Download - 2012 Exmark Full Product Info Guide
Exmark®, Exmark Parts Plus®, Lazer Z®, Metro®, Navigator,® Quest®, Turf Tracer®, Vantage™ and UltraVac® are registered trademarks, and CustomRide™, Micro-Mulch™, and Viking™ are trademarks of Exmark Mfg. Co., Inc.
Kohler® is a registered trademark, and Kohler® Command™ is a trademark of Kohler Co. Kawasaki® is a registered trademark of Kawasaki Motors Corp. Turf Mate®, Multi-Trac®, Turf Saver® and Turf Master® are registered trademarks of Carlisle Tire & Rubber Co. Honda® is a registered trademark of American Honda Motor Co., Inc. Kubota® is a registered trademark of Kubota Engine America Corp.
Check us out on the Web: www.exmark.com
Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features. We reserve the right to improve our products and make changes in specifications, designs and standard equipment without notice and without incurring obligation. Printed in the U.S.A. 2012.
Exmark Mfg. Co., Inc. • 2101 Ashland Avenue • P.O. Box 808Beatrice, NE 68310-0808
Call (402) 223-6300 • Fax (402) 223-6384
2012 PRODUCT INFORMATION GUIDE
Form No. 116-6521
1100
Overnight or Free Replacement paRts GuaRantee
Get the parts your customers need overnight, with the Exmark® Parts Plus® program.
see your exmark parts policy Guide for further details and restrictions.
32
EXM
AR
K SER
IES NA
ME C
HA
NG
EEXM
AR
K T
AB
LE O
F C
ON
TEN
TS
Parts Plus® ....................................... Inside Front CoverUltraCut™ Series 6 Deck ......................................... 4-5Series 5 Deck ............................................................. 6-7UltraCut Series 4 Deck ............................................ 8-9UltraCut Series 3 Deck ..........................................10-11UltraCut Series 2 Deck .......................................... 12-13Series 1 & Series 2 Deck ........................................14-15Spindle Design & Construction ............................16-19Cutting Blades ...................................................... 20-23Lazer Z® DS-Series ............................................... 24-27Lazer Z X-Series ..................................................... 28-31Lazer Z S-Series ..................................................... 32-35Lazer Z E-Series .................................................... 36-39Navigator® ............................................................40-43Pioneer® S-Series ................................................. 44-47Pioneer E-Series .................................................... 48-51Quest® S-Series ................................................... 52-55Quest E-Series ....................................................... 56-59Vantage®...............................................................60-63Eco-Friendly ..........................................................64-65Turf Tracer®X-Series ............................................. 66-69Turf Tracer S-Series ............................................... 70-73Viking™ Hydro .......................................................74-77Metro® .................................................................. 78-81Metro 26 ................................................................ 82-83Commercial 21 X-Series .......................................84-85Commercial 21 S-Series........................................ 86-87Turf Management Products.................................. 88-93Rider & Stand-On Accessories Chart .................. 94-95Walk-Behind Accessories Chart ........................... 96-97Operator Comfort ................................................. 98-99Custom Ride Seat Suspension System ......................98Tilt Frame & 3-D Isolation System Kit........................99Full-Suspension Seat ...................................................99
12-Volt Power Adapter ..............................................100Anti-Scalp Roller Kits ................................................100Equipment Cover ......................................................100Extended Driver Lever Kit ........................................101Hitch Kits ...................................................................101Hydro Maintenance Kit .............................................101 Premium Hydro Oil ...................................................102Premium Engine Oil ..................................................102Premium Fuel Treatment ..........................................102Jack & Receiver .........................................................103Light Kit .....................................................................103Non-Powered Bagger ...............................................104Operator Controlled Discharge ...............................104Power Deck Lift .........................................................105 Sun Shade..................................................................105Trash Container .........................................................105Turf Striping Kit ..................................................106-107Navigator Accessories ...................................... 108-1093-Bushel Bagger ....................................................... 110StandOn .................................................................... 110Walk-Behind Weight Set ........................................... 111Metro 26 Accessories ............................................... 111Commercial 21 Accessories ...............................112-113UltraVac® Commercial Collection System ....... 114-121Micro-Mulch Accessory .....................................122-1232012 Exmark Mulch Kit Chart ............................124-125Rider Productivity Chart ....................................126-127Engine Specifications.........................................128-129Horse Power Rating System .....................................130Model Number Cross Reference Chart ...................131Warranty Information ................................................132Model Year and Serial Number Charts....................133Exmark Technical Support .......................................133
exmark.com
54
ULTR
AC
UT
™ SERIES 6U
LTR
AC
UT™
SER
IES
6
standaRd on lazeR z® X-seRies models. • 5.5" deck depth. • No maintenance, sealed and non-greasable spindles; ....... 7.75"-diameter cutter housing with 1.75"-diameter splined . blade driver and 30mm (1.18" ) diameter spindle shaft. • Patented spherical bearing design on idler arm pivots .... requires only annual greasing. • Coned anti-scalp rollers.
A
B
D
C
E
GF
H
IJ
KL
OM
ultRacut seRies 6 FeatuRes
B. 5.5" deck depth. 4-point suspension. Full-floating. B. (3) 7-gauge steel reinforcement rings at spindle mounting area on 48," 52," 60" & 72."
c. High-strength polymer belt covers.
d Coned anti-scalp rollers.
e. 10-gauge steel top.
F. 7-gauge steel side skirt.
G. Heavy-duty trim side wear guard excludes 48" models.
H. No maintenance spindles and sealed and non-greasable. 7.75" diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft.
i. 18,500 fpm blade tip speed.
J. Patented flow-control baffles.
K. Patented spherical bearing design on idler arms requires only annual greasing.
l. No-maintenance, sealed ball bearings.
m. Flexible discharge chute reduces impact damage of trees and other obstacles.
76
SERIES 5SE
RIE
S 5
standaRd on lazeR z® ds-seRies models. • 6.0" deck depth. • 10-gauge top reinforcement plate and 7-gauge
reinforcement rings. • No maintenance, sealed and non-greasable spindles;
7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft.
• Patented flow-control baffles. • Adjustable discharge baffle. • Coned anti-scalp rollers.
A
BC
F
E
D I
H
GK
J
ML
N
O
seRies 5 FeatuRes
a. 6.0" deck depth. 4-point suspension. Full-floating.
B. 10-gauge top reinforcement plate and (3) 7-gauge steel reinforcement rings at spindle mounting area.
c. No maintenance spindles and sealed and non-greasable. 7.75" diameter cutter housing with 1.75" diameter splined blade driver and 30mm (1.18") diameter spindle shaft.
d. Adjustable front blow-out/vacuum baffle.
e. Adjustable discharge baffle.
F. Metal belt covers.
G. Coned anti-scalp rollers.
H. 10-gauge steel top.
i. 7-gauge steel side skirt.
J. Heavy-duty trim side wear guard
K. Patented flow-control baffles.
l. Patented spherical bearing design on idler arms requires only annual greasing.
m. Flexible discharge chute reduces impact damage of trees and other obstacles.
n. 18,500 fpm blade tip speed.
o. No-maintenance, sealed ball bearings.
98
ULTR
AC
UT
™ SERIES 4
ultRacut seRies 4 FeatuRes
a. 5.5" deck depth. 4-point suspension. Full-floating.
B. 10-gauge steel top.
c. 7-gauge steel side skirt.
d. (3) 7-gauge steel reinforcement rings at spindle mounting area excludes LZE 48" & 52" models.
e. Heavy-duty trim side wear guard excludes 48" models.
F. Lazer Z S-Series, Lazer Z E-Series, Pioneer S-Series, & Vantage - No maintenance spindles and sealed and non-greasable. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver.
Turf Tracer X-Series - No maintenance, sealed and non-greasable spindles. 5.40"-diameter cutter housing with 1.75"-diameter splined blade driver and 1.0"-diameter spindle shaft.
G. 18,500 fpm blade tip speed.
H. Patented flow-control baffles.
i. Patented spherical bearing design on idler arms requires only annual greasing.
J. High-strength polymer belt covers.
K. No-maintenance, sealed ball bearings.
l. Flexible discharge chute reduces impact damage of trees and other obstacles.
m. Round anti-scalp rollers.
A
B
D
EC
F
JI
HG
L
K
M
standaRd on lazeR z® s-seRies, lazeR z e-seRies, pioneeR s-seRies 60", tuRF tRaceR® X-seRies and VantaGe® 48," 52" & 60" models.
• 5.5" deck depth. • Three large, formed and welded 7-gauge steel
reinforcement rings on top of 60" & 72" decks provide superior strength and durability excludes LZE 48" & 52" models.
• Lazer Z S-Series, Pioneer S-Series, & Vantage - No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm- (.98")diameter spindle shaft and splined blade driver.
Turf Tracer X-Series - No maintenance, sealed and non-greasable spindles. 5.40"-diameter cutter housing with 1.75" diameter splined blade driver and 1.0" diameter spindle shaft.
• Patented spherical bearing design on idler-arm pivots requires only annual greasing.
• No-maintenance, sealed ball bearings.
ULT
RA
CU
T™ S
ERIE
S 4
1110
ULTR
AC
UT
™ SERIES 3U
LTR
AC
UT™
SER
IES
3
standaRd on tuRF tRaceR® s-seRies model. • 5.0" deck depth delivers unmatched cut quality. • Sealed, greaseless spindles require no maintenance year-round. • 5.40"-diameter cutter housing with 1.75"-diameter splined blade driver and 1.0" diameter spindle. • 7-gauge steel reinforcement rings at spindle mounting area.
standaRd on ViKinG™ 48" and metRo® 48" models. • 5.0" deck depth, adjusts providing flexibility for varying cutting heights. • Sealed, greaseless spindles. • 5.40"-diameter cutter housing and 1.0"-diameter spindle tube. • (3) 7-gauge steel reinforcement rings at spindle mounting area.
A
B
C
D E
H
G F
J
I
K
ultRacut seRies 3 FeatuRes
a. 5.0" deck depth. 4-point suspension. Full-floating.
B. 10-gauge steel top.
c. 7-gauge steel side skirt.
d. 7-gauge steel reinforcement rings at spindle mounting excludes Pioneer S-Series and Vantage 36" model.
e. Pioneer S-Series 44," 48" & 52" and Vantage 36" - 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver.
Turf Tracer S-Series - 5.40"-diameter cutter housing with 1.75"-diameter splined blade driver and 1.0" diameter spindle.
Viking 48" and Metro 48" - 5.40"-diameter cutter housing and 1.0"-diameter spindle tube.
F. 18,500 fpm blade tip speed.
G. Patented flow-control baffles.
H. High-strength polymer belt covers standard on Pioneer S-Series 48" & 52" models.
i. No-maintenance, sealed ball bearings.
J. Flexible discharge chute reduces impact damage of trees and other obstacles.
K. Round anti-scalp rollers.
standaRd on pioneeR® s-seRies 44," 48" & 52" and VantaGe® 36" model. • 5.0" deck depth provides Exmark's signature cut. • Sealed, greaseless spindles require no maintenance
year-round. • 7.75"-diameter cutter housing with 25mm- (.98")
diameter spindle shaft and splined blade driver. • 10-gauge steel reinforcement plate on Vantage 36"
1312
ULTR
AC
UT
™ SERIES 2U
LTR
AC
UT™
SER
IES
2
standaRd on pioneeR® e-seRies model. • 4.0" deck depth provides patented airflow technology. • Sealed, greaseless spindles require no maintenance
year-round. • 7.50"-diameter cutter housing contains 17mm- (.67")
diameter spindle shaft and hex blade driver.
seRies 2 FeatuRes
a. Pioneer E-Series - 4.0" deck depth. 4-point suspension. Full-floating.
Viking 36" and Metro 32" & 36" - 5.0" deck depth. Rigid.
B. 10-gauge steel top.
c. Pioneer E-Series - 10-gauge steel side skirt.
Viking 36" and Metro 32" & 36" - 7-gauge steel side skirt.
d. Pioneer E-Series - 7.50"-diameter cutter housing contains 17mm- (.67") diameter spindle shaft and hex blade driver.
Viking 36" and Metro 32" & 36" - 5.40"-diameter cutter housing and 1.0"-diameter spindle tube.
e. 18,500 fpm blade tip speed.
F. Patented flow-control baffles.
G. High-strength polymer belt covers are standard on Pioneer E-Series.
H. No-maintenance, sealed ball bearings.
i. Flexible discharge chute reduces impact damage of trees and other obstacles.
J. Round anti-scalp rollers.
standaRd on ViKinG™ 36" and metRo® 32" & 36" models. • 5.0" deck depth, adjusts providing flexibility for varying cutting heights. • Sealed, greaseless spindles require no maintenance year-round. • 5.40"-diameter cutter housing and 1.0"-diameter spindle tube. • (2) 7-gauge steel reinforcement rings at spindle mounting area.
A
B
C
D
G
E
I
H
J
F
1514
SERIES 1 &
2SE
RIE
S 1
& 2
seRies 1 stamped decK FeatuRes.standaRd on Quest e-seRies.
a. 4.0"-deck depth. 3-point suspension. Floating.
B. 42" unit - 2 blade, 13-gauge stamped steel.
50" unit - 3 blade, 12-gauge stamped steel
c. Rolled deck edges for additional strength.
d. 5.50"-diameter cutter housing with 17mm-diameter spindle shaft. Sealed, greaseless spindle bearings require no maintenance year-round.
e. 18,500 fpm blade tip speed.
F. Composite discharge chute reduces impact damage of trees and other obstacles.
G. Round anti-scalp rollers. H. Clean-out port.
standaRd on Quest® e-seRies and Quest s-seRies • 4.0" deck depth with top discharge design. • Top discharge design enhances bagging performance. • Sealed, greaseless spindles require no maintenance
year-round. • 5.50"-diameter cutter housing with 17mm-diameter
spindle shaft. • Easily removable for cleaning and service.
new FoR 2012seRies 2 FaBRicated decK FeatuRes.standaRd on Quest s-seRies.
a. 4.0"-deck depth. 3-point suspension. Floating.
B. 3 blade, 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded front bumper.
c. 5.50"-diameter cutter housing with 17mm-diameter spindle shaft. Sealed, greaseless spindle bearings require no maintenance year-round.
d. 18,500 fpm blade tip speed.
e. Composite discharge chute reduces impact damage of trees and other obstacles.
F. Round anti-scalp rollers.
G. Clean-out port.
A
B
C
D
E
F
HG
A
BF
CD
E
G
1716
SPIND
LE DESIG
N &
CO
NSTRU
CTIO
NSP
IND
LE D
ESIG
N &
CO
NST
RUC
TIO
NseRies 5 & ultRacut™ seRies 6 spindle FeatuResstandard on lazer z® ds-series & lazer z X-series.
a. 7.75"-diameter cast aluminum spindle housing.
B. Double-rowed, dual triple lip seal, high-speed ball bearing assemblies, non-greasable.
c. 30 mm spindle shaft diameter at bearing.
d. Splined blade driver eliminates self tightening from impacts.
e. Spindle nut minimizes moisture from entering the spindle internals, retains bearing clamp load when servicing drive pulley.
F. Completely serviceable.
ultRacut™ seRies 2, 3 & 4 spindle FeatuResstandard on turf tracer® X-series, turf tracer s-series, Viking™ and metro® models.
a. 5.40"-diameter cast aluminum spindle housing.
B. Dual-sealed, high-speed bearing assemblies, non-greasable.
c. 1.0" spindle shaft diameter at bearing.
d. Splined blade drive eliminates self tightening from impacts excludes Viking and Metro models.
e. Spindle cap minimizes moisture from entering the spindle internals.
F. Spindle cavity is filled with grease to reduce condensation and moisture ingestion.
A
B
F
E
D
C
A
B
F
E
D
C
1918
SPIND
LE DESIG
N &
CO
NSTRU
CTIO
NSP
IND
LE D
ESIG
N &
CO
NST
RUC
TIO
NultRacut™ seRies 3 & 4 spindle FeatuResstandard on lazer z® s-series, lazer z e-series, pioneer® s-series and Vantage® models.
a. 7.75"-diameter cast aluminum spindle housing.
B. Dual-sealed, high-speed bearing assemblies, non-greasable.
c. 25 mm spindle shaft diameter at bearing.
d. Splined blade driver eliminates self tightening from impacts.
e. Spindle cap minimizes moisture from entering the spindle internals.
F. Spindle cavity is vented to reduce condensation and moisture ingestion.
ultRacut™ seRies 2 spindle FeatuResstandard on pioneer e-series.
a. 7.50"-diameter cast aluminum spindle housing.
B. Dual-sealed, high-speed bearing assemblies, non-greasable.
c. 17mm diameter spindle shaft at bearing.
d. Hex blade driver eliminates self tightening from impacts.
A
B
D
C
A
B
F
E
D
C
2120
BLA
DE FIT A
PPLICA
TION
CH
AR
TBLA
DE
FIT
APP
LIC
ATI
ON
CH
AR
TMost mower blades utilize just the tips of each blade to cut grass. Exmark’s blades feature a much longer, sharpened cutting surface for an enhanced quality of cut throughout a wider range of mowing conditions.
High-Performance Blades Revolutionary Cutting Design
part number Blade type models size 32" 36" 42" 44" 48" 50" 52" 60"
103-6584 High Lift Notched Blade MG, VH 18.00" •
103-1578 High Lift Solid Blade MG, VH 18.00" •
103-6580 Low Lift Blade MG, VH 18.00" •
103-6582 Mulch Blade MG, VH 18.00" •
116-5176 eXtreme 2 Blade MG, VH 18.00" •
103-6583 High Lift Notched Blade MG, VH 16.25" • •
103-1577 High Lift Solid Blade MG, VH 16.25" • •
103-6738 Low Lift Blade MG, VH 16.25" • •
103-6581 Mulch Blade MG, VH 16.25" • •
116-5178 eXtreme 2 Blade MG, VH 16.25" • •
116-1037 High Lift Notched Blade PNS 22.25" •
116-1047 Mulch Blade PNS 22.25" •
103-6401 High Lift Notched Blade TTS, VT, PNE, PNS 16.25" •
103-6381 High Lift Solid Blade TTS, VT, PNE, PNS 16.25" •
103-6386 Low Lift Blade TTS, VT, PNE 16.25" •
103-6391 Mulch Blade TTS, VT, PNS 16.25" •
109-6389 Mulch Blade PNE 16.25" •
116-5177 eXtreme 2 Blade TTS, VT, PNE, PNS 16.25" •
103-6402 High Lift Notched Blade TTX, TTS, VT, PNE, PNS 18.00" • •
103-6382 High Lift Solid Blade TTX, TTS, VT, PNE, PNS 18.00" • •
103-6387 Low Lift Blade TTX, TTS, VT, PNE 18.00" • •
103-6392 Mulch Blade TTX, TTS, VT, PNS 18.00" • •
109-6390 Mulch Blade PNE 18.00" •
116-5175 eXtreme 2 Blade TTX, TTS, VT, PNE, PNS 18.00" • •
103-6403 High Lift Notched Blade TTX, PNS, VT 20.50" •
103-6383 High Lift Solid Blade TTX, PNS, VT 20.50" •
103-6388 Low Lift Blade TTX, PNS, VT 20.50" •
103-6393 Mulch Blade TTX, PNS, VT 20.50" •
116-5174 eXtreme 2 Blade TTX, PNS, VT 20.50" •
110-6568 Standard Blade QTE 21.60" •
106-2247 Low Lift Blade QTE 21.60" •
106-2247 Mulching Blade QTE 21.60" •
115-5059 Standard Blade QTE, QTS 17.50" •
115-5062 Low Lift Blade QTE, QTS 17.50" •
115-5062 Mulch Blade QTE, QTS 17.50" •
Exmark® eXtreme 2 blades feature a revolutionary design. The angle of the cutting teeth redirects the airflow for improved wear and vacuum lift characteristics. The clippings remain in contact with the blade longer, resulting in a finer cut and a beautifully manicured appearance.
2322
BLA
DE
FIT
APP
LIC
ATI
ON
CH
AR
T BLA
DE FIT A
PPLICA
TION
CH
AR
TBLA
DE
FIT
APP
LIC
ATI
ON
CH
AR
Tpart number Blade type models size 42" 48" 52" 60" 72"
103-4209 Left-Hand Blade NV 42 22.00" •
103-4210 Right-Hand Blade NV 42 22.00" •
103-9526 Left-Hand Mulch NV 42 22.00" •
103-9527 Right-Hand Mulch NV 42 22.00" •
103-4207 Left-Hand Blade NV 48 25.00" •
103-4208 Right-Hand Blade NV 48 25.00" •
103-9524 Left-Hand Mulch NV 48 25.00" •
103-9525 Right-Hand Mulch NV 48 25.00" •
103-6401 High Lift Notched Blade LZX, LZS, LZE 16.25" •
103-6381 High Lift Solid Blade LZX, LZS, LZE 16.25" •
103-6386 Low Lift Blade LZX, LZS, LZE 16.25" •
103-6391 Mulching Blade LZX, LZS, LZE 16.25" •
116-5177 eXtreme 2 Blade LZX, LZS, LZE 16.25" •
103-6402 High Lift Notched Blade LZX, LZS, LZE 18.00" •
103-6382 High Lift Solid Blade LZX, LZS, LZE 18.00" •
103-6387 Low Lift Blade LZX, LZS, LZE 18.00" •
103-6392 Mulching Blade LZX, LZS, LZE 18.00" •
116-5175 eXtreme 2 Blade LZX, LZS, LZE 18.00" •
103-6403 High Lift Notched Blade LZX, LZS, LZE 20.50" •
103-6383 High Lift Solid Blade LZX, LZS, LZE 20.50" •
103-6388 Low Lift Blade LZX, LZS, LZE 20.50" •
103-6393 Mulching Blade LZX, LZS, LZE 20.50" •
116-5174 eXtreme 2 Blade LZX, LZS, LZE 20.50" •
103-6404 High Lift Notched Blade LZX, LZS 24.50" •
103-6384 High Lift Solid Blade LZX, LZS 24.50" •
103-6389 Low Lift Blade LZX, LZS 24.50" •
103-6394 Mulching Blade LZX, LZS 24.50" •
116-5171 eXtreme 2 Blade LZX, LZS 24.50" •
109-6463 High Lift Notched Blade LZDS 20.75" •
109-6469 High Lift Solid Blade LZDS 20.75" •
103-8240 Low Lift Blade LZDS 20.75" •
109-5396 Mulching Blade LZDS 20.75" •
116-5499 eXtreme 2 Blade LZDS 20.75" •
109-6465 High Lift Notched Blade LZDS 24.75" •
109-6471 High Lift Solid Blade LZDS 24.75" •
103-9622 Low Lift Blade LZDS 24.75" •
109-5879 Mulching Blade LZDS 24.75" •
116-5501 eXtreme 2 Blade LZDS 24.75" •
2524
Equipment Cover - Large (Does not fit 72") ................ 116-1379Hitch Kit ......................................................................... 103-9565Jack ................................................................................ 116-1351Jack Receiver ................................................................. 116-1571Light Kit .......................................................................... 116-1154Mulching Kits .................................................. See Page 124-125Sun Shade ......................................................................116-0513Turf Striping Kit ...............................................See Page 106-107Trash Container, 2.5-gallon capacity ................................. TC26UltraVac® Collection Systems ........................ See Page 114-121
For more information on Accessories see page 94-125
LAZER
Z® D
S-SERIESLA
ZER
Z® D
S-SE
RIE
S modelnumber Height
width
engine size deck weight length defl. down defl. up price
LZDS902K6051 D902 Kubota® Diesel 60" Series 5 1602 lbs 84.5" 72.7" 72.8" 61.4" $
LZDS902K7251 D902 Kubota Diesel 72" Series 5 1702 lbs 88.7" 72.7" 85.8" 74.3" $
Acc
esso
ries
& A
ttac
hmen
ts
Key
Feat
ures
Key
Feat
uresLazer Z DS-Series available with a Kubota liquid-cooled diesel
engine.
