Transcript
  • www.pajarito.de Tel.: 02104 / 3000-0 www.pajarito.de Tel.: 02104 / 3000-0

    * For all corner cut-outs, also diagonal. * Exact fi tting of door frames, heating pipes, roundings etc. * Suitable for the laying of design fl oors, parquet, laminate and tiles.

    www.pajarito.de Tel.: 02104 / 3000-0

    Pajafl oor MultispiderArt.-Nr. EAN* Beschreibung VE

    444 034865 Pajafloor Komplettset 1

    444G 035589 Pajafloor Grundset 1

    Zubehör

    444/1 035824 Grundplatte 450 mm 1

    444/2 035831 Grundplatte 200 mm 1

    444/3 035848 Klemmschlitten 1

    444/4 035855 Verbindungsstange 1

    444/5/250 035862 Tastarm 250 mm 1

    444/5/350 035879 Tastarm 350 mm 1

    444/5/500 035886 Tastarm 550 mm 1

    444/6 035893 Taster spitz/spitz 1

    444/7 035909 Taster rund/rund 1

    444/8 035916 Taster spitz außen 1

    444/9 035923 Taster spitz innen 1

    1x Grundplatte 444/12x Tastarm 444/5/2502x Tastarm 444/5/3504x Klemmschlitten 444/34x Taster spitz/spitz 444/6

    2x Grundplatte 444/1 + 444/22x Tastarm 444/5/2502x Tastarm 444/5/3502x Tastarm 444/5/5501x Verbindungsstange 444/46x Klemmschlitten 444/34x Taster spitz/spitz 444/62x Taster rund/rund 444/71x Taster spitz außen 444/81x Taster spitz innen 444/9

    * For all corner cut-outs, also diagonal. * Exact fi tting of door frames, heating pipes, roundings etc. * Suitable for the laying of design fl oors, parquet, laminate and tiles.

    www.pajarito.de Tel.: 02104 / 3000-0

    Pajafl oor Video

    Beschreibung VEPajafl oor MultispiderPajafl oor Multispider

    DBGM

    III Made in Germany Made by Pajarito

    seit über 90 Jahren

    Art.: Nr.: 444KomplettsetKomplettsetKomplettset

    Art.: Nr.: 444GGrundsetGrundsetGrundsetDBGM

    NEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEUNEU

  • Mount the sleds on the base rail in the required number.

    Now the probes will be connected with the outlet rods.

    After that it will be clamped on the base plate with the saddles.

    The corresponding corner points are now scanned and the extension rods and buttons are fi xed by means of the knurled screw.

    Following the corner points will be transferred to the element to be cut and cut out.


Top Related