1
1500-2000pcs/hour PET Bottle Production Line
2
Quotation List
No. Descriptions Capacity Qty Total Price
(USD) Remark
Part 1 Semi-automatic Bottle Blowing Machine
1 Blow Molding Machine RM-9A 1 pc
19,500
1Main Machine
2 blower
2 HP Air Compressor 1.2m3/mim30Kg 1 pc /
3 Air dryer 2.0 m3/min 30kg 1 pc /
4 Air filter 2.0 m3/min 30kg 2pcs /
5 Mould
250, 500, 1000,
1500, 2000,
3000ml
1 pc
Iron Mould
Part 2: Injection Machine
1 Injection Molding M/C RM-950A 1 pc 16,800 Stainless Steel
2 Hopper Dryer
50kg 1 pc 1200 /
3 200kg 1 pc 1,650 /
4 Auto Loader 300Kg/hr 1 pc 1150 /
5 Crasher PC-180 1 pc 1300 /
6 Chiller 3hp 1 pc 3,000 /
7 Mould /
250, 500,
1000,
1500,
2000,
3000ml
8000
/
Total: USD 52,600 CFR Chittagong Port
The Quotation Valid in 30 Days
Terms and Conditions
1. Payment Method
1. 20% by T/T & 80% by LC as within 7 days the contract signed
3
2 . Mechanical Warranty
One year warranty and come with at least one year recommended spare parts
3. Delivery & Packing
Ø Delivery Time: 30 days after get down payment & bottle/label samples
Ø Coming Document:
1) Machine Quality Guarantee
2) Complete set install & maintain instruction Book in English language
3) Complete Document for customer to clear its custom
Ø Packaging requirement:
1) The special packaging box is according to the immunity standard in China,it suits for long-distance
transport, damp proof, rustproof, land way and seaway
2) Transportation ways: Sea transportation
4. Install in Spot
If Engineers install in spot
1) Installment USD100/day. Person as allowance
2) Training fee is free for customer’s workers within the installation period
3) The tickets from China to the customer factory and return paid by the customer
4) The local housing, food, and transfer cost at customer factory paid by the customer
Detailed Specification
Note: All Machines’ Pictures Below Are For Your Reference!
Part 1 : Semi-automatic Bottle Blowing Machine
4
1.Capacity:1500-2000pcs/hr (based on 500ml ) for two blower .
2. Max volume of product: 2 liters
Technique Parameter of blow molding machine:
Main parameter:
Model RM-9A
5
Container
Product material PET
Volume 0.3L-2L
Theoretical output 1600-2000PCS/H
Preform length 15mm-400mm
Preform inner diameter Φ10mm-160mm
Moulding
Max.mould plate Dimenstion(L x
W) 400x460mm
Max.mould thickness 300mm
Clamping force 65KN
Mould opening stroke 28mm
Machine size and weight
Main machine (L x W x H) 175*67*186RM
Main machine weight 600Kg
Heater (L x W x H) 187*63*145RM
Heater weight 250Kg
Power 17.5kw
Air compressor:
Air compressor Unit 1.2M3/30KG
Volume M3 1.2
Pressure Kg 30
Speed r/min 800
Power KW 18.5
Overall Dimension mm 2000*1100*16
00
Weight kg 620
Air Dryer:
Refrigeration Air Dryer Unit 2.0M3/3.0Mpa
Flow capacity Nm3/min 2.0
W.P Mpa 3.0
Inlet Temp. ℃ ≤80
Dew point ℃ 23
6
Ambient Temp. ℃ ≤38
Power supply V/HZ 220/50
Compressor power Kw 0.75
Cold Medium R22
Overall Dimension mm 1050×650×1100
Weight Kg 120
Air Filter:
Refining-Filter Unit 2.0M3/30Kg
Flow Capacity M3/Min 2
Max. work pressure Mpa 3.0
Inlet Temp. ℃ ≤50
Overall Dimension mm 750*350*350
Weight kg 20
Trait:
RM-9A Semiautomatic bottle blow molding machine can produce PET containers including the bottles for kinds of
wine, drink,soybean, vinegar, and pesticide (less than 5liters) according to the different bottle shape and
diameter.
Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the
perform ,the perform rotated and heated equally.
The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the
different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing
large irregular shaped bottles.
The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
The machine can be operated in the step-by-step mode and the semi-auto mode.
The machine is small with low investment, easy and safe to operate.
Part 4 : RM-950A Injection Machine
Features:
Injection moulding machine Adopting Europe technology,hydraulic unit adopts proportional pressure and flow
control,the pressure and the speed can be adjusted,stable movement curve and gentle shock,the computer is
7
imported from Industry family. The LCD displaying screen with high clarity has Chinese and English language to
use. Close-loop PID temperature control with the advantage of high precision. The operating table of the injection
moulding machine have two safety, one is machine safety, another is electrical safety, that ensures the
operators’s safety.