Available with 60"& 72" Series 5 cutting decks.
desiGn-enGineeRed FoR tHe touGHest mowinG conditions:
• Newandimprovedenginecoolingsystemincreasesenginecooling efficiency and improves airflow through radiator in tough conditions.
• Newlyimprovedengineisolationsystem,forbettervibrationreduction.
• NewlydesignedautomaticPTOshutdownprovidesengineoverheat protection.
• Utilizeslarge-capacity,21ccHydro-Gear® variable displacement pumps with shaft-mounted cooling fans.
• High-torque wheel motors provide increased performance. • Heavy-duty tubular steel frame design for maximum durability.
additional FeatuRes include:
•Large26x12.0-12,4-plyMulti-Trac® drive tires for optimum traction and mower stability. •Large-diameter,13x6.50-6smooth-tread,semi-pneumatic, no-flat front caster tires for increased reliability and a smoother ride. •Adjustabledampersallowtheoperatortocustomizedrive responsiveness to suit personal preference. •Heavy-dutycanisterairfiltrationsystemimprovesenginelife, minimizes maintenance and boosts overall productivity. •Standardfull-suspensionseatwitharmrests. •Blade-tipspeedapproximately18,500fpm.
• TheDS-SeriesmodelsareB20biodiesel-readyforlower emissions and reduced environmental impact. See Page 132 foR exmaRk® waRRanty DetailS
1Units are carb-compliant.
2726
LAZER
Z® D
S-SERIESLA
ZER
Z® D
S-SE
RIE
S
Dec
ksEq
uipm
ent
Dec
ks
engine – D902 Kubota® 3-cylinder liquid-cooled diesel, governed to 3,850 rpm.air Filter – Heavy-duty canister air filtration system.drive system – Two Hydro-Gear® 21cc/rev pumps with integral SCR (System Check Relief) valves (in forward), powering two 18-cubic-inch wheel motors with 1.25" (3.18 cm) diameter tapered shafts.Hydro Fluid – Exmark Premium Hydro oil.speed – Infinitely variable speed selection from 0-12.0 mph (19.3 kmph) forward, 0-8.0 mph (12.9 kmph) reverse. pto engagement – MagStop electromagnetic 250-ft-lb clutch with spot brake. Fuel capacity – 15.5-gallons (58.7-L) twin fuel tanks.drive-wheel Release – Allows unit movement without engine running.safety package – Operator Presence Controls (OPC) and drive system interlock. Rollover protection system (Rops) – 2-post foldable ROPS standard with seat belt and latch.deck lift - Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.casters – 0.50" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. cup Holder – Standard.
style – Series 5 cutting deck. Side-discharge standard with option to bag or mulch.widths available – 60" and 72". deck construction – 10-gauge top that is formed and continuously seam-welded, with 10-gauge top reinforcement plate, 7-gauge side skirt and 7-gauge reinforcement rings at spindle assembly. 6.0"-deep deck, 4-point suspension, full-floating deck with 6 adjustable, cone-shaped, anti-scalp rollers.
cutting Height – 1.0" (2.5 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments and adjustable from operator’s seat.Blade spindles – No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75" diameter splinedblade driver and 1.18" diameter spindle shaft.Blade-tip speed – Approximately 18,500 fpm.
tractor Frame – Welded, heavy-duty tubular steel.steering and motion control – Hydraulically dampened twin levers, adjustable fore and aft. Adjustable dampers (3 positions) to customize drive responsiveness. Also adjustable to 2-height positions. Front caster tires – 13 x 6.50-6, smooth-tread, semi-pneumatic tires.drive tires – 26 x 12.0-12, 4-ply Multi-Trac.®
turning Radius – True zero-turn.parking Brake – Lever-actuated drum and band integrated with transmission-neutral interlock.seat – Deluxe, two-tone, bolstered, full-suspension seat with Elastomeric Vibration Control material. Adjusts to individual operator weight and features padded, height-adjustable armrests. Hinged mounting.electrical – 12-volt battery with 60-amp alternator.engine Hourmeter – Standard. Fuel Gauge – Standard.console storage compartment – Standard.
deck size
BLADES material is 0.20" thick alloy steel BELTS# of
BladesBlade
lengthnotched air Foil
solid air Foil low lift mulching*
eXtreme 2mulching
mule drive
Blade drive pump drive
60" 3 20.75" 109-6463 109-6469 103-8240 109-5396 116-5499 109-4199 1-633127 109-7582
72" 3 24.75" 109-6465 109-6471 103-9622 109-5879 116-5501 109-4199 1-643052 109-7582
*Requires installation of Micro-Mulch accessory for proper mulching
Drive Wheels Pneumatic Tire Assembly Semi-Pneumatic Tire Assembly
Rim only tire only complete Rim only tire only complete Rim only tire only complete
60" 109-3156 103-4963 109-3157 n/a 1-523009 103-5188 n/a n/a 109-9127
72" 109-3156 103-4963 109-3157 n/a 1-523009 103-5188 n/a n/a 109-9127
Pow
er C
ompo
nent
s
2928
LAZER
Z® X
-SERIESLA
ZER
Z® X
-SER
IES
modelnumber
width
engine size deck weight length Height defl. down defl. up price
LZX680KC486 CV680 Kohler® Command™ 48" UltraCut™ Series 6 1125 lbs 79.2" 70.5" 59.6" 51.8" $
LZX740KC526 CV740 Kohler Command 52" UltraCut Series 6 1116 lbs 79.2" 70.5" 64.8" 56.3" $
LZX740KC606 CV740 Kohler Command 60" UltraCut Series 6 1195 lbs 83.1" 70.5" 72.8" 56.3" $
LZX740KC606CA1 CV740 Kohler Command 60" UltraCut Series 6 1200 lbs 83.1" 70.5" 72.8" 56.3" $
LZX749EKC606 ECV749 Kohler Command EFI 60" UltraCut Series 6 1212 lbs 83.1" 70.5" 72.8" 62.5" $
LZX801KA606 FX801V Kawasaki® V-Twin 60" UltraCut Series 6 1212 lbs 83.1" 70.5" 72.8" 62.5" $
LZX801KA606SS2 FX801V Kawasaki® V-Twin 60" UltraCut Series 6 1212 lbs 83.1" 70.5" 72.8" 62.5" $
LZX940KC6062 CV940 Kohler Command 60" UltraCut Series 6 1260 lbs 83.1" 70.5" 72.8" 62.5" $
LZX980KC6061,2 CV980 Kohler Command 60" UltraCut Series 6 1244lbs 83.1" 70.5" 72.8" 62.5" $
LZX940KC7262 CV940 Kohler Command 72" UltraCut Series 6 1292 lbs 86.1" 70.5" 84.9" 73.5" $
LZX980KC7261,2 CV980 Kohler Command 72" UltraCut Series 6 1276 lbs 86.1" 70.5" 84.9" 73.5" $
3-Bushel Bagger .......................................................GC360212 Volt Adapter .......................................................109-9694Extended Driver Lever Kit.......................................116-1065Equipment Cover - Large (Does not fit 72") .......... 116-1379Jack .......................................................................... 116-1351Jack Receiver ...........................................................116-1049Hitch Kit .................................................................. 109-9487Hydro Maintenance Kit ...........................................116-3270Light Kit .................................................................... 116-1154 Mulching Kits ............................................ See Page 124-125Operator Controlled Discharge................................ OCD02Power Deck Lift ....................................................... 116-2517Rear Anti-Scalp Kit - Fits 72" ................................. 116-4607Rear Anti-Scalp Kit - Fits 60" ..................................116-4614Sun Shade ................................................................116-0513Trash Container, 2.5-gallon capacity ...........................TC26Turf Striping Kit ........................................See Page 106-107UltraVac® Collection Systems ................. See Page 114-121operator comfort ............................... Also Refer To 98-99Standard Seat ..........................................................116-4474Custom Ride Seat Suspension ............................... 116-0062Full-Suspension Seat ...............................................116-7234
For more information on Accessories see page 94-125
Acc
esso
ries
& A
ttac
hmen
ts
•Heavy-dutycanisterairfiltrationsystemthatimprovesengine life, simplifies maintenance and boosts overall productivity. •Deluxe,two-tone,bolsteredseatwithElastomeric Vibration Control (EVC) material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion. Suspension seat standard on LZX801KA606SS, LZX940KC606, LZX940KC726, LZX980KC606 and LZX980KC726. •High-capacity,12-gallon,singlefueltankwithsinglefill location to reduce your time at the gas pump. •Noroutinegreasepoints.Only4annual
grease points. See Page 132 foR exmaRk®
waRRanty DetailS
Key
Feat
ures
Key
Feat
ures
1Units are carb-compliant 2Standard Full-Suspension Seat
Powered by Kohler Command, Kohler Command Electronic Fuel Injection, or Kawasaki V-Twin engines.Available with 48," 52," 60" & 72" full-floating UltraCut Series 6 cutting decks.additional FeatuRes include:
•Exmark exclusive Parker unitized 12 cc (48" & 52") and 16cc (60" & 72" ) pump and wheel motor system with no hoses, integrated cooling fans, and 1.7-quart integrated reservoir for improved performance and reduced maintenance. •24x9.5-12,4-plyMulti-Trac® drive tires on 48" and 52" units and 24 x 12.0-12, 4-ply Multi-Trac drive tires on 60" and 72" units for optimum traction. •Large-diameter13x5.0-6smooth-tread,semi-pneumatic, no-flat front caster tires on 48" and 52" units and 13 x 6.5-6 smooth-tread, semi-pneumatic, no-flat, front caster tires on 60" and 72" units for increased reliability. •Welded,heavy-duty1.5"x3"tubularsteelunibodyfor increased durability.
3130
engine – CV680, CV740, CV940 & CV980 Kohler® Command™; ECV740 Kohler Command EFI; and FX801V Kawasaki® engines. All engines governed to 3,750 rpm.air Filter – Heavy-duty canister air filtration system.drive system – Two Exmark® exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors on 60" & 72" models. 12 cc pumps and 14.5 cubic inch motors on 48" & 52" models.Hydro Fluid – Exmark Premium Hydro oil.speed – Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse on 60" & 72" models. 0–10.0 mph (16.0 kmph) forward, 0–6.0 mph (9.7 kmph) reverse on 48" & 52" models.pto engagement – MagStop Electromagnetic 200-ft-lbs clutch with spot brake except CV940 & CV980 have 250-ft-lbs.Fuel capacity – High-capacity, 12-gallon (45.4-L), single fuel tank with single fill location.drive-wheel Release – Allows unit movement without engine running.safety package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.Rollover protection system (Rops) – 2-post foldable ROPS standard with seat belt and latch.Quick deck lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.casters – .50" thick caster yoke arm..cup Holder – Standard.
style – Full-floating UltraCut™ Series 6 featuring a heavy-duty spindle. Side-discharge standard with the option to bag or mulch.widths available – 48", 52", 60," and 72."
Power Components LAZER
Z® X
-SERIESLA
ZER
Z® X
-SER
IES deck
size
BLADES material is 0.20" thick alloy steel BELTS# of
BladesBlade
lengthnotched air Foil
solid air Foil low lift mulching*
eXtreme 2mulching
Hydraulic drive
Blade drive
48" 3 16.25" 103-6401 103-6381 103-6386 103-6391 116-5177 109-3388 109-807052" 3 18.00" 103-6402 103-6382 103-6387 103-6392 116-5175 109-3388 109-499460" 3 20.50" 103-6403 103-6383 103-6388 103-6393 116-5174 109-3388 109-807372" 3 24.50" 103-6404 103-6384 103-6389 103-6394 116-5171 109-3388 109-9023
*Requires installation of Micro-Mulch accessory for proper mulching
Drive Wheels Semi-Pneumatic Tire AssemblyRim only tire only complete Rim only tire only complete
48" 109-3645 103-2771 109-3050 n/a n/a 109-912652" 109-2875 103-2771 109-3247 n/a n/a 109-912660" 109-2871 103-2744 109-3248 n/a n/a 109-912772" 109-3156 103-2744 109-3158 n/a n/a 109-9127
deck construction –10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting reinforcements for improved strength and reduced weight. 4-point suspension, full floating deck. 72" unit has 6 adjustable, cone-shaped, anti-scalp rollers. 60" unit has 4 adjustable, cone-shaped, anti-scalp rollers. 48" and 52" units have 3 adjustable, cone-shaped, anti-scalp rollers.cutting Height – 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. Blade spindles – No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver and 30mm (1.18") diameter spindle shaft.Blade-tip speed – Approximately 18,500 fpm.
tractor Frame – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.steering and motion control – Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampers (3-positions) to customize drive responsiveness. Also adjustable to 2-height positions.Front caster tires – 13 x 6.5-6 smooth tread, semi-pneumatic tires on 60" & 72" models; 13 x 5.0-6 smooth tread, semi-pneumatic tires on 48" & 52".drive tires – 24 x 9.5-12, 4-ply Multi-Trac® on 48" and 52" models. 24 x 12.0-12, 4-ply Multi-Trac on 60" & 72" models; turning Radius – True zero-turn.parking Brake – Lever-actuated disc brake.seat – Deluxe, two-tone, bolstered seat (LZX801KA606SS, 940's and 980's have a full-suspension seat) with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. diagnostics – Operational diagnostics with integral fuel gauge. EFI unit has malfunction indication light (MIL).electrical – 12-volt battery with 15-amp alternator (EFI has 20-amp).engine Hourmeter – Standard.
Pow
er C
ompo
nent
s
Dec
ksEq
uipm
ent
Dec
ks
3332
LAZER
Z® S-SER
IESLAZE
R Z
® S
-SER
IES
modelnumber
width
engine size deck weight length Height defl. down defl. up price
LZS651KA484 FX651V Kawasaki® V-Twin 48" UltraCut™ Series 4 1089 lbs 79.2" 70.0" 59.6" 51.8" $LZS651KA484CA1 FX651V Kawasaki V-Twin 48" UltraCut Series 4 1089 lbs 79.2" 70.0" 59.6" 51.8" $LZS680KC524 CV680 Kohler® Command™ 52" UltraCut Series 4 1088 lbs 79.2" 70.0" 64.8" 56.3" $LZS691KA524CA1 FX691V Kawasaki V-Twin 52" UltraCut Series 4 1088 lbs 79.2" 70.0" 64.8" 56.3" $LZS740KC524 CV740 Kohler Command 52" UltraCut Series 4 1088 lbs 79.2" 70.0" 64.8" 56.3" $LZS730EKC604 ECV730 Kohler Command EFI 60" UltraCut Series 4 1133 lbs 83.1" 70.0" 72.8" 62.5" $LZS740KC604 CV740 Kohler Command 60" UltraCut Series 4 1133 lbs 83.1" 70.0" 72.8" 62.5" $LZS740KC604CA1 CV740 Kohler Command 60" UltraCut Series 4 1133 lb 83.1" 70.0" 72.8" 62.5" $LZS801PKA6041 FX801V Kawasaki Propane 60" UltraCut Series 4 1316 lbs 83.1" 70.0" 72.8" 62.5" $LZS749EKC7241 EVC749 Kohler Command EFI 72" UltraCut Series 4 1208 lbs 86.1" 70.0" 84.9" 73.5" $LZS801KA724 FX801V Kawasaki V-Twin 72" UltraCut Series 4 1208 lbs 86.1" 70.0" 84.9" 73.5" $LZS801PKA7241 FX801V Kawasaki Propane 72" UltraCut Series 4 1403 lbs 86.1" 70.0" 84.9" 73.5" $
Powered by Kawasaki V-Twin, Kohler Command, Kohler Command Electronic Fuel Injection, and Kawasaki V-Twin with propane conversion.
Available with 48," 52," 60" & 72" full-floating UltraCut™ Series 4 cutting decks.
additional FeatuRes include:
•Exmark® exclusive Parker unitized 12 cc pump and wheel motor system with no hoses, integrated cooling fans, and 1.7-quart integrated reservoir for improved performance and reduced maintenance. •Welded,heavy-duty1.5"x3"tubularsteelunibodyfor increased durability. •23x9.5-12TurfMaster® drive tires (48" & 52") and 24 x 12.0-12 Turf Master drive tires (60" & 72") units for optimum traction. 3-Bushel Bagger ...................................................... GC3602
12 Volt Adapter ...................................................... 109-9694Extended Driver Lever ............................................116-1065Equipment Cover - Large (Does not fit 72") ..........116-1379Hitch Kit ..................................................................109-9487Hydro Maintenance Kit .......................................... 116-3270Jack ..........................................................................116-1351 Jack Receiver .......................................................... 116-1049Light Kit ....................................................................116-1154Mulching Kits ............................................See Page 124-125Operator Controlled Discharge ...............................OCD02Power Deck Lift .......................................................116-2517Rear Anti-Scalp Kit - Fits 72" .................................116-4607Rear Anti-Scalp Kit - Fits 60" ................................. 116-4614Sun Shade ............................................................... 116-0513Trash Container, 2.5-gallon capacity ...........................TC26 Turf Striping Kit ....................................... See Page 106-107UltraVac® Collection Systems ..................See Page 114-121operator comfort ............................... Also Refer To 98-99Standard Seat ......................................................... 116-4474Custom Ride Seat Suspension ...............................116-0062Full-Suspension Seat .............................................. 116-7234Tilt Frame & 3D Isolation System Kit .................... 116-0941
For more information on Accessories see page 94-125
•13x5.0-6smoothtread,semi-pneumaticfrontcastertires (48," 52" & 60") and 13 x 6.5-6 smooth-tread, semi-pneumatic front caster tires (72" & LZS740KC604) for increased reliability. •Heavy-dutycanisterairfiltrationsystemthatimprovesengine life, simplifies maintenance and boosts overall productivity. •High-capacity,12-gallon,singlefueltankwithsinglefill location to reduce your time at the gas pump. 8-gallon, single fuel tank with single fill location on LZS740KC604. •High-back, two-tone, bolstered seat with Elastomeric Vibration Control (EVC) material. •Noroutinegreasepoints.Only4annualgreasepoints.
See Page 132 foR exmaRk® waRRanty DetailS
Acc
esso
ries
& A
ttac
hmen
ts
Key
Feat
ures
Key
Feat
ures
1Units are carb-compliant.
3534
engines – FX651V, FX691V, FX801V Kawasaki®; FX801V Kawasaki with propane conversion; CV680 & CV740 Kohler®
Command,™ ECV730 &ECV749 Kohler Command EFI engines. All engines are governed to 3,750 rpm.air Filter – Heavy-duty canister air filtration system.drive system – Two Exmark® exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components.12 cc pumps and 14. 5 cubic inch motors (48" & 52").12 cc pumps and 14. 5 cubic inch motors with integrated shock valve (60" & 72").Hydro Fluid – Exmark Premium Hydro oil.speed – Infinitely variable speed selection from 0–10.0 mph (16.0 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.pto engagement – MagStop electromagnetic 200-ft-lbs clutch with spot brake.Fuel capacity – High-capacity, 12-gallon (45.4-L), single fuel tank with single fill location (except LZS730EKC604 has an 8-gallon (30.3-L)). Propane model has 43.5 lb (10.3 gallon) propane tank.drive-wheel Release – Allows unit movement without engine running.safety package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.Rollover protection system (Rops) – 2-post foldable ROPS standard with seat belt and latch.Quick deck lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.casters – .50" thick caster yoke arm.cup Holder – Standard.
LAZER
Z® S-SER
IESLAZE
R Z
® S
-SER
IES deck
size
BLADES material is 0.20" thick alloy steel BELTS# of
BladesBlade
lengthnotched air Foil
solid air Foil low lift mulching*
eXtreme 2mulching
Hydraulic drive
Blade drive
48" 3 16.25" 103-6401 103-6381 103-6386 103-6391 116-5177 109-3388 109-807052" 3 18.00" 103-6402 103-6382 103-6387 103-6392 116-5175 109-3388 109-499460" 3 20.50" 103-6403 103-6383 103-6388 103-6393 116-5174 109-3388 109-807372" 3 24.50" 103-6404 103-6384 103-6389 103-6394 116-5171 109-3388 109-9023
*Requires installation of Micro-Mulch accessory for proper mulching
Drive Wheels Pneumatic Tire Assembly2 Semi-Pneumatic Tire Assembly1
Rim only tire only complete Rim only tire only complete Rim only tire only complete
48" 109-3645 1-653160 115-3590 n/a 1-633002 103-5189 n/a n/a 109-912652" 109-2875 1-653160 115-3589 n/a 1-633002 103-5189 n/a n/a 109-912660" 109-2871 1-633993 115-3588 n/a 1-633002 103-5189 n/a n/a 109-91263
72" 109-3156 1-633993 109-8972 n/a 1-523009 103-5188 n/a n/a 109-9127
Pow
er C
ompo
nent
s
Dec
ksEq
uipm
ent
style – Full-floating UltraCut™ Series 4. Side-discharge standard with the option to bag or mulch.widths available – 48," 52," 60" and 72." deck construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. 4-point suspension, full-floating deck with 3 adjustable anti-scalp rollers on 48" & 52". 4 adjustable anti-scalp rollers on 60"; 6 adjustable anti-scalp rollers on 72".cutting Height – 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. Blade spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm- (.98") diameter spindle shaft and splined blade driver.Blade-tip speed – Approximately 18,500 fpm.
tractor Frame – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.steering and motion control – Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampers (3-positions) to customize drive responsiveness. Also adjustable to 2-height positions.Front caster tires – 13 x 5.0-6; smooth-tread, semi-pneumatic on 48," 52" & 60" units, 13 x 6.5-6; smooth-tread, semi-pneumatic on 72" and LZS740KC604.drive tires – 23 x 9.5-12, Turf Master® (48" & 52"). 24 x 12.0-12, Turf Master (60" & 72").turning Radius – True zero-turn.parking Brake – Lever-actuated disc brake.seat – Deluxe, two-tone, bolstered seat with Elastomeric Vibration Control material.diagnostics – Operational diagnostics with integral fuel gauge. EFI unit has malfunction indication light (MIL). electrical – 12-volt battery with 15-amp alternator. (EFI has 20)engine Hourmeter – Standard.
