Download - 2014 german-kozar-transmutation istr
THE ROLE OF A CHOICE OF THE TARGET FORM
FOR 99Tc TRANSMUTATION
• А.А. Kozar’, • V.F. Peretrukhin, • K. E. G e r m a n• Frumkin Institute of Physical
Chemistry and Electrochemistry of RAS,
• 31/4 Leninsky prosp., Moscow, 119071, Russia,
IT’S WELL KNOWN (SINCE 2000) - 99Tc transmutation can be the source of
artificial stable ruthenium 100–102Ru, the second of the mjst interesting elements
of the Periodic table.Such ruthenium has been synthesized
as a result of a neutron irradiation of Tc targets up to 20 – 70 % burn-up
(for 3 different groups of Tc targets)in experiments at SM high-flux reactor
in 1999 – 2003 .
Russian Tc - Transmutation program (1992-2003)------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
99Tc(n,g)100Tc(b)100Ru
0,00%
25,00%
50,00%
75,00%
1 2 3 4 5
Irradiation time, days
Technetium
-99 B
urn
up,
%
Hanford (USA)
1989
Wootan W
Jordheim DP
Matsumoto WY
Petten (NL)
1994-1998
Konings RJM
Franken WMP
Conrad RP
et al.
Dimitrovgrad
(Russia)
IPC RAS - NIIAR
1999 - 2000
Kozar AA
Peretroukhine VF
Tarasov VA et al.
6%
18%
34%
65%
10.5 days
193 days 579 days 72 days 260 days
0,67 %
= Pessimistic
2
Tc transmutation experiment (IPCE RAS – NIIAR, 1999-2008)In IPC RAS a set of metal disc targets (10x10x0.3 mm) prepared
and assembled in two batches with total weight up to 5 g.Transmutation experiment was carried out at high flux
SM-3 reactor ( NIIAR, Dimitrovgrad )
2nd batch: Ft > 2 1015 cm-2s-1
1st batch: Ft=1.3 1015 cm-2s-1
99Tc burnups have made:
34 6 % and 65 11 %for the 1st and 2nd targets batches
----
The high 99Tc burn-ups werereached and about 2.5 g of newmatter - transmutation rutheniumwere accumulated as a result ofexperiments on SM-3 reactor
These values are significantlyhigher of burnups 6 and 16 %achieved on HFR in Petten earlier
1 центральный блок трансурановых мишеней; 2 бериллиевые вкладыши;
3 бериллиевые блоки отражателя; 4 центральный компенсирующий орган
автоматический регулятор
стержень аварийной защиты
ячейка активной зоны с ТВС
компенсирующий орган
канал и его номер7 Д-2 81
91КО-
2АР
1
4 3
2
1
Д-3 Д-1
9 12
465666768696
6575 45558595
425262728292
4151617181
44548494
43538393
КО4КО3
КО191КО2
Д-2
2
6
1415
3
7
816
Д-4
Д-5
АР
2
17
Д-6
Д-10
Д-9
13
Д-8
АР1
19
4
10
Д-7
5
20
11 2118
Рис.5. Картограмма реактора СМ
2
IRRADIATION OF 99Tc METAL TARGETS IN NUCLEAR HIGH FLUX REACTORS
Dimitrovgrad transmutation experiment on SM high-flux reactor99Tc targets: metal disks Ø 6.0 0.3 mm and with thickness of 0.3 0.02 mm
Total targets mass is 10 g
Petten transmutation experiment99Tc targets: metal cylinders Ø 4.8 mm and with height of 25 mm 99Tc burn-up in Petten reactor are 6 % (T1) and 16 –18 % (T2).
3
99Tc BURN-UP AND HALF-CONVERSION PERIOD
№ of
group
Burn-up, % Irradiation
time,
eff. days
Half-conversion
period ,
eff. days measured calculated
1 192 202 72.7 240
2 453 505 262.7 305
3 705 707 424.8 245
Measured and calculated 99Tc burn-up and half-conversion periods in SM reactor.
