids (acetic acid), amines,
ammonia, brake fluids based on glycole.
POLYACRYLATE RUBBER (ACM)Very good heat and oil resistance, even against oils containing additives. Good ageing and ozone stability.
Resistant to: Mineral oils up to 150°C
Not resistant to: Hot water, vapour, aromatic amines, chlorinated hydrocarbons, esters, ketones.
POLYURETHANES (AU, EU)Very good materials which are resistant to wear and structurally stable and which have an excellent elasticity. Due to the high resi-
stance to abrasion they are suitable for rough service conditions.
Resistant to: Mineral oils, normal petrol, type EU also against water-containing hydraulic fluids of the HFA type.
Not resistant to: Hot water, acids, alkaline solutions, aromatic amines and chlorinated hydrocarbons.
RUBBER-IMPREGNATED FABRICSFor seals which are exposed to high mechanical stress (i.e., as a result of high pressure to be sealed) the stability of the pure ela-
stomer is no longer sufficient. For such cases, there are fabric-reinforced materials. The surface structure allows the deposition of
lubricants and with this, promotes the necessary formation of lubricating film between seal and counter surface. In addition to this,
larger housing gaps can be spanned with fabric seals and pressure rings.
Cotton fabric in different strengths and an aramide fabric are available. These are impregnated with NBR, CR and FPM. The app-
lied aramide fabric is distinguished by excellent stability characteristics and a high resistance to temperature. The applicability is
limited in steam, acid and lyes.
THERMOPLASTIC SEALING ELASTOMERSIn this material group it is tried, to infer rubber-elastic properties-elastic qualities with thermo-sculptural processability. This is pos-
sible in different ways.
One of the possibilities is is the mixing of not or only weakly linked up rubber with thermoplasts (blends). As a result you get pro-
cessable thermo-plastical material with the behavior of elastomers. However, these materials have only a subordinated meaning
in the sealing technology.
157
158
ELASTOMERS FOR SEALING TECHNOLOGYThe extreme temperature-borders only are valid in each case for specifically optimized
materials. They are to be always viewed in the context of the contact-medium.
Polymere Abbreviations as per Brand names Temperature Costs
DIN ISO 1629 or (selection) range (°C) (relative)
ASTM D 1418-85
Nitrile NBR Perbunan® -55 up to +120 1
Europrene N®
Chloroprene CR Baypren® -50 up to +100 1
Neoprene®
Polyurethane AU / EU Vulkollan® -35 up to +110 6
Urepan®
Ethylene-propylene EPM/EPDM Buna EP® -50 up to +180 1
Vistalon®
Nordel®
Polyacrylate ACM Nipol AR® -30 up to +150 4
Hydrogenated nitrile HNBR Therban® -35 up to +165 8
Zetpol®
Silicone VMQ, PMQ, PVMQ Elastosil® -100 up to +220 4-20
Silopren®
Fluor silicone FMQ, FVMQ -60 up to +175 30
Fluor FKM Viton® -30 up to +250 15-50
Dyneon®
Tecnoflon®
Dai-EL®
Perfluorkautschuk FFKM Kalrez® -10 up to +325 2000
MECHANICAL-TECHNOLOGICAL TESTING METHODS
Characteristics Test specification Unit
Hardness DIN 53505, 53519 ShA, ShDIRHD
Density DIN 53479 g/cm³
Tensile strength DIN 53504 N/mm²
Elongation to tear DIN 53504 %
Tear resistance DIN 53507, 53515 N/mm
Compression set DIN ISO 815 % (condition)
Abrasion DIN 53516 mm³
Low temperature properties DIN 53545 °C
TR10 ASTM D 1329 °C
Behavior in fluids DIN 53521
THE MOST COMMON TPE TYPESOther efforts are linking to a copolymerisation between rubber and thermoplasts, or in using polyamide, polyester or polyurethanein segments. Common characteristics of these combinated copolymers is the physical crosslinking between the intermolecular forces. A chemical interlinking does not take place. The representatives most important for the sealing industry ofthis group are thermo-plastic polyurethanes (TPE U) and the polyetheresters (TPE-E).
TPE-O and TPE-X No chemical cross-linkingTPE-U Thermoplastil polurethanes (AU, EU)Others MPR, EATPE-E PolyetherestersTPA-A PolyetheramidesTPE-S Styrol-triblocked-copolymers
THERMOPLASTIC POLYURETHANES (TPE U)On account of her versatility become thermoplastic polyurethanes (TPE U) more and more used in the sealing industry. Reasonsfor it are the excellent wear-resistance and the extruding resistance of these materials. Also with the tear resistance, the tensilestrength and the elongation to tear, the TPE-U materials have an advantage in comparison to standard elastomers.