1 standard 2 optional 3 LZS740KC604 uses 109-9127
3736
Powered by Kawasaki V-Twin, or Kohler Command engines.
Available with 48," 52" & 60" full-floating UltraCut Series 4 cutting decks.
additional FeatuRes include:
•Compact,heavy-dutyunibodyframewithstandard rear-sloping, easily foldable ROPS •Seatpositionoptimizedforcomfortandimproved center of gravity. •Exmark® exclusive Parker unitized 12 cc pump and wheel motor system with no hoses. •12x5.0-6smoothtread,pneumatic,frontcastertires for increased reliability. 60" unit has 13 x 5.0-6, smooth tread, pneumatic.
3-Bushel Bagger ......................................................GC360212 Volt Adapter.......................................................109-9694Rear Anti-Scalp Kit - Fits 60" .................................116-4614Equipment Cover - Large ....................................... 116-1379Extended Drive Lever ............................................116-1065Hitch Kit ................................................................. 109-9487Hydro Maintenance Kit ..........................................116-3282Jack ......................................................................... 116-1351Jack Receiver ..........................................................116-5701Light Kit ................................................................... 116-1154Mulching Kits ........................................... See Page 124-125Operator Controlled Discharge ............................... OCD02Power Deck Lift....................................................... 116-2517Sun Shade ...............................................................116-0513Trash Container, 2.5-gallon capacity ........................... TC26 Turf Striping Kit .......................................See Page 106-107UltraVac® Collection Systems ................. See Page 114-121Standard Seat .........................................................116-4474Full-Suspension Seat ..............................................116-7234Tilt Frame & 3D Isolation System Kit .....................116-0941
For more information on Accessories see page 94-125
LAZER
Z® E-SER
IESLAZE
R Z
® E
-SER
IES
modelnumber
width
engine size deck weight length Height defl. down defl. up price
LZE600KA484 FX600V Kawasaki® V-Twin 48" UltraCut™ Series 4 1035 lbs 79.2" 69.5" 59.6" 51.8" $
LZE691KA524 FX691V Kawasaki V-Twin 52" UltraCut Series 4 1070 lbs 79.2" 69.5" 64.8" 56.3" $
LZE740KC604 CV740 Kohler® Command™ 60" UltraCut Series 4 1105 lbs 83.1" 69.5" 72.8" 62.5" $
Acc
esso
ries
& A
ttac
hmen
ts
•Welded,heavy-duty1.5"x3"tubularsteelunibodyfor increased durability. •Heavy-dutycanisterairfiltrationsystemimprovesenginelife, simplifies maintenance and boosts overall productivity. •High-capacity,8-gallon,singlefueltankwithsinglefill location to reduce your time at the gas pump. •Noroutinegreasepoints.Only4annualgreasepoints. See Page 132 foR exmaRk® waRRanty DetailS
Key
Feat
ures
Key
Feat
ures
3938
Power Components LAZER
Z® E-SER
IESLAZE
R Z
® E
-SER
IES deck
size
BLADES material is 0.20" thick alloy steel BELTS# of
BladesBlade
lengthnotched air Foil
solid air Foil low lift mulching*
eXtreme 2mulching
pumpdrive
Blade drive
48" 3 16.25" 103-6401 103-6381 103-6386 103-6391 116-5177 116-1953 116-1965
52" 3 18.00" 103-6402 103-6382 103-6387 103-6392 116-5175 116-1953 116-1966
60" 3 20.50" 103-6403 103-6383 103-6388 103-6393 116-5174 116-1953 109-8073
*Requires installation of Micro-Mulch accessory for proper mulching
Drive Wheels Pneumatic Tire AssemblyRim only tire only complete Rim only tire only complete
48" 109-3645 116-1948 116-1940 n/a 116-1952 116-1949
52" 109-2875 116-1948 116-1941 n/a 116-1952 116-1949
60" 109-2871 116-3139 116-3138 n/a 1-633002 103-5189
Equi
pmen
tD
ecks
engines – FX600V & FX691V Kawasaki® V-Twin and CV740 Kohler®
Command™ engines. All engines are governed to 3,750 rpm.air Filter – Heavy-duty canister air cleaner.drive system – Two Exmark® exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components.Hydro Fluid – Exmark Premium Hydro oil.12cc pumps and 14.5 cubic inch motors.speed – Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.pto engagement – MagStop Electromagnetic 175 ft-lbs clutch with spot brake on 48" and 52" models. MagStop electromagnetic 200-ft-lbs clutch with spot brake on 60" models. Fuel capacity – 8-gallon (30.3-L), single fuel tank with single fill location.drive-wheel Release – Allows unit movement without engine running.safety package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.Rollover protection system (Rops) – 2-post foldable ROPS standard with seat belt and latch.Quick deck lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.casters – .50" thick caster yoke arm.cup Holder – Standard.
style – Full-floating UltraCut™ Series 4. Side-discharge standard with the option to bag or mulch.widths available – 48," 52" and 60." deck construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. 4-point suspension, full-floating deck with 3 adjustable, anti-scalp rollers on 48" & 52" models. 4 adjustable, anti-scalp rollers on 60" model.cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. Blade spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm (.98") -diameter spindle shaft and splined blade driver.Blade-tip speed – Approximately 18,500 fpm.
tractor Frame – Unibody, welded, heavy-duty 1.5" x 3" tubular steel.steering and motion control – Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampers (3-positions) to customize drive responsiveness. Also adjustable to 2-height positions.Front caster tires – 12 x 5.0-6, smooth-tread, pneumatic on 48" & 52" unit. 13 x 5.0-6 on 60" unit.drive tires – 22 x 9.5-12 Turf Master® drive tires on 48" and 52" models. 23 x 10-5-12 Turf Master drive tires on 60" model.turning Radius – True zero-turn.parking Brake – Lever-actuated disc brake.seat – Commercial-grade high-back contoured foam padded with armrests. Adjusts fore and aft from operator's position.diagnostics – Operational diagnostics with integral fuel gauge.electrical – 12-volt battery with 15-amp alternator.engine Hourmeter – Standard.
Pow
er C
ompo
nent
s
4140
NA
VIG
ATO
R®N
AV
IGA
TOR
®modelnumber engine weight length Height width price
NV640KC1 CV640 Kohler® Command™ 845 lbs 67.3" 51.2" 42.6" $
NV730EKC1 ECV730 Kohler Command EFI 850 lbs 67.3" 51.2" 42.6" $
NV740KC1 CV740 Kohler Command 850 lbs 67.3" 51.2" 42.6" $
decks size deck length Height width
CD42CD 42" Center Discharge 295lbs 37.2" 13.1" 43.2" $
CD48CD 48" Center Discharge 325 lbs 39.9" 13.1" 49.2" $
Acc
esso
ries
& A
ttac
hmen
ts
Key
Feat
ures Powered by Kohler Command, or Kohler Command Electronic
Fuel Injection engines.
Available with 42" and 48" cutting decks.
Full-floating, 4 5/8"-deep deck that traces the precise contours of the turf for a flawless cut.
Rear-discharge deck design with two-sided trimming enables the operator to effectively control discharge around landscape areas that include flowers, mulch beds and walkways.
Integrated collection system combines precision cutting performance with advanced dedicated bagger technology.
additional FeatuRes include:
• Large-capacity, 9.5-bushel (76 gallons) hopper is standard. • Larger-diameter (5" x 11") blower generates enhanced airflow for optimum vacuuming performance and debris collection.
Dual Semi-Pneumatic Rear Casters ............................... 103-9005Narrow Drive Tire Kit (pair) 18 x 8.5-10 ......................... 103-9007Mulching Kit ................................................. Also refer to 124-125 42" deck ....................................................................MKNAV42 48" deck ....................................................................MKNAV48Light Kit ............................................................................NAVLKITFill Reduction Kit for models below S/N 670,000 ........... 109-5458Automatic Door Kit ......................................................... 109-5459Removable Dump Tub Kit ............................................... 116-1429
Front-mount attachmentsQuick Hitch Attachment System ..........................NAVSUBFRM0144" Snow Blower (requires NAVSUBFRM01) .............. NAVSBLWR4448" Snow Blade (requires NAVSUBFRM01) ................... NAVSBLD48
For more information on Accessories see page 94-125
• Fill Reduction provides the versatility to: – 100% bag – Closed 50% mulch / 50% bag – 100% mulch (requires optional mulch kit) • The exclusive "FeatherTouch" Control System provides effortless handling. • Comfortable, ergonomic positioning of the controls minimizes fatigue. • Seat with Elastomeric Vibration Control material for improved operator comfort.
See Page 132 foR exmaRk® waRRanty DetailSKe
y Fe
atur
es
1Units are carb-compliant.
4342
Power ComponentsN
AV
IGA
TOR
®NA
VIG
ATO
R® deck
size
BLADES - material is 0.164" thick BELTS
# of Blades
Blade length
standardlH
standard RH
mulching lH*
mulchingRH*
Blade driver
Blade Bolt shear pin
pto/Blower drive1
Hydro pump drive
42" 2 22.00" 103-4209 103-4210 103-9526 103-9527 103-7705 92-5816 99-0283 103-6767 103-4244
48" 2 25.00" 103-4207 103-4208 103-9524 103-9525 103-7705 92-5816 99-0283 103-6767 103-4244
42" has 3.5" air foil. 48" has 5.5" air foil. *Requires installation of Micro-Mulch accessory for proper mulching3 1matched set
Drive Wheels Front caster wheels
Rear caster wheelsRim only tire only complete
18 x 8.5-10 18 x 10.5-10Optional
18 x 8.5-10Standard
18 x 10.5-10Optional
18 x 8.5-10Standard
18 x 10.5-10 complete 13 x 8.0-62 13 x5.0-63
42" 103-4318 103-4320 105-1945 103-4321 103-4319 103-9495 103-9494 103-3785
48" 103-4318 103-4320 105-1945 103-4321 103-4319 103-9495 103-9494 103-37852semi-pneumatic tire assembly w/axle 3semi-pneumatic tire assembly dual tires
engine – CV640 & CV740 Kohler® Command™; ECV730 Kohler Command EFI engines. All engines are governed to 3,600 rpm.air cleaner – Heavy-duty canister air filtration.drive system – Dual Hydro-Gear® 12 cc variable displacement pumps power Hydro-Gear Planetary Reduction motors.Hydro Fluid – Exmark Premium Hydro oil.speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–5.5 mph (8.9 kmph) reverse.Fuel capacity – 7.5-gallon (28.4-L), pivoting tank for easier engine service.drive-wheel Release – Allows movement without engine running.safety package – Operator Presence Controls (OPC) and drive system interlock.
style – Full-floating, center-discharge cutting deck with heavy-duty gear-driven spindle assembly. Patented Fill Reduction baffles standard.widths available – 42" and 48." deck construction – 7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports.cutting Height – 1.0" (2.5 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments.Blade drive – 1" Austempered spindle shaft with shear-pin protection at the blades.Blade-tip speed – Approximately 18,500 fpm.
Pow
er C
ompo
nent
sD
ecks
tractor Frame – Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0," strategically located, continuous force counterweight springs.steering and motion control – "FeatherTouch" hand-control drive levers, low-force constant speed lever.Front caster tires – 8 x 3.0-4 semi-pneumatic.Rear caster tire – 13 x 8.0-6 semi-pneumatic.drive tires – 18 x 10.5-10 Multi-Trac® C/S.turning Radius – Zero-turn.electrical – 12-volt battery with 15-amp alternator. EFI unit has 20-amp alternator.pto engagement – Clutching belt with 6" brake band.Gearbox design – Heavy-duty cast iron. Three independently sealed high-capacity gearboxes with spiral bevel-cut gears for quiet operation.Blower – 5.0" x 11" x 1/4" housing with reinforced high-wear areas and a three-blade abrasion-resistant impeller.Grass catcher capacity – Rear tapered 9.5-bushel (76-gallon) capacity.diffuser – Fixed mechanical with Exmark® exclusive debris manager.Fill indicator – Audible alarm.Ground clearance – 4" from base of tractor frame.parking Brake – Wet disc, internal in wheel motor.seat – High-back, "EVC" (Elastomeric Vibration Control) seat, which has no springs to break. Hour meter – Standard.
Equi
pmen
t
4544
Powered by Kawasaki V-Twin, or Kohler Command engines.
Available with 44," 48," & 52" UltraCut Series 3 and 60" UltraCut Series 4 cutting decks.
additional FeatuRes include:
• Patentedcutting-deckdesignyieldsprofessional results and the 5.0"-deep deck on 44," 48" & 52", and a 5.5"-deep deck on the 60" unit improves cutting efficiency. • Groundspeedof0– 8.0 mph forward; 0 – 5.0 mph reverse, increases productivity. 60" unit has speed of 0 – 9.0 mph forward; 0 – 6.0 mph reverse. • 22x9.5-12Kendadrivetiresmaximizestraction.60"unit
has 23 x 10.5-12 Kenda drive tires. • Seatpositionoptimizedforcomfortandimproved center of gravity.
UltraVac E-Series (2-Bag Powered Collection System) ...116-30013-Bushel Bagger ............................................................. GC3602Anti-Scalp Roller Kit - Fits 60" ......................................116-4614Equipment Cover - Large ............................................. 116-1379Full Suspension Seat .....................................................116-4678Hitch Kit......................................................................... 109-6245Jack ................................................................................. 116-1351Jack Receiver ................................................................. 116-1571Light Kit .......................................................................... 116-1154Mulching Kits .................................................. See Page 124-125Turf Striping Kit..............................................................116-5297Sun Shade ......................................................................116-0513Trash Container, 2.5-gallon capacity ................................. TC26
For more information on Accessories see page 94-125
PION
EER® S-SER
IESPIO
NEE
R® S
-SER
IES
modelnumber
width
engine size deck weight length Height defl. down defl. up price
PNS600KA443FX600V Kawasaki® V-Twin
44" UltraCut™ Series 3 822 lbs 78.8" 71.3" 56.4" 48.2" $
PNS651KA483FX651V Kawasaki
V-Twin48" UltraCut Series 3 862 lbs 77.8" 71.3" 59.5" 50.7" $
PNS680KC523 CV680 Kohler® Command™ 52" UltraCut Series 3 873 lbs 77.8" 71.3" 64.3" 54.2" $
PNS740KC604CV740 Kohler Command
60" UltraCut Series 4 948 lbs 78.8" 71.3" 72.8" 61.4" $
Acc
esso
ries
& A
ttac
hmen
ts
Key
Feat
ures • HydroGearZT3100hydrostaticdrivesystemon44,"48"&
52" units and HydroGear ZT3400 hydrostatic drive system on 60" unit, with charge pumps, steel cut gears and shock valves that delivers a smooth drive experience and years of reliable service.
• Foot-operatedQuickHeightAdjustSystemallowsfastandeasy height adjustments.
• Anti-scalprollersallowthedecktotracethecontouroftheterrain, which helps prevent turf scalping.
• Rear-slopingfoldableROPSstandard. • Heavy-dutycanisterairfiltrationsystemthatimproves
engine life, simplifies maintenance and boosts overall productivity.
• 4-ply13x5frontcasterwheelsforincreaseddurability with heavy-duty axles and bearings
• Large7-gallon,singlefueltankwithsinglefilllocationtoreduce your time at the gas pump.
• Spring-supportedseatforoperatorcomfort. See Page 132 foR exmaRk® waRRanty DetailS
Key
Feat
ures
4746
Power Components PION
EER® S-SER
IESPIO
NEE
R® S
-SER
IES deck
size
BLADES material is 0.20" thick alloy steel BELTS# of
BladesBlade
lengthnotched air Foil
solid air Foil low lift mulching*
eXtreme 2mulching
pumpdrive
Blade drive
44" 2 22.25" 116-1037 n/a n/a 116-1047 116-5606 115-9613 1-413093
48" 3 16.25" 103-6401 103-6381 103-6386 103-6391 116-5177 115-9613 116-3455
52" 3 18.00" 103-6402 103-6382 103-6387 103-6390 116-5175 115-9613 103-9273
60" 3 20.50" 103-6403 103-6383 103-6388 103-6393 116-5174 115-9613 114-8154
Drive Wheels Pneumatic Tire Assembly
Rim only tire only complete Rim only tire only complete
44" 116-6320 120-3271 116-6318 n/a 1-633002 103-5189
48" 116-6320 120-3271 116-6318 n/a 1-633002 103-5189
52" 116-6320 120-3271 116-6318 n/a 1-633002 103-5189
60" 120-3272 120-3269 119-2685 n/a 1-633002 103-5189
Pow
er C
ompo
nent
s
engines – FX600V & FX651V Kawasaki®; CV680 & CV740 Kohler® Command™ engines. All engines are governed to 3,750 rpm.air Filter – Heavy-duty canister air filtration system.drive system – Dual Hydro-Gear® ZT3100, hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spind-on filter and heavy-duty components. 60" model uses Hydro-Gear ZT3400.Hydro Fluid – Exmark Premium Hydro oil.speed – Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.0 kmph) reverse on 44," 48" & 52" models. Infinitely variable speed selection from 0–9.0 mph (14.5 kmph) forward, 0–6.0 mph (9.7 kmph) reverse on 60" model.pto engagement – MagStop electromagnetic 175-ft-lb clutch on 44," 48" & 52" models. MagStop electromagnetic 200-ft-lb clutch on 60" unit.Fuel capacity – 7-gallon (26.5-L) single fuel tank.drive-wheel Release – Standard - allows unit movement without engine running.safety package – Operator Presence Controls (OPC) and drive system interlock.Rollover protection system (Rops) – 2-post foldable ROPS standard with seat belt and latch.deck lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.casters – 0.38"-thick caster yoke arms.cup Holder – Standard.
style – Full-floating 5.0"-deep UltraCut Series 3 on 44," 48" & 52" models. Full-floating 5.5"-deep UltraCut Series 4 on 60" model. All models have side discharge standard with option to bag or mulch.widths available – 44," 48," 52" and 60." deck construction – 10-gauge top that is formed and continuously seam welded and 7-gauge side skirt. 7-gauge spindle mounting on 60" model. 4-point suspension, full-floating deck with 3 adjustable, anti-scalp rollers on 44," 48" & 52" models. 4 adjustable, anti-scalp rollers on 60" model.cutting Height – 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.6 cm) increments adjustable from operator position.Blade spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 25mm-diameter spindle shaft and splined blade driver.Blade-tip speed – Approximately 18,500 fpm.
tractor Frame – Unibody, welded, heavy-duty 2" square tublar steel.steering and motion control – Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 3 height positions.Front caster tires – 13 x 5.0-6, smooth tread, pneumatic.drive tires – 22 x 9.5-12 Kenda tires on 44," 48" & 52" models. 23 x 10.5-12 Kenda tires on 60" model.turning Radius – True zero-turn.parking Brake – Lever-actuated pawl break. seat – Commercial-grade high-back contoured foam padded with armrests. Hinged mounting with spring suspension. Adjustment is fore and aft from operator's position.electrical – 12-volt battery with 15-amp alternator.engine Hourmeter – Standard.
Dec
ksEq
uipm
ent
*Requires installation of Micro-Mulch accessory for proper mulching
4948
2-Bag Collection System ............................................. 116-5000Equipment Cover - Large ............................................. 116-1379Full-Suspension Seat .....................................................116-4678Hitch Kit ........................................................................ 109-6245Jack................................................................................. 116-1351Jack Receiver ................................................................. 116-1571Light Kit .......................................................................... 116-1154Mulching Kits ............................................. Also refer to 124-12548" High Lift Bagger Blade ......................................... 109-639152" High Lift Bagger Blade ......................................... 109-6392Sun Shade ......................................................................116-0513Trash Container ................................................................... TC26
For more information on Accessories see page 94-125
PION
EER® E-SER
IESPIO
NEE
R® E
-SER
IES
modelnumber
width
engine size deck weight length Height defl. down defl. up price
PNE651KA482FR651V Kawasaki® V-Twin
48" UltraCut™ Series 2 799 lbs 77.8" 70.0" 59.2" 48.0" $
PNE691KA522FR691V Kawasaki
V-Twin52" UltraCut Series 2 805 lbs 77.8" 70.0" 64.0"" 52.8 $
Acc
esso
ries
& A
ttac
hmen
ts
Key
Feat
ures • Seatpositionoptimizedforcomfortandimproved
center of gravity.
• Anti-scalprollersallowthedecktocontourthegroundto prevent scalping.
• 20x8.0-10TurfMaster® drive tires maximize traction.
• Rear-slopingfoldableROPSstandard.
• Groundspeedsof0-7.0mphforward,0-4.0mph reverse, increase productivity.
• Large7-gallon,singlefueltankwithsinglefilllocation to reduce your time at the gas pump.
• Spring-supportedseatforoperatorcomfort.
See Page 132 foR exmaRk® waRRanty DetailS
Key
Feat
uresPowered by FR651V and FR691V Kawasaki V-Twin engines
for superior performance and long life.
Available with 48" and 52" UltraCut Series 2 cutting decks.
additional FeatuRes include:
• Patentedcutting-deckdesignyieldsprofessionalresults.
• Pneumatic,13x5frontcasterwheelsprovidea smoother ride. • HydroGearZT2800hydrostaticdrivesystem
delivers a smooth drive experience and years of reliable service.
• Foot-operatedQuickHeightAdjustSystemallows fast and easy height adjustments.
5150
engines – FR651V and FR691V Kawasaki V-Twin,® governed to 3,600 rpm.air Filter – Standard engine manufacturer's air filter.drive system – Dual Hydro-Gear® ZT2800 hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components. Hydro Fluid – Exmark Premium Hydro oil.speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–4.0 mph (6.4 kmph) reverse.pto engagement – MagStop electromagnetic 125-ft-lb.Fuel capacity – 7-gallon (26.5-L) single fuel tank with single fill location.drive-wheel Release – Allows unit movement without engine running.safety package – Operator Presence Controls (OPC) and drive system interlock with safety interlock system indicators.Rollover protection system (Rops) – 2-post foldable ROPS standard with seat belt and latch.deck lift – Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.casters – 0.38"-thick caster yoke arms.cup holder – Standard.
style – Full-floating, UltraCut Series 2. Side-discharge standard with the option to bag or mulch.widths available – 48" and 52." deck construction – 10-gauge top that is formed and continuously seam welded and 10-gauge side skirt. 4-point suspension, full-floating deck with 3 adjustable, anti-scalp rollers.
