Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
~ UKAS I'IHJIIU(I"
C U! IH K SI ION
0113
PO Box No 195
Bucknalls Lane
Garston Watford
.Accredited to ISOIIEC Hertfordshire 17065;2012 to provide w025 SBA
product conformity certification
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Contact: Mrs Clalre Alzlewood
Tel:
Website: www.bbacerts.co.uk
Locations where certification activities covered by the above Accreditation Standard are undertaken
British Board of Agrement PO Box 195 Bucknalls Lane Garston Watford Herts. WD25 9BA United Kingdom
Assessment Ma~ager: GL Page 1 of 24
BBA00010736_0001 BBA00010736/1
Schedule of Accreditation Issued by
~ United Kingdom Accreditation Service 2 Pine Trees Chertse Lane, Staines-u on-Thames TW18 3HR UK
UKAS f'RllllU(r
(IJ(TII'IC\liON British Board of Agrement
0113 Issue No: 025 Issue date: 20 October 2017
Accredited to ISOIJEC 17065:2012 to provide product
conformity certification
Product
DETAIL OF ACCREDITATION
At the last review of Document BBA 001 the following standards were included within the scope of accreditation. Other standards may have since been added using the flexible scope arrangements.
Standard
Building Systems and Kits BBA Technical Specifications 001 to 0013 and BBA Document BBA 001
Ceiling Products
Concrete and Plaster Products
Heating and Ventilation Products and Systems
Finishes
Floor Products
Highway Works, Products and Systems
Jointing Products, Components and Materials
Masonry Products
Roof and Roofing Products and Systems
Drainage and Plumbing Products and Systems
Wall and Cladding Products and Systems
Window, Door and Opening Products and Systems
Assessment Manager. GL Paga 2 of24
BBA00010736_0002 BBA00010736/2
Schedule of Accreditation issued by
~ United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane, Staines-u on·Thames, TW18 3HR UK
U KAS l'llf)l)l}(l
CWI"IFICSIION
0113 British Board of Agrement
Issue No: 025 Issue date: 20 October 2017 Accredited to ISOIIEC
17065:2012 to provide product conformity cert!ftcatlon
Product
Environmental Profiles of Construction Products
Metal Anchors for use in Concrete Part 1: Anchors In General (97/177/EC)
Metal Anchors for use in Concrete Part 2: Torque controlled Expansion Anchors (97/177/EC)
Metal Anchors for use in Concrete Part 3: Undercut Anchors (97/177/EC)
Metal Anchors for use in Concrete Part 4: Deformation-Controlled Expansion Anchors (97/177/EC}
Metal Anchors for use in Concrete Part 5: Bonded Anchors (97/177/EC)
Metal Anchors for use in Concrete Part 6: Anchors for Multiple use for Non-Structural Applications (97/177/EC)
Structural Sealant Glazing Systems (SSGS) Part 1: Supported and Unsupported Systems (96/582/EC)
Structural Sealant Glazing Systems (SSGS) Part 2: Coated Aluminium Systems (96/582/EC)
Structural Sealant Glazing Systems (SSGS) Part 3: Systems incorporating Profiles with a Thermal Barrier (96(582/EC)
International Partition Kits for use as Non Load-Bearing Walls (2001/596/EC)
Assessment Manager; GL
Standard
• BRE Scheme Document SO 028
ETAG 001
····----
ETAG 001
ETAG 001
ETAG 001
ETAG 001
ETAG 001
ETAG 002
ETAG 002
ETAG 002
ETAG 003
-
Page 3 of24
BBA00010736_0003 BBA00010736/3
Schedule of Accreditation Issued by
~ United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane Staines-u on-Thames, TW18 3HR UK
UI\AS I'IIODU(f
CHHif'l(~\ liON
0113 British Board of Agrement
Issue No: 025 Issue date: 20 October 2017 Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Product
External Thermal Insulation Composite Systems with Rendering (2001/596/EC)
Liquid Applied Roof Waterproofing Kits Part 1: General (2001 1596/EC)
Systems of Mechanically Fastened Flexible Roof Waterproofing Membranes (98/143/EC)
Timber Frame Building Kits (99/455/EC)
Prefabricated Stair Kits in General (excluding severe climatic conditions) (2001/596/EC)
Non Load-Bearing Permanent Shuttering Kits/Systems based on Hollow Blocks or Panels of Insulating Materials and sometimes Concrete (2001/596/EC)
Self Supporting Translucent Roof Kits (2001/596/EC)
Light Composite Wood-Based Beams and Columns (99/92/EC)
Log Building Kits {99/455/EC)
Post-Tensioning Kits for Pre-stressing of Structures (98/456/EC)
Plastic Anchors for Fixing of External Thermal Insulation Composite Systems with Rendering (97/463/EC)
Three-Dimensional Nailing Plates (97/638/EC)
A5sessment Manager: GL
Standard
ETAG 004
ETAG 005
ETAG 006
ETAG 007 ..
