1
Product Technical Document
©2009 Panasonic Communications CO., LTD. Communication Network CompanyIssued by Approved by Checked by Prepared by
S. Mitsuo T. Yoshida K. Ryu R. Nonaka
July 14, 2009 July 10, 2009 July 10, 2009 July 9, 2009
Note : - Specifications are subject to change without notice. - Specifications for TDA and NCP in this document are for reference. - TDA50 is model name of TDA30 in US market. - This document is not applied for Japan market.
Rev.1.3 July 14, 2009
Copy toPanasonic sales companyRepresentative sales agencyPRDCMPCCUK / PCCSW / PCC-OST
KX-TDE100-200 MPR V2.01KX-TDE100-200-600 MPR Version 3
Product Specification
Title
H-CAB-A-E-10000KX-TDE100 / KX-TDE200 / KX-TDE600
Document NO.Model Name
Total Page : 19
2
Revision Item Explanation Prepared by0.1 All 1st draft R. Nonaka
May 30, 2008
0.2 All 2nd draft R. NonakaAugust 26, 2008
1.0 All Official releaseContent does not change from revision 0.2.
R. NonakaSeptember 8, 2008
1.1 ABCDEF
Features based on market request are added. R. NonakaNovember 6, 2008
1 32 IP-GW(H.323) + 32 SIP-GW for V3Total 32 ch for V2
2 Feature Enhancement for SIP SLT step 2 TDE MPR V3 => V4
13 TDE100-200 SMDR : 10,000 callsTDE600 SMDR : 20,000 calls
RevisionRevision
3
Revision Item Explanation Prepared by1.2 A Condition is added to conference improvement. R. Nonaka
December 15, 2008
G CSTA “Button Press” works without “Enhanced Feature” activation key.
H Default data is revised.
1 More than 49ch talking is under study for More than 49ch talking is under study for V4.V4.
13 Condition is added to SMDR expansion.
1.3 ABCD1
These were planned at version 4 for NCP.(Previous information was “V4 Study”)
R. NonakaJuly 9, 2009
25
SIP extension more enhancement and IP expansion card were dropped from version 4 for TDE and NCP.(Previous information was “V4 Study”)
6 ESVM hardware on TDE100-200 MPR is updated to new version. Mass production change is informed by PCR.
H Default of dial tone is revised from 10s to 250s.
RevisionRevision
4
Feature EnhancementFeature EnhancementNo. Feature Explanation NCP TDEA Conference feature improvement
- Broadcast feature supports 2nd mode newly. 1) Broadcasting mode (Same as current spec) Max.32 parties / one way talk at first 2) Group call conference mode Max.8 parties / 2 way talk without operation by coordinator- Public CO call is supported for broadcast feature (both modes).- Remote users can join during broadcasting (both modes) through DISA using PIN, even if they could not answer call from coordinator. DISA is released automatically after join.- Broadcast member can be assigned by CSTA as well as PCMC.
MPRV4
(Planned)
MPR V3TDA : N/ATDA : N/A
KX-TDEKX-TDE DISA Record conference to Softphone Record conference to Softphone
N/AN/A
ForFor
USAUSA
5
Feature EnhancementFeature EnhancementNo. Feature Explanation NCP TDE
B Common extension numbering for 2 or more PBXs
- Only for H.323 supported by MPR card
MPRV4
(Planned)
MPR V3
TDA : N/ATDA : N/A
Tokyo OfficeFukuoka Office
2nd Floor
IP Network
201 306 103
1st Floor
101 102 205
301 104 105
6
Feature EnhancementFeature EnhancementNo. Feature Explanation NCP TDEC CLIP of extension which set Fwd can be informed to
ISDN by option.MPRV4
(Planned)
MPR V3
D ARS for dial 011 and 0 is supported.
- Even if ARS for dial 011 (International call from North America) is assigned, dial 0 (call operator of telephone company) is available.
MPRV4
(Planned)
MPR V3
E DECT distinctive ringing for ICD group call is supported.
- This feature can be enabled by PCMC sales company level.
MPR V2
MPR V3
F Softphone controlled by MPR also can be tried without activation key, when user can log in to CA Pro trial mode.