Mould Our mould producing center produces exact mould ,adopts the high grade material to make. The perform
mould uses the hot runner technology, inside uses the imported steel, the surface’s brightness is very high and
the service time is very long.
The design of equipment is logical, easily operation.
The automatic level is very high, the wage is very little.
Using famous imported hydraulic, electrical, sealing parts, the trouble is low.
No matter what the product’s outside or inside, they can get the best guarantee, the good products rate can be
above 99%.
Details pictures of main machine
8
Auxuliary parts
1
Hopper Dryer Auto Loader
2
Water Chiller Crusher
9
Products show
A. Injection Unit
10
A01 Five Stage Injection Pressure
A02 Five Stage Injection Speed
A03 Programmable Holding Pressure profile
A04 Refilling in Stages
A05 Controller Inbuilt PID Temperature control
A06 Feed Zone Temperature indication
A07 Oil temperature indication
A08 Adjustable such back before and after refilling
A09 Auto sprue break
A10 Linear transducer to control programmable injection position
A11 Cold start screw prevention
A12 Sliding Mechanism for hopper
A13 Gas Nitrated hardened screw and Barrel
A14 Screw back pressure con troll with pressure relief valve
A15 Hand Operated Lubrication Unit
B. Clamping Unit
B01 Five Point twin toggle locking system
B02 Case Hardened toggle, Brackets and links with hardened PIN & BUSH
B03 Motorized mould height adjustment for quick mould change
B04 Auto tonnage setting facility
B05 Low pressure precise mould protection with pressure and time setting
B06 Five stage Mould closing
B07 Five stage Mould opening
B08 Hydraulic cushioning for consistent mould opening position
B09 Linear transducer to control programmable clamp system
B10 Electrical and hydraulic (Dump value) interlock safety gate
B11 Moving platen with mechanical support with Teflon
B12 Hydraulic Ejector with Multi stroke
B13 Auto lubrication unit
11
C. Ejector
C01 Linear transducer to control programmable ejector position
C02 Multiple stroke ejection
C03 Ejector forward/ backward speed adjustable
C04 Ejector forward/ backward pressure adjustable
C05 Two stage in ejector forward/ backward operation
C06 Additional safety of sensing ejector backward position with proximity switch
12
D. Hydraulic
D01 Compact and Simple design
D02 Sealing ring imported from Japan, a total four leak-proof protection to prevent the oil leakage.
D03 Proportional value for pressure and speed
D04 Variable displacement pump system attached with pulse absorber
D05 High magnetic closed-loop oil filter to effectively remove debris of the oil, the filtration is up to 10um.
D06 Easy access to hydraulic elements for ease maintenance
E. Controller
E01 Display type LCD QVGA B/W of 5.7 “with 100 membrane keys
E02 Multi-CPU control, with 32 bit
E03 Precise temperature control, the precision is of ±1 degree
E04 Four forms of switch at the end of injection, they are time, location, pressure, and speed.
E05 Breaker and air switch are imported from Japan, the brand of Micro switch is Omron
E06 Instruction cycle time of controller in 0.4 microseconds
Technical Data for SZ-950A Injection moulding machine
13
Item Unit Data
Max. clamping force KN 950
Max. opening force mm 340
(V×H)Space between tie bars mm 360×360
(min-max)Mould height mm 135-380
Max. daylight mm 720
Ejector force KN 25.4
Ejector stroke mm 85
Ejector quantity 5
Screw diameter mm 30 35 40
Screw L/D ratio L/D 24.5 21 18.4
Theoretical shot volume cm3 113 154 201
Plasticising weight(PS) g 103 140 183
Injection pressure Mpa 249 183 140
Theoretical injection rate(PS) g 67.5 91.8 120
Plasticising capacity(PS) g/s 8.3 12.5 18
Screw torque N.m 510
Max. screw rotate speed r/min 260
Injection stroke mm 160
Pump motor power KW 11
Pump pressure Mpa 16
Heating power KW 7.3
Heating zone 4
Size m 4.25×1.2×1.8
Net weight t 3.2
International designation 950-280
Parts Specification
Spare parts brand origin
1 Hydraulic plastising motor ZY Italy
2 Hydraulic pump YUKEN Japan
3 Proportional hydraulic valve YUKEN Japan
4 Reversal valve YUKEN Japan
5 Transducer LION Japan
14
6 Sealing rings VALQUA Japan
7 Pressure match LIMING Italy/Japan
8 Auto lubrication system ISHAN China&Japan
9 High pressure oil pump KIMBERLEY Germany
10 Contactor SHINAIDE France
11 Solid State Relay FORTEK Taiwan
12 Air break switch SIHNAIDE France
13 Computer control JINGHUA Taiwan
14 High temperature
wire
------------- Japan
15 Limited switch NATIONAL Japan
16 Proximity switch FORTEK Taiwan
15
Our Certificates