ETAG 008
ETAG 009
ETAG 010
ETAG 011
ETAG 012
ETAG 013
ETAG 014
ETAG 015
Page4 of 24
BBA00010736_0004 BBA00010736/4
Schedule of Accreditation issued by
~ United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane. Staines-u on-Thames, TW18 3HR UK
UKAS I'IUJDUC f
CI'HIIf'IC.\TION
0113 British Board of Agrement
Issue No: 025 Issue date: 20 October 2017 Accredited to ISO/IEC
17065:2012 to provide product conformity certlfication
Product
Self~Supporting Composite Lightweight Panels Part 1: General (94/23/EC)
Self~Supporting Composite Lightweight Panels Part 2; Specific Aspects Relating to Self-Supporting Composite Lightweight Panels for use in Roofs (94/23/EC)
Self-Supporting Composite Lightweight Panels Part 3: Specific aspects relating to Self-Supporting Composite Lightweight Panels for use in External Walls and Claddings (94/23/EC)
Self-Supporting Composite Lightweight Panels Part 4: Specific.Aspects Relating to Self-Supporting Composite Light Panels for use in Internal Walls and Ceilings (94/23/EC)
Veture Kits ~ Prefabricated Units for External Wall Insulation (2001/308/EC)
Fire Protective Products Part 1: General (2001/596/EC)
Fire Protective Products Part 2: Reactfve Coatings for Fire Protection of Steel Elements
Fire Protective Products Part 3: Renderings and Rendering Kits for Fire Resisting Applications
Fire Protective Products Part 4: Fire Protective Board, Slab and Mat Products and Kits
Pre-Fabricated Wood-Based Load~Bearing Stressed Skin Panels (94/23/EC)
Plastic fixings for masonry/stonework (non-structural)
Assessment Manager. GL
Standard
ETAG 016
ETAG 016
ETAG 016
ETAG 016
ETAG 017
ETAG 018
ETAG 018
ETAG 018
ETAG 018
ETAG 019
ETAG 020
Page 5 of24
BBA00010736_0005 BBA00010736/5
Schedule of Accreditation issued by
~ United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Staines-u on-Thames TW18 3HR UK
UKAS 1'1(0(11.1( l
<:UntFICAII!lN
0113 British Board of Agrement
Issue No: 025 Issue date: 20 October 2017 Accredited to ISO/IEC
17065:2012 to provide product conform lty certification
Product
Cold Storage Premises Kits Part 1: Room Kits (2005/484/EC)
Cold Storage
Watertight covering kits for wet room floors and/or walls Part 1: Liquid applied coverings with or without wearing surface
Watertight covering kits for wet room floors and/or walls Part 2: Kits based on flexible sheets
Watertight covering kits for wet room floors and/or walls Part 3: Kits based on inherently watertight boards
Inverted roof insulation kits
Liquid applied roof waterproofing kits
Thermal Insulation Products for Buildings- Factory Made Mineral Wool (MW) Products. Specification
Thermal Insulation Products for Buildings - Factory Made Products of Expanded Polystyrene. Specification
Thermal Insulation Products for Buildings- Factory Made Products of Extruded Polystyrene Foam {XPS). Specification
Thermal Insulation Products for Buildings - Factory Made Rigid Polyurethane Foam (PUR) Products. Specification
Thermal Insulation Products for Buildings~ Factory Made Products of Phenolic Foam (PF). Specification
Thermal Insulation Products for Buildings -Factory Made Cellular Glass (CG) Products. Specification
Assessment Manager: G L
Standard
ETAG 021
ETAG 022
ETAG 022
ETAG 022
ETAG 031
ETAG 033
BS EN 13162:2012+A1:2015
BS EN 13163:2012+A2:2016
BS EN 13164:2012+A1:2015
BS EN 13165:2012+A2:2016
BS EN 13166:2012+A2:2016
88 EN 13167:2012+A1:2015
Page6 of 24
BBA00010736_0006 BBA00010736/6
Schedule of Accreditation issued by
~ United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-ur.on·Thames, TW18 3HR, UK
U KAS I'IH)IlliCl
CHtllriCSIIUN
0113 British Board of Agrement
Issue No: 025 Issue date: 20 October 2017 . Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Product
Thermal Insulation Products for Buildings- Factory Made Wood Wool (WW) Products. Specification
Thermal Insulation Products for Buildings- Factory Made Products of Expanded Perlite (EPS). Specification
Thermal Insulation Products for Buildings - Factory Made Wood Fibre (WF} Products. Specification
Wood~Sased Panels for use In Construction. Characteristics, Evaluation of Conformity and Marking
Timber Structures. Structural Laminated Veneer Lumber. Requirements
Timber Structures- Connectors- Requirements
Timber Structures. Dowel-type fasteners. Requirements
Admixtures for Concrete, Mortar and Grout. Concrete Admixtures. Definitions, Requirements, Conformity, Marking and Labelling