For TPE U hard segments and soft segments become tightened about an urethane reaction. The hard segments are able to cry-stalline with themselves. The macromolecules thereby physically link up. At higher temperatures these areas can be broken up.The TPE U can be thereby processed thermo-plastically.
By variation of the hard segments and soft segments a big number of optimised thermoplastic polyurethanes can be realized.Customizing for specific applications or contact medias is possible.
Standard TPE U materials have a very good resistance against mineral oil-basic media. Optimised TPE U are often very good resi-stant to hydrolysis and suitable for HFA-, HFB-, HEES-and HETG liquids. Even for the application in acids and lyes are materialsavailable. Indeed, materials for unpolar media, as a rule, are not suitable for polar media, and vice versa. There is not the univer-sally applicable material existing.
For the fluid power sealing applications common TPE-U materials lie in the hardness area from 80 Shore A to 70 Shore D. Theirapplication temperature area lies with approx. from-35 to 100°C. Optimised materials also leave use temperatures to-50°C or for ashort time up to 145°C.
Thermoplastic polyetheresters (TPE-E)
TPE-E-Materialien also are blockcopolymeres with hard- and soft-segments. They possess very good wear-qualities, high solidi-
ties, a high flexibility and very good constancy against oils and hydraulics-liquids. These materials are not applicable for polar medi-
as as acids, alkalines ord glycoles and temperates above 70°C. Typical TPE-E materials have a hardness between 35 and 75 Shore
D. The temperature range ist between -50°C up to 130°C.
PHYSICAL QUALITIES / MECHANICAL-TECHNOLOGICAL EXAMINATIONSThe judgment of the material-qualities with consideration on the intended application takes place analogously to the elastomeres
For the judgments of the behaviour in cold surroundings, also the TR-10-method is used (after ASTM D 1329).
THERMAL CHARACTERISTICSThermal-plastic elastomers are applicable for a wide range of temperatures. The lower temperature limit is determined by the glass
transition temperature. Below this limit the elastomers lose their elasticity and also their ability to be mechanically stressed. As a
result a leakage or a crash of the seal is possible. The glass transition temperature ist reversible. The upper temperature limit is
determined by melting of the materials and the parts. This deforming is irreversible.
159
PTFE (POLYTETRAFLUORETHYLENE)High temperature resistant plastic. due to extremely low friction, they exhibit no stick-slip effect. Good mechanical and excellent
chemical characteristics.
PTFE (Polytetrafluorethylen) is among the Thermoplasten under the plastics. It is belonging to the fluoride-plastic-group. PTFE is
created from the elements carbon and fluoride through polymerisation, that unites itself during the polymerisation to macro-mole-
cules and forms an unsolvable, part-crystalline plastic.
Applicable for temperatures from -200°C up to +260°C. Resistant to all media with the exception of alkaline metals, fluorine and
some fluorine compounds.
Mechanical properties and heat conductivity are variable by compounding this material with further filling materials.
PTFE SEALING MATERIALSNeside the so-called pure (virginal PTFE) the properties of PTFE can be adapted to different applications due to an appropriate
addition of special fillers. PTFE compounds enlargen the range of application and enable the optimization of the material for a spe-
cific application (e.g. for higher pressures or better abrasion resistance).
PROPERTIES OF PTFE SEALINGS• outstandig resistance to chemicals
• a very high operable temperature range (-200°C up to 250°C)
• a very low abrasion coefficient; even in the case of insufficient lubrication no stick-slip-effect
• antiadesive surface
• not inflammable; in the case of fire contact however toxic fluor gas would escape
• very good electrical insulation properties
• physiological recognized as safe, resistant to atmospheric corrosion and does not absorb water
In the machines and vehicle-construction, the outstanding gliding properties are used for sealings. Within the mentioned tempera-
ture-area, the material doesn't have any chemical changes also in the long run.
Most materials cannot be attached caused by the good anti-adhesion-behavior at PTFE. This has the advantage furthermore that
only low stick-slip effects appear with small relatively-movements. The abrasion rates are very low (0,04 to 0,09).
PTFE is completely fast to light without stabilizers - and UV-staedy. Its behavior is environment-neutral and gives away no pollu-
tants to its surroundings it caused by its insolubility.
No Cadmium, heavy metal-connections, fire-save-medias, FCKW or other toxic substances, are contained in pure PTFE.
HYDRAULIC FLUIDS
Combustible hydraulic oils (mineral oils): alloyed for higher stresses (HL, HLP)
Non-combustible hydraulic fluids
HFA oil in water emulsion with max. 20% combustible partes. For service temperatures from +5 up to +55 °C.