99Tc burn-up in Petten reactor are 6 % (T1)and 16 – 18 % (T2).99Tc half-conversion period
2160 eff. days.burnT 2/1
Fig. 2. Calculated dependence of 99Tc burn-up onirradiation time () and its experimental values() for 3 groups of targets.
burnT 2/1
4
ARTIFICIAL Ru ACTIVITY DECAY
Activity of 106Ru + 106Rh in artificial Ru
b - , 371.6 days b - , 29.8 sec
106Ru (pure b -radiator, γ is absent) 106Rh 106Pd (stable)106Rh has 2 main g -lines with energies 511.8 keV and 621.8 keV
In 2006 106Rh activity in Ru from 20 % burn-up targets later 2100 days {5.7 T1/2 (106Ru)} after irradiation stop:
15 2 Bk/g of Ru total activity of pair 106Ru + 106Rh 30 Bk/g of Ru
Later 10 years after irradiation stop: = 3.2 0.4 Bk/g of Ru < = 3.7 Bk/g
Since 2010 artificial Ru from 20% burn-up targets can be used without limitation
Artificial Ru separated from 45 % and 70 % burn-up targets can be used in non-nuclear industry 9 and 8 years after synthesis correspondingly
1limA
106A
106A
Actinide content in Tc: 5•10–8 g An per g of Tc (better values are expensive!)Actinide fission product 106Ru (T1/2=371.6 days) can’t be separated from artificial Ru by chemical methods.
5
ARTIFICIAL STABLE RUTHENIUM PURIFICATION FROM 106Ru
Relative yield Y of 106Ru nuclei recoiling from spherical grains of technetium powder, in dependence on their diameter D (average fission-fragment path length is about 8 microns).
6
Transformation of disks Ø 6 mm × 0.3 mm incylindrical targets Ø 6 mm × 6 mm
Fig. 4. Relative position of Tc (Tc-Ru) grains in heterogeneous target.
7
Possible target chemical substances
• Tc Metal - Tc
• Tc Carbide - Tc6C
• Tc Dioxide - TcO2
• Tc Disulfide - TcS2
• and its mixtures with inert matter
8
Target substances1. Metal
Instrumentation
• Furnaces
• 6% H2|Ar industurialballoon mixture
• Ingots
• Rolling-mill
• et cetera…
Sample type :• Ordinary
Powder metal
• Fused metal
• Single crystal
• Foil
Startingmaterial :
• TcO2
• NH4TcO4
• R4NTcO4
9
1. Bulk Tc metal
• Set-up used for fusion and casting of Tc metal
• Single crystal Tc metal
11
1. Tc metal – foil, X-ray study
• d: 20 micrometers
• Systematic absence of X-ray reflex
• = Preferential orientation of crystallites with C axe perpendicular to the foil surface
12
1. Tc metal – foil, assembling13
• Spacer grid-bush with 99Tc targets (1) and aluminium core (2) of capsule for loadingin reactor.
1. Tc metal – foilchemical consequences
• Dissolution in HNO3 dramatically slowed-down starting from 20% Tc to Ru conversion
• Possible to increase the dissolution rate by aggressive agents addition (Ag2+, IO4
-) but corrosion problems arises
• Possibly the best reprocessing procedure –burning in O2 – not approved by industry to date
12
Target substances2. Tc Carbide
• Orthorhombic Tc metal is formed at low C content
30 40 50 60 70 80 90
0
25
50
75
100
30 40 50 60 70 80 90
0
25
50
75
100
B
I, %
2Theta, deg
Grey bars : ref. hcp Tc metal
Curves : exp. spectra
A
I, %
Target substances2. Tc Carbide
• Tc6C – non-stoechiometry
• Tc6C + nC excess carbon for no slowing-down
• Tc6C – formed by :
• Tc + C reaction
• Tc + C6H6
• R4NTcO4 thermal decomposition in Ar
Target substances – Tc carbide2. Tc6C + nC excess carbon
• EXAFS study of Tc6C + nC [1] –
wavelet presentation
[1] K.German, Ya.Zubavichus ISTR2011
1. Tc carbidechemical consequences
• Dissolution of Tc is more active as no RuC is known and so it is’nt formed during transmutation of Tc carbide to Ru - Tc and Ru being stabilized in separate phases
• Drawback: Possible mechanical inclusions of Tc in Ru residue at high burn-ups
• Mixtures with C excess could be the best choice because resonance energy neutrons are participating in transmutation due to enhanced thermolisation inside the target
12
1. Tc dioxidechemical consequences
• Preparation by chemical reduction – high impurity content
• Preparation from NH4TcO4 – similar to Tc metal
• Target instability due to excess O released (Ru is stabilised as metal)
• Some Tc2O7 formed at high burn-up
• This target material is not recommended
12
Preparation of artificial stable Ruthenium by transmutation of Technetium
• New Ruthenium is almost monoisotopic Ru-100, it has different spectral properties
• It is available only to several countries that develop nuclear industry
Tc target material:
Tc metal powder / Kozar(2008)
Tc – C composite Tc carbide / German (2005)
Rotmanov K. et all. Radiochemistry, 50 (2008) 408 :
• 99Tc transmutation can be the source of artificial stable ruthenium 100–102Ru.