- Software version up of XP/Vista/Mobile Softphone (in CA) is not required for this improvement. - XP/Vista Softphone controlled by IP extension card has trial mode since version 1.
MPR V2
MPR V3
TDA : N/ATDA : N/A
TDA : N/ATDA : N/A
TDA : N/ATDA : N/A
TDA : N/ATDA : N/A
7
Feature EnhancementFeature EnhancementNo. Feature Explanation NCP TDEG CSTA “Button Press” works without “Enhanced
Feature” activation key.
- Communication Assistant version 2 supports transfer retrieve. “Button Press” is used for the feature.
MPR V2
MPR V3
H Default data is revised.
- Built in Communication Assistant : “Disable” to “Enable”- Hold Tone to IP-PT : Change to same tone as TDA- Flash key mode : “Recall” to “EFA” (Only for USA and Canada)
- Dial Tone Timer : 10s to 250s -10s was not enough for CA user and NT400 user to search contact for transfer. - Dial tone for TD1232 does not have timer limitation. - This default change helps the UCD agents with held call to make their status busy for more long time by keeping the phone off-hook. Even this timer expires a hold recall will take the place of it to keep their status busy. (Currently UCD agent may receive new other incoming call after hold + 10s dial tone and 10s reorder tone.)
MPR V2
MPR V3
TDA : N/ATDA : N/A
TDA : N/ATDA : N/A
8
Feature EnhancementFeature EnhancementNo. Feature Explanation NCP TDE
1 128 IP-PT by MPR card is supported.
MPRV4
(Planned)
MPR V3
2 Feature enhancement for SIP-SLT Step 2
- Unscreened Transfer for SIP-SLT except KX-HGT100. - PBX feature support by dial “flexible numbering” step 2
MPRV4
Drop
MPRV4
Drop
2A Feature enhancement for SIP-SLT Step 1
- Unscreened Transfer for Panasonic KX-HGT100. - PBX feature support by dial “flexible numbering” step 1
MPR V2
MPR V3
Virtual Card in MPR MPR V2 Limitation
32ch IP-PT Card(incl. Softphone)
2 cards(64ch) 4 cards
(128ch)32ch SIP Ext Card 4 cards
(128ch)
16ch SIP CO Card 2 cards(32ch) 3 cards
(32ch)16ch IP-GW Card 2 cards
(32ch)
TDA : N/ATDA : N/A
TDA : N/ATDA : N/A
TDA : N/ATDA : N/A
*1) 32(V2) -> 64(V3) is *1) 32(V2) -> 64(V3) is supportedsupported..*2) 49ch talking at the same time except IP extension P2P talk.*2) 49ch talking at the same time except IP extension P2P talk. More than 49ch talking is More than 49ch talking is planned for V4planned for V4..
MPR V3
4 cards(128ch)
8 cards(192ch)
*2)
2 cards(32ch) 4
cards(64 ch)
*1)
2 cards(32ch)
9
No. Feature Explanation NCP TDE3 Built-in Communication Assistant and NT400 are
supported.
-Specification is basically same as CA for NCP1000.
-Max. 128 users (NT400 : 64)
- Log-in user number without activation key is as follows. < CA > < PA > Reference
MPR V1
MPRV2for
NT400
MPR V3
4 CTI for system wireless extension is supported.
- Specification is basically same as NCP1000.
MPR V2
MPR V3
Feature EnhancementFeature Enhancement
PBX CA Pro Trial(60 days)
CA Basic(No limit)
NCP1000 2 users 5 users
TDE100-200 4 users 10 users
TDE600 8 users 20 users
PBX PA Pro Trial(60 days)
PAExpress
(No limit)
TDA30/50 2 users 5 users
TDE100-200
4 users 10 users
TDE600 8 users 20 users
TDA : N/ATDA : N/A
TDA : N/ATDA : N/A
Actually 240 CA is supported by TDE (Not NCP) Actually 240 CA is supported by TDE (Not NCP) without PCMC sales company levelwithout PCMC sales company level programming programming. But official spec is 128. . But official spec is 128.
10
Total 128 ch with IP Extension in MPR *) 49 ch talking at the same time
Feature EnhancementFeature EnhancementNo. Feature Explanation NCP TDE
5 IP-CS is supported.
- Specification is basically same as NCP1000.