Specification for Masonry Units. Autoclaved Aerated Concrete Masonry Units
Specification for Mortar for Masonry. Masonry mortar
Thermal insulation products for buildings- In situ formed loose-fill mineral wool (MW) Part 1: Specification for the loose fill products before installation
Assessment Manager: GL
Standard
BS EN 13168:2012+A1:2015
BS EN 13169:2012+A1:2015
BS EN 13171:2012+A1:2015
SS EN 13986:2004+A1:2015
BS EN 14374:2004
SS EN 14545:2008
BS EN 14592:2008+A1:2012
BS EN 934-2:2009+A 1:2012
BS EN 771-4:2011 +A 1 :2015
BS EN 998~2:2016
BS EN 14064~1 :2010
Page 7 af24
BBA00010736_0007 BBA00010736/7
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Stalnes-upon-Thames, TW18 3HR, UK
0113 British Board of Agrement
Issue No: 025 Issue date: 20 October 2017 . Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Product
Windows and doors- Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire andfor smoke leakage characteristics
Flexible sheets for waterproofing- Bitumen damp proof sheets including bitumen basement tanking sheets -Definitions and characteristics
Assessment Manager: GL
Standard
BS EN 14351-1:2006+A2:2016
BS EN 13969:2004
Page 6 of 24
BBA00010736_0008 BBA00010736/8
Schedule of Ace redi talion Issued by
United Kingdom Accreditation Service ~ 2 Pine Trees Chertse. Lane Staines-u pn-Thames TW18 3HR .UK
U KAS l'ltOD!.JCI
Cllli'IHC·\'IION
0113 British Board of Agrement
Issue No: 025 Issue date: 20 October 2017 Accredited to iSO/IEC
17065:2012 to provide product conformity certification
Product Standard
The certification systems used for the above are one or more of the following:
• Type testing or examination • Product evaluation • Design appraisal
These can be coupled with assessment and surveillance of production, the supplier's quality system and/or installation sites,
Where appropriate a:
• European Technical Approval, or • Certificate or Statement of Conformity, or • BBA Agrement Certificate • Certificate of factory production control
Will be issued to the supplier along with (if relevant) a license to use the· appropriate mark of conformity.
Micro•generatibn Product .certif!Mtion
Solar Collectors Solar Photovoltaic Panels Micro and Small Wind Turbines Heat Pumps Biomass Heat-led Micro- Co Generation Packages Electricity Led Micro Go-Generation Packages
Bespoke Building Integrated Photovoltaic Products
Pitched Roof Installation Kits
Assessment Manager: GL
DECC Scheme Requh'ematlts
MCS 004- Solar Collectors MCS 005" Solar Photovoltaic Panels MCS 006 - Micro and small wind turbines MCS 007- Heat Pumps MCS 008- Biomass MCS 014- Micro CHP MCS 015 - Electricity Led Micro Go-Generation Packages MCS 017-Bespoke Building Integrated Photovoltaic Products MCS 012-Pitched Roof Installation Kits MCS 010 (Generic Factory Production Control) MCS 011 (Testing and acceptance criteria)
Page 9 of24
BBA00010736_0009 BBA00010736/9
~ rl
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees Chertse. Lane Stalnes-u on-Thames, TW18 3HR UK
LJI<AS I'IW!JU(l'
CUll"ll"lCHION
0113 British Board of Agrement
Issue No: 025 Issue date: 20 October 2017 Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Product
Installation of following measures:
Cavity Wall Insulation Loft Insulation Pitched Roof Insulation Flat Roof Insulation Internal Wall Insulation ExternaiWall Insulation Hybrid Wall Insulation Draught Proofing Floor Insulation Energy Efficient Glazing and Doors Room in Roof Insulation
Installation of insulating material to the internal walls of a building, not including the installation of flexible thermal linings
Installation of Insulating material to the external walls of a building, not including the insulation of demountableclad buildings
Installation of Insulating material to the external and internal walls of a building (''hybrid insulation"), not including the insulation of demountable-clad buildings, and not including the installation of flexible thermal linings
Standard
PAS 2030:2017 Specification for the installation of energy efficiency measures (EEM) ln existing buildings Edition 4- February 2017
PAS 2031:2017 Certification of energy efficiency measure (EEM) installation in existing buildings Edition 3- March 2017
DCLG Conditions of Authorisation October 2015
And
The Competent Person Scheme 'BBA Solid Wall Insulation Competent Person Scheme' In accordance with the Building Regulations 2010 (as amended)
END
Assessment Manager: GL Page 10 of24
BBA00010736_0010 BBA00010736/10