PION
EER® E-SER
IESPIO
NEE
R® E
-SER
IES deck
size
BLADES material is 0.20" thick alloy steel BELTS# of
BladesBlade
lengthnotched air Foil
solid air Foil low lift mulching*
eXtreme 2mulching
pumpdrive
Blade drive
48" 3 16.25" 103-6401 103-6381 103-6386 109-6389 116-5177 115-9613 109-5364
52" 3 18.00" 103-6402 103-6382 103-6387 109-6390 116-5175 115-9613 109-3661
*Requires installation of Micro-Mulch accessory for proper mulching
Drive Wheels Pneumatic Tire Assembly
Rim only tire only complete Rim only tire only complete
48" 116-2299 116-3165 116-3163 119-3472 120-2252 120-2251
52" 116-2299 116-3165 116-3163 119-3472 120-2252 120-2251
Pow
er C
ompo
nent
sD
ecks
Equi
pmen
t
cutting Height – 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator seat.Blade spindles – No maintenance, sealed and non-greasable spindles; 7.50"-diameter cutter housing contains 17mm-(.67")diameter spindle shaft and hex blade drive.Blade-tip speed – Approximately 18,500 fpm.
tractor Frame – Unibody, welded, heavy-duty 2" square tublar steel.steering and motion control – Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment.Front caster tires – 13 x 5.0-6, smooth tread, pneumatic.drive tires – 20 x 8.0-10 Turf Master® drive tires. turning Radius – True zero-turn.parking Brake – Lever-actuated pawl brake.seat – Commercial-grade, high-back contoured foam padded with armrests. Hinged mounting with spring suspension. Adjustment is fore and aft from operator's position.electrical – 12-volt battery with 15-amp alternator.engine Hourmeter – Standard.
Dec
ks
5352
Powered by a FR691V Kawasaki V-Twin engine.
Available with 50" Series 2 fabricated cutting deck.
additional FeatuRes include:
• Deckiseasilyremovedforservicing. • FeaturesHydro-Gear® ZT2800. • Automaticparkbrakesystem. • Standardengineguardforextraprotection. • Spring-supportedseatforoperatorcomfort. • 3-gallonfueltankwithsinglefilllocation. • Groundspeedsupto7mph. • Rubberfloormatisstandard.
See Page 132 foR exmaRk® waRRanty DetailS
2-Bag Collection System ................................................116-6512
Equipment Cover - Small ................................................ 116-1378
Hitch Kit ................................................................................ 79014
Hour Meter ......................................................................116-5461
Rubber Floor Mat ............................................................116-5457
Mulching Kit .....................................................................116-6514
Sun Shade ............................................................................. 79011
For more information on Accessories see page 94-125
QU
EST® S-SER
IESQU
EST®
S-S
ERIE
Smodelnumber
width
engine size deck weight length Height defl. down defl. up price
QTS691KA502FR691V Kawasaki® V-Twin
50" Series 1 fabricated 681 lbs. 71.8" 42.9" 62.8" 54.6" $
Acc
esso
ries
& A
ttac
hmen
ts
Key
Feat
ures
5554
speciFications (continued)
engines – FR691V Kawasaki® governed to 3,300 rpm.drive system – Two Hydro-Gear® ZT2800 hydrostatic transmission with charge pumps, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components.Hydro Fluid – Exmark Premium Hydro oil.speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward. 0–3.4 mph (5.5 kmph) reverse.pto engagement – MagStop electromagnetic 125-ft-lbs clutch.Fuel capacity – 3-gallon (11.4-L) single fuel tank.drive-wheel Release – Standard - allows unit movement without engine running.safety package – Operator Presence Controls (OPC) and drive system interlock.deck lift – Standard. Lever lift. Foot-assist lifts the deck to maneuver around obstacles.cup Holder – Standard.
style – Exmark Series 2 fabricated and welded steel deck. Side-discharge standard with the option to bag or mulch.widths available – 50."deck construction – 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper. 3 point suspension.cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard foot-operated assist.Blade spindles – No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 17mm- (.67") diameter spindle shaft.Blade-tip speed – Approximately 18,500 fpm.
QU
EST® S-SER
IESQU
EST®
S-S
ERIE
S deck size
BLADES material is 0.20" thick alloy steel BELTS# of
BladesBlade
length standardlow lift / mulching*
pumpdrive
Blade drive
50" 3 17.50" 115-5059 115-5062 119-3321 119-8820
*Requires installation of Micro-Mulch accessory for proper mulching
Drive Wheels Caster Wheels
Rim only tire only complete Rim only tire only complete
50" 116-2299 116-3165 116-3163 119-3472 119-3471 119-3473
Pow
er C
ompo
nent
sD
ecks
tractor Frame – Unibody, riveted 10-gauge steel.steering and motion control – Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 2-height positions.Front caster tires – 13 x 5 ribbed tread, pneumatic.drive tires – 20 x 8.0-10, 4-ply Turf Master.®
turning Radius – True zero-turn.parking Brake – Automatic-actuated pawl brake.seat – Commercial grade, high-back contoured foam padded with armrests. Hinged mounting and spring suspension. Adjustment is fore and from operator position.electrical – 12-volt battery with 15-amp alternator.engine Hourmeter – Optional.
Equi
pmen
t
5756
Powered by a FR651V and FR691V Kawasaki V-Twin engines.
Available with 42" and 50" Series 1 stamped cutting decks.
additional FeatuRes include:
• Deckiseasilyremovedforservicing. • Hydrostaticcontrol:Hydro-gear® ZT2100 (42") and ZT2200 (50"). • Automaticparkbrakingsystem. • Standardengineguardforextraprotection. • Spring-supportedseatforoperatorcomfort. • 3-gallonfueltankwithsinglefilllocation. • Groundspeedsupto7mph. • Rubberfloormatisstandard.
See Page 132 foR exmaRk® waRRanty DetailS
2-Bag Collection System (42" unit) ................................116-4764 2-Bag Collection System (50" unit) ................................116-4765Blowout Ring Kit (42" unit) ............................................. 114-1620Blowout Ring Kit (50" unit) ............................................. 114-1608Equipment Cover - Small ................................................ 116-1378Hitch Kit ................................................................................ 79014Hour Meter ......................................................................116-5461Mulching Kits ............................................... Also refer to 124-125 42" unit .......................................................................116-4766 50" unit ....................................................................... 116-4767Rubber Floor Mat (42" unit) ........................................... 120-5456Rubber Floor Mat (50" unit) .......................................... 120-5457Sun Shade ............................................................................. 79011Turf Striping Kit ...............................................................120-7905
For more information on Accessories see page 94-125
QU
EST® E-SER
IESQU
EST®
E-S
ERIE
Smodelnumber
width
engine size deck weight length Height defl. down defl. up price
QTE651KA421FR651V Kawasaki® V-Twin
42" Series 1 stamped 551 lbs 71.8" 40.7" 53.8" 45.3" $
QTE691KA501FR691V Kawasaki
V-Twin50" Series 1 stamped 623 lbs 72.9" 42.9" 63.0" 54.6" $
Acc
esso
ries
& A
ttac
hmen
ts
Key
Feat
ures
5958
speciFications (continued)
engines – FR651V and FR691V Kawasaki® V-Twin, governed to 3,300 rpm.drive system – Dual Hydro-Gear® ZT2100 hydro static transmission with no hoses and integrated cooling fans on 42" unit. Dual Hydro-Gear ZT2200 with no hoses and integrated cooling fans on 50" unit.speed – Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward. 0–3.4 mph (5.5 kmph) reverse.pto engagement – MagStop electromagnetic 80-ft-lbs clutch on 42". MagStop electromagnetic 125-ft-lbs clutch on 50".Fuel capacity – 3-gallon (11.4-L) single fuel tank.drive-wheel Release – Standard - allows unit movement without engine running.safety package – Operator Presence Controls (OPC) and drive system interlock.deck lift – Standard: lever lift. Foot-assist lifts the deck to maneuver around obstacles.cup Holder – Standard.
style – Exmark Series 1 stamped steel deck. Side-discharge standard with option to bag or mulch.widths available – 42" and 50."deck construction – 13-gauge stamped steel deck shell. Formed spindle mounting locations for improved strength and reduced weight. 3 point suspension.
QU
EST® E-SER
IES Q
UES
T® E
-SER
IES deck
size
BLADES material is 0.20" thick alloy steel BELTS# of
BladesBlade
length standardlow lift / mulching*
pumpdrive
Blade drive
42" 2 21.60" 110-6568 106-2247 119-3309 119-8819
50" 3 17.50" 115-5059 115-5062 119-3321 119-8820
*Requires installation of Micro-Mulch accessory for proper mulching
Drive Wheels Caster Wheels
Rim only tire only complete Rim only tire only complete
42" 107-2475 110-6885 119-3465 114-1641 110-6791 110-6785
50" 217-60 119-8909 119-8908 119-3472 119-3471 119-3473
Pow
er C
ompo
nent
sD
ecks
cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard foot-operated assist.Blade spindles – No maintenance, sealed and non-greasable spindles. 5.50"-diameter cutter housing with 17mm- (.67")diameter spindle shaft. Blade-tip speed – Approximately 18,500 fpm.
tractor Frame – Unibody, riveted 10-gauge steel.steering and motion control – Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 2-height positons.Front caster tires – 350/410 x 4 smooth tread, pneumatic on 42" unit. 13 x 5 ribbed tread, pneumatic on 52" unit.drive tires – 18 x 7.50-8, 4-ply Turf Tech TL on 42" unit. 18 x 9.50-8, 4-ply Turf Tech TL on 52" unit.turning Radius – True zero-turn.parking Brake – Automatic-actuated pawl brake.seat – 42" unit has high-back foam padded with armrests. Hinged mounting with spring suspension. 50" unit has commercial-grade, high-back contoured foam padded with armrests. Hinged mounting and spring suspension. Adjustment is fore and from operator position.electrical – 12-volt battery with 15-amp alternator.engine Hourmeter – Optional.
Equi
pmen
tD
ecks
6160
Powered by Kawasaki V-Twin or Kohler Electronic Fuel Injection engines.
Available with 36" UltraCut Series 3 and 48," 52" & 60" UltraCut Series 4 cutting decks.
additional FeatuRes include:
•Introducingtheadditionofanew60"deck. •Ergonomicallydesignedsteeringsystemincludesan Adjustable Front Reference bar that can control the top end speed of the machine. •Self-compensatingsuspensionmakesstandingmore comfortable. •Platformfoldsup,allowingthemachinetofunctionlikea walk-behind. •Superiortractionandhandlingallowsyoutomow changing landscapes effortlessly.
3-Bushel Bagger .....................................................GC360236" requires adapter for bagger and OCD ......... 116-4248Anti-Scalp Roller Kit (36" unit - right front corner).............116-5305 (48" & 52" units - front of deck) ......116-4608 (60" unit - left rear corner) ................116-4614Equipment Cover - Large ......................................116-1379Front Weight Kit .................................................... 116-2935Jack .........................................................................116-1351Jack Receiver (36" unit) ........................................ 116-4414Jack Receiver (48," 52" & 60" units) ....................116-3300Light Kit ................................................................. 116-3298Mulching Kits ..........................................See Page 124-125Operator Controlled Discharge (except 60") ...OCDWB01 60" unit .................................................... Coming SoonTurf Striping Kit (36" unit) .....................................116-5084Turf Striping Kit (48," 52" & 60" units)................. 116-5320Trash Container ..................................................... 116-3297
For more information on Accessories see page 94-125
VAN
TAG
E®VA
NTA
GE®
modelnumber
length width
engine size deck weightplatform
up
platform
down Height
defl.
down
defl.
up price
VT541KA363 FS541V Kawasaki® V-Twin 36" UltraCut™ Series 3 790 lbs 60.5" 74.0" 50.0" 39.1" 48.0" $
VT541KA363CA1 FS541V Kawasaki V-Twin 36" UltraCut Series 3 790 lbs 60.5" 74.0" 50.0" 39.1" 48.0" $
VT651KA484 FS651V Kawasaki V-Twin 48" UltraCut Series 4 838 lbs 60.5" 74.0" 50.0" 59.6" 51.8" $
VT691KA484CA1 FS691V Kawasaki V-Twin 48" UltraCut Series 4 855 lbs 60.5" 74.0" 50.0" 59.6" 51.8" $
VT691KA524 FS691V Kawasaki V-Twin 52" UltraCut Series 4 866 lbs 60.5" 74.0" 50.0" 64.8" 56.3" $
VT691KA524CA1 FS691V Kawasaki V-Twin 52" UltraCut Series 4 866 lbs 60.5" 74.0" 50.0" 64.8" 56.3" $
VT730EKC524 ECV730 Kohler® Command™ EFI 52" UltraCut Series 4 875 lbs 60.5" 74.0" 50.0" 64.8" 56.3" $
VT740EKC604 ECV740 Kohler Command EFI 60" UltraCut Series 4 883 lbs 62.5" 76.0" 50.0" 72.8" 63.9" $
Acc
esso
ries
& A
ttac
hmen
ts
Key
Feat
ures •Angledplatformsidesallowoperatortoshifthisbody
weight for smoother ride when mowing hillsides. •Precision-designed,maintenance-freespindleseliminatethe need for yearly greasing. •11 x 4.0-5, smooth tread, semi-pneumatic front caster tires for increased reliability. •20 x 10.5-8 Kenda drive tires on 48," 52" and 60" units and 18 x 8.5-8 Kenda drive tires on 36" units for optimum traction. •Tough 1.5" x 3.0" steel frame tubes ensure maximum durability. •Integrated tie-down points for secure trailering. •Large8-gallonfueltank. •Heavy-dutycanisterairfiltrationsystemontheKohlerEFI powered units that improves engine life, simplifies maintenance and boosts overall productivity. See Page 132 foR exmaRk® waRRanty DetailS
Key
Feat
ures
1Units are carb-compliant.
6362
engines – FS541V, FS651V, FS691V Kawasaki®; ECV730 & ECV740 Kohler® Command™ EFI engines. All engines governed to 3,600 rpm.drive system – Two Hydro-Gear® 10 cc pumps powering two Parker 12 cubic inch motors. Hydro Fluid – Exmark Premium Hydro oil.speed – Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse.pto engagement – MagStop electromagnetic 175-ft-lb clutch on 36," 48" & 52" models. MagStop electromagnetic 200-ft-lb clutch on 60" unit.Fuel capacity – 8-gallon, (30.2-L) single fuel tank with single fill location.drive-wheel Release – Allows unit movement without engine running.safety package – Operator Presence Controls (OPC) with safety interlock system indicators. deck lift – Standard. Mechanical lift-assist springs.
style – Full-floating UltraCut Series 3 on 36" unit and full-floating UltraCut Series 4 on 48," 52" and 60" units. Side-discharge standard with molded discharge chute and option to bag or mulch.widths available – 36," 48," 52" and 60." deck construction – 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. 4-point suspension.
speciFications (continued)
VAN
TAG
E®VA
NTA
GE®
deck size
BLADES material is 0.20" thick alloy steel BELTS# of
BladesBlade
lengthnotched air Foil
solid air Foil low lift mulching*
eXtreme 2 mulching
pumpdrive
Blade drive
36" 2 18.00" 103-6402 103-6382 103-6387 103-6392 116-5175 119-0174 116-3703
48" 3 16.25" 103-6401 103-6381 103-6386 103-6391 116-5177 114567 99-4627
52" 3 18.00" 103-6402 103-6382 103-6387 103-6392 116-5175 114567 109-5018
60" 3 20.50" 103-6403 103-6383 103-6388 103-6393 116-5174 114567 99-4627
Drive Wheels Front Caster Wheelswheel &
tirewheel only
tire only
Rim only
tire only complete
36" 116-4587 116-4605 116-4606 n/a n/a 112-3810
48" 120-6465 116-4605 120-6466 n/a n/a 112-3810
52" 120-6465 116-4605 120-6466 n/a n/a 112-3810
60" 120-6465 116-4605 120-6466 n/a n/a 112-3810
Pow
er C
ompo
nent
sD
ecks
Equi
pmen
t
cutting Height – 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.Blade spindles – No maintenance, sealed and non-greasable spindles. 7.75"-diameter cutter housing with 1.75"-diameter splined blade driver 25mm (0.98") diameter spindle shaft.Blade-tip speed – Approximately 18,500 fpm.
tractor Frame – Welded, heavy-duty 1.5" x 3" tubular steel.suspension platform – Self-compensating elastomeric suspension. Stowable operator platform.steering and motion control – Twin levers with no-tools adjustable front reference bar to modify forward ground speed. casters – .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.Front caster tires – 11 x 4.0-5, smooth-tread, semi-pneumatic tires.drive tires – 18 x 8.5-8 Kenda Tires on 36" unit. 20 x 10.5-8 Kenda drive tires on 48," 52" and 60" units. turning Radius – True zero-turn.parking Brake – Lever-actuated bar brake.electrical system – 12-volt battery with 15-amp alternator on Kawasaki units. 12-volt battery with 20-amp alternator on Kohler EFI unit.engine Hourmeter – Standard.
*Requires installation of Micro-Mulch accessory for proper mulching
Dec
ks
6564
Typically, fuel costs for propane will be less than gasoline, which results in lower operating costs.Propane is considered a GREEN Alternative Fuel and when burned, it produces less GHG (green house gas) yielding a reduced CARBON FOOTPRINT as compared to gasoline. PERC (Propane Education & Research Council) reports that GHG reductions typically range in the 20% to 25% range.No known restrictions regarding hours of operation on "Ozone Action Days."
ECO
-FR
IEN
DLY
Bio-
Die
sel
Diesel models are biodiesel ready, up to B20, for lower emissions and reduced environment impact.
B20 represents a mix of 20 percent biodiesel and 80 percent diesel.
Cleaner-burning alternative fuel made from renewable resources.
Compared to petroleum-based fuels, biodiesel emits less carbon dioxide, a major contributor to greenhouse gas emissions. Also emits less unburned hydrocarbons and particulate matter which are considered harmful emissions.
Superior fuel lubricity resulting in less wear and equipment downtime.
Prop
ane
ECO
-FRIEN
DLY
mower model number engine size deck price
Lazer® Z DS-Series LZDS902K605 D902 Kubota® Diesel 60" Series 5 $
Lazer Z DS-Series LZDS902K725 D902 Kubota Diesel 72" Series 5 $
Lazer Z X-Series LZX749EKC606EVC749 Kohler® Electronic Fuel Injection
50" UltraCut™ Series 6 $
Lazer Z S-Series LZS730EKC604EVC730 Kohler Electronic Fuel Injection
60" UltraCut Series 4 $
Lazer Z S-Series LZS749EKC724EVC749 Kohler Electronic Fuel Injection
72" UltraCut Series 4 $
Navigator® NV730EKCEVC730 Kohler Electronic Fuel Injection
42" or 48" Center Discharge $
Vantage® VT730EKC524EVC730 Kohler Electronic Fuel Injection
52" UltraCut Series 4 $
Vantage VT740EKC604EVC740 KohlerElectronic Fuel Injection
60" UltraCut Series 4 $
Turf Tracer® X-Series TTX650EKCEEVC650 KohlerElectronic Fuel Injection
52" or 60" UltraCut Series 4 $
Lazer Z S-Series LZS801PKA604FX801V Kawasaki® V-Twin Propane
60" UltraCut Series 4 $
Lazer Z S-Series LZS801PKA724FX801V Kawasaki V-Twin Propane
72" UltraCut Series 4 $
Turf Tracer X-Series TTX691PKAE FX691V Kawasaki V-Twin Electric Start Propane 52" or 60" UltraCut Series 4 $
Turf Tracer S-Series TTS600PKAE483 FS600V Kawasaki V-Twin Electric Start Propane 48" UltraCut Series 3 $
Prop
ane
Elec
troni
c Fu
el In
ject
ion Reduces fuel consumption, fewer emissions and carbon
footprint.Delivers up to 25% in fuel savings.Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.Easy start in any altitude or climate condition (no manual choke).Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.Sequential Fuel Injection delivers the precise amount of fuel and spark where needed to maximize efficiency and power.
Propane is a cleaner burning fuel and has fewer combustion by-products as compared to gasoline. Engine oil will contain less contaminates for the equivalent hours of operation.Propane fuel stability - No deterioration or breakdown of fuel over time creating "varnish deposits" as gasoline does. No need for fuel stabilizers during long periods of storage.The propane tanks are of a unique "vapor draw" design that includes a special baffle system to prevent liquid propane ingestion into the supply line, which can cause damage to fuel system components and render the unit inoperative.
6766
E N H A N C E D C O N T R O L S Y S T E M
Engines are powered by Kohler Command, Kohler Command Electronic Fuel Injection, Kawasaki V-Twin, or Kawasaki V-Twin with propane conversion.
Available with 52" and 60" UltraCut™ Series 4 cutting decks.
additional FeatuRes include:
• Features Exmark®’s exclusive Enhanced Control System (ECS). • Standardwithheavy-dutycanisterairfiltrationsystems. • Groundspeedsupto6.75mphforwardand2.25mph
in reverse.3-Bushel Bagger ...............................................................GC3602
Equipment Cover - Large ...............................................116-1379
Mulching Kits ...............................................Also refer to 124-125
52" unit ..........................................................................MK526
60" unit ..........................................................................MK606
Operator Controlled Discharge ................................. OCDWB01
StandOn ....................................................................... STANDON
Turf Striping Kit ................................................See Page 106-107
For more information on Accessories see page 96-125
TURF TR
AC
ER® X
-SERIESTURF
TR
AC
ER® X
-SER
IES model
number
width
engine controls weight length Height defl. down defl. up price
TTX640KCE CV640 Kohler® Command™
Electric Start ECS 439 lbs $
TTX650EKCE ECV650 Kohler Command EFI Electric Start ECS 439 lbs $
TTX691KAE FX691V Kawasaki® V-Twin Electric Start ECS 429 lbs $
TTX691KAECA1 FX691V Kawasaki® V-Twin Electric Start ECS 434 lbs $
TTX691PKAE1 FX691V FX691V Kawasaki V-Twin Electric Start Propane ECS 448 lbs $
deck size deck overall unit dimensions
FMD524 52" UltraCut™ Series 4 292 lbs 83.4" 45.0" 64.8" 53.4" $
FMD604 60" UltraCut Series 4 333 lbs 83.4" 45.0" 73.0" 61.4" $
Acc
esso
ries
& A
ttac
hmen
ts
Key
Feat
ures
Key
Feat
ures
• Large-capacityelectromagneticPTOclutchdeliversmaximumlife and durability.