MPR V2
MPR V3
PBX A. IP-CS 8 ch
B. D-PT CS8 ch
C. Other CS2ch / 4 ch
MAX.CS
B x 2 + C
MAX.CS
(A+B) x 2 + C
NCP500 8 units 2 units 4 units 4 ---
NCP1000 8 units 4 units 8 units 8 ---
TDE100-200
16 units 16 units 32 units --- 32
TDE600 16 units 64 units 128 units --- 128
TDA : N/ATDA : N/A
Virtual Card for32 ch IP-PT Card or 32 ch SIP Ext Card
Virtual Cardfor 4 IP-CS IP-CS
4 cards / 128 ch 0 card 0 unit / 0 ch
3 cards / 96 ch 1 card 4 units / 32 ch
2 cards / 64 ch 2 cards 8 units / 64 ch
1 card / 32 ch 3 cards 12 units / 96 ch
0 card / 0 ch 4 cards 16 units / 128 ch
more 48 units with IP Expansion Card (MPR V4 : Study) = Total 64 units (Target)=> IP Expansion Card was dropped from version 4.
11
Feature EnhancementFeature EnhancementNo. Feature Explanation NCP TDE
100200
TDE600
6 Music on Hold by ESVM card is supported.
- One ch of ESVM card is occupied only for one MOH.
- New hardware version (for high quality recording) is recommend for music on hold feature.
*) ESVM hardware on TDE100-200 MPR is updated to new version. Mass production change is informed by PCR. MPR V3 software supports both ESVM old and new hardware version.
MPR V2
MPR V3
MPR V3
SVM Card Hardware Version CH
on NCP500-1000 MPR New 2
on TDE100-200 MPR Old to New *) 2
on TDE600 MPR New 2
ESVM2 / ESVM4 for OPB3 New 2 / 4
TDA : N/ATDA : N/A
PBX ESVM Card Max. Installation
Music on Hold Max. CH
NCP500-1000 4 cards 1 ch by external + 6 ch by ESVM
TDE100-200 4 cards 2 ch by external + 6 ch by ESVM
TDE600 16 cards 2 ch by external + 6 ch by ESVM
12
Feature EnhancementFeature EnhancementNo. Feature Explanation NCP TDE
100200
TDE600
7 Screened transfer from cellular phone is supported as well as unscreened transfer.
- Screened transfer to extension (# + Ext No.)- Screened transfer using paging (# + *33 + Group No.)- Conference (# + Ext No. + # + 3)
MPR V2
MPR V3
MPR V3
8 DDI number for cellular extension is informed as CLIP when call is made through DISA from cellular phone.
- Currently caller ID of cellular phone or CLIP on CO line is informed.
MPR V2
MPR V3
MPR V3
9 Busy Display by DSS Key when cellular phone is busy. MPRV1
MPRV3
MPR V3
10 Intercept for call forwarded to CO (cellular phone, network extension and so on) is supported.
MPRV1
MPRV3
MPR V2
11 Transfer recall to Intercept destination is supported.Transfer recall to VM Group is supported.
MPR V1
MPR V2.01
MPR V2
TDA : N/ATDA : N/A
TDA : N/ATDA : N/A
TDA : N/ATDA : N/A
TDA30/50-100-200 : MPR V5TDA30/50-100-200 : MPR V5
TDA600 : N/ATDA600 : N/A
TDA30/50-100-200 : MPR V5TDA30/50-100-200 : MPR V5
TDA600 : N/ATDA600 : N/A
13
Feature EnhancementFeature EnhancementNo. Feature Explanation NCP TDE
100200
TDE600
12 Hotel “Cleaned Up” button is supported.- Operation using PT is basically same as [Check-in] button. - Control from CTI is also available.
MPR V1
MPR V3
MPR V2
13 SMDR Expansion by MEC card is supported.
- KX-TDE0105 works for TDE100-200 as well as TDE600.
*) SMDR 10,000 calls + Hotel 8,000 calls are available by PCMC sales company level with MEC.
