1. What’s new in SmartTool?
2. What can SmartTool do for my borehole?
3. Meet the hardware
4. MeasureIT software that sets-up, runs, calculates & checks.
5. Practical exercises with the SmartTool.
6. DisplayIT software, showing off the results.
7. The Single-shot StoreIT menus.
8. The Multi-shot StoreIT menus.
Training modules
SensIT & StoreIT --ten years power - built in,
no batteries or chargers.
no plugs or cables
1 What’s new --
Shock resistant to 6000G
1 What’s new --
SensIT in its pressure barrel
Watertight to 4000 metres
Shockproof to 6000g
2 What can SmartTool do for me? --
Four different tasks
Single-shot survey ----- read data on StoreIT ----- combine data on PC to make …
Multi-shot survey 3D hole path using magnetic azimuth measurement
Orientated survey ----- less than 30m, close to vertical 3D hole path maintaining azimuth with orientation rods
Tool or Core orientation, usingGravity roll angle ---- for inclined holesMagnetic toolface angle --- for vertical holes
Eight measurements at each DEPTH (shot) recorded by SensIT
1 Dip (Inclination) of hole 2 Direction (azimuth) of hole for Positional Survey
5 Magnetic field strength 6 Magnetic dip angle for Quality Assurance
3 Gravity Roll angle of SensIT 4 Toolface angle of SensIT for Orientation
7 Temperature of SensIT 8 Depth, time and datefor the record
2 What can SmartTool do for me? --
The Earth’s Gravitational Field
If Grav. Field is not 1.00 G, then SensIT is moving; Dip and Azimuth may both be unreliable
2 What can SmartTool do for me? --
Quality assurance.
The Earth’s magnetic field
Variation - angular difference between True North and Magnetic North
Magnetic Field Strength - the force of the earth's magnetic field
Magnetic Dip Angle - angle the field force lines make with the horizontal
At each place on the earth's surface, these values are known.
2 What can SmartTool do for me? --
Quality assurance.
Set the threshold for the local magnetic environment
2 What can SmartTool do for me? --
Quality assurance.
1. What’s new in SmartTool?
2. What can SmartTool do for my borehole?
3. Meet the hardware
4. MeasureIT software that sets-up, runs, calculates & checks.
5. Practical exercises with the SmartTool.
6. DisplayIT software, showing off the results.
7. The Single-shot StoreIT menus.
8. The Multi-shot StoreIT menus.
Training modules
1. What’s new in SmartTool?
2. What can SmartTool do for my borehole?
3. Meet the hardware
4. MeasureIT software that sets-up, runs, calculates & checks.
5. Practical exercises with the SmartTool.
6. DisplayIT software, showing off the results.
7. The Single-shot StoreIT menus.
8. The Multi-shot StoreIT menus.
Training modules
DATA, Shows Survey SETTINGS #, Hole Ref. & Depth Timer } +/-
Azimuth Depth }3 +/
Inclination Hole ref. } +/- OK
Mag Field Enter Archive OK
Mag Dip Set Mag Field/Dip OK
G.R/angle Zero G.R/angle OK
M.T/face Zero M.T/face OK
Time Set time +/- OK
Date Set date +/- OK
Temperature Multi-shot mode? OK
>>Press SETTINGS to exit >>Press NEW to start timer
Here the DATA button displays each reading from a Single-shot survey.
7 The StoreIT Single-shot menus
First survey press New Next Survey press New
SETTINGS 1 Change SETTINGS 2 Change SETTINGS 3
Hole ref. } Next Depth Hole ref.
Start depth } Depth interval Start depth
Depth interval } 5 End survey Depth interval
Direction } >>Press DATA Direction
Time interval } to continue survey End session -download
Set time >>Press DATA
Set date for next survey
Single-shot mode?
>>Press DATA for first survey
• Here the DATA button is only a switch from the SETTINGS menus back to the survey operation. Then, to start a survey, press NEW
8 The StoreIT Multi-shot menus