• Electric-startenginesstandard. • Blade-tipspeedapproximately18,500fpm. • Standardonallmodels,large(18x8.50-8)TurfMaster® rear
tires for easier mobility on and off curbs. • Standardwith11x4.0-5smoothtread,semi-pneumatic, front caster tires, which nearly eliminate flat tires. See Page 132 foR exmaRk® waRRanty DetailS
1Units are carb-compliant.
6968
engines – CV640 Kohler® Command™; ECV Kohler Command EFI; FX691V Kawasaki® V-Twin; FX691V Kawasaki V-Twin with propane conversion. All engines governed to 3,600 rpm.air Filter – Heavy-duty canister air filtration system.pto engagement – MagStop Electromagnetic 200 ft-lbs clutch.drive system – Twin Hydro-Gear® variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.Hydro Fluid – Exmark Premium Hydro oil.speed – Infinitely variable selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse.Fuel capacity – 5-gallon (18.9-L) fuel tank. Propane unit has 33.5-lb (8.0 gallon) propane tank.
style – Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.widths available – 52" (132 cm) or 60" (152.4 cm).deck construction – 10-gauge top that is formed and continuously seam-welded, with 10-gauge top reinforcement plate, 7-gauge side skirt and 7-gauge reinforcement rings at spindle assembly. 4-point suspension, full-floating deck with 6 adjustable anti-scalp rollers.cutting Height – 1.5" (3.8 cm.) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.Blade spindles – No maintenance, sealed and non-greasable spindles; 5.4"-diameter cutter housing with 1.75"-diameter splined blade drive and 1.0"-diameter spindle shaft. Blade-tip speed – Approximately 18,500 fpm.
speciFications (continued)
TURF TR
AC
ER® X
-SERIESTURF
TR
AC
ER® X
-SER
IES
deck size
BLADES material is 0.20" thick alloy steel BELTS
# of Blades
Blade length
notched air Foil
solid air Foil low lift mulching*
eXtreme 2mulching
pumpdrive
a-sectionmower drive
Blade drive
52" 3 18.00" 103-6402 103-6382 103-6387 103-6392 116-5175 109-2584 103-22401 103-2329
60" 3 20.5" 103-6403 103-6383 103-6388 103-6393 116-5174 109-2584 1-6033061 1-633173
*Requires installation of Micro-Mulch accessory for proper mulching
1 Mower drive belt is engine-to-deck belt.
Drive Wheels s/n 320,000 & Above Front Casters (11 x 4.0-5)
Hub tire only Rim only complete complete
52" 1-602997 103-2237 103-2238 103-1715 109-3524
60" 1-602997 103-2237 103-2238 103-1715 109-3524
Pow
er C
ompo
nent
sD
ecks
engine deck – 7-gauge, heavy-duty welded steel.steering & motion control – Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.Front caster tires – Double-yoke, semi-pneumatic, 11 x 4.0-5, smooth tread.drive tires – 18 x 8.5-8, 4-ply Turf Master.®
tracking adjustment – Insta-Track.drive-wheel Release – Allows unit movement without engine running. turning Radius – True zero-turn.safety package – Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator's position without stopping engine.parking Brake – Lever-actuated mechanical compression.electrical – 12-volt battery, 15-amp alternator, except for ECV650 has 20-amp alternator.engine Hourmeter – Standard.
Equi
pmen
t
7170
Engines are powered by Kawasaki V-Twin or Kawasaki V-Twin with propane conversion.
Available with 36," 48" & 52" UltraCut Series 3 cutting decks.
additional FeatuRes include:
• Groundspeedsupto6.2mphforwardand2.2mphin reverse.
• FeaturesExmark®’s exclusive Enhanced Control System (ECS).
• Electric-startstandardonFS600Vengines.• Blade-tipspeedapproximately18,500fpm. 3-Bushel Bagger .............................................................. GC3602
Equipment Cover - Large ...............................................116-1379
Sulky Counterweight Kit ................................................103-2637
Mulching Kits .............................................. Also refer to 124-125
36" unit ...................................................................... MK363Q
48" unit ...................................................................... MK483Q
52" unit ...................................................................... MK523Q
Operator Controlled Discharge .................................OCDWB01
StandOn .......................................................................STANDON
Turf Striping Kit ..........................................Also refer to 106-107
36" unit .................................................................. STRHPW36
48" & 52" unit ....................................................... STRHPW48
For more information on Accessories see page 96-125
E N H A N C E D C O N T R O L S Y S T E M
TURF TR
AC
ER® S-SERIESTU
RF T
RA
CER
® S
-SER
IES model
number
width
engine controls size deck weight length Height defl. down defl. up price
TTS481KA363 FS481V Kawasaki® V-Twin ECS 36" UltraCut™ Series 3 569 lbs 77.7" 42.0" 46.7" 36.1" $
TTS481KA363CA1 FS481V Kawasaki® V-Twin ECS 36" UltraCut Series 3 574 lbs 77.7" 42.0" 46.7" 36.1" $
TTS481KA483 FS481V Kawasaki V-Twin ECS 48" UltraCut Series 3 602 lbs 73.7" 42.0" 57.9" 48.1" $
TTS541KA483CA1 FS541V Kawasaki V-Twin ECS 48" UltraCut Series 3 626 lbs 73.7" 42.0" 57.9" 48.1" $
TTS600KAE483 FS600V Kawasaki V-Twin Electric Start ECS 48" UltraCut Series 3 621 lbs 73.7" 42.0" 57.9" 48.1" $
TTS600PKAE4831 FS600V Kawasaki Electric Start Propane ECS 48" UltraCut Series 3 689 lbs 73.7" 42.0" 57.9" 48.1" $
TTS541KA523 FS541V Kawasaki V-Twin ECS 52" UltraCut Series 3 636 lbs 75.9" 42.0" 63.5" 53.0" $
TTS600KAE523 FS600V Kawasaki V-Twin Electric Start ECS 52" UltraCut Series 3 659 lbs 75.9" 42.0" 63.5" 53.0" $
Acc
esso
ries
& A
ttac
hmen
ts
Key
Feat
ures
• Large16x7.5-8TurfMaster® drive tires on all 48" and 52" models for increased traction and overall performance (36": 16 x 6.50-8).• Standardwith9x3.5-4smoothtread,semi-pneumatic front caster tires, which nearly eliminate tire repair.• Innovativebladeengagementsystemprovidesultra- smooth blade engagement and minimizes maintenance and repair costs associated with more expensive electric PTO designs.
See Page 132 foR exmaRk® waRRanty DetailSKe
y Fe
atur
es
1Units are carb-compliant.
7372
engines – FS481V, FS541V, & FS600V Kawasaki® V-Twin; FS600V Kawasaki V-Twin with propane conversion. All engines are governed to 3,600 rpm.pto engagement – Mechanical blade engagement with blade brake. drive system – Twin Hydro-Gear® variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.Hydro Fluid – Exmark Premium Hydro oil.speed – Infinitely variable selection from 0– 6.2 mph (10.0 kmph) forward, 0–2.2 mph (3.5 kmph) reverse. Fuel capacity – 5-gallon (18.9-L) fuel tank. Propane unit has 20.0-lb (8.0 gallon) propane tank.
style – Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.widths – 36" (91.4 cm), 48" (121.9 cm) or 52" (132 cm).deck construction – 10-gauge top that is formed and continuously seam-welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. Blade spindles – No maintenance, sealed and non-greasable spindles; 5.40"-diameter cutter housing with 1.75"-diameter splinded blade drive and 1.0" diameter spindle shaft.Blade-tip speed – Approximately 18,500 fpm.
speciFications (continued)speciFications (continued)
TURF TR
AC
ER® S-SERIESTU
RF T
RA
CER
® S
-SER
IES
deck size
BLADES material is 0.20" thick alloy steel BELTS# of
BladesBlade
lengthnotched air Foil
solid air Foil low lift mulching*
eXtreme 2mulching
pumpdrive
Blade clutch
deck drive
36" 2 18.00" 103-6402 103-6382 103-6387 103-6392 116-5175 109-1057 103-6317 1-413094
48" 3 16.25" 103-6401 103-6381 103-6386 103-6391 116-5177 109-1057 103-6317 1-413093
52" 3 18.00" 103-6402 103-6382 103-6387 103-6392 116-5175 109-1057 103-6317 1-413308
*Requires installation of Micro-Mulch accessory for proper mulching
Drive Wheels Drive Wheels Caster Wheels
48" & 52" s/n 319,999 & under and all 36" 48" & 52" s/n 320,000 & over Semi-pneumatic
Hub tire only Rim only complete tire only Rim only complete complete
36" 1-602997 1-413474 1-603715 1-413474 1-613264 1-603715 1-613263 103-2171
48" 1-602997 1-413474 1-603715 1-413474 1-613264 1-603715 1-613263 103-2171
52" 1-602997 1-413474 1-603715 1-413474 1-613264 1-603715 1-613263 103-2171
Pow
er C
ompo
nent
sD
ecks
engine deck – 7-gauge, heavy-duty welded steel.steering & motion control – Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.Front caster tires – Double-yoke, 9 x 3.5-4, smooth tread, semi-pneumatic.drive tires – 16 x 7.5-8, 4-ply Turf Master® on all 48" and 52"models; 16 x 6.5-8, 4-ply Turf Master on 36" models.tracking adjustment – Insta-Track.drive-wheel Release – Allows unit movement without engine running. turning Radius – True zero-turn.safety package – Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine. parking Brake – Lever-actuated mechanical compression.electric system – 12-volt battery, 15-amp alternator (only on electric start models).
Equi
pmen
t
7574
Powered by FS481V Kawasaki V-Twin engine.
Available with 36" UltraCut Series 2 or 48" UltraCut Series 3 cutting decks.
additional FeatuRes include:
• Groundspeedsupto6.2mphforwardand2.2mphin reverse.
• FeaturesExmark®'s exclusive Enhanced Control System (ECS).
E N H A N C E D C O N T R O L S Y S T E M
3-Bushel Bagger ............................................................... GC3602
Equipment Cover - Large ...............................................116-1379
Sulky Counterweight Kit ................................................ 103-2637
Mulching Kits ............................................... Also refer to 124-125
36".................................................................................. MK362
48" unit ....................................................................... MK483Q
Operator Controlled Discharge ..................................OCDWB01
StandOn ........................................................................STANDON
For more information on Accessories see page 96-125
VIK
ING
™VIK
ING
™modelnumber
width
engine controls size deck weight length Height defl. down defl. up price
VH481KA362FS481V Kawasaki®
V-TwinECS 36" UltraCut™
Series 2 481 lbs 78.0" 43.2" 47.0" 36.4" $
VH481KA362CA1FS481V KawasakiV-Twin
ECS 36"UltraCutSeries 2
486 lbs 78.0" 43.2" 47.0" 36.4" $
VH481KA483FS481V Kawasaki V-Twin
ECS 48"UltraCutSeries 3
531 lbs 78.0" 43.2" 57.9" 48.1" $
VH481KA483CA1FS481V Kawasaki V-Twin
ECS 48"UltraCutSeries 3
536 lbs 78.0" 43.2" 57.9" 48.1" $
Acc
esso
ries
& A
ttac
hmen
ts
Key
Feat
ures
• High-clearance,well-balanceddeckmakescurbclimbing and trailering easier.
• Blade-tipspeedapproximately18,500fpm.
• Large(16x6.5-8)TurfMaster® rear tires provide increased traction and performance.
• 9x3.5-4smooth-tread,semi-pneumaticfrontcaster tires minimize tire repairs.
See Page 132 foR exmaRk waRRanty DetailS
Key
Feat
ures
1Units are carb-compliant.
7776
engines – FS481V Kawasaki® engine governed to 3,600 rpm.pto engagement – Mechanical blade engagement with blade brake.drive system – Twin Hydro-Gear® variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54 cm) tapered shafts.Hydro Fluid – Exmark Premium Hydro oil.speed – Infinitely variable selection from 0– 6.2 mph (10.0 kmph) forward, 0–2.2 mph (3.5 kmph) reverse. Fuel capacity – 5-gallon (18.9-L) fuel tank.
style – Fixed-deck, side-discharge standard with molded discharge chute and option to bag or mulch.widths available – 36" (91.4 cm) or 48" (121.9 cm).deck construction – 10-gauge top that is formed and continuously seam-welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.cutting Height – 1.0" (2.5 cm) to 4.25" (10.8 cm) in 0.25" (0.54 cm) increments. Blade spindles – No maintenance, sealed and non-greasable spindles; 5.40"-diameter cutter housing and 1.0"-diameter spindle tube.Blade-tip speed – Approximately 18,500 fpm.
speciFications (continued)speciFications (continued)
VIK
ING
™VIK
ING
™ BLADES material is 0.20" thick alloy steel BELTS
decksize
# of Blades
Blade length
notched air Foil
solid air Foil low lift mulching*
eXtreme 2mulching
pumpdrive
a-sectionmower drive
36" 2 18.00" 103-6584 103-1578 103-6580 103-6582 116-5176 103-4760 1-323735
48" 3 16.25" 103-6583 103-1577 103-6738 103-6581 116-5178 103-4760 1-403174*Requires installation of Micro-Mulch accessory for proper mulching
Drive Wheels Drive Wheels Caster Wheels
All 36" & 48" s/n 439,999 & below and 790,000 & above
48" s/n 440,000 to 789,000 Semi-pneumatic
Hub tire only Rim only complete tire only Rim only complete complete
36" 1-602997 1-413474 1-603715 1-413474 103-2171
48" 1-602997 1-413474 1-603715 1-413474 1-613264 1-603715 1-613263 103-2171
Pow
er C
ompo
nent
sD
ecks
engine deck – 7-gauge, heavy-duty, welded steel.Front caster tires – Double-yoke, 9 x 3.50-4, smooth-tread, semi-pneumatic.drive tires – 16 x 6.5-8, 4-ply Turf Master. ®
steering & motion control – Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.tracking adjustment – Insta-Track.drive-wheel Release – Allows unit movement without engine running. turning Radius – True zero-turn.safety package – Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine.parking Brake – Lever-actuated mechanical compression.
Equi
pmen
t
7978
Powered by FS481V Kawasaki V-Twin engine.
Available with 32" & 36" UltraCut Series 2 or 48" UltraCut Series 3 cutting decks.
additional FeatuRes include:
• Groundspeed2.0to6.2forward,withreverseassist. • High-clearance,well-balanceddeckmakescurb
climbing and trailering easier. • Reartires13x5.0-6TurfSaver® (32");
13 x 6.5-8 Turf Master® (36" and 48"). • 9x3.50-4smoothtread,semi-pneumaticfrontcaster
tires minimize tire repair.
E N H A N C E D C O N T R O L S Y S T E M
3-Bushel Bagger .............................................................GC3602
ECS Conversion Kit for Metro .....................................103-2444
Equipment Cover - Large .............................................116-1379
Mulching Kits .............................................Also refer to 124-125
32" unit ........................................................................MK322
36" unit ........................................................................MK362
48" unit .....................................................................MK483Q
Operator Controlled Discharge ............................... OCDWB01
For more information on Accessories see page 96-125
ME
TRO
®ME
TRO
®modelnumber
width
engine controls size deck weight length Height defl. down defl. up price
MG481KA322P FS481V Kawasaki®
V-Twin Pistol 32" UltraCut™ Series 2 421 lbs 73.0" 43.0" 43.3" 32.7" $
MG481KA362 FS481V Kawasaki V-Twin ECS 36" UltraCut
Series 2 451 lbs 78.0" 43.0" 47.0" 36.4" $
MG481KA362CA1 FS481V Kawasaki V-Twin ECS 36" UltraCut
Series 2 456 lbs 78.0" 43.0" 47.0" 36.4" $
MG481KA362P FS481V Kawasaki V-Twin Pistol 36" UltraCut
Series 2 451 lbs 73.0" 43.0" 47.0" 36.4" $
MG481KA483 FS481V Kawasaki V-Twin ECS 48" UltraCut
Series 3 501 lbs 73.0" 43.0" 57.9" 48.1" $
MG481KA483CA1 FS481V Kawasaki V-Twin ECS 48" UltraCut
Series 3 506 lbs 73.0" 43.0" 57.9" 48.1" $
MG481KA483P FS481V Kawasaki V-Twin Pistol 48" UltraCut
Series 3 501 lbs 73.0" 43.0" 57.9" 48.1" $
Acc
esso
ries
& A
ttac
hmen
ts
Key
Feat
ures
• Blade-tipspeedapproximately18,500fpm. • ChoosefromExmark®'s exclusive Enhanced Control System
(ECS) or traditional pistol grip operator controls. • Drivebeltscanbechangedquicklyandeasilywithoutthe
use of tools. • Drive-wheelpulleysandbrakedrumsaredesignedfor simple, low-cost maintenance. • Moldeddischargechutestandard.
See Page 132 foR exmaRk waRRanty DetailSKe
y Fe
atur
es
1Units are carb-compliant.
8180
engine – FS481V Kawasaki® V-Twin engine governed to 3,600 rpm.drive system – Direct drive from transmission to double-belt wheel drives (single belt on 32").transmission – 5-speed Peerless® 700-070A.speed control –Padded shift lever.Ground speed – 2.0 mph (3.2 kmph) to 6.2 mph (10 kmph) forward, reverse assist.pto engagement – Lever-actuated blade engagement with blade brake.Fuel capacity – 5-gallon (18.9-L) fuel tank.
style –Fixed-deck, side-discharge standard with molded discharge chute and option to bag or mulch.widths available – 32" (81.3 cm), 36" (91.4 cm) or 48" (121.9 cm).deck construction – 10-gauge top that is formed and continuously seam-welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.cutting Height – 1.0" (2.5 cm) to 4.25" (10.8 cm) in 0.25" (0.64 cm) increments.Blade spindles – No maintenance, sealed and non-greasable spindles; 5.4"-diameter cutter housing and 1.0"-diameter spindle tube.Blade-tip speed – Approximately 18,500 fpm.
speciFications (continued)speciFications (continued)
ME
TRO
®ME
TRO
®
deck size
BLADES material is 0.20" thick (s/n 130,000 & above) alloy steel BELTS# of
BladesBlade
lengthnotched air Foil
solid air Foil low lift mulching*
eXtreme 2mulching transmission
wheel drive
Blade drive1
32" 2 16.25" 103-6583 103-1577 103-6738 103-6581 116-5178 1-323280 1-323344 1-32373436" 2 18.00" 103-6584 103-1578 103-6580 103-6582 116-5176 1-323280 1-323288 1-32373348" 3 16.25" 103-6583 103-1577 103-6738 103-6581 116-5178 1-323280 1-323288 1-4031742
*Requires installation of Micro-Mulch accessory for proper mulching
Drive Wheels Caster Wheels 1 s/n above 220,000 2 Single Belt
Wheel & Tire
tire only
complete assembly*
complete
Semi-pneumatic
ECS Conversion KIt
32" 1-323346 1-323361 1-324193 103-2171 103-244436" 1-323719 1-323720 109-4721 103-2171 103-244448" 1-323719 1-323720 109-4721 103-2171 103-2444
*Includes sheave and brake drum
Pow
er C
ompo
nent
sD
ecks
Equi
pmen
t
engine deck – 7-gauge welded steel.steering & motion control – Gear drive with pistol grip, forward/reverse assist or gear drive with Enhanced Control System (ECS), forward/reverse assist.turning Radius – Zero-turn around center of inside tire.Front caster tires – Double-yoke, 9 x 3.5-4, smooth-tread, semi-pneumatic.drive tires – 32": 13 x 5.0-6, 4-ply Turf Saver®; 36" and 48": 13 x 6.5-6, 4-ply Turf Master.® safety package – Operator Presence Controls (OPC). Operator must have transmission in neutral and blades disengaged to leave operator’s position without stopping engine.mechanical parking Brake – Standard. Brake bands.
8382
ME
TRO
® 26ME
TRO
® 2
6modelnumber
length Height2
engine size controls weightw/o
handlewith handle
w/o
handlewith
handle width price
MSKABBC261 FJ180V Kawasaki® KAI 26" Self-propelled 151 lbs 41.0" 69.0" 19.0" 44.0" 27.0" $2 varies with 0.5" cutting selections.
Belts
# of blades Blade size standard mulch traction Blade Belt 5l3 Blade Belt, a4
1 26.10" 109-0343 103-6422 103-6114 116-0823 116-08613 s/n 790,000 and above 4 s/n 789,999 and below
Key
Feat
ures Increased productivity of 25% vs. traditional 21."
Powered by FJ180V Kawasaki KAI-Series engine, governed to 3,600 rpm, featuring an improved air filtration system that increases reliability and reduces maintenance.
additional FeatuRes include:
•Belt-drivenspindleprotectscrankshaftfrombladeimpacts.
•3-speeddrivesystemwithspeedsfrom2.0to4.1mph. •Cuttingdeckisconstructedofcastaluminumto
enhance maneuverability and includes a steel guard to increase durability.
•BladeBrakeClutch(BBC)enablesoperatorsto disengage blades without shutting down the engine. •Blade-tipspeedapproximately18,500fpm. •AddmulchingcapabilitiestoyourMetro® 26 with
optional mulch system or side-discharge kit.
Side Discharge Kit ........................................................109-4800
Mulching KitsIncludes Mulching Blade and Plug .................................... MK26
For more information on Accessories see page 96-125
engine – FJ180V Kawasaki KAI engine; governed to 3,600 rpm.engine deck – 1/4" die-cast aluminum.drive system – Self-propelled, rear-wheel gear-driven.transmission – 3-speed.speed – 2.0 mph (3.2 kmph) to 4.1 mph (6.6 kmph) forward.speed control – Finger-tip bail control.style – Fixed-deck. Rear-discharge bagger standard, with option to mulch or side-discharge.width – 26" (66 cm).cutting Height – 1.0" (2.5 cm) to 4.0" (10.2 cm) in 0.5" (1.27 cm) increments.Fuel capacity – 1 gallon (3.8-L) fuel tank. Bag capacity – 3 bushels (24 gallons).drive tires – 10 x 3-7, semi-pneumatic with die-cast aluminum rims with bearing assembly.Blade-tip speed – Approximately 18,500 fpm.safety package – Blade Brake Clutch (BBC).
•Assistedrear-height-adjusterdesign,incombination with simple and dependable front-height adjusters, makes it easy to change cutting heights from 1" to 4" in 0.5" increments. •Lightweightdesign,incombinationwithmowerstance, rear engine positioning and large tires greatly reduces turf compaction. See Page 132 foR exmaRk® waRRanty DetailS
Key
Feat
ures
Acc
esso
ries
Pow
er C
omp
onen
ts, D
ecks
& E
qui
pm
ent
1Unit is carb-compliant.