MPR V4
Study
MPR V3
MPR V3
PBX SMDR Hotel
w/o MEC with MEC w/o MEC with MEC
TDA30/50 200 calls N/A N/A N/A
TDA100-200 200 calls 4,000 calls N/A 4,000 calls
TDA600 1,000 calls 4,000 calls N/A 8,000 calls
NCP500-1000 200 calls N/A 1,000 calls N/A
TDE100-200 V2 200 calls N/A 4,000 calls N/A
TDE100-200 V3 200 calls 10,000 calls 4,000 calls 4,000 calls
TDE600 V2 1,000 calls 4,000 calls 4,000 calls 8,000 calls
TDE600 V3 *) 1,000 calls 20,000 calls 4,000 calls 4,000 calls
TDA30/50-100-200 : MPR V5TDA30/50-100-200 : MPR V5
TDA600 : N/ATDA600 : N/A
14
Feature EnhancementFeature EnhancementNo. Feature Explanation NCP TDE
100200
TDE600
14 2 CLIP for one extension is supported.
- ARS itemized code can be 2nd CLIP by option.
MPR V2
MPR V3
MPR V2
15 Automatic recover from analog CO busy out is supported.
MPR V2
MPR V3
MPR V2
16 One channel activation key is supported.
- One channel activation key for TDE600 works for TDE100-200 also.
MPR V1
MPR V2.01
MPR V2
17 Message waiting for Panasonic SIP-SLT KX-HGT100 is supported.
MPR V1
MPR V2.01
MPR V2
18 Public SIP CO compatibility is increased.
*) Compatibility list is informed by different document.
MPR V2
MPR V2.01
MPR V3TDA : N/ATDA : N/A
TDA : N/ATDA : N/A
TDA : N/ATDA : N/A
TDA30/50-100-200 : MPR V5TDA30/50-100-200 : MPR V5
TDA600 : N/ATDA600 : N/A
TDA30/50-100-200 : MPR V5TDA30/50-100-200 : MPR V5
TDA600 : N/ATDA600 : N/A
15
ReferenceReference
16
Main OfficeMain Office Remote OfficeRemote Office
Roaming to Remote Office by IP CSRoaming to Remote Office by IP CS
- You can use your DECT handset in branch office or home,- You can use your DECT handset in branch office or home, as well as in main office. as well as in main office.
CS
KX-TDE / NCPKX-TDE / NCP
IP-CS
IP-CSIP Network
DECT
DECT
D-PT
IP-PT
CS
17
Main OfficeMain Office Remote OfficeRemote Office
CTI for PSCTI for PS
CS
- Wired telephone is removed from some advanced office.- Wired telephone is removed from some advanced office. All of extension users have PS instead of D-PT. All of extension users have PS instead of D-PT. - When user is working with PC on desk, user wants to dial from- When user is working with PC on desk, user wants to dial from Phone book in PC and sets Fwd using PC. (Same as D-PT user) Phone book in PC and sets Fwd using PC. (Same as D-PT user)
=> Target : Business application such as Communication Assistant=> Target : Business application such as Communication Assistant
IP-CS KX-TDE / NCPKX-TDE / NCP
IP Network
18
Busy DisplayBusy Display by DSS keyby DSS key when Cellular Phone as Extension is on the phone when Cellular Phone as Extension is on the phone
Telephone NetworkTelephone Network (Fukuoka : 092) (Fukuoka : 092)
KX-TDE / NCPKX-TDE / NCP
Cellular NetworkCellular Network (080) (080)
Telephone NetworkTelephone Network (Yokohama : 045) (Yokohama : 045)
Customer(045-123-4567)
Main : 092-477-1100DDI : 092-477-11xx
DSS key for 102 becomes red, even when ICD group call is received by the paired cellular phone, or even when call is made by the paired cellular phone through PBX using DISA.
Cellular Phone as ExtensionCellular Phone as Extension
Extn103Extn102
Extn 202Cell Phone
(080-1111-9922)
Extn101PT
(092-477-1111)ICD Group
Extn102PT
(092-477-1122)
Extn 202Virtual PS
(092-477-1122)
ScreenedTransfer
092-477-1122 can be informed to network as CLIP when call from cellular phone.
19
End of DocumentEnd of Document