~ UI<AS l'IH)I H.iCl
nnnHcsnoN
0113
Accredited to ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation Issued by
United Kingdom Accreditation Service 2 Pine Trees Chertse Lane. Staines-upon-Thames, TW18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking into account eA2117 and relevant requirements of ISO 17025
Directive/Regulation Conforlty Category of products or Essential Assessment individual products requirements:Product procedure/Module specification/ /Article Properties/Standards _
The Construction Annex V- FPC 97/555fEC EN 197-1:2000 Products Regulation Certification Body Cements, building limes and EN 197-1:2000/ A1:2004 (EU) No 305/2011 (AVCP) other hydraulic binders : - EN 197-1:2000/A3:2007
System 2+ Common cements, including: - EN 197-1:2011 Portland cement, -Portland composite cements: Portland-slag cement, Portland-silica fume cement, Portland-pozzolana cement, Portland-fly ash cement, Portland-burnt shale cement, Portland-limestone cement, Portland composite cement, -Blastfurnace cements, -Pozzolanic cements,-Composite cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products)
The Construction Annex V- Product 97/555/EC EN 459-1:2010 Products Regulation Certification Body Cements, building limes and EU) No 305/2011 (AVCP) other hydraulic binders : -
System 1 Building limes, including: -Calcium limes, -Dolomitic limes, -Hydraulic limes {preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).
The Construction Annex V- FPC 97/740/EC EN 771-4:2011 Products Regulation Certification Body Masonry and related products (EU) No 305/2011 (AVCP) (1/3) : - Masonry units category I
System 2+
Assessment Manager: G L Page 11 of 24
BBA00010736_0011 BBA00010736/11
0113
Accredited to ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Staines-u on-Tham_~s TW18 3HR,UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking into account EA2117 and relevant requirements of ISO 17025 ..
D I rectivefReg u I atio n Confority Category of products or Essential Assessment individual products requirements :Product procedurefModule specification/ /Article Prqperties/Standards
The Construction Annex V- Testing 97/740/EC EN 845-1;2003+A1:2008 Products Regulation Laboratory Masonry and related products (EU) No 305/2011 (AVCP) (2/3) :-Ties (in wails and
System 3 partitions), Tension straps (in walls and partitions), Joist hangers (in walls and partitions), . Brackets (in walls and partitions).
The Construction Annex V- Testing 97/740/EC EN 845-2:2003 Products Regulation Laboratory Masonry and related products (EU) No 305/2011 {AVCP) (2/3) : - Lintels (in walls and
System 3 partitions).
Annex V- FPC 99/469/EC EN 934-2:2009 Certification Body Products related to concrete, (AVCP) mortar and grout (112) : ~ System 2+ Admixtures (for concrete, mortar
and grout).
Annex V- FPC 97/740/EC EN 998-2:2010 Certification Body Masonry and related products (AVCP) (1/3) : ~ Factory-made,designed System 2+ masonry mortars (in walls,
columns and partitions).
Assessment Manager: GL Page 12 of 24
BBA00010736_0012 BBA00010736/12
~ UKAS l'lt01.HI(J"
CUtllfiC\TII,lN
0113
Accredited to ISO/IEC 17065:2012 to provide product
conformity cert!ficat!on
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Stalnes-l! on-Thames .• TW18 3HR UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking into account EA2f17 and relevant - requirements of ISO 17025
D irective/Reg ulatio n Confority Category of products or Essential Assessment individual products requlrements:Product procedurefModule spec lfic atio n/ /Article Properties/Standards
The Construction Annex V- FPC 98/214/EC EN 1 090-1 :2009 Products Regulation Certification Body Structural metallic products and EN 1 090-1 :2009+A 1:2011 (EU) No 305/2011 (AVCP) ancillaries {2/4) : -Structural EN 1090-1 :2009/AC:201 0 (cont'd) System 2+ metallic construction members:
finished metallic products such as trusses, girders, columns, stairs, ground piles, bearing piles and sheet piling, cut to size sections designed for certain applications, and rails and sleepers. They can be unprotected or protected against corrosion by coating, welded or not. (for uses in work's frames and foundations)
Annex V- FPC 99/469/EC EN 1504-2:2004 Certification Body Products related to concrete, EN 1504-3:2005 (AVCP) mortar and grout (1/2) : - EN 1504-4:2004 System 2+ Concrete protection and repair EN 1504-5:2004
products EN 1504-6:2006 EN 1504-7:2006
--.