8584
Powered by premium FJ180V Kawasaki KAI series or GXV160 Honda engines.
additional FeatuRes include:
• Commercialperformanceanddurability. • 5"deepcuttingdeckprovidesExmark® signature cut and superior performance whether bagging or mulching. • Innovativeanddurablefrontheightadjustment replacing traditional pivot style adjusters. • Groundspeedsfrom0.0to4.2mph. • Single-pointrearheightadjustmentallowsoperatorto quickly change cutting height. • Expandedcuttingheightsfrom1.0"upto4.5"in
0.5" increments for maximum cut quality. • BladeBrakeClutch(BBC)enablesoperatortodisengage blades without shutting down the engine. • Frontengineguardprotectsvalvecoverandheadgasket from being damaged on trailers and helps when lifting. engine – FJ180V Kawasaki KAI engine governed to 3,300 rpm;
GXV 160 Honda engine governed to 3,300 rpm.engine deck – 5"-deep, 1/4"-thick die-cast aluminum.drive system – Self-propelled; rear-wheel gear-driven.transmission – Infinitely variable speed selection, dual wheel drive.speed – 0.0 mph to 4.2 mph (6.6 kmph) forward.speed control – Fingertip control.style – Fixed-deck, rear-discharge bagger and mulch plug standard.width – 21" (53.3 cm).cutting Height – 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.Fuel capacity – 1 gallon (3.8-L).Bag capacity – 2.5 bushels (20 gallons).drive tires – 9" x 2.5", semi-pneumatic.Blades – 1-20.5" blade.Blade-tip speed – Approximately 18,500 fpm.safety package – Zone start/Blade Brake Clutch (BBC).
9.5" Diameter Tire Kit .....................................................109-9328
Wheel Weight Kit ............................................................109-9331
For more information on Accessories see page 96-113
COM
MERCIA
L 21 X-SERIESCOM
MER
CIA
L 21
X-S
ERIE
S modelnumber engine size controls weight
length with handle
Height with handle width price
ECXKA211 FJ180V Kawasaki® KAI 21" Self-propelled 114 lbs 62.0" 38.0" 22.0" $
ECXHN211 GXV 160 Honda 21" Self-propelled 112 lbs 62.0" 38.0" 22.0" $
ECXKABBC211 FJ180V Kawasaki KAI 21" Self-propelled 115 lbs 62.0" 38.0" 22.0" $
ECXHNBBC211 GXV 160 Honda 21" Self-propelled 117 lbs 62.0" 38.0" 22.0" $
Blades - material is 0.135" thick alloy steel austempered to RC 38-44 FRont wHeels dRiVe wHeels
Bagging Low-Lift Extreme 2 Mulching Medium Lift/Mulch (standard) 9" (standard) 9.5" 9" (standard) 9.5"
108-3759-03 108-3762-03 108-0954-03 116-5005 116-4500 109-8016 109-8026 109-8032 109-8022
Belts caBles
Drive BBC Zone (Honda) Zone (Kawasaki) BBC Drive
109-7299 110-1790 116-4443 116-0905 116-0901 116-0904
Acc
esso
ries
Key
Feat
ures
• Formed,steel-wearplates,arestrategicallyplacedon the edges of the cutting deck to ensure that the deck is not damaged from impacts and abrasions. • DriveandOPCbailsarefoam-coatedtominimize vibration and fatigue. • 1-gallonfuelcapacity. • Mulchplugandreardoorhandlestandard. See Page 132 foR exmaRk® waRRanty DetailSKe
y Fe
atur
esPo
wer
Com
pone
nts,
Dec
k &
Equ
ipm
ent
1Units are carb-compliant.
8786
Powered by Kawasaki commercial-grade FJ180V engine in push or self-propelled.
additional FeatuRes include:
• Commercial grade and performance in a value-packaged trim and finish mower. • Simpledesignformaximumbalanceandeaseof
maneuverability. • Groundspeedsfrom0.0to4.2mph. • 5"-deepcuttingdeckprovidesExmark® signature cut and
superior performance whether bagging or mulching. • Easyon/offbagdesigneliminatestheneedforleversand
doors. • Frontheightadjustandsingle-pointrearheightadjust
allows for easy handling and change in cutting height. • 2-quartintegralfueltank. See Page 132 foR exmaRk® waRRanty DetailS
engine – FJ180V Kawasaki KAI engine governed to 3,300 rpm.engine deck – 5"-deep, 1/4"-thick die-cast aluminum.drive system – Hand-push (ECSKAP21). Self-propelled; rear-wheel, gear-driven (ECSKA21).transmission – Infinitely variable speed selection, dual wheel drive.speed – 0 to 4.2 mph (6.4 kmph) forward on self-propelled model.speed control – Fingertip control.cutting deck – 21" (53.3 cm).cutting Height – 1.0" (2.5 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.Fuel capacity – 2 quart integral fuel tankBag capacity – 2.5 bushels (20 gallons).drive tires – 9" x 2.5", semi-pneumatic.Blades – 1-20.5" blade. Blade-tip speed – Approximately 18,500 fpm.safety package – Zone start
1 Gallon Tank Kit ............................................................ 109-9333Coated Bail OPC/BBC ................................................... 109-8442Coated Bail Drive ........................................................... 109-8443Deck Wear Kit ..................................................................109-9329Door Handle Kit ..............................................................109-9326Engine Guard ..................................................................116-05229.5" Diameter Tire Kit .....................................................109-9328Mulch Plug .......................................................................116-0251Wheel Weight Kit ............................................................109-9331
For more information on Accessories see page 96-113
COM
MERCIA
L 21 S-SERIESCOM
MER
CIA
L 21
S-S
ERIE
Smodelnumber
lengthwith handle
Heightwith handleengine size controls weight width price
ECSKAP21 FJ180V Kawasaki® KAI 21" Push Zone 107 lbs 62.0" 38.0" 22.0" $
ECSKA21 FJ180V Kawasaki KAI 21" Self-propelled Zone 112 lbs 62.0" 38.0" 22.0" $
Blades - material is 0.135" thick alloy steel austempered to RC 38-44 FRont wHeels dRiVe wHeels
Bagging Low-Lift Extreme 2 Mulching Medium Lift/Mulch (standard) 9" (standard) 9.5" 9" (standard) 9.5"
108-3759-03 108-3762-03 108-0954-03 116-5005 116-4500 109-8016 109-8026 109-8032 109-8022
Belts caBles
Drive Zone (Kawasaki) Drive
109-7299 116-0905 116-0904
Pow
er C
ompo
nent
s, D
ecks
, Equ
ipm
ent
Key
Feat
ures
Acc
esso
ries
8988
24" AERATO
R X-SERIES21"
AER
ATO
R S-
SERI
ESmodelnumber engine size price
ARS180KA21 FJ180V Kawasaki® KAI 21" $
weight length Height width
320 lbs (handle folded) 48" (handle folded) 38" 30"includes one (handle up) 58" (handle up) 46"30 lb wt
Key
Feat
ures Powered by FJ180V Kawasaki KAI series engine.
additional FeatuRes include: • Easytousecontrols-Intuitiveoperation. • Optionalremovablesuitcaseweights.One30lb.weight is standard and three additional 30 lb. weights are optional (one front and two rear weights). • Loweffortmaneuverabilityascomparedtocompetitive offerings. • Splittineshaftwithindependentidlersforeasierturning with tines engaged. • Self-cleaningtines. • Foldinghandle. • Singlebailtractioncontrol. • Easytoreplacetines. • Levercontroltineengagement. • 1-yearlimitedwarranty. See Page 132 foR exmaRk® waRRanty DetailS.
engine – FJ180V Kawasaki KAI recoil start.Fuel capacity – 1 gallon (3.8-L).working width – 21"Rear tires – 10 x 2.75-5.5 solid.Front tires – 11 x 4-4.transmission – Hydro-Gear® T2.drive – #40 chain.# of tines – 36 coring tines.core depth – 2" to 3".aerating speed – 4.0 mph.plugs/square foot – 4.6.
Spec
smodelnumber engine size price
ARX340HN24 GXV 340 Honda® 24" $
weight length Height width
TBA 59" 49" 36"
Key
Feat
ures Powered by GXV 340 Honda engine.
additional FeatuRes include:
• Easytousecontrols-Intuitiveoperation. • Removablesuitcaseweights.Includestwo30lb.weights. • Loweffortmaneuverabilityascomparedtocompetitive offerings. • Split tine shaft with independent idlers for easier turning with tines engaged. • Self-cleaningtines. • Easytoreplacetines. • Levercontroltineengagement. • 1-yearlimitedwarranty. See Page 132 foR exmaRk® waRRanty DetailS
engine – GXV 340 Honda recoil start engine.Fuel capacity – 1-gallon (3.8-L).working width – 24"Rear tires – 13 x 6.0-6.Front tires – 9 x 3.5-4 semi-pneumatic casters.transmission – Hydro-Gear® EZT.drive – #40 chain.# of tines – 36 coring tines.core depth – 2" to 4".aerating speed – 6.5 mph.plugs/square foot – 4.0.
Spec
s
9190
20" SLICER SEEDER
30"
STA
ND
-ON
AER
ATO
R modelnumber engine size price
SAR481KA30 FS481V Kawasaki® 30" $
weight length Height width
1015 lbs 65" 53" 48"
Key
Feat
ures Powered by FS481V Kawasaki engine.
additional FeatuRes include:
• Easytousecontrols-Intuitiveoperation. • Weightdirectlyovertinestomaximizecoredepth. • Compactsizeascomparedtocompetitiveofferings. • Splittinesforeasierturningwithtinesengaged. • Self-cleaningtines. • Easytoreplacetines. • Footpedalfortineengagement. • Tinedown-forcehydraulicactuated(alsoadjustable). • 1-yearlimitedwarranty. See Page 132 foR exmaRk® waRRanty DetailS
engine – FS481V Kawasaki electric start engine.Fuel capacity – 5 gallons (18.9-L).working width – 30"Rear tires – 16 x 6.50-8Front tires – 13 x 5-6 semi-pneumatic casterstransmission – Hydro-Gear® ZT3400drive – #50 chain# of tines – 48 coring tinescore depth – 2" to 5".aerating speed – 7.0 mph.plugs/square foot – 4.6.
Spec
smodelnumber engine size price
SD270HN20 Honda® GX270 20" $
weight length Height width
260 lbs (handle folded) 27" (handle folded) 28" 30" (handle up) 52" (handle up) 45"
Key
Feat
ures Powered by Honda GX270 engine.
additional FeatuRes include:
• Easytomaneuverandoperate. • Thewidestablebasedeliversgoodsidehillstabilityand even cutting Verticutting reel. • Integratedlifthandlesandfoldablehandlesimprove transport and storage. • Blades-Increaseseed/soilcontact,removesthatch,and high-carbon steel for improved durability. • Seedmixerisregulatedbygroundspeedforeven distribution. • 1-yearlimitedwarranty. See Page 132 foR exmaRk® waRRanty DetailS
engine – Honda GX270 engine.Fuel capacity – 5.6 quarts (5.3-L).clutch – Noram mechanical MC40Btires – 11 x 4-4cutting depth – Adjustable up to 1" deepseeding / slicing width – 20"Hopper size – 40 lbs.
Spec
s
9392
STUM
PGRIN
DER18
" TU
RF R
AK
Emodelnumber engine size price
TR160HN18 Honda® GX160 18" $
weight length Height width
125 lbs (handle folded) 27" (handle folded) 23" 28" (handle up) 43" (handle up) 39"
Key
Feat
ures Powered by GX160 Honda engine.
additional FeatuRes include: • Easytouse-Lightweight,intuitiveoperatingpowerrake
with on-handle throttle for quick speed adjustment. • Thatchremoval-The24flailbladesremoveheavythatch bringing increased oxygen and sunlight to the turf. • Thecentrifugalclutcheliminatesnoiseandmaintenance of belt tensioners. • Simplefoldinghandle. • 1-yearlimitedwarranty.See Page 132 foR exmaRk® waRRanty DetailS
engine – GX160 Honda recoil start engine.Fuel capacity – 3.3 quarts (3.1-L).operating width – 18" (32 flail blades on 1" spaces).Blades – Hardened high-carbon steel.clutch – Centrifugal clutch.tires – 10 x 2.75-5.5 solid
Spec
smodelnumber engine price
SG200HN Honda® GX200 $
weight length Height width
110 lbs 50" 42.3" 22"
Powered by GX200 and GX390 Honda engines.
additional FeatuRes include: • 4lifthandlestoloadandunloadintovehicle. • GreatBalanceandRubbergasketstranslatetosmooth operation that does not "pull" operator into the stump as it is being cut. • 9.5"Quadra-blade,12-tipscutsmoothlylikearouterand does not beat on the stump. • Reliability-BladeSharpeningServicekeepsteethsharp, extends life of machine and increases customer satisfaction on the job. • Bladecanbeaccessedeasilywith2-9/16wrenchesand 8-bolt removal for quick change cut. • HandlefoldsdownonSG200HNmodel. • 1-yearlimitedwarranty.See Page 132 foR exmaRk® waRRanty DetailS
engine – Honda GX200 engine.Belt – Cogged belt.clutch – Centrifugal.cutting depth – 6" below grade.cutting Height – 10" above grade.cutting wheel – 9.5"-diameter (12-tooth).
SG20
0HN
Ke
y Fe
atur
es
modelnumber engine price
SG390HN Honda® GX390 $
weight length Height width
240 lbs 76" 42" 29.5"
engine – Honda GX390 engine.Belt – Double 3V belt.clutch – Centrifugal.cutting depth – 11" below grade.cutting Height – 14" above grade.cutting wheel – 9.5"-diameter (12-tooth).
SG39
0HN
9594
RID
ER &
STAN
D-O
N A
CC
ESSOR
IESRID
ER &
STA
ND
-ON
AC
CES
SOR
IES
Pro
duc
t
Mod
el #
Mul
ch K
it
Ult
raV
ac
(Nee
ds U
V D
rive
Kit
)
Stri
per
Lig
ht K
it
Hit
ch K
it
Sun
Shad
e
OC
D
Jack
& R
ecei
ver
Eq
uip
men
t C
over
Tras
h C
onta
iner
Cus
tom
Rid
e Su
spen
sion
Sea
tFu
ll-Su
spen
sion
Se
at3-
D M
otio
n
Isol
atio
n Sy
stem
Ext
end
ed D
rive
r Le
ver
Kit
12 V
olt
Pow
er
Ad
apte
rH
ydro
Mai
nten
ance
K
it3-
Bus
hel S
ide
Cat
cher
Pow
er D
eck
Lift
3-B
ushe
l Ad
apte
r
Non
-Pow
ered
B
agg
er
Fill
Red
ucti
on K
it
Snow
Bla
de
Snow
Blo
wer
Dua
l Tai
l Whe
el
Rem
ovab
le D
ump
Tub
Kit
Hou
rmet
er K
it
Fron
t W
eig
ht S
et
Ant
i-Sca
lp R
olle
r K
it
Lazer® Z DS-Series
LZDS902K605 • • • • • • • • •LZDS902K725 • • • • • • • •
Lazer Z X-Series
LZX680KC486 • • • • • • • • • • • • • • • • •LZX740KC526 • • • • • • • • • • • • • • • • •LZX740KC606 • • • • • • • • • • • • • • • • •LZX749EKC606 • • • • • • • • • • • • • • • • • •LZX801KA606 • • • • • • • • • • • • • • • • • •LZX801KA606SS • • • • • • • • • • • • • • • • • •LZX940KC606 • • • • • • • • • • • • • • • • • •LZX940KC726 • • • • • • • • • • • • • • • •LZX980KC606 • • • • • • • • • • • • • • • • • •LZX980KC726 • • • • • • • • • • • • • • • •
Lazer Z S-Series
LZS651KA484 • • • • • • • • • • • • • • • • • •LZS680KC524 • • • • • • • • • • • • • • • • • •LZS730EKC604 • • • • • • • • • • • • • • • • • • •LZS740KC524 • • • • • • • • • • • • • • • • • •LZS740KC604 • • • • • • • • • • • • • • • • • • •LZS749EKC724 • • • • • • • • • • • • • • • • •LZS801KA724 • • • • • • • • • • • • • • • • •LZS801PKA604 • • • • • • • • • • • • • • • • • • •LZS801PKA724 • • • • • • • • • • • • • • • • •
Lazer Z E-Series
LZE600KA484 • • • • • • • • • • • • • • • • • •LZE691KA524 • • • • • • • • • • • • • • • • • •LZE740KC604 • • • • • • • • • • • • • • • • • • •
Navigator®
NAV640KC • • • • • • •NAV730EKC • • • • • • •NV740KC • • • • • • •CD42CD • •CD48CD • •
Pioneer® S-Series
PNS600KA443 • • • • • • • • • • •PNS651KA483 • • • • • • • • • • •PNS680KC523 • • • • • • • • • • •PNS740KC604 • • • • • • • • • • •
Pioneer E-Series
PNE651KA482 • • • • • • • • • •PNE691KA522 • • • • • • • • • •
Quest®
S-Series QTS691KA501 • • • • • •
QuestE-Series
QTE651KA421 • • • • • • •QTE691KA501 • • • • • • •
Vantage®
VT541KA363 • • • • • • • • • • •VT651KA484 • • • • • • • • • •VT691KA524 • • • • • • • • • •VT730EKC524 • • • • • • • • • •VT740EKC604 • • • • • • • • •
9796
WA
LK-B
EHIN
D A
CC
ESSOR
IESWA
LK-B
EHIN
D A
CC
ESSO
RIE
S
Pro
duc
t
Mod
el #
Mul
ch K
it
3-B
ushe
l Bag
ger
OC
D
Eq
uip
men
t C
over
Wal
k-B
ehin
d W
eig
ht S
et
Stan
dO
n
Stri
per
ECS
Han
dle
Kit
Sid
e-D
isch
arg
e K
it
Whe
el W
eig
ht K
it
9.5"
Dia
met
er
Tire
Kit
Mul
ch P
lug
Eng
ine
Gua
rd
Dec
k W
ear
Kit
One
Gal
lon
Tank
Kit
Doo
r H
and
le K
it
Coa
ted
Bai
l
Turf Tracer® X-Series
TTX640KCE524 • • • • • •
TTX640KCE604 • • • • • •
TTX650EKCE524 • • • • • •
TTX650EKCE604 • • • • • •
TTX691KAE524 • • • • • •
TTX691KAE604 • • • • • •
TTX691PKAE524 • • • • • •TTX691PKAE604 • • • • • •
Turf Tracer S-Series
TTS481KA363 • • • • • • •
TTS481KA483 • • • • • • •
TTS541KA523 • • • • • • •
TTS600KAE483 • • • • • • •
TTS600KAE523 • • • • • • •
TTS600PKAE483 • • • • • • •
Viking™VH481KA362 • • • • • •
VH481KA483 • • • • • •
Metro®
MG481KA362 • • • •
MG481KA483 • • • •
MG481KA322P • • • • •
MG481KA362P • • • • •
MG481KA483P • • • • •
Metro 26 MSKABBC26 • •
Commercial 21 X-Series
ECXKA21 • •
ECXKABBC21 • •
ECXHN21 • •
ECXHNBBC21 • •
Commercial 21 S-Series
ECSKAP21 • • • • • • •
ECSKA21 • • • • • • •
9998
OPER
ATO
R C
OM
FOR
TOPE
RA
TOR
CO
MFO
RT
Full-suspension seatDesigned to fit all Lazer models, this low-profile package, Full-Suspension seat enhances operator comfort and lumbar support by adjusting to individual weight and preferred seat-back angle. Includes seat belt.
model # application
116-7234 Fits all Lazer Z models with S/N 790,000 & above.
116-4678 Fits Pioneer models.
tilt FRame & 3-d isolation system KitGet full-featured Lazer comfort for your Lazer AS by adding the Tilt Frame & 3-D
Isolation System. Designed for ease of maintenance access, the tilt feature maintains a low-profile on four independent isolation mounts to smooth your ride.
Model # application
116-0941 Fits Lazer Z Series, Lazer Z and Lazer Z ASX models with S/N 790,000 & above. Fits Lazer Z AS S/N 790,000 to 849,999.
lazer z s-series operator comfort
Good Standard
Better Tilt Frame & 3-D Isolation System Kit
Best Full-Suspension Seat w/ Tilt Frame & 3-D Isolation System Kit
lazer z X-series operator comfort
Good Standard
Better CustomRide Seat Suspension System
Best Full-Suspension Seat
Enhance your Lazer ride with a comprehensive set of operator comfort options. Standard Lazer seats give the operator a good, reliable ride. Now, optional components enable you to increase your comfort level even more.
The Lazer Z S-Series Tilt Frame & 3-Dimensional Isolation System give you full-featured comfort in an affordable package. The CustomRide Seat Suspension delivers comfort enhancement on both the Lazer S-Series and Lazer X-Series. And for the smoothest ride in the industry, Exmark's Premium Suspension Seat is now available for either platform.
A great value in comparison to more expensive full-suspension seats, our CustomRide suspension system easily mounts to your existing EVC operator seat. System features enable operator to customize
suspension settings per individual's weight and personal preference.
model # application
116-0062 Fits all Lazer Z models with S/N 790,000 & above except Diesel, LZE and LZA models.
103-4754 Fits all Lazer Z,® CT, HP, AS with S/N
below 790,000.
Full-suspension seatThis low-profile, Full-Suspension seat enhances operator comfort and lumbar support by adjusting to individual weight and preferred seat-back angle. Includes seat belt.
model # application
LSSEAT Fits all Lazer Z with S/N below 790,000.
101100
AC
CESSO
RIES &
ATTA
CH
MEN
TSA
CC
ESSO
RIE
S &
ATT
AC
HM
ENTS 12-Volt poweR
adapteRConveniently located for ease of use. Great for phone chargers, or any other operator comfort accessory.
model # application
109-9694 Fits all Lazer Z models with S/N 790,000 & above except Diesel models. HitcH Kits
Enables owners to add attachments to their full-size Next Lazer Z models. 80 lb. capacity increases productivity by towing light implements and yard carts.
model # application
109-9487 Fits all Lazer Z Series models with S/N 790,000 & above except diesel models.
1-631665 Both Lazer Z models and Lazer Z AS with S/N below 790,000.
1-651234 Lazer Z HP and Lazer Z CT S/N 510,000 and above models.
103-9565 All Lazer Z DS-Series, D-Series, XS & XP models.