HFB water-in-oil emulsion with max. 60% combustible parts. For temperatures from +5 up to +60 °C.
HFC aqueous polymer solutions e.g. polyglycols as a mixture of polymers, solution aids and water. For temperatures from -20
up to +60 °C.
HFD waterfree hydraulic fluids
a) phosphoric ester HFDR
b) chlorinated hydrocarbons HFDS
c) mixtrues from a) and b) HFDT
temperatures from -20 up to +150 °C.
Biologically degredable hydraulic fluids
native oils (e.g. rape oil) HETG
synthetic esters HEES
When using these media we kindly ask you to contact our staff working in our laboratories.
160
APPLICATION FIELDS OF FABRIC-REINFORCED ELASTOMERS
Despite development of the special elastomer materials, these
cannot meet all requests, that are put at sealing-materials in the
heavy-duty-hydraulics and mobile-hydraulics.
For these operating-areas, HECKER can offer sealings from
fabric-reinforced elasomers.
The surface-structure of the sealings makes the storage of lubri-
cants possible and favors the necessary lubricating film with it
between sealing and counter-surface.
Additionally, with fabric reinforced materials and their
high extrusion-force a bigger casing-split than with sea-
lings from pure rubber can be bridged.
As materials, Aramid and cotton-materials are available
with different stitch-wideness and coatings.
With the HECKER-Standard-fabric-materials and
profiles, solutions for most sealing-applications
are possible.
For special-applications can in close cooperation bet-
ween the customer and our development-engineers
particular profiles and special-materials
be developed.
161
HECKER® HYDRO V HYDRAULIC ROD SEAL (PATENTED)
U-RING IN PERFECTION• highest sealing-effect even n the case of extreme operating-conditions by means of
optimal lip design and supporting elements with sealing function
• permanent good operating behaviour by means of stabilized lubricating film and
exactly defined position in the groove
• low starting friction by means of medium storage within the supporting elements
• supporting elements with storage effect and defined leading-back of the lubricating
film during the return stroke of the rod
• high abrasion resistance, minimal wear
• low compression set, ensuring a long-term sealing function
• uncomplicated installation
FUNCTIONING PRINCIPLE OF U-RINGSU-rings are known as reliable sealing elements for the sealing of rods and plungers with
reciprocating movement.
The contact pressure between sealing lip and rod is decisive for the sealing property of
the U-ring. In order to achieve a high dynamic sealing effect, the sealing lip has to con-
tact the rod only in the area of the sealing edge, independent of pressure or speed.
With regard to a high service safety and a high wear resistance, it is necessary that a
lubricating film is formed in the contact area between sealing lip and rod. This very thin
lubricating film adheres to the rod when it is extended. Leakage-free operation is
guqranteed provided that the lubrication film gets back into the pressure chamber during
the return stroke of the rod.
HECKER® HYDRO V - U-RING IN PERFECTIONDue to the interaction of optimal lip design and supporting elements with sealing func-
tion, the HECKER Hydro V-ring offers the preconditions for high sealing capability and
long service life.
Our developed V-shaped supporting elements guarantee best function of the sealing lip for the whole operating range, as
uncontrolled deformations of the U-ring due to the service parameters (pressure, speed, temperature e.g.) are pre-
vented.
In addition, the function of the U-ring is improved by means of the directional scraping effect of the
V-shaped support elements, leading to higher sealing capability.
When the rod ist extended, the lubricating film is partly scraped away and stored by the v-shaped sup-
porting elements. During return movement, the lubricating film adhering to the rod is directly led to the
sealing lip and forced back into the pressure chamber.
APPLICATIONHECKER® Hydro V-rings are applied for the sealing of rods and plungers with reciprocating movement in
hydraulic systems.
MATERIAL WS 979Highly wear resistant polyurethane, hardness 93 shore A, with low compression set, extremely high extru-
sion resistance and wide temperature range.
OPERATING RANGES(based on laboratory tests)
Media: hydraulic oils on mineral oil basis
Operating pressure: p < 400 bar (40 MPa)
Temperature: - 35° - + 100° C
Speed: V < 0,5 m/s
For particular cases of application, special materials are available (e.g. FPM, EPDM).
INSTALLATION DIMENSIONSDimensions according to the standard DIN/ISO 5597 or others. For the dimensions available, please contact
us.
sealing force
+ lubricating film
= functionsafety
optimal
sealing lip
+ active
V-support
= U-ring
in perfection
162
HECKER®
MATERIALS& MIXTURES
HECKER® supplies you not only with sealings and other
technical parts from most high-quality materials but sup-
plies you also with selected rubber-mixtures from own deve-
lopment or after your own formulas. HECKER® delivers fast and
inexpensively, also in small quantities.