Annex V- FPC 98/601/EC EN 12271:2006 Certification Body Road construction products (1/2) EN 12273:2008 (AVCP) : - Surface treatments {for System 2+ surface treatments of roads).
Assessment Manager: GL Page 13 of 24
BBA00010736_0013 BBA00010736/13
~ UKAS I'I!OI.Ill(T
CfltiiFlC\TION
0113
Accredited to !SO/lEG 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Staines-u on-Thames, TW18 3HR, UK
British Board of Agrement Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant
··- requirements of ISO 17025
Directive/Regulation Conforliy Category of products or Essential Assessment individual products requirements: Produ et procedure/Module specification/ /Article Prq[)_erti as/Standards
The Construction Annex V- FPC 98/601/EC EN 13108-1:2006 Products Regulation Certification Body Road construction products (1/2) EN 13108-1 :2006/AC:2008 (EU) No 305/2011 (AVCP) : - Bituminous mixtures (for road EN 13108-2:2006 (cont'd) System 2+ construction and surface EN 13108-2;2006/AC:2008
treatment of roads). EN 13108-3:2006 EN 13108-3:2006/AC:2008 EN 13108-4:2006 EN 13108-4:2006/AC:2008 EN 13108-5:2006 EN 13108-5:2006/AC:2008 EN 13108-6:2006 EN 131 OB-6:2006/AC:2008 EN 13108-7:2006 EN 131 08-7:2006/AC:2008
Annex V- Testing 99/91/EC EN 13162:2008 Laboratory Thermal insulating products EN 13163:2008 (AVCP) (1/2) : -Thermal insulating EN 13164:2008 System 3 products EN 13165:2008
EN 13166:2008 EN 13167:2008 EN 13168:2008 EN 13169:2008 EN 13170:2008 EN 13171:2008 EN 14064-1:2010
Annex V- Product 99/91/EC EN 13162:2008 Certification Body Thermal insulating products EN 13163:2008 (AVCP) (2/2) : - Thermal insulating EN 13164:2008 System 1 and products EN 13165:2008
EN 13166:2008 Annex V- Testing EN 13167:2008 Laboratory EN 13168:2008 (AVCP) EN 13169:2008 System 3 EN 13170:2008
EN 13171:2008 EN 14064-1:2010
Assessment Manager: GL Paga 14 of24
BBA00010736_0014 BBA00010736/14
~ U KAS l'll(II)(IC/
O:IUIHC\ liON
0113
Accredited to ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane Staines-u on-Thames, TW18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
.Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO 17025
Directive/Regulation Confority Category of products or Essential Assessment individual products requirements:Product procedure/Module specification! /Article Properties/Standards
The Construction Annex V- FPC 99/90/EC EN 13707:2004+A2:2009 Products Regulation Certification Body Membranes (1/3):- Roof sheets EN 13956:2005 (EU) No 305/2011 (AVCP) (in buildings). EN 13956:2005/AC:2006 (cont'd) System 2+
Annex V- Product 99/90/EC EN 13707:2004+A2:2009 Certification Body Membranes {2/3) : - Roof sheets EN 13956:2005 (AVCP) (for uses subject to reaction EN 13956:2005/AC:2006 System 1 to fire regulations).
Annex V- FPC 98/601/EC EN 13808:2005 Certification Body Road construction products (1/2) EN 14023:2010 (AVCP) : - Bitumen (for road System 2+ construction and surface
treatment of roads).
Annex V- FPC 99/90/EC EN 13967:2004 Certification Body Membranes (1/3):- Damp EN 13967:2004/A 1:2006 (AVCP) proofing sheets (in buildings). EN 13969:2004 System 2+ EN 13969:2004/A 1 :2006
Annex V- Product 97/462/EC EN 13986:2004 Certification Body Wood-based panels (1/2) :-(AVCP) Unfaced overlaid and veneered System 1 and or coated wood-based panels
(for structural elements in Annex V- FPC Internal or external applications). Certification Body (AVCP) System 2+
Annex V- Product 97/462/EC EN 13986:2004 Certification Body Wood-based panels (2/2) : -(AVCP) Unfaced, overlaid and veneered System 1 or coated wood-based panels
(for non structural elements in internal or external applications) ..