109-6245 Pioneer S- and E-Series
eXtended dRiVeR leVeR KitImprove your elbow room while you operate with extended drive levers.
model # application
116-1065 Fits Lazer Z models with S/N 790,000 & above. Does not fit Lazer Z D or DS-Series.
HydRo maintenance KitIncludes 4 bottles of Exmark premium hydraulic oil, 1 belt and 2 hydro filters.
model # application
116-3270 For use with Lazer Z X-Series & Lazer Z S-Series Lazer Z (LZZ) with (790,000 & above) Lazer Z Advantage Series X (LZAS 850,000 to 919,999) Lazer Z Advantage Series (LZAS 790,000 to 849,999)
116-3282 For use with Lazer Z E-Series Lazer Z Advantage Series (LZA) with (850,000 & above)
eQuipment coVeRProtect your zero-turn mower from the elements with this sturdy, waterproof cover. It's constructed out of tough 600-denier polyester, making it abrasion and tear resistant. It's elastic opening provides a secure, snug fit.
model # application
116-1378 Small - Fits Quest and Phazer units.116-1379 Large - Fits Lazer Z & all other units excluding
72" decks and Navigator models.
anti-scalp RolleR KitsProvides maximum protection from scalping in tough terrain.
model # application
116-4607 Fits Lazer Z X-Series & Lazer Z S-Series 72" decks.
116-4614 Fits Lazer Z X-Series & Lazer Z S-Series 60" decks.
116-4616 Fits Turf Tracer 52" & 60" decks.
116-5305 Fits Vantage 36" unit - right front corner
116-4608 Fits Vantage 48" & 52" units - front of deck
116-4614 Fits Vantage 60" unit - left rear corner
103102
AC
CESSO
RIES &
ATTA
CH
MEN
TSAC
CES
SOR
IES
& A
TTA
CH
MEN
TSJacK & ReceiVeRSafely and easily access the underside of your zero-turn mower's deck. Once receiver is mounted to frame, jack attaches for smooth lift without hassle or strain, thanks to the comfortable ergonomic design. Built for years of reliability.
model # application
116-1049 Receiver - Fits Lazer Z X- and S-Series models with S/N 790,000 & above.116-5701 Receiver - Fits Lazer Z E-Series with S/N 920,00 & above and Lazer Z Advantage with S/N 850,000 to 919,999.116-1571 Receiver - Fits Lazer Z DS-Series and Pioneer S- and E-Series, and Lazer Z with S/N 790,000 & below116-4414 Receiver - Fits Vantage 36"116-3300 Receiver - Fits Vantage 48," 52" & 60"116-1563 Receiver - Fits Quest SP and Quest with S/N
790,000 to 919,999116-1351 Jack - Fits Lazer Z models with S/N 790,000 & above.
liGHt KitKeep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella™ Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact and can even take on high-pressure cleaning. With twice the illumination output of a conventional
work lamp. The kit also features a pivot base and easy bulb replacement.
model # application
116-1154 Fits all Lazer Z and Pioneer models with ROPs with S/N 260,000 and above.
103-7745 Replacement Bulb Kit (one bulb).
NAVLKIT Fits all Navigator models.
pRemium enGine oilUsing a synthetic formulation far more stable and robust than inexpensive oil from your local auto parts store or big retail outlet. Exmark premium is the right choice for your mower.
model # application
116-3373 Quart bottle
116-3374 55-gallon drum
pRemium Fuel tReatmentEngineered to rapidly dissolve carbon & varnish deposits. Quickly cleans injectors, rings, carburetor, valves and fuel line. One treatment delivers immediate results for older engines. Regular use helps engines last longer at peak performance. E10 Ethanol approved.
model # application
116-5991 8 oz. bottle
116-5992 16 oz. bottle
pRemium HydRo oilDesigned for today's more demanding hydraulic systems to enhance control performance. Delivers superior anti-wear protection and twice the shear stability of competing oils. For use with any Exmark hydraulic system.
model # application
109-9828 Quart bottle
116-1218 Gallon container
105104
AC
CESSO
RIES &
ATTA
CH
MEN
TSAC
CES
SOR
IES
& A
TTA
CH
MEN
TS
tRasH containeRConveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and a durable, easy-to-clean mesh receptacle.
model # application
TC26 Fits all Lazer Z models.
116-3297 Fits Vantage models.
sun sHadeEasily mounts to 2-post foldable Rollover Protection System (ROPS). Made of heavy-duty, water repellent canvas for maximum durability. Quickly and easily removable for transport. Fits all Exmark compact and full-size Lazer Z mid-mount mowers and FrontRunner. Does not
fit Quest.
model # application
116-0513 Fits any Exmark model with ROPS.opeRatoR contRolled
discHaRGeInnovative foot control delivers greater productivity than traditional hand-operated designs. The blocker door opens and closes allowing user to quickly and effectively control discharge when mowing around mulch beds, parked cars, homes or windows. (Infinitely adjustable blocker door.) Easily installs and removes without tools.
model # application
OCD02 Fits all Lazer Z® UltraCut™ Series 4 & 6 models. with S/N 790,000 & above.OCDWB01 Fits Vantage 36," 48" & 52" and wide area walks.
116-4248 Required for Vantage 36" fit-up
poweR decK liFtChange your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. It's electronic motor features Exmark's signature durability and a low profile design that leaves plenty of trailer space.
model # application
116-2517 Fits all 48" - 72" Lazer Z models with S/N 850,000 & above. micRo-mulcH
systemThe aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.
model # application
See page 124-125
non-poweRed BaGGeRGreat for fall and spring clean as well as day-to-day collection of grass clippings. This optional, 2-bag system features a 6-bushel collection capacity. After original mounting, the system attaches and detaches quickly and easily without the use of tools.
model # application
116-5000 Pioneer E-Series models.116-6512 50" Quest S-Series116-4764 42" Quest E-Series116-4765 50" Quest E-Series
107106
AC
CESSO
RIES &
ATTA
CH
MEN
TSAC
CES
SOR
IES
& A
TTA
CH
MEN
TStuRF stRipinG Kit
Exmark® has an unmatched reputation for delivering its see-it-to-believe-it quality of cut. Now you can enhance the striping performance and produce beautifully manicured lawns with this durable and easy-to-use roller system.
• Allowsyoutomowand roll at the same time.
• Constructedofheavy-dutystainlesssteel.• Easilyadjustsforvaryingcutting-heightsettings.• Doesnotaffectabilitytogetupandovercurbs.• Easytoserviceandmaintain.
part number turf striping Kit accessory
STRFMDFor all FMD 523, 524, 603, 604 decks on Turf Tracer Hydros-TTX (excludes Turf Ranger®).
STRLZ52For all full-size 52" Lazer Z models (523 and 524 decks).
STRLZ60For all full-size 60" Lazer Z, Lazer Z ASX, Lazer Z AS models and Lazer Z® CT 60" (603 and 604 decks) (excludes XP’s & XS’s).
STRLZ60XP For all 60" Lazer Z XS and XP models.
STRLZ72For all 72" full-size Lazer Z, Lazer Z ASX, Lazer Z XS and Lazer Z XP models (724 decks).
STRHPW36 For all 36" TTHP/TTS models.
STRHPW48 For all 48" and 52" TTHP/TTS models.
STRLHP5 For all 46", 50" and 56" Series 5 cutting decks.
STR605 For all 60" Series 5 cutting decks.
STR665-725 For all 66" and 72” Series 5 cutting decks.
120-7905For Quest E-Series. Quest units with S/N 920,000 to 999,999.
tuRF stRipinG KitProduce beautifully manicured lawns with this durable and easy-to-use roller system. Roller now made with high impact, high density polyethylene. No more costly bearings to maintain. Easy height adjustment.
model # application
109-5081 Fits 48," 52" & 60" Lazer Z decks with S/N 790,000 & above. 116-6657 Striper Extender Kit for 109-5081.
109-5080 Fits 72" Lazer Z decks with S/N 790,000 & above.116-6658 Striper Extender Kit for 109-5080.
116-6655 Fits 48," 52" & 60" Lazer Z decks with S/N 790,000 & above. Vertical height adjustment and extension rollers on ends.
116-6656 Fits 72" Lazer Z decks with S/N 790,000 & above. Vertical height adjustment and extension rollers on ends.
116-5297 Fits Pioneer S-Series
116-5084 Vantage 36"
116-5320 Vantage 48," 52" & 60"
109108
AC
CESSO
RIES &
ATTA
CH
MEN
TSAC
CES
SOR
IES
& A
TTA
CH
MEN
TS
naViGatoR dump tuBsDebris can be quickly and conveniently managed with our two polyethylene tub inserts. These removable tubs enable the weight of a full, 9.5-bushel hopper to be split
and unloaded one tub at a time.
model # application
116-1429 Fits all Navigator models.
ultRaVac systemsUltraVac collection systems make it even easier for you to maximize your productivity. Quick-attach design enables easy switching from bagging to side-discharge, without tools, in minutes.
model # application
See page 114-121.
naViGatoR snow BloweRConstructed of lasting 12- and 16-gauge steel, this heavy-duty, two-stage blower attachment features a 4-blade impeller. Blower controls and the rotational chute are easily maneuvered from the operator’s position. Requires Quick Hitch Attachment System and attaches without tools.
model # application
NAVBLWR44 Fits all Navigator models
naViGatoR® BladeFeaturing a 48" width, the snow blade can be angled 20° either right or left. It utilizes a ground scraper constructed of carbon steel that is reversible, to double its productivity. Requires Quick Hitch Attachment System and attaches without tools.
model # application
NAVSBLD48 Fits all Navigator models
naViGatoR QuicK HitcH attacHment systemThis durable hitch system replaces the out-front mowing deck without tools and makes it easy to connect or remove attachments. To enhance
in-use productivity, blower or blade attachment can be raised or lowered from operator position.
model # application
NAVSUBFRM01 Fits all Navigator models
naViGatoR Fill Reduction KitManage clippings between partial mulch and bagging operations. Reduce material collection by 50%.
model # application
109-5458 Fits all Navigator models. Standard on 670,000 & above models.
naViGatoR auto dooR KitEnhance your productivity with this quick opening auto door system.
model # application
109-5459 Fits all Navigator models.
111110
AC
CESSO
RIES &
ATTA
CH
MEN
TSAC
CES
SOR
IES
& A
TTA
CH
MEN
TS
standonIncrease productivity while reducing work load with this pull-behind sulky. Uses an innovative QuikMount system and convenient, spring-loaded latch. Expanded operator deck with foot guard for safer, more comfortable riding.
model # STANDON
walK-BeHind weiGHt setAdd weight to the front end of your Exmark walk-behind. Beneficial for use with Exmark StandOn to enhance stability and control. Comes in pairs. Each weighs 9.5 pounds. Excludes Turf Tracer X-Series
models.model # 103-2637
3-BusHel BaGGeRLightweight and easy to attach, this three-bushel grass bagger fits all Exmark® side-discharge walk-behind and riding mowers. Exclude Commercial 21," Metro® 26" & Phazer.™
model # application
GC3602 Fits Lazer Z X-, S-, E-Series, Pioneer S-Series and Vantage.
(VT36 requires adapter 116-4248)
116-4248 Required for Vantage 36" fit-up.
GC36MC Fits all wide area walks excluding Phazer.
116-4091 Applies only to the GC36MC. This adapter is needed for Vantage, Lazer Z s/n 600,00 and above, Pioneer, Quest SP, & Quest s/n 919,999 & below.
metRo 26 sidediscHaRGe KitQuickly change your Metro 26 from rear bagging to side discharge.
model # application
109-4800 Fits Metro 26
metRo 26 mulcH KitEasily transition from bagging to mulching.
model # application
MK26 Fits Metro 26
113112
AC
CESSO
RIES &
ATTA
CH
MEN
TSAC
CES
SOR
IES
& A
TTA
CH
MEN
TS
commeRcial 21 enGine GuaRd
Protect your engine from impact when mowing around low-hanging branches and other obstacles.
model # application
116-0522 Fits all Commercial 21's .
commeRcial 21 mulcH pluGEasily transition from bagging to mulching.
model # application
116-0251 Fits all Commercial 21's.
commeRcial 21 Gas tanKMaximize your mowing with increased fuel capacity. The 1-gallon gas tank fits easily onto your engine to provide optimum productivity.
model # application
109-9333 Fits all Commercial 21's.
commeRcial 21 9.5" diameteR wHeels
For extended cut height, tough terrain or when lowered rolling resistance is needed, this larger-diameter wheel kit improves your productivity.
model # application
109-9328 Fits all Commercial 21's.
commeRcial 21 wHeel weiGHt KitEnhance your productivity in wet conditions with this wheel weight kit. Each wheel plate weights 3 pounds to give you excellent performance, even with a full load of grass.
model # application
109-9331 Fits all Commercial 21's.
commeRcial 21 decK weaR Kit
Prolong the life of your deck in the toughest conditions with this heavy-duty deck wear kit.
model # application
109-9329 Fits all Commercial 21's.
115114
flexibility• Exmark®-engineered collection system, designed
exclusively to fit Exmark zero-turn riders.• Exmark’s Quick-Attach design allows for installation and
removal in under a minute, easily switching from bagging to side-discharge without tools.
• Compact design minimizes trailering space and lets you easily maneuver around obstacles.
• Preciselybalancedtomaintainexceptionalstability.
low Cost, low maintenance• With no auxiliary engine, the UltraVac® runs quietly and
dependably with minimal maintenance.• Unique impeller design creates high-velocity airflow and
improved collection-system performance.• Large-diameter, smooth-discharge tube handles large
volumes of debris with less clogging.• Abrasion-resistant steel blower housing and impeller
maximize blower life.• Debris-bypass impeller design reduces horsepower draw
and clogging.
Productivity• Commercial-grade cloth mesh maximizes airflow and
debris compaction—you’ll collect more debris per bushel for increased capacity.
• Lightweight bags with polyethylene bottoms mount simply for fast, easy emptying.
• Grass discharge from the QDS is accomplished in one simple motion of the release handle.
• Sealed hood reduce dust around engine and operator.• Current production unit applications listed. Exmark
offers an UltraVac to fit virtually every zero turn rider model. Consult the on-line accessory look up for older applications not listed here: www.exmark.com
* Since bagging normally requires more horsepower than side-discharge operation, depending on cutting conditions, higher-horsepower models may provide more efficient bagging capability.
ULT
RA
VAC
® S
PEC
S ULTRAVA
C E-SERIES & S-SERIES SPEC
SULT
RAVA
C E-
SERI
ES &
S-S
ERIE
S SP
ECS 2-bagger option
S-Series Bagger (lZUV2B)For all full-size 48" and 52" Lazer Z models with s/n 790,000 & above.
e-Series Bagger (116-3000) For all Pioneer S-Series models except 60".(116-3001) For all Pioneer S-Series models.
s-series (lzuV2B) e-series (116-3001)
lazer z 52"
lazer z 48"
pns 48"
pns 52"
Overall unit length with bagger
102.25"(259.7 cm)
102.25"(259.7 cm)
97.0"(246.4 cm)
97.0"(246.4 cm)
Overall unit width with bagger
67.75"(172.1 cm)
62.50"(158.8 cm)
58.0"(147.3 cm)
62.0"(157.5 cm)
Total bagging system weight
266 lbs(120 kg)
309 lbs(140 kg)
168 lbs(76 kg)
168 lbs(76 kg)
collection Bags – 2 commercial-grade, cloth-mesh bags with reinforced bottoms.total collection capacity – 8 bushels.dump mechanism – Manual lift off.Blower tube – 6.0"-diameter, fixed, abrasion-resistant, molded polyethylene.impeller – 5-bladed, 1/4" (6.4mm) thick, abrasion-resistant steel with vertical axis. 13.0" diameter.impeller axis – Vertical.impeller Housing – S-Series - 0.187" thick, abrasion-resistant steel.E-Series - 0.135" thick, steel.Bearings – 1" (2.54 cm) sealed, non-greaseable bearings.
3-bagger option(lzuV3B) For all full-size 60" & 72" Lazer Z models except diesel with s/n 790,000 & above.
(uV60 and uV6672) For all full-size 60" & 72" Lazer Z Diesel models.
(lzuV3B) uV60 uV6672
lazer z 60"
lazer z 72"
lazer z (diesel)
60"
lazer z (diesel)
72"
Overall unit length with bagger
107.0"(271.8 cm)
110.0"(279.4 cm)
110.9"(281.6 cm)
115.4"(293 cm)
Overall unit width with bagger
74.9"(190.3 cm)
87.4"(221.9 cm)
74.9"(190.3 cm)
87.4"(221.9 cm)
Total bagging system weight
449 lbs(204 kg)
406 lbs(184 kg)
261 lbs(118 kg)
268 lbs(122 kg)
collection Bags – 3 commercial-grade, cloth-mesh bags with reinforced bottoms.total collection capacity – 13.4 bushels (3 bags and hood).dump mechanism – Manual dump from seat.Blower tube – 7.75"-diameter, fixed, abrasion-resistant polyethylene.impeller – 5-bladed, abrasion-resistant steel with vertical axis. 15.0" diameter.impeller axis – Vertical.impeller Housing – 0.187" thick, abrasion-resistant steel.Bearings – 1" (2.54 cm) sealed, non-greaseable bearings.
117116
flexibility• Exmark®-engineered collection system, designed
exclusively to fit Exmark zero-turn riders.• Exmark’s Quick-Attach design allows for installation and
removal in under a minute, easily switching from bagging to side-discharge without tools.
• Compact design minimizes trailering space and lets you easily maneuver around obstacles.
• Preciselybalancedtomaintainexceptionalstability.
low Cost, low maintenance• With no auxiliary engine, the UltraVac® runs quietly and
dependably with minimal maintenance.• Unique impeller design creates high-velocity airflow and
improved collection-system performance.• Large-diameter, smooth-discharge tube handles large
volumes of debris with less clogging.• Abrasion-resistant steel blower housing and impeller
maximize blower life.• Debris-bypass impeller design reduces horsepower draw
and clogging.
Productivity• Commercial-grade cloth mesh maximizes airflow and
debris compaction—you’ll collect more debris per bushel for increased capacity.
• Lightweight bags with polyethylene bottoms mount simply for fast, easy emptying.
• Grass discharge from the QDS is accomplished in one simple motion of the release handle.
• Sealed hood reduce dust around engine and operator.• Current production unit applications listed. Exmark
offers an UltraVac to fit virtually every zero turn rider model. Consult the on-line accessory look up for older applications not listed here: www.exmark.com
* Since bagging normally requires more horsepower than side-discharge operation, depending on cutting conditions, higher-horsepower models may provide more efficient bagging capability.
ULT
RA
VAC
® S
PEC
S ULTRAVA
C X-SERIES SPECS
ULT
RAVA
C X-
SERI
ES S
PEC
S ULtraVaC QUiCK DisposaL sYsteM (lzuVQd7)
For all full-size 48" and 52" Lazer Z models with s/n 790,000 & above.
lazer z 48"
lazer z 52"
Overall unit length with bagger
102.0"(259.1 cm)
102.0"(259.1 cm)
Overall unit width with bagger
62.50"(158.8 cm)
67.75"(172.1 cm)
Total bagging system weight
331 lbs(150 kg)
288 lbs(130 kg)
collection Hopper – Commercial-grade steel and polyethylene.total collection capacity – 7 bushels.dump mechanism – Manual dump from seat.Blower tube –6.0"-diameter, fixed, abrasion-resistant, molded polyethylene.impeller – 5-bladed, 1/4" (6.4 mm) thick, abrasion-resistant steel with vertical axis. 13.0" diameter.impeller axis – Vertical.impeller Housing – 0.187" thick, abrasion-resistant steel.Bearings – 1" (2.54 cm) sealed, non-greaseable bearings.
ULtraVaC QUiCK DisposaL sYsteMlzuVQd11For all full-size 60" & 72" Lazer Z models except diesel with s/n 790,000 & above.
uVd60 and uVd6672For all full-size 60" & 72" Lazer Z Diesel models.
lzuVQd11 uVd60 uVd6672
lazer z 60"
lazer z 72"
lazer z (diesel)
60"
lazer z (diesel)
72"
Overall unit length with bagger
106.5"(270.5 cm)
109.5"(286.2 cm)
109.4"(278.0 cm)
113.9"(289.4 cm)
Overall unit width with bagger
75.0"(190.5 cm)
87.25"(221.6 cm)
74.9"(190.3 cm)
87.4"(221.9 cm)
Total bagging system weight
477 lbs(216 kg)
434 lbs(197 kg)
333 lbs(151 kg)
278 lbs(126 kg)
collection Hopper – Commercial-grade steel and polyethylene hopper with rear-discharge door. Commercial-grade, cloth-mesh door panel with molded lower wear panel.total collection capacity – 11 bushels.dump mechanism – Single motion actuation from operator's seat.Blower tube – 7.75"-diameter, fixed, abrasion-resistant polyethylene.impeller – 5-bladed, abrasion-resistant steel; 15.0" diameter.impeller axis – Vertical for more efficient discharge flow.impeller Housing – 0.187" thick, abrasion-resistant steel.Bearings – 1" (2.54 cm) sealed, non-greaseable bearings.
119118
ULTRAVA
C SPECSU
LTRA
VAC
SPEC
S 2-bagger option
For 42," 48" and 52" Quest models with serial #'s 919,999 & below.
Qst 42" Qst 48" Qst 52"
Overall unit length with bagger
95.0"(241.3 cm)
95.0"(241.3 cm)
95.0"(241.3 cm)
Overall unit width with bagger
52.0"(132.1 cm)
58.0"(147.3 cm)
62.0"(157.5 cm)
Total bagging system weight
125 lbs(276 kg)
125 lbs(276 kg)
125 lbs(276 kg)
total collection capacity – 6 bushels.dump mechanism – Manual lift off.Blower tube – Fixed, abrasion resistant, molded polyethylene.impeller – Noneimpeller axis – Noneimpeller Bearings – NoneBearings – None
lazer z® X-seRies(Models with LZZ or LZX Prefix) Serial #'s 790,000 & above
deck Bag style Quick dumpcompleting
Kit#
486 LZUV2B LZUVQD7 109-9623
526 LZUV2B LZUVQD7 109-9625
606 LZUV3B LZUVQD11 109-9627
726 LZUV3B LZUVQD11 109-9629
lazer z® ds-series(Models with LZDS Prefix) Serial #'s 312,000,000 & above
lazer z® d-series(Models with LZD Prefix) Serial #'s 920,000 to 999,999
lazer z® Xs(Models with LZX Prefix) Serial #'s 790,000 to 919,999
deck uV model #completing
Kit#
Floor pan
weight*
605 UV60 109-1167 109-2203*
605 UVD60 109-1167 109-2203*
665 UV6672 109-1168 109-2203*
665 UVD6672 109-1168 109-2203*
725 UV6672 109-1169 109-2203*
725 UVD6672 109-1169 109-2203*
*Floor Pan Weight is only needed on Liquid-Cooled XS Units.