• Metal homogeneous Tc targets are possible
• Tc carbide targets are favorabale
• Artificial ruthenium demanded exposure during 8 –10 years for application without restrictions
• Application of heterogeneous targets with nuclear-inert stuff to reduce a 106Ru radioactivity in artificial Ru
• The target form effect the artificial ruthenium purity at equal Tc nuclear density in irradiated volume.
Conclusions
• Transformation of disks in cylinders in the conditions of identical irradiated volume could allow to lower 106Ru concentration in artificial ruthenium. The minimum fission-fragment path length in Tc metal makes about 5 microns (average fission-fragment path length is about 8 microns). The corresponding form of a heterogeneous target is a tablet consisting of a mix of spherical Tc metal particle in diameter of 5 microns and a nuclear-inert stuff with Tc average density which in 20 times is less, than Tc metal. In this case all fission-fragments, including 106Ru, escape the Tc (Tc-Ru) grains to stuff. The average distance between Tc spherical grains is about 23 microns, between their surfaces is about 18 microns at regular distribution of Tc particles in a target.
• Fission-fragment path length in the most applicable nuclear-inert materials (such as ZrO2, Y2O3, MgAl2O4, MgO, Y3Al5O12, SiC, Al2O3, ZrO2-Y2O3, ZrO2-CaO and many others) makes 12 – 15 microns, hence hit probability of 106Ru fission-fragments in the next Tc grain is negligibly small. Artificial ruthenium from such target would be almost free from 106Ru nuclei. Additional purification of commercial Tc from actinide impurities would be not necessary at a choice of such target form instead of metal disks. In this case artificial ruthenium could be applied in non-nuclear field through 3 – 3.5 years after an irradiation, necessary to decay of transmutation product 103Ru (T1/2 = 39.3 days).
• References• 1. V. Peretroukhine, V. Radchenko, A. Kozar’ et al. Technetium
transmutation and production of artifical stable ruthenium. // Comptes Rendus. – Ser. Chimie. – 2004. – Tome 7. – Fascicule 12. – P. 1215 –1218.
• 2. А.А. Kozar’, V.F. Peretroukhin, K.Vразличные химические методы, а ские методы, а общий технеций, ка мишеналла рутения трансмутацией . Rotmanov, V.A. Tarasov. The elaboration of technology bases for the artificial stable ruthenium preparation from technetium-99 transmutation products. // 7th International Symposium on Technetium and Rhenium – Science and Utilization. Moscow, Russia, July 4 – 8, 2011. – Book of Proceedings. – P. 113. – Publishing House GRANITSA, Moscow, 2011. – 460 p.
• 3. А.А. Kozar’, V.F. Peretroukhin, K.Vразличные химические методы, а ские методы, а общий технеций, ка мишеналла рутения трансмутацией . Rotmanov, V.A. Tarasov. The elaboration of technology bases for the artificial stable ruthenium preparation from technetium-99 transmutation products. // Ibid. – P. 113.
Thank you for the attention !