Assessment M~n~ger; GL Page 15 of 24
BBA00010736_0015 BBA00010736/15
~ U I< AS l'ltOIHI(J
CI.I!TliiC\ liON
0113
Accredited to ISO/IEC 17085:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane. Stalnes-u cin-Thames, TW18 3HR UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO 17025
Directive/Rag ulation Confority Category of products or Essential Assessment individual products requirements: Product procedure/Module specification/ /Article Pro_12erties/Standards
The Construction Annex V- Testing 98/436/EC EN 14351-1:2006+A1:2010 Products Regulation Laboratory Roof coverings, rooflights, roof (EU) No 305/2011 (AVCP) windows and ancillary (cont'd) System 3 products (6/6)
AnnexV- Testing 99/93/EC EN 14351-1:2006+A1:2010 Laboratory Doors, windows, shutters, (AVCP) blinds, gates and related System 3 building
hardware (1/1) :
Annex V- Product 97/176/EC EN 14374:2004 Certification Body Structural timber products (1/3) (AVCP) and (2/3) System 1
Annex V- FPC 97/638/EC EN 14545:2008 Certification Body Fasteners for structural timber ETAG 015 (AVCP) products (111 System 2+
Annex V- FPC 98/601/EC EN 14695:201 0 Certification Body Road construction products (1/2) (AVCP) :-Bridge deck waterproofing -
System 2+ products and kits (for bridge decks).
Annex V~ Testing 97/176/EC EN 14592:2008 Laboratory Structural timber products (3/3) : (AVCP) -Fasteners for structural System 3 timber products
Assessment Manager: GL Page 16 of 24
BBA00010736_0016
BBA00010736/16
~ UI<AS I'II(HHICI
<:Eitllf'U:,\liON
0113
Accredited to JSO/IEC 17065:2012 to provide product
conformlty certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane, Stalnes-u on-Thames, TW18 3HR, UK
British Board of Agrement Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO 17025
Directive/ Reg u I atlo n Conforlty Category of products or Essential Assessment individual products requirements:Product procedure/Module specification/ /Article Properties/Standards
The Construction Annex V- Product 99/469/EC EN 14889-1:2006 Products Regulation Certification Body Products related to concrete, EN 14889-2:2006 (EU) No 305/2011 (AVCP) mortar and grout (1/2):- Fibres (cont'd) System 1 (for structural uses in concrete,
mortar and grout)
Annex V- FPC 99/94/EC Precast normal/ EN 15037-4:2010 Certification Body lightweight/ autoclaved aerated (AVCP) concrete products (1/1): -System 2+ Precast normal/ lightweight/
autoclaved aerated concrete products (for structural use},
Annex V- Product 99/469/EC EN 15167-1:2006 Certification Body Products related to concrete, (AVCP) mortar and grout (1/2) : -System 1+ Additions (Type 11) (for concrete,
mortar and grout),
Annex V- Product 96/582/EC ETAG 001 - 1 Certification Body Metal anchors for use in ETAG 001-2 (AVCP) concrete (mechanical fasteners) ETAG 001-3 System 1 ,, - ETAG 001-3 Amendment
Metal anchors for use in ETAG 001-4 concrete (heavy-duty type) (for ETAG 001-5 fixing ETAG 001-6 and/or supporting concrete ET AG 001 - 6 Amendment structural elements or heavy units such as cladding and suspended ceilings),
Annex V- Product 97/177/EC ETAG 001-5 Certification Body Metal injection anchors for use (AVCP) in masonry (1/1) : - Metal
.System 1 injection anchors for use in masonry
Assessrnent Manager; GL Page 17 of24
BBA00010736_0017 BBA00010736/17
~ V
UKAS I'IIOI)UCr
conuu.·,\nON
0113
Accredited to ISO/IEC 17065:2.012 to provlde product
confonnlty certification
Schedule of Accreditation Issued by
United Kingdom Accreditation Service 2 PineTrees, Chertsa. Lane Staines-u on-Thames TW18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking into account EA2117 and relevant reQuirements of 15017025
Oirective!Reg u lation Conforlty CategorY of products or l:ssential Assessment Individual products requirements;Product procedure/Module specification/ /Article Properties/Standards
The Construction Annex V- FPC 97/463/EC ETAG 001-6 Products Regulation Certification Body Plastic anchors for use in ETAG 001 -6 Amendment (EU) No 305/2011 (AVCP} concrete and masonry (1/1) ETAG 014 (cont'd) System 2+
Annex V- Product 96/582/EC ETAG 002-1 Certification Body Structural sealant glazing kits of ETAG 002-2 (AVCP) types (curtain walling) :- ETAG 002-3 System 1 Structural sealant glazing kits,
Types 11 and IV (for external walls and roofs).
Annex V- FPC 96/582/EC ETAG 002-1 Certification Body Structural sealant glazing kits of ETAG 002-2 (AVCP) types (curtain walling) : - ETAG 002- 3 System 2+ Structural sealant glazing kits,
Types I and Ill (for external walls and roofs).
