ABOUT THE VEHICLE
APPLICATIONSSPEAKER NOTESDash Type:Aftermarket Type:Upper Door:
Lower Door:Speaker Adapter:Speaker Harness:Speaker Assembly:
Upper Door:Lower Door:
Speaker Harness:Speaker Assembly:
Front Speakers:
Rear Speakers:FACTORY COLOR CODES
12v Battery (+):12v Accessory (+):12v Ground (-):12v Amp Turn On (+):Illumination:Left Front Speaker (+):Left Front Speaker (-):Right Front Speaker (+):Right Front Speaker (-):Left Rear Speaker (+):Left Rear Speaker (-):Right Rear Speaker (+):Right Rear Speaker (-):
Honda Accord 2013
Make:Model:Year:
STANDARD/OPTIONAL- AM/FM/CD/SAT/MP3/NAV RADIO- 7 Speaker System- 3.5mm Aux/USB iPod Input
L: 1.00”W: 1.00”D: 0.50”
Dimensions:
Tweeter
1”5 1/2”SAT6N/A(3) Rivets Securing
Dimensions:UpperL: 0.00”
W: 0.00”D: 0.00”
N/A5 1/2”
N/A(3) Rivets Securing
New Custom Dash Single/Double Din
TBATBATBATBATBATBATBATBATBATBATBATBATBA
Radio Harness:Antenna Adapter:Blue Fusion/Bluetooth:AUX / iPod Interface:
Aftermaket Kits:
Harness/Interface/Adapters:
TBA
HA11BHAA2BBT1000/BT1200FMMOD02
Other:Auxilary Input:USB Input:
Center Console Center Console
Scosche Pro App
Aftermarket Kit:
TBA
The Speaker
Decklid Subwoofer: TBASpeaker Adapter: SAT6
Speaker Assembly: The SpeakerTBA
LowerL: 5.50”
W: 5.50”D: 2.50”
- Steering Wheel Controls- Bluetooth
L: 5.50”W: 5.50”D: 2.50”
Lower
Honda Accord 2013
Honda Accord 2013
+12 Volt Constant: Lt. Green/ Purple+12 Volt Acessory: Pink/ Black Ground: Black/ Lt. Green
R ight Positive: Orange/ Redh ative: Brown/ ink
OEM COLOR CODES
VEHICLE DISASSEMBLY
REAR DECK SPEAKERS
RADIO REMOVAL
Make: HondaModel: AccordYear: 2013
FRONT DOOR TWEETERS
PRELIMINARY:Disconnect the negative battery cable.
FRONT DOOR SPEAKERS
Scosche Pro App
1. TBA
1. With PRT unclip upper door molding, extract (2) T-25 Torx Screws.2. With PRT unclip and remove door handle panel, extract (2) T-25 Torx Screws.3. Extract (1) T-25 Torx Screw at bottom of door panel, unclip and remove side marker.4. Unclip door panel, unplug harness, release door lock cable and remove door panel.5. Extract (4) 8mm. Screws unplug and remove speaker.
1. With PRT unclip upper door molding, extract (2) T-25 Torx Screws.2. With PRT unclip and remove door handle panel, extract (2) T-25 Torx Screws.3. Extract (1) T-25 Torx Screw at bottom of door panel, unclip and remove side marker.4. Unclip door panel, unplug harness, release door lock cable and remove door panel.5. Extract (3) 8mm. Screws unplug and remove speaker.
1. With a PRT remove the panel above the push to start button, unplug and remove.2. With a PRT remove top panel above radio revealing (2) Phillips Head Screws, extract (2) Phillips Head Screws.3. With PRT remove both left and Right silver strips on center console.4. Extract (2) Phillips Head Screws at upper dash pocket and remove.5. Extract (2) 8mm. Screws located under radio.6. Carefully slide radio out, unplug and remove.