Mixtures from the materials NBR, EPDM, CR, FPM or HNBR as furs, plates, unending-strips,
strained or in form of brutes to the direct processing.
Send us your inquiry or your problem. We select the material been suitable for you and make a
corresponding offer for you. We like to also make an offer for particular requests for you over a
material-development after your targets.
Become a content customer of GSM® sealings, technical parts and mixtures
"MADE BY HECKER® ".
HECKER
MATERIALS AT
ITS BEST
163
IF YOU NEED FURTHER INFORMATIONSPLEASE ASK OUR DEPARTMENT OF DEVELOPMENT
HECKER WERKE
Finite-Elements-Analysis
for development ...
and service
Under consideration of the not-linearbehaviour of elastomers, distortions,pressing forces and tension-tops canbe simulated under realistic operatingconditions.
Our designers can take these resultsto develop the best seal for yourneed.
ELASTOMERES
EVALUATION
GEOMETRY AT A PRESSURE OF 5%
FEM-MODELLING
Distortions through heat-lengthening and
pressure are crucial for the operating of
mechanical seals. The distortions become
visible in an FE-Siumulation. The results of
this simulations help to construct the best
performing sealing solution.
MECHANICAL SEALS
GEOMETRY AND ADDITIONAL CONDITIONS
CALCULATEDTEMPERATURESIN THE PARTBECOME VISIBLE
HECKER WERKEGmbH+Co. KG
Arthur-Hecker-Str. 1
D-71093 Weil im Schönbuch
Telefon ++49-(0)7157-560-0
Telefax ++49-(0)7157-560-200
www.heckerwerke.de
164
m³]
Product overview free of charge
Image brochure EUR 2,50
HECKER GSM® EUR 10,--
Complete set of brochures EUR 25,--
HECKER EURAFLON® (PTFE) EUR 5,--
GASKETS EUR 5,--
Stuffing box packings EUR 5,--
AEGIRA®-Mechanical Seals EUR 5,--
HECKER® POLYURETHAN EUR 5,--
HECKER® Innovation EUR 2,50
Company Movie (DVD) free of charge
We send the brochures by invoice. The amount will be discounted with your first order.Brochures for existing clients are free of charge.
HECKER® WERKEGmbH
Spezial-
fabriken
für Dicht-
und
Reibelemente
Arthur-Hecker-Str. 1D-71090 Weil im SchönbuchTelefon ++ 49 71 57 560-0Telefax ++ 49 71 57 560-200http://www.heckerwerke.de
e-mail: [email protected]
Please send the followingbrochures to my postal adress:
Company
Street
ZIP-Code / Town
Phone
email-adress
Mr. / Mrs
Department
Date / Signature
Comments
ORDER OF BROCHURES
165
166
HECKER WERKEGmbHArthur-Hecker-Str. 1D-71090 Weil im SchönbuchTelefon ++ 49-(0)7157 560-0Telefax ++ 49-(0)7157 560-200www.heckerwerke.de
HECKER DICHTUNGSPLATTEN
HECKER SEALING SHEETS
HECKER PLAQUESD’ÈTANCHÉITÉ
HECKER LASTRE DI GUARNIZIONE
HECKER STOPFBUCHSPACKUNGENHECKER STUFFING BOX PACKINGS
HECKER GARNITURES PRESSE-ÉTOUPE
HECKER GUARNIZIONI PREMISTOPPA
HECKER PTFE-ERZEUGNISSE
HECKER PTFE PRODUCTS
HECKER PRODUITS EN PTFE
HECKER PRODOTTI IN PTFE
HECKER AEGIRA®
GLEITRING-DICHTUNGEN
HECKER AEGIRA®
MECHANICAL SEALS
HECKER AEGIRA GARNITURES MÉCANIQUES D’ÉTANCHÉITÉ
HECKER AEGIRA GUARNIZIONI A TENUTA MECCANICHE
HECKER GSM® DICHTUNGENFÜR HYDRAULIK UND PNEUMATIK
HECKER GSM® SEALS FOR HYDRAULICAND PNEUMATIC SYSTEMS
HECKER GSM® joints pour systèmesHYDRAULIQUES ET PNEUMATIQUES
HECKER GSM® guarnizioni per SISTEMI HIDRAULICI E PNEUMATICI
HECKER POLYURETHAN-PRODUKTE
HECKER POLYURETHANE PRODUCTS
HECKER PRODUITS EN POLYURÈTAHAN
HECKER PRODOTTI IN POLIRETANO