Annex V- Product 98/213/EC ETAG 003 Certification Body Internal partition kits (1/5) (AVCP) System 1
Annex V- Product 97/556/EC ETAG 004 Version Certification Body External thermal insulation 08/2011 (AVCP) composite systems/kits with System 1 and rendering (ETICS)(1/1}:-
Annex V- FPC Certification Body (AVCP) System 2+
Assessment Manager; GL Page HI of 24
BBA00010736_0018 BBA00010736/18
~ UKAS I'HOOliCT
cmnncAIION
0113
Accredited to ISO/IEC 17065:201210 provide product
conformity certlflcati on
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane Stalnes-u on- Thames, TW1 8 3HR, UK
British Board of Agrement Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking Into account EA2/17 and relevant requirements of ISO 17025
Directive/Rag ulation Confority Category of products or Essential Assessment individual products requirements: Product procedure/Module specification/ /Article Properties/Standards
The Construction Annex V- Product 98/279/EC ETAG 004 Version 08/2011 Products Regulation Certification Body Non load bearing permanent ETAG 009 (EU) No 305/2011 (AVCP) shutterings; kits/systems based (cont'd) System 1 and on hollow blocks or panels of
insulating materials and, Annex V- FPC sometimes, concrete {1/1) Certification Body (AVCP) System 2+
Annex V- Product 98/599/EC ETAG 005 Certification Body Liquid applied roof waterproofing (AVCP} kits (3/3) : - Liquid applied System 1 roof waterproofing kits (for uses
subject to reaction to fire regulations)
Annex V~ FPC 98/143/EC ETAG 006 Certification Body Systems of mechanically (AVCP) fastened flexible roof System 2+ waterproofing membranes (1/1)
Annex V- Product 99/455/EC ETAG 007 Certification Body Timber frame and log ETAG 012 (AVCP) prefabricated building kits (1/1) System 1
Annex V- FPC 99/89/EC ETAG 008 Certification Body Prefabricated stair kits (1/2) (AVCP) System 2+
Annex V" Product 99/89/EC ETAG 008 Certification Body Prefabricated stair kits (2/2) (AVCP) System 1
Assessment Manager: GL Page 19 of24
BBA00010736_0019 BBA00010736/19
~ V
UKAS I'IIOI.H_!Cf
CUll I rtCAIION
0113
Accredited to ISOIIF:C 17065:2012 to provide product
conformity certmcatlon
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees, Chertse Lane Stalnes-u on-Thames TW18 3HR UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO 17025
D irective/Reg ulatio n Confority Category of products or Essential Assessment Individual products requIrements :Product procedure/Module specification/ /Article Properties/Standards
The Construction Annex V- Product 98/600/EC ETAG 010 Products Regulation Certification Body Self-supporting translucent roof (EU) No 305/2011 (AVCP) kits (except glass-based kits) (cont'd) System 1 (3/3)
Annex V- Product 99/92/EC ETAG 011 Certification Body Light composite wood-based (AVCP) beams and columns (1/1) System 1
Annex V- Product 98/456/EC ETAG 013 Certification Body Post-tensioning kits for the (AVCP) prestresslng of structures (1/1} System 1+
Annex V~ Product 2000/447/EC ETAG 016 ·1 Certification Body Prefabricated wood-based load- ETAG 016-2 (AVCP) bearing stressed skin panels ETAG 016-3 System 1 and self-supporting composite ETAG 016-4
lightweight panels (3/6)
Annex V- Product 99/454/EC ETAG 018-1 Certification Body Fire stopping, fire sealing and ETAG 018-4 (AVCP) fire protection products (1/2) and ETAG 018-4 Amendment System 1 (2/2)
Annex V- Product 2000/447/EC ETAG 019 Certification Body Prefabricated wood-based load-(AVCP) bearing stressed skin panels System 1 and self-supporting composite
lightweight panels (1/6) and (3/6)
Assessment Manager: Gl Page 20 of 24
BBA00010736_0020
BBA00010736/20
~ V
UKAS l'IIOt'>UCf
(l;llTWI(AIION
0113
Accredited to ISOfiEC 17065:2012 to provide .product
conformity certiflcatlon
Schedule of Accreditation issued by
United Kingdom Accreditation Service __ 2 Pine Trees, Chertsex lane, Stalnes-u12_on-Thames, TW1 B 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking into account EA2117 and relevant requirements of ISO 17025
Directive/Rag u lation Confority Category of products or Essential Assessment individual products requirements: Product procedure/Module specification/ /Article Pro pe rti es/Standa rds
The Construction Annex V- FPC 2003/655/EC ETAG 022-1 Products Regulation Certification Body Watertight coverings kits for ETAG 022-2 (EU) No 305/2011 (AVCP) wetroom floors and walls (1/2 ETAG 022-3 (cont'd) System 1 and
Annex V- FPC Certification Body (AVCP) System 2+& 2+
Annex V- FPC 2003/655/EC ETAG 022-1 Certification Body Watertight coverings kits for ETAG 022-2 (AVCP) wetroom floors and walls (2/2) ETAG 022-3 System 1 & 2+
Annex V- FPC 2003/722/EC ETAG 033 Certification Body Liquid-applied bridge deck (AVCP) waterproofing kits;-System 2+ Liquid-applied bridge deck
waterproofing kits (in bridge decks).