ULtraVaC Fit Up
lazer z® s-series & lazer z e-series(Models with LZS & LZE Prefix) Serial #'s 920,000 & above
lazer z advantage series(Models with LZA Prefix) Serial #'s 850,000 to 919,999
deck Bag style Quick dumpcompleting
Kit#
484 LZUV2B LZUVQD7 116-2084
524 LZUV2B LZUVQD7 116-2085
604 LZUV3B LZUVQD11 116-2086
724 LZUV3B LZUVQD11 116-2087
lazer z® advantage series X(Models with LZAS Prefix) Serial #'s 850,000 to 919,999
lazer z® advantage series(Models with LZAS Prefix) Serial #'s 790,000 to 849,999
deck Bag style Quick dumpcompleting
Kit#
484 LZUV2B LZUVQD7 109-9622
524 LZUV2B LZUVQD7 109-9624
604 LZUV3B LZUVQD11 109-9626
724 LZUV3B LZUVQD11 109-9628
121120
ULTRAVA
C SPECSU
LTRA
VAC
SPEC
SultRaVac BloweR dRiVe Belts44" Drive Belt LCT, PHZ ...............................................1-65333244" Drive Belt PNS ........................................................103-086746" Series 5 Drive Belt LHP ..........................................1-65343848" Drive Belt LCT, LHP, Lazer Z 790,000 & above ....1-65333348" Drive Belt PNS ........................................................ 116-484450" Series 5 Drive Belt LHP ..........................................103-086652" Drive Belt LHP, LZ, LCT, LAS, FR ...........................1-65343852" Drive Belt PNS ........................................................1-65333356" Series 5 Drive Belt LHP ...........................................109-124260" Drive Belt LZ, LAS, FR ...........................................103-086660" Series 5 Drive Belt LZ, LXS, PNS .......................... 109-924966" Series 5 Drive Belt LZ, LXS ....................................103-086772" Drive Belt LAS, FR ..................................................103-086772" Series 5 Drive Belt LZ, LXS .....................................109-1244
Cloth Bag (LHP models) ................................................116-3518Cloth Bag (LCT models) ................................................105-6980Cloth Bag (Lazer Z models & PNS) ...............................116-0757Cloth Bag (QST, PNE) ....................................................116-1209Cloth Bag (QT, QTE, QTS) .............................................110-6674Bag and Frame Assembly (LHP models) ......................116-3519Bag and Frame Assembly (Lazer Z models & PNS) .... 116-0754Bag and Frame Assembly (LCT)....................................109-1938Bag and Frame Assembly (QST, PNE) ..........................116-1244Bag and Frame Assembly (QT, QTE, QTS) ...................112-3994
Quest® sp(Models with QSP Prefix) Serial #'s 850,000 to 919,999
deck Bag style Quick dumpcompleting
Kit#
443 116-3000 (UVE) – 116-4880
483 116-3000 (UVE) – 116-4882
523 116-3000 (UVE) – 116-4884
pioneer® s-series*(Models with PNS Prefix) Serial #'s 920,000 & Above
deck Bag style Quick dumpcompleting
Kit#
443 116-3000 (UVE) – 116-4885
483 116-3000 (UVE) – 116-4887
523 116-3000 (UVE) – 116-4889
pioneer s-series*(Models with PNS Prefix) Serial #'s 920,000 & Above
deck Bag style Quick dumpcompleting
Kit#
443 116-3001 (UVE) – 116-4885
483 116-3001 (UVE) – 116-4887
523 116-3001 (UVE) – 116-4889
604 116-3001 (UVE) – 116-6498
*The 116-3000 will fit all PNS deck sizes except 60". The 116-3001 will fit all PNS deck sizes including 60".
123122
MU
LCH
ING
HIN
TSM
ICRO
-MU
LCH
Mulching capability of Exmark mowers will be greatly enhanced by following a few simple recommendations:
1. Proper ground speed is critical to efficient mulching.
2. Blade sharpness is also vital for proper mulching. Extra blades should be available for change as necessary.
3. If mowing during the heavy growing season or mowing tall, heavy grass, mowing or crosscutting the area a second time will greatly enhance the quality of cut and evenly distribute any clumps of mulched grass left from the first pass.
4. To achieve the optimum cut with 32", 36" and 48" fixed-deck units, use three blade spacers between the blade and spindle (on models S/N 102,000 and above) or four blade spacers (on models S/N 101,999 or below).
5. Due to the fact that mulching normally requires more horsepower than side-discharge operation, depending on cutting conditions, higher-horsepower models may provide more efficient mulching capability.
Patented flow-control baffles improve the quality of cut, reduce grass and leaf blowout and lessen horsepower requirements when cutting in heavy grass.
Mulching baffles enclose each blade in an individual cutting chamber.
Series 5 mulch kits include pre-installed hardware.
Solve clipping disposal problems, and recycle valuable nutrients. Micro-Mulch accessory turns any side-discharge Exmark® into a mulching mower.
a
B
▼ the micro-mulch system is available on all exmark walk-behind and riding mowers.
a
B
125124
AC
CESSO
RIES &
ATTA
CH
MEN
TSM
ULC
H K
IT C
HA
RT
part number descriptionmG
metro VH
ttsttHpmHp
FmdttX Vt nV
lzdslzd lXslXp
lzX lzzlz
lze lzs
lzas lzalas lHp lct pH FR
pns Qsp
pne Qst
QtQteQts serial number Range
MK26 26" Mulch Kit • Fits All Units
MK322 32" Mulch Kit • • 102,000 & Above
MK343 34" Mulch Kit • Fits All Units
MK362 36" Mulch Kit • • 115,000 & Above
MK363Q*** 36" Mulch Kit • Fits All Units
116-4247 36" Mulch Kit • Fits All Units
MKNAV42 42" Mulch Kit • Fits All Units
116-1085 42" Mulch Kit • Fits All Units
116-4766 42" Mulch Kit • 920,000 & Above
MK443Q 44" Mulch Kit • • • Fits All Units
116-1108 44" Mulch Kit • Fits All Units
MK465 46" Mulch Kit (Series 5) • 600,000 & Above
MK483Q 48" Mulch Kit• • • • Fits All Units
• • 160,000 & Above
MK486 48" Mulch Kit (Series 4 & 6) • • • Fits All Units
MKNAV48 48" Mulch Kit • Fits All Units
109-5980 48" Mulch Kit • Fits All Units
MK505 50" Mulch Kit (Series 5) • 600,000 & Above
116-4767 50" Mulch Kit (501) • Fits all units
116-6514 50" Mulch Kit (502) • Fits all units
MK523Q*** 52" Mulch Kit
• • • • Fits All Units***
• 130,000 to 319,999
• 130,000 to 259,999
• 440,000, to 599,999
MK526*** 52" Mulch Kit (Series 4 & 6)
• 320,000 & Above
• 260,000 & Above***
• • • Fits All Units
109-5982 52" Mulch Kit • Fits All Units
MK565 56" Mulch Kit (Series 5) • 600,000 & Above
MK603Q 60" Mulch Kit
• 600,000 & Above
• 130,000 to 319,999
• 130,000 to 189,999
MK605 60" Mulch Kit (Series 5)• 600,000 & Above
• 600,000 to 789,999
MK606*** 60" Mulch Kit (Series 4 & 6)
• 190,000 thru 599,999**
• 190,000 thru 599,999; 670,000 & Above***
• 320,000 & Above
• • • • Fits All Units
MK665 66" Mulch Kit (Series 5) • • 600,000 & Above
MK725 72" Mulch Kit (Series 5) • • 600,000 & Above
MK726*** 72" Mulch Kit (Series 4 & 6)
• All Units thru 599,999***
• All Units thru 599,999; 790,000 & Above***
• • Fits All Units
DECK SERIES GUIDESeries 6 = UltraCut™ Series 6 Deck Series 5 = Series 5 DeckSeries 4 = UltraCut Series 4 Deck (Blade bolt diameter changed at s/n 540,000) (s/n 540,000 and higher use 15/16" diameter, red colored blade)
NOTE: *** If you have a machine with s/n below 540,000, your mulch kit will require a blade with 5/8" arbor hole not provided in standard kit.
127126
RID
ER PRO
DU
CTIV
ITY C
HA
RTR
IDER
PRO
DU
CTI
VIT
Y C
HA
RT
Efficiency at 100% and 80%
MPH36" Width 42" Width 44" Width 48" Width 50" Width 52" Width 60" Width 72" Width
100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80% 100% 80%
1.5 0.55 0.44 0.64 0.51 0.67 0.53 0.73 0.58 0.76 0.60 0.79 0.63 0.91 0.73 1.09 0.88
2.0 0.73 0.58 0.85 0.68 0.89 0.61 0.97 0.78 1.01 0.81 1.05 0.84 1.21 0.97 1.45 1.16
2.5 0.91 0.73 1.06 0.85 1.11 0.89 1.21 0.97 1.26 1.01 1.31 1.05 1.52 1.21 1.83 1.45
3.0 1.09 0.87 1.27 1.02 1.33 1.06 1.45 1.16 1.52 1.21 1.58 1.26 1.82 1.45 2.19 1.74
3.5 1.27 1.02 1.48 1.19 1.56 1.24 1.70 1.36 1.77 1.41 1.84 1.47 2.12 1.70 2.54 2.04
4.0 1.45 1.16 1.70 1.35 1.78 1.42 1.94 1.55 2.02 1.62 2.10 1.68 2.42 1.94 2.90 2.33
5.0 1.82 1.45 2.12 1.69 2.22 1.77 2.42 1.94 2.53 2.02 2.63 2.10 3.03 2.42 3.64 2.90
6.0 2.18 1.74 2.55 2.03 2.67 2.13 2.91 2.33 3.03 2.42 3.15 2.52 3.64 2.91 4.37 3.49
7.0 2.55 2.03 2.97 2.37 3.11 2.48 3.39 2.72 3.54 2.83 3.68 2.94 4.24 3.40 5.05 4.08
8.0 2.91 2.32 3.56 2.84 3.88 3.10 4.20 3.36 4.84 3.88 5.80 4.66
8.5 4.12 3.29 4.46 3.56 5.15 4.11 6.18 4.94
9.0 4.36 3.48 4.73 3.77 5.46 4.35 6.53 5.23
9.5 4.61 3.68 4.99 3.98 5.76 4.59 6.90 5.52
10.0 4.85 3.87 5.25 4.19 6.06 5.00 7.27 6.00
11.0 6.66 5.33 8.02 6.42
12.0 7.27 5.81 8.73 6.97
Formulas for calculating acres per hour:100% efficiency MPH x width of cut ÷ 99 = acres per hour80% efficiency MPH x width of cut ÷ 124 = acres per hour
** Two productivity ratings are shown: one at 100% and one at 80% efficiency. Many manufacturers use 100% efficiency ratings for sales purposes. Exmark® Mfg. believes an 80% efficiency rating is more representative of actual mowing conditions as it allows for turns and overlapping.
129128
ENG
INE SPEC
IFICA
TION
S ENG
INE
SPEC
IFIC
ATI
ON
Smodels used on
engine mfg.displacement
cu. in. (cc)engine Rpm
engine model
spec. no. cyl. crank-shaft coolingpressure lube /oil
Filter
oil capacity
Quart (liter)
starting
ECX Honda® 9.9 (163) 3,300 GXV160 160UH2 A1TT 1 vert air no/no .7 (.7) recoilECX (BBC) Honda 9.9 (163) 3,300 GXV160 160UH2 TBE 1 vert air no/no .7 (.7) recoilECS Kawasaki® 10.9 (179) 3,300 FJ180V BM11-M 1 vert air yes/no .7 (.7) recoilECX Kawasaki 10.9 (179) 3,300 FJ180V BM17-M 1 vert air yes/yes .7 (.7) recoilECX (BBC) Kawasaki 10.9 (179) 3,300 FJ180V BM12-M 1 vert air yes/yes .7 (.7) recoilM26, ARS Kawasaki 10.9 (179) 3,600 FJ180V BM09-M 1 vert air yes/yes .7 (.7) recoilSD Honda 16.0 (270) 3,600 GX270 UTQA2 HC 1 vert air yes/yes 1.16 (1.1) recoilSG Honda 12.0 (196) 3,600 GX200 UT QXCP 1 vert air yes/yes .63 (.60) recoilSG Honda 24 (389) 3,600 GX390 UT2 QXCP 1 horz air yes/yes 1.16 (1.1) recoilMG, VH, TTS Kawasaki 36.8 (603) 3,600 FS481V S06-R 2 vert air yes/yes 2.1 (2.0) recoil
TTS Kawasaki 36.8 (603) 3,600 FS541V S23-R 2 vert air yes/yes 2.1 (2.0) recoilSAR Kawasaki 36.8 (603) 3,600 FS481V S25-R 2 vert air yes/yes 2.1 (2.0) electricVT Kawasaki 36.8 (603) 3,600 FS541V S06-R 2 vert air yes/yes 2.1 (2.0) electricNV Kohler® 38.0 (624) 3,600 CH640 PS-CH640-3080 2 horz air yes/yes 2.0 (1.9) electricTTX Kohler 38.0 (624) 3,600 CV640 PS-CV640-3025 2 vert air yes/yes 2.0 (1.9) electricTTS Kawasaki 36.8 (603) 3,600 FS600V S15-R 2 vert air yes/yes 2.1 (2.0) electricLZE, PNS Kawasaki 36.8 (603) 3,750 FX600V S13-R 2 vert air yes/yes 2.1 (2.0) electricTTX Kohler 42.4 (694) 3,600 ECV650 PS-ECV650-3011 2 vert air yes/yes 2.0 (1.9) electricPNS Kawasaki 44.3 (726) 3,750 FX651V S10-R 2 vert air yes/yes 2.2 (2.1) electricVT Kawasaki 44.3 (726) 3,600 FS651V S12-R 2 vert air yes/yes 2.2 (2.1) electricLZS Kawasaki 44.3 (726) 3,750 FX651V S07-R 2 vert air yes/yes 2.2 (2.1) electricPNE Kawasaki 44.3 (726) 3,600 FR651V S13-R 2 vert air yes/yes 2.2 (2.1) electricQTE Kawasaki 44.3 (726) 3,300 FR651V S06-R 2 vert air yes/yes 2.2 (2.1) electricLZS, LZX Kohler 41.1 (674) 3,750 CV680 PS-CV680-3039 2 vert air yes/yes 2.0 (1.9) electricPNS Kohler 41.1 (674) 3,750 CV680 PS-CV680-3046 2 vert air yes/yes 2.0 (1.9) electricTTX Kawasaki 44.3 (726) 3,600 FX691V S13-R 2 vert air yes/yes 2.2 (2.1) electricLZS Kawasaki 44.3 (726) 3,750 FX691V S12-R 2 vert air yes/yes 2.2 (2.1) electricVT Kawasaki 44.3 (726) 3,600 FS691V S12-R 2 vert air yes/yes 2.2 (2.1) electricPNE Kawasaki 44.3 (726) 3,600 FR691V S13-R 2 vert air yes/yes 2.2 (2.1) electricLZE Kawasaki 44.3 (726) 3,750 FX691V S17-R 2 vert air yes/yes 2.2 (2.1) electricQTE, QTS Kawasaki 44.3 (726) 3,300 FR691V S07-R 2 vert air yes/yes 2.2 (2.1) electricLZS Kohler 44.0 (725) 3,750 ECV730 PS-ECV730-3011 2 vert air yes/yes 2.0 (1.9) electricVT Kohler 44.0 (725) 3,600 ECV730 PS-ECV730-3012 2 vert air yes/yes 2.0 (1.9) electricLZE, LZS, LZX Kohler 41.1 (674) 3,750 CV740 PS-CV740-3135 2 vert air yes/yes 2.0 (1.9) electric
LZS, LZX Kohler 41.1 (674) 3,750 CV740 PS-CV740-3122 2 vert air yes/yes 2.0 (1.9) electricNV Kohler 44.0 (725) 3,600 ECH730 PS-ECH730-3018 2 horz air yes/yes 2.1 (2.0) electricNV Kohler 44.0 (725) 3,600 CH740 PS-CH740-3182 2 horz air yes/yes 2.1 (2.0) electricPNS Kohler 41.1 (674) 3,750 CV740 PS-CV740-3138 2 vert air yes/yes 2.0 (1.9) electricVT Kohler 41.1 (674) 3,600 ECV740 PS-ECV740-3013 2 vert air yes/yes 2.0 (1.9) electricLZS, LZX Kohler 45.6 (747) 3,750 ECV749 PS-ECV749-3014 2 vert air yes/yes 2.1 (2.0) electricLZX, LZS Kawasaki 52.0 (852) 3,750 FX801V S04-R 2 vert air yes/yes 1.8 (1.9) electricLZX Kohler 61.0 (999) 3,750 CV940 PS-CV940-2010 2 vert air yes/yes 2.1 (2.0) electricLZX Kohler 60.9 (999) 3,750 CV980 PS-CV980-2012 2 vert air yes/yes 2.1 (2.0) electric
LZDS Kubota® 54.8 (898) 3,850 D902 D902-E3B-EXMK-1 3 horz liquid yes/yes 3.9 (3.7) electric
131130
MO
DEL N
UM
BR
ER C
ROSS R
EFEREN
CE C
HA
RT
HO
RSE
PO
WER
RA
TIN
G S
YSTE
M
2012 exmark numbering
engine horsepower will be replaced with theengine manufacturer’s model number
Benefits:
• Immune to additional hp rating changes if they occur
• Numbers while not exactly displacement are related
• Model numbers increase in a logical manner (i.e. engines with higher hp’s have a larger model number)
Examples:
• LZX34KA606 LZX940KA606
• LZX29KA606 LZX801KA606
• LZX29EKC606 LZX749EKC606
• LZX27KC606 LZX740KC606
Kawasaki2011 2012
16KA 481KA
18KA 541KA
20KA 600KA
22KA 651KA
24KA 691KA
24KA 691KA
29KA 801KA
Kubota2011 2012
25KD 902KD
Kohler2011 2012
20KC 640KC
21EKC 650KC
23KC 680KC
25EKC 730EKC
27KC 740KC
29EKC 749EKC
34KC 940KC
38KC 980KC
sae 1940
• Ratings standard for engine hp
• Tested hp must be within 85% of the rated number
• Hp can be reported as gross or net as long as the appropriate test standard is used for the measurement
sae 1995
• Gross hp test standard
sae 1349
• Net hp test standard
133132
6 TO 6 TEC
HN
ICA
L SUPPO
RT PRO
GR
AM
WA
RR
AN
TY IN
BR
IEF*
in an effort to better serve our dealers, the customer service department extends its support hours during the cutting season.*
monday through Friday 6:00 a.m. to 6:00 p.m.
(Hours are based on Central Time zone.)
Call our Customer Service Department:
(402) 223-6375or E-mail our Service Department at
[email protected]*Cutting season is April through September.
model year
serial number Range model yearserial number
Range
2012 312,000,000 & above 1999 190,000-219,999
2011 920,000-999,999 1998 150,000-189,999
2010 850,000-919,999 1997 130,000-149,000
2009 790,000-849,999 1996 115,000-129,999
2008 720,000-789,999 1995 102,000-114,999
2007 670,000-719,999 1994 90,000-101,999
2006 600,000-669,999 1993 80,000-89,999
2005 510,000-599,999 1992 70,000-79,999
2004 440,000-509,999 1991 60,000-69,999
2003 370,000-439,999 1990 50,000-59,999
2002 320,000-369,999 1989 40,000-49,999
2001 260,000-319,999 1988 30,000-39,999
2000 220,000-259,999 1987-earlier 29,999 and Below
Unit type CommerCial ConsUmer
CommerCial riders & Front moUnt deCksLazer Z DS-SeriesNavigatorWarranty Exceptions
Bags, Belts & TiresBatteryEngine*
2 Year Limited
90 Days1 Year Prorated2 Years**
2 Year Limited
90 Days1 Year Prorated2 Years**
Lazer Z X-SeriesLazer Z S-SeriesVantageWarranty Exceptions
Bags, Belts & TiresBatteryEngine*
3 Year Limited
90 Days1 Year Prorated2 Year - Kawasaki2 Year - Kohler**
5 Year or 750 Hours Limited (one time P & D allowed)
90 Days1 Year Prorated3 Year - Kawasaki2 Year - Kohler**
Lazer Z E-Series
Warranty ExceptionsBags, Belts & TiresBatteryEngine*
2 Year Limited
90 Days1 Year Prorated2 Year - Kawasaki2 Year - Kohler
4 Year or 500 Hours Limited (one time P & D allowed)90 Days1 Year Prorated3 Year - Kawasaki2 Year - Kohler
Pioneer S-SeriesWarranty Exceptions
Bags, Belts & TiresBatteryEngine*
2 Year Limited
90 Days1 Year Prorated2 Years
4 Year or 500 Hours Limited90 Days1 Year Prorated3 Years
Pioneer E-SeriesWarranty Exceptions
Bags, Belts & TiresBatteryEngine*
1 Year Limited
90 Days1 Year Prorated2 Years
4 Year or 500 Hours Limited90 Days1 Year Prorated3 Years
Quest S-SeriesQuest E-SeriesWarranty Exceptions
Bags, Belts & TiresBatteryEngine*
30 Day Limited
90 Days1 Year Prorated2 Years
3 Year Limited
90 Days1 Year Prorated3 Years
Walk-BehindsCommercial Walk-Behinds (exclude 26" & 21") 2 Years 2 Years
26" & 21" Mowers 1 Year 1 YeartUrF management prodUCts20" Slicer Seeder, 21" Aerator, 24" Aerator,30" Stand-On Aerator, 18" Turf Rake, Stump Grinder 200 & Stump Grinder 390
1 Year Limited 1 Year Limited
aCCessoriesAccessories (except as noted below) 1 Year Limited 1 Year Limited
Striping Roller & OCD01 (accessories) 90 Days 90 Days
Quest Accessories 30 Day Limited 1 Year Limited
misCellaneoUsPeerless 5-Speed Transmission 2 years (extended 21 months beyond
manufacturer's warranty of 90 days)
Bags, Belts and Tires 90 Days 90 DaysBattery 1 Year Prorated Year ProratedEngine* Warranty is covered by engine manufacturer.See warranty statements for complete details. *Please refer to the engine manufacturer's warranty statement that is included in the literature packet. We are not authorized to handle warranty adjustments on engines. This warranty only includes the cost of parts and labor. **Kohler powered EFI units offer a 3 Year commercial warranty.