Annex V- Product 2003/728/EC ETAG 023 Certification Body Metal frame building kits, (AVCP) concrete frame building kits, System 1 prefabricated building units, cold
storage room kits and rock-fall protection kits : -Prefabricated building units (in building works).
Assessment Manager: GL Page 21 of 2:4
BBA00010736_0021 BBA00010736/21
~ UKAS l'll(ll) UC I
t:WTIHG\li(JN
0113
Accredited to ISO/IEC 17065:2012 to provide product
conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Stalnes-u on-Thames TW18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO 17025
Directive/Rag ulation Confority Category of products or Essential Assessment individual products requirements:Product
. procedure/Module specification! /Article Properties/Standards
The Construction As a Technical Annex IV -Product Areas 1. Precast normal I lightweight Products Regulation Assessment Body I autoclaved aerated concrete (EU) No 305/2011 (TAB) for products. (cont'd) developing
European 2. Doors, windows, shutters, Assessment gates and related building Documents hardware.
3. Membranes, including liquid applied and kits (for water and/or water vapour control)
4. Thermal insulation products. composite insulating kits I systems.
6, Chimneys, flues and specific products
7. Gypsum products
8. Geotextiles, geomembranes, and related products.
9. Curtain walling I cladding I structural sealant glazing.
12. Circulation fixtures: road equipment
13. Structural timber products I elements and ancillaries.
14. Wood based panels and elements.
15. Cement, building limes and other hydraulic binders.
Assessment Manager: GL Page 2.2. of 24
BBA00010736_0022
BBA00010736/22
- .:·"
0113
Accredited to ISO/lEG. 17065:2012 to provide product
conformity certlflcatlon
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Staines-u on-Thames" TW18 3HR UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking Into account EA2117 and relevant requirements of ISO 17025
Directive/Regulation Confority Category of products or Essential Assessment individual products requirements:Product procedure/Module specification/ /Article P ropertles/Standards
The Construction As a Technical Annex IV -Product Areas 16. Reinforcing and Products Regulation Assessment Body (cant' d) prestressing steel for concrete (EU) No 305/2011 (TAB) for (and ancillaries). post (cont'd) developing tensioning kits
European Assessment 17. Masonry and related Documents products. masonry units, (cont'd) mortars, and ancillaries.
18. Waste water engineering products
19. Floorings.
20. Structural metallic products and ancillaries.
21. Internal & external wall and ceiling finishes. Internal partition kits
22. Roof coverings, roof lights, roof windows, and ancillary products. roof kits
23. Road construction products.
24. Aggregates
25. Construction adhesives
26. Products related to concrete, mortar and grout.
27. Space heating appliances
28. Pipes~tanks and ancitlaries not in contact with water intended for human consumption
Assessment Manager: GL Page 23 of24
BBA00010736_0023 BBA00010736/23
~ V UKAS I'UODUCI
(I:I!I'IIICAliON
0113
Accredited to ISOIIEC 17065:2012 to provide product
conform lty certification
Schedule of Accreditation Issued by
United Kingdom Accreditation Service 2 Pine Trees Chertse Lane Staines-u on-Thames, TW18 3HR, UK
British Board of Agrement
Issue No: 025 Issue date: 20 October 2017
Accreditation for the purpose of Notified Body Activity taking into account EA2f17 and relevant rl:!quirements of ISO 17025
Directive/Rag ulation Confority Category of products or Essential Assessment individual products requirements:Product procedurefModule specification/ /Article Properties/Standards
The Construction As a Technical Annex IV -Product Areas 29. Construction products in Products Regulation Assessment Body (cont'd) contact with water intended (EU) No 305/2011 (TAB) for for human consumption (cant' d) developing
European 30. Flat glass, profiled glass Assessment and glass block products Documents (cont'd) 32. Sealants for joints
33. Fixings
34.Building kits, units, and prefabricated elements.
END
Assessment Manager: GL Page 24 of24
BBA00010736_0024 BBA00010736/24